Professional Documents
Culture Documents
Please read this manual carefully to learn about all the functions of the
Contents
Usage and Safety Precautions 2
Introduction 3
Part Names 4
Restoring the
to its Factory
Default Settings 32
Warning
Caution
Battery handling
Install the batteries with the correct +/- orientation.
Use a specified battery type. Do not mix new and old batteries or
different brands or types at the same time. When not using the unit
for an extended period of time, remove the batteries from the unit.
If a battery leak should occur, wipe the battery compartment and
the battery terminals carefully to remove all battery residue.
Other symbols
Required (mandatory) actions.
Volume
Do not use the product at a loud volume for a long time.
Prohibited actions.
Warning
Operation using an AC adapter
Use only a ZOOM AD-16 AC adapter with this unit.
Usage Precautions
Interference with other electrical equipment
In consideration of safety, the
Do not use do anything that could exceed the ratings of outlets and
Alterations
farther apart. With any type of electronic device that uses digital
control, including the
Cleaning
Use a soft cloth to clean the panels of the unit if they become dirty.
If necessary, use a damp cloth that has been wrung out well. Never
Precautions
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids to enter the unit.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or near splashing water.
Do not use in places with excessive vibrations.
Do not use in places with excessive dust or sand.
AC adapter handling
When disconnecting the AC adapter from an outlet, always pull the
body of the adapter itself.
During lightning storms or when not using the unit for a long time,
disconnect the power plug from the AC outlet.
Malfunction
If the unit becomes broken or malfunctions, immediately
disconnect the AC adapter, turn the power OFF and disconnect
other cables. Contact the store where you bought the unit or
ZOOM service with the following information: product model, serial
number and specific symptoms of failure or malfunction, along
with your name, address and telephone number.
Copyrights
Windows, Windows Vista , Windows 7 and Windows 8
are trademarks or registered trademarks of Microsoft.
Macintosh and Mac OS are trademarks or registered
trademarks of Apple Inc.
All other trademarks, product names and company names
mentioned in this documentation are the property of their
respective owners.
Note: All trademarks and registered trademarks mentioned in this manual
are for identification purposes only and are not intended to infringe on the
copyrights of their respective owners.
Introduction
Acoustic modeling restores body tone
Introduction
Presets for 16 body types and 28 model types simulate the sonic characteristics of a variety
of acoustic guitars with different body shapes and material properties. By choosing a body
and model according to the guitar that you are using, you can share the original rich and
beautiful tone of your acoustic guitar with audiences when you perform live.
Clean boost of up to 12 dB
The Boost function can reduce the volume differences of fingerpicking, strumming chords and
other guitar playing techniques, as well as increase amplification during solos. You can also
adjust the sound when the boost is active with the TONE parameter.
Part Names
Left Panel
Top Panel
Body type selector
Part Names
Headphones
Equalizer knobs
Balance knob
OUTPUT jacks
USB
connector
Anti-feedback
footswitch
PA system
Anti-feedback
switch
Effect footswitch
Rear Panel
Computer
DC9V AC
adapter jack
Microphone
input jack
Microphone
Right Panel
Part Names
Effect switch
Boost footswitch
Acoustic Guitar
Pickup type selection switch
Use to set the best input characteristics
for the type of pickup used.
Boost switch
BALANCED
OUT connector
GROUND switch
Use this switch to connect or disconnect
the BALANCED OUT connector with the
ground.
Lower the volume of any connected amplifier or other audio equipment all
the way.
Turn the connected amplifier or other audio equipment ON and raise its
volume.
Display information
Virtual knob
HINT
The positions of the virtual knobs change with the parameter values.
Press
Page tabs
Parameter names
Parameter values
HINT
If there are 4 or more parameters that can be adjusted, multiple page tabs will be shown.
NOTE
This has no effect on the mic input.
This is not saved with patch memories.
See page 33 for information about the body types that can be selected.
Turn
Turn
NOTE
Set so the LEVEL indicator does not blink red.
Press
Press
and
NOTE
For details about the model types, see page 34.
HINT
Turn
Adjust the balance between original (DRY) and effected (WET) signals.
Turn
NOTE
The effected signal is the sound created by the pickup selection, preamp, effect, boost and equalizer
settings.
Turn
Adjusting Effects
Confirm that the Home Screen is shown.
Adjusting Effects
Press
OFF
ON
Press
Press
or
adjust.
HINT
Effects that are OFF appear gray.
10
EDIT
Adjusting Effects
Press
HINT
See the section starting on page 34 for information about effect types and parameters.
NOTE
A model type can only be selected for Effect 1.
NOTE
An effect requires the same amount of processing power whether it is ON or OFF.
NEXT
11
Adjusting Effects
Adjusting Effects
Turn
for 1 second.
Press
HINT
Press
to cancel.
Effect categories can only be selected for Effects 2 and 3.
To adjust parameters
Turn
and
12
EDIT
Adjusting Effects
Press
Delay effects and some modulation and filter effects can be synchronized to
the tempo. Select an effect that can be synchronized, and set its Time, Rate
or other parameter that can be synchronized to a or note value.
The tempo can be set by tapping the footswitch or a knob.
NOTE
By default, when pressed and held, the footswitch is set to activate the Tuner. To tap the tempo with the
footswitch, the setting must be changed so that it activates Tap Tempo when pressed and held.
(See page 24.)
Tempo settings are saved separately for each patch memory.
for 1 second.
NEXT
13
Adjusting Effects
Tap
tempo.
Adjusting Effects
for 1 second
NOTE
If you press
when
becomes
Turn
Press
and
Press
HINT
You can press
Home Screen.
14
BOOST
You can increase the volume by up to 12 dB, allowing you to adjust the volume used
during solos or when switching from strumming to finger picking.
Press
OFF
ON
NOTE
If the sound becomes distorted when the Boost function is ON, adjust the master level.
The Boost ON/OFF setting is not saved. It is always OFF when the unit starts up.
To adjust parameters
Press
Adjust parameters.
Boost :
Turn
Tone :
Turn
Press
or
15
To eliminate feedback
Press
NOTE
The Anti-feedback ON/OFF setting is not saved. It is always OFF
when the unit starts up.
OFF
Detecting (blinking)
ON
1 frequency
2 frequencies
3 frequencies
NOTE
When the Anti-feedback function is turned off, the detected frequencies are forgotten.
When the unit is detecting the feedback frequency, it will be canceled if you use any other switch or knob.
16
ANTI FEEDBACK
To adjust parameters
.
NOTE
Press
Press
or
17
Press
Turn
Press
Turn
18
to select MEMORY.
MEMORY STORE
Press
Turn
Press
Turn
Press
NOTE
After the settings are saved, the MEMORY screen reopens.
HINT
You can cancel saving patch memory settings and return to the MEMORY screen by pressing
of
instead
19
Press
Turn
Press
Turn
to select MEMORY.
Press
HINT
Press and hold
20
MEMORY
Turn
to select MEMORY.
Press
Press
Press
Each time you press the footswitch, the patch memory will change in the set order.
HINT
In the example on the right, pressing the footswitch cycles through the patch
memories in alphabetical order like this.
[04:RockStyle] [01:FlatPicker]
21
Press
Turn
Press
to select SETTINGS.
HINT
When making settings, press
Press
22
SETTINGS
Press
Turn
Turn
Press
Turn
PHANTOM settings
HINT
PHANTOM : Set the phantom power voltage.
LOW CUT :
NOTE
If you press
to exit the PHANTOM page, the selected setting will become active.
Some condenser mics will not work with the +24V phantom power setting. This uses less power than the
+48V setting, though, so it can help when using batteries.
NEXT
23
Turn
Press
Turn
Turn
Press
Turn
HINT
BYPASS TUNER : Activates the tuner. The effects are bypassed when the tuner is being used.
MUTE TUNER : Activates the tuner. The output is muted when the tuner is being used (default setting).
TAP TEMPO :
24
SETTINGS
Press
Turn
Turn
HINT
ON (default):
OFF:
Changes to presets are not saved until they are
saved manually. (See page 19.)
Turn
Press
Turn
NEXT
25
Turn
Press
CONTRAST :
26
SETTINGS
HINT
When making settings, press
Press
27
for 1 second.
HINT
A setting must be changed to make pressing and holding
activate Tap Tempo. (See page 24.)
Press
Turn
NOTE
The standard pitch for middle A can be set to 435-445 Hz.
The standard pitch is remembered even when the POWER is OFF.
Press
Turn
Chromatic tuner
The chromatic tuner shows the nearest
pitch name (semitone) and how far the
input sound is from that pitch.
28
TUNER
Display
GUITAR
OPEN A
C#
OPEN D
F#
OPEN E
G#
OPEN G
DADGAD
Meaning
Press
Turn
NOTE
You can drop the tuning by one ( 1), two ( 2) or three ( 3) semitones.
Drop tuning is not possible when the TYPE is set to CHROMATIC.
To tune a guitar
Play the open string that you want to tune and tune it.
Chromatic tuner
Flat
Correct pitch
Sharp
Flat
Correct pitch
Sharp
To end tuning
Press
HINT
You can also end tuning by pressing
then
and
29
Press
Turn
Press
to select VERSION.
30
VERSION
HINT
NEXT
31
To complete updating
When the
Restoring the
NOTE
Press
to cancel.
HINT
Executing the All Initialize function will restore all the settings of the
, including its patch memories, to
factory defaults. Do not use this function unless you are certain that you want to do this.
32
Dreadnought
Orchestra
Jumbo Body
Triple 0
Best for jumbo body guitars, such as the
Gibson SJ-200.
Parlor Body
Square Shoulder
Double 0
Best for parlor guitars, such as the Gibson
LG-2.
Mold Body
YMH
Best for resin guitars, such as the Ovation
Adamas.
Single Cutaway
Silent
Resonator
12 Strings
Best for resonator guitars.
Upright Bass
Best for upright basses.
Nylon Strings
Best for classical guitars that use nylon
strings.
NEXT
33
Model Types
D-28
Dreadnought
D-18
Body characteristics
of a Martin D-28,
which is a standard
acoustic guitar style.
000-18
Triple 0
Double 0
OM-28
Dreadnought
Orchestra
00-18
Body characteristics
of a Martin 00-21,
w h i ch fe a t u r e s a
clear tone typical of
jacaranda.
Double 0
OM-18
Orchestra
J-45
Body characteristics
of a Martin 00-18,
w h i ch fe a t u r e s a
balanced tone from a
small body.
Round Shoulder
Hummingbird
Dove
Square Shoulder
Square Shoulder
Jumbo Body
Body characteristics of
a Gibson Hummingbird,
which is loved by pop
and rock artists.
LG-2
Body characteristics
o f a G u i l d F- 5 5 ,
which has deep bass
a n d b e l l - l i ke h i g h
frequencies thanks to
its large body.
LL36
YMH
Body characteristics
of a YAMAHA LL36,
which features a thick
solid sound with a
balanced tone.
Nylon
Nylon Strings
Body characteristics
of a nylon guitar used
in bossa nova, jazz
and other genres.
Parlor Body
Body characteristics of
a Gibson LG-2, which
is a small-bodied
guitar loved by blues
musicians.
LL66
YMH
Body characteristics of
a YAMAHA LL66, which
has a transparent sound
with a good balance of
all the strings.
12Strings
12Strings
Body characteristics
of a Guild 12-string
guitar, which features
the unique wide
sound of doubled
strings.
OM-42
Advanced Jumbo
Round Shoulder
Body characteristics of
a Gibson J-45 Advanced
Jumbo, which uses a
rosewood back to add
rich bass to the J-45
sound.
SJ-200
Body characteristics
of a Gibson Dove,
which features a solid
bass tone from its
maple sides and back.
LG-0
Parlor Body
Body characteristics
of a Gibson LG-0,
which has a downhome sound thanks
to its ladder bracing.
Adamas
Mold Body
Body characteristics
of an Ovation Adamas,
which was created to
have ideal vibration
traits by using a unique
top material.
Resonator
Resonator
Body characteristics
of a Dobro resonator
guitar, which has a
spider cone resonator
in a wood body.
Orchestra
Body characteristics
of a Martin OM-42,
which features rich
harmonics and a tight
low end.
Body characteristics
of a Gibson J-45,
which features a dry
tone that is perfect
for strumming.
J-160E
Triple 0
Body characteristics
of a Martin 00028, which features
beautiful treble.
Body characteristics
of a Martin OM-18,
which features a tone
with a fast response.
Round Shoulder
F-55
000-28
Body characteristics
of a Martin D-45,
which features rich
harmonics and deep
bass.
Body characteristics
of a Martin OM-28,
which features full
high frequencies and
just the right amount
of volume.
Body characteristics
of a Gibson J-160E,
which is famous as a
pioneering acousticelectric guitar.
34
D-45
Body characteristics
o f a M a r t i n D - 18 ,
which features a clear
tone.
Body characteristics
of a Martin 000-18,
which features clear
bass.
00-21
Dreadnought
Jumbo Body
Body characteristics
of a Gibson SJ-200,
which is known as
the king of flattop
guitars.
314ce
Single Cutaway
Body characteristics of
a Taylor 314ce, which
is popular because of
its great playability and
balanced tone.
Legend
Mold Body
Body characteristics
of an Ovation Legend,
which features a round
back and a large sound
hole.
UprightBass
Upright Bass
Body characteristics
of a 3/4 upright bass,
which has soft highs
and rich lows.
Parameter
Parameter range
Effect type
Page02
Effect screen
Depth
0100
Knob2
Rate
050
Knob3
Reso
-1010
PreD
Mix
Level
050
0100
0150
Parameter explanation
Flanger
Effect explanation
[DYN/FLTR]
Comp
Sense
Page02
RackComp
010
Knob2
Tone
0150
Slow, Fast
Knob1
THRSH
Page02
050
Knob2
Ratio
110
Knob3
Level
0150
110
Page02
OptComp
Knob3
Level
Page01
M Comp
010
050
Knob2
Ratio
110
Knob3
Level
0150
110
Drive
010
Knob2
Tone
0100
Knob3
Level
0150
Page02
SlowATTCK
This effect slows the attack of each note, resulting in a violin-like performance.
Knob1
Time
Page01
150
Knob2
Curve
010
Knob3
Level
0150
Page02
NEXT
35
ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the tone.
Knob1
Page01
THRSH
125
Knob2
DETCT
GtrIn, EfxIn
Knob3
Level
0150
Page02
GraphicEQ
Page03
ParaEQ
Knob2
400Hz
-1212
-1212
-1212
6.4kHz
-1212
12kHz
-1212
Boosts or cuts the high (3.2 kHz) Boosts or cuts the extremely high Boosts or cuts the harmonics (12
frequency band.
(6.4 kHz) frequency band.
kHz) frequency band.
Level
0150
Exciter
Knob3
800Hz
Boosts or cuts the low (160 Hz) frequency Boosts or cuts the low-middle (400 Boosts or cuts the middle (800 Hz)
band.
Hz) frequency band.
frequency band.
3.2kHz
Page02
-1212
Freq1
20Hz20kHz
Knob2
Q1
0.5, 1, 2, 4, 8, 16
Adjusts EQ1 Q.
Freq2
Q2
20Hz20kHz
0.5, 1, 2, 4, 8, 16
Adjusts EQ2 Q.
Knob3
Gain1
-1212
-1212
0150
0100
Knob2
Trebl
0100
Knob3
Level
0150
Adjusts the amount of low-frequency Adjusts the amount of high-frequency Adjusts the level of the signal after it
phase correction.
has passed through the module.
phase correction.
Page02
AutoWah
Knob2
Reso
010
Knob3
Level
0150
Page02
[MOD]
Tremolo
Page02
Depth
0100
Knob2
Rate
050
Knob3
Level
0150
UP 0UP 9,
DWN 0DWN 9,
TRI 0TRI 9
Phaser
Rate
150
36
Knob2
Color
4 STG, 8 STG,
inv 4, inv 8
Knob3
Level
0150
Chorus
This effect mixes a shifted pitch with the original sound to add movement and thickness.
Knob1
Depth
Page01
Detune
Knob2
Rate
Tone
Level
010
Page01
Page02
-2525
050
Knob3
Mix
0100
Tone
010
Level
0150
This chorus effect combines 2 bands of detuning and chorus for precise control.
Page01
Page03
0100
Knob2
HiMix
0100
Knob3
ChMix
0100
Adjusts the amount of low-frequency Adjusts the amount of high-frequency Adjusts the amount of chorus in the
detuning in the mix.
mix.
detuning in the mix.
LoPit
Page02
-2525
HiPit
-2525
PreD
050
A d j u s t s t h e a m o u n t o f p i t ch A d j u s t s t h e a m o u n t o f p i t ch
modulation for the low-frequency modulation for the high-frequency Sets pre-delay time of effect sound.
detuning.
detuning.
Rate
0100
Depth
0100
Tone
010
Page02
0100
Knob2
Rate
0100
Knob3
Mix
0100
PreD
Tone
Level
120
010
0150
Page02
0100
Knob2
Rate
150
Tone
Level
010
Knob3
Mix
0100
0150
Page02
PitchSHFT
0150
Knob2
PreD
Knob1
Flanger
Adjusts the detuning in cents, which Sets the pre-delay time of the effect Adjusts the amount of effected sound
are fine increments of 1/100-semitone. sound.
that is mixed with the original sound.
LoMix
StereoCho
0100
Knob1
MirageCho
Knob3
Mix
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
type has a chorus effect without much sense of modulation.
Cent
SilkyCho
150
Page02
0100
Depth
0100
Knob2
Rate
050
Knob3
Reso
-1010
PreD
Mix
Level
050
0100
0150
Knob2
Tone
010
Page02
-1212 , 24
-2525
Level
Knob3
Bal
0100
0150
NEXT
37
[DELAY]
Delay
Page02
ModDelay
Knob2
F.B
HiDMP
P-P
Level
010
Page02
0150
OFF/ON
12000
Knob2
F.B
0100
Knob3
Mix
0100
Rate
Level
Tail
150
0150
OFF/ON
This reverse delay is a long delay with a maximum length of 2000 ms.
Knob1
Time
Page01
Page02
102000
Knob2
F.B
0100
Knob3
Bal
0100
HiDMP
Level
Tail
010
0150
OFF/ON
This effect produces several delay sounds with different delay times.
Knob1
Time
Page01
Page02
13000
Knob2
PTTRN
18
Knob3
Mix
0100
Sets the tap pattern, which varies from Adjusts the amount of effected sound
rhythmical to random patterns.
that is mixed with the original sound.
Tone
Level
010
0150
Tail
OFF/ON
This stereo delay allows the left and right delay times to be set separately.
Knob1
TimeL
Page01
Page02
Page03
12000
Knob2
TimeR
12000
Knob3
Mix
0100
Adjusts delay time of left channel Adjusts delay time of right channel Adjusts the amount of effected sound
delay.
delay.
that is mixed with the original sound.
LchFB
0100
RchFB
0100
Level
0150
Adjusts delay feedback of left channel. Adjusts delay feedback of right channel. Adjusts the output level.
LchLv
38
MONO, P-P
Adjusts the treble attenuation of the Sets delay output to mono or pingAdjusts the output level.
delay sound.
pong.
Page01
StereoDly
0100
Knob1
MultiTapD
Knob3
Mix
Time
ReverseDL
0100
Tail
Page03
14000
0100
RchLv
0100
Tail
OFF/ON
StompDly
By turning the feedback up on this stomp-style delay, you can make it self-oscillate.
Knob1
E.LVL
Page01
0100
x8
Mode
MONO, STR
Knob3
Time
1600
OFF/ON
010
[REVERB]
HD Reverb
Page02
Hall
Knob2
Tone
0100
1200
HPF
010
0150
Page02
130
Knob2
Tone
010
Knob3
Mix
0100
PreD
Tail
1100
Level
0150
OFF/ON
Page02
TiledRoom
Knob3
Mix
Decay
Room
010
PreD
Tail
Page03
0100
OFF,
Page03
Knob2
F.B
Page02
0120
130
Knob2
Tone
010
Knob3
Mix
0100
PreD
Tail
1100
Level
0150
OFF/ON
Page02
130
Knob2
Tone
010
Knob3
Mix
0100
PreD
Tail
1100
Level
0150
OFF/ON
NEXT
39
Page02
Arena
130
Knob2
Tone
PreD
Tail
1100
Level
OFF/ON
Page02
130
Knob2
Tone
010
Knob3
Mix
0100
PreD
Tail
1100
Level
0150
OFF/ON
Page02
130
Knob2
Shape
-1010
Knob3
Mix
0100
Tone
Level
Tail
010
0150
OFF/ON
Page02
1100
Knob2
Tone
010
Knob3
Mix
0100
Ref
Level
Tail
010
0150
OFF/ON
Page02
Page03
40
0150
This reverb effect simulates the acoustics of a large enclosure such as a sports arena.
Page01
ModReverb
0100
Knob1
Air
Knob3
Mix
Decay
EarlyRef
010
0100
Knob2
Decay
130
Knob3
Mix
0100
Rate
Tone
PreD
150
010
Level
Tail
0150
OFF/ON
1100
SlapBack
Page03
HD Hall
Knob2
Decay
Knob3
Mix
0100
F.B
Tone
DRBal
0100
010
Level
Tail
0150
0100
OFF/ON
1200
Knob2
Decay
0100
Knob3
Mix
0100
Page02
Plate
130
0100
HiDMP
0100
Tail
OFF/ON
Page02
01000
0100
Knob3
Mix
0100
0100
LoDMP
0100
HiDMP
0100
Adjusts the reverb time of the low Adjusts low frequency damping in Adjusts high frequency damping in
frequencies.
reverb sound.
reverb sound.
Tail
Page03
Knob2
Decay
Page02
1200
OFF/ON
Level
0150
[MIC]
Dyna 57
Dist.
On, Off
Knob2
Posi.
Hole, Brdg
Knob3
Level
0150
Page02
Cond 414
Dist.
On, Off
Knob2
Posi.
Hole, Brdg
Knob3
Level
0150
Page02
Cond 87
Dist.
On, Off
Knob2
Posi.
Hole, Brdg
Knob3
Level
0150
Page02
41
Troubleshooting
The unit will not turn ON
Confirm that the POWER switch is set
Troubleshooting
exc e e d e d , T H R U a p p e ar s o n the
USB cable.
bypassed (P11).
42
Specifications
MIC IN
Output
L/MONO/PHONES
BALANCED OUT
40 + 28 guitar models
3
20
44.1kHz
24-bit with 128x oversampling
24-bit with 128x oversampling
32-bit floating point & 32-bit fixed point
40Hz - 20kHz (+1dB/-3dB) (10k load)
LCD
Standard monaural phone jack
Rated input level
-20dBm
Input impedance
1M
XLR/standard phone combo jacks
Rated input level
-20dBm
Input impedance
1M
Standard monaural phone jack
Maximum output level:
Line: +5dBm (with output load impedance of 10k or more)
Standard stereo phone jack (line/headphones)
Maximum output level:
Line: +5dBm (with output load impedance of 10k or more)
Headphones: 20mW + 20mW (into 32 load)
XLR connector
Output impedance
100 (HOT-GND, COLD-GND), 200 (HOT-COLD)
GND LIFT (switch selectable)
120dB
-100dBm
AC adapter
DC9V (center minus plug) 500mA (ZOOM AD-16)
Batteries
8 hours of continuous operation using 4 AA alkaline batteries
160.3mm(D) x 108mm(W) x 54.9mm(H)
Firmware update
630g (Not including batteries)
Specifications
Effect types
Number of simultaneous effects
Number of user patches
Sampling frequency
A/D conversion
D/A conversion
Signal processing
Frequency characteristics
Display
Input
PICKUP IN
0dBm = 0.775Vrms
43
For EU Countries
Declaration of Conformity:
This product complies with the requirements of
EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC and
ErP Directive 2009/125/EC and
RoHS Directive 2011/65/EU
Disposal of Old Electrical & Electronic Equipment
(Applicable in European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this
product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
ZOOM CORPORATION
4-4-3 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
http://www.zoom.co.jp
Z2I-1597-01
Quick Guide
LIFT
: Disconnect the grounding pin from the signal path.
CONNECT : Connect the grounding pin to the ground.
Equalizer knobs
BASS
: Adjust to boost or cut low frequencies.
MIDDLE : Adjust to boost or cut middle frequencies.
TREBLE : Adjust to boost or cut high frequencies.
Balance knob
Use to set the best input characteristics for the type of pickup used.
PIEZO
: Setting for acoustic guitars with piezo pickups.
MAGNETIC : Setting for acoustic guitars with magnetic pickups.
FLAT
: No adjustment for the pickup type.
Press
Anti-Feedback
Function
Press
Boost Function
Press
Press
Press
Press
Effects
Press
Press
Turn ON/OFF
Press
or
Turn
,
Press
Press
2013 ZOOM CORPORATION Copying or reproduction of this document in whole or in part without permission is prohibited.
Guitar tuning
Z2I-1606-01