Professional Documents
Culture Documents
70
70-Q0802/D
70-C0019/B
digital version
with
DIGIMAX Plus
70-Q0802/D
70-C0019
UPGRADE
your CONTROLS 70-C0019 or similar testing machines
with the new digital data acquisition and
graphic processing system
MAIN FEATURES
2 channels: 1 load (connected to pressure transducer), 1 displacement
(connectable to linear potentiometric transducer).
High resolution: 130.000 points.
Large graphic display: 240 x 128 pixels.
Language selection: English, French and Italian.
Available units: kN, t, lbf, mm, in.
Large permanent memory: up to 100 test report.
Downloading data to PC at 38400 baud.
2 RS 232 serial ports for PC and printer connection.
One RS 232 cable included for PC connection.
Calibration via software.
User friendly software.
Code
82-P0354
45-R0023
82-Q0800/1
70-Q0802/D
70-C0019
Description
700 bar pressure transducer
Mechanical connection for pressure transducer
Support for lateral fitting
Digimax Plus for tension/compression tests
UPGRADE
your Controls 70-C0019 or similar testing machines
with the new digital data acquisition and
graphic processing system
DIGIMAX Plus 70Q0802/D
Test selection.
HARDWARE
The main characteristic are:
Multy-layer main board with SMD technology
chip clock/calendar;
large permanent memory to store input data and test results;
two RS 232 serial ports for connecting PC and printer;
two analogical channels (1 for strain gauge pressure transducer
or load cell and 1 for linear potentiometric transducer);
graphic display with resolution 240 x 128 pixel;
dimension 250 x 220 x 150 mm;
approx net weight: 2 kg.
INTERNAL SOFTWARE (FIRMWARE)
The test is menu driven by the large 240 x 128 pixel display and by a
10 buttons membrane keyboards, 4 of which are interactive with the
specific icon of each menu.
The main features, which are however shown in the examples of
the these pages, are the following:
language selection: English, French, Spanish and Italian;
unit selection: kN, t, lbf, mm, in;
for TENSILE TEST:
- simultaneos display of load, stress and, only using an
extensometer, elongation measurements;
- graph option of test data showing simultaneously load/
elongation courve (only using an extensometer);
- elaboration of results after test completion: ReH, ReL or Rp as
alternative use adjustable, final elongation (if possible),
adjustable plot scale;
for COMPRESSION TEST
- simultaneous display of load and stress measurements;
up to 100 tests stored permanently including individual test
settings and results;
machine calibration via software by keyboards;
easy management of stored data;
Description
Serial printer 230 V, 50 Hz, 1 Ph.
Serial printer 110 V, 60 Hz, 1 Ph.
Serial printer battery operated (standard or rechargeable)
RS 232 C connection cable
Support for connection to Digimax Plus
to execute analysis of the diagram and calculate the parameters of the test
according to EN 10002*;
to save (also in ASCII format) and print reports, graphics and tables of single or
batch test
* Only for tension test
Ordering information
Code
Description
70-S0010
PC software for data processing suitable for Digimax Plus 70-Q0802/D
CONTROLS S.r.L.
Via Aosta 6
I-20063 Cernusco s/N. (MI) - ITALY
Tel. +39-02921841
Facsimile +39-0292103333
E-mail: controls@controls.it
www.controls.it
In line with its continual program of product research and development, Controls
reserves the right to alter specifications to equipment to any time. 03/02/E/0041.