You are on page 1of 203

WCDMA RAN

RAN16.0

AMR Feature Parameter


Description
Issue

01

Date

2014-04-30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.


No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address:

Huawei Industrial Base


Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

support@huawei.com

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

Contents

Contents
1 About This Document .................................................................................................................. 1
1.1 Scope ............................................................................................................................................................................ 1
1.2 Intended Audience ........................................................................................................................................................ 1
1.3 Change History ............................................................................................................................................................. 1
1.4 Differences Between Base Station Types ...................................................................................................................... 3

2 Overview......................................................................................................................................... 4
2.1 Background ................................................................................................................................................................... 4
2.2 Introduction .................................................................................................................................................................. 5
2.3 Benefits ......................................................................................................................................................................... 5

3 Basic Principle ............................................................................................................................... 6


3.1 AMR Radio Bearer Scheme .......................................................................................................................................... 6
3.2 AMR Rate Set ............................................................................................................................................................... 7
3.3 AMR Rate Control ...................................................................................................................................................... 10

4 Technical Description of AMR-WB Services ........................................................................ 14


5 Technical Description of TFO/TrFO ....................................................................................... 16
6 Technical Description of AMR/WB-AMR Speech Rates Control ..................................... 18
6.1 Overview .................................................................................................................................................................... 18
6.2 AMRC Based on LDR ................................................................................................................................................ 19
6.3 AMRC Based on Link Stability .................................................................................................................................. 19
6.3.1 AMRC Performance ................................................................................................................................................ 19
6.3.2 Link Stability Measurement ..................................................................................................................................... 21
6.4 AMRC Based on TFO/TrFO ....................................................................................................................................... 24

7 Speech Quality Assessment and Maintenance ..................................................................... 26


8 Related Features .......................................................................................................................... 28
8.1 WRFD-010613 AMR-WB .......................................................................................................................................... 28
8.2 WRFD-011600 TFO/TrFO ......................................................................................................................................... 28
8.3 WRFD-020701 AMR/WB-AMR Speech Rates Control ............................................................................................ 29

9 Network Impact ........................................................................................................................... 30


9.1 WRFD-010613 AMR-WB .......................................................................................................................................... 30
9.2 WRFD-011600 TFO/TrFO ......................................................................................................................................... 31
Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

ii

WCDMA RAN
AMR Feature Parameter Description

Contents

9.3 WRFD-020701 AMR/WB-AMR Speech Rates Control ............................................................................................ 31

10 Engineering Guidelines ........................................................................................................... 34


10.1 WRFD-010613 AMR-WB (Adaptive Multi Rate Wide Band) ................................................................................. 34
10.1.1 When to Use This Feature ...................................................................................................................................... 34
10.1.2 Information to Be Collected .................................................................................................................................. 34
10.1.3 Network Planning .................................................................................................................................................. 34
10.1.4 Feature Deployment ............................................................................................................................................... 34
10.1.5 Performance Monitoring ........................................................................................................................................ 41
10.1.6 Parameter Optimization ......................................................................................................................................... 42
10.1.7 Troubleshooting ..................................................................................................................................................... 43
10.2 WRFD-011600 TFO/TrFO ....................................................................................................................................... 43
10.2.1 When to Use This Feature ...................................................................................................................................... 43
10.2.2 Information to Be Collected .................................................................................................................................. 43
10.2.3 Network Planning .................................................................................................................................................. 43
10.2.4 Feature Deployment ............................................................................................................................................... 43
10.2.5 Performance Monitoring ........................................................................................................................................ 46
10.2.6 Parameter Optimization ......................................................................................................................................... 46
10.2.7 Troubleshooting ..................................................................................................................................................... 46
10.3 WRFD-020701 AMR/WB-AMR Speech Rates Control .......................................................................................... 46
10.3.1 When to Use This Feature ...................................................................................................................................... 46
10.3.2 Information to Be Collected .................................................................................................................................. 47
10.3.3 Network Planning .................................................................................................................................................. 47
10.3.4 Feature Deployment ............................................................................................................................................... 47
10.3.5 Performance Monitoring ........................................................................................................................................ 60
10.3.6 Parameter Optimization ......................................................................................................................................... 62
10.3.7 Troubleshooting ..................................................................................................................................................... 63

11 Parameters .................................................................................................................................. 64
12 Counters .................................................................................................................................... 156
13 Glossary .................................................................................................................................... 198
14 Reference Documents............................................................................................................. 199

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

iii

WCDMA RAN
AMR Feature Parameter Description

1 About This Document

About This Document

1.1 Scope
This document describes AMR, including its technical principles, network impact, and
engineering guidelines. This document covers the following features:

WRFD-010613 AMR-WB (Adaptive Multi Rate Wide Band)

WRFD-011600 TFO/TrFO

WRFD-020701 AMR/WB-AMR Speech Rates Control

1.2 Intended Audience


This document is intended for personnel who:

Need to understand the features described herein

Work with Huawei products

1.3 Change History


This section provides information about the changes in different document versions. There are
two types of changes, which are defined as follows:

Feature change
Changes in features of a specific product version

Editorial change
Changes in wording or addition of information that was not described in the earlier
version

RAN16.0 01 (2014-04-30)
This issue includes the following changes.
Change Type

Issue 01 (2014-04-30)

Change Description

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Parameter Change

WCDMA RAN
AMR Feature Parameter Description

1 About This Document

Change Type

Change Description

Parameter Change

Feature change

Added the speech quality


assessment function and the
speech quality maintenance
function. For details, see
chapter 7 Speech Quality
Assessment and
Maintenance.

None

Editorial change

Optimized the document


structure and description.

None

RAN16.0 Draft A (2014-01-20)


Compared with Issue 04 (2013-12-30) of RAN15.0, Draft A (2014-01-20) of RAN16.0
includes the following changes.
Change
Type

Change Description

Parameter
Change

Feature
change

Added the application of the following functions for


combined services: AMRC based on LDR and uplink
AMRC based on link stability. For details, see section
AMRC Based on LDR and section AMRC Based on
Link Stability.

Added the
following
switches under
the
CsSwitch(BSC6
900,BSC6910)
parameter:
CS_COMB_NA
MRC_SWITC
H
CS_COMB_W
AMRC_SWITC
H

Added the descriptions of the function of AMR-WB


SF reconfiguration based on LDR triggered by code
congestion. For details, see section AMRC Based on
LDR and section Feature Deployment.

Added the
following switch
under the
CsSwitch(BSC6
900,BSC6910)
parameter:
CS_WAMR_SF
_RECONF_SW
ITCH

Added the descriptions of the


CS_AMR_TRFO_CMP_SWITCH. For details, see
section Description and section Feature Deployment.

Added the
following switch
under the
CsSwitch(BSC6
900,BSC6910)
parameter:
CS_AMR_TRF

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

Change
Type

1 About This Document

Change Description

Parameter
Change
O_CMP_SWIT
CH

Added the AMRC Rate Readjustment function. For


details about this function, see section AMRC
Signaling and section Feature Deployment.

Added the
following switch
under the
ProcessSwitch(B
SC6900,BSC691
0) parameter:
IUUP_RC_REP
EAT_SWITCH

Editorial
change

Added the descriptions of optimization for


AMRC-related parameters. For details, see section
Parameter Optimization.

Added the
following switch
under the
CsSwitch(BSC6
900,BSC6910)
parameter:
CS_LDR_AMR
_RATEUP_OP
T_SWITCH

1.4 Differences Between Base Station Types


This document applies to the following types of base stations.
Base Station

Model

Macro

3900 series base stations

DBS3800

BTS3812E

BTS3812AE

BTS3803E

BTS3902E

Micro

LampSite

DBS3900

The features described in this document are implemented in the same way on macro, micro,
and LampSite base stations.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

2 Overview

Overview

2.1 Background
UMTS voice services consist of the AMR service (CS voice) and the VoIP service (PS voice).
The traditional voice bearer scheme is voice over DCH. With the development of technologies
and the enhancement of bearer efficiency, HSPA/HSPA+ is being increasingly used for voice
bearer.
Table below describes the development process of UMTS voice bearer technologies.
Table 2-1 Development process of UMTS voice bearer technologies
Protocol

Release

CS

Voice

PS

Voice

3GPP Release 99

AMR-NB over DCH

3GPP Release 4

TFO, TrFO, and soft switch

3GPP Release 5

AMR-WB over DCH

VoIP over DCH


(IMS-based)

3GPP Release 6

VoIP over HSPA

3GPP Release 7

VoIP over HSPA+ (CPC)

3GPP Release 8

AMR over HSPA/HSPA+

Table below compares different voice bearer technologies.


Table 2-2 Comparison between voice bearer technologies
Item

AMR
DCH

Radio bearer

AMR
over
HSPA/HSPA
+

VoIP
over
HSPA/HSPA
+

VoIP
DCH

R99 DCH

HSPA/HSPA+

HSPA/HSPA+

DCH

RNC rate
control

AMRC

AMRC

None

None

RLC

TM

UM

UM

UM

Issue 01 (2014-04-30)

over

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

over

WCDMA RAN
AMR Feature Parameter Description

2 Overview

Item

AMR
DCH

CN
Terminal

over

AMR
over
HSPA/HSPA
+

VoIP
over
HSPA/HSPA
+

VoIP
DCH

over

CS

CS

PS+IMS

PS+IMS

Ordinary
terminal

Supports
HSPA/HSP
A+.

Supports
HSPA/HSP
A+.

Supports the
VoIP client.

Supports
AMR over
HSPA/HSP
A+.

Supports the
VoIP client.

This document focuses on CS voice services and the voice bearer technology of AMR over
DCH. CS voice services and voice services that use AMR over DCH are referred to as AMR
services in this document. For details about other voice services, see Voice over HSPA Feature
Parameter Description.

2.2 Introduction
AMR services are 3G adaptive multi-rate speech services and can be classified into AMR-NB
services and AMR-WB services. By default, AMR services refer to AMR-NB services with a
maximum rate of 12.2 kbit/s. The maximum rate of AMR-WB services is 23.85 kbit/s. To
ensure the quality of AMR services, the Tandem Free Operation/Transcoder Free Operation
(TFO/TrFO) and AMR Rate Control (AMRC) functions are provided.

2.3 Benefits
AMR-WB services provide improved voice quality, especially in terms of voice naturalness.
For details, see chapter 4 Technical Description of AMR-WB Services.
TFO/TrFO helps avoid voice quality deterioration caused by coding and decoding. In addition,
TrFO helps save transmission resources. For details, see chapter 5 Technical Description of
TFO/TrFO.
AMR/WB-AMR Speech Rates Control enables the RNC to dynamically adjust the speech
rates based on radio resource congestion state and radio link state. This improves the voice
quality of AMR services in high-traffic and weak-coverage scenarios. For details, see chapter
6 Technical Description of AMR/WB-AMR Speech Rates Control.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

Basic Principle

3.1 AMR Radio Bearer Scheme


The CN sends the requests of setting up AMR services with the maximum rate of 12.2 kbit/s
and AMR services with the maximum rate of 23.85 kbit/s to the RNC using RAB 0# and RAB
1#, respectively, as described in the following table.
RAB
Index

CN
Domain

Traffic
Class

Source
Statistics
Descriptor

Maximum
Bit Rate
(MBR)
(kbit/s)

Direction

CS

Conversatio
nal

Speech

12.2

Downlink/U
plink

CS

Conversatio
nal

Speech

23.85

Downlink/U
plink

Each RAB consists of three sub-flows: A, B, and C, as shown in the following figure. A has a
higher priority than B and C. The CN transmits these sub-flows to the RNC. Upon receiving
these sub-flows, the RNC sets up three RBs and transmits these RBs at the RLC layer in TM
mode.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

3.2 AMR Rate Set


The rates of AMR services can be adjusted based on the change of radio environments to
achieve better voice quality. AMR-NB services and AMR-WB services have different rates
and rate sets.
AMR rate = (A + B + C)/20 ms, where A, B, and C stand for the size of voice data for each sub-flow.
Voice has a period close to 20 ms so the voice is sampled and processed every 20 ms. The following is
an example:12.2 kbit/s = (81+103+60) bits/20 ms.

AMR-NB Rate Set


The following table lists the rates of AMR-NB services and the bit number of each sub-flow
corresponding to each rate.
Table 3-1 Rates of AMR-NB services
Rate
(kbit/s
)

12.2

10.2

7.95

7.4

6.7

5.9

5.15

4.75

SID

No
Data
(0)

Sub-flo
wA
(bit)

81

65

75

61

58

55

49

42

39

Sub-flo
wB
(bit)

103

99

84

87

76

63

54

53

Sub-flo
wC
(bit)

60

40

3GPP TS 28.062 provides 16 recommended configurations of the AMR-NB rate set on the
wireless network. The recommended configurations are configurations 0 to 15 listed in Table
below.
Recommended configuration 1 or 7 is usually used on live networks to achieve optimal
performance and communication.
Table 3-2 Recommended configurations of the AMR-NB rate set
Set
tin
g

10

11

12

13

14

15

12.
2
kbit
/s

(1)

10.
2
kbit

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

Set
tin
g

3 Basic Principle

10

11

12

13

14

15

7.9
5
kbit
/s

7.4
0
kbit
/s

6.7
0
kbit
/s

5.9
0
kbit
/s

5.1
5
kbit
/s

4.7
5
kbit
/s

OM

/s

1 indicates that a rate set contains the rate. (1) indicates that the rate is optional in a rate set. - indicates
that a rate set does not contain the rate. Take the number 1 recommended configuration as an example,
the rate set can be {12.2 kbit/s, 7.4 kbit/s, 5.9 kbit/s, 4.75 kbit/s} or {7.4 kbit/s, 5.9 kbit/s, 4.75 kbit/s}.
A indicates that the TFO/TrFO mechanism is allowed to automatically optimize and modify the rate set
during TFO/TrFO negotiation. F indicates that the optimization and modification are not allowed.
Usually, F is used.

AMR-WB Rate Set


The following table lists the rates of AMR-WB services and the bit number of each sub-flow
corresponding to each rate.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

Table 3-3 Rates of AMR-WB services


Rate
(kbit/
s)

23.85

23.05

19.85

18.25

15.85

14.25

12.65

8.85

6.6

SID

No
Data
(0)

Sub-fl
ow A
(bit)

72

72

72

72

72

72

72

64

54

40

Sub-fl
ow B
(bit)

405

389

325

293

245

213

181

113

78

Sub-fl
ow C
(bit)

3GPP TS 26.103 provides six recommended configurations of the AMR-WB rate set. The
recommended configurations are configurations 0 to 5 listed in Table below.
Recommended configuration 0 or 4 is usually used on live networks to achieve optimal
performance and communication.
Table 3-4 Recommended configurations of the AMR-WB rate set
Set
tin
g

10

11

12

13

14

15

23.
85
kbit
/s

15.
85
kbit
/s

12.
65
kbit
/s

8.8
5
kbit
/s

6.6
kbit
/s

OM

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

1 indicates that a rate set contains the rate. - indicates that a rate set does not contain the rate. Take the
number 1 recommended configuration as an example, the rate set can be {6.6 kbit/s, 8.85 kbit/s, 12.65
kbit/s}.
A indicates that the TFO/TrFO mechanism is allowed to automatically optimize and modify the rate set
during TFO/TrFO negotiation. F indicates that the optimization and modification are not allowed.
Usually, F is used.

3.3 AMR Rate Control


Definition
The AMR Rate Control (AMRC) function enables the RNC or UE to dynamically choose a
rate from controllable rate set during the AMR calls based on the changes in the radio
environment.
The AMRC function can adjust the rate in gradual or non-gradual mode. For example, in
gradual mode, when the controllable rate set is {12.2 bit/s, 7.4 bit/s, 5.9 bit/s, 4.75 bit/s} and
the rate needs to be decreased from 12.2 bit/s to 4.75 bit/s, the rate is first decreased to 7.4
bit/s, then to 5.9 bit/s, and finally to 4.75 bit/s. While in non-gradual mode, the rate can be
directly decreased to 4.75 bit/s.

Run the RNC MML command SET UCORRMALGOSWITCH and select the
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_SWITCH check box under the
CsSwitch(BSC6900,BSC6910) parameter. This enables the RNC to adjust the rates of
AMR-WB services in gradual mode.

Run the RNC MML command SET UCORRMPARA and select the
PERFENH_NB_AMRC_UL_RATESET_EXT_SWITCH check box under the
PerfEnhanceSwitch(BSC6900,BSC6910)3 parameter. This enables the RNC to adjust
the rates of AMR-NB services in gradual mode.

Signaling Procedure
AMRC can be divided into uplink AMRC rate adjustment and downlink AMRC rate
adjustment based on the direction of data flow. The following figures show the signaling
procedures for uplink and downlink AMRC rate adjustments.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

10

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

Figure 3-1 Signaling procedure for uplink AMRC rate adjustment

The rate adjustment succeeds if the RNC does not receive a TFC CONTROL FAILURE from the UE
within the period of time specified by the AmrUlRateAdjTimerLen(BSC6900,BSC6910)/
WAmrUlRateAdjTimerLen(BSC6900,BSC6910) parameter after sending a TFC CONTROL message.

Figure 3-2 Signaling procedure for downlink AMRC rate adjustment

The rate adjustment fails if the RNC receives a RATE CONTRAL NACK message from the CN or does
not receive any message within the period of time specified by the
DlModeChangeTimerLen(BSC6900,BSC6910)
/DlModeChangeTimerLen(BSC6900,BSC6910)parameter after sending a TFC CONTROL message.

Controllable Rate Set


In the AMR rate set, the minimum rate is the guaranteed bit rate (GBR) and the maximum rate
is max bit rate (MBR). The MBR carried in the RAB assignment message sent by the CN is
MBRRAB, and the MBR specified on the RNC LMT is MBRLMT.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

11

WCDMA RAN
AMR Feature Parameter Description

3 Basic Principle

The AMRC controllable rate set is the collection of rates that can be selected during the rate
adjustment. This collection includes all or part of rates in a rate set described in the following
figure.

The AMRC controllable rate set is specified as follows:


1.

The CN sends the RNC a RAB assignment message that carries a specified AMR rate set,
the GBR, and the MBRRAB.

2.

The LMT sends the MBRLMT to the RNC.

3.

The RNC calculates the AMRC controllable rate set, GBR, and MBR based on the
controllable rate selection algorithm in the following table. The AMRC controllable rate
set can be used for the rate adjustment during the AMR call.

Table 3-5 AMRC controllable rate selection algorithm


Service
Type

Iu
UP
Ver
sio
n

Link
Directi
on

AMRC Controllable

AMR-N
B

Downlin
k

{GBR, MBR}

Uplink

{GBR, MBR}

Rate Set

Two rates are included in this set and MBR = min {MBRRAB, MBRLMT}.

Two rates are included in this set and MBR = min {MBRRAB, MBRLMT}.
2

Downlin
k

{GBR, ..., MBRRAB}

Uplink

If the AMRC function adjusts the rate in gradual mode, the {GBR, ..., MBRRAB}
rate set that includes all the rates carried in the RAB assignment message is used.

Issue 01 (2014-04-30)

This set includes all the rates carried in the RAB assignment message.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

12

WCDMA RAN
AMR Feature Parameter Description

Service
Type

Iu
UP
Ver
sio
n

Link
Directi
on

AMRC Controllable

3 Basic Principle

Rate Set

If the number of rates in this set is greater than 4, rates other than 4.75 kbit/s, 5.9
kbit/s, 7.4 kbit/s, and 12.2 kbit/s are excluded from this set.
If the AMRC function adjusts the rate in non-gradual mode, the {GBR, MBRRAB}
rate set that includes only two rates is used.
AMRWB

Downlin
k

{GBR, MBR}

Uplink

If the AMRC function adjusts the rate in gradual mode, the {GBR, ..., MBRRAB}
rate set that includes all the rates carried in the RAB assignment message is used.
If the number of rates in this set is greater than 4, rates other than 6.60 kbit/s, 8.85
kbit/s, 12.65 kbit/s, 15.85 kbit/s, and 23.85 kbit/s are excluded from this set.

Two rates are included in this set and MBR = min {MBRRAB, MBRLMT}.

If the AMRC function adjusts the rate in non-gradual mode, the {GBR, MBRRAB}
rate set that includes only two rates is used.
2

Downlin
k

{GBR, ..., MBRRAB}

Uplink

If the AMRC function adjusts the rate in gradual mode, the {GBR, ..., MBRRAB}
rate set that includes all the rates carried in the RAB assignment message is used.
If the number of rates in this set is greater than 4, rates other than 6.60 kbit/s, 8.85
kbit/s, 12.65 kbit/s, 15.85 kbit/s, and 23.85 kbit/s are excluded from this set.

This set includes all the rates carried in the RAB assignment message.

If the AMRC function adjusts the rate in non-gradual mode, the {GBR, MBRRAB}
rate set that includes only two rates is used.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

13

WCDMA RAN
AMR Feature Parameter Description

4 Technical Description of AMR-WB Services

Technical Description of AMR-WB


Services

This chapter describes the WRFD-010613 AMR-WB feature.

Introduction
The following figure shows different technologies used for AMR-WB services and AMR-NB
services.
Figure 4-1 Different technologies used for AMR-WB services and AMR-NB services

Benefits
Compared with AMR-NB services of similar rates, AMR-WB services provide better voice
quality.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

14

WCDMA RAN
AMR Feature Parameter Description

4 Technical Description of AMR-WB Services

Figure 4-2 AMR-NB/WB MOS evaluated based on ITU-T P.863 (BLER=0%)

ITU-T P.862.1 and ITU-T P.863 are two mainstream standards for evaluating the mean opinion score
(MOS). ITU-T P.862.1 can evaluate only the quality of AMR-NB voice services within the 4 kHz
bandwidth. ITU-T P.863 was introduced in 2011 and can evaluate the quality of AMR-NB and
AMR-WB services within the 8 kHz bandwidth. ITU-T P.863 increases the evaluation requirement, and
therefore the AMR-NB MOS evaluated based on ITU-T P.863 is lower than that evaluated based on
ITU-T P.862.1. On live networks, the same standard should be used for evaluating the benefits in MOS
before and after the AMR-WB technology is used, and therefore ITU-T P.863 should be used.
On live networks, the actual MOS is slightly lower than that shown in the preceding figure because
BLER cannot be 0.

Restrictions
An AMR call is regarded as an AMR-WB service only when the CN, RAN, calling UE, and
called UE support AMR-WB. Otherwise, the AMR call is still an AMR-NB service.
On live networks, when a UE that supports AMR-WB calls a UE that does not support AMR-WB, CNs
from different vendors handle this situation in different ways. Generally, the CN reassigns the RAB for
the UE that supports AMR-WB and the AMR call becomes an AMR-NB call.

Applications of AMR-WB Services


On live networks, AMR-WB services usually use the recommended rate set 0 (the maximum
rate is 12.65 kbit/s) or 4 (the maximum rate is 23.85 kbit/s). The maximum rates of gold,
silver, and copper users can be set by configuring the GoldMaxMode, SilverMaxMode, and
CopperMaxMode parameters on the RNC.
AMR-WB services are under license control on the RNC and are not controlled by a switch.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

15

WCDMA RAN
AMR Feature Parameter Description

5 Technical Description of TFO/TrFO

Technical Description of TFO/TrFO

This chapter describes the WRFD-011600 TFO/TrFO feature.

Introduction
1.

Definition of TFO/TrFO
The TFO/TrFO function is used to prevent tandeming codecs in the traditional UE-UE
calling procedure. The corresponding feature is WRFD-011600 TFO/TrFO. For details
about TFO and TrFO, see 3GPP TS 28.062. Only the TrFO function is used on the RAN
side in the UMTS network and TFO/TrFO in this document refers to TrFO.
As shown in the following figure, the traditional UE-UE calling procedure includes two
coding operations and two decoding operations. When the calling UE and the called UE
use the same AMR rate set, the TrFO function enables compressed speech frames to be
directly transmitted between the two UEs, without the need for the second speech
coding/decoding.
Figure 5-1 Codec operations after the TrFO function is enabled

2.

Prerequisites for TFO/TrFO


The TFO/TrFO function takes effect only when the calling party and the called party use
the same AMR rate. To enable the rate adjustment between two parties, IuUP v2 that
supports bi-directional AMR rate adjustment between the RNC and CN must be used
over the Iu interface. For details about the bi-directional AMR rate adjustment between
the RNC and CN, see 3GPP TS 25.415.
The following figures show the signaling procedures when IuUP v1 and IuUP v2 are
used over the Iu interface, respectively.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

16

WCDMA RAN
AMR Feature Parameter Description

5 Technical Description of TFO/TrFO

Figure 5-2 the signaling procedures of IuUP version 2

Benefits
The following table uses AMR-NB services as an example and lists the TFO/TrFO gains
evaluated based on ITU-T P.862.1.
Table 5-1 AMR-NB TFO/TrFO MOS gains evaluated based on ITU-T P.862.1 (BLER=0%)
Scenar
io

12.2
kbit/s

10.2
kbit/s

7.95
kbit/s

7.4
kbit/s

6.7
kbit/s

5.9
kbit/s

5.15
kbit/s

4.75
kbit/s

TrFO/T
FO
enabled

4.12

4.05

3.85

3.8

3.7

3.6

3.45

3.32

TrFO/T
FO
disable
d

3.95

3.88

3.61

3.55

3.42

3.33

3.16

3.01

On live networks, the actual MOS is slightly lower than that shown in the preceding table because
BLER cannot be 0.

Restrictions

If there are two or more rates in the current AMR rate set and the AMRC function is not
enabled, the TFO/TrFO function cannot take effect because the rate of the calling UE
may be different from that of the called UE.

If the TFO/TrFO function is to be used between a UMTS UE and a GSM UE, the
TFO/TrFO function must be supported on the GSM side.

Applications of TFO/TrFO
To enable the TFO/TrFO function, select the CS_IUUP_V2_SUPPORT_SWITCH check
box under the CsSwitch(BSC6900,BSC6910) parameter in the SET
UCORRMALGOSWITCH command on the RNC.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

17

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

Technical Description of AMR/WB-AMR


Speech Rates Control

6.1 Overview
The AMRC function can be divided into the following types based on the triggering reasons.
For details about the definition of AMRC, see section 3.3 AMR Rate Control.

AMRC based on LDR


The RNC triggers rate adjustment based on the cell congestion state.
When cell resources are congested, the AMRC reduces resources such as power, codes,
and Iub bandwidth occupied by each AMR UE by reducing the rate of the UE. This
enables more UEs to access the cell.

AMRC based on link stability


The RNC triggers rate adjustment based on the link stability.
When a UE is in a weak coverage area, the AMRC increases the coverage radius for the
AMR UE by reducing its rate. This prevents call drops or the speech quality from
deteriorating rapidly.

AMRC based on TFO/TrFO


The RNC triggers rate adjustment based on the request of the peer RNC. Especially in
the scenario when the peer RNC performs downlink AMRC based on LDR or link
stability, the local RNC performs uplink AMRC as a response to the rate adjustment
request from the peer RNC.
When both the calling UE and called UE use TFO/TrFO, the local RNC and peer RNC
should support AMRC based on TFO/TrFO. Otherwise, if the peer RNC requests a rate
decrease but the local RNC cannot fulfill the task, the peer RNC will continue to use the
original rate. In this case, the AMRC function does not take effect.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

18

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

The local RNC receives an AMR rate adjustment request from the peer RNC only when the peer
RNC triggers downlink AMRC. When the peer RNC triggers uplink AMRC, the peer RNC only
needs to interact with the UE.

If the TFO/TrFO function is not enabled, the coder of the CN responds to the AMR rate adjustment
request sent from the peer RNC, and therefore the local RNC will not receive the request. If the
TFO/TrFO function is enabled, the coder of the CN does not perform coding or decoding, and the
CN transfers the AMR rate adjustment request sent by the peer RNC to the local RNC. In this case,
the local RNC handles the AMR rate adjustment request triggered by the peer RNC.

The application of AMRC is heavily dependent on the UE and some UEs may have
compatibility issues during uplink AMR rate adjustment. In this case, the MBR in the uplink
AMR controllable rate set is the same as the GBR to disable the AMRC function. During
downlink AMR rate adjustment, no special processing is performed on these UEs. For details
about special processing for UEs with compatibility issues, see Terminal Black List Feature
Parameter Description.
In scenarios of combined services, it is recommended that PS services be carried on DCHs
and the rates on DCHs be set to 8 kbit/s or 16 kbit/s. For details about this configuration, see
Enhanced Combined Service Feature Parameter Description.

6.2 AMRC Based on LDR


When a cell enters the load reshuffling (LDR) state, the MBR is decreased to the GBR in the
AMR controllable rate set. When the cell exits from the LDR state, the MBR remains the
same as the GBR and will not be adjusted. For details about the LDR function, see the Load
Control Feature Parameter Description.
When the AMRC function is used to decrease the rate of 23.85 kbit/s AMR-WB services,
downlink code congestion can be relieved through downlink code reallocation. Whether
downlink code reallocation is enabled is controlled by the
CS_WAMR_SF_RECONF_SWITCH under the CsSwitch(BSC6900,BSC6910)parameter.

6.3 AMRC Based on Link Stability


AMRC based on link stability enables the RNC to adjust the rate of AMR services according
to events received. For details about rate adjustment, see section 6.3.1 AMRC Performance.
For details about the events, see section 6.3.2 Link Stability Measurement.
AMRC based on link stability takes effect only whenthe
AMRQosPerform(BSC6900,BSC6910)parameter in the SET UQOSACT command is set to
ON and the AMRC function is enabled.

6.3.1 AMRC Performance


AMRC based on link stability enables the RNC to adjust the rate of AMR services according
to events received. If the current rate is GBR before a rate decrease, the RNC performs an
inter-frequency or inter-RAT handover.
During uplink AMRC, after receiving a report for rate adjustment, if the RNC receives no
report for stopping the rate adjustment before the timer specified by the
AmrUlRateAdjTimerLen(BSC6900,BSC6910) or
WAmrUlRateAdjTimerLen(BSC6900,BSC6910) parameter expires, the RNC continues to

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

19

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

perform rate adjustment. This avoids frequent rate adjustments. The following is an example
of rate increase:
1.

After receiving a report on event 6B2 from a UE, the RNC increases the rate for the UE
and starts the rate adjustment timer at the same time.

2.

If the RNC receives a report on event 6A2 before the timer expires, the rate increase
succeeds and the RNC stops the timer.

3.

If the RNC does not receive a report on event 6A2 before the timer expires, the rate
adjustment fails and the RNC restarts the timer. Rate increase is performed continually
until a report on event 6A2 is received.

During downlink AMRC, the RNC adjusts the rate only once after receiving a report for rate
adjustment.
The following table lists the basic principles of AMRC based on link stability.
Table 6-1 Basic principles of AMRC based on link stability
Direction

Event

AMRC Enabled

AMRC Disabled

Uplink

6D or 6A1

Decrease the rate. If


the current rate is
GBR, start
measurement for
handovers.

Inter-RAT or
inter-frequency
handover

6B1

Stop decreasing the


rate

6A2

Stop increasing the


rate

6B2

Increase the rate. If


the current rate is
MBR, stop
increasing the rate.

E1

Decrease the rate. If


the current rate is
GBR, start
measurement for
handovers.

Inter-RAT or
inter-frequency
handover

E2

Stop decreasing the


rate

F2

Stop increasing the


rate

F1

Increase the rate. If


the current rate is
MBR, stop
increasing the rate.

Ea

Inter-RAT or
inter-frequency
handover

(UE transmit power)

Downlink
(transmit power on
DPDCH)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

20

WCDMA RAN
AMR Feature Parameter Description

Direction

6 Technical Description of AMR/WB-AMR Speech


Rates Control

Event

AMRC Enabled

AMRC Disabled

Eb

Inter-RAT or
inter-frequency
handover

Events 6A, 6B, F, and E are all measurement types defined in the 3GPP specifications. The digits
and lower-case letters are used to distinguish between measurement sets of the same type.
Measurement control parameters (such as threshold and hysteresis) of different measurement sets
can be delivered and processed separately. For example, the RNC delivers two sets of measurement
control parameters M1 and M2 to the UE. Then, event 6A reported by the UE based on M1 is
considered as event 6A1 and event 6A reported by the UE based on M2 is considered as event 6A2.

Handover action is controlled by the follow switches.


If the uplink AMR inter-frequency handover switch
UlQosAmrInterFreqHoSwitch(BSC6900,BSC6910) or
UlQosWAmrInterFreqHoSwitch(BSC6900,BSC6910) is set to YES, the RNC performs an
inter-frequency handover.
If the uplink AMR inter-RAT handover switch UlQosAmrInterRatHoSwitch(BSC6900,BSC6910)
or UlQosWAmrInterRatHoSwitch(BSC6900,BSC6910) is set to YES, the RNC performs an
inter-RAT handover.
If the downlink AMR inter-frequency handover switch
DlQosAmrInterFreqHoSwitch(BSC6900,BSC6910) or
DlQosWAmrInterFreqHoSwitch(BSC6900,BSC6910) is set to YES, the RNC performs an
inter-frequency handover.
If the downlink AMR inter-RAT handover switch DlQosAmrInterRatHoSwitch(BSC6900,BSC6910)
or DlQosWAmrInterRatHoSwitch(BSC6900,BSC6910) is set to YES, the RNC performs an
inter-RAT handover.
If inter-frequency handover switches and inter-RAT handover switches are set to YES,
inter-frequency measurement and inter-RAT measurement are started at the same time. Then, the
RNC decides whether to perform an inter-frequency or inter-RAT handover based on the first report
received from the UE.

6.3.2 Link Stability Measurement


Measurement for Event 6A1/6B1/6A2/6B2/6D
Events 6A1, 6A2, 6B1, 6B2 and 6D below is triggered as shown in Figure 6-1.

If the UE transmit power is above the threshold of event 6A1 for the transmit power for a
period of time specified by UlAmrTrigTime6A1(BSC6900,BSC6910), event 6A1 is
triggered.

If the UE transmit power is below the threshold of event 6B1 for the transmit power for a
period of time specified by UlAmrTrigTime6B1(BSC6900,BSC6910), event 6B1 is
triggered.

If the UE transmit power is below the threshold of event 6B2 for the transmit power for a
period of time specified by UlAmrTrigTime6B2(BSC6900,BSC6910), event 6B2 is
triggered.

If the UE transmit power is above the threshold of event 6A2 for the transmit power for a
period of time specified by UlAmrTrigTime6A2(BSC6900,BSC6910) event 6A2 is
triggered.

If the UE transmit power is equal to the maximum transmit power for a period of time
specified by UlAmrTrigTime6D(BSC6900,BSC6910), event 6D is triggered.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

21

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

Figure 6-1 Uplink events and the corresponding thresholds

Events 6A1, 6A2, 6B1, and 6B2 have different thresholds. These thresholds are determined
by the maximum uplink transmit power for conversational services and relative threshold of
each event. Delta_6a1, Delta_6b1, Delta_6a2, and Delta_6b2 are relative thresholds. The
threshold of event 6D is the maximum transmit power of the UE, as shown in the figure
above.
The thresholds are calculated using the following formulas:

Threshold of event 6A1 for the transmit power =


MaxUlTxPowerforConv(BSC6900,BSC6910) - UlThd6A1(BSC6900,BSC6910)

Threshold of event 6B1 for the transmit power =


MaxUlTxPowerforConv(BSC6900,BSC6910) - UlThd6B1(BSC6900,BSC6910)

Threshold of event 6A2 for the transmit power =


MaxUlTxPowerforConv(BSC6900,BSC6910) - UlThd6A2(BSC6900,BSC6910)

Threshold of event 6B2 for the transmit power =


MaxUlTxPowerforConv(BSC6900,BSC6910) - UlThd6B2(BSC6900,BSC6910)

Threshold of event 6D for the transmit power =


MaxUlTxPowerforConv(BSC6900,BSC6910)

Measurement for Event E1/E2/F1/F2


Events E1,E2,F1 and F2 below is triggered as shown in Figure 6-2.

When the average transmit power of the DPDCH is above the threshold of event E1 for
the transmit power, event E1 is triggered.

When the average transmit power of the DPDCH is below the threshold of event E2 for
the transmit power, event E2 is triggered.

When the average transmit power of the DPDCH is below the threshold of event F1 for
the transmit power, event F1 is triggered.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

22

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

When the average transmit power of the DPDCH is above the threshold of event F2 for
the transmit power, event F2 is triggered.

Figure 6-2 Downlink events and the corresponding thresholds

Events E1, E2, F1, and F2 have different thresholds. These thresholds are determined by the
maximum downlink DPDCH transmit power and relative thresholds of each event. Delta_E1,
Delta_E2, Delta_F1, and Delta_F2 are relative thresholds, as shown in Figure above.
The thresholds are calculated using the following formulas:

Threshold of event E1 for the transmit power = PPCPICH +


RlMaxDlPwr(BSC6900,BSC6910) - DlThdE1(BSC6900,BSC6910)

Threshold of event E2 for the transmit power = PPCPICH +


RlMaxDlPwr(BSC6900,BSC6910) - DlThdE2(BSC6900,BSC6910)

Threshold of event F1 for the transmit power = PPCPICH +


RlMaxDlPwr(BSC6900,BSC6910) - DlThdF1(BSC6900,BSC6910)

Threshold of event F2 for the transmit power = PPCPICH +


RlMaxDlPwr(BSC6900,BSC6910) - DlThdF2(BSC6900,BSC6910)

PPCPICH is the power for P-CPICH. RlMaxDlPwr(BSC6900,BSC6910) is the power offset


relative to P-CPICH.

Measurement for Event Ea/Eb

If the transmit power in the pilot field of the DPCCH is above the threshold of event Ea
for a period of time specified by DlAmrTrigTimeE(BSC6900,BSC6910), event Ea is
triggered.

If the transmit power in the pilot field of the DPCCH is below the threshold of event Eb
for a period of time specified by DlAmrTrigTimeE(BSC6900,BSC6910), event Eb is
triggered.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

23

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

The threshold of event Ea or Eb is calculated using the following formula:


E threshold = Maximum DL power - Relative threshold + PO3

E threshold is the threshold of event Ea or Eb.

PO3 is the offset of the transmit power in the pilot field of the DPCCH relative to the
transmit power of the DPDCH and is specified by the PilotPo(BSC6900,BSC6910)
parameter in the SET UFRC command.

Relative threshold is the relative threshold of event Ea or Eb, specified by the parameter
ThdEa(BSC6900,BSC6910) or ThdEb(BSC6900,BSC6910), respectively.

Maximum downlink power is the maximum downlink transmit power of DPDCHs and is
specified by the RlMaxDlPwr(BSC6900,BSC6910) parameter in the ADD
UCELLRLPWR command.

The NodeB periodically reports the measurement results of the transmit power to the RNC.
The period for the NodeB to report measurement results is specified by the parameter
ChoiceRptUnitForAmrE(BSC6900,BSC6910), TenMsecForAmrE(BSC6900,BSC6910), or
MinForAmrE(BSC6900,BSC6910).

6.4 AMRC Based on TFO/TrFO


AMRC based on TFO/TrFO is not controlled by a switch and is enabled by default when the
following features are enabled:

WRFD-011600 TFO/TrFO

WRFD-020701 AMR/WB-AMR Speech Rates Control

Figure 6-3 below shows the signaling procedure of the AMRC based on TFO/TrFO function.
When the local RNC receives a RATE CONTROL message from the peer RNC, the local
RNC determines to adjust the uplink rate if either of the following conditions is met:

The RATE CONTROL message contains a rate decrease requirement.

The RATE CONTROL message contains a rate increase requirement and the following
conditions are met at the same time.

The local RNC needs to increase the uplink rate according to the local UE's transmit
power.

The uplink load of the cell where the local UE is located is in normal state.

The Iub resources of the cell where the local UE is located are sufficient.

When the local RNC determines to adjust the rate, it sends a TFC CONTROL message to the
local UE. If the local RNC does not receive a TFC CONTROL FAILURE message before the
AMRC response timer expires, it sends a RATE CONTROL ACK message to the peer RNC.
If the local RNC determines not to adjust the rate, it does not send a RATE CONTROL NACK message
to the peer RNC by default. To enable the local RNC to send a RATE CONTROL NACK message to the
peer RNC in this situation, select the PERFENH_AMRC_NACK_SWITCH check box under the
PerfEnhanceSwitch3(BSC6900,BSC6910) parameter.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

24

WCDMA RAN
AMR Feature Parameter Description

6 Technical Description of AMR/WB-AMR Speech


Rates Control

Figure 6-3 Signaling procedure of the AMRC based on the TFO/TrFO function

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

25

WCDMA RAN
AMR Feature Parameter Description

7 Speech Quality Assessment and Maintenance

Speech Quality Assessment and


Maintenance

Speech Quality Assessment


The enhanced voice quality indicator (EVQI) can be used to assess the speech quality.
EVQI is calculated using the block error rate (BLER), bit error rate (BER), and speech rate. It
is used to measure the speech quality of AMR-NB and AMR-WB services.
The value range of EVQI is 0 to 500, which corresponds to the MOS (0 to 5) evaluated based
on ITU-T P.863. Speech qualities indicated by the EVQI values can be divided into five levels:
EXCELLENT, GOOD, ACCEPT, POOR, and BAD.
To assess the speech quality of AMR services using EVQI, perform the following operations:

EVQI is classified into uplink EVQI and downlink EVQI.

Run the RNC MML command SET URRCTRLSWITCH, and select the
UL_EVQI_SWITCH check box under the PROCESSSWITCH5 parameter to
enable EVQI in the uplink or select the DL_EVQI_SWITCH check box to enable
EVQI in the downlink.

EVQI can be measured every 2, 3, 4, 6, 8, or 12 seconds.

Run the RNC MML command SET UEVQIPARA to specify the measurement
period of EVQI in the uplink.

Run the RNC MML command SET UMRCTRL to specify the measurement period
of EVQI in the downlink because downlink BLER reported by the UE is required in
the measurement of the downlink EVQI.

EVQI value can be divided to five levels.

Run the RNC MML command SET UEVQIPARA to specify the thresholds for the
following speech-quality levels: EXCELLENT, GOOD, ACCEPT, POOR, and BAD.

Speech Quality Maintenance


One-way audio means that only one party in a call can hear the voice. To enlarge the detection
range, speech discontinuity experienced by the user is also considered as a one-way audio. It
is considered that a one-way audio occurs when either of the following conditions is met:

Issue 01 (2014-04-30)

The proportion of lost frames within three consecutive two seconds exceeds the
threshold (20% by default) in one direction.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

26

WCDMA RAN
AMR Feature Parameter Description

7 Speech Quality Assessment and Maintenance

The proportion of error frames within three consecutive two seconds exceeds the
threshold (20% by default) in one direction, and the number of consecutive error frames
exceeds the threshold (0 by default).

The RNC supports one-way audio detection for speech services both in the uplink and
downlink.
To enable one-way audio detection, perform the following operations:

To enable one-way audio detection for AMR-NB services.

To enable one-way audio detection for AMR-WB services.

Run the RNC MML command SET UDPUCFGDATA to set the


SilentContinueFrameThd to 0.

To enable the tracing function.

Issue 01 (2014-04-30)

Run the RNC MML command SET UDPUCFGDATA to set the SilentDetectThd to
20.

To set the threshold of maximum allowable number of consecutive error frames.

Run the RNC MML command SET URRCTRLSWITCH,and select the


AMRWB_SILENT_DETECT_SWITCH under the FunctionSwitch.

To set the threshold of maximum allowable proportion of error or lost frames.

Run the RNC MML command SET URRCTRLSWITCH,and select the


AMR_SILENT_DETECT_SWITCH under the FunctionSwitch.

Run the RNC MML command SET UDPUCFGDATA to set the SilentTraceSwitch
parameter to ON, UE tracing is started once the RNC detects a one-way audio
occurrence. This facilitates subsequent analysis.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

27

WCDMA RAN
AMR Feature Parameter Description

8 Related Features

Related Features

8.1 WRFD-010613 AMR-WB


Prerequisite Features
WRFD-020701 AMR/WB-AMR Speech Rates Control

If the maximum rate for AMR-WB services is 23.85 kbit/s, the WRFD-020701 AMR/WB-AMR
Speech Rates Control feature must be enabled.

If the maximum rate for AMR-WB services is 12.65 kbit/s, the WRFD-020701 AMR/WB-AMR
Speech Rates Control feature is not required.

Mutually Exclusive Features


None

Impacted Features
WRFD-011600 TFO/TrFO
To obtain the optimal voice quality, it is recommended that AMR-WB and TFO/TrFO be used together.

8.2 WRFD-011600 TFO/TrFO


Prerequisite Features
WRFD-020701 AMR/WB-AMR Speech Rates Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

28

WCDMA RAN
AMR Feature Parameter Description

8 Related Features

If there are two or more rates in the AMR rate set carried in the RAB assignment message before
TFO/TrFO is enabled, you need to enable WRFD-020701 AMR/WB-AMR Speech Rates Control
when enabling WRFD-011600 TFO/TrFO.

If there is only one rate in the AMR rate set carried in the RAB assignment message before
TFO/TrFO is enabled, you can enable WRFD-011600 TFO/TrFO without enabling WRFD-020701
AMR/WB-AMR Speech Rates Control.

Mutually Exclusive Features


None

Impacted Features
None

8.3 WRFD-020701 AMR/WB-AMR Speech Rates Control


Prerequisite Features
None

Mutually Exclusive Features


None

Impacted Features
None

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

29

WCDMA RAN
AMR Feature Parameter Description

9 Network Impact

Network Impact

9.1 WRFD-010613 AMR-WB


System Capacity
AMR-NB services (12.2 kbit/s MBR), AMR-WB services (12.65 kbit/s MBR), and AMR-WB
services (23.85 kbit/s MBR) differ from one another in resource consumption and air interface
capacity, as described in Table below.
Comparison of the three types of services in resource consumption and air interface capacity
Item

AMR-NB
(12.2 kbit/s)

AMR-WB
(12.65 kbit/s)

AMR-WB
(23.85 kbit/s)

Downlink code

SF128

SF128

SF64

Uplink CE

Relative proportion
of UEs in case of
uplink load
congestion

100%

90%

60%

Relative proportion
of UEs in case of
downlink power
congestion

100%

90%

55%

When the maximum rate for AMR-WB services is 23.85 kbit/s, WRFD-020701
AMR/WB-AMR Speech Rates Control needs to be enabled so that the rate can be decreased
when resources are insufficient.

Network Performance
AMR-NB services (12.2 kbit/s MBR), AMR-WB services (12.65 kbit/s MBR), and AMR-WB
services (23.85 kbit/s MBR) differ from one another in coverage radius, as described in Table
below.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

30

WCDMA RAN
AMR Feature Parameter Description

9 Network Impact

Comparison of the relative coverage proportion between AMR-WB services and AMR-NB
services
Item

AMR-NB
(12.2 kbit/s)

AMR-WB
(12.65 kbit/s)

AMR-WB
(23.85 kbit/s)

Uplink coverage
radius in case of
limited uplink
coverage

100%

96%

87%

With the same downlink transmit power, the cell coverage for 23.85 kbit/s AMR-WB services
is smaller than that for 12.2 kbit/s AMR-NB services, and as a result the call drop rate for
23.85 kbit/s AMR-WB services is higher. Therefore, WRFD-020701 AMR/WB-AMR Speech
Rates Control needs to be enabled together with 23.85 kbit/s AMR-WB services so that the
rate can be decreased in limited coverage scenarios.
When a UE that supports AMR-WB calls a UE that does not support AMR-WB, RABs are
assigned twice (first for AMR-WB and then for AMR-NB) during the call and the call drop
rate increases.
To prevent the CN from assigning RABs twice in the preceding scenario, it is recommended that the CN
assigns the RAB for the called party before assigning the RAB for the calling party.

9.2 WRFD-011600 TFO/TrFO


System Capacity
No impact.

Network Performance
No impact.

9.3 WRFD-020701 AMR/WB-AMR Speech Rates Control


System Capacity
This feature increases the number of admitted UEs when uplink load congestion or downlink
power congestion occurs. The following table compares the relative proportion of admitted
UEs when different types of services are processed.
Comparison of the relative proportion of admitted UEs when different types of services are
processed

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

31

WCDMA RAN
AMR Feature Parameter Description

9 Network Impact

Item

AMRNB
(12.2
kbit/s)

AMRNB
(7.95
kbit/s)

AMRNB
(4.75
kbit/s)

AMRWB
(6.6
kbit/s)

AMRWB
(8.85
kbit/s)

AMRWB
(12.65
kbit/s)

AMRWB
(15.85
kbit/s)

AMRWB
23.85
(kbit/s
)

Relativ
e
proport
ion of
admitte
d UEs
in case
of
uplink
load
congest
ion

100%

122%

155%

120%

107%

88%

77%

58%

Relativ
e
proport
ion of
admitte
d UEs
in case
of
downli
nk load
congest
ion

100%

120%

149%

133%

109%

89%

73%

55%

Network Performance
This feature provides noticeable uplink coverage gains, which improves the experience of cell
edge users.
Table below compares the relative coverage proportion when different types of services are
processed.
Table 9-1 Comparison of relative coverage proportion when different types of services are
processed
Item

AMRNB
(12.2
kbit/s)

AMRNB
(7.95
kbit/s)

AMRNB
(4.75
kbit/s)

AMRWB
(6.6
kbit/s)

AMRWB
(8.85
kbit/s)

AMRWB
(12.65
kbit/s)

AMRWB
(15.85
kbit/s)

AMRWB
23.85
(kbit/s
)

Uplink
coverag
e radius
in case

100%

109%

117%

106%

103%

96%

94%

87%

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

32

WCDMA RAN
AMR Feature Parameter Description

Item

AMRNB
(12.2
kbit/s)

9 Network Impact

AMRNB
(7.95
kbit/s)

AMRNB
(4.75
kbit/s)

AMRWB
(6.6
kbit/s)

AMRWB
(8.85
kbit/s)

AMRWB
(12.65
kbit/s)

AMRWB
(15.85
kbit/s)

AMRWB
23.85
(kbit/s
)

of
limited
uplink
coverag
e

Other Impacts
To enable this feature, UEs must support AMRC. If some UEs have compatibility issues with
AMRC, add these UEs to the AMRC blacklist. For details, see Terminal Black List Feature
Parameter Description.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

33

WCDMA RAN
AMR Feature Parameter Description

10

10 Engineering Guidelines

Engineering Guidelines

10.1 WRFD-010613 AMR-WB (Adaptive Multi Rate Wide


Band)
10.1.1 When to Use This Feature
The AMR-WB feature helps improve the speech quality and user experience. You are advised
to observe the following rules when using this feature:

Use the AMR-WB rate set numbered 0 or 4. When AMR-WB rate set 4 (with the
maximum rate 23.85 kbit/s) is used, the WRFD-020701 AMR/WB-AMR Speech Rates
Control feature must be enabled to adaptively decrease the rate of AMR-WB services in
the case of resource insufficiency or coverage limitation.

Use this feature together with the WRFD-011600 TFO/TrFO feature to achieve the
optimal AMR-WB voice effect.

EVQI can be used to monitor the speech quality of AMR-WB services. It is


recommended that EVQI be enabled before the WRFD-011600 TFO/TrFO feature. For
details about how to enable EVQI, see chapter 7 Speech Quality Assessment and
Maintenance.

10.1.2 Information to Be Collected


None

10.1.3 Network Planning


None

10.1.4 Feature Deployment


Requirements
Related Features
For details, see section 8.1 WRFD-010613 AMR-WB

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

34

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Hardware
None

License
Feature
ID

Feature
Name

License
Control Item

NE

Sales

WRFD-010613

AMR-WB

AMR-WB
(Adaptive Multi
Rate Wide
Band) (per Erl)

BSC6900
BSC6910

per Erl

Unit

Other Requirements

CN side

1.

Enable the AMR-WB feature on the RNC side and then on the CN side.

2.

The AMR-WB feature is enabled on the CN side. In addition, the CN should send the
RAB assignment request to the called party prior to the calling party. Otherwise, when a
UE supporting AMR-WB (calling party) makes a call to a UE supporting AMR-NB, the
CN sends two RAB assignment requests to the calling party.

UE side
UEs must comply with versions later than 3GPP Release 5 and support this feature.

Data Preparation
Parameter
Name

Parameter

Max Mode Of
Wideband AMRC
for Golden Users

Max Mode of
Wideband AMRC
for Silver Users

Issue 01 (2014-04-30)

Setting
Description

Source

GoldMaxMode(BS
C6900,BSC6910)

The recommended
value is
WBAMR_BITRAT
E_23.85K. If the
maximum bit rate
configured for the
live network is
12.65 kbit/s, the
recommended value
is
WBAMR_BITRAT
E_12.65K.

Radio planning

SilverMaxMode(BS
C6900,BSC6910)

The recommended
value is
WBAMR_BITRAT
E_23.85K. If the
maximum bit rate
configured for the
live network is
12.65 kbit/s, the
recommended value

Radio planning

ID

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

35

WCDMA RAN
AMR Feature Parameter Description

Parameter
Name

10 Engineering Guidelines

Parameter

ID

Setting
Description

Source

is
WBAMR_BITRAT
E_12.65K.
Max Mode of
Wideband AMRC
for Copper Users

CopperMaxMode(B
SC6900,BSC6910)

The recommended
value is
WBAMR_BITRAT
E_23.85K. If the
maximum bit rate
configured for the
live network is
12.65 kbit/s, the
recommended value
is
WBAMR_BITRAT
E_12.65K.

Radio planning

Neighboring RNC
Supporting
WB-AMR
Indication

WAmrSuppInd(BS
C6900,BSC6910)

Set the parameter


based on the actual
situation.

Radio planning

Precautions
None

Activation
Using MML Commands
1.

Run the RNC MML command SET UAMRCWB to set RNC-level AMR-WB speech
rates for gold, silver, and copper users.

2.

(Optional) Run the RNC MML command ADD UCELLAMRCWB to set cell-level
AMR-WB speech rates for gold, silver, and copper users.

3.

Run the RNC MML command MOD UNRNC and specify the WAmrSuppInd
parameter based on the actual situation. The value 0 indicates that neighboring cells
support AMR-WB services. The value 1 indicates that neighboring cells do not support
AMR-WB services.

4.

Run the RNC MML command MOD UTYPRABSEMISTATICTF with RabIndex set
to 1, SubflowIndex to 0, and UlRateMatchingAttr and DlRateMatchingAttr to 127.

5.

Run the RNC MML command MOD UTYPRABSEMISTATICTF with RabIndex set
to 1, SubflowIndex to 1, and UlRateMatchingAttr and DlRateMatchingAttr to 127.

6.

Run the RNC MML command MOD UTYPRABBASIC with RabIndex set to 1,
BetaC to 10 (23.85 kbit/s)or 12 (12.65 kbit/s), and BetaD to 15.

7.

Run the RNC MML command MOD UCELLRLPWR with RlMaxDlPwr set to 30.
RlMaxDlPwr indicates the maximum transmit power for 23.85 kbit/s AMR-WB
services.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

36

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

---End

MML Command Examples


//Setting RNC-level parameters related to the WB-AMRC algorithm
SET UAMRCWB:
GoldMaxMode=WBAMR_BITRATE_23.85K, SilverMaxMode=WBAMR_BITRATE_23.85K,
CopperMaxMode=WBAMR_BITRATE_23.85K;
//(Optional) Adding cell-level parameters related to the WB-AMRC algorithm
ADD UCELLAMRCWB: CellId=111, GoldMaxMode=WBAMR_BITRATE_23.85K,
SilverMaxMode=WBAMR_BITRATE_23.85K, CopperMaxMode=WBAMR_BITRATE_23.85K;
//Disabling the AMR-WB on the neighboring RNC
MOD UNRNC: NRncId=xx, WAmrSuppInd=YES;
//Setting the rate matching attributes of AMR-WB subflow A
//Setting the rate matching attributes of AMR-WB subflow B
MOD UTYPRABSEMISTATICTF: RabIndex=1, SubflowIndex=1, UlRateMatchingAttr=127,
DlRateMatchingAttr=127;
//Setting power control parameters for AMR-WB services
MOD UTYPRABBASIC: RabIndex=1, BetaC=10, BetaD=15;
//Setting the maximum downlink transmit power of 23.85 kbit/s AMR-WB services
MOD UCELLRLPWR: CellId=XX, CNDomainId=CS_DOMAIN, MaxBitRate=23850, RlMaxDlPwr=30;

Using the CME


When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

1.

Configure a single object on the CME.


Set parameters on the CME according to the operation sequence in Table below. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.

2.

(Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click


on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 on the wizard interface to obtain online help.
Table 10-1 Configuring the parameters on the CME
SN

MO

NE

Parameter
Name

Parameter
ID

Configura
ble
in
CME Batch
Modificati
on
Center

UAMRCW
B

RNC

Max Mode
Of
Wideband
AMRC for
Golden
Users

GoldMaxMo
de

Yes

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

37

WCDMA RAN
AMR Feature Parameter Description

SN

Issue 01 (2014-04-30)

10 Engineering Guidelines

MO

UCELLAM
RCWB

UNRNCRS
VPARA

UTYPRABS
EMISTATI
CTF

NE

RNC

RNC

RNC

Parameter
Name

Parameter
ID

Max Mode
of
Narrowband
AMRC for
Silver Users

SilverMaxM
ode

Max Mode
of
Narrowband
AMRC for
Copper
Users

CopperMax
Mode

Cell ID

CellId

Max Mode
Of
Wideband
AMRC for
Golden
Users

GoldMaxMo
de

Max Mode
of
Narrowband
AMRC for
Silver Users

SilverMaxM
ode

Max Mode
of
Narrowband
AMRC for
Copper
Users

CopperMax
Mode

Neighboring
RNC ID

NRncId

Neighboring
RNC
Supporting
WB-AMR
Indication

:RESERVE
D_SWITCH
_0_BIT3

Service
parameter
index

RabIndex

Service
subflow

SubflowInde

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Configura
ble
in
CME Batch
Modificati
on
Center

Yes

Yes

WAmrSuppI
nd
Yes

38

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

UTYPRAB
BASIC

UCELLRLP
WR

NE

RNC

RNC

Parameter
Name

Parameter
ID

index

UL rate
matching
attribute

UlRateMatc
hingAttr

DL rate
matching
attribute

DlRateMatc
hingAttr

Service
parameter
index

RabIndex

Reference
BetaC

BetaC

Reference
BetaD

BetaD

Cell ID

CellId

CN domain
ID

CNDomainI
d

Max bit rate


of service

MaxBitRate

RL Max DL
TX power

RlMaxDlPw
r

Configura
ble
in
CME Batch
Modificati
on
Center

Yes

Yes

Activation Observation
1.

On the RNC LMT, open the Monitor tab page. In the navigation tree, choose Monitor >
UMTS Monitoring and double-click Connection Performance Monitoring. In the
displayed dialog box, set Monitor Item to AMR Mode and specify IMSI.

2.

On the RNC LMT, open the Trace tab page. In the navigation tree, choose Trace >
UMTS Services and double-click Uu Interface Trace. In the displayed dialog box,
specify the RNC ID and cell ID, as shown in Figure below.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

39

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Figure 10-1 Uu interface tracing

3.

Get ready two UEs that support AMR-WB: UE 1 and UE 2. Use UE 1 to call UE 2 to
verify that calls are being successfully established.

4.

Ensure that an AMR-WB rate, such as 23.85 kbit/s or 12.65 kbit/s is displayed in the
Connection Performance Monitoring dialog box, as shown in Table below.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

40

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Figure 10-2 AMR mode

Deactivation
This feature is not under switch control. You can deactivate this feature by deactivating its
license.

Using MML Commands


None

MML Command Examples


None

Using the CME


None

10.1.5 Performance Monitoring


1.

Penetration of UEs that support AMR-WB services


The VS.AttCall.UECapab.AMRWB counter measures the number of calls initiated by
UEs that support AMR-WB services in a cell.

2.

Impact of AMR-WB on SF resource occupancy


The VS.RAB.SFOccupy counter measures the average SF occupancy in a cell.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

41

WCDMA RAN
AMR Feature Parameter Description

3.

10 Engineering Guidelines

Impact of AMR-WB on power resource consumption


The VS.MeanTCP counter measures the transmitted carrier power (TCP) in a cell.

4.

RAB setup success rate of AMR-WB services


The VS.RAB.AttEstabCS.AMRWB and VS.RAB.SuccEstabCS.AMRWB counters
measure the RAB setup success rate of AMR-WB services in a cell.

5.

Call drop rate of AMR-WB services


The VS.RAB.NormRel.AMRWB and VS.RAB.AbnormRel.AMRWB counters can be
used to calculate the call drop rate of AMR-WB services.

6.

Speech quality of AMR-WB services

Use an MOS tester that supports ITU-T P.863 to measure the MOSs before and after
the AMR-WB feature is enabled.

The MOS is affected by instruments, voice samples, and evaluation standards (such as P.862/P.863).
Therefore, ensure that the same instruments, voice samples, and evaluation standards are used before
and after the AMR-WB feature is enabled.

Monitor the values of the following EVQI-related counters to evaluate the speech
quality of AMR services after the AMR-WB feature is enabled.

Counter Name

Counter Description

VS.EVQI.AMRWB.UL.Excellent.Num

Number of Times the Uplink EVQI of


AMR-WB Services Is EXCELLENT

VS.EVQI.AMRWB.UL.Good.Num

Number of Times the Uplink EVQI of


AMR-WB Services Is GOOD

VS.EVQI.AMRWB.UL.Accept.Num

Number of Times the Uplink EVQI of


AMR-WB Services Is ACCEPT

VS.EVQI.AMRWB.UL.Poor.Num

Number of Times the Uplink EVQI of


AMR-WB Services Is POOR

VS.EVQI.AMRWB.UL.Bad.Num

Number of Times the Uplink EVQI of


AMR-WB Services Is BAD

VS.EVQI.AMRWB.DL.Excellent.Num

Number of Times the Downlink EVQI of


AMR-WB Services Is EXCELLENT

VS.EVQI.AMRWB.DL.Good.Num

Number of Times the Downlink EVQI of


AMR-WB Services Is GOOD

VS.EVQI.AMRWB.DL.Accept.Num

Number of Times the Downlink EVQI of


AMR-WB Services Is ACCEPT

VS.EVQI.AMRWB.DL.Poor.Num

Number of Times the Downlink EVQI of


AMR-WB Services Is POOR

VS.EVQI.AMRWB.DL.Bad.Num

Number of Times the Downlink EVQI of


AMR-WB Services Is BAD

10.1.6 Parameter Optimization


None

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

42

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

10.1.7 Troubleshooting
None

10.2 WRFD-011600 TFO/TrFO


10.2.1 When to Use This Feature
The TFO/TrFO feature reduces the number of speech coding/decoding on the CN side,
thereby improving the end-to-end speech quality.
The TFO/TrFO feature can improve the speech quality of both AMR-NB and AMR-WB
services.

10.2.2 Information to Be Collected


None

10.2.3 Network Planning


None

10.2.4 Feature Deployment


Requirements
Related Features
For details, see section 8.2 WRFD-011600 TFO/TrFO

Hardware
None

License
Feature ID

Feature
Name

License
Control Item

NE

Sales Unit

WRFD-011600

TFO/TrFO

TFO/TrFO

BSC6900
BSC6910

per Erl

Other Requirements
None

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

43

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Data Preparation
Parameter Name

Parameter ID

Setting
Description

Source

CS Algorithm
Switch

CsSwitch

The
CS_IUUP_V2_SUP
PORT_SWITCH
check box is
selected.

Radio planning

Activation
Using MML Commands
Run the RNC MML command SET UCORRMALGOSWITCH to turn on the IuUP V2
switch to support TFO/TrFO. In this step, select the CS_IUUP_V2_SUPPORT_SWITCH
check box under the CS Algorithm Switch parameter.

MML Command Examples


//Activation procedure
SET UCORRMALGOSWITCH: CsSwitch=CS_IUUP_V2_SUPPORT_SWITCH-1;

Using the CME


When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

1.

Configure a single object on the CME.


Set parameters on the CME according to the operation sequence in Table below. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.

2.

(Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click


on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 on the wizard interface to obtain online help.
Table 10-2 Configuring the parameters on the CME
SN

MO

NE

Parameter
Name

Parameter
ID

Configura
ble
in
CME Batch
Modificati
on
Center

UCORRM
ALGOSWI

RNC

CS
Algorithm

CsSwitch

Yes

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

44

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

TCH

Parameter
Name

Parameter
ID

Configura
ble
in
CME Batch
Modificati
on
Center

Switch
Set this
parameter to
CS_IUUP_
V2_SUPPO
RT_SWITC
H-1

Activation Observation
For details, see section 10.2.5 Performance Monitoring

Deactivation
Using MML Commands
Run the RNC MML command SET UCORRMALGOSWITCH to turn off the IuUP V2
switch. In this step, deselect the CS_IUUP_V2_SUPPORT_SWITCH check box under the
CS Algorithm Switch parameter.

MML Command Examples


//Deactivation procedure
SET UCORRMALGOSWITCH: CsSwitch=CS_IUUP_V2_SUPPORT_SWITCH-0;

Using the CME


When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

1.

Configure a single object on the CME.


Set parameters on the CME according to the operation sequence in Table below. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.

2.

(Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click


on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 on the wizard interface to obtain online help.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

45

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Table 10-3 Configuring the parameters on the CME


SN

MO

NE

Parameter
Name

Parameter
ID

Configura
ble
in
CME Batch
Modificati
on
Center

UCORRM
ALGOSWI
TCH

RNC

CS
Algorithm
Switch

CsSwitch

Yes

Set this
parameter to
CS_IUUP_
V2_SUPPO
RT_SWITC
H-0

10.2.5 Performance Monitoring


When the TFO/TrFO feature is enabled, only the CN knows whether coding and decoding are
implemented on the CN side. You can determine whether the TFO/TrFO is used based on the
gains in the MOS. For example, you can compare the MOS before and after the TFO/TrFO is
enabled.
The MOS is affected by instruments, voice samples, and evaluation standards (such as P.862/P.863).
Therefore, ensure that the same instruments, voice samples, and evaluation standards are used before
and after the TFO/TrFO feature is enabled.

10.2.6 Parameter Optimization


None

10.2.7 Troubleshooting
None

10.3 WRFD-020701 AMR/WB-AMR Speech Rates Control


10.3.1 When to Use This Feature
It is recommended that this feature be enabled in the following scenarios:

The TFO/TrFO feature has been enabled.

The WRFD-010613 AMR-WB (Adaptive Multi Rate Wide Band) feature has been
enabled and AMR-WB services use the 23.85 kbit/s rate.

The system load is heavy.

The network coverage is insufficient.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

46

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

10.3.2 Information to Be Collected


None

10.3.3 Network Planning


None

10.3.4 Feature Deployment


Requirements
Related Features
None

Hardware
None

License
Feature
ID

Feature
Name

License
Control Item

NE

Sales

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

AMR voice
coding rate
control

BSC6900
BSC6910

per Erl

Unit

Other Requirements
Multiple rates must be configured on the CN side to support rate adjustment.

Data Preparation
Parameter Name

Parameter ID

Setting
Description

Source

CS Algorithm
Switch

CsSwitch(BSC6900,
BSC6910)

Under this
parameter, select the
CS_AMRC_SWIT
CH check box, and
deselect the
CS_AMRC_NB_C
MP_SWITCH and
CS_AMRC_WB_C
MP_SWITCH
check boxes.

Default
/Recommended
value

QoS Switch for


AMR Traffic

AMRQosPerform(B
SC6900,BSC6910)

It is recommended
that this switch be

Radio planning

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

47

WCDMA RAN
AMR Feature Parameter Description

Parameter Name

10 Engineering Guidelines

Parameter ID

Setting
Description

Source

set to on if you want


to enable the AMRC
based on link
stability function.
Adjustment Switch
for AMR Uplink
Rate

UlQosAmrAdjSwitc
h(BSC6900,BSC69
10)

It is recommended
that this switch be
set to on if you want
to enable the AMRC
based on link
stability function.

Radio planning

Switch of AMR
Downlink Rate
Adjustment

DlQosAmrAdjSwitc
h(BSC6900,BSC69
10)

It is recommended
that this switch be
set to on if you want
to enable the AMRC
based on link
stability function.

Radio planning

Switch of WAMR
Uplink Rate
Adjustment

UlQosWAmrAdjSwi
tch(BSC6900,BSC6
910)

It is recommended
that this switch be
set to on if you want
to enable the AMRC
based on link
stability function.

Radio planning

Switch for WAMR


Downlink Rate

DlQosWAmrAdjSwi
tch(BSC6900,BSC6
910)

It is recommended
that this switch be
set to on if you want
to enable the AMRC
based on link
stability function.

Radio planning

Switch for Cell Load


Control

NBMLdcAlgoSwitc
h(BSC6900,BSC69
10)

It is recommended
that this switch be
set to on if you want
to enable the AMRC
based on LDR
function.

Radio planning

Activation
Using MML Commands
Setting parameters of the AMRC function
1.

To enable the AMRC function, perform the following steps.


a.

Issue 01 (2014-04-30)

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


select the CS_AMRC_SWITCH check box under the CsSwitch parameter. This
enables the AMRC function.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

48

WCDMA RAN
AMR Feature Parameter Description

2.

10 Engineering Guidelines

b.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


deselect the CS_AMRC_NB_CMP_SWITCH check box under the CsSwitch
parameter. This enables rate adjustment for AMR-NB services.

c.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


deselect the CS_AMRC_WB_CMP_SWITCH check box under the CsSwitch
parameter. This enables rate adjustment for AMR-WB services.

The AMRC based on LDR function needs to be enabled in the uplink and downlink
separately. To enable this function, perform the following steps.
a.

Run the RNC MML command MOD UCELLALGOSWITCH. In this step, select
the UL_UU_LDR and DL_UU_LDR check boxes under the NBMLdcAlgoSwitch
parameter. This enables the LDR algorithm.

b.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


select the CS_AMR_SF_RECONF_SWITCH check box under the CsSwitch
parameter. This enables code reallocation for AMR-WB services in the downlink.

c.

Run the RNC MML command MOD UCELLLDR. In this step, set the
DlLdrFirstAction parameter to WAMRSfReconfiguration so that AMR-WB code
reallocation is one of LDR actions.

It is recommended that the priority of AMR-WB code reallocation only be lower than that of code tree
reshuffling. That is, when the DlLdrFirstAction parameter is set to CODEADJ, set the
DlLdrSecondAction parameter to WAMRSfReconfiguration. When the DlLdrFirstAction parameter is
set to a value other than CODEADJ, lower the priorities of all configured actions by one in sequence
and reset the DlLdrFirstAction parameter to WAMRSfReconfiguration.

d.

Run the RNC MML command MOD UCELLLDR. In this step, set the
DlLdrFirstAction or UlLdrFirstAction parameter to AMRRateRed so that AMRC
is one of the actions for LDR.

If LDR actions have been specified in the live network, set the last LDR action to AMRC.

3.

4.

Issue 01 (2014-04-30)

The AMRC based on link stability function needs to be enabled based on data
transmission direction (uplink or downlink) and service type (AMR-WB or AMR-NB).
To enable this function, perform the following steps.
a.

Run the RNC MML command SET UQOSACT. In this step, set the
AMRQosPerform parameter to YES so that the QoS control algorithm is enabled
for AMR services.

b.

Run the RNC MML command SET UQOSACT. In this step, set the
UlQosAmrAdjSwitch or DlQosAmrAdjSwitch parameter to YES so that the AMRC
based on link stability function is enabled for AMR-NB services in the uplink or
downlink.

c.

Run the RNC MML command SET UQOSACT. In this step, set the
UlQosWAmrAdjSwitch or DlQosWAmrAdjSwitch parameter to YES so that the
AMRC based on link stability function is enabled for AMR-WB services in the
uplink or downlink.

To enable the AMRC function for combined services, perform the following steps.
a.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


select the CS_COMB_NAMRC_SWITCH check box under the CsSwitch
parameter so that the rate of AMR-NB services can be adjusted in combined service
scenarios.

b.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


select the CS_COMB_WAMRC_SWITCH check box under the CsSwitch
parameter so that the rate of AMR-WB services can be adjusted in combined service
scenarios.
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.

49

WCDMA RAN
AMR Feature Parameter Description

5.

10 Engineering Guidelines

To enable the RNC to adjust the rate of AMR services in gradual mode, perform the
following steps.
a.

Run the RNC MML command SET UCORRMALGOSWITCH. In this step,


select the CS_AMRC_WB_RATE_ADJUST_GRADUALLY_SWITCH check
box under the CsSwitch parameter. This enables the RNC to adjust the rates of
AMR-WB services in gradual mode.

b.

Run the RNC MML command SET UCORRMPARA. In this step, select the
PERFENH_NB_AMRC_UL_RATESET_EXT_SWITCH check box under the
PerfEnhanceSwitch3parameter. This enables the RNC to adjust the rates of
AMR-NB services in gradual mode.

c.

Run the RNC MML command SET UALGORSVPARA. In this step, select the
RESERVED_SWITCH_9_BIT12 check box under the RsvSwitch9 parameter so
that the RNC adjusts the rate immediately after receiving a Relocation Detect
message. If this check box is not selected, the RNC does not adjust the rate
immediately after receiving a Relocation Detect message.

d.

Run the RNC MML command SET UALGORSVPARA. In this step, select the
RESERVED_SWITCH_9_BIT11 check box under the RsvSwitch9 parameter so
that the RNC handles only the last message among the multiple rate adjustment
messages received from the CN. When this check box is not selected, the RNC
handles only the first message among the multiple rate adjustment messages
received from the CN.

e.

(Optional) Run the RNC MML command SET UCORRMPARA. In this step,
select the PERFENH_AMRC_NACK_SWITCH check box under the
PerfEnhanceSwitch3 parameter. When this check box is selected, the RNC returns
a NACK message if it receives a rate adjustment request from the CN and cannot
perform rate adjustment. When this check box is not selected, the RNC does not
send a NACK message in the preceding scenario.

Setting timers for AMRC response


1.

For AMR-NB services, run the RNC MML command SET UAMRC. In this step, set the
UlModeChangeTimerLen parameter to 200 and the DlModeChangeTimerLen
parameter to 5000.

2.

For AMR-WB services, run the RNC MML command SET UAMRCWB. In this step,
set the UlModeChangeTimerLen parameter to 200 and the DlModeChangeTimerLen
parameter to 5000.

Setting parameters of the AMRC based on link stability function


1.

Issue 01 (2014-04-30)

To set the event thresholds for the AMRC based on link stability function, perform the
following steps:
a.

For AMR-NB services, run the RNC MML command MOD


UTYPRABQUALITYMEAS. In this step, set RabIndex to 0, ULTHD6A1 to 2,
ULTHD6B1 to 2, ULTHD6A2 to 8, and ULTHD6B2 to 8.

b.

For AMR-NB services, run the RNC MML command SET UAMRC. In this step,
set DLTHDE1 to 20, DLTHDE2 to 20, DLTHDF1 to 90, and DLTHDF2 to 90.

c.

For AMR-WB services, run the RNC MML command MOD


UTYPRABQUALITYMEAS. In this step, set RabIndex to 1, ULTHD6A1 to 2,
ULTHD6B1 to 2, ULTHD6A2 to 8, and ULTHD6B2 to 8.

d.

For AMR-WB services, run the RNC MML command SET UAMRCWB. In this
step, set DLTHDE1 to 20, DLTHDE2 to 20, DLTHDF1 to 90, and DLTHDF2 to
90.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

50

WCDMA RAN
AMR Feature Parameter Description

2.

10 Engineering Guidelines

To set timers for the AMRC based on link stability function, perform the following steps.
a.

For AMR-NB services, run the RNC MML command SET UQOSACT. In this step,
set the AMRQosPerform parameter to YES and the AmrUlRateAdjTimerLen
parameter to 3000.

b.

For AMR-WB services, run the RNC MML command SET UQOSACT. In this
step, set the AMRQosPerform parameter to YES and the
WAmrUlRateAdjTimerLen parameter to 3000.

MML Command Examples


//Activating the AMRC function and enabling the rates of AMR-WB services t be adjusted
in gradual mode
SET UCORRMALGOSWITCH:
CsSwitch=CS_AMRC_SWITCH-1&CS_AMRC_WB_CMP_SWITCH-1&CS_AMRC_NB_CMP_SWITCH-1&CS_AMRC_
WB_RATE_ADJUST_GRADUALLY_SWITCH-1;
//Enabling the AMRC based on LDR function and enabling AMR-WB code reallocation
MOD UCELLALGOSWITCH: CellId=XX, NBMLdcAlgoSwitch=UL_UU_LDR-1&DL_UU_LDR-1;
SET UCORRMALGOSWITCH: CsSwitch=CS_AMR_SF_RECONF_SWITCH-1;
MOD UCELLLDR: CellId=xx, DlLdrFirstAction=AMRRateRed;
MOD UCELLLDR: CellId=xx,
DlLdrFirstAction=WAMRSfReconfiguration,DlLdrSecondAction=AMRRateRed;
//Enabling the AMRC based on link stability function and setting the timers for this
function
SET UQOSACT: AMRQosPerform=YES, UlQosAmrAdjSwitch=YES, AmrUlRateAdjTimerLen=3000,
UlQosWAmrAdjSwitch=YES, WAmrUlRateAdjTimerLen=3000, DlQosAmrAdjSwitch=YES,
DlQosWAmrAdjSwitch=YES;
//Enabling the AMRC function for combined services
SET UCORRMALGOSWITCH:CsSwitch= CS_COMB_NAMRC_SWITCH-1&CS_COMB_WAMRC_SWITCH-1;
//Enabling the RNC to adjust the rate immediately after receiving the Relocation Detect
message, and enabling the RNC to handle only the last message when receiving multiple
rate adjustment messages from the CN
SET UALGORSVPARA:RsvSwitch9=RESERVED_SWITCH_9_BIT11-1&RESERVED_SWITCH_9_BIT12-1;
//Enabling the RNC to send a NACK message and to adjust rates of AMR-NB services in
gradual mode
SET UCORRMPARA:
PerfEnhanceSwitch3=PERFENH_AMRC_NACK_SWITCH-1&PERFENH_NB_AMRC_UL_RATESET_EXT_SWITC
H-1;
//Setting event thresholds for the AMRC based on link stability function and timers
for AMRC response
MOD UTYPRABQUALITYMEAS: RabIndex=0, UlThd6A1=2, UlThd6A2=8, UlThd6B1=2, UlThd6B2=8;
MOD UTYPRABQUALITYMEAS: RabIndex=1, UlThd6A1=2, UlThd6A2=8, UlThd6B1=2, UlThd6B2=8;
SET UAMRC: DlThdE1=20, DlThdE2=20, DlThdF1=90, DlThdF2=90, UlModeChangeTimerLen=200,
DlModeChangeTimerLen=5000;
SET UAMRCWB: DlThdE1=20, DlThdE2=20, DlThdF1=90, DlThdF2=90, UlModeChangeTimerLen=200,
DlModeChangeTimerLen=5000;

Using the CME


When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

51

WCDMA RAN
AMR Feature Parameter Description

1.

10 Engineering Guidelines

Configure a single object on the CME.


Set parameters on the CME according to the operation sequence in following table. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.

2.

(Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click


on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 on the wizard interface to obtain online help.
Table 10-4 Configuring the parameters on the CME
SN

MO

NE

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

UCORRMA
LGOSWITC
H

RNC

CS
Algorithm
Switch

CsSwitch

Yes

NBMLdcAl
goSwitch

Yes

CsSwitch

Yes

(Set this
parameter to
CS_AMRC_
SWITCH-1
&CS_AMR
C_WB_CM
P_SWITCH1&CS_AM
RC_NB_C
MP_SWITC
H-1&CS_A
MRC_WB_
RATE_ADJ
UST_GRAD
UALLY_S
WITCH-1.)
2

UCELLAL
GOSWITC
H

RNC

Switch for
Cell Load
Control
(Set this
parameter to
UL_UU_LD
R-1&DL_U
U_LDR-1.)

3
Enable the
function of
AMR-WB
code
reallocation.

Issue 01 (2014-04-30)

UCORRMA
LGOSWITC
H

RNC

CS
Algorithm
Switch
(Set this
parameter to
CS_AMR_S
F_RECONF

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

52

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

DlLdrFirstA
ction

Yes

DlLdrSecon
dAction

Yes

AMRQosPer
form

Yes

_SWITCH-1
)
4

UCELLLDR

RNC

DL LDR
first action
(Set this
parameter to
CS_AMR_S
F_RECONF
_SWITCH.)
DL LDR
second
action
(Set this
parameter to
AMRRateRe
d.)

UQOSACT

RNC

QoS Switch
for AMR
Traffic
(Set this
parameter to
YES.)
Adjustment
Switch for
AMR
Uplink Rate

UlQosAmrA
djSwitch

(Set this
parameter to
YES.)
Switch of
WAMR
Uplink Rate
Adjustment

UlQosWAm
rAdjSwitch

(Set this
parameter to
YES.)
Switch of
AMR
Downlink
Rate
Adjustment

DlQosAmrA
djSwitch

(Set this
parameter to

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

53

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

YES.)
Switch for
WAMR
Downlink
Rate

DlQosWAm
rAdjSwitch

(Set this
parameter to
YES.)
Wait Timer
for AMR
Uplink Rate

AmrUlRate
AdjTimerLe
n

(Set this
parameter to
3000.)
Wait Timer
for WAMR
Uplink

WAmrUlRat
eAdjTimerL
en

(Set this
parameter to
3000.)
6

UCORRMP
ARA

RNC

Performance
Enhancemen
t Switch 3

PerfEnhance
Switch3

Yes

(Set
PERFENH_
AMRC_NA
CK_SWITC
H under this
parameter to
1.)
Performance
Enhancemen
t Switch 3

PerfEnhance
Switch3

(Set
PERFENH_
NB_AMRC
_UL_RATE
SET_EXT_
SWITCH
under this
parameter to
1.)
7

Issue 01 (2014-04-30)

UALGORS

RNC

Reserved

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

RsvSwitch9

Yes

54

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

VPARA

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

CsSwitch

Yes

RabIndex

Yes

Switch 9
(Set both
RESERVED
_SWITCH_
9_BIT11
and
RESERVED
_SWITCH_
9_BIT12
under this
parameter to
1.)

8
NOTE
Enable the
AMRC
function for
combined
services.

9
NOTE
Set
parameters
of the
AMRC
based on
link stability
function for
AMR
services.

Issue 01 (2014-04-30)

UCORRMA
LGOSWITC
H

RNC

CS
Algorithm
Switch
(Set this
parameter
to:
CS_COMB_
NAMRC_S
WITCH-1&
CS_COMB_
WAMRC_S
WITCH-1)

UTYPRAB
QUALITY
MEAS

RNC

Service
parameter
index
(Set this
parameter to
0 for
AMR-NB
services and
to 1 for
AMR-WB
services.)
Uplink
Event 6A1
Relative
Threshold

UlThd6A1

Uplink
Event 6A2
Relative
Threshold

UlThd6A2

Uplink

UlThd6B1

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

55

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

Event 6B1
Relative
Threshold

8
NOTE
Set
parameters
of the
AMRC
based on
link stability
function for
AMR-NB
services

UAMRC

RNC

Uplink
Event 6B2
Relative
Threshold

UlThd6B2

DL E1
Event
Relative
Threshold

DlThdE1

Yes

(Set this
parameter to
20.)
DL E2
Event
Relative
Threshold

DlThdE2

(Set this
parameter to
20.)
DL F1 Event
Relative
Threshold

DlThdF1

(Set this
parameter to
90.)
DL F2 Event
Relative
Threshold

DlThdF2

(Set this
parameter to
90.)
UL Mode
Change
Timer
Length

UlModeCha
ngeTimerLe
n

(Set this
parameter to
200.)
DL Mode
Change

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

DlModeCha
ngeTimerLe

56

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

Parameter
Name

Parameter
ID

Waiting
Timer
Length

Configura
ble in CME
Batch
Modificati
on Center

(Set this
parameter to
5000.)
9
NOTE
Set
parameters
of the
AMRC
based on
link stability
function for
AMR-WB
services

UAMRCW
B

RNC

DL E1
Event
Relative
Threshold

DlThdE1

(Set this
parameter to
20.)
DL E2
Event
Relative
Threshold

DlThdE2

(Set this
parameter to
20.)
DL F1 Event
Relative
Threshold

DlThdF1

(Set this
parameter to
90.)
DL F2 Event
Relative
Threshold

DlThdF2

(Set this
parameter to
90.)
UL Mode
Change
Timer
Length

UlModeCha
ngeTimerLe
n

(Set this
parameter to
200.)
DL Mode
Change
Waiting
Timer

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

DlModeCha
ngeTimerLe
n

57

WCDMA RAN
AMR Feature Parameter Description

SN

10 Engineering Guidelines

MO

NE

Parameter
Name

Parameter
ID

Configura
ble in CME
Batch
Modificati
on Center

Length
(Set this
parameter to
5000.)

Activation Observation
1.

On the RNC LMT, open the Monitor tab page. In the navigation tree, choose Monitor >
UMTS Monitoring and double-click Connection Performance Monitoring. In the
displayed dialog box, set Monitor Item to AMR Mode and specify IMSI.

2.

On the RNC LMT, open the Trace tab page. In the navigation tree, choose Trace >
UMTS Services and double-click Uu Interface Trace. In the displayed dialog box,
specify the RNC ID and cell ID, as shown in Figure below.
Figure 10-3 Uu interface tracing

3.

Make available two UEs that support AMR-WB: UE 1 and UE 2. Make the UEs camp
on CELL_A11. Use UE 1 to call UE 2 to verify that calls are being successfully
established.

4.

Check whether the traced RRC_MEAS_CTRL message contains the information


elements (IEs) event6a and event6b, as shown in Figure below.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

58

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Figure 10-4 IEs contained in RRC_MEAS_CTRL

5.

Place UE 2 in the cell center, and move UE 1 towards or away from UE 2. Check
whether the AMR mode changes during performance monitoring, as shown in Figure
below.

Figure 10-5 AMR mode

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

59

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Deactivation
Using MML Commands
Run the RNC MML command SET UCORRMALGOSWITCH. In this step, deselect the
CS_AMRC_SWITCH check box under the CS Algorithm Switch parameter.

MML Command Examples


//Deactivating AMR/WB-AMR Speech Rates Control
SET UCORRMALGOSWITCH: CsSwitch=CS_AMRC_SWITCH-0;

Using the CME


When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.

1.

Configure a single object on the CME.


Set parameters on the CME according to the operation sequence in Table below. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.

2.

(Optional) Modify objects in batches on the CME. (CME batch modification center)

To modify objects in batches, click


on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 on the wizard interface to obtain online help.
Table 10-5 Configuring the parameters on the CME
SN

MO

NE

Parameter
Name

Parameter
ID

Configura
ble
in
CME Batch
Modificati
on
Center

UCORRM
ALGOSWI
TCH

RNC

CS
Algorithm
Switch

CsSwitch

Yes

Set this
parameter to
CS_AMRC_
SWITCH -0

10.3.5 Performance Monitoring


1.

Issue 01 (2014-04-30)

Monitor the values of the following counters to determine the number of times the rates
of AMR services are adjusted.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

60

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Counter Name

Description

VS.AMR.UL.RateUp

Number of UL Rate Increases for AMR


Services for Cell

VS.AMR.UL.RateDown

Number of UL Rate Decreases for AMR


Services for Cell

VS.AMRWB.ULRateUp

Number of Increases of UL Rate for AMR


WB Speech Service

VS.AMRWB.ULRateDown

Number of Decreases of UL Rate for AMR


WB Speech Service

2.

Monitor the values of the following counters to determine the proportion of AMR
services at different rates.

Counter Name

Description

VS.RB.AMR.DL.12.2

Number of AMR Users with DL rate of 12.2


Kbit/s for Cell

VS.RB.AMR.DL.10.2

Number of AMR Users with DL rate of 10.2


Kbit/s for Cell

VS.RB.AMR.DL.7.95

Number of AMR Users with DL rate of 7.95


Kbit/s for Cell

VS.RB.AMR.DL.7.4

Number of AMR Users with DL rate of 7.4


Kbit/s for Cell

VS.RB.AMR.DL.6.7

Number of AMR Users with DL rate of 6.7


Kbit/s for Cell

VS.RB.AMR.DL.5.9

Number of AMR Users with DL rate of 5.9


Kbit/s for Cell

VS.RB.AMR.DL.5.15

Number of AMR Users with DL rate of 5.15


Kbit/s for Cell

VS.RB.AMR.DL.4.75

Number of AMR Users with DL rate of 4.75


Kbit/s for Cell

VS.RB.AMR.UL.12.2

Number of AMR Users with UL rate of 12.2


Kbit/s for Cell

VS.RB.AMR.UL.10.2

Number of AMR Users with UL rate of 10.2


Kbit/s for Cell

VS.RB.AMR.UL.7.95

Number of AMR Users with UL rate of 7.95


Kbit/s for Cell

VS.RB.AMR.UL.7.4

Number of AMR Users with UL rate of 7.4


Kbit/s for Cell

VS.RB.AMR.UL.6.7

Number of AMR Users with UL rate of 6.7


Kbit/s for Cell

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

61

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Counter Name

Description

VS.RB.AMR.UL.5.9

Number of AMR Users with UL rate of 5.9


Kbit/s for Cell

VS.RB.AMR.UL.5.15

Number of AMR Users with UL rate of 5.15


Kbit/s for Cell

VS.RB.AMR.UL.4.75

Number of AMR Users with UL rate of 4.75


Kbit/s for Cell

VS.RB.AMRWB.DL.23.85

Number of UEs that use the CS AMR WB


speech service at the DL bit rate of 23.85
kbit/s in the cell

VS.RB.AMRWB.DL.15.85

Number of UEs that use the CS AMR WB


speech service at the DL bit rate of 15.85
kbit/s in the cell

VS.RB.AMRWB.DL.12.65

Number of UEs that use the CS AMR WB


speech service at the DL bit rate of 12.65
kbit/s in the cell

VS.RB.AMRWB.DL.8.85

Number of UEs that use the CS AMR WB


speech service at the DL bit rate of 8.85
kbit/s in the cell

VS.RB.AMRWB.DL.6.60

Number of UEs that use the CS AMR WB


speech service at the DL bit rate of 6.60
kbit/s in the cell

VS.RB.AMRWB.UL.23.85

Number of UEs that use the CS AMR WB


speech service at the UL bit rate of 23.85
kbit/s in the cell

VS.RB.AMRWB.UL.15.85

Number of UEs that use the CS AMR WB


speech service at the UL bit rate of 15.85
kbit/s in the cell

VS.RB.AMRWB.UL.12.65

Number of UEs that use the CS AMR WB


speech service at the UL bit rate of 12.65
kbit/s in the cell

VS.RB.AMRWB.UL.8.85

Number of UEs that use the CS AMR WB


speech service at the UL bit rate of 8.85
kbit/s in the cell

VS.RB.AMRWB.UL.6.60

Number of UEs that use the CS AMR WB


speech service at the UL bit rate of 6.60
kbit/s in the cell

10.3.6 Parameter Optimization


If some UEs do not support AMR adjustment, add these UEs to the AMRC blacklists.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

62

WCDMA RAN
AMR Feature Parameter Description

10 Engineering Guidelines

Run the following command to add UEs that do not support AMR adjustment to the AMRC blacklist:
ADD UIMEITAC: TAC_FUNC=Special_User_Enhance, TAC="xxxx", Description=""xxxx"",
SpecUserFunctionSwitch2=SPECUSER_AMR_RATE_CHG_SWITCH-1;

10.3.7 Troubleshooting
None

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

63

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

11

Parameters

Table 11-1 Parameter description


Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

CsSwitc
h

BSC690
0

SET
UCORR
MALG
OSWIT
CH

WRFD010613

WRFD011600

AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

WRFD020701

Emerge
ncy Call

Meaning: 1. CS_AMRC_SWITCH: When the switch


is on and the AMRC license is activated, the AMR
control function is enabled for AMR services. 2.
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH: When the switch is on, the default
configurations of signaling and RABs, which are
stipulated in 3GPP 25.331, are used for CS service
relocation of the UE from GSM or LTE to WCDMA.
When the switch is not on, the default configurations
are not used. Instead, the complete information of RB,
TrCH, and PhyCH, which are in the HANDOVER TO
UTRAN COMMAND message is used. 3.
CS_IUUP_V2_SUPPORT_SWITCH: When the
switch is on and the "TFOTRFO(TFO/TrFO)" license
is activated, the RNC supports the TFO/TRFO
function. 4.
CS_VOICE_DYN_CH_CONF_SWITCH: Whether to
support the dynamic CS voice channel allocation
function. 5. CS_AMRC_WB_CMP_SWITCH: When
this switch is turned on, wideband AMRC
compatibility issues exist and therefore the service
data rate must not be adjusted. When this switch is
turned off, such issues do not exist and therefore the
service data rate can be adjusted. 6.
CS_AMRC_NB_CMP_SWITCH: When this switch is
turned on, narrowband AMRC compatibility issues
exist and therefore the service data rate must not be
adjusted. When this switch is turned off, such issues
do not exist and therefore the service data rate can be
adjusted. 7.
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH: Whether wideband AMRC can be adjusted
level by level according to the data rate sets
configured by the CN .When this switch is turned off,

WRFD021104

TFO/Tr
FO
AMR/W
B-AMR
Speech
Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

64

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

wideband AMRC cannot be adjusted level by level.


When this switch is turned on, wideband AMRC can
be adjusted level by level. 8.
CS_WAMR_SF_RECONF_SWITCH: Whether the
rate of an AMR-WB service is lowered through RB
reconfiguration upon code resource congestion. When
this switch is turned on, the rate of an AMR-WB
service is lowered through RB reconfiguration, and
the spreading factor (SF) of the AMR-WB service is
reconfigured, when code resource is congested and
code resources can be saved by RB reconfiguration.
When this switch is turned off, the rate of the
AMR-WB service is not lowered through RB
reconfiguration upon code congestion. 9.
CS_COMB_WAMRC_SWITCH: Whether the
adaptive multi rate control (AMRC) function is
enabled for an AMR-WB service in combined
services. When this switch and CS_AMRC_SWITCH
are turned on, and CS_AMRC_WB_CMP_SWITCH
is turned off, the AMRC function is enabled for the
AMR-WB service in combined services. When this
switch is turned off, the AMRC function is disabled
for the AMR-WB service in combined services. 10.
CS_COMB_NAMRC_SWITCH: Whether the AMRC
function is enabled for an AMR-NB service in
combined services. When this switch and
CS_AMRC_SWITCH are turned on, and
CS_AMRC_NB_CMP_SWITCH is turned off, the
AMRC function is enabled for the AMR-NB service
in combined services. When this switch is turned off,
the AMRC function is disabled for the AMR-NB
service in combined services. 11.
CS_LDR_AMR_RATEUP_OPT_SWITCH: Whether
to increase the uplink and downlink rates of AMR
services when radio resources of the cell are
congested. When this switch is turned on, the RNC
can increase the uplink and downlink rates of AMR
services when radio resources (except power
resources) of the cell are congested. If power
resources are congested, the RNC cannot increase the
rates. When this switch is turned off, the RNC cannot
increase the rates when any type of resources is
congested. 12. CS_AMR_TRFO_CMP_SWITCH:
Compatibility switch for uplink AMR service rate
increase requests. This switch applies to the following
scenario: 1) The TrFO or TFO function is enabled. 2)
The peer RNC adjusts the downlink rate of an AMR
service, and therefore the CN sends the local RNC an
uplink rate increase request for the AMR service. 3)
The local RNC cannot increase the uplink rate for the
AMR service. In this scenario: 1) If this switch is

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

65

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

turned on, the local RNC sends the CN a message,


which indicates that the uplink rate increase succeeds.
2) If this switch is turned off, the local RNC sends the
CN a message, which indicates that the uplink rate
increase fails. 13.
CS_COMB_AMRC_POWERLDR_SWITCH:
Whether to adjust the uplink and downlink rates of the
NB-AMR or WB-AMR service in combined services
using the AMRC function when power resources of a
cell are congested. When this switch is turned on, the
RNC can do so. When this switch is turned off, the
RNC cannot do so. 14.
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H: When the RNC starts immediate rate adjustment
for relocation of a UE processing AMR services. If
this switch is turned on. The RNC starts immediate
rate adjustment for AMR services after Relocation
Detect. If this switch is turned off. The RNC starts
immediate rate adjustment for AMR services after the
UE relocation is completed. 15.
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
: Whether the optimization solution to processing
frequent rate control procedures takes effect. If this
switch is turned on, the optimization solution takes
effect, if the RNC receives a new uplink rate control
frame in AMR services before the current Iu UP rate
control procedure is terminated, the RNC terminates
the current procedure immediately and adjusts the
uplink AMR service rate according to the latest frame.
If this switch is turned off, the optimization solution
does not take effect, if the RNC receives a new uplink
rate control frame in AMR services before the current
Iu UP rate control procedure is terminated, the RNC
continues the current Iu UP rate control procedure and
ignores the latest rate control frame. 16.
CS_RB_AMR_TFI_CMP_SWITCH: Whether the RB
setup, reconfiguration, and release messages for PS
services carry TFI information about AMR services in
CS+PS combined services when
CS_AMRC_SWITCH is set to on. If this switch is
turned on, the RB setup, reconfiguration, and release
messages for PS services carry TFI information about
AMR services in CS+PS combined services. If this
switch is turned off, the RB setup, reconfiguration,
and release messages for PS services do not carry TFI
information about AMR services in CS+PS combined
services.
GUI Value Range: CS_AMRC_SWITCH,
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH, CS_IUUP_V2_SUPPORT_SWITCH,
CS_VOICE_DYN_CH_CONF_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

66

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CS_AMRC_WB_CMP_SWITCH,
CS_AMRC_NB_CMP_SWITCH,
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH, CS_WAMR_SF_RECONF_SWITCH,
CS_COMB_WAMRC_SWITCH,
CS_COMB_NAMRC_SWITCH,
CS_LDR_AMR_RATEUP_OPT_SWITCH,
CS_AMR_TRFO_CMP_SWITCH,
CS_COMB_AMRC_POWERLDR_SWITCH,
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
, CS_RB_AMR_TFI_CMP_SWITCH
Unit: None
Actual Value Range: CS_AMRC_SWITCH,
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH, CS_IUUP_V2_SUPPORT_SWITCH,
CS_VOICE_DYN_CH_CONF_SWITCH,
CS_AMRC_WB_CMP_SWITCH,
CS_AMRC_NB_CMP_SWITCH,
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH, CS_WAMR_SF_RECONF_SWITCH,
CS_COMB_WAMRC_SWITCH,
CS_COMB_NAMRC_SWITCH,
CS_LDR_AMR_RATEUP_OPT_SWITCH,
CS_AMR_TRFO_CMP_SWITCH,
CS_COMB_AMRC_POWERLDR_SWITCH,
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
, CS_RB_AMR_TFI_CMP_SWITCH
Default Value:
CS_AMRC_SWITCH:0,CS_HANDOVER_TO_UTR
AN_DEFAULT_CFG_SWITCH:1,CS_IUUP_V2_SU
PPORT_SWITCH:0,CS_VOICE_DYN_CH_CONF_
SWITCH:0,CS_AMRC_WB_CMP_SWITCH:0,CS_
AMRC_NB_CMP_SWITCH:0,CS_AMRC_WB_RA
TE_ADJUST_GRADUALLY_SWITCH:0,CS_WAM
R_SF_RECONF_SWITCH:0,CS_COMB_WAMRC_
SWITCH:0,CS_COMB_NAMRC_SWITCH:0,CS_L
DR_AMR_RATEUP_OPT_SWITCH:0,CS_AMR_T
RFO_CMP_SWITCH:0,CS_COMB_AMRC_POWE
RLDR_SWITCH:0,CS_IMMEDIATE_RATE_CONT
ROL_OPT_SWITCH:0,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
:0, CS_RB_AMR_TFI_CMP_SWITCH:1
CsSwitc
h

BSC691
0

Issue 01 (2014-04-30)

SET
UCORR
MALG

WRFD010613
WRFD-

AMR-W
B
(Adaptiv

Meaning: 1. CS_AMRC_SWITCH: When the switch


is on and the AMRC license is activated, the AMR
control function is enabled for AMR services. 2.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

67

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

11 Parameters

MML
Comma
nd

Feature
ID

Feature
Name

Description

OSWIT
CH

021104

e Multi
Rate
Wide
Band)

CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH: When the switch is on, the default
configurations of signaling and RABs, which are
stipulated in 3GPP 25.331, are used for CS service
relocation of the UE from GSM or LTE to WCDMA.
When the switch is not on, the default configurations
are not used. Instead, the complete information of RB,
TrCH, and PhyCH, which are in the HANDOVER TO
UTRAN COMMAND message is used. 3.
CS_IUUP_V2_SUPPORT_SWITCH: When the
switch is on and the "TFOTRFO(TFO/TrFO)" license
is activated, the RNC supports the TFO/TRFO
function. 4.
CS_VOICE_DYN_CH_CONF_SWITCH: Whether to
support the dynamic CS voice channel allocation
function. 5. CS_AMRC_WB_CMP_SWITCH: When
this switch is turned on, wideband AMRC
compatibility issues exist and therefore the service
data rate must not be adjusted. When this switch is
turned off, such issues do not exist and therefore the
service data rate can be adjusted. 6.
CS_AMRC_NB_CMP_SWITCH: When this switch is
turned on, narrowband AMRC compatibility issues
exist and therefore the service data rate must not be
adjusted. When this switch is turned off, such issues
do not exist and therefore the service data rate can be
adjusted. 7.
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH: Whether wideband AMRC can be adjusted
level by level according to the data rate sets
configured by the CN .When this switch is turned off,
wideband AMRC cannot be adjusted level by level.
When this switch is turned on, wideband AMRC can
be adjusted level by level. 8.
CS_WAMR_SF_RECONF_SWITCH: Whether the
rate of an AMR-WB service is lowered through RB
reconfiguration upon code resource congestion. When
this switch is turned on, the rate of an AMR-WB
service is lowered through RB reconfiguration, and
the spreading factor (SF) of the AMR-WB service is
reconfigured, when code resource is congested and
code resources can be saved by RB reconfiguration.
When this switch is turned off, the rate of the
AMR-WB service is not lowered through RB
reconfiguration upon code congestion. 9.
CS_COMB_WAMRC_SWITCH: Whether the
adaptive multi rate control (AMRC) function is
enabled for an AMR-WB service in combined
services. When this switch and CS_AMRC_SWITCH
are turned on, and CS_AMRC_WB_CMP_SWITCH
is turned off, the AMRC function is enabled for the

WRFD011600
WRFD020701

Emerge
ncy Call
TFO/Tr
FO
AMR/W
B-AMR
Speech
Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

68

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

AMR-WB service in combined services. When this


switch is turned off, the AMRC function is disabled
for the AMR-WB service in combined services. 10.
CS_COMB_NAMRC_SWITCH: Whether the AMRC
function is enabled for an AMR-NB service in
combined services. When this switch and
CS_AMRC_SWITCH are turned on, and
CS_AMRC_NB_CMP_SWITCH is turned off, the
AMRC function is enabled for the AMR-NB service
in combined services. When this switch is turned off,
the AMRC function is disabled for the AMR-NB
service in combined services. 11.
CS_LDR_AMR_RATEUP_OPT_SWITCH: Whether
to increase the uplink and downlink rates of AMR
services when radio resources of the cell are
congested. When this switch is turned on, the RNC
can increase the uplink and downlink rates of AMR
services when radio resources (except power
resources) of the cell are congested. If power
resources are congested, the RNC cannot increase the
rates. When this switch is turned off, the RNC cannot
increase the rates when any type of resources is
congested. 12. CS_AMR_TRFO_CMP_SWITCH:
Compatibility switch for uplink AMR service rate
increase requests. This switch applies to the following
scenario: 1) The TrFO or TFO function is enabled. 2)
The peer RNC adjusts the downlink rate of an AMR
service, and therefore the CN sends the local RNC an
uplink rate increase request for the AMR service. 3)
The local RNC cannot increase the uplink rate for the
AMR service. In this scenario: 1) If this switch is
turned on, the local RNC sends the CN a message,
which indicates that the uplink rate increase succeeds.
2) If this switch is turned off, the local RNC sends the
CN a message, which indicates that the uplink rate
increase fails. 13.
CS_COMB_AMRC_POWERLDR_SWITCH:
Whether to adjust the uplink and downlink rates of the
NB-AMR or WB-AMR service in combined services
using the AMRC function when power resources of a
cell are congested. When this switch is turned on, the
RNC can do so. When this switch is turned off, the
RNC cannot do so. 14.
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H: When the RNC starts immediate rate adjustment
for relocation of a UE processing AMR services. If
this switch is turned on. The RNC starts immediate
rate adjustment for AMR services after Relocation
Detect. If this switch is turned off. The RNC starts
immediate rate adjustment for AMR services after the
UE relocation is completed. 15.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

69

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
: Whether the optimization solution to processing
frequent rate control procedures takes effect. If this
switch is turned on, the optimization solution takes
effect, if the RNC receives a new uplink rate control
frame in AMR services before the current Iu UP rate
control procedure is terminated, the RNC terminates
the current procedure immediately and adjusts the
uplink AMR service rate according to the latest frame.
If this switch is turned off, the optimization solution
does not take effect, if the RNC receives a new uplink
rate control frame in AMR services before the current
Iu UP rate control procedure is terminated, the RNC
continues the current Iu UP rate control procedure and
ignores the latest rate control frame. 16.
CS_RB_AMR_TFI_CMP_SWITCH: Whether the RB
setup, reconfiguration, and release messages for PS
services carry TFI information about AMR services in
CS+PS combined services when
CS_AMRC_SWITCH is set to on. If this switch is
turned on, the RB setup, reconfiguration, and release
messages for PS services carry TFI information about
AMR services in CS+PS combined services. If this
switch is turned off, the RB setup, reconfiguration,
and release messages for PS services do not carry TFI
information about AMR services in CS+PS combined
services.
GUI Value Range: CS_AMRC_SWITCH,
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH, CS_IUUP_V2_SUPPORT_SWITCH,
CS_VOICE_DYN_CH_CONF_SWITCH,
CS_AMRC_WB_CMP_SWITCH,
CS_AMRC_NB_CMP_SWITCH,
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH, CS_WAMR_SF_RECONF_SWITCH,
CS_COMB_WAMRC_SWITCH,
CS_COMB_NAMRC_SWITCH,
CS_LDR_AMR_RATEUP_OPT_SWITCH,
CS_AMR_TRFO_CMP_SWITCH,
CS_COMB_AMRC_POWERLDR_SWITCH,
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
, CS_RB_AMR_TFI_CMP_SWITCH
Unit: None
Actual Value Range: CS_AMRC_SWITCH,
CS_HANDOVER_TO_UTRAN_DEFAULT_CFG_S
WITCH, CS_IUUP_V2_SUPPORT_SWITCH,
CS_VOICE_DYN_CH_CONF_SWITCH,
CS_AMRC_WB_CMP_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

70

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CS_AMRC_NB_CMP_SWITCH,
CS_AMRC_WB_RATE_ADJUST_GRADUALLY_S
WITCH, CS_WAMR_SF_RECONF_SWITCH,
CS_COMB_WAMRC_SWITCH,
CS_COMB_NAMRC_SWITCH,
CS_LDR_AMR_RATEUP_OPT_SWITCH,
CS_AMR_TRFO_CMP_SWITCH,
CS_COMB_AMRC_POWERLDR_SWITCH,
CS_IMMEDIATE_RATE_CONTROL_OPT_SWITC
H,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
, CS_RB_AMR_TFI_CMP_SWITCH
Default Value:
CS_AMRC_SWITCH:0,CS_HANDOVER_TO_UTR
AN_DEFAULT_CFG_SWITCH:1,CS_IUUP_V2_SU
PPORT_SWITCH:0,CS_VOICE_DYN_CH_CONF_
SWITCH:0,CS_AMRC_WB_CMP_SWITCH:0,CS_
AMRC_NB_CMP_SWITCH:0,CS_AMRC_WB_RA
TE_ADJUST_GRADUALLY_SWITCH:0,CS_WAM
R_SF_RECONF_SWITCH:0,CS_COMB_WAMRC_
SWITCH:0,CS_COMB_NAMRC_SWITCH:0,CS_L
DR_AMR_RATEUP_OPT_SWITCH:0,CS_AMR_T
RFO_CMP_SWITCH:0,CS_COMB_AMRC_POWE
RLDR_SWITCH:0,CS_IMMEDIATE_RATE_CONT
ROL_OPT_SWITCH:0,
CS_TRFO_MUTI_UL_RATE_CONTROL_SWITCH
:0, CS_RB_AMR_TFI_CMP_SWITCH:1
Process
Switch

BSC690
0

SET
UDPUC
FGDAT
A

WRFD010510
WRFD010504
WRFD040100
WRFD010503
WRFD010502
WRFD020133
WRFD020132

Backgro
und QoS
Class

WRFD010501

Flow
Control

WRFD020123

Interacti
ve QoS
Class

WRFD010619

Issue 01 (2014-04-30)

3.4/6.8/1
3.6/27.2
Kbps
RRC
Connect
ion and
Radio
Access
Bearer
Establis
hment
and
Release

Streami

Meaning: 1)H2F_4B_SWITCH Whether to report the


event 4B measurement report. This parameter is used
to set the conditions for triggering event 4B reporting
during the H2F state transition. 0: The event 4B
measurement report is reported when both the
maximum traffic volume in the previous 10 ms and
the current traffic volume are smaller than the event
4B-triggering threshold. 1: The event 4B
measurement report is reported when the current
traffic volume is smaller than the event 4B-triggering
threshold. 2)RLC_SUFI_WINDOW_SWITCH
Whether to enable the RNC to handle RLC SUFI
WINDOW. For details about SUFI WINDOW, see the
3GPP TS 25.322. 0: This switch is turned off, and
the RNC does not handle RLC SUFI WINDOW. 1:
This switch is turned on, and the RNC handles RLC
SUFI WINDOW.
3)RLC_UM_HFN_INVALID_RRC_REL_SWITCH
Whether to enable the RLC in UM mode to send
Status Ind to the RRC. When the RLC in UM mode
adjusts the hyper frame number (HFN) quadruple or
more, the RLC sends Status Ind to the RRC and
instructs the RRC to release connections. 0: This

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

71

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

WRFD010301

ng QoS
Class

WRFD0106111
1

P2P
Downlo
ading
Rate
Control
during
Busy
Hour

switch is turned off. 1: This switch is turned on.


4)NO_CONG_RESUME_GUARANTEE_RATE_SW
ITCH Whether to enable the guaranteed bit rate
(GBR) protection and compensation function. When
overbooking congestion is cleared on the Iub interface
and the current UE rate is lower than the GBR, the
MAC-d improves the current UE rate to the GBR. 0:
This switch is turned off. 1: This switch is turned on.
5)TPE_ONLY_SPLIT_SWITCH Whether to enable
only the function of splitting acknowledged (ACK)
packets for the RLC TPE. When this switch is turned
on, the RLC TPE has only the function of splitting
ACK packets. 0: This switch is turned off. 1: This
switch is turned on. 6)DELAY_MSG_SWITCH
Whether to process delayed messages. When
configuration messages do not arrive on time due to
inter-board communication exceptions, the RLC,
MAC-d, and FP can process the messages received
within 1280 ms. 0: This switch is turned off. 1:
This switch is turned on.
7)RACH_SYNC_CHK_EFFECT_MODE_SWITCH
This parameter is used to set the effective way of
RNC synchronization detection function in the current
cell RACH channel. 0: The switch is turned off. When
RNC received the synchronous frame of the RACH
channel, the synchronization detection function of the
cell is effective immediately. 1: The switch is turned
on. When the cell is established, the synchronization
detection function of the cell is effective immediately.
8)UEA1_SOFT_ENCRYPT_SWITCH UEA1
software encrypted channel switches for BSC6910.
0: The switch is turned off, UEA1 uses logical
encryption. 1: The switch is turned on, UEA1 uses
software encryption.
9)IUUP_RC_REPEAT_SWITCH IuUP Rate
Control Repeat Switch Whether the RNC re-initiates
the IuUP rate control procedure after the CN fails to
adjust the downlink rate on the user plane. 0: When
the CN fails to adjust the downlink rate on the user
plane, the RNC does not re-initiate the IuUP rate
control procedure. 1: When the CN fails to adjust the
downlink rate on the user plane, the RNC re-initiates
the IuUP rate control procedure.
10)BIG_LITTLE_END_CONV_MSG_LEN_CHK_S
WITCH Check Message Length Upon Byte Order
Conversion Whether the RNC forcibly checks the
length of a message when the message is converted to
byte order. 0: The RNC does not check the length of a
message when the message is converted to byte order.
1: The RNC forcibly checks the length of a message
when the message is converted to byte order.

Web
browsin
g
accelerat
ion
Convers
ational
QoS
Class
TCP
Accelera
tor
CS
voice
over
HSPA/H
SPA+
Paging
UE in
Idle,
CELL_P
CH,
URA_P
CH
State
(Type 1)
HSDPA
State
Transiti
on

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

72

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

11)INTER_SUBRACK_MCAST_MSG_LEN_CHK_
SWITCH Whether the length of a inter-subrack
multicast message in an MBSC is checked, which
prevents the system exception caused by messages of
different lengths 1: This switch is set to on. A message
is processed only when its length is valid. 0: This
switch is set to off. A message is processed regardless
of whether its length is valid or not.
12)PS_DATA_TIME_DELAY_CTRL_SWITCH
Delay control switch for PS data transmission. The
delay control function discards packets once
congestion is detected, thereby reducing the delay and
improving the performance of delay-sensitive
services. 0: This switch is turned off. 1: This switch is
turned on.
13)SILENT_INJECT_NOISE_DBG_SWITCH
Whether the IuUP and FP noise injection function is
supported. The IuUP and FP noise injection function
is used to locate the problem of no audio. When a UE
tracing task is started for a UE performing voice
services, you can press any key on the terminal to start
noise injection. 0: The IuUP and FP noise injection
function is disabled. 1: The IuUP and FP noise
injection function is enabled.
14)VOICE_CIPHER_DBG_SWITCH Whether the
MAC-d hyper frame number (HFN) change function
is supported. The MAC-d HFN change function is
used to locate voice service encryption problems.
When a UE tracing task is started for a UE performing
voice services, you can press any key on the terminal
to change the MAC-d HFN of the UE. This change
affects the voice quality of the UE. 0: The MAC-d
HFN change function is disabled. 1: The MAC-d HFN
change function is enabled.
15)VQI_OPTIMIZATION_SWITCH Whether to
calculate the VQI measurement results of a call into
the current best cell in real time. 0: This switch is set
to off. The VQI measurement results of a call are
calculated into the corresponding VQI counters for the
best cell during call release. 1: This switch is set to on.
The VQI measurement results of a call are calculated
into the corresponding VQI counters for the current
best cell in real time.
16)DELAY_POLL_TIMER_SWITCH Whether to
increase the value of POLL TIMER. When the DSP
load is heavy, the RNC automatically prolongs the
POLL TIMER to reduce the times RLC status reports
are sent. 0: This switch is turned off. 1: This
switch is turned on.
17)OVERLOAD_AMR_DISCARD_SWITCH
Whether to trigger the AMR packet loss function

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

73

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

when the DSP is overloaded. When the DSP usage


exceeds the alarm threshold, AMR packet loss is
triggered. 0: This switch is turned off. 1: This switch
is turned on. 18)L2_RESOURCE_CHECK_SWITCH
Whether to enable the layer 2 (L2) instance resource
check function. L2 instance resources include RLC,
MAC-d, MAC-c, Fp, Mdc, and Iu User Plane (IuUP).
When the L2 instance resource check fails, the RRC
automatically releases the L2 instance resources. 0:
This switch is turned off. 1: This switch is turned on.
19)MACD_SCHEDULE_CHECK_SWITCH
Whether to enable the MAC-d scheduling check
function. When this switch is turned on, the RNC
checks MAC-d scheduling groups. The RNC provides
users with check information only when the MAC-d
scheduling groups are abnormal. 0: This switch is
turned off. 1: This switch is turned on.
20)SERVICE_APPERCEIVE_SWITCH Whether to
support the service awareness function. 0: This
switch is turned off, and the service awareness
function is supported. 1: This switch is turned on,
and the service awareness function is not supported.
21)IUUP_EMPTY_FRAME_DISCARD_SWITCH
Whether to enable the IuUP to discard null frames.
When this switch is turned on, the IuUP discards null
frames. 0: This switch is turned off. 1: This switch is
turned on. 22)PAGING_DETECT_SWITCH Whether
to enable the paging detection function on the
DPUb/DPUe board. Value 0 indicates that the paging
detection function is disabled. Value 1 indicates that
the paging detection function is enabled.
23)IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWI
TCH Whether the RNC performs compatibility
processing on the incorrect IPTI information element
(IE) contained in the IuUP initialization frame. This
switch takes effect only on AMR services when the
TrFO feature is validated. 1: This switch is turned
on, the RNC performs compatibility processing on the
incorrect IPTI IE contained in the IuUP initialization
frame. 0: This switch is turned off, the RNC does
not perform compatibility processing on the incorrect
IPTI IE contained in the IuUP initialization frame.
24)PSDATA_UTRAN_PAGING_PREEMPTED_SW
ITCH Whether the preemption algorithm takes effect
for the UTRAN paging triggered by downlink PS data
transmission. 1: This switch is turned on. When the
PCH is congested, the RNC preferentially sends CS
paging messages and holds back UTRAN paging
messages triggered by downlink PS data transmission
if "PagingSwitch" in the "SET UDPUCFGDATA" is
turned on, and the RNC preferentially sends short

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

74

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

message service (SMS) paging messages and holds


back UTRAN paging messages triggered by downlink
PS data transmission if "LowSignalPagingSwitch" in
the "SET UDPUCFGDATA" is turned on. 0: This
switch is turned off. The RNC does not preferentially
send CS paging or SMS paging messages.
25)KQI_SUBRACK_LOAD_CTRL_SWITCH
Whether flow control is implemented over the KQI
process when the link between subracks is congested.
1: When this switch is set to on, flow control is
implemented over the KQI process in the scenario
where the link between subracks is congested. 0:
When this switch is set to off, flow control is not
implemented over the KQI process in the scenario
where the link between subracks is congested. Disuse
Statement:In future versions, the
SERVICE_APPERCEIVE_SWITCH bit field value
under the ProcessSwitch parameter will be deleted.
Although the configuration interface in this version
supports delivery and synchronization of the bit field
value, the bit field value is no longer internally used.
Instead, the function of the bit field value will be
controlled by the ServiceApperceiveSwitch parameter
in the SET UUPCTRLSWITCH command.
GUI Value Range:
H2F_4B_SWITCH(H2F_4B_SWITCH),
RLC_SUFI_WINDOW_SWITCH(RLC_SUFI_WIN
DOW_SWITCH),
RLC_UM_HFN_INVALID_RRC_REL_SWITCH(R
LC_UM_HFN_INVALID_RRC_REL_SWITCH),
NO_CONG_RESUME_GUARANTEE_RATE_SWI
TCH(NO_CONG_RESUME_GUARANTEE_RATE_
SWITCH),
TPE_ONLY_SPLIT_SWITCH(TPE_ONLY_SPLIT_
SWITCH),
DELAY_MSG_SWITCH(DELAY_MSG_SWITCH),
RACH_SYNC_CHK_EFFECT_MODE_SWITCH(R
ACH_SYNC_CHK_EFFECT_MODE_SWITCH),
UEA1_SOFT_ENCRYPT_SWITCH(UEA1_SOFT_E
NCRYPT_SWITCH),
IUUP_RC_REPEAT_SWITCH(IUUP_RC_REPEAT
_SWITCH),
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWI
TCH(BIG_LITTLE_END_CONV_MSG_LEN_CHK
_SWITCH),
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SW
ITCH(INTER_SUBRACK_MCAST_MSG_LEN_CH
K_SWITCH),
PS_DATA_TIME_DELAY_CTRL_SWITCH(PS_D
ATA_TIME_DELAY_CTRL_SWITCH),
SILENT_INJECT_NOISE_DBG_SWITCH(SILENT

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

75

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

_INJECT_NOISE_DBG_SWITCH),
VOICE_CIPHER_DBG_SWITCH(VOICE_CIPHER
_DBG_SWITCH),
VQI_OPTIMIZATION_SWITCH(VQI_OPTIMIZAT
ION_SWITCH),
DELAY_POLL_TIMER_SWITCH(DELAY_POLL_
TIMER_SWITCH),
OVERLOAD_AMR_DISCARD_SWITCH(OVERLO
AD_AMR_DISCARD_SWITCH),
L2_RESOURCE_CHECK_SWITCH(L2_RESOURC
E_CHECK_SWITCH),
MACD_SCHEDULE_CHECK_SWITCH(MACD_S
CHEDULE_CHECK_SWITCH),
SERVICE_APPERCEIVE_SWITCH(SERVICE_APP
ERCEIVE_SWITCH),
IUUP_EMPTY_FRAME_DISCARD_SWITCH(IUU
P_EMPTY_FRAME_DISCARD_SWITCH),
PAGING_DETECT_SWITCH(PAGING_DETECT_
SWITCH),
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITC
H(IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWI
TCH),
PSDATA_UTRAN_PAGING_PREEMPTED_SWIT
CH(PSDATA_UTRAN_PAGING_PREEMPTED_S
WITCH),
KQI_SUBRACK_LOAD_CTRL_SWITCH(KQI_SU
BRACK_LOAD_CTRL_SWITCH)
Unit: None
Actual Value Range: H2F_4B_SWITCH,
RLC_SUFI_WINDOW_SWITCH,
RLC_UM_HFN_INVALID_RRC_REL_SWITCH,
NO_CONG_RESUME_GUARANTEE_RATE_SWI
TCH, TPE_ONLY_SPLIT_SWITCH,
DELAY_MSG_SWITCH,
RACH_SYNC_CHK_EFFECT_MODE_SWITCH,
UEA1_SOFT_ENCRYPT_SWITCH,
IUUP_RC_REPEAT_SWITCH,
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWI
TCH,
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SW
ITCH, PS_DATA_TIME_DELAY_CTRL_SWITCH,
SILENT_INJECT_NOISE_DBG_SWITCH,
VOICE_CIPHER_DBG_SWITCH,
VQI_OPTIMIZATION_SWITCH,
DELAY_POLL_TIMER_SWITCH,
OVERLOAD_AMR_DISCARD_SWITCH,
L2_RESOURCE_CHECK_SWITCH,
MACD_SCHEDULE_CHECK_SWITCH,
SERVICE_APPERCEIVE_SWITCH,
IUUP_EMPTY_FRAME_DISCARD_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

76

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PAGING_DETECT_SWITCH,
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITC
H,
PSDATA_UTRAN_PAGING_PREEMPTED_SWIT
CH, KQI_SUBRACK_LOAD_CTRL_SWITCH
Default Value:
H2F_4B_SWITCH:0,RLC_SUFI_WINDOW_SWITC
H:0,RLC_UM_HFN_INVALID_RRC_REL_SWITC
H:0,NO_CONG_RESUME_GUARANTEE_RATE_S
WITCH:0,TPE_ONLY_SPLIT_SWITCH:0,DELAY_
MSG_SWITCH:0,RACH_SYNC_CHK_EFFECT_M
ODE_SWITCH:0,UEA1_SOFT_ENCRYPT_SWITC
H:0,IUUP_RC_REPEAT_SWITCH:0,BIG_LITTLE_
END_CONV_MSG_LEN_CHK_SWITCH:0,INTER_
SUBRACK_MCAST_MSG_LEN_CHK_SWITCH:0,
PS_DATA_TIME_DELAY_CTRL_SWITCH:0,SILE
NT_INJECT_NOISE_DBG_SWITCH:0,VOICE_CIP
HER_DBG_SWITCH:0,VQI_OPTIMIZATION_SWI
TCH:0,DELAY_POLL_TIMER_SWITCH:1,OVERL
OAD_AMR_DISCARD_SWITCH:1,L2_RESOURC
E_CHECK_SWITCH:1,MACD_SCHEDULE_CHEC
K_SWITCH:1,SERVICE_APPERCEIVE_SWITCH:1
,IUUP_EMPTY_FRAME_DISCARD_SWITCH:1,P
AGING_DETECT_SWITCH:1,IUUP_INIT_FRAME
_IPTI_ERR_COMPAT_SWITCH:0,PSDATA_UTRA
N_PAGING_PREEMPTED_SWITCH:0,KQI_SUBR
ACK_LOAD_CTRL_SWITCH:1
Process
Switch

BSC691
0

SET
UDPUC
FGDAT
A

WRFD010510
WRFD010504
WRFD040100
WRFD010503
WRFD010502
WRFD020133
WRFD020132

Backgro
und QoS
Class

WRFD010501

Flow
Control

WRFD020123

Interacti
ve QoS
Class

WRFD010619

Issue 01 (2014-04-30)

3.4/6.8/1
3.6/27.2
Kbps
RRC
Connect
ion and
Radio
Access
Bearer
Establis
hment
and
Release

Streami

Meaning: 1)H2F_4B_SWITCH Whether to report the


event 4B measurement report. This parameter is used
to set the conditions for triggering event 4B reporting
during the H2F state transition. 0: The event 4B
measurement report is reported when both the
maximum traffic volume in the previous 10 ms and
the current traffic volume are smaller than the event
4B-triggering threshold. 1: The event 4B
measurement report is reported when the current
traffic volume is smaller than the event 4B-triggering
threshold. 2)RLC_SUFI_WINDOW_SWITCH
Whether to enable the RNC to handle RLC SUFI
WINDOW. For details about SUFI WINDOW, see the
3GPP TS 25.322. 0: This switch is turned off, and
the RNC does not handle RLC SUFI WINDOW. 1:
This switch is turned on, and the RNC handles RLC
SUFI WINDOW.
3)RLC_UM_HFN_INVALID_RRC_REL_SWITCH
Whether to enable the RLC in UM mode to send
Status Ind to the RRC. When the RLC in UM mode
adjusts the hyper frame number (HFN) quadruple or
more, the RLC sends Status Ind to the RRC and
instructs the RRC to release connections. 0: This

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

77

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

WRFD010301

ng QoS
Class

WRFD0106111
1

P2P
Downlo
ading
Rate
Control
during
Busy
Hour

switch is turned off. 1: This switch is turned on.


4)NO_CONG_RESUME_GUARANTEE_RATE_SW
ITCH Whether to enable the guaranteed bit rate
(GBR) protection and compensation function. When
overbooking congestion is cleared on the Iub interface
and the current UE rate is lower than the GBR, the
MAC-d improves the current UE rate to the GBR. 0:
This switch is turned off. 1: This switch is turned on.
5)TPE_ONLY_SPLIT_SWITCH Whether to enable
only the function of splitting acknowledged (ACK)
packets for the RLC TPE. When this switch is turned
on, the RLC TPE has only the function of splitting
ACK packets. 0: This switch is turned off. 1: This
switch is turned on. 6)DELAY_MSG_SWITCH
Whether to process delayed messages. When
configuration messages do not arrive on time due to
inter-board communication exceptions, the RLC,
MAC-d, and FP can process the messages received
within 1280 ms. 0: This switch is turned off. 1:
This switch is turned on.
7)RACH_SYNC_CHK_EFFECT_MODE_SWITCH
This parameter is used to set the effective way of
RNC synchronization detection function in the current
cell RACH channel. 0: The switch is turned off. When
RNC received the synchronous frame of the RACH
channel, the synchronization detection function of the
cell is effective immediately. 1: The switch is turned
on. When the cell is established, the synchronization
detection function of the cell is effective immediately.
8)UEA1_SOFT_ENCRYPT_SWITCH UEA1
software encrypted channel switches. 0: The switch is
turned off, UEA1 uses logical encryption. 1: The
switch is turned on, UEA1 uses software encryption.
9)IUUP_RC_REPEAT_SWITCH IuUP Rate
Control Repeat Switch Whether the RNC re-initiates
the IuUP rate control procedure after the CN fails to
adjust the downlink rate on the user plane. 0: When
the CN fails to adjust the downlink rate on the user
plane, the RNC does not re-initiate the IuUP rate
control procedure. 1: When the CN fails to adjust the
downlink rate on the user plane, the RNC re-initiates
the IuUP rate control procedure.
10)BIG_LITTLE_END_CONV_MSG_LEN_CHK_S
WITCH Check Message Length Upon Byte Order
Conversion Whether the RNC forcibly checks the
length of a message when the message is converted to
byte order. 0: The RNC does not check the length of a
message when the message is converted to byte order.
1: The RNC forcibly checks the length of a message
when the message is converted to byte order.
11)INTER_SUBRACK_MCAST_MSG_LEN_CHK_

Web
browsin
g
accelerat
ion
Convers
ational
QoS
Class
TCP
Accelera
tor
CS
voice
over
HSPA/H
SPA+
Paging
UE in
Idle,
CELL_P
CH,
URA_P
CH
State
(Type 1)
HSDPA
State
Transiti
on

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

78

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

SWITCH Whether the length of a inter-subrack


multicast message in an MBSC is checked, which
prevents the system exception caused by messages of
different lengths 1: This switch is set to on. A message
is processed only when its length is valid. 0: This
switch is set to off. A message is processed regardless
of whether its length is valid or not.
12)PS_DATA_TIME_DELAY_CTRL_SWITCH
Delay control switch for PS data transmission. The
delay control function discards packets once
congestion is detected, thereby reducing the delay and
improving the performance of delay-sensitive
services. 0: This switch is turned off. 1: This switch is
turned on.
13)SILENT_INJECT_NOISE_DBG_SWITCH
Whether the IuUP and FP noise injection function is
supported. The IuUP and FP noise injection function
is used to locate the problem of no audio. When a UE
tracing task is started for a UE performing voice
services, you can press any key on the terminal to start
noise injection. 0: The IuUP and FP noise injection
function is disabled. 1: The IuUP and FP noise
injection function is enabled.
14)VOICE_CIPHER_DBG_SWITCH Whether the
MAC-d hyper frame number (HFN) change function
is supported. The MAC-d HFN change function is
used to locate voice service encryption problems.
When a UE tracing task is started for a UE performing
voice services, you can press any key on the terminal
to change the MAC-d HFN of the UE. This change
affects the voice quality of the UE. 0: The MAC-d
HFN change function is disabled. 1: The MAC-d HFN
change function is enabled.
15)VQI_OPTIMIZATION_SWITCH Whether to
calculate the VQI measurement results of a call into
the current best cell in real time. 0: This switch is set
to off. The VQI measurement results of a call are
calculated into the corresponding VQI counters for the
best cell during call release. 1: This switch is set to on.
The VQI measurement results of a call are calculated
into the corresponding VQI counters for the current
best cell in real time.
16)DELAY_POLL_TIMER_SWITCH Whether to
increase the value of POLL TIMER. When the CPU
load of the UP process is heavy, the RNC
automatically prolongs the POLL TIMER to reduce
the times RLC status reports are sent. 0: This switch
is turned off. 1: This switch is turned on.
17)OVERLOAD_AMR_DISCARD_SWITCH
Whether to trigger the AMR packet loss function
when the UP process is overloaded. When the CPU

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

79

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

usage of the UP process exceeds the alarm threshold,


AMR packet loss is triggered. 0: This switch is turned
off. 1: This switch is turned on.
18)L2_RESOURCE_CHECK_SWITCH Whether to
enable the layer 2 (L2) instance resource check
function. L2 instance resources include RLC, MAC-d,
MAC-c, Fp, Mdc, and Iu User Plane (IuUP). When
the L2 instance resource check fails, the RRC
automatically releases the L2 instance resources. 0:
This switch is turned off. 1: This switch is turned on.
19)MACD_SCHEDULE_CHECK_SWITCH
Whether to enable the MAC-d scheduling check
function. When this switch is turned on, the RNC
checks MAC-d scheduling groups. The RNC provides
users with check information only when the MAC-d
scheduling groups are abnormal. 0: This switch is
turned off. 1: This switch is turned on.
20)SERVICE_APPERCEIVE_SWITCH Whether to
support the service awareness function. 0: This
switch is turned off, and the service awareness
function is supported. 1: This switch is turned on,
and the service awareness function is not supported.
21)IUUP_EMPTY_FRAME_DISCARD_SWITCH
Whether to enable the IuUP to discard null frames.
When this switch is turned on, the IuUP discards null
frames. 0: This switch is turned off. 1: This switch is
turned on. 22)PAGING_DETECT_SWITCH Whether
to enable the paging detection function on the GPU
board. Value 0 indicates that the paging detection
function is disabled. Value 1 indicates that the paging
detection function is enabled.
23)IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWI
TCH Whether the RNC performs compatibility
processing on the incorrect IPTI information element
(IE) contained in the IuUP initialization frame. This
switch takes effect only on AMR services when the
TrFO feature is validated. 1: This switch is turned
on, the RNC performs compatibility processing on the
incorrect IPTI IE contained in the IuUP initialization
frame. 0: This switch is turned off, the RNC does
not perform compatibility processing on the incorrect
IPTI IE contained in the IuUP initialization frame.
24)PSDATA_UTRAN_PAGING_PREEMPTED_SW
ITCH Whether the preemption algorithm takes effect
for the UTRAN paging triggered by downlink PS data
transmission. 1: This switch is turned on. When the
PCH is congested, the RNC preferentially sends CS
paging messages and holds back UTRAN paging
messages triggered by downlink PS data transmission
if "PagingSwitch" in the "SET UDPUCFGDATA" is
turned on, and the RNC preferentially sends short

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

80

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

message service (SMS) paging messages and holds


back UTRAN paging messages triggered by downlink
PS data transmission if "LowSignalPagingSwitch" in
the "SET UDPUCFGDATA" is turned on. 0: This
switch is turned off. The RNC does not preferentially
send CS paging or SMS paging messages.
25)KQI_SUBRACK_LOAD_CTRL_SWITCH
Whether flow control is implemented over the KQI
process when the link between subracks is congested.
1: When this switch is set to on, flow control is
implemented over the KQI process in the scenario
where the link between subracks is congested. 0:
When this switch is set to off, flow control is not
implemented over the KQI process in the scenario
where the link between subracks is congested. Disuse
Statement:In future versions, the
SERVICE_APPERCEIVE_SWITCH bit field value
under the ProcessSwitch parameter will be deleted.
Although the configuration interface in this version
supports delivery and synchronization of the bit field
value, the bit field value is no longer internally used.
Instead, the function of the bit field value will be
controlled by the ServiceApperceiveSwitch parameter
in the SET UUPCTRLSWITCH command.
GUI Value Range:
H2F_4B_SWITCH(H2F_4B_SWITCH),
RLC_SUFI_WINDOW_SWITCH(RLC_SUFI_WIN
DOW_SWITCH),
RLC_UM_HFN_INVALID_RRC_REL_SWITCH(R
LC_UM_HFN_INVALID_RRC_REL_SWITCH),
NO_CONG_RESUME_GUARANTEE_RATE_SWI
TCH(NO_CONG_RESUME_GUARANTEE_RATE_
SWITCH),
TPE_ONLY_SPLIT_SWITCH(TPE_ONLY_SPLIT_
SWITCH),
DELAY_MSG_SWITCH(DELAY_MSG_SWITCH),
RACH_SYNC_CHK_EFFECT_MODE_SWITCH(R
ACH_SYNC_CHK_EFFECT_MODE_SWITCH),
UEA1_SOFT_ENCRYPT_SWITCH(UEA1_SOFT_E
NCRYPT_SWITCH),
IUUP_RC_REPEAT_SWITCH(IUUP_RC_REPEAT
_SWITCH),
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWI
TCH(BIG_LITTLE_END_CONV_MSG_LEN_CHK
_SWITCH),
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SW
ITCH(INTER_SUBRACK_MCAST_MSG_LEN_CH
K_SWITCH),
PS_DATA_TIME_DELAY_CTRL_SWITCH(PS_D
ATA_TIME_DELAY_CTRL_SWITCH),
SILENT_INJECT_NOISE_DBG_SWITCH(SILENT

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

81

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

_INJECT_NOISE_DBG_SWITCH),
VOICE_CIPHER_DBG_SWITCH(VOICE_CIPHER
_DBG_SWITCH),
VQI_OPTIMIZATION_SWITCH(VQI_OPTIMIZAT
ION_SWITCH),
DELAY_POLL_TIMER_SWITCH(DELAY_POLL_
TIMER_SWITCH),
OVERLOAD_AMR_DISCARD_SWITCH(OVERLO
AD_AMR_DISCARD_SWITCH),
L2_RESOURCE_CHECK_SWITCH(L2_RESOURC
E_CHECK_SWITCH),
MACD_SCHEDULE_CHECK_SWITCH(MACD_S
CHEDULE_CHECK_SWITCH),
SERVICE_APPERCEIVE_SWITCH(SERVICE_APP
ERCEIVE_SWITCH),
IUUP_EMPTY_FRAME_DISCARD_SWITCH(IUU
P_EMPTY_FRAME_DISCARD_SWITCH),
PAGING_DETECT_SWITCH(PAGING_DETECT_
SWITCH),
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITC
H(IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWI
TCH),
PSDATA_UTRAN_PAGING_PREEMPTED_SWIT
CH(PSDATA_UTRAN_PAGING_PREEMPTED_S
WITCH),
KQI_SUBRACK_LOAD_CTRL_SWITCH(KQI_SU
BRACK_LOAD_CTRL_SWITCH)
Unit: None
Actual Value Range: H2F_4B_SWITCH,
RLC_SUFI_WINDOW_SWITCH,
RLC_UM_HFN_INVALID_RRC_REL_SWITCH,
NO_CONG_RESUME_GUARANTEE_RATE_SWI
TCH, TPE_ONLY_SPLIT_SWITCH,
DELAY_MSG_SWITCH,
RACH_SYNC_CHK_EFFECT_MODE_SWITCH,
UEA1_SOFT_ENCRYPT_SWITCH,
IUUP_RC_REPEAT_SWITCH,
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWI
TCH,
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SW
ITCH, PS_DATA_TIME_DELAY_CTRL_SWITCH,
SILENT_INJECT_NOISE_DBG_SWITCH,
VOICE_CIPHER_DBG_SWITCH,
VQI_OPTIMIZATION_SWITCH,
DELAY_POLL_TIMER_SWITCH,
OVERLOAD_AMR_DISCARD_SWITCH,
L2_RESOURCE_CHECK_SWITCH,
MACD_SCHEDULE_CHECK_SWITCH,
SERVICE_APPERCEIVE_SWITCH,
IUUP_EMPTY_FRAME_DISCARD_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

82

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PAGING_DETECT_SWITCH,
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITC
H,
PSDATA_UTRAN_PAGING_PREEMPTED_SWIT
CH, KQI_SUBRACK_LOAD_CTRL_SWITCH
Default Value:
H2F_4B_SWITCH:0,RLC_SUFI_WINDOW_SWITC
H:0,RLC_UM_HFN_INVALID_RRC_REL_SWITC
H:0,NO_CONG_RESUME_GUARANTEE_RATE_S
WITCH:0,TPE_ONLY_SPLIT_SWITCH:0,DELAY_
MSG_SWITCH:0,RACH_SYNC_CHK_EFFECT_M
ODE_SWITCH:0,UEA1_SOFT_ENCRYPT_SWITC
H:0,IUUP_RC_REPEAT_SWITCH:0,BIG_LITTLE_
END_CONV_MSG_LEN_CHK_SWITCH:0,INTER_
SUBRACK_MCAST_MSG_LEN_CHK_SWITCH:0,
PS_DATA_TIME_DELAY_CTRL_SWITCH:0,SILE
NT_INJECT_NOISE_DBG_SWITCH:0,VOICE_CIP
HER_DBG_SWITCH:0,VQI_OPTIMIZATION_SWI
TCH:0,DELAY_POLL_TIMER_SWITCH:1,OVERL
OAD_AMR_DISCARD_SWITCH:1,L2_RESOURC
E_CHECK_SWITCH:1,MACD_SCHEDULE_CHEC
K_SWITCH:1,SERVICE_APPERCEIVE_SWITCH:1
,IUUP_EMPTY_FRAME_DISCARD_SWITCH:1,P
AGING_DETECT_SWITCH:1,IUUP_INIT_FRAME
_IPTI_ERR_COMPAT_SWITCH:0,PSDATA_UTRA
N_PAGING_PREEMPTED_SWITCH:0,KQI_SUBR
ACK_LOAD_CTRL_SWITCH:1
PerfEnh
anceSwi
tch

BSC690
0

SET
UCORR
MPARA

WRFD0106100
4

HSDPA
Power
Control

WRFD021104

Emerge
ncy Call

WRFD0106140
4

HSUPA
2ms/10
ms TTI
Handov
er

WRFD140102
WRFD0206050
1
WRFD010202
WRFD0204000
3
WRFD020402

Issue 01 (2014-04-30)

CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
SRNS
Relocati
on (UE
Not

Meaning: 1. PERFENH_AMR_SPEC_BR_SWITCH:
When this switch is turned on, the procedure specific
to AMR service establishment takes effect. 2.
PERFENH_AMR_TMPLT_SWITCH: When this
switch is turned on, the AMR template takes effect. 3.
PERFENH_SRB_TMPLT_SWITCH: When this
switch is turned on, the SRB template takes effect. 4.
PERFENH_OLPC_TMPLT_SWITCH: When this
switch is turned on, the OLPC template takes effect. 5.
PERFENH_AMR_SP_TMPLT_SWITCH: When this
switch is turned on, the AMR parameter template
takes effect. 6.
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH:
When this switch is turned on, the intra-frequency
measurement control template takes effect. 7.
PERFENH_INTERRAT_PENALTY_50_SWITCH:
After a UE fails to be handed over to a 2G cell during
an inter-RAT handover, the RNC forbids the UE to
attempt a handover to the 2G cell in a certain period.
When this switch is turned on, the period is 50s. When
this switch is turned off, the period is 30s. 8.
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH:
When this switch is turned on, the uplink SRBs of

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

83

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

WRFD020400

Involved
)

WRFD010636

UE
State in
Connect
ed Mode
(CELLDCH,
CELL-P
CH,
URA-P
CH,
CELL-F
ACH)

HSUPA 10 ms non-conversational services are always


carried on DCHs, and the original parameter Type of
Channel Preferably Carrying Signaling RB is invalid.
When this switch is turned off, SRBs for HSUPA 10
ms non-conversational services can be carried on
HSUPA channels when the original parameter Type of
Channel Preferably Carrying Signaling RB is set to
HSUPA or HSPA. The switch is set to OFF by
default. 9.
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH:
When this switch is turned on, the single-user
peak-rate improvement algorithm of HSUPA 2 ms
TTI is enabled. When this switch is turned off, the
algorithm is disabled. The switch is set to OFF by
default. 10.
PERFENH_UU_P2D_CUC_OPT_SWITCH: When
this switch is turned on, the P2D cell update confirm
message simplification algorithm takes effect. When
this switch is turned off, the algorithm does not take
effect. By default, this switch is turned off. 11.
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
: This check box controls whether the RNC considers
the converged SIRTarget value that is used before
radio link reconfiguration in outer loop power control
performed after radio link reconfiguration. If the
check box is not selected, the RNC sends the initial
SIRTarget value used after radio link reconfiguration
to the NodeB.If the check box is selected, the RNC
selects a more appropriate value from the initial
SIRTarget value used after radio link reconfiguration
and the converged SIRTarget value used before radio
link reconfiguration. Then the RNC sends the selected
value to the NodeB. Setting of this check box takes
effect only when the
PC_RL_RECFG_SIR_TARGET_CARRY_SWITCH
check box is selected. 12.
PERFENH_RRC_REDIR_PROTECT_SWITCH:
When this switch is turned on, The mechanism to
avoid endless back-and-forth RRC-redirections takes
effect. The switch is set to OFF by default. 13.
PERFENH_H2F_OPT_SWITCH: whether to enable
the optimized algorithm for HSPA UE state transition
from CELL_DCH to CELL_FACH (also referred to
as H2F state transition). When the switch is turned on,
the optimized H2F state transition algorithm is
enabled, and event 4A measurement of traffic volume
or throughput is added to the state transition
procedure. The added event 4A measurement prevents
an H2F state transition when data is being transmitted.
14. PERFENH_PSTRAFFIC_P2H_SWITCH: When
the switch is turned on and a

Inter
System
Redirect
Measure
ment
Based
Direct
Retry
DRD
Introduc
tion
Package
SRB
over
HSUPA

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

84

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CELL_PCH/URA_PCH-to-CELL_DCH (P2D for


short) state transition is triggered for a PS service, the
PS service can be set up on HSPA channels after the
state transition. When the switch is turned off, PS
services can be set up only on DCHs after a P2D state
transition. This switch is turned off by default. 15.
PERFENH_VIP_USER_PCHR_MR_SWITCH:
When this switch is turned on, VIP UEs report their
transmit power to the RNC when required and
periodically measure signal quality of intra-frequency
cells. In addition, these UEs measure the downlink
BLER, the NodeB measures the uplink SIR, and the
RNC records the measurement results. 16.
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
: Switch for including the Tx interruption after trigger
IE in the uplink 4A traffic volume measurement
control message. When this switch is turned on, the
uplink 4A traffic volume measurement control
message from RNC includes the Tx interruption after
trigger IE for UEs that are in the CELL_FACH or
enhanced CELL_FACH state and processing PS BE
services. The value of this IE can be changed by
running the "SET UUESTATETRANS" command.
17.
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH: The NodeB baseband board uses different
processing specifications for users with different
uplink bearer services, for example, HSUPA TTI 2 ms
services, HSUPA TTI 10 ms services, and R99
services. When serving a large number of users, the
system cannot guarantee that all users can access the
network with the highest service bearer supported by
UEs.
This switch controls whether the RNC
allocates corresponding channels for new users based
on the cell capability reported through the NodeB
private interface. When this switch is turned on, the
RNC dynamically selects an appropriate uplink
service bearer and allocates corresponding channels
for new users to maximize the system capacity based
on the actual NodeB processing specifications. When
this switch is turned off, the optimization process is
disabled. 18.
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH: Whether to use the optimized TTI switching
algorithm for BE services When this switch is turned
off, the optimized algorithm does not take effect. The
original mechanism is implemented. When this
switch is turned on, the optimized algorithm takes
effect. After HSUPA services are configured or
reconfigured with 10 ms TTI due to network resource
(admission CEs, RTWP, consumed Iub bandwidth, or

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

85

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

consumed CEs) congestion or insufficient coverage,


these UEs cannot change to use 2 ms TTI if no data
needs to be transmitted. 19.
PERFENH_DOWNLOAD_ENHANCE_SWITCH:
Whether to activate the algorithm for increasing the
single-threaded download rate. 20.
PERFENH_OLPC_BLER_COEF_ADJUST: Switch
for adjusting the BLER coefficient specific to CS
services based on the best cell's uplink load status.
When this switch is turned on, the outer loop power
control algorithm uses the target BLER set by the
OMU board if the best cell's uplink load status is LDR
or OLC. If the status is neither LDR nor OLC, this
algorithm uses this target BLER after being divided
by five. 21.
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:
Whether to enable the function of delaying the
sending of an RRC_MEAS_CTRL message
containing AGPS information when an emergency
call is made. When this switch is turned on, the RNC
delays the sending of this message until the
emergency call is successfully set up. When this
switch is turned off, the RNC sends this message upon
receiving a LOCATION_REPORTING_CONTROL
message from the CN. 22.
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H: Whether to enable a UE having multiple RLSs to
use the value of "CQIReF" and the value of
"CQIFbCk" that are for UEs having only one RLS.
The two parameters can be set by running the "SET
UHSDPCCH" and "ADD UCELLHSDPCCH"
commands. When this switch is turned off, the UE
does not use the values of the two parameters that are
for UEs having only one RLS. When this switch is
turned on, the UE uses the values of the two
parameters that are for UEs having only one RLS. 23.
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH: Whether to enable a RELOCATION REQUIRED
message to contain the IE
calculationTimeForCiphering. When this switch is
turned on, static relocation request messages contain
the IE calculationTimeForCiphering. 24.
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH:
Whether to trigger the DRD procedure and channel
switchover from E-DCH or HS-DSCH to DCH when
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned off,
the DRD procedure and channel switchover from
E-DCH or HS-DSCH to DCH are not triggered if
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned on,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

86

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

the DRD procedure and channel switchover from


E-DCH or HS-DSCH to DCH are triggered if
messages transmitted over the Uu and Iub interfaces
do not arrive in time. 25.
PERFENH_CELL_CACLOAD_BROADCAST_AM
END: Whether to consider CE or code resource usage
when determining the resource status of a cell whose
serving boards or CP sub-systems are different from
those of its neighboring cells. When this switch is
turned on, the RNC determines the resource status of
such a cell based on power, CE, and code resource
usage. If power, CE, or code resources in a cell
become congested, the RNC determines that the cell
experiences resource congestion. When this switch is
turned off, the RNC determines the resource status of
such a cell based on power resource usage only. 26.
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH:
When this switch is turned on, candidate cells are
ranked by "InterFreqMeasQuantity" (in the "ADD
UCELLMBDRINTERFREQ" command) for MBDR,
and the cell with the best signal quality is selected as
the target cell. When this switch is turned off,
candidate cells are not ranked by
InterFreqMeasQuantity for MBDR. 27.
PERFENH_RRC_DRD_PREADMISSION_SWITCH
: Whether the RNC makes a pre-admission decision
on intra-RAT DRDs or redirections during an RRC
connection setup. When this switch is turned on, the
RNC makes a pre-admission decision on intra-RAT
DRDs or redirections during an RRC connection
setup. When this switch is turned off, the RNC does
not make a pre-admission decision on intra-RAT
DRDs or redirections during an RRC connection
setup. 28.
PERFENH_RRC_WEAK_REDIR_SWITCH:
Whether to activate the RRC redirection in weak
coverage algorithm. When this switch is turned on,
UEs located in weak coverage are redirected to the
neighboring GSM cell through RRC redirection.
When this switch is turned off, this algorithm is
disabled. 29.
PERFENH_L2U_CSFB_COMMCALL_SWITCH:
Whether to preferentially admit PS services of UEs
involved in LTE-to-UMTS CS fallback. When this
switch is turned on: If a UE involved in a
LTE-to-UMTS CS fallback is processing a
non-real-time PS service, the channel type and initial
data rate for the PS service are determined by the
"NRTInitRateforL2U" parameter in the "SET UFRC"
command during service admission. If the UE is
processing a real-time PS service, the UE follows the

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

87

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

standard access procedure. If the access attempt fails


and the "PreemptAlgoSwitch" in the "SET
UQUEUEPREEMPT" command is turned on, the UE
can preempt radio resources of existing UEs in the
UMTS cell. When this switch is turned off, the UE
follows the standard access procedure for the PS
service. 30.
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated
single-signaling R99 channel. When the switch
specified by this parameter is turned on, blind
detection is enabled. 31.
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated AMR
R99 channel. When the switch specified by this
parameter is turned on, blind detection is enabled if
the HSDPA service has been set up and there are
signaling and AMR traffic carried on the R99 channel.
32.
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT:
Whether to allow R6 UEs to switch from HSUPA 10
ms to 2 ms TTI. When the switch is turned on, this
switching is not allowed for R6 UEs. When the switch
is turned off, this limit does not work. This parameter
is an advanced parameter. To modify this parameter,
contact Huawei Customer Service Center for technical
support.
GUI Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

88

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Unit: None
Actual Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

89

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Default Value:
PERFENH_AMR_SPEC_BR_SWITCH:1,PERFENH
_AMR_TMPLT_SWITCH:1,PERFENH_SRB_TMP
LT_SWITCH:1,PERFENH_OLPC_TMPLT_SWITC
H:1,PERFENH_AMR_SP_TMPLT_SWITCH:1,PER
FENH_INTRAFREQ_MC_TMPLT_SWITCH:1,PER
FENH_INTERRAT_PENALTY_50_SWITCH:1,PER
FENH_SRB_OVER_HSUPA_TTI10_SWITCH:0,PE
RFENH_HSUPA_TTI2_ENHANCE_SWITCH:0,PE
RFENH_UU_P2D_CUC_OPT_SWITCH:0,PERFEN
H_RL_RECFG_SIR_CONSIDER_SWITCH:1,PERF
ENH_RRC_REDIR_PROTECT_SWITCH:0,PERFE
NH_H2F_OPT_SWITCH:0,PERFENH_PSTRAFFIC
_P2H_SWITCH:0,PERFENH_VIP_USER_PCHR_M
R_SWITCH:0,PERFENH_TX_INTERRUPT_AFT_T
RIG_SWITCH:0,PERFENH_CELL_HSUPA_CAP_C
HANGE_OPT_SWITCH:0,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH:0,PERFENH_DOWNLOAD_ENHANCE_SWI
TCH:0,PERFENH_OLPC_BLER_COEF_ADJUST:1,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:0,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H:0,PERFENH_RELOC_IE_CALCTIMEFORCIP_S
WITCH:0,PERFENH_IS_TIMEOUT_TRIG_DRD_S
WITCH:0,PERFENH_CELL_CACLOAD_BROADC
AST_AMEND:1,PERFENH_MBDR_TARCELLSEL
_OPT_SWITCH:0,PERFENH_RRC_DRD_PREAD
MISSION_SWITCH:0,PERFENH_RRC_WEAK_RE
DIR_SWITCH:0,PERFENH_L2U_CSFB_COMMCA
LL_SWITCH:0,PERFENH_DLBLINDDETECT_WH
EN_ONLYSRBONDCH:0,PERFENH_DLBLINDDE
TECT_WHEN_SRBAMRONDCH:0,PERFENH_R6_
HSUPA_TTI_10MSTO2MS_LIMIT:0
PerfEnh
anceSwi
tch

BSC691
0

Issue 01 (2014-04-30)

SET
UCORR
MPARA

WRFD0106100
4

HSDPA
Power
Control

WRFD021104

Emerge
ncy Call

Meaning: 1. PERFENH_AMR_SPEC_BR_SWITCH:
When this switch is turned on, the procedure specific
to AMR service establishment takes effect. 2.
PERFENH_AMR_TMPLT_SWITCH: When this
switch is turned on, the AMR template takes effect. 3.
PERFENH_SRB_TMPLT_SWITCH: When this

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

90

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

WRFD0106140
4

HSUPA
2ms/10
ms TTI
Handov
er

switch is turned on, the SRB template takes effect. 4.


PERFENH_OLPC_TMPLT_SWITCH: When this
switch is turned on, the OLPC template takes effect. 5.
PERFENH_AMR_SP_TMPLT_SWITCH: When this
switch is turned on, the AMR parameter template
takes effect. 6.
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH:
When this switch is turned on, the intra-frequency
measurement control template takes effect. 7.
PERFENH_INTERRAT_PENALTY_50_SWITCH:
After a UE fails to be handed over to a 2G cell during
an inter-RAT handover, the RNC forbids the UE to
attempt a handover to the 2G cell in a certain period.
When this switch is turned on, the period is 50s. When
this switch is turned off, the period is 30s. 8.
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH:
When this switch is turned on, the uplink SRBs of
HSUPA 10 ms non-conversational services are always
carried on DCHs, and the original parameter Type of
Channel Preferably Carrying Signaling RB is invalid.
When this switch is turned off, SRBs for HSUPA 10
ms non-conversational services can be carried on
HSUPA channels when the original parameter Type of
Channel Preferably Carrying Signaling RB is set to
HSUPA or HSPA. The switch is set to OFF by
default. 9.
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH:
When this switch is turned on, the single-user
peak-rate improvement algorithm of HSUPA 2 ms
TTI is enabled. When this switch is turned off, the
algorithm is disabled. The switch is set to OFF by
default. 10.
PERFENH_UU_P2D_CUC_OPT_SWITCH: When
this switch is turned on, the P2D cell update confirm
message simplification algorithm takes effect. When
this switch is turned off, the algorithm does not take
effect. By default, this switch is turned off. 11.
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
: This check box controls whether the RNC considers
the converged SIRTarget value that is used before
radio link reconfiguration in outer loop power control
performed after radio link reconfiguration. If the
check box is not selected, the RNC sends the initial
SIRTarget value used after radio link reconfiguration
to the NodeB.If the check box is selected, the RNC
selects a more appropriate value from the initial
SIRTarget value used after radio link reconfiguration
and the converged SIRTarget value used before radio
link reconfiguration. Then the RNC sends the selected
value to the NodeB. Setting of this check box takes
effect only when the

WRFD140102
WRFD0206050
1
WRFD010202
WRFD0204000
3
WRFD020402
WRFD020400
WRFD010636

CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
SRNS
Relocati
on (UE
Not
Involved
)
UE
State in
Connect
ed Mode
(CELLDCH,
CELL-P
CH,
URA-P
CH,
CELL-F
ACH)
Inter
System
Redirect
Measure
ment
Based
Direct
Retry
DRD
Introduc
tion
Package
SRB
over
HSUPA

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

91

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PC_RL_RECFG_SIR_TARGET_CARRY_SWITCH
check box is selected. 12.
PERFENH_RRC_REDIR_PROTECT_SWITCH:
When this switch is turned on, The mechanism to
avoid endless back-and-forth RRC-redirections takes
effect. The switch is set to OFF by default. 13.
PERFENH_H2F_OPT_SWITCH: whether to enable
the optimized algorithm for HSPA UE state transition
from CELL_DCH to CELL_FACH (also referred to
as H2F state transition). When the switch is turned on,
the optimized H2F state transition algorithm is
enabled, and event 4A measurement of traffic volume
or throughput is added to the state transition
procedure. The added event 4A measurement prevents
an H2F state transition when data is being transmitted.
14. PERFENH_PSTRAFFIC_P2H_SWITCH: When
the switch is turned on and a
CELL_PCH/URA_PCH-to-CELL_DCH (P2D for
short) state transition is triggered for a PS service, the
PS service can be set up on HSPA channels after the
state transition. When the switch is turned off, PS
services can be set up only on DCHs after a P2D state
transition. This switch is turned off by default. 15.
PERFENH_VIP_USER_PCHR_MR_SWITCH:
When this switch is turned on, VIP UEs report their
transmit power to the RNC when required and
periodically measure signal quality of intra-frequency
cells. In addition, these UEs measure the downlink
BLER, the NodeB measures the uplink SIR, and the
RNC records the measurement results. 16.
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
: Switch for including the Tx interruption after trigger
IE in the uplink 4A traffic volume measurement
control message. When this switch is turned on, the
uplink 4A traffic volume measurement control
message from RNC includes the Tx interruption after
trigger IE for UEs that are in the CELL_FACH or
enhanced CELL_FACH state and processing PS BE
services. The value of this IE can be changed by
running the "SET UUESTATETRANS" command.
17.
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH: The NodeB baseband board uses different
processing specifications for users with different
uplink bearer services, for example, HSUPA TTI 2 ms
services, HSUPA TTI 10 ms services, and R99
services. When serving a large number of users, the
system cannot guarantee that all users can access the
network with the highest service bearer supported by
UEs.
This switch controls whether the RNC
allocates corresponding channels for new users based

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

92

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

on the cell capability reported through the NodeB


private interface. When this switch is turned on, the
RNC dynamically selects an appropriate uplink
service bearer and allocates corresponding channels
for new users to maximize the system capacity based
on the actual NodeB processing specifications. When
this switch is turned off, the optimization process is
disabled. 18.
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH: Whether to use the optimized TTI switching
algorithm for BE services When this switch is turned
off, the optimized algorithm does not take effect. The
original mechanism is implemented. When this
switch is turned on, the optimized algorithm takes
effect. After HSUPA services are configured or
reconfigured with 10 ms TTI due to network resource
(admission CEs, RTWP, consumed Iub bandwidth, or
consumed CEs) congestion or insufficient coverage,
these UEs cannot change to use 2 ms TTI if no data
needs to be transmitted. 19.
PERFENH_DOWNLOAD_ENHANCE_SWITCH:
Whether to activate the algorithm for increasing the
single-threaded download rate. 20.
PERFENH_OLPC_BLER_COEF_ADJUST: Switch
for adjusting the BLER coefficient specific to CS
services based on the best cell's uplink load status.
When this switch is turned on, the outer loop power
control algorithm uses the target BLER set by the
OMU board if the best cell's uplink load status is LDR
or OLC. If the status is neither LDR nor OLC, this
algorithm uses this target BLER after being divided
by five. 21.
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:
Whether to enable the function of delaying the
sending of an RRC_MEAS_CTRL message
containing AGPS information when an emergency
call is made. When this switch is turned on, the RNC
delays the sending of this message until the
emergency call is successfully set up. When this
switch is turned off, the RNC sends this message upon
receiving a LOCATION_REPORTING_CONTROL
message from the CN. 22.
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H: Whether to enable a UE having multiple RLSs to
use the value of "CQIReF" and the value of
"CQIFbCk" that are for UEs having only one RLS.
The two parameters can be set by running the "SET
UHSDPCCH" and "ADD UCELLHSDPCCH"
commands. When this switch is turned off, the UE
does not use the values of the two parameters that are
for UEs having only one RLS. When this switch is

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

93

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

turned on, the UE uses the values of the two


parameters that are for UEs having only one RLS. 23.
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH: Whether to enable a RELOCATION REQUIRED
message to contain the IE
calculationTimeForCiphering. When this switch is
turned on, static relocation request messages contain
the IE calculationTimeForCiphering. 24.
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH:
Whether to trigger the DRD procedure and channel
switchover from E-DCH or HS-DSCH to DCH when
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned off,
the DRD procedure and channel switchover from
E-DCH or HS-DSCH to DCH are not triggered if
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned on,
the DRD procedure and channel switchover from
E-DCH or HS-DSCH to DCH are triggered if
messages transmitted over the Uu and Iub interfaces
do not arrive in time. 25.
PERFENH_CELL_CACLOAD_BROADCAST_AM
END: Whether to consider CE or code resource usage
when determining the resource status of a cell whose
serving boards or CP sub-systems are different from
those of its neighboring cells. When this switch is
turned on, the RNC determines the resource status of
such a cell based on power, CE, and code resource
usage. If power, CE, or code resources in a cell
become congested, the RNC determines that the cell
experiences resource congestion. When this switch is
turned off, the RNC determines the resource status of
such a cell based on power resource usage only. 26.
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH:
When this switch is turned on, candidate cells are
ranked by "InterFreqMeasQuantity" (in the "ADD
UCELLMBDRINTERFREQ" command) for MBDR,
and the cell with the best signal quality is selected as
the target cell. When this switch is turned off,
candidate cells are not ranked by
InterFreqMeasQuantity for MBDR. 27.
PERFENH_RRC_DRD_PREADMISSION_SWITCH
: Whether the RNC makes a pre-admission decision
on intra-RAT DRDs or redirections during an RRC
connection setup. When this switch is turned on, the
RNC makes a pre-admission decision on intra-RAT
DRDs or redirections during an RRC connection
setup. When this switch is turned off, the RNC does
not make a pre-admission decision on intra-RAT
DRDs or redirections during an RRC connection
setup. 28.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

94

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_RRC_WEAK_REDIR_SWITCH:
Whether to activate the RRC redirection in weak
coverage algorithm. When this switch is turned on,
UEs located in weak coverage are redirected to the
neighboring GSM cell through RRC redirection.
When this switch is turned off, this algorithm is
disabled. 29.
PERFENH_L2U_CSFB_COMMCALL_SWITCH:
Whether to preferentially admit PS services of UEs
involved in LTE-to-UMTS CS fallback. When this
switch is turned on: If a UE involved in a
LTE-to-UMTS CS fallback is processing a
non-real-time PS service, the channel type and initial
data rate for the PS service are determined by the
"NRTInitRateforL2U" parameter in the "SET UFRC"
command during service admission. If the UE is
processing a real-time PS service, the UE follows the
standard access procedure. If the access attempt fails
and the "PreemptAlgoSwitch" in the "SET
UQUEUEPREEMPT" command is turned on, the UE
can preempt radio resources of existing UEs in the
UMTS cell. When this switch is turned off, the UE
follows the standard access procedure for the PS
service. 30.
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated
single-signaling R99 channel. When the switch
specified by this parameter is turned on, blind
detection is enabled. 31.
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated AMR
R99 channel. When the switch specified by this
parameter is turned on, blind detection is enabled if
the HSDPA service has been set up and there are
signaling and AMR traffic carried on the R99 channel.
32.
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT:
Whether to allow R6 UEs to switch from HSUPA 10
ms to 2 ms TTI. When the switch is turned on, this
switching is not allowed for R6 UEs. When the switch
is turned off, this limit does not work. This parameter
is an advanced parameter. To modify this parameter,
contact Huawei Customer Service Center for technical
support.
GUI Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

95

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Unit: None
Actual Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

96

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Default Value:
PERFENH_AMR_SPEC_BR_SWITCH:1,PERFENH
_AMR_TMPLT_SWITCH:1,PERFENH_SRB_TMP
LT_SWITCH:1,PERFENH_OLPC_TMPLT_SWITC
H:1,PERFENH_AMR_SP_TMPLT_SWITCH:1,PER
FENH_INTRAFREQ_MC_TMPLT_SWITCH:1,PER
FENH_INTERRAT_PENALTY_50_SWITCH:1,PER
FENH_SRB_OVER_HSUPA_TTI10_SWITCH:0,PE
RFENH_HSUPA_TTI2_ENHANCE_SWITCH:0,PE
RFENH_UU_P2D_CUC_OPT_SWITCH:0,PERFEN
H_RL_RECFG_SIR_CONSIDER_SWITCH:1,PERF
ENH_RRC_REDIR_PROTECT_SWITCH:0,PERFE
NH_H2F_OPT_SWITCH:0,PERFENH_PSTRAFFIC
_P2H_SWITCH:0,PERFENH_VIP_USER_PCHR_M
R_SWITCH:0,PERFENH_TX_INTERRUPT_AFT_T
RIG_SWITCH:0,PERFENH_CELL_HSUPA_CAP_C
HANGE_OPT_SWITCH:0,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH:0,PERFENH_DOWNLOAD_ENHANCE_SWI
TCH:0,PERFENH_OLPC_BLER_COEF_ADJUST:1,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:0,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H:0,PERFENH_RELOC_IE_CALCTIMEFORCIP_S

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

97

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

WITCH:0,PERFENH_IS_TIMEOUT_TRIG_DRD_S
WITCH:0,PERFENH_CELL_CACLOAD_BROADC
AST_AMEND:1,PERFENH_MBDR_TARCELLSEL
_OPT_SWITCH:0,PERFENH_RRC_DRD_PREAD
MISSION_SWITCH:0,PERFENH_RRC_WEAK_RE
DIR_SWITCH:0,PERFENH_L2U_CSFB_COMMCA
LL_SWITCH:0,PERFENH_DLBLINDDETECT_WH
EN_ONLYSRBONDCH:0,PERFENH_DLBLINDDE
TECT_WHEN_SRBAMRONDCH:0,PERFENH_R6_
HSUPA_TTI_10MSTO2MS_LIMIT:0
AmrUlR
ateAdjTi
merLen

BSC690
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Timer for triggering a second adjustment of


the UL AMR mode. This parameter specifies the
duration of waiting for the voice quality enhanced
acknowledgement after the UL AMR mode
adjustment when the associated command is
delivered. The UL AMRC rate adjust timer starts
when AMRC mode adjustment procedure is triggered,
and stops when the next measurement report is
received. If no measurement report is received when
the UL AMRC timer expires, you can infer that the
measured value remains in the same state as that
before the previous UL AMRC mode adjustment. The
previous AMRC mode adjustment is not effective, and
another adjustment is required.
GUI Value Range: 20~64000
Unit: ms
Actual Value Range: 20~64000
Default Value: 3000

AmrUlR
ateAdjTi
merLen

BSC691
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Timer for triggering a second adjustment of


the UL AMR mode. This parameter specifies the
duration of waiting for the voice quality enhanced
acknowledgement after the UL AMR mode
adjustment when the associated command is
delivered. The UL AMRC rate adjust timer starts
when AMRC mode adjustment procedure is triggered,
and stops when the next measurement report is
received. If no measurement report is received when
the UL AMRC timer expires, you can infer that the
measured value remains in the same state as that
before the previous UL AMRC mode adjustment. The
previous AMRC mode adjustment is not effective, and
another adjustment is required.
GUI Value Range: 20~64000
Unit: ms
Actual Value Range: 20~64000
Default Value: 3000

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

98

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

WAmrU
lRateAd
jTimerL
en

BSC690
0

SET
UQOSA
CT

WRFD020309

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Timer for triggering a second adjustment of


the UL WAMR mode. This parameter specifies the
duration of waiting for the voice quality enhanced
acknowledgement after the UL WAMR mode
adjustment when the associated command is
delivered. The UL WAMR rate adjust timer starts
when AMRC mode adjustment procedure is triggered,
and stops when the next measurement report is
received. If no measurement report is received when
the UL AMRC timer expires, you can infer that the
measured value remains in the same state as that
before the previous UL AMRC mode adjustment. The
previous AMRC mode adjustment is not effective, and
another adjustment is required.

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

GUI Value Range: 20~64000


Unit: ms
Actual Value Range: 20~64000
Default Value: 3000
WAmrU
lRateAd
jTimerL
en

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

Meaning: Timer for triggering a second adjustment of


the UL WAMR mode. This parameter specifies the
duration of waiting for the voice quality enhanced
acknowledgement after the UL WAMR mode
adjustment when the associated command is
delivered. The UL WAMR rate adjust timer starts
when AMRC mode adjustment procedure is triggered,
and stops when the next measurement report is
received. If no measurement report is received when
the UL AMRC timer expires, you can infer that the
measured value remains in the same state as that
before the previous UL AMRC mode adjustment. The
previous AMRC mode adjustment is not effective, and
another adjustment is required.
GUI Value Range: 20~64000
Unit: ms
Actual Value Range: 20~64000
Default Value: 3000

DlMode
Change
TimerLe
n

BSC690
0

Issue 01 (2014-04-30)

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: The AMRC needs to check whether the


TFO/TrFO exists before adjusting DL AMR speech
rate. If the TFO/TrFO does not exist, the CN has the
associated encoder and the RNC delivers the RATE
CONTROL command to the CN and starts the timer.
If the TFO/TrFO exists, the CN has no associated
encoder and the local RNC delivers to the peer RNC a
command requesting the AMR mode at a lower level.
In addition, the local RNC starts the timer. After the
peer RNC receives the command, it directly uses the
AMR mode at a lower level for the UL and returns the

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

99

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

adjustment information to the local RNC. If the


acknowledgement message is received before the
timer expires, the adjustment of the DL AMR speech
rate is successful. Otherwise, the adjustment fails.
GUI Value Range: 1~4294967295
Unit: ms
Actual Value Range: 1~4294967295
Default Value: 5000
DlMode
Change
TimerLe
n

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: The AMRC needs to check whether the


TFO/TrFO exists before adjusting DL AMR speech
rate. If the TFO/TrFO does not exist, the CN has the
associated encoder and the RNC delivers the RATE
CONTROL command to the CN and starts the timer.
If the TFO/TrFO exists, the CN has no associated
encoder and the local RNC delivers to the peer RNC a
command requesting the AMR mode at a lower level.
In addition, the local RNC starts the timer. After the
peer RNC receives the command, it directly uses the
AMR mode at a lower level for the UL and returns the
adjustment information to the local RNC. If the
acknowledgement message is received before the
timer expires, the adjustment of the DL AMR speech
rate is successful. Otherwise, the adjustment fails.
GUI Value Range: 1~4294967295
Unit: ms
Actual Value Range: 1~4294967295
Default Value: 5000

DlMode
Change
TimerLe
n

BSC690
0

Issue 01 (2014-04-30)

SET
UAMR
CWB

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: The AMRC needs to check whether the


TFO/TrFO exists before adjusting DL wideband AMR
speech rate. If the TFO/TrFO does not exist, the CN
has the associated encoder and the RNC delivers the
RATE CONTROL command to the CN and starts the
timer. If the TFO/TrFO exists, the CN has no
associated encoder and the local RNC delivers to the
peer RNC a command requesting the wideband AMR
mode at a lower level. In addition, the local RNC
starts the timer. After the peer RNC receives the
command, it directly uses the wideband AMR mode at
a lower level for the UL and returns the adjustment
information to the local RNC. If the acknowledgement
message is received before the timer expires, the
adjustment of the DL wideband AMR speech rate is
successful. Otherwise, the adjustment fails. If
TFO/TrFO is unavailable, it is recommended that the
timer to be set to 3000ms or else it is 7000ms instead
because of more procedures involved in rate
adjustment.

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

100

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

GUI Value Range: 1~4294967295


Unit: ms
Actual Value Range: 1~4294967295
Default Value: 5000
DlMode
Change
TimerLe
n

BSC691
0

SET
UAMR
CWB

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: The AMRC needs to check whether the


TFO/TrFO exists before adjusting DL wideband AMR
speech rate. If the TFO/TrFO does not exist, the CN
has the associated encoder and the RNC delivers the
RATE CONTROL command to the CN and starts the
timer. If the TFO/TrFO exists, the CN has no
associated encoder and the local RNC delivers to the
peer RNC a command requesting the wideband AMR
mode at a lower level. In addition, the local RNC
starts the timer. After the peer RNC receives the
command, it directly uses the wideband AMR mode at
a lower level for the UL and returns the adjustment
information to the local RNC. If the acknowledgement
message is received before the timer expires, the
adjustment of the DL wideband AMR speech rate is
successful. Otherwise, the adjustment fails. If
TFO/TrFO is unavailable, it is recommended that the
timer to be set to 3000ms or else it is 7000ms instead
because of more procedures involved in rate
adjustment.
GUI Value Range: 1~4294967295
Unit: ms
Actual Value Range: 1~4294967295
Default Value: 5000

AMRQo
sPerfor
m

BSC690
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: When the parameter is set to YES, the QoS


control algorithm is used for AMR services. When the
parameter is set to NO, the QoS control algorithm is
not used for AMR services.The QoS actions of AMR
services include rate downsizing, inter frequency
handover and inter rat handover.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

AMRQo
sPerfor
m

BSC691
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: When the parameter is set to YES, the QoS


control algorithm is used for AMR services. When the
parameter is set to NO, the QoS control algorithm is
not used for AMR services.The QoS actions of AMR
services include rate downsizing, inter frequency
handover and inter rat handover.
GUI Value Range: NO, YES

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

101

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Unit: None
Actual Value Range: NO, YES
Default Value: NO
UlQosA
mrInterF
reqHoS
witch

UlQosA
mrInterF
reqHoS
witch

UlQosW
AmrInte
rFreqHo
Switch

UlQosW
AmrInte
rFreqHo
Switch

BSC690
0

BSC691
0

BSC690
0

BSC691
0

Issue 01 (2014-04-30)

SET
UQOSA
CT

SET
UQOSA
CT

SET
UQOSA
CT

SET
UQOSA
CT

WRFD020309
WRFD020701

WRFD020309
WRFD020701

WRFD020309
WRFD020701

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for UL QoS of AMR services. When
the parameter is set to YES, inter-frequency handover
can be performed for AMR services to ensure the
QoS.

AMR/W
B-AMR
Speech
Rates
Control

Unit: None

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for UL QoS of AMR services. When
the parameter is set to YES, inter-frequency handover
can be performed for AMR services to ensure the
QoS.

AMR/W
B-AMR
Speech
Rates
Control

Unit: None

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for UL QoS of WAMR services.
When the parameter is set to YES, inter-frequency
handover can be performed for WAMR services to
ensure the QoS.

AMR/W
B-AMR
Speech
Rates
Control

Unit: None

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for UL QoS of WAMR services.
When the parameter is set to YES, inter-frequency
handover can be performed for WAMR services to
ensure the QoS.

AMR/W
B-AMR
Speech
Rates

Unit: None

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

102

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Control
UlQosA
mrInter
RatHoS
witch

BSC690
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

UlQosA
mrInter
RatHoS
witch

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

UlQosW
AmrInte
rRatHoS
witch

BSC690
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

UlQosW
AmrInte
rRatHoS
witch

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

DlQosA

BSC690

Issue 01 (2014-04-30)

SET

WRFD-

Inter-R

Meaning: Inter-RAT handover switch of link stability


control for UL QoS of AMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for AMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-RAT handover switch of link stability


control for UL QoS of AMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for AMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-RAT handover switch of link stability


control for UL QoS of WAMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for WAMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-RAT handover switch of link stability


control for UL QoS of WAMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for WAMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-frequency handover switch of link

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

103

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

mrInterF
reqHoS
witch

UQOSA
CT

020309

AT
Handov
er Based
on DL
QoS

stability control for DL QoS of AMR services. When


the parameter is set to YES, inter-frequency handover
can be performed for AMR services to ensure the
QoS.

AMR/W
B-AMR
Speech
Rates
Control

Unit: None

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for DL QoS of AMR services. When
the parameter is set to YES, inter-frequency handover
can be performed for AMR services to ensure the
QoS.

AMR/W
B-AMR
Speech
Rates
Control

Unit: None

Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS

Meaning: Inter-frequency handover switch of link


stability control for DL QoS of WAMR services.
When the parameter is set to YES, inter-frequency
handover can be performed for WAMR services to
ensure the QoS.

DlQosA
mrInterF
reqHoS
witch

DlQosW
AmrInte
rFreqHo
Switch

BSC691
0

BSC690
0

SET
UQOSA
CT

SET
UQOSA
CT

WRFD020701

WRFD020309
WRFD020701

WRFD020304
WRFD020701

AMR/W
B-AMR
Speech
Rates
Control
DlQosW
AmrInte
rFreqHo
Switch

BSC691
0

SET
UQOSA
CT

WRFD020304
WRFD020701

Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

DlQosA
mrInter

BSC690
0

Issue 01 (2014-04-30)

SET
UQOSA

WRFD020309

Inter-R
AT

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

GUI Value Range: NO, YES


Actual Value Range: NO, YES
Default Value: NO

GUI Value Range: NO, YES


Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-frequency handover switch of link


stability control for DL QoS of WAMR services.
When the parameter is set to YES, inter-frequency
handover can be performed for WAMR services to
ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Inter-RAT handover switch of link stability


control for DL QoS of AMR services. When the

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

104

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

RatHoS
witch

11 Parameters

MML
Comma
nd

Feature
ID

Feature
Name

Description

CT

WRFD010613

Handov
er Based
on DL
QoS

parameter is set to YES, inter-RAT handover can be


performed for AMR services to ensure the QoS.

WRFD020701

AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

GUI Value Range: NO, YES


Unit: None
Actual Value Range: NO, YES
Default Value: NO

AMR/W
B-AMR
Speech
Rates
Control
DlQosA
mrInter
RatHoS
witch

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD010613
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

Meaning: Inter-RAT handover switch of link stability


control for DL QoS of AMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for AMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

AMR/W
B-AMR
Speech
Rates
Control
DlQosW
AmrInte
rRatHoS
witch

BSC690
0

SET
UQOSA
CT

WRFD020309
WRFD010613
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

Meaning: Inter-RAT handover switch of link stability


control for DL QoS of WAMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for WAMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

AMR/W

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

105

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

B-AMR
Speech
Rates
Control
DlQosW
AmrInte
rRatHoS
witch

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD010613
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

Meaning: Inter-RAT handover switch of link stability


control for DL QoS of WAMR services. When the
parameter is set to YES, inter-RAT handover can be
performed for WAMR services to ensure the QoS.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

AMR/W
B-AMR
Speech
Rates
Control
UlAmrT
rigTime
6A1

BSC690
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6A1 measurement condition
before the event 6A1 is triggered. Event triggering is
used for UL measurement. The event 6A1 is triggered
when the measured value is greater than the absolute
upper threshold 6A1. When the event 6A1 is
triggered, the AMR speech rate should be lowered.
The measured value is reported after it fulfills the
conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to
prevent the sudden change of the measured value for
being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6A1

BSC691
0

ADD
UCELL
QUALI
TYMEA
S
MOD

Issue 01 (2014-04-30)

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6A1 measurement condition
before the event 6A1 is triggered. Event triggering is
used for UL measurement. The event 6A1 is triggered
when the measured value is greater than the absolute
upper threshold 6A1. When the event 6A1 is

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

106

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

UCELL
QUALI
TYMEA
S

Description

triggered, the AMR speech rate should be lowered.


The measured value is reported after it fulfills the
conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to
prevent the sudden change of the measured value for
being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6B1

BSC690
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6B1 measurement condition before
the event 6B1 is triggered. Event triggering is used for
UL measurement. The event 6B1 is triggered when
the measured value is lower than the absolute lower
threshold 6B1. When the event 6B1 is triggered, the
AMR speech rate is not lowered. The measured value
is reported after it fulfills the conditions for reporting
and for the trigger time specified by this parameter.
The trigger time is used to prevent the sudden change
of the measured value for being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6B1

BSC691
0

ADD
UCELL
QUALI
TYMEA
S
MOD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6B1 measurement condition before
the event 6B1 is triggered. Event triggering is used for
UL measurement. The event 6B1 is triggered when
the measured value is lower than the absolute lower
threshold 6B1. When the event 6B1 is triggered, the
AMR speech rate is not lowered. The measured value
is reported after it fulfills the conditions for reporting
and for the trigger time specified by this parameter.
The trigger time is used to prevent the sudden change
of the measured value for being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

107

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320
UlAmrT
rigTime
6B2

BSC690
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6B2 measurement condition before
the event 6B2 is triggered. Event triggering is used for
UL measurement. The event 6B2 is triggered when
the measured value is lower than the absolute lower
threshold 6B2. When the event 6B2 is triggered, the
AMR speech rate should be raised. The measured
value is reported after it fulfills the conditions for
reporting and for the trigger time specified by this
parameter. The trigger time is used to prevent the
sudden change of the measured value for being
reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6B2

BSC691
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6B2 measurement condition before
the event 6B2 is triggered. Event triggering is used for
UL measurement. The event 6B2 is triggered when
the measured value is lower than the absolute lower
threshold 6B2. When the event 6B2 is triggered, the
AMR speech rate should be raised. The measured
value is reported after it fulfills the conditions for
reporting and for the trigger time specified by this
parameter. The trigger time is used to prevent the
sudden change of the measured value for being
reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6A2

BSC690
0

Issue 01 (2014-04-30)

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6A2 measurement condition
before the event 6A2 is triggered. Event triggering is
used for UL measurement. The event 6A2 is triggered
when the measured value is greater than the absolute

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

108

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

MOD
UCELL
QUALI
TYMEA
S

Description

upper threshold 6A2. When the event 6A2 is


triggered, the AMR speech rate is not raised. The
measured value is reported after it fulfills the
conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to
prevent the sudden change of the measured value for
being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6A2

BSC691
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6A2 measurement condition
before the event 6A2 is triggered. Event triggering is
used for UL measurement. The event 6A2 is triggered
when the measured value is greater than the absolute
upper threshold 6A2. When the event 6A2 is
triggered, the AMR speech rate is not raised. The
measured value is reported after it fulfills the
conditions for reporting and for the trigger time
specified by this parameter. The trigger time is used to
prevent the sudden change of the measured value for
being reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D320

UlAmrT
rigTime
6D

BSC690
0

ADD
UCELL
QUALI
TYMEA
S
MOD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6D measurement condition before
the event 6D is triggered. Event triggering is used for
UL measurement. The event 6D is triggered when the
measured value is greater than the absolute upper
threshold 6D. When the event 6D is triggered, the
AMR speech rate should be lowered. The measured
value is reported after it fulfills the conditions for
reporting and for the trigger time specified by this
parameter. The trigger time is used to prevent the
sudden change of the measured value for being
reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

109

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

D1280, D2560, D5000


Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D240
UlAmrT
rigTime
6D

BSC691
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

MOD
UCELL
QUALI
TYMEA
S

Meaning: Duration when the measured value of AMR


keeps fulfilling the 6D measurement condition before
the event 6D is triggered. Event triggering is used for
UL measurement. The event 6D is triggered when the
measured value is greater than the absolute upper
threshold 6D. When the event 6D is triggered, the
AMR speech rate should be lowered. The measured
value is reported after it fulfills the conditions for
reporting and for the trigger time specified by this
parameter. The trigger time is used to prevent the
sudden change of the measured value for being
reported.
GUI Value Range: D0, D10, D20, D40, D60, D80,
D100, D120, D160, D200, D240, D320, D640,
D1280, D2560, D5000
Unit: ms
Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
160, 200, 240, 320, 640, 1280, 2560, 5000
Default Value: D240

MaxUlT
xPowerf
orConv

BSC690
0

ADD
UCELL
CAC
MOD
UCELL
CAC

WRFD020101
WRFD020501

Admissi
on
Control
Open
Loop
Power
Control

Meaning: Maximum uplink transmit power for


conversational services. For the detailed information
about the related Maximum allowed UL TX power IE,
see 3GPP TS 25.331.
GUI Value Range: -50~33
Unit: dBm
Actual Value Range: -50~33
Default Value: 24

MaxUlT
xPowerf
orConv

BSC691
0

ADD
UCELL
CAC
MOD
UCELL
CAC

WRFD020101
WRFD020501

Admissi
on
Control
Open
Loop
Power
Control

Meaning: Maximum uplink transmit power for


conversational services. For the detailed information
about the related Maximum allowed UL TX power IE,
see 3GPP TS 25.331.
GUI Value Range: -50~33
Unit: dBm
Actual Value Range: -50~33
Default Value: 24

UlThd6
A1

BSC690
0

Issue 01 (2014-04-30)

ADD
UTYPR
ABQUA

WRFD021101
WRFD-

Dynami
c
Channel

Meaning: Relative threshold for event 6A1. Event


6A1 is reported when the absolute threshold for event
6A1 is exceeded. Once the event is reported,

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

110

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

11 Parameters

MML
Comma
nd

Feature
ID

Feature
Name

Description

LITYM
EAS

020309

Configu
ration
Control
(DCCC)

operations related to the QoS control algorithm will be


triggered in the uplink.The following formula is used
to calculate the absolute threshold for event 6A1:
Absolute threshold for event 6A1 = Maximum uplink
transmit power - Relative threshold for event 6A1.

MOD
UTYPR
ABQUA
LITYM
EAS

WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS

GUI Value Range: 0~82


Unit: dB
Actual Value Range: 0~82
Default Value: None

AMR/W
B-AMR
Speech
Rates
Control
UlThd6
A1

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Relative threshold for event 6A1. Event


6A1 is reported when the absolute threshold for event
6A1 is exceeded. Once the event is reported,
operations related to the QoS control algorithm will be
triggered in the uplink.The following formula is used
to calculate the absolute threshold for event 6A1:
Absolute threshold for event 6A1 = Maximum uplink
transmit power - Relative threshold for event 6A1.
GUI Value Range: 0~82
Unit: dB
Actual Value Range: 0~82
Default Value: None

AMR/W
B-AMR
Speech
Rates
Control
UlThd6
B1

BSC690
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR

Issue 01 (2014-04-30)

Meaning: Relative threshold for event 6B1. Event 6B1


is reported when the UEs' transmit power is lower
than the absolute threshold for event 6B1. Once the
event is reported, operations related to the QoS control
algorithm will be stopped in the uplink. The following
formula is used to calculate the absolute threshold for
event 6B1: Absolute threshold for event 6B1 =
Maximum uplink transmit power - Relative threshold
for event 6B1.
GUI Value Range: 0~82
Unit: dB
Actual Value Range: 0~82
Default Value: None

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

111

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Speech
Rates
Control
UlThd6
B1

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

UlThd6
A2

BSC690
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

UlThd6
A2

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA

Issue 01 (2014-04-30)

WRFD021101
WRFD020309
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS

WRFD021101
WRFD020309
WRFD020701

WRFD020309
WRFD020701

GUI Value Range: 0~82


Unit: dB
Actual Value Range: 0~82

AMR/W
B-AMR
Speech
Rates
Control

Default Value: None

Dynami
c
Channel
Configu
ration
Control
(DCCC)

Meaning: Relative threshold for event 6A2. Event


6A2 is reported when the absolute threshold for event
6A2 is exceeded. Once the event is reported, the RNC
is not allowed to increase the data rates of UEs
processing AMR or BE services. The following
formula is used to calculate the absolute threshold for
event 6A2: Absolute threshold for event 6A2 =
Maximum uplink transmit power - Relative threshold
for event 6A2.

Inter-R
AT
Handov
er Based
on DL
QoS

WRFD021101

Meaning: Relative threshold for event 6B1. Event 6B1


is reported when the UEs' transmit power is lower
than the absolute threshold for event 6B1. Once the
event is reported, operations related to the QoS control
algorithm will be stopped in the uplink. The following
formula is used to calculate the absolute threshold for
event 6B1: Absolute threshold for event 6B1 =
Maximum uplink transmit power - Relative threshold
for event 6B1.

GUI Value Range: 0~82


Unit: dB
Actual Value Range: 0~82

AMR/W
B-AMR
Speech
Rates
Control

Default Value: 8

Dynami
c
Channel
Configu
ration
Control
(DCCC)

Meaning: Relative threshold for event 6A2. Event


6A2 is reported when the absolute threshold for event
6A2 is exceeded. Once the event is reported, the RNC
is not allowed to increase the data rates of UEs
processing AMR or BE services. The following
formula is used to calculate the absolute threshold for
event 6A2: Absolute threshold for event 6A2 =
Maximum uplink transmit power - Relative threshold

Inter-R

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

112

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

LITYM
EAS

UlThd6
B2

BSC690
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

UlThd6
B2

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

RlMaxD

BSC690

Issue 01 (2014-04-30)

ADD

WRFD021101
WRFD020309
WRFD020701

11 Parameters

Feature
Name

Description

AT
Handov
er Based
on DL
QoS

for event 6A2.

AMR/W
B-AMR
Speech
Rates
Control

Default Value: 8

Dynami
c
Channel
Configu
ration
Control
(DCCC)

Meaning: Relative threshold for event 6B2. Event 6B2


is reported when the UEs' transmit power is lower
than the absolute threshold for event 6B2. Once the
event is reported, the RNC is allowed to increase the
data rates of UEs processing AMR or BE services.
The following formula is used to calculate the
absolute threshold for event 6B2: Absolute threshold
for event 6B2 = Maximum uplink transmit power Relative threshold for event 6B2.

Inter-R
AT
Handov
er Based
on DL
QoS

WRFD021101
WRFD020309
WRFD020701

Unit: dB
Actual Value Range: 0~82

GUI Value Range: 0~82


Unit: dB
Actual Value Range: 0~82

AMR/W
B-AMR
Speech
Rates
Control

Default Value: 8

Dynami
c
Channel
Configu
ration
Control
(DCCC)

Meaning: Relative threshold for event 6B2. Event 6B2


is reported when the UEs' transmit power is lower
than the absolute threshold for event 6B2. Once the
event is reported, the RNC is allowed to increase the
data rates of UEs processing AMR or BE services.
The following formula is used to calculate the
absolute threshold for event 6B2: Absolute threshold
for event 6B2 = Maximum uplink transmit power Relative threshold for event 6B2.

Inter-R
AT
Handov
er Based
on DL
QoS

WRFD-

GUI Value Range: 0~82

GUI Value Range: 0~82


Unit: dB
Actual Value Range: 0~82

AMR/W
B-AMR
Speech
Rates
Control

Default Value: 8

Voice

Meaning: Maximum transmit power of a downlink

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

113

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

lPwr

UCELL
RLPWR

140205

Service
Experie
nce
Improve
ment for
Weak
Receptio
n Ues

radio link. For details about this parameter, see 3GPP


TS 25.433.

MOD
UCELL
RLPWR

WRFD020501

GUI Value Range: -350~150


Unit: 0.1dB
Actual Value Range: -35~15
Default Value: None

Open
Loop
Power
Control
RlMaxD
lPwr

BSC691
0

ADD
UCELL
RLPWR
MOD
UCELL
RLPWR

WRFD140205
WRFD020501

Voice
Service
Experie
nce
Improve
ment for
Weak
Receptio
n Ues

Meaning: Maximum transmit power of a downlink


radio link. For details about this parameter, see 3GPP
TS 25.433.
GUI Value Range: -350~150
Unit: 0.1dB
Actual Value Range: -35~15
Default Value: None

Open
Loop
Power
Control
DlThdE
1

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold E1 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is higher than the upper
threshold E1, AMRC lowers the DL AMR speech rate
by one level. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 0~559
Unit: 0.1dB
Actual Value Range: 0~55.9
Default Value: 20

DlThdE
1

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold E1 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is higher than the upper
threshold E1, AMRC lowers the DL AMR speech rate
by one level. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 0~559

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

114

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Unit: 0.1dB
Actual Value Range: 0~55.9
Default Value: 20
DlThdE
2

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold E2 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is lower than the upper
threshold E2, AMRC stops adjusting the DL AMR
speech rate. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 0~559
Unit: 0.1dB
Actual Value Range: 0~55.9
Default Value: 20

DlThdE
2

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold E2 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is lower than the upper
threshold E2, AMRC stops adjusting the DL AMR
speech rate. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 0~559
Unit: 0.1dB
Actual Value Range: 0~55.9
Default Value: 20

DlThdF
1

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold F1 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is lower than the lower
threshold F1, AMRC raises the DL AMR speech rate
by one level. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 1~560
Unit: 0.1dB
Actual Value Range: 0.1~56
Default Value: 90

DlThdF
1

BSC691
0

Issue 01 (2014-04-30)

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates

Meaning: Threshold F1 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is lower than the lower
threshold F1, AMRC raises the DL AMR speech rate

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

115

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Control

by one level. This parameter specifies the relative


threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 1~560
Unit: 0.1dB
Actual Value Range: 0.1~56
Default Value: 90

DlThdF
2

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold F2 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is higher than the lower
threshold F2, AMRC stops adjusting the DL AMR
speech rate. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 1~560
Unit: 0.1dB
Actual Value Range: 0.1~56
Default Value: 90

DlThdF
2

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Threshold F2 of DL AMR speech rate


adjustment. Periodical reporting is used for DL
measurement. When the value calculated on the basis
of the measurement report is higher than the lower
threshold F2, AMRC stops adjusting the DL AMR
speech rate. This parameter specifies the relative
threshold. The absolute threshold is equal to the
maximum DL TX power minus the relative threshold.
GUI Value Range: 1~560
Unit: 0.1dB
Actual Value Range: 0.1~56
Default Value: 90

DlAmrT
rigTime
E

BSC690
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020309
WRFD020701

MOD
UCELL
QUALI
TYMEA
S
DlAmrT
rigTime

BSC691
0

Issue 01 (2014-04-30)

ADD
UCELL

WRFD020309

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Duration from when the AMR TX power is


beyond the threshold Ea or below the threshold Eb to
when the event Ea or Eb is triggered. This parameter
is used to avoid faulty reporting due to instability of
power.

AMR/W
B-AMR
Speech
Rates
Control

Unit: 10ms

Inter-R
AT

Meaning: Duration from when the AMR TX power is


beyond the threshold Ea or below the threshold Eb to

GUI Value Range: 1~6000


Actual Value Range: 10~60000
Default Value: 64

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

116

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

QUALI
TYMEA
S

WRFD020701

Handov
er Based
on DL
QoS

when the event Ea or Eb is triggered. This parameter


is used to avoid faulty reporting due to instability of
power.

AMR/W
B-AMR
Speech
Rates
Control

Unit: 10ms

Inner
Loop
Power
Control

Meaning: Transmit power offset of pilot bits to data


bits in every timeslot for a downlink DPCCH frame.
For details about this parameter, see 3GPP TS 25.214.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.

MOD
UCELL
QUALI
TYMEA
S
PilotPo

BSC690
0

11 Parameters

SET
UFRC

WRFD020504

GUI Value Range: 1~6000


Actual Value Range: 10~60000
Default Value: 64

GUI Value Range: 0~24


Unit: 0.25dB
Actual Value Range: 0~6
Default Value: 12
PilotPo

BSC691
0

SET
UFRC

WRFD020504

Inner
Loop
Power
Control

Meaning: Transmit power offset of pilot bits to data


bits in every timeslot for a downlink DPCCH frame.
For details about this parameter, see 3GPP TS 25.214.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.
GUI Value Range: 0~24
Unit: 0.25dB
Actual Value Range: 0~6
Default Value: 12

ThdEa

BSC690
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020304
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Relative threshold for event Ea. Event Ea is


reported when the absolute threshold for event Ea is
exceeded. Once the event is reported, operations
related to the QoS control algorithm will be triggered
in the downlink. The following formula is used to
calculate the absolute threshold for event Ea: Absolute
threshold for event Ea = Maximum downlink transmit
power for RLs - Relative threshold for event Ea.
GUI Value Range: 0~56
Unit: 0.5dB
Actual Value Range: 0~28
Default Value: None

Inter
Frequen
cy Hard

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

117

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control
ThdEa

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020304
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Relative threshold for event Ea. Event Ea is


reported when the absolute threshold for event Ea is
exceeded. Once the event is reported, operations
related to the QoS control algorithm will be triggered
in the downlink. The following formula is used to
calculate the absolute threshold for event Ea: Absolute
threshold for event Ea = Maximum downlink transmit
power for RLs - Relative threshold for event Ea.
GUI Value Range: 0~56
Unit: 0.5dB
Actual Value Range: 0~28
Default Value: None

Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control
ThdEb

BSC690
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020304
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS
Inter

Issue 01 (2014-04-30)

Meaning: Relative threshold for event Eb. Event Eb is


reported when the downlink code transmit power is
lower than the absolute threshold for event Eb. Once
the event is reported, operations related to the QoS
control algorithm will be stopped in the downlink. The
following formula is used to calculate the absolute
threshold for event Eb: Absolute threshold for event
Eb = Maximum downlink transmit power for RLs Relative threshold for event Eb.
GUI Value Range: 0~56
Unit: 0.5dB
Actual Value Range: 0~28
Default Value: None

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

118

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Frequen
cy Hard
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control
ThdEb

BSC691
0

ADD
UTYPR
ABQUA
LITYM
EAS
MOD
UTYPR
ABQUA
LITYM
EAS

WRFD021101
WRFD020309
WRFD020304
WRFD020701

Dynami
c
Channel
Configu
ration
Control
(DCCC)
Inter-R
AT
Handov
er Based
on DL
QoS
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS

Meaning: Relative threshold for event Eb. Event Eb is


reported when the downlink code transmit power is
lower than the absolute threshold for event Eb. Once
the event is reported, operations related to the QoS
control algorithm will be stopped in the downlink. The
following formula is used to calculate the absolute
threshold for event Eb: Absolute threshold for event
Eb = Maximum downlink transmit power for RLs Relative threshold for event Eb.
GUI Value Range: 0~56
Unit: 0.5dB
Actual Value Range: 0~28
Default Value: None

AMR/W
B-AMR
Speech
Rates
Control
ChoiceR
ptUnitF
orAmrE

BSC690
0

ADD
UCELL
QUALI
TYMEA
S
MOD
UCELL
QUALI
TYMEA
S

Issue 01 (2014-04-30)

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: This parameter specifies the reporting


period of the event E of the AMR service. The unit of
the reporting period can be 10 ms or minute.

AMR/W
B-AMR
Speech
Rates
Control

Actual Value Range: TEN_MSEC, MIN

GUI Value Range: TEN_MSEC, MIN


Unit: None
Default Value: TEN_MSEC

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

119

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

ChoiceR
ptUnitF
orAmrE

BSC691
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020309

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: This parameter specifies the reporting


period of the event E of the AMR service. The unit of
the reporting period can be 10 ms or minute.

AMR/W
B-AMR
Speech
Rates
Control

Actual Value Range: TEN_MSEC, MIN

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: This parameter is valid when the


corresponding parameter related to the reporting
period unit for the event E of AMR service is set to
TEN_MSEC. The DL code TX power is reported
periodically after the event Ea is reported. This
parameter specifies the reporting period. If the
parameter is set to A, the reporting period is A x 10
ms.

WRFD020701

MOD
UCELL
QUALI
TYMEA
S
TenMse
cForAm
rE

BSC690
0

ADD
UCELL
QUALI
TYMEA
S
MOD
UCELL
QUALI
TYMEA
S

WRFD020309
WRFD020304
WRFD020701

Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS

GUI Value Range: TEN_MSEC, MIN


Unit: None
Default Value: TEN_MSEC

GUI Value Range: 1~6000


Unit: 10ms
Actual Value Range: 10~60000
Default Value: 480

AMR/W
B-AMR
Speech
Rates
Control
TenMse
cForAm
rE

BSC691
0

ADD
UCELL
QUALI
TYMEA
S
MOD
UCELL
QUALI
TYMEA
S

WRFD020309
WRFD020304
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS

Meaning: This parameter is valid when the


corresponding parameter related to the reporting
period unit for the event E of AMR service is set to
TEN_MSEC. The DL code TX power is reported
periodically after the event Ea is reported. This
parameter specifies the reporting period. If the
parameter is set to A, the reporting period is A x 10
ms.
GUI Value Range: 1~6000
Unit: 10ms
Actual Value Range: 10~60000
Default Value: 480

AMR/W
B-AMR
Speech
Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

120

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

MinFor
AmrE

BSC690
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020309

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: This parameter is valid when the


corresponding parameter related to the reporting
period unit for the event E of AMR service is set to
MIN. The DL code TX power is reported periodically
after the event E1 is reported. This parameter specifies
the reporting period.

AMR/W
B-AMR
Speech
Rates
Control

GUI Value Range: 1~60

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: This parameter is valid when the


corresponding parameter related to the reporting
period unit for the event E of AMR service is set to
MIN. The DL code TX power is reported periodically
after the event E1 is reported. This parameter specifies
the reporting period.

AMR/W
B-AMR
Speech
Rates
Control

GUI Value Range: 1~60

Intra
Node B
Softer
Handov
er

Meaning: 1.
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH: Whether a handover to a target cell, whose
operator list has only common operators, is allowed
during an inter-PLMN handover. When this switch is
turned off and the operator list of the target cell has
only the common operators and the inter-PLMN
handover switch is turned off, the handover to the
target cell is not allowed. When this switch is turned
on and the operator list of the target cell has only the
common operators and the inter-PLMN handover
switch is turned off, the handover to the target cell is
allowed. 2.
PERFENH_INITIAL_NCELLDETECT_SWITCH:
Whether to support missing neighboring cell detection
when no initial inter-frequency or inter-RAT
neighboring cells are configured. When this switch is
turned on and the inter-frequency and inter-RAT
missing neighboring cell detection switch is turned on
by running "ADD UCELLAUTONCELLDETECT",
the missing neighboring cell detection function in case
of no initial inter-frequency or inter-RAT neighboring
cells can be enabled. When this switch is turned off,
the missing neighboring cell detection function does
not take effect. 3.
PERFENH_VP_TO_AMR_SWITCH: Whether to
enable the Video Telephony Fallback to Speech

WRFD020701

MOD
UCELL
QUALI
TYMEA
S
MinFor
AmrE

BSC691
0

ADD
UCELL
QUALI
TYMEA
S

WRFD020309
WRFD020701

MOD
UCELL
QUALI
TYMEA
S
PerfEnh
anceSwi
tch3

BSC690
0

SET
UCORR
MPARA

WRFD020201
WRFD010510
WRFD020202
WRFD020103
WRFD140226
WRFD020203
WRFD150232
WRFD010202
WRFD020900
WRFD020402
WRFD020803
WRFD-

Issue 01 (2014-04-30)

3.4/6.8/1
3.6/27.2
Kbps
RRC
Connect
ion and
Radio
Access
Bearer
Establis
hment
and
Release
Intra
RNC
Soft
Handov
er
Inter
Frequen
cy Load

Unit: min
Actual Value Range: 1~60
Default Value: None

Unit: min
Actual Value Range: 1~60
Default Value: None

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

121

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

020302

Balance

WRFD020303

Fast
Return
from
UMTS
to LTE

(AMR) for Inter-RAT HO function. When this switch


is turned on, VP services fall back to speech (AMR)
before inter-RAT handovers are performed. When this
switch is turned off, VP services do not fall back to
speech (AMR) and inter-RAT handovers are directly
performed. 4.
PERFENH_AMRC_TFI_CMP_SWITCH: TFI
configuration method carried in the RRC_TFC_CTRL
message for the uplink Adaptive Multi-rate Control
(AMRC) rate adjustment. When this switch is turned
on and the uplink rate is adjusted with AMRC, the
RRC_TFC_CTRL message carries the maximum data
rate mode and all available data rate modes under the
maximum data rate mode. When this switch is turned
off and the uplink rate is adjusted with AMRC, the
RRC_TFC_CTRL message carries only the 0 kbit/s
data rate mode, SID rate mode, and maximum rate
mode. 5. PERFENH_MR_AGPS_CMP_SWITCH:
How the MR AGPS measurement control message is
released. When this switch is turned on, in the MR
AGPS measurement control message, the RNC
defines the IE "Measurement validity" as "all states".
When this switch is turned off, in the MR AGPS
measurement control message, the RNC defines the
information element (IE) "Measurement validity" as
"CELL_DCH". However, as specified in 3GPP TS
25.331, if the IE "Measurement validity" is defined as
"CELL_DCH", some UEs buffer MR AGPS
measurements when they transit from CELL_DCH to
CELL_FACH, CELL_PCH, or URA_PCH. Then, the
UEs resume the measurements after they switch back
to CELL_DCH. If a UE on a network resets
unexpectedly after the UE resumes MR AGPS
measurements, it is recommended that this switch be
turned on. 6. PERFENH_AMRC_NACK_SWITCH:
Whether the RNC responds to rate adjustment
requests from the core network when AMRC is
disabled. When this switch is turned off and AMRC is
disabled, the RNC does not respond to rate adjustment
requests from the core network. When this switch is
turned on and AMRC is disabled, the RNC sends to
the core network a rate adjustment failure message
after receiving rate adjustment requests from the core
network. 7. PERFENH_MCDRD_OPT_SWITCH:
Whether the RNC allows UEs to perform
blind-handover-based DRDs after the current cell
resource admission fails when the measurement-based
DRD function is enabled and DRDs are not allowed in
a non-periodic retry procedure such as RAB setup,
RAB modification, DCCC channel reconfiguration, or
P2D. When this switch is turned on, the RNC allows

WRFD020701
WRFD020307

Inter
RNC
Soft
Handov
er
Multiba
nd
Direct
Retry
Based
on UE
Location
UE
State in
Connect
ed Mode
(CELLDCH,
CELL-P
CH,
URA-P
CH,
CELL-F
ACH)
Logical
Channel
Manage
ment
Measure
ment
Based
Direct
Retry
A-GPS
Based
LCS
Inter
Frequen
cy Hard
Handov
er Based
on
Coverag

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

122

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

UEs to perform blind-handover-based DRDs. When


this switch is turned off, the RNC does not allow UEs
to perform blind-handover-based DRDs. 8.
PERFENH_MCDRD_MEAS_OPT_SWITCH:
Whether to enable the optimized inter-frequency
measurement control function in the
measurement-based DRD. When this switch is turned
on, the RNC filters out inter-frequency neighboring
cells that do not meet the requirements for periodic
retry according to the HSPA+ and SPG priorities
during the delivery of measurement control messages.
When this switch is turned off, the RNC does not filter
out inter-frequency neighboring cells that do not meet
the requirements. 9.
PERFENH_UE_LOC_DRD_OPT_SWITCH:
Whether the RNC filters DRD cells in high frequency
bands if the current cell is in a low frequency band
and the RSCP value cannot be measured or cannot be
obtained through measurements or it expires the
validity of measurement reports when the
location-based multiband DRD algorithm is enabled.
When this switch is turned off, the RNC filters out all
DRD cells in high frequency bands. When this switch
is turned on, the RNC does not filter DRD cells in
high frequency bands. 10.
PERFENH_PS_FAST_RETURN_LTE_SWITCH:
Whether the RNC releases the RRC connection when
a CS fallback UE keeps a PS connection after
terminating a call. When this switch is turned on, the
RNC releases the RRC connection by sending to a UE
an RRC CONNECTION RELEASE message that
carries the information about LTE frequencies if the
UE keeps the PS connection after terminating the CS
service. When this switch is turned off, the RNC does
not release the RRC connection if a CS fallback UE
keeps the PS connection after terminating the CS
service. 11.
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH: Whether to reject access of any CS services to
the UMTS network. When this switch is turned off,
CS services normally access the UMTS network.
When this switch is turned on, the RNC performs
inter-RAT DRDs to transfer the narrowband AMR
services assigned by the CN through the CS domain to
the current best cell's neighboring GSM cells for blind
handovers. If the CN assigns other services through
the CS domain, the RNC directly rejects such
services. 12. PERFENH_INACTIVE_F2P_SWITCH:
Whether the UE inactivity-based F2P state transition
algorithm takes effect. F2P transition is short for the
transition from CELL_FACH to CELL_PCH or

Inter-R
AT
Handov
er Based
on
Coverag
e
AMR/W
B-AMR
Speech
Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

123

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

URA_PCH. If the RNC detects that all uplink and


downlink services of a UE in the CELL_FACH state
have no data to transmit within the period specified by
the "InactF2PStateTransTimer" parameter ("SET
UUESTATETRANSTIMER"), it triggers the F2P
state transition. When this switch is turned off, the UE
inactivity-based F2P state transition algorithm does
not take effect. When this switch is turned on, the UE
inactivity-based F2P state transition algorithm takes
effect and replaces the original event 4B-based state
transition algorithm. 13.
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH: Whether the RNC extends the narrowband uplink
AMRC rate set. When this switch is turned off, the
RNC does not extend the narrowband uplink AMRC
rate set, and the narrowband uplink AMRC rate set is
{initial rate, guaranteed rate, SID rate, 0 bit/s rate}.
When this switch is turned on, if the core network
assigns AMR rate set A and the rate set includes other
rates, except SID rate and 0 bit/s rate, the extended
rate set is determined in the following ways: If rate set
A contains less than or equal to four types of rates,
rate set A is considered as the extended rate set. If rate
set A contains more than four types of rates, the
intersection between the rate set A and the five types
of rates (4.75 kbit/s, 5.9 kbit/s, 7.4 kbit/s, 7.95kbit/s,
and 12.2 kbit/s) is considered as rate set B. In this
situation, if the rate set B contains less than or equal to
four types of rates, rate set B is considered as the
extended rate set. If rate set B contains more than four
types of rates, the extended rate set is generated after
the rate 7.95 kbit/s is deleted from rate set B. 14.
PERFENH_DC_USERNUM_LDB_OPT_SWITCH:
Whether non-flexible DC cells are ranked based on
the user number of a single cell during the load
balancing. When this switch is turned off, non-flexible
DC cells are ranked based on the user number of the
carrier group during the load balancing. When this
switch is turned on, non-flexible DC cells are ranked
based on the user number of a single cell during the
load balancing. 15.
PERFENH_DCH_TRCH_OPT_SWITCH: Whether
the RNC changes the contents of the information
elements (IEs) "UL-AddReconfTransChInformation"
and "rb-MappingInfo" in the RRC RB SETUP and
RRC RB RECFG messages. When the content of the
sub-IE "tfs-SignallingMode" in the IE
"DL-AddReconfTransChInformation" is the same as
that of the sub-IE "transportFormatSet" in the IE
"UL-AddReconfTransChInformation", the sub-IE
"tfs-SignallingMode" can be defined as

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

124

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

"SameAsULTrCH", which reduces the sizes of the


RRC RB SETUP and RRC RB RECFG messages.
When this switch is turned off, the RNC defines the IE
"LogicalChannelList" as "Configured" and the IE
"rlc-Size-List" as "allSizes". When this switch is
turned on, the RNC defines the IE
"LogicalChannelList" as "allSizes" and the sub-IE
"rlc-Size-List" in the IE "rb-MappingInfo" as
"Configured". The uplink TFS is the same as the
downlink TFS. 16.
PERFENH_RB_MAPPING_OPT_SWITCH:
Whether the RRC RB SETUP message contains the
information element (IE) "RB mapping info" if the
transport channel and rate of a signaling radio bearer
(SRB) remain unchanged. If the RRC SETUP REQ
message has contained the IE "RB mapping info", the
RRC RB SETUP message does not need to contain
the IE, which shortens the transmission delay of the
RRC RB SETUP message. When this switch is turned
off, in the preceding scenario, the RRC RB SETUP
message contains the IE. When this switch is turned
on, in the preceding scenario, the RRC RB SETUP
message does not contain the IE. 17.
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH: Whether the blacklisted cell list is carried in
the RRC CONNECTION RELEASE message during
a redirection to LTE. When this switch is turned on,
the blacklisted cell list is carried in the RRC
CONNECTION RELEASE message. When this
switch is turned off, the blacklisted cell list is not
carried in the RRC CONNECTION RELEASE
message. 18.
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH: Whether to check the quality of the target cell
when the serving cell in the active set changes because
uplink synchronization fails. When this switch is
turned on, the quality of the target cell is checked. If
the target cell is not out of synchronization, the quality
of the target cell is good and the serving cell is
changed. Otherwise, the quality of the target cell is not
good, the serving cell is not changed and the radio link
is not deleted. When this switch is turned off, the
serving cell is changed because uplink
synchronization fails, regardless of the quality of the
target cell. 19.
PERFENH_HO_SIGNAL_SCENE_CTRL: Whether
to allow single signaling handovers for RRC
connection setup request messages indicating that no
services are initiated. This switch is turned on based
on other establishment causes rather than the
following causes. The RNC considers that services

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

125

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

need to be set up when the Establishment cause


IE(3GPP TS 25.331) in the
RRC_RRC_CONNECT_REQ message is set to any
of the following values: Originating Conversational
Call, Originating Streaming Call, Originating
Interactive Call, Originating Background Call,
Originating Subscribed traffic Call, Terminating
Conversational Call, Terminating Streaming Call,
Terminating Interactive Call, Terminating
Background Call, Originating High Priority
Signalling, and Terminating High Priority Signalling.
When this switch is turned on, single signaling
handovers are not allowed for RRC connection setup
request messages indicating that no services are
initiated. When this switch is turned off, single
signaling handovers are allowed for all UEs. 20.
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H: Whether UEs under weak coverage in the
downlink can initiate DCCC-based rate increasing and
HSPA retries. If the RNC receives event 2D
measurement reports but does not receive similar
event 2F measurement reports, UEs are considered to
be under weak coverage in the downlink. When this
switch is turned on, UEs under weak coverage in the
downlink cannot initiate rate increasing after the timer
for starting compressed mode expires. When this
switch is turned off, UEs can directly initiate rate
increasing after the timer for starting compressed
mode expires. This parameter is currently not for use.
21.
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH: Whether the RNC immediately triggers
handovers upon receiving a periodic inter-frequency
or inter-RAT measurement report indicating that the
signal meets handover triggering requirements, when
the time delay for triggering handovers based on
periodical inter-frequency measurement
reports/periodical inter-RAT measurement reports is
set to 0. When this switch is turned on,
inter-frequency or inter-RAT handovers are triggered
immediately. When this switch is turned off,
inter-frequency or inter-RAT handovers are triggered
only after the timer (200 ms) for delaying in triggering
handovers expires. 22.
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH: Whether the coverage-based BE service E2D
algorithm is invalid for HSUPA 10 ms TTI users in
weak coverage. Under weak coverage, HSUPA 10 ms
TTI users do not switch from E-DCH to DCH in the
uplink when this switch is turned on, and HSUPA 10
ms TTI users can switch from E-DCH to DCH in the

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

126

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

uplink when this switch is turned off. 23.


PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH: Whether SRBs can be carried on the E-DCH
during the RRC connection setup when the NodeB
sends to the RNC through the private Iub interface a
messages indicating that a cell does not support
HSUPA due to the high DSP CPU load. When this
switch is turned on, the SRBs cannot be carried on the
E-DCH during the RRC connection setup. When this
switch is turned off, the SRBs can be carried on the
E-DCH during the RRC connection setup. 24.
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH: Whether SRBs can be carried on the HS-DSCH
during the RRC connection setup when the NodeB
sends to the RNC through the private Iub interface a
message indicating that a cell does not support
HSDPA due to high DSP CPU load. When this switch
is turned on, the SRBs cannot be carried on the
HS-DSCH during the RRC connection setup. When
this switch is turned off, the SRBs can be carried on
the HS-DSCH during the RRC connection setup. 25.
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH: Whether the services with a maximum uplink
data rate greater than 2048 kbit/s can be carried on the
E-DCH during the RAB setup when the NodeB sends
to the RNC through the private Iub interface a
message indicating that a cell does not support
HSUPA TTI 2 ms due to high DSP CPU load. When
this switch is turned on, the services can be carried on
the E-DCH in the uplink. When this switch is turned
off, the services cannot be carried on the E-DCH in
the uplink. 26.
PERFENH_OLPC_TBSIZE0_CMP_SWITCH:
Whether to enable the target SIR adjustment in OLPC
during the physical channel reconfiguration
procedure. When this switch is turned on, the target
SIR adjustment in OLPC is not enabled for frames if
the UE uses the following transport format (TF): TB
size is 0, TB number is not 0, and BetaD/BetaC is 0.
When this switch is turned off, the target SIR
adjustment in OLPC is enabled for frames if the UE
use the following TF: TB size is 0, TB number is not
0, and BetaD/BetaC is 0. 27.
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH:
When this switch is turned on, the message size
reduction function is enabled during
CELL_FACH-to-CELL_DCH or
CELL_PCH-to-CELL_DCH state transitions.When
this switch is turned off, the message size reduction
function is disabled during
CELL_FACH-to-CELL_DCH or

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

127

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CELL_PCH-to-CELL_DCH state transitions. 28.


PERFENH_DYC_INIBITRATE_MULTI_SWITCH:
Whether to enable the function of dynamically
allocating an initial bit rate when a UE has set up a PS
BE service and wants to set up a CS service. When
this switch is turned on, this function takes effect and
cooperates with the "BeInitBitrateTypeforCsPs"
parameter in the "SET UFRC" command. The RNC
checks whether the throughput rate of a UE's PS BE
service is lower than the bit rate specified by the
"BeInitBitrateTypeforCsPs" parameter when the UE
has set up the PS BE service and wants to set up a CS
service. If yes, the RNC allocates the specified bit rate
to the PS BE service. If not, the RNC does not switch
the PS BE service from a high-speed channel to a
low-speed channel or reduce the bit rate of the PS BE
service. When this switch is turned off, this function
does not take effect and the RNC directly allocates the
specified bit rate to the PS BE service. Note that this
function cannot change the downlink initial bit rate of
a PS BE service if the service is carried over the DCH
in the downlink. 29.
PERFENH_RLRESETUP_GUARANTEE_SWITCH:
Whether to allow for channel fallback during RL
reestablishment. When this switch is turned on, this
function takes effect and switches a single PS BE
service, the PS BE service in the AMR+PS BE
combined services, or PS BE combined services from
a higher-rate channel to a lower-rate channel when the
UE fails to be admitted to a cell due to resource
insufficiency. In the worst cases, the target channel
can be a 0 kbit/s DCH. 30.
PERFENH_RLRESETUP_PREEMPT_SWITCH:
Preemption switch for link reestablishment. When this
switch is turned on, the RNC allows
preemption-capable UEs to preempt cell resources
from low-priority UEs and from UEs that can be
preempted if cell resources are insufficient. When this
switch is turned off, the RNC terminals the current
procedure for problem UEs if cell resources are
insufficient. This function applies only to adaptive
multirate (AMR) services, PS BE services, and
AMR+PS BE combined services.
GUI Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

128

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,
PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,
PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

129

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Default Value:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH:0,PERFENH_INITIAL_NCELLDETECT_SWIT
CH:0,PERFENH_VP_TO_AMR_SWITCH:1,PERFE
NH_AMRC_TFI_CMP_SWITCH:0,PERFENH_MR_
AGPS_CMP_SWITCH:0,PERFENH_AMRC_NACK
_SWITCH:0,PERFENH_MCDRD_OPT_SWITCH:0,
PERFENH_MCDRD_MEAS_OPT_SWITCH:1,PER
FENH_UE_LOC_DRD_OPT_SWITCH:1,PERFENH
_PS_FAST_RETURN_LTE_SWITCH:0,PERFENH_
FORCE_AMR_INTER_RAT_OUT_SWITCH:0,PER
FENH_INACTIVE_F2P_SWITCH:0,PERFENH_NB
_AMRC_UL_RATESET_EXT_SWITCH:0,PERFEN
H_DC_USERNUM_LDB_OPT_SWITCH:0,PERFE
NH_DCH_TRCH_OPT_SWITCH:0,PERFENH_RB_
MAPPING_OPT_SWITCH:0,PERFENH_U2L_REDI
R_WITH_BLACK_CELL_SWITCH:1,PERFENH_U
L_RL_FAIL_SRV_CELL_CHG_SWITCH:0,PERFE
NH_HO_SIGNAL_SCENE_CTRL:0,PERFENH_PS_
CMTIMEOUT_UP_LIMIT_SWITCH:0,PERFENH_
SPEC_PRD_HHO_DELAY_TIME_SWITCH:0,PER
FENH_BASE_COV_BE_E2D_10MS_OFF_SWITC
H:0,PERFENH_RRC_CELL_HSUPA_CAP_CHG_S
WITCH:1,PERFENH_RRC_CELL_HSDPA_CAP_C
HG_SWITCH:1,PERFENH_CELL_TTI2MS_CAP_C
HG_OPT_SWITCH:1,PERFENH_OLPC_TBSIZE0_
CMP_SWITCH:0,PERFENH_UU_P2D_F2D_MSG_
OPT_SWITCH:0,PERFENH_DYC_INIBITRATE_M
ULTI_SWITCH:0,PERFENH_RLRESETUP_GUAR
ANTEE_SWITCH:0,PERFENH_RLRESETUP_PRE

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

130

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

EMPT_SWITCH:0
PerfEnh
anceSwi
tch3

BSC691
0

SET
UCORR
MPARA

WRFD020201
WRFD010510
WRFD020202
WRFD020103
WRFD140226
WRFD020203
WRFD150232
WRFD010202
WRFD020900
WRFD020402
WRFD020803
WRFD020302
WRFD020303
WRFD020701
WRFD020307

Intra
Node B
Softer
Handov
er
3.4/6.8/1
3.6/27.2
Kbps
RRC
Connect
ion and
Radio
Access
Bearer
Establis
hment
and
Release
Intra
RNC
Soft
Handov
er
Inter
Frequen
cy Load
Balance
Fast
Return
from
UMTS
to LTE
Inter
RNC
Soft
Handov
er
Multiba
nd
Direct
Retry
Based
on UE
Location
UE
State in
Connect

Issue 01 (2014-04-30)

Meaning: 1.
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH: Whether a handover to a target cell, whose
operator list has only common operators, is allowed
during an inter-PLMN handover. When this switch is
turned off and the operator list of the target cell has
only the common operators and the inter-PLMN
handover switch is turned off, the handover to the
target cell is not allowed. When this switch is turned
on and the operator list of the target cell has only the
common operators and the inter-PLMN handover
switch is turned off, the handover to the target cell is
allowed. 2.
PERFENH_INITIAL_NCELLDETECT_SWITCH:
Whether to support missing neighboring cell detection
when no initial inter-frequency or inter-RAT
neighboring cells are configured. When this switch is
turned on and the inter-frequency and inter-RAT
missing neighboring cell detection switch is turned on
by running "ADD UCELLAUTONCELLDETECT",
the missing neighboring cell detection function in case
of no initial inter-frequency or inter-RAT neighboring
cells can be enabled. When this switch is turned off,
the missing neighboring cell detection function does
not take effect. 3.
PERFENH_VP_TO_AMR_SWITCH: Whether to
enable the Video Telephony Fallback to Speech
(AMR) for Inter-RAT HO function. When this switch
is turned on, VP services fall back to speech (AMR)
before inter-RAT handovers are performed. When this
switch is turned off, VP services do not fall back to
speech (AMR) and inter-RAT handovers are directly
performed. 4.
PERFENH_AMRC_TFI_CMP_SWITCH: TFI
configuration method carried in the RRC_TFC_CTRL
message for the uplink Adaptive Multi-rate Control
(AMRC) rate adjustment. When this switch is turned
on and the uplink rate is adjusted with AMRC, the
RRC_TFC_CTRL message carries the maximum data
rate mode and all available data rate modes under the
maximum data rate mode. When this switch is turned
off and the uplink rate is adjusted with AMRC, the
RRC_TFC_CTRL message carries only the 0 kbit/s
data rate mode, SID rate mode, and maximum rate
mode. 5. PERFENH_MR_AGPS_CMP_SWITCH:
How the MR AGPS measurement control message is
released. When this switch is turned on, in the MR
AGPS measurement control message, the RNC
defines the IE "Measurement validity" as "all states".

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

131

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

ed Mode
(CELLDCH,
CELL-P
CH,
URA-P
CH,
CELL-F
ACH)

When this switch is turned off, in the MR AGPS


measurement control message, the RNC defines the
information element (IE) "Measurement validity" as
"CELL_DCH". However, as specified in 3GPP TS
25.331, if the IE "Measurement validity" is defined as
"CELL_DCH", some UEs buffer MR AGPS
measurements when they transit from CELL_DCH to
CELL_FACH, CELL_PCH, or URA_PCH. Then, the
UEs resume the measurements after they switch back
to CELL_DCH. If a UE on a network resets
unexpectedly after the UE resumes MR AGPS
measurements, it is recommended that this switch be
turned on. 6. PERFENH_AMRC_NACK_SWITCH:
Whether the RNC responds to rate adjustment
requests from the core network when AMRC is
disabled. When this switch is turned off and AMRC is
disabled, the RNC does not respond to rate adjustment
requests from the core network. When this switch is
turned on and AMRC is disabled, the RNC sends to
the core network a rate adjustment failure message
after receiving rate adjustment requests from the core
network. 7. PERFENH_MCDRD_OPT_SWITCH:
Whether the RNC allows UEs to perform
blind-handover-based DRDs after the current cell
resource admission fails when the measurement-based
DRD function is enabled and DRDs are not allowed in
a non-periodic retry procedure such as RAB setup,
RAB modification, DCCC channel reconfiguration, or
P2D. When this switch is turned on, the RNC allows
UEs to perform blind-handover-based DRDs. When
this switch is turned off, the RNC does not allow UEs
to perform blind-handover-based DRDs. 8.
PERFENH_MCDRD_MEAS_OPT_SWITCH:
Whether to enable the optimized inter-frequency
measurement control function in the
measurement-based DRD. When this switch is turned
on, the RNC filters out inter-frequency neighboring
cells that do not meet the requirements for periodic
retry according to the HSPA+ and SPG priorities
during the delivery of measurement control messages.
When this switch is turned off, the RNC does not filter
out inter-frequency neighboring cells that do not meet
the requirements. 9.
PERFENH_UE_LOC_DRD_OPT_SWITCH:
Whether the RNC filters DRD cells in high frequency
bands if the current cell is in a low frequency band
and the RSCP value cannot be measured or cannot be
obtained through measurements or it expires the
validity of measurement reports when the
location-based multiband DRD algorithm is enabled.
When this switch is turned off, the RNC filters out all

Logical
Channel
Manage
ment
Measure
ment
Based
Direct
Retry
A-GPS
Based
LCS
Inter
Frequen
cy Hard
Handov
er Based
on
Coverag
e
Inter-R
AT
Handov
er Based
on
Coverag
e
AMR/W
B-AMR
Speech
Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

132

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

DRD cells in high frequency bands. When this switch


is turned on, the RNC does not filter DRD cells in
high frequency bands. 10.
PERFENH_PS_FAST_RETURN_LTE_SWITCH:
Whether the RNC releases the RRC connection when
a CS fallback UE keeps a PS connection after
terminating a call. When this switch is turned on, the
RNC releases the RRC connection by sending to a UE
an RRC CONNECTION RELEASE message that
carries the information about LTE frequencies if the
UE keeps the PS connection after terminating the CS
service. When this switch is turned off, the RNC does
not release the RRC connection if a CS fallback UE
keeps the PS connection after terminating the CS
service. 11.
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH: Whether to reject access of any CS services to
the UMTS network. When this switch is turned off,
CS services normally access the UMTS network.
When this switch is turned on, the RNC performs
inter-RAT DRDs to transfer the narrowband AMR
services assigned by the CN through the CS domain to
the current best cell's neighboring GSM cells for blind
handovers. If the CN assigns other services through
the CS domain, the RNC directly rejects such
services. 12. PERFENH_INACTIVE_F2P_SWITCH:
Whether the UE inactivity-based F2P state transition
algorithm takes effect. F2P transition is short for the
transition from CELL_FACH to CELL_PCH or
URA_PCH. If the RNC detects that all uplink and
downlink services of a UE in the CELL_FACH state
have no data to transmit within the period specified by
the "InactF2PStateTransTimer" parameter ("SET
UUESTATETRANSTIMER"), it triggers the F2P
state transition. When this switch is turned off, the UE
inactivity-based F2P state transition algorithm does
not take effect. When this switch is turned on, the UE
inactivity-based F2P state transition algorithm takes
effect and replaces the original event 4B-based state
transition algorithm. 13.
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH: Whether the RNC extends the narrowband uplink
AMRC rate set. When this switch is turned off, the
RNC does not extend the narrowband uplink AMRC
rate set, and the narrowband uplink AMRC rate set is
{initial rate, guaranteed rate, SID rate, 0 bit/s rate}.
When this switch is turned on, if the core network
assigns AMR rate set A and the rate set includes other
rates, except SID rate and 0 bit/s rate, the extended
rate set is determined in the following ways: If rate set
A contains less than or equal to four types of rates,

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

133

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

rate set A is considered as the extended rate set. If rate


set A contains more than four types of rates, the
intersection between the rate set A and the five types
of rates (4.75 kbit/s, 5.9 kbit/s, 7.4 kbit/s, 7.95kbit/s,
and 12.2 kbit/s) is considered as rate set B. In this
situation, if the rate set B contains less than or equal to
four types of rates, rate set B is considered as the
extended rate set. If rate set B contains more than four
types of rates, the extended rate set is generated after
the rate 7.95 kbit/s is deleted from rate set B. 14.
PERFENH_DC_USERNUM_LDB_OPT_SWITCH:
Whether non-flexible DC cells are ranked based on
the user number of a single cell during the load
balancing. When this switch is turned off, non-flexible
DC cells are ranked based on the user number of the
carrier group during the load balancing. When this
switch is turned on, non-flexible DC cells are ranked
based on the user number of a single cell during the
load balancing. 15.
PERFENH_DCH_TRCH_OPT_SWITCH: Whether
the RNC changes the contents of the information
elements (IEs) "UL-AddReconfTransChInformation"
and "rb-MappingInfo" in the RRC RB SETUP and
RRC RB RECFG messages. When the content of the
sub-IE "tfs-SignallingMode" in the IE
"DL-AddReconfTransChInformation" is the same as
that of the sub-IE "transportFormatSet" in the IE
"UL-AddReconfTransChInformation", the sub-IE
"tfs-SignallingMode" can be defined as
"SameAsULTrCH", which reduces the sizes of the
RRC RB SETUP and RRC RB RECFG messages.
When this switch is turned off, the RNC defines the IE
"LogicalChannelList" as "Configured" and the IE
"rlc-Size-List" as "allSizes". When this switch is
turned on, the RNC defines the IE
"LogicalChannelList" as "allSizes" and the sub-IE
"rlc-Size-List" in the IE "rb-MappingInfo" as
"Configured". The uplink TFS is the same as the
downlink TFS. 16.
PERFENH_RB_MAPPING_OPT_SWITCH:
Whether the RRC RB SETUP message contains the
information element (IE) "RB mapping info" if the
transport channel and rate of a signaling radio bearer
(SRB) remain unchanged. If the RRC SETUP REQ
message has contained the IE "RB mapping info", the
RRC RB SETUP message does not need to contain
the IE, which shortens the transmission delay of the
RRC RB SETUP message. When this switch is turned
off, in the preceding scenario, the RRC RB SETUP
message contains the IE. When this switch is turned
on, in the preceding scenario, the RRC RB SETUP

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

134

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

message does not contain the IE. 17.


PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH: Whether the blacklisted cell list is carried in
the RRC CONNECTION RELEASE message during
a redirection to LTE. When this switch is turned on,
the blacklisted cell list is carried in the RRC
CONNECTION RELEASE message. When this
switch is turned off, the blacklisted cell list is not
carried in the RRC CONNECTION RELEASE
message. 18.
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH: Whether to check the quality of the target cell
when the serving cell in the active set changes because
uplink synchronization fails. When this switch is
turned on, the quality of the target cell is checked. If
the target cell is not out of synchronization, the quality
of the target cell is good and the serving cell is
changed. Otherwise, the quality of the target cell is not
good, the serving cell is not changed and the radio link
is not deleted. When this switch is turned off, the
serving cell is changed because uplink
synchronization fails, regardless of the quality of the
target cell. 19.
PERFENH_HO_SIGNAL_SCENE_CTRL: Whether
to allow single signaling handovers for RRC
connection setup request messages indicating that no
services are initiated. This switch is turned on based
on other establishment causes rather than the
following causes. The RNC considers that services
need to be set up when the Establishment cause
IE(3GPP TS 25.331) in the
RRC_RRC_CONNECT_REQ message is set to any
of the following values: Originating Conversational
Call, Originating Streaming Call, Originating
Interactive Call, Originating Background Call,
Originating Subscribed traffic Call, Terminating
Conversational Call, Terminating Streaming Call,
Terminating Interactive Call, Terminating
Background Call, Originating High Priority
Signalling, and Terminating High Priority Signalling.
When this switch is turned on, single signaling
handovers are not allowed for RRC connection setup
request messages indicating that no services are
initiated. When this switch is turned off, single
signaling handovers are allowed for all UEs. 20.
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H: Whether UEs under weak coverage in the
downlink can initiate DCCC-based rate increasing and
HSPA retries. If the RNC receives event 2D
measurement reports but does not receive similar
event 2F measurement reports, UEs are considered to

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

135

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

be under weak coverage in the downlink. When this


switch is turned on, UEs under weak coverage in the
downlink cannot initiate rate increasing after the timer
for starting compressed mode expires. When this
switch is turned off, UEs can directly initiate rate
increasing after the timer for starting compressed
mode expires. This parameter is currently not for use.
21.
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH: Whether the RNC immediately triggers
handovers upon receiving a periodic inter-frequency
or inter-RAT measurement report indicating that the
signal meets handover triggering requirements, when
the time delay for triggering handovers based on
periodical inter-frequency measurement
reports/periodical inter-RAT measurement reports is
set to 0. When this switch is turned on,
inter-frequency or inter-RAT handovers are triggered
immediately. When this switch is turned off,
inter-frequency or inter-RAT handovers are triggered
only after the timer (200 ms) for delaying in triggering
handovers expires. 22.
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH: Whether the coverage-based BE service E2D
algorithm is invalid for HSUPA 10 ms TTI users in
weak coverage. Under weak coverage, HSUPA 10 ms
TTI users do not switch from E-DCH to DCH in the
uplink when this switch is turned on, and HSUPA 10
ms TTI users can switch from E-DCH to DCH in the
uplink when this switch is turned off. 23.
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH: Whether SRBs can be carried on the E-DCH
during the RRC connection setup when the NodeB
sends to the RNC through the private Iub interface a
messages indicating that a cell does not support
HSUPA due to the high DSP CPU load. When this
switch is turned on, the SRBs cannot be carried on the
E-DCH during the RRC connection setup. When this
switch is turned off, the SRBs can be carried on the
E-DCH during the RRC connection setup. 24.
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH: Whether SRBs can be carried on the HS-DSCH
during the RRC connection setup when the NodeB
sends to the RNC through the private Iub interface a
message indicating that a cell does not support
HSDPA due to high DSP CPU load. When this switch
is turned on, the SRBs cannot be carried on the
HS-DSCH during the RRC connection setup. When
this switch is turned off, the SRBs can be carried on
the HS-DSCH during the RRC connection setup. 25.
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

136

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CH: Whether the services with a maximum uplink


data rate greater than 2048 kbit/s can be carried on the
E-DCH during the RAB setup when the NodeB sends
to the RNC through the private Iub interface a
message indicating that a cell does not support
HSUPA TTI 2 ms due to high DSP CPU load. When
this switch is turned on, the services can be carried on
the E-DCH in the uplink. When this switch is turned
off, the services cannot be carried on the E-DCH in
the uplink. 26.
PERFENH_OLPC_TBSIZE0_CMP_SWITCH:
Whether to enable the target SIR adjustment in OLPC
during the physical channel reconfiguration
procedure. When this switch is turned on, the target
SIR adjustment in OLPC is not enabled for frames if
the UE uses the following transport format (TF): TB
size is 0, TB number is not 0, and BetaD/BetaC is 0.
When this switch is turned off, the target SIR
adjustment in OLPC is enabled for frames if the UE
use the following TF: TB size is 0, TB number is not
0, and BetaD/BetaC is 0. 27.
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH:
When this switch is turned on, the message size
reduction function is enabled during
CELL_FACH-to-CELL_DCH or
CELL_PCH-to-CELL_DCH state transitions.When
this switch is turned off, the message size reduction
function is disabled during
CELL_FACH-to-CELL_DCH or
CELL_PCH-to-CELL_DCH state transitions. 28.
PERFENH_DYC_INIBITRATE_MULTI_SWITCH:
Whether to enable the function of dynamically
allocating an initial bit rate when a UE has set up a PS
BE service and wants to set up a CS service. When
this switch is turned on, this function takes effect and
cooperates with the "BeInitBitrateTypeforCsPs"
parameter in the "SET UFRC" command. The RNC
checks whether the throughput rate of a UE's PS BE
service is lower than the bit rate specified by the
"BeInitBitrateTypeforCsPs" parameter when the UE
has set up the PS BE service and wants to set up a CS
service. If yes, the RNC allocates the specified bit rate
to the PS BE service. If not, the RNC does not switch
the PS BE service from a high-speed channel to a
low-speed channel or reduce the bit rate of the PS BE
service. When this switch is turned off, this function
does not take effect and the RNC directly allocates the
specified bit rate to the PS BE service. Note that this
function cannot change the downlink initial bit rate of
a PS BE service if the service is carried over the DCH
in the downlink. 29.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

137

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_RLRESETUP_GUARANTEE_SWITCH:
Whether to allow for channel fallback during RL
reestablishment. When this switch is turned on, this
function takes effect and switches a single PS BE
service, the PS BE service in the AMR+PS BE
combined services, or PS BE combined services from
a higher-rate channel to a lower-rate channel when the
UE fails to be admitted to a cell due to resource
insufficiency. In the worst cases, the target channel
can be a 0 kbit/s DCH. 30.
PERFENH_RLRESETUP_PREEMPT_SWITCH:
Preemption switch for link reestablishment. When this
switch is turned on, the RNC allows
preemption-capable UEs to preempt cell resources
from low-priority UEs and from UEs that can be
preempted if cell resources are insufficient. When this
switch is turned off, the RNC terminals the current
procedure for problem UEs if cell resources are
insufficient. This function applies only to adaptive
multirate (AMR) services, PS BE services, and
AMR+PS BE combined services.
GUI Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,
PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,
PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

138

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,
PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,
PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Default Value:

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

139

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH:0,PERFENH_INITIAL_NCELLDETECT_SWIT
CH:0,PERFENH_VP_TO_AMR_SWITCH:1,PERFE
NH_AMRC_TFI_CMP_SWITCH:0,PERFENH_MR_
AGPS_CMP_SWITCH:0,PERFENH_AMRC_NACK
_SWITCH:0,PERFENH_MCDRD_OPT_SWITCH:0,
PERFENH_MCDRD_MEAS_OPT_SWITCH:1,PER
FENH_UE_LOC_DRD_OPT_SWITCH:1,PERFENH
_PS_FAST_RETURN_LTE_SWITCH:0,PERFENH_
FORCE_AMR_INTER_RAT_OUT_SWITCH:0,PER
FENH_INACTIVE_F2P_SWITCH:0,PERFENH_NB
_AMRC_UL_RATESET_EXT_SWITCH:0,PERFEN
H_DC_USERNUM_LDB_OPT_SWITCH:0,PERFE
NH_DCH_TRCH_OPT_SWITCH:0,PERFENH_RB_
MAPPING_OPT_SWITCH:0,PERFENH_U2L_REDI
R_WITH_BLACK_CELL_SWITCH:1,PERFENH_U
L_RL_FAIL_SRV_CELL_CHG_SWITCH:0,PERFE
NH_HO_SIGNAL_SCENE_CTRL:0,PERFENH_PS_
CMTIMEOUT_UP_LIMIT_SWITCH:0,PERFENH_
SPEC_PRD_HHO_DELAY_TIME_SWITCH:0,PER
FENH_BASE_COV_BE_E2D_10MS_OFF_SWITC
H:0,PERFENH_RRC_CELL_HSUPA_CAP_CHG_S
WITCH:1,PERFENH_RRC_CELL_HSDPA_CAP_C
HG_SWITCH:1,PERFENH_CELL_TTI2MS_CAP_C
HG_OPT_SWITCH:1,PERFENH_OLPC_TBSIZE0_
CMP_SWITCH:0,PERFENH_UU_P2D_F2D_MSG_
OPT_SWITCH:0,PERFENH_DYC_INIBITRATE_M
ULTI_SWITCH:0,PERFENH_RLRESETUP_GUAR
ANTEE_SWITCH:0,PERFENH_RLRESETUP_PRE
EMPT_SWITCH:0
GoldMa
xMode

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: If IUUP V1 is in use, the parameter


specifies the maximum uplink rate and maximum
downlink rate of narrowband AMR speech services
for gold users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for gold users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

140

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Actual Value Range: 4.75K, 5.15K, 5.90K, 6.70K,


7.40K, 7.95K, 10.20K, 12.20K
Default Value: NBAMR_BITRATE_12.20K
GoldMa
xMode

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: If IUUP V1 is in use, the parameter


specifies the maximum uplink rate and maximum
downlink rate of narrowband AMR speech services
for gold users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for gold users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s
Actual Value Range: 4.75K, 5.15K, 5.90K, 6.70K,
7.40K, 7.95K, 10.20K, 12.20K
Default Value: NBAMR_BITRATE_12.20K

SilverM
axMode

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: If IUUP V1 is in use, the parameter


specifies the maximum uplink rate and maximum
downlink rate of narrowband AMR speech services
for silver users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for silver users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s
Actual Value Range: 4.75, 5.15, 5.90, 6.70, 7.40, 7.95,
10.20, 12.20

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

141

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Default Value: NBAMR_BITRATE_12.20K


SilverM
axMode

BSC691
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: If IUUP V1 is in use, the parameter


specifies the maximum uplink rate and maximum
downlink rate of narrowband AMR speech services
for silver users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for silver users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s
Actual Value Range: 4.75, 5.15, 5.90, 6.70, 7.40, 7.95,
10.20, 12.20
Default Value: NBAMR_BITRATE_12.20K

Copper
MaxMo
de

BSC690
0

SET
UAMR
C

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: If IUUP V1 is in use, the parameter


specifies the maximum uplink rate and maximum
downlink rate of narrowband AMR speech services
for copper users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for copper users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s
Actual Value Range: 4.75, 5.15, 5.90, 6.70, 7.40, 7.95,
10.20, 12.20
Default Value: NBAMR_BITRATE_12.20K

Copper

BSC691

Issue 01 (2014-04-30)

SET

WRFD-

AMR/W

Meaning: If IUUP V1 is in use, the parameter

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

142

WCDMA RAN
AMR Feature Parameter Description

11 Parameters

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

MaxMo
de

UAMR
C

020701

B-AMR
Speech
Rates
Control

specifies the maximum uplink rate and maximum


downlink rate of narrowband AMR speech services
for copper users. If IUUP V2 is in use, the parameter
specifies the maximum uplink rate and maximum
initial downlink access rate of narrowband AMR
speech services for copper users. This parameter does
not take effect for incoming handover AMR speech
services or incoming static relocation AMR speech
services.
GUI Value Range: NBAMR_BITRATE_4.75K,
NBAMR_BITRATE_5.15K,
NBAMR_BITRATE_5.90K,
NBAMR_BITRATE_6.70K,
NBAMR_BITRATE_7.40K,
NBAMR_BITRATE_7.95K,
NBAMR_BITRATE_10.20K,
NBAMR_BITRATE_12.20K
Unit: kbit/s
Actual Value Range: 4.75, 5.15, 5.90, 6.70, 7.40, 7.95,
10.20, 12.20
Default Value: NBAMR_BITRATE_12.20K

WAmrS
uppInd

BSC690
0

ADD
UNRNC

WRFD010613

MOD
UNRNC

AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

Meaning: Whether the neighboring RNC supports


WB-AMR. If the neighboring RNC supports
WB-AMR, this parameter should be set to YES.
Under this circumstance, UE not involved relocations
to the neighboring RNC are allowed for UEs
performing WB-AMR services. If the neighboring
RNC does not support WB-AMR, this parameter
should be set to NO. Under this circumstance, UE
not involved relocations are not allowed for such UEs.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: YES

WAmrS
uppInd

BSC691
0

ADD
UNRNC
MOD
UNRNC

WRFD010613

AMR-W
B
(Adaptiv
e Multi
Rate
Wide
Band)

Meaning: Whether the neighboring RNC supports


WB-AMR. If the neighboring RNC supports
WB-AMR, this parameter should be set to YES.
Under this circumstance, UE not involved relocations
to the neighboring RNC are allowed for UEs
performing WB-AMR services. If the neighboring
RNC does not support WB-AMR, this parameter
should be set to NO. Under this circumstance, UE
not involved relocations are not allowed for such UEs.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

143

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Default Value: YES


UlQosA
mrAdjS
witch

BSC690
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

UlQosA
mrAdjS
witch

BSC691
0

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL
QoS
AMR/W
B-AMR
Speech
Rates
Control

DlQosA
mrAdjS
witch

BSC690
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Rate adjustment switch of link stability


control for UL QoS of AMR services. When the
parameter is set to YES, UL rate of AMR services can
be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Rate adjustment switch of link stability


control for UL QoS of AMR services. When the
parameter is set to YES, UL rate of AMR services can
be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Rate adjustment switch of link stability


control for DL QoS of AMR services. When the
parameter is set to YES, DL rate of AMR services can
be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

DlQosA
mrAdjS
witch

BSC691
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Rate adjustment switch of link stability


control for DL QoS of AMR services. When the
parameter is set to YES, DL rate of AMR services can
be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

UlQosW
AmrAdj
Switch

BSC690
0

Issue 01 (2014-04-30)

SET
UQOSA
CT

WRFD020309
WRFD020701

Inter-R
AT
Handov
er Based
on DL

Meaning: Rate adjustment switch of link stability


control for UL QoS of WAMR services. When the
parameter is set to YES, UL rate of WAMR services
can be adjusted.
GUI Value Range: NO, YES

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

144

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

UlQosW
AmrAdj
Switch

NE

BSC691
0

MML
Comma
nd

SET
UQOSA
CT

Feature
ID

WRFD020309
WRFD020701

11 Parameters

Feature
Name

Description

QoS

Unit: None

AMR/W
B-AMR
Speech
Rates
Control

Actual Value Range: NO, YES

Inter-R
AT
Handov
er Based
on DL
QoS

Meaning: Rate adjustment switch of link stability


control for UL QoS of WAMR services. When the
parameter is set to YES, UL rate of WAMR services
can be adjusted.

AMR/W
B-AMR
Speech
Rates
Control
DlQosW
AmrAdj
Switch

BSC690
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Default Value: NO

GUI Value Range: NO, YES


Unit: None
Actual Value Range: NO, YES
Default Value: NO

Meaning: Rate adjustment switch of link stability


control for DL QoS of WAMR services. When the
parameter is set to YES, DL rate of WAMR services
can be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

DlQosW
AmrAdj
Switch

BSC691
0

SET
UQOSA
CT

WRFD020701

AMR/W
B-AMR
Speech
Rates
Control

Meaning: Rate adjustment switch of link stability


control for DL QoS of WAMR services. When the
parameter is set to YES, DL rate of WAMR services
can be adjusted.
GUI Value Range: NO, YES
Unit: None
Actual Value Range: NO, YES
Default Value: NO

NBMLd
cAlgoS
witch

BSC690
0

Issue 01 (2014-04-30)

ADD
UCELL
ALGOS
WITCH

WRFD151203

MOD
UCELL
ALGOS
WITCH

WRFD150231

WRFD020106

Campin
g
Strategy
Switch
for Mass
Event

WRFD150219

Load
Reshuffl
ing

WRFD150216

RIM
Based

Meaning: Whether to enable the algorithms related to


cell load control. Selecting a switch enables the
corresponding algorithm and clearing a switch
disables the corresponding algorithm. 1.
INTRA_FREQUENCY_LDB: Whether to enable the
cell breathing algorithm. This algorithm adjusts
P-CPICH transmit power of a cell based on the
downlink TCP load to achieve load balancing between
intra-frequency cells. This algorithm automatically
becomes invalid when the load-based dynamic
P-CPICH transmit power adjustment algorithm
(controlled by the

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

145

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

WRFD150217

UMTS
Target
Cell
Selectio
n for
LTE

DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH
switch) takes effect. 2. PUC: Whether to enable the
Potential User Control (PUC) algorithm. This
algorithm adjusts cell selection and reselection
parameters based on the cell load to enable UEs to
reselect lightly loaded cells. 3. UL_UU_OLC:
Whether to enable the uplink overload control (OLC)
algorithm. When the uplink power is overloaded in a
cell, this algorithm alleviates the uplink load by using
quick transport format (TF) restriction, distributing
best effort (BE) service to common channels, or
releasing UEs. 4. DL_UU_OLC: Whether to enable
the downlink OLC algorithm. When the downlink
power is overloaded in a cell, this algorithm alleviates
the downlink load by using quick TF restriction,
distributing BE services to common channels,
releasing UEs, or reconfiguring the maximum transmit
power of FACHs. 5. UL_UU_LDR: Whether to
enable the uplink load reshuffling (LDR) algorithm.
When the uplink load is heavy in a cell, this algorithm
alleviates the uplink load by using load-based
inter-frequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, and AMR
service rate reduction. 6. DL_UU_LDR: Whether to
enable the downlink LDR algorithm. When the
downlink load is heavy in a cell, this algorithm
alleviates the downlink load by using load-based
inter-frequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, AMR service
rate reduction, and MBMS power restriction. 7.
OLC_EVENTMEAS: Whether to enable OLC event
measurement. 8. CELL_CODE_LDR: Whether to
enable cell code reshuffling algorithm. In the event of
code resource overuse, this algorithm alleviates the
code resource overuse by using BE service rate
reduction, code tree reshuffling, and load-based
inter-frequency handovers. 9. CELL_CREDIT_LDR:
Whether to enable the cell credit reshuffling
algorithm. In the event of cell credit overuse, this
algorithm alleviates the credit overuse by using
load-based inter-frequency handovers, BE service rate
reduction, uncontrollable real-time service QoS
renegotiation, and load-based CS/PS inter-RAT
handovers. 10. UL_INTRA_FREQUENCY_ULB:
Whether to enable RTWP-based intra-frequency load
balancing algorithm. This algorithm adjusts P-CPICH
transmit power of a cell based on the RTWP load to
achieve load balancing between intra-frequency cells.
This algorithm automatically becomes invalid when

WRFD150215
WRFD0106100
3
WRFD020102
WRFD140223
WRFD150236
WRFD020101
WRFD140226
WRFD020107
WRFD020104
WRFD020105
WRFD020126
WRFD0106120
2
WRFD020129
WRFD010626
WRFD010627
WRFD020103
WRFD010660
WRFD010661
WRFD010662
WRFD010663

Issue 01 (2014-04-30)

11 Parameters

Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Handov
er from
UMTS
to LTE
SRVCC
from
LTE to
UMTS
with PS
Handov
er
HSDPA
Admissi
on
Control
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
Load
Based

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

146

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

WRFD010665

Dynami
c
Adjustm
ent of
PCPICH

the load-based dynamic P-CPICH transmit power


adjustment algorithm (controlled by the
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH
switch) takes effect. 11. UL_UU_CLB: Whether to
enable the uplink load-based CLB algorithm. This
algorithm determines whether a cell enters the CLB
state by the uplink load on the air interface. If a cell is
in the CLB state, measurement-based inter-frequency
handovers are triggered periodically to achieve load
balancing between inter-frequency cells. 12.
DL_UU_CLB: Whether to enable the downlink
load-based CLB algorithm. This algorithm determines
whether a cell enters the CLB state by the downlink
load on the air interface. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 13.
CELL_CODE_CLB: Whether to enable code
resource-based CLB algorithm. This algorithm
determines whether a cell enters the CLB state by the
code resource usage. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 14.
CELL_CREDIT_CLB: Whether to enable
credit-based CLB algorithm. This algorithm
determines whether a cell enters the CLB state by the
credit resource usage. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 15.
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH:
Whether to enable downlink load-based dynamic
primary common pilot channel (P-CPICH) power
adjustment algorithm. This algorithm adjusts the
P-CPICH transmit power by the downlink non-HSPA
power load to reduce the downlink non-HSPA power
load. If this algorithm takes effect, other enabled
algorithms for intra-frequency load balancing (based
on TCP or RTWP) automatically become invalid. 16.
ADAPTIVE_RACH: Function switch for the adaptive
RACH feature. When this switch is turned on, this
feature is activated. In this case, the RNC adjusts the
random access parameters based on the random access
state and on the uplink power load of the target cell.
When this switch is turned off, this feature is
deactivated. 17. ACK_PRACH_PREAM_MEAS:
Whether to measure the number of acknowledged
PRACH preambles. When this switch is turned on, the
RNC measures the number of acknowledged PRACH
preambles. When this switch is turned off, the RNC

WRFD140102
WRFD0106600
4
WRFD0106160
6
WRFD0106600
2
WRFD0106600
3

Admissi
on
Control
Fast
Return
from
UMTS
to LTE
Overloa
d
Control

WRFD0106600
1

Intra
Frequen
cy Load
Balance

WRFD0106160
5

Potential
User
Control

WRFD150220

Mobility
Between
UMTS
and LTE
Phase 1

WRFD0106160
1
WRFD0106160
3
WRFD0106160
2
WRFD140217
WRFD0106160
4
WRFD010616
WRFD0106160
8
WRFD140218

Issue 01 (2014-04-30)

11 Parameters

HSUPA
Admissi
on
Control
PS
Service
Redirect
ion from
UMTS
to LTE
MBMS
FLC(Fre
quency
Layer
Converg
ence)/F
LD(Freq
uency
Layer
Dispersi

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

147

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

on)

does not measure the number of acknowledged


PRACH preambles. 18.
CAMPING_STRATEGY_SWITCH: Whether to
enable the camping policy switching function when
traffic is heavy. This is a function switch for the
function. When the switch is turned on, the camping
policy switching function is enabled if traffic is heavy
in the entire network. Then, the target cell is no longer
a preferred camping cell for the UE in question, but a
random camping cell.

FACH
Transmi
ssion
Sharing
for
MBMS
Inter
Frequen
cy Load
Balance
MBMS
Phase 2
MBMS
over Iur
Dynami
c Power
Estimati
on for
MTCH
MSCH
Scheduli
ng
MBMS
Channel
Audienc
e Rating
Statistic
s
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
Inter-Fre
quency
Neighbo
ring Cell
Selectio
n for
MBMS
PTP
Users

GUI Value Range: INTRA_FREQUENCY_LDB,


PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC,
DL_UU_OLC, OLC_EVENTMEAS,
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
Unit: None
Actual Value Range: INTRA_FREQUENCY_LDB,
PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC,
DL_UU_OLC, OLC_EVENTMEAS,
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
Default Value:
INTRA_FREQUENCY_LDB:0,PUC:0,UL_UU_LDR
:0,DL_UU_LDR:0,UL_UU_OLC:0,DL_UU_OLC:0,
OLC_EVENTMEAS:0,CELL_CODE_LDR:0,CELL_
CREDIT_LDR:0,UL_INTRA_FREQUENCY_ULB:0
,UL_UU_CLB:0,DL_UU_CLB:0,CELL_CODE_CLB
:0,CELL_CREDIT_CLB:0,DLLOAD_BASED_PCPI
CH_PWR_ADJ_SWITCH:0,ADAPTIVE_RACH:0,A
CK_PRACH_PREAM_MEAS:0,CAMPING_STRAT
EGY_SWITCH:0

Streami
ng

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

148

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Service
on
MBMS
MBMS
P2P
over
HSDPA
MBMS
Admissi
on
Enhance
ment
MBMS
Enhance
d
Broadca
st Mode
MBMS
Transpo
rt
Resourc
e
Manage
ment
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
Inter-Fre
quency
Load
Balancin
g Based
on
Configu

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

149

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

rable
Load
Threshol
d
MBMS
Soft/Sel
ective
Combini
ng
MBMS
Introduc
tion
Package
16/32/64
/128Kbp
s
Channel
Rate on
MBMS
ServiceBased
PS
Handov
er from
UMTS
to LTE
NBMLd
cAlgoS
witch

BSC691
0

ADD
UCELL
ALGOS
WITCH

WRFD151203

MOD
UCELL
ALGOS
WITCH

WRFD150231

WRFD020106

WRFD150219
WRFD150216
WRFD150217
WRFD150215
WRFD0106100
3
WRFD020102
WRFD-

Issue 01 (2014-04-30)

Campin
g
Strategy
Switch
for Mass
Event
Load
Reshuffl
ing
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Coverag
e Based
PS
Redirect
ion from

Meaning: Whether to enable the algorithms related to


cell load control. Selecting a switch enables the
corresponding algorithm and clearing a switch
disables the corresponding algorithm. 1.
INTRA_FREQUENCY_LDB: Whether to enable the
cell breathing algorithm. This algorithm adjusts
P-CPICH transmit power of a cell based on the
downlink TCP load to achieve load balancing between
intra-frequency cells. This algorithm automatically
becomes invalid when the load-based dynamic
P-CPICH transmit power adjustment algorithm
(controlled by the
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH
switch) takes effect. 2. PUC: Whether to enable the
Potential User Control (PUC) algorithm. This
algorithm adjusts cell selection and reselection
parameters based on the cell load to enable UEs to
reselect lightly loaded cells. 3. UL_UU_OLC:
Whether to enable the uplink overload control (OLC)
algorithm. When the uplink power is overloaded in a
cell, this algorithm alleviates the uplink load by using
quick transport format (TF) restriction, distributing
best effort (BE) service to common channels, or

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

150

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

Feature
Name

Description

140223

UMTS
to LTE

releasing UEs. 4. DL_UU_OLC: Whether to enable


the downlink OLC algorithm. When the downlink
power is overloaded in a cell, this algorithm alleviates
the downlink load by using quick TF restriction,
distributing BE services to common channels,
releasing UEs, or reconfiguring the maximum transmit
power of FACHs. 5. UL_UU_LDR: Whether to
enable the uplink load reshuffling (LDR) algorithm.
When the uplink load is heavy in a cell, this algorithm
alleviates the uplink load by using load-based
inter-frequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, and AMR
service rate reduction. 6. DL_UU_LDR: Whether to
enable the downlink LDR algorithm. When the
downlink load is heavy in a cell, this algorithm
alleviates the downlink load by using load-based
inter-frequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, AMR service
rate reduction, and MBMS power restriction. 7.
OLC_EVENTMEAS: Whether to enable OLC event
measurement. 8. CELL_CODE_LDR: Whether to
enable cell code reshuffling algorithm. In the event of
code resource overuse, this algorithm alleviates the
code resource overuse by using BE service rate
reduction, code tree reshuffling, and load-based
inter-frequency handovers. 9. CELL_CREDIT_LDR:
Whether to enable the cell credit reshuffling
algorithm. In the event of cell credit overuse, this
algorithm alleviates the credit overuse by using
load-based inter-frequency handovers, BE service rate
reduction, uncontrollable real-time service QoS
renegotiation, and load-based CS/PS inter-RAT
handovers. 10. UL_INTRA_FREQUENCY_ULB:
Whether to enable RTWP-based intra-frequency load
balancing algorithm. This algorithm adjusts P-CPICH
transmit power of a cell based on the RTWP load to
achieve load balancing between intra-frequency cells.
This algorithm automatically becomes invalid when
the load-based dynamic P-CPICH transmit power
adjustment algorithm (controlled by the
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH
switch) takes effect. 11. UL_UU_CLB: Whether to
enable the uplink load-based CLB algorithm. This
algorithm determines whether a cell enters the CLB
state by the uplink load on the air interface. If a cell is
in the CLB state, measurement-based inter-frequency
handovers are triggered periodically to achieve load
balancing between inter-frequency cells. 12.
DL_UU_CLB: Whether to enable the downlink

WRFD150236
WRFD020101
WRFD140226
WRFD020107
WRFD020104
WRFD020105
WRFD020126
WRFD0106120
2
WRFD020129
WRFD010626
WRFD010627
WRFD020103
WRFD010660
WRFD010661
WRFD010662
WRFD010663
WRFD010665
WRFD140102
WRFD0106600
4
WRFD0106160
6

Issue 01 (2014-04-30)

11 Parameters

Load
Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Handov
er from
UMTS
to LTE
SRVCC
from
LTE to
UMTS
with PS
Handov
er
HSDPA
Admissi
on
Control
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
Load
Based
Dynami
c
Adjustm
ent of
PCPICH
Admissi
on
Control
Fast
Return

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

151

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

11 Parameters

Feature
ID

Feature
Name

Description

WRFD0106600
2

from
UMTS
to LTE

WRFD0106600
3

Overloa
d
Control

WRFD0106600
1

Intra
Frequen
cy Load
Balance

load-based CLB algorithm. This algorithm determines


whether a cell enters the CLB state by the downlink
load on the air interface. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 13.
CELL_CODE_CLB: Whether to enable code
resource-based CLB algorithm. This algorithm
determines whether a cell enters the CLB state by the
code resource usage. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 14.
CELL_CREDIT_CLB: Whether to enable
credit-based CLB algorithm. This algorithm
determines whether a cell enters the CLB state by the
credit resource usage. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
between inter-frequency cells. 15.
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH:
Whether to enable downlink load-based dynamic
primary common pilot channel (P-CPICH) power
adjustment algorithm. This algorithm adjusts the
P-CPICH transmit power by the downlink non-HSPA
power load to reduce the downlink non-HSPA power
load. If this algorithm takes effect, other enabled
algorithms for intra-frequency load balancing (based
on TCP or RTWP) automatically become invalid. 16.
ADAPTIVE_RACH: Function switch for the adaptive
RACH feature. When this switch is turned on, this
feature is activated. In this case, the RNC adjusts the
random access parameters based on the random access
state and on the uplink power load of the target cell.
When this switch is turned off, this feature is
deactivated. 17. ACK_PRACH_PREAM_MEAS:
Whether to measure the number of acknowledged
PRACH preambles. When this switch is turned on, the
RNC measures the number of acknowledged PRACH
preambles. When this switch is turned off, the RNC
does not measure the number of acknowledged
PRACH preambles. 18.
CAMPING_STRATEGY_SWITCH: Whether to
enable the camping policy switching function when
traffic is heavy. This is a function switch for the
function. When the switch is turned on, the camping
policy switching function is enabled if traffic is heavy
in the entire network. Then, the target cell is no longer
a preferred camping cell for the UE in question, but a
random camping cell.

WRFD0106160
5
WRFD150220
WRFD0106160
1
WRFD0106160
3
WRFD0106160
2
WRFD140217
WRFD0106160
4
WRFD010616
WRFD0106160
8
WRFD140218

Potential
User
Control
Mobility
Between
UMTS
and LTE
Phase 1
HSUPA
Admissi
on
Control
PS
Service
Redirect
ion from
UMTS
to LTE
MBMS
FLC(Fre
quency
Layer
Converg
ence)/F
LD(Freq
uency
Layer
Dispersi
on)
FACH
Transmi
ssion
Sharing
for
MBMS
Inter
Frequen
cy Load

Issue 01 (2014-04-30)

GUI Value Range: INTRA_FREQUENCY_LDB,

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

152

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Balance

PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC,


DL_UU_OLC, OLC_EVENTMEAS,
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH

MBMS
Phase 2
MBMS
over Iur
Dynami
c Power
Estimati
on for
MTCH
MSCH
Scheduli
ng
MBMS
Channel
Audienc
e Rating
Statistic
s
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
Inter-Fre
quency
Neighbo
ring Cell
Selectio
n for
MBMS
PTP
Users

Unit: None
Actual Value Range: INTRA_FREQUENCY_LDB,
PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC,
DL_UU_OLC, OLC_EVENTMEAS,
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
Default Value:
INTRA_FREQUENCY_LDB:0,PUC:0,UL_UU_LDR
:0,DL_UU_LDR:0,UL_UU_OLC:0,DL_UU_OLC:0,
OLC_EVENTMEAS:0,CELL_CODE_LDR:0,CELL_
CREDIT_LDR:0,UL_INTRA_FREQUENCY_ULB:0
,UL_UU_CLB:0,DL_UU_CLB:0,CELL_CODE_CLB
:0,CELL_CREDIT_CLB:0,DLLOAD_BASED_PCPI
CH_PWR_ADJ_SWITCH:0,ADAPTIVE_RACH:0,A
CK_PRACH_PREAM_MEAS:0,CAMPING_STRAT
EGY_SWITCH:0

Streami
ng
Service
on
MBMS
MBMS
P2P
over
HSDPA
MBMS
Admissi
on

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

153

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Enhance
ment
MBMS
Enhance
d
Broadca
st Mode
MBMS
Transpo
rt
Resourc
e
Manage
ment
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
Inter-Fre
quency
Load
Balancin
g Based
on
Configu
rable
Load
Threshol
d
MBMS
Soft/Sel
ective
Combini
ng
MBMS

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

154

WCDMA RAN
AMR Feature Parameter Description

Parame
ter ID

NE

MML
Comma
nd

Feature
ID

11 Parameters

Feature
Name

Description

Introduc
tion
Package
16/32/64
/128Kbp
s
Channel
Rate on
MBMS
ServiceBased
PS
Handov
er from
UMTS
to LTE

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

155

WCDMA RAN
AMR Feature Parameter Description

12 Counters

12

Counters

Table 12-1 Counter description


Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

67180677

VS.AMR.UL.R
ateDown

Number of UL
Rate Decreases
for AMR
Services for
Cell

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67180678

VS.AMR.DL.R
ateUp

Number of DL
Rate Increases
for AMR
Services for
Cell

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67190519

VS.AMR.DL.R
ateDown

Number of DL
Rate Decreases
for AMR
Services for
Cell

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67190520

VS.AMR.UL.R
ateUp

Number of UL
Rate Increases
for AMR
Services for
Cell

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192001

VS.AMRWB.D
LRateUp

Number of
Increases of DL
Rate for AMR
WB Speech
Service

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192002

VS.AMRWB.D
LRateDown

Number of
Decreases of
DL Rate for
AMR WB
Speech Service

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

156

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

67192003

VS.AMRWB.U
LRateUp

Number of
Increases of UL
Rate for AMR
WB Speech
Service

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192004

VS.AMRWB.U
LRateDown

Number of
Decreases of
UL Rate for
AMR WB
Speech Service

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192120

VS.RAB.AttEst
abCS.AMRWB

Number of CS
Wideband
AMR Service
RAB
Establishment
Attempts for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

67192121

VS.RAB.SuccE
stabCS.AMRW
B

Number of
Successful CS
Wideband
AMR RAB
Establishments
for Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

67192201

VS.RAB.Abnor
mRel.AMRWB.
23.85

Number of CS
23.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Number of CS
23.05kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of CS
19.85kbit/s WB

BSC6900

67192202

67192203

VS.RAB.Abnor
mRel.AMRWB.
23.05

VS.RAB.Abnor
mRel.AMRWB.

Issue 01 (2014-04-30)

WRFD-010510

3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi

157

WCDMA RAN
AMR Feature Parameter Description

Counter ID

67192204

67192205

67192206

67192207

12 Counters

Counter
Name

Counter
Description

19.85

AMR RABs
Abnormally
Released for
Cell

VS.RAB.Abnor
mRel.AMRWB.
18.25

VS.RAB.Abnor
mRel.AMRWB.
15.85

VS.RAB.Abnor
mRel.AMRWB.
14.25

VS.RAB.Abnor
mRel.AMRWB.
12.65

Issue 01 (2014-04-30)

NE

Feature ID

Feature Name

WRFD-010510

Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of CS
18.25kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of CS
15.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of CS
14.25kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of CS
12.65kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
158

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
Connection and
Radio Access
Bearer
Establishment
and Release

67192208

67192209

67203803

67203804

VS.RAB.Abnor
mRel.AMRWB.
8.85

VS.RAB.Abnor
mRel.AMRWB.
6.6

VS.RB.AMRW
B.DL.23.85

VS.RB.AMRW
B.DL.23.05

Issue 01 (2014-04-30)

Number of CS
8.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of CS
6.6kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 23.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 23.05
kbit/s in the cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment

159

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
and Release

67203805

67203806

67203807

67203808

67203809

VS.RB.AMRW
B.DL.19.85

VS.RB.AMRW
B.DL.18.25

VS.RB.AMRW
B.DL.15.85

VS.RB.AMRW
B.DL.14.25

VS.RB.AMRW
B.DL.12.65

Issue 01 (2014-04-30)

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 19.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 18.25
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 15.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 14.25
kbit/s in the cell

BSC6900

Number of UEs
that use the CS

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi

160

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

AMR WB
speech service
at the DL bit
rate of 12.65
kbit/s in the cell

67203810

67203811

67203812

67203813

VS.RB.AMRW
B.DL.8.85

VS.RB.AMRW
B.DL.6.60

VS.RB.AMRW
B.UL.23.85

VS.RB.AMRW
B.UL.23.05

Issue 01 (2014-04-30)

Feature Name
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 8.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 6.60
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 23.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 23.05

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
161

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

kbit/s in the cell

67203814

67203815

67203816

67203817

VS.RB.AMRW
B.UL.19.85

VS.RB.AMRW
B.UL.18.25

VS.RB.AMRW
B.UL.15.85

VS.RB.AMRW
B.UL.14.25

Issue 01 (2014-04-30)

Feature Name
Connection and
Radio Access
Bearer
Establishment
and Release

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 19.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 18.25
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 15.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 14.25
kbit/s in the cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment

162

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
and Release

67203818

67203819

67203820

VS.RB.AMRW
B.UL.12.65

VS.RB.AMRW
B.UL.8.85

VS.RB.AMRW
B.UL.6.60

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 12.65
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 8.85
kbit/s in the cell

BSC6900

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 6.60
kbit/s in the cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

73394277

VS.RAB.AttEst
abCS.AMRWB
23.85

Number of CS
23.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394278

VS.RAB.AttEst
abCS.AMRWB
23.05

Number of CS
23.05kbit/s
AMRWB
service RAB
establishment
Attempts for

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

163

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

cell
73394279

VS.RAB.AttEst
abCS.AMRWB
19.85

Number of CS
19.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394280

VS.RAB.AttEst
abCS.AMRWB
18.25

Number of CS
18.25kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394281

VS.RAB.AttEst
abCS.AMRWB
15.85

Number of CS
15.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394282

VS.RAB.AttEst
abCS.AMRWB
14.25

Number of CS
14.25kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394283

VS.RAB.AttEst
abCS.AMRWB
12.65

Number of CS
12.65kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394284

VS.RAB.AttEst
abCS.AMRWB
8.85

Number of CS
8.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394285

VS.RAB.AttEst
abCS.AMRWB
6.60

Number of CS
6.60kbit/s
AMRWB
service RAB

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

164

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

establishment
Attempts for
cell
73394286

VS.RAB.SuccE
stabCS.AMRW
B23.85

Number of CS
23.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394287

VS.RAB.SuccE
stabCS.AMRW
B23.05

Number of CS
23.05kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394288

VS.RAB.SuccE
stabCS.AMRW
B19.85

Number of CS
19.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394289

VS.RAB.SuccE
stabCS.AMRW
B18.25

Number of CS
18.25kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394290

VS.RAB.SuccE
stabCS.AMRW
B15.85

Number of CS
15.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394291

VS.RAB.SuccE
stabCS.AMRW
B14.25

Number of CS
14.25kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394292

VS.RAB.SuccE
stabCS.AMRW

Number of CS
12.65kbit/s

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

165

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter
Name

Counter
Description

B12.65

AMRWB
service RAB
successfully
established for
cell

73394293

VS.RAB.SuccE
stabCS.AMRW
B8.85

Number of CS
8.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394294

VS.RAB.SuccE
stabCS.AMRW
B6.60

Number of CS
6.60kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73403815

VS.RAB.Abnor
mRel.AMRWB.
Iur

Number of CS
AMRWB RABs
Abnormally
Released on the
SRNC Iur
Interface for
SRNC

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Number of CS
AMRWB RABs
Normally
Released on the
SRNC Iur
Interface for
SRNC

BSC6900

Number of CS
23.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
23.05kbps
AMRWB RABs
Normally

BSC6900

Counter ID

73403816

73403833

73403834

VS.RAB.Norm
Rel.AMRWB.Iu
r

VS.RAB.Norm
Rel.AMRWB.2
3.85

VS.RAB.Norm
Rel.AMRWB.2
3.05

Issue 01 (2014-04-30)

NE

Feature ID

Feature Name
Rate Wide
Band)

WRFD-010501

Conversational
QoS Class
WRFD-010613
WRFD-010501

AMR-WB
(Adaptive Multi
Rate Wide
Band)
Conversational
QoS Class

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide

166

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Released for
cell

73403835

73403836

73403837

73403838

VS.RAB.Norm
Rel.AMRWB.1
9.85

VS.RAB.Norm
Rel.AMRWB.1
8.25

VS.RAB.Norm
Rel.AMRWB.1
5.85

VS.RAB.Norm
Rel.AMRWB.1
4.25

Issue 01 (2014-04-30)

Feature Name
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of CS
19.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
18.25kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
15.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
14.25kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
167

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
Radio Access
Bearer
Establishment
and Release

73403839

73403840

73403841

73403842

VS.RAB.Norm
Rel.AMRWB.1
2.65

VS.RAB.Norm
Rel.AMRWB.8.
85

VS.RAB.Norm
Rel.AMRWB.6.
60

VS.RAB.Abnor
mRel.AMRWB

Issue 01 (2014-04-30)

Number of CS
12.65kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
8.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
6.60kbps
AMRWB RABs
Normally
Released for
cell

BSC6900

Number of CS
AMRWB RABs
Abnormally
Released for
cell

BSC6900

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

168

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

73403843

VS.RAB.Norm
Rel.AMRWB

Number of CS
AMRWB RABs
Normally
Released for
cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

WRFD-010510

3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

73427211

VS.AttCall.UE
Capab.AMRW
B

Number of
Calls Initiated
and Received
by UEs
Supporting
AMR-WB for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73427917

VS.LCC.LDR.
AMRSfRecfg

Number of UEs
Involved in
AMR-WB SF
Reconfiguration
When a Cell Is
in the Basic
Congestion
State

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428273

VS.RAB.Rel.A
MRWB.UL.Lo
wQuality

Number of
Normally
Released
AMR-WB
RABs (Poor
Uplink Voice
Quality)

BSC6900

WRFD-010501

Conversational
QoS Class

Number of
Normally
Released
AMR-WB
RABs (Poor
Downlink
Voice Quality)

BSC6900

Number of CS
Service Setup
Attempts
Initiated by UEs
in Idle Mode for
Cell

BSC6900

73428274

73428375

VS.RAB.Rel.A
MRWB.DL.Lo
wQuality

VS.OrigCSCall.
AttEstab.Idle

Issue 01 (2014-04-30)

WRFD-010613
WRFD-160104

AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)

169

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
KQI Voice

73428376

73428377

VS.OrigCSCall.
AttEstab.CSFB.
Redir

VS.OrigCSCall.
AttEstab.DCH

Number of CS
Service Setup
Attempts
Initiated by
Redirection-bas
ed CSFB UEs
for Cell

BSC6900

Number of CS
Service Setup
Attempts
Initiated by UEs
in CELL_DCH
State for Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428378

73428379

73428380

73428381

VS.OrigCSCall.
AttEstab.FACH

VS.OrigCSCall.
AttEstab.PCH

VS.OrigCSCall.
AttEstab.CSFB.
PSHO

VS.OrigCSCall.
SuccEstab.Idle

Number of CS
Service Setup
Attempts
Initiated by UEs
in
CELL_FACH
State for Cell

BSC6900

Number of CS
Service Setup
Attempts
Initiated by UEs
in
CELL_PCH/UR
A_PCH State
for Cell

BSC6900

Number of CS
Service Setup
Attempts
Initiated by
Handover-based
CSFB UEs for
Cell

BSC6900

Number of
Successful CS
Service Setups
Initiated by UEs
in Idle Mode for
Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

170

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

73428382

VS.OrigCSCall.
SuccEstab.CSF
B.Redir

Number of
Successful CS
Service Setups
Initiated by
Redirection-bas
ed CSFB UEs
for Cell

BSC6900

WRFD-010501

Conversational
QoS Class

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_DCH
State for Cell

BSC6900

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_FACH
State for Cell

BSC6900

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_PCH/UR
A_PCH State
for Cell

BSC6900

Number of
Successful CS
Service Setups
Initiated by
Handover-based
CSFB UEs for
Cell

BSC6900

Number of
Times that the
Access Delay of
AMR-WB Calls
Is GOOD for
Cell

BSC6900

73428383

73428384

73428385

73428386

73428428

VS.OrigCSCall.
SuccEstab.DCH

VS.OrigCSCall.
SuccEstab.FAC
H

VS.OrigCSCall.
SuccEstab.PCH

VS.OrigCSCall.
SuccEstab.CSF
B.PSHO

VS.OrigCall.Est
abDelay.Good.
Num.AMRWB

WRFD-010613
WRFD-160104

AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428429

VS.OrigCall.Est

Issue 01 (2014-04-30)

Number of

BSC6900

WRFD-010501

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Conversational

171

WCDMA RAN
AMR Feature Parameter Description

Counter ID

12 Counters

Counter
Name

Counter
Description

abDelay.Mediu
m.Num.AMRW
B

Times that the


Access Delay of
AMR-WB Calls
Is MEDIUM for
Cell

NE

Feature ID

Feature Name

WRFD-010613

QoS Class

WRFD-160104

AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428430

VS.OrigCall.Est
abDelay.Bad.N
um.AMRWB

Number of
Times that the
Access Delay of
AMR-WB Calls
Is BAD for Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428432

VS.RAB.Rel.A
MRWB.CNAbn
ormal

Number of
AMR-WB
RABs
Abnormally
Released by the
CN for Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428886

VS.AMRNB.D
L.RateUp.Tcp

Number of
Times That
Downlink Rate
Increase Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428887

VS.AMRNB.D
L.RateDown.Tc
p

Number of
Times That
Downlink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428888

VS.AMRWB.D
L.RateUp.Tcp

Number of
Times That
Downlink Rate
Increase Is
Triggered for

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

172

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

WB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)
73428889

VS.AMRWB.D
L.RateDown.Tc
p

Number of
Times That
Downlink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428890

VS.AMRNB.U
L.RateUp.UeTx
Pwr

Number of
Times That
Uplink Rate
Increase Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428891

VS.AMRNB.U
L.RateDown.Ue
TxPwr

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428892

VS.AMRWB.U
L.RateUp.UeTx
Pwr

Number of
Times That
Uplink Rate
Increase Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428893

VS.AMRWB.U
L.RateDown.Ue

Number of
Times That

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

173

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter
Name

Counter
Description

TxPwr

Uplink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

73428894

VS.AMRNB.U
L.RateUp.TRF
O

Number of
Times That
Uplink Rate
Increase Is
Triggered for
NB-AMR
Services for
Cell (Based on
TrFO)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428895

VS.AMRNB.U
L.RateDown.T
RFO

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Based on
TrFO)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428896

VS.AMRWB.U
L.RateUp.TRF
O

Number of
Times That
Uplink Rate
Increase Is
Triggered for
WB-AMR
Services for
Cell (Based on
TrFO)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428897

VS.AMRWB.U
L.RateDown.T
RFO

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Based on
TrFO)

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428898

VS.LCC.LDR.
AMRWBRateU
L

Number of
Times That
Rate Reduction
Is Performed for
WB-AMR

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

Counter ID

Issue 01 (2014-04-30)

NE

Feature ID

Feature Name
Control

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

174

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

Services due to
Uplink Basic
Congestion for
Cell
73428899

VS.LCC.LDR.
AMRWBRateD
L

Number of
Times That
Rate Reduction
Is Performed for
WB-AMR
Services due to
Downlink Basic
Congestion for
Cell

BSC6900

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428905

VS.ULBler.AM
RWB.ErrTB

Number of TBs
with UL CRCI
Error for
AMR-WB
Services for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73428906

VS.ULBler.AM
RWB.Sample

Number of
BLER
Samplings for
AMR-WB
Services for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73444346

VS.OrigCall.Est
abMeanTime.A
MRWB.PCH

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in the
CELL_PCH/UR
A_PCH State
for Cell

BSC6900

WRFD-010501

Conversational
QoS Class

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in
Redirection-bas
ed CSFB for
Cell

BSC6900

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in
Handover-based
CSFB for Cell

BSC6900

73444347

73444348

VS.OrigCall.Est
abMeanTime.A
MRWB.CSFB.
Redir

VS.OrigCall.Est
abMeanTime.A
MRWB.CSFB.
PSHO

Issue 01 (2014-04-30)

WRFD-010613
WRFD-160104

AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)

175

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
KQI Voice

73444349

VS.OrigCall.Est
abMeanTime.A
MRWB

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
for Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73444353

73444354

VS.OrigCall.Est
abMeanTime.A
MRWB.DCH

VS.OrigCall.Est
abMeanTime.A
MRWB.FACH

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in the
CELL_DCH
State for Cell

BSC6900

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in the
CELL_FACH
State for Cell

BSC6900

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73444479

VS.RAB.AMR
WB.Erlang.cell

Number of
Erlangs for
AMRWB
Services for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73444480

VS.ULBler.AM
RWB

UL BLER of
AMR-WB
Services for
Cell

BSC6900

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

67180677

VS.AMR.UL.R
ateDown

Number of UL
Rate Decreases
for AMR
Services for
Cell

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67180678

VS.AMR.DL.R
ateUp

Number of DL
Rate Increases
for AMR
Services for
Cell

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67190519

VS.AMR.DL.R
ateDown

Number of DL
Rate Decreases
for AMR

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

176

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

Services for
Cell
67190520

VS.AMR.UL.R
ateUp

Number of UL
Rate Increases
for AMR
Services for
Cell

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192001

VS.AMRWB.D
LRateUp

Number of
Increases of DL
Rate for AMR
WB Speech
Service

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192002

VS.AMRWB.D
LRateDown

Number of
Decreases of
DL Rate for
AMR WB
Speech Service

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192003

VS.AMRWB.U
LRateUp

Number of
Increases of UL
Rate for AMR
WB Speech
Service

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192004

VS.AMRWB.U
LRateDown

Number of
Decreases of
UL Rate for
AMR WB
Speech Service

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

67192120

VS.RAB.AttEst
abCS.AMRWB

Number of CS
Wideband
AMR Service
RAB
Establishment
Attempts for
Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

67192121

VS.RAB.SuccE
stabCS.AMRW
B

Number of
Successful CS
Wideband
AMR RAB
Establishments
for Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

67192201

VS.RAB.Abnor
mRel.AMRWB.
23.85

Number of CS
23.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Issue 01 (2014-04-30)

WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

3.4/6.8/13.6/27.
2Kbps RRC

177

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
Connection and
Radio Access
Bearer
Establishment
and Release

67192202

67192203

67192204

67192205

VS.RAB.Abnor
mRel.AMRWB.
23.05

VS.RAB.Abnor
mRel.AMRWB.
19.85

VS.RAB.Abnor
mRel.AMRWB.
18.25

VS.RAB.Abnor
mRel.AMRWB.
15.85

Issue 01 (2014-04-30)

Number of CS
23.05kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
19.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
18.25kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
15.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment

178

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
and Release

67192206

67192207

67192208

67192209

67203803

VS.RAB.Abnor
mRel.AMRWB.
14.25

VS.RAB.Abnor
mRel.AMRWB.
12.65

VS.RAB.Abnor
mRel.AMRWB.
8.85

VS.RAB.Abnor
mRel.AMRWB.
6.6

VS.RB.AMRW
B.DL.23.85

Issue 01 (2014-04-30)

Number of CS
14.25kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
12.65kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
8.85kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of CS
6.6kbit/s WB
AMR RABs
Abnormally
Released for
Cell

BSC6910

Number of UEs
that use the CS

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi

179

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

AMR WB
speech service
at the DL bit
rate of 23.85
kbit/s in the cell

67203804

67203805

67203806

67203807

VS.RB.AMRW
B.DL.23.05

VS.RB.AMRW
B.DL.19.85

VS.RB.AMRW
B.DL.18.25

VS.RB.AMRW
B.DL.15.85

Issue 01 (2014-04-30)

Feature Name
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 23.05
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 19.85
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 18.25
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 15.85

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
180

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

kbit/s in the cell

67203808

67203809

67203810

67203811

VS.RB.AMRW
B.DL.14.25

VS.RB.AMRW
B.DL.12.65

VS.RB.AMRW
B.DL.8.85

VS.RB.AMRW
B.DL.6.60

Issue 01 (2014-04-30)

Feature Name
Connection and
Radio Access
Bearer
Establishment
and Release

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 14.25
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 12.65
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 8.85
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the DL bit
rate of 6.60
kbit/s in the cell

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment

181

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name
and Release

67203812

67203813

67203814

67203815

67203816

VS.RB.AMRW
B.UL.23.85

VS.RB.AMRW
B.UL.23.05

VS.RB.AMRW
B.UL.19.85

VS.RB.AMRW
B.UL.18.25

VS.RB.AMRW
B.UL.15.85

Issue 01 (2014-04-30)

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 23.85
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 23.05
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 19.85
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 18.25
kbit/s in the cell

BSC6910

Number of UEs
that use the CS

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi

182

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

AMR WB
speech service
at the UL bit
rate of 15.85
kbit/s in the cell

67203817

67203818

67203819

67203820

VS.RB.AMRW
B.UL.14.25

VS.RB.AMRW
B.UL.12.65

VS.RB.AMRW
B.UL.8.85

VS.RB.AMRW
B.UL.6.60

Issue 01 (2014-04-30)

Feature Name
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 14.25
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 12.65
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 8.85
kbit/s in the cell

BSC6910

Number of UEs
that use the CS
AMR WB
speech service
at the UL bit
rate of 6.60

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
183

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

kbit/s in the cell

Feature Name
Connection and
Radio Access
Bearer
Establishment
and Release

73394277

VS.RAB.AttEst
abCS.AMRWB
23.85

Number of CS
23.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394278

VS.RAB.AttEst
abCS.AMRWB
23.05

Number of CS
23.05kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394279

VS.RAB.AttEst
abCS.AMRWB
19.85

Number of CS
19.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394280

VS.RAB.AttEst
abCS.AMRWB
18.25

Number of CS
18.25kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394281

VS.RAB.AttEst
abCS.AMRWB
15.85

Number of CS
15.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394282

VS.RAB.AttEst
abCS.AMRWB
14.25

Number of CS
14.25kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

184

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

73394283

VS.RAB.AttEst
abCS.AMRWB
12.65

Number of CS
12.65kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394284

VS.RAB.AttEst
abCS.AMRWB
8.85

Number of CS
8.85kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394285

VS.RAB.AttEst
abCS.AMRWB
6.60

Number of CS
6.60kbit/s
AMRWB
service RAB
establishment
Attempts for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394286

VS.RAB.SuccE
stabCS.AMRW
B23.85

Number of CS
23.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394287

VS.RAB.SuccE
stabCS.AMRW
B23.05

Number of CS
23.05kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394288

VS.RAB.SuccE
stabCS.AMRW
B19.85

Number of CS
19.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394289

VS.RAB.SuccE
stabCS.AMRW
B18.25

Number of CS
18.25kbit/s
AMRWB
service RAB
successfully
established for

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

185

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

cell
73394290

VS.RAB.SuccE
stabCS.AMRW
B15.85

Number of CS
15.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394291

VS.RAB.SuccE
stabCS.AMRW
B14.25

Number of CS
14.25kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394292

VS.RAB.SuccE
stabCS.AMRW
B12.65

Number of CS
12.65kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394293

VS.RAB.SuccE
stabCS.AMRW
B8.85

Number of CS
8.85kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73394294

VS.RAB.SuccE
stabCS.AMRW
B6.60

Number of CS
6.60kbit/s
AMRWB
service RAB
successfully
established for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73403815

VS.RAB.Abnor
mRel.AMRWB.
Iur

Number of CS
AMRWB RABs
Abnormally
Released on the
SRNC Iur
Interface for
SRNC

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Number of CS
AMRWB RABs
Normally
Released on the

BSC6910

73403816

VS.RAB.Norm
Rel.AMRWB.Iu
r

Issue 01 (2014-04-30)

WRFD-010501

Conversational
QoS Class
WRFD-010613
WRFD-010501

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)

186

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

SRNC Iur
Interface for
SRNC
73403833

73403834

73403835

73403836

VS.RAB.Norm
Rel.AMRWB.2
3.85

VS.RAB.Norm
Rel.AMRWB.2
3.05

VS.RAB.Norm
Rel.AMRWB.1
9.85

VS.RAB.Norm
Rel.AMRWB.1
8.25

Issue 01 (2014-04-30)

Feature Name
Conversational
QoS Class

Number of CS
23.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
23.05kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
19.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
18.25kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

187

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter ID

Counter
Name

Counter
Description

NE

Feature ID

Feature Name

73403837

VS.RAB.Norm
Rel.AMRWB.1
5.85

Number of CS
15.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Number of CS
14.25kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
12.65kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
8.85kbps
AMRWB RABs
Normally
Released for
cell

BSC6910

Number of CS
6.60kbps
AMRWB RABs
Normally

BSC6910

73403838

73403839

73403840

73403841

VS.RAB.Norm
Rel.AMRWB.1
4.25

VS.RAB.Norm
Rel.AMRWB.1
2.65

VS.RAB.Norm
Rel.AMRWB.8.
85

VS.RAB.Norm
Rel.AMRWB.6.
60

Issue 01 (2014-04-30)

WRFD-010510

3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide

188

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Released for
cell

73403842

73403843

VS.RAB.Abnor
mRel.AMRWB

VS.RAB.Norm
Rel.AMRWB

Feature Name
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

Number of CS
AMRWB RABs
Abnormally
Released for
cell

BSC6910

Number of CS
AMRWB RABs
Normally
Released for
cell

BSC6910

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

WRFD-010613
WRFD-010510

AMR-WB
(Adaptive Multi
Rate Wide
Band)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release

73427211

VS.AttCall.UE
Capab.AMRW
B

Number of
Calls Initiated
and Received
by UEs
Supporting
AMR-WB for
Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73427917

VS.LCC.LDR.
AMRSfRecfg

Number of UEs
Involved in
AMR-WB SF
Reconfiguration
When a Cell Is
in the Basic
Congestion
State

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428273

VS.RAB.Rel.A
MRWB.UL.Lo

Number of
Normally
Released

BSC6910

WRFD-010501

Conversational
QoS Class

Issue 01 (2014-04-30)

WRFD-010613

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

189

WCDMA RAN
AMR Feature Parameter Description

Counter ID

12 Counters

Counter
Name

Counter
Description

wQuality

AMR-WB
RABs (Poor
Uplink Voice
Quality)

NE

Feature ID

Feature Name

WRFD-160104

AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428274

73428375

VS.RAB.Rel.A
MRWB.DL.Lo
wQuality

VS.OrigCSCall.
AttEstab.Idle

Number of
Normally
Released
AMR-WB
RABs (Poor
Downlink
Voice Quality)

BSC6910

Number of CS
Service Setup
Attempts
Initiated by UEs
in Idle Mode for
Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428376

73428377

VS.OrigCSCall.
AttEstab.CSFB.
Redir

VS.OrigCSCall.
AttEstab.DCH

Number of CS
Service Setup
Attempts
Initiated by
Redirection-bas
ed CSFB UEs
for Cell

BSC6910

Number of CS
Service Setup
Attempts
Initiated by UEs
in CELL_DCH
State for Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428378

73428379

VS.OrigCSCall.
AttEstab.FACH

VS.OrigCSCall.
AttEstab.PCH

Issue 01 (2014-04-30)

Number of CS
Service Setup
Attempts
Initiated by UEs
in
CELL_FACH
State for Cell

BSC6910

Number of CS
Service Setup
Attempts
Initiated by UEs

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Conversational
QoS Class
AMR-WB
(Adaptive Multi

190

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

in
CELL_PCH/UR
A_PCH State
for Cell
73428380

73428381

VS.OrigCSCall.
AttEstab.CSFB.
PSHO

VS.OrigCSCall.
SuccEstab.Idle

Feature Name
Rate Wide
Band)
KQI Voice

Number of CS
Service Setup
Attempts
Initiated by
Handover-based
CSFB UEs for
Cell

BSC6910

Number of
Successful CS
Service Setups
Initiated by UEs
in Idle Mode for
Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428382

73428383

73428384

73428385

VS.OrigCSCall.
SuccEstab.CSF
B.Redir

VS.OrigCSCall.
SuccEstab.DCH

VS.OrigCSCall.
SuccEstab.FAC
H

VS.OrigCSCall.
SuccEstab.PCH

Issue 01 (2014-04-30)

Number of
Successful CS
Service Setups
Initiated by
Redirection-bas
ed CSFB UEs
for Cell

BSC6910

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_DCH
State for Cell

BSC6910

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_FACH
State for Cell

BSC6910

Number of
Successful CS
Service Setups
Initiated by UEs
in the
CELL_PCH/UR

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide

191

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

A_PCH State
for Cell
73428386

73428428

VS.OrigCSCall.
SuccEstab.CSF
B.PSHO

VS.OrigCall.Est
abDelay.Good.
Num.AMRWB

Feature Name
Band)
KQI Voice

Number of
Successful CS
Service Setups
Initiated by
Handover-based
CSFB UEs for
Cell

BSC6910

Number of
Times that the
Access Delay of
AMR-WB Calls
Is GOOD for
Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428429

VS.OrigCall.Est
abDelay.Mediu
m.Num.AMRW
B

Number of
Times that the
Access Delay of
AMR-WB Calls
Is MEDIUM for
Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428430

VS.OrigCall.Est
abDelay.Bad.N
um.AMRWB

Number of
Times that the
Access Delay of
AMR-WB Calls
Is BAD for Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428432

VS.RAB.Rel.A
MRWB.CNAbn
ormal

Number of
AMR-WB
RABs
Abnormally
Released by the
CN for Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73428886

VS.AMRNB.D
L.RateUp.Tcp

Issue 01 (2014-04-30)

Number of
Times That
Downlink Rate
Increase Is
Triggered for
NB-AMR
Services for

BSC6910

WRFD-020701

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR/WB-AM
R Speech Rates
Control

192

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

Cell (Triggered
by Downlink
Transmit
Power)
73428887

VS.AMRNB.D
L.RateDown.Tc
p

Number of
Times That
Downlink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428888

VS.AMRWB.D
L.RateUp.Tcp

Number of
Times That
Downlink Rate
Increase Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428889

VS.AMRWB.D
L.RateDown.Tc
p

Number of
Times That
Downlink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by Downlink
Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428890

VS.AMRNB.U
L.RateUp.UeTx
Pwr

Number of
Times That
Uplink Rate
Increase Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428891

VS.AMRNB.U
L.RateDown.Ue

Number of
Times That

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

193

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter
Name

Counter
Description

TxPwr

Uplink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

73428892

VS.AMRWB.U
L.RateUp.UeTx
Pwr

Number of
Times That
Uplink Rate
Increase Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428893

VS.AMRWB.U
L.RateDown.Ue
TxPwr

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Triggered
by UE Transmit
Power)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428894

VS.AMRNB.U
L.RateUp.TRF
O

Number of
Times That
Uplink Rate
Increase Is
Triggered for
NB-AMR
Services for
Cell (Based on
TrFO)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428895

VS.AMRNB.U
L.RateDown.T
RFO

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
NB-AMR
Services for
Cell (Based on
TrFO)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428896

VS.AMRWB.U
L.RateUp.TRF

Number of
Times That
Uplink Rate

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates

Counter ID

Issue 01 (2014-04-30)

NE

Feature ID

Feature Name
Control

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

194

WCDMA RAN
AMR Feature Parameter Description

12 Counters

Counter
Name

Counter
Description

Increase Is
Triggered for
WB-AMR
Services for
Cell (Based on
TrFO)

73428897

VS.AMRWB.U
L.RateDown.T
RFO

Number of
Times That
Uplink Rate
Reduction Is
Triggered for
WB-AMR
Services for
Cell (Based on
TrFO)

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428898

VS.LCC.LDR.
AMRWBRateU
L

Number of
Times That
Rate Reduction
Is Performed for
WB-AMR
Services due to
Uplink Basic
Congestion for
Cell

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428899

VS.LCC.LDR.
AMRWBRateD
L

Number of
Times That
Rate Reduction
Is Performed for
WB-AMR
Services due to
Downlink Basic
Congestion for
Cell

BSC6910

WRFD-020701

AMR/WB-AM
R Speech Rates
Control

73428905

VS.ULBler.AM
RWB.ErrTB

Number of TBs
with UL CRCI
Error for
AMR-WB
Services for
Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73428906

VS.ULBler.AM
RWB.Sample

Number of
BLER
Samplings for
AMR-WB
Services for
Cell

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

73444346

VS.OrigCall.Est
abMeanTime.A
MRWB.PCH

Average Access
Delay of the
AMR-WB Calls

BSC6910

WRFD-010501

Conversational
QoS Class

Counter ID

Issue 01 (2014-04-30)

NE

Feature ID

Feature Name
Control

WRFD-010613

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
195

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Initiated by UEs
in the
CELL_PCH/UR
A_PCH State
for Cell
73444347

73444348

73444349

VS.OrigCall.Est
abMeanTime.A
MRWB.CSFB.
Redir

VS.OrigCall.Est
abMeanTime.A
MRWB.CSFB.
PSHO

VS.OrigCall.Est
abMeanTime.A
MRWB

Feature ID

Feature Name

WRFD-160104

(Adaptive Multi
Rate Wide
Band)
KQI Voice

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in
Redirection-bas
ed CSFB for
Cell

BSC6910

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in
Handover-based
CSFB for Cell

BSC6910

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
for Cell

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

73444353

73444354

73444479

VS.OrigCall.Est
abMeanTime.A
MRWB.DCH

VS.OrigCall.Est
abMeanTime.A
MRWB.FACH

VS.RAB.AMR
WB.Erlang.cell

Issue 01 (2014-04-30)

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in the
CELL_DCH
State for Cell

BSC6910

Average Access
Delay of the
AMR-WB Calls
Initiated by UEs
in the
CELL_FACH
State for Cell

BSC6910

Number of
Erlangs for
AMRWB
Services for

BSC6910

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010501
WRFD-010613
WRFD-160104

Conversational
QoS Class
AMR-WB
(Adaptive Multi
Rate Wide
Band)
KQI Voice

WRFD-010613

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

AMR-WB
(Adaptive Multi
Rate Wide
Band)

196

WCDMA RAN
AMR Feature Parameter Description

Counter ID

Counter
Name

12 Counters

Counter
Description

NE

Feature ID

Feature Name

BSC6910

WRFD-010613

AMR-WB
(Adaptive Multi
Rate Wide
Band)

Cell
73444480

VS.ULBler.AM
RWB

Issue 01 (2014-04-30)

UL BLER of
AMR-WB
Services for
Cell

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

197

WCDMA RAN
AMR Feature Parameter Description

13 Glossary

13

Glossary

For the acronyms, abbreviations, terms, and definitions, see the Glossary.

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

198

WCDMA RAN
AMR Feature Parameter Description

14 Reference Documents

14

Reference Documents

1.

3GPP TS 28.062, "Inband Tandem Free Operation (TFO) of speech codecs; Service
description; Stage 3 "

2.

3GPP TS 26.103, "Speech codec list for GSM and UMTS"

3.

3GPP TR 26.975, "Performance characterization of the Adaptive Multi-Rate (AMR)


speech codec"

4.

Load Control Feature Parameter Description

5.

Voice over HSPA Feature Parameter Description

6.

Call Admission Control Feature Parameter Description

Issue 01 (2014-04-30)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd.

199

You might also like