Professional Documents
Culture Documents
Ground
Engaging Tools
6th Edition
®
Cat Ground Engaging Tools
Wear Protection 3
Bulldozers / Compactors 13
Excavators 75
Scrapers 625
1
Introduction
This Ground Engaging Tools Parts Sales Kit (GET) is designed to provide
dealer salespeople (field and instore) with part numbers and product infor-
mation as well as features and benefits for selected parts and service prod-
ucts. It is a quick reference tool which lists part numbers and applications
for items that are: new, competitive and high in sales volume and sales
potential.
The GET PSK should not be used as a substitute for Parts Books,
Numerical Parts Record, Parts Pricing Medium or any other formal
reference publication. All part numbers, specifications and application
data published in the GET PSK are subject to change without notice. Any
information taken from this publication for use in preparing a Parts
Sales Order or Price Quotation should always be verified against the
Numerical Parts Record in accordance with the Management Partsgram
entitled “The Numerical Parts Record.”
The tab index enables users to quickly locate various sections in the GET
PSK. Users are urged to use the GET PSK consistently to help ensure close
familiarity with the vast amount of part numbers and product information.
This book supports the Caterpillar® Ground Engaging Tools for loader
buckets, excavator buckets, rippers, bulldozer blades and scraper bowls on
either competitive or Caterpillar machines. The function of the program is
to increase customer satisfaction and GET component sales by making
available a consistent, high-quality GET product line for all machines.
• The service/welding shop will also find many uses for this guide.
NOTE: For a detailed list of serial number equivalent information, see Serial
Number Index, Form No. SEBF9451. This Equivalent Serial Number
Guide covers Caterpillar machines from 1955.
2
Wear Protection
3
Wear Protection
WELD-ON HALF-ARROW EDGES / WELD-ON HEEL SHROUDS
Weld-on half-arrow edges protect the bucket structure by adding more wear T
material to the base edge, and they will fit other brand buckets. H
The weld-on half-arrow edges can be used to customize loader buckets. For
example, they could be used as sidecutters on bucket side bars to improve pene- W
tration, or welded between bucket teeth to reduce scalloping. Before welding
half-arrow sections between bucket teeth, be sure to check for tip and pin hole B
clearance. This is a concern primarily when using bottom strap adapters.
Options
W T H B Overall Length
Part No. in. mm in. mm in. mm in. mm feet mm
134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438
134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 2438
8J8141 8 203 0.75 19 0.50 13 0.16 4.0 12 3658
8J8176 10 254 1.10 28 1.10 29 0.44 11 12 3658
6Y2107 10 254 1.60 40 1.20 30 1.00 25 12 3658
109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486
132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000
Weld-on heel shrouds protect the lower outside corner of all types of Caterpillar
and other brand buckets. Protection is given to the bottom and the side of the
bucket with extra wear material concentrated in the corner where it’s needed most.
Straight and curved heel shrouds are available in two different sizes to best match
bucket contour and size, and abrasiveness of the application. The inside corner is
relieved to eliminate interference with the bucket structure. Shrouds need not be
placed tightly together. They can be spaced apart and still provide full protection
due to ‘shadowing.’ Weld-on heel shrouds are especially applicable for LHEX
and underground LHD buckets.
For high wear applications Caterpillar’s Mechanically Attached Wear Plate System
(MAWPS) should be considered due to their quick change design. However, for B
moderate wear applications and sites especially concerned about mechanically
fastened parts these weld-on heel shrouds are an excellent option to consider.
Weight A B C D E F G H R A
lb in in in in in in in in in
Part No. Type (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
157-1019 straight 68.4 9.8 7.9 — 10.6 2.0 1.8 1.2 7.9 — C
(31.0) (250) (200) (270) (50) (45) (30) (200)
157-1027 curved 63.1 9.8 7.9 7.6 10.6 2.0 1.8 1.2 7.9 31.5
(28.6) (250) (200) (193) (270) (50) (45) (30) (200) (800) R
138-6529 straight 30.4 6.9 5.9 — 8.1 1.6 1.4 1.0 5.9 —
(13.8) (175) (150) (205) (40) (35) (25) (150)
138-6551 curved 29.5 6.9 5.9 5.4 8.1 1.6 1.4 1.0 5.9 23.6
(13.4) (175) (150) (136) (205) (40) (35) (25) (150) (600)
A
4
Wear Protection
“WHITE IRON” WEAR BLOCK
This product is designed to add long wear life in highly abrasive applications. It
has a hardness rating of Rc 60-65 and offers lower cost protection than “hard-
137-9698
facing.” In addition to its ease of application, it is environmentally neutral, 4.6" x 4.6" x .54" 137-9697
unlike some other wear protection products. (117 mm x 117 mm x 14 mm) 4.6" x 2" x .54"
(117 mm x 51 mm x 14 mm)
5
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
The Mechanically Attached Wear Plate System provides a hammerless means of instal-
lation and removal. They are capable of protecting wear areas previously unprotected
or protected by weld-on or bolt-on wear plates in a large variety of applications on Cat
and competitive machines. The Skeletal MAWPS uses the same Series 20 base and
retainer as the regular MAWPS, but has a modified skeletal plate that fits on the base.
The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate
and between the plates.
Description
Wear plates are made from Caterpillar DH-2 steel and are through hardened to obtain
optimum strength and wear life. The base plate is made from slightly softer but tough
weldable steel to withstand high load forces. The base plate is not subject to wear
under normal conditions since it is entirely covered by the wear plate. The patented
compression retainer is investment cast from spring steel material and acts as a
spacer when located in the holding position. As a system, the Mechanically Attached
Wear Plate System will accept loads from any direction and does not require specific
orientation as with competitive wear plates. They only require approximately 2 inches
(50 mm) of space from adjacent objects on one end to facilitate replacement.
Application
The Mechanically Attached Wear Plate System can be installed on virtually any
flat surface or on moderately curved surfaces providing the radius is not extremely
small. Radius capability is specified in the parts consist chart. Bucket bottoms and
sides, dozer push arms, Hydraulic Excavator bucket ski runners and sides, truck
body duck tails, Tiger dozer blades, crusher hoppers are all candidates for wear plate
protection. Long life, ability to customize protection and ease of use promise to make
this unique wear system a popular alternative to bolt-on or weld-on wear plates.
The Skeletal Mechanically Attached Wear Plate System can be installed on virtually
any flat or moderately curved surfaces of the truck bed. They come in two sizes, stan-
dard and heavy duty. Long life, ability to customize protection and ease of use
promise to make this unique wear system a popular alternative to weld-on wear
protection.
6
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
Wear Indicator
The wear plate has recessed holes (blind holes) cast into each corner to serve as a
wear indicator making inspections quick and easy. When the holes become exposed
in one or more corners, it is time to change the wear plate. If the wear plate is
allowed to wear beyond the wear indicator, damage to base plate may occur.
Parts Consist
Mechanically Attached Wear Plate System
Suggested Base Plate Wear Plate Compression Radius
Series Models (thk) (dimension) Retainer Capability*
20 Series 966, 980, 988, 345B, 138-0020 138-0022 138-0006 7.87 in (200 mm)
other similar 0.70 in thick 8.85 in x 7.87 in x 1.38 in minimum
sizes (18 mm) (225 mm x 200 mm x 35 mm)
5.35 lb (2.43 kg) 14.15 lb (6.42 kg)
7
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
Promotion Material
CD Rom Training/Sales Presentation: A CD Rom titled “Caterpillar Mechani-
cally Attached Wear Plate System” (PEXT7000) is available through literature
distribution. This can be used by dealer machine and parts sales people for train-
ing or customer sales presentations. The CD Rom is interactive covering an Intro-
duction, Features and Benefits, Size Comparison, How To Remove and Install
and Questions and Answers. The CD plays for approximately 20 minutes and is
complete with video, narration and virtual reality features. Remove and install
instructions can be printed and used as a field reference.
Warranty
As with all Ground Engaging Tools from Caterpillar, the Mechanically Attached
Wear Plate System components are warranted against breakage for the normal
wear life of the product. Caterpillar will not provide warranty coverage under the
breakage terms of the warranty statement if the wear plates are worn beyond the
wear indicators on the wear plate.
8
Wear Protection
MECHANICALLY ATTACHED WEAR PLATE SYSTEM
2) Position the base plate in the desired location and weld the base plate in posi-
tion welding at locations A & B as shown in the following illustration.
Location C is used only for the 50 series base plate. Make one pass at a time in
each location to avoid excess heat build-up. The base plate will require several
passes at each location to ensure proper strength is achieved. Use the chart to
determine fillet weld size and number of passes for each series base plate.
Series Fillet
Base Plate Weld Size
20 Series 0.6 in (15 mm)
30 Series 0.6 in (15 mm)
40 Series 0.7 in (18 mm)
50 Series 0.8 in (20 mm)
3) Position the wear plate over the base plate and slide the wear plate onto the base.
4) Install one end of the compression retainer under the resting point.
5) Insert installation tool 160-5119 or a small pry bar with an 8 mm (0.31") width point
between the base and wear plate and pry the compression retainer into place. After
the retainer compresses and goes over center, it will pop into place and expand.
6) Remove the installation tool and check the compression retainer to assure it is in
position.
Removal
1) Clean the compression retainer opening in the wear plate free of packed material.
A pneumatic chipper is the most effective method to clean the packed material. Not
all packed material needs to be cleaned away to remove the retainer.
2) Insert the installation tool or a small pry bar in the slotted area of the compres-
sion retainer and pry up. The compression retainer will pop up out of the lock-
ing position.
3) Remove the retainer and slide the wear plate off the base plate.
NOTE: Compression retainers can be reused if they meet the following criteria:
1. 138-0006 no less than 87 mm (3.43") length.
138-0007 no less than 97 mm (3.82") length.
2. Retainer is no more than 2 mm (.080") out of flat.
3. There is no deformation of the retainer material.
9
Wear Protection
WEAR BARS
WEAR BARS
Wear bars come in different lengths to allow a customer to tailor the place-
ment of the wear protection while minimizing the amount of throw-away
iron. Part numbers for the various lengths are shown below:
Wear bars are made from DH-2 steel alloy, through-hardened for greater
wear resistance and strength. Core hardness of the bars will be between
45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone must
be preheated to 150-230°C. It is also recommended to preheat the bars to
the 150-230°C temperature when welding. The bars are to be positioned so
the bevel is next to the surface shown at right.
10
Wear Protection
NOTES
11
Wear Protection
NOTES
12
Bulldozers / Compactors
13
Bulldozers / Compactors
D11 CARRYDOZERS
CARRYDOZER GET
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts Washers
11 5JP 1.77 45 5 136-6750** 8 5P8361 3K9770 4K0684
Carrydozer GD♦ 136-6750♦
EWL♦♦ 2.38 60 5 144-1299♦♦
* Quantity per edge or bit.
** After rotating cutting edge 136-6750 to shorter side, use shorter end bit 109-9053/4.
♦ The 136-6750 GD is an Ex-Factory offering and comes with the 136-6751/2 GD end bits. When it comes time to rotate the cutting edge, the shorter side will be down. With the
shorter side down, it is necessary to use 109-9053/4 GD short end bits. When replacing the cutting edge 136-6750 GD, make sure that it is installed with the long side down,
and that the 136-6751/2 GD or the 136-6753/4 GD-Penetration end bits are used.
♦♦ The 144-1299 EWL cutting edge is used for highly abrasive applications. When it comes time to rotate this cutting edge, the shorter side will be down. With the shorter side
down, it will be necessary to use 144-1297/8 EWL short end bits. When replacing the cutting edge 144-1299 EWL, make sure that it is installed with the long side down, and
that the 144-1295/6 EWL end bits are used.
END BITS
Blade Blade Part Part # Thickness Hardware
Model Ser. Number Description (R-L) inches mm Qty.* Bolts Nuts Washers
11 5JP Penetration 136-6751/2 2.36 60 9 5P8361 3K9770 4K0684
Carrydozer Standard 136-6753/4
Short End Bit 109-9053/4
EWL 144-1295/6 3.00 75
EWL - Short 144-1297/8
End Bit
* Quantity per edge or bit.
SIDEBAR PROTECTOR
Blade Sidebar Adapter
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty.
11 125-0800 2 8E4708 4 4T4707 4 135-9794 2
Carrydozer
14
Bulldozers / Compactors
D11 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts
11SU 4BB, 4KB, GD 1.77 45 2 9W2426-C 9 5P8823 3K9770**
9NH, 1AP, 2 9W2425-E 9
4XP EWL 2.36 60 2 9W4495-C 9
2 9W4494-E 9
EEWL 3.00 75 2 135-9577-E 9
2 135-9578-C 9
11U 4CB, 5TB, GD 1.77 45 1 9W2426-C 9 5P8823 3K9770**
9MH, 9ZH, 2 9W2425-E 9
4YP 2 9W2424-I 9
EWL 2.36 60 1 9W4495-C 9
2 9W4494-E 9
2 9W4493-I 9
C — Center Edge E — End Edge I — Intermediate Edge GD — General Duty EWL — Extended Wear Life
* Number of bolts and nuts required per edge.
** Also use 4K0684 washers.
EEWL is an extra thick edge for high face wear reclamation applications.
END BITS
Utility
Blade Blade EWL GD Thickness Hardware
Model Ser. Number (R-L) (R-L) (R-L) inches mm Qty.* Bolts Nuts
11SU, 11U 4BB, 4KB, 9NH, 1AP 8E4545/6 8E4543/4 8E9785/6 2.36 60 9a 5P8823 3K9770**
4CB, 5TB, 9MH, 9ZH, 4YP 8E9748/9 3.00 75
EWL — Extended Wear Life GD — General Duty
* Number of bolts and nuts required per end bit.
** Also use 4K0684 washers.
a Quantity per end bit.
15
Bulldozers / Compactors
D11 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Part inches mm
11SU 4BB, 4KB, 5-Piece Set Right End 4T8143 0.63 16
9NH, 1AP Right Center 4T8145
Center 4T5308
Left Center 4T8146
Left End 4T8144
3-Piece Set Right End 4T8143
Center 6Y1100
Left End 4T8144
Push Plate 4T5308
8PP 3-Piece Set Right End 136-3984 0.55 14
Center 136-3986
Left End 139-3985
11US 4CB, 5TB, 5-Piece Set Right End 4T7629 0.63 16
4CB UP to Right Center 4T7632
00787 Center 4T5308
Left Center 4T7631
Left End 4T7630
3-Piece Set Right End 4T7629
Center 6Y1319
Left End 4T7630
4CB for 00788 3-Piece Set Right End 122-2320
and UP, Center 122-2322
9MH, 9ZH Left End 122-2321
8RP 3-Piece Set Right End 126-8341 0.55 14
Center 126-8343
Left End 126-8342
SIDEBAR PROTECTOR
Blade Sidebar Adapter
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty.
D11 125-0800 2 8E4708 4 4T4707 4 135-9794 2
16
Bulldozers / Compactors
D10 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts
10C 83W FD 1.38 35 2 9J3751-E 10 8J2928 2J3507a
10SU 79W FD 1.38 35 2 1U4459-C 9
2 1U4455-E 9
GD 1.57 40 2 4T0081-C 9
2 4T0082-E 9
GD 1.77 45 2 6Y0016-C 9 5P8823 3K9770b
2 6Y0017-E 9
EWL 2.00 50 2 4T0607-C 9
2 4T0604-E 9
EWL 2.36 60 2 6Y0020-C 9
2 6Y0021-E 9
1RH, GD 1.38 35 2 9W6609-C 6
7RH, 2 9W6608-E 5
4KP, EWL 1.77 45 2 9W6656-C 6
6EP 2 9W6657-E 5
EEWL** 2.36 60 2 8E2085-C 6
2 8E2086-E 5
EEWL** 3.00 75 2 135-9580-C 6 5P8823 3K9770b
2 135-9579-E 5
10U 80W FD 1.38 35 3 1U4458-C 9
2 1U4457-E 7
GD 1.57 40 3 4T0083-C 9
2 4T0084-E 7
GD 1.77 45 3 6Y0018-C 9 5P8823 3K9770b
2 6Y0019-E 7
EWL 2.00 50 3 4T0609-C 9
2 4T0608-E 7
EWL 2.36 60 3 6Y0023-C 9
2 6Y0022-E 7
1SH, GD 1.38 35 3 9W6615-C 5
7WH, 2 9W6608-E 5
4LP, EWL 1.77 45 3 9W6658-C 5
6FP 2 9W6657-E 5
EEWL** 2.36 60 3 8E2087-C 5
2 8E2086-E 5
C — Center Edge E — End Edge FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* Per edge.
** EEWL is an extra thick edge for high face wear reclamation applications.
a Uses 5P8250 washers.
b Uses 4K0684 washers.
D10 BULLDOZERS
17
Bulldozers / Compactors
D10 BULLDOZERS
END BITS
Utility
Blade Blade EWL GD Finish Abrasion/Impact Thickness Hardware
Model Ser. Number (R-L) (R-L) (R-L) (R-L) (R-L) inches mm Qty. Bolts Nuts
10C 83W (2) 4T6538 6c 8J2928a 2J3507
10SU, 10U 79W, 80W 8E4545/6 8E4543/4 8E9785/6 2.36 60 9c 5P8361b 3K9770
8E9748/9 2.95 75 7c
4KP, 6EP, 8E4541/2 8E4199/8 7T4689/8-HC 100-3131/2 1.75 45 7c 5P8823
1RH, 1SH, 100-3133/4 2.36 60
4LP, 6FP,
7RH, 7WH
HC — Hot cupped design GD — General Duty
a Also use 5P8250 washers.
b Also use 4K0684 washers.
c Quantity per end bit.
SIDEBAR PROTECTOR
Blade Sidebar Adapter
Model Protector Qty. Pin Qty. Retainer Qty. Plate Qty.
D10 125-0800 2 8E4708 4 4T4707 4 135-9794 2
18
Bulldozers / Compactors
D10 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
10C 83W Push Plate 9J4567 0.79 20
10SU 79W1-536 Wear Plates 8 3G6344 0.47 12
Push Plate 3G6343 0.63 16
79W537-UP 5-Piece Set Right End 4T3722 0.63 16
Right Center 4T3725
Center/Push 1U3697
Left Center 4T3724
Left End 4T3723
1RH, 7RH 5-Piece Set Right End 9W1258
Right Center 9W7260
Center 9W2409
Left Center 9W7261
Left End 9W1261
3-Piece Set Right End 9W1258
Center 6Y1011
Left End 9W1261
Push Plate 9W2409
4KP 3-Piece Set Right End 9W1258
6EP Center 6Y1011
Left End 9W1261
10U 80W1-467 All 9 3G6344 0.47 12
80W468-UP 5-Piece Set Right End 4T3726 0.63 16
Right Center 4T3729
Center 1U3697
Left Center 4T3728
Left End 4T3727
1SH, 7WH 5-Piece Set Right End 9W7263
Right Center 9W7262
Center 9W2409
Left Center 9W7264
Left End 9W7265
3-Piece Set Right End 9W7263
Center 6Y1080
Left End 9W7265
4LP 3-Piece Set Right End 132-1486
6FP Center 132-1488
Left End 132-1487
19
Bulldozers / Compactors
D9 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
9A 52C, 90D, FD 1.12 28 1 4T6388-C 7 8J2928 2J3507c
11E, 26E 2 4T6387-E 9
EWL 1.62 41 1 7J2966-C 7
2 7J2965-E 9
9C 70F, 45G FD 1.12 28 1 4T6450-C 15 8J2928 2J3507c
20Y 2 4T6388-E 7
9R 39K FD 1.12 28 3 4T6386 7 8J2928 2J3507c
EWL 1.62 41 3 7J2980 7
9SU 21E1-831, FD 1.12 28 1 4T6459-C 9 8J2928 2J3507c
25E, 06A 2 4T6456-E 6
EWL 1.62 41 1 7J2961-C 9 4J9208
2 7J2960-E 6
53C, 89D, FD 1.12 28 2 4T6448 10 4J9208 2J3507c
21E832-UP EWL 1.62 41 2 7J2962 10
05A, 18K, 46K, FD 1.12 28 3 4T6386 7 4J9208a 2J3507c
73R, 61U GD 1.38 35 3 9W4500 7 4J9058c
EWL 1.62 41 3 7J2980 7 8J2928
EWL 1.57 40 3 7T4342* 7 4J9058c
18Y1-1875, FD 1.12 28 1 4T6386-C 7 4J9208 2J3507c
52Y, 42S 2 4T6385-E 8
GD 1.38 35 1 9W4500-C 7 1J4948
2 9W4502-E 8
GD 1.38 35 1 6Y0310*-C 7 4J9208
1 6Y0311*-L 8
1 6Y0312*-R 8
EWL 1.62 41 1 7J2980-C 7
2 9W4508-E 8
EWL2** 1.77 45 1 6Y0476*-C 7
1 6Y0477*-L 8
1 6Y0478*-R 8
18Y1876-UP GD 1.38 35 2 7T9782-C 6 6V8360 3K9770b
2 7T9779-E 5
EWL 1.77 45 2 9W3928-C 6 5P8823
2 9W3930-E 5
1MH, 5BH, FD 1.10 28 1 6Y5539-C 12 4J9208 2J3507c
1LP, 2LP, 2 6Y5540-E 5
7NH, 2ZP, GD 1.38 35 1 7T5702-C 12
2BP, 9LH 2 7T9125-E 5
EWL 1.77 45 1 9W7043-C 12
2 9W3927-E 5
C — Center Edge E — End Edge L — Left End R — Right End (Chart continued on next page)
FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* Wider edges with offset bolt holes. Use only with 7T4092/3 (long side) or 9W9193/4 (short side).
** EWL2 is an extra thick edge for high face wear reclamation applications.
a Uses 3K5234 washers.
b Uses 4K0684 washers.
c Uses 5P8250 washers.
20
Bulldozers / Compactors
D9 BULLDOZERS
21
Bulldozers / Compactors
D9 BULLDOZERS
END BITS
GD* Utility
Blade Blade EWL Thickness Finish Thickness Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts
9A 52C, 90D, 4J8723/4 1.25 32 7d 8J2928c 2J3507
11E, 26E 3G8291/2 1.38 35
9C 70F, 45G 3G8283/4 1.57 40
20Y (2) 4T6389 5d 4J9058c
9R 39K 4T6391/2 7d 8J2928c 2J3507
9SU 53C, 89D, 7T4093/2 5J1279-80 1.25 32 7d 8J2928c 2J3507
21E, 25E, 3G8289/90 1.38 35
05A, 18K, 46K, 3G8281/82 1.57 40
73R, 61U 9W9193/4 1.97 50
18Y, 52Y, 8E4541/2 1U1545/6 1.57 40 3G7763/4 100-3131/2 1.75 45 7d 5P8823b 3K9770
42S 8E4199/8a 2.16 55 100-3133/4 2.36 60
7T4689/8 2.36 60
1MH, 5BH, 2BP, 2ZP, 8E4539/40 8E4197/6 1.97 50 6Y4277/8 100-3135/6 1.75 45 7d 4J9208c 2J3507
1LP, 2LP, 7NH, 9LH 100-3137/8 2.36 60
9U 55C, 14C, 19K, 7T4095/4 4J8723/4 1.25 32 7d 8J2928c 2J3507
20H, 78X 3G8291/2 1.38 35
3G8283/4 1.57 40
8E4197/6 1.97 50
19Y, 78S 8E4541/2 1U1545/6 1.57 40 3G7763/4 100-3131/2 1.75 45 7d 5P8823b 3K9770
8E4199/8a 2.16 55 100-3133/4 2.36 60
7T4689/8 2.36 60
1LH, 2ZH, 8E4539/40 8E4197/6 1.97 50 6Y4277/8 100-3135/6 1.75 45 7d 4J9208c 2J3507
1MP, 7PH 100-3137/8 2.36 60
* Part numbers that begin with: 3G, 1U, 7T = Hot cupped, Abrasion.
4J, 5J, 1U, 7T = Impact.
a Use only with 16" (406 mm) wide edges.
b Use 4K0684 washers.
c Use 5P8250 washers.
d Quantity per end bit.
22
Bulldozers / Compactors
D9 BULLDOZERS
WEAR PLATES
Blade Serial Part Thickness
Model Number Location Qty. Number inches mm
9A All All 5 3J3380 0.47 12
9R All Sides 4 6J9249 0.47 12
Center 6J9248 0.63 16
9SU 53G, 89D, 21E, 25E Wear Plates 4 2J8523 0.47 12
Push Plate 2J8524 0.79 20
05A, 18K, 46K, 73R, 61U Wear Plates 4 6J9249 0.47 12
Push Plate 6J9248 0.63 16
18Y1-1875, 52Y1-1875 5-Piece Set Right End 4T3730 0.63 16
Right Center 4T3732 0.63 16
Center/Push 1U0902 0.63 16
Left Center 4T3733 0.63 16
Left End 4T3731 0.63 16
18Y1876-UP 5-Piece Set Right End 9W1258 0.63 16
Right Center 9W1259 0.63 16
Center/Push 9W0810 0.63 16
Left Center 9W1260 0.63 16
Left End 9W1261 0.63 16
1MH, 5BH, 7NH, 5-Piece Set Right End 9T0249 0.63 16
1LP, 2LP, 2ZP Right Center 9T0251 0.63 16
Center 7T5803 0.63 16
Left Center 9T0252 0.63 16
Left End 9T0250 0.63 16
3-Piece Set Right End 9T0249 0.63 16
Center 6Y1255 0.63 16
Left End 9T0250 0.63 16
Push Plate 7T5803 0.63 16
9U 55C Wear Plates 4 2J8525 0.47 12
Push Plate 2J8524 0.79 20
14C, 19K, 78X Wear Plates 4 6J9269 0.47 12
19Y1-1474, 78S1-1474 5-Piece Set Right End 4T3734 0.63 16
Right Center 4T3736 0.63 16
Center 1U0902 0.63 16
Left Center 4T3737 0.63 16
Left End 4T3735 0.63 16
19Y1475-UP 5-Piece Set Right End 9W0812 0.63 16
Right Center 9W0809 0.63 16
Center 9W0810 0.63 16
Left Center 9W0811 0.63 16
Left End 9W0808 0.63 16
1LH, 2ZH, 7PH, 1MP 3-Piece Set Right End 6Y6912 0.63 16
Center 6Y6910 0.63 16
Left End 6Y6911 0.63 16
23
Bulldozers / Compactors
D8 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
8A 07A, 18C, 33D, FD 0.75 19 2 4T2943 16 1J6762 2J3506
99D, 87D, 07E, FD 1.00 25 2 4T2888
22E, 72D GD 1.38 35 2 9W8657
28E1-11125 FD 1.00 25 4 4T6532 6 5J2409 2J3505
GD 1.38 35 4 6Y6761
EWL 1.57 40 4 107-3474*
4 7T4348*
28E11126-UP, FD 1.00 25 3 4T2994 8 4J9058 2J3507
93E, 14F, 77C GD 1.38 35 3 9W8658
EWL 1.57 40 3 107-3484*
3 7T4351*
05Y, 41Z, 27B FD 1.00 25 2 4T2988-C 7 4J9208 2J3507a
2 4T2987-E 6
GD 1.38 35 2 9W8655-C** 7
2 9W8657-E** 6
GD 1.38 35 2 1U4933-C 7
2 1U4932-E 6
EWL 1.77 45 2 107-3479-C 7
2 107-3481-E 6
EWL 1.57 40 2 7T4353-C* 7
2 7T4352-E* 6
1HH, 2XP, FD 1.12 28 3 9W5432 8 4F4042 2J3507b
9AH, 6NH, 4ZP GD 1.38 35 3 9W9098 8
EWL 1.77 45 3 112-2474 8
8C 71F, 77G FD 1.00 25 1 4T2867 13 5J2409 2J3505
8R 43K FD 1.00 25 2 4T3418 10 5J2409 2J3505
8SU 08A, 12C, 18C, FD 0.75 19 2 4T2944 13 1J6762 2J3506
32D,03E, 86D, FD 1.00 25 2 4T2860
44C1-1192
44C1193-UP, FD 1.00 25 2 4T2862 10 1J6762 2J3506
73D
78C, 29E, 94E FD 1.00 25 2 4T6531 10 5J2409 2J3505
GD 1.38 35 2 6Y6764
EWL 1.57 40 2 6Y5776*
EWL 1.57 40 2 107-3477
69E, 14J, 44K, FD 1.00 25 2 4T3418 10 5J2409 2J3505
95S, 80V, 47K GD 1.38 35 2 6Y6763
EWL 1.57 40 2 6Y5777*
EWL 1.77 45 2 107-3476
29V, 30W FD 1.00 25 3 4T2988 7 4J9058 2J3507
68V, 60V GD 1.38 35 3 9W8657
EWL 1.77 45 3 107-3479
EWL 1.57 40 3 7T4353*
04Y1-1939 FD 1.12 28 2 4T3423-C 6 4J9208 2J3507
2 4T3417-E 5
GD 1.38 35 2 1U4930-C 6
2 1U4929-E 5
GD 1.38 35 2 6Y6358-C** 6
2 6Y6359-E** 5
EWL 1.77 45 2 107-3482-C 6
2 107-3480-E 5
EWL 1.57 40 2 7T5235-C* 6
1 7T4346-L* 5
1 7T4345-R* 5
C — Center Edge E — End Edge L — Left End R — Right End (Chart continued on next page)
FD — Finish Dozing GD — General Duty EWL — Extended Wear Life
* EWL — wider edges with offset bolt holes. Use only with EWL end bits - 7T4088/9 (long side) and 9W8651/2 (short side).
** 11" wide edges.
a Uses 3K5234 washers.
b Uses 5P8250 washers.
24
Bulldozers / Compactors
D8 BULLDOZERS
25
Bulldozers / Compactors
D8 BULLDOZERS
END BITS
GD* Utility
Blade Blade EWL Thickness Finish Thickness Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty.c Bolts Nuts
8A 07A, 18C, 33D, 3J2465/6 1.00 25 4T6667/8 7 1J6761 2J3506
72D, 87D, 99D
07E, 22E
28E1-11125, 4J8843/4 1.12 28 4T6505/6 7 5J2409 2J3505
93E, 14F, 77C 3G8315/6 1.12 28
3G8285/6 1.57 40
28E11126-UP 7T4091/0 9J1477/8 1.12 28 4T6239/40 7 4J9058b 2J3507
3G8317/8 1.18 30
3G8287/8 1.57 40
9W8653/4 1.97 50
05Y, 41Z, 27B 7T4091/0 9J1477/8 1.12 28 4T8089/90 7 4J9058b 2J3507
3G8317/8 1.18 30
3G8287/8 1.57 40
9W8653/4 1.97 50
6NH, 1HH, 8E4537/8 8E4193/4 1.57 40 6Y4277/8 100-3139/40 1.97 50 7 4F4042b 2J3507
2XP, 9AH, 4ZP
8C 71F, 77G 4J8843/4 1.12 28 4T6505/6 7 5J2409 2J3505
3G8315/6 1.12 28
3G8285/6 1.57 40
8R 43K 4T6669/70 7 5J2409 2J3505
7J2975/6a
8SU 08A, 12C, 18C, 3J2463/4 1.00 25 4T6671/2 7 1J6761 2J3506
86D, 44C, 32D,
73D, 03E
78C, 29E, 94E, 4J8849/50 1.12 28 7 5J2409 2J3505
69E, 14J, 44K, 3G8299/30 1.12 28
47K 3G8277/8 1.57 40
29V, 30W, 68V, 7T4088/9 9J1479/80 1.12 28 7 4J9058b 2J3507
60V 3G8301/2 1.12 28
3G8279/80 1.57 40
9W8651/2 1.97 50
04Y1-1939 7T4091/0 9J1477/8 1.12 28 4T8089/90 7 4J9208b 2J3507
3G8317/8 1.18 30
3G8287/8 1.57 40
9W8653/4 1.97 50
04Y1940-UP 8E4539/40 4J8723/4 1.12 28 100-3135/6 1.75 45 7 4J9208b 2J3507
3G8291/2 1.38 35 100-3137/8 2.36 60
3G8283/4 1.57 40
8E4197/6 1.97 50
9PH, 3WH, 8E4537/8 8E4193/4 1.57 40 6Y4277/8 100-3139/40 1.97 50 7 4F4042b 2J3507
1HP, 6LH,
9BH, 2NP,
1KH, 2PP,
2TP, 3MP
8U 11C, 74D, 3G8313/4 1.12 28 4T6667/8 7 1J6762 2J3506
88D, 24E 7T4091/0 3J2465/6 1.12 28
30E, 73E, 20F, 4J8843/4 1.12 28 4T6505/6 7 5J2409 2J3505
45K, 48K, 29J 3G8315/6 1.12 28
3G8285/6 1.57 40
30V, 65X, 69V, 7T4091/0 9J1477/8 1.12 28 4T6239/40 7 4J9058b 2J3507
06Y1-1395, 3G8317/8 1.18 30 4T8089/90
34W 3G8287/8 1.57 40
9W8653/4 1.97 50
06Y1396-UP, 8E4539/40 4J8723/4 1.12 28 100-3135/6 1.75 45 7 4J9208b 2J3507
42Z, 8ZM 3G8291/2 1.38 35 100-3137/8 2.36 60
3G8283/4 1.57 40
8E4197/6 1.97 50
9CH, 1JH, 8E4537/8 8E4193/4 1.57 40 6Y4277/8 100-3139/40 1.97 50 7 4F4042b 2J3507
2WP, 6AH
* Part numbers that begin with: 3G = Hot cupped, Abrasion. EWL — Extended Wear Life GD — General Duty
3J, 4J, 9J = Impact.
a 1.57" (40 mm) thick.
b Uses 5P8250 washers.
c Quantity per end bit.
26
Bulldozers / Compactors
D8 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
8A 28E, 93E, 14F, 77C, 2XP, 4ZP Wear Plates 5 2J8526 0.40 10
8C 71F, 77G Push Plates 2J9418 0.63 16
8R 43K Push Plates 6J9285 0.63 16
8SU 78C, 29E, 94E Wear Plates 4 4J4205 0.47 12
Push Plate 4J4129 0.79 20
80V, 95S, 69E, Wear Plates 4 6J9286 0.47 12
14J, 44K, 47K
29V, 30W, Wear Plates 5 9J1659 0.47 12
68V, 60V Push Plates 9J6870 0.63 16
04Y1-1939 Wear Plates 5 1U4417 0.47 12
Push Plate 6J9248 0.63 16
04Y1940-UP 5-Piece Set Right End 9T0249 0.63 16
Right Center 9T0251 0.63 16
Center/Push 4T9592 0.63 16
Left Center 9T0252 0.63 16
Left End 9T0250 0.63 16
1KH, 2PP, 2TP, 3MP 5-Piece Set Right End 9W2757 0.63 16
Right Center 9W2758 0.63 16
Center 9W2756 0.63 16
Left Center 9W2759 0.63 16
Left End 9W2760 0.63 16
3-Piece Set Right End 9W2757 0.63 16
Center 9W1771 0.63 16
Left End 9W2760 0.63 16
Push Plate 9W2756 0.63 16
8U 30E, 73E Wear Plates 4 4J4205 0.47 12
Push Plate 4J4129 0.79 20
20F, 45K, 48K Wear Plates 4 6J9286 0.47 12
30V Wear Plates 4 9J1659 0.47 12
1 9J7539 (RH) 0.47 12
1 9J7540 (LH) 0.47 12
Push Plate 9J6870 0.63 16
06Y1-1395 Wear Plates 6 1U4417 0.47 12
06Y1396-UP 5-Piece Set Right Center 9T0255 0.63 16
Right End 9T0253 0.63 16
Center/Push 4T9592 0.63 16
Left End 9T0254 0.63 16
Left Center 9T0256 0.63 16
1JH, 6AH, 2WP 3-Piece Set Right End 6Y7245 0.55 14
Center 6Y7244 0.55 14
Left End 6Y7246 0.55 14
27
Bulldozers / Compactors
D7 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
7A 06A, 17C5001-UP, FD 0.75 19 2 4T2949 15 5J4771 2J3506
35D, 84D, 6E, 18E FD 1.00 25 2 4T2863
13F, 22F, FD 0.75 19 3 4T2948 7 5J4771a 2J3506
30F, 72F, 13H GD 1.00 25 3 4T2989
GD 1.00 25 3 9W9796*
4EB, 3CC, 4ZC FD 0.75 19 3 4T3901 7 6F0196b 2J3505
GD 1.00 25 3 7T6589*
EWL 1.38 35 3 135-9778*
7S 05A, 17C1-5000, FD 0.75 19 1 4T2954 23 5J4771 2J3506
84C, 34D, 83D, GD 1.00 25 1 4T2864
02E, 17E
23F, 31F, 59F, FD 0.75 19 1 4T2946-C 7 5J4773 2J3506
14H 2 4T2945-E 5
GD 1.00 25 1 4T2990-C 7
2 4T2991-E 5
53J, 49K, 60K, FD 0.75 19 1 4T2921-C 7 5J4772b 2J3505
64K 2 4T2922-E 5
GD 1.00 25 1 4T2993-C 7
2 4T2992-E 5
GD 1.00 25 1 9W9794-C* 7
2 9W9795-E* 5
6KB, 8ZB, 4XC, FD 0.75 19 3 4T5318 6 6F0196b 2J3505
8NH GD 1.00 25 3 7T6678*
EWL 1.38 35 3 107-3363
7U 42G FD 0.75 19 1 4T2955-C 9 5J4773 2J3506
2 4T2952-E 5
GD 1.00 25 1 4T2890-C 9
2 4T2985-E 5
85D, 61K, 94R FD 0.75 19 1 4T2917-C 9 5J4772b 2J3505
2 4T2916-E 5
GD 1.00 25 1 4T3421-C 9
2 4T3420-E 5
GD 1.00 25 1 9W9793-C* 9
2 9W9792-E* 5
5SB, 9JB, 7AC, FD 0.75 19 2 4T7110-C 6 6F0196b 2J3505
8MH 2 4T7109-E 4
GD 1.00 25 2 7T6591-C* 6
2 7T6592-E* 4
EWL 1.38 35 2 135-9627-C* 6
2 135-9626-E* 4
7S-LGP 6JB, 3GH, 4FG, FD 0.75 19 3 4T3901 7 6F0196 2J3505
4XH, 5GH GD 1.00 25 3 7T6589*
EWL 1.38 35 3 135-9778*
2RP, 8RH, FD 0.75 19 3 128-5883
5SP, 9KP GD 1.00 25 3 135-6537
EWL 1.38 35 3 145-7846
7SU 4DB, 2FC, 2JH, FD 0.75 19 1 4T5318-C 6 6F0196 2J3505
1JP, 8LH 2 1U1192-E 6
GD 1.00 25 1 7T6678-C* 6
2 7T6936-E* 6
EWL 1.38 35 1 107-3363-C 6
2 107-3362-E 6
C — Center Edge E — End Edge FD — Finish Dozing GD — General Duty
* Edges are 11" (280 mm) wide.
a Uses 5P8248 washers.
b Uses 5P8249 washers.
28
Bulldozers / Compactors
D7 BULLDOZERS
END BITS
GD* Utility
Blade Blade Thickness Finish Thickness Hardware
Model Ser. Number (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts
7A 06A, 35D, 84D, 3G8313/4 0.88 22 4T6667/8 3a 1J6761 2J3506
06E, 18E, 3J2465/6 1.12 28 4a 5J4771
17C5001-UP
22F, 30F, 72F, 3G8293/4 0.88 22 4T6505/6 105-0575/4 1.38 35 7a 5J2409 2J3505
13F, 13H, 4EB 3G8315/6 1.00 25 105-0577/6 1.75 45
4J8843/4 1.12 28
9W6199/8 1.38 35
7S 05A, 84C, 34D, 4T6671/2 7a 5J4771 2J3506
83D, 02E, 17E,
17C1-5000
23F, 31F, 59F, 3G8293/4 0.88 22 4T6505/6 105-0575/4 1.38 35 7a 6F0196 2J3505
60K, 14H, 49K, 3G8315/6 1.00 25 105-0577/6 1.75 45
64K, 53J, 6KB, 4J8843/4 1.12 28
8NH 9W6199/8 1.38 35
7U 42G, 85D, 61K, 3G8293/4 0.88 22 4T6505/6 105-0575/4 1.38 35 7a 6F0196 2J3505
94R, 5SB, 8MH 3G8315/6 1.00 25 105-0577/6 1.75 45
7S-LGP 9KP, 6JB, 2RP, 4J8843/4 1.12 28
8RH, 5SP
7SU 4DB, 1JP, 8LH 9W6199/8 1.38 35
* Part numbers that begin with: 3G = Hot cupped, Abrasion.
3J, 4J = Impact.
a Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
7A All Wear Plates 3 3J3141 0.31 8
7S All Wear Plates 3 3J3142 0.31 8
Push Plate 4J3699 0.63 16
7SU All Push Plate 4J3699 0.63 16
7U All Wear Plates 4 3J3142 0.31 8
Push Plate 4J3699 0.63 16
29
Bulldozers / Compactors
D6 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts Washers
6A 16C5001-UP, FD 0.75 19 1 4T3008-C 11 3F5108 4K0367
37D, 81D, 16E, 2 4T3020-E 9
03F, 04F, 40H
15C5001-UP, FD 0.62 16 1 4T2978 24
39D, 82D, 08E, 0.75 19 2 4T3030 12
09E
54U, 44E, 47G, FD 0.75 19 2 4T3009 10 4F7827 2J3506 5P8248
58G, 18H
1BH1-0569, FD 0.75 19 3 4T6262 7 5J4773 2J3506 5P8248
4DH, 4LH, 3EH EWL 1.00 25 3 7T9977
1BH0570-UP FD 0.75 19 4 4T2952 5
EWL 1.00 25 4 4T2985
1XP, 3GP, 1ZP, 1YP FD 0.75 19 4 4T2952 5 5J4773 2J3506 5P8248
3PP, 4BP, 8TP EWL 1.00 25 4 4T2985 5
6A Custom Wide 6HP FD 0.75 19 4 109-9093 6 5J4773 2J3506 5P8248
6P 3WP, 3XP FD 0.75 19 2 3G4282 7 5J4773 2J3506 5P8248
6P-LGP 4MP FD 0.75 19 2 4T2315 10 5J4773 2J3506 5P8248
4TP, 4WP FD 0.75 19 2 127-3050 10
6S 09A, 01C, 06C, FD 0.62 16 1 4T2977 18 3F5108 4K0367
15C1-5000 FD 0.75 19 1 4T3021 18
16C1-5000 FD 0.62 16 1 4T2976 22
85C, 36D, 80D, FD 0.75 19 1 4T3023 22
38D, 15E, 02G,
03G, 39H
95E, 17H, 46G, FD 0.75 19 1 *4T3013-C* 7 4F7827 2J3506 5P8248
55G, 63S 2 *4T3010-E* 4
21H, 41H FD 0.75 19 1 4T3011-C 11
2 4T3010-E 4
1DH1-0599, 2HH, FD 0.75 19 1 4T6659-C 7 5J4773 2J3506 5P8248
3JH, 4BH 4T3010-E 4
EWL 1.00 25 1 7T9976-C 7
2 7T9978-E 4
1RP, 3EP, FD 0.75 19 3 4T2952 5 5J4773 2J3506 5P8248
1DH600-UP EWL 1.00 25 3 4T2985
6S-LGP 1AH, 2LH, 3FH FD 0.75 19 3 4T6659 7 5J4773 2J3506 5P8248
EWL 1.00 25 3 7T9976
1SP, 3HP FD 0.75 19 3 4T6659 7 5J4773 2J3506 5P8248
EWL 1.00 25 3 7T9976
6SU 1CH, 2NH, 4PH FD 0.75 19 2 9W1878 8 5J4773 2J3506 5P8248
8AH, 8BH EWL 1.00 25 2 6Y3840
2SP, 6GP FD 0.75 19 2 9U8057-E 4 574773 2J3506 5P8248
1 4T6659-C 7
1TP, 3FP, 1WP, FD 0.75 19 2 9W1878 8 5J4773 2J3506 5P8248
3RP, 4AP, 8SP EWL 1.00 25 2 6Y3840 8
6SU Custom Wide 8AH**, 8BH** FD 0.75 19 2 106-0956 9 5J4773 2J3506 5P8248
C — Center Edge E — End Edge FD — Finish Dozing EWL — Extended Wear Life P — Variable Pitch Power Angle Tilt
* Optional one-piece edge 4T3017 can be used to replace (1) 4T3013 and (2) 4T3010.
** Identified by part #4Z6229 or 143-0499 on the blade assembly plate.
NOTE: Cutting edges for the SLGP blades are 8" wide. Cutting edges for all other blades are 10" wide.
30
Bulldozers / Compactors
D6 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Utility Qty. Bolts Nuts
6A 37D, 39D, 81D, 9F7075/6 0.88 22 4T3049/50 6 3F5108 4K0367
82D, 08E, 09E, 3G8295/6 0.88 22
16E, 03F, 04F,
40H, 15C5001-UP,
16C5001-UP
44E, 47G, 58G, 4J8261/2 0.75 19 4T3041/2 6 4F7827 2J3506
18H, 54U 3G8297/8 0.88 22
9W9011/10 1.00 25
3EH, 1BH1-569, 4T4455/4 4T4435/6 6 **5J4773**
4DH, 4LH
1BH570-UP, 9W1875/6 6Y4411/10 1.18 30 9W8874/5 122-8617/18 6 **5J4773** 2J3506
1XP, 3GP, 1ZP,
3PP, 4BP, 8TP,
1YP
6A Custom 6HP 9W1875/6 6Y4411/10 1.18 30 9W8874/5 122-8617/18 6 **5J4773** 2J3506
Wide
6P 3WP, 3XP 4T5407/8 8E9379/78 4 **5J4773** 2J3506
6P-LGP 4MP, 4TP, 4WP 4T5407/8 8E9379/78 4 **5J4773** 2J3506
6S 09A, 01C, 06C, 9F7073/4 0.88 22 4T3051/2 3 3F5108 4K0367
15C1-5000, 3G8321/2 0.88 22 3 4F0391
16C1-5000,
85C, 36D, 38D,
80D, 15E, 02G,
03G, 39H
95E, 46G, 55G, 5J1419/20 0.88 22 4T3045/6 6 4F7827 2J3506
17H, 21H, 63S 3G8319/20 0.88 22
9W9015/14 1.00 25
4BH, 1DH1-599, 4T4455/4 4T4435/6 6 **5J4773** 2J3506
2HH, 3JH, 1AH
1DH600-UP, 9W1875/6 6Y4411/10 1.18 30 9W8874/5 122-8617/18 6 **5J4773** 2J3506
1RP, 3EP
6S-LGP 1AH, 2LH, 3FH, 4T4455/4 4T4435/6 6 **5J4773** 2J3506
1SP, 3HP
6SU & 8AH, 1CH, 2NH, 9W1875/6 6Y4411/10 1.18 30 9W8874/5 122-8617/18 6 **5J4773** 2J3506
Custom 4PH, 8BH
Wide SU 2SP, 6GP 4T5407/8 8E9379/78 4 5J4773** 2J3506
1TP, 3FP, 1WP, 9W1875/6 6Y4411/10 1.18 30 9W8874/5 122-8617/18 6 5J4773** 2J3506
3RP, 4AP, 8SP
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 6Y = Impact.
** Uses 5P8248 washers.
a Quantity per end bit.
NOTE: Endbits for the 6S-LGP dozer are designed to match with 8" wide cutting blades. Endbits for all other dozers are matched with 10" wide edges.
31
Bulldozers / Compactors
D6 BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
6A 01C, 06C, 15C, 37D, Wear Plates 5 1J3108 0.38 10
16C5001-UP, 39D,
81D, 82D, 08E, 09E
16E, 03F, 04F, 40H, Wear Plates 6 3J3740 0.38 10
44E, 18H, 47G, 48G,
54U, 12P, 3PP, 4BP,
1XP, 3GP, 8TP, 1YP
1BH113-UP Wear Plates 3 3J3141 0.31 8
6S 09A, 16C1-5000, Wear Plates 5 1J3108 0.38 10
85C, 80D, 15E, 02G,
03G, 39H
95E**, 21H** Wear Plates 4 2J8526* 0.38 10
1RP**, 3EP** Wear Plates 4 2J8526 0.38 10
1DH116-UP Wear Plates 3 3J3142 0.31 8
6S LGP 1AH, 2LH, 3FH, 1SP, 3HP Wear Plates 5 2J8526 0.38 10♦
6SU 3FP, 1TP, 8SP, 4AP, 1CH, Wear Plates 4 2J8526 0.38 10♦♦
2NH, 4TH, 1WP, 3RP
* One plate requires modification.
** Requires five plates.
♦ Fit Up — Close.
♦♦ Fit Up — OK.
32
Bulldozers / Compactors
D5 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
5A 91H, 96H, 42K FD 0.62 16 1 4T2978 24 3F5108 4K0367
FD 0.75 19 2 4T3030 12
93H1-3846 FD 0.75 19 1 4T3008-C 11
98H, 11J, 13J 2 4T3020-E 9
93H3847-UP FD 0.75 19 2 4T3004 9 4F7827 2J3506
3AH, 2FH, 2TH FD 0.75 19 1 4T3013 7 5J4773a
2 1U2207 6
6RH FD 0.75 19 2 102-4580 8 4F7827 2J3506
5S 90H FD 0.62 16 1 4T2983-C 3 3F5108 4K0367
2 4T2972-E 4
FD 0.75 19 1 4T3027-C 3
2 4T3028-E 4
92H, 97H, 10J, FD 0.75 19 1 4T3025-C 7
12J 2 4T3026-E 4
16K, 19R FD 0.75 19 1 4T3024 28
2BH, 4FH FD 0.75 19 2 3G6062 7 5J4773a 2J3506
5S Pet♦ 4AH FD 0.75 19 2 4T0731 5 5J4773a 2J3506
5S-LGP 1ZH, 3KH FD 0.75 19 2 1U2211 9 5J4773a 2J3506
5P 9WH, 6MH FD 0.62 16 2 3G9306 6 5J4771a 2J3506
2AH, 2MH, 7AH FD 0.75 19 2 3G4282 7 5J4773a 2J3506
4GP, 6JP FD 0.62 16 2 8E9377 7 5J4773a 2J3506
FD 0.75 22 2 4T6659 7 5J4773a 2J3506
8GP FD 0.62 16 2 140-0983 6 5J4771a 2J3506
5P-LGP 6PH, 9XH, 8NP FD 0.62 16 2 6Y5842 8 3F5108b 4K0367
2SH, 1YH FD 0.75 19 2 4T2315 10 5J4773a 2J3506
4FP FD 0.62 16 2 4T8940 8 5J4773a 2J3506
8ZP FD 0.62 16 2 142-4914 8 3F5108a 4K0367
5SU 7BH FD 0.75 19 1 4T6659 7 5J4773a 2J3506
2 9U8057 4
C — Center Edge E — End Edge FD — Finish Dozing a Uses 5P8248 washers.
♦ Petroleum field blade. b Uses 5P8247 washers.
33
Bulldozers / Compactors
D5 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts
5A 91H, 96H, 42K, 9F7075/6 0.75 19 4T3049/50 6c 3F5108 4K0367
11J, 13J, 98H, 3G8295/6 0.88 22
93H1-3846,
93H3847-UP, 4J8261/2 0.75 19 4T3041/2 6c 4F7827 2J3506
6RH 3G8297/8 0.88 22
9W9010/11 1.00 25
3AH, 2FH, 2TH 4T5407/8 140-6787/8# 0.88 22 8E9379/8** 4c 5J4773a
5S 90H, 92H, 97H, 9F7073/4 0.75 19 4T3051/2 6c 3F5108b 4K0367
10J, 12J, 16K, 3G8321/2 0.88 22
19R
2BH, 4FH 4T5407/8 140-6787/8# 0.88 22 8E9379/8** 4c 5J4773a 2J3506
5S-Pet♦ 4AH 4T5407/8 140-6787/8# 0.88 22 8E9379/8** 4c 5J4773a 2J3506
5S-LGP 1ZH, 3KH 4T5407/8 140-6787/8# 0.88 22 8E9379/8**
5P 6MH, 9WH, 8GP 8E7078/9 4c 5J4771a 2J3506
6JP, 2AH, 2MH, 7AH 4T5407/8 140-6787/8# 0.88 22 8E9379/8** 4c 5J4773a
5P-LGP 6PH, 9XH, 8NP, 8ZP 6Y5839/40 3c 3F5108b 4K0367
1YH, 2SH 4T5407/8 140-6787/8# 0.88 22 8E9379/8** 4c 5J4773a 2J3506
5SU 7BH 4T5407/8 140-6787/8# 0.88 22 8E9379/8 4c 5J4773a 2J3506
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 9F = Impact. a Uses 5P8248 washers. c Quantity per end bit.
** Has angled outer corner. May substitute (2) 3G4285 with straight outer corner. b Uses 5P8247 washers. ♦ Petroleum Field blade.
# Hot cupped end bits.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
5A 91H, 96H, 42K Wear Plates 5 1J3106 0.38 10
93H, 98H, 11J, 13J 6 1J3106
5S 90H 5 1J3108
92H, 97H, 10J, 12J, 19R 6 1J3108
2BH 4 2J8526
5P 2AH, 4GP, 6JP 5 3J3740
D4 0
34
Bulldozers / Compactors
D4 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
4A 12D, 78D, FD 0.62 16 1 4T2977 18 4F3654 4K0367
05F1-2850
05F, 97E, FD 0.62 16 1 4T2979 13
24F, 65F
10D, 79D, FD 0.62 16 1 4T2981 23
06F1-11299
52E, 96E, 26F, FD 0.62 16 1 4T2974-C 5
06F11300-UP, 2 4T2973-E 6
95G, 33R
6AC, 2GC FD 0.62 16 2 4T8940 8 5J4773* 2J3506
4S 04A, 40D FD 0.62 16 1 4T2977 18 4F3654 4K0367
GD 0.75 19 1 4T3021
67E, 27F, 94G FD 0.62 16 1 4T2983-C 3 4F3654
2 4T2972-E 4
GD 0.75 19 1 4T3027-C 3
2 4T3028-E 4
02A, 25F, 67F FD 0.62 16 1 4T2980 15 4F3654
93C FD 0.62 16 1 8A8580-C 7
2 8A8581-E 4
2TC, 3CH, 3DC FD 0.62 16 2 4T3720 6 5J4773* 2J3506
4S-LGP 4HC FD 0.62 16 2 4T8940 8 5J4773* 2J3506
84E, 19J, 45J EWL 0.77 19 2 4T3028 4 4F3654 4K0367
0.77 19 1 4T3029 7
FD 0.62 16 2 4T2972 4 4F3654
0.62 16 1 4T2982 7
4P 6CH FD 0.62 16 2 6Y5841 6 3F5108 4K0367
2YH FD 0.62 16 2 4T6230 6 3F5108 4K0367
9ZB, 4AC, FD 0.62 16 2 3G9306 6 5J4773* 2J3506
5NH, 7EH
9SH FD 0.62 16 2 104-9634 6 3F5108 4K0367
8LP FD 0.62 16 2 140-2187 6 3F5108 4K0367
4P-LGP 4GH, 9YH, 8ZH FD 0.62 16 2 4T6232 8 3F5108 4K0367
5EC, 5RH, 7CH FD 0.62 16 2 4T8940 8 5J4773* 2J3506
6DH, 9TH, 8MP FD 0.62 16 2 6Y5842 8 3F5108 4K0367
8YP FD 0.62 16 2 141-2238 8 3F5108 4K0367
4PXL 6XH FD 0.62 16 2 8E9377 7 5J4773* 2J3506
GD 0.77 19 2 4T6659 7 5J4773* 2J3506
C — Center Edge E — End Edge FD — Finish Dozing EWL — Extended Wear Life GD — General Duty
* Uses 5P8248 washers.
35
Bulldozers / Compactors
D4 BULLDOZERS
END BITS
GD*
Blade Blade EWL Thickness Finish Hardware
Model Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts
4A 10D, 12D, 78D, 5A4565/6 0.88 22 4T3043/4 3c 3F5108 4K0367
79D, 52E, 96E,
97E, 05F, 06F,
24F, 26F, 65F,
95G, 33R
6AC, 2GC 4T5407/8 140-6787/8** 0.88 22 8E9379/8b 4c 5J4773a 2J3506
4S, 02A, 04A, 93C, 9F7073/4 0.75 19 4T3051/2 6c 3F5108 4K0367
4S-LGP 40D, 67E, 84E, 3G8321/2 0.88 22
25F, 27F, 67F,
94G, 19J, 45J
3DC, 2TC, 4HC, 4T5407/8 140-6787/8** 0.88 22 8E9379/8b 4c 5J4773a 2J3506
3CH
4P, 6DH,4GH, 8LP, (2) 4T6229 3c 3F5108 4K0367
4P-LGP 9YH, 8ZH, 8MP, Straight Corner
6CH, 4AC, 2YH, or 6Y5839/40a
9TH, 9SH, 8YP Angled Corner
9ZB, 5EC, 7CH, 4T5407/8 140-6787/8** 0.88 22 8E9379/8b 4c 5J4773a 2J3506
5RH, 5NH
4PXL 6XH 4T5407/8 140-6787/8** 0.88 22 8E9379/8b 4c 5J4773a 2J3506
* Part numbers that begin with: 3G = Hot cupped, Abrasion.
9F, 5A = Impact.
** Hot cupped end bits.
a Uses 5P8247 washers.
b Has angled outer corner. May substitute (2) 3G4285 with straight corner.
c Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
4A 10D, 79D, 52E, 96E, Wear Plates 1 3J3115 0.31 8
06F, 26F, 95G, 33R
12D, 78D, 97E, 05F, 2 3J3116
24F, 65F
4S 02A, 25F, 67F 2 3J3114
67E 1 3J3117
4P 9ZB, 4GH, 9SH, 4AC, 4 3J3116
5NH, 7EH, 6DH, 9TH,
6YH, 8LP
36
Bulldozers / Compactors
D3 BULLDOZERS
CUTTING EDGES
Blade Blade Thickness Hardware
Model Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts
3P 9RH, 1GP, FD 0.62 16 2 4T6230 6 3F5108 4K0367
85U, 6EH,
2JP, 5LH
8HP, 8KP FD 0.62 16 2 6Y5841 6
3S, 3S-LGP 15W, 31M, FD 0.62 16 2 4T6231 7
86U, 40V, 6EH 4T6232 8
3P-LGP 5WH, 96X, 8JP FD 0.62 16 2 4T6232 8
8XP FD 0.62 16 2 141-0413 8 3F5108 4K0367
Super SLGP 5LH FD 0.62 16 2 4T6230 6 3F5108 4K0367a
1 4T6231 7
Narrow PLGP FD 0.62 16 2 157-7338 7 3F5108 4K0367
a Use 5P8247 washers. FD — Finish Dozing
END BITS
Blade Blade Thickness Hardware
Model Ser. Number Finish inches mm Qty. Bolt Nut
3P 8HP, 8KP, 2JP, 9RH, 85U, 6EH, (2) 4T6229b 0.62 16 3c 3F5108 4K0367
96X, 1GP, 5LH or
3S, 3S-LGP 15W, 31M, 40V, 86U, 6EH 6Y5839/40a
3P-LGP 5WH, 8XP
a Have angled outer corner.
b Straight corner.
c Quantity per end bit.
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
3P-LGP 85U1-8375 Wear Plates 3 3J3114 0.31 8
85U8376-UP or 1 3J3117
2 3J3116
or 5 1J3108
37
Bulldozers / Compactors
800 SERIES BULLDOZERS
CUTTING EDGES
Blade Blade Blade Thickness Hardware
Model Type Ser. Number inches mm Qty. Part Qty. Bolts Nuts Washers
854 SU, GD 3WL, 3TL* 45 1.77 4 9W6658** 5 5P8823 3K9770 4K0684
(Tiger 2 9W6657** 5
790) U-Coal, GD 3WL, 3TL* 45 1.77 3 7J2966 7 4J9208 2J3507 5P8250
2 135-9671 8
SU, EWL 3WL, 3TL* 60 2.36 4 8E2087** 5 5P8823 3K9770 4K0684
2 8E2086** 5
Tiger U-Coal, GD 3WL, 3TL* 35 1.38 2 9W4398 5 4J9208 2J3507 5P8250
690 2 7T9126 9
2 9W6092 6
U-Coal, EWL 3WL, 3TL* 40 1.57 2 9W3927 5
2 9W4507 9
2 7J2959 6
SU, GD 3WL, 3TL* 45 1.77 3 6Y0018 9 5P8823 3K9770 4K0684
2 9W6657 5
SU, EWL 3WL, 3TL* 60 2.36 3 6Y0023 9
2 8E2086 5
844 U-Coal, 3WL, 3TL* 28 1.10 2 6Y5540 5 4J9058 2J3507 5P8250
(Tiger EWL 2 4T6386 7
590) 1 4T6378 6
U-Coal, 3WL, 3TL* 35 1.38 2 7T9125 5
EWL 1 9W6092 6
2 9W4500 7
SU, GD Australian 45 1.77 3 9W3928 6 5P8823 3K9770 4K0684
2 9W6657 5
SU, EWL 3WL, 3TL* 2 9W3927 5 4J9058 2J3507 5P8250
2 112-2475 6
1 7J2980 7
SU, EEWL Australian 60 2.36 3 135-9625 6 5P8823 3K9770 4K0684
2 8E2086 5
836 None 1.00 25 3 4T2889 9 6F0196 2J3505
835, S 27K, 36G, 1.00 25 2 4T6515# 12 5J2409
834 96G
834 U 14B 1.00 25 2 4T8797-C 6 6F0196
2 4T8798-E 7
834C, 834B, 64G 1.00 25 2 4T2889 9 6F0196
824C
834, 825, 93G 1.00 25 1 4T6531-C 10 6F0196
824 2 4T6532-E 6
826, 826C, 97X, 90K, 1.00 25 2 4T6515 12 5J2409 2J3505
826G 2GP
825C F 89X 1.00 25 3 4T6238 8 4F4042 2J3507
825G 4JP 1.00 25 4 4T6532 6 6F0196 2J3505
824C, S 35G 1.00 25 2 4T6514 10 5J2409 2J3505
824G 2HP 1.00 25 2 4T3420 5 6F0196 2J3505
2 122-9227 6
824S 88H 1.13 29 2 4T6448 10 4J9058 2J3507
816, 816F 51K 1.00 25 1 4T6531-C 10 6F0196 2J3505
2 4T6532-E 6
41S, 15Z, 0.75 19 1 4T2922-C 5 5J2409
3ZP 2 4T2923-E 7
C — Center Edge E — End Edge (Chart continued on next page)
* Balderson serial number.
** Australian built blades use a 6V8360 bolt.
# Optional 12" (305 mm) wide one piece edge 4T6455 is available.
38
Bulldozers / Compactors
800 SERIES BULLDOZERS
END BITS
General Duty (GD)*
Blade Blade Thickness Finish Hardware
Model Type Ser. Number (R-L) inches mm (R-L) Qty. Bolts Nuts Washers
854 U-Coal 3WL**, 3TL** 1.57 40 135-9672/3*** 5 4J9208 2J3507 5P8250
(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3131/2 7 5P8823 3K9770 4K0684
790) 8E4198/9 2.17 55
SU, EWL 3WL**, 3TL** 2.36 60 100-3133/4 7
8E4541/2 2.76 70
Tiger U-Coal, GD 3WL**, 3TL** 1.38 35 135-9698/9 6 4J9208 2J3057 5P8250
690 SU, GD 3WL**, 3TL** 8E4199/8 2.17 55 7 5P8823 3K9770 4K0684
SU, EWL 3WL**, 3TL** 2.76 70 8E4541/2 7
844 U-Coal 3WL**, 3TL** 1.10 28 135-9669/70 5 4J9058 2J3507 5P8250
(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3135/36 7 4J9058 2J3507 5P8250
590) 8E4196/7 1.97 50
Australian 2.17 55 8E4199/8 7 5P8823 3K9770 4K0684
SU, EWL 3WL**, 3TL** 2.36 60 100-3137/8 7 4J9058 2J3507 5P8250
8E4539/40 2.56 65
Australian 2.76 70 8E4541/2 7 5P8823 3K9770 4K0684
835, 834 27K, 14B, 36G 3G8293/4 0.88 22 4T6505/6 7a 6F0196 2J3505
64G, 93G, 96G 4J8843/4 1.12 28
3G8315/6 1.12 28
826, 826C, 97X, 90K,
826G 2GP, 93G
825G 4JP
825C 89X 3G8317/8 1.18 30 4T6239/40 7a 4F4042 2J3507
3G8287/8 1.12 28
9J1477/8 1.12 28
824S, 824G 35G, 64G, 93G 3G8293/4 0.88 22 4T6505/6 7a 6F0196 2J3505
2HP 4J8843/4 1.12 28
3G8315/6 1.12 28
88H 5J1279/80 1.25 32 7a 4J9208 2J3507
3G8289/90 1.38 35
3G8281/2 1.57 40
816, 814S, 56D, 51K, 23K 3G8293/4 0.88 22 4T6505/6 7a 6F0196 2J3505
814F, 816F 4J8843/4 1.12 28
3G8315/6 1.12 28
36S, 41S, 4T6241/2 7a 5J2409
3YP, 3ZP
815S, 815F 39S 3G8319/20 0.88 22 4T3045/6 6a 5J4773 2J3506
5J1419/20 0.88 22
24K1-1044 9F7075/6 0.75 19 4T3049/50 6a 3F5108 4K0367
59E1-341 3G8295/6 0.88 22
24K1045-UP 4J8261/2 0.75 19 4T3041/2 6a 4F7827 2J3506
59E342-UP 3G8297/8 0.88 22
* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact.
** Balderson serial number.
*** End bit and edge.
a Quantity per end bit.
39
Bulldozers / Compactors
800 SERIES BULLDOZERS
40
Bulldozers / Compactors
800 SERIES BULLDOZERS
WEAR PLATES
Blade Blade Thickness
Model Ser. Number Location Qty. Part inches mm
835 27K Wear Plate 1 3J3141 0.31 8
834C 96G Wear Plate 1 3J3142 0.31 8
834C 64G Push Plate 1 4J5622 0.79 20
826 97X, 90K Wear Plate 1 3J3141 0.31 8
825 89X, 93G
824C 64G Push Plate 1 4J5622 0.79 20
824C, 824G 2HP, 35G Wear Plate 1 5J2663 0.79 20
824F 93G Wear Plate 1 3J3141 0.31 8
824 88H Wear Plate 4 2J8523 0.47 12
2 6J0164
816 41S, 51K Wear Plate 1 3J3141 0.31 8
SOLE PLATES
Blade Blade Blade Thickness Hardware
Model Type Ser. Number inches mm Qty. Part Qty.* Bolts Nuts Washers
854 GD Australian 1.77 45 4 9W6658*** 5 6V8360 3K9770 4K0684
(Tiger 2 9W6657***
790) SU, EWL 3WL, 3TL** 1.97 50 4 135-9668 7 3R2299 3K9770 4K0684
U, GD 3WL, 3TL** 1.97 50 5 135-9668 7
SU, EWL Australian 2.36 60 4 8E2087*** 5 6V8360 3K9770 4K0684
2 8E2086*** 5
Tiger 690 SU, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R2299 3K9770 4K0684
844 SU, GD Australian 1.77 45 3 9W3928 6 6V8360 3K9770 4K0684
(Tiger 2 9W6657 5
590) SU/U, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R2299 3K9770
SU, EWL Australian 2.36 60 3 135-9625 6 6V8360 3K9770 4K0684
2 8E2086 5
834 U 14B 1.00 25.4 2 4T8799 7 6F0196 2J3505
S 36G, 96G 1.00 25.4 2 4T6650 8 5J4772 2J3505
1 4T6651 9
834, 824 C 64G 1.00 25.4 2 4T6645 6
824G S 2HP 1.00 25.4 3 4T8799 7
824 S 35G1-222 1.00 25.4 3 7T3491 7 5J4773 2J3506
35G 223-UP 1.00 25.4 3 7T3492 7
814 S 36S, 3YP 0.75 19 2 4T3018 4
23K, 56D 0.75 19 2 4T3019 5
* Per plate.
** Balderson serial number.
*** Australian built edges use a 6V8360 bolt.
41
Bulldozers / Compactors
COMPACTORS
COMPACTOR FEET (EARTHMOVING)
Rock
Machine Tractor Tamping Tamping
Model Ser. Number Foot Foot Base Pin
835 44N1-332 7K2939♦ 7K2939 9S1645 7K9535
44N333-UP 8K9171* 7K7071
834 43E 7K2939♦ 7K2939 9S1645 7K9535
825B 43N 7K2939♦ 9S1645 7K9535
825C 86X 8K9171* 7K7071
2V6628** 4V0668 7K7071
825G 6RN 7K2939♦ 9S1645 7K9535
824B 36H 7K2939♦ 7K2939 9S1645 7K9535
815F 1GN 2V7053 7K6908
815B 17Z
815 91P
815F 1GN 8K9189*** 4V3851 7K6908
815B 17Z
815 91P
All compactor tip options are weld-on except as footnoted.
* Bolt-On; uses 2-0T0856 bolts, 2-6B6682 nuts and 4-5H1504 washers.
** Uses 2-0T0856 bolts, 2-6B6682 nuts and 4-5H1504 washers.
*** Bolt-On; uses 2-8K9163 bolts, 2-7H3607 nuts and 2-5S0581 washers.
♦ Pin-On; uses pin listed, also requires a 9S1644 Spring Assembly and 5S1522 Snap Ring.
42
Bulldozers / Compactors
COMPACTORS
COMPACTORS (LANDFILL)
ARM**
Machine Tractor Traction Plus Tip* Chopper Blade
Model Ser. Number Tip Weld-On Blade Support
836, 836G 3RL, 7FR, 7MZ a(35) 107-3295 a(28) 107-3374 a(14) 2V6400
a(14) 2V6401
826B, 826C 58U, 87X a(45)107-3487 RH*** a(25) 107-3295 a(24) 6Y4321 a(12) 2V6400
a(45)107-3488 LH*** a(12) 2V6401
a(44)107-3487 RH****
a(44)107-3488 LH****
826 97X a(40) 107-3487 RH a(20) 107-3295 a(20) 6Y6766 a(10) 2V6400
a(40) 107-3488 LH a(10) 2V6401
826G 7LN, AYH a(45)107-3487 RH*** a(25) 107-3295 a(24) 6Y4321 a(12) 2V6400
a(45)107-3488 LH*** a(12) 2V6401
a(44)107-3487 RH****
a(44)107-3488 LH****
816, 816B 5FN, 15Z, 57U a(40) 107-3487 RH a(20) 107-3295 a(20) 6Y6766 a(10) 2V6400
816F a(40) 107-3488 LH a(10) 2V6401
NOTE: For Wear Life estimation use Plus Tip Wear Guage 8E1849 with Special Instructions.
* For template and welding information, see special instruction SEHS9324 for 816, SEHS9325 for 826.
** For template information, see special instruction SEHS9905 for 816, 826 (48" wheels) SEHS9895, 826 (40" wheels) SEHS9916.
*** 48" wheels.
**** 40" wheels.
a Tips per wheel.
43
Bulldozers / Compactors
BULLDOZER BLADES
Caterpillar bulldozer blades are designed for tough manufactured to specifications that provide long wear
dozing, reclamation and push-loading jobs. They are life and the strength necessary to be compatible with
available in six configurations. (See descriptions the increased productivity of Caterpillar bulldozer blades.
below.) Cutting edges and end bits are designed and
Straight (S) Blade is a good general purpose blade for Cushion (C) Blade is a relatively narrow blade designed
most dozing applications. primarily for pushing scrapers.
Universal (U) Blade is designed with large “wings” to Power Angling and Tilt (P or PAT) Blade is the most
more efficiently carry large loads over long distances. versatile blade. Available for D6 and smaller models.
Available only for D7 and larger models.
Angle (A) Blade is an economical, light to medium
Semi-U (SU) Blade is basically a straight blade with duty blade designed for use on D8 and smaller machines
small wings to provide a blade with better load carry- where the ability to side-cast is desired.
ing characteristics. Available for D5 and larger models.
CUTTING EDGES
Features Benefits
✔ Made from rolled DH-2 steel. ✔ High strength to resist breaking.
✔ Thru-hardened. ✔ Maximum wear life.
✔ Optional thicknesses. ✔ Permits matching edge to job.
✔ Multi-section for wide blades. ✔ Easier handling and storage. Sections can be replaced,
switched, or propellered to get maximum use.
44
Bulldozers / Compactors
BULLDOZER END BITS
END BITS
EWL
General Duty (GD) — have a contoured design which matches the cut-
ting edge thickness in the bolt hole area and is thicker, but not as thick as
the EWL, in the wear area that extends beyond the support. They are well
suited to most dozing applications (9W, 8E part numbers in GD column).
It is made from thru-hardened DH-3 steel for the D7-D11 machines and
thru-hardened DH-2 steel for the D3-D6 machines.
General Duty
Utility — have a flat plate design for use in applications where face wear
is a problem or where initial price is the main purchase criteria. Provides
good corner protection in high impact, high abrasion materials. It is made
from thru-hardened DH-2 rolled plate steel.
Finish Dozing (Level Cut) — match the depth of cut of the cutting
edges and protect the blade corner in low impact, low abrasion materials.
They are recommended for finish and semi-finish dozing. Not available for
the largest dozers. It is made from thru-hardened DH-2 rolled plate steel.
Finish Dozing
45
Bulldozers / Compactors
BULLDOZER END BITS AND EDGES
Heavy Duty Mining End Bits and Edges — for high-abrasion and/or
high-impact applications where penetration is not a problem. These sys-
tems will significantly extend edge and end-bit life and provide increased
resistance to breakage.
This is a three-piece system with a center edge 2-3/8" (60 mm) thick, and
right- and left-end edge/end-bits which are 4-3/4" (120 mm) thick. The
end-edge/end-bits are made from two 2-3/8" (60 mm) thick sections
welded together at the end-bit position. Thicker end bits are required to
match end bit to cutting-edge wear patterns.
Heavy Duty Mining
The heavy duty options are made from Caterpillar DH-2 flat-plate sections
which are through-hardened for superior strength and wearlife capabilities.
46
Bulldozers / Compactors
BULLDOZERS
Cat cutting edge hardware meets or exceeds requirements for SAE Grade 8
threaded fasteners. Bolt heads are dome-shaped for added strength and
wear-resistance. Nuts are thru-hardened to match the strength of the bolts.
See page 490 for hardware data and part numbers.
Wear plates and push plates provide an inexpensive way to prolong bull-
dozer service life. Both types of plates are formed of high strength alloy
steel. They are curved to fit the contour of the moldboard and are easily
attached with fillet welds.
Wear Plates
Used to repair damage to small areas or to resurface an entire moldboard.
In extremely abrasive or severe impact conditions, it may even be desir- Wear Plates
able to install wear plates on new dozers before they are put into service.
Push Plates
Push plates are installed on dozers used for the dual purpose of push load-
ing scrapers and for dozing.
Push Plates
Dozer wear bars come in six lengths to allow a customer to tailor the
placement of the wear protection while minimizing the amount of throw-
away iron. Part numbers for the various lengths are shown below:
Length
Part Number Feet mm Wear Bars
107-3386 8 2438
107-3387 9 2743
107-3388 11 3353
107-3389 12 3658
107-3390 13 3962
107-3391 15 4572
Dozer wear bars are made from DH-2 steel alloy, through-hardened for
greater wear resistance and strength. Core hardness of the bars will be
between 45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn
zone must be preheated to 150-230°C. It is also recommended to preheat the
bars to the 150-230°C temperature when welding on top of the liner. The
bars are to be positioned so the bevel is next to the liner as shown at right.
47
Bulldozers / Compactors
BULLDOZERS
COMPACTORS (EARTHMOVING)
Caterpillar offers three tip options for earth-fill compactors, each designed
for effective compaction in different materials.
Tamping Foot
Caterpillar tamping feet are designed for use in low impact conditions.
They are manufactured from DH-2 Steel and heat-treated for strength and
long wear life.
COMPACTORS (LANDFILL)
Caterpillar offers one blade and two tip options for landfill compactors.
¢¢¢
;;;
QQQ
¢Q;¢¢¢
;;;
QQQ
¢Q;¢Q;
Traction Tip
Designed for applications where maximum traction is required. Perform
¢Q;
best in frozen or other difficult to penetrate applications. These tips are
forged for maximum strength and Abrasion Resistant Material (A.R.M.) is
applied to critical wear areas.
48
Bulldozers / Compactors
BULLDOZERS
49
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
Outline
A) Determine cutting edge dimensions.
B) Select cutting edges from dimensional charts.
C) Select end bits from dimensional charts.
D) Modify cutting edges and/or end bit support if necessary.
E) Install System.
D C B T
Obtain the following dimensions from the competitive edges as
TYPE 2 shown on the drawings.
1. Length (L)
L 2. Width (W) — Original width is best obtained from competitive
W
A literature or parts books. If that is not possible, find a new edge
B C D T
or one that is only half worn. Measure the width from bolt hole
TYPE 3 centers to unworn surface and double that dimension. As a last
(Edges with offset bolt holes only)
resort, measure the cutting edge support from the center ring of
the bolt holes to the point where the support begins to curve.
L Usually this point is where the moldboard is welded to the sup-
A port. See Figure 1. This is dimension “X” in Figure 1. Double it
W
to determine the approximate maximum edge width which can
D C B T be used.
TYPE 4
Some bulldozers have cutting edges that bolt directly to the
Moldboard
moldboard as shown in Figure 2. In this case, measure from the
Cutting Edge
Support
center line of the bolt holes to the point where the moldboard
begins to curve. This point is determined by laying a straight
edge on the moldboard and sliding it upward until it no longer
X lays flat on the moldboard. This measurement is “Y” in Figure 2.
Double the value of “Y” to determine the maximum width edge
which can be used.
CAUTION: Before modifying edges to fit a competitive bulldozer,
Y
FIGURE 1 bolt an edge of the width selected to the bulldozer to
make sure that the edges will bolt up properly.
FIGURE 2
50
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
6. Bolt Size Required — Sometimes it is necessary to drill supports oversize to accept Caterpillar
edges.
7. Number of Bolt Holes — Count only the bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing.
Some competitive bulldozers and some edges for Cat D10 and D11 Bulldozers have extra bolt
holes between the last two on the ends of the edges. As a result, the last three holes on each end
are 3" (76.2 mm) apart. The dimensional tables included in this guide ignore the extra holes. Do
not worry about them when measuring competitive edges.
Once all pertinent dimensions are obtained, go to Step 3.
Step 3
Refer to the Bulldozer Cutting Edge Conversion Tables. Find the section of the chart which most
closely matches the maximum edge width (W) needed.
NOTE: Do not select a chart which exceeds the maximum edge width by more than 0.75" (19 mm).
Find an edge with the same bolt hole size and spacing, and total length needed ±0.25" (7 mm).
Make sure that the edge thickness is close to what is correct for the machine.
If no edge can be found, go to Step 4.
Step 4
Find an edge with the same hole size and spacing, but longer length. Cut the edge to size.
NOTE: It may be possible to reduce waste by making two edges to fit competitive machines from
one Caterpillar edge. To determine if this can be done, add the number of bolt holes on
4" (101.6 mm) or 6" (152.4 mm) spacing from both competitive edges.
51
Bulldozers / Compactors
BULLDOZER CONVERSION PROCEDURE
52
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
53
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
54
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
55
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
56
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
57
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
58
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
59
Bulldozers / Compactors
BULLDOZERS
L L L L
A A A A
W W W W
D C B T D C B T B C D T D C B T
TYPE 1 TYPE 2 TYPE 3 TYPE 4
(Edges with offset bolt holes only)
60
Bulldozers / Compactors
BULLDOZER END BITS CONVERSION PROCEDURE
Cutting
End Bit Edge
Support Widths End Bits (R-L)
9J6977 16" 7T4097-6, 7T4689-8
13" 3G7763-4, 1U1545-6
4T9579 16" 7T4094-5
13" 3G8283-4, 3G8291-2, 4J8723-4
3G6415 13" 7T4091-90
10" 3G8287-8, 3G8317-8, 9J1477-8, 4T8089-90
61
Bulldozers / Compactors
DIMENSIONS — BULLDOZER END BITS
L1 The following illustrations show the different types of bolt hole patterns. In
C D E F G the following charts, the type is coded to better describe the end bit. The key
A
to the code is in the following example:
W1 W2
Type 2 E L
L2
L stands for left side and
TYPE 1 R means right side end bit.
B
W1 W2
G H I J
L2
TYPE 3
L1
A
C D E F
B
W1 W2
G H I J K
L2
TYPE 4
62
BULLDOZER END BIT DIMENSIONS
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
15.98 13.50 3EL 0.98 2.76 7T4092 2.65 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 20.55 27.64 18.56
(406.0) (343.0) (25.0) (70.0) (67.4) (82.6) (176.3) (101.6) (101.6) (62.0) (82.6) (165.1) (82.5) (522.0) (702.0) (471.5)
15.98 13.50 3ER 0.98 2.76 7T4093 2.65 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 20.55 27.64 18.56
(406.0) (343.0) (25.0) (70.0) (67.4) (82.6) (176.3) (101.6) (101.6) (62.0) (82.6) (165.1) (82.5) (522.0) (702.0) (471.5)
15.9 14.17 4UL 1.125 8E9748 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.70 30.31 15.55
(406.0) (360.0) (36.5) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (653.0) (770.0) (395.0)
15.9 14.17 4UR 1.125 8E9749 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.70 30.31 15.55
(406.0) (360.0) (36.5) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (653.0) (770.0) (395.0)
15.9 14.60 4UR 1.125 2.36 8E9785 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.53 30.31 15.59
(406.0) (371.0) (36.5) (60.0) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (648.5) (770.0) (396.0)
15.9 14.60 4UL 1.125 2.36 8E9786 2.48 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.53 30.31 15.59
(406.0) (371.0) (36.5) (60.0) (63.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (648.5) (770.0) (396.0)
15.9 16.22 3ER 1.25 3.35 8E4545 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.43 32.32 20.37
(406.0) (412.0) (32.0) (85.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (646.0) (821.0) (517.5)
15.9 16.22 3EL 1.25 3.35 8E4546 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.43 32.32 20.37
(406.0) (412.0) (32.0) (85.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (646.0) (821.0) (517.5)
15.9 15.82 4GR 1.25 2.76 8E4543 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.39 33.84 21.06
(406.0) (402.0) (32.0) (70.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (645.0) (859.5) (535.0)
15.9 15.82 4GL 1.25 2.76 8E4544 2.05 4.25 2.01 2.95 9.29 2.95 2.97 2.95 7.64 2.95 2.95 25.39 33.84 21.06
(406.0) (402.0) (32.0) (70.0) (52.0) (108.0) (51.0) (75.0) (236.0) (75.0) (75.5) (75.0) (194.0) (75.0) (75.0) (645.0) (859.5) (535.0)
15.9 15.82 3EL 1.25 2.76 8E4542 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 22.71 28.42 18.42
(406.0) (402.0) (32.0) (70.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (722.0) (468.0)
15.9 15.82 3ER 1.25 2.76 8E4543 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 22.71 28.42 18.42
(406.0) (402.0) (32.0) (70.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (577.0) (722.0) (468.0)
15.9 15.9 3UR 1.25 1.77 100-3131 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (45.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UL 1.25 1.77 100-3132 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (45.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UR 1.25 2.36 100-3133 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (32.0) (60.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 15.9 3UL 0.98 2.36 100-3134 3.81 3.94 3.11 7.08 2.95 2.00 2.95 7.08 2.95 22.49 27.04 15.98
(406.0) (406.0) (25.0) (60.0) (97.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (571.5) (687.0) (406.0)
15.9 14.65 5GL 1.25 2.17 8E4198 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 21.50 28.70 19.17
(406.0) (372.0) (32.0) (55.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (546.0) (729.0) (487.0)
15.9 14.65 5GR 1.25 2.17 8E4199 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 21.50 28.70 19.17
(406.0) (372.0) (32.0) (55.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (546.0) (729.0) (487.0)
15.9 13.78 3EL 0.98 2.76 7T4094 2.65 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.72 24.80 18.56
(406.0) (350.0) (25.0) (70.0) (67.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (450.0) (630.0) (471.5)
15.9 13.78 3ER 0.98 2.76 7T4095 2.65 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.72 24.80 18.56
(406.0) (350.0) (25.0) (70.0) (67.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (450.0) (630.0) (471.5)
15.74 13.46 3HR 1.25 2.36 7T4688 2.05 3.94 3.11 7.08 2.95 2.01 4.96 7.08 2.95 19.99 27.20 17.79
(400.0) (342.0) (32.0) (60.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (126.0) (180.0) (75.0) (508.0) (691.0) (452.0)
DIMENSIONS — BULLDOZER END BITS
Bulldozers / Compactors
63
BULLDOZER END BIT DIMENSIONS continued
64
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
15.74 13.46 3HL 1.25 2.36 7T4689 2.05 3.94 3.11 7.08 2.95 2.01 4.96 7.08 2.95 19.99 27.20 17.79
(400.0) (342.0) (32.0) (60.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (126.0) (180.0) (75.0) (508.0) (691.0) (452.0)
13.14 12.99 3FR 0.98 1.57 6Y4277 3.20 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.51 23.30 12.99
(334.0) (330.0) (25.0) (40.0) (81.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (445.0) (592.0) (330.0)
13.14 12.99 3FL 0.98 1.57 6Y4278 3.20 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.51 23.30 12.99
(334.0) (330.0) (25.0) (40.0) (81.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (445.0) (592.0) (330.0)
12.99 12.99 1F 0.98 1.12 4T6389 6.50 4.82 3.00 3.76 3.76 3.00 23.17 23.17 12.99
(330.0) (330.0) (25.0) (28.5) (165.0) (122.5) (76.2) (95.5) (95.5) (76.2) (588.4) (588.4) (330.0)
12.99 12.40 3G 0.98 1.97 9W9193 1.87 3.25 6.94 4.00 4.00 2.44 3.25 6.49 3.25 21.50 27.59 16.38
(330.0) (315.0) (25.0) (50.0) (47.4) (82.6) (176.3) (101.6) (101.6) (62.0) (82.6) (165.1) (82.5) (546.0) (701.0) (416.0)
Bulldozers / Compactors
12.99 12.44 3UR 1.25 1.375 3G7763 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.94 24.02 14.25
(330.0) (316.0) (32.0) (35.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (532.0) (610.0) (362.0)
12.99 12.44 3UL 1.25 1.375 3G7764 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.94 24.02 14.25
(330.0) (316.0) (32.0) (35.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (532.0) (610.0) (362.0)
DIMENSIONS — BULLDOZER END BITS
12.99 12.44 3HR 1.25 1.57 1U1545 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.47 26.65 14.25
(330.0) (316.0) (32.0) (40.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (520.0) (677.0) (362.0)
12.99 12.44 3HL 1.25 1.57 1U1546 2.05 3.94 3.11 7.09 2.95 2.01 2.95 7.09 2.95 20.47 26.65 14.25
(330.0) (316.0) (32.0) (40.0) (52.0) (100.0) (79.0) (180.0) (75.0) (51.0) (75.0) (180.0) (75.0) (520.0) (677.0) (362.0)
12.99 12.75 3HR 0.98 1.57 3G8281 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (40.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HL 0.98 1.57 3G8282 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (40.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HR 0.98 1.38 3G8289 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (35.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.75 3HL 0.98 1.38 3G8290 2.73 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 19.99 26.81 15.70
(330.0) (324.0) (25.0) (35.0) (69.5) (82.6) (176.5) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (508.0) (681.0) (399.0)
12.99 12.24 3IR 0.98 1.24 5J1279 2.75 3.24 6.94 4.00 4.00 2.44 3.24 6.51 3.24 19.38 22.99 13.75
(330.0) (310.9) (25.0) (31.5) (70.1) (82.3) (176.3) (101.6) (101.6) (62.0) (82.3) (165.6) (82.3) (492.3) (584.2) (349.5)
12.99 12.24 3IL 0.98 1.24 5J1280 2.75 3.24 6.94 4.00 4.00 2.44 3.24 6.51 3.24 19.38 22.99 13.75
(330.0) (310.9) (25.0) (31.5) (70.1) (82.3) (176.3) (101.6) (101.6) (62.0) (82.3) (165.6) (82.3) (492.3) (584.2) (349.5)
12.99 13.18 3ER 0.98 2.56 8E4539 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 19.13 23.89 15.47
(330.0) (335.0) (25.0) (65.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (486.0) (607.0) (393.0)
12.99 13.18 3EL 0.98 2.56 8E4540 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 19.13 23.89 15.47
(330.0) (335.0) (25.0) (65.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (486.0) (607.0) (393.0)
12.99 12.99 3UR 0.98 1.77 100-3135 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (45.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UL 0.98 1.77 100-3136 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (45.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UR 0.98 2.36 100-3137 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (60.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
12.99 12.99 3UL 0.98 2.36 100-3138 3.12 3.25 3.61 4.00 4.00 2.36 3.25 3.25 3.25 19.09 22.90 12.99
(330.0) (330.0) (25.0) (60.0) (79.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (485.0) (581.7) (330.0)
BULLDOZER END BIT DIMENSIONS continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
12.99 12.99 3UR 0.98 1.97 100-3139 3.00 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 18.18 21.90 12.99
(330.0) (330.0) (25.0) (50.0) (76.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (462.0) (556.5) (330.0)
12.99 12.99 3UL 0.98 1.97 100-3140 3.00 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 18.18 21.90 12.99
(330.0) (330.0) (25.0) (50.0) (76.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (462.0) (556.5) (330.0)
12.99 12.79 3ER 0.98 2.17 8E4532 1.66 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.95 22.40 14.96
(330.0) (325.0) (25.0) (55.0) (42.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (456.0) (569.0) (380.0)
12.99 12.79 3EL 0.98 2.17 8E4538 1.66 3.25 3.69 4.00 4.00 2.44 3.25 3.25 3.25 17.95 22.40 14.96
(330.0) (325.0) (25.0) (55.0) (42.4) (82.6) (93.8) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (456.0) (569.0) (380.0)
12.99 12.16 3GL 0.98 1.97 8E4196 1.75 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 17.55 23.03 16.06
(330.0) (309.0) (25.0) (50.0) (44.4) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (446.0) (585.0) (408.0)
12.99 12.16 3GR 0.98 1.97 8E4197 1.73 3.25 3.61 4.00 4.00 2.40 3.25 3.25 3.25 17.55 23.03 16.06
(330.0) (309.0) (25.0) (50.0) (44.0) (82.6) (91.8) (101.6) (101.6) (60.0) (82.6) (82.6) (82.5) (446.0) (585.0) (408.0)
12.99 12.99 3FR 0.98 1.12 4T6391 3.25 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 17.40 19.94 12.99
(330.0) (330.0) (25.0) (28.5) (82.5) (82.5) (176.3) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (442.2) (506.7) (330.0)
12.99 12.99 3FL 0.98 1.12 4T6392 3.25 3.25 6.94 4.00 4.00 2.44 3.25 6.50 3.25 17.40 19.94 12.99
(330.0) (330.0) (25.0) (28.5) (82.5) (82.5) (176.3) (101.6) (101.6) (62.0) (82.5) (165.2) (82.5) (442.2) (506.7) (330.0)
12.99 12.48 3HR 0.98 1.57 3G8283 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (40.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HL 0.98 1.57 3G8284 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (40.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HR 0.98 1.38 3G8291 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (35.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.48 3HL 0.98 1.38 3G8292 2.73 3.25 3.70 4.00 4.00 2.44 3.25 3.25 3.25 17.36 22.95 14.48
(330.0) (317.0) (25.0) (35.0) (69.5) (82.6) (94.0) (101.6) (101.6) (62.0) (82.5) (82.6) (82.5) (441.0) (583.0) (368.0)
12.99 12.18 3IR 0.98 1.25 4T8723 2.75 3.25 3.68 4.00 4.00 2.44 3.25 3.25 3.25 17.25 20.81 13.75
(330.0) (309.6) (25.0) (32.0) (70.1) (82.6) (93.7) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (438.2) (528.6) (349.5)
12.99 12.18 3IL 0.98 1.25 4T8724 2.75 3.25 3.68 4.00 4.00 2.44 3.25 3.25 3.25 17.25 20.81 13.75
(330.0) (309.6) (25.0) (32.0) (70.1) (82.6) (93.7) (101.6) (101.6) (62.0) (82.6) (82.6) (82.5) (438.2) (528.6) (349.5)
12.99 12.99 2FR 0.98 1.38 135-9698 3.20 3.25 2.02 4.99 5.99 2.89 5.99 5.99 17.18 21.99 12.99
(330.0) (330.0) (25.0) (35.0) (81.5) (82.6) (51.4) (127.0) (152.4) (73.5) (152.4) (152.4) (436.4) (558.8) (330.0)
12.99 12.99 2FL 0.98 1.38 135-9699 3.20 3.25 2.02 4.99 5.99 2.89 5.99 5.99 17.18 21.99 12.99
(330.0) (330.0) (25.0) (35.0) (81.5) (82.6) (51.4) (127.0) (152.4) (73.5) (152.4) (152.4) (436.4) (558.8) (330.0)
12.99 11.61 3EL 0.98 2.56 7T4090 1.67 3.25 2.99 4.00 4.00 2.99 3.00 3.00 3.00 15.71 20.51 15.16
(330.0) (295.0) (25.0) (65.0) (42.4) (82.6) (76.0) (101.6) (101.6) (76.0) (76.2) (76.2) (76.2) (399.0) (521.0) (385.0)
12.99 11.61 3ER 0.98 2.56 7T4091 1.67 3.25 2.99 4.00 4.00 2.99 3.00 3.00 3.00 15.71 20.51 15.16
(330.0) (295.0) (25.0) (65.0) (42.4) (82.6) (76.0) (101.6) (101.6) (76.0) (76.2) (76.2) (76.2) (399.0) (521.0) (385.0)
12.99 11.61 3EL 0.98 2.56 7T4088 1.67 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.16 19.96 15.16
(330.0) (295.0) (25.0) (65.0) (42.4) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (385.0) (507.0) (385.0)
12.99 11.61 3ER 0.98 2.56 7T4089 1.67 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.16 19.96 15.16
(330.0) (295.0) (25.0) (65.0) (42.4) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (385.0) (507.0) (385.0)
11.00 10.62 3UL 0.875 1.38 105-0574 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (35.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
DIMENSIONS — BULLDOZER END BITS
Bulldozers / Compactors
65
BULLDOZER END BIT DIMENSIONS continued
66
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
11.00 10.62 3UR 0.875 1.38 105-0575 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (35.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.62 3UL 0.875 1.77 105-0576 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (45.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.62 3UR 0.875 1.77 105-0577 1.86 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 11.51
(280.0) (270.0) (22.0) (45.0) (47.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (292.5)
11.00 10.79 3GL 0.875 1.38 9W6198 1.63 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.93 23.62 14.01
(280.0) (274.0) (22.0) (35.0) (41.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (430.0) (600.0) (356.0)
11.00 10.79 3GR 0.875 1.38 9W6199 1.63 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.93 23.62 14.01
(280.0) (274.0) (22.0) (35.0) (41.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (430.0) (600.0) (356.0)
Bulldozers / Compactors
11.00 10.90 3GR 0.98 1.97 9W8653 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.41 21.41 14.54
(280.0) (277.0) (25.0) (50.0) (44.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (417.0) (544.0) (369.5)
11.00 10.90 3GL 0.98 1.97 9W8654 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.41 21.41 14.54
(280.0) (277.0) (25.0) (50.0) (44.4) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (417.0) (544.0) (369.5)
DIMENSIONS — BULLDOZER END BITS
11.00 10.98 3GR 0.98 1.97 9W8651 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 16.02 20.94 14.54
(280.0) (279.0) (25.0) (50.0) (44.4) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (407.0) (532.0) (369.5)
11.00 10.98 3GL 0.98 1.97 9W8652 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 16.02 20.94 14.54
(280.0) (279.0) (25.0) (50.0) (44.4) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (407.0) (532.0) (369.5)
10.00 10.00 3FR 0.875 0.98 4T6505 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (254.0)
10.00 10.00 3FL 0.875 0.98 4T6506 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 17.01 18.58 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (432.0) (472.0) (254.0)
10.00 10.00 3FR 0.875 0.98 4T6241 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.11 16.11 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (409.1) (409.1) (254.0)
10.00 10.00 3FL 0.875 0.98 4T6242 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.11 16.11 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (409.1) (409.1) (254.0)
10.00 10.00 3HR 0.875 1.57 3G8285 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.875 1.57 3G8286 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HR 0.98 1.57 3G8287 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.98 1.57 3G8288 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HR 0.875 0.875 3G8293 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (22.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.875 0.875 3G8294 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (22.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HR 0.875 1.18 3G8315 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.875 1.18 3G8316 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (22.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
BULLDOZER END BIT DIMENSIONS continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3HR 0.98 1.18 3G8317 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3HL 0.98 1.18 3G8318 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.02 20.90 11.53
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (407.0) (531.0) (293.0)
10.00 10.00 3FR 0.875 0.98 4T6503 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.01 18.00 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.6) (457.2) (254.0)
10.00 0.875 3FL 0.98 1.75 4T6504 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 16.01 18.00 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.6) (457.2) (254.0)
10.00 10.00 3FR 0.98 0.98 4T6239 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 15.99 19.17 9.99
(254.0) (254.0) (25.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.4) (487.1) (254.0)
10.00 10.00 3FL 0.98 0.98 4T6240 1.75 3.25 2.95 4.00 4.00 2.95 3.00 3.00 3.00 15.99 19.17 9.99
(254.0) (254.0) (25.0) (25.0) (44.5) (82.6) (75.0) (101.6) (101.6) (75.0) (76.2) (76.2) (76.2) (406.4) (487.1) (254.0)
10.00 10.00 3FR 0.98 1.18 4T8089 1.75 3.25 2.93 4.00 4.00 2.93 3.00 3.00 3.00 15.98 19.17 9.99
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (74.5) (101.6) (101.6) (74.5) (76.2) (76.2) (76.2) (406.0) (487.0) (254.0)
10.00 10.00 3FL 0.98 1.18 4T8090 1.75 3.25 2.93 4.00 4.00 2.93 3.00 3.00 3.00 15.98 19.17 9.99
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (74.5) (101.6) (101.6) (74.5) (76.2) (76.2) (76.2) (406.0) (487.0) (254.0)
10.00 10.00 3FL 0.875 1.38 8E9544 1.77 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.82 19.96 10.00
(254.0) (254.0) (22.0) (35.0) (45.1) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (402.0) (507.0) (254.0)
10.00 10.00 3FR 0.875 1.38 8E9545 1.77 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.82 19.96 10.00
(254.0) (254.0) (22.0) (35.0) (45.1) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (402.0) (507.0) (254.0)
10.00 10.00 3IR 0.98 1.10 9J1477 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.74 18.94 11.55
(254.0) (254.0) (25.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (400.0) (481.1) (293.6)
10.00 10.00 3IL 0.98 1.10 9J1478 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.74 18.94 11.55
(254.0) (254.0) (25.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (400.0) (481.1) (293.6)
10.00 10.00 3IR 0.875 1.10 4J8843 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.72 19.29 11.63
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (399.5) (490.0) (295.5)
10.00 10.00 3IL 0.875 1.10 4J8854 1.75 3.25 2.94 4.00 4.00 2.94 3.00 3.00 3.00 15.72 19.29 11.63
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (74.7) (101.6) (101.6) (74.7) (76.2) (76.2) (76.2) (399.5) (490.0) (295.5)
10.00 10.00 3HR 0.875 1.57 3G8277 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HL 0.875 1.57 3G8278 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HR 0.98 1.57 3G8279 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HL 0.98 1.57 3G8280 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HR 0.98 1.18 3G8301 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3HL 0.98 1.18 3G8302 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.59 19.84 11.41
(254.0) (254.0) (25.0) (30.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (396.0) (504.0) (290.0)
10.00 10.00 3H 0.75 1.00 3J2463 1.75 3.25 1.94 4.00 4.00 1.94 4.00 4.00 1.99 15.38 16.94 11.62
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (50.8) (390.7) (430.3) (295.2)
Bulldozers / Compactors
DIMENSIONS — BULLDOZER END BITS
67
BULLDOZER END BIT DIMENSIONS continued
68
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3H 0.75 1.00 3J2464 1.75 3.25 1.94 4.00 4.00 1.94 4.00 4.00 1.99 15.38 16.94 11.62
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (50.8) (390.7) (430.3) (295.2)
10.00 10.00 3FR 0.75 0.98 4T6671 1.75 3.25 1.95 4.00 4.00 1.95 4.00 4.00 1.99 15.31 16.06 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (101.6) (101.6) (50.8) (388.9) (407.9) (254.0)
10.00 10.00 3FL 0.75 0.98 4T6672 1.75 3.25 1.95 4.00 4.00 1.95 4.00 4.00 1.99 15.31 16.06 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (101.6) (101.6) (50.8) (388.9) (407.9) (254.0)
10.00 10.00 3IR 0.875 1.10 4J8849 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.25 18.44 11.55
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (387.4) (468.4) (293.6)
10.00 10.00 3IL 0.875 1.10 4J8850 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 15.25 18.44 11.55
(254.0) (254.0) (22.0) (28.0) (44.5) (82.5) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (387.4) (468.4) (293.6)
Bulldozers / Compactors
10.00 10.11 3IR 0.98 1.10 9J1479 1.75 3.25 2.43 4.00 4.00 2.43 3.00 3.00 3.00 15.05 18.43 11.55
(254.0) (257.0) (25.0) (28.0) (44.5) (82.5) (61.9) (101.6) (101.6) (61.9) (76.2) (76.2) (76.2) (382.3) (468.3) (293.6)
10.00 10.11 3IL 0.98 1.10 9J1480 1.75 3.25 2.43 4.00 4.00 2.43 3.00 3.00 3.00 15.05 18.43 11.55
(254.0) (257.0) (25.0) (28.0) (44.5) (82.5) (61.9) (101.6) (101.6) (61.9) (76.2) (76.2) (76.2) (382.3) (468.3) (293.6)
DIMENSIONS — BULLDOZER END BITS
10.00 9.31 2GL 0.75 1.18 6Y4410 1.30 2.50 2.24 3.19 3.19 2.24 3.94 3.66 15.04 20.10 12.15
(254.0) (236.5) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (382.0) (510.0) (308.5)
10.00 9.31 2GR 0.75 1.18 6Y4411 1.30 2.50 2.24 3.19 3.19 2.24 3.94 3.66 15.04 20.10 12.15
(254.0) (236.5) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (382.0) (510.0) (308.5)
10.00 10.00 3HR 0.875 1.38 6Y5375 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (35.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HL 0.875 1.38 6Y5376 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (35.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HR 0.875 2.00 6Y5377 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (50.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 10.00 3HL 0.875 2.00 6Y5378 1.55 3.18 1.45 2.37 5.31 1.45 2.37 4.12 2.37 15.00 19.84 11.41
(254.0) (254.0) (22.0) (50.0) (39.5) (81.0) (37.0) (60.3) (135.0) (37.0) (60.3) (104.8) (60.3) (381.0) (504.0) (290.0)
10.00 8.52 2ER 0.75 1.18 9W1875 0.98 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.61 18.31 11.63
(254.0) (216.5) (19.0) (30.0) (25.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (295.5)
10.00 8.52 2EL 0.75 1.18 9W1876 0.98 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.61 18.31 11.63
(254.0) (216.5) (19.0) (30.0) (25.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (295.5)
10.00 10.00 2FR 0.75 0.98 9W8874 2.46 2.50 2.24 3.19 3.19 2.24 3.94 3.66 14.61 18.31 10.00
(254.0) (254.0) (19.0) (25.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (254.0)
10.00 10.00 2FL 0.75 0.98 9W8875 2.46 2.50 2.24 3.19 3.19 2.24 3.94 3.66 14.61 18.31 10.00
(254.0) (254.0) (19.0) (25.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (254.0)
10.00 10.00 2UL 0.75 1.38 122-8617 2.46 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.60 18.30 10.62
(254.0) (254.0) (19.0) (35.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (270.0)
10.00 10.00 2UR 0.75 1.38 122-8618 2.46 2.50 2.24 3.18 3.18 2.24 3.94 3.66 14.60 18.30 10.62
(254.0) (254.0) (19.0) (35.0) (62.6) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (371.0) (465.0) (270.0)
10.00 10.00 3H 0.75 1.00 3J2465 1.75 3.25 1.94 4.00 4.00 1.94 3.00 3.00 3.00 14.50 17.50 11.60
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (76.2) (76.2) (76.2) (368.3) (444.5) (294.6)
10.00 10.00 3H 0.75 1.00 3J2466 1.75 3.25 1.94 4.00 4.00 1.94 3.00 3.00 3.00 14.50 17.50 11.60
(254.0) (254.0) (19.0) (25.4) (44.5) (82.6) (49.3) (101.6) (101.6) (49.3) (76.2) (76.2) (76.2) (368.3) (444.5) (294.6)
BULLDOZER END BIT DIMENSIONS continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
10.00 10.00 3FR 0.75 0.98 4T6667 1.75 3.25 1.95 4.00 4.00 1.95 3.00 3.00 3.00 14.50 16.50 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (76.2) (76.2) (76.2) (368.3) (419.1) (254.0)
10.00 10.00 3FL 0.75 0.98 4T6668 1.75 3.25 1.95 4.00 4.00 1.95 3.00 3.00 3.00 14.50 16.50 10.00
(254.0) (254.0) (19.0) (25.0) (44.5) (82.6) (49.5) (101.6) (101.6) (49.5) (76.2) (76.2) (76.2) (368.3) (419.1) (254.0)
10.00 10.00 3FR 0.875 1.57 7J2975 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.39 15.30 10.00
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (340.0) (388.6) (254.0)
10.00 10.00 3FL 0.875 1.57 7J2976 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.39 15.30 10.00
(254.0) (254.0) (22.0) (40.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (340.0) (388.6) (254.0)
10.00 10.00 3FR 0.875 0.98 4T6669 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.38 15.31 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (339.9) (388.9) (254.0)
10.00 10.00 3FL 0.875 0.98 4T6670 1.75 3.25 2.44 4.00 4.00 2.44 3.00 3.00 3.00 13.38 15.31 10.00
(254.0) (254.0) (22.0) (25.0) (44.5) (82.6) (62.0) (101.6) (101.6) (62.0) (76.2) (76.2) (76.2) (339.9) (388.9) (254.0)
8.00 7.87 1ER 0.75 0.98 4T5407 3.74 3.85 3.00 3.00 3.00 16.93 20.47 9.92
(203.2) (200.0) (19.0) (25.0) (95.0) (98.0) (76.2) (76.2) (76.2) (430.0) (520.0) (252.0)
8.00 7.87 1EL 0.75 0.98 4T5408 3.74 3.85 3.00 3.00 3.00 16.93 20.47 9.92
(203.2) (200.0) (19.0) (25.0) (95.0) (98.0) (76.2) (76.2) (76.2) (430.0) (520.0) (252.0)
8.00 8.00 1F 0.75 0.75 3G4285 4.00 3.87 3.87 3.00 3.00 3.00 16.73 16.73 8.00
(203.2) (203.2) (19.0) (19.0) (101.6) (98.2) (98.2) (76.2) (76.2) (76.2) (425.0) (425.0) (203.2)
8.00 8.00 2GL 0.75 0.98 9W9014 1.38 2.50 2.24 4.00 4.00 2.24 4.00 4.00 14.33 19.25 10.53
(203.2) (203.5) (19.0) (25.0) (35.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (364.0) (489.0) (267.5)
8.00 8.00 2GR 0.75 0.98 9W9015 1.38 2.50 2.24 4.00 4.00 2.24 4.00 4.00 14.33 19.25 10.53
(203.2) (203.5) (19.0) (25.0) (35.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (364.0) (489.0) (267.5)
8.00 8.03 2HR 0.75 0.87 3G8319 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HL 0.75 0.87 3G8320 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HR 0.625 0.87 3G8321 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (16.0) (22.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.03 2HL 0.625 0.87 3G8322 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 13.93 16.97 9.61
(203.2) (204.0) (16.0) (22.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (354.0) (431.0) (244.0)
8.00 8.00 2GL 0.75 0.98 8E9900 1.38 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.89 17.38 10.49
(203.2) (203.5) (19.0) (25.0) (35.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (353.0) (441.5) (266.5)
8.00 8.00 2GR 0.75 0.98 8E9901 1.38 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.89 17.38 10.49
(203.2) (203.5) (19.0) (25.0) (35.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (353.0) (441.5) (266.5)
8.00 8.00 2FR 0.75 1.00 4T4435 1.50 2.50 2.24 3.19 3.19 2.24 3.94 3.66 13.78 15.98 8.00
(203.2) (203.2) (19.0) (25.4) (38.1) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (350.0) (406.0) (203.2)
8.00 8.00 2FL 0.75 1.00 4T4436 1.50 2.50 2.24 3.19 3.19 2.24 3.94 3.66 13.78 15.98 8.00
(203.2) (203.2) (19.0) (25.4) (38.1) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (350.0) (406.0) (203.2)
8.00 8.00 2FL 0.75 0.75 4T3045 1.50 2.50 2.24 4.00 4.00 2.24 4.00 4.00 13.75 14.85 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (349.2) (377.2) (203.2)
8.00 8.00 2FL 0.75 0.75 4T3046 1.50 2.50 2.24 4.00 4.00 2.24 4.00 4.00 13.75 14.85 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (57.0) (101.6) (101.6) (57.0) (101.6) (101.6) (349.2) (377.2) (203.2)
DIMENSIONS — BULLDOZER END BITS
69
Bulldozers / Compactors
BULLDOZER END BIT DIMENSIONS continued
70
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
8.00 8.00 2IR 0.75 0.87 5J1419 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.62 14.72 9.50
(203.2) (203.2) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (345.9) (373.9) (241.3)
8.00 8.00 2IL 0.75 0.87 5J1420 1.50 2.50 2.25 4.00 4.00 2.25 4.00 4.00 13.62 14.72 9.50
(203.2) (203.2) (19.0) (22.0) (38.1) (63.5) (57.2) (101.6) (101.6) (57.2) (101.6) (101.6) (345.9) (373.9) (241.3)
8.00 7.55 2ER 0.75 1.18 4T4454 1.30 2.50 2.24 3.18 3.18 2.24 3.94 3.66 13.58 16.93 10.63
(203.2) (192.0) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (345.0) (430.0) (270.0)
8.00 7.55 2EL 0.75 1.18 4T4455 1.30 2.50 2.24 3.18 3.18 2.24 3.94 3.66 13.58 16.93 10.63
(203.2) (192.0) (19.0) (30.0) (33.0) (63.5) (57.0) (81.0) (81.0) (57.0) (100.0) (93.0) (345.0) (430.0) (270.0)
8.00 7.99 2HR 0.625 0.87 3G8295 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.82 8.70
(203.2) (203.0) (16.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
Bulldozers / Compactors
8.00 7.99 2HL 0.625 0.87 3G8296 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.82 8.70
(203.2) (203.0) (16.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
8.00 7.99 2HR 0.75 0.87 3G8297 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.83 8.70
(203.2) (203.0) (19.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
DIMENSIONS — BULLDOZER END BITS
8.00 7.99 2HL 0.75 0.87 3G8298 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.14 15.83 8.70
(203.2) (203.0) (19.0) (22.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (334.0) (402.0) (221.0)
8.00 8.00 2FR 0.75 0.75 4T3041 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.06 14.89 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (331.7) (378.2) (203.2)
8.00 8.00 2FL 0.75 0.75 4T3042 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.06 14.89 8.00
(203.2) (203.2) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (331.7) (378.2) (203.2)
8.00 8.00 2FR 0.625 0.75 4T3049 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.00 14.50 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (330.2) (368.2) (203.2)
8.00 8.00 2FL 0.625 0.75 4T3050 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 13.00 14.50 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (330.2) (368.2) (203.2)
8.00 8.00 2F 0.625 0.625 5R5007 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.94 13.56 8.00
(203.2) (203.2) (16.0) (16.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (328.7) (344.4) (203.2)
8.00 8.00 2F 0.625 0.625 5R5008 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.94 13.56 8.00
(203.2) (203.2) (16.0) (16.0) (38.1) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (328.7) (344.4) (203.2)
8.00 8.00 2FR 0.625 0.75 4T3051 1.50 2.50 1.93 4.00 4.00 1.93 4.00 4.00 12.92 13.55 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (101.6) (101.6) (49.0) (101.6) (101.6) (328.2) (344.2) (203.2)
8.00 8.00 2FL 0.625 0.75 4T3052 1.50 2.50 1.93 4.00 4.00 1.93 4.00 4.00 12.92 13.55 8.00
(203.2) (203.2) (16.0) (19.0) (38.0) (63.5) (49.0) (101.6) (101.6) (49.0) (101.6) (101.6) (328.2) (344.2) (203.2)
8.00 7.99 2IR 0.625 0.75 9F7073 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.75 13.75 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (324.0) (349.3) (235.0)
8.00 7.99 2IL 0.625 0.75 9F7074 1.50 2.50 1.94 4.00 4.00 1.94 4.00 4.00 12.75 13.75 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (101.6) (101.6) (49.3) (101.6) (101.6) (324.0) (349.3) (235.0)
8.00 7.99 2IR 0.75 0.75 4J8261 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (311.0) (381.0) (235.0)
8.00 7.99 2IL 0.75 0.75 4J8262 1.50 2.50 1.93 3.50 3.50 1.93 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (19.0) (19.0) (38.0) (63.5) (49.0) (88.9) (88.9) (49.0) (101.6) (101.6) (311.0) (381.0) (235.0)
8.00 7.99 2IR 0.625 0.75 9F7075 1.50 2.50 1.94 3.50 3.50 1.94 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (88.9) (88.9) (49.3) (101.6) (101.6) (311.1) (381.0) (235.0)
BULLDOZER END BIT DIMENSIONS continued
Bolt Part
Width W1 Type Size Thick Number A B C D E F G H I J K L1 L2 W2
8.00 7.99 2IL 0.625 0.75 9F7076 1.50 2.50 1.94 3.50 3.50 1.94 4.00 4.00 12.25 15.00 9.25
(203.2) (203.0) (16.0) (19.0) (38.0) (63.5) (49.3) (88.9) (88.9) (49.3) (101.6) (101.6) (311.1) (381.0) (235.0)
8.00 8.00 1FR 0.625 0.75 4T3043 3.97 1.95 2.50 2.50 10.00 11.40 8.00
(203.2) (203.2) (16.0) (19.0) (100.8) (49.5) (63.5) (63.5) (254.0) (289.5) (203.2)
8.00 8.00 1FL 0.625 0.75 4T3044 3.97 1.95 2.50 2.50 10.00 11.40 8.00
(203.2) (203.2) (16.0) (19.0) (100.8) (49.5) (63.5) (63.5) (254.0) (289.5) (203.2)
8.00 8.00 1HR 0.625 0.87 5A4565 4.00 1.93 2.50 2.50 9.05 11.85 8.79
(203.2) (203.2) (16.0) (22.0) (101.6) (49.0) (63.5) (63.5) (230.0) (301.0) (223.5)
8.00 8.00 1HL 0.625 0.87 5A4566 4.00 1.93 2.50 2.50 9.05 11.85 8.79
(203.2) (203.2) (16.0) (22.0) (101.6) (49.0) (63.5) (63.5) (230.0) (301.0) (223.5)
7.99 8.03 1HL 0.75 0.875 140-6788 3.99 3.86 3.00 3.00 3.00 17.32 20.35 9.60
(203.0) (204.0) (19.0) (22.0) (101.5) (98.2) (76.2) (76.2) (76.2) (440.0) (517.0) (244.0)
7.99 8.03 1HR 0.75 0.875 140-6787 3.99 3.86 3.00 3.00 3.00 17.32 20.35 9.60
(203.0) (204.0) (19.0) (22.0) (101.5) (98.2) (76.2) (76.2) (76.2) (440.0) (517.0) (244.0)
6.50 6.50 1F 0.625 0.625 4T6229 3.25 3.99 2.50 2.50 12.99 12.99 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (330.0) (330.0) (165.0)
6.50 6.50 1FL 0.625 0.625 6Y5840 3.25 3.99 2.49 2.49 2.44 12.20 14.05 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (62.0) (310.0) (357.0) (165.0)
6.50 6.50 1FR 0.625 0.625 6Y5839 3.25 3.99 2.49 2.49 2.44 12.20 14.05 6.49
(165.0) (165.0) (16.0) (16.0) (82.5) (101.5) (63.5) (63.5) (62.0) (310.0) (357.0) (165.0)
DIMENSIONS — BULLDOZER END BITS
71
Bulldozers / Compactors
Bulldozers / Compactors
CATERPILLAR LIMITED WARRANTY
72
Bulldozers / Compactors
CATERPILLAR LIMITED WARRANTY
73
Bulldozers / Compactors
NOTES
74
Excavators
75
Excavators
76
Excavators
77
Excavators
Excavation (X)
General purpose wide bucket for excavation. The excavation
bucket has a shorter tip radius than a comparable capacity trench-
ing bucket providing increased curl force. Suitable for the same
types of material as the trenching bucket.
Utility (UT)
Light duty excavation, finishing, or cleanup bucket for a variety of
utility applications. Larger capacity buckets for lighter density mate-
rials. Bolt holes are provided for bolt-on teeth or bolt-on cutting edge.
78
Excavators
79
Excavators
80
Excavators
81
Excavators
R3.6B
“R” = attach stick to a Length of stick “B” indicates
Reach Boom in Meters Bucket Linkage
(Bucket Family)
“M” = attach stick to a
Mass Excavation
Boom
NO. 194219
S/N MACHINE
CAPACITY m3 yd3
WEIGHT kg lb
WIDTH mm in
82
Excavators
BUCKET LINKAGE
83
84
300 SERIES EXCAVATOR - BASIC LINKAGE & GET DATA
Pin Diameters Q/C
Std. Edge Front Rear Pin MX Pin Face Conversion Front Front Rear
Bucket GET Thk (Stick Pin) (Pwr Link) Spread Spread Spread Linkage Linkage Pin Pin Pin Adjuster
Family Size (mm) (mm) (mm) (mm) (mm) (mm) Group Group Length (in) (Stick) (Power) Group
307 J225 22 45 45 306.0 — 186 — 107-9942 14.0 106-6734 106-6734 102-3143
Excavators
Stick to
Pin
Bucket Pin Spre
a d
Power Link
to Bucket Pin (Stick)
(Power Link)
Face
Spread
Excavators
Machine/Bucket Interchangeability
Models listed on the same line will interchange buckets.* (Ranked by machine size)
5230
5130
5080
375 (J linkage)
375 (H linkage)
245 Mass Excavating
245D, 245B, 245
345B, 350 (G linkage)
345B, 350 (F linkage)
235 Mass Excavating
235D, 235C, 235B, 235
330B (E linkage), 330 (E linkage)
330B (D linkage), 231D, 330 (D linkage), 325 & 325B (D linkage)
330 (C linkage), 325 & 325B (C linkage)
E300B, E300, MS300-8, MS280-2
325B (D linkage), 231D, 325 (D linkage), 330 & 330B (D linkage)
325B (C linkage), 330 & 325 (C linkage)
320B, E110B, E120, E120B, 311, 312, MS120-8, (A linkage - long reach, including E200 & E240)
225D, 229D
225B, 225, 229
225B Versalink, 225D Versalink, 229 Versalink, 229D Versalink
322B (S linkage), 322 (S linkage)
M318, E240B, E200B, E200, MS240-8, MS230-3, MS210-8, 322 (B linkage)
320B (C linkage), 320, 325, 325B, 330 (C linkage)
320B (B linkage), M318, E240B, E200B, E200, MS240-8, MS230-3, MS210-8, 320, 322, 325 (B linkage)
215D, 219D
215, 215C, 219, 219C
215 Versalink, 215C Versalink, 215D Versalink, 219 Versalink, 219C Versalink, 219D Versalink
E200B Versalink, E200 Versalink, E180 Versalink
E180
224B, 224
214B, 213B
M318, B linkage, E240B, E200B, E200, MS240-8, MS230-3, MS210-8
315
E140
205, 206, 211, 212, 213, 214
312B, 312, 311B, 311, E110B, E120, E120B, 311, (A linkage), MS120-8, E200 & E240 (with long reach stick)
E110, MS120-2, MS090-8
307, E70B, E70
* Even though a bucket may fit different machines, there are other factors to consider
before interchanging, such as machine performance differences and application differences.
85
Excavators
300 SERIES
86
Excavators
300 SERIES
87
Excavators
300 SERIES
88
Excavators
300 SERIES
89
Excavators
300 SERIES
90
Excavators
300 SERIES
A FAMILY BUCKETS
Bucket Group* 125-0513 112-7064
Bucket Assembly
Width — inches 45" 32"
Width — mm 1143 813
Bucket Type DC - Longreach Longreach, Backhoe
Rated Capacity
Cubic Yard 0.75 0.58
Cubic Meter 0.58 0.44
Base Edge Assembly 102-7620
Base Edge 7Y6601a
Bottom Wear Strip
Front — Flat 102-7636
Rear — Shaped 102-7637
Number of Teeth 5
Center Adapters (5) 119-3253
Long Tip** 1U3252
HD Pin 132-4763
HD Retainer 149-5733
Tip Size J250
Bucket Type: DC — Ditch Cleaning
* Bucket group includes slack adjuster group.
** Additional tip options found in tip option chart on page 148.
a Base edge only — no adapters.
B FAMILY BUCKETS*
Bucket Group** 129-5046 100-6223 129-9627 100-4187 134-1883 129-5045
Bucket Assembly 129-4867 100-6224 100-4188 134-1893 129-4866
Width — inches 24" 24" 27" 30" 30" 30"
Width — mm 610 630 686 775 762 762
Bucket Type HD ET R ET HDR HD
Rated Capacity
Cubic Yard 0.62 0.62 0.63 0.75 0.75 0.75
Cubic Meter 0.48 0.40 0.48 0.60 0.58 0.58
Base Edge Assembly 104-2096 104-2096 188-424a 100-5360 104-2097 104-2097
100-6480 104-2097
Bottom Wear Strip (2) 4I4199
Front — Flat 127-8624 (3) 100-6478 (3) 100-5356 134-1909 127-8626
Rear — Shaped (3) 128-0700 (2) 100-6479 (2) 100-5357 (4) 134-1910 (3) 127-6942
(3) 134-1911
Number of Teeth 3 3 3 3 4 4
Center Adapters 6I6354 6I6354 6I6354 6I6354 (2) 6I6354 (2) 6I6354
Corner Adapters (R/L) 6I6355/6 6I6355/6 6I6355/6 6I6355/6 6I6355/6 6I6355/6
Long Tip*** 1U3352 1U3352 1U3352 1U3352 1U3352 1U3352
HD Pin 114-0358 114-0358 114-0358 114-0358 114-0358 114-0358
HD Retainer 114-0359 114-0359 114-0359 114-0359 114-0359 114-0359
Tip Size J350 J350 J350 J350 J350 J350
Bucket Type: HD — Heavy Duty ET — Extreme Trenching R — Rock HDR — Heavy Duty Rock
* B Family Buckets require “B” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
a Balderson Part # 1-800-255-2372.
91
Excavators
300 SERIES
92
Excavators
300 SERIES
93
Excavators
300 SERIES
94
Excavators
300 SERIES
95
Excavators
300 SERIES
S FAMILY BUCKETS*
Bucket Group** 132-5065 129-5702 129-9623 108-5179 129-9624 132-5066
Bucket Assembly*** 129-5703 108-5180
Width — inches 24" 24" 28" 30" 30" 30"
Width — mm 610 610 711 775 762 762
Bucket Type GP HD R HD R GP
Rated Capacity
Cubic Yard 0.75 0.62 0.75 0.92 0.88 1.13
Cubic Meter 0.58 0.48 0.58 0.70 0.68 0.87
Base Edge Assembly 104-2096 104-2096 190-725a 105-2761 190-597a 105-2761
Bottom Wear Strip
Front — Flat 133-2298 127-8624 127-5710 133-2243
Rear — Shaped (3) 100-6479 (3) 128-0700 (4) 127-5711 (4) 100-4346
Number of Teeth 3 3 3 3 3 3
Center Adapters 6I6354 6I6354 6I6404 6I6404 6I6404 6I6404
Corner Adapters (R/L) 6I6355/6 6I6355/6 6I6405/6 6I6405/6 6I6405/6 6I6405/6
Long Tip# 1U3352 1U3352 7T3402 7T3402 7T3402 7T3402
HD Pin 114-0358 114-0358 116-7408 116-7408 116-7408 116-7408
HD Retainer 114-0359 114-0359 116-7409 116-7409 116-7409 116-7409
Tip Size J350 J350 J400 J400 J400 J400
Bucket Type: GP — General Purpose HD — Heavy Duty R — Rock
* S Family Buckets require “S” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 148.
a Balderson Part # 1-800-255-2372.
96
Excavators
300 SERIES
97
Excavators
300 SERIES
98
Excavators
300 SERIES
C FAMILY BUCKETS*
Bucket Group** 129-9621 100-4189 100-4189 132-5051 120-7007 6I5015
Bucket Assembly 113-1856 100-4190 7Y7689
Width — inches 28" 30" 30" 30" 30" 31"
Width — mm 711 775 775 762 762 800
Bucket Type R HD HD GP R T
Rated Capacity
Cubic Yard 0.75 0.92 0.92 1.13 0.88 0.92
Cubic Meter 0.58 0.70 0.70 0.87 0.68 0.70
Base Edge Assembly 190-725a 100-4344 105-2761 105-2761 190-597a 7Y7695
6I5208
Bottom Wear Strip
Front — Flat (3) 100-4347 (4) 127-5711 133-2243 (3) 7Y7693
Rear — Shaped (2) 100-4346 (2) 127-5710 (3) 100-4346 (2) 7Y7694 (2) 7Y7527
Number of Teeth 3 3 3 3 3 4
Center Adapters 6I6404 6I6404 6I6404 6I6404 6I6404 (2) 6I6354
Corner Adapters (R/L) 6I6405/6 6I6405/6 6I6405/6 6I6405/6 6I6405/6 6I6355/6
Long Tip*** 7T3402 7T3402 7T3402 7T3402 7T3402 1U3350
HD Pin 116-7408 116-7408 116-7408 116-7408 116-7408 114-0358
HD Retainer 116-7409 116-7409 116-7409 116-7409 116-7409 114-0359
Tip Size J400 J400 J400 J400 J400 J350
Bucket Type: R — Rock HD — Heavy Duty GP — General Purpose T — Trenching
* C Family Buckets require “C” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
a Balderson Part # 1-800-255-2372.
99
Excavators
300 SERIES
100
Excavators
300 SERIES
101
Excavators
300 SERIES
102
Excavators
300 SERIES
103
Excavators
300 SERIES
D FAMILY BUCKETS*
Bucket Group** 100-4191 129-9619 132-5043 128-3141 6I5028 7I4197
Bucket Assembly 100-4192 128-2933 7Y9113 7I3432
Width — inches 30" 30" 30" 30" 35" 36"
Width — mm 775 762 762 762 900 915
Bucket Type ET R GP HD RR ET
Rated Capacity
Cubic Yard 0.92 1.13 1.13 1.00 0.92 1.25
Cubic Meter 0.70 0.87 0.87 0.77 0.70 0.90
Base Edge Assembly 105-2532 191-628a 105-2532 105-2532 6I5663b 105-2533
Bottom Wear Strip
Front — Flat (3) 100-4356 118-8713 128-2942 (3) 100-4364
Rear — Shaped (2) 100-4355 (4) 118-8714 (3) 128-2945 (3) 7Y9121 (2) 100-4363
Number of Teeth 3 3 3 3 5 3
Center Adapters 159-0464 159-0464 159-0464 159-0464 107-3464 159-0464
Intermediate Adapters (2) 107-3465
Corner Adapters (R/L) 159-0465/6 159-0465/6 159-0465/6 159-0465/6 (2) 107-3566 159-0465/6
Long Tip*** 9W8452 9W8452 9W8452 9W8452 9W8452 9W8452
HD Pin 114-0468 114-0468 114-0468 114-0468 114-0468 114-0468
HD Retainer 107-3469 107-3469 107-3469 107-3469 107-3469 107-3469
Tip Size J460 J460 J460 J460 J460 J460
Bucket Type: ET — Extreme Service Trenching R — Rock GP — General Purpose HD — Heavy Duty RR — Rock Ripping
* D Family Buckets require “D” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
a Balderson Part # 1-800-255-2372.
b The base edge assembly includes 107-3464 and (2) 107-3465. (2) 107-3466 must be ordered separately if replacing base edge assembly.
104
Excavators
300 SERIES
105
Excavators
300 SERIES
106
Excavators
300 SERIES
107
Excavators
300 SERIES
E FAMILY BUCKETS*
Bucket Group** 6I5037 6I5035 124-3036 6I5038 6I5036 124-3037
Bucket Assembly 7Y9147 7Y9141 4I4100 7Y9148 7Y9143 7Y9150
Width — inches 59" 63" 63" 64" 68" 68"
Width — mm 1504 1600 1600 1634 1735 1735
Bucket Type EX X X EMX MX X
Rated Capacity
Cubic Yard 2.25 2.50 2.62 2.50 2.75 2.88
Cubic Meter 1.70 1.90 2.00 1.90 2.10 2.22
Base Edge Assembly 6I5246 6I5240 109-8486 6I5247 6I5241 109-8487
Bottom Wear Strip
Front — Flat 128-9213 128-9211 (3) 4I4112 (2) 4I7136 (2) 4I4067 (3) 101-2242
Rear — Shaped 4I7128 (2) 4I4129 (3) 4I4113 (2) 4I7135 (2) 4I4068 (2) 101-2243
Number of Teeth 4 5 6 4 6 6
Center Adapters (2) 6I6554 (3) 159-0464 (4) 159-0464 (2) 6I6554 (4) 159-0464 (4) 159-0464
Corner Adapters (R/L) 6I6555/6 159-0465/6 159-0465/6 6I6555/6 159-0465/6 159-0465/6
Long Tip*** 9W8552 9W8452 9W8452 9W8552 9W8452 9W8452
HD Pin 107-3378 114-0468 114-0468 107-3378 114-0468 114-0468
HD Retainer 107-8559 107-3469 107-3469 107-8559 107-3469 107-3469
Tip Size J550 J460 J460 J550 J460 J460
Bucket Type: EX — Extreme Service Excavating X — Excavating EMX — Extreme Service Mass Excavation MX — Mass Excavation
* E Family Buckets require “E” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
108
Excavators
300 SERIES
F FAMILY BUCKETS*
Bucket Group** 145-8066 105-3596 136-6240 106-8854 145-8067 105-3613
Bucket Assembly*** 145-8072 105-3597 136-6247 109-1127 145-8073 105-3614
Width — inches 36" 36" 36" 38" 42" 42"
Width — mm 914 925 914 953 1219 1219
Bucket Type GP ET HD RR GP ET
Rated Capacity
Cubic Yard 1.75 1.44 1.38 1.25 2.12 1.83
Cubic Meter 1.34 1.10 1.06 0.90 1.62 1.40
Base Edge Assembly 137-4105 105-3611 137-4105 105-9716a 137-4106 105-3622
Bottom Wear Strip
Front — Flat 145-8085 (2) 105-3609 136-6269 145-8088 (2) 105-3620
Rear — Shaped (4) 145-8086 (3) 105-3610 (4) 128-2949 (3) 105-3610 (4) 145-8089 (3) 105-3621
Number of Teeth 3 3 3 5 4 3
Center Adapters 159-0464 6I6554 159-0464 107-8554 (2) 159-0464 6I6554
Intermediate Adapters (2) 107-8555
Corner Adapters (R/L) 159-0465/6 6I6555/6 159-0465/6 (2) 107-8556 159-0465/6 6I6555/6
Long Tip# 9W8452 9W8552 9W8452 9W8552 9W8452 9W8552
HD Pin 114-0468 107-3378 114-0468 107-3378 114-0468 107-3378
HD Retainer 107-3469 107-8559 107-3469 107-8559 107-3469 107-8559
Tip Size J460 J550 J460 J550 J460 J550
Bucket Type: GP — General Purpose ET — Extreme Service Trenching HD — Heavy Duty RR — Rock Ripping
* F Family Buckets require “F” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 148.
a The Base Edge Assembly includes 107-8554 and (2) 107-8555. (2) 107-8556 must be ordered separately if replacing Base Edge Assembly.
109
Excavators
300 SERIES
110
Excavators
300 SERIES
G FAMILY BUCKETS*
Bucket Group** 143-5412 138-4687 6I5071 6I5050 6I5050 138-4714
Bucket Assembly*** 143-5413 138-4715 105-6215 4I4071 113-2112 138-4716
Width — inches 75" 75" 74" 75" 75" 67"
Width — mm 1905 1900 1880 1895 1895 1710
Bucket Type HDR HD VX MX MX HD
Rated Capacity
Cubic Yard 4.00 4.00 3.14 3.50 3.50 3.50
Cubic Meter 3.10 3.00 2.40 2.60 2.60 2.60
Base Edge Assembly 138-2395 138-2395 109-8492 4I4092 109-8490 138-4728
Bottom Wear Strip
Front — Flat 143-5421 138-2392 (2) 105-6219 (3) 4I4090 (3) 4I4090 138-4726
Rear — Shaped (5) 143-5422 (4) 138-2393 (2) 105-6218 (3) 4I4091 (3) 4I4091 (4) 138-4727
(3) 143-5423
Number of Teeth 6 6 6 5 5 6
Center Adapters (4) 6I6554 (4) 6I6554 (3) 105-6269 (3) 6I6554 (3) 6I6554 (4) 6I6554
Corner Adapters (R/L) 6I6465/6 6I6555/6 (3) 105-6270 6I6555/6 6I6555/6 6I6555/6
Long Tip# 9W8552 9W8552 9W8552 9W8552 9W8552 9W8552
HD Pin 107-3378 107-3378 107-3378 107-3378 107-3378 107-3378
HD Retainer 107-8559 107-8559 107-8559 107-8559 107-8559 107-8559
Tip Size J550 J550 J550 J550 J550 J550
Bucket Type: HDR — Heavy Duty Rock HD — Heavy Duty VX — V Type Excavation MX — Mass Excavation
* G Family Buckets require “G” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Bucket assembly part numbers are found in the Parts Sales Kit (PSK) and can be used to locate information within this publication.
Parts Sales should use this part number to order buckets.
# Additional tip options found in tip option chart on page 148.
111
Excavators
300 SERIES
H FAMILY BUCKETS*
Bucket Group** 100-6194 104-2111 137-6257 100-6192 100-5642 100-5712
Bucket Assembly 100-6195 100-8177 137-6257 100-6193 100-5643 100-5713
Width — inches 42" 43" 47" 48" 54" 60"
Width — mm 1075 1114 1194 1225 1380 1560
Bucket Type ET RR RR ET T T
Rated Capacity
Cubic Yard 2.10 1.96 2.00 2.61 3.01 3.53
Cubic Meter 1.60 1.50 1.54 2.00 2.30 2.70
Base Edge Assembly 100-6197 105-2501a 142-4315 a 100-6196 107-9890 100-5714
Bottom Wear Strip
Front — Flat (3) 105-2439 (3) 100-6201 (3) 7Y7857 (3) 100-5717
Rear — Shaped 110-1572 (3) 145-2561 (3) 145-2561 (3) 100-6202 (3) 7Y7858 (3) 100-5718
Number of Teeth 3 5 5 3 4 4
Center Adapters 6I6604 107-8604 107-8604 6I6604 (2) 6I6554 (2) 6I6554
Intermediate Adapters (2) 107-8605 (2) 107-8605
Corner Adapters (R/L) 6I6605/6 (2) 107-8606 (2) 107-8606 6I6605/6 6I6555/6 6I6555/6
Long Tip*** 6I6602 6I6602 6I6602 6I6602 9W8552 9W8552
HD Pin 113-9608 113-9608 113-9608 113-9608 107-3378 107-3378
HD Retainer 113-9609 113-9609 113-9609 113-9609 107-8559 107-8559
Tip Size J600 J600 J600 J600 J550 J550
Bucket Type: ET — Extreme Service Trenching RR — Rock Ripping T — Trenching
* H Family Buckets require “H” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
a The Base Edge Assembly includes 107-8604 and (2) 107-8605. (2) 107-8606 must be ordered separately if replacing Base Edge Assembly.
112
Excavators
300 SERIES
J FAMILY BUCKETS*
Bucket Group** 100-7839 100-7842 135-3706 143-9132 104-1988 104-1990
Bucket Assembly 100-7840 100-7843 135-3707 143-9127 104-6840 104-6845
Width — inches 60" 66" 69" 69" 80" 81"
Width — mm 1535 1680 1753 1753 2040 2080
Bucket Type T T MX Reach MX Reach X VX
Rated Capacity
Cubic Yard 3.75 4.25 4.00 4.00 4.75 4.75
Cubic Meter 2.80 3.20 3.00 3.00 3.50 3.50
Base Edge Assembly 101-9908 101-9919 135-3715 135-3715 107-9839 7I6783
Bottom Wear Strip
Front — Flat (3) 101-9906 (3) 101-9917 135-3713 135-3713 (3) 5I8941 7I6802
Rear — Shaped (3) 101-9907 (3) 101-9918 (3) 135-3714 (3) 135-3714 (3) 5I8942 (3) 7I6801
Number of Teeth 4 4 5 5 5 6
Center Adapters (2) 6I6604 (2) 6I6604 (3) 113-9604 (3) 113-9604 (3) 6I6604
Corner Adapters (R/L) 6I6605/6 6I6605/6 113-9605/6 113-9605/6 6I6605 (3) 6I8605/6
Long Tip*** 6I6602 6I6602 6I6602 6I6602 6I6602 6I6602
HD Pin 113-9608 113-9608 113-9608 113-9608 113-9608 113-9608
HD Retainer 113-9609 113-9609 113-9609 113-9609 113-9609 113-9609
Tip Size J600 J600 J600 J600 J600 J600
Bucket Type: T — Trenching MX — Mass Excavation X — Excavating VX — V Type Excavation
* J Family Buckets require “J” Family Bucket linkage.
** Bucket group includes slack adjuster group.
*** Additional tip options found in tip option chart on page 148.
113
Excavators
300 SERIES
114
Excavators
300 SERIES
V FAMILY BUCKETS
Bucket Group 175-4480 175-4482 175-4484 175-4486 175-4554 175-4488
Bucket Assembly 175-4479 175-4481 175-4483 175-4485 175-4553 175-4487
Width — inches 36" 36" 36" 48" 48" 48"
Width — mm 922 922 922 1230 1230 1230
Bucket Type GP HD HDR GP HD HDR
Rated Capacity
Cubic Yard 2.0 1.63 1.63 2.7 2.42 2.4
Cubic Meter 1.5 1.24 1.24 2.0 1.85 1.83
Base Edge Assembly 175-4514 175-4514 175-4514 183-4098 183-4098 183-4098
Bottom Wear Strip
Front — Flat 175-4515 175-4515 175-4515 169-2845 169-2845 169-2845
Rear — Shaped (6) 175-4518 (7) 175-4519 (6) 175-4520 (6) 175-4526 (7) 169-2844 (6) 175-4527
(2) 175-4521 (2) 175-4528
Number of Teeth 3 3 3 4 4 4
Center Adapters 6I6554 6I6554 6I6554 (2) 6I6554 (2) 6I6554 (2) 6I6554
Corner Adapters (R/L) 6I6555/6 6I6555/6 6I6555/6 6I6555/6 6I6555/6 6I6555/6
Long Tip* 9W8552 9W8552 9W8552 9W8552 9W8552 9W8552
HD Pin 107-3378 107-3378 107-3378 107-3378 107-3378 107-3378
HD Retainer 107-8559 107-8559 107-8559 107-8559 107-8559 107-8559
Tip Size J550 J550 J550 J550 J550 J550
Bucket Type: GP — General Purpose HD — Heavy Duty HDR — Heavy Duty Rock
* Additional tip options found in tip option chart on page 148.
115
Excavators
300 SERIES
W FAMILY BUCKETS
Bucket Assembly 173-5720 173-5724 173-5727
Width — inches 89" 79" 79"
Width — mm 2250 2000 2000
Bucket Type Excavation Extreme Excavation Spade Rock
Rated Capacity
Cubic Yard 6.0 5.2 5.2
Cubic Meter 4.58 3.97 3.97
Base Edge Assembly 174-5099 174-8631 174-8636
Bottom Transverse Wear Strip (7) 174-5102 (7) 174-8641 (7) 174-8644
Bottom Longitudinal Wear Strip (2) 174-8638 (2) 160-9089 (2) 167-9082
Number of Teeth 5 4 4
Center Adapters (3) 6I6604 (2) 6I6604
Corner Adapters (R/L) 6I6605/6 6I6605/6 (2) 6I8605/6
Long Tip* 6I6602 6I6602 6I6602
HD Pin 113-9608 113-9608 113-9608
HD Retainer 113-9609 113-9609 113-9609
Tip Size J600 J600 J600
* Additional tip options found in tip option chart on page 148.
116
Excavators
300 SERIES
117
Excavators
245
TRENCHING/EXCAVATING/ROCK BUCKETS
Standard Bucket and 8K1556 a 8K1557 a 8R0320 b 8K1558 a 8R0769 b 5V5075
Bearing Assembly 3V9729 a 3V9730 a 8R1949 b 3V9106 a
4V8999 a 4V9000 a 4V9001 a
Width* — inches 36" 42" 42" 48" 48" 51"
Width *— mm 910 1070 1080 1220 1230 1300
Bucket Type T T T T X R
Base Edge Assembly 8R0343 8R0783 5V5081
Base Edge 8R0982 8R0982 8R0982
Corners (R/L) 8K4407/9 8K4407/9 8K4407/9 8K4407/9 8K4407/9 7V5700–R
5V5090–L
Center Adapters 6I6554 6I6554 (2) 6I6554 6I6554 (2) 6I6554 (4) 3G9494
Corner Adapters (R/L) 6I6555/6 6I6555/6 6I6555/6 6I6555/6 6I6555/6
Long Tip** (3) 9W8552 (4) 9W8552 (4) 9W8552 (4) 9W8552 (4) 9W8552 (4) 9W8552
HD Pin 107-3378 107-3378 107-3378 107-3378 107-3378 107-3378
HD Retainer Assembly 107-8559 107-8559 107-8559 107-8559 107-8559 107-8559
Tip Size J550 J550 J550 J550 J550 J550
Bucket Type: T — Trenching X — Excavating
* Bucket width is measured across outside corners of new long tips.
** See tip options chart on page 148 for other tip part numbers.
a See Sidecutter chart on page 120 for use on buckets with vertical wear strips column.
b See Sidecutter chart on page 120 for use on buckets with horizontal wear strips column.
118
Excavators
245
119
Excavators
245
120
Excavators
235
121
Excavators
235
122
Excavators
235
123
Excavators
235
124
Excavators
E300
125
Excavators
231
126
Excavators
225, 229
Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.
127
Excavators
225, 229
128
Excavators
225, 229
CLAMSHELL BUCKETS
Assembly Group 8K1467 8K1468 8K1469 8K1470
Width* — inches 24" 30" 36" 42"
Width *— mm 610 760 915 1070
Shell Assembly A 1V7156 1V7174 1V7135 1V7178
Edge Assembly A 8K4163 8K4164 8K4165 8K4166
Adapters A (2) 8J7123 (3) 8J7123 (3) 8J7123 (4) 8J7123
Shell Assembly B 1V7163 1V7167 1V7114 1V7185
Edge Assembly B 8K4246 8K4247 8K4248 8K4249
Adapters B (3) 8J7123 (4) 8J7123 (4) 8J7123 (5) 8J7123
Long Tip** (5) 1U3252 (7) 1U3252 (7) 1U3252 (9) 1U3252
HD Pin 132-4762 132-4762 132-4762 132-4762
HD Retainer Assembly 149-5733 149-5733 149-5733 149-5733
Tip Size J250 J250 J250 J250
* Includes edge and adapters.
** See tip options chart on page 148 for other part numbers.
129
Excavators
E240
Buckets shown below can also be used on MS230-1, MS230-2, MS230-3, and MS240-8 machines.
130
Excavators
224, J450/J460 UPDATE
J450/J460 UPDATE
Though similar in appearance, there is a major difference between the J450 and new
J460 families. The J460 size is not an increase in width from 4.50" to 4.60". The new
J460 parts provide improved retention capabilities by increasing the pin size from
19.05 mm to 23.81 mm in diameter and the adapter pin bore from 21 mm to 25 mm.
The retainer also increased in size. The tips for both the J450 and J460 adapters,
however, are the same. Customers and dealers should be aware that either the J450 or
J460 adapters could be on 988/235 buckets and any other buckets with upsized
J450/J460 adapters. Current production buckets are using J460 adapters exclusively.
The attached list identifies the J450 adapter part numbers along with the J460.
J460 J450
Adapter Number Number
131
Excavators
224
132
Excavators
224
133
Excavators
E200, EL200
134
Excavators
E200, EL200
SPECIALTY BUCKETS
Standard
Bucket
Bucket and
Width* Bucket Bearing Tip** Retainer HD Retainer
inch mm Type Assembly Adapters Long Pin Assembly HD Pin Assembly
79 2000 BF (2) 993-728
75 1900 DC (2) 994-275
34 860 CS (2) 993-763 (6) 9J4384 (6) 1U3202 (6) 8E6208 (6) 8E6209
48 1230 CS (2) 993-784 (6) 9J4384 (6) 1U3202 (6) 8E6208 (6) 8E6209
EJ (2) 993-731 (2) 9W1304 (2) 1U3302 (2) 132-4766 (2) 149-5733
81 2050 TZ (2) 993-729 (2) 9W1304 (2) 1U3302 (2) 132-4766 (2) 149-5733
32 824 X (LR) (2) 993-737 (4) 6Y3254 (4) 1U3252 (4) 132-4762 (4) 149-5733
45 1142 DC (LR) (2) 993-745a
Bucket Type: BF — Bank Forming EJ — Ejector X (LR) — Excavating for 51' long reach, front only. Does not accept sidecutters.
DC — Ditch Cleaning TZ — Trapezoid DC (LR) — Ditch cleaning for 51' long reach, front only. Does not accept sidecutters.
CS — Clamshell
* Measured across outside corners of new long tips.
** See tip options chart on page 148 for other tip part numbers.
a For 51' long reach, front only. Does not accept sidecutters.
135
Excavators
215, 219
136
Excavators
215, 219
CLAMSHELL BUCKETS
Bucket
Width Bucket Shell Base Qty. of
inch mm Group Assembly Edge* Teeth
24 610 5C3300 5C3396 5C4002 2
5C3397 5C3318 3
30 760 5C3199 5C3398 5C0887 3
5C3399 5C4071 4
36 910 5C3301 5C3500 5C0859 3
5C3501 5C0858 4
42 1070 5C3302 5C3502 5C3319 4
5C3503 5C3320 5
* Does not include teeth — must be ordered separately.
137
Excavators
215, 219
TOOTH OPTIONS
Bucket Type T, X EX, Rock Clamshell
Adapters
Center 9W1304 3G8354 9J4384*
Right End 3G6305 3G8355
Left End 3G6306 3G8356
Tip Options
Long 1U3302 1U3352 1U3202
Short 1U3301 1U3351 1U3201
Wide 107-3300 107-3350 109-9200
Abrasion 4T2203
Penetration 9J4309 9J4359 1U3209
Penetration Long Life 125-8309 119-9359
Sharp
Corner 9W8308 9W2358 9W8208
Center 9W8309 9W2359 9W8209
Twin 135-9308 135-9357 135-8208
Heavy Duty Long 9N4302 9N4352
Heavy Duty Long Life 125-8302 135-9352
Heavy Duty Abrasion 9N4303 9N4353
Pin 8E6358 8E6208
Retainer Assembly 8E6359 8E6209
Heavy Duty Pin 132-4766 114-0358
Heavy Duty Retainer Assembly 149-5733 114-0359
Bucket Type: T — Trenching X — Excavating EX — Extreme Service Excavating
* Bolt-on. Use one 4F4042 bolt, one 8J2928 bolt and two 8J2933 nuts.
138
Excavators
E180
Buckets shown below can also be used on MS180, MS180-3, and MS180-8 machines.
139
Excavators
E180
140
Excavators
205, 206, 211, 212, 213, 214
141
Excavators
205, 206, 211, 212, 213, 214
142
Excavators
205, 206, 211, 212, 213, 214
143
Excavators
205, 206, 211, 212, 213, 214
144
Excavators
E70B, E110, E110B, E120, E120B, 311, 312
145
Excavators
Long Tip
• best choice for most jobs
• good strength
• good penetration For more wear strength, if
For more penetration:
• good wear material breakage is a problem:
Penetration Tip
Short Tip
• better penetration • more strength
• less wear material • less wear material
• self sharpening
146
Excavators
Sharp
Sharp:
• Use when penetration is the primary concern.
• Provides less wear material.
Long Sharp
Long Sharp:
• Use when penetration is the primary concern.
• Provides more wear material than standard sharp.
• Not for extreme impact.
Twin Sharp
Twin Sharp:
• Use for enhanced fracture capability.
• Less penetration than sharp tip.
• More wear material than sharp tip.
Penetration Long Life
Penetration Long Life:
;;;
;;;
• A.R.M. increases wear life in moderate- to high-impact
Wide
Wide:
• Provides clean floor.
• Increases capacity with less spillage.
147
Excavators
The majority of the time, the second to last and the third to
last locations in the part number identify the “J” size.
Example: 9W8551
J550
148
Excavators
PRODUCT DESCRIPTION
Adapters
The following two types of adapters are used on Cat base edges. Note that most base edges have the
adapters welded in place when they are made at the factory (called edge assemblies). In many cases,
the edge assembly is complete with all adapters. Where indicated, only the center adapters are
welded on and the corner adapters must be ordered separately.
Bolt-On Adapters
Available on Caterpillar 215 Clam shell bucket cutting edges in
a two-bolt single-strap design.
149
Excavators
150
Excavators
Features Benefits
✔ Replaceable wear surface. ✔ Lower bucket mainenance costs.
✔ Sharpened sidecutters. ✔ Provide better bucket penetration.
✔ Increase bucket width and heaped capacity. ✔ Bigger payloads.
Blade Type
Two styles of Blade Type Sidecutters are effective in average digging
conditions. Suitable for most soil conditions and provides a strong
wear-resistant cutting edge that helps protect the bucket sides.
Combination
For light to moderate digging conditions. The combination sidecutter
reduces cost by allowing for replacement of the worn extension blade
rather than replacing the more expensive base blade.
Tooth-Type
For tough digging conditions. It consists of replaceable tips pinned to side
mounted adapters. The adapter accepts all tips available for excavator
buckets.
Strike-Off
Protects bucket corners from wear. It affords better penetration and offers
an additional cutting edge surface due to the sharp half-arrow design. The
strike-off design provides protection for the sidecutter/bucket mating
surface allowing a used bucket to be fitted with any of the previously
discussed sidecutters.
Heavy Duty
For tough digging conditions. It has more wear mate-
rial and covers more of the sidebar for enhanced
sidebar and bucket side protection.
Sidebar Protector
For extreme digging conditions in high impact appli-
cations. Pin-on for easy replacement; reversible for
longer life. Two styles available: one- & two-piece
design. Dependent on bucket type.
151
Excavators
300 SERIES
FORMER BUCKET SIDECUTTER CHART
One Piece Strike–Off Blade Combination Tooth
311/312 (127 XXXX Buckets)
RH 7Y0204
LH 7Y0203
Bolt (8) 093-7676
Nut (8) 096-7074
B Family Buckets
RH 096-4748
LH 096-4747
Bolt (8) 8T0380
Nut (8) 7X0851
C and D Family Buckets
RH 7Y0357 9J9539 8J9615 8J9615 8J4951*
LH 7Y0358 9J9540 8J9614 8J9614 8J4952*
Blade (2) 4T2886
Bolt (6) 6I6371 (4) 6I6371 (6) 7Y2146 (6) 7Y2146 (6) 7Y2146
(8) 1J6762
Nut (6) 2J3507 (4) 2J3507 (6) 2J3507 (6) 2J3507 (6) 2J3507
(8) 2J3506
Tip (2) 1U3352**
Pin 114-0358***
Retainer Assembly 114-0359***
E, F, G Family Buckets
RH (2) 8J5188 8J9825 8J9825 8J4947
LH 8J9826 8J9826 8J4948
Blade (2) 4T6664
Bolt (4) 7Y2146 (10) 7Y1136 (10) 7Y1136 (10) 7Y1136
(8) 4J9208
Nut (4) 2J3507 (10) 2J3507 (18) 2J3507 (10) 2J3506
Washer (4) 3K5234 (10) 3K5234 (10) 3K5234 (10) 3K5234
Tip (2) 9W8552
Pin 107-3378
Retainer Assembly 107-8559
H and J Family Buckets
RH (2) 8J5188 8J9825 8J9825 8J4947
LH 8J9826 8J9826 8J9848
Blade (2) 4T6664
Bolt (4) 7Y1136 (10) 6I8600 (10) 6I8600 (10) 6I8600
(8) 4J9208
Nut (4) 2J3507 (10) 2J3507 (18) 2J3507 (10) 2J3507
Washer (4) 3K5234 (10) 3K5234 (10) 3K5234 (10) 3K5234
Tip (2) 9W8552
Pin 107-3378
Retainer Assembly 107-8554
* For D Family use 8E1468/69.
** For D Family use (2) 9W8452.
*** For D Family use 114-0468 HD Pin and 107-3469 HD Retainer.
152
Excavators
300 SERIES
112-2485/6 (10) 1D4637 (10) 2J3507 (10) 3K5234 F bucket groups and corresponding
assemblies:
134-5515 and higher
G bucket groups and corresponding
assemblies:
138-4687 and higher
153
Excavators
300 SERIES
154
Excavators
PRODUCT DESCRIPTION
Front Shovel
Use these base edge assemblies on front shovel buckets of larger
model machines. The spade design gives better penetration and
more wear material up front for extended service life.
trailing Backhoe
These base edges are serviced as an assembly (cutting edge
& adapters) for the larger model excavators and for other
excavators they are serviced as a base edge with no adapters
welded in place.
leading Most of these edges are shorter at the rear of the edge than at
the leading edge. When making bucket width measure-
ments, remember to measure both the trailing edge and
leading edge length.
Rock Bucket
These edges are serviced only as an assembly and have a
shorter length at the rear of the cutting edge than at the
leading edge. The major difference between rock and
backhoe base edges are that the rock edges are thicker.
Mass Excavation
These edges are designed similar to the backhoe and rock
edges. They are the longest edge assemblies that Caterpillar
offers.
Clamshell
Use these edges on clamshell buckets. They come as edge
assemblies (base edge and adapters) and base edges. These
edges are designed as a rectangle with the trailing and leading
edge being the same length. Also, some of the clamshell cut-
ting edges have bolt holes for bolt-on adapters. These are used
on smaller model machines.
155
Excavators
EXCAVATOR BUCKET CONVERSION PROCEDURE
Outline
A) Select Appropriate GET System. (See “Excavator Bucket Conversion Options” chart, below).
B) Determine Bucket Width and Cutting Edge Thickness. (See “How to Take Measurements” and
“Recommended Base Edge Thickness by Excavator Weight”).
C) Select Base Edge, Attachments and installation procedures.
— Front Shovel Buckets —
— Backhoe Buckets —
— Rock Buckets —
— Mass Excavation Buckets —
— Clamshell Buckets —
D) Complete Ground Engaging Tools Conversion Report Form (PEEP4210).
Two-Strap Adapters
Weld-On
Tips
CLAMSHELL Clamshell
Bolt-On Adapters
Bolt-On
Tips
156
Excavators
EXCAVATOR BUCKET CONVERSION PROCEDURE
WIDTH
WIDTH (Inner side bar to inner side bar) Base Edge Thickness
WIDTH (Outer side bar to outer side bar)
Selection
Once you have measured the bucket width, OUTER SIDE BAR TO OUTER SIDE BAR, and
determined base edge thickness, turn to the following charts.
1. Select a base edge with length closest to, but not less than, the width of the bucket. The width of
the bucket must measure between the uncut length of the edge and its minimum cut length as
indicated on the chart.
2. The edge selected should be similar in thickness to the edge already in the bucket.
3. Choose the adapters and tips from columns below each selected base edge.
REMEMBER: Since all buckets are different, there is no “standard” way to convert buckets. Final
decisions on weldments, cutting, etc...must be made by the dealer.
NOTE: In many cases the minimum cut length for an edge is the same dimension as the regular
length for another edge.
157
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
L1 L1
W W
L2
A B B A
L2
TYPE 1 TYPE 2
158
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
159
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
160
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
161
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
162
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
163
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
164
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
165
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
166
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
167
Excavators
BASE EDGE ASSEMBLY DIMENSIONS
169
Excavators
BASE EDGE DIMENSIONS
TYPE 1 TYPE 2
170
Excavators
NOTES
171
Excavators
NOTES
172
5000 Series Shovels
173
5000 Series Shovels
5230 FRONT SHOVEL
174
5000 Series Shovels
5230 MASS EXCAVATION
175
5000 Series Shovels
5130B FRONT SHOVEL
176
5000 Series Shovels
5130B MASS EXCAVATION
177
5000 Series Shovels
5130B MASS EXCAVATION
178
5000 Series Shovels
5130 FRONT SHOVEL
179
5000 Series Shovels
5130 FRONT SHOVEL
180
5000 Series Shovels
5130 MASS EXCAVATION
181
5000 Series Shovels
5130 MASS EXCAVATION
182
5000 Series Shovels
5130 MASS EXCAVATION
183
5000 Series Shovels
5110B MASS EXCAVATION
184
5000 Series Shovels
5080 FRONT SHOVEL
185
5000 Series Shovels
5080 FRONT SHOVEL
186
5000 Series Shovels
5080 FRONT SHOVEL
187
5000 Series Shovels
5230 FRONT SHOVEL ABRASION PACKAGES
188
5000 Series Shovels
5230 FRONT SHOVEL ABRASION PACKAGES
189
5000 Series Shovels
5230 MASS EXCAVATION ABRASION PACKAGES
190
5000 Series Shovels
5130B FRONT SHOVEL ABRASION PACKAGES
191
5000 Series Shovels
5130B MASS EXCAVATION ABRASION PACKAGES
192
5000 Series Shovels
5130 FRONT SHOVEL ABRASION PACKAGES
193
5000 Series Shovels
5130 MASS EXCAVATION ABRASION PACKAGES
194
5000 Series Shovels
195
5000 Series Shovels
High Density
• 1.9-2.5 t/lcm (3200-4200 lbs/lcy)
• Dense shot rock, heavy ore
• High impact & abrasion
Rock
• 1.3-1.9 t/lcm (2200-3200 lbs/lcy)
• Shot rock, ore, consolidated overburden
196
5000 Series Shovels
High Abrasion
• 1.3-1.9 t/lcm (2200-3200 lbs/lcy)
• Rock bucket with increased protection
• Highly abrasive shot rock, ore, consolidated overburden
Low Density
• 1.2-1.5 t/lcm (2000-2500 lbs/lcy)
• Rock bucket configuration with increased capacity for low
density material
197
5000 Series Shovels
Coal
• 0.8-1.3 t/lcm (1350-2200 lbs/lcy)
• Coal, light rehandling
Custom
• In the event one of the available buckets does not meet
material, site, or system requirements, Caterpillar can
provide custom buckets
• Customizing can be done to fit volume, penetration,
or wear characteristic needs.
198
5000 Series Shovels
MINING SHOVELS
MINING SHOVELS
The Caterpillar Mining Edge Guard System (MEGS) of pin-on GET is a vital link in the performance of the
5000 series mining shovels; the 5230, 5130B and the 5130. Cat MEGS pin-on GET aids penetration for high work
output and fully protects the sides and edges of buckets, even between the bucket tips.
MEGS independently attached pin-on components can be quickly removed or replaced in the pit within minutes.
MEGS cuts maintenance downtime, saves money, and improves total machine production to help customers achieve
the optimal cost per ton (CPT).
MEGS comes in two configurations, front shovel (FS) and Mass Excavation (ME) and there are three main tip sys-
tems utilized depending on the size of the machine. The V1000 tip family uses both a two-piece tip system which
consists of a tip and coupler and a unique one piece penetration tip system. The penetration tip is unique in this size
class and provides substantial advantages over the traditional two-piece systems used on competitive machines.
The new V880 and V810 families use a conventional one-piece tip and adapter system with the tip held in place by
a solid pin and snap ring retainer. The older V780 and V680 tip families, which are being replaced with the V880
or V810, use the one-piece tip and adapter system with the tip held in place by a heavy-duty flex pin.
MEGS uses tips from the V-family, which are top-pinned. This is due to the market preference for this style of reten-
tion on these large GET components. All MEGS tips are made from DH-3 material to resist softening in high heat
applications. All other components are made from DH-2 material.
Edge assemblies, adapters, tips, couplers, edge protectors, and sidebar protectors are covered against breakage
throughout their useful life by the Caterpillar Ground Engaging Tool Warranty.
MEGS (V1000) Family
V1000 Assembly
The edge assembly consists of a base edge weld-on adapters and weld-on lugs.
One-Piece Tip
The one-piece penetration tip is the recommended tip option for the V1000 family. It provides superior performance
in terms of cost per hour, productivity, penetration, simplicity and ease of maintenance. With the one-piece penetration
tip, the coupler is not required and it’s important the correct pin and retainer are used.
199
5000 Series Shovels
MINING SHOVELS
The Coupler is the component between the adapter and tip, it can be used with multiple
sets of tips. For high abrasion low impact applications, an ARM coupler is also available.
Coupler Retention has been upgraded to a new style with a bottom installed pin. This
new style allows the retention to last the length of the coupler life without any mainte-
nance in all applications. It consists of a sleeve, a new retainer and a bottom installed
tapered pin. The sleeve is located in the top counterbore of the coupler to prevent the pin
from loading the retainer. The retainer assembly, which sits in the bottom counterbore, is
a one-way only design to permit the pin to lock in to the snap ring before it engages the
sleeve. The pin is tapered and can be quickly and easily installed from the bottom and dri-
ven out from the top at replacement time.
Tips in the two-piece system are top-pinned to the coupler with the pin held in place by a
snap ring style retainer assembly. There are two DH-3 tips to choose from; general pur-
pose and general purpose with ARM. Refer to the cross-reference chart in the “Tips” sec-
tion for details.
Edge and sidebar protectors are independently attached for quick and easy installation and removal. The edge pro-
tectors are held on by a solid pin and snap ring retainer assembly. Sidebar protectors can be rotated for extended life
and are independently attached using a flex pin.
V880 Assembly
The edge assembly consists of a base edge with weld-on adapters. The top-pinned tips are easy to install and remove
for fast on-site replacement and the tip/adapter juncture is patented to prevent the installation of competitive tips.
There are two main DH-3 tips to choose from in the V880 and V810 families; the general purpose tip and the pen-
etration tip. A sharp tip is also available for the V880 system. Refer to the chart in the “Tips” section for details.
The tips are held in place with a solid pin and snap ring retainer assembly. The snap ring retainer assembly is placed
in a counterbore in the bottom of the tip. The tip is installed over the adapter and retainer, and the pin is easily
installed and removed from the top.
Edge protectors are independently attached for quick and easy installation and removal using a solid pin and snap
ring retainer assembly. Sidebar protectors can be rotated for extended life and are independently attached using a flex
pin.
200
5000 Series Shovels
MINING SHOVELS
Tip Pin and Retainer Assembly for the V1000 consists of a grooved pin, snap ring retainer
assembly. All tips use the same retainer; however, a longer pin is required for the penetra-
tion tip. The spring assembly, previously used to hold the system tight, is no longer required.
Coupler Retention consists of the top located sleeve, bottom located one-way snap ring
retainer and assembly and a bottom-installed tapered pin.
Tip Pin and Retainer Assembly for the V880 and V810 are similar to the V1000 using a
grooved pin and snap ring. The retainer assembly is located in the bottom counterbore of
the tip.
201
5000 Series Shovels
MINING SHOVELS
Heavy Duty Flex-Pin is available for both the V780 and V680 families. The system con-
sists of a flex-pin and a retaining sleeve to distribute the load over a greater area.
Taper Lock Pin for the V780 Taper Lock system. The system consists of a two-piece pin
that screws together and can only be used with tips with a large diameter round pin hole.
Currently only a GP tip is available.
Adapters:
When possible, the corner adapter comes with a crest. The addition of the crest enables
the weld to be moved out of the corner to reduce the potential for a stress riser in the
corner weld. The crest also consists of two lugs on either side. These are used to engage
the sidebar and eliminate the need for the bottom pin.
Sidebar Protectors protect bucket corners and sides from wear in mod-
erate to high wear rate material applications and aid in penetrating
densely compacted material. These are held in place using flex-pins.
When used in conjunction with a crested corner adapter, the lugs on
either side of the crest hold the bottom of the sidebar protector in place
and only one pin is required in the top hole. When a crested corner is
not available, both the top and bottom pins are required. Sidebar pro-
tectors are reversible to maximize the use of available wear material and
minimize CPH. When replacing base edges and corner adapters, it is
important that they are positioned correctly, otherwise the top pin hole
will be out of alignment.
202
5000 Series Shovels
MINING SHOVELS
203
5000 Series Shovels
MINING SHOVELS
As shown, not all tip styles are available for each model. The following cross-reference chart helps quickly identify
the tip style available for each model and by machine configuration.
Wear Plates
Hardened, medium carbon steel plates are the primary form of abrasion resistance
on Cat 5130, 5130B and 5230 buckets. Wear plates are strategically placed in the
high-wear areas to protect the bucket without adding excess weight and metal
where it is not needed.
Cat ARM has been researched, tested and proven to be more durable and efficient
than competitive offerings. However, using ARM in high-impact applications can
result in some of the ARM chipping off. In extreme high-impact conditions, ARM
may not be the most cost effective option.
204
5000 Series Shovels
MINING SHOVELS
205
5000 Series Shovels
MINING SHOVELS
Penetration/GP/ Penetration/
High
Penetration Tips
GP ARM Tips* GP ARM Tips*
Standard Wear Pkg
ARM Wear Package ARM Wear Package
PENETRATION
Wear Plate
DURABILITY
Medium
PENETRATION
*The 5230 one-piece penetration tip is recommended for all applications, as it provides the best
penetration, tip life, and cost per hour. When there is a preference for a two-piece system, use the
General Purpose in high impact and the GP A.R.M. in low-impact/high-abrasion applications.
DURABILITY
Medium
PENETRATION
*Since good penetration will enhance machine performance in most applications, the penetration
tip should be used initially. If penetration is not a concern, then change to the General Purpose tip
with its increased wear material to lower cost per hour.
FS use V810 Family.
ME use V880 Family.
206
5000 Series Shovels
MINING SHOVELS
207
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
208
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
Pin installation is relatively simple and easy; however, it’s important to be familiar with
the following procedures before installation. Failure to correctly install may result in pre-
mature failure and coupler loss.
1. Remove the protective tape from the adhesive band on the top of the sleeve. Install the
sleeve in the coupler’s top counterbore from the inside. When installed correctly, the
large portion of the sleeve sits in the counterbore and the thinner sleeve is located in the
pin hole. Ensure the sleeve is held in place by the tape.
The only purpose of the tape is to hold the sleeve in place during installation.
2. Place the “one way” retainer assembly in the bottom counterbore of the coupler. The steel
washer sits in the bottom of the counterbore and the tabs face up. “This Side Up” will be
displayed on the top of the tab ring.
4. Install the pin in the bottom coupler pin hole with the tapered end in first. Make sure the
pin is centered in the retainer assembly. Using light hammer blows with a 5 lb (2.3 kg)
hammer, drive the pin up through the retainer. It may take some effort to expand the
snap ring initially, however, once the retainer is on the full diameter of the pin, the pin
will drive in easily. A final gentle blow will enable the snap ring to drop into the pin
groove. Check to see if the snap ring is properly seated by tapping on the head of the pin.
When seated, a solid ping will be heard and the joint will feel solid.
209
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
If the pin is hit with excessive force just before the snap ring is engaged in the pin groove,
the retainer and pin may be damaged. This will result in a premature failure. If this
occurs both the pin and retainer must be replaced.
Note: The pin, retainer assembly and sleeve are not reusable.
Removal
1. To remove the retention system or replace the coupler, use the 1U7184 pin removal tool,
a 12-20 lb. (5.5-9.1 Kg) hammer and remove the pin from the top.
2. Place the pin removal tool (IU7184) on the top of the pin as shown in the illustration. It
will take several hard blows with the hammer to shear the retainer and drive the pin out.
Once the retainer is sheared, the pin may drive out completely. Ensure the pin will not
contact anything on its way out and can be removed safely.
WARNING
Wear safety glasses with protective side shields. Personal injury may occur if proper safety
equipment is not worn.
210
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
5. Line up the protector holes over the lug and retainer holes using a pry bar.
6. Insert the tapered end of the pin down through the top of the cover and into the retainer assembly. Drive the pin down
through the retainer with light hammer blows until the snap ring engages the pin groove. When this occurs, a dis-
tinct sound is heard and a high resistance is felt with further hammering.
7. Tap the pin up from the bottom to ensure the snap ring is seated in the pin groove.
211
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
Removal
WARNING: Wear safety glasses with protective side shields. Personal injury may occur if proper safety equip-
ment is not worn.
1. Use the 1U7184 Pin Removal Tool and a 1U7245 Dead Blow Sledge to drive out the pins as shown below.
2. Heavy blows will be required to shear or unseat the retainer assemblies from the pin groove.
3. Do not reuse either the pins or retainer assemblies. Removal of these components eliminate their ability to function.
212
5000 Series Shovels
5000 SERIES INSTALLATION PROCEDURES
Pin Removal
NOTICE
Do not reuse used pins. Used pins may come out during oper-
ation and cause the loss of bucket tips, edge covers or side-
bar protectors. This results in damage to the bucket.
Competitive Conversions:
The MEGS bucket edge assemblies and sidebars can be retrofitted on competitive FS and ME Buckets of simi-
lar sized hydraulic excavators and shovels. Measurement of the competitive bucket need to be taken from outside
sidebar to outside sidebar and compared to the Cat edge assembly length. If the Cat edge assembly length is similar
to the competitive bucket width, the Cat assembly can be used. If, however, the competitive bucket width is not sim-
ilar to the Cat edge assembly length, a custom edge assembly can be provided.
Orders will take up to 30 days to produce, plus shipping time. Information required is outside of sidebar to outside
of sidebar measurement, edge thickness, number of tips, spade dimension (forward and width). Modifications may
be required at the rear of the edge assembly and sidebar locations of the competitive buckets. Call 1-800-BUCKET-4-U
for required information.
Special Instructions:
Retention
• See Special Instruction SEHS9733 for tip, edge protectors, and sidebar protector pin installation/removal
procedures. Use 1U7184 pin removal tool.
• See Special Instruction SEHS9927 for installing the Heavy Duty Flex-Pin.
• See Special Instruction REHS0016 for installation and removal of V1000 tip and coupler heavy duty GET
pins and retainers.
Welding
• See Special Instruction SEHS9810 for welding adapters and lugs onto base edges and welding adapter noses
onto adapters.
• Remember, quality welding is critical in achieving optimal life from these components.
• Lug welding instructions are available as a service magazine article.
Always use a new pin when installing tips, edge protectors, or sidebar protectors.
Publications:
The following publications relate to mining shovel GET:
Built Tough for Mining PEDP0044
Best Tools in the Trade for All Your Aggregate PEHP3079
Adapter/Base Edge Welding Special Instructions SEHS9810
Pin Installation/Removal Special Instructions SEHS9733
Training Package—5130 GET—Basics & Sales Opportunities PEST4175
5130 Heavy Duty Flex Pin Assembly SEHS9927
Installation of V1000 Tip and Coupler Pins and Retainers REHS0016
5130 Hydraulic Shovel/Backhoe PEHP3079
5130 Machine Specification AEHQ3875
5130 Hydraulic Shovel/Backhoe Specalog AEHQ5043
5230 Specalog AEHQ5044
5230 Salesgram TEKQ6151
5130/5230 Mining Shovels - Selecting the Right Bucket and GET for Your Job AEKK0898
5130 & 5230 Buckets and GET Design Improvements & Product Offerings TEKQ5384
V1000 GET System Options PEHP7070
V880/V810 GET System Options PEHP7071
GET Inspection and Maintenance Guide PEXT8033
Procedure to Install Wear Protection on Base Edges and Adapters REHS0434
214
5000 Series Shovels
NOTES
215
5000 Series Shovels
NOTES
216
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
217
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER TOOLS AND COMPONENTS Here’s a listing of the manuals and their literature order
numbers:
Caterpillar Hydraulic Hammer Tools and components are Balderson Serial Operation &
available for Cat Hydraulic Excavators and Backhoe Hammer Number Maintenance Service
Loaders. The hammer tools and components are available Model Prefix Manual Manual
in the Caterpillar Parts Distribution Network. B700 B700 SEBF0689 SEBF0688
B900 B900 SEBF0691 SEBF0690
Manuals are available for each hammer. The Operation & B110 B110 SEBF0693 SEBF0692
Maintenance Manual (OMM) is intended for customer B115 B115 SEBF0695 SEBF0694
use and is shipped with each hammer. The Service B130 B130 SEBF0697 SEBF0696
Manual, for dealer use, includes the contents of the OMM B140 B140 SEBF0699 SEBF0698
plus sections on Assembly and Disassembly. All manuals B160 B160 SEBF0701 SEBF0700
can be ordered through the Cat Literature system. B170 B170 SEBF0703 SEBF0702
B195 B195 SEBF0705 SEBF0704
B130 B 4RL SEBF0766 SEBF0767
SERVICE MANUALS
Hammer Model 63 70 90 100 115 120
Serial Number Prefix 4GL 4KL 4LL 4LM 4PL 9MM
Service Manual HENR9001 HENR9010 HENR9020 HENR9100 HENR9110 HENR9120
Safety SENR7733 SENR7733 SENR7733 SENR7733 SENR7733 SENR7733
Service Manual Contents HENR9002 HENR9011 HENR9021 HENR9101 HENR9111 HENR9121
Torque Specifications SENR3130 SENR3130 SENR3130 SENR3130 SENR3130 SENR3130
Specifications HENR9003 HENR9012 HENR9022 HENR9102 HENR9112 HENR9122
System Operation HENR9004 HENR9004 HENR9004 HENR9004 HENR9033 HENR9033
Testing & Adjusting HENR9005 HENR9005 HENR9005 HENR9005 HENR9034 HENR9034
Disassembly & Assembly HENR9006 HENR9015 HENR9025 HENR9105 HENR9115 HENR9125
Service Tools HENR9007 HENR9016 HENR9026 HENR9106 HENR9116 HENR9126
Operation & Maintenance HEBU9001 HEBU9001 HEBU9001 HEBU9001 HEBU9002 HEBU9002
Parts Book HEBP9001 HEBP9002 HEBP9003 HEBP9004 HEBP9006 HEBP9007
218
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
Igneous and Tough Sedimentary and Weak Very soft and Hard and
Metamorphic Rock Metamorphic Rock easily breaking, abrasive rock
into which tool into which tool penetrates non-abrasive with cracks
doesn't penetrate rock
Concrete Low
Concrete High penetration
Trenching penetration rate
Breaking rate
boulders Benching
219
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
220
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
221
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER NOMENCLATURE
HAMMER NOMENCLATURE
1st Generation:
“B” represents the original powercell with side plate and housings that were the same as Rammer only painted Cat
yellow, except for the B170 and B195 which are now painted black.
Models: B70, B90, B110, B115, B130, B140, B160, B170, B195
2nd Generation:
When the Cat style side plates and housings became available, the “B” was dropped and the model designation
became strictly numeric – representing the original powercell with the new side plate/housing design. This
generation also included all the warning plates and decals.
Models: 63, 70, 90, 100, 130, 140, 160, 180
3rd Generation:
The 115, 120, 130 and 180 currently in production have NEW powercells with the same CAT style housing.
These hammers were internally called 115C, 120C, 130C and 180C, but the C was not part of the hammer model
shown on the hammer when sold to the dealers.
Models: 115, 120, 130, 180
These hammers were the same as the previous hammers with the following new hammers 45, 50, 90C and 120C.
The small s is for the silenced version hammers.
Models: H45, H45 s, H50, H50 s, H63, H63 s, H70, H70 s, H90C, H90C s, H100, H100 s, H115 s, H120C s,
H130 s, H140 s, H160 s, H180 s, H195
222
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER NOMENCLATURE
223
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
224
HAMMER MATCHING GUIDE
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.9J 9'6" E S
MASS 3.4J 11'2" EO S
4.1J 13'5" EO S
2.9J 9'6" E S
375 GP 3.4J 11'2" EO S
4.4H 14'5" S
5.5H 18'1" S
2.9J 9'6" EO S
REACH 4.4H 14'5" S
5.5H 18'1" S
2.4G 7'10" EO EO S
MASS 3.0G 9'10" EO EO S
350, 3.7F 12'2" S
345B 3.1F 10'2" EO EO S
REACH 3.6F 11'10" S
4.8F 15'9" S
2.2E 7'3" EO S G
MASS 2.6E 8'6" EO S G
3.5D 11'6" EO S G
330, 2.2E 7'3" EO S G
330B 2.8D 9'2" EO S G
REACH 3.3D 10'10" EO S G
3.9D 12'9" EO S G
4.8C 15'9" EO S
2.0D 6'7" E S G
MASS 2.5D 8'2" EO S G
325, 3.2C 10'6" EO S G
325B 2.0D 6'7" EO S G
REACH 2.7C 8'10" EO S G
3.2C 10'6" EO S G
4.2B 13'9" S G
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
225
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
HAMMER MATCHING GUIDE
226
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.0D 6'7" EO S G
MASS
2.5D 8'2" EO S G
322, 2.0D 6'7" EO S G
322B 2.5S 8'2" S G
REACH
2.95S 9'8" EO S
HAMMER MATCHING GUIDE
3.6B 11'10" S
1.9C 6'3" EO S G
MASS 2.4C 7'10" EO S G
2.9B 9'6" S G
320,
1.9C 6'3" EO S G
320B
2.5B 8'2" S G
REACH
2.9B 9'6" S G
3.9B 12'9" S G
1.9 6'3" E S G
2.5 8'2" S G
M320 REACH
2.9 9'6" S G
4.2 13'9" S
1.8 5'11" E S
MASS 2.4 7'10" E S
VA 2.8 9'2" S
4.0 13'2" S
M318
1.8 5'11" E S
2.4 7'10" E S
REACH
2.8 9'2" S
4.0 13'2" S
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
HAMMER MATCHING GUIDE
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
1.85 6'1" E S
2.25 7'5" E S
317 REACH
2.6 8'6" S
3.1 10'2" S
1.7 5'7" E S G G
2.1 6'11" S G G
MASS
2.4 7'10" S G G
VA
2.6 8'6" S G G
3.1 10'2" S G G
M315
1.7 5'7" E S G G
2.1 6'11" S G G
REACH 2.4 7'10" S G G
2.6 8'6" S G G
3.1 10'2" S G G
1.85 6'1" E S G G
2.25 7'5" S G G
315 REACH
2.6 8'6" S G G
3.1 10'2" S G G
1.6 5'3" E S S
2.0 6'6" S S
MASS
2.3 7'5" S S
VA
2.6 8'5" S S
3.0 9'9" S S
M312
1.6 5'3" E S S
2.0 6'6" S S
REACH 2.3 7'5" S S
2.6 8'5" S S
3.0 9'9" S S
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
227
HAMMER MATCHING GUIDE
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
228
300 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.1 6'11" E S S
312,
REACH 2.5 8'2" E S S
312B
3.0 9'10" S S
1.95 6'5" S G G
311,
REACH 2.25 7'5" S G G
HAMMER MATCHING GUIDE
311B
2.8 9'2" S G G
OFFSET 1.7 5'6" S G G
307,
1.7 5'6" S G G
307B REACH
2.2 7'3" S G G
302.5 S G
301.5 S
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
EO — Extreme Duty/Occasional Usage - oversized boulders, granite, caliche, etc. (30% or less of machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
200 FAMILY EXCAVATORS
Machine Boom Stick Hammer Model
Cat Hammer Models H195 H180 s H160 s H140 s H130 s H120 s H115 s H100 s H90C s H70 s H63 s H50 s H45 s
Interim Hammer Models 195 180 170 160 140 130 120 115 100 90 70 63
Balderson Hammer Models B195 B170 B160 B140 B130 B115 B110 B90 B70
2.59 8'6" E S S
245D STD 3.20 10'6" E S S
4.42 14'6" E S S
2.44 8'0" S G G
235D STD 2.90 9'6" S G G
3.66 12'0" S G G
2.30 7'7" E S
231D STD 2.90 9'6" E S
3.50 11'6" E S
1.98 6'6" E S
229D,
STD 2.44 8'0" E S
225D
3.05 10'0" E S
1.80 5'11" E S
2.20 7'3" E S
219D STD 2.80 9'2" E S
3.40 11'2" E S
4.00 13'2" E S
1.80 5'11" E S
215D STD 2.20 7'3" E S
2.80 9'2" E S
1.80 5'11" E S S
214B, 2.30 7'7" E S S
STD
213B 2.80 9'2" E S S
4.00 13'2" E S S
1.60 5'3" S S G
212B, 2.30 7'7" S S G
STD
211B 2.80 9'2" S S G
4.00 13'2" S S G
1.60 5'3" E E S G G
206B,
STD 2.10 6'11" E E S G G
205B
2.60 8'6" E E S G G
S — Standard Duty - for all applications/best match for machine and hammer (60% or more machine hours)
E — Extreme Duty - oversized boulders, granite, caliche, etc. (30 to 60% of machine hours)
G — General Duty - for loose or easy to break material (60% or more machine hours)
229
HAMMER MATCHING GUIDE
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
HAMMER MATCHING GUIDE
230
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Models are:
Shears Pulverizers Grapples Multi-
Hydraulic Mechanical Concrete Mechanical Crushers (Contractors) Processor
S230/S30 S115 P16 P115 CR20 G112 MP15
S240/S40 S128 P25 P120 CR28 G115 MP20
S250/S50 P28 P130 CR35 G125 MP30
S280/S80 P40 P140 CR50 G140 MP40
2130 P60
Matching excavators for shears, pulverizers, crushers, grapples, mechanical tools and multi-processors are shown
as follows.
Shears
231
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Shears (continued)
Stick Mounted Shears
Long Undercarriage
Machine Boom Stick S80 S50 S40 S30 S25
375 L GP 5.5 m 18'0" X
750 mm (2'6") shoes 4.4 m 14'5" X
3.4 m 11'2" X
2.9 m 9'6" X X
375 L Reach 5.5 m 18'0" X X
750 mm (2'6") shoes 4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
750 mm (2'6") shoes 3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X
750 mm (2'6") shoes 4.05 m 13'3" X
3.6 m 11'10" X
3.1 m 10'2" X X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X X
330B L Reach 3.9 m 12'10" X
750 mm (2'6") shoes 3.3 m 10'10" X X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X
322B L Reach 3.6 m 11'10" X
2.95 m 9'8" X
2.5 m 8'2" X
320B L Reach 3.9 m 12'10"
2.9 m 9'6"
2.5 m 8'2"
1.9 m 6'3" X
232
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
Pulverizers
Pulverizers
Long Undercarriage
Machine Boom Stick P60 P40 P28 P25 P20 P16
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X X
4.05 m 13'3" X X
3.6 m 11'10" X
3.1 m 10'2" X X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X X
330B L Reach 3.9 m 12'10" X
3.3 m 10'10" X X
325B L Reach 3.2 m 10'6" X X
2.7 m 8'10" X X X
322B L Reach 3.6 m 11'10" X X
2.95 m 9'8" X X
2.5 m 8'2" X X
320B L Reach 3.9 m 12'10" X
2.9 m 9'6" X
2.5 m 8'2" X
1.9 m 6'3" X
233
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CRUSHERS
Crushers
Crushers
Long Undercarriage
Machine Boom Stick CR50 CR35 CR28 CR20
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X
3.4 m 11'2" X
2.8 m 9'2" X
350 L Reach 4.8 m 15'9" X
4.05 m 13'3" X
3.6 m 11'10" X
3.1 m 10'2" X
345B L-F Reach 4.8 m 15'9" X
3.9 m 12'10" X
3.4 m 11'2" X
345B L-V Reach 3.9 m 12'10" X
3.4 m 11'2" X
330B L Reach 3.9 m 12'10" X
3.3 m 10'10" X
325B L Reach 3.2 m 10'6" X
2.7 m 8'10" X
322B L Reach 3.6 m 11'10" X
2.95 m 9'8" X
2.5 m 8'2" X
320B L Reach 3.9 m 12'10"
2.9 m 9'6"
2.5 m 8'2"
1.9 m 6'3" X
234
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — GRAPPLES
Grapples
235
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MECHANICAL TOOLS
Mechanical Tools
Mechanical Tools
Long Undercarriage
Machine Boom Stick P140 P130 P120 P115 S128 S115 G140 G125 G115 G112
375 L GP 5.5 m 18'0" X
4.4 m 14'5" X
375 L Reach 5.5 m 18'0" X
4.4 m 14'5" X
2.9 m 9'6" X
365B L Reach 4.67 m 15'4" X X
3.4 m 11'2" X X
2.8 m 9'2" X X
350 L Reach 4.8 m 15'9" X X X
4.05 m 13'3" X X X
3.6 m 11'10" X X X
3.1 m 10'2" X X X
345B L-F Reach 4.8 m 15'9" X X X
3.9 m 12'10" X X X
3.4 m 11'2" X X X
345B L-V Reach 3.9 m 12'10" X X X
3.4 m 11'2" X X X
330B L Reach 3.9 m 12'10" X X X X
3.3 m 10'10" X X X X
325B L Reach 3.2 m 10'6" X X X
2.7 m 8'10" X X X
322B L Reach 3.6 m 11'10" X X X X
2.95 m 9'8" X X X X
2.5 m 8'2" X X X X
320B L Reach 3.9 m 12'10" X X
2.9 m 9'6" X X X X
2.5 m 8'2" X X X X
1.9 m 6'3" X X X X
318B L 3.2 m 10'6" X X
2.7 m 8'10" X X X
2.25 m 7'5" X X X
315B L 3.1 m 10'2" X
2.6 m 8'6" X X
2.25 m 7'5" X X
236
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Multi-Processors
Recommended parts for these new products are shown in the attached high wear GET including cutters, tips and
teeth.
237
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Recommended Parts List — Model S30 Recommended Parts List — Model S80
Part Number Description Quantity Part Number Description Quantity
144-3230 Wear Cutter 1 144-6176 Wear Plate 1
144-3232 Wear Plate 1 144-6177 Wear Plate 1
144-3233 Wear Plate 1 144-8979 Wear Plate 1
144-3234 Wear Plate 1 144-6179 Wear Plate 1
144-3235 Wear Plate 1 144-8009 Wear Plate 1
144-3236 Piercing Tip 1 144-8010 Wear Plate 1
144-3195 Main Cutter 2 144-8011 Wear Plate 1
144-3199 Front Cutter (upper) 1 144-8012 Wear Plate 11
144-3201 Front Cutter (lower) 1 144-8014 Main Cutter 11
144-3205 Side Cutter 1 144-8015 Front Cutter 1
144-3087 Bolt 8 144-5232 Front Cutter 1
144-2715 Bolt 2 144-5233 Side Cutter 1
8T4131 Nut 10 144-5229 Main Cutter 1
8T4123 Washer 10 144-8016 Bolt 5
144-3211 Shim 2 144-8017 Nut 5
144-3210 Shim 2 144-8018 Washer 5
144-3214 Shim 2 144-3087 Bolt 8
144-3213 Shim 2 8T4131 Nut 8
144-3217 Shim 2 8T4123 Washer 8
144-3216 Shim 2 144-6165 Shim 2
144-6166 Shim 2
Recommended Parts List — Model S50 144-6168 Shim 2
144-6169 Shim 2
Part Number Description Quantity
144-6171 Shim 2
144-5245 Wear Plate 11
144-6172 Shim 12
144-4246 Wear Plate 1
144-8013 Piercing Tip 11
144-5247 Wear Plate 1
144-6596 Wear Plate 1
144-6597 Wear Plate 1
144-6598 Wear Plate 1
144-6599 Wear Plate 1
144-6601 Main Cutter (upper jaw) 1
144-5229 Front Cutter (upper jaw) 1
144-6602 Main Cutter (lower jaw) 1
144-5232 Front Cutter (lower jaw) 1
144-5233 Side Cutter 1
144-6589 Bolt 5
144-8017 Nut 5
144-8018 Washer 5
144-3087 Bolt 6
144-2687 Bolt 12
8T4131 Nut 18
8T4123 Washer 8
144-5235 Shim 2
144-5234 Shim 2
144-5238 Shim 2
144-5237 Shim 2
144-5240 Shim 2
144-5241 Shim 2
144-6600 Piercing Tip 1
238
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Recommended Parts List — 144-0962 Cutting Edge Group Recommended Parts List — 144-0969 Cutting Edge Group
S/N 2RW1-UP S/N 8WS1-UP
Part of 144-0958 Shear AR — Hydraulic Part of 144-0963 Shear AR — Hydraulic
Part Number Description Quantity Part Number Description Quantity
8T4131 Nut (M2032.50 thread) 10 145-4078 Lockwasher 10
144-2687 Screw – flat head 4 8T4131 Nut (M2032.50 thread) 10
144-2698 Screw – flat head 2 144-2715 Screw – flat head 2
144-2715 Screw – flat head 4 144-3087 Screw – flat head 8
165-1465 Cutter – main 2 165-1467 Cutter – main 2
165-1484 Cutter – front 1 165-1485 Cutter – front 1
165-1475 Cutter – front 1 165-1476 Cutter – front 1
165-1479 Cutter – side 1 165-1480 Cutter – side 1
144-3210 Shim (1 mm thick) 1 144-3210 Shim (1 mm thick) 1
144-3211 Shim (0.5 mm thick) 2 144-3211 Shim (0.5 mm thick) 1
144-3212 Shim (0.3 mm thick) 2 144-3212 Shim (0.3 mm thick) 2
144-2792 Shim (1 mm thick) 1 144-3213 Shim (1 mm thick) 1
144-2793 Shim (0.5 mm thick) 2 144-3214 Shim (0.5 mm thick) 1
144-2794 Shim (0.3 mm thick) 2 144-3215 Shim (0.3 mm thick) 2
144-2789 Shim (1 mm thick) 1 144-3216 Shim (1 mm thick) 1
144-2790 Shim (0.5 mm thick) 2 144-3217 Shim (0.5 mm thick 1
144-2791 Shim (0.3 mm thick) 2 144-3219 Shim (0.3 mm thick) 2
145-4078 Lockwasher 10 165-7046 Cutter – wear 1
144-5173 Tip – wear 1 144-3231 Plate – wear 1
144-5172 Plate – wear 1 144-3232 Plate – wear 1
144-5171 Plate – wear 1 144-3233 Plate – wear 1
144-5170 Plate – wear 1 144-3234 Plate – wear 1
144-5169 Plate – wear 1 144-3235 Plate – wear 2
165-7047 Cutter – wear 1 144-3236 Tip – wear 1
144-5167 Plate – wear 1
144-5168 Plate – wear 1 Recommended Parts List — 152-3686 Cutting Edge Group
S/N 3BW1-UP Model S240
Part of 152-3848 Shear AR — Hydraulic
Part Number Description Quantity
165-1471 Cutter – main 4
165-1473 Cutter – side 2
152-3691 Shim (1 mm thick) 4
152-3694 Shim (0.5 mm thick) 8
152-3695 Shim (0.3 mm thick) 8
152-3696 Shim (1 mm thick) 2
152-3697 Shim (0.5 mm thick) 4
152-3698 Shim (0.3 mm thick) 4
144-6589 Screw – flat head 9
8T4001 Nut (M2433.00 thread) 10
8T4167 Washer (4.0 mm thick) 10
153-9767 Screw – flat head 1
239
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — SHEARS
Recommended Parts List — 156-4985 Cutting Edge Group Recommended Parts List — 144-1001 Cutting Edge Group
S/N 3KW1-UP Model S250 S/N 4TW1-UP Model S2130
Part of 155-4962 Shear AR — Hydraulic Part of 144-0997 Shear AR — Hydraulic
Part Number Description Quantity Part Number Description Quantity
8T4131 Nut (M2032.50 thread) 14 8T4001 Nut (M2433.00 thread) 15
144-2715 Screw – flat head 1 159-1122 Lockwasher 15
144-3087 Screw – flat head 13 144-5965 Screw – flat head 13
145-4078 Lockwasher 14 144-5966 Screw – flat head 2
156-4968 Shim (1 mm thick) 2 165-1472 Cutter – main 2
156-4969 Shim (0.5 mm thick) 2 165-1478 Cutter – front 1
156-4970 Shim (0.3 mm thick) 4 165-1483 Cutter – side 1
156-4971 Shim (1 mm thick) 2 144-6090 Shim (1 mm thick) 1
156-4972 Shim (0.5 mm thick) 2 144-6091 Shim (0.5 mm thick) 1
156-4973 Shim (0.3 mm thick) 4 144-6092 Shim (0.3 mm thick) 2
156-4975 Plate – wear 3 144-6093 Shim (1 mm thick) 1
156-4976 Plate – wear 1 144-6094 Shim (0.5 mm thick) 1
156-4978 Plate – wear 1 144-6095 Shim (0.3 mm thick) 2
156-4979 Plate – wear 1 144-6096 Shim (1 mm thick) 1
156-4980 Plate – wear 1 144-6097 Shim (0.5 mm thick) 1
156-4981 Tip – wear 1 144-6098 Shim (0.3 mm thick) 2
165-1420 Cutter – main 4 144-8028 Tip – wear 1
165-1474 Cutter – side 2 144-8027 Plate – wear 1
165-5228 Plate – wear 1 144-8026 Plate – wear 1
144-8025 Plate – wear 1
Recommended Parts List — 160-7476 Cutting Edge Group 144-6105 Plate – wear 1
S/N 4FW1-UP Model S280 165-1470 Cutter – front 1
Part of 158-4935 Shear AR — Hydraulic 144-6100 Plate – wear 1
Part Number Description Quantity 144-6101 Plate – wear 1
8T4131 Nut (M2032.50 thread) 14 144-6102 Plate – wear 1
144-3087 Screw – flat head 8 144-6103 Plate – wear 1
144-5481 Screw – flat head 6 144-6104 Plate – wear 1
145-4078 Lockwasher 14
156-4968 Shim (1 mm thick) 2 Recommended Parts List — 157-4805 Cutting Edge Group
156-4969 Shim (0.5 mm thick) 2 PIN 7HZ1-UP Model S3
156-4970 Shim (0.3 mm thick) 4 Part of 147-7794 Shear AR — Hydraulic
160-7479 Shim 2 Part Number Description Quantity
160-7483 Shim 2 157-0949 Screw – flat head 2
160-7484 Shim 4 157-4789 Edge – cutting 2
160-7485 Plate – wear 2 157-4795 Shim 4
160-7486 Plate – wear 1 157-4796 Shim 2
160-7487 Plate – wear 1 157-4797 Shim 2
160-7488 Plate – wear 2 157-4798 Edge – cutting 1
160-7489 Plate – wear 1 157-4799 Shim 2
160-7490 Tip – wear 1 157-4800 Shim 1
165-1474 Cutter – side 2 157-4801 Shim 1
165-5230 Plate – wear 1 159-1118 Lockwasher 2
165-6914 Cutter – main 4 159-1119 Lockwasher 4
160-0018 Screw – flat head 4
8T4133 Nut (M1031.50 thread) 2
8T4244 Nut (M1231.75 thread) 4
240
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
Recommended Parts List — Model P16 Recommended Parts List — Model P40
Part Number Description Quantity Part Number Description Quantity
145-0626 Tooth 5 145-3584 Tooth 7
145-0628 Cutter 2 145-3585 Cutter 2
145-1892 Bolt (cutter ret. bolt) 6 144-2715 Bolt (cutter ret. bolt) 6
8T4132 Nut 6 8T4131 Nut 6
095-0819 Washer 6 145-4078 Lockwasher 6
8T4648 Bolt (tooth ret. bolt) 15 7X2555 Hexbolt 7
8T4244 Nut 15 8T4132 Nut 7
145-0630 Shim 2 145-3586 Shim 2
145-0631 Shim 2 145-3587 Shim 2
145-0629 Shim 2 145-3588 Shim 2
145-3589 Shim 2
241
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — PULVERIZERS
Recommended Parts List — 145-0746 Tooth & Cutting Edge Group Recommended Parts List — 145-3482 Tooth & Cutting Edge Group
S/N 4GW1-UP Model P20 S/N 2WW1-UP Model P28
Part of 145-0742 Pulverizer AR — Hydraulic Part of 145-3478 Pulverizer AR — Hydraulic
Part Number Description Quantity Part Number Description Quantity
8T4132 Nut (M1632.00 thread) 6 7X2555 Bolt (M1632.00380 mm) 21
8T4244 Nut (M1231.75 thread) 21 8T4132 Nut (M1632.00 thread) 27
8T4648 Bolt (M1231.75370 mm) 21 159-1121 Lockwasher 6
159-1121 Lockwasher 6 144-2135 Bolt 6
144-2135 Bolt 6 145-0735 Tooth – crushing 21
145-0626 Tooth – crushing 21 165-1459 Cutter 6
165-1456 Cutter 6 145-3514 Spacer (0.5 mm thick) 1
145-0774 Spacer (0.5 mm thick) 1 145-3515 Spacer (1 mm thick) 1
145-0775 Spacer (1 mm thick) 1 145-3516 Spacer (1.5 mm thick) 1
145-0776 Spacer (1.5 mm thick) 1 145-3517 Spacer (2 mm thick) 1
145-0777 Spacer (2 mm thick) 1
Recommended Parts List — 145-3596 Tooth & Cutting Edge Group
Recommended Parts List — 145-3524 Tooth & Cutting Edge Group S/N 3RW1-UP Model P60
S/N 3FW1-UP Model P40 Part of 145-3592 Pulverizer AR — Hydraulic
Part of 145-3519 Pulverizer AR — Hydraulic Part Number Description Quantity
Part Number Description Quantity 7X2555 Bolt (M1632.00380 mm) 21
7X2555 Bolt (M1632.00380 mm) 21 8T4131 Nut (M2032.50 thread) 6
8T4131 Nut (M2032.50 thread) 6 8T4132 Nut (M1632.00 thread) 21
8T4132 Nut (M1632.00 thread) 21 144-2687 Screw – flat head 21
144-2715 Screw – flat head 6 145-3584 Tooth – crushing 21
145-3584 Tooth – crushing 21 165-1463 Cutter 6
165-1463 Cutter 6 145-3653 Spacer (0.5 mm thick) 1
145-3586 Spacer (0.5 mm thick) 1 145-3654 Spacer (1 mm thick) 1
145-3587 Spacer (1 mm thick) 1 145-3655 Spacer (1.5 mm thick) 1
145-3588 Spacer (1.5 mm thick) 1 145-3656 Spacer (2 mm thick) 1
145-3589 Spacer (2 mm thick) 1 145-4078 Lockwasher 6
145-4078 Lockwasher 6
242
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CRUSHERS
Recommended Parts List — Model CR28 Recommended Parts List — 145-5512 Tooth & Cutting Edge Group
S/N 4DW1-UP Model CR50
Part Number Description Quantity
Part of 145-5510 Crusher AR — Hydraulic
144-3763 Tooth 2
Part Number Description Quantity
145-0736 Cutter 2
157-0949 Screw – flat head 8
145-0738 Shim 2
8T4132 Nut (M1632.00 thread) 8
145-0739 Shim 2
8T4244 Nut (M1231.75 thread) 4
145-4043 Shim 2
8T4910 Bolt (M1231.75360 mm) 4
145-4044 Shim 2
159-1121 Lockwasher 8
7X2554 Bolt (tooth ret. bolt) 4
144-2531 Bolt 8
9X8257 Washer 4
145-5516 Tooth – crushing 4
8T4132 Nut 4
145-5548 Spacer 1
144-2531 Bolt (cutter ret. bolt) 6
145-5550 Spacer 1
095-0819 Washer 6
145-5551 Spacer 1
145-4045 Plate 2
145-5552 Spacer 1
145-5553 Plate 2
Recommended Parts List — Model CR35 165-1496 Cutter 4
Part Number Description Quantity
145-0735 Tooth 2 Recommended Parts List — 145-4023 Tooth & Cutting Edge Group
145-4796 Cutter 2 S/N 5BW1-UP Model CR35
145-4797 Shim 2 Part of 145-4077 Crusher AR — Hydraulic
145-4798 Shim 2 Part Number Description Quantity
145-4799 Shim 2 157-0949 Screw – flat head 12
145-4800 Shim 2 7X2555 Bolt (M1632.00380 mm) 4
7X2555 Bolt (tooth ret. bolt) 4 8T4131 Nut (M2032.50 thread) 12
9X8257 Washer 4 8T4132 Nut (M1632.00 thread) 4
8T4132 Nut 4 9X8257 Washer (3.50 mm thick) 4
145-4075 Bolt (cutter ret. bolt) 6 145-0735 Tooth – crushing 4
8T4131 Nut 6 145-4075 Bolt 12
8T4123 Washer 6 145-4078 Lockwasher 12
145-4801 Plate 2 165-1500 Cutter 4
145-4797 Spacer (0.5 mm thick) 1
Recommended Parts List — 145-5774 Tooth & Cutting Edge Group 145-4798 Spacer (1 mm thick) 1
S/N 5ZW1-UP Model CR50 145-4799 Spacer (1.5 mm thick) 1
Part of 145-5772 Crusher AR — Hydraulic 145-4800 Spacer (2 mm thick) 1
Part Number Description Quantity 145-4801 Plate 2
157-0949 Screw – flat head 12
7X2555 Bolt (M1632.00380 mm) 4
8T4131 Nut (M2032.50 thread) 12
8T4132 Nut (M1632.00 thread) 4
9X8257 Washer (3.50 mm thick) 4
144-2715 Screw – flat head 12
145-3584 Tooth – crushing 4
145-4078 Lockwasher 12
165-1501 Cutter 4
145-5778 Spacer 1
145-5779 Spacer 1
145-5780 Spacer 1
145-5781 Spacer 1
145-5782 Plate 2
243
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — CRUSHERS
Recommended Parts List — 145-4010 Tooth & Cutting Edge Group Recommended Parts List — 154-8953 Tooth & Cutting Edge Group
S/N 4JW1-UP Model CR28 S/N 6EZ1-UP Model CR3
Part of 145-4006 Crusher AR — Hydraulic Part of 159-3113 Crusher AR — Hydraulic
Part Number Description Quantity Part Number Description Quantity
157-0949 Screw – flat head 8 155-5755 Edge – cutting 2
7X2554 Bolt (M1632.00370 mm) 4 156-9854 Shim 4
8T4132 Nut (M1632.00 thread) 12 156-9855 Shim 2
9X8257 Washer (3.50 mm thick) 4 156-9856 Shim 2
159-1121 Lockwasher 8 159-1118 Lockwasher 4
144-2531 Bolt 8 159-3048 Screw – flat head 4
165-1499 Cutter 4 8T4133 Nut (M1031.50 thread) 4
145-0738 Spacer (0.5 mm thick) 1
145-0739 Spacer (1 mm thick) 1
145-0737 Spacer (0.3 mm thick) 2
145-3763 Tooth – crushing 4
145-0740 Plate 2
244
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 169-6033 Cutting Edge Group Recommended Parts List — 169-6031 Cutting Edge Group
S/N ABR1-UP Model MP15 S/N ABR1-UP Model MP15
Part of 179-6771 Jaw Group — Shear Part of 179-6764 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 4 169-0385 Edge – cutting 2
169-0386 Shim (1 mm) 12 169-0386 Shim (1 mm) 4
169-0388 Shim (1.5 mm) 4 169-0388 Shim (1.5 mm) 2
145-4075 Bolt 12 169-6065 Screw – flat head 6
145-2715 Screw – flat head 2 8T4131 Nut (M2032.50 thread) 6
8T4131 Nut (M2032.50 thread) 14 8T4123 Washer – plated (3.5 mm thick) 6
8T4123 Washer – plated (3.5 mm thick) 14
169-6071 Edge – cutting 1
169-6072 Shim (1 mm) 5
169-6073 Shim (1.5 mm) 1
169-6076 Retainer 8
169-6074 Shim (0.5 mm) 8
169-6075 Shim (1 mm) 10
245
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 169-0370 Cutting Edge Group Recommended Parts List — 169-6039 Crusher Tooth Group
S/N ABR1-UP Model MP15 S/N ABR1-UP Model MP15
Part of 179-6756 Jaw Group — Crusher Part of 179-6764 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 2 169-0383 Tooth 9
169-0386 Shim (1 mm) 4 7X2454 Bolt (M2433.003110 mm) 9
169-0388 Shim (1.5 mm) 2 8T4001 Nut (M2433.00 thread) 9
169-6065 Screw – flat head 6 159-1122 Lockwasher 9
8T4131 Nut (M2032.50 thread) 6 169-6069 Tooth Assembly – ripper 1
8T4123 Washer – plated (3.5 mm thick) 6 169-6070 Bolt – socket head 1
Recommended Parts List — 169-6040 Crusher Tooth Group Recommended Parts List — 169-6038 Crusher Tooth Group
S/N ABR1-UP Model MP15 S/N ABR1-UP Model MP15
Part of 179-6767 Jaw Group — Pulverizer Part of 179-6760 Jaw Group — Combination
Part Number Description Quantity Part Number Description Quantity
169-0383 Tooth 2 169-0383 Tooth 3
7X2454 Bolt (M2433.003110 mm) 2 7X2454 Bolt (M2433.003110 mm) 3
8T4001 Nut (M2433.00 thread) 2 8T4001 Nut (M2433.00 thread) 3
159-1122 Lockwasher 2 159-1122 Lockwasher 3
169-6069 Tooth Assembly – ripper 1
169-6070 Bolt – socket head 1
246
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 169-0369 Crusher Tooth Group Recommended Parts List — 169-6036 Cutting Edge Group
S/N ABR1-UP Model MP15 S/N ACF1-UP Model MP20
Part of 179-6756 Jaw Group — Crusher Part of 179-6768 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
169-0383 Tooth 6 169-0385 Edge – cutting 2
7X2454 Bolt (M2433.003110 mm) 6 169-0386 Shim (1 mm) 4
8T4001 Nut (M2433.00 thread) 6 169-0388 Shim (1.5 mm) 2
159-1122 Lockwasher 6 169-6065 Screw – flat head 6
8T4131 Nut (M2032.50 thread) 6
8T4123 Washer – plated (3.5 mm thick) 6
247
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 169-6034 Cutting Edge Group Recommended Parts List — 169-7107 Crusher Tooth Group
S/N ACF1-UP Model MP20 S/N ACF1-UP Model MP20
Part of 179-6761 Jaw Group — Combination Part of 179-6757 Jaw Group — Crusher
Part Number Description Quantity Part Number Description Quantity
169-7117 Edge – cutting 2 169-0389 Tooth 6
169-7118 Shim (1 mm) 6 8T0363 Bolt (M2433.003120 mm) 6
169-7119 Shim (1.5 mm) 2 8T4001 Nut (M2433.00 thread) 6
169-0385 Edge – cutting 2 159-1122 Lockwasher 6
169-0386 Shim (1 mm) 6
169-0388 Shim (1.5 mm) 2 Recommended Parts List — 169-6043 Crusher Tooth Group
170-3524 Screw – flat head 12 S/N ACF1-UP Model MP20
8T4131 Nut (M2032.50 thread) 12 Part of 179-6768 Jaw Group — Pulverizer
8T4123 Washer – plated (3.5 mm thick) 14 Part Number Description Quantity
169-6066 Edge – cutting 1 165-6050 Lock Group – pin 1
169-6072 Shim (1 mm) 5
169-6073 Shim (1.5 mm) 1
7Y5241 Bolt – Socket head 2
(M2032.50360 mm)
248
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
249
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 172-5900 Cutting Edge Group Recommended Parts List — 172-2213 Cutting Edge Group
S/N ALE1-UP Model MP30 S/N ALE1-UP Model MP30
Part of 179-6766 Jaw Group — Pulverizer Part of 179-6762 Jaw Group — Combination
Part Number Description Quantity Part Number Description Quantity
172-5931 Edge – cutting 2 169-7117 Edge – cutting 4
172-5933 Shim – plate (1 mm) 2 169-7118 Shim (1 mm) 12
172-5932 Shim – plate (1.5 mm) 6 169-7119 Shim (1.5 mm) 4
170-3524 Screw – flat head 3 169-0385 Edge – cutting 1
169-6065 Screw – flat head 3 169-0386 Shim (1 mm) 5
8T4131 Nut (M2032.50 thread) 6 169-0388 Shim (1.5 mm) 1
8T4123 Washer – plated (3.5 mm thick) 6 170-3524 Screw – flat head 6
144-2715 Screw – flat head 9
8T4131 Nut (M2032.50 thread) 15
8T4123 Washer – plated (3.5 mm thick) 15
250
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 172-5899 Crusher Tooth Group Recommended Parts List — 172-2208 Crusher Tooth Group
S/N ALE1-UP Model MP30 S/N ALE1-UP Model MP30
Part of 179-6766 Jaw Group — Pulverizer Part of 179-6762 Jaw Group — Combination
Part Number Description Quantity Part Number Description Quantity
169-3089 Tooth 11 169-3089 Tooth 3
8T0363 Bolt (M2433.003120 mm) 11 8T0363 Bolt (M2433.003120 mm) 3
8T4001 Nut (M2433.00 thread) 11 8T4001 Nut (M2433.00 thread) 3
159-1122 Lockwasher 11 159-1122 Lockwasher 3
169-6069 Tooth Assembly – ripper 1
169-6070 Bolt – socket head 1 Recommended Parts List — 172-1225 Cutting Edge Group
S/N AMB1-UP Model MP40
Part of 179-6774 Jaw Group — Shear
Part Number Description Quantity
172-1227 Edge – cutting 2
172-1229 Shim – plate (1 mm) 6
172-1208 Shim – plate (1.5 mm) 2
172-1213 Edge – cutting 2
172-1226 Shim – plate (1 mm) 6
172-1228 Shim – plate (1.5 mm) 2
173-2434 Edge – cutting 1
173-2435 Shim – plate (1 mm) 3
173-2436 Shim – plate (1.5 mm) 1
Recommended Parts List — 172-5893 Crusher Tooth Group
144-2715 Screw – flat head 7
S/N ALE1-UP Model MP30
Part of 179-6758 Jaw Group — Combination 144-5481 Screw – flat head 7
175-0335 Screw – flat head 3
Part Number Description Quantity
8T4131 Nut (M2032.50 thread) 17
169-3089 Tooth 6
8T4123 Washer – plated (3.5 mm thick) 17
8T0363 Bolt (M2433.003120 mm) 6
169-6074 Shim (0.5 mm) 10
8T4001 Nut (M2433.00 thread) 6
169-6075 Shim (1 mm) 13
159-1122 Lockwasher 6
169-6076 Retainer 10
251
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MULTI-PROCESSORS
Recommended Parts List — 173-1679 Cutting Edge Group Recommended Parts List — 173-1675 Crusher Tooth Group
S/N AMB1-UP Model MP40 S/N AMB1-UP Model MP40
Part of 179-6759 Jaw Group — Combination Part of 179-6770 Jaw Group — Pulverizer
Part Number Description Quantity Part Number Description Quantity
172-5931 Edge – cutting 2 169-4642 Tooth 4
172-5933 Shim – plate (1 mm) 6 7X2584 Bolt (M3033.503140 mm) 4
172-5932 Shim – plate (1.5 mm) 2 8C8722 Nut (M3033.50 thread) 4
144-2698 Screw – flat head 3 169-3177 Lockwasher 4
144-3087 Screw – flat head 3 173-1692 Tooth Assembly – ripper 1
8T4131 Nut (M2032.50 thread) 6 174-6481 Bolt – socket head 2
8T4123 Washer – plated (3.5 mm thick) 6
252
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DEMOLITION TOOLS — MECHANICAL SCRAP SHEARS
Recommended Parts List — Model S115 Recommended Parts List — Model S115
S/N ADY00001-UP S/N AFF00001-UP
Part Number Description Quantity Part Number Description Quantity
169-0385 Edge – cutting 4 169-7117 Edge – cutting 4
169-6071 Edge – cutting 1 169-0385 Edge – cutting 1
169-0386 Shim – plate (1 mm) 8 169-7118 Shim – plate (1 mm) 8
169-0388 Shim – plate (1.5 mm) 4 169-7119 Shim – plate (1.5 mm) 4
169-6072 Shim – plate (1 mm) 2 169-0386 Shim – plate (1 mm) 2
169-6073 Shim – plate (1.5 mm) 2 169-0388 Shim – plate (1.5 mm) 2
169-6076 Bushing – lock 8 169-6076 Bushing – lock 9
169-6074 Shim – ring (1 mm) 8 169-6074 Shim – ring (1 mm) 9
169-6075 Shim – ring (1.5 mm) 8 169-6075 Shim – ring (1.5 mm) 9
145-4075 Bolt 6 144-2698 Bolt 6
169-7190 Bolt 6 169-7190 Bolt 6
144-3087 Bolt 2 144-3087 Bolt 3
8T4131 Nut 14 8T4131 Nut 15
8T4123 Washer 14 8T4123 Washer 15
MULTI-PROCESSOR
MATCHING GUIDE
Stick Mounted/Reach Boom
Multi-Processors Cat Stick Range
Model Excavator meters feet Interchangeable Jaw Type
MP15 320B 1.9-3.9 m 6'3"-12'10" Concrete Cutter Jaw (CC)
322B 3.6 m 11'10" Shear Jaw (S)
Crusher Jaw (CR)
Primary Pulverizer Jaw (PP)
Secondary Pulverizer Jaw (PS)
MP20 322B 2.5-2.95 m 8'2"-9'8" Concrete Cutter Jaw (CC)
325B 2.7-3.2 m 8'10"-10'6" Shear Jaw (S)
330B 3.3-3.9 m 10'10"-12'10" Crusher Jaw (CR)
Primary Pulverizer Jaw (PP)
Secondary Pulverizer Jaw (PS)
Tank Shear Jaw (TS)
Notes:
Matching guide for all Multi-Processor and Jaw configurations.
Tank Shear Jaws are not available for MP15.
253
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
DRILL TOOLS
Caterpillar drill bits, couplings, shank adapters and drill As other high demand bits, steel and couplings are
steel are now available for John Henry and similar identified; they will be added to Caterpillar’s inventory.
percussive drills. Part numbers and descriptions,
according to drill string size, are shown on the following An eleven minute video, media number PEVN4183,
pages.* helpful in training dealer personnel and useful in
introducing customers to the products, is available.
Included are shank adapters for other drills, including
Ingersoll Rand, Atlas Copco, Tamrock, Montabert, Cat bits, steel, couplings and shank adapters are covered
Gardner Denver, Joy and Furukawa. Using these shank by the Cat GET warranty against breakage.
adapters allows Cat bits, steel and couplings to be used
on these brands of drills as well. * Only available for NACD and CACo.
Coupling
Shank Adapter • Designed for the most secure connection
• High alloy steel to withstand to drill steel
repeated impact • Tempered for increased toughness
• Carburized for longer wear life • Available in 38 mm, 45 mm and 51 mm
• Consistent quality thread sizes
254
38 mm DRILL TOOLS
Button Bits Rods Shank Adapters Couplings
Part Number Inches mm Type Part Number Feet Meters Type Part Number Brand Design Part Number Type
144-1440 2.5 64 Flat Face 144-1445 10 3.05 Single Male End 144-1448 John Henry Male EF 710 mm 144-1446 Standard
144-1450 2.5 64 Drop Center 144-1444 12 3.66 Single Male End 144-1449 John Henry Female EF 540 mm
144-1460 2.5 64 Retrac 144-1453 14 4.23 Single Male End 144-1458 Gardner Denver PR66 16 mm-711 mm
144-1441 3.0 76 Flat Face 144-1443 10 3.05 Tandem Male End 144-1468 Gardner Denver HPR1 45 mm-597 mm
144-1451 3.0 76 Drop Center 144-1454 12 3.66 Tandem Male End 144-1469 Gardner Denver PR123/Secan
14 mm-600 mm
144-1461 3.0 76 Retrac 144-1455 10 3.05 Male/Female End 144-1447 Gardner Denver HPR1H 725 mm
144-1442 3.5 89 Flat Face 144-1463 12 3.66 Male/Female End 144-1459 Joy JH2/Cannon 455 mm
144-1452 3.5 89 Drop Center 144-1457 Ingersoll Rand YH65 19 mm-500 mm
144-1462 3.5 89 Retrac 144-1467 Atlas Copco 1238ME 575 mm
144-1508 Furukawa HD609 620 mm
144-1437 Tamrock HL 600 Male EF 600 mm
144-1428 Ingersoll Rand YH65 Reedrill
45 mm DRILL TOOLS
Button Bits Rods Shank Adapters Couplings
Part Number Inches mm Type Part Number Feet Meters Type Part Number Brand Design Part Number Type
144-1470 3.0 76 Flat Face 144-1483 10 3.05 Single Male End 144-1478 John Henry Male EF 710 mm 144-1476 Standard
144-1480 3.0 76 Drop Center 144-1473 12 3.66 Single Male End 144-1479 John Henry Female EF 540 mm
144-1491 3.0 76 Retrac 144-1474 14 4.27 Single Male End 144-1488 Atlas Copco 1238ME EF 590 mm
149-5772 3.0 76 Parabolic 144-1475 20 6.10 Single Male End 144-1489 Gardner Denver HPR1H EF 725 mm
144-1471 3.5 89 Flat Face 144-1484 10 3.05 Tandem Male End 144-1498 Gardner Denver HPR1 EF 597 mm
144-1481 3.5 89 Drop Center 144-1485 12 3.66 Tandem Male End 144-1499 Gardner Denver PR66 16 mm-711 mm
144-1492 3.5 89 Retrac 144-1493 10 3.05 Male/Female End 144-1477 Ingersoll Rand VL671 14 mm-533 mm
149-5780 3.5 89 Parabolic 144-1494 12 3.66 Male/Female End 144-1487 Ingersoll Rand VL671 19 mm-533 mm
144-1472 4.0 102 Flat Face 140-6792 16 4.90 Single Male End 144-1497 Ingersoll Rand YH65 19 mm-500 mm
144-1482 4.0 102 Drop Center 144-1509 Montabert HC120R 51 mm-667 mm
149-5770 4.0 102 Retrac 144-1418 Tamrock HL600 Male EF 600 mm
149-5781 4.0 102 Parabolic 144-1518 Tamrock HL1000 EF 51 mm-670 mm
144-1490 4.5 114 Flat Face 144-1509 Furukawa HD609 EF 45 mm-620 mm
149-5771 4.5 114 Retrac 144-1547 Furukawa HD612 EF 51 mm-670 mm
149-5782 4.5 114 Parabolic 144-1417 Furukawa HD615 EF 58 mm-705 mm
144-1437 Tamrock HL600 Male EF 600 mm
255
DRILL TOOLS
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
51 mm DRILL TOOLS
256
Button Bits Rods Shank Adapters Couplings
Part Number Inches mm Type Part Number Feet Meters Type Part Number Brand Design Part Number Type
144-1500 3.5 89 Flat Face 143-3071 24 7.31 Male/Female End 144-1528 John Henry Male EF 710 mm 144-1506 Standard
144-1502 3.5 89 Drop Center 144-1503 12 3.66 Single Male End 144-1538 Ingersoll Rand YH95 25 mm-625 mm
DRILL TOOLS
149-5730 3.5 89 Retrac 144-1504 20 6.10 Single Male End 144-1539 Ingersoll Rand YH95H 25 mm-840 mm
152-0030 3.5 89 Parabolic 144-1505 12 3.66 Male/Female End 144-1548 Ingersoll Rand YH110 EF 900 mm
144-1501 4.0 102 Flat Face 144-1324 Ingersoll Rand YH110 EF 725 mm
144-1510 4.0 102 Drop Center 144-1549 Montabert HC120R EF 667 mm
149-5731 4.0 102 Retrac 144-1507 Tamrock HL1000 TF 670 mm
152-0031 4.0 102 Parabolic 144-1517 Tamrock HL850 EF 670 mm
144-1512 4.5 114 Flat Face 144-1527 Furukawa HD615 EF 58 mm-705 mm
144-1511 4.5 114 Drop Center 144-1537 Furukawa HD615 EF 880 mm
149-5732 4.5 114 Retrac
152-0032 4.5 114 Parabolic
144-1520 5.0 127 Flat Face
144-1521 5.0 127 Drop Center
149-5801 5.0 127 Retrac
149-5802 5.0 127 Parabolic
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
ÅCROSS REFERENCE
BLA CAT Brunner Ingersoll
PART # PART # & Lay Secoroc Sandvik Furukawa Rand Rockmore Diabit Saxum Description
110022 1441440 S2538FO 135-5064-20 7514-2664-S48 DT38BB65FR 51237675 38MP64R1 116-620 BIT BUTTON 64MM (2-1/2") HM38 BF6/3
110205 1441441 S3038FO 135-5076 7514-2676-S48 DT38BB76FR 51237642 38MP76R1 116-624 BIT BUTTON 76MM (3.0") HM38 BF7/5
110217 1441442 S3538FO 135-5089 7514-3889-S48 DT38BB90FR 51293926 T38-89BF 38MP89R1 116-626 BIT BUTTON 89MM (3-1/2") HM38 BF7/5
110197 1441450 S2538DO 135-6064 DT38BB65DR 51362051 T38-64BDC 38MP64R5 BIT BUTTON 64MM (2-1/2") HM38 BR5/4
110215 1441451 S3038DO 135-6067 DT38BB76DR 51236271 T38-76BDC 38MP76R5 BIT BUTTON 76MM (3.0") HM38 BR6/5
110220 1441452 S3538DO DT38BB90DR 51236289 T38-89BDC 38MP89R5 BIT BUTTON 89MM (3-1/2") HM38 BR6/5
110206 1441470 S3045FO 136-5076 7515-2676-S48 DT45BB76FR 51238053 45MP76R1 116-724 BIT BUTTON 76MM (3.0") HM45 BF7/5
110040 1441471 S3545FO 136-5089 7515-3889-S48 DT45BB90FR 51250678 T45-89BF 45MP89R1 116-726 BIT BUTTON 89MM (3-1/2") HM45 BF7/5
110509 1441472 S4045FO 136-5102 7515-2602-B48 DT45BB102FR 51292837 T45-102BF 45MP102R1 BIT BUTTON 102MM (4.0") HM45 BF9/7
110216 1441480 S3045DO 136-6076 DT45BB76DR 51236248 T45-76BDC 45MP76R5 BIT BUTTON 76MM (3.0") HM45 BR6/5
110221 1441481 S3545DO 136-6089 DT45BB90DR 51236255 T45-89BDC 45MP89R5 BIT BUTTON 89MM (3-1/2") HM45 BR6/5
110533 1441482 S4045DO 136-6102 DT45BB102DR 51236263 T45-102BDC 45MP102R5 BIT BUTTON 102MM (4.0") HM45 BR9/8
110512 1441490 S4545FO 7516-2615-B48 DT45BB115FR 51202563 T45-115BF 45MP115R5 BIT BUTTON 115MM (4-1/2") HM45 BF9/8
110259 1441500 S3551FO 137-5089 7516-2689-S48 DT51BB90FR 51302255 T51-89BF 51MP89R1 BIT BUTTON 89MM (3-1/2") HM51 BF7/5
110508 1441501 S4051FO 137-5102 7516-2602-S48 DT51BB102FR 51297935 T51-102BF 51MP102R1 BIT BUTTON 102MM (4.0") HM51 BF9/7
110395 1441502 S3551DO 137-6089 DT51BB90DR 51361152 T51-89BDC 51MP89R5 BIT BUTTON 89MM (3-1/2") HM51BR6/5
110532 1441510 S4051DO 137-6102 DT51BB102DR 51294569 T51-102BDC 51MP102R5 BIT BUTTON 102MM (4.0") HM51BR9/8
110535 1441511 S4551DO 137-6115 DT51BB115DR 51361160 T51-115BDC 51MP115R5 BIT BUTTON 115MM (4-1/2") HM51 BR9/9
110510 1441512 S4511FO 137-5115 7516-2615-S48 DT51BB115FR 51297943 T51-115BF 51MP115R1 BIT BUTTON 115MM (4-1/2") HM51 BF9/8
110513 1441520 S5051FO 137-5127 7516-2617-S48 DT51BB127FR 51297950 T51-127BF 51MP127R1 BIT BUTTON 127MM (5.0") HM51 BF9/9
110536 1441521 S5051DO 137-6127 DT51BB127DR 51361178 T51-127BDC 51MP127R5 BIT BUTTON 127MM (5.0") HM51 BR9/9
200393 1441443 H5120SS 235-2731-95-SH TE38RB10 ER38M38T-3050 ROD EXT H/F 3.05M (10'0") HM38T
RD39 HM38T
200366 1441444 H5144RR 235-2737-SH 7324-4337-30 DT38RE236 SE38RB12 T38R-3660 ER38M38-3660 ROD EXT H/F 3.66M (12'0") HM38
RD39 HM38
200365 1441445 H5120RR 235-2731-SH 7324-4331-30 DT38RE231 SE38RB10 T38R-3050 ER38M38-3050 ROD EXT H/F 3.05M (10'0") HM38
RD39 HM38
200367 1441453 H5168RR SE38RB14 ER38M38-4270 ROD EXT H/F 4.27M (14'0") HM38
RD39 HM38
200407 1441454 H5144SS TE38RB12 ER38M38T-3660 ROD EXT H/F 3.66M (12'0") HM38T
RD39 HM38T
210032 1441455 J5124RQF 235-2731-SH 7324-4731-20 T3838MF-3050 EH38M38MF-3050 ROD EXT M/F 3.05M (10'0") HM38
RD39 HM38
257
ROCK DRILL TOOLS
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
ÅCROSS REFERENCE — Continued
258
BLA CAT Brunner Ingersoll
PART # PART # & Lay Secoroc Sandvik Furukawa Rand Rockmore Diabit Saxum Description
210046 1441463 J5148RQF 235-2737-MF-C 7324-4737-20 T3838MF-3660 EH38M38MF-3660 ROD EXT M/F 3.66M (12'0") HM38 RD39
HM38
200362 1441473 H6144TT 236-2937-SH 7325-7337-30 DT45RE236 SE45RB12A T45R-3660 ER45M45-3660 ROD EXT H/F 3.66M (12'0") HM45 RD46
HM45
200386 1441474 H6168TT 7325-7343-30 SE45RB14 ER45M45-4270 ROD EXT H/F 4.27M (14'0") HM45 RD46
ROCK DRILL TOOLS
HM45
200397 1441475 H6240TT 236-2961-SH 7325-7361-30 T45R-6095 ROD EXT H/F 6.10M (20'0") HM45 RD46
HM45
200361 1441483 H6120TT 236-2931-SH 7325-7331-30 DT45RE230 SE45RB10A T45R-3050 ER45M45-3050 ROD EXT H/F 3.05M (10'0") HM45 RD46
HM45
200405 1441484 H6120YY TE45RB10A ER45M45T-3050 ROD EXT H/F 3.05M (10'0") HM45T RD46
HM45T
200406 1441485 H6144YY TE45RB12A ER45M45T-3660 ROD EXT H/F 3.66M (12'0") HM45T RD46
HM45T
210037 1441493 J6124T2F 236-2931-MF-C 7325-7731-20 T4545MF-3050 ER45M45MF-3050 ROD EXT M/F 3.05M (10'0") HM45 RD46
HM45
210038 1441494 J6148T2F 236-2937-SH 7325-7737-20 T4545MF-3660 ER45M45-3660 ROD EXT M/F 3.66M (12'0") HM45 RD46
HM45
200363 1441503 H7144ZZ 237-3137-SH 7326-5337-30 DT51RE236 51297844 T51R-3660 ER51M51-3660 ROD EXT H/F 3.66M (12'0") HM51 RD52
HM51
200364 1441504 H7240ZZ 237-3161-SH DT51RE260 51358646 T51R-6095 ROD EXT H/F 6.10M (20'0") HM51 RD52
HM51
210042 1441505 J7148Z3F 237-3137-MF-C 7326-5537-20 T5151MF-6095 ER51M51MF-3660 ROD EXT M/F 3.66M (12'0") HM51 RD52
HM51
350002 1441446 CCT3800 335-0055 7314-3355 DT38RE301 C38SBB3 CT38-55 CM38 600-602 COUPLING HM38
350012 1441476 CCT4500 336-0063 7315-3663 DT45RE302 C45SBB3 CT45-63 CM45 600-702 COUPLING HM45
350014 1441506 CCT5100 337-0072 7366-3671 DT51RE302 C51SB CT51-72 CM51 COUPLING HM51
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
ÅCROSS REFERENCE — Continued
BLA CAT Brunner Ingersoll
PART # PART # & Lay Secoroc Sandvik Furukawa Rand Rockmore Diabit Saxum Description
450542 1441417 DT45RE167 SHANK FURUKAWA HD615 HM45 EF 58MM-705MM
450389 1441447 P35X380 T3823SF-001 SHANK GD HPR1H HM38 EF 725MM
450557 1441448 P54X380 SHANK JOHN HENRY JHRD1 HM38 EF 64MM-710MM
450558 1441449 P54X380F SHANK JOHN HENRY JHRD1 HM38 (F)EF
64MM-540MM
450460 1441457 P84N380 51127637 SHANK ING.RAND YH65 HM38 19MM-500MM
450269 1441458 P70L38T 435-5961 T382516-002 SHANK GD PR66 HM38 16MM-711MM
450276 1441459 P26X380 SHANK JOY/CANNON JH2 HM38 EF 455MM
450479 1441467 435-3002 7304-3550-1 T3835SF-006 S80M38SFB SHANK ATLAS COPCO 1238ME HM38 EF 575MM
450326 1441468 P25X380 T382214-001 SHANK GD HPR1 HM38 EF 45MM-597MM
450372 1441469 T381911-001 SHANK SECAN S36IR HM38 14MM-600MM
450302 1441477 P66N450 7305-6505-60 51378560 T451214-001 S79M45AA SHANK ING.RAND VL671 HM45 14MM-533MM
450559 1441478 P54X450 SHANK JOHN HENRY JHRD1 HM45 EF 64MM-710MM
450507 1441479 P54X450F SHANK JOHN HENRY HB101/JHRD2 HM45(F) EF 540
450490 1441487 P66N450 51378578 SHANK ING.RAND VL671 HM45 19MM-533MM
450422 1441488 436-03003 T4535SF-006 522-792 SHANK ATLAS COPCO 1238ME HM45 EF 590MM
450391 1441489 P35X450 7305-4883-1 T4523SF-001 S112M45SFA SHANK GD HPR1H HM45 EF 725MM
450375 1441497 P84N450 436-10791 7305-7525-19 51235695 T451419-001 S63M45AC SHANK ING.RAND YH65 HM45 19MM-500MM
450483 1441498 P25X450 T452214-002 SHANK GD HPR1 HM45 EF 597MM
450294 1441499 P70L45T 51026516 T452516-002 SHANK GD PR66 HM45 16MM-711MM
450111 1441507 P95X510 437-8902-20 7306-6010-1 T5156SF-001 S13M51SFB SHANK TAMROCK HL1000 HM51 EF 670MM
450487 1441508 P0000777 7304-4791-1 DT38RE163 SHANK FURUKAWA HD609 HM38 EF(45MM) 620MM
450426 1441509 T4592SF-001 S70M45SFA SHANK MONTABERT HC120R HM45 EF(51MM)-667MM
450305 1441517 P92X510 437-4402 7306-7400-1 51380137 S60M51SFB SHANK TAMROCK HL850 HM51 EF 670MM
450380 1441518 P95X450 436-8902-20 T4556SF-001 SHANK TAMROCK HL1000 HM45 EF(52MM)-670MM
450525 1441519 7305-4791-01 DT45RE163 SHANK FURUKAWA HD609 HM45 EF(45MM) 620MM
450515 1441527 DT51RE167 S123M51SFAG SHANK FURUKAWA HD615 HM51 EF (58MM)-705MM
450506 1441528 P54X510 SHANK JOHN HENRY HB101/JHRD1 HM51 EF 710MM
450560 1441529 SHANK HM51(F)
450562 1441537 DT51615QED SHANK FURUKAWA HD615 HM51 EF 880MM
450398 1441538 7306-4995-23 51312833 T511623-001 SHANK ING.RAND YH95 HM51 25MM-625MM
450399 1441539 7306-4996-23 SHANK ING.RAND YH95RH HM51 25MM-840MM
450486 1441547 DT45RE165 SHANK FURUKAWA HD612 HM45 EF(51MM) 670MM
450527 1441548 SHANK ING.RAND YH110 HM51 EF 900MM
259
ROCK DRILL TOOLS
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
450491 1441549 437-11501 7306-7528-1 S70M51SFA SHANK MONTABERT HC120R HM51 EF 667MM
Hydraulic Hammer Tools / Demolition Tools / Rock Drill Tools
NOTES
260
Loaders
263
Loaders
Tips
Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .426
Bucket Tip Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .428
Tips for Competitive Adapters
Series 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .429
Wear Material Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .430
Inspecting Bucket GET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .431
Bucket Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .435
Base Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .436
Base Edge Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .437
Bolt-On Cutting Edge Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .446
End Bit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455
Half-Arrow
Bolt-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .461
Weld-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .461
Conversion Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .462
Corner Guard System
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .466
Conversion Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .468
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .484
GP, MP (Non CGS) Buckets and Rock Buckets
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .485
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .486
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .495
Straight Base Edges without Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .496
Rock Buckets (Spade)
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .502
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .503
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .504
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .514
MAA System
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .515
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .517
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .518
MODULOK
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .521
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .524
Heavy Duty Mining System
Selection & Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .525
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .525
Backhoe Loader
Conversion Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .526
Base Edge Dimensions and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . .526
Front Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .526
Rear Buckets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .526
264
Loaders
994
ROCK BUCKETS
Model 994, 994D 994, 994D 994, 994D 994, 994D
Bucket Assembly 8X1491 102-2598 113-4105 121-2360
8X0807 102-2606 113-4106 121-2361
8X1497 102-0673 113-4103 144-2844
102-0676 111-7973
102-2124 111-7974
102-9319 113-4104
102-9326 113-4107
113-4108
Edge Type Spade Spade Spade Spade
Width — inches 222 222 222 222
mm 5640 5640 5640 5640
Base Edge Assembly 8X0808** 101-5857** 110-2340** 121-2104
Base Edge 8X0809** 101-5868** 110-2339**
Corners (R/L) 8X0813/6 101-9373/4 101-9373/4 121-2364/7
Sidebar (RH)
(LH)
Adapters
Center (3) 4T4704 (8) 6I8804 (8) 6I8804 (8) 6I8804
RH (3) 4T4705
LH (3) 4T4706
Tips J700 J800 J800 J800
Long 4T4702
Abrasion 4T4703
Penetration 4T4709 117-6809 117-6809 117-6809
Heavy Duty Penetration 135-9700 135-9800 135-9800 135-9800
Heavy Duty Long 9U9702 6I8802 6I8802 6I8802
Heavy Duty Long Life (ARM) 107-2001 117-6802 117-6802 117-6802
Heavy Duty Abrasion 9U9703 6I8803 6I8803 6I8803
Heavy Duty Pin 113-4708 134-1808 134-1808 134-1808
Heavy Duty Retainer Assembly 113-4709 134-1809 134-1809 134-1809
Rear Wear Plates
60 mm (2) 8E3160 (2) 100-4015*** (2) 100-4015*** (2) 100-4015***
75 mm (2) 100-4015***
Bolts (8) 6V8360 (8) 6V8360 (8) 6V8360 (8) 6V8360
Nuts (8) 3K9770 (8) 3K9770 (8) 3K9770 (8) 3K9770
Washers (8) 4K0684 (8) 4K0684 (8) 4K0684 (8) 4K0684
Bolt-On Segments
Center (2) 8E3157* (3) 103-1833 107-3383 107-3383
RH (3) 8E3158* (2) 103-1834 (3) 103-1834 (3) 103-1834
LH (3) 8E3159* (2) 103-1835 (3) 103-1835 (3) 103-1835
Bolts (40) 6V8360 (35) 5P8823 (35) 5P8823 (35) 5P8823
Nuts (40) 3K9770 (35) 3K9770 (35) 3K9770 (35) 3K9770
Half Arrow Segments
Center (3) 109-9030 109-9033 109-9033
RH (2) 109-9031 (3) 109-9031 (3) 117-6805
LH (2) 109-9032 (3) 109-9032 (3) 117-6806
Base Edge Wear Plate
Center (3) 103-1833 (3) 107-3383 (5) 107-3383
RH
LH
Bolts (9) 5P8823 (9) 5P8823 (15) 5P8823
Nuts (9) 3K9770 (9) 3K9770 (15) 3K9770
Sidebar Protector (2) 125-0800 (2) 125-0800 (2) 125-0800 (2) 125-0800
Pin (4) 8E4708 (4) 8E4708 (4) 8E4708 (4) 8E4708
Retainer (4) 4T4707 (4) 4T4707 (4) 4T4707 (4) 4T4707
Rear Weld-On Wear Plate (4) 2A6724 (4) 2A6724 (4) 2A6724 (4) 2A6724
Optional Wing (High Profile)
Bolt-On Edges (4) 4T6593 (4) 4T6593 (4) 4T6593 (4) 4T6593
Bolt-On Bolts (16) 4F4042 (16) 4F4042 (16) 4F4042 (16) 4F4042
Bolt-On Nuts (16) 8J3507 (16) 8J3507 (16) 8J3507 (16) 8J3507
Bolt-On Washers (16) 5P8250 (16) 5P8250 (16) 5P8250 (16) 5P8250
* These segments are 60 mm thick. Others are 75 mm.
** Edge Assembly Replacement — For optimum performance and value for customers, upgrade earlier style base edges at change time to the 121-2104 edge assembly.
Former edge styles will be discontinued when demand ceases.
*** Wear plate 132-4714. Hex bolt version.
Bolt — Hex
NOTE: See Wear Protection Section for Mechanically Attached Wear Plate options.
265
Loaders
994
266
Loaders
994
MAA SYSTEM
267
Loaders
994
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 994 994 994
Bucket Assembly 102-0672 117-7693 102-0632
102-2597 117-7694 102-0639
102-2605 117-7695 102-2505
102-0663 117-7696 102-2592
102-0675 117-7697 102-0640
102-2123 117-7698 102-0648
MODULOK Edge Type Spade Spade Spade
Bucket Width — inches 222 222 245
mm 5640 5640 6220
Base Edge Assembly — 4" (100 mm) 101-8963 117-7692 101-8965
Adapter (8) 101-1808 (8) 101-1808 (9) 101-1808
Bucket Corners RH/LH 102-9716/7 102-9716/7 102-9716/7
Wear Plate — 2.36" (60 mm)
End (2) 104-2001 (2) 104-2001 (2) 104-2001
Center (4) 9W4493 (4) 9W4493 (3) 9W4493
Intermediate (2) 6Y0022
Bolts (30) 5P8823** (30) 5P8823** (33) 5P8823**
Nuts (30) 3K9770 (30) 3K9770 (33) 3K9770
Washers (30) 4K0684 (30) 4K0684 (33) 4K0684
Edge Cover
Center (3) 128-5928 128-5929 128-5929
RH (2) 128-5926 (3) 128-5926 (3) 128-5926
LH (2) 128-5927 (3) 128-5927 (3) 128-5927
Adapter Cover (8) 117-6801 (8) 117-6801* (9) 117-6801
Pin (8) 125-0808 (8) 125-0808 (9) 125-0808
Retainer Assembly (8) 125-0809 (8) 125-0809 (9) 125-0809
Heavy Duty Long Tip (8) 6I8802 (8) 6I8802 (9) 6I8802
Heavy Duty Pin (8) 134-1808 (8) 134-1808 (9) 134-1808
Heavy Duty Retainer Assembly (8) 134-1809 (8) 134-1809 (9) 134-1809
Sidebar Protector (2) 125-0800 (2) 125-0800 (2) 125-0800
Pin (Headed) (4) 8E4708 (4) 8E4708 (4) 8E4708
Retainer (4) 4T4707 (4) 4T4707 (4) 4T4707
Bolt-On Wear Plates — 3" (75 mm) (2) 100-4015 (2) 100-4015 (2) 100-4015
Bolts (8) 6V8360 (8) 6V8360 (8) 6V8360
Nuts (8) 3K9770 (8) 3K9770 (8) 3K9770
Washers (8) 4K0684 (8) 4K0684 (8) 4K0684
Optional Replacements
Penetration Tip (8) 117-6809 (8) 117-6809 (9) 117-6809
Heavy Duty Penetration Tip (8) 135-9800 (8) 135-9800 (9) 135-9800
Heavy Duty Abrasion Tip (8) 6I8803 (8) 6I8803 (9) 6I8803
Bolt-On Wear Plates — 2.36" (60 mm) (2) 8E3160 (2) 8E3160 (2) 8E3160
Rear Weld-On Wear Plate (4) 2A6724 (4) 2A6724 (4) 2A6724
Optional Wing (High Profile)
Bolt-On Edges (4) 4T6593 (4) 4T6593 (4) 4T6593
Bolt-On Bolts (16) 4F4042 (16) 4F4042 (16) 4F4042
Bolt-On Nuts (16) 2J3507 (16) 2J3507 (16) 2J3507
Bolt-On Washers (16) 5P8250 (16) 5P8250 (16) 5P8250
** On earlier built Modulok 101-8963 and 101-8965 support assemblies, where 117-6801 adapter cover cannot be pinned, use 109-9199 adapter cover.
** Wear plate 132-4714. Hex bolt version.
Bolt — Hex
268
Loaders
992
ROCK BUCKETS
Model 992, 992B 992, 992B 992, 992B 992C
Bucket Assembly 8K7190 2V6380** 8K7189 3V6623
8K8501 3V2468 3V4415 3V6625
3V2474
Edge Type Spade Spade Straight Spade
Width — inches 167.0 169.8 169.8 181.0
mm 4242 4313 4313 4598
Base Edge Assembly 9V4371
Base Edge 9V0009 9V4370
Corners (R/L) 3V3894/3 a 3V3894/3 a 3V3894/3 a 3V3240/39 ◊
Adapters
Center (2) 7J9554 (2) 7J9554 (8) 7J9554 (2) 3G9494 c,d
RH (3) 7J9555 (3) 7J9555 (3) 3G9495
LH (3) 7J9556 (3) 7J9556 (3) 3G9496
Tips J550 J550 J550 J550
Short 9W8551 9W8551 9W8551 9W8551
Long 9W8552 9W8552 9W8552 9W8552
Penetration 9W8559 9W8559 9W8559 9W8559
Heavy Duty Penetration 138-6552 138-6552 138-6552 138-6552
Heavy Duty Long 9N4552 9N4552 9N4552 9N4552
Heavy Duty Long Life (ARM) 101-9055 101-9055 101-9055 101-9055
Heavy Duty Abrasion 6Y2553 6Y2553 6Y2553 6Y2553
HD Pin 107-3378 107-3378 107-3378 107-3378
HD Retainer Assembly 107-8559 107-8559 107-8559 107-8559
Rear Wear Plates (2) 9K0071 (2) 9K0071 (2) 6W0276
(2) 6Y3610***b
Bolts (8) 4J9208 (8) 4J9208 (8) 4J9208
Nuts (8) 2J3507 (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250 (8) 5P8250
* Consists of edge and adapters. (Chart continued on next page)
** Rear wear plates not available for this bucket.
*** Optional thicker wear plate.
◊ For use with 2-strap adapters. Use 8K6489/90 corners when using no teeth or bottom strap adapters.
a For use with flushmount teeth. Use 8K6489/90 corners when using no teeth or bottom strap adapters.
b Rear wear plate 132-4712 requires (4) 1D4637 hex head bolts, (4) 2J3507 nuts, (4) 5P8250 washers.
c Heavy duty (shouldered) adapters and heavy duty long life adapters are available. See “Related Components” chart.
d Upsize adapters are available. See “Related Components” chart.
269
Loaders
992
270
Loaders
992
271
Loaders
992
272
Loaders
992
273
Loaders
992
ROCK BUCKETS — Continued
Model 992D 992G 992G 992G
Bucket Assembly 2Q3960 174-2281 153-5620 112-4199
Edge Type Spade Spade Spade Spade
Width — inches 187.0 189.9 189.9 189.9
mm 4750 4824 4824 4824
Base Edge Assembly 2Q0318 153-5621 132-7091
Base Edge 4E6462 170-1748 112-9033 132-7092
Sidebars/Corners (L/R) (2) 2Q3962** (2) 174-3391 (2) 112-9005 (2) 112-8996
Bolt-On Cutting Edges
Standard — Center 6I8364
RH Center 6I8365
RH End 6I8366
LH Center 6I8367
LH End 6I8368
Bolts (28) 5P8823
Nuts (28) 3K9770
Washers (28) 4K0684
Heavy Duty — Center 127-7429
RH Center 127-7433
RH End 127-7431
LH Center 127-7432
LH End 127-7430
Bolts (28) 5P8823
Nuts (28) 3K9770
Base Edge Wear Plates (2) 1U4933*** (2) 1U4933 (2) 1U4933*** (2) 1U4933***
Bolts (6) 4J9058 (6) 4J9058 (6) 4J9058 (6) 4J9058
Nuts (6) 2J3507 (6) 2J3507 (6) 2J3507 (6) 2J3507
Washers (6) 5P8250 (6) 5P8250 (6) 5P8250 (6) 5P8250
Sidebar Protector (2) 1U0740 (4) 1U0740 (4) 1U0740 (4) 1U0740
Pin (4) 133-0738 (8) 133-0738 (8) 133-0738 (8) 133-0738
Retainer Assembly (4) 107-8559 (8) 107-8559 (8) 107-8559 (8) 107-8559
Rear Wear Plates
Standard
End (2) 115-1548 (2) 115-1548 (2) 115-1548
Center (2) 6W0276* 115-1549 115-1549 115-1549
Heavy Duty (2) 6Y3610
Bolts (8) 4J9208
Nuts (8) 2J3507
Washers (8) 5P8250
* Rear wear plates for hex headbolts are available. Use 132-4712 rear wear plate, (4) 1D4637 hex headbolts, (4) 2J3507 nuts, (4) 5P8250 washers.
** For use with two strap corner adapters. Use 9U4312 sidebars for buckets without adapters.
*** Wide base edge wear plates (6Y0311/2) can be used with half-arrow segments.
274
Loaders
992
275
Loaders
992
276
Loaders
992
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 992C, D 992C 992C
MODULOK Edge Type Spade Spade Spade
Bucket Width — inches 187.00 181.00 181.00
mm 4750 4597 4597
Bucket Assembly 5V5387/9U3013◊◊ None 3V3254
9V0211, 106-1788, 2Q3269
Base Edge Assembly 9V0065 9V3789
Adapter* (9) 1U1554 (9) 1U1554 (7) 8J3961
Corner Adapter* (2) 3G1345
Bucket Corners (2) 5V5460 a/145-6998◊◊ (2) 5V5460 (2) 5V5460
Wear Plate — End (2) 4T6541 (2) 4T6541 (2) 4T6541
Wear Plate — Intermediate (3) 4T6540 (3) 4T6540 (3) 4T6540
Bolts (20) 8J2928 (20) 8J2928 (20) 4J9208
Nuts (20) 2J3507 (20) 2J3507 (20) 2J3507
Washers (20) 5P8250 (20) 5P8250 (20) 3K5234
Edge Cover — Center (2) 1U0869 (2) 8J3962 (2) 8J3962
Edge Cover — RH (3) 9J9973 (3) 9J9973 (3) 9J9973
Edge Cover — LH (3) 9J9974 (3) 9J9974 (3) 9J9974
Adapter Cover (9) 1U0741 (9) 1U0741 (9) 8J3960
Pin (9) 107-3378 (9) 107-3378 (9) 107-3378
Retainer Assembly (9) 107-8559 (9) 107-8559 (9) 107-8559
Heavy Duty Long Tip (9) 9N4552 (9) 9N4552 (9) 9N4552
HD Pin (9) 107-3378 (9) 107-3378 (9) 107-3378
HD Retainer Assembly (9) 107-8559 (9) 107-8559 (9) 107-8559
Sidebar Protector (2) 1U0740 (2) 1U0740 (2) 8J4143
Pin (Headed) (4) 133-0738 (4) 133-0738 (4) 9J8441
Retainer Assembly (4) 107-8559 (4) 107-8559 (4) 8E5559
Retainer (Weld-On Tab) (4) 8J4889
Optional Replacements
Wear Plate — End (2) 9J6836 (2) 9J6836 (2) 9J6836
Wear Plate — Center (3) 8J4974 (3) 8J4974 (3) 8J4974
Wear Plate — End (2) 100-6358◊
Wear Plate — Center (2) 100-6356◊
Wear Plate — Intermediate 100-6357◊
Tip — Long (9) 9W8551 (9) 9W8551 (9) 9W8551
Tip — Short (9) 9W8552 (9) 9W8552 (9) 9W8552
Tip — Penetration (9) 9W8559 (9) 9W8559 (9) 9W8559
Tip — Heavy Duty Abrasion (9) 6Y2553 (9) 6Y2553 (9) 6Y2553
Adapter Cover (9) 8E9543 (9) 8E9543
Edge Cover — Center (2) 8E9514 (2) 107-8594
Edge Cover — RH (3) 8E9515 (3) 8E9515
Edge Cover — LH (3) 8E9516 (3) 8E9516
Rear Wear Plates** (2) 6W0276 (2) 6W0276
(2) 6Y3610***◊ (2) 6Y3610***◊
Bolts (8) 4J9208 (8) 4J9208
Nuts (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250
* Part of base edge assembly. (Chart continued on next page)
** These are rear wear plates for buckets with MODULOK edges.
*** Optional thicker wear plates.
◊ 1.75" (45 mm) thick. 132-4712 is hex bolt version of rear wear plate.
◊◊ This part number is for 992D.
a 992D bucket sidebar is 9U4315.
277
Loaders
992
278
Loaders
992
BASE EDGES AND RELATED COMPONENTS AVAILABLE AT REPLACEMENT TIME
Base Edge 9V0009 a 3V3890 a 9U3846 9V0005 a
9V0007 a 9V0006 a**
Corners 3V3894/3* 3V3894/3* 3V3894/3* (2) 9V6132*
Weld-On Adapters
2 Strap — Center (8) 3G9494 (8) 3G9494 (2) 3G9494
RH (3) 3G9495
LH (3) 3G9496
2 Strap Heavy Duty — Center (8) 107-3554 (8) 107-3554 (2) 107-3554
RH (3) 107-3555
LH (3) 107-3556
2 Strap Heavy Duty Long Life (ARM)
Center (8) 112-2554 (8) 112-2554 (2) 112-2554
RH (3) 112-2555
LH (3) 112-2556
Flushmount — Center (8) 7J9554 b (8) 3G4554 b (8) 3G4554 b (2) 3G4554 b
RH (3) 3G4555 b
LH (3) 3G4556 b
Bottom Strap — Center (8) 9J3662 b (8) 9J3662 b (8) 9J3662 b (2) 9J3662 b
RH (3) 9J3663 b
LH (3) 9J3664 b
Tips
Short 9W8551 9W8551 9W8551 9W8551
Long 9W8552 9W8552 9W8552 9W8552
Penetration 9W8559 9W8559 9W8559 9W8559
Heavy Duty Penetration 138-6552 138-6552 138-6552 138-6552
Heavy Duty Long 9N4552 9N4552 9N4552 9N4552
Heavy Duty Abrasion 6Y2553 6Y2553 6Y2553 6Y2553
Heavy Duty Long Life (ARM) 101-9055 101-9055 101-9055 101-9055
Heavy Duty Pin 107-3378 107-3378 107-3378 107-3378
Heavy Duty Retainer Assembly 107-8559 107-8559 107-8559 107-8559
Optional Larger Weld-On Adapters
2 Strap — Center (8) 9W9704 (8) 9W9704 (2) 9W9704
RH (3) 9W9705
LH (3) 9W9706
Optional Larger Tips (J700)
Long 4T4702 4T4702 4T4702
Abrasion 4T4703 4T4703 4T4703
Penetration 4T4709 4T4709 4T4709
Heavy Duty Penetration 135-9700 135-9700 135-9700
Heavy Duty Long 9U9702 9U9702 9U9702
Heavy Duty Long Life (ARM) 107-2001 107-2001 107-2001
Heavy Duty Abrasion 9U9703 9U9703 9U9703
Heavy Duty Pin 113-4708 113-4708 113-4708
Heavy Duty Retainer Assembly 113-4709 113-4709 113-4709
Bolt-On Segments◊
Standard — 1.6" (40 mm)
Center (7) 4T6760
Heavy Duty — 2" (50 mm)
Center (7) 107-3530
Heavy Duty — 2.4" (60 mm)
Center (7) 107-6294
Half Arrow — 2.4" (60 mm)
Center (7) 119-9600
Half Arrow — 3" (75 mm)
Center (7) 109-2675
* For use with two-strap or flushmount teeth. Use 8K6489/90 corners when using no teeth or bottom strap teeth.
** High lift base edge. Requires (2) 9V6559 corners with two-strap teeth.
◊ Segments can be used with standard or optional larger adapters.
a Base edge does not accept bolt-on segments between teeth. 6Y2107 half-arrow section can be welded to bare base edge between two-strap and bottom strap teeth.
b Not recommended for use with segments.
279
Loaders
992
BASE EDGES AND RELATED COMPONENTS AVAILABLE AT REPLACEMENT TIME — Continued
Base Edge 9V4370 9V3566 4E6462 107-8570 b
Corner (2) 4E6385* (2) 4E6385* (2) 4E6385* (2) 9U3837
Weld-On Adapters
2 Strap — Center (2) 3G9494 (2) 3G9494 (2) 3G9494 (2) 6I6804
RH (3) 3G9495 (3) 3G9495 (3) 3G9495 (3) 6I8605
LH (3) 3G9496 (3) 3G9496 (3) 3G9496 (3) 6I8606
2 Strap Heavy Duty — Center (2) 107-3554 (2) 107-3554 (2) 107-3554 (2) 119-8604
RH (3) 107-3555 (3) 107-3555 (3) 107-3555 (3) 119-8605
LH (3) 107-3556 (3) 107-3556 (3) 107-3556 (3) 119-8606
2 Strap Heavy Duty Long Life (ARM)
Center (2) 112-2554 (2) 112-2554 (2) 112-2554 (2) 119-8607
RH (3) 112-2555 (3) 112-2555 (3) 112-2555 (3) 119-8609
LH (3) 112-2556 (3) 112-2556 (3) 112-2556 (3) 119-8608
Flushmount — Center (2) 3G4554 a (2) 3G4554 a (2) 3G4554 a
RH (3) 3G4555 a (3) 3G4555 a (3) 3G4555 a
LH (3) 3G4556 a (3) 3G4556 a (3) 3G4556 a
Bottom Strap — Center (2) 9J3662 a (2) 9J3662 a (2) 9J3662 a
RH (3) 9J3663 a (3) 9J3663 a (3) 9J3663 a
LH (3) 9J3664 a (3) 9J3664 a (3) 9J3664 a
Tips
Short 9W8551 9W8551 9W8551 6I6601
Long 9W8552 9W8552 9W8552 6I6602
Penetration 9W8559 9W8559 9W8559 7I7609
Heavy Duty Penetration 138-6552 138-6552 138-6552 135-9600
Heavy Duty Long 9N4552 9N4552 9N4552 7Y0602
Heavy Duty Long Life (ARM) 101-9055 101-9055 101-9055 107-8602
Heavy Duty Abrasion 6Y2553 6Y2553 6Y2553 6I6603
Heavy Duty Pin 107-3378 107-3378 107-3378 113-9608
Heavy Duty Retainer Assembly 107-8559 107-8559 107-8559 113-9609
Optional Larger Weld-On Adapters
2 Strap — Center (2) 9W9704# (2) 9W9704# (2) 9W9704# (2) 133-0704◊
RH (3) 9W9705# (3) 9W9705# (3) 9W9705# (3) 133-0705◊
LH (3) 9W9706# (3) 9W9706# (3) 9W9706# (3) 133-0706◊
Optional Larger Tips
Long 4T4702 4T4702 4T4702 4T4702
Abrasion 4T4703 4T4703 4T4703 4T4703
Penetration 4T4709 4T4709 4T4709 4T4709
Heavy Duty Penetration 135-9700 135-9700 135-9700 135-9700
Heavy Duty Long 9U9702 9U9702 9U9702 9U9702
Heavy Duty Long Life (ARM) 107-2001 107-2001 107-2001 107-2001
Heavy Duty Abrasion 9U9703 9U9703 9U9703 9U9703
Heavy Duty Pin 113-4708 113-4708 113-4708 113-4708
Heavy Duty Retainer Assembly 113-4709 113-4709 113-4709 113-4709
Bolt-On Segments◊◊
Standard — 1.6" (40 mm) — Center (1) 4T6760 (1) 4T6760 (1) 4T6760
RH (3) 4T6761 (3) 4T6761 (3) 4T6761
LH (3) 4T6762 (3) 4T6762 (3) 4T6762
Bolts (28) 5P8823 (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770 (28) 3K9770
Heavy Duty — 2" (50 mm) — Center (1) 107-3530 (1) 107-3530 (1) 107-3530
RH (3) 107-3531 (3) 107-3531 (3) 107-3531
LH (3) 107-3532 (3) 107-3532 (3) 107-3532
Bolts (28) 5P8823 (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770 (28) 3K9770
Heavy Duty — 2.4" (60 mm) — Center (1) 107-6294 (1) 107-6294 (1) 107-6294
RH (3) 107-6295 (3) 107-6295 (3) 107-6295
LH (3) 107-6296 (3) 107-6296 (3) 107-6296
Bolts (28) 5P8823 (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770 (28) 3K9770
Half Arrow — 2.4" (60 mm) — Center (1) 119-9600 (1) 119-9600 (1) 119-9600
RH (3) 119-9601 (3) 119-9601 (3) 119-9601
LH (3) 119-9602 (3) 119-9602 (3) 119-9602
Bolts (28) 5P8823 (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770 (28) 3K9770
Half Arrow — 3" (75 mm) — Center (1) 109-2675 (1) 109-2675 (1) 109-2675
RH (3) 109-2676 (3) 109-2676 (3) 109-2676
LH (3) 109-2677 (3) 109-2677 (3) 109-2677
Bolts (28) 5P8823 (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770 (28) 3K9770
* For high lift bucket use 4E6386 corner.
◊ Heavy duty long life (ARM) adapters are available: 133-0707 Center, 133-0709 RH, 133-0708 LH.
◊◊ Segments can be used with standard or optional larger adapters.
a Not recommended for use with segments.
b Base edge is 70 mm thick and uses J600 size teeth and adapters.
# Use 4E6387 corners with larger adapters.
NOTE: See Wear Protection Section for Mechanically Attached Wear Plate options.
280
Loaders
990
WHEEL LOADER BUCKET — ROCK
Model 990 990 990
Bucket Assembly 101-9178 151-5979 9U2027
Edge Type Spade Spade Spade
Width — inches 175.2 175.2 175.2
mm 4450 4450 4450
Base Edge Assembly* 112-2118 112-2119
Base Edge 101-9188 151-5980 4E9915
Corners (2) 145-6990 (2) 145-6989 (2) 145-6990
Adapters**
2-Strap (Std)
Center (2) 3G9494** (2) 3G9494**
RH (3) 3G9495 (3) 3G9495
LH (3) 3G9496 (3) 3G9496
2-Strap Heavy Duty
Center (2) 107-3554** (2) 107-3554**
RH (3) 107-3555 (3) 107-3555
LH (3) 107-3556 (3) 107-3556
Tips J550 J550
Short 9W8551 9W8551
Long 9W8552 9W8552
Penetration 9W8559 9W8559
Heavy Duty Penetration 138-6552 138-6552
Heavy Duty Long 9N4552 9N4552
Heavy Duty Long Life (ARM) 101-9055 101-9055
Heavy Duty Abrasion 6Y2553 6Y2553
Heavy Duty Pin 107-3378 107-3378
Heavy Duty Retainer Assembly 107-8559 107-8559
Rear Wear Plates (2) 6Y3573 (2) 6Y3573 (2) 6Y3573
Bolts (8) 4J9208 (8) 4J9208 (8) 4J9208
Nuts (8) 2J3507 (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250 (8) 5P8250
Outer Lower Wear Plate (2) 4E9889 (2) 4E9889 (2) 4E9889
Bolt-On Segments
Standard — 1.6" (40 mm) — Center 4T6760
RH (3) 4T6761
LH (3) 4T6762
Bolts (28) 5P8823
Nuts (28) 3K9770
Heavy Duty — 2" (50 mm) — Center 107-3530
RH (3) 107-3531
LH (3) 107-3532
Bolts (28) 5P8823
Nuts (28) 3K9770
Heavy Duty — 2.4" (60 mm) — Center 107-6294
RH (3) 107-6295
LH (3) 107-6296
Bolts (28) 5P8823
Nuts (28) 3K9770
Half Arrow — 2.4" (60 mm) — Center 119-9600
RH (3) 119-9601
LH (3) 119-9602
Bolts (28) 5P8823
Nuts (28) 3K9770
Half Arrow — 3" (75 mm) — Center 109-2675
RH (3) 109-2676
LH (3) 109-2677
Bolts (28) 5P8823
Nuts (28) 3K9770
Bolt-On Edges — 1.6" (40 mm)
R Center 106-6421
R End 162-3297
Center 106-6420
L Center 106-6423
L End 162-3296
Bolts (32) 5P8823
Nuts (32) 3K9770
Washers (32) 4K0684
Sidebar Protector (2) 1U0740 (2) 1U0740 (2) 1U0740
Pin (4) 133-0738 (4) 133-0738 (4) 133-0738
Retainer Assembly (4) 107-8559 (4) 107-8559 (4) 107-8559
* Consists of edge and adapters welded-on.
** Upsize adapters for J700 tips are available: 9W9704 (Center), 9W9705 (RH), 9W9706 (LH); Heavy Duty 133-0704 (Center), 133-0705 (RH), 133-0706 (LH).
281
Loaders
990
282
Loaders
990
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 990
Bucket Assembly 101-9179
MODULOK Edge Type Spade
Width — inches 176.6
mm 4486
Base Edge Assembly 102-6214
Adapter (8) 1U1554
Corner Adapter
Bucket Corners (2) 145-6991
Wear Plate
End (2) 4T6541
Center 4T6539
(2) 4T6540
Bolts (19) 4J9208
Nuts (19) 2J3507
Washers (19) 5P8250
Edge Cover
Center 1U0869
RH (3) 102-9680
LH (3) 102-9681
Adapter Cover (8) 1U0741
Pin (8) 107-3378
Retainer Assembly (8) 107-8559
Heavy Duty Long Tip (8) 9N4552
HD Pin (8) 107-3378
HD Retainer Assembly (8) 107-8559
Sidebar Protector (2) 1U0740
Pin (Headed) (4) 133-0738
Retainer Assembly (4) 107-8559
Retainer (Weld-On Tab)
Optional Replacement
Wear Plate — End
Wear Plate — Center
Tips
Long (8) 9W8552
Short (8) 9W8551
Penetration (8) 9W8559
Heavy Duty Penetration (8) 138-6552
Heavy Duty Abrasion (8) 6Y2553
Rear Wear Plates (2) 6Y3573
Bolts (8) 4J9208
Nuts (8) 2J3507
Washers (8) 5P8250
283
Loaders
990
HIGH CAPACITY/HEAVY DUTY QUARRY BUCKETS
Model 990 990
Bucket Assembly 2Q4239 2Q7097
Bucket Type High Capacity Heavy Duty Quarry
Lift Configuration Standard Standard
Bucket Width — Inches (Millimeters) 181.5 (4610) 175.2 (4450)
Capacity — Cubic Yards (Cubic Meters) 12.0 (9.2) 11.2 (8.6)
Sidebar/Corners (R/L) (2) 145-6990 (2) 145-6993
Base Edge Assembly 2Q4246 2Q7059
Base Edge 2Q4247 4E9915
Adapters: Center (2) 107-3554 (2) 107-3554
RH (3) 107-3555 (2) 107-3555
RH End (ARM) 112-2555
LH (3) 107-3556 (2) 107-3556
LH End (ARM) 112-2556
Wear Plates: Liner — Flat 2Q3647
Liner — Curved (3) 2Q7065
Skid Plate (2) 2Q7063
Hinge Bracket Plate (4) 2Q7064
Outer Lower Plate (2) 4E9889 (2) 2Q7042
Outer Upper Plate (2) 2Q7071
Inner Side Plate (2) 2Q3645
Bucket Tip
Style/Size J550 J550
Long 9W8552 9W8552
Short 9W8551 9W8551
Heavy Duty Long 9N4552 9N4552
Heavy Duty Long Life (ARM) 101-9055 101-9055
Heavy Duty Abrasion 6Y2553 6Y2553
Heavy Duty Penetration 138-6552 138-6552
Penetration 9W8559 9W8559
Heavy Duty Pin 107-3378 107-3378
Heavy Duty Retainer Assembly 107-8559 107-8559
Base Edge Wear Plates: Narrow* 4T6381* (2) 1U4929*
Bolts (4) 4J9058 (8) 4J9058
Nuts (4) 2J3507 (8) 2J3507
Washers (4) 5P8250 (8) 5P8250
Wide** 6Y0313** (2) 9U9862**
Bolts (4) 4J9058 (8) 4J9058
Nuts (4) 2J3507 (8) 2J3507
Washers (4) 5P8250 (8) 5P8250
Rear Wear Plates: Heavy Duty (2) 6Y3573 (2) 6Y3573
Bolts (8) 4J9208 (8) 4J9208
Nuts (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250
Sidebar Protectors (2) 1U0740 (4) 1U0740
Pin (4) 133-0738 (8) 133-0738
Retainer Assembly (4) 107-8559 (8) 107-8559
Bolt-On Segments: Standard — 1.6" (40 mm)
Center 4T6760 4T6760
RH (3) 4T6761 (3) 4T6761
LH (3) 4T6762 (3) 4T6762
Bolts (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770
Heavy Duty — 2" (50 mm) — Center 107-3530 107-3530
RH (3) 107-3531 (3) 107-3531
LH (3) 107-3532 (3) 107-3532
Bolts (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770
Heavy Duty — 2.4" (60 mm) — Center 107-6294 107-6294
RH (3) 107-6295 (3) 107-6295
LH (3) 107-6296 (3) 107-6296
Bolts (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770
Half Arrow — 2.4" (60 mm) — Center 119-9600 119-9600
RH (3) 119-9601 (3) 119-9601
LH (3) 119-9602 (3) 119-9602
Bolts (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770
Half Arrow — 3" (75 mm) — Center 109-2675 109-2675
RH (3) 109-2676 (3) 109-2676
LH (3) 109-2677 (3) 109-2677
Bolts (28) 5P8823 (28) 5P8823
Nuts (28) 3K9770 (28) 3K9770
* Use narrow base edge wear plates with standard or heavy duty (flat) segments.
** Use wide base edge wear plates with half-arrow segments.
NOTE: See Wear Protection Section for Mechanically Attached Wear Plate options.
284
Loaders
988
Note: Base edges can be upgraded to the latest universal edge that will accept segments and with corners to accept sidebar
protectors. Refer to “Base Edges and Related Components Available at Replacement Time” for part number information.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
285
Loaders
988
ROCK BUCKETS
Model 988 988
Bucket Assembly 8K6183 8K6184
2V6382
Edge Type Spade Spade
Width — inches 134.4 134.4
mm 3414 3414
Base Edge 8V9583 8V9583
Corners (R/L) 7K9309/10 (2) 6W9414 a
Adapters♦
Center♦ (2) 8E0464♦
RH♦ (3) 8E0465♦
LH♦ (3) 8E0466♦
Tips J450
Short 9W8451
Long 9W8452
Penetration 9W8459
Heavy Duty Penetration 138-6451
Heavy Duty Long 9N4452
Heavy Duty Long Life (ARM) 101-9054
Heavy Duty Abrasion 9N4453
Pin♦ 114-0468♦
Retainer Assembly♦ 107-3469♦
a Use 7K9309/10 corners when using no teeth or bottom strap teeth. (Chart continued below)
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
ROCK BUCKETS — Continued
Model 988B 988B 988B
Bucket Assembly 9V1340 5V1223 9V0218
5V1221 9V1343
9V6603 d
Edge Type Spade Straight Straight
Width — inches 143.5 143.5 143.5
mm 3645 3645 3645
Base Edge Assembly 116-7206
Base Edge 8V9585 b,c 9V0232◊,c 9V0232◊,c
Corners (R/L) (2) 145-6984 e 7K9309/10 7K9309/10
Adapters ♦
Center♦ (2) 114-0464*♦,a
RH♦ (3) 114-0465♦,a*
LH♦ (3) 114-0466♦,a*
Tips J450
Short 9W8451
Long 9W8452
Penetration 9W8459
Heavy Duty Penetration 138-6451
Heavy Duty Long 9N4452
Heavy Duty Long Life (ARM) 101-9054
Heavy Duty Abrasion 9N4453
HD Pin♦ 114-0468♦
HD Retainer Assembly♦ 107-3469♦
Rear Wear Plates (2) 9V5793*** (2) 9V5793*** (2) 9V5793***
(2) 6Y3609** (2) 6Y3609** (2) 6Y3609**
Bolts (8) 4J9058 (8) 4J9058 (8) 4J9058
Nuts (8) 2J3507 (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250 (8) 5P8250
Sidebar Protector (2) 9J9600
Pin (4) 135-9350
Retainer Assembly (4) 114-0359
* Two strap adapters that will accommodate larger tips are available. See “Related Components” chart. (Chart continued on next page)
** Optional thicker wear plates.
*** Wear plate (hex bolt) 132-4713.
◊ For bolt-on edges or segments, use optional 9C2932 base edge. See “Related Components” chart.
a Optional shouldered heavy duty adapters and shouldered heavy duty long life (ARM) adapters are available. See “Related Component” chart.
b For bolt-on segments, use 8R4649 base edge or 116-7201 edge assembly. For bolt-on edges use 8R4649 base edge.
c 8J8176 or 6Y2107 half-arrow section can be welded to bare base edges or between two-strap teeth.
d High Lift Bucket.
e Corners (R/L) for 5V1221 are 7K9309/10.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
286
Loaders
988
ROCK BUCKETS — Continued
Model 988B 988B 988B 988B/F
Bucket Assembly 5V1222 4E0068 9V3564 111-1509
9V0217 9V0216 4E0062 145-6496
9V1342 9V1340
9V6604 e 9V1341
4E0070
Edge Type Straight Spade Spade Spade
Width — inches 143.5 143.5 143.5 143.5
mm 3645 3645 3645 3645
Base Edge Assembly 4E0056 116-7206 116-7201 116-7201
Base Edge 9V0232◊,d 8V9585◊◊,d 8R4649 8R4649
Corners (R/L) 6W9412/3 a (2) 145-6984 a (2) 8R4646 (2) 145-6984
Adapters ♦
Center♦ (8) 8E0464♦ (2) 8E3464*♦,c (2) 8E3464*♦,c (2) 114-0464♦
RH♦ (3) 8E3465*♦,c (3) 8E3465*♦,c (3) 114-0465♦
LH♦ (3) 8E3466*♦,c (3) 8E3466*♦,c (3) 114-0466♦
Tips J450 J450 J450 J450
Short 9W8451 9W8451 9W8451 9W8451
Long 9W8452 9W8452 9W8452 9W8452
Penetration 9W8459 9W8459 9W8459 9W8459
Heavy Duty Penetration 138-6451 138-6451 138-6451 138-6451
Heavy Duty Long 9N4452 9N4452 9N4452 9N4452
Heavy Duty Long Life (ARM) 101-9054 101-9054 101-9054 101-9054
Heavy Duty Abrasion 9N4453 9N4453 9N4453 9N4453
HD Pin♦ 114-0468♦ 114-0468♦ 114-0468♦ 114-0468♦
HD Retainer Assembly♦ 107-3469♦ 107-3469♦ 107-3469♦ 107-3469♦
Rear Wear Plates (2) 9V5793**** (2) 9V5793**** (2) 9V5793**** (2) 9V5793****
(2) 6Y3609*** (2) 6Y3609*** (2) 6Y3609*** (2) 6Y3609***
Bolts (8) 4J9058 (8) 4J9058 (8) 4J9058 (8) 4J9058
Nuts (8) 2J3507 (8) 2J3507 (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250 (8) 5P8250 (8) 5P8250
Bolt-On Segments
Center 9W5734 b 9W5734 b
RH (3) 9W5737**b (3) 9W5737**b
LH (3) 9W5730**b (3) 9W5730**b
Bolts (21) 6V6535 (21) 6V6535
Nuts (21) 3K9770 (21) 3K9770
Base Edge Wear Plates (2) 1U4929 f (2) 1U4929 f
Bolts (6) 4F4042 (6) 4F4042
Nuts (6) 2J3507 (6) 2J3507
Washers (6) 5P8250 (6) 5P8250
Sidebar Protector (2) 9J9600 (2) 9J9600 (2) 9J9600
Pin (4) 135-9350 (4) 135-9350 (4) 135-9350
Retainer Assembly (4) 114-0359 (4) 114-0359 (4) 114-0359
* Two strap adapters that will accommodate larger tips are available. See “Related Components” chart.
** Wider one-way end segments available: 9W8367 (right end), 9W8368 (left end).
*** Optional thicker wear plates.
**** Wear plate (hex bolt) 132-4713.
◊ For bolt-on edges or segments, use 9C2932 base edge.
◊◊ For bolt-on segments, use optional 8R4649 base edge or 116-7201 edge assembly. For bolt-on edges, use 8R9649 base edge. See “Related Components” chart.
a Use 7K9309/10 corners when using no teeth or bottom strap teeth.
b Optional thicker flat and half-arrow segments are available. See “Related Components” chart.
c Optional shouldered heavy duty adapters and shouldered heavy duty long life (ARM) adapters are available. See “Related Components” chart.
d 8J8176 or 6Y2107 half-arrow section can be welded to bare base edges or between two-strap teeth.
e High Lift Bucket.
f Use (2) 7T9127 with half-arrow segments.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
287
Loaders
988
288
Loaders
988
289
Loaders
988
290
Loaders
988
291
Loaders
988
292
Loaders
988
Protector
Flushmounted
Adapter
Wear Plate
MODULOK SYSTEM
Model 988A 988A 988B 988B 988F
MODULOK Edge Type Spade Straight Spade Spade Spade
Bucket Width — inches 132.1 132.1 143.5 143.5 148.7
Bucket Width — mm 3356 3356 3645 3645 3776
Bucket Assembly 2V6147 None 5V1224 2Q4434 9U4183
9V1344 4E0065 2Q3257
9V0219 145-6502
Base Edge Assembly 4E0055 4E0051 4E0064 4E0064 8R5610
Adapter a,♦ (6) 8E1464♦ (6) 8E1464♦ (7) 8E1464♦ (7) 8E1464♦ (7) 8E1464♦
Corner Adapter a,♦ (2) 8E1465♦ (2) 8E1465♦ (2) 8E1465♦ (2) 8E1465♦ (2) 8E1465♦
Bucket Corners (2) 9J1551 (2) 9J1551 (2) 145-6976 (2) 145-6983 (2) 145-6983
Wear Plate — Center (2) 4T6384 (2) 4T6393 (2) 4T6384 (2) 4T6384 (2) 9U9862
Wear Plate — End (2) 4T6390 (2) 4T6384 (2) 4T6383 (2) 4T6383 (2) 4T6383
Bolts (14) 4F4042 (14) 4F4042 (16) 4J9058 (16) 4J9058 (16) 4J9058
Nuts (14) 2J3507 (14) 2J3507 (16) 2J3507 (16) 2J3507 (16) 2J3507
Washers (14) 5P8250 (14) 5P8250 (16) 5P8250 (16) 5P8250 (16) 5P8250
Edge Cover — Center 8J8313 (7) 8J6400 (2) 9U9332 (2) 9U9332 (2) 9U9664
Edge Cover — RH (3) 9U9334 (3) 9U9334 (3) 9U9334 (3) 9U9334
Edge Cover — LH (3) 9U9333 (3) 9U9333 (3) 9U9333 (3) 9U9333
Adapter Cover♦ (8) 9U9331 (8) 9U9331 (9) 9U9331 (9) 9U9331 (9) 9U9331
Pin (8) 6Y2527♦ (8) 6Y2527♦ (9) 6Y2527♦ (9) 6Y2527 (9) 6Y2527♦
Retainer Assembly (8) 8E6359♦ (8) 8E6359♦ (9) 8E6359♦ (9) 8E6359 (9) 8E6359♦
Heavy Duty Long Tip (8) 9N4452 (8) 9N4452 (9) 9N4452 (9) 9N4452 (9) 9N4452
HD Pin♦ (8) 114-0468♦ (8) 114-0468♦ (9) 114-0468♦ (9) 114-0468♦ (9) 114-0468♦
HD Retainer Assembly♦ (8) 107-3469♦ (8) 107-3469♦ (9) 107-3469♦ (9) 107-3469♦ (9) 107-3469♦
Sidebar Protector (2) 8J6399 (2) 8J6399 (2) 9J9600 (2) 9J9600 (2) 9J9600
Pin (Headed) (4) 9J8442 (4) 9J8442 (4) 135-9350 (4) 135-9350 (4) 135-9350
Retainer Assembly (4) 8E6359 (4) 8E6359 (4) 114-0359 (4) 114-0359 (4) 114-0359
Retainer (Weld-On Tab) (4) 8J4889 (4) 8J4889
Optional Replacements
Wear Plate End (2) 4T6540 (2) 4T6539 (2) 4T6540 (2) 4T6540 (2) 6I8607
Wear Plate Center (2) 4T6553 (2) 4T6540 (2) 4T6541 (2) 4T6541 (2) 4T6541
Tip — Long (8) 9W8452 (8) 9W8452 (9) 9W8452 (9) 9W8452 (9) 9W8452
Tip — Short (8) 9W8451 (8) 9W8451 (9) 9W8451 (9) 9W8451 (9) 9W8451
Tip — Penetration (8) 9W8459 (8) 9W8459 (9) 9W8459 (9) 9W8459 (9) 9W8459
Tip — Heavy Duty Abrasion (8) 9N4453 (8) 9N4453 (9) 9N4453 (9) 9N4453 (9) 9N4453
Rear Wear Plates (2) 9V5793 (2) 9V5793 (2) 9V5793
Heavy Duty (2) 6Y3609 (2) 6Y3609 (2) 6Y3609
Bolts (8) 4J9058 (8) 4J9058 (8) 4J9058
Nuts (8) 2J3507 (8) 2J3507 (8) 2J3507
Washers (8) 5P8250 (8) 5P8250 (8) 5P8250
Hex Bolt Type (2) 132-4713 (2) 132-4713 (2) 132-4713
Bolts (8) 1D4709 (8) 1D4709 (8) 1D4709
a Part of Base Edge Assembly.
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
293
Loaders
988
294
Loaders
988
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
295
Loaders
988
296
Loaders
988
297
Loaders
983
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
ROCK BUCKETS
Bucket Assembly 3V4194 9K6024 3V3342 3V4193
Width — inches 122.0 128.2 129.0 129.5
Width — mm 3099 3257 3277 3289
Base Edge Assembly 137-6266# 8E0049 b 137-6263 a
Base Edge 9V0237 9V4650 8V9591 9V0235
Corners (R/L) 3V3311/0 7K9309/10 3V3311/0 3V3311/0
Adapters
Center (8) 8E3464♦ (4) 7T8454♦ (4) 4T7454♦ (8) 4T7454♦
RH 7T8455♦ (2) 4T7455♦
LH 7T8456♦ (2) 4T7456♦
Tips J450 J450 J450 J450
Short 9W8451 9W8451 9W8451 9W8451
Long 9W8452 9W8452 8W8452 9W8452
Penetration 9W8459 9W8459 9W8459 9W8459
Heavy Duty Long 9N4452 9N4452 9N4452 9N4452
Heavy Duty Long Life (ARM) 101-9054 101-9054 101-9054 101-9054
Heavy Duty Abrasion 9N4453 9N4453 9N4453 9N4453
Pin♦ 6Y2527 6Y2527 6Y2527
Retainer Assembly♦ 8E6359 8E6359 8E6359
Heavy Duty Pin 114-0468♦
Heavy Duty Retainer Assembly 107-3469♦
* Replace with 7T8454.
a Includes J460 adapters (114-0464/5/6).
b Includes J460 adapters (8E0464/5/6).
# Heavy duty adapters (discontinued).
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
298
Loaders
983
SLAG BUCKETS
Bucket Assembly 7K2906 4V5288
Width — inches 118.0 119.5
mm 2997 3035
Base Edge Assembly 7K2749 9V1305
Base Edge 7K2736 9V1306
Corners (2) 7K2724
Adapters♦
Center♦ (5) 7K2831 (6) 3G9494
RH♦
LH♦
Tips J550
Short 7K2834 9W8551
Long 9W8552
Abrasion
Penetration 9W8559
Heavy Duty Long 9N4452
Heavy Duty Long Life (ARM) 101-9054
Heavy Duty Abrasion 6Y2553
Heavy Duty Pin 107-3378
Heavy Duty Retainer Assembly 107-8559
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
DEMOLITION BUCKETS
Bucket Arrangement 7K3916
7K8710
Bucket Group 7K3195
Width — inches 95.8
mm 2433
Clamp Assembly 7K3172
Cutting Edge (Bolt-On) 4T8376
Bolts (30) 3F5108
Nuts (30) 4K0367
Bucket Assembly 7K3603
Base Edge Assembly
Consisting of:
Base Edge 7K2326
Corners
Adapters (8) 6K7850
Tips
Long 4K4962
Rock 6K7228
Pin 4K0033
Retainer 4K0006
299
Loaders
983
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
300
Loaders
J450/J460 UPDATE
J450/J460 UPDATE
Though similar in appearance, there is a major difference between the J450 and new
J460 families. The J460 size is not an increase in width from 4.50" to 4.60". The new
J460 parts provide improved retention capabilities by increasing the pin size from
19.05 mm to 23.81 mm in diameter and the adapter pin bore from 21 mm to 25 mm.
The retainer also increased in size. The tips for both the J450 and J460 adapters,
however, are the same. Customers and dealers should be aware that either the J450 or
J460 adapters could be on 988/235 buckets and any other buckets with upsized
J450/J460 adapters. Current production buckets are using J460 adapters exclusively.
The attached list identifies the J450 adapter part numbers along with the J460.
J460 J450
Adapter Number Number
Flushmount—Center 8E0464 7T8454
Flushmount—Right 8E0465 7T8455
Flushmount—Left 8E0466 7T8456
MODULOK System—Center 8E1464 8J6396
MODULOK System—Corner 8E1465 8J6397
Sidecutter—Right 8E1468 8J5185
Sidecutter—Left 8E1469 8J5186
Two Strap Excavators—Center 6I6464 1U1454
Two Strap Excavators—Right 8E2465 1U1455
Two Strap Excavators—Left 8E2466 1U1456
Corner Guard—Center 8E2467 4T8457
Corner Guard—Right 8E2468 4T8459
Corner Guard—Left 8E2469 4T8458
Two Strap Loader—Center 8E3464 4T7454
Two Strap Loader—Right 8E3465 4T7455
Two Strap Loader—Left 8E3466 4T7456
Corner Guard—Center 8E3467 4T7457
Corner Guard—Right 8E3468 4T7459
Corner Guard—Right 8E3469 4T9458
Adapter Nose 8E4464 6Y3454
Two Strap FS—Right 8E4465 3G7455
Two Strap FS—Left 8E4466 3G7456
Bottom Strap—Center 8E5464 9J3667
Bottom Strap—Right 8E5465 9J3665
Bottom Strap—Left 8E5466 9J3666
Two Strap Excavators—Right 6I6465 9W2455
Two Strap Excavators—Left 6I6466 9W2456
Two Strap Loader—Center 8E2164 4T8454
Two Strap Loader—Right 8E2165 4T8455
Two Strap Loader—Left 8E2166 4T8456
Pin 8E0468 6Y2527
Retainer 8E8469 8E6359
Heavy Duty Pin 114-0468
Heavy Duty Retainer Assembly 107-3469
301
Loaders
980
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
302
Loaders
980
303
Loaders
980
304
Loaders
980
305
Loaders
980
ROCK BUCKETS
Model 980, 980B 980, 980B 980C 980C
Bucket Assembly 8K0071 2V6367 3V7233 4V2719
1V6548 9V0221 9V0222
Edge Type Spade Spade Spade Spade
Width — inches 128.3 129.0 132.7 132.7
mm 3258 3277 3373 3373
Base Edge Assembly 9V0233
Base Edge 8V9580 8V9580 8V9581 8V9581
Corners (R/L) 7K9309/10 a (2) 2V6299 a 3V7198/7 a 7K9309/10 a
Adapters
Center (2) 1U1354 (2) 1U1350
RH (3) 1U1355 (3) 1U1351
LH (3) 1U1356 (3) 1U1352
Tips J350 J350
Short 1U3351 1U3351
Long 1U3352 1U3352
Penetration 9J4359 9J4359
Heavy Duty Long 9N4352 9N4352
Heavy Duty Long Life (ARM) 100-3130 100-3130
Heavy Duty Abrasion 9N4353 9N4353
Heavy Duty Pin 114-0358 114-0358
Heavy Duty Retainer Assembly 114-0359 114-0359
Rear Wear Plates (2) 9W6750 (2) 9W6750
Bolts (8) 5J4773 (8) 5J4773
Nuts (8) 2J3506 (8) 2J3506
Washers (8) 5P8248 (8) 5P8248
(Chart continued below)
a Use 3V7197/8 corners with bottom-strap teeth. Use two 2V6299 corners with flushmount corner teeth. Use 7K9309/10 corners when not using corner teeth.
306
Loaders
980
307
Loaders
980
308
Loaders
980
309
Loaders
980
310
Loaders
980
311
Loaders
980
312
Loaders
977
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
313
Loaders
977
314
Loaders
977
MULTI-PURPOSE BUCKETS
Bucket Arrangement 1V3669 5V7347
Bucket Group 1V3511 5V7348
Width — inches 98.0 96.0
mm 2489 2438
Dozer Assembly 1V2074 1V2074
Bolt-On Cutting Edge
Center 4T8375 4T8375
Ends
Bolts (15) 5J4773 b (15) 5J4773 b
Nuts (15) 2J3506 (15) 1B4331
Bowl Assembly 1V1818 7V0907
Base Edge 8K9499 a 6W2983
Corners (R/L) 8K7525/6 4V7175/4
Adapters
Center (7) 3G1357 (6) 3G3357
Bolts (21) 5P8136 (12) 5P8361
Nuts (21) 8J2933 (12) 5P8362
Corner (R/L) (One-Bolt) 3G5359/8**
Bolts (2) 5P8823
Nuts (2) 5P8362
Corner (R/L) (Two-Bolt) c 8E5359/8**
Bolts (2) 5P8361
Bolts (2) 6V6535
Nuts (4) 3K9770
Tips J350 J350
Short 1U3351 1U3351
Long 1U3352 1U3352
Penetration 9J4359 9J4359
Heavy Duty Long 9N4352 9N4352
Heavy Duty Long Life (ARM) 135-9352 135-9352
Heavy Duty Abrasion 9N4353 9N4353
Heavy Duty Pin 114-0358 114-0358
Heavy Duty Retainer Assembly 114-0359 114-0359
Bolt-On Edges
Standard
Center Sections (2) 1U2408
End Bits (2) 3G6395
(2) 1U1897*
Heavy Duty
End Bits
Bolts (12) 5P8823
Nuts (12) 3K9770
* Optional angled end bit.
** Bolt-On adapters that will accommodate larger tips are available. See “Related Components” table.
a Edge is cancelled and replaced. See “Replacement Edge” table.
b Use 5P8248 washers on dozer assembly.
c Must install 8E5310/11 bucket corners.
315
Loaders
977
316
Loaders
973
317
Loaders
973
MULTI-PURPOSE BUCKETS
Bucket Arrangement 5V2742 5V2742 5V2742
Bucket Group 5G7305 5V2744 9V4315
Width — inches 106.7 102.8 102.8
mm 2710 2610 2610
Dozer Assembly 5G7314 7V0995 9V5670
Cutting Edge 4T8374
Center 9W8335 4T8379
Ends (2) 4T8353 (2) 4T8353
Bolts (17) 5J4771 (10) 5J4771 (17) 5J4771
Nuts (17) 2J3506 (10) 2J3506 (17) 2J3506
Bowl Assembly 5G7306 7V0911 9V5107
Base Edge 5G7303** 5V0600* 5V0600*
Corners (R/L) 4V7175/4 4V7175/4 4V7175/4
Adapters
Center (6) 3G3357 (6) 3G3357 (6) 3G3357
Bolts (12) 5P8361 (12) 5P8361 (12) 5P8361
Nuts (12) 5P8362 (12) 5P8362 (12) 5P8362
Corner (R/L) (One-Bolt) 3G5359/8 3G5359/8 3G5359/8
Bolts (2) 5P8823 (2) 5P8823 (2) 5P8823
Nuts (2) 5P8362 (2) 5P8362 (2) 5P8362
Corner (R/L) (Two-Bolt) a 8E5359/8 8E5359/8 8E5359/8
Bolts (2) 5P8361 (2) 5P8361 (2) 5P8361
Bolts (2) 6V6535 (2) 6V6535 (2) 6V6535
Nuts (4) 3K9770 (4) 3K9770 (4) 3K9770
Tips J350 J350 J350
Short 1U3351 1U3351 1U3351
Long 1U3352 1U3352 1U3352
Penetration 9J4359 9J4359 9J4359
Heavy Duty Long 9N4352 9N4352 9N4352
Heavy Duty Long Life (ARM) 135-9352 135-9352 135-9352
Heavy Duty Abrasion 9N4353 9N4353 9N4353
Heavy Duty Pin 114-0358 114-0358 114-0358
Heavy Duty Retainer Assembly 114-0359 114-0359 114-0359
Bolt-On Edges
Center Sections (2) 9W8334 (2) 1U0591 (2) 1U0591
End Bits (2) 3G6395 (2) 3G6395 (2) 3G6395
(2) 1U1897# (2) 1U1897# (2) 1U1897#
Bolts (12) 5P8823 (12) 5P8823 (12) 5P8823
Nuts (12) 3K9770 (12) 3K9770 (12) 3K9770
* For bolt-on segments use optional 6W2982 edge.
** For bolt-on segments use optional 5G7304 edge.
a Must install 8E5310/11 bucket corners.
# Optional angled end bit.
318
Loaders
973
ROCK BUCKET
Model 973
Bucket Assembly 5V7346
Edge Type Spade
Width — inches 106.5
Width — mm 2705
Base Edge Assembly 9V0178
Base Edge 9V0171◊
Corners (R/L) 8K7525/6
Adapters♦
Center♦ (4) 1U1350
RH (2) 1U1351
LH (2) 1U1352
Tips J350
Short 1U3351
Long 1U3352
Penetration 9J4359
Heavy Duty Long 9N4352
Heavy Duty Long Life (ARM) 135-9352
Heavy Duty Abrasion 9N4353
Heavy Duty Pin 114-0358
Heavy Duty Retainer Assembly 114-0359
Rear Wear Plates (2) 7V0910
Bolts (8) 5J4773
Nuts (8) 2J3506
Washers (8) 5P8248
◊ For segments or bolt-on edges, use 6W2994 base edge.
SLAG BUCKET
Bucket Assembly 5V7344 5V7344
Width — inches 106.85
Width — mm 2714
Base Edge Assembly 137-6264
Base Edge 9V0255 9V0255
Corners (R/L) (2) 7V7941 (2) 7V7941
Adapters
Center (6) 8E3464♦ (6) 114-0464
Rear Tips
Short 9W8451 9W8451
Long 9W8452 9W8452
Penetration 9W8459 9W8459
Heavy Duty Long 9N4452 9N4452
Heavy Duty Long Life (ARM) 101-9054 101-9054
Heavy Duty Abrasion 9N4453 9N4453
Heavy Duty Pin 114-0468♦ 114-0464
Heavy Duty Retainer Assembly 107-3469♦ 107-3469
♦ Note: If spot replacing a few adapters, use J450 adapter with 6Y2527 pin and 8E6359 retainer assembly. However, at base cutting
edge wearout/replacement time, upgrade to J460 adapter with pin and retainer assembly. Make sure to match the pin and retainer
assembly with the size of the adapters used on the bucket. See page 301 or IRM 91-8.
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
319
Loaders
973
320
Loaders
973
321
Loaders
972G
322
Loaders
972G
ROCK BUCKETS
Model 972G 972G
Bucket Assembly 148-6913 148-6911
148-6912 148-6910
148-6908
Edge Type Spade Spade
Width — inches 128.0 128.0
mm 3252 3252
Base Edge Assembly 148-6914
Base Edge 148-6915 154-1604
Sidebars (R/L) (2) 148-6935 (2) 148-6934
Adapters
Heavy Duty
Center (2) 135-9354
RH (3) 135-9355
LH (3) 135-9356
Tips J350
Short 1U3351
Long 1U3352
Penetration 9J4359
Heavy Duty Long 9N4352
Heavy Duty Long Life (ARM) 135-9352
Heavy Duty Abrasion 9N4353
Heavy Duty Penetration 144-1358
HD Pin 114-0358
HD Retainer Assembly 114-0359
Bolt-On Cutting Edges
Standard
RH End 135-8241
RH Center 135-8243
Center 135-8240
LH Center 135-8244
LH End 135-8242
Bolts (18) 8T9079
Nuts (18) 3K9770
Washers (18) 4K0684
Bolt-On Segments
Heavy Duty
Center 135-9294
RH (3) 135-9295
LH (3) 135-9296
Half Arrow
Center 135-9544
RH (3) 135-9545
LH (3) 135-9546
Bolts (14) 8T9079
Nuts (14) 3K9770
Base Edge Wear Plates
Center 6Y6351 6Y6351
Bolts (4) 6F0196 (4) 6F0196
Nuts (4) 2J3505 (4) 2J3505
Washers (4) 5P8249 (4) 5P8249
Sidebar Protector (4) 135-8246 (4) 135-8246
Pin (8) 135-9292 (8) 135-9292
Retainer Assembly (8) 114-0359 (8) 114-0359
Rear Wear Plates
Bolt-On (2) 161-8573 (2) 161-8573
Bolts (8) 5J4773 (8) 5J4773
Nuts (8) 2J3506 (8) 2J3506
Washers (8) 5P8248 (8) 5P8248
323
Loaders
970
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
324
Loaders
970
325
Loaders
966
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
326
Loaders
966
327
Loaders
966
328
Loaders
966
MULTI-PURPOSE BUCKETS
Model 966C 966C 966F
Bucket Arrangement 1V6370 5V7338 7Q8337
Bucket Group 1V7289 5V7339
Width — inches 115.0 112.1 119.6
mm 2921 2848 3078
Dozer Assembly 6K1409 6K1409 73813**
Cutting Edge
Center 4T8378 4T8378 12783**
Ends (2) 4T8381 (2) 4T8381 4T8381
Bolts (19) 4F7827 (19) 4F7827 (19) 4F7827
Nuts (19) 5P8248 (19) 5P8248 (19) 5P8248
Bowl Assembly 1V7059 7V0739 79232**
Base Edge 8K9754 a 6W2989 9V6575
Corners (R/L) 8K7525/6 5V2772/3
Adapters
Center (8) 3G5307 (6) 3G7357 (6) 3G3357
Bolts (24) 5P8136 (12) 5P8361 (12) 5P8361
Nuts (24) 8J2933 (12) 5P8362 (12) 5P8362
Corner (R/L) (One-Bolt) 3G5359/8 3G5359/8
Bolts (2) 5P8823 (2) 5P8823
Nuts (2) 5P8362 (2) 5P8362
Corner (R/L) (Two-Bolt) b 8E5359/8 8E5359/8
Bolts (2) 6V6535 (2) 6V6535
Bolts (2) 5P8361 (2) 5P8361
Nuts (4) 3K9770 (4) 3K9770
Tips J300 J350 J350
Short 1U3301 1U3351 1U3351
Long 1U3302 1U3352 1U3352
Penetration 9J4309 9J4359 9J4359
Heavy Duty Long 9N4302 9N4352 9N4352
Heavy Duty Long Life (ARM) 125-8302 135-9352 135-9352
Heavy Duty Abrasion 9N4303 9N4353 9N4353
HD Pin 132-4766 114-0358 114-0358
HD Retainer Assembly 149-5733 114-0359 114-0359
Bolt-On Edges
Standard — Center Sections (2) 1U2407 (2) 1U0593
End Bits (2) 3G6395 (2) 3G6395
(2) 1U1897* (2) 1U1897
Bolts (12) 5P8823 (12) 5P8823
Nuts (12) 3K9770 (12) 3K9770
Heavy Duty — Center Sections (2) 135-9532 (2) 100-4046
End Bits (2) 100-4044 (2) 100-4044
Abrasion Resistant (ARM)
Center Section 9W3477/8
End Bits 123-0336/7
Bolts (12) 5P8823
Nuts (12) 3K9770
Corner Protectors (R/L) b 173-5426/7 173-5426/7
Bolts (4) 6V6535 (4) 6V6535
Nuts (4) 3K9770 (4) 3K9770
Bolt-On Segments (7) 4T6698 (7) 4T6699
Heavy Duty Bolt-On Segments (7) 140-6867 (7) 140-6868
Bolts (14) 5P8823 (14) 5P8823
Nuts (14) 3K9770 (14) 3K9770
* Bolt-On adapters that will accommodate larger tips are available. See “Related Components” table.
** Balderson Part Numbers — 800-255-2372.
a Edge is discontinued. See “Replacement Base Edges” chart.
b Requires 8E5320/1 bucket corners.
329
Loaders
966
ROCK BUCKETS
Model 966 966C 966D, E 966D, E
Bucket Assembly 9V1807 7K1075 5V5464 5V6215
Edge Type Spade Spade Spade Spade
Width — inches 113.0 113.0 121.5 113.0
mm 2870 2870 3085 2870
Base Edge Assembly 9V0175◊ 7K1010◊ b 9V0176*
Base Edge 9V0174** 7K1158 b 9V0170 9V0170
Corners (R/L) 4K9757/8 4K9757/8 8K7525/6 8K7525/6
Adapters
Center (2) 1U1350 (6) 6K7850 (2) 1U1350
RH (3) 1U1351 (3) 1U1351
LH (3) 1U1352 (3) 1U1352
Tips J350 J350
Short 1U3351 5K4997 1U3351
Long 1U3352 4K4962 1U3352
Penetration 9J4359 9J4359
Heavy Duty Long 9N4352 9N4352
Heavy Duty Long Life (ARM) 135-9352 135-9352
Heavy Duty Abrasion 9N4353 9N4353
Pin 4K0033
Retainer Assembly 4K0006 a
Heavy Duty Pin 114-0358 114-0358
Heavy Duty Retainer Assembly 114-0359 114-0359
* For segments or bolt-on edges, use 6W2993 base edge.
** Consists of edge and weld-on corners.
◊ Consists of edge, corners and adapters.
a Retainer only.
b Edge is discontinued. See “Replacement Base Edges” chart.
330
Loaders
966
331
Loaders
966
332
Loaders
966
PENETRATION BUCKETS
Model 966D, E, F
Bucket Assembly 6W5352, 8R8206
Edge Type FMT
Width — inches 119.7
mm 3040
Base Edge Assembly 6W5520
Adapters (8) 1U1354
Tips J350
Short 1U3351
Long 1U3352
Penetration 9J4359
Heavy Duty Long 9N4352
Heavy Duty Long Life (ARM) 135-9352
Heavy Duty Abrasion 9N4353
Heavy Duty Pin 114-0358
Heavy Duty Retainer Assembly 114-0359
FMT — Flushmounted Teeth
333
Loaders
966
334
Loaders
966
335
Loaders
963
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
336
Loaders
963
MULTI-PURPOSE BUCKETS
Model 963 963 963B
Bucket Arrangement 3V8710 8V7364 8Y9625
Bucket Group 3V8704 8V7367 8Y9626
Width — inches 89.6 97.7 97.7
mm 2276 2482 2482
Capacity — yd3 2.5
m3 1.9
Dozer Assembly 4V4926 9V1437 110-4429
Cutting Edge
Center 4T8081 4T8084 4T8084
Ends (2) 4T8085 (2) 4T8085
Bolts (14) 3F5108 (17) 3F5108 (17) 3F5108
Nuts (14) 1D4720 (17) 1D4720 (17) 1D4720
Bowl Assembly 4V4967 9V1085 8Y9782
Edge Type CGS CGS CGS
Base Edge 4V4958◊ 4V3174◊◊ 6W2980
Corners (R/L) (One-Bolt) 5V1783/4 5V1783/4 5V1784/3
Corners (R/L) (Two-Bolt) 8E5300/1 8E5300/1 8E5300/1
Adapters
Center (6) 4T4307 (6) 4T4307 4T4307
Bolts (12 5P8136 (12) 5P8136 (12) 5P8136
Nuts (12) 8J2933 (12) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4309/8 3G4309/8 3G4309/8
Bolts (2) 5P8823 (2) 5P8823 (2) 5P8823
Nuts (2) 5P8362 (2) 5P8362 (2) 5P8362
Corner (R/L) (Two-Bolt) 8E5309/8 8E5309/8 8E5309/8
Bolts (2) 8T9079 (2) 8T9079 (2) 8T9079
Bolts (2) 6V8360 (2) 6V8360 (2) 6V8360
Nuts (4) 3K9770 (4) 3K9770 (4) 3K9770
Tips J300 J300 J300
Short 1U3301 1U3301 1U3301
Long 1U3302 1U3302 1U3302
Penetration 9J4309 9J4309 9J4309
Heavy Duty Long 9N4302 9N4302 9N4302
Heavy Duty Long Life (ARM) 125-8302 125-8302 125-8302
Heavy Duty Abrasion 9N4303 9N4303 9N4303
HD Pin 132-4766 132-4766 132-4766
HD Retainer Assembly 149-5733 149-5733 149-5733
Bolt-On Edges
Center Sections (2) 1U0599 (2) 1U0600 (2) 1U0600
End Bits (2) 4T8101 (2) 4T8101 (2) 4T8101
(2) 1U1898* (2) 1U1898* (2) 1U1898*
Bolts (12) 4F4042 (12) 4F4042 (12) 4F4042
Nuts (12) 2J3507 (12) 2J3507 (12) 2J3507
Bolt-On Segments (7) 4T6694
Bolts (14) 4F4042
Nuts (14) 2J3507
CGS — Corner Guard System
* Optional angled end bits.
◊ For bolt-on segments use optional 6W2979 edge segments listed on p. 332.
◊◊ For bolt-on segments use optional 6W2980 edge.
NOTE: For corner protectors see 4V6519 bucket, page 336.
337
Loaders
963
338
Loaders
962
GENERAL MATERIAL
PURPOSE HANDLING ROCK
BUCKETS BUCKETS BUCKETS
Model 962G 962G 962G 962G
Bucket Assembly 148-7243 141-9397 148-7245 148-7247
141-9395 141-9398 139-2551
141-9394 141-9399
Edge Type CGS CGS Spade Spade
Width — inches 115 115 116.8 116.8
mm 2921 2921 2969 2969
Base Edge Assembly 141-8824
Base Edge 141-4847 141-4847 141-8823 142-9406
Corners 8E5300/1 8E5300/1 (2) 6W3468 (2) 6W3468
Adapters
Center (6) 4T4307 (6) 4T4307 (2) 1U1350
RH (3) 1U1351
LH (3) 1U1352
Bolts (12) 5P8136 (12) 5P8136
Nuts (12) 8J2933 (12) 8J2933
Corner (R/L) (Two-Bolt) 8E5909/8 8E5909/8
Bolts (2) 8T9079 (2) 8T9079
Bolts (2) 5P8823 (2) 5P8823
Nuts (4) 3K9770 (4) 3K9770
Tips J300 J300 J350
Short 1U3301 1U3301 1U3351
Long 1U3302 1U3302 1U3352
Penetration 9J4309 9J4309 9J4359
Heavy Duty Long 9N4302 9N4302 9N4352
Heavy Duty Long Life (ARM) 125-8302 125-8302 135-9352
Heavy Duty Abrasion 9N4303 9N4303 9N4353
Heavy Duty Penetration 135-9300 135-9300 144-1358
HD Pin 132-4766 132-4766 114-0358
HD Retainer Assembly 149-5733 149-5733 114-0359
Bolt-On Edges
RH End 109-9017
RH Center 7T5963
Center 132-1089
LH Center 7T5961
LH Edge 109-9016
Bolts (18) 8T9079
Nuts (18) 3K9770
Washers (18) 4K0684
Standard — 1.25" (30 mm)
Center Section (2) 139-9230 (2) 139-9230
End Bits (2) 4T8101 (2) 4T8101
Angled End Bits (2) 1U1898 (2) 1U1898
Heavy Duty — 1.5" (35 mm)
Center Section (2) 135-9666 (2) 135-9666
End Bits (2) 132-1033 (2) 132-1033
Abrasion Resistant (ARM)
Center Section 138-0672/3 138-0672/3
End Bits 9W3488/9 9W3488/9
Bolts (12) 4F4042 (12) 4F4042
Nuts (12) 2J3507 (12) 2J3507
Corner Protectors (R/L) 173-5424/5 173-5424/5
Bolts (4) 8T9079 (4) 8T9079
Nuts (4) 3K9770 (4) 3K9770
Bolt-On Segments (7) 132-4715 (7) 132-4715
Bolts (14) 4F4042 (14) 4F4042
Nuts (14) 2J3507 (14) 2J3507
Rear Wear Plates (2) 9W6747 (2) 9W6747 (2) 9W6747 (2) 9W6747
Bolts (8) 4F7827 (8) 4F7827 (8) 4F7827 (8) 4F7827
Nuts (8) 2J3506 (8) 2J3506 (8) 2J3506 (8) 2J3506
Washers (8) 5P8248 (8) 5P8248 (8) 5P8248 (8) 5P8248
CGS — Corner Guard System
339
Loaders
960
MATERIAL GENERAL
HANDLING BUCKETS PURPOSE BUCKETS
Model 960F 960F 960F 960F
Bucket Assembly 107-0582 109-3640 7I3106 109-3637
109-3639 105-2956
Edge Type CGS CGS CGS CGS
Width — inches 108 108 108 108
mm 2743 2743 2743 2743
Base Edge Assembly
Base Edge 9V6575 9V6573 9V6575 9V6573
Corners 4V7174/5 8E5300/1 4V7174/5 8E5300/1
Adapters
Center (6) 3G3357 (6) 4T4307 (6) 3G3357 (6) 4T4307
Bolts (12) 5P8361 (12) 5P8136 (12) 5P8361 (12) 5P8136
Nuts (12) 5P8362 (12) 8J2933 (12) 5P8362 (12) 8J2933
Corner (R/L) (One-Bolt) 3G5359/8 3G5359/8
Bolts (2) 5P8823 (2) 5P8823
Nuts (2) 5P8362 (2) 5P8362
Corner (R/L) (Two-Bolt) (2) 8E5359/8 a 8E5309/8 (2) 8E5359/8 a 8E5309/8
Bolts (2) 5P8361 (2) 8T9079 (2) 5P8361 (2) 8T9079
Bolts (2) 6V6535 (2) 6V8360 (2) 6V6535 (2) 6V8360
Nuts (4) 3K9770 (4) 3K9770 (4) 3K9770 (4) 3K9770
Tips J350 J300 J350 J300
Short 1U3351 1U3301 1U3351 1U3301
Long 1U3352 1U3302 1U3352 1U3302
Penetration 9J4359 9J4309 9J4359 9J4309
Heavy Duty Long 9N4352 9N4302 9N4352 9N4302
Heavy Duty Long Life (ARM) 135-9352 125-8302 135-9352 125-8302
Heavy Duty Abrasion 9N4353 9N4303 9N4353 9N4303
HD Pin 114-0358 132-4766 114-0358 132-4766
HD Retainer Assembly 114-0359 149-5733 114-0359 149-5733
Bolt-On Edges
Standard — Center Section (2) 1U0593 (2) 1U0601 (2) 1U0593 (2) 1U0601
End Bits (2) 3G6395 (2) 4T8101 (2) 3G6395 (2) 4T8101
Heavy Duty — Center Section (2) 100-4046 (2) 132-1034 (2) 100-4046 (2) 132-1034
End Bits (2) 100-4044 (2) 132-1033 (2) 100-4044 (2) 132-1033
Abrasion Resistant (ARM)
Center Section 9W3477/8 9W3492/3 9W3477/8 9W3492/3
End Bits 123-0336/7 9W3488/9 123-0336/7 9W3488/9
Bolts (12) 5P8823 (12) 4F4042 (12) 5P8823 (12) 4F4042
Nuts (12) 3K9770 (12) 2J3507 (12) 3K9770 (12) 2J3507
Corner Protectors (R/L) 173-5426/7 a 173-5424/5 173-5426/7 a 173-5424/5
Bolts (4) 6V6535 (4) 8T9079 (4) 6V6535 (4) 8T9079
Nuts (4) 3K9770 (4) 3K9770 (4) 3K9770 (4) 3K9770
Rear Wear Plates
Bolt-On (2) 9W6747 (2) 9W6747
Bolts (8) 4F7827 (8) 4F7827
Nuts (8) 2J3506 (8) 2J3506
Washers (8) 5P8248 (8) 5P8248
Weld-On (1) 107-1798 (1) 6W4572 (4) 9V2899 (4) 9V2899
CGS — Corner Guard System
a Must install 8E5310/11 corners.
340
Loaders
960
ROCK BUCKETS
Model 960F 960F
Bucket Assembly 8R8618 8R8619
Edge Type Spade Spade
Width — inches 111 111
mm 2819 2819
Base Edge Assembly 6W9879
Base Edge 6W2973 9C0967
Corners (2) 6W3468 (2) 6W3468
Adapters
Center (2) 1U1350
RH (3) 1U1351
LH (3) 1U1352
Tips J350
Short 1U3351
Long 1U3352
Penetration 9J4359
Heavy Duty Long 9N4352
Heavy Duty Long Life (ARM) 135-9352
Heavy Duty Abrasion 9N4353
Heavy Duty Penetration 144-1358
Heavy Duty Pin 114-0358
Heavy Duty Retainer Assembly 114-0359
Bolt-On Edges
RH End 7T5960
RH Center 7T5963
Center 7T5962
LH Center 7T5961
LH End 7T5964
Bolts (18) 8T9679
Nuts (18) 3K9770
Washers (18) 4K0684
Rear Wear Plates (2) 9W6747 (2) 9W6747
Bolts (8) 4F7827 (8) 4F7827
Nuts (8) 2J3506 (8) 2J3506
Washers (8) 5P8248 (8) 5P8248
341
Loaders
955
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
342
Loaders
955
343
Loaders
955
MULTI-PURPOSE BUCKETS
Bucket Arrangement 9K8817 5V7259
Bucket Group 9K8623 5V7260
Width — inches 91.1 88.4
mm 2314 2245
Dozer Assembly 9K8622 9K8622
Cutting Edge
Center 6K4084 4T8074
Bolts (14) 3F5108 (14) 3F5108
Nuts (14) 1D4720 (14) 1D4720
Bowl Assembly 9K8618 5V7261
Base Edge 9K0658 b 6W2978
Corners (R/L) 8K7525/6 5V1783/4
Corners (R/L) (Two-Bolt) 8E5300/1
Adapters
Center (8) 1U0307 (6) 4T4307
Bolts (16) 8J2928 (12) 5P8136
Nuts (16) 8J2933 (12) 8J2933
Corner (R/L) (Two-Bolt) 8E5309/8 a
Bolts (2) 8T9079
Bolts (2) 6V8360
Nuts (4) 3K9770
Tips J300 J300
Short 1U3301 1U3301
Long 1U3302 1U3302
Penetration 9J4309 9J4309
Heavy Duty Long 9N4302 9N4302
Heavy Duty Long Life (ARM) 125-8302 125-8302
Heavy Duty Abrasion 9N4303 9N4303
HD Pin 132-4766 132-4766
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Center Sections (2) 1U2410
End Bits (2) 4T8101
(2) 1U1898*
Bolts (12) 4F4042
Nuts (12) 2J3507
Corner Protectors (R/L) a 173-5424/5
Bolts (4) 8T9079
Nuts (4) 3K9770
* Optional angled end bit.
a One-bolt corner uses 3G4309/8 adapters.
b Edge is discontinued. See “Replacement Base Edges” chart.
344
Loaders
955
345
Loaders
953
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
346
Loaders
953
347
Loaders
953
MULTI-PURPOSE BUCKETS
Model 953 953 953 B/C
Bucket Arrangement 3V6114 8V7365 8Y9582**
Bucket Group 3V6081 8V7366 8Y9583
Width — inches 87.0 93.6 93.6
Width — mm 2210 2378 2378
Dozer Assembly 3V6080 8V9696 9C0986
Cutting Edge
Center 4T8080 4T8083 4T8083
Ends (2) 4T8082 (2) 4T8082
Bolts (14) 4F3654 (17) 4F3654 (17) 4F3654
Nuts (14) 1D4720 (17) 1D4720 (17) 7X0448
Bowl Assembly 3V6113 8V9677 8Y9584
Edge Type CGS CGS CGS
Base Edge 4V8850◊ 5V4670◊◊ 9V6572
Corners (R/L) 4V1544/5 4V1544/5 4V1544/5
Adapters
Center (6) 1U0257 (6) 1U0257 (6) 1U0257
Bolts (12) 5P8136 (12) 5P8136 (12) 8J2928
Nuts (12) 8J2933 (12) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4259/8 3G4259/8 3G4259/8
Bolts (2) 4J9058 (2) 4J9058 (2) 4J9058
Nuts (2) 8J2933 (2) 8J2933 (2) 8J2933
Corner (R/L) (Two-Bolt) a 6I9251/0 6I9251/0 6I9251/0
Bolts (2) 4F4042 (2) 4F4042 (2) 4F4042
Bolts (2) 4J9208 (2) 4J9208 (2) 4J9208
Nuts (4) 2J3507 (4) 2J3507 (4) 2J3507
Tips J250 J250 J250
Short 1U3251 1U3251 1U3251
Long 1U3252 1U3252 1U3252
Penetration 9J4259 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253 9N4253
HD Pin 132-4763 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733 149-5733
Bolt-On Segments (7) 4T6694
Heavy Duty Bolt-On Segments (7) 132-1035
Bolts (14) 1J5607
Nuts (14) 2J3507
Bolt-On Edges
Center Sections (2) 1U0293 (2) 1U0295 (2) 1U0295
End Bits (2) 4T8091 (2) 4T8091 (2) 4T8091
(2) 1U1896* (2) 1U1896* (2) 1U1896*
Bolts (10) 1J5607 (10) 1J5607 (10) 1J5607
Nuts (10) 2J3507 (10) 2J3507 (10) 2J3507
Abrasion Resistant (ARM)
Center 9W3486/7
End Bits 9W3481/2
Bolts (10) 1J5607
Nuts (10) 2J3507
Corner Protectors (R/L) a 173-5422/3 173-5422/3 173-5422/3
Bolts (4) 4F4042 (4) 4F4042 (4) 4F4042
Nuts (4) 2J3507 (4) 2J3507 (4) 2J3507
CGS — Corner Guard System
* Optional angled end bit.
** Includes hydraulic cylinders, lines and mountings.
◊ For bolt-on segments, use optional 9V6570 base edge. See “Related Components” chart.
◊◊ For bolt-on segments, use optional 9V6572 base edge. See “Related Components” chart.
a Must install 6I8310/11 bucket corners.
348
Loaders
953
349
Loaders
951
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
350
Loaders
951
351
Loaders
951
MULTI-PURPOSE BUCKETS
Bucket Arrangement 9K3847 5V4666
Bucket Group 9K3846 5V4665
Width — inches 81.7 79.8
mm 2076 2026
Dozer Assembly 9K3845 9K3845
Cutting Edge 4T8073 4T8073
Bolts (13) 4F3654 (13) 4F3654
Nuts (13) 1D4720 (13) 1D4720
Bowl Assembly 9K3729 5V4672
Base Edge Assembly
Base Edge 8K6452** 6W2977
Corners (R/L) 8K6455/6 4V1544/5
Adapters
Center (8) 1U0257 (6) 1U0257
Bolts (16) 5P8136 (12) 5P8136
Nuts (16) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4259/8
Bolts (2) 4J9058
Nuts (2) 8J2933
Corner (R/L) (Two-Bolt) a 6I9251/0
Bolts (2) 4F4042
Bolts (2) 4J9208
Nuts (4) 2J3507
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Center Sections (2) 1U1467 (2) 1U0605
End Bits (2) 4T8091
(2) 1U1896*
Bolts (8) 1J5607 (10) 1J5607
Nuts (8) 2J3507 (10) 2J3507
Corner Protectors (R/L) a 173-5422/3
Bolts (4) 4F4042
Nuts (4) 2J3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I8310/11 bucket corners.
352
Loaders
951
353
Loaders
950
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
354
Loaders
950
355
Loaders
950
356
Loaders
950
MATERIAL PENETRATION
HANDLING BUCKETS BUCKETS
Model 950G 950B, E, F
Bucket Assembly 141-9396 6W4600
141-9397 8R8617
Edge Type CGS FMT
Width — inches 115 108.0
mm 2921 2744
Base Edge Assembly 6W4599
Base Edge 141-4847 6W4598
Corners (R/L) 8E5300/1
Adapters
Center (6) 4T4307 (8) 1U1304
Bolts (12) 5P8136
Nuts (12) 8J2933
Corner (R/L) (Two-Bolt) 8E5309/8
Bolts (2) 8T9079
Bolts (2) 5P8823
Nuts (4) 3K9770
Tips
Short 1U3301 1U3301
Long 1U3302 1U3302
Penetration 9J4309 9J4309
Heavy Duty Long 9N4302 9N4302
Heavy Duty Long Life (ARM) 125-8302 125-8302
Heavy Duty Abrasion 9N4303 9N4303
HD Pin 132-4766 132-4766
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Standard — 1.25" (30 mm)
Center Sections (2) 139-9230
End Bits (2) 4T8101
Angled End Bits (2) 1U1898
Heavy Duty — 1.5" (35 mm)
Center Sections (2) 135-9666
End Bits (R/L) (2) 132-1033
Abrasion Resistant (ARM)
Center Sections 138-0672/3
End Bits (R/L) 9W3489/8
Bolts (12) 4F4042
Nuts (12) 2J3507
Corner Protectors (R/L) 173-5424/5
Bolts (4) 8T9079
Nuts (4) 3K9770
Bolt-On Segments (7) 132-4715
Bolts (14) 4F4042
Nuts (14) 2J3507
Rear Wear Plates
Bolt-On (2) 9W6747
Weld-On 6W4572
Bolts (8) 4F7827
Nuts (8) 2J3506
Washers (8) 5P8248
CGS — Corner Guard System
357
Loaders
950
MULTI-PURPOSE BUCKETS
Model 950 950
Bucket Arrangement 1V9785 5V7272
Bucket Group 2V3160 5V7273
Width — inches 105.8 104.3
mm 2686 2648
Dozer Assembly 2V5139 2V5139
Cutting Edge
Center 4T8068 4T8068
Ends (2) 4T8078 (2) 4T8078
Bolts (20) 4F3654 (20) 4F3654
Nuts (20) 1D4720 (20) 1D4720
Bowl Assembly 2V2007 5V7274
Base Edge 8K8162** 6W2988
Corners (R/L) 8K6455/6 5V7396/5
Adapters
Center (10) 1U0307 (6) 1U0307
Bolts (20) 8J2928 (12) 8J2928
Nuts (20) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4309/8
Bolts (2) 6V6535
Nuts (2) 5P8362
Corner (R/L) (Two-Bolt) a 8E5309/8
Bolts (2) 8T9079
Bolts (2) 5P8823
Nuts (4) 3K9770
Tips J300 J300
Short 1U3301 1U3301
Long 1U3302 1U3302
Penetration 9J4309 9J4309
Heavy Duty Long 9N4302 9N4302
Heavy Duty Long Life (ARM) 125-8302 125-8302
Heavy Duty Abrasion 9N4303 9N4303
HD Pin 132-4766 132-4766
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Standard
Center Sections 1U1470 (2) 1U2413
End Bits (2) 1U1469 (2) 4T8101
(2) 1U1898*
Heavy Duty
Center Sections 132-1031 (2) 132-1032
End Bits (2) 132-1033 (2) 132-1033
Bolts (10) 1J5607 (12) 4F4042
Nuts (10) 2J3507 (12) 2J3507
Abrasion Resistant (ARM)
Center Sections 9W3466
End Bits 9W3467/8
Bolts (10) 1J5607
Nuts (10) 1J5607
Corner Protectors (R/L) a 173-5424/5
Bolts (4) 8T9079
Nuts (4) 3K9770
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 8E5302/3 bucket corners.
358
Loaders
950
ROCK BUCKETS
Model 950B, E, F 950B, E, F 950G 950G
Bucket Assembly 6W1136 6W1137 141-9400 141-9401
8R8618 8R8619
Edge Width Spade Spade Spade Spade
Width — inches 110.8 110.8 117.0 116.8
mm 2815 2815 2972 2969
Base Edge Assembly 6W9879 141-8824
Base Edge 6W2973 9C0967 141-8823 142-9406
Corners (2) 6W3468 (2) 6W3468 (2) 6W3468 (2) 6W3468
Adapters
Center (2) 1U1350 (2) 1U1350
RH (3) 1U1351 (3) 1U1351
LH (3) 1U1352 (3) 1U1352
Tips J350 J350
Short 1U3351 1U3351
Long 1U3352 1U3352
Penetration 9J4359 9J4359
Heavy Duty Long 9N4352 9N4352
Heavy Duty Long Life (ARM) 135-9352 135-9352
Heavy Duty Abrasion 9N4353 9N4353
Heavy Duty Penetration 144-1358 144-1358
Heavy Duty Pin 114-0358 114-0358
Heavy Duty Retainer Assembly 114-0359 114-0359
Bolt-On Edges
RH End 7T5960 109-9017
RH Center 7T5963 7T5963
Center 7T5962 132-1089
LH Center 7T5961 7T5961
LH End 7T5964 109-9016
Bolts (18) 8T9079 (18) 8T9079
Nuts (18) 3K9770 (18) 3K9770
Washers (18) 4K0684 (18) 4K0684
Rear Wear Plates (2) 9W6747 (2) 9W6747 (2) 9W6747 (2) 9W6747
(8) 4F7827 (8) 4F7827 (8) 4F7827 (8) 4F7827
(8) 2J3506 (8) 2J3506 (8) 2J3506 (8) 2J3506
(8) 5P8248 (8) 5P8248 (8) 5P8248 (8) 5P8248
359
Loaders
950
360
Loaders
950
361
Loaders
943
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
362
Loaders
943
MULTI-PURPOSE BUCKETS
Bucket Arrangement 2V7274 8V7363
Bucket Group 2V7193 8V7359
Width — inches 82.1 88.8
mm 2086 2256
Dozer Assembly 2V7183 8V7942
Cutting Edge
Center 4T8079 4T8072
Ends (2) 4T8082
Bolts (13) 4F3654 (16) 4F3654
Nuts (13) 1D4720 (16) 1D4720
Bowl Assembly 2V7195 8V7628
Base Edge 4V8335◊ 8V7453◊◊
Corners (R/L) 4V1544/5 4V1544/5
Adapters
Center (6) 1U0257 (6) 1U0257
Bolts (12) 5P8136 (12) 5P8136
Nuts (12) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4259/8 3G4259/8
Bolts (2) 4J9058 (2) 4J9058
Nuts (2) 8J2933 (2) 8J2933
Corner (R/L) (Two-Bolt) a 6I9251/0 6I9251/0
Bolts (2) 4F4042 (2) 4F4042
Bolts (2) 4J9208 (2) 4J9208
Nuts (4) 2J3507 (4) 2J3507
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Center Sections (2) 1U0294 (2) 4T9563
End Bits (2) 4T8091 (2) 4T8091
(2) 1U1896* (2) 1U1896*
Bolts (10) 1J5607 (10) 1J5607
Nuts (10) 2J3507 (10) 2J3507
Corner Protectors (R/L) a 173-5422/3 173-5422/3
Bolts (4) 4F4042 (4) 4F4042
Nuts (4) 2J3507 (4) 2J3507
* Optional angled end bits.
◊ For bolt-on segments, use optional 9V6571 base edge. See “Related Components” chart.
◊◊ For bolt-on segments, use optional 6W2976 base edge. See “Related Components” chart.
a Must install 6I8310/11 bucket corners.
363
Loaders
943
364
Loaders
941
365
Loaders
941
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
MULTI-PURPOSE BUCKETS
Bucket Arrangement 9K3753 5V4649
Bucket Group 9K3752 5V4648
Width — inches 81.8 79.8
mm 2076 2026
Dozer Assembly 9K3727 9K3727
Cutting Edge 4T8073 4T8073
Bolts (13) 4F3654 (13) 4F3654
Nuts (13) 1D4720 (13) 1D4720
Bowl Assembly 9K3373 5V4647
Base Edge 8K6452 b 6W2977
Corners (R/L) 8K6455/6 4V1544/5
Adapters
Center (8) 1U0257 (6) 1U0257
Bolts (16) 8J2928 (12) 8J2928
Nuts (16) 8J2933 (12) 8J2933
Corner (R/L) (One-Bolt) 3G4259/8
Bolts (2) 4J9058
Nuts (2) 8J2933
Corner (R/L) (Two-Bolt) a 6I9251/0
Bolts (2) 4F4042
Bolts (2) 4J9208
Nuts (4) 2J3507
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
Bolt-On Edges
Center Section (2) 1U0605
End Bits (2) 4T8091
(2) 1U1896*
Bolts (10) 1J5607
Nuts (10) 2J3507
Corner Protectors (R/L) a 173-5422/3
Bolts (4) 4F4042
Nuts (4) 2J3507
* Optional angled end bits.
a Must install 6I8310/11 bucket corners.
b Edge is discontinued. See “Replacement Base Edges” chart.
366
Loaders
941
367
Loaders
939
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
MULTI-PURPOSE BUCKETS
Bucket Group 8Y8261
Width — inches 85
mm 2160
Dozer Assembly 106-4755
Cutting Edge 106-2327
Bolts (14) 4F3654
Nuts (14) 7X0448
Bowl Assembly 106-2316
Base Edge 8Y8763
Corners (R/L) 4V1544/5
Bolt-On Edges
Center Sections (2) 100-6359
End Bits (2) 4T8091
Angled End Bit (2) 1U1896
Bolts (10) 1J5607
Nuts (10) 2J3507
Corner Protectors (R/L)** 173-5422/3
Bolts (4) 4F4042
Nuts (4) 2J3507
Bolt-On Segments (7) 4T6692
Bolts (14) 1J5607
Nuts (14) 2J3507
368
Loaders
938F/G
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
369
Loaders
938F/G
PENETRATION BUCKETS
Models 938F/G
Bucket Assembly 103-7401
Width — inches 109.2
mm 2774
Base Edge Assembly 106-3192
Base Edge N/A
Adapters
Center (8) 1U1254
Tips
Short 1U3251
Long 1U3252
Penetration 9J4259
Heavy Duty Long 9N4252
Heavy Duty Abrasion 9N4253
HD Pin 132-4763
HD Retainer Assembly 149-5733
Weld-On Rear Wear Plate 106-3239
* Consists of edge and adapters.
370
Loaders
938F/G
371
Loaders
936
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
372
Loaders
936
PENETRATION BUCKETS
Models 936E, F 936E, F
Bucket Assembly 9C4828 103-7401
9V9522
Width — inches 107.5 109.2
mm 2731 2744
Base Edge Assembly 9V9521◊ 106-3192
Base Edge 9V9072 N/A
Adapter
Center (8) 1U1254 (8) 1U1254
Tips
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 133-0699 149-5733
Weld-on Rear Wear Plate 106-3239
◊ Consists of edge and adapters.
373
Loaders
936
374
Loaders
935/931
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
375
Loaders
935 / 931
376
Loaders
935 / 931
377
Loaders
935 / 931
378
Loaders
933
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
MULTI-PURPOSE BUCKETS
Bucket Group 110-7541
Width — inches 77.5
mm 1966
Dozer Assembly 110-7542
Cutting Edge 8Y5291
Bowl Assembly 8Y6784
Base Edge 8Y4738 (Weld-On)
Corners (R/L) 5G2807/6
Adapters
Center (6) 6Y6227
Bolts (12) 1J6762
Nuts (12) 2J3506
Corner 6Y6229/8
Bolts (2) 6F0196
Nuts (2) 2J3505
Tips J225
Short 6Y6221
Long 6Y6222
Penetration 8Y8229
Heavy Duty Long 8E4222
Heavy Duty Abrasion 6Y6223
HD Pin 132-4762
HD Retainer Assembly 149-5733
Bolt-On Edges
Center Sections 9W9943
End Bits (2) 9W9944
Bolts (8) 4F7827
Nuts (8) 2J3506
Bolt-On Segments (7) 6Y6362
Bolts (14) 4F7827
Nuts (14) 2J3506
379
Loaders
930
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
380
Loaders
930
MULTI-PURPOSE BUCKETS
Bucket Arrangement 9K6717 5V4655
Bucket Group 9K6721 5V4653
Width — inches 96.0 95.3
mm 2438 2419
Dozer Assembly 9K7656 9K7656
Cutting Edge 9K5705 4T8077
Bolts (15) 4F3654 (15) 4F3654
Nuts (15) 1D4720 (15) 1D4720
Bowl Assembly 9K6729 5V4652
Base Edge 8K8161** 6W2984
Corners (R/L) 8K6455/6 4V1544/5
Adapters
Center (9) 1U0257 (6) 1U0257
Bolts (18) 8J2928 (12) 8J2928
Nuts (18) 8J2933 (12) 8J2933
Corners (R/L) (One-Bolt) 3G4259/8
Bolts (2) 4J9058
Nuts (2) 8J2933
Corners (R/L) (Two-Bolt) a 6I9251/50
Bolts (2) 4F4042
Bolts (2) 4J9058
Nuts (4) 2J3507
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
Bolt-On Segments
Standard (5) 4T6694
(2) 4T6693
Heavy Duty (5) 132-1035
(2) 132-1036
Bolts (14) 4F4042
Nuts (14) 2J3507
Bolt-On Edges
Standard
Center Sections 1U1465 (2) 1U0607
End Bits (2) 1U1464 (2) 4T8091
(2) 1U1896*
Heavy Duty
Center Sections 132-1026
End Sections (2) 132-1027
Abrasion Resistant (ARM)
Center Sections 9W3469 (2) 9W3483
End Bits 9W3470/1 9W3481/2
Bolts (9) 1J5607 (10) 1J5607
Nuts (9) 2J3507 (10) 2J3507
Corner Protectors (R/L) a 173-5422/3 173-5422/3
Bolts (4) 4F4042 (4) 4F4042
Nuts (4) 2J3507 (4) 2J3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I8310/11 bucket corners.
381
Loaders
930
382
Loaders
928
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
GENERAL PENETRATION
PURPOSE BUCKETS BUCKETS
Model 928F 928G 928F 928G
Bucket Assembly 4E0091 171-8136 4E0090 171-8138
4E0092 171-8137
Bucket Type GP GP Penetration Penetration
Width — inches 99.7 99.7 102.1 102.1
Width — mm 2532 2532 2593 2593
Base Edge Assembly 4E2482 4E2482
Base Edge 4E0659 4E0659 4E2483 4E2483
Corners (R/L) 4V1544/5 6I8311/0 4E3128/7 (2) 4V8285
Adapters*
Bolt-On
Center (6) 1U0257 (6) 1U0257 (8) 1U1254 (8) 1U1254
Bolts (12) 8J2928 (12) 8J2928 Weld-On Weld-On
Nuts (12) 8J2933 (12) 8J2933 Flushmount Flushmount
Corners (R/L) (One-Bolt) 3G4259/8 3G4259/8
Bolts (2) 4J9058 (2) 4J9058
Nuts (2) 8J2933 (2) 8J2933
Corners (R/L) (Two-Bolt) a 6I9251/0 6I9251/0
Bolts (2) 4F4042 (2) 4F4042
Bolts (2) 4J9058 (2) 4J9058
Nuts (4) 2J3507 (4) 2J3507
Tips J250 J250 J250 J250
Short 1U3251 1U3251 1U3251 1U3251
Long 1U3252 1U3252 1U3252 1U3252
Penetration 9J4259 9J4259 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253 9N4253 9N4253
HD Pin 132-4763 132-4763 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733 149-5733 149-5733
Bolt-On Edges
Standard
Center Section (2) 8E4567 (2) 8E4567
End Bits (2) 4T8091 (2) 4T8091
(2) 1U1896** (2) 1U1896**
Abrasion Resistant (ARM)
Center Sections 135-6728/9 135-6728/9
End Bits 9W3481/2 9W3481/2
Bolts (10) 1J5607 (10) 1J5607
Nuts (10) 2J3507 (10) 2J3507
Corner Protectors (R/L) a 173-5422/3 173-5422/3
Bolts (4) 4F4042 (4) 4F4042
Nuts (4) 2J3507 (4) 2J3507
Bolt-On Segments (7) 8E4569 (7) 8E4569
Bolts (14) 1J5607 (14) 1J5607
Nuts (14) 2J3507 (14) 2J3507
* Upsize (J300) adapters are available. See chart for 6W2984 base edge, page 382.
** Optional angled end bit.
a Must install 6I8310/11 bucket corners.
383
Loaders
926
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKETS
Bucket Assembly 9C4905 4E0090
9V9756
Width — inches 95.9 102.1
mm 2437 2593
Base Edge Assembly 9V9755 4E2482
Base Edge N/A 4E2483
Corners (R/L) 4E3128/7
Adapters
Center (8) 1U1254 (8) 1U1254 Weld-On Flushmount
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
384
Loaders
926
385
Loaders
924F
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
386
Loaders
920
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
387
Loaders
920
MULTI-PURPOSE BUCKETS
Bucket Arrangement 9K5692 5V4659
Bucket Group 9K6159 5V4654
Width — inches 96.0 95.3
mm 2438 2419
Dozer Assembly 9K9508 9K9508
Cutting Edge 4T8077 4T8077
Bolts (15) 4F3654 (15) 4F3654
Nuts (15) 1D4720 (15) 1D4720
Bowl Assembly 9K6161 5V4658
Base Edge 8K8161** 6W2984
Corners (R/L) 8K6455/6 4V1544/5
Adapters
Center (9) 1U0257 (6) 1U0257
Bolts (18) 8J2928 (12) 8J2928
Nuts (18) 8J2933 (12) 8J2933
Corners (R/L) (One-Bolt) 3G4259/8
Bolts (2) 4J9058
Nuts (2) 8J2933
Corners (R/L) (Two-Bolt) a 6I9251/0
Bolts (2) 4F4042
Bolts (2) 4J9058
Nuts (4) 2J3507
Tips J250 J250
Short 1U3251 1U3251
Long 1U3252 1U3252
Penetration 9J4259 9J4259
Heavy Duty Long 9N4252 9N4252
Heavy Duty Abrasion 9N4253 9N4253
HD Pin 132-4763 132-4763
HD Retainer Assembly 149-5733 149-5733
Bolt-On Segments
Standard (5) 4T6694
(2) 4T6693
Heavy Duty (5) 132-1035
(2) 132-1036
Bolts (14) 4F4042
Nuts (14) 2J3507
Bolt-On Edges
Standard
Center Sections 1U1465 (2) 1U0607
End Bits (2) 1U1464 (2) 4T8091
(2) 1U1896*
Heavy Duty
Center Sections 132-1026
End Sections (2) 132-1027
Abrasion Resistant (ARM)
Center Sections 9W3469 (2) 9W3483
End Bits 9W3470/1 9W3481/2
Bolts (9) 1J5607 (10) 1J5607
Nuts (9) 2J3507 (10) 2J3507
Corner Protectors (R/L) 173-5422/3 173-5422/3
Bolts (4) 4F4042 (4) 4F4042
Nuts (4) 2J3507 (4) 2J3507
* Optional angled end bits.
** Edge is discontinued. See “Replacement Base Edges” chart.
a Must install 6I8310/11 bucket corners.
388
Loaders
920
389
Loaders
918F
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKETS
Bucket Assembly 4E1724
Width — inches 95.9
mm 2436
Base Edge Assembly 9V9755
Base Edge N/A
Adapters
Flushmount, Weld-On (8) 1U1254
Tips J250
Short 1U3251
Long 1U3252
Penetration 9J4259
Heavy Duty Long 9N4252
Heavy Duty Abrasion 9N4253
HD Pin 132-4763
HD Retainer Assembly 149-5733
390
Loaders
916
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
391
Loaders
916
PENETRATION BUCKETS
Bucket Assembly 9C4941
9V9795
Width — inches 95.9
mm 2437
Base Edge Assembly 9V9755
Base Edge N/A
Adapters
Flushmount, Weld-On (8) 1U1254
Tips J250
Short 1U3251
Long 1U3252
Penetration 9J4259
Heavy Duty Long 9N4252
Heavy Duty Abrasion 9N4253
HD Pin 132-4763
HD Retainer Assembly 149-5733
392
Loaders
916
393
Loaders
914
PENETRATION BUCKETS
Model 914G
Bucket Assembly 171-8130
Width — inches 95.8
mm 2434
Base Edge Assembly 5G8911
Base Edge 5G8912
Adapters
Flushmount, Weld-On (8) 4T1204
Tips J200
Long 1U3202
Abrasion 4T2203
Penetration 1U3209
Utility 7T8202
Pin 8E6208
Retainer Assembly 8E6209
394
Loaders
910
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKETS
Model 910E, F
Bucket Assembly 7I3194
Width — inches 95.8
mm 2434
Base Edge Assemblya 5G8911
Base Edge 5G8912
Adapters
Flushmount, Weld-On (8) 4T1204
Tips J200
Short 1U3201
Long 1U3202
Abrasion 4T2203
Penetration 1U3209
Pin 8E6208
Retainer Assembly 8E6209
a Consists of edge and weld-on adapters.
395
Loaders
910
MULTI-PURPOSE BUCKETS
Model 910 910
Bucket Arrangement 6S4521 6S4521
Bucket Group 6S4852 5G4085
Width — inches 84.7 82.6
mm 2152 2098
Dozer Assembly 6S4863 6S4863
Cutting Edge 6S4738 6S4738
Weld-On Weld-On
Bowl Assembly 6S6505 5G4084
Base Edge 6S6500* 5G2809
Corners (R/L) 6S3237/8 5G2807/6
Adapters
Center (7) 9J4207 (5) 9J4207
Bolts (14) 5J4771 (10) 5J4771
Nuts (14) 2J3506 (10) 2J3506
Corner (R/L) 1U2209/8
Bolts (2) 6F0196
Nuts (2) 2J3505
Tips J200 J200
Long 1U3202 1U3202
Abrasion 4T2203 4T2203
Penetration 1U3209 1U3209
Pin 8E6208 8E6208
Retainer Assembly 8E6209 8E6209
Bolt-On Edges
Center 4T2920 4T8796
End Sections (2) 4T2918 (2) 4T2914
Bolts (7) 4F7827 (7) 4F7827
Nuts (7) 2J3506 (7) 2J3506
* Edge is discontinued. See “Replacement Base Edges” chart.
396
Loaders
910
397
Loaders
IT12 / IT14 / IT24F / IT26 / IT28 / IT38
398
Loaders
IT12 / IT24 / IT26 / IT28 / IT36 / IT38
399
Loaders
IT12 / IT24F / IT28
Note: Base edges can be upgraded to the latest universal edge that will accept segments. Refer to “Base Edges and
Related Components Available at Replacement Time” for part number information.
PENETRATION BUCKETS
Bucket Assembly 171-8133
171-8135
Width — inches 95.8
mm 2434
Edge Assembly 5G8911
Base Edge 5G8912
Adapters
Flushmount, Weld-On (8) 4T1204
Tips J200
Long 1U3202
Abrasion 4T2203
Penetration 1U3209
Utility 7T8202
Pin 8E6208
Retainer Assembly 8E6209
401
Loaders
* Even though a bucket may fit different machines, there are other factors to consider before interchanging, such as machine performance dif-
ferences and application differences.
** Buckets configured with MFL (maintenance free linkage) pins at the tilt link will NOT interchange with buckets configured with cartridge pins.
† Keep original bucket pins with original machine when interchanging buckets between 980F&C H/L and 980G machines.
‡ Keep original bucket pins with original bucket when interchanging buckets between 914G and 910F machines.
402
Loaders
** Even though a bucket may fit different machines, there are other factors to consider before interchanging, such as machine performance dif-
ferences and application differences.
** The use of 931, 933 and 935 buckets on the 939 is not recommended because they are lighter duty and too narrow. The 933 and 939 bucket-
to-lift-arm pin has a different retention system than the 931 and 935 buckets. If you interchange 933/939 buckets with 931/939, you will have
to use the bucket pin that came with the bucket.
403
Loaders
416 / 426 / 428 / 436 / 438
404
Loaders
416 / 426 / 428 / 436 / 438
405
Loaders
416 / 426 / 428 / 436 / 438
406
Loaders
416 / 426 / 428 / 436 / 438
407
Loaders
416 / 426 / 428 / 436 / 438
408
Loaders
416 / 426 / 428 / 436 / 438
409
Loaders
416 / 426 / 428 / 436 / 438
Width — inches 36 36 36 36
mm 914 914 914 914
Base Edge 134-5882 9R7627 136-6890 9R7627
Base Edge Options
Wrap-Around*
Extended*
Extended** 9R7627
Extended (Holes)**
Extreme Service***
Corners (R/L) 134-5885/4 9R7622/1 (2) 136-6885 9R7622/1
Tooth Options
Weld-On Adapter (6) 8J7526
Bottom Strap 20 mm (6) 8J7525
Two-Strap 20 mm (5) 119-3204 (6) 8J7526
Two-Strap 25 mm
Tip Options
Long 1U3202 1U3202 1U3202 1U3202
Utility 7T8202 7T8202 7T8202 7T8202
Sharp
Corner 9W8208 9W8208 9W8208 9W8208
Center 9W8209 9W8209 9W8209 9W8209
Twin Sharp 135-8208 135-8208 135-8208 135-8208
Wide 109-9200 109-9200 109-9200 109-9200
Abrasion 4T2203 4T2203 4T2203 4T2203
Penetration 1U3209 1U3209 1U3209 1U3209
Pin 8E6208 8E6208 8E6208 8E6208
Retainer Assembly 8E6209 8E6209 8E6209 8E6209
* 0.63" (16 mm) thick.
** 0.80" (20 mm) thick.
*** For use only on 9R9525 or 9R9519 extreme service buckets.
a This part number is a bucket group which includes long tips, pins and retainers.
b High capacity.
410
Loaders
446
411
Loaders
446
MULTI-PURPOSE BUCKETS
Bucket Assembly 6Q0655
Width — inches 94.8
mm 2410
Dozer Assembly 6Q2190
Bowl Assembly 6Q2192
Base Edge 6Q2193
Corners (R/L) 6Q2197/6
Bolt-On Edges (2) 9U9665
Bolts (12) 3F5108
Nuts (12) 4K0367
412
Loaders
** Even though a bucket may fit different machines, there are other factors to consider before interchanging, such as machine performance
differences and application differences.
** Even though a bucket may fit different machines, there are other factors to consider before interchanging, such as machine performance
differences and application differences.
** When fitting 12" wide bucket, use 9R0437 pin, 9R0438 pin, (2) 6V3213 snap rings, (2) 6V4364 snap rings, (2) 9R0158 washers and
(2) 9R1510 washers.
413
Loaders
414
Loaders
ADAPTERS
Two-Strap Bolt-On
Features Benefits
✔ Countersunk bottom to accept plow bolts. ✔ Keeps bolts from loosening or shearing.
✔ Side-pinned at point of greatest strength. ✔ Minimizes tip loss and breakage.
Better accessibility for quick changing.
✔ Adapter and tip are positioned below cutting edge. ✔ Easy digging.
✔ Two-strap design. ✔ Long cutting edge life.
Two-Strap Weld-On
Features Benefits
✔ Welded on both sides of base edge. ✔ Excellent adapter retention.
✔ Side-pinned design. ✔ Minimizes tip loss due to wear or adapter
breakage.
✔ Tip positioned below bottom of cutting edge. ✔ Excellent productivity.
✔ Two-strap design. ✔ Good edge protection.
Flushmounted Weld-on
Features Benefits
✔ Versatile. ✔ Number of teeth that can be welded to the cutting
edge is not restricted.
✔ Adaptable to other than Caterpillar buckets.
✔ Provides flat bucket bottom. ✔ Easy cleanup.
415
Loaders
ADAPTERS — Continued
Features Benefits
✔ No top strap. ✔ Easy loading and dumping because there is no tip
or adapter on top of the cutting edge to obstruct
material flow.
✔ Tip and adapter are positioned below the bucket ✔ Easy digging.
cutting edge.
✔ Thick bottom strap. ✔ Provides excellent cutting edge protection.
✔ Versatile. ✔ Number of teeth that can be welded to the cutting
edge is not restricted.
✔ May be installed in corners of bucket with out
extensive modifications.
✔ Is adaptable to many other than Caterpillar
buckets.
416
Loaders
417
Loaders
418
Loaders
419
Loaders
420
Loaders
421
Loaders
B
C A B A B A
D D
“TWO WAY”
Edge
Thickness Bolt Hole Locations
D A B C Bolt Diameter
inch mm Part No. inch mm inch mm inch mm inch mm Type Short Tip Model
2.00 51 6K3073 6.44 159 2.50 64 5.25 133 1.00 25 1 6K2765 992
1.50 38 6K1964 5.00 127 5.25 133 1.00 25 2 5K2926 980
1.50 38 6K7850 5.00 127 5.25 133 1.00 25 2 5K4997 988, 983
1.25 32 6K2962 4.50 114 2.00 51 5.50 140 0.88 22 1 5K2926 977
1.25 32 6K1965 4.00 102 4.25 108 0.75 19 2 5K2925 966
1.25 32 6K4141 3.00 76 3.50 89 0.88 22 2 5K2926 977, 966
1.25 32 5K9024 4.12 105 5.00 127 0.88 22 2 5K2926 977
1.00 25 6K2563 3.25 83 3.50 89 0.62 16 2 5K2925 951B, 950,
944, 941, 930
1.00 25 8J2929 2.75 70 4.88 124 1.00 25 2 5K2925 955, 951, 950
1.00 25 8J2930 2.75 70 4.88 124 1.00 25 2 5K2924 941, 930, 920
1.00 25 5K6851 4.00 102 6.50 165 0.75 19 3 5K2925 955, 951
1.00 25 6K3960 3.00 76 3.50 89 0.75 19 2 5K2925 955, 951,
950, 944
1.00 25 5K8287 3.38 86 4.38 111 0.75 19 2 5K2925 955
0.75 19 6K3125 3.00 76 3.50 89 0.62 16 2 5K2924 941, 933,
922, 920
* When base edge replacement is required, side-pinned adapters must be used.
422
Loaders
C
D
B A
Type 4
D Type 6
B A
B A
Type 5
D D
Type 4 Type 7
WEDGE-TYPE
Edge
Thickness Bolt Hole Locations
D A B C Bolt Diameter
inch mm Part No. inch mm inch mm inch mm inch mm Type Short Tip Model
1.25 32 2K4568 5.12 130 4.88 124 4.00 102 0.75 19 4 2K4569 977
1.25 32 4K4694 3.18 81 3.50 89 0.88 22 7 2K4569 977
1.25 32 3K5754 3.32 84 3.50 89 0.75 19 6 2K4678 966
1.00 25 3K2843 3.28 83 3.50 89 0.62 16 7 2K4678 944
1.00 25 4K4695 3.28 83 3.50 89 0.75 19 7 2K4678 955
0.75 19 3K6781 3.28 83 3.50 89 0.62 16 6 3K6783 933, 922
0.75 19 4K1633 4.22 107 6.50 165 0.75 19 5 2K4678 955
0.62 16 4K1690 4.19 106 6.50 165 0.62 16 5 2K4678 933
* When base edge replacement is required, side-pinned adapters must be used.
423
Loaders
D
D
Type 1 Type 2
“TWO WAY”
Edge Thickness
D
inch mm Part No. Type Short Tip Model
2.25 57 6K7851 1 6K7852 992
2.00 51 6K6897 1 6K6644 988
1.75 45 6K6949 1 5K4997 980
1.75 45 7K0482 1 6K6644 983
1.50 38 6K2853 2 5K4997 977
WEDGE-TYPE
D Short
inch mm Adapter Tip
1.20 31 5K5442 2K4569
0.94 24 5K5441 2K4678
0.75 19 2K4679 2K4678
424
Loaders
BUCKET TIPS
Current Caterpillar loader bucket tips feature the side pin design. This
provides good retention and fast, simple removal and installation. All
current tips can be used on side-pinned bolt-on adapters, flushmounted,
two-strap or bottom strap weld-on adapters. Tips for 988 and larger
machines are made of DH-3 steel.
Utility Tip
Unitooth • good for most general
• a one-piece tip and adapter Long Tip applications
that bolts to the bucket
• best choice for most jobs • use on back or front backhoe
• use in light-to-medium-duty loader buckets
work • good strength
• self-sharpening • good penetration
• good wear material
425
Loaders
BUCKET
SELECTION GUIDE
TIP
Penetration
Tips
Penetration:
• Use in densely compacted material such as clay.
Short • Gives maximum penetration.
• Self-sharpening.
Short:
• Use in high-impact and pry-out work such as rock.
• Extremely strong.
Long
Long:
• Use in most general applications where breakage is not
a problem.
Abrasion
Abrasion:*
• Use when working in abrasive materials such as sand
or gravel.
• Has added wear material for extended life.
Heavy Duty Long
Heavy Duty Long:
• Use on larger machines in general loading and
excavation work.
• Has longer wear life and greater strength.
Heavy Duty Abrasion
Heavy Duty Abrasion:
• Use on larger machines when working in sand,
gravel and shot rock.
• Maximum wear material.
426
Loaders
Long
For most general applications where breakage is not a problem.
Utility
Good for most applications. Made of through hardened DH-2 steel with no weld joints;
self sharpening.
Abrasion
For use in extremely abrasive conditions. Added material for long service life.
Penetration
For highly compacted material such as clay. Self sharpening.
Sharp
Best penetration but least wear material. Use only when the need for more penetration over-
comes the need for more wear life.
Twin Sharp
Enhanced fracture capability, used in corners or when penetration is less important.
Bolt-on Unitooth
Use in general applications where breakage is not a problem. No adapter required.
427
Loaders
BUCKET TIP OPTIONS
The long tip is the universal tip to start with. If other properties (strength, penetration, abrasion, etc.) become
more important, find the long tip indicated with the base edge in the previous charts and locate it within the tables
below. The different tip options are listed under the long tip.
TIP OPTIONS
Size J200 J225 J250 J300 J350
Long 1U3202 6Y3222 1U3252 1U3302 1U3352
Short 6Y6221 1U3251 1U3301 1U3351
Abrasion 4T2203
Penetration 1U3209 6Y8229 9J4259 9J4309 9J4359
Penetration Plus 183-5300 183-5303
Wide 109-9200 3G8250 107-3300 107-3350
Sharp:
Center 9W8209 6Y7229 9W8259 9W8309 9W2359
Corner 9W8208 6Y7228 9W8258 9W8308 9W2358
Twin Sharp 135-8208 135-8228 135-8258 135-9308 135-9357
Heavy Duty Long 8E4222 9N4252 9N4302 9N4352
Heavy Duty Long Life (ARM) 135-8252 125-8302 135-9352
Heavy Duty Abrasion 6Y6223 9N4253 9N4303 9N4353
Heavy Duty Penetration 135-9300 144-1358
Penetration Long Life (ARM) 125-8309 119-9359
Utility 7T8202
Heavy Duty Pin 8E6208** 132-4762 132-4763 132-4766 114-0358
Heavy Duty Retainer Assembly 8E6209** 149-5733 149-5733 149-5733 114-0359
The majority of the time, the second to last and the third to
last locations in the part number identify the “J” size.
Example: 9W8551
J550
428
Loaders
BUCKET TIP AND ADAPTER OPTIONS PRODUCT DESCRIPTIONS
429
Loaders
430
Loaders
Base Edges
• Look for severe bottom wear or scalloping between teeth. See following
pages on measuring base edges.
• Look for cracks beside adapters and in corner welds.
• Look for cracks on top and bottom of rear weld.
• Small cracks are not critical but should be watched. If they grow, they
should be repaired.
Bolt-On Edges and Bolt-On Segments
• Check for remaining protection in front of base edge. With bolt-on
edges, pay particular attention to the amount of protection remaining at
the front corners of the base edge.
• Look at bolt heads on bottom of bucket. If any are beginning to look
square, replace that segment or bolt-on edge piece.
Adapters, Tips, Pins and Retainer
• With weld-on adapters, check for weld cracks. With bolt-on adapters,
check for loose hardware.
• Check for adapters with badly worn bottom straps. If tips are off, also
check for worn adapter noses. With bolt-on adapters, look at bolt heads
— especially rear bolts. If head is beginning to look square, replace the
adapter. With weld-on bottom-strap and two-strap adapters, there are
cavities in the bottom. When any adapter wears into this cavity, replace
all adapters with similar wear.
• Check for tips that are worn through on the bottom or cracked in the
pocket area. Replace tips with either problem.
• Do not re-use bent or badly worn pins or retainers.
• Check for missing or broken retainers by tapping lightly on each pin. If
pin moves easily, replace the retainer.
TORQUE REQUIREMENTS FOR PLOW BOLTS
Standard Measurements Metric Equivalent Measurements
Size Torque Size Torque
5/8" (0.63") 200 ± 30 ft. lbs. 16 mm 270 ± 40 N•m
3/4" (0.75") 350 ± 45 ft. lbs. 19 mm 475 ± 60 N•m
7/8" (0.88") 550 ± 65 ft. lbs. 22 mm 750 ± 90 N•m
1" (1.00") 850 ± 110 ft. lbs. 25 mm 1,150 ± 150 N•m
1-1/4" (1.25") 1,700 ± 220 ft. lbs. 32 mm 2,300 ± 300 N•m
NOTE: Do not apply lubricant of any type to GET hardware (nut may back off prematurely).
431
Loaders
Measuring Wear on
Bucket Base Edges
A portion of each base cutting edge is designed to be a structural part of
the bucket. The basic dimensions of the structural piece are increased to
provide material that can be worn away without risking damage to the
bucket itself. Measurements of a base edge can determine how much of
this protective “wear material” remains. When that wear material is gone,
the base edge should be replaced to avoid possible damage to the struc-
tural part of the bucket.
The following procedures describe how to measure a base edge and how Figure 1
to use these measurements to estimate when that edge should be replaced. Front View of Bucket Corner
1. Tilt the bucket back to allow easy access to the edge.
2. Determine where the thickness measurements will be made.
Bucket Corner
Buckets with No Teeth: Measure near each end of the bucket just
inside the corner welds. See Figure 1. Base Edge
Weld
Buckets with Teeth: On buckets with corner teeth, measure mid-
way between the last two teeth at each end of the bucket. On buckets
without a tooth in the corner, measure just inside the corner welds (see
Figure 1) AND midway between the last two teeth at each end of the
bucket — a total of four places.
3. Mark the spot where each measurement will be made.
Note: If the inside of the bucket overlaps the rear portion of the base
edge, the following measurements should be made on the bottom of
the base edge; otherwise, measure on top.
Figure 2
a. Determine dimension “A” from the Base Edge Dimensions chart End View of Bucket Cutting Edge
on page 434 or calculate dimension “A” by estimating the original
edge width and multiplying by 0.6.
b. At each of the locations determined in Step II above, measure
dimension “A” from the center of the rear weld. See Figure 2.
(When measuring on the bottom of the edge, measure dimension
“A” from the rear corner of the edge.)
c. Mark each of these points on the edge with chalk.
If the edge is already worn beyond dimension “A” at any point, the
edge is already worn out and should be replaced as soon as possible to
avoid breakage.
4. Using calipers, measure the thickness of the edge at each marked
point. See Figure 2. The smallest of the measurements becomes
dimension “B”.
432
Loaders
WEAR GRAPH
100
Percent of Useable Wear Material Worn Away
ht
e
re
80 Lig
at
ve
er
Se
od
M
60
40
20
10
0
0 10 20 30 40 50 60 70 80
Figure 3
Percent of Original Thickness Worn Away
433
Loaders
Example: When should the owner of a Deere 444C wheel loader replace
the base edge? The machine is eight months old, in a moderate appli-
cation, and has 890 hours on the service meter.
Step 3: Dimension “A” is 6.0" (150 mm) and the original thickness was
about 1.00" (25 mm). This machine is about the same size as a
Caterpillar 916.
Step 4: Minimum dimension “B” was measured to be 0.64" (16 mm).
Step 5: Divide 0.64 by 1.00 (or divide 16 by 25). The result in either case
is 0.64.
Step 6: Subtract 0.64 from 1.00. (Always use 1.00 here regardless of the
base edge thickness.) The result is 0.36. On the Wear Graph,
locate 0.36 on the bottom line. Then read up to the “moderate”
line and across to 60%. This means that 60% of the wear material
has already worn away.
Step 7: When will the edge be 100% worn? Divide the current age by the
Percent Worn.
Using hours: 890 ÷ 60% = 890 ÷ 0.60 = 1483 hours
The edge should be ready for replacement at about 1483 hours.
Using months: 8 ÷ 60% = 8 ÷ 0.60 = 13.3 months.
In other words, this edge should be about worn out in another
five months.
434
Loaders
BUCKET TYPES
Penetration Bucket
Used where a smooth, level cut and moderate breakout forces are
required. This bucket has a flat floor and curved sidebars to aid
penetration. Weld-on flushmount adapters are used.
Multipurpose Bucket
Used for general purpose loading, topsoil stripping and debris
cleanup. The bowl assembly can be raised and the bucket can
be used as a dozer. When the bowl assembly is lowered, it’s a
bucket.
Rock Bucket
Designed to work principally in the mining or quarry industries
and is available in two configurations with straight or spade edges.
The straight edge has a higher breakout force and increased dump
clearance, the spade edge offers better penetration. These buckets
are offered with or without teeth, with teeth and bolt-on segments,
or with bolt-on cutting edges.
High capacity rock buckets are available for 990 and 988. They
are 6" (150 mm) wider than rock buckets to increase bucket
capacity for less dense material.
Base Edges
To match the base edge to the application, several styles of base edge are available.
436
Loaders
437
Loaders
438
Loaders
439
Loaders
440
Loaders
441
Loaders
442
Loaders
443
Loaders
444
Loaders
445
Loaders
446
Loaders
447
Loaders
448
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
449
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
450
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
451
Loaders
BOLT-HOLE DIMENSIONS
T
W W
A A W W
L L A A
T
L L
452
Loaders
BOLT-HOLE DIMENSIONS
TYPE 1
T
D C B
W
A
453
Loaders
BOLT-HOLE DIMENSIONS
TYPE 1
T
D C B
W
A
454
Loaders
BOLT-HOLE DIMENSIONS
T T
T C T
C C
A A A A
B B W+
W W+ W W B BW
B B
A A A A
L L
L L
DIMENSIONAL DATA FOR CORNER GUARD SYSTEM END BITS — Inches (mm)
Bolt Hole Location Bolt
L W W+ T End Bit Type A B C Dia.
10.38 (265) 21.88 (556) 1.96 (50) 136-8759 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 1.77 (45) 100-4043 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 1.57 (40) 1U0761 1 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
10.38 (265) 21.88 (556) 26.38 (670) 1.57 (40) 1U0764 2 7.88 (200) 3.12 (78) 3.50 (90) 1.25 (32)
8.93 (227) 20.12 (510) 1.38 (35) 106-9290 1 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 21.88 (556) 1.57 (40) 100-4044 1 7.99 (203) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 20.12 (510) 1.38 (35) 3G6395 1 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
7.88 (200) 20.12 (510) 23.62 (600) 1.38 (35) 1U1897 2 7.12 (180) 3.00 (75) 2.12 (53) 1.25 (32)
6.75 (170) 19.50 (496) 1.38 (35) 132-1033 1 7.12 (180) 2.62 (68) 2.25 (55) 1.25 (32)
6.75 (170) 19.50 (496) 22.62 (576) 1.38 (35) 1U1898 2 7.12 (180) 2.62 (68) 2.25 (55) 0.98 (25)
6.75 (170) 19.50 (496) 1.18 (30) 109-3571 1 7.12 (180) 2.62 (68) 2.25 (55) 1.25 (32)
6.75 (170) 19.50 (496) 1.18 (30) 4T8101 1 7.12 (180) 2.62 (68) 2.25 (55) 0.98 (25)
[132-1033]
6.25 (160) 13.50 (342) 1.00 (25) 4T8091 3 5.50 (140) 2.38 (62) 2.12 (53) 0.98 (25)
6.25 (160) 13.50 (342) 16.25 (412) 1.25 (30) 1U1896 4 5.50 (140) 2.38 (62) 2.12 (53) 0.98 (25)
[ ] Heavy Duty End Bit Segments (35 mm)
455
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
456
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
457
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
458
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
459
Loaders
BOLT-HOLE DIMENSIONS
B C DE H BE DC B
T
W
W
A A
T
L L
TYPE 1 TYPE 2
460
Loaders
BOLT-HOLE DIMENSIONS
Weld-on half-arrow edges protect the bucket structure by adding more wear T
H
material to the base edge, and they will fit other brand buckets.
The weld-on half-arrow edges can be used to customize loader buckets. For
example, they could be used as sidecutters on bucket sidebars to improve W
penetration, or welded between bucket teeth to reduce scalloping. Before B
welding half-arrow sections between bucket teeth, be sure to check for tip and
pin hole clearance. This is a concern primarily when using bottom strap
adapters.
Options
W T H B Overall Length
Part No. in. mm in. mm in. mm in. mm feet mm
134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438
134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 2438
8J8141 8 203 0.75 19 0.50 13 0.16 4.0 12 3658
8J8176 10 254 1.10 28 1.10 29 0.44 11 12 3658
6Y2107 10 254 1.60 40 1.20 30 1.00 25 12 3658
109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486
132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000
461
Loaders
CONVERSION PROCEDURE
Outline
A) Select Appropriate GET System. (See ‘‘Bucket Conversion Options’’ flow chart, below.)
B) Determine Bucket Width and Base Edge Thickness. (See ‘‘How to Take Bucket Width Measure-
ments’’ and ‘‘Recommended Base Edge Thickness by Loader Weight.”)
C) Select Base Edge and Attachments
— GP, MP Buckets and Rock Buckets — Corner Guard System.
— GP, MP Buckets and Rock Buckets — GP edge, bolt-on and weld-on components.
— Bucket Base Edges Without Holes.
— Rock Buckets.
— MODULOK system.
D) Install System
— Corner Guard System installation.
— GP edge installation.
— Rock Bucket edge installation.
— MODULOK system installation.
E) Complete Bucket Conversion Report Form (PEEP4210).
462
Loaders
CONVERSION PROCEDURE
WIDTH
WIDTH (Inner side bar to inner side bar)
WIDTH (Outer side bar to outer side bar)
463
Loaders
Note: The Corner Guard System is available for all current and many
non-current Caterpillar general purpose and multi-purpose buckets.
Competitive buckets of similar widths can also be converted to Corner
Guard System.
The corner adapter wraps around the end of the cutting edge and the
bucket corner and bolts to the bucket corner. It securely fits against a
machined pad on the corner’s front surface to resist high loads.
Tips
Tip
Choose from easily replaceable Caterpillar long, short, abrasion, and pene-
tration side-pinned tips.
Edge Segments
Segments bolt between teeth to virtually eliminate base edge scalloping
and leave a clean work surface.
Larger Teeth
Tips and adapters larger than standard are available for larger machines.
Larger teeth provide more strength and longer wear life.
464
Loaders
For work in loose materials, Corner Guard System offers a four-piece bolt- Bolt-on Edge with
on cutting edge to fully protect the base edge. The four-piece bolt-on edge Straight End Bit
design includes two center edges and two corner end bits. Standard DH-2
pieces can be propellered for increased life in most applications. Abrasion
resistant bolt-on edges are not designed to be propellered.
Because the major wear is at the corners, small end bits were designed to
provide more efficient use of wear material. With independent main-
tenance of these end bits, Corner Guard System bolt-on edges can provide
a significant cost advantage over other bolt-on edge systems.
Caterpillar has a new bolt-on edge option that lasts even longer than
standard DH-2 edges. Very hard, abrasion resistant particles have been
added to protect critical wear areas. In highly abrasive applications, these
protected bolt-on edges can last more than five times longer than standard
DH-2 bolt-on edges.
465
Loaders
GP, MP BUCKETS CORNER GUARD SYSTEM
Selection
Once you have measured the bucket width OUTER SIDEBAR TO OUTER SIDEBAR and
determined base edge thickness, turn to the following charts.
1. Select an edge with length closest to, but not less than, the width of the bucket. The width of the
bucket must measure between the uncut length of the edge and its minimum cut length as
indicated on the chart. The minimum cut length is the edge length that is required to install nuts
and bolts for end bit with Cat corners.
2. The edge selected should be similar in thickness to the edge already in the bucket.
3. Choose the corners, cutting edges or adapters, tips, and hardware from columns below each
selected base edge.
Corner Guard System was designed for GP and MP buckets on small and medium loaders (910-980
size). Use rock bucket base edges, where available, for high impact applications.
NOTE: It may be possible to drill base edges to accept bolt-on components. Special Instruction,
Form SEHS8599, contains information on tools and procedures. To determine the bolt
hole locations, use the dimensional charts in this Guide, or use the bolt-on component as a
template.
Corner Guard System
Caterpillar developed the easily replaceable bolt-on Corner
Guard System to counteract wear on loader bucket corners
and edges. It includes both bolt-on corner tooth and bolt-on
cutting edge systems. With proper use, it can substantially
increase conventional base edge and corner wear life.
The Corner Guard System:
• Reduces bucket maintenance costs.
• Improves bucket performance and capacity.
• Provides greater bucket versatility than the
conventional base edge and corners.
• Is available to retrofit non-current Caterpillar buckets
and others if their widths are similar.
466
Loaders
467
Loaders
CORNER GUARD SYSTEM
468
Loaders
CORNER GUARD SYSTEM
469
Loaders
CORNER GUARD SYSTEM
470
Loaders
CORNER GUARD SYSTEM
471
Loaders
CORNER GUARD SYSTEM
472
Loaders
CORNER GUARD SYSTEM
Bolts
Nuts
Adapters per Edge 8
Bolt-On
Center (6) 3G3357
Bolts (12) 5P8361
Nuts (12) 5P8362
Corner (Two-Bolt) (R/L) 8E5358/9
Bolts (2) 5P8361
(2) 6V6535
Nuts (4) 3K9770
Corner (One-Bolt) (R/L) 3G5358/9
Bolts (2) 5P8361
Nuts (2) 5P8362
Weld-On
Flushmount 1U1357
Bottom Strap 1U1350
Long Tip♦ 1U3352
Unitooth
Corner (R/L) 8E5318/9
Bolts (2) 5P8361
(2) 6V6535
Nuts (4) 3K9770
Center (6) 1U1567
Bolts (12) 5P8361
Nuts (12) 5P8362
* Optional angled end bit.
♦ See tip options chart.
473
Loaders
CORNER GUARD SYSTEM
474
Loaders
CORNER GUARD SYSTEM
475
Loaders
CORNER GUARD SYSTEM
476
Loaders
CORNER GUARD SYSTEM
477
Loaders
CORNER GUARD SYSTEM
478
Loaders
CORNER GUARD SYSTEM
479
Loaders
CORNER GUARD SYSTEM
480
Loaders
CORNER GUARD SYSTEM
481
Loaders
CORNER GUARD SYSTEM
482
Loaders
CORNER GUARD SYSTEM
483
Loaders
GP, MP BUCKETS — CORNER GUARD SYSTEM
Installation
1. Trim edge to fit exactly the width of the bucket.
2. Weld components in bucket maintaining an accurate alignment between the base edge and
corners. This is to insure easy installation and removal of the corner adapter.
• Special fixtures (discussed in IRM 81-17) are available to
hold the Corner Guard System edge and corners in proper
position during welding.
• To weld corners in place with a modified base edge, where
a proper welding fixture can’t be used, use the corner adapter
itself as a welding fixture to set the corner in position, then
tack the corner in place. After making sure the corner adapter
slides on and off easily, weld the corner place.
• Special Instruction Form SMHS7527 discusses welding and
installation of Corner Guard System components and the
special fixtures.
3. Buckets equipped with Corner Guard System should be
identified as such with Decal 6V3607.
CAUTION
BUCKET DESIGNED TO ACCEPT CORNER GUARD SYS-
TEM. FOR MAXIMUM LIFE, DO NOT OPERATE BUCKET
WITHOUT PROPER CORNER GUARD SYSTEM COMPO-
NENTS. SEE YOUR DEALER FOR ADAPTABILITY OF
TEETH OR BOLT ON EDGES.
6V3607
You may be unable to find a Corner Guard System edge to fit a given bucket. It is possible to
convert a bucket to Corner Guard System even if the width doesn’t fall between the minimum cut
length and the original length for the edges listed on pages 468-483. However, because of the
location of the end bit bolt holes, you will not be able to use the special welding fixtures and you
may not be able to use bolt-on edges. Also, tip spacing may not be uniform. Once you have selected
an edge with length closest to, but not less than the width of the bucket, consult pages 437-441 to
find the distance from the last row of the bolt holes to the end of the edge. You can cut the edge as
far as the last row of holes, but never make a cut thru or past them. Next, plug this last row of holes
(on each end) with weld because the corner weld will pass over them. Once the edge has been cut
and fit, and the holes plugged, weld the edge into the bucket as indicated.
NOTE: It may be necessary to remove material from or add material to the bucket to make the base
edge and corners fit. Cut the bucket to fit if necessary or, if needed, weld in T-1 steel and
trim to fit.
REMEMBER: There is no ‘‘standard’’ way to convert a bucket to Corner Guard System. Final
decision on weldments, cutting, etc....must be made by the dealer using Special
Instructions and this book as guides.
484
Loaders
GP, MP BUCKETS AND ROCK BUCKETS
485
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
486
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
487
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
488
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
489
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
490
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
491
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
492
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
493
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
494
Loaders
GP, MP (NON CGS) BUCKETS AND ROCK BUCKETS
495
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm)
Length — inches 187.0 169.8 150.0 150.0 143.5
mm (4750) (4313) (3810) (3810) (3645)
Width 21.3 17.4 11.1 10.51 13.0
(541) (442) (282) (267) (330)
Thickness 2.5 2.25 1.25 1.25 2.0
(63.5) (57) (32) (32) (51)
Base Edge 9V0007 9V0009 7V0779 8K9914 9V0232
LOADER BUCKETS
Weld-On Adapters
Two-Strap 3G9494 8E3464♦
Bucket Corners 2V4314/5
Flushmount 3G4554 7J9554 1U1304 1U1304 8E0464♦
Bucket Corners (2) 9V6559 (2) 9V6559 8K7525/6 8K7525/6 6W9412/3
Bottom Strap 9J3662 9J3662 9J8929 9J8929 8E5464♦
Bucket Corners 8K6489/90 8K6489/90 5V2772/3 5V2772/3 7K9309/10
Long Tip 9W8552 9W8552 1U3302 1U3302 9W8452
Size-Up Adapter
Flushmount 1U1354 1U1354
Two-Strap 9W9704 4T7554
Bottom Strap 1U1350 1U1350
Long Tip 4T4702 1U3352 1U3352 9W8552
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 9W1304 9W1304
Corners 7T3305/6 7T3305/6
Long Tip 1U3302 1U3302
496
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 127.0 127.0 122.8 122.0 120.7 118.0
mm (3226) (3226) (3120) (3100) (3067) (2997)
Width 9.6 9.0 11.8 13.0 12.0 11.1
(245) (228) (300) (330) (305) (282)
Thickness 1.0 1.0 1.57 2.0 1.77 1.25
(25) (25) (40) (51) (45) (32)
Base Edge 5V7415 8K9916 8V6275 9V0237 8K5000 7V0781
LOADER BUCKETS 1177
Weld-On Adapters
Two-Strap 8E3464♦♦
Bucket Corners 2V4314/5
Flushmount 1U1254 1U1254 8E0464♦♦ 7J9554 1U1304
Bucket Corners 8K7525/6 4V8285/6 6W9412/3 (2) 9V6559 8K7525/6
Bottom Strap 3G0169 3G0169 8E5464♦♦ 9J3662 9J8929
Bucket Corners 8K6455/6 8K6455/6 7K9309/10 8K6489/90 5V2772/3
Long Tip 1U3252 1U3252 9W8452 9W8552 1U3302
Size-Up Adapter
Flushmount 1U1304 1U1304
Corners 8K7525/6 8K7525/6
Two-Strap 4T7554
Bottom Strap 9J8929 9J8929
Corners 8K6455/6 8K6455/6
Long Tip 1U3302 1U3302 9W8552
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G0169 7T3354 9W1304
Corners (2) 3G0169 7T3305/6 7T3305/6
Long Tip 1U3252 1U3352 1U3302
497
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 105.7 100.4 98.4 96.0 93.3
Length — mm (2686) (2552) (2500) (2439) (2370)
Width 9.0 10.5 7.5 11.1 7.9
(229) (267) (191) (282) (200)
Thickness 1.0 1.25 0.75 1.25 0.79
(25) (32) (19) (32) (20)
Base Edge 1V3915 9V5328 5G4642 7V0782 5W7958
LOADER BUCKETS
Weld-On Adapters
Flushmount 1U1254 1U1304 4T1204 1U1304 1U1254
Bucket Corners 4V8285/6 8K7525/6 5G5769/70 8K7525/6 4V8285/6
Bottom Strap 3G0169 9J8929 8J7525 9J8929 3G0169
Bucket Corners 8K6455/6 5V2772/3 9R5205/6 5V2772/3 8K6455/6
Long Tip 1U3252 1U3302 1U3202 1U3302 1U3252
Size-Up Adapter
Flushmount 1U1304 1U1354 1U1254 1U1304 1U1354
Corners 8K7525/6 (2) 2V6299 4V8285/6 8K7525/6
Two-Strap 6Y3224
Bottom Strap 9J8929 1U1350
Corners 8K6455/6 3V7197/8
Long Tip 1U3302 1U3352 6Y3222
Bottom Strap 3G0169 9J8929
Corners 8K6455/6 8K6455/6
Long Tip 1U3252 1U3302
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G0169 9W1304 8J7525 9W1304 3G0169
Corners (2) 3G0169 7T3305/6 (2) 8J7525 7T3305/6 (2) 3G0169
Long Tip 1U3252 1U3302 1U3202 1U3302 1U3252
498
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 69.7 67.5 64.8 62.0 59.4
mm (1770) (1714) (1646) (1575) (1510)
Width 7.9 14.9 12.8 10.0 11.8
(200) (380) (325) (254) (300)
Thickness 0.78 2.4 2.0 1.5 1.57
(20) (60) (50) (38) (40)
Base Edge 5W7955 8R0982 9C3955 5V0166 9C3328
LOADER BUCKETS
Weld-On Adapters
Flushmount 1U1254
Bucket Corners 4V8285/6
Bottom Strap 3G0169
Bucket Corners 8K6455/6
Long Tip 1U3252
Size-Up Adapter
Flushmount 1U1304
Corners 8K7525/6
Bottom Strap 9J8929
Corners 8K6455/6
Long Tip 1U3302
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 3G0169 1U1553 8E6464 3G8354 7T3354
Corners (2) 3G0169 9W7555/6 8E2465/6 3G8355/6 7T3355/6
Long Tip 1U3252 9W8552 9W8452 1U3352 1U3352
499
Loaders
STRAIGHT BASE EDGES WITHOUT HOLES — FOR GP, ROCK, EXCAVATOR, LOADER BUCKETS
BUCKET BASE EDGES WITHOUT HOLES (FOR GP, ROCK, EXCAVATOR, LOADER) — Inches (mm) continued
Length — inches 41.7 35.4 36.5 35.8 35.1
mm (1058) (900) (928) (910) (892)
Width 11.8 10.6 6.0 11.1 8.9
(300) (270) (150) (282) (226)
Thickness 1.57 1.25 0.63 1.25 1.25
(40) (32) (16) (32) (32)
Base Edge 9C2867 5W7943 5G3897 6W9175 9V3998
LOADER BUCKETS 1178
Weld-On Adapters
Flushmount 1U1204 4T1204 1U1304
Bucket Corners 9R5205/6 (2) 5G5769 8K7525/6
Bottom Strap 8J7525 8J7525 9J8929
Bucket Corners 9R5205/6 9R5205/6 5V2772/3
Long Tip 1U3202 1U3202 1U3302
Size-Up Adapter
Flushmount 1U1254 1U1254
Corners 4V8285/6 4V8285/6
Two-Strap 6Y3224
Long Tip 6Y3222
Bottom Strap 3G0169 3G0169
Corners 8K6455/6 8K6455/6
Long Tip 1U3252 1U3252
EXCAVATOR BUCKETS
Weld-On Two-Straps
Center 7T3354 8J7525 8J7525 9W1304 3G6304
Corners 7T3355/6 (2) 8J7525 (2) 8J7525 7T3305/6 3G6305/6
Long Tip 1U3352 1U3202 1U3202 1U3302 1U3302
500
Loaders
2 Strap Weld-on
Adapter
Sidebar
Protector
Base Edge
Wear Plate
Tip
Bolt-on
Bolt-on Edges
Wear Plate Reversible
Edge Segment
501
Loaders
502
Loaders
ROCK BUCKETS
503
Loaders
ROCK BUCKETS (SPADE)
504
Loaders
ROCK BUCKETS (SPADE)
505
Loaders
ROCK BUCKETS (SPADE)
506
Loaders
ROCK BUCKETS (SPADE)
507
Loaders
ROCK BUCKETS (SPADE)
508
Loaders
ROCK BUCKETS (SPADE)
509
Loaders
ROCK BUCKETS (SPADE)
510
Loaders
ROCK BUCKETS (SPADE)
511
Loaders
ROCK BUCKETS (SPADE)
512
Loaders
ROCK BUCKETS (SPADE)
513
Loaders
ROCK BUCKETS (SPADE)
514
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
The Mechanically Attached Adapter (MAA) System offers full protection of the base edge of the bucket while at
the same time features fast removal and installation. Full base edge protection means lower operating cost to cus-
tomers over conventional unprotected base edges because wear to the costly base edge is minimized. Fast removal
and installation translates to increased production and reduced maintenance time since the GET can be changed
quickly in the pit or in the shop at normal scheduled maintenance intervals. The MAA System provides good pen-
etration characteristics and allows operators to maximize bucket fill factors while spending less time in the bank load-
ing when compared to more blunt edges, therefore, cycle times are shorter and there is less resistance for the machine’s
powertrain to overcome.
Demonstration Kit
A scale model demonstration kit (form number PEKP7025) is also available through the literature distribution sys-
tem. The kit contains a small scale version of a portion of the base edge, an adapter, c-clamp and wedge, tip, edge
cover and pins and is enclosed in a green carrying case for ease in handling. The demonstration kit can be used in
conjunction with the CD ROM.
515
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
Adapter Wear-Out
The center adapters have two strips of Abrasion Resistant Material (ARM) added to the
top strap so wear out occurs on the bottom strap. The ARM is placed where the most wear
occurs: on top of the leading edge of the adapter, just behind the nose. There is a wear
indicator built into the c-clamp to provide a visual indicator of when to replace the center
adapters (see illustration at right for location). The wear indicator is intended to be an indi-
cator only and not an absolute measurement of a worn out adapter. Because of variable
site conditions, each site must develop a measurement for the wear indicator and use that
measurement as a guide to determine when the adapter is worn out. In order for the wear
indicator to provide a valid reference, the bucket must be operated with the base edge par-
allel to the ground. The bucket should be racked back to reveal the bottom side of the
bucket to perform an inspection. Measure the length of the wear indicator to determine
when to change the adapter. Do not attempt to reuse c-clamps or wedges when installing
new adapters because retention problems could occur. Always use new c-clamp assem-
blies and wedges.
Warranty Coverage
Caterpillar GET products are warranted against breakage for the useful life of the part.
Like with all GET products, there will be some throw away material when the component
has reached the end of its useful life. Unique to the MAA System is the wear indicator
which provides a reference as to when the adapter and c-clamp is worn out. Caterpillar
will not provide warranty coverage under the breakage terms of the warranty statement if
the center adapters are worn beyond the wear indicator of the c-clamp assembly.
Bucket Positioner
One of the largest contributing factors to the reduced life of GET components is the posi-
tion of the bucket relative to the ground. In order to obtain maximum benefit of the wear
material in the MAA System, it is recommended to run the bucket parallel to the ground.
Inclination of the bucket forward will increase wear on the tips and adapters causing them
to become blunt; inclination of the bucket rearward will increase wear on the wear plates,
bottom of the tip pockets and reduce penetration. The bucket positioner on the machine
should always be adjusted so there is no angle of attack.
516
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
NOTE: Always use new pins, wedges and c-clamp assemblies when changing tips, edge protectors and adapters. Special Instruction SEHS9733
covers pin installation and removal. Use 1U7184 Pin remover tool. To provide added safety protection during the installation process, rubber caps
are provided for tip pins, edge cover pins and wedges and are recommended for use by the installer to prevent injury.
NOTE: There are three sizes of wedges for the MAA System: standard, medium oversize and large oversize (each one is wider). In most cases, the
standard size wedge will be used, but as wear to the front portion of the slot in the base edge occurs (where the adapter mounts), it may be nec-
essary to step up in size to a wider wedge. The decision to move up should be made when the standard wedge drives in either flush or below the
top surface of the c-clamp assembly. Correspondingly, as wear continues in the rectangular slot and the medium size wedge drives in flush or
below the top surface of the c-clamp assembly, the largest, oversize wedge should be used to secure the adapters.
517
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
Installation
1. All mating surfaces should be clean and free of rust and dirt.
2. Slide the center adapters on base edge at the slotted locations and align the slot in the adapter with the slot in the
base edge.
3. Insert the c-clamp assembly in each center adapter and base edge slot with the Abrasive Resistant Material (ARM)
side down and push to the rear of the cavity.
4. Insert one wedge between the c-clamp assembly and base edge with the small end first. The wedge serrations should
be facing the c-clamp assembly. Drive the wedge with a hammer until the wedge is fully set, retighten after several
passes. Burn off the portion of the wedge protruding below the c-clamp assembly on the bottom of the bucket leav-
ing 1/4 inch (6.5 mm) protruding. It is not necessary to burn off the top portion of the wedge protruding above the
c-clamp assembly.
5. Insert one c-clamp assembly in each corner adapter (with the ARM facing outside the bucket) and corner slot and
push toward the rear of the slot. The thinner portion of the c-clamp should be on the inside of the bucket with the
ARM material toward the outside.
6. Insert one wedge between the c-clamp and corner adapter, smallest end to the bucket outside with the serrated edge
toward the c-clamp assembly. Drive the wedge with a sledgehammer from the inside of the bucket until it is totally
secure, retighten after several passes with the loader. Burn off the portion of the wedge that protrudes beyond the
c-clamp assembly on the outside edge of the bucket leaving 1/4 inch (6.5 mm) protruding.
7. Wedges should be checked periodically for tightness. If loose wedges and c-clamp assemblies are observed, tighten
immediately. If loosening persists, tack weld the wedge to the c-clamp assembly on the top side of the center adapters
and the inside of the corner adapters.
NOTE: Always use new pins when installing tips and edge protectors. Use the 1U7184 pin remover tool. See
Special Instruction SEHS9733 for pin installation and removal.
NOTE: Wedges are available in two oversize versions. The oversize wedge should be used when the top of the
smaller wedge drives in beyond level with the adapter and c-clamp assembly.
Removal
1. Reverse the procedure.
NOTE: After the adapter is removed, the base edge should be inspected for cracks around the scallop area and
around the slot area for the c-clamp assembly and wedge. If cracks are noted, they should be repaired
immediately. After the edge protector is removed, the mounting lug welds should also be inspected for
cracks and repaired as required.
If welding is required on the base edge, preheat an area 4 inches (100 mm) around the area to be welded to
400-500˚F (204-260˚C). Apply low hydrogen E7018 stick rod weld to make the repair.
518
Loaders
MECHANICALLY ATTACHED ADAPTER (MAA) SYSTEM
519
Loaders
MODULOK SYSTEM
Adapter
Side Pin Cover Abrasion Tip
Cutting Edge
Cover
520
Loaders
MODULOK SYSTEM
521
Loaders
MODULOK SYSTEM
522
Loaders
MODULOK SYSTEM
523
Loaders
MODULOK SYSTEM
524
Loaders
HEAVY DUTY MINING SYSTEM
525
Loaders
BACKHOE LOADER BUCKETS PRODUCT DESCRIPTION
Outline
A) Select appropriate GET system. (See “Backhoe Loader Bucket Conversion Options” chart below.)
B) Determine bucket width and base edge thickness. (See “How to Take Measurements” and “Recommended Base
Edge Thickness by Backhoe Loader Weight”.)
C) Select base edge, attachments and installation procedures.
1. For Front Buckets — Consult page 521.
2. For Rear Buckets — Consult page 522.
D) Complete Ground Engaging Tools Conversion Report Form (PEEP4210).
WIDTH
WIDTH (Inner side bar to inner side bar) Base Edge Thickness
WIDTH (Outer side bar to outer side bar)
526
Loaders
BACKHOE LOADER BUCKETS PRODUCT DESCRIPTION
Selection
After measuring bucket width, OUTER SIDEBAR TO OUTER SIDEBAR, and determining base
edge thickness, turn to charts in the following section.
1. Select a base edge with length closest to, but not less than, the width of the bucket. The width of
the bucket must measure between the uncut length of the edge and its minimum cut length, as
indicated in the chart.
2. The edge selected should be similar in thickness to the edge already on the bucket.
3. Choose the adapters and tips from columns below each selected base edge.
REMEMBER: Since all buckets are different, there is no “standard” way to convert buckets. Final
decisions on welding, cutting, etc....must be made by the Caterpillar dealers.
NOTE: In many cases, the minimum cut length for an edge is the same dimension as the regular length
for another edge.
527
Loaders
BACKHOE LOADER BUCKETS CONVERSION PROCEDURE
L2
L1
TYPE 1
528
Loaders
NOTES
529
Loaders
NOTES
530
Skid Steer Loader GET / Work Tools
531
Skid Steer Loader GET / Work Tools
COMPLEX HYDROMECHANICAL WORK TOOLS — GET
COLD PLANERS
PC3 Part No.
Planer Arrangement — S/N ACC1-UP 149-7669
Drum Group — Planer (12 in.) — Standard 165-5342 1 per planer arrangement; 28-bits and holders per drum
Drum Group — Planer (6 in.) — Optional 165-5353 1 per planer arrangement; 20-bits and holders per drum
Drum Group — Planer (4 in.) — Optional 165-5354 1 per planer arrangement; 11-bits and holders per drum
Drum Group — Planer (2.5 in.) — Optional 165-5356 1 per planer arrangement; 11-bits and holders per drum
Bit Assembly — Cutter (Standard) 138-0697 Quantity varies by drum group
(Enhanced Rotation) 138-0678
(Heavy Duty) 140-2864
Bit Assembly — Cutter (Concrete) — Optional 149-5763 Quantity varies by drum group
Holder — Bit 7R6187 Quantity varies by drum group
Skid Assembly 141-7266 4 per planer arrangement
Pin 141-7267 1 per skid
Ring-Retaining 6V8754 1 per skid
PC4 Part No.
Planer Arrangement — S/N ABW1-UP 165-5334
Drum Group — Planer (16 in.) 149-7666 1 per planer arrangement; 50-bits and holders per drum
Drum Group — Planer (6 in.) 165-5353 1 per planer arrangement; 20-bits and holders per drum
Drum Group — Planer (4 in.) 165-5354 1 per planer arrangement; 11-bits and holders per drum
Drum Group — Planer (2.5 in.) 165-5356 1 per planer arrangement; 11-bits and holders per drum
Bit Assembly — Cutter (Standard) 138-0697 Quantity varies by drum group
(Enhanced Rotation) 138-0678
(Heavy Duty) 140-2864
Bit Assembly — Cutter (Concrete) 149-5763 Quantity varies by drum group
Holder — Bit 7R6187 Quantity varies by drum group
Skid Assembly 141-7266 4 per planer arrangement
Pin 141-7267 1 per skid
Ring-Retaining 6V8754 1 per skid
VIBRATORY COMPACTORS
CV16 Part No.
Roller Arrangement — S/N ACH1-UP 165-8500
Drum Assembly (66 in.) 165-8447 1 per roller arrangement
Scraper Assembly 165-8442 1 per roller arrangement
CV18 Part No.
Roller Arrangement — S/N AAM1-UP 165-8501
Drum Assembly (73 in.) 165-8446 1 per roller arrangement
Scraper Assembly 165-8441 1 per roller arrangement
LANDSCAPE RAKES
LR15 Part No.
Landscape Rake Arrangement — S/N ADF1-UP 159-5349
Chain Assembly 159-5365 1 per rake arrangement
Tube Assembly (Rake Bar) 159-5367 6 per chain assembly
Tube Assembly (Rake Bar) 159-5368 6 per chain assembly
Bucket Assembly 159-5388 1 per rake arrangement
Plate — Skid 159-5395 4 per rake arrangement; 2 per side
Bolt 170-5386 2 per side
Nut 8T4244 2 per side
LR18 Part No.
Landscape Rake Arrangement — S/N ADP1-UP 159-5385
Chain Assembly 159-5364 1 per rake arrangement
Tube Assembly (Rake Bar) 159-5360 6 per chain assembly
Tube Assembly (Rake Bar) 159-5361 6 per chain assembly
Bucket Assembly 159-5387 1 per rake arrangement
Plate — Skid 159-5395 4 per rake arrangement; 2 per side
Bolt 170-5386 2 per side
Nut 8T4244 2 per side
532
Skid Steer Loader GET / Work Tools
COMPLEX HYDROMECHANICAL WORK TOOLS — GET
LANDSCAPE TILLERS
LT13 Part No.
Landscape Tiller Arrangement — S/N AAS1-UP 165-3578
Drum Assembly — Shaft 165-3585 1 per tiller arrangement
Tine 159-5339 24/drum
Bolt 8T4183 1/tine
Locknut 6V7687 1/tine
Skid Assembly 164-3215 2/tiller
Tube 165-3589 2/skid
Bolt 7X2556 2/skid
Washer 8T4122 2/skid
Locknut 8T4778 2/skid
LT18 Part No.
Landscape Tiller Arrangement — S/N ABZ1-UP 159-5323
Drum Assembly — Shaft 159-5337 1 per tiller arrangement
Tine 159-5339 36/drum
Bolt 8T4183 1/tine
Locknut 6V7687 1/tine
Skid Assembly 164-3215 2/tiller
Tube 165-3589 2/skid
Bolt 7X2556 2/skid
Washer 8T4122 2/skid
Locknut 8T4778 2/skid
BROOMS
BA18 Angle Broom Part No.
Broom Arrangement (Manual) — S/N ACE1-UP 166-0287
Broom Arrangement (Hydraulic) — S/N ACE1-UP 166-0288
Brush Kit — Poly (kit contains 21 bristles) 166-0322 2 req for all poly/1 req for poly-steel mix
Bristle Assembly — Poly 166-0300 21 per 166-0322 kit
Brush Kit — Steel Wire (kit contains 21 bristles) 166-0323 2 req for all steel/1 req for poly-steel mix
Bristle Assembly — Steel Wire 166-0301 21 per 166-0323 kit
Core Assembly 166-0302 1 per broom arrangement
Stand — Support 166-0318 4 per broom arrangement
Pin 170-3687 1 per stand
Water Sprinkler Kit (Optional) 166-0320 Requires WT Electrical Control Switch and Water Tank
BP15 Pickup Broom Part No.
Broom Arrangement — S/N ACT1-UP 165-5346 Requires 165-9889 Bracket when used on 216/226;
165-9800 when used on 236/246. Used for dumping bucket.
Brush Kit — Poly (kit contains 18 bristles) 165-9069 2 req for all poly/1 req for poly-steel mix
Bristle Assembly — Poly 165-9888 18 per 165-9069 kit
Brush Kit — Steel Wire (kit contains 18 bristles) 165-9070 2 req for all steel/1 req for poly-steel mix
Bristle Assembly — Steel Wire 165-9887 18 per 165-9070 kit
Core Assembly 169-2812 1 per broom arrangement
Plate — Core 169-2813 1 per core assembly
Bolt 4M0061 3 per core assembly
Nut 169-2794 3 per core assembly
Bucket Assembly 169-2783 1 per broom arrangement
Edge — cutting 135-9394 1 per bucket assembly
Screw — Flathead 159-2953 8 per bucket assembly
Locknut 8T4778 8 per bucket assembly
Brush Arrangement — Gutter (Optional) 165-9900 1 per machine
Bristle Assembly — Wire 172-4563 1 per gutter brush arrangement
Bolt 8T6912 4 per bristle assembly
Washer 8T4224 4 per bristle assembly
Locknut 6V9189 4 per bristle assembly
Lines, Auxiliary Hydraulic (Req. for Gutter Brush) 165-9886 1 per gutter brush arrangement
Water Sprinkler Kit (Optional) 166-0320 Requires WT Electrical Control Switch and Water Tank
533
Skid Steer Loader GET / Work Tools
COMPLEX HYDROMECHANICAL WORK TOOLS — GET
BROOMS (continued)
BP18 Pickup Broom Part No.
Broom Arrangement — S/N ADH1-UP 165-9057 Requires 165-9800 when used on 236/246.
Used for dumping bucket.
Brush Kit — Poly (kit contains 22 bristles) 165-9071 2 req for all poly/1 req for poly-steel mix
Bristle Assembly — Poly 165-9888 22 per 165-9071 kit
Brush Kit — Steel Wire (kit contains 22 bristles) 165-9072 2 req for all steel/1 req for poly-steel mix
Bristle Assembly — Steel Wire 165-9887 22 per 165-9072 kit
Core Assembly 173-1760 1 per broom arrangement
Plate — Core 173-1761 1 per core assembly
Bolt 5M3062 3 per core assembly
Washer 8T4896 3 per core assembly
Bucket Assembly 173-1750 1 per broom arrangement
Edge — cutting 135-9396 1 per bucket assembly
Screw — Flathead 159-2953 8 per bucket assembly
Locknut 8T4778 8 per bucket assembly
Brush Arrangement — Gutter (Optional) 165-9900 1 per broom arrangement
Bristle Assembly — Wire 172-4563 1 per brush arrangement
Bolt 8T6912 4 per bristle assembly
Washer 8T4224 4 per bristle assembly
Locknut 6V9189 4 per bristle assembly
Water Sprinkler Kit (Optional) 166-0320 Requires WT Electrical Control Switch and
Water Tank
AUGERS
A7 Auger Part No.
Auger Arrangement (301.5 Mini-HEX Mount) — S/N 7BZ1-UP 153-4062
Auger Arrangement (302.5 Mini-HEX Mount) — S/N 7BZ1-UP 153-4063
A13 Auger Part No.
Auger Arrangement (Skid Steer Mount) — S/N ACY1-UP 161-5825
Auger Arrangement (302.5 Mini-HEX Mount) — S/N ACY1-UP 161-5845
A19 Auger Part No.
Auger Arrangement (Skid Steer Mount) — S/N ACY1-UP 161-5850
Auger Bits (Common for A13 and A19) Part No.
Bit Group — Auger (6 in.) 153-4083 For use with A7, A13, A19
Bit Group — Auger (9 in.) 153-4084 For use with A7, A13, A19
Bit Group — Auger (12 in.) 153-4085 For use with A7, A13, A19
Bit Group — Auger (18 in.) 153-4086 For use with A13, A19
Bit Group — Auger (24 in.) 153-4089 For use with A13, A19
Bit Group — Auger (36 in.) 153-4091 For use with A13, A19
Bit Group — Auger (12/24 in.) 153-4092 For use with A13, A19
Bit Group — Auger (18/36 in.) 153-4095 For use with A13, A19
Tooth 153-4094 Quantity varies by bit group
Bolt — Tooth 6V8959 1 per tooth
Locknut — Tooth 6V7687 1 per tooth
Pilot Point 153-4093 1 per bit group
Bolt — Pilot Point 7X2549 1 per pilot point
Nut — Pilot Point 6V7687 1 per pilot point
Bolt — Auger Bit 7X2532 1 per bit group
Nut — Auger Bit 8T4131 2 per bit group
Extension (12 in.) 156-6328 Optional to extend dig depth
Adapter (HEX to Round Shaft) 156-6329 Optional to allow the use of round shaft auger bits
534
Skid Steer Loader GET / Work Tools
FAB WORK TOOLS — GET
BUCKETS/FORKS
General Purpose Part No.
Bucket As — 60 in. base edge 165-6152
Edge — base 149-5435 1 per bucket
Bucket Ar — 60 in. bolt-on edge 152-0224
Bucket As 165-6152
Edge — cutting 135-9394 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 60 in. bolt-on teeth 152-0223
Bucket As 165-6152
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
Bucket As — 66 in. base edge 165-6153
Edge — base 149-5436 1 per bucket
Bucket Ar — 66 in. bolt-on edge 152-0226
Bucket As 165-6153
Edge — cutting 139-9395 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 66 in. bolt-on teeth 152-0225
Bucket As 165-6153
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
Bucket As — 72 in. base edge 165-6154
Edge — base 149-5437 1 per bucket
Bucket Ar — 72 in. bolt-on edge 152-0229
Bucket As 165-6154
Edge — cutting 135-9396 1 per bucket
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
Bucket Ar — 72 in. bolt-on teeth 152-0228
Bucket As 165-6154
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
Dirt Part No.
Bucket As — 54 in. base edge 165-6155
Edge — base 149-5434 1 per bucket
Bucket Ar — 54 in. bolt-on edge 152-0230
Bucket As 165-6155
Edge — cutting 135-9393 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket As — 60 in. base edge 165-6156
Edge — base 149-5435 1 per bucket
Bucket Ar — 60 in. bolt-on edge 152-0231
Bucket As 165-6156
Edge — cutting 135-9394 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket As — 66 in. base edge 165-6157
Edge — base 149-5436 1 per bucket
Bucket Ar — 66 in. bolt-on edge 152-0232
Bucket As 165-6157
Edge — cutting 139-9395 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
535
Skid Steer Loader GET / Work Tools
FAB WORK TOOLS — GET
BUCKETS/FORKS (continued)
Utility Part No.
Bucket As — 60 in. base edge 165-8835
Edge — base 149-5435 1 per bucket
Bucket Ar — 60 in. bolt-on edge 165-8836
Bucket As 165-8835
Edge — cutting 135-9394 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket As — 66 in. base edge 165-8746
Edge — base 149-5436 1 per bucket
Bucket Ar — 66 in. bolt-on edge 165-8747
Bucket As 165-8746
Edge — cutting 139-9395 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket As — 72 in. base edge 165-8747
Edge — base 149-5437 1 per bucket
Bucket Ar — 72 in. bolt-on edge 165-8778
Bucket As 165-8747
Edge — cutting 139-9396 1 per bucket
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
Light Material Part No.
Bucket As — 72 in. base edge 164-7414
Edge — base 149-5437 1 per bucket
Bucket Ar — 72 in. bolt-on edge 164-7412
Bucket As 164-7414
Edge — cutting 139-9396 1 per bucket
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
Bucket As — 78 in. base edge 164-7415
Edge — base 164-7433 1 per bucket
Bucket Ar — 78 in. bolt-on edge 164-7413
Bucket As 164-7415
Edge — cutting 139-9397 1 per bucket
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
536
Skid Steer Loader GET / Work Tools
FAB WORK TOOLS — GET
BUCKETS/FORKS (continued)
Multi Purpose Part No.
Bucket Ar — 60 in. base edge 154-5004
Bulldozer As 159-5345
Edge — base 154-5037 1 per dozer
Clam As 149-4232
Edge — base 149-5435 1 per clam
Bucket Ar — 60 in. bolt-on edge 154-5045
Bucket Ar 154-5004
Edge — cutting 135-9394 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 60 in. bolt-on teeth 154-5045
Bucket Ar 154-5004
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
Bucket Ar — 66 in. base edge 154-5008
Bulldozer As 159-5346
Edge — base 154-5059 1 per dozer
Clam As 154-5053
Edge — base 149-5436 1 per clam
Bucket Ar — 66 in. bolt-on edge 154-5047
Bucket Ar 154-5008
Edge — cutting 135-9395 1 per bucket
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 66 in. bolt-on teeth 154-5048
Bucket Ar 154-5008
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
Bucket Ar — 72 in. base edge 154-5010
Bulldozer As 159-5347
Edge — base 154-5077 1 per dozer
Clam As 154-5070
Edge — base 149-5437 1 per clam
Bucket Ar — 72 in. bolt-on edge 154-5049
Bucket Ar 154-5010
Edge — cutting 135-9396 1 per bucket
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
Bucket Ar — 72 in. bolt-on teeth 154-5050
Bucket Ar 154-5010
Tooth 132-4720 8 per bucket
Screw — Flathead 159-2953 2 per tooth
Locknut 8T4778 2 per tooth
537
Skid Steer Loader GET / Work Tools
FAB WORK TOOLS — GET
BUCKETS/FORKS (continued)
Industrial Grapple Bucket Part No.
Bucket Ar — 60 in. base edge 157-7223
Bucket As 169-8941 1 per bucket arrangement
Edge — base 149-5435 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 60 in. bolt-on edge 157-7226
Bucket Ar 157-7223 1 per bucket arrangement
Edge — cutting 135-9394 1 per bucket arrangement
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 66 in. base edge 157-7224
Bucket As 169-8942 1 per bucket arrangement
Edge — base 149-5436 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 66 in. bolt-on edge 157-7227
Bucket Ar 157-7224 1 per bucket arrangement
Edge — cutting 135-9395 1 per bucket arrangement
Screw — Flathead 159-2953 8 per edge
Locknut 8T4778 8 per edge
Bucket Ar — 72 in. base edge 157-7225
Bucket As 169-8943 1 per bucket arrangement
Edge — base 149-5437 1 per bucket assembly
Fork As — Grapple 156-0890 2 per bucket arrangement
Bucket Ar — 72 in. bolt-on edge 157-7226
Bucket Ar 157-7225 1 per bucket arrangement
Edge — cutting 135-9396 1 per bucket arrangement
Screw — Flathead 159-2953 11 per edge
Locknut 8T4778 11 per edge
Industrial Grapple Forks Part No.
Fork Ar — 66 in. 162-8139
Fork As — Carriage 169-3567 1 per fork arrangement
Fork As — Grapple 156-0890 2 per fork arrangement
Tine 162-8154 9 per fork arrangement
Pin — Spring 3E4370 1 per tine
Fork Ar — 72 in. 163-4812
Fork As — Carriage 169-3568 1 per fork arrangement
Fork As — Grapple 156-0890 2 per fork arrangement
Tine 162-8154 11 per fork arrangement
Pin — Spring 3E4370 1 per tine
Pallet Forks Part No.
Carriage As 149-1411
Fork Gp — Pallet (36 in.) 151-5134 2 per carriage assembly (Optional)
Fork Gp — Pallet (42 in.) 149-1412 2 per carriage assembly (Optional)
Fork Gp — Pallet (48 in.) 161-2437 2 per carriage assembly (Optional)
538
Skid Steer Loader GET / Work Tools
FAB WORK TOOLS — GET
TOOTHBARS
Series I (for use with Base Edge only)
60" 66" 72"
Toothbar Part No. 136-8734 136-8735 136-8736
Bucket Assembly (GP) 165-6152 165-6153 165-6154
Bucket Arrangement (MP) 154-5004 154-5008 154-5010
Fasteners
Bolts (2) 8S9093 (2) 8S9093 (2) 8S9093
Nuts (2) 2J3507 (2) 2J3507 (2) 2J3507
Lockwashers (2) 3B4516 (2) 3B4516 (2) 3B4516
Washers (2) 5P8250 (2) 5P8250 (2) 5P8250
TOOTHBARS
Series II (for use with Bolt-On Cutting Edge)
60" 66" 72"
Toothbar Part No. 159-0330 159-0340 159-0350
Bucket Assembly (GP) 165-6152 165-6153 165-6154
Cutting Edge 135-9394 139-9395 135-9396
Fasteners
Bolts (2) 8S9093 (2) 8S9093 (2) 8S9093
Nuts (2) 2J3507 (2) 2J3507 (2) 2J3507
Lockwashers (2) 3B4516 (2) 3B4516 (2) 3B4516
Washers (2) 5P8250 (2) 5P8250 (2) 5P8250
Bucket Arrangement (MP) 154-5004 154-5008 154-5010
Cutting Edge 135-9394 135-9395 135-9396
Fasteners
Bolts (2) 8S9093 (2) 8S9093 (2) 8S9093
Nuts (2) 2J3507 (2) 2J3507 (2) 2J3507
Lockwashers (2) 3B4516 (2) 3B4516 (2) 3B4516
Washers (2) 5P8250 (2) 5P8250 (2) 5P8250
539
Skid Steer Loader GET / Work Tools
NOTES
540
Underground Mining
541
UNDERGROUND MINING
542
Width Weight
Machine Model mm kg R2900 R2900 R2800 R2800 R1700 R1700 R1500 R1500
Bucket Arrangement 9EL3304 9EL3302 9DE6368 9DE6367 9DE8662 9DE9680 9DE9037 9DE9529
9EL3305 9EL3300 9EL1628 9EL0615 9EL6711 9EL3169 9DE9930
9DE8230
9DE6747
Bucket Width 3354 3054 3154 3002 2772 2672 2749 2444
Lip Width (mm) (A) 3400 3100 3200 3048 2818 2718 2795 2490
Spade Length (mm) (B) 710 632 710 710 710 614 700 622
Edge Center Width (mm) (C) 576 569 569 569 546 520 510 500
LIP PROTECTION SYSTEM
Underground Mining
Edge End Width (mm) (D) 339 351 349 363 360 335 325 335
Lip Thickness (mm) 50 50 50 50 50 50 50 50
Lip Assembly* 136-6738 135-9650 135-9651 135-9652 135-9653 135-9736 135-9754 135-9757
Weld-on Lug* 109-9139 37.2 9 9 9 9 7 7 7 7
Corner Shroud - LH 135-8196 379 45.3 1 1 1 1 1 1 1 1
Corner Shroud - RH 135-8197 379 55.4 1 1 1 1 1 1 1 1
Transition Shroud - LH 109-9136 373 61.2 1 1 1 1 1 1 1 1
Transition Shroud - RH 109-9135 373 49.4 1 1 1 1 1 1 1 1
Straight Shroud 109-9131 250 49.4 2
Straight Shroud 109-9132 330 73.2 2 5 4 2 1 1
Straight Shroud 109-9133 420 73.2 3 1 1 1 1 2
Straight Shroud 109-9134 470 9 2 2 2
Crescent Pin ◊135-9575◊ 1.1 9 9 9 9 7 7 7 7
Spring Retainer ◊109-9143◊ 0.05 18 18 18 18 14 14 14 14
Shroud Heel (Straight)** 157-1019 250 30.9
Shroud Heel (Curve)** 157-1027 250 28.5
Shroud Heel (Straight) 138-6529 175 13.8
Shroud Heel (Curve) 138-6551 175 13.4
* Weld-on lugs are included in lip assembly.
** Use heel shrouds on bucket heel for wear protection. The number needed will vary with bucket size and desired protection. See drawings below.
◊ Longer pin 138-6512 and rubber plug 138-6528 are optional retention parts.
Use 1 plug per pin. A 22.5°
45°
Tips and Adapters***
D 15.7
Adapters w/ARM C 50
Center 114-0464 116-7464
RH 114-0465 116-7465
LH 114-0466 116-7466 11
Lip
Tips B
Heavy Duty Abrasion 9N-4453
Heavy Duty Pin 114-0468 Base Edge
Heavy Duty Retainer 107-3469
*** J460 for 50 mm edges.
Caterpillar’s Ground Engaging Tool (GET) Lip Protection System is designed primarily for Caterpillar Elphinstone
loaders, but can be used on any underground or surface bucket with a 50 mm lip. The system features pin-on
shrouds which can be used between teeth or used together to create a continuous edge. Shrouds are available in
multiple widths to fit virtually any bucket. Caterpillar Elphinstone loaders which typically use 50 mm lips include
the R1500, R1700, R2800, R2900, 988, 988B, 988F, and 988G.
Pin-On Shrouds
Shrouds are made from Caterpillar’s through-hardened DH-2 alloy steel for superior hardness, wear resistance and
strength. The sharp profile provides good penetration which is maintained throughout the life of the shrouds. All
shrouds mate up evenly to create a continuous edge. When teeth are required for extra penetration, straight shrouds
can be used between tips and adapters as an alternative to bolt-on or weld-on edge protection options.
Shrouds come in three styles: straight (in four widths), transition (left and right hand) and corner (left and right
hand). Transition shrouds are used on spade lips where the angled sides of the lip meet the leading, flat portion.
Corner shrouds have extra steel to combat the higher wear rates experienced in the corners.
543
Underground Mining
Retention System
Each shroud locks into a lug which is welded to the lip. A crescent shaped pin keeps the shroud locked into the
lug. Spring retainers are placed on both sides of the lug to keep the crescent retainer in place. This retention sys-
tem is very positive and requires no special tools. As an added feature, the pins and retainers are typically reusable.
The crescent shape of the pin minimizes interference with adjacent lugs or adapters to facilitate ease of installa-
tion and removal. Pins and springs sit on the lip and install into cavities in the lugs.
Weld-On Lug
There is one weld-on lug used with all shrouds. Part number is 109-9139. The lug is only welded in the front (A)
and in the slot (B). Shrouds can be used to help position lugs before welding. Lugs for corner shrouds and transi-
tion shrouds should be located first, then space straight shrouds evenly in the remaining spaces. Slide the appro-
priate shroud into the lug, push the lug tight against the lip in the correct position while pushing the lug against the
shroud. Tack the lug in this position and finish welding after removing the shroud. Note that lugs for the transition
shrouds will be at 5 degree angles.
In the front of each lug (A), fill the 8 mm groove, then cover with a 10 mm fillet weld. In the slot (B), use a 12 mm
minimum fillet weld. This design provides substantial weld strength and ensures the lugs are not pulled off the lip
in service which reduces maintenance requirements.
Another feature which reduces maintenance is that lugs stop shrouds from being driven into the lip and beating it
in. As a result, lips don’t need to be built up or rebeveled and lugs do not have to be removed and rewelded far-
ther back to keep shrouds tight.
All shrouds lock into the weld-on lug instead of going over it to keep shroud throwaway material to a minimum.
This causes much of the lug to be exposed, but very little wear occurs due to a shadow effect from the shrouds.
544
Underground Mining
Shrouds fit the same lip profile as standard Caterpillar adapters except an extra 45° bevel at the front is used. This
small bevel allows clearance for an internal radius on the shroud to minimize stress levels. The lips used and
offered by Caterpillar are Bisalloy 80 steel which is also Elphinstone’s primary material. Bisalloy 80 is well proven
in underground applications. Lip dimensions which provide good fitup for continuous edge configurations in var-
ious Elphinstone buckets are listed on page 542. Lips should overhang the bucket sidebar 23 mm on each end for
best fit of the corner shrouds.
Heavy duty J460 size tips and adapters from 988 rock buckets perform very well underground. Adapter part num-
bers are 114-0464/5/6 and the preferred tip style is the heavy duty abrasion, 9N4453. Heavy duty retention pcs are
114-0468 pin and 107-3469 retainer assembly. Shrouds are designed to not interfere with installation and removal
of tip pins.
These adapters are also available with Caterpillar abrasion resistant material (ARM) in the grooves on the bottom
side and a strip on the top for even greater wear resistance. Part numbers for these are 116-7464/5/6.
545
Underground Mining
Installation
1. Rotate the back portion of the shroud into the lug and slide back as far as it will go.
2. Lay a crescent pin on the lip and tap it into lug until centered. It will fill the space
created when the shroud was pushed back. This should require only light taps
with a hammer. The pin is symmetric so orientation does not matter. In some
setups and for corner shrouds the pin will only install from one side.
3. Lay two spring retainers on the lip and tap into the slots at the back of the lug.
Be sure the spring is oriented as shown above and the pin is centered in the lug.
When in all the way, the spring protrusion locks into place and the leading end
of the spring sits outside the pin.
Removal
1. Clean all around the lug and pin with a high pressure water hose to remove dirt and
fines.
2. Decide which way you’re going to drive the pin out. In some setups the pin can only
go in and out from one side.
3. Remove the spring blocking the pin from going the chosen direction. The other
spring can remain in place. Remove the first spring by tapping it on through the lug
in the same direction in which it was installed. Use a small diameter punch to get it
started, then continue to punch from behind or on the leading edge of the spring
which is now exposed.
4. Use a punch (a spare pin can be used) and hammer to drive the pin out. The hole in
the end of the pin can also be used as a prying and driving surface once exposed.
For the corner shroud it may be helpful to first drive the pin towards the sidebar to
loosen it before driving back the other way to remove. Be sure to remove both
springs first.
5. Slide the shroud forward and rotate out of the lug.
6. Clean the lug to remove any dirt before the next shroud is installed. This is also a
good time to inspect the lug welds for cracks and repair as required.
7. If reusing the pin, be sure to grind off any burrs and clean off any dirt which may
interfere with reinstallation. Clean dirt from the springs before reuse as well.
Always wear safety glasses when installing and removing GET.
546
Underground Mining
NOTES
547
Underground Mining
NOTES
548
Paving Products
549
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
Mounting
Block
138-0697
140-2864
138-0678
550
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
113-0328
117-3887
117-4076
551
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
113-0312
552
Paving Products
COLD PLANERS AND ROAD RECLAIMERS
553
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
554
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
COLD PLANER CUTTING EDGES FOR PM-565 (S/N 3TK) AND ALL PM-565/B
Part __Length Thickness _ Width __
Number inch mm inch mm inch mm Plow Bolt Nut Washer
132-1083 24 610 3/4 19 8 203 (6) 3F5108 (6) 7X0448 (6) 8T4122
132-1084 36 914 3/4 19 8 203 (9) 3F5108 (9) 7X0448 (9) 8T4122
4T3030 48 1214 3/4 19 8 203 (12) 3F5108 (12) 7X0448 (12) 8T4122
132-1085 60 1524 3/4 19 8 203 (15) 3F5108 (15) 7X0448 (15) 8T4122
555
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
556
Paving Products
REPLACEMENT ROTOR ASSEMBLIES
557
Paving Products
SOIL STABILIZERS
Nut /Washer/Bolt
U-Bolt
Chopper Blade
558
Paving Products
SOIL STABILIZERS
Retaining Nail
Tool Holder
Straight Tool
Holder
Optional
559
Paving Products
RM250 / SM250
COMBINATION ROTOR — Designed to pulverize asphalt layers or blend additives with soil by simply
changing bits. Bits are mounted in drive-in, knock out holders which accept either point-attack reclamation bits or
spade-type bits for stabilization applications. All bit holders, except end ring holders are breakaway design.
Replaceable, hard faced end rings protect rotor mandrel from wear.
Bit
Holder
Flighting
Bit
Breakaway Holder
560
Cold Planer (formerly called Pavement Profiler) blades are made of heat treated high carbon steel to scrape material from the pavement. They are bolted to
the rear side of the drum housing.
561
Paving Products
COMPACTORS
562
Paving Products
ASPHALT PAVERS
ASPHALT PAVER
Auger Half-Segments Front of Machine
Screed
Hopper Front Flashing
Auger Quarter-Segments
FASTENING HARDWARE
Model Qty. Part No.
AP-800B
Bolt-Auger Segment & Reverse Kicker Mounting 12 7X0334
Bolt-Bed Plate Mounting 36 8T7994
Washer-Auger Segment & Bed Plate Mounting 36 8T4223
Nut-Auger Segment & Bed Plate Mounting 36 6V8188
AP-1050
Bolt-Auger Segment & Reverse Kicker Paddle Mounting 16 7X0334
Bolt-Reverse Kicker Tip Mounting 8 4F3648
Washer-Auger Segment, Reverse Kicker Paddle & Tip Mounting 28 8T4223
Nut 26 6V8188
Bolt-Bed Plate Mounting 24 8T7994
Washer-Bed Plate Mounting 24 8T4223
Nut-Bed Plate Mounting 24 6V8188
AP-1000
Bolt-Auger Segment Mounting 16 7X0334
Bolt-Bed Plate Mounting 24 8T7994
Washer-Auger Segment, Reverse Kicker Paddle & Tip Mounting 50 8T4223
Nut-Lock-Auger Segment Mounting 50 1K6872
Washer-Bed Plate Mounting 24 8T4223
Nut-Bed Plate Mounting 24 6V8188
Bolt-Reverse Kicker Tip Mounting 8 4F3648
563
Paving Products
ASPHALT PAVERS
Baffle
Wear Plate
VIP SCREED
Screed Length 10 ft. (3048 mm) 8 ft. (2438 mm)
Qty. Part No. Qty. Part No.
Main Wear Plate 1 7R7518 1 7R7521
Wear Plate Extender (LH) 1 7R7519 1 7R7522
Wear Plate Extender (RH) 1 7R7519 1 7R7522
Wear Plate Extension (small) (LH) 1 7R7520 1 7R7520
Wear Plate Extension (small) (RH) 1 7R7520 1 7R7520
Left Nose Bar (main) 1 7R7523 1 7R7535
Right Nose Bar (main) 1 7R7524 1 7R7529
Left Nose Bar (small) 1 7R7527 1 7R7527
Right Nose Bar (small) 1 7R7528 1 7R7528
Left Nose Bar Extension 1 7R7525 1 7R7531
Right Nose Bar Extension 1 7R7526 1 7R7530
Stud 64 8T7998 52 8T7998
Shim 20 8C7135 20 8C7135
Shim 20 8C7136 20 8C7136
Bolt 32 5C6565 26 5C6565
Flatwasher 96 8T4223 78 8T4223
Locknut 64 2K0564 52 2K0564
564
Paving Products
ASPHALT PAVERS
NOSE BAR
SHIM
SPACER BAR
SPACER
SPACER MAIN WEAR
PLATE
NOSE BAR
565
Paving Products
ASPHALT PAVERS
PAVEMASTER SCREED
Screed Base
Screed Plate
PAVEMASTER SCREED
Lengths Locknut* Flatwasher
inch mm Plate Assembly Qty. Part No. Qty. Part No.
10.0 ft. 3048 mm 8C8309 36 1K6872 36 2M0849
8.0 ft. 2438 mm 8C7211 30 1K6872 30 2M0849
Extension
0.5 ft. 152 mm 5E9417 6 1K6872 6 2M0849
1.0 ft. 305 mm 5E9421 9 1K6872 9 2M0849
2.0 ft. 610 mm 5E9458 16 1K6872 16 2M0849
3.0 ft. 914 mm 5E9430 12 1K6872 12 2M0849
* The new torque specification for tightening nuts that fasten screed plate assemblies to the screed base is 60 ± 12 N•m (45 ± 9 ft. lbs.).
566
Paving Products
WINDROW ELEVATORS
Made of high carbon steel, these blades are bolted to the elevator housing to scrape material to the elevator. The
following part numbers are used on all serial numbers of the 601B and 851B Windrow Elevators.
MOUNTING HARDWARE
Wing Blades Side Blades Bottom Blade
Qty. Part No. Qty. Part No. Qty. Part No.
Bolt 14 1D5166 4 A00321
Lockwasher 14 3B4508 4 3B4508
Flatwasher 14 4B4280 4 4B4280
Nut 14 1D4719 4 1D4719
Capscrew 10 8T4330 (851B)
8 8T4330 (601B)
567
Paving Products
NOTES
568
Motor Graders
569
Motor Graders
570
Motor Graders
571
Motor Graders
572
Motor Graders
573
Motor Graders
Note: The 140H & 143H motor graders use both 0.63" (16 mm) and 0.75" (19 mm) bolts depending on the blade
group number. See table below for application.
Blade Group No. Bolt Size
8X8011 0.63" (16 mm)
8X8016 0.63" (16 mm)
112-4520 0.75" (19 mm)
112-4521 0.75" (19 mm)
574
Motor Graders
Moldboard
Length Dimensions
feet mm W-H-T (inch) W-H-T (mm) Part
13'-14' 3962-4267 mm 75" x 15.25" x 0.38" 1905 x 387 x 10 4D5821*
12'-13' 3658-3962 mm 63" x 15.25" x 0.38" 1600 x 387 x 10 4D5820**
* Use 8W5266 for larger radius moldboards. Radius is 16.25" (413 mm).
** Use 8W5265 for larger radius moldboards. Radius is 16.25" (413 mm).
*** Blank Plate without Bolt Holes.
576
CAT GRADER EDGES . . .
Edge Width
On motor grader cutting edges, width translates to wear material, so as a general rule,
for the longest life, use the widest edge. An 8" (203 mm) edge, for example, will give
you 100% more available wear material and edge life than a 6" (152 mm) edge… at
only about 35% more cost. In addition, hardware usage and total downtime will be cut
by 50%. To extend cost savings even farther, a 10" (254 mm) cutting edge will last
three times longer than a 6" (152 mm) edge when used under comparable conditions.
Crowning describes a normal wear pattern in which the cutting edge conforms to the
material being graded. When extreme crowning occurs or when finishing applications
require tolerances less than 1/4" (6 mm), the best value may be in selecting a
narrower and thinner cutting edge. This approach reduces costs by minimizing the
amount of usable iron that must be thrown away.
Edge Thickness
Penetration requirements determine how thick your edge should be. The easier mate-
rial is to penetrate, the thicker the edge you should use. This simple chart illustrates
how wear material increases with thickness.
577
Motor Graders
Cat moldboard and overlay end bits are made from tough, thru-hardened
DH-2 steel. Moldboard end bits protect the moldboard itself from wear
and damage. Overlays provide additional wear protection and strength for
both the moldboard and the cutting edge.
Reversible Overlays
• Used with curved edges.
• Protects and strengthens both moldboard and cutting edges.
• Reversible design provides “second life” for greater value.
Flat Overlays
• Provides same moldboard and edge protection for flat edges. Not avail-
able for 14G or 16G graders.
578
Motor Graders
This system is made up of adapters that bolt up to the moldboard and indi-
vidual bits that fit into the adapter.
The Caterpillar GraderBit System has been designed primarily for maintaining
and reconditioning gravel roads; including ice and snow removal. In addition, a
continuous Caterpillar GraderBit configuration can be used on paved surfaces.
There are two major customer groups that should be targeted — mines and
governmental bodies. Since aggregate size is often different on governmental vs.
mining haul roads, each group has an adapter designed for its needs. The mining
adapter has a wide gap between the Cat GraderBits to accommodate large
aggregate. Since many country roads use smaller aggregates, the gap is narrower
on these adapters. Either adapter can be sold in either market providing bolt hole
diameters match-up. See part number information.
Features/Benefits
The Caterpillar GraderBit System has many benefits. One of the most important
is the increase in wear life over standard, heat-treated edges. However, the
Caterpillar GraderBit System costs much more than a set of standard edges.
Successful selling will require a customer’s understanding of ALL benefits.
Selling wear life as the only feature will result in fewer sales.
Features Benefits
✔ Serrated design ✔ Excellent penetration, conserves gravel and
increases productivity
✔ Tungsten carbide wear material ✔ 6-10 times greater wear life than standard
cutting edge (10" x 1"; 254 mm x 25 mm)
✔ 12-15 times greater wear life than standard cutting
edge (8" x 3/4"; 203 mm x 19 mm)
✔ Large decrease in grade blade maintenance ✔ Reduced downtime
✔ Smoother haulroads ✔ Longer tire and mechanical life, faster travel
speeds
✔ Four Cat GraderBit widths ✔ Allows several edge configurations, including
continuous edge
Detailed Comments on Features & Benefits
1. One of the benefits that can be seen immediately is the ease of penetration
compared to standard continuous edges. Using a serrated configuration,
initial penetration is easier. Ridges are removed and trenches are filled in one
pass. Material is allowed to pass between the Cat GraderBits which helps
conserve gravel. All of these benefits help cut costs which will maximize
profitability.
2. Tungsten Carbide is used on the Cat GraderBits at the wear area. This is the
same material used in Cat abrasion-resistant material edges. It is an extremely
hard alloy which offers excellent wear life in ground engaging tools. Cat
GraderBit wear life will depend on the application. In a mining haulroad
application, wear life should range between 6-8 times greater than heat-
treated edges. On county roads, it should average 8-10 times the life. A mine
will typically have larger aggregate and higher impact than a county road,
thus wear life is less than a county road application.
579
Motor Graders
Operation
Proper operation is very important to assure acceptable Caterpillar GraderBit
system life. There are five points to stress with the operators.
1. The face of the carbide tile should be perpendicular to the ground.
2. Moldboard sidecast angle should be between 0-10°.
3. Penetration depth should be approximately 1-1.5" (25-38 mm).
4. Operating speed should be held to 4-6 mph. In higher impact appli-
cations, slower speeds will reduce potential for breakage.
5. If machine is equipped with an accumulator, make sure it’s on when
operating GraderBit System.
580
Motor Graders
Warranty
The adapter, and Cat GraderBit (with the exception of the tungsten car-
bide) are warranted against breakage under the GET warranty. The
tungsten carbide and the braze material are warranted under the standard
6-month new parts warranty.
Governmental Bid Specifications for Motor Grader Edges/Bits
Many governmental units periodically review their bid specifications for
purchasing motor grader cutting edges and end bits. It is important to be
aware of when such reviews take place and provide recommendations.
Caterpillar suggests that physical properties, rather than chemical properties,
represent the most accurate guide to edge performance.
3. Breakage guarantee.
Supplier warrants that if an edge breaks during operation, it will be
replaced free of charge (with the exception of high-carbon edges). The
guarantee translates into positive benefits:
• Fewer edges purchased.
• Users save money. Since the guarantee reduces the user’s risk, he can
use 8" (203 mm) wide edges instead of 6" (152 mm) wide edges in most
applications. This means two extra inches of wear material are available.
Cat Motor Grader edges meet all of these requirements.
581
Motor Graders
582
Motor Graders
Benefits
✔ Curved double bevel design for excellent penetration
✔ Standard highway bolt hole pattern — fits all makes of
motor graders
✔ Countersunk bolt holes to protect bolt heads
✔ Rust preventive coating for long, rust-free storage
✔ Backed by Caterpillar Parts Warranty covering defects in
material and workmanship
*Subject to certain terms and conditions. See your Caterpillar Dealer for warranty statement.
For additional strength and wear resistance specify Caterpillar Through-Hardened DH-2 Edges
583
Motor Graders
584
Motor Graders
585
Motor Graders
586
Motor Graders
NOTES
587
Motor Graders
NOTES
588
Rippers/Scarifiers
589
Rippers/Scarifiers
Example: R 500
Alpha character indicates this Numeric digits indicate relative
as a ripper tip. ripper family size (5.00").
590
Rippers/Scarifiers
D11N RIPPER
591
Rippers/Scarifiers
D11R RIPPER
592
Rippers/Scarifiers
D10 RIPPER
593
Rippers/Scarifiers
D10N RIPPER
594
Rippers/Scarifiers
D10R RIPPER
595
Rippers/Scarifiers
D9H RIPPER
596
Rippers/Scarifiers
D9L RIPPER
597
Rippers/Scarifiers
D9N RIPPER
598
Rippers/Scarifiers
D9R AND D9R HD RIPPER
599
Rippers/Scarifiers
D8N RIPPER
600
Rippers/Scarifiers
D8K RIPPER
601
Rippers/Scarifiers
D8L RIPPER
602
Rippers/Scarifiers
D8R RIPPER
603
Rippers/Scarifiers
604
Rippers/Scarifiers
605
Rippers/Scarifiers
Top to
2nd pin Front
hole Shank
Length
Total
Assembly
Length
Degree
Ripping
Angle
Thickness
Width
606
Rippers/Scarifiers
607
Rippers/Scarifiers
• After you have the desired length, mark across the measured points and cut.
• Weld on the new adapter.
608
Rippers/Scarifiers
Adapter Nose
Shank Adapters and Adapter Noses
• Used to repair Caterpillar shanks or to convert competitive shanks to
Caterpillar tips and protectors.
• Forged DH-2 steel.
• Adapters available for all models; noses available for all adapters
except D11N single shank.
Lifting Eye
Shank 8J4889
Retainer
6Y9704
Protector
Protector
Tip
D11N Multi-Shank, D11N Multi-Shank,
D10, D10N, D9L D10, D10N, D9L
D11N Single Shank
(Old style one-pin protector)
Shank
Protector
(shorter option
available)
Tip
Adapter
D9G, D9H, D9N, D8H, 24H, D5, D6, D6M, 977, D11N, D11R, D10N, D11N, D11, D10N,
D8K, D8L, D8N 973, 16 D10R, D9R, D9N, D8N, D8R D10, D9L
Extended Protector Ripper Multi-Piece Protector Extended 2 Pin
One-Piece Protector
609
Rippers/Scarifiers
Pins
OLD NEW
Ripper
Tip Ripper
Tip
Shank Shank
Tips
• DH-3 steel for better heat resistance.
• Center-rib design stays sharp longer.
• Centerline and penetration styles available — use penetration style for
easier surface penetration. Centerline Tip
• Various lengths to match job conditions — longer tips move through
the ground easier (sharper) and have less expensive wear material —
shorter tips are stronger.
• Side-pinned for better retention.
• Unconditionally guaranteed against breakage. Penetration Tip
(always install with rib up)
ARM Tips
• DH-3 thru-hardened steel.
• Temper effect elimination.
• Increased ARM impact resistance when factory applied.
• Increased tip life.
• Increased productivity.
• Reduced cost per yard of ripped material. ARM Tip
610
Rippers/Scarifiers
50 DH-3
45
Surface 4 0
Hardness
Rc 35
30 DH-2
25
The advantage of DH-3 over DH-2 material product is when the parts get
HOT, (for example: when the operating temperature of a DH-2 part
exceeds 400°F (200°C)). This exceeds the tempering temperature of DH-2
parts, resulting in a softer part. As the temperature increases above 400°F,
the part continues to get increasingly softer. This does not occur on DH-3
parts until operating temperatures exceed 800°F.
An infra-red gun was pointed at a D10N ripper tip that had been ripping a
relatively long pass. As the tip was raised above the ground level, the tip
temperature was recorded. Many readings were observed and temperature
ranges between 700°F and 900°F were recorded. At the 800°F temperature
range, the DH-2 tip had softened to Rc 35 (from Rc 49), while the DH-3
tip remained at Rc 49. For the remainder of that DH-2 tip’s life, it remained
soft and wore at a higher wear rate than the original Rc 49 wear rate.
In this example, the customer saw a 30-40% increase in life of the DH-3
tip over the DH-2 tip.
611
Rippers/Scarifiers
When severe ripping conditions cause “pin walking” in very short hours or
the loss of a tip can cause extensive damage to other equipment, an impact
ripper style pin and retainer assembly “C” should be used. The retainer
assembly contains a snap ring that locks into the groove on the mating pin.
The impact ripper systems are available on the R500 and R550 rippers
(D9L, D10N, D10, D11N) and are installed as standard equipment on
those sizes of machines leaving the factory.
Care must be taken when installing the impact ripper style pin and retainer (A) Pin assembly with spring clip, (B) Bucket
assembly. It will take some effort to expand the enclosed snap ring with style pin and retainer, (C) Impact ripper style
pin and retainer assembly with snap ring
the tapered end of the pin. Once the snap ring is on the full diameter of the
pin, it then becomes very easy to drive the rest of the way. If the pin is hit
excessively hard, the snap ring could be damaged or even sheared by the
pin groove and result in loss of retention. A final gentle hammer blow is
all that is needed to allow the snap ring to drop into the pin groove.
Once in the groove, it takes a severe hammer blow to remove the pin. In
doing so, the snap ring is sheared or distorted and cannot be reused. The
shoulder of the pin groove also becomes rounded and if reused with a new
retainer assembly, retention capabilities are reduced. Impact ripper pins
and retainer assemblies, therefore, are not considered reusable.
612
Rippers/Scarifiers
The bucket and impact ripper style pins are much stronger than the former
pin assemblies with their drastically reduced center diameter. It was found
that even a slightly bent new pin would wedge solidly in the old diameter
pin bores, and they would have to be burned out. Consequently, the pin
bore diameters on the new ripper shanks are slightly larger. A customer
trying to use an old pin assembly in a new shank will find that the pin will
not grip inside the pin bore.
PIN & RETAINER ASSEMBLIES FOR RIPPER SHANKS WITH COUNTER BORES
New Former
Ripper Size Model Part Number Description Part Number
R450 D8H, D8K, D8L, D8N, 6Y3394 Pin (Bucket Style)
D9E, D9G, D9H, D9N 8E4743 Retainer (Bucket Style)
Pin Assembly (Tip & Upper Protector) 4T2479
Pin Assembly (Lower Protector) 6J8811
138-6450 Pin (Heavy Duty Style)
107-8559 Retainer Assembly (Heavy Duty Style)
R500 D9L, D10N, D10, 6Y3909 Pin (Bucket Style)
D11N MS, 4T4707 Retainer (Bucket Style)
D11R MS, 6Y1204 Pin (Impact Ripper Style)
D10R 6Y1202 Retainer Assembly (Impact Ripper Style)
Pin Assembly 102-90621
*138-6508* Pin (Heavy Duty Style)
113-4709 Retainer Assembly (Heavy Duty Style)
R550 D11N SS, 8E2229 Pin (Bucket Style)
D11R SS 8E2230 Retainer (Bucket Style)
9N4245 Pin (Impact Ripper Style)
6Y1205 Retainer Assembly (Impact Ripper Style)
Pin Assembly 6Y2443
159-0558 Pin (Heavy Duty Style)
134-1809 Retainer Assembly (Heavy Duty Style)
1 3G0500 Pin Assembly was cancelled and replaced by 102-9062 Pin Assembly.
See Service Magazine SEPD0230 from October 31, 1994, for further information.
613
Rippers/Scarifiers
614
Rippers/Scarifiers
Ripper Tips
Ripper tips must provide the customer with three benefits:
1. Maximum wear life for reduced tip costs
2. Sharp profile for penetration and increased productivity
3. Strength for breakage and resistance
Caterpillar has designed these benefits into two types of large ripper tips:
1. Extreme service ripper tips
2. Economy service ripper tips
Extreme Service Ripper Tips.
Available in DH-3 steel to fit the D8 through D11 size extreme service adapters. DH-3 tips are avail-
able in penetration and centerline configurations. Follow these guidelines when choosing Caterpillar
ripper tips:
Penetration Tips
Use in conditions where penetration is difficult. Tips are available
in three different lengths in most sizes.
NOTE: Penetration tips should be installed with the rib facing up.
Centerline Tips
Use in abrasive conditions (laminated or stratified materials) where
penetration is not a problem. Tips are available in three different
lengths in most sizes.
Always use the longest tip available unless excessive breakage
occurs.
All DH-3 ripper tips are forged for strength and thru-hardened for
excellent wear life. The tips are designed with the center-rib to
maintain a sharp profile.
615
Rippers/Scarifiers
D11N Multi-Shank,
D10, D10N, D9L
Protectors
Extended
Protector
Protectors shield the adapters and lower portion of the shank from wear
D9N/D8L/D8N and impact. Failure to use a protector with a large ripper could result in
D9/D8/9B/8B
Protector
early shank and/or adapter replacement due to wear and damage.
Protectors are made from tough DH-2 Steel and thru-hardened for
strength and wear resistance.
Adapter
616
Rippers/Scarifiers
Outline
A) Determine Shank dimensions.
B) Select ripper shank adapters.
C) Select adapter protector.
D) Install System.
E) Complete Caterpillar Ground Engaging Tools Conversion Report Form (PEEP4210).
Conversion Guidelines
1. Measure the width and thickness of the competitive shank where the adapter will be welded to
the shank.
T 2. Select the adapter that will best fit the customer’s application based upon the width and thickness
measurements.
ADAPTER DIMENSIONS
Adapter Used On Caterpillar Competitive Shank
Part No. Machine Width (W) Thickness (T)
104-9279 D11N, D11R 16" (406 mm)-18" (457 mm) 3.5" (89 mm)-4.4" (110 mm)
1U3630 D9L, D10, D10N 12.5" (317.5 mm)-16" (406 mm) 3" (76.2 mm)-4" (101.6 mm)
8E8418 D8, D8L, D9 12.5" (317.5 mm)-14" (355.6 mm) 2" (50.8 mm)-3" (76.2 mm)
103-8115 D9L, D10, D10N, D10R 12.5" (317.5 mm)-14" (355.6 mm) 2" (50.8 mm)-3" (76.2 mm)
3. Protectors may restrict the use of some shank pin holes. If the distance from the
ripper shank pin hole down to the top of the protector (see A in illustration) is
less than the distance from the socket pin hole to the bottom of the socket (see B
B A in illustration) the protector will interfere with the socket. (The socket is the
ripper assembly opening into which the shank fits.)
To avoid interference, use a higher pin hole or trim the top of the protector.
Protector has
caused interference.
w
Pin holes do not line
up. (A is less than B.)
617
Rippers/Scarifiers
The following chart, shows the length the protector extends above the adapter/shank weld.
(No interference should occur with economy service protectors).
EXTENSION OF PROTECTOR ABOVE ADAPTER/SHANK WELD
Area Extending Above
Part No. Protector The Weld
104-9279 9N4621 7.5" (190 mm)
1U3630 1U3644 7.5" (190 mm)
8E8418 6J8814* 2.3" (59 mm)
1U4410 12.5" (318 mm)
103-8115 9W8365 7.5" (190 mm)
6Y8960
*8E1848 sharpened protector can be used where shank bluntness reduces ripping effectiveness.
Installation
These installation guidelines are to be used with Special Instruction SEHS7888 entitled “Installation
of Ripper Shank Adapters.” Information not contained in the Special Instruction is included here.
Follow all pre-heat temperature guidelines. These temperatures have been recommended to reduce
the possibility of cracks in the shank and adapter.
1. Select the proper cut-off angle. The chart below lists the cut-off angles
necessary to achieve a ripping angle of 50 degrees. If a different ripping
angle is desired, vary the cut-off angle.
Adapter Shank
Part No. Cut-off Angle (A°)
104-9279 135°
1U3630 135°
8E8419 112°
A 103-8115 135°
0.5"
If the shank is wider than the adapter, any difference up to 0.5" (2.7 mm)
(12.7 mm) should be filled in with weld. If the difference is greater than 0.5" (12.7 mm),
maximum taper the shank to the adapter at a 3:1 ratio. For example, if the shank is
FIGURE 1 1" (25.4 mm) wider than the adapter, the taper on the shank should be 3"
(76.2 mm) in length (see Figure 2).
4. Weld the adapter in place.
Taper
5. Grind all welded areas smooth. Rough weld surfaces may cause early
3.0" failure.
(76.2 mm)
1.0"
(25.4 mm)
FIGURE 2
618
Rippers/Scarifiers
Outline
A) Determine ripper socket dimensions.
B) Select ripper shank.
C) Install system.
Conversion Guidelines
1. To convert a competitive ripper to a small Cat ripper shank
you need to measure the following:
A
A) socket width
B) socket thickness
B
C) pinhole diameter
(view from bottom of ripper tool bar) D) top of socket to pinhole (to assure that the shank will
at least be flush with the top of the socket when in top
D shank pin hole.)
C
2. Use these measurements to select the Cat shank that best
fits the competitive ripper. The following chart will show
(view from side of ripper tool bar) you the Cat shank that most closely fits the competitive
ripper socket.
619
Rippers/Scarifiers
620
Rippers/Scarifiers
621
Rippers/Scarifiers
622
Rippers/Scarifiers
Conversion Guidelines
for Repair Adapters and Noses
For rippers, there is one repair adapter and four repair adapter noses available for
converting competitive shanks to Caterpillar ripper components. The following
dimensions are needed to make the conversion:
Used on
Caterpillar Competitive Shank
Machine Width Thickness
116°
Repair Adapter Nose 103-8114 D11, D10, D9L 10.83"-12.80" 3.94"
(275 mm-325 mm) (100 mm)
Repair Adapter Nose 4T9776 D9, D8 7.28"-9.25" 3.00"
9U9694 D8R, D8R (185 mm-235 mm) (76.2 mm)
Repair Adapter Nose 8E7350 983, D7, D6, D5 6.88"-9.00" 2.91"
(174.8 mm-228.6 mm) (73.9 mm)
Repair Adapter 9W7488* 983, D7, D6, D5
Repair Adapter Nose 8E7300 963, 955, 951, 941, 5.48"
14, 140, 130, 12, 12D (139.2 mm)
Repair Adapter 107-3361** D10N, D11N MS
D10R, D11R MS
** Use repair adapter 9W7488 when more shank material is needed than is available in 8E7350.
Cut-off angle for 9W7488 is 116°, as shown at left, to achieve 50° ripping angle.
** Two pin protector.
623
Rippers/Scarifiers
NOTES
624
Scrapers
625
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
626
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
627
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 627 (69M, 50K, 4YK, 37V-38V, 6FB, 6HB), 621 (37G, 36V, 6BB, 5JK)
Edge Thickness-inches (mm) 0.88 (22) 1.12 (28) 1.58 (41)
Center Edge-16" (406 mm) (1) 4T6568 (1) 4T2896 (1) 132-4566
ARM Center Edge-16" (406 mm) (1) 140-6779
Bolt (9) 3J2801 (9) 3J2801 (9) 3J2801
Nut (9) 2J3507 (9) 2J3507 (9) 2J3507
End Edge-16" (406 mm) (2) 4T2894
ARM End Edge-13" (330 mm) (2) 140-6778
Bolt (10) 3J2801
Nut (10) 2J3507
End Edge-13" (330 mm) (2) 4T6612 (2) 4T6380 (2) 132-4567
Bolt (10) 3J2801 (10) 3J2801 (10) 3J2801
Nut (10) 2J3507 (10) 2J3507 (10) 2J3507
Router Bit: Standard (2) 4J8665 (2) 4J8665 (2) 4J8665
Router Bit: Quick-Change # # #
Router Bit: ARM Standard (2) 143-3065
Bolt (10) 4F4042 (10) 4F4042 (10) 4F4042
Nut (10) 2J3507 (10) 2J3507 (10) 2J3507
* Use 8J2928 bolt when using 8W2037 spacer (part of rock kit arrangement).
♦ Requires thicker reinforcement on all but 637E scraper. See Special Instruction SMHS 8410 for installation instructions.
# See page 638 for Quick-Change part numbers.
628
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 623 (26U, 5SG, 61E, 6DB), J619 (43F), J621 (43H)
Edge Thickness-inches (mm) 0.88 (22) 1.12 (28)
Center Edge-16" (406 mm) (1) 4T2887 (1) 4T2895
ARM Center Edge-16" (406 mm) (1) 140-6847
Bolt (10) 4F4042 (10) 4F4042
Nut (10) 2J3507 (10) 2J3507
Center Edge-13" (330 mm) (1) 4T6620
Bolt (10) 4F4042
Nut (10) 2J3507
End Edge-16" (406 mm) (2) 4T2894
Bolt (10) 4F4042
Nut (10) 2J3507
End Edge-13" (330 mm) (2) 4T6612 (2) 4T6380
ARM End Edge-13" (330 mm) (2) 140-6778
Bolt (10) 4F4042 (10) 4F4042
Nut (10) 2J3507 (10) 2J3507
Router Bit: Standard (2) 4J8665 (2) 4J8665
Router Bit: Quick-Change # #
Router Bit: ARM Standard (1) 143-3065
Bolt (10) 1D4709 (10) 1D4709
Nut (10) 2J3507 (10) 2J3507
MODEL 619C (68F, 45F, 48F)
Edge Thickness-inches (mm) 0.88 (22) 1.12 (28)
Center Edge-16" (406 mm) (1) 4T6567 (1) 4T2891
Bolt (8) 3J2801 (8) 3J2801
Nut (8) 2J3507 (8) 2J3507
End Edge-16" (406 mm) (2) 4T2894
Bolt (10) 3J2801
Nut (10) 2J3507
End Edge-13" (330 mm) (2) 4T6612 (2) 4T6380
Bolt (10) 3J2801 (10) 3J2801
Nut (10) 2J3507 (10) 2J3507
Router Bit: Standard (2) 4J8665 (2) 4J8665
Router Bit: Quick-Change # #
Bolt (10) 4F4042 (10) 4F4042
Nut (10) 2J3507 (10) 2J3507
MODEL 615 (46Z1-1342, 47Z1-1339)
Edge Thickness-inches (mm) 0.88 (22)
Center Edge-13" (330 mm) (1) 7T5104
Bolt (9) 5J2409
Nut (9) 2J3505
Washer (9) 5P8249
End Edge-13" (330 mm) (2) 7T5105
Bolt (8) 5J2409
Nut (8) 2J3505
Washer (8) 5P8249
Router Bit: Standard (2) 4J8665
Router Bit: Quick-Change #
Bolt (8) 1D4709
Nut (1) 2J3507
MODEL 615 (46Z1343-UP, 47Z1340-UP)
Edge Thickness-inches (mm) 0.88 (22)
Center Edge-16" (406 mm 9W5807
Bolt (9) 4J9058
Nut (9) 2J3507
Washer (9) 5P8250
End Edge-16" (406 mm) 9W5806
End Edge-13" (330 mm) 9W5810
Bolt (8) 4J9058
Nut (8) 2J3507
Washer (8) 5P8250
Router Bit: Standard (1) 4J8665
Router Bit: Quick-Change #
Router Bit: Clean-Up 9W5808
Bolt (Standard & Quick-Change) (8) 1D4637
Bolt (Clean-up) (6) 1D4709
Nut (1) 2J3507
Washer (1) 5P8250
# See page 638 for Quick-Change part numbers.
629
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODELS 442 (83E, 33F), 435 (45D, 35E, 85F, 88F), 428 (44D, 43D)
Edge Thickness-inches (mm) 0.88 (22) 1.12 (28)
Center Edge-16" (406 mm) (1) 4T6567 (1) 4T2891
Bolt (8) 1J5607 (8) 1J5607
Nut (8) 2J3507 (8) 2J3507
Center Edge-13" (330 mm) (1) 4T6621
Bolt (8) 1J5607
Nut (8) 2J3507
End Edge-16" (406 mm) (2) 4T2894
Bolt (10) 1J5607
Nut (10) 2J3507
End Edge-13" (330 mm) (2) 4T6612 (2) 4T6380
Bolt (10) 1J5607 (10) 1J5607
Nut (10) 2J3507 (10) 2J3507
Router Bit (2) 1J3599 (2) 1J3599
Bolt (5) 5J4773 (5) 5J4773
Nut (5) 2J3506 (5) 2J3506
a For level cut operation: keep material from windrowing between the router and edge.
630
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODEL 80 (5W)
Edge Thickness-inches (mm) 0.88 (22)
Center Edge-16" (406 mm) (1) 4T6565
Bolt (9) 4F4042
Nut (9) 2J3507
Center Edge-13" (330 mm) (1) 4T6617
Bolt (8) 4F4042
Nut (8) 2J3507
End Edge-13" (330 mm) (2) 4T6612
Bolt (10) 4F4042
Nut (10) 2J3507
Router Bit (2) 8F7232
Bolt (5) 5J4773
Nut (5) 2J3506
MODEL 80 (2D)
Edge Thickness-inches (mm) 0.88 (22)
Center Edge-13" (330 mm) (1) 4T6622
Bolt (17) 5J4772
Nut (17) 2J3505
End Edge-13" (330 mm) (2) 4T6624
Bolt (7) 5J4772
Nut (7) 2J3505
Router Bit (2) 8F7232
Bolt (10) 5J4773
Nut (10) 2J3506
631
Scrapers
REPLACEMENT PARTS FOR SCRAPERS
MODEL 60 (1D)
Edge Thickness-inches (mm) 0.75 (19)
Center Edge-10" (254 mm) (1) 4T2881
Bolt (12) 4F7827
Nut (12) 2J3506
End Edge-10" (254 mm) (2) 4T2884
Bolt (6) 4F7827
Nut (6) 2J3506
Router Bit (2) 9F1831
Bolt (8) 4F3654
Nut (8) 4K0367
MODEL 40 (1W)
Edge Thickness-inches (mm) 0.62 (16)
Center Edge-10" (254 mm) (1) 4T2874◊
Bolt (10) 4F3672
Nut (10) 2J3506
Center Edge-8" (203 mm) (1) 4T2962
Bolt (10) 4F3672
Nut (10) 2J3506
End Edge-8" (203 mm) (2) 4T2965
Bolt (8) 4F3672
Nut (8) 2J3506
Router Bit None
632
Scrapers
TEETH FOR ELEVATING SCRAPERS
Bolt-on Adapters
623, J621, J619 615
MODEL 633, 639 615 (47Z1340-UP) (47Z1-1339) 613
Adapter 9W9971* 9J2307 4T5805 9J8455
Bolt (2) 1J4947 (2) 1J3527 (2) 1J0849 (2) 5F8933
Nut (2) 2J3507 (2) 2J3507 (2) 2J3505 (2) 2J3506
Washer (2) 5P8250 (2) 5P8250 (2) 5P8248 (2) 5P8248
No. of Teeth Per Group 5 4 5 4
Tip (one of following types)
Short 1U3351 1U3301 1U3301 1U3251
Long 1U3352 1U3302 1U3302 1U3252
Penetration 9J4359 9J4309 9J4309 9J4259
Wide 107-3350 107-3300 107-3300 3G8250
Sharp 9W2359 9W8309 9W8309 9W8259
Heavy Duty Long 9N4352 9N4302 9N4302 9N4252
Heavy Duty Abrasion 9N4353 9N4303 9N4303 9N4253
Pin 8E6358 9J2308 9J2308 8E6258
Retainer Assembly 8E6359 8E6259 8E6259 8E6259
Heavy Duty Pin 114-0358
Heavy Duty Retainer Assembly 114-0359
* Recommended for use only with 9W9972 notched center edge. Use 8J3137 end edges with 86H models. Use 9J1109 end edges with 19W models.
633
Scrapers
634
Scrapers
635
636
Scrapers
• Level Cut Arrangement Used for finish work or very high impact
loading where stinger breakage is a problem.
637
Scrapers
ROUTER BITS
Caterpillar router bits help prevent wear and costly damage to the scraper bowl.
Features Benefits
✔ Forged DH-2 steel ✔ Guaranteed against breakage
✔ Thru-hardened ✔ Prolongs wear life
✔ Reversible (except Quick-Change and 613C) ✔ Two wear edges on one piece
Standard Router Bits are available for all models and are recommended
for most applications.
Clean-Up Router Bits are used with edges in the level cut arrangement
to reduce flow of loose material around the bowl corners. Special router
bits are required for the 615; two-position router bits for the 613C can be
installed in the “clean-up” position. (9W4903)
ARM Router Bits are available for virtually all scrapers. They are for use
in high abrasion, low-impact applications. ARM is applied to all wear sur-
faces of the router bit for longer life and reduced cost per hour. Clean-Up Router Bit
638
Scrapers
WARRANTY INFORMATION
Consult your local dealership for details of the Caterpillar Ground
Engaging Tools Warranty.
639
Scrapers
SCRAPER CUTTING EDGE CONVERSION PROCEDURE
Outline
A) Determine cutting edge dimensions.
1. Rolled Section Edges.
2. Replaceable Tip Edges.
B) Select cutting edges.
1. Rolled Section Edges.
2. Replaceable Tip Edges.
C) Determine Router Bit Bolt Hole Size and Spacing.
D) Select Router Bits.
E) Modify cutting edges if necessary.
F) Install router bit support if necessary.
G) Install cutting edges and router bits.
640
Scrapers
SCRAPER CUTTING EDGE CONVERSION PROCEDURE
Heaped Recommended
Capacity Cutting Edge Thickness
Below 11 yd3 0.75" (19 mm)
(8.4 m3) 0.88" (22 mm)
11 yd3 to 22 yd3 0.88" (22 mm)
(8.4 m3 to 16.8 m3) 1.12" (28 mm)
22 yd3 & up 1.12" (28 mm)
(16.8 m3 & up) 1.62" (40 mm)
6. Bolt Size Required — Sometimes it is necessary to drill competitive supports oversize to accept
Cat edges.
7. Number of Bolt Holes — Count only the bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing.
Step 3
Refer to the Scraper Cutting Edge Conversion Tables.
Find an edge with the same bolt hole size and spacing and total length needed ± 0.25" (7 mm).
Make sure that the edge thickness is close to what is correct for the machine.
If no edge can be found, go to Step 4.
Step 4
Find an edge with the same hole size and spacing, but longer
length. Cut the edge to size.
W NOTE: It may be possible to reduce waste by making two edges
A
B to fit competitive machines from one Caterpillar edge.
To determine if this can be done, add the total number of
F D C bolt holes on 4" (101.6 mm) or 6" (152.4 mm) spacing
L
TYPE 4 from both competitive edges.
NOTE: Bulldozer cutting edges can be used to convert scrapers.
If only one row of holes is required, consult Bulldozer
Cutting Edge Conversion Charts for dimensions.
CAUTION: Before modifying edges to fit a competitive scraper,
A verify that the edge will neither interfere with the
B
ejector, apron or elevator flights nor ex-tend into the
F D C bowl. Do this by installing the edge on the support.
L
TYPE 5
641
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
642
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
643
Scrapers
DIMENSIONS — SCRAPER CUTTING EDGES
W
A
A B
B
F D C
F D C
L L
TYPE 4 TYPE 5
644
Scrapers
ROUTER BIT CONVERSION PROCEDURE
F E DC H
I T
L
TYPE 2
F T
E D C A
B
TYPE 3
A
B W
H
F E DC
L T
TYPE 4
645
Scrapers
DIMENSIONS — ROUTER BITS
646
Scrapers
NOTES
647
Scrapers
NOTES
648
Appendix
649
Appendix
CONVERSIONS
650
Appendix
GLOSSARY
GLOSSARY Fitup
Extent to which a given part fits with a mating part.
Abrasive
Any substance used for abrading, such as grinding, pol- Footprint
ishing, blasting, etc. Material may be bonded to form Worn portion of part that contacts the working surface.
wheels, bricks and files, or applied to paper and cloth by Hardness
means of glue. Natural abrasives include emery, corun-
dum, garnet, sand, etc. Main manufactured abrasives are The ability of a metal to resist penetration.
silicon carbide and aluminum oxide. Metallic shot and Heat Resistance
grit are also used as abrasives in cleaning castings. Ability of a part to withstand higher operating tem-
Alloying Elements peratures.
Elements added to nonferrous and ferrous metals and Impact Resistance
alloys to change their characteristics and properties. Ability of a part to resist shock loads.
Alloy Steel Low Hydrogen Weld Overlay (Butter Beading)
Steel consisting of substantial amounts of one or more A prewelded overlay that eliminates the need to preheat
alloying elements added to a carbon steel to modify before welding.
the properties of the steel.
Metallurgy
ARM (Abrasion Resistant Material) Science dealing with the constituents, structure and
Application of tungsten carbide particles to a part to properties of metals and alloys, and the processes by
protect critical wear areas. which they are obtained from ore and adapted to the
Breakage use of man.
Failure of a part when subjected to a load. Penetration
Brinell Hardness Test Ability to dig into material or working surface.
Value of hardness of a metal or alloy, tested by mea- Retention
suring the diameter of an impression made by a ball of Ability of one part to maintain a proper fit with mat-
given diameter applied under a known load. Values are ing part, such as tip and adapter.
expressed in millimeters.
Rockwell Hardness Test
Carbon Steel This test measures hardness by determining the depth
Steel which owes its properties chiefly to various per- of penetration of a penetrator into the specimen under
centages of carbon without substantial amounts of certain arbitrarily fixed test conditions.
other alloying elements; also known as ordinary steel
or straight carbon or plain carbon steel. Rockwell hardness values can be converted into Knoop
and Brinell hardness numbers.
Cost Per Hour
Strength
Average amount of customer’s expense for each hour
of work. Ability of a part to withstand impact.
Cost Per Ton Tempering
Average amount of customer’s expense for each ton of Application of heat to quenched, hardened steels or to
material moved. steels in the martensitic condition. Temperatures
employed in tempering are from slightly above room
DH-2 Steel temperature to approximately 1200˚F. Tempering can
A steel alloy which thru hardens. also be accomplished by the austempering or martem-
pering methods. Tempering is also called drawing.
DH-3 Steel
A thru-hardened steel alloy that remains hard at higher
operating temperatures, providing long wear life.
651
Appendix
GLOSSARY
652
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
Special Instructions
Use these Special Instructions for reference when installing Caterpillar GET.
Product Document # Title/Description
1) 992B SMHS7246 Installation of 4V4877 Cutting Edge Assembly
2) 992G REHS0315 Procedure to Repair Cracks on Bucket
3) 994 REHS0208 Special Instruction for Converting 994 Wheel Loader Buckets to the
Mechanically Attached Adapter (MAA) System
4) 994 REHS0200 Inspection of Mechanically Attached Center Adapter (MAA) C-clamp
5) 994 REHS0067 Installation & Removal of Rock Bucket Mechanically Attached Adapter
(MAA) System and Lug Welding Procedure for 994 Wheel Loaders
6) 994 SEHS9955 Procedure for Field Installation of 994 Wheel Loader Bucket Wings
7) 994 SEHS9739 Conversion of Bucket Cutting Edge (3.0" to 4.0")
8) 5230 REHS0059 Replacing Base Edge Assembly, Adapters, Corner Adapters and Lugs on
5230 Front Shovel
9) 5230 REHS0401 Conversion of Mass Excavator to Front Shovel in the Field
10) 5130 REHS0286 Conversion of Mass Excavator to Front Shovel in the Field
11) 5130 REHS0046 Installation of Bucket Slag Pins (V680, V780)
12) 5130/5230 REHS0026 Procedure for Replacing Sidebars on Front Shovel Bowls
13) 5130/5230 REHS0213 Repair and Replacement of V780 and V1000 Adapter Noses
14) 5130/5230 REHS0463 Installation and Removal of Sidebar Protectors on
Large Hydraulic Excavators
15) 5130/5230 REHS0460 Installation and Removal of V1000, V880 and V810 Tips
16) 5230 REHS0462 Installation and Removal of V1000 Bottom Installed Coupler Pins
17) 5230 REHS0016 Installation and Removal of V1000 Tip and Coupler Heavy Duty Pins and
Retainers for the 5230 Excavator
18) 5130 SEHS9927 5130 Excavator Heavy Duty Flex Pin Assembly
19) 5130 SEHS9810 Procedure for Replacing Base Edge Assemblies, Adapters, and Corner
Adapters on Front Shovel and Mass Excavation Buckets
20) 5130 SEHS9733 Assembly Procedure for Bucket Tips, Edge Covers and Sidebar Protectors
(Installing Flex Pins)
21) All REHS0434 Procedure to Install Wear Protection on Base Edges and Adapters
22) All REHS0280 Installation & Removal of the Mechanically Attached
Wear Plate System
23) All REHS0260 Removal & Installation of the Mechanically Attached 138-0006 and
138-0007 Retainers
24) NEHS0700 Choker Style Fabric Basket to Install and Remove Bucket Teeth
25) NEHS0701 Non-Choker Style Fabric Baskets to Install and Remove Bucket or Blade
Cutting Edges
653
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
654
Reference Materials
SOURCES OF CONVERSION/REPAIR INFORMATION
Other Publications
Document # Title/Description
1) SELD0751-06 Service Warranty Bulletin (NACD)
2) PEGP9800-11 Promotion and Training Materials
3) TECB1043 Dozer Performance: Rolling vs Sliding (Product Training Bulletin)
4) AEDK0752-02 Handbook of Ripping (Twelfth Edition)
655
Appendix
SOURCES OF CONVERSION/REPAIR INFORMATION
656
Appendix
SOURCES OF CONVERSION/REPAIR INFORMATION
G
equalize clearance and reduce weld restraint.
.10 F
E K
4) Chamfer outside of remaining corner so that H bevel weld
can be deposited.
5) Preheat weld area to 400°F.
6) Tack weld.
7) Weld using dry E7018 electrode. For weld sizes, see sketch
and table below.
Adapter Corners A B C D E F G H J K
1U1254 8K6455/56 0.86 0.41 2.16 0.31 0.58 0.31 0.50 0.50 0.31 0.50
1U1304 8K6455/56 0.80 0.71 2.37 0.38 0.62 0.38 0.50 0.50 0.31 0.62
8K7525/26 0.82 1.72 2.45 0.38 0.62 0.38 0.50 0.50 0.31 0.62
1U1354/5/6 8K7525/26 1.06 1.45 3.22 0.38 0.75 0.38 0.56 0.62 0.38 0.75
7K9309/10 1.06 1.45 3.22 0.38 0.75 0.38 0.56 0.62 0.38 0.75
8E0464/5/6 7K9309/10 0.50 0.88 0.50 0.62 0.75 0.44 0.88
7J9554/5/6 8K6489/90 0.50 1.00 0.62 0.88 1.00 0.50 1.00
3G4554/5/6
NOTE: All dimensions are in inches.
Adapter Corner A B C D E
9J3662/3/4 8K6489/90 3.44 3.44 0.75 0.88 1.00
8E5464/5/6 7K9309/10 3.06 2.81 0.62 0.75 0.88
1U1350/1/2 8K7525/26 2.38 1.75 0.50 0.62 0.88
9J8929 8K6455/56 1.88 1.38 0.31 0.50 0.75
3G0169 8K6455/56 1.88 1.38 0.31 0.50 0.75
8J7525 5G2806/07 0.94 0.50 0.25 0.31 0.31
NOTE: All dimensions are in inches.
658
Reference Materials
BUCKET ADAPTER WELDING DATA
Adapter Corners A B
1U0307 8K7525 0.62 0.44
8K7526
1U0257 8K6455 0.56 0.44
8K6456
9J4207 5G2806 0.44 0.38
5G2807
NOTE: All dimensions are in inches.
Adapter Corners A B
3G2357 7K9309 1.38 0.50
7K9310
3G1357 8K7525 1.00 0.38
8K7526
3G5307 8K7525 0.88 0.31
8K7526
* Burn corner forging so that A dimension to front of forging is 1.44.
NOTE: Three-bolt adapters have been replaced by two-bolt adapters for all current
base edge systems. All dimensions are in inches.
659
Reference Materials
HARDWARE DIMENSIONS
The Ground Engaging Tools Conversion Report Form (PEEP4210-03) should be used to report all
GET conversions. Please send completed forms to:
Caterpillar Inc.
100 N. E. Adams
Peoria, IL 61629-5480 USA
Forms can be ordered on the Dealer Terminal System or on a Literature Order form.
661
Reference Materials
GET CONVERSION REPORT FORM
662
Reference Materials
COMPETITIVE CONVERSION LISTING
663
Reference Materials
COMPETITIVE CONVERSION LISTING
664
Reference Materials
COMPETITIVE CONVERSION LISTING
665
Reference Materials
COMPETITIVE CONVERSION LISTING
666
Reference Materials
COMPETITIVE CONVERSION LISTING
667
Reference Materials
COMPETITIVE CONVERSION LISTING
668
Reference Materials
COMPETITIVE CONVERSION LISTING
669
Reference Materials
COMPETITIVE CONVERSION LISTING
670
Reference Materials
COMPETITIVE CONVERSION LISTING
671
Reference Materials
COMPETITIVE CONVERSION LISTING
672
Reference Materials
COMPETITIVE CONVERSION LISTING
673
Reference Materials
COMPETITIVE CONVERSION LISTING
674
Reference Materials
COMPETITIVE CONVERSION LISTING
675
Reference Materials
COMPETITIVE CONVERSION LISTING
676
Reference Materials
COMPETITIVE COMPARISON LISTING
677
Reference Materials
COMPETITIVE CONVERSION LISTING
678
Reference Materials
COMPETITIVE CONVERSION LISTING
679
Reference Materials
COMPETITIVE CONVERSION LISTING
680
Reference Materials
COMPETITIVE CONVERSION LISTING
681
Reference Materials
COMPETITIVE CONVERSION LISTING
682
Reference Materials
COMPETITIVE CONVERSION LISTING
683
Reference Materials
COMPETITIVE CONVERSION LISTING
684
E ec ve w h sa es o he s use on o a e Ma ch 1 1996
CATERPILLAR W A R R A N T Y
Ground Engaging Tools
Ca e p a nc o any o s subs d a es Ca e p a Ca G ade B adap e s and G ade B assemb es Pa s sh pp ng cha ges n excess o hose wh ch a e
wa an s he o ow ng G ound Engag ng Too s so d by excep o ca b de e emen and bond ng ma e a usua and cus oma y
and used ou s de he geog aph c a ea spec ed unde
Th s wa an y a so cove s he pa en ma e a o he g ound Loca axes app cab e
L m a ons aga ns b eakage
engag ng oo s s ed above when Ca e p a sou ced
G v ng me y no ce o a wa an ab e a u e and p omp y
ps and adap e s Ab as on Res s an Ma e a ARM has been app ed by a
mak ng he p oduc ava ab e o epa
Ca e p a dea e
noses o 1 p ece ppe shanks
L m a ons
Th s wa an y s sub ec o he o ow ng
end b s and ou e b s Ca e p a s no espons b e o a u es esu ng om
Warran y Per od
s de cu e s and s deba p o ec o s Any use o ns a a on wh ch Ca e p a udges mp ope
The wa an y pe od s no m ed by me and s app ca
Un Too h componen s b e h oughou he use u e o he g ound engag ng oo s B eakage o g ound engag ng oo s due o wo n ma ng
cove ed componen s o hose ha have been ha d aced o mp op
Modu ok componen s
e y we ded
Ca erp ar Respons b es
MEGS M n ng Edge Gua d Sys em componen s
a b eakage occu s du ng no ma ope a on Ca e p a C acks n he ARM we d and ch pp ng o ha d pa c es
cu ng edge assemb es bo on a p a e o ha a ow w du ng no ma wo k ng hou s and a a p ace o bus ou o he we d Th s s no cons de ed b eakage unde
segmen s and cu ng edges excep h gh ca bon mo o ness o a Ca e p a dea e o o he sou ce app oved by he e ms o he wa an y
g ade cu ng edges Ca e p a
Use o non Ca e p a componen s
ppe shank p o ec o s P ov de a Ca e p a s cho ce new o Ca e p a
Abuse neg ec and o mp ope epa
app oved epa ed pa s o assemb ed componen s
sca e ps
needed o co ec he de ec A d e en wa an y s a emen app es o G ound Engag ng
compac o ee Too s used n Aus a a Cop es o app cab e wa an es may
No e ems ep aced unde h s wa an y become he p op
be ob a ned by w ng Ca e p a nc 100 N E Adams S
Land Compac o ps and choppe b ades e y o Ca e p a
Peo a L USA 61629 3345
No e An add ona wa an y app es o Long L e P us
User Respons b es
T ps
The use s espons b e o
bo on wea p a es and so e p a es
Labo nc ud ng we d ng and ha dwa e cos s assoc a ed
oade bucke cu ng edge co ne componen s w h emova and ns a a on
NE THER THE FOREGO NG EXPRESS WARRANTY NOR ANY OTHER WAR TH S WARRANTY S EXPRESSLY N L EU OF ANY OTHER WARRANT ES EX
RANTY BY CATERP LLAR EXPRESS OR MPL ED S APPL CABLE TO ANY TEM PRESS OR MPL ED NCLUD NG ANY WARRANTY OF MERCHANTAB L TY OR
CATERP LLAR SELLS WH CH S WARRANTED D RECTLY TO THE USER BY TS F TNESS FOR A PART CULAR PURPOSE REMED ES UNDER TH S WARRANTY
MANUFACTURER ARE L M TED TO THE PROV S ON OF MATER AL AND LABOR AS SPEC F ED
HERE N CATERP LLAR S NOT RESPONS BLE FOR NC DENTAL OR CONSE
QUENT AL DAMAGES
SELF5259
??e h &W @J ?
h
?@@@e??@@@@X?)L@@@@@@@@@@@@&JW?@1@@@@@@@7X?)L@@@@@@&J??)L@@&WOM?0@e@Y2&WO??MY.@O@?@Y@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@2@O2?OM0e@?
4XV)X@ 6@ 2& WW Y? 0? 4X V) X@ )@ @@ & Y? 'X V) X@ )@ @@ &7 W? ?X?)L@ @@ @ ???@1@@@@7 ?@1@@@@7J??H5@@@@??H5@@7J
e WW Y 27 W
Je
??e
e
h???@@@@@@@@@e e??@@@@????1L@@@@@@@@7J???eL@1@@@7J?e
e1?@@7W?M0e@@2@O@e2OM?0?@M20O2?WM?0M2.WO??MY.@O@Y@@@@@@@@@@@@@@@&@O2?OM?0M@0@@@@@@@@ @3 e? ?Y ,( @@ @@ @' @V 3X ?-e 5( @@ @' @V 'X V- ?W YY (0 @@@?N@ e Y? 0?@L?@@@7? @L?@@@@????@@@@@7??@@@@??
eh f
7Ye
??e h
h??@@@@@@e e
e??@@@@??e eL1@@@@J7e ?M?(@@W@?@?@M@(S@?@e2OM?0?@M20O@?2?OM0e@M20O2?OM?0M20O2?WMY..WOYY.@O@?@@@&&WWYY(0@@@@@@@@@@@@@@&& WWY(+ @V 'X V) X@ )@ @@ &7 W? Y+e V1 X@ )@ @@ @@ && W? ?5 1@ @@ @@@37? ?Y (( @@ @@@?N&?WYH(@ @??@@7J????@@@@J?H5@@7J??
??e h??@@@@@@e ?@@?e?@@?M0@2OM?0@e@?@U2@O@?@e@2?OM0e@M20O@e2OM?0?@M20O2?OM?0M20O2?WYY..WW??YH.&WWYY.(T@)@@@@@@@@@@@&&WWYY (@ @@ 'V X- WY (@ 'V X6e 2W? ?L @@ &W ?L @@ @3 ?5 @@ ?@? @? @@ ?@ @
?e eh h?@@@e e??@@@@@@@@@@@@@@@@@@@@W@e @@@WfM0@@@2O??M0@2OeM02OeM.W?M.WY.W?U@@@@&WY(( @@@@@@ @@ @@ @3 7? ?? ?Y ,( @@ @@ @@ @' @V &?YY (0 @4 @R @@ T@ )J?Y5( @? ?@ @@ @@&7W??@@@@@ @eeH 5@7??@@7J?H@@@7
???e eh??@@@@@@e e?@@@@@@@@@@@@@@@@@@@@WfM0@2O??M0@2OeM02WY02WY.W?Y.OY@2WY(@@@ @@ @& W? ?X )@ @@ &W ?( @@ @@ eH @@ ?1 @
)J? ?? @@ @? H@ JH @? 5@ J
eh h?@@@e??@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@W@@e@M@0W@e2OM?0?@M20O@?2?OM?0M2.WO??MY..WW??YY..WWYY..WO??YY((@@@@@@ @@@@@@ && WW YY (0 @4 @V 'X V) X@ -& WW Y? 0? @L ?@ 1@ @@ &7 We e5 @@@@ @N 3Xe H@@??@@@@@ 7??5@@7??5@7J?H@@@7??
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@e K6@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@2@O@e @2O eM0@2O?M02W?M.WY.W?Y.O?K6@ K@&&W WY (@ @@ @* ?? Y( @@ NXe -WY (? @@ @@ ?Y (@ ?@ @J H@ JH @? 5@ J?
@@@@@@@@@@@@@@@ e
e???@@@@@@?@?e
@h @@@@@@@?4KI6g K6@@@@2Oe?M0@?@M@0@@@@@W@@e@M@0:2?OM?0M20O2?WMY..WW??YY..WW?f g ?Y 5( @@ @@ @@ @@ && WW Y? +? V, L@ @@ @@ @3 7 eY 5( @@ @? N1X@)@ O@ ?? ?5 @@@@@??@&7W? ?5@@7??5@7J?H@@@7
??? @@@@@@e
???@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@2@@O@@f h ?M04I?@?@K@6@@@@?@@K@@6@@@@@@@@2@@O@@?@2?@OM@e ?@@@@W@?@M@0W2?WM?0M2.WW?h h? ?1 X@ 6@ 2@ O2 ?0WM@Y (@( @@@@@3 @@? N31 Xe @
-& WMWY((e @ @3 @?e YY (( @? ?@ e ?
YH (@7J?H57J?H5@&JW?
@?Y @@@@@@ @@@
@@@
7Je e
h?@M@0@@@@@@@@M@@0@@@@@@@@@@@@@@@@@@@@4@@I@@e @@K@06@@@@@@@@@@@@@@@@@2@@O@@?@@MC0?@@4IehY , )@O@ ?? ?5@@ @@ @? ? @ H5&& WWYH.7W?H5@7J
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?@@?@@@@@@@@@@@@@@?@@@@@@?4@e I@h X@ 6@ &7W???Y
@@@@@@4I@g
2@WM&?0??@f M@0@4@I?@?@@e
M0@@@@@@@&eh
@K@@6@ @2@@O@ 2?7 WM? ?@@ L?@ @@@@@@
@@@@@Te ?f
K6@K@6@2@O@?@e 2O@e @4I??K@O@e ?Y@Y(@(@???@@@@@@7@@f ..WWYY ..WWYY((&7W??
'@VI@g ?4f
I?e@@@@@@@@@@????@@@@@@@@??1L@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@e e?h @@@@@@@@@@@@@@@@@@@@@2@O@?@?@M?@e Ie@?@K@6@@@@@@@2@O@?2MW(Y@0@4@I4h Ig ? ?Y ,0 @@ @@ @? N1 X@ )@ O@ ?? ?5 @@@?@@Jf? YY.. WW?Y5(&&WW?
@@@@@@@@4@I@?@@@@@@@@@@@N3??@@@@@@@@????@@@@@@@@@?@h @@@@@@2OM?0e M0@@@@@@4Ie@?@K?6g @@@2OeM0@@@@@@4I?K@O?@M@0@@@@@@@@ ?X) Y(?@@@?@ ?
@@@@@@ && W? ?f g X@ )X@ @-3 7W?e &7 W? ??ee YY..WW??YH(@ 7J?
@@@@@@@@@2@O@?@@@@@@@@@@@@??@@@@@@@@????@@@@@@@@??f ?@@@@@@@K@@6@@@@@@@@@@@@@@@@@@@@@@@@@@2@@O@@e @@??M04I?@?@K@6@@@@K@@6@@@@@@@@2@@O@2?@OM@?0?M@@e
@I@e f
Y(Y(@(@@@@@???@@@@@77J??f
@4KI6?@?@K@@@O2)?W@MY@(0@@@@@@@@4@@I@@e @??f f &&WW?
&W? e ?
YY..?
WW??(
YY((W
@&@O2?Oe???H5@W@@@@@@@@@@??@@@@@@@@????@@@@@@@@?????@1@@@@@@4@@I@@?@@f @@@@4@I@?@@e@g ?K6@2O@?@M@0@@@@?@@M@@0@@@@@@@@@@@@@@@@@4@@I@@e @@?g Y04V?@@@@@@@@@@@@@@@@@2@O@??M+e VX6@@@@&O@ ?? M@?eX?)X@6@@?g YY.. WW?YY (&& W ?
Wf?H@7??@@@@@@@@@@?N1L@@@@@@????1L@@@@@@???@L?@@@@@@@?@e@2?OMf M0@@4Ie?K6@@?@K@6@2@O@?2?OMe M(@@'I?K6@@@2?OY?0M@0@@@@ 'I ?? K6e 2WY 0@ @N e ' h g ?YY..WW??YY((&&WW?
@@@4@I4e ?(JH@@@@@3?@@7?@?@@@?@?@@@?@@@?@K@06@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@2@4O@I?@e ? e?(@@@@@ @@ @@@@ && W? ? e? ?5 @@ @@ @@ @V '? ?f ? Y . W ? Y ( &
e
@@??Me
04?I@?@e
@@0K@@6@@@@@@@@@@@@@@@@@2@4O@I?@f @23 7W? ?h
@@@@@2@@O2@e W@@@@???@5@?W?@@@@@@@@@@@@@@@???@@@@@@?J?5H@@@@???@@@@@@J7?H?5@@@???@@1@@@7@J??H@@@??Ng 2O??@e 2O??@M@0@@?@@M@@0@@4@@I@@?@4?@IK@?6@K@?@@e O@?2@MW@(Y@@0@@@@@4@@I@4?@IK@?6@e 0@4@V*e ??Y,. YW .? WY?( Y&(W &?WW?
?@@@@@??@MK?06e @@M@0@@@@@@@@@@@@@@@@@@@@@@@@@@@24@OI@??@??@MK?06e eY,6
2W e
e?
X/
S?? ?,) @?V
V'f I??H@@?R@7??@@@@@@@@@@??@@@@??@@@@??@@@@??@@@@N3L?@@??5@@@3@??@@f ?@@@@@@4@I@?@e @4KI6?@e ?K62O?eM0@@@4@I@?4KI6?@?@K@6@2@O@?2?OM?0M@@@I@?4KV)X@6@@@2@O2?OM?0e 4VXh XV /VX ?X' )'? V
@@@@4@?@(@T?@@J?H5@W@@@@@@@@N3e @@??Me ?@@@@K@6@@@@@@@@@@@@@2@O@f ? e ? ) @ @ @ @ @@ @' V? e? @@ @@ 3? @ &
W? ?f g ?X/ V?X)'V?
@@2W@?@?@?@@@@@ e eH@5@@@@@@N@3e e
eH@5@@@@@@@@@?e ?@@?H?@@@@@@@@@???@@@???@@@@@@@@@@@@@@@@@@@@@@2@@O@@e
@@@@?2@MO@0e @@@@0@4@I@?4e IeK)@@&O?M0@@@?4XI6?@K@6@@@ @@ &@O@ ?' ?? M0e 4? V1 X@ 6@ @@ @7 J?e &h ?XX//VV??XX))''VV?
&?Oe?H57J?H@7??@@??@@@@@@@@@@??H5@@@@@@@@N3??@@@@@@@@N3??5@@@@@@@N3??H5@@@@@@@@??f @@@@@@@@@@@@@@@@@@@@@@@@@@@@@?g X 6 2 W ? @ @ @ @ @ @ @ @ 4 I ? K &W Y 0@@@@'I? @?eY?(Y@0@@??@@Nf X V ? X ) ' V
@@K??f e ?/ ?
f f
XX //VV??XX))'' VV
@&'@WI@@?7J@?H?@75??J5@HJ?7H5?@W@@@@@@@@@@7J@?e ?L1@@@@@@@@J7??@@@@@@@@7@??1@@@@@@@J7??L1@@@@@@7@??1@@@@@@@4@@I@4?@IK@6e ?K6K@6@2@O@?@?2MO0e ?M0@4I@?@K@6@@@@@@@@@2@O@?@??M@e @I4(?V@KX@)6@@@@@@@@2@@O@@e ,@@@@@??@@@3N??f X/ V ? X
e1@@@@@7@?J@??L@@@@@@??@@??@@@@@@?J@??L1@@@@@g @@@@@@@???g @@K@6@@@@@@@@@@@@@@@@@@@@24@OI@??@YK?(@eIO?@eK@6M@@0@@@@@@@@ @@@@'V? ?f g Y?@ (Y@+3V?XX)X )@?@@3?'V??e XX ?)X')V 3??
?
//VV
J?H5@7??5@J?H57J?H@7??@@@@@@??@@?N1@L@@@@@@7@Je eL@@JH@?@@7?@?1@@?@NL@@?@@@@@M@0@@@@@4@I@e @4I??K@OfM(@@4I?K)@@@@@2@O'g ??Y,( @@@@7Je Y(I)???@@@@@@??@@3@?Ne f X/?VL?@1N'V?
??@@J?H57J?H@7??5@J?H5@W@@7J?H@@3@??@@@7??@@@@??@@@@??5@@@?N1L@@J?H5@@N3L?@@7J?H@@3@??@@@@??@@@@@&@?@6@@@@@@@@@@@@@@@2@O@?@??Me @@@?@K@6@@@@@@@@@@4@V'Xe 62h Oh ?/XV/XV/XV)X')V'V?
Y&7W?H@7??5@J?H57J?H@7??@@??5@@@@@?N&?W?H5@@@@?N@?@??H@@@@3@??@@??@@@@@@??@@??5@@@@@?N@e @?@@?e?K62O??@@e@M@0@@@@@@@@@@I@@e 4I??K)X@6@2&WOe?h M0?@4X@I64?@VK@?@?H?5@@@@@@@@@@@?e ?1X@X)@)@???@@@@@@3@@f?f 'V ?X /
hY ,0 @@ @@ @@ @@ @@ @@ LV'X V/XV/XV)L3@?N
J?5JH7?@?5JH7?@@@3??@@@3??5@@@?@?@@@?@?@@@3e?H@@@@3@g e@@@4I??K6@@@@@@@@@@@@e
3?e ?e
B? h @?@X@R @@(@@I
@@?@???X@
1)@@@@@???@@@@3
@3?
Ne
Y?.HW7H?75?J5HJ7H?7@??@5?J5H@@@@@@@@??5H@@@@@@@@??5H@@@@@@@@3N??5H@@@@@@3N??5H@@@@@@@@3N??@5@@@@@@3N??@@@@@@@@@@@@@4@I@e?@@@@V@?@K@6V4?VK?6K4/VV?h ?5
? Y@ 0@ 4@ IX4?6VK@X )@) @@@@@7 @@? J75 Y@ '' VKVX))e @@ @7 e X) ?@ @@ e? X1L)'@
3VN
?LL
133
N??
L11
@3'
NV?
@J?5JH7?5JH7?@@@@7?1@@@@?1@@@@7?1@@@7?1@@@@7J??@1@@@@@@7J??1L@@@@@@@f @ @ @ @ ; ? K 6 4 I ? K / V ? X / V ?g ?X 3
V
1) @@ @@ @@ @@ '' VV X? -? W) H@ @@ @@ @7 3 eX 1) @@ @? J5Y@(@ I@ ?? ?1 @@@@@??@'3V? ?1@@3??1@3N?L@@@
@@Y?.HW7H?75?J5HJ7??@5?J5HW@@@@@@@?J@??L@@@@@@J7???L@@@@@@@@?J@??L@@@@@@?J@??L@@@@@@@@e L@@@?@?@@@?@@4IK?6K46I4?VK?6K4/VVXX//VV??XX//VIf ?M0@ M@+' VX )@ @@ @& ?? X) @@ JYe 'VX )? @@ @@ ?X )@ ?@ @N L@ NL @? 1@ N?
@@J?5JH7?H7?@?@@7?@?@@@?@?1@@7?@?@@@?@?1@@7?@?@@@?@?1@@?@?K64V?K/V?X/VX/V?X)@@@@ @ @ ' V X ) @ @ & W Y ' V X 6 @ ? 5 @ ' V e @ @ @ 7 Ye L @ ? @ @ 3 ? @ 3 ? @ N L @ 3 ?
?
@@@@Y?.HW7H?75?JH?75?J5HJ7H?@@@@?J5H@@N?L1@@J7H?@@3N?L@@@@?J5H@@N?L1@@J7H?@@N??L@@@@?J5H@@N?L1@@J7H?@@3N?L@@@@N?L13N???eKX/6I4?VXX//VV??XX//VIXX/@I4?VXX))@@@@ @@@@@@ @@ '' VV X? 6? 2Y W( Y@ (@ @@ '' VV ?? ?) H@ @@ @@ @@ 3e eL 1@@@ @? J5 (N
@ ??@??@@@@@ @??L1@@N?L1@3??1@@@N
@@@@@@@@@Y@J.JYWY.Y.W.WYW?.Y5W.JHW?7H5?7J5?H:@@e @@@@@@@@@@3?N?@?@?H?@@5@@@@@@N3?e @@?@@3?@?5@3?@@?@@@@@3??@@??@5@@@@@?@??913N?X1/NVf @@
) @@@@ @@ @@ @7 3? ?? ?X ,) @@ @@ @@ @& @W *?XX )6 @2 @T @@ R@ (N?X1) @? ?@ @@ @@'3V??@@@@@ @eeL 1@3??@@3N?L@@@3
?YH(@@@@@@?N@??H@@@@@@N'?Ve ?H@@@N?H@@@@@NL3?L3??e f ?KX/L/V'VXVX/X/V)R?@(U@@@@@@@@@@@@@@'@'V'VXVX)X )@ @@ &W Y' VX )@ &W Y0e 4V? ?H @@ 'V ?H @@ @7 ?1 @@ ?@? @? @@ ?@ @
@@@@@@@@@YJ.?WY?.HW7Y?.HW7H?75?W@@@@@@@@J@??L@@@@@@@@@??15@@@@@@@@73??15@@@@@@@@73??@5@@@@@@J@??L@@@@@@@@@?X13N?X1/NV?X1/NVf ??@?@@@'@V'XV)X@6@@@@@@@@@@@@'@@ V
'3X
V)Xe @
-? &
W( W
Y@ Y
(@ (
@@ @
@@ '
@7 V
3? X
?-e e WY 5@ ( @ @ ' V ? 5 @ @ @ 3
7? ) @ @ @ J ? X ) @ ? @ N ? ? @ @ ? 1 @ N ?
?
1 @@ @@ @& @W *? ?X 1) @@ @@@J ?e XX )6 @@@??@'3V?L@ @??@@@3????@@@@3N?L@@@3?
@@@@@@@@@@@?&MW.YW.YW.?WH?75?J5HW@@@@@7@??@@??@@@@@@J7?eXL)@@@@7@?J@??L1@@@@@J&?W??L1@@@@@@??@@??1@@@@@X@3N?L13N??XX//VVXX/)I@?@@@@@@@@@@@'@I4?IK?6K@6@@@@@@@@ 7 ? X ) @ @ & W Y + V X ) @ & W Y ' V X 6 @ ? @ 4 V ? ? H @ @ H @ @ ? ? @ @ @ ? @ @ ?
2YW(Ye 0@ Ne N
@
4' VV X? 6? 2Y W( Y@ (@ @@ '' VV X? -Y W( Y@ (@ @@ '3 V? ?Y?(H@ @@ @@ 3N ???@5@@@@3 ?@
?
5@@@@3N??L1@@@@??L1@@3
@@@@@@@@@@@&&@WW&YYW(.YSW.??WYY?..YWW.YYW..HWW7?H?5@@C@@??JH5H@@@@N?3L1?@@@J7?H?5@@@@@@N?3L1?@@@?J?5H@@@@3N@?L?@@@J7?H?5@@@@@@N?3L1?@@@J7???H@@@N?3?Le@@@@=N?3X1?/NXVX/X/V/VXV?/?XVX/?/VUVX'X)V)@X@@)@@@@@@@@@@@@@@@@@@@@@@4@@I@4?@IK@6@e@??
@@@JY(@'R.WY.W?H7 e5@@@N?H@@@@??H@@@N e@@@@N?Y(@@N??1N?X/VX/R(@'VL@@@@@@@@@2O e? ?,X@)@ @@ @@ &* W? ?? ?, X@ )@ @@ @@ @@ &* W? ?, X@ )@ @@ @@ @@ 7? ?(X@)@ @@ @@ @@ J??@@@@@@@7? ?@@@@@@@7?e H@@@@?e H@@@7
@@@@7J?H5@@@@@@@@@JYY..WW??YY..WW?e e 4 V 62 W Y 0 4 V X ) & W Y ' V X ) @ & W ? ? L @ 7 ? ? 1 @ @ ?1 @ @ J ? 5 @ @ ? 5 @ J
e X@ ?@
Je
?
@7?5@@@@@@J?Y.Wf
e1@@@@@@@@7@@?@J@???@L@@@@@@@@@7@@??????L51@@@@@@@@@J37e e1@@@@@@@@@@@?@J@???,L1@@@@@@@@@'@7V3?e eX?/XXV//?VVX??/XLV/@LV@@@@@@@@@@@@@3@3?N?1L1@@@@@@@@@@@&@@W@&Y&W(OY@?0@M@@0@@@@@
@73Xe ?,
?
Y@ (@ @@ @@ '3 V? -e W5 Y@ (@ @@ '' VV X? -Y W( Y@ 0@@N @e 2Y W0 ?@??L@@7@?
@?
L@@@@????@@@@7@??@@@@?
@7J?H5@@@@@@@@@@@&7W?YY(.Jg W?fL@@JH@?1@@JY(?@@@?'VL@@7?@NL@@&W?f & W Y + V X ) @ @ @ 7 ? +e 1 @ @ @ @ & ? 5 @ @ @ 3 ? Y ( @ @ ? & W H @ ? @ 7 ? ? @ @ J H @
@7J??
JH@@@@@&WY(@?g??@&7W?H5@@@N3L?@@7J?H5@@@?N1L@@7J?H@@3@?N1L@@J?H5@@3@?N1X@)Jh
fX?/L@V''?VV1XX@))@@@@@@@@@@@@@@@N3NL?L@1@@@J@7HJ?@Y5@(@@@@@@@@@@&@@W@&Y W(Y@(@ @@ '' VV XX )- @W &Y W( Y@ VV
'
XX )6 @2 @W &? W? ?L 1@ @@ @&@W7? ?L (@ @@ @@@3N??5Y@(@ @??@@?J@???@@@@??@5@
?5@@@@&WY(@@Nh5Y@(@@@@@@N??@H?@5@@@@@3N??@H?@5@@@@@3N??@H?@@@@@@@'3V??g g?H@@'VX)@@@@3?@e?@5@@@@@@&@W&YW(Y@ (@@@@@ @@ @@ @7 3? ?? ?, Y@ (@ @@ @@ @@ '& V?e Y@
( 0@ 4@ R@) @?J5Y@ (? ?@ @@ @&@W7??@@@@@ @ee5 H7@??@@J7H?@@7@
??1@@@@@&@W&YW(Y@(@@@@@@@3Nh ?g1@@@@@?)@@@@@?@@@@@*?@@@@@7?gH?@5@@@@@@@''VVXX))@@@@@7@??e 1 @ @ & W Y ( @ @@ @@ @& W? ?X )@ @@ &W ?( Y@ @@ @Te H@ @? 1@ J? ?@ @@ ?H@ JH @? 5@ J
V'XV6?2?WYY((@@@@@@@@@@@@&*W??g Jh ?gX))@@@@@@@@@@@@''VVX6e2YW(Y@+'VVX?6?2YW(Y@(@@@@@ @@@@@& @W &Y W( Y@ 0@ 4' VV XX )- @W &Y W0 ?@ ?? L1 @@ @& @W 7e e@ 5@@@ @3 NXe )H?@@??@@@@7 @??@57@??@5J7H?@@7@??
g?L?L@1@@@&@@W@7HJ?@?'3XV?)L@@@&@@W@7HJ?@?@NL?X@1)@@@@@?&J5WY@?(NL?X@1)@@@@@J@7f
NX @J ?
g
e15@@@@@@73????X,)@@@@@@@@ @&@W&Y W( Y@ (@ @@ @@ @& @W *? ?? ?, Y@ (@ @@ @3
e
-Y W( Y@ (? ?1@@@@ @@ @? ?5 Y@(@@??@@7@? J5H@@?J5H7@??@57
@@&73W??Y??'X,V)@X@@)@@@@@@@@&&@WW&YYW((Y@@0@@4@3V7f h &W5Y@(@@@@N??&?W5Y@(@@@'3VXe)H?@@@@@'3V?Xg )?f???15Y@@0@@4@'V'VXVX)X)@)@@@@@@@@&@@W&@YW*+e V X ) @ & W Y ' V X ) @ @ &W Y( @@ @@ &W Y+ VL @@ @7 e 5@ @N X) O? ?@ @@ ?& W? @7 ?@ JH @J
W?Y5(@@@'@V'XV6e2W?Y5(@@@@@@@@7J?Y5+@V3??f @@@@3??@@@@@e51@@@@@@@@??f Y+VL@@@@'VX62?WYY((@@@'@V3X?-eWY5(@@@'@V'XV6e2W Y(@@@@&WY(@3?1@ -& @@@3 eY(?@@@ e? H@JH7?57?
?1@@@@&e?1@@@&WH@@@Nf f@1@@@@@&7W????1L@@@@@@7Je eX)@@7?f e?H5@@@3@?N1X@)@@@@@@37e e?,@@@@7?e1@@@@&e??51@@@@@@@&&WWYY((@@@@@@@N3Xe WMWY((e
@?Y@@@@@@@@??Y5(@@@??@@@@7Je eY5(&7W?H57J?H5@@J?
V'XV)X@6@2&WWYY(+@V'XV)X@-&WWYY((@@@@@@@37f L@@@@J?Y50@@@?N1L@@7J?H@@4@V3L?@@@@Jf ?e?5@@@'VX)-@W&YW(Y@+'VVXX)6@2@W&YW(Y@+'VVXX)6@2@W&YW(Y@+' VX ) @ & W Y ( @ @ @ @ @ 7 ? @ @ @ @ @ T ) Y O??@@@?& @W7??Y?.HW&Y W.YW.?WH?@@J7
@'VeY(@@@'V??(@@@@@Jf Y+V??e ?H@@@3?@?5@@@NfY+?V1L@@@@@@@@'@V*Xe Y(@@@'V??Y(@@@'VeY(@@@V'XV-?W?Y((@@@@@@@@@@&&WWY?(L?@@@@@@@@e ?Y((@??@@@@@@?f .W Y. W? Y( 7?
@&@&W@WY*e e,@@@@@&??X6@@2@W7H?@5@@@''VVe ?@K@6@2@W7e e?16@2@O@?@e eY?(Y@(@@@3N?X16@2@O@?2MW+e ,@@@@@*??,@@@@@*eX,)@@@@@@@&@W&Y?(?IX?6K@6@2@W&YW(Y@(@@N?X1)@O@?@??@5@@@@??@@@@J7f fY?.YW.?WY?(Y&(W&W?
04XV)X@)@@@&&WWYY((@I@?4KV6e ?@@@@@*??e g Y+V??Xg ,@@@@@e?Y0@@'VVXX))@@@&@W&YW0?4?VXX))@@@&@W&YW0e 4 V X ) @ &W Y ( @ @ 4 V e ? ( @ @ @ 3 e Y ( ? @ @ @ ? @ 7 ? e ? Y . W?Y(&W?
W?Y((@@@@@'@V3Xf -W?5@@@@@@@@&&W?H@@I@?@?4KV6e 2W?e?)X@)??51@@37??@&&Wf X62OeM@?,@@@@3?X-W?Y5(@@@@@'@V&X?-e WY(@@'VX-W?5@@@@@@@@&&W?H@@I@?@?4KV6e @?Y(@?@@7?&W??e YW.?WY?Y& (&W
2?W(Y@(@@@@@@@@J'Y?(YY@(+@@V@'?3V?f X-W?ee f &WW?
e
?YY('@V'?V??Y,0@@@@@@@N'XV)X@6@?2@YO@0??@Me 'V?1)@@@&@W&YW(Y@+'V(VX@X)@)@@@@@&@3W7f ?Y(I?K62?W(Y@(@@@@@@@@J'Y?(YY@((@@@@@@@@???@&@@W7J??f
e ? Y
YYW
.
..?
WY?(Y((W
'VVXX))@X@@-&@WW7?Y?5(Y@@(@@I@4?@VK&6e eh h??5@@@@@@@'@V'L?@@@@?@@U@@@@V@'?@e e?,@@@@@@@'@7V3?X?e X-WY(@@@'VX-W?1Y5@(@@@@@@@&4@WV&Ye f Y @ @ @ @ ? ( @ @ @ @ @g YW.? WY?(Y&(W&&W ?
@@@@&'&WVf 1@@@@2&WWYY(f 0@@@YS@@@@?(@@@@@f
f
?YY..
2WY(Y@0@4@I@US@e ?(@@@@@@@@@J'Y?(Y@0@@@@@@@@2@W&??e ?Y.YT+/VV?f e?@K@6@@@@@@@@@@4'VV?L,@@@@@@4@@V@'X'V)e X6?@U@@S@M@0@4?'V(VX@X)@6@@@@@2@@W&&YWf (Y@0@4@I@US@e @2?W(Y@(0@@@@@@@@@@@SJ'Y?(Y@0@@@@@@@@2@W&??e ?Y. W? WY?( Y&(W&?W ?
?V??5@@@@@@@@&@O'?f ?K6@@?(@@@@2O?fY.W?X?/XV/?VfK6@@@@'?@@2?OYf ?(@@@@@3f?5@@@@@'f?K6@@?(@@@@2O?fY.W?Y(&W
'I?K62WY0@M@0@@@@@4'V?Y0@@@@@@&fY?.YW.?WYe +V?X/V?e?)@@@@@@4V?,@0@@@@@4@I4?VKX)6@2@O@?@M?(Y@''VI??@K@6@2@W&YO0?@M@0@@@@@4'V?Y0@@@@@@&f?YY..WW??YY((&&WW?
Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2 O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@ @2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?( @@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6 @@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I? K6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y( I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7? Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@7?Y(I?eK6@@?(@@@@@2O?e?Y.W?Y(&?)'V?X/VfK6@@@@@'?@@2O?eM'V?1@@@@@@@7@?f (@?@K@6@@@@@?J(Y@(@@@@@@@@2@O@f 2WeY?.YW.?WY?(Y&(?@)''VV??XX//VVe ?X?6K@6@@@@@@@@@@''V?L@@@@2@O@e @@?'M?'e V??1@@@@@@@@@@2@7W@?Yf Y(I e (@?@K@6@@@@@?J(Y@(@@@@@@@@2@O@f 2WeY?.YW.?WY?(Y&(W&W?
@e 2W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@ @&f?YY..WW??YY((&&WW??eX)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?Y.YW.?WY?Y((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?Y.YW.?WY?(Y&(W&?W?X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?Y.YW.?WY?(Y&(W&?We ?XX))''VV?X?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?Y.YW.?WY?(Y&(W&?We ?XX))''VV??XX//VV?
?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe
6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@ @@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4 V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?(Y@0@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?(Y@0@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@O2?W?Y5(@@@@@@@@@4@V'??Y0@@@@@&f?YY..WW??YY((&&WW??e X)X')V'?VX?/XV/?Vf?)@@@@@4V?Y(0@@@@@@@@@'@V3Xe 6@K@@@2WYY((@I@e
Oe5@@@@@@@@4'V?Y0@@@@@&?fY?.YW.?WY?(Y&(W&e
W??XX))''VV??XX/?/Ve
e?@@@@@&O?M(@@@@@2WfY.W? Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@ @@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@ &O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&W ?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I ?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@ @@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)' V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@ @@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@ 2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/ V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@g?@@@@@&O?M(@@@@@2WfY.W?Y(&Wf?X)'V?X/V?e?X6@@@@@'I?K)@@@@@ V?f)@@@@@4V??(Y@0@@@@@@@@@'3V?X?6K@@@O@e 5@(@@@@@@@@@4'V?Y0@@@@@&?f? YY .. WW ?? YY (( && WW?
@4I??K62W?@@@@@@2Of?Y.W ?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@ @@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K 62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(& W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@? X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@ @@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX) 'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62O M0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@ 2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X /Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@@4I??K62W?@@@@@@2Of?Y.W?Y(&W?gX)'V?X/Vf?K6@@@@@@?X62OeM0@@?@e @@@K@6@2&WO??@M@(@@@@@@@@2@O2?Wf ?e?YY..WW??YY((&&WWg ?fX?)X')V'?VX?/XV/f
V?f
X6@K@6@@@@@@'@I@?@K?)X@6@2@O@?@??Mg
0@@@4I@e
@@K@6@2&WO??@M@(@@@@@@@@2@O2?Wf ?e?YY..WW??YY((&&WW?
@@@@@@@2&W?Yf0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @ @@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @@@@h @@@&?eM?.YW.Y?Y..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @@@@h h
@@@&?eM?.YW.Y?.YW.?WY?(Y&(W&?We h ?XX))'V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@ @@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @@@@h @@@&?eM?.YW.Y?.YW.W??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@@@@@2@W&Y?0f @@@@h h
@@@&?eM?.YW.Y?.YW.?WY?(Y&(W&?Weh ?XX))''VV?X?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@ @@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4V)X@6@@@@@@@@@@@@@@@2&W?Yf 0@@@h @@@@&?e?MY..W?YY..WW??YY((&&WW?h
eh ?X)X')V'?VX?/XV/?V/XV/I?e)@@@@@@@4VX)6@@@@@@@@@@@4@I@e & f
2O?e 6@K@6@@@@@@@@@@'@I@?@?g
K6@2OeM@(@@@@@@@@@@@@2O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@'@I@?@?g K6@2OeM@(@@@@@@@@@@@@2@O?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?W ?XX))''VI??XX//VVXX))4'VI?eX6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6 @@@@@@@@@@@@@'@I@?g?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@'@I@?@?g K6@2O @M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@'@I@?@?gK6@2OeM@(@@@@@@@@@@@@2@O2?W??MY(0&&WWY.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?I?XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@'@I@?@?g K6@2OeM@(@@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?IXe 6@@@@@@@@@@@@'@I@?@?g K6@2OeM@(@@@@@@@@@@@@2@O2?W??MY(0&&WWYY..WW??MY((&W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2OeM@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?X)X')V'?IX?/XV/XV)X4)V'?Ie X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@@'@I@?g ?K6@2Oe@M@(@@@@@@@@@@2@O@?2?WM?(Y&0W&YW.YW.?WM?(Y&(W&?Wfh?XX))''VI??XX//VVXX))4'VI?e X6@@@@@@@@@@@@'@I@??K6@@2@O@?2?WMY(0@@@@@@@@@@@@@@2&We ?M.YW.Y?.YW.?WY?(Y&(W&e W?h h?XX))''VV??XX//VV?X//VI?e ?)@h @@@@@@@@@@@4'V?IX)6e @@@@@@@@@@@@@@@2@W&Y0@@@@@@@&e?M.YW.Y?.YW.?WY?(Y&(W&W?
6@2O??M@(@@@@@@@@ W? Y W Y .
@e 4I?@h
@M@(@@@@@@@@@@2@MO@0?2@?W@M?2(YW&0YW&.YWW.YYW.0?W@M?2(YW&(W&?Wfh?X)?X'X)V6'?@IX4?/VXVX/X/V)VX4X)V6'?@IX@e
4I?hM0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2 W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4?I@?@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2 W ?X6@4VX/VX6@@4IK?6h M0@@@4I??@h M0@@2WY.WY0@2W ?X6@4VX/VX6@@4KI6?@h M0@@?e@@@@@@@@2?OMe M?(Y&0W&YW.YW.?WM?(Y&(W&W?fhX?)X')XV'6?I@X?4/XVV/XXV/)XV4)XV'6?I@X?@6?4@KI@6h @@@@@@@@??MKg @@ @@2@ O2e (0 && WW ?? YY (( && WW?
0@@@4I@h
M2 W. YW .?
@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO? ?KX))''VVXX/6I4?IKe 6@K@6@@4I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'VXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/I6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@2@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@??2MO0?2MW.YWY((&&WO?
?K)X')V'XV/XI6?4KI6e @@K@64@I@e
4I@?@K@6@@@@@@@@@@@@@@@@@@@2@O@??M?0M@0@@2@O@?2?OM?0M2.WWYY((&&WO?
?KX))''VVXX/6I4?IKe6@K@6@@4@I4e
I?@K@6@@@@@@@@@@@@@@@@@@@2@O@?@M?0?@M@02@O@?@?2MO0?2MW.YW(Y&(W&?O
?K)X')V'XV/XI6?4IK6e@K@6@@4@I4eI?@K@6@@@@@@@@@@@@@@4@I@h M0@@@02@MO@0?22MWW.YYW.(YW&(YW&0O@?2W? M0?@M@0@@2@M O?WMYW .? WY ?YY((&&WW?
2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@2Of@@2OeM0@2O?M(&W ?X)'I?K6@4I??K6@@?e?K6@@2@O@?@e 2@O@??@@Me
@02@O@?2?OMe 0@2O?M(&W? ?KX))'X'V)VX'X/I6I?4?KIK6?6@?@4K@I6@e@4@IK4?6I?@?@@K@f 6@@@@@@@K@@6@@@@@2@@O@@?@@e 2@O@??@@Me
@02@O@?2?OMe 0@20O2e M((&&WW?
Mh 0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I?M0@@@@@@@?@M20O@e @2MO0?@M20O@?2W? X6@K46I@?4KI6?@?@K46I@@@@@@@@4I??h M@02@O@?2?OM?0M@02@O2W ?X?6K@64@I4?IKe 6@@4I? M20O@?@?2MO0?@M@02@O@?2W?
685
COMPETITIVE CONVERSION LISTING
2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@2O ?K6@@2@O@?@2O? K6@@@K@6@@@2@O@?@2O?
Reference Materials
NOTES
686
© 2000 Caterpillar
Printed in U.S.A. PECP3001-05