Professional Documents
Culture Documents
GENERAL PRODUCTS
Table of Contents
..........................................................................................................................Page 10
......................................................................................................................Page 12
..............................................................................................................................Page 29
Hercules stuffing boxes are recognized for superior quality and design unsurpassed in the industry. Hercules
originated cone-style packing and it quickly became the industry standard. Now with the advent of DOME packing, Hercules has introduced a
new concept destined to become an even greater standard. Both cone and DOME packing provide a tight seal without the excessive tightening
required for compression-type packing. Certain Hercules stuffing boxes have a unique misaligning feature that reduces the need for exact
alignment with the pumping unit. The newer inverted cone and DOME style packing automatically compensate for flow line pressures.
Today, Hercules continues to set standards for quality and dependability in the oil field with new packing designs, materials and the
most extensive line of stuffing box models. No wonder production personnel think of Hercules first.
Patented Designs.
NACE Options.
SB
Working Pressure
Original design.
Superior & dependable
performance.
Lub Upper Gland with grease zerk.
Optional Oil Reservoir Gland
(ORG) and Anti-Pollution
Adapter (APA).
Unique misaligning feature
reduces need for exact
alignment with the pumping unit.
SPECIFICATIONS
SBT
DPSB
1500 PSI
1500 PSI
1500 PSI
Bottom Thread
(API Tubing or LP)
2", 2-1/2",
3", 4"
2", 2-1/2",
3"
2", 2-1/2",
3", 4"
Bottom Connection
Male
Female
Male
Weight
2"
2-1/2"
3"
4"
Height
24 lbs.
25 lbs.
26 lbs.
29 lbs.
33 lbs.
37 lbs.
42 lbs.
N/A
50 lbs.
51 lbs.
52 lbs.
56 lbs.
13-1/2"
16"
17"
Material
Split Cone Packing
Rod Sizes
Pieces Required:
Top Cones
Bottom Cones
Lower
gland bolts
Split cone
packing rings
Body
Compression
bolt packing
nut
Ductile Iron*
4
1
Lower gland
Compression
bolt packing
ring
6
1
Flange bolts
Compression
bolt
Compression
ring
Split cone
packing rings
O-ring
Base
Hercules inverted cone stuffing boxes feature unique inverted cone packing that is pressure activated by well fluids,
providing a superior seal without excessive tightening. The packing is very easy to adjust and results in a
more uniform and longer lasting seal.
Patented
Patented
SPECIFICATIONS
IVSB
IVSBT
IVDPSB
Working Pressure
1500 PSI
1500 PSI
1500 PSI
Bottom Thread
(API Tubing or LP)
2", 2-1/2",
3", 4"
2", 2-1/2",
3"
2", 2-1/2",
3", 4"
Bottom Connection
Male
Female
Male
19 lbs.
20 lbs.
21 lbs.
24 lbs.
28 lbs.
32 lbs.
38 lbs.
N/A
45 lbs.
46 lbs.
47 lbs.
51 lbs.
10"
12"
14"
Weight
2"
2-1/2"
3"
4"
Height
Material
Split Cone Packing
Rod Sizes
Pieces Required:
Top Cones
Bottom Cones
Ductile Iron*
1", 1-1/8", 1-1/4", 1-5/16",
1-3/8", 1-7/16", 1-1/2", 1-3/4"
3
1
3
1
5
1
Patented
Double-Packed Inverted
Stuffing Box (IVDPSB)
Exceptionally rugged, built for performance
under tough conditions.
Primary packing can be changed under
pressure by tightening compression bolts.
Lower profile than Classic model.
Optional Oil Reservoir Gland (IV-ORG) and
Anti-Pollution Adapter (APA).
Top
Follower
Polished
Rod
Top
Follower
Polished
Rod
Cap
Cap
Cone
Packing
Cone
Packing
Body
Body
Packing
Alignment
Ring
Packing
Alignment
Ring
Patented
Patented
Big Stuff
SPECIFICATIONS
BIG STUFF
Working Pressure
1500 PSI
1500 PSI
NOTE: 1500 PSI cap is not interchangeable with 2500 PSI models
Bottom Thread
(API Tubing or LP)
Bottom Connection
Male
Male
20 lbs.
21 lbs.
21 lbs.
27 lbs.
45 lbs.
45 lbs.
46 lbs.
49 lbs.
9-3/4"
15"
Weight
2"
2-1/2"
3"
4"
Height
Body & Cap Material
Ductile Iron*
Pieces Required:
Top Cones
Bottom Cones
3
1
5
1
All Hercules High Performance Stuffing Boxes are available with either
Cone or DOME packing. See pages 12-14.
Patented
Patented
SPECIFICATIONS
BIG STUFF
Working Pressure
2500 PSI
2500 PSI
NOTE: 2500 PSI cap is not interchangeable with 1500 PSI models
Bottom Thread
(API Tubing or LP)
Bottom Connection
Male
Male
23 lbs.
24 lbs.
24 lbs.
30 lbs.
48 lbs.
48 lbs.
49 lbs.
52 lbs.
9-3/4"
15"
Weight
2"
2-1/2"
3"
4"
Height
Body & Cap Material
Ductile Iron*
Pieces Required:
Top Cones
Bottom Cones
3
1
5
1
All Hercules High Performance Stuffing Boxes are available with either
Cone or DOME packing. See pages 12-14.
PCSB
SPECIFICATIONS
PCSB
Working Pressure
1500 PSI
Bottom Thread
(API Tubing or LP)
Bottom Connection
Male or Flanged
Weight
2"
2-1/2"
3"
Height
Material
Base & Adapter Spool
Flapper
Body & Packing Glands
Split Cone Packing
Rod Sizes
Pieces Required:
Top Cones
Bottom Cones
Chevron Packing Rings:
Packing O.D.
Stack Height
Compression
Bolt
Compression
Ring
102 lbs.
107 lbs.
112 lbs.
Split Cone
Packing
24-1/2"
Pollution Control
Adapter Spool
Flapper
Wear Pad
Packing
Support
Chevron
Packing
Packing
Support
Upper Packing
Gland Body
NPT Port
Upper Gland
Bolts
Flapper Valve
Lower Gland
Base
Lower Gland
Bolts
Hex Bolts W/Lock Washers
HTD
Cap
HTD Upper Split Bushing
Primary Packing
HTD Lower Split Bushing
Upper Body
SPECIFICATIONS
HTD
Working Pressure
3000 PSI
Bottom Thread
(API Tubing or LP)
Bottom Connection
Male
Weight
2"
2-1/2"
3"
4"
Lock Nut
HTD Upper Split Bushing
Height
Packing
Material
Body & Base
Cap
Rod Sizes
O-Ring
Base
31 lbs.
32 lbs.
33 lbs.
35 lbs.
14"
Alloy Steel*
Ductile Iron*
1", 1-1/8", 1-1/4", 1-5/16",
1-3/8", 1-7/16", 1-1/2", 1-3/4"
Packing O.D.
Stack Height
2-1/4"
2-1/2"
Packing Type
Max. Temp.
Chevron NBR
Chevron HSN
Chevron FKM
Kevlar/PTFE
250 F/121 C
325 F/163 C
400 F/204 C
540 F/282 C
10
Upper Glands
Cap
Packing Support
(MDS Nylon)
Chevron NBR
Packing
Packing Support
(MDS Nylon)
Body
Bolts With Nuts
& Washers
APA Port
Standard top
wiper cone
Felt wicks
Wick housing (steel)
Patented
O-ring
11
Pollution Control
Pumping Units
With Gas Engines
NO Contact
NO Contact
(Not Used)
(To Magneto)
Common
Common
NC Contact
NC Contact
(Not Used)
IMPORTANT NOTE: The potential for the presence of flammable materials in the atmosphere may create a hazardous location as
defined by the national electrical code (NFPA-70). Hazardous (classified) locations require the use of explosion proof equipment suitable
for the hazardous class, division and group.
NOTE: On the explosion-proof switch, the red wire is the NC contact, blue is the NO contact, black is common and green is ground.
12
DOME Packing
DOME Packing
Material
Max % H2S
Max CO2
Max. Temperature
NBR
2%
Not Recommended
250 F (121 C)
10%
20%
325 F (163 C)
TFEP (Aflas )
35%
15%
450 F (232 C)
Ultra-Flex 152
10%
35%
325 F (163 C)
HSN
0.1%
2,000 PPM
0.2%
10,000 PPM
1.0%
20,000 PPM
2.0%
50,000 PPM
5.0%
100,000 PPM
10.0%
150,000 PPM
15.0%
200,000 PPM
20.0%
350,000 PPM
35.0%
13
DOME Packing
Nitrile Gasket
DOME Packing
SELECTION CRITERIA FOR RUBBER COMPOUNDS IN R&M ENERGY SYSTEMS STUFFING BOXES AND BOPS
Rubber Compound
Name
Soft , Hard ,
Special Lubricated,
Heavy Duty,
PTFE Filled
Maximum Service
Temperature with
Concentrations of
H2S & CO2
Below 1%
Maximum Service
Temperature with
Concentrations of
H2S & CO2
at Maximum
Tolerance Levels
Maximum
Tolerances
for H2S
Maximum
Tolerances
for CO2
Resistance to
Explosive
Decompression
in CO2
Concentrations
up to 20%
Performance in
Steam
Environments
Mechanical,
Tear and
Abrasive
Resistance
ASTM
Type
SBR
110
43
110
43
2%
NR
Poor
Poor
Good
Compound C
Compound D
Compound G
Compound H
Compound S
Compound ST
Nitrile
NBR
300
149
250
121
2%
25%
Good
Good
Excellent
XNBR
EPDM
SBR
250
450
160
121
232
71
150
350
160
65
177
71
5%
5%
2%
20%
NR
2%
Good
Poor
Poor
Fair
Good
Poor
Excellent
Fair
Good
NBR
250
121
150
65
2%
5%
Fair
Poor
Good
HSN
HNBR
325
163
300
149
10%
20%
Good to
Excellent
Very
Good
Excellent
Ultra-Flex 152
HNBR
325
163
300
149
10%
35%
400
450
204
232
325
350
163
177
20%
35%
5%
15%
Very
Good
Fair
Excellent
Excellent
FKM
TFEP
Good to
Excellent
Poor
Fair
Viton
Aflas
Poor
Fair
NR - Not Recommended
SBR - Styrene Butadiene Rubber NBR - Nitrile Rubber XNBR - Carboxilated Nitrile Rubber
HSN - Highly Saturated Nitrile or Hydrogenated Nitrile EPDM - Ethylene Propylene
Aflas is a registered trademark of Aashi Glass Co. Ltd.
Viton is a registered trademark of E.I. DuPont Co.
R&M Energy Systems
P.O. Box 2871
Borger, Texas, U.S.A. 79008-2871
(800) 858-4158
(806) 274-5293 Fax: (806) 274-3418
14
The most important feature of stuffing box packing is long-lasting performance. R&M Energy Systems continually tests new and
better materials to meet the demands for ever-changing well conditions. Extensive field tests make certain new packing
stands up to stringent durability and performance standards. Cone packing is available in sizes for all polished rods
1" through 1-3/4" in sets of 4 (3 top cone and 1 bottom cone) and 5 (4 top cone and 1 bottom cone).
Soft Cone Packing
For sweet crudes with high oil-to-water
ratios and low sand content.
Hard Cone Packing
For sweet crudes with low oil-to-water ratios.
Slick Pack (Compound S)
For reducing polished rod noise
(squeaking) in noise-sensitive locations
on crudes with high oil-to-water ratios
and low sand content.
Special Lubricated
For sweet crudes and wells without
constant flow.
Heavy-Duty
For prolonged service on sweet crudes
and wells without constant flow.
Compound H
For steam injection wells.
Compound G*
For H2S and CO2 wells.
PTFE Filled
For sweet crudes and wells with long
stroke and fast pumping cycles.
CONE PACKING
Material
Max % H2S
Max. Temperature
Chevron Packing
Rod sizes: 1", 1-1/8", 1-1/4", 1-5/16", 1-3/8",
1-7/16", 1-1/2", 1-3/4"
Soft
2%
110 F (43 C)
Hard
2%
110 F (43 C)
Compound S
2%
160 F (71 C)
Special Lubricated
2%
110 F (43 C)
Heavy Duty
2%
110 F (43 C)
2%
110 F (43 C)
Compound ST
2%
160 F (71 C)
Compound C
2%
300 F (149 C)
Compound D
2%
300 F (149 C)
Compound H
Compound G*
5%
PTFE Filled
5%
IMPORTANT NOTE: The guidelines on this page are for general reference purposes only and
should not be used as the sole determining factor for packing material selection.
Each downhole condition is different and must be addressed on a case-by-case basis
to determine the best material solution for your particular well.
OTHER PACKING
Material
Product
Chevron NBR
2%
250 F (121 C)
350 F (177 C)
Chevron HSN
10%
325 F (163 C)
250 F (120 C)
Chevron FKM
20%
400 F (204 C)
Kevlar/PTFE
HTD
20%
540 F (282 C)
Max
% H2S
Max
Temperature
HERCULES
15
3000 PSI WP
Bottom Thread
(Tubing or LP)
Top Thread
(Tubing or LP)
Major Side
Outlet (LP)
Height
Weight
CT-7
CT-13
CT-8
CT-17
CT-1
CT-18
CT-11
CT-14
CT-9
CT-19
CT-12
CT-10
CT-16
CT-2
CT-20
CT-21
CT-22
CT-23
CT-3
CT-25
CT-4
CT-24
CT-6
FST
FST
DST-31
2"
2" Male
2"
2"
2"
2-1/2"
2-1/2"
2-1/2" Male
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2" Male
2-1/2"
3"
3"
3"
3"
3"
3" Male
4"
4"
4"
2"
2-1/2"
1-1/2" EUE & 2"
NUE or EUE
2"
2"
2-1/2"
3"
3"
2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3"
4"
4"
2"
2-1/2"
2" NUE or EUE
2"
2"
2"
2"
3"
2"
2"
2"-2-1/2"
2-1/2"
3"
2"
2-1/2"
2"
3"
2"
2-1/2"
3"
2"
3"
2"-3"
3"
3"
4"
2"
2"
2"
6"
7-1/4"
7-1/4"
8"
8"
7-1/4"
7-1/4"
8"
7-1/4"
8"
8"
8"
8"
8"
8"
8"
8"
8"
8"
9-1/2"
7-3/4"
7-3/4"
7-3/4"
7"
8-1/2"
6"
9 lbs.
7 lbs.
13 lbs.
21 lbs.
18 lbs.
13 lbs.
13 lbs.
10 lbs.
12 lbs.
20 lbs.
20 lbs.
20 lbs.
10 lbs.
18 lbs.
20 lbs.
20 lbs.
20 lbs.
20 lbs.
18 lbs.
19 lbs.
22 lbs.
21 lbs.
18 lbs.
14 lbs.
20 lbs.
6 lbs.
2500 PSI WP
Bottom Thread
(Tubing or LP)
Top Thread
(Tubing or LP)
Side Outlet
(LP)
Height
Weight
YT
2"
2"
2"
5-3/4"
8 lbs.
YT
2-1/2"
2-1/2"
2"
6"
9 lbs.
Note: Pumping Tee Test Pressure > 1.5 X Working Pressure (Male Threads) and
2 X Working Pressure (Female Threads)
* Corrosion-resistant coatings available, contact customer service.
R&M Energy Systems
P.O. Box 2871
Borger, Texas, U.S.A. 79008-2871
(800) 858-4158
(806) 274-5293 Fax: (806) 274-3418
16
Body
Body
Packing Ring
Packing Gland
Packing Gland
Packing Ring
Tapered Cap
Wing Cap
O-Ring
Ram Screw
150 H Ram
Ram Screw
200P Ram
150H
200P
Quick opening.
Acme cap thread eliminates cross-threading.
Cap with internal threads protected from the environment.
Blow-out proof ram screw.
Full opening.
Reinforced ram block reduces extrusion.
Cap o-ring provides reliable, pressure-tight seal.
SPECIFICATIONS
Sizes Available
Vertical Bore
Working Pressure
Body & Cap Material
150H
200P
2"
2-1/2"
3" LP
2"
2-1/2"
3"
1.975"
2.560"
2.970"
2.120"
2.440"
3.000"
1500 PSI
2000 PSI
Ductile Iron*
Ram Material
See Page 17
Carbon Steel**
Alloy Steel
Connection
N/A
Height
9-1/2"
10"
Weight
43 lbs.
52 lbs.
20"
26"
Optional
Optional
*
Corrosion resistant materials & coatings available, contact customer service.
** NACE stainless steel optional.
*** Other flange sizes available.
17
SPECIFICATIONS
ITBOP
Sizes:
Top Flange
3-1/8" 3000 PSI API
Bottom Flange
3-1/8" 2000 & 3000 or 7-1/16" 2000 & 3000
Side Outlets
2" LP x 2" LP or 2" LP x 3" LP
Vertical Bore
2.990"
Body Material
Steel
Cap Material
Ductile Iron, Carbon Steel
Ram Material
See Chart Below
Ram Screw
Alloy Steel
Packing Gland
Carbon Steel
Ram Sizes
Blind, 5/8"-1", 1-1/8", 1-1/4", 1-1/2", 1-3/4"
NOTE: 150H & 200P RAMS ARE NOT INTERCHANGEABLE
Packing Material
NBR, HSN, FKM
Height
13-3/4"
Weight
183 lbs.
Width (Rams Open)
26"
Handles
Optional
Compound C
HSN
FKM
250 F
(121 C)
300 F
(149 C)
325 F
(163 C)
400 F
(204 C)
Max. H2S
2%
2%
10%
20%
Max. CO2
NR
10%
20%
5%
Max.
Temperature
HERCULES
18
2" Back
Pressure Regulator
4-Way Cross
HERCULES
19
FL
OW
FL
OW
Sand Trim Kit for 2" Back Pressure Regulator consists of:
Carbide tipped plunger and carbide seat which replaces
ball & seat and lower spring keeper.
Available in 200, 500 and 900 PSI (2" Model Only).
Less vibration.
Smoother flow.
More abrasion resistance.
Greater control sensitivity.
.875"
.875"
.875"
.683"
1.125"
1.125"
1.125"
1.000"
Monel
302 SS
Carbon Steel
Carbon Steel*
HERCULES
Chokes
SPECIFICATIONS
B-29
Size
2" x 2" LP
Working Pressure
2000 PSI
3/4"
Height
Weight
Open
17-5/8"
Closed
16-3/8"
20 lbs.
B-29
20
Rod Boss
Figure 1
Figure 2
Figure 3
Figure Clamps
SPECIFICATIONS
Figure 1
Figure 2
Figure 3
Rod Boss
Rated Load
13,000 lbs.
26,000 lbs.
40,000 lbs.
40,000 lbs.
25,000 lbs.
32,000 lbs.
64,000 lbs.
76,000 lbs.
55,000 lbs.
35,000 lbs.
1-1/8", 1-1/4",
1-1/2"
1-1/8", 1-1/4",
1-1/2"
250 ft-lbs.
250 ft-lbs.
250 ft-lbs.
550 ft-lbs.
250 ft-lbs.
Weight
3.75 lbs.
7.5 lbs.
11.25 lbs.
25 lbs.
10.5 lbs.
Height
2-1/2"
5"
7-1/2"
6-3/4"
4-1/8"
Rotating Diameter
5-3/4"
5-3/4"
5-3/4"
9"
9"
Forged Steel
Forged Steel
Forged Steel
Forged Steel
Forged Steel
Body Material
HERCULES
21
Indention style clamps have greater clamping capacity at any given bolt torque.
Polished rod indentions are 27 times less than design limits in API Specification 11B.
Polished rod endurance strengths are greater with indention clamps.
CLAMPING CAPACITY
Contact
Indention Style
Friction Style
Indention Style
(Figure Clamps & Rod Boss Jr. )
M
I
C
R
O
I
N
C
H
E
S
Contact
*
BOLT TORQUE (FT-LBS.)
* Recommended Torque
1 Microinch = 0.000010 = 10-6 inches
Friction Style
(Rod Boss Clamp)
STRESS (KSI)
Indention Style
Friction Style
1,000s CYCLES
HERCULES
22
Rod Rotators
Rod rotation is the most effective means of removing paraffin from inside the tubing and distributing
wear evenly. This process also protects against severe rod and tubing wear when used in conjunction
with rod guides. Hercules rod rotators are available in maximum recommended loads ranging from
13,000-40,000 pounds.
T-164
T-302
A no-slip conversion kit for
T-252 and T-302SG models is available.
Contact Customer Service for details.
Specify model of rod clamp when ordering.
SPECIFICATIONS
T-252
T-164
T-252
106
120
240
240
13,000 lbs.
33,000 lbs.
40,000 lbs.
40,000 lbs.
4"
6"
7"
7"
Shipping Weight
18 lbs.
35 lbs.
47 lbs.
47 lbs.
Height
4-1/4"
5-1/2"
6-1/2"
6-1/2"
Rotation Type
Helical Gear
Ratchet Table
Helical Gear
Helical Gear
Body Material
Ductile Iron
Ductile Iron
Ductile Iron
Ductile Iron
*Actuator Cable
16'
16'
25'
25'
28
24
77
154
T-302
T-302SG
23
Leveling Plate
Minimizes polished rod breaks.
Compensates for carrier bar misalignment up to 2 degrees.
Installed under rod rotator, or under polished rod clamp if
rotators are not used.
Available for all polished rod sizes.
Ensures uniform engagement between polished rod clamp
& carrier bar.
PILOT
Front View
Top View
24
Single Completion
Dual Completion
1-1/8"
1-1/8"
1-1/4"
1-1/2"
Liner O.D.
1-5/16"
1-3/8"
1-1/2"
1-3/4"
HERCULES Valves
25
Flow
Magnum Catalog
HERCULES Valves
26
MATERIALS OF CONSTRUCTION
Part
1. Body
2. Sealant Screw
3. Check Valve
Cast Iron-Standard
PTFE
ASTM-A126 Class B
17-7 PH Stainless
ASTM-A126
PTFE
ASTM-A395
Inconel
Carbon Steel
4. Gasket
5. Plug
6. Spring
7. Base Plate
Reseal
Base
101
Silicone
-40 to 450
103
Synthetic Oil
-20 to 400
104
Castor Oil
0 to 450
104WG
Castor Oil
-20 to 400
RESEAL SEALANTS
Choose a sealant that best matches your
service conditions. As pressure and/or
temperature increases, more frequent
sealant maintenance may be required.
Reseal 101 - Best sealant for extremely
low temperatures. Requires more
frequent sealant injections to maintain a
seal at gas pressures above 250 PSI.
Reseal 103 - Standard in all Hercules
valves. Best all around sealant. Can cause
excessive torque on larger valves at
temperatures below 0 F.
Reseal 104 - Best sealant at high
pressure, but more prone to oxidation
than 103. Heavy oxidation requires more
frequent sealant injection and also causes
higher torque on larger valves at
temperatures below 10 F.
Reseal 104WG - Same as 104 except
thinner consistency for use in
environments below 10 F.
Wellhead Water
Gas
Model
Number
*
**
End
Connection*
Material
6"
H-142
Threaded
Cast Iron
200
200
200
200
N/A
H-142D**
Threaded
Ductile Iron
N/A
1200
1200
1000
N/A
H-143
Flanged
Cast Iron
200
200
200
200
N/A
H-143D**
Flanged
Ductile Iron
N/A
200
200
200
N/A
R-1430
Grooved
Cast Iron
N/A
200
200
200
N/A
R-1431
Flanged
Cast Iron
N/A
N/A
N/A
N/A
200
HERCULES Valves
27
H-142D
H-142
Size
K*
1"
2"
5-3/4"
3"
4"
2-5/8" 3-1/2"
6"
5"
4"
9"
2"
5-3/4"
3"
4"
Wt.
9"
2-7/8" 3-3/8"
6"
K*
Wt.
H-143D
H-143
1" 5-1/2" 4-1/4" 7/16" 3-1/8" 3-3/8" 1-7/8" 2-1/2" 5-3/8" 15/16" 1-1/8" 6 lbs.
2"
7"
6"
5/8"
4-3/4"
3"
8"
7-1/2"
3/4"
6"
4"
9"
9"
2"
7"
6"
5/8"
3"
8"
7-1/2"
3/4"
4"
9"
9"
4"
2-5/8" 3-1/2"
5-3/8" 3-1/4"
5"
6"
5-1/4"
3-1/4"
5"
6-"
Grooved End
R-1430
Size
K*
2"
8"
5/8"
4"
2-5/8"
3-1/2"
6"
15/16"
1-1/8"
2.250/
2.235"
5/8"
2-3/8"
3"
9-1/2"
5/8"
5-3/8"
3-1/4"
5"
8-1/4"
1-1/4"
1-3/8"
3.344/
3.326"
5/8"
3-1/2"
4"
10-3/4"
5/8"
6-3/4"
4-1/4"
6-1/4"
10-1/2"
1-3/4"
1-7/8"
4.334/
4.314"
3/8"
4-1/2"
R-1431
Flanged End
Size
K*
6"
10-1/2"
11"
1"
9-1/2"
5-1/8"
8"
7-1/2"
11-1/4"
1-3/4"
N
1-7/8"
Wrenches
Wrenches and locking devices for virtually
any requirement. Contact Customer Service
for details.
HERCULES
28
Slimhole O.D.
WORKING PRESSURE
Inches
Millimeters*
Inches
Millimeters
Inches
Millimeters
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-3/4"
13
16
19
22
25
29
32
35
38
45
N/A
1-1/4"
1-1/2"
1-5/8"
2"
N/A
31.75
38.10
41.28
50.80
N/A
1-1/2"
1-5/8"
1-13/16"
2-3/16"
2-3/8"
N/A
38.10
41.28
46.04
55.56
60.33
PSI
kPa
1500
10,340
2000
13,800
2500
17,250
3000
20,700
C = 5/9 ( F-32)
4000
27,600
6000
41,400
TEMPERATURE CONVERSION
API TUBING
External Upset
Nominal
Size
O.D.
In
I.D.
MM
In
MM
Non-Upset
Lbs.
Kgs.
Per Ft. Per Meter
Threads
Per Inch
O.D.
I.D.
In
MM
In
MM
Lbs.
Per Ft.
Kgs.
Per Meter
Threads
Per Inch
3/4"
1.050
26.7
.824
20.9
1.2
1.8
10rd
1.050
26.7
.824
20.9
1.1
1.7
10rd
1"
1.315
33.4
1.049
26.6
1.8
2.7
10rd
1.315
33.4
1.049
26.6
1.7
2.5
10rd
1-1/4"
1.660
42.2
1.380
35.0
2.4
3.6
10rd
1.660
42.2
1.380
35.0
2.3
3.4
10rd
1-1/2"
1.900
48.3
1.610
40.9
2.9
4.3
10rd
1.900
48.3
1.610
40.9
2.8
4.1
10rd
2"
2-3/8
60.3
1.995
50.7
4.7
7.0
8rd
2-3/8
60.3
1.995
50.7
4.6
6.8
10rd
2-1/2"
2-7/8
73.0
2.441
62.0
6.5
9.7
8rd
2-7/8
73.0
2.441
62.0
6.4
9.5
10rd
3"
3-1/2"
3-1/2
88.9
2.992
76.0
9.3
13.8
8rd
3-1/2
88.9
2.992
76.0
9.2
13.7
10rd
4"
4.000
101.6
3.476
88.3
11.0
16.4
8rd
4.000
101.6
3.548
90.1
9.5
14.1
8rd
4-1/2"
4.500
114.3
3.958
100.5
12.8
19.0
8rd
4.500
114.3
3.958
100.5
12.6
18.8
8rd
O.D.
In
1.050
1.315
1.660
1.900
2-3/8
2-7/8
3-1/2
4.000
4.500
I.D.
MM
26.7
33.4
42.2
48.3
60.3
73.0
88.9
101.6
114.3
In
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
MM
20.9
26.6
35.0
40.9
52.5
62.7
77.9
90.1
102.3
Lbs.
Kgs.
Threads
Per Ft.
1.1
1.7
2.3
2.8
3.8
5.9
7.7
9.4
11.0
Per Meter
1.7
2.5
3.4
4.1
5.6
8.8
11.5
13.8
16.4
Per Inch
14V
11-1/2V
11-1/2V
11-1/2V
11-1/2V
8V
8V
8V
8V
NUE = Non-Upset
3" tubing is not specified (N/S) by API, but 3" & 3-1/2" are frequently used
interchangeably when referring to 3-1/2" API tubing.
HERCULES
29
114.3
5-1/2"
139.7
6-5/8"
168.3
7"
177.8
7-5/8"
193.7
8-5/8"
219.1
9-5/8"
244.5
10-3/4"
273.1
Notes:
Lbs. Per
Ft.
Kgs. Per
Meter
I.D.
In
MM
9.50
11.60
13.50
15.10
13.00
14.00
15.50
17.00
20.00
23.00
17.00
20.00
24.00
28.00
32.00
14.1
17.3
20.1
22.5
19.3
20.8
23.1
25.3
29.8
34.2
25.3
29.8
35.7
41.7
47.6
4.090
4.000
3.920
3.826
5.044
5.012
4.950
4.892
4.778
4.670
6.135
6.049
5.921
5.791
5.675
103.9
101.6
99.6
97.2
128.1
127.3
125.7
124.3
121.4
118.6
155.8
153.6
150.4
147.1
144.1
17.00
20.00
23.00
26.00
29.00
32.00
35.00
38.00
25.3
29.8
34.2
38.7
43.2
47.6
52.1
56.6
6.538
6.456
6.366
6.276
6.184
6.094
6.004
5.920
166.1
164.0
161.7
159.4
157.1
154.8
152.5
150.4
20.00
24.00
26.40
29.70
33.70
39.00
24.00
28.00
32.00
36.00
40.00
44.00
49.00
29.30
32.30
36.00
40.00
43.50
47.00
53.50
32.75
40.50
45.50
51.00
55.50
60.70
65.70
29.8
35.7
39.3
44.2
50.2
58.0
35.7
41.7
47.6
53.6
59.5
65.5
72.9
43.6
48.1
53.6
59.5
64.7
69.9
79.6
48.7
60.3
67.7
75.9
82.6
90.3
97.8
7.125
7.025
6.969
6.875
6.765
6.625
8.097
8.017
7.921
7.825
7.725
7.625
7.511
9.063
9.001
8.921
8.835
8.755
8.681
8.535
10.192
10.050
9.950
9.850
9.760
9.660
9.560
181.0
178.4
177.0
174.6
171.8
168.3
205.7
203.6
201.2
198.8
196.2
193.7
190.8
230.2
228.6
226.6
224.4
222.4
220.5
216.8
258.9
255.3
252.7
250.2
247.9
245.4
242.8
Short
Coupling Length
In
MM
Long
Coupling Length
In
MM
5.000
127.0
6-1/4
158.8
177.8
6.050
153.7
6-3/4
171.5
203.2
7.390
187.7
7-1/4
184.2
8-3/4
222.3
7.656
194.5
7-1/4
184.2
228.6
8.500
215.9
7-1/2
190.5
9-1/4
235.0
9.625
244.5
7-3/4
196.9
10
254.0
10.625
269.9
7-3/4
196.9
10-1/2
266.7
11.750
298.5
203.2
N/A
N/A
30
Hercules
Polished Rod Clamp
Moyno Ultra-Drive
Hercules Stuffing Box
Yale
Unions
Hercules
Back Pressure
Regulator
Integral
Hercules Blow-Out
Preventor Tee (ITBOP)
Hercules
Ball Valve
Yale Unions
Hercules
Ball Valve
Hercules
Pigging
Tee
RODEC
Ultimate Tubing
Rotator Spool
Hercules
Choke
Magnum
Needle Valve
Yale
Unions
Hercules
Tubing Head
Hercules
Plug Valve
New Era
Rod Guides
Hercules
Pumping
Flow Tee
Hercules
Ball Valve
Hercules
Casing
Head
Moyno
Rotor & Stator
Pumping Elements
31
Hercules
Polished Rod Clamp
Hercules
Rod Rotators
Hercules
Rod Liners
Hercules
Rod
Lubricators
Hercules
Anti-Pollution
Adapter (APA)
Hercules
Stuffing Box
Hercules
Back Pressure
Regulator
Magnum
Needle Valve
Hercules
BOP
Yale
Unions
Hercules
Cross Tees
Hercules
Tubing Head
Hercules
Ball Valve
Hercules
Belled Nipples/
Couplings
Hercules
Plug Valve
RODEC
Adapter
Flange Rotator
Hercules
Pigging
Tee
Hercules
Choke
Yale
Unions
Hercules
Casing Heads
Hercules
Ball Valve
New Era
Rod Guides
& Scrapers
32
RODEC Tubing Rotators from R&M Energy Systems are ideal for both beam and progressing cavity down-hole pumps.
Their slow rotation evenly distributes wear around the entire internal circumference of the production tubing. Numerous patented designs
are available to match specific well conditions. They bolt to any API flanged connection and remain in place during well servicing.
Available drive options include electrical, mechanical or manual. Create a complete solution by adding
New Era Rod Guides available from R&M Energy Systems as well.
33
34
SENTRY Closures
Latest, most technologically advanced solution
for pipeline and vessel closures.
Non-threaded, internal door closure.
Greater security due to heavier, more rugged
locking components that retain pressure in both
shear and compression modes.
Greater safety as all locking components
remain fully engaged until vessel depressurization is complete.
Quicker, easier operation that requires little
effort from a single operator to close the largest
closure with minimal time.
All pressure-retaining components are manufactured from ASME SA designated materials.
Innovative pressure energized seal provides
extended service life and reduced maintenance
expense.
Simple profile of the sealing surface allows for
easy inspection and cleaning.
35
Printed in U.S.A.
704