Professional Documents
Culture Documents
Web Site
ARGENTINA
0800-333-3733
www.samsung.com/ar
BRAZIL
0800-124-421
4004-0000
www.samsung.com.br
CHILE
800-SAMSUNG(726-7864)
www.samsung.com/cl
COLOMBIA
01-8000112112
www.samsung.com.co
COSTA RICA
0-800-507-7267
www.samsung.com/latin
ECUADOR
1-800-10-7267
www.samsung.com/latin
EL SALVADOR
800-6225
www.samsung.com/latin
GUATEMALA
1-800-299-0013
www.samsung.com/latin
HONDURAS
800-7919267
www.samsung.com/latin
JAMAICA
1-800-234-7267
www.samsung.com/latin
PANAMA
800-7267
www.samsung.com/latin
PUERTO RICO
1-800-682-3180
www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
www.samsung.com/latin
NICARAGUA
00-1800-5077267
www.samsung.com/latin
MEXICO
01-800-SAMSUNG(726-7864)
www.samsung.com/mx
1-800-SAMSUNG(726-7864)
www.samsung.com/latin
VENEZUELA
0-800-100-5303
www.samsung.com/latin
LCD TV
user manual
IMPORTADO POR:
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
www.samsung.com/register
Model
Serial No.
BN68-01975N-00
Book_350_BN68-01975N_00L02.indb 1
2009-04-07 3:35:33
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the brightness and contrast when displaying still images.
Book_350_BN68-01975N_00L02.indb 1
2009-04-07 3:35:33
English
Contents
General Information
Sound Control
List of Features......................................................................2
Accessories...........................................................................2
Viewing the Control Panel.....................................................3
Viewing the Connection Panel...............................................4
Remote Control.....................................................................5
Installing Batteries in the Remote Control.............................5
Setup
Configuring the Setup Menu................................................21
Viewing Picture-in-Picture...................................................23
Input
Connections
Connecting VHF and UHF Antennas.....................................6
Connecting Cable TV............................................................6
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via HDMI...........................................7
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via DVI..............................................8
Connecting a DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) via Component cables......................8
Connecting a VCR.................................................................9
Connecting a Camcorder....................................................10
Connecting a PC.................................................................11
Appendix
Troubleshooting...................................................................24
Installing the Stand..............................................................25
Disconnecting the Stand.....................................................25
Wall Mount Kit Specifications (VESA).................................26
Using the Anti-Theft Kensington Lock.................................26
Securing the Installation Space...........................................27
Securing the TV to the Wall.................................................27
Specifications......................................................................28
Operation
Viewing the menus..............................................................12
Plug & Play Feature............................................................13
Channel Control
Configuring the Channel Menu............................................14
Managing Channels............................................................15
Picture Control
Configuring the Picture Menu..............................................16
Using Your TV as a Computer (PC) Display........................18
Setting up the TV with your PC...........................................19
License
TruSurround HD, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Symbol
N
Note
One-Touch Button
TOOL Button
English -
Book_350_BN68-01975N_00L02.indb 1
2009-04-07 3:35:33
General Information
N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
List of Features
Accessories
Power Cord
Cleaning Cloth
Owners Instructions
(M4 X L16)
Stand Screw X 2
N Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
N The items color and shape may vary depending on the model.
English -
Book_350_BN68-01975N_00L02.indb 2
2009-04-07 3:35:34
4 5
1 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
2 SOURCEE: Toggles between all the available input sources. In the on-screen menu, use this button as you use the
ENTERE button on the remote control.
3 y: Press to increase or decrease the volume. In the on-screen menu, use the y buttons as you would use the
and buttons on the remote control.
4 P (POWER): Press to turn the TV on and off.
5 POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.
6 z: Press to change channels. In the on-screen menu, use the z buttons as you would use the and
buttons on the remote control.
7 MENU: Press to see an on-screen menu of your TVs features.
8 SPEAKERS
English -
Book_350_BN68-01975N_00L02.indb 3
2009-04-07 3:35:34
4
5
N The product colour and shape may vary depending on the model.
1 SERVICE
Connector for service only.
2 HDMI/PC IN [HDMI(DVI)]
Connects to the HDMI jack of a device with an HDMI output.
N No additional Audio connection is needed for an HDMI to HDMI connection.
N What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and
video signals using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High
Bandwidth Digital Copy Protection) coding feature installed.
N Use the HDMI/PC IN [HDMI(DVI)] jack for DVI connection to an external device. Use a DVI to HDMI cable or DVIHDMI adapter (DVI to HDMI) for video connection and the HDMI/PC IN [AUDIO] jacks for audio. When using an
HDMI / DVI cable connection, you must use the HDMI/PC IN [HDMI(DVI)] jack.
3 ANT IN
Connects to an antenna or cable TV system.
4 POWER INPUT
Connects the supplied power cord.
5 KENSINGTON LOCK
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
N The location of the Kensington Lock may be different depending on its model.
6 COMPONENT IN / AV IN
Connects Component video / audio.
The COMPONENT IN jack is also used as the AV IN jack.
Connect the video cable to the COMPONENT IN [Y/VIDEO] jack and the audio cable to the COMPONENT IN [RAUDIOL] jacks.
7 H (HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
N Using the sound function is restricted when connecting headphones to the TV.
N Prolonged use of headphones at a high volume may damage your hearing.
N You will not hear sound from the speakers when you connect headphones to the TV.
N The headphone volume and TV volume are adjusted separately.
English -
Book_350_BN68-01975N_00L02.indb 4
2009-04-07 3:35:35
Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV.
N The performance of the remote control may be affected by bright light.
N The product color and shape may vary depending on the model.
3
4
6
7
$
%
^
&
*
9
0
)
a
English -
Book_350_BN68-01975N_00L02.indb 5
2009-04-07 3:35:35
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see Antennas with 300
Flat Twin Leads below.
If your antenna has one lead that looks like the diagram to the right, see Antennas with 75
Round Leads.
If you have two antennas, see Separate VHF and UHF Antennas.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
UHF
VHF
ANT IN
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
ANT IN
ANT OUT
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
English -
Book_350_BN68-01975N_00L02.indb 6
2009-04-07 3:35:36
Incoming cable
TV Rear
Splitter
RF (A/B) Switch
Cable Box
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
N This terminal might be labeled ANT IN, VHF IN or simply, IN.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4. Connect an RF cable between the ANT OUT terminal on the cable box and the BIN terminal on the RF(A/B) switch.
5. Connect another cable between the other OUT terminal on the splitter and the AIN terminal on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
After you have made this connection, set the A/B switch to the A position for normal viewing. Set the A/B switch to the B
position to view scrambled channels. (When you set the A/B switch to B, you will need to tune your TV to the cable boxs
output channel, which is usually channel 3 or 4.)
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
TV Rear Panel
1. Connect an HDMI Cable between the HDMI/PC IN [HDMI(DVI)] jack on the TV and the HDMI jack on the DVD / Blu-ray Player
or Cable Box / Satellite receiver (Set-Top Box).
N What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
English -
Book_350_BN68-01975N_00L02.indb 7
2009-04-07 3:35:36
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI/PC IN [HDMI(DVI)] jack on the TV and the DVI jack
on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the HDMI/PC IN [AUDIO] jack on the TV and the DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box).
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
N When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN jack.
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to
your TV.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR]
jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD /
Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
N Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections. For example, if connecting a Component video cable to
COMPONENT IN, connect the audio cable to COMPONENT IN also.
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
English -
Book_350_BN68-01975N_00L02.indb 8
2009-04-07 3:35:37
Connecting a VCR
TV Rear Panel
1. Connect a Video Cable between the AV IN [Y/VIDEO] jack on the TV and the VIDEO OUT jack on the VCR.
2. Connect Audio Cables between the AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR.
N If you have a mono (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks
of the TV. Alternatively, connect the cable to the R jack. If your VCR is stereo, you must connect two cables.
N Each VCR has a different back panel configuration.
N When connecting a VCR, match the color of the connection terminal to the cable.
English -
Book_350_BN68-01975N_00L02.indb 9
2009-04-07 3:35:37
Connecting a Camcorder
Using a Video Cable
TV Rear Panel
Camcorder
1. Connect a Video Cable between the AV IN [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2. Connect Audio Cables between the AV IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
N Each Camcorder has a different back panel configuration.
N When connecting a Camcorder, match the color of the connection terminal to the cable.
TV Rear Panel
HD Camcorder
1 HDMI Cable (Not supplied)
1. Connect an HDMI Cable between the HDMI/PC IN [HDMI(DVI)] jack on the TV and the HDMI OUT jack on the camcorder.
English - 10
Book_350_BN68-01975N_00L02.indb 10
2009-04-07 3:35:37
Connecting a PC
Using a D-Sub Cable
TV Rear Panel
PC
1. Connect an HDMI/DVI cable between the HDMI/PC IN [HDMI(DVI)] jack on the TV and the PC output jack on your computer.
2. Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the HDMI/PC IN [AUDIO] jack on the TV and the Audio Out jack of
the sound card on your computer.
N When using an HDMI/DVI cable connection, you must use the HDMI/PC IN [HDMI(DVI)] terminal.
PC
1. Connect an HDMI cable between the HDMI/PC IN [HDMI(DVI)] jack on the TV and the PC output jack on your computer.
N Each PC has a different back panel configuration.
English - 11
Book_350_BN68-01975N_00L02.indb 11
2009-04-07 3:35:39
Operation
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to
select and adjust different functions.
1. Press the MENU button.
The main menu is displayed on the screen. Its left side has the following icons: Picture,
Sound, Channel, Setup, Input.
2. Press the or button to select one of the icons.
Press the or button to access the icons sub-menu.
3. Press the or button to move to items in the menu.
Press the ENTERE button to enter items in the menu.
4. Press the /// button to change the selected items.
N Press the RETURN button to return to the previous menu.
5. Press the EXIT button to exit from the menu.
Using the remote control buttons
Button
MENU
RETURN R
EXIT e
Operations
Display the main on-screen menu.
Return to the previous menu.
Exit the on-screen menu.
Button
///
ENTERE
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
UMove
EEnter
RReturn
Operations
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Sound
Input
UMove
TV
EEnter
RReturn
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
UMove
EEnter
Brightness
45
U Move
lr Adjust
R Return
Brightness
80
U Move
lr Adjust
RReturn
R Return
English - 12
Book_350_BN68-01975N_00L02.indb 12
2009-04-07 3:35:39
English - 13
Book_350_BN68-01975N_00L02.indb 13
2009-04-07 3:35:40
Channel Control
Configuring the Channel Menu
Antenna Air / STD / HRC / IRC
TV
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
N STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point, the signal source has been selected.
: Air
Auto Program
Channel List
Sound
Fine Tune
Color System
: Auto
Channel
Setup
Input
Auto Program
Channel
Picture Antenna
UMove
EEnter
RReturn
First, select the correct signal source (Air, STD, HRC, or IRC).
N The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two
minutes.
N Press the ENTERE button at any time to interrupt the memorization process and return to the Channel menu.
N To stop the search before it has finished, press the ENTERE button with Stop selected.
Channel List
For detailed procedures on using the Channel List, refer to the Managing Channels instructions.(refer to page 15)
O You can select these options by simply pressing the CH LIST button on the remote control.
Fine Tune
Use fine tuning to manually adjust a particular channel for optimal reception.
N If you do not store the fine-tuned channel in memory, adjustments are not saved.
N * will appear next to the name of fine-tuned channels.
N To reset the fine tuning setting, press the button to select Reset, then press the ENTERE button.
English - 14
Book_350_BN68-01975N_00L02.indb 14
2009-04-07 3:35:40
Managing Channels
Using the Channel List, you can conveniently lock/unlock or add/delete channels
Channel List
Add / Delete
Using the Channel List, you can add channels.
1. Press the CH LIST button.
2. Move to the # field by pressing the , , or button, select a channel to be added,
and press the ENTERE button to add the channel.
N If you press the ENTERE button again, the c symbol next to the channel disappears
and the channel is not added.
Lock / Unlock
Air
1 / 10
Ch.
Air 2
Air 3
Air 4
Air 5
Air 6
Air 7
Air 8
This feature allows you to prevent unauthorized users, such as children, from watching
c
Air 9
unsuitable programmes by muting out video and audio.
c
Air 10
N \ is active when Child Lock is selected to On. (refer to page 21)
Air 11
c
1. Press the CH LIST button.
# Add
\ Lock
2. Move to the \ field by pressing the , , or button, select a channel to be locked,
n Move
E Enter
and press the ENTERE button.
CH Page
R Return
N The PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu.
N If you press the ENTERE button again, the c symbol next to the channel disappears and the channel lock is cancelled.
N A blue screen is displayed when Child Lock is activated.
N Select On or Off in Child Lock to easily turn the channels which selected on \ to be active or inactive.
English - 15
Book_350_BN68-01975N_00L02.indb 15
2009-04-07 3:35:40
Picture Control
Configuring the Picture Menu
Mode
TV
You can select the type of picture which best corresponds to your viewing requirements.
T Press the TOOLS button to display the Tools menu. You can also set the picture mode
by selecting Tools Picture Mode.
Dynamic
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Sound
Brightness 45
Sharpness 50
Channel Color 50
Tint (G/R)
G50 R50
Setup Advanced Settings
Picture Options
Reset
: OK
Input
UMove
EEnter
RReturn
Advanced Settings
Samsungs new TVs allow you to make even more precise picture settings than previous
models.
N Advanced Settings is available in Standard or Movie mode.
N In PC mode, you can only make changes to Gamma and White Balance from among
the Advanced Settings items.
Black Tone Off / Dark / Darker / Darkest
TV
Advanced Settings
: Off
Dynamic Contrast
: Medium
Gamma
: 0
Sound
Color Space
: Native
White balance
Channel Flesh Tone
: 0
Edge Enhancement : On
Setup
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast Off / Low / Medium / High
Input
UMove
EEnter
RReturn
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)
Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most
natural color.
Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
Native: Native Color Space offers deep and rich color tone.
White Balance
You can adjust the color temperature for more natural picture colors.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Color temperature in the light areas by
changing the values of R, G, B. Recommended for advanced users only.
Reset: The previously adjusted white balance will be reset to the factory defaults.
N Changing the adjustment value will refresh the adjusted screen.
English - 16
Book_350_BN68-01975N_00L02.indb 16
2009-04-07 3:35:40
Flesh Tone
Picture Options
N In PC mode, you can only make changes to the Color Tone and Size from among the
items in Picture Options.
Color Tone Cool / Normal / Warm1 / Warm2
TV
: Normal
: 16:9
: Auto
: Normal
: Off
Size
Digital NR
Sound
HDMI Black Level
Film Mode
Channel
Setup
Input
Size
Picture Options
UMove
EEnter
RReturn
Occasionally, you may want to change the size of the image on your screen. Your TV comes with screen size options, each
designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as
well. In general, though, you should view the TV in 16:9 mode as much as possible.
O Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
16:9 : Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom : Magnify the size of the picture more than 4:3.
Zoom : Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3 : This is the default setting for a video movie or normal broadcasting.
Screen Fit : Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals
are input.
N Temporary image retention may occur when viewing a static image on the set for more than two hours.
N After selecting Zoom mode: Select
by pressing the or button. Use the or button to move the picture up and
down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.
N Wide Zoom: Move the screen up/down using the or button after selecting the
by pressing the or ENTERE
button.
N After selecting Just Scan in HDMI (1080i) or Component (1080i) mode: Select
by pressing the or button. Use the ,
, or button to move the picture. Press the ENTERE button.
Reset : Press the or button to select Reset, then press the ENTERE button. You can initialize the setting.
N HD (High Definition): 16:9 - 1080i, 720p (1280x720)
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
Picture Size
PC
16:9, 4:3
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed.
HDMI Black Level Normal / Low
You can select the black level on the screen to adjust the screen depth.
N This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not
be compatible with all external devices.
Film Mode Off / Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
N Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).
Reset OK / Cancel
Resets all picture settings to the default values.
English - 17
Book_350_BN68-01975N_00L02.indb 17
2009-04-07 3:35:41
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesnt equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode
Resolution
IBM
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
1280 x 720
MAC
VESA CVT
VESA DMT
VESA GTF
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
35.910
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.500
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
59.950
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
70.000
Sync Polarity
(H / V)
+/-/+
-/-/-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
-/+
N When using an HDMI / DVI cable connection, you must use the HDMI/PC IN [HDMI(DVI)] jack.
English - 18
Book_350_BN68-01975N_00L02.indb 18
2009-04-07 3:35:41
Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
T Press the TOOLS button to display the Tools menu. You can also set the Auto
Adjustment by selecting Tools Auto Adjustment.
N This function does not work in DVI-HDMI mode.
TV
Picture
Picture Mode
: Standard
Backlight 8
Contrast 95
Brightness 45
Sharpness 50
Channel Auto Adjustment
Screen
Setup Advanced Settings
Picture Options
Reset
: OK
Sound
Input
UMove
EEnter
RReturn
Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PCs screen positioning if it does not fit the TV screen. Press the or button to adjusting the Vertical-Position. Press
the or button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
English - 19
Book_350_BN68-01975N_00L02.indb 19
2009-04-07 3:35:41
Sound Control
Configuring the Sound Menu
Mode Standard / Music / Movie / Clear Voice / Custom
You can select a sound mode to suit your personal preferences.
O You can select these options by simply pressing the S.MODE button on the remote
control.
Equalizer
Sound
TV
Picture Mode
: Custom
Equalizer
SRS TruSurround HD : Off
Multi-Track Sound
: Mono
Auto Volume
: Off
Channel Sound Select
: Main
Sound
Setup
Input
UMove
EEnter
RReturn
Balance L/R
Multi-Track Sound
T Press the TOOLS button to display the Tools menu. You can also configure the Multi-Track Sound mode by selecting Tools
Multi-Track Sound.
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
N Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
English - 20
Book_350_BN68-01975N_00L02.indb 20
2009-04-07 3:35:41
Setup
Configuring the Setup Menu
Language
TV
Setup
Language
: English
Time
Sound Child Lock
: Off
Change PIN
Caption
Channel Game Mode
: Off
Melody
: Off
: Off
Setup Energy Saving
AV Color System
PIP
Time
Clock Set
Setting the clock is necessary in order to use the various timer features of the TV.
Input
UMove
EEnter
O The current time will appear every time you press the INFO button.
N If you disconnect the power cord, you have to set the clock again.
N You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.
RReturn
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
T Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools Sleep Timer.
N To cancel the Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first.
On Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting youve chosen, set to
Activate.)
Off Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting youve chosen, set to
Activate.)
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat or Sat~Sun.
Volume: Set the desired volume level.
Channel: Select the desired channel.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
N Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.
English - 21
Book_350_BN68-01975N_00L02.indb 21
2009-04-07 3:35:42
Change PIN
You can change your personal ID number that is required to set up the TV.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0.
N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0:
POWER (Off), MUTE, 8, 2, 4, POWER (On).
English - 22
Book_350_BN68-01975N_00L02.indb 22
2009-04-07 3:35:42
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see PIP Settings below for details.
T Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools PIP.
N PIP Settings
Main picture
Sub picture
Component
HDMI/DVI, PC
TV, AV
N If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will
disappear.
N You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
Input
UMove
EEnter
RReturn
PIP
TV
Picture PIP
Source
Size
Sound
Position
Channel
Channel
: On
: TV
:
:
: Air3
Setup
Input
PIP On / Off
Setup
TV
UMove
EEnter
RReturn
Input
Configuring the Input Menu
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O Press the SOURCE button on the remote control to view an external signal source.
O You can also watch HDMI mode simply by pressing the HDMI button on the remote
control.
TV / AV / Component / PC / HDMI/DVI
Edit Name
: TV
Sound
Channel
Setup
Input
N You can choose only those external devices that are connected to the TV.
Input
TV
UMove
EEnter
RReturn
Edit Name
Name the device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray
/ HD DVD / DMA
N When connecting an HDMI/DVI cable to the HDMI/PC IN [HDMI(DVI)] port, you should set the HDMI/DVI mode to DVI or DVI
PC in the Edit Name of the Input mode. In this case, a separate sound connection is required.
English - 23
Book_350_BN68-01975N_00L02.indb 23
2009-04-07 3:35:42
Appendix
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply,
please visit Samsung.com or contact the Samsung call center.
Problem
Possible Solution
Poor picture.
Try another channel. / Adjust the antenna. / Check all wire connections.
No picture or sound.
Make sure the Component cables are connected to the correct jacks.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not
your TV.
Snowy picture.
Your cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on picture.
Adjust the Coarse tuning and then adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
If Screen Fit is selected with some external devices, the picture may appear distorted in
the corner of the screen. This symptom is caused by the external devices, not TV.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
N This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
English - 24
Book_350_BN68-01975N_00L02.indb 24
2009-04-07 3:35:42
English - 25
Book_350_BN68-01975N_00L02.indb 25
2009-04-07 3:35:43
LCD-TV
PDP-TV
LFD
inches
VESA Spec. (A * B)
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
Standard Screw
Quantity
M4
M6
M8
M8
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
3
2
1
English - 26
Book_350_BN68-01975N_00L02.indb 26
2009-04-07 3:35:43
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
2. Remove the screws from the center back of the TV, put the screws into the clamps, and
then fasten the screws onto the TV again.
N Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
N Screw Specifications
For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
N Install the TV near to the wall so that it does not fall backwards.
N It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
N Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
Wall
Wall
English - 27
Book_350_BN68-01975N_00L02.indb 27
2009-04-07 3:35:44
Specifications
Model Name
LN22B350
Screen Size
(Diagonal)
22 inch
PC Resolution (Optimum)
Sound
(Output)
Dimensions (WxDxH)
Without Stand
With stand
3W x 2
21.9 x 3.5 x 15.3 inches
(557.5 x 88.8 x 387.7 mm)
21.9 x 8.0 x 16.7 inches
(557.5 x 202.5 x 424.8 mm)
Weight
Without Stand
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
Left / Right
English - 28
Book_350_BN68-01975N_00L02.indb 28
2009-04-07 3:35:44
Book_350_BN68-01975N_00L02.indb 29
2009-04-07 3:35:44
El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en
las partes izquierda, derecha y central de la pantalla debido a las diferencias en la emisin lumnica de la
pantalla. La reproduccin de un DVD o el uso de una consola de videojuegos pueden provocar un efecto
similar en la pantalla. La garanta no cubre los daos causados por los efectos mencionados.
Ver imgenes fijas de videojuegos y PC durante ms tiempo del indicado puede producir restos de imgenes parciales. Para
evitar este efecto, reduzca el brillo y el contraste cuando vea imgenes fijas.
Book_350_BN68-01975N_00L02.indb 1
2009-04-07 3:35:44
Contenido
Informacin General
Control de la imagen
Listado de caractersticas......................................................2
Accesorios.............................................................................2
Aspecto general del panel de control....................................3
Aspecto general del panel de conexiones.............................4
Mando a distancia.................................................................5
Instalacin de las pilas en el mando a distancia...................5
Funcionamiento
Visualizacin de los mens.................................................12
Funcin Plug & Play............................................................13
Control de sonido
Configuracin del men de sonido......................................20
Configuracin
Configuracin del men de configuracin...........................21
Visualizacin PIP (Imagen en imagen)................................23
Espaol
Conexiones
Conexin de antenas de VHF y UHF....................................6
Conexin de TV por cable.....................................................6
Conexin de un reproductor de DVD/Blu-ray/receptor por
cable/satlite (decodificador) a travs de HDMI....................7
Conexin de un reproductor de DVD/Blu-ray/receptor por
cable/satlite (decodificador) a travs de DVI.......................8
Conexin de un reproductor de DVD/Blu-ray/receptor por
cable/satlite (decodificador) a travs de los cables de
componentes.........................................................................8
Conexin de un reproductor de vdeo...................................9
Conexin de una videocmara............................................10
Conexin a un PC...............................................................11
ENTRADA
Configuracin del men de entrada....................................23
Apndice
Identificacin de problemas.................................................24
Instalacin del soporte........................................................25
Desconexin del soporte.....................................................25
Especificaciones del equipo de montaje en
la pared (VESA)..................................................................26
Uso del bloqueo Kensington antirrobos..............................26
Seguridad en el espacio de instalacin...............................27
Fijacin del televisor a la pared...........................................27
Especificaciones..................................................................28
Antes de usar el equipo lea este manual para evitar
fallas y guarde para futuras referencias.
Licencia
TruSurround HD, SRS y
el smbolo son marcas comerciales de SRS Labs, Inc.
TruSurround HD est incorporada bajo licencia de SRS Labs,Inc.
Smbolo
N
Nota
Botn de una
pulsacin
Botn TOOL
Espaol -
Book_350_BN68-01975N_00L02.indb 1
2009-04-07 3:35:44
Informacin General
N Las ilustraciones de este manual se proporcionan slo como referencia y pueden ser diferentes del producto real. El diseo y las
especificaciones del producto se pueden cambiar sin previo aviso para mejorar el rendimiento del producto.
Listado de caractersticas
Accesorios
Cable de alimentacin
Pao de limpieza
Manual de instrucciones
(M4 x L16)
Tornillo del soporte x 2
N Asegrese de que los siguientes elementos se incluyen con el televisor de pantalla LCD. Si falta alguno, pngase en contacto
con su distribuidor.
N El color y la forma de los componentes pueden variar segn el modelo.
Espaol -
Book_350_BN68-01975N_00L02.indb 2
2009-04-07 3:35:45
4 5
1 SENSOR DEL MANDO A DISTANCIA: Dirija el mando a distancia hacia este punto del TV.
2 SOURCEE: Cambia entre todas las fuentes de entrada disponibles. En el men de la pantalla, utilice este botn del mismo
modo que el botn ENTERE del mando a distancia.
3 y: Plselos para subir o bajar el volumen. En el men de la pantalla, utilice los botones y del mismo modo
que los botones y del mando a distancia.
4 P (Encendido): Pulse para encender o apagar el TV.
5 INDICADOR DE ALIMENTACIN: Parpadea y se apaga cuando se enciende el aparato y se ilumina en el modo en espera.
6 z: Permiten cambiar de canal. En el men de la pantalla, utilice los botones z del mismo modo que los
botones y del mando a distancia.
7 MENU: Pulse para ver en pantalla un men con las caractersticas del TV.
8 ALTAVOCES
Espaol -
Book_350_BN68-01975N_00L02.indb 3
2009-04-07 3:35:45
4
5
Espaol -
Book_350_BN68-01975N_00L02.indb 4
2009-04-07 3:35:46
Mando a distancia
N Puede utilizar el mando a una distancia del televisor de hasta 7 metros.
N El exceso de luz puede influir en el rendimiento del mando a distancia.
N El color y la forma del producto pueden variar segn el modelo.
3
4
6
7
$
%
^
&
*
9
0
)
a
Espaol -
Book_350_BN68-01975N_00L02.indb 5
2009-04-07 3:35:46
Conexiones
Conexin de antenas de VHF y UHF
Si la antena tiene un conjunto de cables como el que se muestra en el diagrama de la
derecha, consulte Antenas de par de cables planos de 300 a continuacin.
ANT IN
UHF
VHF
ANT IN
2. Conecte el otro extremo del cable en el terminal ANT IN de la parte posterior del TV.
ANT IN
ANT OUT
ANT IN
Espaol -
Book_350_BN68-01975N_00L02.indb 6
2009-04-07 3:35:47
Cable de entrada
Conmutador RF (A/B)
Servicio de cable
1. Busque y desconecte el cable que est conectado al terminal ANT IN del decodificador.
N Este terminal puede estar indicado como ANT IN, VHF IN o IN.
2. Conecte este cable al divisor de dos vas.
3. Conecte un cable RF entre un terminal OUTPUT del divisor y el terminal IN del decodificador.
4. Conecte un cable RF entre el terminal ANT OUT del decodificador y el terminal BIN del conmutador RF A/B.
5. Conecte otro cable entre el otro terminal OUT del divisor y el terminal AIN del conmutador de RF (A/B).
6. Conecte el ltimo cable RF entre el terminal OUT del conmutador RF (A/B) y el terminal ANT IN en la parte posterior del
televisor.
Una vez hecha esta conexin, coloque el conmutador A/B en la posicin A para la visualizacin normal. Coloque el
conmutador A/B en la posicin B para ver los canales codificados. (Cuando site el conmutador A/B en B, deber sintonizar
el TV al canal de salida del decodificador, que normalmente es el canal 3 o 4.)
1. Conecte un cable HDMI entre el terminal HDMI/PC IN [HDMI(DVI)] del televisor y el terminal HDMI del reproductor DVD/Bluray o receptor por cable/satlite (decodificador).
N Qu es HDMI?
HDMI, o interfaz multimedia de alta definicin, es una interfaz que permite la transmisin de seales digitales de audio y de
vdeo mediante un solo cable.
La diferencia entre los dispositivos HDMI y DVI es que el HDMI es ms pequeo y tiene instalada la funcin de codificacin
HDCP (proteccin alta de la copia digital del ancho de banda).
N Cada reproductor de DVD / Blu-ray o receptor de televisin por cable / satlite (decodificador) tiene una configuracin
diferente del panel posterior.
Espaol -
Book_350_BN68-01975N_00L02.indb 7
2009-04-07 3:35:47
1. Conecte un cable de DVI a HDMI o un adaptador de DVI-HDMI entre el terminal HDMI/PC IN [HDMI(DVI)] del televisor y el
terminal DVI del reproductor DVD / Blu-ray / receptor por cable/satlite (decodificador).
2. Conecte los cables de audio entre el terminal HDMI/PC IN [AUDIO] del televisor y el reproductor DVD/Blu-ray/receptor por
cable/satlite (decodificador).
N Cada reproductor de DVD / Blu-ray o receptor de televisin por cable/satlite (decodificador) tiene una configuracin
diferente del panel posterior.
N Cuando conecte un reproductor de DVD / Blu-ray / receptor por cable / satlite (decodificador), debe hacer coincidir los
colores del terminal de conexin y del cable.
N Cuando se usa una conexin de cable HDMI/DVI, se debe conectar en el terminal HDMI (DVI) IN.
Conexin de un reproductor de DVD/Blu-ray/receptor por cable/satlite (decodificador) a travs de los cables de componentes
Los terminales del panel posterior del televisor facilitan la conexin de un reproductor de DVD / Blu-ray / receptor por cable /
satlite (decodificador) al TV.
Panel posterior del TV
Reproductor DVD/Blu-ray/receptor por cable/
satlite (decodificador)
1. Conecte un cable de componentes entre los terminales COMPONENT IN [Y, PB, PR] del televisor y los terminales
COMPONENT [Y, PB, PR] del reproductor de DVD / Blu-ray / receptor por cable/satlite (decodificador).
2. Conecte cables de audio entre los terminales COMPONENT IN [R-AUDIO-L] del televisor y los terminales AUDIO OUT
reproductor de DVD / Blu-ray / receptor por cable / satlite (decodificador).
N El vdeo de componentes separa el vdeo en Y (Luminancia (brillo)), el Pb (azul) y el Pr (rojo) para realzar la calidad del
video. Las conexiones de audio y de vdeo de componentes deben coincidir. Por ejemplo, si conecta un cable de vdeo
de componentes a COMPONENT IN, conecte tambin el cable de audio a la misma entrada COMPONENT IN.
N Cada reproductor de DVD / Blu-ray o receptor de televisin por cable/satlite (decodificador) tiene una configuracin
diferente del panel posterior.
N Cuando conecte un reproductor de DVD / Blu-ray / receptor por cable / satlite (decodificador), debe hacer coincidir los
colores del terminal de conexin y del cable.
Espaol -
Book_350_BN68-01975N_00L02.indb 8
2009-04-07 3:35:48
1. Conecte un cable de vdeo entre los terminales AV IN [Y/VIDEO] del televisor y el terminal VIDEO OUT del aparato de vdeo.
2. Conecte los cables de audio entre los terminales AV IN [R-AUDIO-L] del televisor y los terminales AUDIO OUT del aparato de
vdeo.
N Si tiene un reproductor de vdeo mono (sin estreo), use un conector Y (no suministrado) para conectar los terminales
de entrada de audio izquierdo o derecho del TV. Tambin se puede conectar el cable al terminal R. Si el vdeo es
estreo, tendr que conectar dos cables.
N Cada aparato de vdeo tiene una configuracin diferente del panel posterior.
N Cuando conecte un aparato de vdeo, debe hacer coincidir los colores del terminal de conexin y del cable.
Espaol -
Book_350_BN68-01975N_00L02.indb 9
2009-04-07 3:35:48
Videocmara
1. Conecte un cable de vdeo entre el terminal AV IN [VIDEO] del televisor y el terminal VIDEO OUT de la videocmara.
2. Conecte los cables de audio entre los terminales AV IN [R-AUDIO-L] del televisor y los terminales AUDIO OUT de la
videocmara.
N Cada videocmara tiene una configuracin distinta en el panel posterior.
N Cuando conecte una videocmara, debe hacer coincidir los colores del terminal de conexin y del cable.
Videocmara HD
1 Cable HDMI (no incluido)
1. Conecte un cable HDMI entre el terminal HDMI/PC IN [HDMI(DVI)] del televisor y el terminal HDMI OUT de la videocmara.
Espaol - 10
Book_350_BN68-01975N_00L02.indb 10
2009-04-07 3:35:48
Conexin a un PC
Uso de un cable D-Sub
Panel posterior del TV
PC
PC
1. Conecte un cable HDMI entre los terminales HDMI/PC IN [HDMI(DVI)] del televisor y el terminal de salida PC del ordenador.
N Cada PC tiene una configuracin distinta en el panel posterior.
Espaol - 11
Book_350_BN68-01975N_00L02.indb 11
2009-04-07 3:35:50
Funcionamiento
Visualizacin de los mens
Antes de usar el televisor, siga los pasos siguientes para conocer cmo explorar el men,
con el fin de seleccionar y ajustar diversas funciones.
1. Pulse el botn MENU.
En la pantalla aparece el men principal. En el lado izquierdo hay los siguientes iconos:
Imagen, Sonido, Canal, Configuracin, Entrada.
2. Pulse el botn o para seleccionar uno de los iconos.
Pulse el botn o para acceder al submen del icono.
3. Pulse el botn o para desplazarse por los elementos del men.
Pulse el botn ENTERE para acceder a los elementos del men.
4. Pulse el botn /// para cambiar los elementos seleccionados.
N Pulse el botn RETURN para volver al men anterior.
5. Pulse el botn EXIT para salir del men.
Uso de los botones del mando a distancia
Botn
MENU
RETURN R
EXIT e
Funcin
Mostrar el men de pantalla principal.
Volver al men anterior.
Salir del men de pantalla principal.
Botn
///
ENTERE
TV
Imagen
Picture Modo
: Normal
Luz de fondo 8
Contraste 95
Sound
Brillo 45
Definicin 50
Channel Color 50
Tinte (V/R)
V50 R50
Setup Configuracin avanzada
Opciones de imagen
Reiniciar
: Aceptar
Input
U Mover
E Ingresar
R Regresar
Funcin
Mueva el cursor y seleccione una opcin.
Seleccionar la opcin marcada.
Confirmar la configuracin.
TV
Imagen
Picture Modo
: Normal
Luz de fondo 8
Contraste 95
Brillo 45
Definicin 50
Channel Color 50
Tinte (V/R)
V50 R50
Setup Configuracin avanzada
Opciones de imagen
Reiniciar
: Aceptar
Sound
Input
U Mover
E Ingresar
TV
Imagen
Picture Modo
: Normal
Luz de fondo 8
Contraste 95
Sound
Brillo 45
Definicin 50
Channel Color 50
Tinte (V/R)
V50 R50
Setup Configuracin avanzada
Opciones de imagen
Reiniciar
: Aceptar
Input
U Mover
E Ingresar
Brillo
U Mover
lr Ajustar
Brillo
R Regresar
80
U Mover
R Regresar
45
R Regresar
lr Ajustar
R Regresar
Espaol - 12
Book_350_BN68-01975N_00L02.indb 12
2009-04-07 3:35:50
Espaol - 13
Book_350_BN68-01975N_00L02.indb 13
2009-04-07 3:35:51
TV
Antes de empezar a memorizar los canales disponibles, debe indicar el tipo de origen de la
seal conectada al TV (es decir, antena o sistema de cable).
N STD, HRC e IRC identifican los distintos tipos de sistemas de TV por cable. Pngase en
contacto con su proveedor de cable para averiguar el tipo de sistema de cable existente
en su zona. En este momento, ya se ha seleccionado el origen de la seal.
: Aire
Prog. Auto
Lista de canales
Sound
Sintonia Fina
: Auto
Color Sistema
Channel
Setup
Input
Prog. Auto
Canal
Picture Aire/Cable
U Mover
E Ingresar
R Regresar
En primer lugar, seleccione el origen de seal correcto (Aire, STD, HRC o IRC).
N El televisor pasar automticamente por todos los canales disponibles y los guardar en la memoria. El proceso dura un par
de minutos.
N Pulse el botn ENTERE en cualquier momento para interrumpir el proceso de memorizacin y volver al men Canal .
N Para detener la bsqueda antes de que termine, pulse el botn ENTERE con la opcin Detener seleccionada.
Lista de canales
Para conocer el procedimiento detallado sobre cmo usar la Lista de canales, consulte las instrucciones de Gestin de los
canales. (Consulte la pgina 15)
O Puede seleccionar estas opciones simplemente pulsando el botn CH LIST del mando a distancia.
Sintonia Fina
Utilice la sintonizacin fina para ajustar manualmente un determinado canal a fin de que la recepcin sea ptima.
N Si no almacena en la memoria el canal que ha ajustado de manera precisa, los ajustes no se guardan.
N * aparecer junto al nombre de los canales cuya sintonizacin se haya ajustado.
N Para restablecer la sintona fina, pulse el botn para seleccionar Reiniciar y, a continuacin, pulse el botn ENTERE.
Espaol - 14
Book_350_BN68-01975N_00L02.indb 14
2009-04-07 3:35:51
Lista de canales
Aire
Agregar / Borrar
Mediante la Lista de canales , puede aadir canales.
1. Pulse el botn CH LIST.
2. Vaya al campo # con los botones , , o , seleccione el canal que desee aadir
y pulse el botn ENTERE para aadir este canal.
N Si vuelve a pulsar el botn ENTERE, el smbolo c que aparece junto al canal
desaparece y el canal no se aade.
Bloquear / Desbloquear
1 / 10
Canal
Aire 2
Aire 3
Aire 4
Aire 5
Aire 6
Aire 7
Aire 8
Aire 9
c
Aire 10
Esta funcin permite bloquear el vdeo y el audio para evitar que los usuarios no autorizados
Aire 11
c
(por ejemplo, los nios) puedan ver programas poco recomendables.
# Agregar
\ Bloquear
N \est activo cuando Bloqueo se configura como Encendido. (Consulte la pgina 21)
E Ingresar
Mover
1. Pulse el botn CH LIST.
R Regresar
Pgina
2. Vaya al campo \ con los botones , , o , seleccione el canal que desee
bloquear y pulse el botn ENTERE.
N Aparece la pantalla para la introduccin del nmero PIN. Escriba su cdigo PIN de 4 dgitos.
N El cdigo PIN predeterminado para un televisor nuevo es 0-0-0-0. Se puede cambiar el PIN seleccionando Cambiar Cdigo
en el men.
N Si vuelve a pulsar el botn ENTERE, el smbolo c que aparece junto al canal desaparece y se cancela el bloqueo del
canal.
N Cuando se activa Bloqueo, se muestra una pantalla azul.
N Seleccione Encendido o Apagado en Bloqueo para activar o desactivar fcilmente los canales seleccionados en \.
Espaol - 15
Book_350_BN68-01975N_00L02.indb 15
2009-04-07 3:35:51
Control de la imagen
Configuracin del men de imagen
Modo
TV
Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualizacin.
T Pulse el botn TOOLS para ver el men Herramientas. Tambin puede configurar el
temporizador seleccionando Herramientas Imagen Modo
Dinmico
Imagen
Picture Modo
: Normal
Luz de fondo 8
Contraste 95
Sound
Brillo 45
Definicin 50
Channel Color 50
Tinte (V/R)
V50 R50
Setup Configuracin avanzada
Opciones de imagen
Reiniciar
: Aceptar
Input
U Mover
E Ingresar
R Regresar
Configuracin avanzada
Los nuevos televisores Samsung permiten una configuracin ms precisa aun de la imagen
que los modelos anteriores.
N Configuracin avanzada est disponible en los modos Normal o Cine.
N En el modo PC, slo se pueden cambiar Gamma y Balance de blanco entre las
opciones de Configuracin avanzada.
Tono del negro Apagado / Oscuro / Ms oscuro / El ms oscuro
TV
Configuracin avanzada
: Apagado
Contraste Dinm.
: Medio
Gamma
: 0
Sound
Espacio de color
: Nativo
Balance de blanco
Channel Tono Piel
: 0
Mejora de perfiles
: Encendido
Setup
Input
U Mover
E Ingresar
R Regresar
Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul). (-3 ~ +3)
Espacio de color
El espacio de color es una matriz compuesta por los colores rojo, verde y azul. Seleccione su espacio de color favorito y disfrute
de unos colores autnticamente naturales.
Auto: El espacio de color automtico ajusta el tono de color natural de acuerdo con las fuentes del programa.
Nativo: El espacio de color nativo proporciona tonos de color profundos y ricos.
Balance de blanco
Espaol - 16
Book_350_BN68-01975N_00L02.indb 16
2009-04-07 3:35:51
Tono Piel
Opciones de imagen
N En el modo PC slo se pueden hacer cambios en los elementos Tono Color y Tamao
de Opciones de imagen
Tono Color Fro / Normal / Tibio1 / Tibio2
N Tibio1 o Tibio2 slo estn disponibles cuando el modo de imagen est configurado en
Cine.
N La configuracin de cada dispositivo externo conectado a una entrada del televisor se
puede ajustar y guardar.
TV
Opciones de imagen
Tamao
Digital NR
Sound
N.neg HDMI
Modo pelcula
Channel
: Normal
: 16:9
: Auto
: Normal
: Apagado
Setup
Input
Tamao
U Mover
E Ingresar
R Regresar
Es posible que alguna vez desee cambiar el tamao de la imagen en la pantalla. El televisor se suministra con varias opciones
de tamao de la pantalla, cada una diseada para que funcione lo mejor posible con tipos especficos de entrada de vdeo. Es
posible que el receptor de satlite o cable tenga tambin su propia gama de tamaos de pantalla. Sin embargo, en general, debe
ver el televisor en el modo 16:9 tanto como sea posible.
O Tambin se puede pulsar varias veces el botn P.SIZE del mando a distancia para cambiar el tamao de la imagen.
16:9: Ajusta el tamao de la imagen a 16:9, adecuado para ver los DVD o las emisiones en formato ancho.
Zoom ancho: Aumenta el tamao de la imagen ms que 4:3.
Zoom: Ampla la imagen ancha de 16:9 (en sentido vertical) para que la imagen ocupe el tamao de la pantalla.
4:3: Es la configuracin predeterminada para una pelcula de vdeo o una emisin normal.
Ajuste pantalla: Use esta funcin para ver toda la imagen sin cortes cuando se reciban seales de HDMI (720p/1080i) o
Componente (1080i).
N Puede producirse una retencin temporal de imagen cuando se ve una imagen esttica durante ms de dos horas.
N Despus de seleccionar el modo Zoom: Seleccione
con los botones o . Utilice los botones o para desplazar la
imagen hacia arriba o hacia abajo. Despus de seleccionar , utilice los botones o para ampliar o reducir el tamao de
la imagen en direccin vertical.
N Zoom ancho: Desplace la pantalla hacia arriba o hacia abajo con los botones o despus de seleccionar
con los
botones o ENTERE.
Despus de seleccionar Ajuste pantalla en los modos HDMI (1080i) o Component (1080i): Seleccione
con los botones
o . Use los botones , , o para mover la imagen. Pulse el botn ENTERE.
Reiniciar: Pulse el botn o para seleccionar Reiniciar y, a continuacin, pulse el botn ENTERE. Puede inicializar la
configuracin.
N HD (alta definicin): 16:9 - 1080i, 720p (1280x720)
N La configuracin de cada dispositivo externo conectado a una entrada del televisor se puede ajustar y guardar.
Fuente entrada
Imagen Tamao
PC
16:9, 4:3
Si la seal de emisin que recibe el televisor es dbil, puede activarse la funcin Digital Noise Reduction para reducir la esttica y
las imgenes superpuestas que pueden aparecer en la pantalla.
N Cuando la seal sea dbil, seleccione alguna de las otras opciones hasta que se vea una imagen de mejor calidad.
N.neg HDMI Normal / Bajo
El televisor se puede configurar para que perciba y procese automticamente las seales de pelcula de todas las fuentes y ajuste
la mejor calidad de imagen.
N Modo pelcula es compatible con TV, Video, Componente (480i/1080i) y HDMI (480i/1080i).
Espaol - 17
Book_350_BN68-01975N_00L02.indb 17
2009-04-07 3:35:51
Modos de pantalla
Si la seal del sistema es igual al modo de seal estndar, la pantalla se ajusta automticamente. Si la seal del sistema no es
igual al modo de seal estndar, ajuste el modo consultando la gua del usuario de la tarjeta de vdeo; de lo contrario, puede no
haber seal de vdeo. La imagen de pantalla se ha optimizado durante la fabricacin para los modos de visualizacin enumerados
a continuacin.
Entradas D-Sub y HDMI/DVI
Mode
Resolucin
Frecuencia horizontal
(KHz)
Frecuencia vertical
(Hz)
IBM
640 x 350
720 x 400
640 x 480
832 x 624
720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
1280 x 720
31.469
31.469
35.000
49.726
35.910
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.500
70.086
70.087
66.667
74.551
59.950
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
70.000
MAC
VESA CVT
VESA DMT
VESA GTF
Frecuencia de reloj de
pxeles
(MHz)
25.175
28.322
30.240
57.284
32.750
74.500
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
85.500
89.040
Polaridad de
sincronizacin
(H/V)
+/-/+
-/-/-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
-/+
N Cuando se usa una conexin de cable HDMI/DVI, se debe conectar en el terminal HDMI/PC IN [HDMI(DVI)].
Espaol - 18
Book_350_BN68-01975N_00L02.indb 18
2009-04-07 3:35:52
Ajuste Automtico
Mediante la funcin de ajuste automtico se puede establecer que el televisor se ajuste
automticamente de acuerdo con las seales de vdeo que reciba. La funcin tambin
ajusta automticamente con ms configuracin y ajusta los valores y las posiciones de la
frecuencia.
T Pulse el botn TOOLS para ver el men Herramientas. Tambin se puede configurar
esta opcin seleccionando Herramientas Ajuste Automtico.
N Esta funcin no se puede utilizar en modo DVI-HDMI.
TV
Imagen
Picture Modo
: Normal
Luz de fondo 8
Contraste 95
Brillo 45
Definicin 50
Channel Ajuste Automtico
Pantalla
Setup Advanced Settings
Opciones de imagen
Reiniciar
: Aceptar
Sound
Input
U Mover
E Ingresar
R Regresar
Pantalla
El propsito del ajuste de la calidad de imagen es eliminar o reducir el ruido de la imagen. Si el ruido no desaparece slo con la
sintonizacin fina, realice los ajustes de frecuencia hasta el mximo y vuelva a realizar la sintonizacin fina. Despus de reducir el
ruido, vuelva a ajustar la imagen para que quede alineada en el centro de la pantalla.
Grueso / Fino
El objetivo del ajuste de la calidad de imagen es eliminar o reducir las interferencias. Si el ruido no se elimina mediante la
sintonizacin fina, ajuste la frecuencia lo mejor que pueda (gruesa) y vuelva a realizar la sintonizacin fina. Despus de reducir el
ruido, vuelva a ajustar la imagen para que quede alineada en el centro de la pantalla.
Posicin de PC
Ajuste la posicin de la pantalla del PC si no se acopla a la pantalla del TV. Pulse el botn o para ajustar la posicin vertical.
Pulse el botn o para ajustar la posicin horizontal.
Reiniciar Imagen
Espaol - 19
Book_350_BN68-01975N_00L02.indb 19
2009-04-07 3:35:52
Control de sonido
Configuracin del men de sonido
Modo Normal / Msica / Cine / Voz clara / Favorito
Puede seleccionar el modo de sonido que se ajuste a sus preferencias personales.
O Puede seleccionar estas opciones pulsando el botn S.MODE del mando a distancia.
Ecualizador
Es posible ajustar los parmetros del sonido segn sus preferencias personales.
Balance I/D
Sonido
TV
Picture Modo
: Favorito
Ecualizador
TruSurround SRS HD : Apagado
Sonido Multi-track
: Mono
Vol.Auto
: Apagado
Channel Seleccionar altavoz : Altavoz de TV
Sel. Sonido
: Principal
Sound
Setup
Input
U Mover
E Ingresar
R Regresar
Sonido Multi-track
T Pulse el botn TOOLS para ver el men Herramientas. Tambin se puede configurar el modo Sonido Multitrackseleccionando Herramientas Sonido Multi-track.
Mono: Elija para canales que emiten en monoaural o si tiene dificultades con la recepcin de seales estreo.
Estreo: Elija para canales que emiten en estreo.
SAP: Elija esta opcin para escuchar el programa de audio independiente, que normalmente es una traduccin de otro
idioma.
N Segn el programa concreto emitido, puede escuchar en Mono, Estreo o SAP.
Seleccionar altavoz
Cuando se ve el televisor conectado a un sistema Cine en casa, se debe apagar el altavoz del televisor para que la salida de
audio del televisor utilice los altavoces del Cine en casa (externos).
Altavoz externo: Utiliza los altavoces externos (Cine en casa) para la salida del sonido.
Altavoz de TV: Utiliza los altavoces del TV para la salida del sonido.
N Si selecciona Altavoz externo en el men Seleccionar altavoz, se limita la configuracin del sonido.
N Los botones de volumen y MUTE no funcionan si Seleccionar altavoz est establecido en Altavoz externo. Configure el
volumen del sistema Cine en casa.
Altavoz de TV
Altavoz externo
Sin seal del vdeo
Espaol - 20
Book_350_BN68-01975N_00L02.indb 20
2009-04-07 3:35:52
Configuracin
Configuracin del men de configuracin
Idioma
TV
Configuracin
Idioma
: Espaol
Tiempo
Sound Bloqueo
: Apagado
Cambiar Cdigo
Subttulo
Channel Modo Juego
: Apagado
Meloda
: Apagado
: Apagado
Setup Ahorro energa
Sistema de color AV
PIP
Tiempo
Config. Reloj
Para usar las diferentes funciones del temporizador del televisor es necesario configurar el
Input
reloj.
U Mover
E Ingresar
R Regresar
O La hora actual aparecer siempre que se pulse el botn INFO.
N Si desconecta el cable de alimentacin, debe configurar el reloj de nuevo.
N Puede ajustar el mes, el da, el ao, la hora y el minuto directamente pulsando los botones numricos del mando a distancia.
Temporizador
El temporizador de desconexin apaga automticamente el televisor despus de un perodo prefijado (30, 60, 90, 120, 150 y 180
minutos).
T Pulse el botn TOOLS para ver el men Herramientas. Tambin puede configurar el temporizador seleccionando
Herramientas Temporizador.
N Para cancelar la funcin Temporizador seleccione Apagado.
Temporizador 1 / Temporizador 2 / Temporizador 3
La activacin y desactivacin del temporizador se puede configurar de tres maneras. Debe ajustar el reloj en primer lugar.
Hora de encendido: Ajuste la hora, los minutos, am/pm y activar/desactivar. (Para activar el temporizador con la
configuracin deseada, establzcalo en Activar.)
Hora de apagado: Ajuste la hora, los minutos, am/pm y activar/desactivar. (Para activar el temporizador con la configuracin
deseada, establzcalo en Activar.)
Repetir: Seleccione Una vez, Cada da, Lun~Vie, Lun~Sb o Sb~Dom.
Volumen: Configure el nivel de volumen deseado.
Canal: Permite seleccionar el canal deseado.
N Puede ajustar la hora, los minutos y el canal pulsando los botones numricos del mando a distancia.
N Apagado automtico
Si activa el temporizador, el televisor se apagar si no se pulsa ningn botn durante 3 horas, despus de que el
temporizador lo haya puesto en marcha. Esta funcin slo est disponible si el temporizador est activado y evita el
recalentamiento que se puede producir si el televisor est encendido durante demasiado tiempo.
Espaol - 21
Book_350_BN68-01975N_00L02.indb 21
2009-04-07 3:35:52
Cambiar Cdigo
Se puede cambiar el nmero ID personal necesario para configurar el televisor.
N Antes de que se muestre la pantalla de configuracin, aparece la pantalla para la introduccin del cdigo PIN. Escriba su
cdigo PIN de 4 dgitos.
N El cdigo PIN predeterminado para un televisor nuevo es 0-0-0-0.
N Si ha olvidado el cdigo PIN, pulse los botones del mando a distancia en la siguiente secuencia para reiniciar el PIN a 0-0-00: POWER (Apagado), MUTE, 8, 2, 4, POWER (Encendido).
Espaol - 22
Book_350_BN68-01975N_00L02.indb 22
2009-04-07 3:35:52
Imagen secundaria
Componente
HDMI/DVI, PC
TV, AV
Configuracin
TV
Input
U Mover
E Ingresar
Origen
Tamao
Sound
Posicin
Canal
Channel
: Encendido
: TV
:
:
: Aire3
Setup
Input
R Regresar
PIP
TV
Picture PIP
U Mover
E Ingresar
R Regresar
ENTRADA
Configuracin del men de entrada
Lista de Origen
Utilice este men para seleccionar TV u otras fuentes de entrada externas como
reproductores de DVD/Blu-ray/receptores de cable y satlite (decodificadores), conectados
al televisor. Permite seleccionar la fuente de entrada que se prefiera.
O Pulse el botn SOURCE del mando a distancia para ver una fuente de seal externa.
O Tambin puede ver el modo HDMI pulsando el botn HDMI del mando a distancia.
TV, AV, Componente1, Componente2, PC, HDMI1/DVI, HDMI2.
N Puede elegir solamente los dispositivos externos que estn conectados al televisor.
Entrada
TV
Picture Lista de Origen
Editar nombre
: TV
Sound
Channel
Setup
Input
U Mover
E Ingresar
R Regresa
Editar Nombre
D un nombre al dispositivo conectado en las tomas de entrada; de esta manera ser ms fcil seleccionar el dispositivo de
entrada.
VCR / DVD / Cable STB / Satlite STB / PVR STB / Receptor AV / Juego / Filmadora / PC / DVI PC / DVI / TV / PTV / Blu-ray /
HD DVD / DMA
N Cuando se conecta un cable HDMI/DVI al puerto HDMI/PC IN [HDMI(DVI)], se debe establecer el modo HDMI/DVI como DVI
o DVI PC en Editar Nombre del modo Entrada. En este caso, se necesita una conexin de sonido independiente.
Espaol - 23
Book_350_BN68-01975N_00L02.indb 23
2009-04-07 3:35:53
Apndice
Identificacin de problemas
Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los
consejos funciona, visite Samsung.com o pngase en contacto con el centro de llamadas de Samsung.
Problema
Posible Solucin
Imagen deficiente.
Intente sintonizar otro canal. / Ajuste la antena. / Compruebe todas las conexiones de
cable.
La calidad de la imagen es
defectuosa.
El sonido es defectuoso.
El televisor no se enciende.
Compruebe que el cable de seal est conectado firmemente con las fuentes del PC.
Compruebe que los cables de los componentes estn conectados en los terminales
correctos.
N El panel LCD TFT utiliza un panel que consta de muchos pxeles de nfimo tamao (3 133 440) que requieren de una
tecnologa altamente sofisticada para su fabricacin. No obstante, puede que existan unos cuantos pxeles brillantes u
oscuros en la pantalla. Estos pxeles no influirn en el rendimiento del aparato.
Espaol - 24
Book_350_BN68-01975N_00L02.indb 24
2009-04-07 3:35:53
1. Coloque el frontal del televisor sobre un pao suave o un cojn encima de una mesa.
N Alinee la parte inferior del televisor con el borde de la mesa.
2. Apriete los dos tornillos de la parte inferior del soporte.
N Levante el producto y apriete los tornillos. Si aprieta los tornillos sin levantar el TV LCD, ste puede inclinarse hacia uno
de los lados.
1. Coloque el frontal del televisor sobre un pao suave o un cojn encima de una mesa.
Alinee la parte inferior del televisor con el borde de la mesa.
2. Retire los dos tornillos de la parte inferior del soporte.
Espaol - 25
Book_350_BN68-01975N_00L02.indb 25
2009-04-07 3:35:54
LCD-TV
PDP-TV
LFD
pulgadas
Especificaciones
VESA (A * B)
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
Cantidad
Tornillo estndar
M4
M6
M8
M8
M6
4
M8
No instale el equipo de montaje mural mientras el televisor est encendido. Se podra producir una descarga elctrica con riesgo de
causar lesiones personales.
3
2
1
Espaol - 26
Book_350_BN68-01975N_00L02.indb 26
2009-04-07 3:35:54
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
3. Monte una cadena fuerte entre las grapas del televisor y de la pared de manera que
quede bien tensada.
N Instale el televisor cerca de la pared para evitar que caiga hacia atrs.
N Las grapas de la pared han de estar a la misma o a menor altura que las grapas
del televisor.
N Cuando desee mover el televisor deber aflojar la cadena.
Pared
Espaol - 27
Book_350_BN68-01975N_00L02.indb 27
2009-04-07 3:35:55
Especificaciones
Nombre del modelo
LN22B450
Tamao de pantalla
(Diagonal)
22 pulg
Resolucin de PC (ptima)
Sonido
(Salida)
3Wx2
Con el soporte
Peso
Sin el soporte
Con el soporte
Consideraciones medioambientales
Temperatura de funcionamiento
Humedad de funcionamiento
Temperatura de almacenamiento
Humedad de almacenamiento
Espaol - 28
Book_350_BN68-01975N_00L02.indb 28
2009-04-07 3:35:55
Book_350_BN68-01975N_00L02.indb 29
2009-04-07 3:35:55