Professional Documents
Culture Documents
V8i
Tutorial
Last Updated: September 06, 2016
Table of Contents
Chapter 1: Getting Started ..........................................................................................................3
1.2
1.3
1.4
1.5
Tutorial
Getting Started
STAAD Advanced Concrete Design is performed using the STAAD RCDC application, which is installed separately
from STAAD.Pro. This program can be launched from the STAAD.Pro Building Designer mode or as a standalone
application.
STAAD RCDC is a highly automated design tool for concrete building structures. This tutorial guides you through
the process of designing the elements in a concrete building. It will also indicate where to change the design
settings to customize design and detailing to meet the requirements of your project or organization.
Tutorial
Getting Started
To open the model and generate analysis
Tutorial
Getting Started
To create a building model from floor plan
Tutorial
Getting Started
To add a shear wall
8. Click Generate.
For this tutorial, you will use the default settings, load settings, and building type. Refer to the STAAD.Pro
User Interface help for details on these settings.
The new input file is generated and opened.
9. Either:
select Analyze > Run Analysis
or
press <Ctrl+F5>
The analysis is performed.
10. Select the Stay in Modeling Mode option and click Done.
Tutorial
Getting Started
To add a shear wall
4. Click OK.
For this tutorial, use the default thickness. The shear wall is added on both levels using this plan by default.
You have now finished all the necessary modifications to this example for this tutorial. The next sections cover
the design and detailing of structural elements using STAAD RCDC.
Tutorial
Slab Design
This section of the tutorial demonstrates how to design and detail a slab, including openings and stairs.
Slab continuity is based on edge conditions where are automatically determined by the program. You can
manually change the end conditions of a slab. You can also change a slab to a cutout, raised slab, or depressed
slab which also affect the edge conditions.
Slab properties are imported from the analysis model where specified. The program will evaluate missing
properties (e.g., slab thickness) during design when not specified.
Tutorial
Slab Design
To start the slab design
3. Either:
select the Design Parameters tool
or
select Settings > Design Parameters
Tutorial
Slab Design
To start the slab design
The Design Settings dialog opens.
10
Tutorial
Slab Design
To specify elevator openings
11
Tutorial
Slab Design
To perform the design
12
Tutorial
Slab Design
To generate construction and detail drawings
or
right-click and select Design from the pop-up menu
The Design Slab dialog for this slab opens at the bottom of the program window.
4. Type 325 (mm) in the Thickness field in the Design Parameters group.
5. Select the Design tool
in the Design Slab dialog.
The slab now passes the design checks.
6. Select the Accept tool to update the design with the changes.
7. Repeat steps 3 through 6 for S17 (row 24) with a thickness of 200 (mm).
13
Tutorial
Slab Design
To generate design calculation reports
Select Reports > Bill of Quantities.
The Bill Of Quantities dialog opens.
14
Tutorial
Slab Design
To save the project and exit
select the Design Calculations tool
or
select Reports > Design Calculations
The Select Slabs dialog opens.
3. Check the boxes for S1 and S12.
For this tutorial you will only output the detailed design for two slabs. You can check the All Slabs option to
include the full design report.
4. Click OK.
The Slab Design opens.
5. Either:
click the Print tool to print out a copy of this report
or
click the Save tool to save an HTML copy of this report
15
Tutorial
Beam Design
This section of the tutorial demonstrates how to design and detail continuous concrete beams.
STAAD RCDC will automatically look for continuous beam members in the STAAD model and group these as a
single physical beam. This way if you have a beam which continuous through columns or one which was subdivided into STAAD.Pro to facilitate support of a transverse member, it will be designed as a single beam entity
in STAAD RCDC.
In this example, you will use most of the default values for all designs.
16
Tutorial
Beam Design
To start the beam design
17
Tutorial
Beam Design
To specify load cases and combinations
4. In the Rebar list, clear the check mark by both 32 (mm) and 40 (mm).
The initial design will be evaluated using smaller size bars where possible.
Note: All other design settings are left as their defaults, but you can make many design and detailing changes
here.
5. Click OK.
Note: There are numerous other detailing and drawing settings in STAAD RCDC that allow you to customize the
concrete detailing for your client or organizations needs. For details on these options, refer to the STAAD RCDC
help by pressing <F1> or selecting Help > Contents.
18
Tutorial
Beam Design
To split beam group at staircase
2. (Optional) If the Load Type selection is not already specified for each load case, select it from the drop-down
list:
LOAD 9: DEAD LOAD
Dead Load
Live Load
3. (Optional) If both loads are not already added to the Primary Load Cases list, click the [+] button when a load
case is selected in the Analysis Load Cases list to add it.
Note: You can import previously saved load cases and combinations to use by clicking the Import Load
Cases & Combinations button and selecting an .ldsx file. Refer to the following steps on how to create a
load settings file.
4. Click OK.
The Load Combinations dialog opens.
5. Click Add From Analysis.
The load combination from the analysis file is added for strength design checks.
6. Add the load combination for use in evaluating crack width:
a. Select the Crack Width tab.
b. Click Add From Template > For Regular Structure.
A service level load combination is added from the STAAD RCDC load combinations template.
Note: Typically, a different (service level) load combination is used for evaluating crack widths. If you
already have appropriate service load combinations in your analytical model, you can add those instead
and select them for use here.
c. Check the options for Crack Width and Stress Limit in the load load combination in the table.
7. Export the load cases and combinations for later use:
a. Click Export Load Cases & Combinations.
The Save As dialog opens.
b. Type Sample1_Loads and click Save.
8. Click OK.
19
Tutorial
Beam Design
To perform the beam design
b. Either:
select the Design tool
or
20
Tutorial
Beam Design
To perform the beam design
select Modify > Design
The Redsign Grp dialog opens at the bottom of the program window.
b. Click-and-drag your mouse cursor over the beam subdivisions starting at 0.75L of the first beam span in
G1.
c. Right-click and select detail from the pop-up menu.
21
Tutorial
Beam Design
To generate beam schedules and drawings
This will remove the fourth layer of bars from the top steel in this segment, creating a new reinforcement
detail for the selected segment.
e.
Click OK.
The section of the capacity curve for the top steel updates to reflect the detailing change.
f. Click Cancel.
Tip: You can use select the beam segments or entire reinforcement zones by their labels just below the
diagram. You can copy and paste reinforcement details between zones or selections.
7. (Optional) Check for any resized beams during design by selecting Reports > Beam Size Changed.
A report including any resized beams during design opens. For this example, none of the beams were resized.
22
Tutorial
Beam Design
To generate beam schedules and drawings
The elevation drawing for this beam group opens in the lower section of the program window.
b. (Optional) Select the Save tool in the Elevation view to save this view as a DXF file.
c. Select the Cancel tool to close the elevation view
3. Generate the elevation and sections for a beam group:
a. Either:
select the Elevation and Section tool
or
Select Reports > Elevation and Section.
The Select Beams dialog opens.
b. Select group 1.B1-B2-B3-B4 in the beams list.
c. Select the following Draw options:
Elevation
Mark Anchorage
Cross section
Show Section Mark
Tip: You can modify the drawing and detailing options by clicking the Detailing & Drawing Settings
button (also by selecting Settings > Detailing & Drawing Settings before using this tool). You can also
customize rebar mark styles from this dialog.
d. Click OK.
The Elevation for the selected beam group opens.
e. Click the Save tool in the view window.
f. Type Tutorial_Beam_Sched.dxf and click Save to save the schedule as a DXF file.
4. Generate a bill of quantities:
a. Either:
select the Bill of Quantities tool
or
Select Reports > Bill of Quantities.
The Bill Of Quantities dialog opens.
23
Tutorial
Beam Design
To generate beam schedules and drawings
24
Tutorial
Beam Design
To generate beam design calculations
25
Tutorial
Beam Design
To save the project and exit
The Select Beams opens.
3. Select 1.B1-B2-B3-B4 and 2. B5-B6-B7-B8-B9 in the list of beam groups.
For this tutorial you will only output the detailed design for two beam groups. You can check the All Beams
option to include the full design report.
4. Click OK.
5. Either:
click the Print tool to print out a copy of this report
or
click the Save tool to save an HTML copy of this report
26
Tutorial
27
Tutorial
28
Tutorial
4. In the Rebar list, clear the check mark by both 32 (mm) and 40 (mm).
The initial design will be evaluated using smaller size bars where possible.
5. Click OK.
Note: There are numerous other detailing and drawing settings in STAAD RCDC that allow you to customize the
concrete detailing for your client or organizations needs. For details on these options, refer to the STAAD RCDC
help by pressing <F1> or selecting Help > Contents.
29
Tutorial
30
Tutorial
c. In the Dia list, select 20 (mm) and then in the Bars list select 3#.
This will place 20mm bars in groups of three in the section.
d. Click on any of the corner bars in the cross section.
The color-coded size of the grouped bars are added to each corner.
e. Repeat steps 4c and 4d to add single (1#) 20mm bars along the faces.
Note: Once you select number of bars, you only need to click twice in the section to update all the face
bars.
f. Select the Redesign tool in the Redesign Grp dialog.
The column now passes design and detailing checks.
g. Select the Accept tool.
Tip: Right-clicking on a wall and selecting Redesign Section allows you to graphically detail a wall section in
the same manner. Try this with W1 in the Column Design table as an extra excercise.
The Design Output table now shows green for the G1 beam indicating it passes.
5. Repeat step 4 to redesign the other failing column (C23).
6. Right-click on the second level column 12 (C12: 6m TO 12m) and select Interaction Surface from the popup menu.
The Interaction Surface dialog opens.
31
Tutorial
Description
32
Tutorial
33
Tutorial
34
Tutorial
35
Tutorial
36
Tutorial
37
Tutorial
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
-32.6100
-32.6100
-32.6100
-32.6100
-32.6100
-26.9000
-26.9000
-26.9000
-26.9000
-26.9000
-26.9000
-21.7400
-18.0000
-18.0000
-18.0000
-18.0000
-18.0000
-18.0000
-18.0000
-14.7500
-14.7500
-14.7500
-13.2500
-8.9500
-8.9500
-8.9500
-8.9500
-8.9500
-8.9500
-8.9500
-6.4600
-6.4600
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
0.0000
38
Tutorial
39
Tutorial
40
Tutorial
41
Tutorial
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
42
Tutorial
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
0 -0.472 0 1.179
-0.472 0 1.18 2.359
-0.39175
-1.976 0 0 2.429
-0.689 0 1.307 2.429
0 -0.689 0 1.307
-0.39175
0 -0.472 0 1.179
-0.472 0 1.18 2.359
0 -1.302 0 2.359
-0.39175
0 -0.611 0 1.604
-0.611 0 1.605 3.489
-1.745 0 0.803 3.489
-1.302 -1.745 0 0.802
-0.39175
0 -2.8 0 4
-2.8 0 4 7.999
0 -2.8 0 4
-2.8 0 4 7.999
-0.39175
0 -2.8 0 4
-2.8 0 4 7.999
0 -2.8 0 4
-2.8 0 4 7.999
-0.39175
0 -2.8 0 4
-2.8 0 4 7.999
0 -2.8 0 4
-2.8 0 4 7.999
-0.39175
0 -2.8 0 4
-2.8 0 4 7.999
0 -2.8 0 4
-2.8 0 4 7.999
-0.39175
-0.56 0 5.829
0 -1.59 0 3.575
-1.59 -0.731 3.576 5.829
-0.39175
-2.816 0 0.988 1.919
0 -2.816 0 0.987
-0.731 0 0 1.919
-0.39175
0 -1.676 0 2.914
-1.676 0 2.915 5.829
-0.56 0 5.829
-0.77875
0 -2.8 0 4
-2.8 0 4 7.999
-0.77875
0 -2.8 0 4
-2.8 0 4 7.999
-0.77875
0 -2.8 0 4
-2.8 0 4 7.999
-0.77875
0 -2.8 0 4
43
Tutorial
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
-2.8 0 4 7.999
-0.77875
0 -1.676 0 2.914
-1.676 0 2.915 5.829
-0.77875
0 -2.106 0 2.248
-2.106 0 2.248 4.849
-0.77875
0 -2.8 0 4
-2.8 4 4.949
-2.8 0 4.95 8.949
-0.77875
0 -2.8 0 4
-2.8 4 5.049
-2.8 0 5.05 9.049
-0.77875
0 -2.8 0 4
-2.8 4 4.899
-2.8 0 4.9 8.899
-0.77875
-1.642 0 2.855 5.709
0 -1.642 0 2.855
-0.39175
0 -2.8 0 4
-2.8 4 4.949
-2.8 0 4.95 8.949
0 -2.8 0 4
-2.8 4 4.949
-2.8 0 4.95 8.949
-0.39175
0 -2.8 0 4
-2.8 4 5.049
-2.8 0 5.05 9.049
0 -2.8 0 4
-2.8 4 5.049
-2.8 0 5.05 9.049
-0.39175
0 -2.8 0 4
-2.8 4 4.899
-2.8 0 4.9 8.899
0 -2.8 0 4
-2.8 4 4.899
-2.8 0 4.9 8.899
-0.39175
-1.642 0 2.855 5.709
0 -1.642 0 2.855
-1.642 0 2.855 5.709
0 -1.642 0 2.855
-0.39175
0 -2.8 0 4
-2.8 4 4.949
-2.8 0 4.95 8.949
0 -2.8 0 4
-2.8 4 4.949
-2.8 0 4.95 8.949
-0.39175
0 -2.8 0 4
-2.8 4 5.049
44
Tutorial
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
UNI
TRAP
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
UNI
TRAP
TRAP
TRAP
UNI
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
45
Tutorial
46
Tutorial
47
Tutorial
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
0 -0.76 0 2.22
-0.76 -0.719 2.22 2.359
0 -0.236 0 1.179
-0.236 0 1.18 2.359
-0.719 0 0 2.429
-0.344 0 1.307 2.429
0 -0.344 0 1.307
0 -0.236 0 1.179
-0.236 0 1.18 2.359
0 -0.453 0 2.359
0 -0.306 0 1.604
-0.306 0 1.605 3.489
-0.607 0 0.803 3.489
-0.453 -0.607 0 0.802
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
-0.249 0 5.829
0 -0.553 0 3.575
-0.553 -0.254 3.576 5.829
-1.024 0 0.988 1.919
0 -1.024 0 0.987
-0.254 0 0 1.919
0 -0.583 0 2.914
-0.583 0 2.915 5.829
-0.249 0 5.829
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.8 0 4
-0.8 0 4 7.999
0 -0.583 0 2.914
-0.583 0 2.915 5.829
0 -0.766 0 2.248
-0.766 0 2.248 4.849
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
48
Tutorial
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
-0.8 4 4.899
-0.8 0 4.9 8.899
-0.571 0 2.855 5.709
0 -0.571 0 2.855
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
-0.571 0 2.855 5.709
0 -0.571 0 2.855
-0.571 0 2.855 5.709
0 -0.571 0 2.855
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
-0.571 0 2.855 5.709
0 -0.571 0 2.855
-0.571 0 2.855 5.709
0 -0.571 0 2.855
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 4.949
-0.8 0 4.95 8.949
0 -0.8 0 4
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
49
Tutorial
UNI
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
UNI
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
TRAP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
-0.8 4 5.049
-0.8 0 5.05 9.049
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
-0.571 0 2.855 5.709
0 -0.571 0 2.855
-0.571 0 2.855 5.709
0 -0.571 0 2.855
0 -0.8 0 4
-0.8 4 4.949
-0.8 -0.498 4.95 6.459
0 -0.583 0 2.914
-0.583 2.915 3.544
-0.583 0 3.545 6.459
-0.498 0 0 2.489
0 -0.8 0 4
-0.8 4 5.049
-0.8 -0.65 5.05 5.799
-0.684 0 2.844 5.799
0 -0.684 0 2.843
-0.65 0 0 3.249
-0.236 0 2.07 3.249
-0.236 1.18 2.069
0 -0.236 0 1.179
0 -0.8 0 4
-0.8 4 4.899
-0.8 0 4.9 8.899
-0.354 0 3.89 8.899
0 -0.354 0 3.89
-0.571 0 2.855 5.709
0 -0.571 0 2.855
-0.125 0 1.952 5.709
0 -0.125 0 1.951
-0.236 0 2.07 3.249
-0.236 1.18 2.069
0 -0.236 0 1.179
-0.299 0 1.572 3.249
0 -0.299 0 1.572
0 -0.583 0 2.914
-0.583 2.915 3.544
-0.583 0 3.545 6.459
-0.36 -0.178 3.921 6.459
0 -0.36 0 3.92
-0.178 0 0 2.489
0 -0.928 0 4.842
-0.928 0 4.842 10.014
-0.918 0 5.373 10.254
0 -0.918 0 5.372
-0.284 0 1.498 3.418
0 -0.284 0 1.497
0 -0.751 0 3.418
-0.119 0 3.779 6.008
0 -0.119 0 3.779
-0.342 0 4.815 9.417
50
Tutorial
51
Tutorial
Index
A
schedules 32
start design 27
analyze 3
beams
design calculations 25
designing 20
elevations 22
load cases 18
load combinations 18
modifying 20
save project 26
schedules 22
split groups 19
start design 16
top elevation 19
Building Planner 5
columns
design calculations 36
designing 30
elevations 32
redesigning section 30
save project 36
pilecaps 3
project settings 15
design code 16
getting started 3
shear walls 6
slab design
starting 8
slabs
construction drawings 13
design 8, 12
design calculations 14
detailing 13
save project 15
standalone 3
Eurocode 16
footings 3
foundations 3
input file 37
term 3, 11, 27
load cases
importing 29
load combinations
importing 29
52
walls
adding 6
Tutorial