Professional Documents
Culture Documents
LEARNING MATERIAL
Sector:
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
1 of 38
MODULE OF INSTRUCTION
Qualification
Unit of Competency
Module Title
Nominal Duration
: 9 Hrs
Introduction
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
2 of 38
TECHNICAL TERMS
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
3 of 38
LEARNING EXPERIENCES
Learning Outcome #1
CONTENTS:
-
Identifying tasks
ASSESSMENT CRITERIA:
-
CONDITIONS:
The student/trainees must be provided with the following:
-
Screwdrivers
Pliers
Punches
Wrenches
files
ASSESSMENT METHOD:
1. Hands on application
2. Direct Observation
3. Practical Demonstration
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
4 of 38
LEARNING EXPERIENCE/ACTIVITIES
Learning Outcome #1: Plan and prepare for tasks to be undertaken
Learning Activities
Special Instruction
1. Read Information Sheet 4.1-1 on
Identifying And Classifying The
Different Hand Tools used in
Computer Hardware Servicing.
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
5 of 38
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
6 of 38
Soldering Tools
Soldering Iron is a device for applying
heat to melt solder in attaching two metal
parts. A soldering iron is composed of a
heated metal tip and an insulated handle.
Heating is often achieved electrically, by
passing a current, supplied through an
electrical cord, through a heating element.
For electrical work, wires are usually
soldered to printed circuit boards, other
wires, or small terminals. A low-power iron
(15-30 Watts) is suitable for this work.
Soldering Tool Stand is a place of the
soldering iron to keep them away from
flammable materials. The stand often also
comes with a sponge and flux pot for
cleaning the tip.
Desoldering Sucker is the removal of
solder and components from a circuit for
troubleshooting, repair purposes and to
salvage components. Electronic
components are often mounted on a circuit
board and it is usually desirable to avoid
damaging the circuit board, surrounding
components, and the component being
removed.
Splicing Tools
Long Nose is used for holding, bending
and stretching the lead of electronic
component or connecting wire.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
7 of 38
Boring Tools
12V Mini-Drill is used to bore or drill
hole in the printed circuit board (pcb).
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
8 of 38
Code No.
Module:
Date Developed
Page
April, 2009
L.R.T.Escobar
9 of 38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
10 of
38
ANSWER KEYS
Answer Key to Self-Check 4.1-1
1. Soldering Tool
2. Splicing Tool
3. Splicing Tool
4. Splicing Tool
5. Boring Tool
6. Auxiliary Tool
7. Soldering Tool
8. Splicing Tool
9. Soldering Tool
10. Boring Tools
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
11 of
38
3. Soldering Stand
9. Wire Splicer
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
12 of
38
Code No.
B
E
C
I
F
Module:
6.
7.
8.
9.
10.
A
H
K
D OR J
L
Date Developed
April, 2009
Page
L.R.T.Escobar
13 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
14 of
38
Learning Outcome #2
CONTENTS:
-
Preparing tools
ASSESSMENT CRITERIA:
-
CONDITIONS:
The student/trainees must be provided with the following:
-
ASSESSMENT METHOD:
4. Hands on application
5. Direct Observation
6. Practical Demonstration
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
15 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
16 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
17 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
18 of
38
NO
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
19 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
20 of
38
NO
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
21 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
22 of
38
NO
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
23 of
38
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
24 of
38
10.
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
25 of
38
2.
3.
Code No.
4.
Module:
5.
Date Developed
April, 2009
Page
L.R.T.Escobar
26 of
38
Code No.
1)
2)
3)
4)
5)
Torque Control
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
27 of
38
Learning Outcome #3
CONTENTS:
-
Function of tools
ASSESSMENT CRITERIA:
-
CONDITIONS:
The student/trainees must be provided with the following:
-
Cleaning
Lubricating
Tightening
Hand sharpening
ASSESSMENT METHOD:
1. Hands on application
2. Direct Observation
3. Practical Demonstration
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
28 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
29 of
38
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
30 of
38
YES
Performance Indicator
NO
N/A
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
31 of
38
ASSESSMENT PLAN
Title of Module
Questioning
Observation
X
X
X
X
X
X
X
Prepared
by:
Checked
by:
Code No.
Date:
Date:
Module:
Written
Unit of competency:
Portfolio
Demonstration
Competency standard:
Evidence Checklist
Date Developed
April, 2009
Page
L.R.T.Escobar
32 of
38
Observation Checklist
Candidates name:
Assessors name:
Assessment
Center:
Competency
standards:
Unit of
competency:
Instructions for the assessor:
1. Observe the candidate Using hand tools
2. Describe the assessment activity and the date on which it was undertaken.
3. Place a tick in the box to show that the candidate completed each aspect of the
activity to the standard expected in the enterprise.
4. Complete the feedback sections of the form.
Date of observation
Description of assessment
activity
Location of assessment
activity
The candidate.
If yes, tick the box
Can identify hand tools according to their
applications.
Yes
No
Feedback to candidate:
Assessor signature:
Code No.
Date:
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
33 of
38
Code No.
Module:
Date Developed
April, 2009
YES
NO
Page
L.R.T.Escobar
34 of
38
Demonstration
Candidates name:
Assessors name:
Unit of competency:
Competency standards:
Date of assessment:
Time of assessment:
Instructions for demonstration
Given the necessary materials the trainee/trainee must be able to: Use appropriate
hand tools and test equipment to given task or application.
Materials and equipment:
Various hand tools
Set of screw driver
Set of pliers
Puncher
Allen wrench
Files
Hacksaw
Soldering iron
Desoldering tool
Ball hammer
Wrenches
Wire stripper
to show if evidence is
demonstrated
Yes
No
N/A
Code No.
Not Satisfactory
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
35 of
38
Written Report
Candidates name:
Assessors name:
Assessment Center
Competency
standards
Unit of
competency:
Task:
Your task is to:
Maintain hand tool
Use the checklist below as a basis for judging whether the candidates
report meets the required competency standards.
The candidates report.
If yes, tick the box
can practice routine maintenance of tools.
YES
Candidates signature:
Date:
Assessors signature:
Date:
Code No.
Module:
Date Developed
April, 2009
NO
Page
L.R.T.Escobar
36 of
38
ACKNOWLEDGMENT
Code No.
Module:
Date Developed
April, 2009
Page
L.R.T.Escobar
37 of
38