Professional Documents
Culture Documents
AM 900 . 1200
1.2.3
SAFETY INSTRUCTIONS
This Manual must be read before mounting
the Airmaster air handling unit. Following
this Manual will ensure this product is operated correctly.
WARNINGS
Service covers may not be opened without
first disconnecting the units power supply
and preventing use.
Delivery date:
Place of installation:
Table of Contents
1. General Information........................................................................................................................................5
2. Technical Specifications.................................................................................................................................6
3. Installation.......................................................................................................................................................6
3.1.
3.2.
Duct Holes............................................................................................................................................................................................................6
3.3.
3.4.
3.5.
Roof Cap................................................................................................................................................................................................................9
3.6.
3.7.
3.8.
Installation Check............................................................................................................................................................................................10
1.
General Information
6. Grilles (optional).
Scope of Delivery:
The Airmaster air handling unit with all options is packed
on pallets.
2. Control panel.
Airlinq Viva
Airlinq Orbit
or
2.
Technical Specifications
AM
Version
900
900
1200
Mixing
Displacement
180
180
450
kg
RAL
9010
9010
9010
mm
600x500 or 1200x1000
Colour, Case
RAL
9010
9010
Dimensions
mm
mm
2400
2400
2400
mm
2400
2400
2500
3.
Installation
NB! For the minimum floor-to-ceiling height for floormounted Airmaster air handling units see section 2.
Technical Specifications.
3.1.
3.2.
Duct Holes
A: CO2 sensor
B: Approximately 1 m
C: Approximately 2 m
3.3.
Installation of an AM 900
1. Dismantle the floor panel of the unit.
2. Lift up the unit. on its adjustable feet.
NB! When lifting the unit, protection must be provided
for the height-adjustable feet to prevent breakage
or deformation. If necessary, insert a suitable block
of wood under the bottom edge of the unit before
lifting it.
Installation of an AM 1200
1. Fit the corner strips or the end panel set and position
the ventilator section of the unit as close to the place
of installation as possible. To achieve this, a pallet
lifter may be used to move the unit.
NB! The wheels are only suitable for fine adjustment
of the unit position. The wheels are not suitable for
transporting the unit.
3.4.
3.5.
1
Roof Cap
2
NB! Please note that the duct holes in the wall must
have an outward downward gradient of 1-2% to
prevent heavy rain from entering the unit.
3.6.
2
5
Sealing on the inside between the pipes (3) and the wall/
ceiling (2) can also be performed between the air handling
unit (1) and the wall/roof (2) at position (5) before fitting
the air handling unit.
3.7.
3.8.
Installation Check
Data and serial numbers noted
Unit fitted
Angle brackets fitted
Pipes and grates fitted
Wall cover fitted
Roof cap fitted
Safety tape removed
Screws retightened
Name of installation engineer:
Comment:
10
yes no
200
418
182
19
315 (2x)
42
62
119
2125*
2323*
789*
275
50
23
85*
588
50
60
80
800
148*
198*
168*
22
601
40
AM900HD
119
200
418
182
19
315 (2x)
42
62
119
1 = Exhaust air
2 = Fresh air
3 = Inlet
4 = Extraction
5 = Electrical connections
6 = Condensate drain
7 = Service cover
8 = Connection of Water
Comfort Heater (Delivery
(FREM) and Return (RETUR)
9 = Wall bracket
2323*
2125*
789*
80
674
85*
800
148*
198*
168*
22
23
1
7
50
687
40
* Dimension n can be reduced by up to 50 mm when there is no panel and the machine shoes are fully screwed down.
Appendix 1 - 11
AM 900 V
315
119
119
5
1
8
2
62
315
42
AM900VM
19
2323*
789*
275
588
50
60
50
6
601
40
280
80
23
85*
800
148*
198*
168*
22
182
418
200
AM900VD
119
119
5
1
42
315
62
315
19
1 = Exhaust air
2 = Fresh air
3 = Inlet
4 = Extraction
5 = Electrical connections
6 = Condensate drain
7 = Service cover
8 = Connection of Water
Comfort Heater (Delivery
(FREM) and Return (RETUR)
9 = Wall bracket
2323*
4
3
789*
85*
674
23
50
6
687
40
280
80
800
148*
198*
168*
22
182
418
200
* Dimension n can be reduced by up to 50 mm when there is no panel and the machine shoes are fully screwed down.
Appendix 1 - 12
AM 1200 H
AM1200HL
1076
2098
400
750
400
248
72
2427
25
8
4
AM1200HR
72
1076
2098
400
750
400
248
496
2427
3
25
1 = Exhaust air
2 = Fresh air
3 = Inlet
4 = Extraction
Appendix 1 - 13
7
8
AM1200HC
1076
2098
400
750
400
248
496
72
2427
8
4
7
AM 1200 V
2098
AM1200VL
72
2427
496
2
400
25
249
1 = Exhaust air
2 = Fresh air
3 = Inlet
4 = Extraction
1
5
248
400
450
Appendix 1 - 14
2098
AM1200VR
1
496
72
2427
3
400
25
248
400
4
450
249
7
8
2098
AM1200VC
496
72
2427
2
400
400
1
5
248
249
450
1 = Exhaust air
2 = Fresh air
3 = Inlet
4 = Extraction
Appendix 1 - 15
12x20
249
130
139
148
101
92
83
207
175
141
107
101
92
83
130
139
148
496
20
107
141
175
6x 1, 6x 2
2427
Wall Cover
305
509
315
AM 900
815
418
60 122
198
Appendix 2 - 16
Appendix 3 - 17
Industrivej 59
Tel: +45 98 62 48 22
info@airmaster.dk
DK - 9600 Aars
Fax: +45 98 62 57 77
www.airmaster-as.com
Denmark