Professional Documents
Culture Documents
Features
Super high Flux output
and high Luminance
RoHS compliant
Application
Mobile phone flash
Automotive interior / exterior lighting
Automotive signal lighting
Automotive forward lighting
General Torch
Architectural lighting
LCD TV / Monitor Backlight
Projector light source
Traffic signals
Task lighting
Decorative / Pathway lighting
Remote / Solar powered lighting
Household appliances
1
Rev 05 2007/08
www.zled.com
For more information about binning and labeling, refer to the Application Note -1
2
Rev 05 2007/08
www.zled.com
Outline Dimensions
1. Dome Type
TOP VIEW
BOTTOM VIEW
Slug
Cathode Mark
Cathode Mark
Lens
Lead
Body
Slug
Notes :
1. All dimensions are in millimeters. (tolerance : 0.2 )
2. Scale : none
3. Slug of package is connected to anode.
*The appearance and specifications of the product may be changed for improvement without
notice.
3
Rev 05 2007/08
www.zled.com
Symbol
[1]
[3]
CRI
Forward Voltage
[4]
Value
Unit
Min
Typ
Max
V [2]
54
80
lm
CCT
6300
Ra
65
70
VF
3.5
4.0
4.5
2 1/2
120
deg.
Thermal resistance
[5]
RJ-B
C /W
Thermal resistance
[6]
RJ-C
7.5
C /W
View Angle
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[7]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
4
Rev 05 2007/08
www.zled.com
Symbol
[1]
[3]
CRI
Forward Voltage
[4]
View Angle
Value
Unit
Min
Typ
Max
V [2]
60
lm
CCT
4000
Ra
73
VF
3.5
4.0
4.5
2 1/2
135
deg.
Thermal resistance
[5]
RJ-B
C /W
Thermal resistance
[6]
RJ-C
7.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[7]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
5
Rev 05 2007/08
www.zled.com
Symbol
[1]
[3]
[4]
Forward Voltage
[5]
Value
Unit
Min
Typ
Max
V [2]
42
55
lm
CCT
3000
Ra
75
80
VF
3.5
4.0
4.5
2 1/2
120
deg.
Thermal resistance
[6]
RJ-B
C /W
Thermal resistance
[6]
RJ-C
7.5
C /W
View Angle
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[7]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
6
Rev 05 2007/08
www.zled.com
Parameter
Radiant Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
Unit
Min
Typ
Max
V [2]
170
510
mW
455
460
465
nm
VF
3.5
4.0
4.5
[3]
[4]
View Angle
Value
2 1/2
130
deg.
Thermal Resistance
[5]
RJ-B
C /W
Thermal Resistance
[6]
RJ-C
7.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[7]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
2. Blue power light sources represented here are IEC825 Class 2 for eye safety
7
Rev 05 2007/08
www.zled.com
5. Blue (B32280)
4-1 Electro-Optical characteristics at IF=700mA, TA=25C
Parameter
Luminous Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
[3]
[4]
View Angle
Value
Unit
Min
Typ
Max
V [2]
8.5
16
lm
455
460
475
nm
VF
3.5
4.0
4.5
2 1/2
130
deg.
Thermal Resistance
[5]
RJ-B
C /W
Thermal Resistance
[6]
RJ-C
7.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[7]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink
2. Blue power light sources represented here are IEC825 Class 2 for eye safety
8
Rev 05 2007/08
www.zled.com
6. Cyan (C32280)
6-1 Electro-Optical characteristics at IF=700mA, TA=25C
Parameter
Luminous Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
[3]
[4]
Value
Unit
Min
Typ
Max
V [2]
54
71
lm
500
505
510
nm
VF
3.5
4.0
4.5
2 1/2
130
deg.
Thermal Resistance
[5]
RJ-B
C /W
Thermal Resistance
[6]
RJ-C
7.5
C /W
View Angle
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[6]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
9
Rev 05 2007/08
www.zled.com
7. Green (G32280)
7-1 Electro-Optical characteristics at IF=700mA, TA=25C
Parameter
Luminous Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
[3]
[4]
View Angle
Value
Unit
Min
Typ
Max
V [2]
54
84
lm
520
527
535
nm
VF
3.5
4.0
4.5
2 1/2
130
deg.
Thermal Resistance
[5]
RJ-B
C /W
Thermal Resistance
[6]
RJ-C
7.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
3.6
Junction Temperature
Tj
125
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[6]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
10
Rev 05 2007/08
www.zled.com
8. Amber (A32280)
7-1 Electro-Optical characteristics at IF=700mA, TA=25C
Parameter
Luminous Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
[3]
[4]
View Angle
Value
Unit
Min
Typ
Max
V [2]
54
68
lm
585
590
595
nm
VF
2.00
2.5
3.00
2 1/2
125
deg.
Thermal Resistance
[5]
RJ-B
C /W
Thermal Resistance
[6]
RJ-C
6.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
2.4
Junction Temperature
Tj
100
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[6]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
11
Rev 05 2007/08
www.zled.com
9. Red (R32280)
8-1 Electro-Optical characteristics at IF=700mA, TA=25C
Parameter
Luminous Flux
Symbol
[1]
Dominant Wavelength
Forward Voltage
[3]
[4]
View Angle
Value
Unit
Min
Typ
Max
V [2]
54
85
lm
618
625
632
nm
VF
2.00
2.5
3.00
2 1/2
125
deg.
Thermal Resistance
[5]
RJ-B
11
C /W
Thermal Resistance
[6]
RJ-C
9.5
C /W
Symbol
Value
Unit
Forward Current
IF
0.8
Power Dissipation
PD
2.4
Junction Temperature
Tj
100
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +120
20,000V HBM
ESD Sensitivity
[6]
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] V is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RJ-B is measured with a SSC metal core pcb.(25 C TJ 110 C)
RJ-C is measured with only emitter. .(25 C TJ 110 C)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------Please do not drive at rated current more than 5 sec. without proper heat sink
12
Rev 05 2007/08
www.zled.com
Distribution
0 .8
0 .6
0 .4
0 .2
0 .0
300
400
500
600
700
800
900
800
900
W a v e le n g th ( n m )
2. Warm White
1 .0
Distribution
0 .8
0 .6
0 .4
0 .2
0 .0
300
400
500
600
700
W a v e le n g th (n m )
13
Rev 05 2007/08
www.zled.com
3. Natural white
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
300
400
500
600
700
800
900
W a v e le n g th [n m ]
1 .0
Distribution
0 .8
0 .6
0 .4
0 .2
0 .0
400
500
600
700
W a v e le n g th (n m )
14
Rev 05 2007/08
www.zled.com
160
140
120
100
80
60
B lu e , R o ya l B lu e
C ya n
G re e n
P u re w h ite , W a rm w h ite , N a tu ra l w h ite
40
20
0
20
40
60
80
100
120
J u n c t io n T e m p e r a t u r e , T J [ C ]
180
160
140
120
100
80
R e d P h o to m e tric
A m b e r P h o to m e tric
60
40
20
0
0
20
40
60
80
100
J u n c tio n T e m p e ra tu re , T J [ C ]
15
Rev 05 2007/08
www.zled.com
600
500
400
300
200
100
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Forward Voltage[V]
700
Red, Amber
Average Forward Current[mA]
600
500
400
300
200
100
0
-0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Forward Voltage[V]
16
Rev 05 2007/08
www.zled.com
1.0
0.8
0.6
0.4
0.2
0.0
0
200
400
600
800
600
800
Red, Amber
1.0
0.8
0.6
0.4
0.2
0.0
0
200
400
Forward Voltage[V]
17
Rev 05 2007/08
www.zled.com
3. Forward Current
0.320
700mA
500mA
0.315
350mA
0.310
20mA
0.305
0.300
0.305
0.310
0.315
CIE(X)
Warm white
0.42
700mA
500mA
0.41
350mA
100mA
CIE(Y)
CIE(Y)
150mA
20mA
0.40
0.39
0.431
0.432
0.433
0.434
0.435
CIE(X)
18
Rev 05 2007/08
www.zled.com
Natural white
0.400
700mA
500mA
0.395
CIE(Y)
350mA
150mA
0.390
20mA
0.385
0.380
0.385
0.390
0.395
0.400
CIE(Y)
19
Rev 05 2007/08
www.zled.com
Current [mA]
800
600
400
RjaT 30 C/W
o
RjaT 25 C/W
200
RjaT 20 C/W
0
25
50
75
100
125
Ambient Temperature [ C]
1000
Current [mA]
800
600
RjaT 30 C/W
400
RjaT 25 C/W
o
RjaT 20 C/W
200
25
50
75
100
125
Ambient Temperature [ C]
20
Rev 05 2007/08
www.zled.com
0
1.0
30
Relative Intensity
0.8
0.6
60
0.4
0.2
0.0
-80
-60
-40
-20
90
Directional angle[deg.]
2. Natural White
0
1.0
30
Relative Intensity
0.8
0.6
60
0.4
0.2
0.0
-80
-60
-40
-20
90
Directional Angle[deg.]
21
Rev 05 2007/08
www.zled.com
0
1.0
30
Relative Intensity
0.8
0.6
60
0.4
0.2
0.0
-80
-60
-40
-20
90
Directional angle[deg.]
4. Amber, Red
0
1.0
30
Relative Intensity
0.8
0.6
60
0.4
0.2
0.0
-80
-60
-40
-20
90
Directional angle[deg.]
22
Rev 05 2007/08
www.zled.com
Recommended Soldering
1. Solder pad
Note :
1. All dimensions are in millimeters (tolerance : 0.2 )
2. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
23
Rev 05 2007/08
www.zled.com
260
240
220
200
Pre-heating
180
Rising
5 C/sec
Cooling
-5 C/sec
150
0
Time
[Hr]
* Caution
1. Reflow soldering should not be done more than one time.
2. Repairing should not be done after the LEDs have been soldered. When
repairing is unavoidable, suitable tools have to be used.
3. Die slug is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
24
Rev 05 2007/08
www.zled.com
Note :
1. The number of loaded products in the reel is 250ea
2. All dimensions are in millimeters
3. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
25
Rev 05 2007/08
www.zled.com
Packaging Structure
Outer Box
TYPE
SIZE(mm)
a
c
b
350 350 370
ZLED
PART : N32180-**
PO CODE : ##
Q'YT : ######
LOT NO : YMDD-#####
DATE : ######
ZLED
Note :
1. 6~10 reels are loaded in box
2. Scale none
3. For more information about binning and labeling, refer to the Application Note - 1
26
Rev 05 2007/08
www.zled.com
27
Rev 05 2007/08
www.zled.com
28
Rev 05 2007/08
www.zled.com
Mouser Electronics
Authorized Distributor
Seoul Semiconductor:
B32280 G32280 N32280 R32280 S32280 W32280 D32280 C32280