Professional Documents
Culture Documents
ALPHA2 L
Circulator pumps
50 Hz
ALPHA2 L
Table of contents
1.
Product introduction
Type key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Performance range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.
Applications
Pumped liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Control of heating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Advantages of pump control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.
Construction
Sectional drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Material specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Motor and control box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.
5.
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Liquid temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change of pump performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
8
8
8
8
8
9
10
Energy labelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Curve conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.
7.
11
11
12
13
14
Accessories
15
Insulating kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ALPHA plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Union and valve kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8.
Product range
17
9.
18
ALPHA2 L
Product introduction
1. Product introduction
The Grundfos ALPHA2 L range offers a host of
advantages:
Energy savings
High-efficient permanent-magnet motors.
Flexibility
Suitable for installation in existing systems.
Comfort
Low-noise operation.
Safety
Built-in electrical and thermal protection of the pump.
User friendliness
Simple setting and operation.
Type key
Example
Fig. 1
ALPHA2 L 15 - 50
130
Pump range
EuP ready
Performance range
60
50
H
[m]
GRUNDFOS
ALPHA2 L
40
30
20
2
ALP
HA2
10
0
0.0
0.0
Fig. 2
0.4
0.8
0.2
1.2
1.6
0.4
2.0
LX
AL
PH
A2
L
X-4
0
2.4
0.6
AL
PH
A2
LX
X -6
0
XX
-50
2.8
Q [m/h]
0.8
Q [l/s]
p
[kPa]
Performance range
ALPHA2 L
Examples of systems
Applications
2. Applications
Fig. 5
Pumped liquids
Fig. 4
Fig. 3
Proportional-pressure control
Uncontrolled pump
CP2
CP1
Fig. 9
A2
H2
A3
Fig. 7
Q1
A1
Q2
Constant-curve control
At constant-curve/constant-speed operation, the pump
runs at a constant speed, independent of the actual
flow demand in the system. The pump performance
follows the selected performance curve, I, II or III.
See fig. 10 where II has been selected. See Change of
pump performance for further information.
H
Q1
Q2
TM061833 3114
PP1
A2
A1
Fig. 6
PP2
Constant-pressure control
2
H1
Fig. 8
Applications
ALPHA2 L
ALPHA2 L
Construction
3. Construction
Grundfos ALPHA2 L is designed for long and troublefree operation due to the canned-rotor type, i.e. pump
and motor form an integral unit without shaft seal and
with only two gaskets for sealing. The bearings are
lubricated by the pumped liquid. These constructions
ensure maintenance-free operation.
The pumps are characterised by the following:
Permanent-magnet/compact-stator motor which
contribute to high efficiency and high starting
torque.
Ceramic shaft and radial bearings which contribute
to long life.
Carbon thrust bearing which contributes to long life.
Stainless-steel rotor can, bearing plate and rotor
cladding which contribute to corrosion-free long life.
Composite impeller which contributes to corrosionfree long life.
Automatic air venting which contributes to easy
commissioning.
Compact design featuring pump head with
integrated control box and control panel which fit
into most common installation.
Sectional drawing
Material specification
Pos.
1
9
Description
Material
Controller
complete
Composite, PC
Rotor can
Stainless steel
Radial bearing
Ceramics
Shaft
Ceramics
Rotor cladding
Stainless steel
Thrust bearing
Carbon
12
Thrust bearing
retainer
EPDM rubber
13
Bearing plate
Stainless steel
16
Impeller
Composite, PP
or PES
18
Pump housing
Cast iron
Gaskets
EPDM rubber
11
EN
AISI/
ASTM
1.4301
304
1.4301
304
1.4301
304
EN-JL 1020
A48-25
Control panel
Stainless-steel versions N
The pump housing of the stainless-steel versions is
painted in red colour. The stainless-steel versions can
be identified by the N in the type key or by the silver
ring around the display. See fig. 15.
GF-350
Construction
ALPHA2 L
POWER
Standard position
ON
ALPHA2 L
Installation
Liquid temperature
Minimum
[C]
Maximum
[C]
110
10
10
110
20
20
110
30
30
110
35
35
90
40
40
70
System pressure
PN 10: Maximum 1.0 MPa (10 bar).
Inlet pressure
Electrical data
Supply voltage
Motor protection
Enclosure class
IP42
Insulation class
Maximum 95 %
Ambient temperature
0-40 C
Temperature class
EMC (electromagnetic
compatibility)
43 dB(A)
Startup
The pump must not be started until the system has
been filled with liquid and vented. Furthermore, the
required minimum inlet pressure must be available at
the pump inlet. The system cannot be vented through
the pump.
The pump is self-venting and does not require venting
before startup.
Liquid temperature
Ambient temperature
[C]
90 C
110 C
0.5 m head
2.8 m head
10.8 m head
POWER
ON
AUTO
PP1
PP2
ALPHA2 L
CP1
CP2
II
III
I
Q
Pump curve
PP1
PP2
CP1
CP2
III
Speed III
II
Speed II
Speed I
Function
The duty point of the pump will move up or down on the lowest proportional-pressure curve, depending on
the heat demand in the system. See fig. 17.
The head (pressure) is reduced at falling heat demand and increased at rising heat demand.
The duty point of the pump will move up or down on the highest proportional-pressure curve, depending on
the heat demand in the system. See fig. 17.
The head (pressure) is reduced at falling heat demand and increased at rising heat demand.
The duty point of the pump will move out or in on the lowest constant-pressure curve, depending on the
heat demand in the system. See fig. 17.
The head (pressure) is kept constant, irrespective of the heat demand.
The duty point of the pump will move out or in on the highest constant-pressure curve, depending on the
heat demand in the system. See fig. 17.
The head (pressure) is kept constant, irrespective of the heat demand.
The pump runs at a constant speed and consequently on a constant curve.
In speed III, the pump is set to run on the maximum curve under all operating conditions. See fig. 17.
Quick venting of the pump can be obtained by setting the pump to speed III for a short period.
The pump runs at a constant speed and consequently on a constant curve.
In speed II, the pump is set to run on the intermediate curve under all operating conditions. See fig. 17.
The pump runs at a constant speed and consequently on a constant curve.
In speed I, the pump is set to run on the minimum curve under all operating conditions. See fig. 17.
ALPHA2 L
Energy labelling
Curve conditions
Energy.grundfos.com
Index
100
90
80
70
EuP
2013
EuP
2015
ALPHA2 L
20
10
0
EEI = 0.23
30
EEI = 0.23
50
40
EEI = 0.27
60
10
6
6. Performance curves and technical data
ALPHA2 L 15-40, 20-40 (N), 25-40 (N), 32-40
1 x 230 V, 50/60 Hz
+
>P@
3
>:@
,,
,
,,,
4>PK@
4>OV@
TM04 2110 2614 - TM03 0868 0705
S
>N3D@
,,,
,,
Speed
P1 [W]
I1/1 [A]
Min.
0.05
Max.
22
0.19
4>PK@
Connections:
System pressure:
Liquid temperature:
ALPHA2 L
W
POWER
ON
Pump type
EEI <
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
L
L
L
L
L
L
L
L
15-40
20-40
20-40 N
25-40
25-40 (N)
25-40 A
32-40
32-40
Dimensions [mm]
Weights [kg]
L1
B1
B2
B3
B4
H1
H2
H3
130
130
150
130
180
180
180
180
78
78
78
78
78
63
78
78
78
78
78
78
78
93
78
78
46
46
46
46
47
32
47
47
49
49
49
49
48
65
65
48
27
27
27
27
26
50
26
26
129
129
129
129
127
135
127
127
58
58
58
79
81
82
81
81
1
1
1
1
1
Net
Gross
Ship. vol.
[m3]
1
1/2
1/4
1/2
1/2
1/2
2
2
1.9
1.9
2.4
1.9
2.1
3.1
2.1
2.1
2.1
2.1
2.6
2.1
2.3
3.3
2.3
2.3
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
11
6
Performance curves and technical data
ALPHA2 L 20-45 N
1 x 230 V, 50 Hz
p
[kPa]
H
[m]
4.5
40
4.0
3.5
30
3.0
2.5
20
2.0
1.5
10
1.0
0.5
0.0
0.0
0.2
P1 0.0
[W]
0.4
0.6
0.1
0.8
1.0
0.2
1.2
0.3
1.4
III
II
I
1.6
0.4
1.8
2.0
0.5
2.2
2.4
0.6
2.6
Q [m/h]
Q [l/s]
0.7
50
III
40
II
30
20
10
0
0.0
0.2
0.4
0.6
0.8
1.0
Speed
P1 [W]
I1/1 [A]
Min.
0.07
Max.
45
0.34
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
System pressure:
Liquid temperature:
Q [m/h]
Pump type
ALPHA2 L 20-45 N
12
Dimensions [mm]
Weights [kg]
L1
B3
B4
H1
H2
Net
Gross
Ship. vol.
[m3]
150
43
43
27
127
1 1/4
1.8
2.0
0.00383
6
ALPHA2 L 15-50, 20-50 N, 25-50 (N), 32-50
1 x 230 V, 50/60 Hz
+
>P@
,
3
>:@
,,,
,,
4>PK@
4>OV@
TM04 2109 2614 - TM03 0868 0705
S
>N3D@
,,,
,,
Speed
P1 [W]
I1/1 [A]
Min.
0.05
Max.
32
0.27
4>PK@
Connections:
System pressure:
Liquid temperature:
Pump type
EEI <
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
0.23
0.23
0.23
0.23
0.23
0.23
L 15-50
L 20-50
L 20-50 N
L 25-50
L 25-50 (N)
L 32-50
Dimensions [mm]
Weights [kg]
L1
B1
B2
B3
B4
H1
H2
H3
130
130
150
130
180
180
78
78
78
78
78
78
78
78
78
78
78
78
46
46
46
46
47
47
49
49
49
49
65
65
27
27
27
27
26
26
129
129
129
129
127
127
58
58
58
79
81
81
1
1
1
1
Net
Gross
Ship. vol.
[m3]
1/2
1/2
1/4
1/2
2
2
2.0
1.9
2.4
1.9
2.1
2.1
2.2
2.1
2.6
2.1
2.3
2.3
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
13
6
ALPHA2 L 15-60, 20-60, 25-60, 32-60
1 x 230 V, 50/60 Hz
+
>P@
,,,
,,
,
3
>:@
4>PK@
4>OV@
TM04 2108 2614 - TM03 0868 0705
S
>N3D@
,,,
,,
Speed
P1 [W]
I1/1 [A]
Min.
0.05
Max.
45
0.38
4>PK@
Connections:
System pressure:
Liquid temperature:
Pump type
EEI <
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
0.23
0.23
0.23
0.23
0.23
0.23
0.23
L
L
L
L
L
L
L
15-60
20-60
20-60 N
25-60
25-60 (N)
25-60 A
32-60
Dimensions [mm]
Weights [kg]
L1
B1
B2
B3
B4
H1
H2
H3
130
130
150
180
180
180
180
78
78
78
78
78
63
78
78
78
78
77
78
93
77
46
46
46
47
47
32
47
49
49
49
48
65
65
48
27
27
27
26
26
50
26
129
129
129
127
127
135
127
58
58
58
81
81
82
81
Net
Gross
Ship. vol.
[m3]
1/2
1/2
1/4
1/2
2
1 1/2
2
1.9
1.9
2.4
2.1
2.1
3.1
2.1
2.1
2.1
2.6
2.3
2.3
3.3
2.3
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
0.00383
1
1
1
1
14
7. Accessories
Insulating kits
Accessories
ALPHA2 L
Product
number
505821
ALPHA plugs
2
Description
ALPHA plug, standard plug connection
ALPHA angle plug, standard angle
plug connection
ALPHA plug, 90 bend, including 4 m
cable
Product number
98284561
98610291
96884669
15
ALPHA2 L
Connection
Rp
ALPHAx
Accessories
mm
3/4
1
1 1/4
1
1 1/4
3/4
1
1 1/4
22
28
15-xx*
G1
15-xx N*
25-xx
529921 529922 529821 529925 529924
G 1 1/2
25-xx N
529971 529972
519805 519806 519807 519808 519809
32-xx
509921 509922
G2
32-xx N
509971
* When ordering UK versions, use product numbers for 25-xx (G 1 1/2).
Available on request.
Fittings including isolating valve.
Thread types
G-threads have a cylindrical form in accordance with
the EN-ISO 228-1 standard.
R-threads have a conical form in accordance with the
ISO 7-1 standard.
In the case of a thread of size 1 1/2", for example, the
threads are specified as G1 1/2 or R1 1/2. Male Gthreads (cylindrical) can only be screwed into female
G-threads. Male R-threads (conical) can be screwed
into female G-threads or R-threads. See fig. 21.
Rp
Rc
TM064955 3415
16
mm
15
18
22
28
42
529995
8. Product range
ALPHA2 L, international
Note: Click on the product number and go directly to the performance curve in Grundfos Product Center.
Port-to-port
length
[mm]
Pump type
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
ALPHA2
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
15-40
15-50
15-60
20-40
20-40
20-45
20-50
20-50
20-60
20-60
25-40
25-40
25-40
25-50
25-50
25-60
25-60
25-60
32-40
32-50
32-60
N
N
N
N
(N)
A
(N)
(N)
A
Voltage
[V]
50 Hz
Connection
130
130
130
130
150
150
130
150
130
150
130
180
180
130
180
130
180
180
180
180
180
Product number
Product number
stainless steel
Data sheet
Page
95047560
98288721
96984037
98288722
G1
11
13
14
11
11
12
13
13
13
14
11
11
11
13
13
14
14
14
11
13
14
98288708
98094952
G 1 1/4
98288723
98290112
98288724
98288709
230
G 1 1/2
G2
95047561
95047562
98288725
98288726
98124072
95047563
95047564
98288728
95047565
98288729
95047566
Product range
ALPHA2 L
98288702
98288705
95047506
Port-to-port length
[mm]
Connection
Voltage
[V]
50 Hz
Product number
Data sheet
Page
130
G 1 1/2
230
95047567
95047568
12
14
ALPHA2 L, Russia
Note: Click on the product number and go directly to the performance curve in Grundfos Product Center.
Pump type
ALPHA2
ALPHA2
ALPHA2
ALPHA2
L
L
L
L
25-40
25-60
32-40
32-60
Port-to-port length
[mm]
Connection
Voltage
[V]
50 Hz
Product number
Data sheet
Page
230
98257789
98286490
98286501
98286503
11
14
11
14
G 1 1/2
180
G2
17
ALPHA2 L
Downloads
Subject to alterations.
18
19
ECM: 1167282
GRUNDFOS A/S
DK-8850 Bjerringbro . Denmark
Telephone: +45 87 50 14 00
www.grundfos.com
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
98505141 0915
Copyright Grundfos Holding A/S