Professional Documents
Culture Documents
EAST1005BA0
Features
Package in 8mm tape on 7diameter reel.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder process.
Mono-color type.
Pb-free.
The product itself will remain within RoHS compliant version.
Compliance with EU REACH.
Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).
Description
The SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density,
reduced storage space and finally smaller equipment to be obtained.
Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Emitted Color
Resin Color
Blue
Water Clear
Symbol
Rating
Unit
Reverse Voltage
VR
Forward Current
IF
25
mA
IFP
100
mA
Power Dissipation
Pd
95
mW
Electrostatic Discharge
ESDHBM
150
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +90
Soldering Temperature
Tsol
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Symbol
Min.
Typ.
Max.
Unit
Iv
28.5
-----
72.0
mcd
21/2
-----
120
-----
deg
-----
468
-----
nm
Condition
IF=5mA
d
464.5
-----
476.5
nm
-----
35
-----
nm
VF
2.7
3.3
3.7
IR
-----
-----
50
VR=5V
Note:
1.Tolerance of Luminous Intensity: 11%
2.Tolerance of Dominant Wavelength 1nm
3. Tolerance of Forward Voltage: 0.05V
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Min.
Max.
N1
28.5
36.0
N2
36.0
45.0
P1
45.0
57.0
P2
57.0
72.0
Unit
Condition
mcd
IF =5mA
Unit
Condition
nm
IF =5mA
Min.
Max.
A9
464.5
467.5
A10
467.5
470.5
A11
470.5
473.5
A12
473.5
476.5
Note:
1.Tolerance of Luminous Intensity: 11%
2.Tolerance of Dominant Wavelength 1nm
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Ta=25C
100
Spectrum Distribution
75
50
25
400
450
500
550
40
30
25
20
10
0
2.6
600
3.8
4.2
Ambient Temperature
Forward Current
100
10
1
-60 -40 -20
4.5
0 20 40 60 80 100
Ta=25C
1000
100
10
1
10
10
10
3.4
50
Ta=25C
20
30
40
40
30
25
1.0
0.9
50
20
0.8
60
10
0
70
0.7
20
40
60
85
100
3.0
Wavelength (nm)
1000
Ta=25C
50
80
90
0.5
0.3
0.1
0.2
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
0.4
0.6
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Package Dimension
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Label Explanation
CPN: Customers Product Number
P/N: Product Number
QTY: Packing Quantity
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates & Dom. Wavelength Rank
REF: Forward Voltage Rank
LOT No: Lot Number
Reel Dimensions
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Label
Desiccant
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
Label
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
A b ov e2 5 5C
3 0 sec.M ax .
3 C /sec.M ax .
6 C /sec.M ax .
P re-h eatin g
A b o ve 2 1 7 C
6 0 ~ 1 5 0sec.
15 0 ~ 2 00 C
6 0 ~ 12 0 sec.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful
because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs
will or will not be damaged by repairing.
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com
DATASHEET
SMD B
EAST1005BA0
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight Americas before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
10
Copyright 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 29-May-2013. Issue No: 1 Rev.1
www.everlightamericas.com