You are on page 1of 712

Cisco Active Network Abstraction 3.7.

2
and 3.7.3 Device Package Third-Party VNE
Reference Guide
Version 3.7.2 and 3.7.3
November 2012

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Text Part Number: OL-24429-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public
domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the
document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
2012 Cisco Systems, Inc. All rights reserved.

CONTENTS
Preface

xiii

Audience

xiii

Conventions

xiii

Related Documentation

xv

Obtaining Documentation, Obtaining Support, and Security Guidelines

CHAPTER

Introduction

1-1

Introduction to VNEs

1-1

Understanding the Tables 1-1


Software Versions 1-2
ANA Versions 1-2
Device Package (DP) Version
Expedite Legend 1-3

1-2

Obtaining Cisco ANA Third-Party VNE Drivers

CHAPTER

1-3

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3


Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2 and 3.7.3
Supported Calix Devices in Cisco ANA Version 3.7.2 and 3.7.3
Supported Huawei Devices in Cisco ANA Version 3.7.2 and 3.7.3

2-5

Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3

2-6

Supported RAD Devices in Cisco ANA Version 3.7.2 and 3.7.3


Supported Tellabs Devices in Cisco ANA Version 3.7.2 and 3.7.3
3

Support Information for Alcatel-Lucent Devices

2-1

2-1

2-3

Supported DragonWave Devices in Cisco ANA Version 3.7.2 and 3.7.3

CHAPTER

xvi

2-3

2-8
2-9

3-1

Alcatel-Lucent ATM Subscriber Access Multiplexer 3-1


Alcatel-Lucent ASAMSupported Software Versions 3-2
Alcatel-Lucent ASAMSupported Topologies 3-2
Alcatel-Lucent ASAMSupported Modules 3-2
Alcatel-Lucent ASAMSupported Technologies 3-5
Alcatel-Lucent ASAMSupported Service Events 3-5
Alcatel-Lucent 7450 Ethernet Service Switch 3-7
Alcatel-Lucent 7450 ESSSupported Software Versions

3-7

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-02

iii

Contents

Alcatel-Lucent 7450 ESSSupported Topologies 3-7


Alcatel-Lucent 7450 ESSSupported Modules 3-7
Alcatel-Lucent 7450 ESSSupported Technologies 3-8
Alcatel-Lucent 7450 ESSSupported Service Events 3-8
Alcatel-Lucent 7705 Service Aggregation Router 3-10
Alcatel-Lucent 7705 SARSupported Software Versions 3-10
Alcatel-Lucent 7705 SARSupported Topologies 3-10
Alcatel-Lucent 7705 SARSupported Modules 3-10
Alcatel-Lucent 7705 SARSupported Technologies 3-11
Alcatel-Lucent 7705 SARSupported Service Events 3-11
Alcatel-Lucent 7750/7710 Service Router 3-12
Alcatel-Lucent 7750/7710 SRSupported Software Versions 3-12
Alcatel-Lucent 7750/7710 SRSupported Topologies 3-12
Alcatel-Lucent 7750/7710 SRSupported Modules 3-12
Alcatel-Lucent 7750/7710 SRSupported Technologies 3-13
Alcatel-Lucent 7750/7710 SRSupported Service Events 3-13
Alcatel-Lucent Intelligent Services Access Manager 3-14
Alcatel-Lucent ISAMSupported Software Versions 3-14
Alcatel-Lucent ISAMSupported Topologies 3-15
Alcatel-Lucent ISAMSupported Modules 3-15
Alcatel-Lucent ISAMSupported Technologies 3-17
Alcatel-Lucent ISAMSupported Service Events 3-18
Supported Technologies on Alcatel-Lucent Devices
IP 3-20
ATM 3-20
SONET/SDH 3-22
TDM/DSx 3-22
xDSL 3-22
Routing Protocols 3-23
Ethernet 3-23
Hardware 3-24
Serial 3-26
MPLS 3-26
Additional Technologies 3-27

CHAPTER

Support Information for Calix Devices

3-19

4-1

Calix Blade 6214 Series DSLAM 4-1


Calix Blade 6214 Series DSLAMSupported Software Versions
Calix Blade 6214 Series DSLAMSupported Modules 4-2

4-1

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

iv

OL-24429-02

Contents

Calix Blade 6214 Series DSLAMSupported Technologies 4-2


Calix Blade 6214 Series DSLAMSupported Service Events 4-3
Calix Blade 6216 Series DSLAM 4-4
Calix Blade 6216 Series DSLAMSupported Software Versions 4-4
Calix Blade 6216 Series DSLAMSupported Modules 4-4
Calix Blade 6216 Series DSLAMSupported Technologies 4-4
Calix Blade 6216 Series DSLAMSupported Service Events 4-5
Calix Blade 6312 Series Switches 4-5
Calix Blade 6312 Series SwitchesSupported Software Versions 4-6
Calix Blade 6312 Series SwitchesSupported Modules 4-6
Calix Blade 6312 Series SwitchesSupported Technologies 4-6
Calix Blade 6312 Series SwitchesSupported Service Events 4-7
Calix Blade 6316 Series Switches 4-7
Calix Blade 6316 Series SwitchesSupported Software Versions 4-8
Calix Blade 6316 Series SwitchesSupported Modules 4-8
Calix Blade 6316 Series SwitchesSupported Technologies 4-8
Calix Blade 6316 Series SwitchesSupported Service Events 4-9
Calix Blade 6450 Series Switches 4-10
Calix Blade 6450 Series SwitchesSupported Software Versions 4-10
Calix Blade 6450 Series SwitchesSupported Modules 4-10
Calix Blade 6450 Series SwitchesSupported Technologies 4-11
Calix Blade 6450 Series SwitchesSupported Service Events 4-12
Supported Technologies on Calix Devices 4-12
IP 4-13
Ethernet (IEEE 802.3) 4-14
ATM 4-14
Point to Point 4-14
DSL 4-15
Hardware 4-15
Base Logical Components 4-16
Common 4-17
Additional Technologies 4-18
Additional Technologies(EPS Info) 4-18
Additional Technologies(EPS State) 4-18
Additional Technologies(Access Prof Info) 4-19
Additional Technologies(Access Profile) 4-19

CHAPTER

Support Information for DragonWave Devices

5-1

DragonWave Horizon Compact Device (Packet Microwave System)

5-1

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-02

Contents

Horizon CompactSupported Software Versions 5-2


Horizon CompactSupported Topologies 5-2
Horizon CompactSupported Modules 5-2
Horizon CompactSupported Technologies 5-2
Horizon CompactSupported Service Events 5-3
DragonWave Horizon Compact Plus Device (Packet Microwave System)
Horizon Compact PlusSupported Software Versions 5-3
Horizon Compact PlusSupported Topologies 5-3
Horizon Compact PlusSupported Modules 5-4
Horizon Compact PlusSupported Technologies 5-4
Horizon Compact PlusSupported Service Events 5-4
DragonWave Horizon Quantum Device (Packet Microwave System)
Horizon QuantumSupported Software Versions 5-5
Horizon QuantumSupported Topologies 5-5
Horizon QuantumSupported Modules 5-5
Horizon QuantumSupported Technologies 5-6
Horizon QuantumSupported Service Events 5-6
Supported Technologies on DragonWave Devices
Ethernet 5-7
Ethernet OAM 5-7
Hardware 5-8
Serial 5-10
Generic Port 5-10
Local Switching 5-11
LLDP 5-12

CHAPTER

Support Information for Huawei Devices

5-3

5-4

5-6

6-1

Huawei - Quidway@ S9300 Series Terabit Routing Switch 6-1


Quidway@S9300 SeriesSupported Software Versions 6-2
Quidway@S9300 SeriesSupported Topologies 6-2
Quidway@S9300 SeriesSupported Modules 6-2
Quidway@S9300 SeriesSupported Technologies 6-3
Quidway@S9300 SeriesSupported Service Events 6-3
Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway 6-3
Quidway@CX600/ATN SeriesSupported Software Versions 6-4
Quidway@CX600/ATN SeriesSupported Topologies 6-4
Quidway@CX600/ATN SeriesSupported Modules 6-4
Quidway@CX600/ATN SeriesSupported Technologies 6-6
Quidway@CX600/ATN SeriesSupported Service Events 6-6
Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

vi

OL-24429-02

Contents

Supported Technologies on Huawei Devices


IP 6-7
Ethernet 6-8
Hardware 6-8
Routing Protocols 6-9
Serial 6-11
LLDP 6-11
VPN (VRF) 6-12

CHAPTER

Support Information for Juniper Devices

6-6

7-1

Juniper E-Series ERX Edge Routing Switches 7-1


Juniper E-SeriesSupported Software Versions 7-2
Juniper E-SeriesSupported Topologies 7-2
Juniper E-SeriesSupported Modules 7-2
Juniper E-SeriesSupported Technologies 7-3
Juniper E-SeriesSupported Service Events 7-3
Juniper JCS Control System 7-4
Juniper JCSSupported Software Versions 7-5
Juniper JCSSupported Topologies 7-5
Juniper JCSSupported Modules 7-5
Juniper JCSSupported Technologies 7-5
Juniper JCSSupported Service Events 7-6
Juniper M-Series Multiservice Edge Routers 7-6
Juniper M-SeriesSupported Software Versions 7-6
Juniper M-SeriesSupported Topologies 7-7
Juniper M-SeriesSupported Modules 7-7
Juniper M-SeriesSupported Technologies 7-11
Juniper M-SeriesSupported Service Events 7-11
Juniper MX-Series Ethernet Service Routers 7-12
Juniper MX-SeriesSupported Software Versions 7-13
Juniper MX-SeriesSupported Topologies 7-13
Juniper MX-SeriesSupported Modules 7-13
Juniper MX-SeriesSupported Technologies 7-14
Juniper MX-SeriesSupported Service Events 7-14
Juniper Netscreen Security Firewall/VPN Device 7-17
Juniper NetScreen Security Firewall/VPN DeviceSupported Software Versions 7-17
Juniper NetScreen Security Firewall/VPN DeviceSupported Topologies 7-18
Juniper NetScreen Security Firewall/VPN DeviceSupported Modules 7-18
Juniper NetScreen Security Firewall/VPN DeviceSupported Technologies 7-18
Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-02

vii

Contents

Juniper NetScreen Security Firewall/VPN DeviceSupported Service Events

7-19

Juniper T-Series Core Platforms 7-19


Juniper T-SeriesSupported Software Versions 7-20
Juniper T-SeriesSupported Topologies 7-20
Juniper T-SeriesSupported Modules 7-20
Juniper T-SeriesSupported Technologies 7-22
Juniper T-SeriesSupported Service Events 7-22
Supported Technologies on Juniper Devices
IP 7-24
Routing Protocols 7-25
Ethernet 7-25
ATM 7-26
Frame Relay 7-27
PPP 7-28
HDLC 7-28
MPLS 7-28
VPN (VRF) 7-30
Hardware 7-31
Serial 7-32
Carrier Ethernet 7-33
BFD 7-34
LLDP 7-34

CHAPTER

Support Information for RAD Devices

7-23

8-1

RAD ACE-3000 Cell-Site Gateway 8-1


RAD ACE CSG-SeriesSupported Software Versions 8-1
RAD ACE CSG-SeriesSupported Topologies 8-2
RAD ACE CSG-SeriesSupported Modules 8-2
RAD ACE CSG-SeriesSupported Technologies 8-2
RAD ACE CSG-SeriesSupported Service Events 8-3
RAD ETX-Series Carrier Ethernet Demarcation Device 8-3
RAD ETX-SeriesSupported Software Versions 8-3
RAD ETX-SeriesSupported Modules 8-3
RAD ETX-SeriesSupported Technologies 8-4
RAD ETX-SeriesSupported Service Events 8-4
RAD IPmux-4L TDM Pseudowire Access Gateway 8-4
RAD IPmux-4LSupported Software Versions 8-5
RAD IPmux-4LSupported Modules 8-5
RAD IPmux-4LSupported Technologies 8-5
Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

viii

OL-24429-02

Contents

RAD IPmux-4LSupported Service Events

8-5

RAD LA-210 EFM DSL Network Termination Unit 8-5


RAD LA-210Supported Software Versions 8-6
RAD LA-210Supported Modules 8-6
RAD LA-210Supported Technologies 8-6
RAD LA-210Supported Service Events 8-6

CHAPTER

Supported Technologies on RAD Devices


IP 8-7
Ethernet (IEEE 802.3ad) 8-8
Ethernet (IEEE 802.3) 8-9
ATM 8-10
DSL 8-11
Physical Technologies 8-11
MPLS 8-12
PWE3 8-13
Hardware 8-13
Serial 8-14
Additional Technologies 8-15

8-7

Support Information for Tellabs Devices

9-1

Tellabs 8840 Multiservice Router 9-1


Tellabs 8840 Multiservice RouterSupported Software Versions 9-1
Tellabs 8840 Multiservice RouterSupported Topologies 9-2
Tellabs 8840 Multiservice RouterSupported Modules 9-2
Tellabs 8840 Multiservice RouterSupported Technologies 9-3
Tellabs 8840 Multiservice RouterSupported Service Events 9-3
Supported Technologies on Tellabs Devices
IP 9-5
Routing Protocols 9-6
Ethernet 9-7
MPLS 9-8
Hardware 9-8
Serial 9-9
ATM 9-10
SONET/SDH 9-11

CHAPTER

10

Traps

9-5

10-1

Alcatel-Lucent ASAM/ISAM V1 Traps

10-3

Alcatel-Lucent ASAM/ISAM V2 Traps

10-4

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-02

ix

Contents

Alcatel-Lucent 7450 ESS V1 Traps

10-5

Alcatel-Lucent 7450 ESS V2 Traps

10-10

Alcatel-Lucent 7705 SAR V2 Traps

10-13

Alcatel-Lucent 7750/7710 SR V1 Traps

10-16

Alcatel-Lucent 7750/7710 SR V2 Traps

10-18

Calix V2 Traps

10-21

DragonWave Horizon Series V2 Traps


Huawei S9300-Series V1 Traps

10-47

Huawei S9300-Series V2 Traps

10-50

10-27

Huawei CX600/ATN Series V1 Traps

10-56

Huawei CX600/ATN Series V2 Traps

10-56

Juniper E-Series V1 Traps

10-56

Juniper E-Series V2 Traps

10-57

Juniper M-Series V1 Traps

10-62

Juniper M-Series V2 Traps

10-77

Juniper MX-Series V1 Traps

10-90

Juniper MX-Series V2 Traps

10-106

Juniper Netscreen V1 Traps

10-120

Juniper Netscreen V2 Traps

10-126

Juniper T-Series V1 Traps

10-132

Juniper T-Series V2 Traps

10-133

Juniper JCS-Series V1 Traps

10-133

Juniper JCS-Series V2 Traps

10-148

RAD ACE V1 Traps

10-161

RAD ETX 204A V1 Traps

10-168

RAD IPmux-4L V1 Traps

10-171

RAD LA-210 V1 Traps

10-172

Tellabs V1 Traps

10-175

Tellabs V2 Traps

10-180

Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters

10-250

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters

10-250

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

10-252

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

10-258

Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters


Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

10-263

10-267

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

OL-24429-02

Contents

Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters


Calix V2 Traps Registry Parameters

10-270

10-274

DragonWave Horizon Series V2 Traps Registry Parameters


Huawei S9300-Series V1 Traps Registry Parameters

10-295

Huawei S9300-Series V2 Traps Registry Parameters

10-299

Huawei CX600/ATN Series V1 Traps Registry Parameters

10-303

Huawei CX600/ATN Series V2 Traps Registry Parameters

10-303

Juniper E-Series V1 Traps Registry Parameters

10-304

Juniper E-Series V2 Traps Registry Parameters

10-304

Juniper M-Series V1 Traps Registry Parameters

10-308

Juniper M-Series V2 Traps Registry Parameters

10-318

Juniper MX-Series V1 Traps Registry Parameters

10-330

Juniper MX-Series V2 Traps Registry Parameters

10-341

Juniper Netscreen V1 Traps Registry Parameters

10-354

Juniper Netscreen V2 Traps Registry Parameters

10-358

Juniper T-Series V1 Traps Registry Parameters

10-361

Juniper T-Series V2 Traps Registry Parameters

10-361

Juniper JCS-Series V1 Traps Registry Parameters

10-362

Juniper JCS-Series V2 Traps Registry Parameters

10-372

RAD ACE V1 Traps Registry Parameters

10-383

RAD ETX 204A V1 Traps Registry Parameters

10-390

RAD IPmux-4L V1 Traps Registry Parameters

10-393

RAD LA-210 V1 Traps Registry Parameters

CHAPTER

11

10-279

10-394

Tellabs V1 Traps Registry Parameters

10-395

Tellabs V2 Traps Registry Parameters

10-399

Syslogs

11-1

Juniper E-Series Syslogs

11-2

Juniper JCS Control System Syslogs


Juniper M-Series Syslogs
Juniper MX-Series Syslogs
Juniper T-Series Syslogs
RAD ACE Syslogs

11-4

11-8
11-12
11-16

11-16

Juniper E-Series Syslogs Registry Parameters

11-16

Juniper JCS Control System Syslogs Registry Parameters


Juniper M-Series Syslogs Registry Parameters

11-18

11-20

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-02

xi

Contents

Juniper MX-Series Syslogs Registry Parameters


Juniper T-Series Syslogs Registry Parameters
RAD ACE Syslogs Registry Parameters

CHAPTER

12

VNE Customization Builder


About the VCB

11-23
11-25

11-25

12-1

12-1

VCB Template Reference 12-2


Juniper Template Reference 12-3
Module Templates 12-3
Event Templates 12-7
Alcatel Template Reference 12-8
Module Templates 12-8
Event Templates 12-14
Huawei Template Reference 12-14
Module Templates 12-14
Event Templates 12-18
Tellabs Template Reference 12-18
Module Templates 12-18
Event Templates 12-20

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

xii

OL-24429-02

Preface
This VNE Reference Guide lists the devices, software versions, topologies, modules, events, and
technologies that are supported on VNEs for third-party devices provided with Cisco Active Network
Abstraction (Cisco ANA) version 3.7.2 and 3.7.3.

Note

This guide contains a subset of the total list of VNEs supported by this version of Cisco ANA. For
information about additional supported VNEs, contact Cisco Professional Services.

Audience
The audience for this document includes:

Network viewers, who monitor the network and perform basic (non-privileged) system functions.

Network operators, who perform day-to-day operations, such as creating business tags and maps,
and controlling alarm life cycles.

Network administrators, who activate services and configure the network.

System administrators, who manage the system configuration and security.

Conventions
This document uses the following conventions:
Table 1

Conventions

Convention

Description

string

A string is a nonquoted set of characters. For example, when setting an SNMP


community string to public, do not use quotation marks around the string, or the
string will include the quotation marks.

^ or Ctrl

^ or Ctrl represents the Control key. For example, the key combination ^D or
Ctrl-D means hold down the Control key while you press the D key. Alphabetic
character keys are indicated in capital letters but are not case sensitive.

<>

Angle brackets show nonprinting characters, such as passwords.

An exclamation point at the beginning of a line indicates a comment line.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

xiii

Preface

Table 1

Conventions (Continued)

Convention

Description

[]

Square brackets show optional elements.

{}

Braces group alternative, mutually exclusive elements that are part of a required
choice.

A vertical bar, also known as a pipe, separates alternative, mutually exclusive


elements of a choice.

boldface font

Button names, commands, keywords, and menu items.

boldface screen

Courier bold shows an example of text that you must enter.

font
italic font

Variables for which you supply values.

italic

screen font Variables you enter.

screen

font

Courier plain shows an example of information displayed on the screen.

Option > Network Choosing a menu item.


Preferences

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

xiv

OL-24429-01

Preface

Related Documentation
Note

We sometimes update the documentation after original publication. Therefore, you should also review
the documentation on Cisco.com for any updates.
The following documentation is available for Cisco Active Network Abstraction 3.7.2:
Cisco Active Network Abstraction 3.7.2 Administrator Guide
Cisco Active Network Abstraction 3.7.2 Customization User Guide
Cisco Active Network Abstraction 3.7.2 Documentation Guide
Cisco Active Network Abstraction 3.7.2 Installation Guide
Cisco Active Network Abstraction 3.7.2 Quick Start Guide
Cisco Active Network Abstraction 3.7.2 Release Notes
Cisco Active Network Abstraction 3.7.2 Reference Guide
Addendum: Additional VNE Driver Support for Cisco ANA 3.7.2
Cisco Active Network Abstraction 3.7.2 Device Package Third-Party VNE Reference Guide
Cisco Active Network Abstraction 3.7.2 Theory of Operations Guide
Cisco Active Network Abstraction 3.7.2 User Guide
Cisco Active Network Abstraction 3.7.2 Configuration and Image Management User and Administrator
Guide
Cisco Active Network Abstraction Network Service Activation 1.2 User Guide
Cisco Active Network Abstraction Network Service Activation 1.2 Customization Guide
Open Source Used in Cisco Active Network Abstraction 3.7.2
Cisco Active Network Abstraction Third-Party VNE Device Package Installation Guides. There are
separate DP installation guides for Cisco ANA 3.7.3 and Cisco ANA 3.7.2.
Cisco Active Network Abstraction 3.7.2 Integration Developer Guide is available on the Cisco ANA
Technology Center website. This guide describes how to use Cisco ANA integration interfaces.
The Cisco ANA Technology Center is an online resource for additional downloadable Cisco ANA
support content, including help for integration developers who use Cisco ANA application programming
interfaces (APIs). It provides information, guidance, and examples to help you integrate your
applications with Cisco ANA. It also provides a platform for you to interact with subject matter experts.
To view the information on the Cisco ANA Technology Center website, you must have a Cisco.com
account with partner level access, or you must be a Cisco ANA licensee. You can access the Cisco ANA
Technology Center at http://developer.cisco.com/web/ana/home.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

xv

Preface

Obtaining Documentation, Obtaining Support, and Security


Guidelines
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly Whats New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the Whats New in Cisco Product Documentation as an RSS feed and set content to be
delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently
supports RSS Version 2.0.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

xvi

OL-24429-01

CH A P T E R

Introduction
This chapter introduces Virtual Network Elements (VNEs) and describes the types of information
available in this guide.
This chapter contains the following topics:

Introduction to VNEs, page 1-1

Understanding the Tables, page 1-1

Obtaining Cisco ANA Third-Party VNE Drivers, page 1-3

Introduction to VNEs
VNEs (Virtual Network Elements) are independent software processes that run on the Cisco ANA Unit
Servers. Each VNE is assigned to manage a single network element (NE) using the NEs management
interfaces (for example, SNMP and/or Telnet). The VNEs maintain a live model, or abstraction, of each
NE and the entire network.
As the VNE loads, it starts investigating the NE and automatically builds a live model of the NE,
including its physical and logical inventory, its configuration, and its status. After modeling the NE, the
VNE begins negotiating with peer VNEs, which represent the peer NEs, in order to determine NE
connectivity and topology at different layers. This model of the network topology, NE state, and NE
inventory is constantly being updated by the VNEs, which track every change that occurs in the NEs and
the network.
The VNEs communicate between themselves to analyze end-to-end flows, which provide information
for root-cause and impact analysis, service path tracing, and more.

Understanding the Tables


This section describes key information that can be found in the VNE support information chapters in this
guide.
This section contains the following topics:

Software Versions, page 1-2

ANA Versions, page 1-2

Device Package (DP) Version, page 1-2

Expedite Legend, page 1-3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

1-1

Chapter 1

Introduction

Understanding the Tables

Software Versions
The Software Version column in the tables in this guide identifies the third-party NE software versions
that are compatible with Cisco ANA and that can be running on the third-party NEs that Cisco ANA
supports.
When an NE software release is not explicitly supported, Cisco ANA attempts to model the NE using
the default version for that device series. The default version is a device-specific fallback set of
commands and MIB instrumentation that allows Cisco ANA to discover and query for basic device
properties, including:

Managed element information.

Basic physical inventory.

Logical Inventory (including the Routing Table, ARP, BGP and OSPF information). Modelling of
other technologies is done on a best-effort basis.

The default version does not correspond to any specific supported NE software version. Building of the
physical model and its containment structure depends on the instrumentation (MIB and CLI commands)
used by the default version. The default version may show you different containment structures (modules
and cards) from what you will see for an explicitly supported NE software version. You can discover
whether the default version is being used for a particular VNE by looking in the AVM log located in
install directory/main/logs (search for default version).
If you have additional questions, contact Cisco Professional Services or your Cisco Sales
Representative.

ANA Versions
The ANA Version column found in the tables in this guide lists the version of Cisco ANA that supports
the NE.

Device Package (DP) Version


The DP Version column found in the tables in this guide lists the version of DP during which a VNE
supporting the specified NE module, software, topology, or other feature was first introduced. It is
therefore the earliest DP version that supports that NE. All later versions of DP also support the NE. For
example: If the guide indicates that Juniper M-Series devices are supported on DP 1.0, they are also
supported on DP 2.0, 3.0, and so on.
The latest DP is cumulative of previous DP releases and the latest DP contains greatest of the VNE
drivers update until that particular date.

Note

All DP versions of Cisco ANA 3.7.2 are compatible with Cisco ANA 3.7.3.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

1-2

OL-24429-01

Chapter 1

Introduction
Obtaining Cisco ANA Third-Party VNE Drivers

Expedite Legend
Table 1-1 describes the meaning of the Expedite column found in the service event (service alarm) tables
in this guide.
Table 1-1

Expedite Legend in Service Event Tables

Value

Descriptions

The service event is expedited by a syslog or trap generated


by the device. This means that the syslog or trap causes the
VNE to poll the device without waiting for the usual
polling cycle, thus enabling quicker detection of the event.

The service event is not expedited.This means that the VNE


will poll this device during the next regularly scheduled
polling cycle.

Obtaining Cisco ANA Third-Party VNE Drivers


To obtain Cisco ANA 3.7.2 Third-Party DP tar file or Cisco ANA 3.7.3 Third-Party DP tar file for
installation, contact a Cisco representative or download from Cisco ANA Software Download site on
Cisco.com.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

1-3

Chapter 1

Introduction

Obtaining Cisco ANA Third-Party VNE Drivers

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

1-4

OL-24429-01

CH A P T E R

OverviewSupported Network Elements in


Cisco ANA Version 3.7.2 and 3.7.3
This chapter provides an overview of network elements (NEs) that are supported by
Cisco ANA Version 3.7.2 and 3.7.3:
This chapter contains the following topics:

Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-1

Supported Calix Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-3

Supported DragonWave Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-3

Supported Huawei Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-5

Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-6

Supported RAD Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-8

Supported Tellabs Devices in Cisco ANA Version 3.7.2 and 3.7.3, page 2-9

Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2


and 3.7.3
This document includes support information for the following Alcatel-Lucent devices:

Alcatel-Lucent ATM Subscriber Access Multiplexer

Alcatel-Lucent 7450 Ethernet Service Switch

Alcatel-Lucent 7705 Service Aggregation Router

Alcatel-Lucent 7750/7710 Service Router

Alcatel-Lucent Intelligent Services Access Manager

Table 2-1

NE Type

Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2 and 3.7.3

Product Name

SysOID

ANA
Version

DP
Version

3.7.2/3.7.
3

6.0

Alcatel-Lucent ATM Subscriber Access Multiplexer

asam 7301 HD Alcatel ASAM 7301 HD


DSLAM

1.3.6.1.4.1.637.61.1

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

2-1

Chapter 2
Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2 and 3.7.3

Table 2-1

NE Type

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3

Supported Alcatel-Lucent Devices in Cisco ANA Version 3.7.2 and 3.7.3 (Continued)

Product Name

SysOID

ANA
Version

DP
Version

3.7.2/3.7.
3

6.0

3.7.2/3.7.
3

6.0

asam 7301 SD Alcatel ASAM 7301 SD


DSLAM

1.3.6.1.4.1.637.61.1

asam 7301 UD Alcatel ASAM 7301 UD


DSLAM

1.3.6.1.4.1.637.61.1

asam 7301 XD Alcatel ASAM 7301 XD


DSLAM

1.3.6.1.4.1.637.61.1

3.7.2/3.7.
3

6.0

Alcatel-Lucent 7450 Ethernet Service Switch

ess-7450-1

Alcatel ESS-7450-1

1.3.6.1.4.1.6527.1.6.1

3.7.2

1.0

ess-7450-7

Alcatel ESS-7450-7

1.3.6.1.4.1.6527.1.6.3

3.7.2

1.0

ess-7450-12

Alcatel ESS-7450-12

1.3.6.1.4.1.6527.1.6.4

3.7.2

3.0

ess-7450-6

Alcatel ESS-7450-6

1.3.6.1.4.1.6527.1.3.5

3.7.2/3.7.
3

4.0

Alcatel-Lucent 7705 Service Aggregation Router

Alcatel 7705
SAR-F

Alcatel 7705 Service


1.3.6.1.4.1.6527.6.1.1.2.2
Aggregation Router (Fixed)

3.7.2

3.0

Alcatel 7705
SAR-8

Alcatel 7705 Service


Aggregation Router (8
slots)

1.3.6.1.4.1.6527.6.1.1.2.1

3.7.2

3.0

Alcatel-Lucent 7750/7710 Service Router

Alcatel 7750
SR c-12

Alcatel 7750 superior


multiservice edge router

1.3.6.1.4.1.6527.1.3.6

3.7.2

3.0

Alcatel 7750
SR 7

Alcatel 7750 superior


multiservice edge router

1.3.6.1.4.1.6527.1.3.4

3.7.2

3.0

Alcatel 7750
SR 4

Alcatel 7750 superior


multiservice edge router

1.3.6.1.4.1.6527.1.3.2

3.7.2/3.7.
3

4.0

Alcatel 7710
SR c-12

Alcatel 7710 superior


multiservice edge router

1.3.6.1.4.1.6527.1.9.1

3.7.2/3.7.
3

4.0

Alcatel 7750
SR 12

Alcatel 7750 superior


multiservice edge router

1.3.6.1.4.1.6527.1.3.3

3.7.2/3.7.
3

5.0

Alcatel-Lucent Intelligent Services Access Manager

ISAM 7302

Alcatel-Lucent 7302 ISAM 1.3.6.1.4.1.637.61.1

3.7.2/3.7.
3

6.0

ISAM 7330

Alcatel-Lucent 7330 ISAM 1.3.6.1.4.1.637.61.1

3.7.2/3.7.
3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

2-2

OL-24429-01

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3


Supported Calix Devices in Cisco ANA Version 3.7.2 and 3.7.3

Supported Calix Devices in Cisco ANA Version 3.7.2 and 3.7.3


This document includes support information for the following Calix devices:

Calix Blade 6214 Series DSLAM

Calix Blade 6216 Series DSLAM

Calix Blade 6312 Series Switches

Calix Blade 6316 Series Switches

Calix Blade 6450 Series Switches

Table 2-2

Supported Calix Devices in Cisco ANA Version 3.7.2 and 3.7.3

NE Type

Product Name

ANA
Version

DP
Version

1.3.6.1.4.1.6066.1.38

3.7.2/3.7.
3

9.0

1.3.6.1.4.1.6066.1.51

3.7.2/3.7.
3

9.0

1.3.6.1.4.1.6066.1.37

3.7.2/3.7.
3

9.0

1.3.6.1.4.1.6066.1.50

3.7.2/3.7.
3

9.0

1.3.6.1.4.1.6066.1.44

3.7.2/3.7.
3

9.0

SysOID

Calix Blade 6214 Series DSLAM

B6214

Calix B6-214

Calix Blade 6216 Series DSLAM

BLC 6216

Calix B6-216

Calix Blade 6312 Series Switches

BLC 6312

Calix B6-312

Calix Blade 6316 Series Switches

BLC 6316

Calix B6-316

Calix Blade 6450 Series Switches

BLC 6450

Calix B6-450

Supported DragonWave Devices in Cisco ANA Version 3.7.2 and


3.7.3
This document includes support information for the following DragonWave devices:

DragonWave Horizon Compact Device (Packet Microwave System)

DragonWave Horizon Compact Plus Device (Packet Microwave System)

DragonWave Horizon Quantum Device (Packet Microwave System)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

2-3

Chapter 2
Supported DragonWave Devices in Cisco ANA Version 3.7.2 and 3.7.3

Table 2-3

NE Type

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3

Supported DragonWave Devices in Cisco ANA Version 3.7.2 and 3.7.3

Product Name

SysOID

ANA
Version

DP
Version

3.7.2/3.
7.3

5.0

3.7.2/3.
7.3

8.0

3.7.2/3.
7.3

5.0

DragonWave Horizon Compact Device (Packet Microwave System)

Horizon
Compact

Horizon Compact

1.3.6.1.4.1.7262.2.2

DragonWave Horizon Compact Plus Device (Packet Microwave System)

Horizon
Compact Plus

Horizon Compact Plus

1.3.6.1.4.1.7262.2.5

DragonWave Horizon Quantum Device (Packet Microwave System)

Horizon
Quantum

Horizon Quantum

1.3.6.1.4.1.7262.2.4

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

2-4

OL-24429-01

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3


Supported Huawei Devices in Cisco ANA Version 3.7.2 and 3.7.3

Supported Huawei Devices in Cisco ANA Version 3.7.2 and 3.7.3


This document includes support information for the following Huawei devices:

Huawei - Quidway@ S9300 Series Terabit Routing Switch

Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway

Table 2-4

Supported Huawei Devices in Cisco ANA Version 3.7.2 and 3.7.3

NE Type

Product Name

SysOID

ANA
Version

DP
Version

1.3.6.1.4.1.2011.2.170.2

3.7.2

3.0

Huawei - Quidway@ S9300 Series Terabit Routing Switch

Huawei S9306

Huawei S9306 Terabit Routing


Switch

Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway

Huawei CX600 - Huawei CX600-X8 Carrier


X8
Switch

1.3.6.1.4.1.2011.2.87.18

3.7.2/3. 5.0
7.3

Huawei CX600 - Huawei CX600-X2 Carrier


X2
Switch

1.3.6.1.4.1.2011.2.87.21

3.7.2/3. 5.0
7.3

Huawei CX600 - Huawei CX600-X1 Carrier


X1
Switch

1.3.6.1.4.1.2011.2.87.20

3.7.2/3. 5.0
7.3

Huawei ATN
910

Huawei ATN 910

1.3.6.1.4.1.2011.2.220.3

3.7.2/3.
7.3

5.0

Huawei ATN
950

Huawei ATN 950

1.3.6.1.4.1.2011.2.220.4

3.7.2/3.
7.3

5.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

2-5

Chapter 2
Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3

Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3


This document includes support information for the following Juniper devices:

Juniper E-Series ERX Edge Routing Switches

Juniper JCS Control System

Juniper M-Series Multiservice Edge Routers

Juniper MX-Series Ethernet Service Routers

Juniper Netscreen Security Firewall/VPN Device

Juniper T-Series Core Platforms

Table 2-5

NE Type

Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3

Product Name

SysOID

ANA
Version

DP
Version

Juniper E-Series ERX Edge Routing Switches

Juniper-1400

ERX-1400

1.3.6.1.4.1.4874.1.1.1.1.1

3.7.2

3.0

Juniper-1440

ERX-1440

1.3.6.1.4.1.4874.1.1.1.1.3

3.7.2

3.0

Juniper JCS Control System

Juniper JCS
1200

Juniper Networks JCS 1200


Control System

1.3.6.1.4.1.2636.1.1.1.2.38 3.7.2/3.
7.3

6.0

Juniper M-Series Multiservice Edge Routers

Juniper M10i

Juniper Networks M10i


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.11 3.7.2/3.
7.3

1.0

Juniper M7i

Juniper Networks M7i


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.10 3.7.2/3.
7.3

6.0

Juniper M320

Juniper Networks M320


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.9

3.7.2/3.
7.3

1.0

Juniper M20

Juniper Networks M20


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.2

3.7.2/3.
7.3

4.0

Juniper M120

Juniper Networks M120


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.18 3.7.2/3.
7.3

4.0

Juniper M40e

Juniper Networks M40e


Multiservice Edge Router

1.3.6.1.4.1.2636.1.1.1.2.8

4.0

3.7.2/3.
7.3

Juniper MX-Series Ethernet Service Routers

Juniper MX960

Juniper Networks MX960


Ethernet Service Router

1.3.6.1.4.1.2636.1.1.1.2.21 3.7.2

2.0

Juniper MX480

Juniper Networks MX480


Ethernet Service Router

1.3.6.1.4.1.2636.1.1.1.2.25 3.7.2

3.0

Juniper MX240

Juniper Networks MX240


Ethernet Service Router

1.3.6.1.4.1.2636.1.1.1.2.29 3.7.2/3.
7.3

4.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

2-6

OL-24429-01

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3


Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3

Table 2-5

Supported Juniper Devices in Cisco ANA Version 3.7.2 and 3.7.3 (Continued)

NE Type

Product Name

SysOID

ANA
Version

DP
Version

3.7.2/3.
7.3

6.0

Juniper Netscreen Security Firewall/VPN Device

Juniper
Netscreen 5400

Juniper Netscreen 5400 Security 1.3.6.1.4.1.3224.1.13


Firewall/VPN device

Juniper T-Series Core Platforms

Juniper T640

T640

1.3.6.1.4.1.2636.1.1.1.2.6

3.7.2

1.0

Juniper T320

T320

1.3.6.1.4.1.2636.1.1.1.2.7

3.7.2

3.0

Juniper T1600

T1600

1.3.6.1.4.1.2636.1.1.1.2.27 3.7.2/3.
7.3

4.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

2-7

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3

Supported RAD Devices in Cisco ANA Version 3.7.2 and 3.7.3

Supported RAD Devices in Cisco ANA Version 3.7.2 and 3.7.3


This document includes support information for the following RAD device:

RAD ACE-3000 Cell-Site Gateway

RAD ETX-Series Carrier Ethernet Demarcation Device

RAD IPmux-4L TDM Pseudowire Access Gateway

RAD LA-210 EFM DSL Network Termination Unit

Table 2-6

Supported RAD Devices in Cisco ANA Version 3.7.2 and 3.7.3

NE Type

Product Name

SysOID

ANA
Version

DP
Version

RAD ACE-3000 Cell-Site Gateway

ACE-3105

Rad Ace 3105

1.3.6.1.4.1.164.6.1.12.3.18 3.7.2

2.0

ACE-3100

Rad Ace 3100

1.3.6.1.4.1.164.6.1.12.3.9

3.7.2/3.7.
3

4.0

ACE-3200

Rad Ace 3200

1.3.6.1.4.1.164.6.1.12.3.8

3.7.2/3.7.
3

4.0

ACE-3205

Rad Ace 3205

1.3.6.1.4.1.164.6.1.12.3.17 3.7.2

1.0

1.3.6.1.4.1.164.6.1.6.25

3.7.2

2.0

3.7.2/3.7.
3

4.0

1.3.6.1.4.1.164.6.1.3.156

3.7.2

2.0

1.3.6.1.4.1.164.6.1.13.5

3.7.2

2.0

RAD ETX-Series Carrier Ethernet Demarcation Device

ETX-204AW
(Wide Box)

Rad ETX 204AW (Wide


Box)

ETX-204
A(Short Box)

Rad ETX 204 A (Short Box) 1.3.6.1.4.1.164.6.1.6.24

RAD IPmux-4L TDM Pseudowire Access Gateway

IPmux-4L

Rad Ipmux 4L

RAD LA-210 EFM DSL Network Termination Unit

LA-210

Rad LA 210

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

2-8

OL-24429-01

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3


Supported Tellabs Devices in Cisco ANA Version 3.7.2 and 3.7.3

Supported Tellabs Devices in Cisco ANA Version 3.7.2 and 3.7.3


This document includes support information for the following Tellabs device:

Tellabs 8840 Multiservice Router, page 2-9

Table 2-7

Supported Tellabs Devices in Cisco ANA Version 3.7.2

NE Type

Product Name

SysOID

ANA
Version

DP
Version

3.7.2/3.7.
3

6.0

Tellabs 8840 Multiservice Router

TellabsMSE8
840

TellabsMSE8840

1.3.6.1.4.1.4641.1.3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

2-9

Chapter 2

OverviewSupported Network Elements in Cisco ANA Version 3.7.2 and 3.7.3

Supported Tellabs Devices in Cisco ANA Version 3.7.2 and 3.7.3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

2-10

OL-24429-01

CH A P T E R

Support Information for Alcatel-Lucent Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
Alcatel-Lucent devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects
and attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference
Guide.
This chapter contains the following topics:

Alcatel-Lucent ATM Subscriber Access Multiplexer, page 3-1

Alcatel-Lucent 7450 Ethernet Service Switch, page 3-7

Alcatel-Lucent 7705 Service Aggregation Router, page 3-10

Alcatel-Lucent 7750/7710 Service Router, page 3-12

Alcatel-Lucent Intelligent Services Access Manager, page 3-14

Supported Technologies on Alcatel-Lucent Devices, page 3-19

Alcatel-Lucent ATM Subscriber Access Multiplexer


This section includes the following information about Alcatel-Lucent ASAM devices (for information
on the NE types supported in Cisco ANA Version 3.7.2/3.7.3, see Alcatel-Lucent ATM Subscriber
Access Multiplexer):
This section contains the following topics:

Note

Alcatel-Lucent ASAMSupported Software Versions, page 3-2

Alcatel-Lucent ASAMSupported Topologies, page 3-2

Alcatel-Lucent ASAMSupported Modules, page 3-2

Alcatel-Lucent ASAMSupported Technologies, page 3-5

Alcatel-Lucent ASAMSupported Service Events, page 3-5

Alcatel ATM Subscriber Access Multiplexer device was already supported in the ANA version prior to
3.7.2.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-1

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent ATM Subscriber Access Multiplexer

Alcatel-Lucent ASAMSupported Software Versions


Table 3-1

Supported Software Versions for Alcatel-Lucent


ASAMCisco ANA Version 3.7.2/3.7.3

Software Version

ANA Version

DP Version

2.0.0.16

3.7.2/3.7.3

6.0

2.3.1.15

3.7.2/3.7.3

6.0

2.4.2.4

3.7.2/3.7.3

6.0

3.1.0

3.7.2/3.7.3

6.0

4.1.3.0

3.7.2/3.7.3

6.0

4.1.5.6

3.7.2/3.7.3

6.0

4.2.0.6

3.7.2/3.7.3

6.0

4.2.1.0

3.7.2/3.7.3

6.0

4.6.0.6

3.7.2/3.7.3

6.0

5.0.1.2

3.7.2/3.7.3

6.0

5.0.1.3

3.7.2/3.7.3

6.0

5.1.0.10

3.7.2/3.7.3

6.0

5.1.0.21

3.7.2/3.7.3

6.0

Alcatel-Lucent ASAMSupported Topologies


Table 3-2

Supported Topologies for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Version

ATM

3.7.2/3.7.
3

6.0

Ethernet

Ethernet

3.7.2/3.7.
3

6.0

PPP/HDLC

PPP or HDLC

3.7.2/3.7.
3

6.0

Topology Type

Link Type

ATM

Alcatel-Lucent ASAMSupported Modules


Table 3-3

Module Name
AACU-A

Supported Modules for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

Module Description

DP Version

3.7.2/3.7.
3

ADSL Alarm Control Unit version A (R3


equipment)

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-2

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent ATM Subscriber Access Multiplexer

Table 3-3

Supported Modules for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

Module Name

ANA
Version

Module Description

DP Version

AACU-B

3.7.2/3.7.
3

ADSL Alarm Control Unit version B

6.0

AACU-C

3.7.2/3.7.
3

ADSL Alarm Control Unit version C (R4


equipment)

6.0

ABLT-D

3.7.2/3.7.
3

MultiDSL POTS UD BVB LT standard version D 6.0

ABLT-E

3.7.2/3.7.
3

Multi-DSL POTS Line Termination version E

6.0

ADLT-C

3.7.2/3.7.
3

ADSL Line termination version C (4 lines)

6.0

ADLT-E

3.7.2/3.7.
3

ADSL Line termination version E (4 lines)

6.0

ADLT-F

3.7.2/3.7.
3

ADSL (Euro) Line termination version F (ISDN


support, 4 lines)

6.0

ADLT-J

3.7.2/3.7.
3

ADSL Line termination version J (12 lines)

6.0

ADLT-K

3.7.2/3.7.
3

ADSL Line termination version K (12 lines)

6.0

ADLT-L

3.7.2/3.7.
3

ADSL Line termination version L (24 lines)

6.0

ADLT-M

3.7.2/3.7.
3

ADSL Line termination version M (12 lines)

6.0

ADLT-S

3.7.2/3.7.
3

ADSL Line Termination version S - BVB enabled 6.0

ADLT-W

3.7.2/3.7.
3

ADSL Line Termination version W - POTS/BVB


ready

6.0

ADSE-A

3.7.2/3.7.
3

ADSL Serial Extender version A

6.0

ADSE-B

3.7.2/3.7.
3

ADSL Serial Extender version B

6.0

ADSE-C

3.7.2/3.7.
3

ADSL Serial Extender version C

6.0

AICC-A

3.7.2/3.7.
3

IMA ATM E1-NT 2 Mits Controller Card

6.0

ASCC-P

3.7.2/3.7.
3

PDH Interface Controller Card

6.0

ASCC-PE

3.7.2/3.7.
3

PDH E3 Interface Controller Card

6.0

ASCC-S1

3.7.2/3.7.
3

STM-1 Interface Controller Card

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-3

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent ATM Subscriber Access Multiplexer

Table 3-3

Module Name

Supported Modules for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

Module Description

DP Version

ASPS-A

3.7.2/3.7.
3

ADSL Splitter Subrack version A

6.0

BSEC-A

3.7.2/3.7.
3

Broad Band Shelf Extender Card

6.0

D1LT-A

3.7.2/3.7.
3

DS1 Line termination version A

6.0

D1LT-B

3.7.2/3.7.
3

4 T1 ports Using IMA Group

6.0

D3LT-A

3.7.2/3.7.
3

DS3 Line termination version A

6.0

D3NT-A

3.7.2/3.7.
3

DS3 Network Termination version A

6.0

D3NT-C

3.7.2/3.7.
3

DS3 Network Termination version C

6.0

E1LT-A

3.7.2/3.7.
3

E1 (IMA) Line Termination version A (4 lines)

6.0

E1NT-A

3.7.2/3.7.
3

(Quad) E1 (IMA) Network Termination version A 6.0

E1NT-C

3.7.2/3.7.
3

GANT-B motherboard and E1PL-B daughterboard 6.0


(PLIM)

EBLT-A

3.7.2/3.7.
3

ADSL2+ POTS Line Termination version A

6.0

EBLT-C

3.7.2/3.7.
3

ADSL2+ POTS Line Termination version C

6.0

ECNT-A

3.7.2/3.7.
3

7302 ISAM Combined network termination


version A

6.0

LTAC-C

3.7.2/3.7.
3

Line Terminal ADSL Combiner Card

6.0

LTAC-D

3.7.2/3.7.
3

Line Terminal ADSL Combiner Card

6.0

LTSC-A

3.7.2/3.7.
3

Line Termination SHDSL Card

6.0

MACU-A

3.7.2/3.7.
3

MiniRAM ACU version A

6.0

NBLC-A

3.7.2/3.7.
3

Narrowband Line Card

6.0

SALT-A

3.7.2/3.7.
3

1 Port OC3 Card

6.0

SALT-C

3.7.2/3.7.
3

STM-1/OC3c (HCL based) Line Termination Unit 6.0


version C

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-4

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent ATM Subscriber Access Multiplexer

Table 3-3

Supported Modules for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

Module Description

SANT-D

3.7.2/3.7.
3

Synchronous (STM1) ATM Network Termination 6.0


version D

SANT-E

3.7.2/3.7.
3

GANT-A motherboard and SONI-A


daughterboard (PLIM)

6.0

SANT-F

3.7.2/3.7.
3

GANT-B motherboard and SONI-A


daughterboard (PLIM)

6.0

SANT-G

3.7.2/3.7.
3

Synchronous (STM1) ATM Network Termination 6.0


version G

SHLT-B

3.7.2/3.7.
3

SHDSL Line termination versoion B (12 lines)

SMLT-A

3.7.2/3.7.
3

SHDSL Line termination version A (24 lines with 6.0


IMA)

SMLT-B

3.7.2/3.7.
3

SHDSL Line Termination Unit Version B(12 lines, 6.0


with IMA)

IPGW-A

3.7.2/3.7.
3

IP Service Gateway

6.0

RPSP-A

3.7.2/3.7.
3

Packet Subscriber profile version A

6.0

Module Name

DP Version

6.0

Alcatel-Lucent ASAMSupported Technologies


The following technologies are supported by the Alcatel-Lucent ASAM in
Cisco ANA Version 3.7.2/3.7.3:

IP, page 3-20

ATM, page 3-20

SONET/SDH, page 3-22

xDSL, page 3-22

Ethernet, page 3-23

Hardware, page 3-24

Serial, page 3-26

Alcatel-Lucent ASAMSupported Service Events


Table 3-4

Supported Service Events for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

Event Name
Active IP Interfaces Found

ANA
Version

DP
Expedited Version

3.7.2/3.7.
3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-5

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent ATM Subscriber Access Multiplexer

Table 3-4

Supported Service Events for Alcatel-Lucent ASAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Expedited Version

All IP Interfaces Down

3.7.2/3.7.
3

6.0

BGP Neighbor Down

3.7.2/3.7.
3

6.0

Card Down

3.7.2/3.7.
3

6.0

Card In

3.7.2/3.7.
3

6.0

Card Out

3.7.2/3.7.
3

6.0

Card Up

3.7.2/3.7.
3

6.0

Device Unreachable

3.7.2/3.7.
3

6.0

Device Unsupported

3.7.2/3.7.
3

6.0

Interface status down flapping

3.7.2/3.7.
3

6.0

Interface status down flapping update 3.7.2/3.7.


3

6.0

Link Down

3.7.2/3.7.
3

6.0

Link up

3.7.2/3.7.
3

6.0

Port Down

3.7.2/3.7.
3

6.0

Port Flapping

3.7.2/3.7.
3

6.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-6

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent 7450 Ethernet Service Switch

Alcatel-Lucent 7450 Ethernet Service Switch


This section includes the following information about Alcatel-Lucent 7450 ESS devices (for information
on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Alcatel-Lucent 7450 Ethernet
Service Switch):
This section contains the following topics:

Alcatel-Lucent 7450 ESSSupported Software Versions, page 3-7

Alcatel-Lucent 7450 ESSSupported Topologies, page 3-7

Alcatel-Lucent 7450 ESSSupported Modules, page 3-7

Alcatel-Lucent 7450 ESSSupported Technologies, page 3-8

Alcatel-Lucent 7450 ESSSupported Service Events, page 3-8

Alcatel-Lucent 7450 ESSSupported Software Versions


Table 3-5

Supported Software Versions for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2
and 3.7.3

Software Version

ANA Version

DP Version

3.0.R1

3.7.2

1.0

3.0.R7

3.7.2

1.0

4.0.R5

3.7.2

1.0

5.0.R7

3.7.2

3.0

Alcatel-Lucent 7450 ESSSupported Topologies


Table 3-6

Supported Topologies for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2 and
3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

1.0

Alcatel-Lucent 7450 ESSSupported Modules


Table 3-7

Supported Modules for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

M10-1GB-SFP

3.7.2

MDA 10 Ports 1-Gigabit Ethernet SFP

1.0

M16-OC12/3-SFP

3.7.2

MDA 16 Ports OC12/OC3 SFP

1.0

M8-OC12/3-SFP

3.7.2

MDA 8 Ports OC12/OC3 SFP

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-7

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent 7450 Ethernet Service Switch

Table 3-7

Supported Modules for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

M16-OC3-SFP

3.7.2

MDA 16 Ports OC3 SFP

1.0

M4-OC48-SFP

3.7.2

MDA 4 Ports OC48 SFP

1.0

M1-10GB

3.7.2

MDA 1 Port 10 GigabitP

1.0

M2-OC48-SFP

3.7.2

MDA 2 Ports OC48 SFP

1.0

20-100ETH-SFP

3.7.2

MDA 20 Port 100FX

1.0

M20-1GB-TX

3.7.2

MDA 20 Ports 10/100/1000 Ethernet TX 1.0

M2-10GB-XFP

3.7.2

MDA 2 Ports 10Gig Ethernet XFP

M20-1GB-SFP

3.7.2

MDA 20 Ports 10/100/1000 Ethernet SFP 1.0

VSM-CCA

3.7.2

VSM Cross Connect

1.0

M5-1GB-SFP-B

3.7.2

MDA 5 Ports 10/100/1000 Ethernet SFP

1.0

M10-1GB-SFP-B

3.7.2

MDA 10 Ports 10/100/1000 Ethernet SFP 1.0

SFM-200G

3.7.2

200g CPM/SF module

1.0

SFM-100G

3.7.2

100g CPM/SF module

1.0

SFM2-200G

3.7.2

200g CPM/SF module

1.0

IOM-20G

3.7.2

2 x 10-Gig MDA IOM Card

1.0

M60-10/100ETH-TX

3.7.2

MDA 60 Ports 10/100 Ethernet TX

1.0

M60-10/100ET-TX

3.7.2

MDA 60 Ports 10/100 Ethernet TX

1.0

IOM-20G-B

3.7.2

2 x 10-Gig MDA IOM Card, B

1.0

SFM2-400G

3.7.2

400g CPM/SF module

3.0

1.0

Alcatel-Lucent 7450 ESSSupported Technologies


The following technologies are supported by the Alcatel-Lucent 7450 ESS in Cisco ANA Version 3.7.2
and 3.7.3:

IP, page 3-20

Ethernet, page 3-23

Hardware, page 3-24

Serial, page 3-26

Alcatel-Lucent 7450 ESSSupported Service Events


Supported Service Events for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-8

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent 7450 Ethernet Service Switch

Supported Service Events for Alcatel-Lucent 7450 ESSCisco ANA Version 3.7.2 and 3.7.3 (Continued)

Event Name

ANA
Version

DP
Expedited Version

All IP Interfaces Down

3.7.2

1.0

BGP Neighbor Down

3.7.2

1.0

Card Down

3.7.2

1.0

Card In

3.7.2

1.0

Card Out

3.7.2

1.0

Card Up

3.7.2

1.0

Device Unreachable

3.7.2

1.0

Device Unsupported

3.7.2

1.0

Interface status down flapping

3.7.2

1.0

Interface status down flapping


update

3.7.2

1.0

Link Down

3.7.2

1.0

Link up

3.7.2

1.0

Port Down

3.7.2

1.0

Port Flapping

3.7.2

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-9

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent 7705 Service Aggregation Router

Alcatel-Lucent 7705 Service Aggregation Router


This section includes the following information about Alcatel-Lucent 7705 SAR devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Alcatel-Lucent
7705 Service Aggregation Router):
This section contains the following topics:

Alcatel-Lucent 7705 SARSupported Software Versions, page 3-10

Alcatel-Lucent 7705 SARSupported Topologies, page 3-10

Alcatel-Lucent 7705 SARSupported Modules, page 3-10

Alcatel-Lucent 7705 SARSupported Technologies, page 3-11

Alcatel-Lucent 7705 SARSupported Service Events, page 3-11

Alcatel-Lucent 7705 SARSupported Software Versions


Table 3-8

Supported Software Versions for Alcatel-Lucent 7705 SARCisco ANA Version 3.7.2
and 3.7.3

Software Version

ANA Version

DP Version

TiMOS-B-3.0.R1

3.7.2

3.0

Alcatel-Lucent 7705 SARSupported Topologies


Table 3-9

Supported Topologies for Alcatel-Lucent 7705 SARCisco ANA Version 3.7.2 and
3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

3.0

Alcatel-Lucent 7705 SARSupported Modules


Table 3-10

Supported Modules for Alcatel-Lucent 7705 SARCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

A16-CHDS1V2

Module Description

DP Version

3.7.2

MDA 16 Port Any Service Channelized


DS1/E1, Multi-Sync Supported

3.0

A8-ETHV3

3.7.2

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit 3.0


SFP, SyncE, Multiple Node Sync Sources

A8-ETHV2

3.7.2

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit 3.0


SFP, SyncE Supported

IOM-1G

3.7.2

1G 7705 IOM

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-10

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent 7705 Service Aggregation Router

Table 3-10

Supported Modules for Alcatel-Lucent 7705 SARCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

CSM-1G

3.7.2

1G 7705 CSM

3.0

Alcatel-Lucent 7705 SARSupported Technologies


The following technologies are supported by the Alcatel-Lucent 7705 SAR in Cisco ANA Version 3.7.2
and 3.7.3:

IP, page 3-20

Routing Protocols, page 3-23

Ethernet, page 3-23

Hardware, page 3-24

Serial, page 3-26

MPLS, page 3-26

Alcatel-Lucent 7705 SARSupported Service Events


Table 3-11

Supported Service Events for Alcatel-Lucent 7705 SARCisco ANA Version 3.7.2 and
3.7.3

Event Name

ANA
Version

DP
Expedited Version

Card In/Out

3.7.2

3.0

Link Down/Up

3.7.2

3.0

Device Unreachable

3.7.2

3.0

CPU Over Utilized

3.7.2

3.0

Device Unsupported

3.7.2

3.0

Module Unsupported

3.7.2

3.0

Port Flapping

3.7.2

3.0

Port Down

3.7.2

3.0

Card Up/Down

3.7.2

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-11

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent 7750/7710 Service Router

Alcatel-Lucent 7750/7710 Service Router


This section includes the following information about Alcatel-Lucent 7750/7710 SR devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Alcatel-Lucent
7750/7710 Service Router):
This section contains the following topics:

Alcatel-Lucent 7750/7710 SRSupported Software Versions, page 3-12

Alcatel-Lucent 7750/7710 SRSupported Topologies, page 3-12

Alcatel-Lucent 7750/7710 SRSupported Modules, page 3-12

Alcatel-Lucent 7750/7710 SRSupported Technologies, page 3-13

Alcatel-Lucent 7750/7710 SRSupported Service Events, page 3-13

Alcatel-Lucent 7750/7710 SRSupported Software Versions


Table 3-12

Supported Software Versions for Alcatel-Lucent 7750/7710


SRCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

TiMOS-B-7.0.R4

3.7.2

3.0

TiMOS-C-7.0.R4

3.7.2

3.0

TiMOS-C-8.0.R7

3.7.2/3.7.3

5.0

Alcatel-Lucent 7750/7710 SRSupported Topologies


Table 3-13

Supported Topologies for Alcatel-Lucent 7750/7710 SRCisco ANA Version 3.7.2 and
3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

3.0

Alcatel-Lucent 7750/7710 SRSupported Modules


Table 3-14

Supported Modules for Alcatel-Lucent 7750/7710 SRCisco ANA Version 3.7.2 and
3.7.3

Module Name

ANA
Version

Module Description

DP Version

M60-10/100ETH-TX

3.7.2

MDA 60 Ports 10/100 Ethernet TX

3.0

C5-1GB-XP-SFP

3.7.2

Compact MDA 5-Port 10/100/1000


Ethernet Extended Performance SFP

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-12

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent 7750/7710 Service Router

Table 3-14

Supported Modules for Alcatel-Lucent 7750/7710 SRCisco ANA Version 3.7.2 and
3.7.3 (Continued)

Module Name

ANA
Version

M10-1GB-XP-SFP

Module Description

DP Version

3.7.2

MDA 10-Port 10/100/1000 Ethernet


Extended Performance SFP

3.0

VSM-CCA

3.7.2

VSM Cross Connect

3.0

IOM-XP

3.7.2

7750 Extended Performance IOM

3.0

CFM-XP

3.7.2

7750 Extended Performance CFM

3.0

IOM2-20G

3.7.2

2x10-Gig MDA IOM Card

3.0

SFM2-200G

3.7.2

200G CPM/SF module

3.0

SFM2-400G

3.7.2/3.7.
3

400G CPM/SF Module

5.0

M2-10GB-XFP

3.7.2/3.7.
3

MDA 2-Port 10-Gig Ethernet XFP

5.0

M1-10GB-XFP

3.7.2/3.7.
3

MDA 2 Ports 10Gig Ethernet XFP

5.0

M10-1GB-SFP-B

3.7.2/3.7.
3

MDA 10 Ports 10/100/1000 Ethernet SFP 5.0

Alcatel-Lucent 7750/7710 SRSupported Technologies


The following technologies are supported by the Alcatel-Lucent 7750/7710 SR in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 3-20

Routing Protocols, page 3-23

Ethernet, page 3-23

Hardware, page 3-24

Serial, page 3-26

MPLS, page 3-26

Alcatel-Lucent 7750/7710 SRSupported Service Events


Table 3-15

Supported Service Events for Alcatel-Lucent 7750/7710 SRCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Card In/Out

3.7.2

3.0

Link Down/Up

3.7.2

3.0

Device Unreachable

3.7.2

3.0

CPU Over Utilized

3.7.2

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-13

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent Intelligent Services Access Manager

Table 3-15

Supported Service Events for Alcatel-Lucent 7750/7710 SRCisco ANA Version 3.7.2 and 3.7.3 (Continued)

Event Name

ANA
Version

DP
Expedited Version

Device Unsupported

3.7.2

3.0

Module Unsupported

3.7.2

3.0

Port Flapping

3.7.2

3.0

Port Down

3.7.2

3.0

Card Up/Down

3.7.2

3.0

Alcatel-Lucent Intelligent Services Access Manager


This section includes the following information about Alcatel-Lucent ISAM devices (for information on
the NE types supported in Cisco ANA Version 3.7.2/3.7.3, see Alcatel-Lucent Intelligent Services
Access Manager):
This section contains the following topics:

Note

Alcatel-Lucent ISAMSupported Software Versions, page 3-14

Alcatel-Lucent ISAMSupported Topologies, page 3-15

Alcatel-Lucent ISAMSupported Modules, page 3-15

Alcatel-Lucent ISAMSupported Technologies, page 3-17

Alcatel-Lucent ISAMSupported Service Events, page 3-18

Alcatel ATM Subscriber Access Multiplexer device was already supported in the ANA version prior to
3.7.2.

Alcatel-Lucent ISAMSupported Software Versions


Table 3-16

Supported Software Versions for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

Software Version

ANA Version

DP Version

2.0.0.16

3.7.2/3.7.3

6.0

2.3.1.15

3.7.2/3.7.3

6.0

2.4.2.4

3.7.2/3.7.3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-14

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent Intelligent Services Access Manager

Alcatel-Lucent ISAMSupported Topologies


Table 3-17

Supported Topologies for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Version

ATM

3.7.2/3.7.
3

6.0

Ethernet

Ethernet

3.7.2/3.7.
3

6.0

Physical Layer

Physical Layer

3.7.2/3.7.
3

6.0

Topology Type

Link Type

ATM

Alcatel-Lucent ISAMSupported Modules


Table 3-18

Supported Modules for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

Module Description

DP Version

AACU-A

3.7.2/3.7.
3

ADSL Alarm Control Unit version A (R3


equipment)

6.0

AACU-C

3.7.2/3.7.
3

ADSL Alarm Control Unit version C (R4


equipment)

6.0

ABLT-D

3.7.2/3.7.
3

MultiDSL POTS UD BVB LT standard version D 6.0

ABLT-E

3.7.2/3.7.
3

Multi-DSL POTS Line Termination version E

6.0

ADLT-C

3.7.2/3.7.
3

ADSL Line termination version C (4 lines)

6.0

ADLT-E

3.7.2/3.7.
3

ADSL Line termination version E (4 lines)

6.0

ADLT-F

3.7.2/3.7.
3

ADSL (Euro) Line termination version F (ISDN


support, 4 lines)

6.0

ADLT-J

3.7.2/3.7.
3

ADSL Line termination version J (12 lines)

6.0

ADLT-K

3.7.2/3.7.
3

ADSL Line termination version K (12 lines)

6.0

ADLT-L

3.7.2/3.7.
3

ADSL Line termination version L (24 lines)

6.0

ADLT-M

3.7.2/3.7.
3

ADSL Line termination version M (12 lines)

6.0

ADLT-S

3.7.2/3.7.
3

ADSL Line Termination version S - BVB enabled 6.0

Module Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-15

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent Intelligent Services Access Manager

Table 3-18

Supported Modules for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

Module Description

DP Version

ADLT-W

3.7.2/3.7.
3

ADSL Line Termination version W - POTS/BVB


ready

6.0

ADSE-A

3.7.2/3.7.
3

ADSL Serial Extender version A

6.0

ADSE-B

3.7.2/3.7.
3

ADSL Serial Extender version B

6.0

ADSE-C

3.7.2/3.7.
3

ADSL Serial Extender version C

6.0

AICC-A

3.7.2/3.7.
3

IMA ATM E1-NT 2 Mits Controller Card

6.0

ASCC-P

3.7.2/3.7.
3

PDH Interface Controller Card

6.0

ASCC-PE

3.7.2/3.7.
3

PDH E3 Interface Controller Card

6.0

ASCC-S1

3.7.2/3.7.
3

STM-1 Interface Controller Card

6.0

BSEC-A

3.7.2/3.7.
3

Broad Band Shelf Extender Card

6.0

D1LT-A

3.7.2/3.7.
3

DS1 Line termination version A

6.0

D1LT-B

3.7.2/3.7.
3

4 T1 ports Using IMA Group

6.0

D3LT-A

3.7.2/3.7.
3

DS3 Line termination version A

6.0

D3NT-A

3.7.2/3.7.
3

DS3 Network Termination version A

6.0

D3NT-C

3.7.2/3.7.
3

DS3 Network Termination version C

6.0

E1LT-A

3.7.2/3.7.
3

E1 (IMA) Line Termination version A (4 lines)

6.0

E1NT-A

3.7.2/3.7.
3

(Quad) E1 (IMA) Network Termination version A 6.0

E1NT-C

3.7.2/3.7.
3

GANT-B motherboard and E1PL-B daughterboard 6.0


(PLIM)

EBLT-A

3.7.2/3.7.
3

ADSL2+ POTS Line Termination version A

6.0

EBLT-C

3.7.2/3.7.
3

ADSL2+ POTS Line Termination version C

6.0

ECNT-A

3.7.2/3.7.
3

7302 ISAM Combined network termination


version A

6.0

Module Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-16

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Alcatel-Lucent Intelligent Services Access Manager

Table 3-18

Supported Modules for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

Module Name

ANA
Version

Module Description

DP Version

LTAC-C

3.7.2/3.7.
3

Line Terminal ADSL Combiner Card

6.0

LTAC-D

3.7.2/3.7.
3

Line Terminal ADSL Combiner Card

6.0

LTSC-A

3.7.2/3.7.
3

Line Termination SHDSL Card

6.0

MACU-A

3.7.2/3.7.
3

MiniRAM ACU version A

6.0

NBLC-A

3.7.2/3.7.
3

Narrowband Line Card

6.0

SALT-A

3.7.2/3.7.
3

1 Port OC3 Card

6.0

SALT-C

3.7.2/3.7.
3

STM-1/OC3c (HCL based) Line Termination Unit 6.0


version C

SANT-D

3.7.2/3.7.
3

Synchronous (STM1) ATM Network Termination 6.0


version D

SANT-E

3.7.2/3.7.
3

GANT-A motherboard and SONI-A


daughterboard (PLIM)

6.0

SANT-F

3.7.2/3.7.
3

GANT-B motherboard and SONI-A


daughterboard (PLIM)

6.0

SANT-G

3.7.2/3.7.
3

Synchronous (STM1) ATM Network Termination 6.0


version G

SHLT-B

3.7.2/3.7.
3

SHDSL Line termination versoion B (12 lines)

SMLT-A

3.7.2/3.7.
3

SHDSL Line termination version A (24 lines with 6.0


IMA)

SMLT-B

3.7.2/3.7.
3

SHDSL Line Termination Unit Version B(12 lines, 6.0


with IMA)

6.0

Alcatel-Lucent ISAMSupported Technologies


The following technologies are supported by the Alcatel-Lucent ISAM in
Cisco ANA Version 3.7.2/3.7.3:

IP, page 3-20

ATM, page 3-20

Ethernet, page 3-23

xDSL, page 3-22

SONET/SDH, page 3-22

Hardware, page 3-24

Serial, page 3-26

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-17

Chapter 3

Support Information for Alcatel-Lucent Devices

Alcatel-Lucent Intelligent Services Access Manager

Additional Technologies, page 3-27

Alcatel-Lucent ISAMSupported Service Events


Table 3-19

Supported Service Events for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2/3.7.
3

6.0

All IP Interfaces Down

3.6.1

6.0

BGP process up

3.7.2/3.7.
3

6.0

Card Down

3.7.2/3.7.
3

6.0

Card In

3.7.2/3.7.
3

6.0

Card Out

3.7.2/3.7.
3

6.0

Card Up

3.7.2/3.7.
3

6.0

Cloud Problem

3.7.2/3.7.
3

6.0

CPU utilization exceeded upper


threshold

3.7.2/3.7.
3

6.0

Device Unreachable

3.7.2/3.7.
3

6.0

Device Unsupported

3.7.2/3.7.
3

6.0

Interface status down flapping

3.7.2/3.7.
3

6.0

Interface status down flapping update 3.7.2/3.7.


3

6.0

Keepalive configured

3.7.2/3.7.
3

6.0

Keepalive not configured

3.7.2/3.7.
3

6.0

Layer 2 Tunnel Down

3.7.2/3.7.
3

6.0

Link Down

3.7.2/3.7.
3

6.0

Link up

3.7.2/3.7.
3

6.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-18

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Supported Technologies on Alcatel-Lucent Devices

Table 3-19

Supported Service Events for Alcatel-Lucent ISAMCisco ANA Version 3.7.2/3.7.3

Event Name

ANA
Version

DP
Expedited Version

Memory utilization exceeded upper


threshold

3.7.2/3.7.
3

6.0

Module Unsupported

3.7.2/3.7.
3

6.0

Port Down

3.7.2/3.7.
3

6.0

Port Flapping

3.7.2/3.7.
3

6.0

Rx utilization exceeded upper


threshold

3.7.2/3.7.
3

6.0

Tx utilization exceeded upper


threshold

3.7.2/3.7.
3

6.0

VPN Leak

3.7.2/3.7.
3

6.0

Supported Technologies on Alcatel-Lucent Devices


The following sections list the objects and attributes that are supported on Alcatel-Lucent devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:
This section contains the following topics:

IP, page 3-20

ATM, page 3-20

SONET/SDH, page 3-22

TDM/DSx, page 3-22

xDSL, page 3-22

Routing Protocols, page 3-23

Ethernet, page 3-23

Hardware, page 3-24

Serial, page 3-26

MPLS, page 3-26

Additional Technologies, page 3-27

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-19

Chapter 3

Support Information for Alcatel-Lucent Devices

Supported Technologies on Alcatel-Lucent Devices

IP

ISAM

7705 SAR

Attribute

7450 ESS

IP Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3

ASAM

Table 3-20

IMO NameIIPInterface

IP Address

Subnetwork Mask

IP Interface Addresses Array

Interface Name

Interface Description
IP Interface State

Routing Table

Name

Logical Sons

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IP Address

MAC Address

Port

IMO NameIRoutingEntity

IMO NameIARP Entity

ARP Table
IMO NameIARP Entry

ATM

ISAM

7705 SAR

Attribute

7450 ESS

ATM Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3

ASAM

Table 3-21

IMO NameIAtm

Interface Type

VP and VC Ranges

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-20

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Supported Technologies on Alcatel-Lucent Devices

VC Table

ISAM

7705 SAR

Attribute

7450 ESS

ATM Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3

ASAM

Table 3-21

Virtual Channel Identifier

Virtual Path Identifier

Discarded and Received Input


Data Counters

Dropped and Forward Output


Data Counters

Ingress Traffic Descriptor

Egress Traffic Descriptor

Administrative Status

Operational Status

Traffic Descriptor Type

Service Category

Cell Loss Priority

Cell Delay Variation

Cell Delay Variation Tolerance

Maximum High Priority and


Aggregate Cell Rates

Minimum High Priority and


Aggregate Cell Rates

Sustainable High Priority and


Aggregate Cell Rates

Peak High Priority and


Aggregate Cell Rates

Name

Index

IMO NameIAtmVc

IMO NameIAtmTrafficDescriptor

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-21

Chapter 3

Support Information for Alcatel-Lucent Devices

Supported Technologies on Alcatel-Lucent Devices

SONET/SDH

ISAM

7705 SAR

Attribute

7450 ESS

SONET/SDH Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2


and 3.7.3

ASAM

Table 3-22

IMO NameISonetSdh

Loopback Type

TDM/DSx

ISAM

7705 SAR

Attribute

7450 ESS

TDM/DSx Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.1

ASAM

Table 3-23

IMO NameIDS1Pdh / IDS3Pdh

Framing Type

Cell Mapping Type

Y1

Scrambling Mode

Y2

1, 2

Supported only for DS3

xDSL

ISAM

7705 SAR

Attribute

7450 ESS

xDSL Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3

ASAM

Table 3-24

IMO NameIDsl / IIdsl / ISdsl / Ishdsl

Customer Identification

Traffic Descriptor

Maximum Reception and


Transmission Bandwidth

Same as IDsl

IMO NameIADsl

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-22

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Supported Technologies on Alcatel-Lucent Devices

Routing Protocols

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Routing Protocols Attribute Support on


Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3

ASAM

Table 3-25

IMO NameIBgpNeighborEntry

Remote Identifier

Y Y

Remote Address

Y Y

Remote Autonomous System

Y Y

Peer State

Y Y

Peer AdminState

Y Y

Hold Time

Y Y

Keep Alive Time

Y Y

IMO NameIOspfEntry

Area Identifier

Y Y

IP Address

Y Y

Type

Y Y

Administrative Status

Y Y

Ospf Entry State

Y Y

Ethernet

7750/7710 SR

Y Y

Y Y

ISAM

7705 SAR

Attribute

7450 ESS

Ethernet Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3

ASAM

Table 3-26

IMO NameIEthernet

MAC Address

Port Type
IMO NameIIEEE802

VLAN Identification

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-23

Chapter 3

Support Information for Alcatel-Lucent Devices

Supported Technologies on Alcatel-Lucent Devices

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Ethernet Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3 (Continued)

ASAM

Table 3-26

IMO NameIEthernetChannel

Group Number

IANA Type

Hardware

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Hardware Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3

ASAM

Table 3-27

IMO NameIChassis

Description

Y Y Y

Serial Number

Y Y Y

IMO NameIShelf

Description
Status

Y
Y

IMO NameIModule

Module Name

Y Y Y

Module Description

Y Y Y

Software Version

Y Y Y

Operational Status

Y Y

Hardware Type + Version

Y Y

Redundant Equipment

Configured Redundancy

Redundancy Status

Operational Status Last Changed Y

Supported Physical Termination


Points

Y Y Y

Fan Speed

Y Y Y

Fan Status

Y Y Y

Serial Number (soft property)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-24

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Supported Technologies on Alcatel-Lucent Devices

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Hardware Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3 (Continued)

ASAM

Table 3-27

Power type

Y Y

Power AC status

Y Y

Power DC Status

Y Y Y

Y Y Y

Y Y Y

Investigation State

Y Y

Element Category

Y Y

IMO NameIManagedElement

IP Address
Communication State

Element Type and Key

Y Y Y

Device Name

Y Y Y

System Name

Y Y Y

System Description

Y Y Y

Up Time

Y Y Y

Software Version

Y Y Y

Vendor Identity

Y Y Y

Memory and CPU Usage

Y Y Y

Sys Contact

Y Y Y

Sys Location

Y Y Y

Serial Number

Y Y Y

IMO NameISystemService

Up Time

IMO NameIBridge

MAC Address

IP Interface

Name

Logical Sons

IMO NameIBridgeEntry

Destination MAC

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-25

Chapter 3

Support Information for Alcatel-Lucent Devices

Supported Technologies on Alcatel-Lucent Devices

Serial

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Serial Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3

ASAM

Table 3-28

IMO NameIPhysicalLayer

Media Type

Y Y

Maximum Speed

Y Y

Is Internal Port

Discarded and Received Input


Data Counters

Dropped and Forward Output


Data Counters

Administrative Status

Y Y Y

Operational Status

Y Y Y

Last Changed

Y Y Y

IANA Type

Port Alias

Y Y

Location

Y Y

Status

Y Y

MPLS

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

MPLS Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and


3.7.3

ASAM

Table 3-29

IMO NameILse

LDP Service

Y Y

IMO NameILdpService

Local Identification Status

Y Y

Status

Y Y

LDP Peers

Y Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-26

OL-24429-01

Chapter 3

Support Information for Alcatel-Lucent Devices


Supported Technologies on Alcatel-Lucent Devices

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

MPLS Attribute Support on Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

ASAM

Table 3-29

IMO NameILdpPeer

Peer Identification

Y Y

Transport Address

Y Y

Distribution Method

Y Y

Protocol Type

Y Y

Path Vector Limit

Y Y

Session Status

Y Y

Protocol Version Hold Time

Y Y

Hold Time

Y Y

Keep Alive Time

Y Y

Peer Discovery Sources

Y Y

IMO NameILdpDiscoverySource

Source Address

Y Y

Type

Y Y

Additional Technologies

ISAM

7750/7710 SR

7705 SAR

Attribute

7450 ESS

Additional Technologies Attribute Support on


Alcatel-Lucent DevicesCisco ANA Version 3.7.2 and 3.7.3

ASAM

Table 3-30

IMO NamePOS

POS

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

3-27

Chapter 3

Support Information for Alcatel-Lucent Devices

Supported Technologies on Alcatel-Lucent Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

3-28

OL-24429-01

CH A P T E R

Support Information for Calix Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
Calix devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects and
attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference Guide.
This chapter contains the following topics:

Calix Blade 6214 Series DSLAM, page 4-1

Calix Blade 6216 Series DSLAM, page 4-4

Calix Blade 6312 Series Switches, page 4-5

Calix Blade 6316 Series Switches, page 4-7

Calix Blade 6450 Series Switches, page 4-10

Supported Technologies on Calix Devices, page 4-12

Calix Blade 6214 Series DSLAM


This section includes the following information about Calix Blade 6214 Series DSLAM devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see Calix Blade 6214
Series DSLAM):

Calix Blade 6214 Series DSLAMSupported Software Versions, page 4-1

Calix Blade 6214 Series DSLAMSupported Modules, page 4-2

Calix Blade 6214 Series DSLAMSupported Technologies, page 4-2

Calix Blade 6214 Series DSLAMSupported Service Events, page 4-3

Calix Blade 6214 Series DSLAMSupported Software Versions


Table 4-1

Supported Software Versions for Calix Blade 6214 Series


DSLAMCisco ANA Version 3.7.2 and 3.7.3

Software Version

Product
Version

DP Version

V5.5R4

3.7.2/3.7.3

9.0

V5.5R5

3.7.2/3.7.3

9.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-1

Chapter 4

Support Information for Calix Devices

Calix Blade 6214 Series DSLAM

Table 4-1

Supported Software Versions for Calix Blade 6214 Series


DSLAMCisco ANA Version 3.7.2 and 3.7.3 (Continued)

Software Version

Product
Version

DP Version

V5.5R9

3.7.2/3.7.3

9.0

V5.5R10

3.7.2/3.7.3

9.0

7.2R5

3.7.2/3.7.3

9.0

Calix Blade 6214 Series DSLAMSupported Modules


Table 4-2

Supported Modules for Calix Blade 6214 Series DSLAMCisco ANA Version 3.7.2 and
3.7.3

Module Name

Product
Version

Module Description

DP Version

B6214

3.7.2/3.7.
3

6214 Blade and BLC 6214 Assembly 9.0


ADSL2Plus with Gigabit
Ethernet,Integrated Splitter (POTS: 48
ports,Gigabit Ethernet: 10 ports)

Power Supply

3.7.2/3.7.
3

LM87 +3.3V1
440GP +1.8V
+1.2V
+1.5V
+1.8V
+2.5V
+18V
FPGA +1.8V
SSTL2VTT +1.25V
SSTL2REF +1.25V
#B Vin -48V
#A Vin -48V

9.0

Fan Tray

3.7.2/3.7.
3

It supports Fan 1 to Fan 102.

9.0

1. Supports the 5.5R4, R5, R9, and R10 OS versions


2. Fan 1 to Fan 4 support 5.5R4, R5, R9, and R10 OS versions; and Fan 5 to Fan 10 support 5.5R10 OS version.

Calix Blade 6214 Series DSLAMSupported Technologies


The following technologies are supported by the Calix Blade 6214 Series DSLAM devices in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 4-13

Ethernet (IEEE 802.3), page 4-14

ATM, page 4-14

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-2

OL-24429-01

Chapter 4

Support Information for Calix Devices


Calix Blade 6214 Series DSLAM

Point to Point, page 4-14

DSL, page 4-15

Hardware, page 4-15

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

Calix Blade 6214 Series DSLAMSupported Service Events


Table 4-3

Supported Service Events for Calix Blade 6214 Series


DSLAMCisco ANA Version 3.7.2 and 3.7.3

Product
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2/3.7.
3

9.0

All IP Interfaces Down

3.7.2/3.7.
3

9.0

Device Unreachable

3.7.2/3.7.
3

9.0

Device Unsupported

3.7.2/3.7.
3

9.0

Link Down

3.7.2/3.7.
3

9.0

Link up

3.7.2/3.7.
3

9.0

Port Down

3.7.2/3.7.
3

9.0

Interface Status Down/Up

3.7.2/3.7.
3

9.0

CPU Over Utilized

3.7.2/3.7.
3

9.0

Memory Over Utilized

3.7.2/3.7.
3

9.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-3

Chapter 4

Support Information for Calix Devices

Calix Blade 6216 Series DSLAM

Calix Blade 6216 Series DSLAM


This section includes the following information about Calix Blade 6216 Series DSLAM (for information
on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see Calix Blade 6216 Series DSLAM):

Calix Blade 6216 Series DSLAMSupported Software Versions, page 4-4

Calix Blade 6216 Series DSLAMSupported Modules, page 4-4

Calix Blade 6216 Series DSLAMSupported Technologies, page 4-4

Calix Blade 6316 Series SwitchesSupported Service Events, page 4-9

Calix Blade 6216 Series DSLAMSupported Software Versions


Table 4-4

Supported Software Versions for Calix Blade 6216 Series


DSLAMCisco ANA Version 3.7.2 and 3.7.3

Software Version

Product
Version

DP Version

7.2R5

3.7.2/3.7.3

9.0

Calix Blade 6216 Series DSLAMSupported Modules


Table 4-5

Supported Modules for Calix Blade 6216 Series DSLAMCisco ANA Version 3.7.2 and
3.7.3

Module Name
B6-216

Product
Version
3.7.2/3.7.
3

Module Description

DP Version

The B6-216 features eight Gigabit


Ethernet ports, two optical and six
copper and 48-port VDSL2/ADSL2+
card.

9.0

Calix Blade 6216 Series DSLAMSupported Technologies


The following technologies are supported by the Calix Blade 6216 Series DSLAM in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 4-13

Ethernet (IEEE 802.3), page 4-14

ATM, page 4-14

Point to Point, page 4-14

DSL, page 4-15

Hardware, page 4-15

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-4

OL-24429-01

Chapter 4

Support Information for Calix Devices


Calix Blade 6312 Series Switches

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

Calix Blade 6216 Series DSLAMSupported Service Events


Table 4-6

Supported Service Events for Calix Blade 6216 Series


DSLAMCisco ANA Version 3.7.2 and 3.7.3

Product
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2/3.7.
3

9.0

All IP Interfaces Down

3.7.2/3.7.
3

9.0

Device Unreachable

3.7.2/3.7.
3

9.0

Device Unsupported

3.7.2/3.7.
3

9.0

Link Down

3.7.2/3.7.
3

9.0

Link up

3.7.2/3.7.
3

9.0

Port Down

3.7.2/3.7.
3

9.0

Interface Status Down/Up

3.7.2/3.7.
3

9.0

CPU Over Utilized

3.7.2/3.7.
3

9.0

Memory Over Utilized

3.7.2/3.7.
3

9.0

Event Name

Calix Blade 6312 Series Switches


This section includes the following information about Calix Blade 6312 Series Switch devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see Calix Blade 6312
Series Switches):

Calix Blade 6312 Series SwitchesSupported Software Versions, page 4-6

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-5

Chapter 4

Support Information for Calix Devices

Calix Blade 6312 Series Switches

Calix Blade 6312 Series SwitchesSupported Modules, page 4-6

Calix Blade 6312 Series SwitchesSupported Technologies, page 4-6

Calix Blade 6312 Series SwitchesSupported Service Events, page 4-7

Calix Blade 6312 Series SwitchesSupported Software Versions


Table 4-7

Supported Software Versions for Calix Blade 6312 Series


SwitchCisco ANA Version 3.7.2 and 3.7.3

Software Version

Product Version

DP Version

5.5R4

3.7.2/3.7.3

9.0

5.5R5

3.7.2/3.7.3

9.0

Calix Blade 6312 Series SwitchesSupported Modules


Table 4-8

Supported Modules for Calix Blade 6312 Series SwitchCisco ANA Version 3.7.2 and
3.7.3

Module Name
6312 Blade

Product
Version
3.7.2/3.7.
3

Module Description

DP Version

Optical Line Termination Blade

9.0

Calix Blade 6312 Series SwitchesSupported Technologies


The following technologies are supported by the Calix Blade 6312 Series Switch devices in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 4-13

Ethernet (IEEE 802.3), page 4-14

Hardware, page 4-15

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-6

OL-24429-01

Chapter 4

Support Information for Calix Devices


Calix Blade 6316 Series Switches

Calix Blade 6312 Series SwitchesSupported Service Events


Table 4-9

Supported Service Events for Calix Blade 6312 Series


SwitchCisco ANA Version 3.7.2 and 3.7.3

Product
Version

DP VerExpedited sion

Active IP Interfaces Found

3.7.2/3.7.
3

9.0

All IP Interfaces Down

3.7.2/3.7.
3

9.0

Device Unreachable

3.7.2/3.7.
3

9.0

Device Unsupported

3.7.2/3.7.
3

9.0

Link Down

3.7.2/3.7.
3

9.0

Link up

3.7.2/3.7.
3

9.0

Port Down

3.7.2/3.7.
3

9.0

Interface Status Down/Up

3.7.2/3.7.
3

9.0

CPU Over Utilized

3.7.2/3.7.
3

9.0

Memory Over Utilized

3.7.2/3.7.
3

9.0

Event Name

Calix Blade 6316 Series Switches


This section includes the following information about Calix Blade 6316 Series Switch devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see Calix Blade 6316
Series Switches):

Calix Blade 6316 Series SwitchesSupported Software Versions, page 4-8

Calix Blade 6316 Series SwitchesSupported Modules, page 4-8

Calix Blade 6316 Series SwitchesSupported Technologies, page 4-8

Calix Blade 6316 Series SwitchesSupported Service Events, page 4-9

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-7

Chapter 4

Support Information for Calix Devices

Calix Blade 6316 Series Switches

Calix Blade 6316 Series SwitchesSupported Software Versions


Table 4-10

Supported Software Versions for Calix Blade 6316 Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

Software Version

Product
Version

DP Version

7.0R1

3.7.2/3.7.3

9.0

7.0R1_S101

3.7.2/3.7.3

9.0

7.2R3

3.7.2/3.7.3

9.0

Calix Blade 6316 Series SwitchesSupported Modules


Table 4-11

Supported Modules for Calix Blade 6316 Series SwitchesCisco ANA Version 3.7.2
and 3.7.3

Module Name

Product
Version

Module Description

DP Version

B6-316

3.7.2/3.7.
3

6316 Blade,10 GE Aggregation Rings, 9.0


Access Rings, Point-to-point and
Business Ethernet Services (10 Gigabit
Ethernet XFP Ports (2),10 Gigabit
Ethernet Copper Ports (2),1 Gigabit
Ethernet SFP Ports (8),1 Gigabit
Ethernet Fiber Ports(Swappable) (40)

Power Supply

3.7.2/3.7.
3

+1.0V

9.0

+5V
-48V_2
-48V_1
+1.5V
+1.2V
+1.25V
+1.8V
+2.5V
+3.3V

Fan Tray

3.7.2/3.7.
3

It supports Fan 1 to Fan 4.

9.0

Calix Blade 6316 Series SwitchesSupported Technologies


The following technologies are supported by the Calix Blade 6316 Series Switch devices in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 4-13

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-8

OL-24429-01

Chapter 4

Support Information for Calix Devices


Calix Blade 6316 Series Switches

Ethernet (IEEE 802.3), page 4-14

Hardware, page 4-15

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

Calix Blade 6316 Series SwitchesSupported Service Events


Table 4-12

Supported Service Events for Calix Blade 6316 Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

Product
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2/3.7.
3

9.0

All IP Interfaces Down

3.7.2/3.7.
3

9.0

Device Unreachable

3.7.2/3.7.
3

9.0

Device Unsupported

3.7.2/3.7.
3

9.0

Link Down

3.7.2/3.7.
3

9.0

Link up

3.7.2/3.7.
3

9.0

Port Down

3.7.2/3.7.
3

9.0

Interface Status Down/Up

3.7.2/3.7.
3

9.0

CPU Over Utilized

3.7.2/3.7.
3

9.0

Memory Over Utilized

3.7.2/3.7.
3

9.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-9

Chapter 4

Support Information for Calix Devices

Calix Blade 6450 Series Switches

Calix Blade 6450 Series Switches


This section includes the following information about Calix Blade 6450 Series Switch devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see Calix Blade 6450
Series Switches):

Calix Blade 6450 Series SwitchesSupported Software Versions, page 4-10

Calix Blade 6450 Series SwitchesSupported Modules, page 4-10

Calix Blade 6450 Series SwitchesSupported Technologies, page 4-11

Calix Blade 6450 Series SwitchesSupported Service Events, page 4-12

Calix Blade 6450 Series SwitchesSupported Software Versions


Table 4-13

Supported Software Versions for Calix Blade 6450 Series


SwitchCisco ANA Version 3.7.2 and 3.7.3

Software Version

Product Version

DP Version

V5.5R4

3.7.2/3.7.3

9.0

V5.5R5

3.7.2/3.7.3

9.0

V5.5R7P8

3.7.2/3.7.3

9.0

7.1R2

3.7.2/3.7.3

9.0

Calix Blade 6450 Series SwitchesSupported Modules


Table 4-14

Module Name
B6450

Supported Modules for Calix Blade 6450Series SwitchCisco ANA Version 3.7.2 and
3.7.3

Product
Version
3.7.2/3.7.
3

Module Description

DP Version

B6450 Assembly 10 GbE Aggregation 9.0


Rings, Access Rings, Point-to-point
and Business Ethernet Services (10
Gigabit Ethernet XFP Ports (2),10
Gigabit Ethernet Ports (2),10 Gigabit
Ethernet Copper Ports (2),1 Gigabit
Ethernet SFP Ports (16),1 Gigabit
Ethernet Copper Ports (6)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-10

OL-24429-01

Chapter 4

Support Information for Calix Devices


Calix Blade 6450 Series Switches

Table 4-14

Supported Modules for Calix Blade 6450Series SwitchCisco ANA Version 3.7.2 and
3.7.3 (Continued)

Module Name

Product
Version

Module Description

DP Version

Power Supply

3.7.2/3.7.
3

+5V XFP2
+5V XFP1
+5V
LM87 +3.3V
440GP +1.8V
+1.2V
+1.25V
Enet +1.8V
+2.5V
SSTL2VTT +1.25V
SSTL2REF +1.25V
FPGA +1.8V
#B Vin -48V
#A Vin -48V
Exhaust1
PCB Bottom Middle2

9.0

Fan Tray

3.7.2/3.7.
3

It supports Fan 1 to Fan 103 .

9.0

1. Supports the 7.1R2 OS version


2. Supports the 7.1R2 OS version
3. Fan 1 to Fan 4 Support the 5.5R4, R5, R7P8, and 7.1R2 OS versions; and Fan 5 to Fan 10 support 7.1R OS version

Calix Blade 6450 Series SwitchesSupported Technologies


The following technologies are supported by the Calix Blade 6450 Series Switch devices in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 4-13

Ethernet (IEEE 802.3), page 4-14

Hardware, page 4-15

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-11

Chapter 4

Support Information for Calix Devices

Supported Technologies on Calix Devices

Calix Blade 6450 Series SwitchesSupported Service Events


Table 4-15

Supported Service Events for Calix Blade 6450 Series


SwitchCisco ANA Version 3.7.2 and 3.7.3

Product
Version

DP VerExpedited sion

Active IP Interfaces Found

3.7.2/3.7.
3

9.0

All IP Interfaces Down

3.7.2/3.7.
3

9.0

Device Unreachable

3.7.2/3.7.
3

9.0

Device Unsupported

3.7.2/3.7.
3

9.0

Link Down

3.7.2/3.7.
3

9.0

Link up

3.7.2/3.7.
3

9.0

Port Down

3.7.2/3.7.
3

9.0

Interface Status Down/Up

3.7.2/3.7.
3

9.0

CPU Over Utilized

3.7.2/3.7.
3

9.0

Memory Over Utilized

3.7.2/3.7.
3

9.0

Event Name

Supported Technologies on Calix Devices


The following sections list the objects and attributes that are supported on Calix devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

IP, page 4-13

Ethernet (IEEE 802.3), page 4-14

ATM, page 4-14

Point to Point, page 4-14

DSL, page 4-15

Hardware, page 4-15

Base Logical Components, page 4-16

Common, page 4-17

Additional Technologies, page 4-18

Additional Technologies(EPS Info), page 4-18

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-12

OL-24429-01

Chapter 4

Support Information for Calix Devices


Supported Technologies on Calix Devices

Additional Technologies(EPS State), page 4-18

Additional Technologies(Access Prof Info), page 4-19

Additional Technologies(Access Profile), page 4-19

IP
The following table (Table 4-16) lists the ip protocols attributes that are supported on Calix devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

IP Attribute Support on Calix Blade Series SwitchesCisco ANA Version 3.7.2 and
3.7.3

BLC 6214

Table 4-16

IMO NameIIPInterface

IP Address

Subnetwork Mask

Interface Name

IP Interface State

Routing Table

ARP Entity

Name

Logical Sons

Destination IP Subnet

Next Hop IP Address

Type

Outgoing Interface Name

IP Address

MAC Address

Port

Entry Type

IMO NameIRoutingEntity

IMO NameIRoutingEntry

IMO NameIARPEntity

ARP Table
IMO NameIARPEntry

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-13

Chapter 4

Support Information for Calix Devices

Supported Technologies on Calix Devices

Ethernet (IEEE 802.3)


The following table (Table 4-17) lists the ethernet (ieee 802.3) protocol attributes that are supported on
Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Ethernet (IEEE 802.3) Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-17

IMO NameIEthernet

IANA Type

Mode

Virtual LAN Table

IMO NameIVlanInterface

IANA Type
IMO NameIIEEE802

VLAN Identification

IANA Type

ATM
The following table (Table 4-18) lists the atm protocols attributes that are supported on Calix devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

ATM Attribute Support on Calix Blade Series SwitchesCisco ANA Version 3.7.2 and
3.7.3

BLC 6214

Table 4-18

IMO NameIAtmVc

Virtual Channel Identifier

Virtual Path Identifier

Administrative Status

Operational Status

Point to Point
The following table (Table 4-19) lists the point to point protocols attributes that are supported on Calix
devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-14

OL-24429-01

Chapter 4

Support Information for Calix Devices


Supported Technologies on Calix Devices

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Point to Point Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-19

IMO NameIencapsulation (HDLC/PPP)

Virtual Connection

Binding Status

DSL
The following table (Table 4-20) lists the dsl protocols attributes that are supported on Calix devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

DSL Attribute Support on Calix Blade Series SwitchesCisco ANA Version 3.7.2 and
3.7.3

BLC 6214

Table 4-20

IMO NameIAdsltraTrafficDescriptor

Max, Min and Target Transmission


and Reception Noise Margins

Max, Min and Planned Target


Y
Transmission and Reception Bit Rates

Channel type

Name

Hardware
The following table (Table 4-21) lists the hardware protocols attributes that are supported on Calix
devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Physical Equipment Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-21

IMO NameIChassis

Description

Equipment Holder Type

Type

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-15

Chapter 4

Support Information for Calix Devices

Supported Technologies on Calix Devices

Serial Number

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Physical Equipment Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3 (Continued)

BLC 6214

Table 4-21

Module Name

Module Description

Software Version

IMO NameIShelf

Equipment Holder Type


IMO NameIModule

Operational Status
Hardware Type & Version

Operational Status Last Changed

Serial Number (soft property)

Base Logical Components


The following table (Table 4-22) lists the base logical components protocols attributes that are supported
on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Base Logical Components Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-22

IMO NameIManagedElement

IP Address

Communication State

Investigation State

Element Category

Element Type and Key

Device Name

System Name

System Description

Up Time

Software Version

Vendor Identity

Memory and CPU Usage

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-16

OL-24429-01

Chapter 4

Support Information for Calix Devices


Supported Technologies on Calix Devices

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Base Logical Components Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3 (Continued)

BLC 6214

Table 4-22

IMO NameISystemService

Up Time

Common
The following table (Table 4-23) lists the common protocols attributes that are supported on Calix
devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Common Attribute Support on Calix Blade Series SwitchesCisco ANA Version 3.7.2
and 3.7.3

BLC 6214

Table 4-23

IMO NameIPhysicalLayer

Media Type

Maximum Speed

Is Internal Port

Discarded and Received Input Data


Counters

Dropped and Forward Output Data


Counters

Administrative Status

Operational Status

Last Changed

IANA Type

Bridge Table

Type

MAC Address

IP Interface

Name

Logical Sons

IMO NameIBridge

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-17

Chapter 4

Support Information for Calix Devices

Supported Technologies on Calix Devices

Additional Technologies
The following table (Table 4-24) lists the additional technologies protocols attributes that are supported
on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-24

IMO NameIPower Supply

Voltage names

Voltage Value

Fan Name

Fan Value

IMO NameIFan

Additional Technologies(EPS Info)


The following table (Table 4-25) lists the additional technologies (eps info) protocol attributes that are
supported on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies(EPS Info) Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-25

IMO NameIManagedElement

EPS Device mode

EPS Path group

Untagged vlan id

Mac Address

Additional Technologies(EPS State)


The following table (Table 4-26) lists the additional technologies (eps state) protocols attributes that are
supported on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-18

OL-24429-01

Chapter 4

Support Information for Calix Devices


Supported Technologies on Calix Devices

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies(EPS State)Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-26

IMO NameIphysicalLayer

Tagged

Untagged

Doubleqtag

Ring PG1

Ring PG2

Ring all

SUB

INTC

Additional Technologies(Access Prof Info)


The following table (Table 4-27) lists the additional technologies (access prof info) protocols attributes
that are supported on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies(Access Prof Info) Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-27

IMO NameIphysicalLayer

Acess Profile Name

Service ID

Additional Technologies(Access Profile)


The following table (Table 4-28) lists the additional technologies (access profile) protocols attributes
that are supported on Calix devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies(Access Profile) Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3

BLC 6214

Table 4-28

IMO NameICalixAccessProfile

Input Service Policy

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

4-19

Chapter 4

Support Information for Calix Devices

Supported Technologies on Calix Devices

BLC 6450

BLC 6316

BLC 6312

Attributes

BLC 6216

Additional Technologies(Access Profile) Attribute Support on Calix Blade Series


SwitchesCisco ANA Version 3.7.2 and 3.7.3 (Continued)

BLC 6214

Table 4-28

Output Service Policy

Igmp Port Type

Igmp Source Address

Igmp Max Streams

EPSVlan

Mac Limit

Mac Learning

DHCP Mode

DHCP Servers

DHCP Hot Swap

Arp Mode

Arp Cache Timeout

Profile name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

4-20

OL-24429-01

CH A P T E R

Support Information for DragonWave Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
DragonWave devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects and
attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference Guide.
This chapter contains the following topics:

DragonWave Horizon Compact Device (Packet Microwave System), page 5-1

DragonWave Horizon Compact Plus Device (Packet Microwave System), page 5-3

DragonWave Horizon Quantum Device (Packet Microwave System), page 5-4

Supported Technologies on DragonWave Devices, page 5-6

DragonWave Horizon Compact Device (Packet Microwave


System)
This section includes the following information about DragonWave Horizon Compact (Packet
Microwave System) devices (for information on the NE types supported in Cisco ANA Version 3.7.2 and
3.7.3, see the DragonWave Horizon Compact Device (Packet Microwave System)):
This section contains the following topics:

Horizon CompactSupported Software Versions, page 5-2

Horizon CompactSupported Topologies, page 5-2

Horizon CompactSupported Modules, page 5-2

Horizon CompactSupported Technologies, page 5-2

Horizon CompactSupported Service Events, page 5-3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-1

Chapter 5

Support Information for DragonWave Devices

DragonWave Horizon Compact Device (Packet Microwave System)

Horizon CompactSupported Software Versions


Table 5-1

Supported Software Versions for Horizon CompactCisco ANA Version 3.7.2 and
3.7.3

Software Version

ANA Version

DP Version

1.03.02

3.7.2/3.7.3

5.0

1.04.05

3.7.2/3.7.3

5.0

Horizon CompactSupported Topologies


Table 5-2

Supported Topologies for Horizon CompactCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Generic Port

Generic Port1

3.7.3/3.8

7.0

1.Currently it is supported by using generic methodology.

Horizon CompactSupported Modules


Table 5-3

Supported Modules for Horizon CompactCisco ANA Version 3.7.2 and 3.7.3

Module Name
Horizon Compact

ANA
Version
3.7.2/3.7.
3

Module Description

DP Version

Horizon Compact is not a modular


5.0
device. It contains 2 Ethernet ports and 1
Wireless port.

Horizon CompactSupported Technologies


The following technologies are supported by the Horizon Compact devices in Cisco ANA Version 3.7.2
and 3.7.3:

Ethernet, page 5-7

Hardware, page 5-8

Serial, page 5-10

Generic Port, page 5-10

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-2

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


DragonWave Horizon Compact Plus Device (Packet Microwave System)

Horizon CompactSupported Service Events


Table 5-4

Supported Service Events for Horizon CompactCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link up

3.7.2/3.7.3

5.0

DragonWave Horizon Compact Plus Device (Packet Microwave


System)
This section includes the following information about DragonWave Horizon Compact Plus (Packet
Microwave System) devices (for information on the NE types supported in Cisco ANA Version 3.7.2 and
3.7.3, see the DragonWave Horizon Compact Plus Device (Packet Microwave System):
This section contains the following topics:

Horizon Compact PlusSupported Software Versions, page 5-3

Horizon Compact PlusSupported Topologies, page 5-3

Horizon Compact PlusSupported Modules, page 5-4

Horizon Compact PlusSupported Technologies, page 5-4

Horizon Compact PlusSupported Service Events, page 5-4

Horizon Compact PlusSupported Software Versions


Table 5-5

Supported Software Versions for Horizon Compact PlusCisco ANA Version 3.7.2 and
3.7.3

Software Version

ANA Version

DP Version

1.0.0

3.7.2/3.7.3

8.0

Horizon Compact PlusSupported Topologies


Table 5-6

Supported Topologies for Horizon Compact PlusCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Generic Port

Generic Port1

3.7.3

8.0

1.Currently it is supported by using LLDP methodology.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-3

Chapter 5

Support Information for DragonWave Devices

DragonWave Horizon Quantum Device (Packet Microwave System)

Horizon Compact PlusSupported Modules


Table 5-7

Supported Modules for Horizon Compact PlusCisco ANA Version 3.7.2 and 3.7.3

ANA
Version

Module Name
Horizon Compact Plus

3.7.2/3.7.
3

Module Description

DP Version

Horizon Compact Plus is not a modular


device. It contains Ethernet ports and
Wireless ports.

8.0

Horizon Compact PlusSupported Technologies


The following technologies are supported by the Horizon Compact devices in Cisco ANA Version 3.7.2
and 3.7.3:

Ethernet, page 5-7

Ethernet OAM, page 5-7

Hardware, page 5-8

Serial, page 5-10

Generic Port, page 5-10

Local Switching, page 5-11

LLDP, page 5-12

Horizon Compact PlusSupported Service Events


Table 5-8

Supported Service Events for Horizon Compact PlusCisco ANA Version 3.7.2 and
3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link up

3.7.2/3.7.3

8.0

DragonWave Horizon Quantum Device (Packet Microwave


System)
This section includes the following information about DragonWave Horizon Quantum (Packet
Microwave Device) devices (for information on the NE types supported in Cisco ANA Version 3.7.2 and
3.7.3, see the DragonWave Horizon Quantum Device (Packet Microwave System)):
This section contains the following topics:

Horizon QuantumSupported Software Versions, page 5-5

Horizon QuantumSupported Topologies, page 5-5

Horizon QuantumSupported Modules, page 5-5

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-4

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


DragonWave Horizon Quantum Device (Packet Microwave System)

Horizon QuantumSupported Technologies, page 5-6

Horizon QuantumSupported Service Events, page 5-6

Horizon QuantumSupported Software Versions


Table 5-9

Supported Software Versions for Horizon QuantumCisco ANA Version 3.7.2 and
3.7.3

Software Version

ANA Version

DP Version

1.1.0

3.7.2/3.7.3

5.0

Horizon QuantumSupported Topologies


Table 5-10

Supported Topologies for Horizon QuantumCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA Version

DP
Version

Generic Port

Generic Port2

3.7.3/3.8

7.0

2. Currently it is supported by using Generic methodology

Horizon QuantumSupported Modules


Table 5-11

Supported Modules for Horizon QuantumCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA Version Module Description

DP Version

Horizon Quantum

3.7.2/3.7.3

Horizon Quantum is not a modular


5.0
device. It contains 8 Ethernet ports and 2
wireless ports.

Horizon Quantum (Radio)

3.7.2/3.7.3

Horizon Quantum is a dummy module


that contains the sub modules for Radio
properties.

7.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-5

Chapter 5

Support Information for DragonWave Devices

Supported Technologies on DragonWave Devices

Horizon QuantumSupported Technologies


Table 5-12

Supported Service Events for Horizon CompactCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link up

3.7.2/3.7.3

5.0

The following technologies are supported by the Horizon Quantum devices in Cisco ANA Version 3.7.2
and 3.7.3:

Ethernet, page 5-7

Hardware, page 5-8

Serial, page 5-10

Generic Port, page 5-10

Local Switching, page 5-11

Horizon QuantumSupported Service Events


Table 5-13

Supported Service Events for Horizon QuantumCisco ANA Version 3.7.2 and 3.7.3

Event Name
Link up

ANA
Version

DP
Expedited Version

3.7.2/3.7.
3

5.0

Supported Technologies on DragonWave Devices


The following sections list the objects and attributes that are supported on DragonWave devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:
This section contains the following topics:

Ethernet, page 5-7

Hardware, page 5-8

Serial, page 5-10

Generic Port, page 5-10

Local Switching, page 5-11

LLDP, page 5-12

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-6

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


Supported Technologies on DragonWave Devices

Ethernet
The following table (Table 5-14) lists the ethernet attributes that are supported on DragonWave devices
in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Horizon Quantum

Attribute

Horizon Compact Plus

Ethernet Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and


3.7.3

Horizon Compact

Table 5-14

IMO NameIEthernet

MAC Address

Duplex Mode

IANA Type

Ethernet OAM
The following table (Table 5-14) lists the ethernet attributes that are supported on DragonWave devices
in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Horizon Quantum

Attribute

Horizon Compact Plus

Ethernet OAM Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2


and 3.7.3

Horizon Compact

Table 5-15

IMO NameIOAMData

adminState

linkFaultAction

dyingGaspAction

criticalEventAction

mode

unidirectional

linkMonitor

remoteLoopback

portStatus

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-7

Chapter 5

Support Information for DragonWave Devices

Supported Technologies on DragonWave Devices

Horizon Quantum

Attribute

Horizon Compact Plus

Ethernet OAM Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2


and 3.7.3 (Continued)

Horizon Compact

Table 5-15

loopbackStatus

remoteData

name

ethernetPort

IMO NameIOAMRemoteData

macAddress

mode

unidirection

linkMonitor

remoteLoopback

Hardware
Table 5-16 lists the hardware attributes that are supported on DragonWave devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Horizon Compact Plus

Attribute

Horizon Quantum

Hardware Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and


3.7.3

Horizon Compact

Table 5-16

IMO NameIChassis

Description

Y Y Y

Serial Number

Y Y Y

IMO NameIModule

Module Name

Y Y Y

Module Description

Y Y Y

Software Version

Y Y Y

Hardware Type

Y Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-8

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


Supported Technologies on DragonWave Devices

Horizon Compact Plus

Horizon Quantum

Hardware Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and


3.7.3 (Continued)

Attribute

Horizon Compact

Table 5-16

Hardware Type & Version

Y Y Y

Radio Description (Soft


Property)

Radio Oper Status (Soft


Property)

Radio Transmit Power (Soft


Property)

Radio Power Option (Soft


Property)

Radio Actual Transmit Power


(Soft Property)

Antenna1Tilt (Soft Property)

Antenna2Tilt (Soft Property)

IMO NameIManagedElement

IP Address

Y Y Y

Communication State

Y Y Y

Investigation State

Y Y Y

Element Category

Y Y Y

Element Type and Key

Y Y Y

Device Name

Y Y Y

System Name

Y Y Y

System Description

Y Y Y

Up Time

Y Y Y

Software Version

Y Y Y

Vendor Identity

Y Y Y

Sys Contact

Y Y Y

Sys Location

Y Y Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-9

Chapter 5

Support Information for DragonWave Devices

Supported Technologies on DragonWave Devices

Serial
Table 5-17 lists the serial attributes that are supported on DragonWave devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Horizon Quantum

Attribute

Horizon Compact Plus

Serial Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and 3.7.3

Horizon Compact

Table 5-17

IMO NameIPhysicalLayer

Media Type

Y Y Y

Maximum Speed

Y Y Y

Is Internal Port

Administrative Status

Y Y Y

Operational Status

Y Y Y

IANA Type

Y Y Y

Port Alias

Y Y Y

Location

Y Y Y

Connector Description

Y Y Y

Status

Y Y Y

Managed

Y Y Y

Generic Port
The following table (Table 5-18) lists the generic port attributes that are supported on DragonWave
devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Horizon Quantum

Attribute

Horizon Compact Plus

Generic Port Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and
3.7.3

Horizon Compact

Table 5-18

IMO NameIDataLinkLayer

Modem Channelized RSL (Soft


Property)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-10

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


Supported Technologies on DragonWave Devices

Horizon Quantum

Attribute

Horizon Compact Plus

Generic Port Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and
3.7.3 (Continued)

Horizon Compact

Table 5-18

Modem Modulation Type (Soft


Property)

ModemSNR (Soft Property)

Modem Eb To Noise Ratio (Soft Y


Property)

ModemRxBlocksOK (soft
property)

ModemRxBlocksError (soft
property)

Modem Equalizer Stress (Soft


Property)

RadioTransmitPower (soft
property)

RadioOperStatus (soft property) Y

RadioTemperature (soft
property)

RadioProgrammedAntennaDiam Y
eter (soft property)

ModemRxFramesOK (soft
property)

ModemRxFramesError (soft
property)

Associated Radio

Associated Radio Index

RadioDescription (soft
property)

RadioActualTransmitPower
(soft property)

Local Switching
The following table (Table 5-19) lists the local switching attributes that are supported on DragonWave
devices in Cisco ANA Version 3.7.2 and 3.7.3 per technology:

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-11

Chapter 5

Support Information for DragonWave Devices

Supported Technologies on DragonWave Devices

Horizon Compact Plus

Attribute

Horizon Quantum

Local Switching Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2


and 3.7.3

Horizon Compact

Table 5-19

IMO NameILocalSwitchingEntry

Local Switching Entry Key

Y Y Y

Local Switching Entry Status

Y Y Y

Segment 1

Y Y Y

Segment 1 Port Name

Y Y Y

Segment 1 Status

Y Y Y

Segment 2

Y Y Y

Segment 2 Port Name

Y Y Y

Segment 2 Status

Y Y Y

LLDP
The following table (Table 5-20) lists the LLDP attributes that are supported on DragonWave devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:
LLDP Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and 3.7.3

Attribute

Horizon Compact Plus

Table 5-20

IMO NameILLDPService

Status

LldpAdvertisementsInterval

LldpHoldTime

LldpReinitialisationDelay

LocalChassisID

LocalSystemName

IMO NameILLDPNeighbor

LocalPortName

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-12

OL-24429-01

Chapter 5

Support Information for DragonWave Devices


Supported Technologies on DragonWave Devices

LLDP Attribute Support on DragonWave DevicesCisco ANA Version 3.7.2 and 3.7.3

Attribute

Horizon Compact Plus

Table 5-20

RemotePortDesc

RemoteChassisId

LocalPortId

RemotePortId

RemoteSystemName

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

5-13

Chapter 5

Support Information for DragonWave Devices

Supported Technologies on DragonWave Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

5-14

OL-24429-01

CH A P T E R

Support Information for Huawei Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
Huawei devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects and
attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference Guide.
This chapter contains the following topics:

Huawei - Quidway@ S9300 Series Terabit Routing Switch, page 6-1

Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway, page 6-3

Supported Technologies on Huawei Devices, page 6-6

Huawei - Quidway@ S9300 Series Terabit Routing Switch


This section includes the following information about Quidway@S9300 Series devices (for information
on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Huawei - Quidway@ S9300
Series Terabit Routing Switch):
This section contains the following topics:

Quidway@S9300 SeriesSupported Software Versions, page 6-2

Quidway@S9300 SeriesSupported Topologies, page 6-2

Quidway@S9300 SeriesSupported Modules, page 6-2

Quidway@S9300 SeriesSupported Technologies, page 6-3

Quidway@S9300 SeriesSupported Service Events, page 6-3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-1

Chapter 6

Support Information for Huawei Devices

Huawei - Quidway@ S9300 Series Terabit Routing Switch

Quidway@S9300 SeriesSupported Software Versions


Table 6-1

Supported Software Versions for Quidway@S9300 SeriesCisco ANA Version 3.7.2


and 3.7.3

Software Version

ANA Version

DP Version

5.50

3.7.2

3.0

Quidway@S9300 SeriesSupported Topologies


Table 6-2

Supported Topologies for Quidway@S9300 SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

3.0

Quidway@S9300 SeriesSupported Modules


Table 6-3

Supported Modules for Quidway@S9300 SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

Power Module

3.7.2

Power Module

3.0

CMU

3.7.2

CMU manages the power supplies and


fans of the system uniformly.

3.0

LPU

3.7.2

Line Processing Unit

3.0

MPU

3.7.2

Main Processing Unit

3.0

Fan

3.7.2

Fan

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-2

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway

Quidway@S9300 SeriesSupported Technologies


The following technologies are supported by the Juniper M-Series in Cisco ANA Version 3.7.2 and
3.7.3:

IP, page 6-7

Ethernet, page 6-8

Hardware, page 6-8

Serial, page 6-11

Quidway@S9300 SeriesSupported Service Events


Table 6-4

Supported Service Events for JQuidway@S9300 SeriesCisco ANA Version 3.7.2 and
3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link Down

3.7.2

3.0

Link Up

3.7.2

3.0

Huawei - Quidway@ CX600-CarrierSwitch and


ATN-Cellsite-Gateway
This section includes the following information about Quidway@CX600-CarrierSwitch and
ATN-Cellsite-Gateway devices (for information on the NE types supported in Cisco ANA Version 3.7.2
and 3.7.3, see the Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway):
This section contains the following topics:

Quidway@CX600/ATN SeriesSupported Software Versions, page 6-4

Quidway@CX600/ATN SeriesSupported Topologies, page 6-4

Quidway@CX600/ATN SeriesSupported Modules, page 6-4

Quidway@CX600/ATN SeriesSupported Technologies, page 6-6

Quidway@CX600/ATN SeriesSupported Service Events, page 6-6

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-3

Chapter 6

Support Information for Huawei Devices

Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway

Quidway@CX600/ATN SeriesSupported Software Versions


Table 6-5

Supported Software Versions for Quidway@CX600/ATN


SeriesCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

5.90

3.7.2/3.7.3

5.0

Quidway@CX600/ATN SeriesSupported Topologies


Table 6-6

Supported Topologies for Quidway@CX600/ATN SeriesCisco ANA Version 3.7.2 and


3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2/3.7.3

5.0

MPBGP

MPBGP

3.7.2/3.7.3

5.0

L3 VPN

VPN

3.7.2/3.7.3

5.0

Quidway@CX600/ATN SeriesSupported Modules


Table 6-7

Supported Modules for Quidway@CX600/ATN SeriesCisco ANA Version 3.7.2 and


3.7.3

Module Name

ANA
Version

Module Description

DP Version

Power Module

3.7.2/3.7.3

Power Module

5.0

Fan

3.7.2/3.7.3

Fan

5.0

CR53LPUF

3.7.2/3.7.3

CX600,CR53LPUFC0,Flexible Card
Line Processing Unit(LPUF-10,four
slots)

5.0

CR52LPUN

3.7.2/3.7.3

CX600,CR52LPUF40A,Flexible Card
Line Processing Unit(LPUF-40,2
sub-slots) A (L3VPN,MVPN,IPv6
Enhanced)

5.0

CR52EEGFNB

3.7.2/3.7.3

20-Port 100/1000Base-X-SFP Flexible


Card A(Supporting 1588v2)

5.0

CR52L2XXNB

3.7.2/3.7.3

2-Port 10GBase LAN/WAN-XFP


Flexible Card A(Supporting 1588v2)

5.0

CR52LPUK

3.7.2/3.7.3

CX600,CX61LPUK31,Flexible Card
Line Processing Unit(LPUF-21,2
sub-slots) B

5.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-4

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Huawei - Quidway@ CX600-CarrierSwitch and ATN-Cellsite-Gateway

Table 6-7

Supported Modules for Quidway@CX600/ATN SeriesCisco ANA Version 3.7.2 and


3.7.3 (Continued)

Module Name

ANA
Version

CR56RPUA

Module Description

DP Version

3.7.2/3.7.3

CX600,CX61SRU40A4,Switch and
Route Processing Unit A4(Including
1*2G Memory and 1*1G CF Card)

5.0

CR57FRA40A

3.7.2/3.7.3

CX600,CX61SRU40A4,Switch and
Route Processing Unit A4(Including
1*2G Memory and 1*1G CF Card)

5.0

CR57SFU40B

3.7.2/3.7.3

CX600,CX61SFU40C1,40Gbps Switch
Fabric Unit C

5.0

CX67MPUG

3.7.2/3.7.3

CX600,CX67MPUG0,Main Processing
Unit G(Including 1*1G CF Card)

5.0

CX67L2XX

3.7.2/3.7.3

CX67DE1A0

3.7.2/3.7.3

16-Port E1(120ohm) Flexible Interface


Card (FIC)

CX67E8GFA

3.7.2/3.7.3

8-Port 100/1000Base-X-SFP High-speed 5.0


Interface Card A (HIC, Supporting
1588v2)

CX67NPUI

3.7.2/3.7.3

CX600,CX67NPUI20,Network
Processing Unit Integrated with 2-Port
10GBase LAN/WAN-XFP

5.0

CX67E8FE

3.7.2/3.7.3

8-Port 100Base-RJ45 Flexible Interface


Card (FIC, Supporting 1588v2)

5.0

CX67C1CF0

3.7.2/3.7.3

1-Port Channelized OC3c/STM1c


POS-SFP Flexible Interface Card (FIC)

5.0

AND1CXP

3.7.2/3.7.3

TND1CXP,System
Control,Cross-connect and
Multi-protocol Process Unit,1*1

5.0

AND1EG4F

3.7.2/3.7.3

AND1MD1B

3.7.2/3.7.3

TND1MD1B,32 Channels E1 Interface


Board(120ohm) ,1*1

5.0

AND1EF8T

3.7.2/3.7.3

TND1EF8T, 8 Channels Fast Ethernet


Electric Interface Board,1*1

5.0

CXP

3.7.2/3.7.3

TND1CXP,System
Control,Cross-connect and
Multi-protocol Process Unit,1*1

5.0

ANC1CXPH

3.7.2/3.7.3

ANC1CXPH,System
Control,Cross-connect and
Multi-protocol Process
Unit(120ohm),1*1

5.0

AND1VIRCARD

3.7.2/3.7.3

AND1EG2

3.7.2/3.7.3

5.0
5.0

5.0

5.0
ATN

5.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-5

Chapter 6

Support Information for Huawei Devices

Supported Technologies on Huawei Devices

Quidway@CX600/ATN SeriesSupported Technologies


The following technologies are supported by the Quidway@CX600/ATN Series in
Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 6-7

Ethernet, page 6-8

Hardware, page 6-8

Routing Protocols, page 6-9

Serial, page 6-11

LLDP, page 6-11

VPN (VRF), page 6-12

Quidway@CX600/ATN SeriesSupported Service Events


Table 6-8

Supported Service Events for Quidway@CX600/ATN SeriesCisco ANA Version 3.7.2


and 3.7.3

Event Name

ANA Version

DP
Expedited Version

Link Down

3.7.2/3.7.3

5.0

Link Up

3.7.2/3.7.3

5.0

Supported Technologies on Huawei Devices


The following sections list the objects and attributes that are supported on Huawei devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:
This section contains the following topics:

IP, page 6-7

Ethernet, page 6-8

Hardware, page 6-8

Routing Protocols, page 6-9

Serial, page 6-11

LLDP, page 6-11

VPN (VRF), page 6-12

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-6

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Supported Technologies on Huawei Devices

IP

Attribute

CX600 and ATN

IP Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-9

IMO NameIIPInterface

IP Address

Subnetwork Mask

Interface Name

IP Interface State

Routing Table

ARP Entity

Name

Logical Sons

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

Name

IP Address

MAC Address

IMO NameIRoutingEntity

IMO NameIRoutingEntry

IMO NameIARPEntity

ARP Table
IMO NameIARPEntry

Port
Entity Type

Y
Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-7

Chapter 6

Support Information for Huawei Devices

Supported Technologies on Huawei Devices

Ethernet

Attribute

CX600 and ATN

Ethernet Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-10

IMO NameIEthernet

MAC Address

Y Y

Hardware

Attribute

CX600 and ATN

Hardware Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-11

IMO NameIChassis

Description

Y Y

Equipment Holder Type

Y Y

Serial Number

Y Y

IMO NameIModule

Module Name

Y Y

Module Description

Y Y

Software Version

Y Y

Hardware Type + Version

Y Y

Serial Number (soft property)

Y Y

Fan Description

Hardware version

Power Supply Description

Hardware version

IMO NameIManagedElement

IP Address

Y Y

Communication State

Y Y

Investigation State

Y Y

Element Category

Y Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-8

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Supported Technologies on Huawei Devices

CX600 and ATN

Hardware Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

Attribute

S9300-Series

Table 6-11

Element Type and Key

Y Y

Device Name

Y Y

System Name

Y Y

System Description

Y Y

Up Time

Y Y

Software Version

Y Y

Vendor Identity

Y Y

Routing Protocols

Attribute

CX600 and ATN

Routing Protocols Attribute Support on Huawei DevicesCisco ANA Version 3.7.2


and 3.7.3

S9300-Series

Table 6-12

IMO NameIIBgpNeighborEntry

Remote Identifier

Remote Address

Remote Autonomous System

Peer State

Hold Time

Keep Alive Time

VrfName

Address family

IMO NameIIOspfProcess

Process Id

OSPF Version

Router Id

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-9

Chapter 6

Support Information for Huawei Devices

Supported Technologies on Huawei Devices

Attribute

CX600 and ATN

Routing Protocols Attribute Support on Huawei DevicesCisco ANA Version 3.7.2


and 3.7.3 (Continued)

S9300-Series

Table 6-12

IMO NameIOspfNeighbor

Neighbor Id

Outgoing Interface

State

Neighbor Interface Address

Area Id

IMO NameIIOspfInterface

Area Id

Network Type

Cost

State

Interface Address

Interface name

Type

IF Proirity

DR Id

BDR Id

IMO NameISpfTimers

Schedule Delay

Min Hold Time

Max Wait Time

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-10

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Supported Technologies on Huawei Devices

Serial

Attribute

CX600 and ATN

Serial Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-13

IMO NameIPhysicalLayer

Media Type

Y Y

Maximum Speed

Y Y

Is Internal Port

Y Y

Discarded and Received Input


Data Counters

Y Y

Dropped and Forward Output


Data Counters

Y Y

Administrative Status

Y Y

Operational Status

Y Y

Last Changed

Y Y

IANA Type

Y Y

LLDP

Attribute

CX600 and ATN

LLDP Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-14

IMO NameILLDPService

status

lldpAdvertisementsInterval

lldpHoldTime

lldpReinitialisationDelay

localChassisID

localSystemName

IMO NameILLDPNeighbor

localPortName

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-11

Chapter 6

Support Information for Huawei Devices

Supported Technologies on Huawei Devices

Attribute

CX600 and ATN

LLDP Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-14

remotePortDesc

remoteChassisId

remoteManagementIP

localPortId

remotePortId

remoteSystemName

VPN (VRF)

Attribute

CX600 and ATN

VPN (VRF) Attribute Support on Huawei DevicesCisco ANA Version 3.7.2 and 3.7.3

S9300-Series

Table 6-15

IMO NameIVrf

Virtual Routing Table

Exported Route Targets

Imported Route Targets

Route Distinguisher

Name

IMO NameIVrfEntry

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IMO NameIMpBgp

BGP Identifier

Local Autonomous System

BGP Neighbors

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-12

OL-24429-01

Chapter 6

Support Information for Huawei Devices


Supported Technologies on Huawei Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

6-13

Chapter 6

Support Information for Huawei Devices

Supported Technologies on Huawei Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

6-14

OL-24429-01

CH A P T E R

Support Information for Juniper Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
Juniper devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects and
attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference Guide.
This chapter contains the following topics:

Juniper E-Series ERX Edge Routing Switches, page 7-1

Juniper JCS Control System, page 7-4

Juniper M-Series Multiservice Edge Routers, page 7-6

Juniper MX-Series Ethernet Service Routers, page 7-12

Juniper Netscreen Security Firewall/VPN Device, page 7-17

Juniper T-Series Core Platforms, page 7-19

Supported Technologies on Juniper Devices, page 7-23

Juniper E-Series ERX Edge Routing Switches


This section includes the following information about Juniper E-Series devices (for information on the
NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Juniper E-Series ERX Edge Routing
Switches):
This section contains the following topics:

Juniper E-SeriesSupported Software Versions, page 7-2

Juniper E-SeriesSupported Topologies, page 7-2

Juniper E-SeriesSupported Modules, page 7-2

Juniper E-SeriesSupported Technologies, page 7-3

Juniper E-SeriesSupported Service Events, page 7-3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-1

Chapter 7

Support Information for Juniper Devices

Juniper E-Series ERX Edge Routing Switches

Juniper E-SeriesSupported Software Versions


Table 7-1

Supported Software Versions for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

5.2.4 patch-0.2

3.7.2

3.0

Juniper E-SeriesSupported Topologies


Table 7-2

Supported Topologies for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

3.0

Physical Layer

Physical Layer

3.7.2

3.0

Juniper E-SeriesSupported Modules


Table 7-3

Supported Modules for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

OC3 quad port, ATM

3.7.2

OC-3/STM-1 ATM Line Modules

3.0

System/Route Processor 10G


ECC

3.7.2

System/Route Processor 10G ECC

3.0

Fully Channelized E1

3.7.2

Fully Channelized E1

3.0

Fast Ethernet 8-port

3.7.2

Fast Ethernet 8-port

3.0

Dual Port Fast Ethernet

3.7.2

Dual Port Fast Ethernet

3.0

OC12/STM-4 Packet over


SONET Line Modules

3.7.2

OC12/STM-4 Packet over SONET Line


Modules

3.0

OC-12/STM-4 ATM Line


Modules

3.7.2

OC-12/STM-4 ATM Line Modules

3.0

OC3/STM-1 Packet over


SONET Line Modules

3.7.2

OC3/STM-1 Packet over SONET Line


Modules

3.0

Gigabit Ethernet Line Modules

3.7.2

Gigabit Ethernet Line Modules

3.0

Generic OC3/OC12 POS


(multi-personality)

3.7.2

Generic OC3/OC12 POS


(multi-personality)

3.0

Generic OC3/OC12 ATM


(multi-personality)

3.7.2

Generic OC3/OC12 ATM


(multi-personality)

3.0

Channelized T3 Line Module

3.7.2

Channelized T3 Line Module

3.0

UnChannelized T3

3.7.2

UnChannelized T3

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-2

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper E-Series ERX Edge Routing Switches

Table 7-3

Supported Modules for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

Channelized OC3/STM-1

3.7.2

Channelized OC3/STM-1

3.0

OC48/STM-16 Packet over


SONET Line Modules

3.7.2

OC48/STM-16 Packet over SONET Line 3.0


Modules

T3 ATM (4 ports)

3.7.2

T3 ATM (4 ports)

3.0

T3 Frame (12 ports)

3.7.2

T3 Frame (12 ports)

3.0

E3 ATM

3.7.2

E3 ATM

3.0

E3 Frame (12 ports)

3.7.2

E3 Frame (12 ports)

3.0

Juniper E-SeriesSupported Technologies


The following technologies are supported by the Juniper E-Series in Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 7-24

Routing Protocols, page 7-25

Ethernet, page 7-25

MPLS, page 7-28

VPN (VRF), page 7-30

Hardware, page 7-31

Serial, page 7-32

Juniper E-SeriesSupported Service Events


Table 7-4

Supported Service Events for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2

3.0

All IP Interfaces Down

3.7.2

3.0

BGP process up

3.7.2

3.0

Card Down

3.7.2

3.0

Card In

3.7.2

3.0

Card Out

3.7.2

3.0

Card Up

3.7.2

3.0

Cloud Problem

3.7.2

3.0

CPU utilization exceeded upper


threshold

3.7.2

3.0

Device Unreachable

3.7.2

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-3

Chapter 7

Support Information for Juniper Devices

Juniper JCS Control System

Table 7-4

Supported Service Events for Juniper E-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Device Unsupported

3.7.2

3.0

Interface status down flapping

3.7.2

3.0

Interface status down flapping update 3.7.2

3.0

Keepalive configured

3.7.2

3.0

Keepalive not configured

3.7.2

3.0

Layer 2 Tunnel Down

3.7.2

3.0

Link Down

3.7.2

3.0

Link up

3.7.2

3.0

Memory utilization exceeded upper


threshold

3.7.2

3.0

Module Unsupported

3.7.2

3.0

Port Down

3.7.2

3.0

Port Flapping

3.7.2

3.0

Rx utilization exceeded upper


threshold

3.7.2

3.0

Tx utilization exceeded upper


threshold

3.7.2

3.0

VPN Leak

3.7.2

3.0

Juniper JCS Control System


This section includes the following information about Juniper JCS Control Syatem devices (for
information on the NE types supported in Cisco ANA Version 3.7.2/3.7.3, see the Juniper JCS Control
System):
This section contains the following topics:

Juniper JCSSupported Software Versions, page 7-5

Juniper JCSSupported Topologies, page 7-5

Juniper JCSSupported Modules, page 7-5

Juniper JCSSupported Technologies, page 7-5

Juniper JCSSupported Service Events, page 7-6

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-4

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper JCS Control System

Juniper JCSSupported Software Versions


Table 7-5

Supported Software Versions for Juniper JCSCisco ANA Version 3.7.2/3.7.3

Software Version

ANA Version

DP Version

10.0R3.10

3.7.2/3.7.3

6.0

10.0S8.2

3.7.2/3.7.3

6.0

Juniper JCSSupported Topologies


Table 7-6

Supported Topologies for Juniper JCSCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Version

Ethernet

3.7.2/3.7.
3

6.0

Physical Layer

3.7.2/3.7.
3

6.0

Topology Type

Link Type

Ethernet
Physical Layer

Juniper JCSSupported Modules


Table 7-7

Supported Modules for Juniper JCSCisco ANA Version 3.7.2/3.7.3

Module Name

ANA
Version

Module Description

DP Version

Mid Plane

3.7.2/3.7.
31

Midplane

6.0

Routing Engine

3.7.2/3.7.
3

Routing engine

6.0

PCMCIA card

3.7.2/3.7.
3

Blade Bay data

6.0

1,

The midplane is a panel located in the center of the chassis, running from side to side and forming the rear of the PIC card cage.
All router components plug directly into the midplane. This means the midplane is just a holder for the PICs inside the chassis.
If the midplane for Juniper VNEs in ANA is not supported, a "device unsupported" alarm is generated. The midplane for
Juniper VNEs will not be displayed in the Network Vision GUI.

Juniper JCSSupported Technologies


The following technologies are supported by the Juniper JCS in Cisco ANA Version 3.7.2/3.7.3:

IP, page 7-24

Routing Protocols, page 7-25

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-5

Chapter 7

Support Information for Juniper Devices

Juniper M-Series Multiservice Edge Routers

Ethernet, page 7-25

Hardware, page 7-31

BFD, page 7-34

Juniper JCSSupported Service Events


Table 7-8

Supported Service Events for Juniper JCSCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2/3.7.
3

8.0

All IP Interfaces Down

3.7.2/3.7.
3

8.0

Link Down

3.7.2/3.7.
3

8.0

Link Up

3.7.2/3.7.
3

8.0

Event Name

Juniper M-Series Multiservice Edge Routers


This section includes the following information about Juniper M-Series devices (for information on the
NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Juniper M-Series Multiservice Edge
Routers):
This section contains the following topics:

Juniper M-SeriesSupported Software Versions, page 7-6

Juniper M-SeriesSupported Topologies, page 7-7

Juniper M-SeriesSupported Modules, page 7-7

Juniper M-SeriesSupported Technologies, page 7-11

Juniper M-SeriesSupported Service Events, page 7-11

Juniper M-SeriesSupported Software Versions


Table 7-9

Supported Software Versions for Juniper M-SeriesCisco ANA Version 3.7.2 and
3.7.3

Software Version

ANA Version

DP Version

7.1R2.2

3.7.2

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-6

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper M-Series Multiservice Edge Routers

Table 7-9

Supported Software Versions for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

Software Version

ANA Version

DP Version

7.6 R3.6

3.7.2

1.0

7.6 R4.2

3.7.2

1.0

7.6 R4.3

3.7.2

1.0

8.1R2.4

3.7.2

1.0

8.1R4.3

3.7.2

1.0

8.2R3.5

3.7.2

1.0

8.2R3.6

3.7.2

1.0

8.1R4.3

3.7.2

1.0

9.0R1.10

3.7.2

1.0

9.3S2

3.7.2

1.0

Juniper M-SeriesSupported Topologies


Table 7-10

Supported Topologies for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

1.0

Juniper M-SeriesSupported Modules


Table 7-11

Supported Modules for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

CB

3.7.2

Control Board

1.0

CFEB INTERNET
PROCESSOR II

3.7.2

Fuse Module

1.0

CIP

3.7.2

Connector Interface Pannel

1.0

FPC: M320 FPC TYPE 1

3.7.2

Flexible PIC Concentrators

1.0

FPM GBUS

3.7.2

Fuse Module

1.0

JNXCBD

3.7.2

CBD

1.0

JNXFAN

3.7.2

Fan

1.0

JNXFPB

3.7.2

FPB

1.0

JNXFPC

3.7.2

FPC

1.0

JNXHM

3.7.2

HM

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-7

Chapter 7

Support Information for Juniper Devices

Juniper M-Series Multiservice Edge Routers

Table 7-11

Supported Modules for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

JNXPICTYPE3TENPORTGIGE 3.7.2
THER

PIC: 10x 1GE(LAN), 1000 BASE

1.0

JNXPOWER

3.7.2

Power Supply

1.0

M10I HCM

3.7.2

M10i High-Availability Chassis Manager 1.0


1

M10i Midplane

1.0

3.7.2

Juniper Networks Flexible PIC


Concentrator FPC2 - expansion module

1.0

M320MIDPLANE

3.7.22

M320 Midplane

1.0

MEM-FPC-512-S

3.7.2

Optional FPC Memory Upgrade

1.0

PB-1GE-SFP-QPP

3.7.2

1 PORT GIGABIT ETHERNET IQ PIC


(USES SFP OPTICS MODULES - SEE
INTERFACE ACCESSORIES
SECTION)

1.0

PB-2GE-SFP-QPP

3.7.2

2-Port Gigabit Ethernet Services PIC


with QPP

1.0

PB-2GE-SFP-QPP

3.7.2

2-Port Gigabit Ethernet IQ PIC (Uses


SFP Optics Modules

1.0

PB-2OC3-ATM2-SMIR

3.7.2

2-PORT OC-3/STM1 ATM SERVICES


PIC, SINGLE MODE, IR (WITH DIFF.
SERV)

1.0

PB-4CHDS3-QPP

3.7.2

4-Port Channelized DS3 to DS0 Services 1.0


PIC with QPP, BNC

PB-4GE-SFP

3.7.2

Juniper Networks expansion module

1.0

PB-4GE-SFP

3.7.2

4-Port Gigabit Ethernet PIC (Requires


pluggable SFP Optics Modules:
SFP-1GE-SX, SFP-1GE-LX,
SFP-1GE-LH, or SFP-1GE-T - See
Interface Accessories section)

1.0

PB-4OC3-SON-SMIR

3.7.2

4-Port SONET/SDH OC3/STM-1 PIC,


SingleMode IR, for M160-FPC1

1.0

PC-1XGE-XENPAC

3.7.2

1 PORT 10 GIGABIT Ethernet PIC


M320,T320,T640

1.0

PC-4OC3-SON-SMIR

3.7.2

4-port SONET,SDH OC3,STM1 PIC,


SMIR (For use with T640 and T320
FPC2)

1.0

PC-8GE-TYPE3-SFP-IQ2

3.7.2

8-Port Type3 Gigabit Ethernet IQ2 PIC


(Uses SFP Optics Modules - See
Interface Accessories section)

1.0

PEM

3.7.2

AC/DC Power Supply

1.0

PIC: 10X CHE1 IQ

3.7.2

10 Port Channelized E1 IQ PIC

1.0

M10I MIDPLANE

3.7.2

M320-FPC2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-8

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper M-Series Multiservice Edge Routers

Table 7-11

Supported Modules for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

PIC: 1X 10GE(LAN/WAN) IQ2 3.7.2

1Port 10-Gigabit Ethernet IQ2 PIC with


XFP

1.0

PIC: 1X CHSTM1 IQ SDH,


SMIR

3.7.2

1 Port Channelized STM1 IQ PIC

1.0

PIC: 1X G/E IQ, 1000 BASE

3.7.2

1 Port Gigabit Ethernet IQ PIC with SFP 1.0

PIC: 1X G/E, 1000 BASE

3.7.2

1 Port Gigabit Ethernet PIC with SFP

PIC: 1X G/E, 1000 BASE-SX

3.7.2

1 Port Gigabit Ethernet IQ PIC with SFP 1.0

PIC: 1X OC-12 SONET, SMIR

3.7.2

1 Port SONET/SDH OC12c/STM4 PIC

PIC: 1X OC-48 SONET SFP

3.7.2

1 Port SONET/SDH OC48c/STM16 PIC 1.0


with SFP

PIC: 1X STM-16 SDH, SMSR

3.7.2

1 Port STM16 PIC with SFP

1.0

PIC: 1X STM-4 SDH, MM

3.7.2

1 Port SONET/SDH OC12c/STM4 PIC

1.0

PIC: 1X TUNNEL

3.7.2

Tunnel Services PIC

1.0

PIC: 2X OC-3 ATM-II IQ, SMIR 3.7.2

2 Port ATM2 OC3/STM1 IQ PIC

1.0

PIC: 2X T3

3.7.2

2 Port T3 PIC

1.0

PIC: 4X CHDS3 IQ

3.7.2

4 Port Channelized DS3 IQ PIC

1.0

PIC: 4X E1, RJ48

3.7.2

4-Port E1 with RJ48 connectors

1.0

PIC: 4X E3 IQ

3.7.2

4 Port E3 IQ PIC

1.0

PIC: 4X F/E, 100 BASE-TX

3.7.2

4 100Base-TX ports Fast Ethernet PICs

1.0

PIC: 4X STM-1 SDH, SMIR

3.7.2

4 Port SONET/SDH OC3c/STM1 PIC

1.0

PIC: 4X STM-4 SDH, SMIR

3.7.2

4 Port SONET/SDH OC12c/STM4 PIC

1.0

PIC: ADAPTIVE SERVICES-II 3.7.2

Physical Interface Card

1.0

RE-1600-2048-BB

3.7.2

Juniper M-Series routing engine with


1.0
1600MHz panel and 2GB memory - Base
Bundle

ROUTING ENGINE 0

3.7.2

Routing Engine

1.0

SFP-1GE-LX

3.7.2

Small Form Factor Pluggable


1000Base-LX Gigabit Ethernet Optic
Module

1.0

SIB

3.7.2

Switch Interface Board

1.0

TOP FAN

3.7.2

Fan Module

1.0

XENPAK-1XGE-LR

3.7.2

Juniper Networks transceiver module

1.0

JNXM20FPC

3.7.2/3.7.
3

FPC

4.0

JNXM20FAN

3.7.2/3.7.
3

Fan Tray - M20

4.0

JNXM20SSB

3.7.2/3.7.
3

SSB

4.0

1.0
1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-9

Chapter 7

Support Information for Juniper Devices

Juniper M-Series Multiservice Edge Routers

Table 7-11

Supported Modules for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

JNXBACKPLANEM20

3.7.2/3.7.
3

Backplane

4.0

JNXM20RE

3.7.2/3.7.
3

Routing Engine 0

4.0

JNXM20POWER

3.7.2/3.7.
3

PEM

4.0

JNXM20FRONTPANEL

3.7.2/3.7.
3

Front Panel

4.0

JNXM40EFPC

3.7.2/3.7.
3

FPC

4.0

JNXM40EFan

3.7.2/3.7.
3

Fan Tray - M40e

4.0

JNXM40ESFM

3.7.2/3.7.
3

SFM

4.0

JNXMIDPLANEM40e

3.7.2/3.7.
3

Midplane

4.0

JNXM40EHM

3.7.2/3.7.
3

Routing Engine 0

4.0

JNXM40EPOWER

3.7.2/3.7.
3

PEM

4.0

JNXM40EPCG

3.7.2/3.7.
3

PCG

4.0

JNXM40EMCS

3.7.2/3.7.
3

MCS

4.0

JNXM40EFPM

3.7.2/3.7.
3

FPM

4.0

JNXM40ECIP

3.7.2/3.7.
3

CIP

4.0

JNXM120FEB

3.7.2/3.7.
3

FEB

4.0

PIC: 4x OC-3 SONET SMIR

3.7.2/3.7.
3

4 Port SONET/SDH OC3/STM4 PIC

6.0

PIC: ASP - Integrated

3.7.2/3.7.
3

PIC: ASP - Integrated

6.0

PIC: 2x F/E, 100 BASE-TX

3.7.2/3.7.
3

2 Port Fast Ethernet PIC with SFP

6.0

M7i Midplane

3.7.2/3.7.
3

M7i Midplane

6.0

PIC: 2x CHSTM-1 IQE SDH

3.7.2/3.7.
3

2 Port Channelized STM PIC

7.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-10

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper M-Series Multiservice Edge Routers

1, 2

The midplane is a panel located in the center of the chassis, running from side to side and forming the rear of the PIC card cage.
All router components plug directly into the midplane. This means the midplane is just a holder for the PICs inside the chassis.
If the midplane for Juniper VNEs in ANA is not supported, a "device unsupported" alarm is generated. The midplane for
Juniper VNEs will not be displayed in the Network Vision GUI.

Juniper M-SeriesSupported Technologies


The following technologies are supported by the Juniper M-Series in Cisco ANA Version 3.7.2 and
3.7.3:

IP, page 7-24

Routing Protocols, page 7-25

Ethernet, page 7-25

ATM, page 7-26

Frame Relay, page 7-27

PPP, page 7-28

HDLC, page 7-28

MPLS, page 7-28

VPN (VRF), page 7-30

Hardware, page 7-31

Serial, page 7-32

Juniper M-SeriesSupported Service Events


Table 7-12

Supported Service Events for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Active IP Interfaces Found

3.7.2

1.0

All IP Interfaces Down

3.7.2

1.0

BGP process up

3.7.2

1.0

Card Down

3.7.2

1.0

Card In

3.7.2

1.0

Card Out

3.7.2

1.0

Card Up

3.7.2

1.0

Cloud Problem

3.7.2

1.0

CPU utilization exceeded upper


threshold

3.7.2

1.0

Device Unreachable

3.7.2

1.0

Device Unsupported

3.7.2

1.0

Interface status down flapping

3.7.2

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-11

Chapter 7

Support Information for Juniper Devices

Juniper MX-Series Ethernet Service Routers

Table 7-12

Supported Service Events for Juniper M-SeriesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

ANA
Version

Event Name

DP
Expedited Version

Interface status down flapping update 3.7.2

1.0

Keepalive configured

3.7.2

1.0

Keepalive not configured

3.7.2

1.0

Layer 2 Tunnel Down

3.7.2

1.0

Link Down

3.7.2

1.0

Link up

3.7.2

1.0

Memory utilization exceeded upper


threshold

3.7.2

1.0

Module Unsupported

3.7.2

1.0

Port Down

3.7.2

1.0

Port Flapping

3.7.2

1.0

Rx utilization exceeded upper


threshold

3.7.2

1.0

Tx utilization exceeded upper


threshold

3.7.2

1.0

VPN Leak

3.7.2

1.0

Juniper MX-Series Ethernet Service Routers


This section includes the following information about Juniper MX-Series devices (for information on
the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Juniper MX-Series Ethernet
Service Routers):
This section contains the following topics:

Juniper MX-SeriesSupported Software Versions, page 7-13

Juniper MX-SeriesSupported Topologies, page 7-13

Juniper MX-SeriesSupported Modules, page 7-13

Juniper MX-SeriesSupported Technologies, page 7-14

Juniper MX-SeriesSupported Service Events, page 7-14

Juniper MX-SeriesSupported Software Versions


Table 7-13

Supported Software Versions for Juniper MX-SeriesCisco ANA Version 3.7.2 and
3.7.3

Software Version

ANA Version

DP Version

9.2S2

3.7.2

2.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-12

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper MX-Series Ethernet Service Routers

Table 7-13

Supported Software Versions for Juniper MX-SeriesCisco ANA Version 3.7.2 and
3.7.3 (Continued)

Software Version

ANA Version

DP Version

9.2-20081012.0

3.7.2

2.0

9.2R4.4

3.7.2

2.0

10.0S7.1

3.7.2

2.0

9.3R4.4

3.7.2

2.0

Juniper MX-SeriesSupported Topologies


Table 7-14

Supported Topologies for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

2.0

Physical Layer

Physical Layer

3.7.2

2.0

Juniper MX-SeriesSupported Modules


Table 7-15

Supported Modules for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

MX960 Midplane

3.7.2

MX960 Midplane

2.0

FPM Board

3.7.2

MX960 Front Panel Display

2.0

PDM

3.7.2

MX960 Power Distribution Module

2.0

PEM

3.7.2

PS 1.7kW

2.0

200-240VAC in Routing Engine 1 3.7.2

RE-S-2000

2.0

CB

3.7.2

MX SCB (Switch Control Board)

2.0

MX960FPC

3.7.2

DPCE 40x 1GE REQ

2.0

MX960 CPU FPC

3.7.2

DPC 4x 10GE R

2.0

MX960 CPU

3.7.2

DPC PMB

2.0

PIC: 1x10GE(LAN/WAN)

3.7.2

PIC: 1x10GE(LAN/WAN)

2.0

Xcvr 0: XFP-10G-LR

3.7.2

XFP-10G-LR

2.0

Xcvr 0: XFP-10G-SR

3.7.2

XFP-10G-SR

2.0

MX960 FPC 9

3.7.2

DPC 40x 1GE R

2.0

Top Fan Tray

3.7.2

Top Fan Tray

2.0

Bottom Fan Tray

3.7.2

Bottom Fan Tray

2.0

MX480 Midplane

3.7.2

MX480 Midplane

3.0

FPM Board

3.7.2

MX480 Front Panel Display

3.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-13

Chapter 7

Support Information for Juniper Devices

Juniper MX-Series Ethernet Service Routers

Table 7-15

Supported Modules for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

PEM

3.7.2

PEM

3.0

Rear Fan Tray

3.7.2

Rear Fan Tray

3.0

MX240 Midplane

3.7.2/3.7.
3

MX240 Midplane

4.0

Juniper MX-SeriesSupported Technologies


The following technologies are supported by the Juniper MX-Series in Cisco ANA Version 3.7.2 and
3.7.3:

IP, page 7-24

Routing Protocols, page 7-25

Ethernet, page 7-25

ATM, page 7-26

Frame Relay, page 7-27

MPLS, page 7-28

VPN (VRF), page 7-30

Hardware, page 7-31

Serial, page 7-32

Carrier Ethernet, page 7-33

BFD, page 7-34

LLDP, page 7-34

Juniper MX-SeriesSupported Service Events


Table 7-16

Supported Service Events for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3

ANA
Version

DP
Expedited Version

Primary HSRP Interface


Active/Inactive

3.7.2

2.0

Secondary HSRP Interface


Active/Inactive

3.7.2

2.0

All IP Interfaces Down / Active IP


Interfaces Found

3.7.2

2.0

Interface Status Down/Up

3.7.2

2.0

Card In/Out

3.7.2

2.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-14

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper MX-Series Ethernet Service Routers

Table 7-16

Supported Service Events for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

Event Name

ANA
Version

DP
Expedited Version

Link Down/Up

3.7.2

2.0

Device Unreachable

3.7.2

2.0

CPU Over Utilized

3.7.2

2.0

Memory Over Utilized

3.7.2

2.0

Device Unsupported

3.7.2

2.0

Discard Packets

3.7.2

2.0

Dropped Packets

3.7.2

2.0

Module Unsupported

3.7.2

2.0

Port Flapping

3.7.2

2.0

Port Down

3.7.2

2.0

Rx Over Utilized

3.7.2

2.0

Tx Over Utilized

3.7.2

2.0

VPN Leak

3.7.2

2.0

Cloud Problem

3.7.2

2.0

Broken LSP Discovered

3.7.2

2.0

MPLS Black Hole

3.7.2

2.0

Layer 2 Tunnel Down

3.7.2

2.0

MPLS TE Tunnel Down/Flapping

3.7.2

2.0

BGP Neighbor Down

3.7.2

2.0

Card Up/Down

3.7.2

2.0

VSI Up/Down

3.7.2

2.0

VSI Admin Down

3.7.2

2.0

EFP Up/Down

3.7.2

2.0

EFP Admin Down

3.7.2

2.0

EFP down due to error disabled

3.7.2

2.0

Vlan Tagged Interface Up/Down

3.7.2

2.0

Vlan Tagged Interface AdminDown

3.7.2

2.0

DS1 Path Port Down

3.7.2

2.0

DS1 Path Port Up

3.7.2

2.0

DS1 Path link down due to Admin


down

3.7.2

2.0

DS1 Path link down due to Oper down 3.7.2

2.0

DS1 Path link Up

3.7.2

2.0

Sonet Path Port Down

3.7.2

2.0

Sonet Path Port Up

3.7.2

2.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-15

Chapter 7

Support Information for Juniper Devices

Juniper MX-Series Ethernet Service Routers

Table 7-16

Supported Service Events for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

ANA
Version

DP
Expedited Version

Sonet Path link down due to Admin


down

3.7.2

2.0

Sonet Path link down due to Oper


down

3.7.2

2.0

Sonet Path link Up

3.7.2

2.0

MLPPP down due to Admin down

3.7.2

2.0

MLPPP down due to Oper down

3.7.2

2.0

MLPPP Up

3.7.2

2.0

Low priority IMA Down

3.7.2

2.0

Medium priority IMA Down

3.7.2

2.0

High priority IMA Down

3.7.2

2.0

IMA Oper down

3.7.2

2.0

IMA Admin down

3.7.2

2.0

IMA Up

3.7.2

2.0

Keepalive set

3.7.2

2.0

Keepalive not set

3.7.2

2.0

DS0 Bundle Admin down

3.7.2

2.0

DS0 Bundle Oper down

3.7.2

2.0

DS0 Bundle Up

3.7.2

2.0

CFM Domain Fault

3.7.2

2.0

CGN statistics
dropsResourceDepletionIn2Out
higher threshold exceeded

3.7.2

2.0

CGN statistics
dropsSystemLimitIn2Out higher
threshold exceeded

3.7.2

2.0

CGN statistics dropsPortLimitIn2Out


higher threshold exceeded

3.7.2

2.0

CGN statistics fwdOut2In higher


threshold exceeded

3.7.2

2.0

CGN statistics fwdIn2Out higher


threshold exceeded

3.7.2

2.0

LDP neighbor down

3.7.2

2.0

LDP neighbor up

3.7.2

2.0

MPLS interface added

3.7.2

2.0

MPLS interface removed

3.7.2

2.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-16

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper Netscreen Security Firewall/VPN Device

Table 7-16

Supported Service Events for Juniper MX-SeriesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

ANA
Version

DP
Expedited Version

MPLS TE FRR State Changed to


Active

3.7.2

2.0

MPLS TE FRR State Changed to


Ready

3.7.2

2.0

MPLS-TE tunnel reoptimized

3.7.2

2.0

MPLS-TE tunnel rerouted

3.7.2

2.0

MPLS-TE tunnel up

3.7.2

2.0

OSPFneighbor down

3.7.2

2.0

OSPFneighbor up

3.7.2

2.0

Event Name

Juniper Netscreen Security Firewall/VPN Device


This section includes the following information about Juniper Netscreen Security Firewall/VPN devices
(for information on the NE types supported in Cisco ANA Version 3.7.2/3.7.3, see the Juniper Netscreen
Security Firewall/VPN Device):
This section contains the following topics:

Juniper NetScreen Security Firewall/VPN DeviceSupported Software Versions, page 7-17

Juniper NetScreen Security Firewall/VPN DeviceSupported Topologies, page 7-18

Juniper NetScreen Security Firewall/VPN DeviceSupported Modules, page 7-18

Juniper NetScreen Security Firewall/VPN DeviceSupported Technologies, page 7-18

Juniper NetScreen Security Firewall/VPN DeviceSupported Service Events, page 7-19

Juniper NetScreen Security Firewall/VPN DeviceSupported Software


Versions
Table 7-17

Supported Software Versions for Juniper NetScreen Security Firewall/VPN


DeviceCisco ANA Version 3.7.2/3.7.3

Software Version

ANA Version

DP Version

ScreenOS 6.2 revision 2


Cb8

3.7.2/3.7.3

6.0

Screen OS6.3.0revision7.0

3.7.2/3.7.3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-17

Chapter 7

Support Information for Juniper Devices

Juniper Netscreen Security Firewall/VPN Device

Juniper NetScreen Security Firewall/VPN DeviceSupported Topologies


Table 7-18

Supported Topologies for Juniper NetScreen Security Firewall/VPN


DeviceCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Version

Ethernet

3.7.2/3.7.
3

6.0

Physical Layer

3.7.2/3.7.
3

6.0

Topology Type

Link Type

Ethernet
Physical Layer

Juniper NetScreen Security Firewall/VPN DeviceSupported Modules


Table 7-19

Supported Modules for Juniper NetScreen Security Firewall/VPN


DeviceCisco ANA Version 3.7.2/3.7.3

Module Name

ANA
Version

Module Description

DP Version

Fan Tray

3.7.2/3.7.
3

Fan Tray

6.0

5000-MG3

3.7.2/3.7.
3

Management Module 3

6.0

5000-8G2-G4

3.7.2/3.7.
3

8 x GigE Secure Port Module (SPM) includes 8 x transceivers (SX)

6.0

Power Entry Module

3.7.2/3.7.
3

Power supply module

6.0

Juniper NetScreen Security Firewall/VPN DeviceSupported Technologies


The following technologies are supported by the Juniper NetScreen in Cisco ANA Version 3.7.2/3.7.3:

IP, page 7-24

Ethernet, page 7-25

Hardware, page 7-31

Serial, page 7-32

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-18

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper T-Series Core Platforms

Juniper NetScreen Security Firewall/VPN DeviceSupported Service Events


Table 7-20

Supported Service Events for Juniper NetScreen Security Firewall/VPN


DeviceCisco ANA Version 3.7.2/3.7.3

Event Name

ANA
Version

DP
Expedited Version

All IP Interfaces Down / Active IP


Interfaces Found

3.7.2/3.7.
3

6.0

Interface Status Down/Up

3.7.2/3.7.
3

6.0

Card In/Out

3.7.2/3.7.
3

6.0

Link Down/Up

3.7.2/3.7.
3

6.0

Device Unreachable

3.7.2/3.7.
3

6.0

Device Unsupported

3.7.2/3.7.
3

6.0

Module Unsupported

3.7.2/3.7.
3

6.0

Port Down

3.7.2/3.7.
3

6.0

Card Up/Down

3.7.2/3.7.
3

6.0

Juniper T-Series Core Platforms


This section includes the following information about Juniper T-Series devices (for information on the
NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see the Juniper T-Series Core Platforms):
This section contains the following topics:

Juniper T-SeriesSupported Software Versions, page 7-20

Juniper T-SeriesSupported Topologies, page 7-20

Juniper T-SeriesSupported Modules, page 7-20

Juniper T-SeriesSupported Technologies, page 7-22

Juniper T-SeriesSupported Service Events, page 7-22

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-19

Chapter 7

Support Information for Juniper Devices

Juniper T-Series Core Platforms

Juniper T-SeriesSupported Software Versions


Table 7-21

Supported Software Versions for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

8.2R3.6

3.7.2

1.0

7.6R3.6

3.7.2

1.0

8.2R3.5

3.7.2

1.0

9.1R2.10

3.7.2

3.0

9.0R2.10

3.7.2

3.0

Juniper T-SeriesSupported Topologies


Table 7-22

Supported Topologies for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

1.0

Juniper T-SeriesSupported Modules


Table 7-23

Supported Modules for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

CIP-L-T640-S

3.7.2

Connector Interface Panel

1.0

FT-T640

3.7.2

Fan Tray - T640

1.0

MEM-FPC-512-S

3.7.2

512MB DRAM for FPC

1.0

PC-10GE-SFP

3.7.2

PIC: 10x 1GE(LAN), 1000 BASE

1.0

PC-1XGE-XENPAK

3.7.2

PIC, 1-Port 10GE, XENPAK Optics

1.0

PC-8GE-TYPE3-SFP-IQ2

3.7.2

Gigabit Ethernet IQ2, 8-port SFP

1.0

PIC: 1X OC-192 SM SR1

3.7.2

PIC: 1x OC-192 SM SR1

1.0

PIC: 1X TUNNEL

3.7.2

Tunnel Services PIC

1.0

RE-1600-2048-BB

3.7.2

Routing Engine, 1600Mhz, 2048 MB


DRAM

1.0

RE-1600-2048-R

3.7.2

Routing Engine, 1600 Mhz, 2048 MB


DRAM - redundant

1.0

SCG-T

3.7.2

T Series Sonet ClockGenerator

1.0

SCG-T-BB

3.7.2

T640 SONET Clock Generator Board

1.0

SFP-1GE-LH

3.7.2

SFP Pluggable 1000Base-LH GE Optic


Module

1.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-20

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Juniper T-Series Core Platforms

Table 7-23

Supported Modules for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

SFP-1GE-LX

Module Description

DP Version

3.7.2

SFP Pluggable 1000Base-LX GE Optic


Module

1.0

T640-FPC3-E2

3.7.2

FPC: E2-FPC Type 1, FPC: E-FPC Type 1.0


3

XENPAK-1XGE-LR

3.7.2

XENPAK Pluggable 10GBase-LR Optic


Module

1.0

JNXT320FPC

3.7.2

Enhanced II FPC3

3.0

JNXT320Fan

3.7.2

Fan Tray - T320

3.0

JNXT320CIP

3.7.2

Connector Interface Panel

3.0

JNXMidplaneT320

3.7.2

Midplane

3.0

JNXT320FPB

3.7.2

FPM Display

3.0

JNXT320CB

3.7.2

CB 0

3.0

JNXT320SCG

3.7.2

SCG 0

3.0

JNXT320SPMB

3.7.2

SPMB 0

3.0

JNXT320HM

3.7.2

Routing Engine 0

3.0

JNXPCMCIACard

3.7.2

Routing Engine 0 PCMCIA Card 0

3.0

JNXT320Power

3.7.2

PEM

3.0

JNXT320SIB

3.7.2

SIB 0

3.0

PIC: 4x OC-3 SONET

3.7.2

PIC: 4x OC-3 SONET, SMIR @ 0/0/*

3.0

JNXT1600FPC

3.7.2/3.7.
3

Enhanced II FPC3

4.0

JNXT1600Fan

3.7.2/3.7.
3

Fan Tray - T1600

4.0

JNXT1600CIP

3.7.2/3.7.
3

Connector Interface Panel

4.0

JNXMidplaneT1600

3.7.2/3.7.
3

midplane

4.0

JNXT1600FPB

3.7.2/3.7.
3

FPM Display

4.0

JNXT1600CB

3.7.2/3.7.
3

CB 0

4.0

JNXT1600SCG

3.7.2/3.7.
3

SCG 0

4.0

JNXT1600SPMB

3.7.2/3.7.
3

SPMB 0

4.0

JNXT1600HM

3.7.2/3.7.
3

Routing Engine 0

4.0

JNXPCMCIACard

3.7.2/3.7.
3

Routing Engine 0 PCMCIA Card 0

4.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-21

Chapter 7

Support Information for Juniper Devices

Juniper T-Series Core Platforms

Table 7-23

Supported Modules for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

ANA
Version

Module Name

Module Description

DP Version

JNXT1600Power

3.7.2/3.7.
3

PEM

4.0

JNXT1600SIB

3.7.2/3.7.
3

SIB 0

4.0

Juniper T-SeriesSupported Technologies


The following technologies are supported by the Juniper T-Series in Cisco ANA Version 3.7.2 and 3.7.3:

IP, page 7-24

Routing Protocols, page 7-25

Ethernet, page 7-25

ATM, page 7-26

Frame Relay, page 7-27

PPP, page 7-28

HDLC, page 7-28

MPLS, page 7-28

VPN (VRF), page 7-30

Hardware, page 7-31

Serial, page 7-32

Juniper T-SeriesSupported Service Events


Table 7-24

Supported Service Events for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

ANA
Version

DP
Expedited Version

All IP Interfaces Down / Active IP


Interfaces Found

3.7.2

1.0

Interface Status Down/Up

3.7.2

1.0

Card In/Out

3.7.2

1.0

Link Down/Up

3.7.2

1.0

Device Unreachable

3.7.2

1.0

CPU Over Utilized

3.7.2

1.0

Memory Over Utilized

3.7.2

1.0

Device Unsupported

3.7.2

1.0

Discard Packets

3.7.2

1.0

Dropped Packets

3.7.2

1.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-22

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

Table 7-24

Supported Service Events for Juniper T-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Module Unsupported

3.7.2

1.0

Port Flapping

3.7.2

1.0

Port Down

3.7.2

1.0

Rx Over Utilized

3.7.2

1.0

Tx Over Utilized

3.7.2

1.0

VPN Leak

3.7.2

1.0

BGP Neighbor Down

3.7.2

1.0

Card Up/Down

3.7.2

1.0

Supported Technologies on Juniper Devices


The following sections list the objects and attributes that are supported on Juniper devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:
This section contains the following topics:

IP, page 7-24

Routing Protocols, page 7-25

Ethernet, page 7-25

ATM, page 7-26

Frame Relay, page 7-27

PPP, page 7-28

HDLC, page 7-28

MPLS, page 7-28

VPN (VRF), page 7-30

Hardware, page 7-31

Serial, page 7-32

Carrier Ethernet, page 7-33

BFD, page 7-34

LLDP, page 7-34

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-23

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

IP

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

IP Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-25

IMO NameIIPInterface

IP Address

Subnetwork Mask

IP Interface Addresses Array


Interface Name

Y
Y

Interface Description
IP Interface State

Y
Y

Y
Y

IMO NameIRoutingEntity

Routing Table
ARP Entity
Name

Logical Sons

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IMO NameIRoutingEntry

IMO NameIARPEntity

ARP Table
IMO NameIARPEntry

IP Address

MAC Address

Port

Entry Type

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-24

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

Routing Protocols

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Routing Protocols Attribute Support on Juniper DevicesCisco ANA Version 3.7.2


and 3.7.3

E-Series

Table 7-26

IMO NameIBgpNeighborEntry

Remote Identifier

Neighbor Type

Remote Address

Remote Autonomous System

Peer State

Hold Time

Keep Alive Time

Area Identifier

IP Address

Type

Administrative Status

Ospf Entry State

IMO NameIOspfEntry

Ethernet

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Ethernet Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-27

IMO NameIEthernet

MAC Address

Y Y Y

Duplex Mode

Output Flow Control

Input Flow Control

IANA Type

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-25

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

Port Type

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Ethernet Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-27

isElmiEnabled

Y Y

IMO NameIVlanEncapMux

IANA Type

VLAN

IANA Type

IMO NameIIEEE802

ATM

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

ATM Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-28

IMO NameIAtm

Interface Type

VC Table

IANA Type

Tx Allocated Bandwidth

Tx Maximum Bandwidth

Tx UBR Allocated Bandwidth

Tx CBR Allocated Bandwidth

Rx Allocated Bandwidth

Rx Maximum Bandwidth

Rx UBR Allocated Bandwidth

Rx CBR Allocated Bandwidth

Virtual Channel Identifier

Virtual Path Identifier

Administrative Status

IMO NameIAtmVc

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-26

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

Operational Status

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

ATM Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-28

Frame Relay

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Frame Relay Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and
3.7.3

E-Series

Table 7-29

IMO NameIframerelay/IFrTrunk

Protocol Type

VC Table

Data Link Connection Identifier

Administrative Status

Operational Status

IMO NameIFrVc

IMO NameIEncapsulation

Virtual Connection Interface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-27

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

PPP

T-Series

NetScreen-Series

MX-Series

JCS

Attribute

M-Series

PPP Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-30

IMO NameIVcBasedEncapsulation

Virtual Connection

HDLC

T-Series

NetScreen-Series

MX-Series

JCS

Attribute

M-Series

HDLC Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-31

IMO NameIencapsulation (HDLC/PPP)

Virtual Connection

MPLS

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

MPLS Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-32

IMO NameIMpls

Distribution Protocol

Outer and Inner Labels

Traffic Engineering Properties

Y
Y

IMO NameILse

MPLS Table
MPLS Aggregate Table

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-28

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

MPLS Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-32

MPLS Tunnel Segments

LDP Service

Logical Sons

IMO NameILdpService

Local Identification Status

LDP Peers

Peer Identification

Transport Address

Distribution Method

Protocol Type

Session Status

Hold Time

Keep Alive Time

Peer Discovery Sources

IMO NameILdpPeer

IMO NameILdpDiscoverySource

Interface Name

Source Address

Type

IMO NameIMplsEntry

Incoming Label

Outgoing Interface and Label

Switching Action

Next Hop IP Address

Destination Mask

Destination address

Virtual Routing Entity

Incoming Label

Outgoing Interface and Label

Switching Action

IMO NameIMplsAggregateEntry

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-29

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

VPN (VRF)

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

VPN (VRF) Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-33

IMO NameIVrf

Virtual Routing Table

Exported Route Targets

Imported Route Targets

Route Distinguisher

ARP Entity
Name

IMO NameIVrfEntry

Next Hop BGP Address

Incoming and Outgoing Inner


Label
Outer Label
Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IMO NameIMpBgp

BGP Identifier

Local Autonomous System

BGP Neighbors

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-30

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

Hardware

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Hardware Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-34

IMO NameIChassis

Description
Equipment Holder Type

Y Y Y

Y Y Y

Serial Number

Y Y

IMO NameIShelf

Equipment Holder Type

Module Name

Y Y Y

Module Description

Y Y Y

Operational Status

Y Y Y

Hardware Type + Version

IMO NameIModule

Operational Status Last Changed


Serial Number (soft property)

Y
Y

Y Y Y

IP Address

Y Y Y

Communication State

Y Y Y

Investigation State

Y Y Y

Element Category

Y Y Y

Element Type and Key

Y Y Y

Device Name

Y Y Y

System Name

Y Y Y

System Description

Y Y Y

Up Time

Y Y Y

Software Version

Y Y Y

Vendor Identity

Y Y Y

Y Y Y

IMO NameIManagedElement

Memory and CPU Usage


Flash Device Size

Processor DRAM

Sys Contact

Y Y

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-31

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

Sys Location

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Hardware Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3
(Continued)

E-Series

Table 7-34

Y Y

IMO NameIContext

Name

IMO NameIBridge

Bridge Table

Type

MAC Address

IP Interface

Name

Logical Sons

Vlan Type

IMO NameIBridgeEntry

Destination MAC

Outgoing Interface

Serial

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Serial Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-35

IMO NameIPhysicalLayer

Media Type

Clocking Source

Y
Y

Maximum Speed

Is Internal Port

Discarded and Received Input


Data Counters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-32

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Serial Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-35

Dropped and Forward Output


Data Counters

Administrative Status

Operational Status

Last Changed

IANA Type

Port Alias

Location

Sending Alarms

Connector Description

Status

Managed

Carrier Ethernet

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

Carrier Ethernet Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and
3.7.3

E-Series

Table 7-36

IMO NameIVsi

vsiInstanceName

vpnId

discoveryMode

vsiMode

Operational state

Administrative state

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-33

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

BFD

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

BFD Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-37

IMO NameIBfdSession

SourceIp

Y Y

DestinationIp

Y Y

Interval

Y Y

Multiplier

Y Y

Protocol

Y Y

State

Y Y

Interface

Y Y

LLDP

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

LLDP Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-38

IMO NameILLDPService

Status

LLDPAdvertisementsInterval

LLDPHoldTime

LLDPReinitialisationDelay

LocalChassisID

LocalSystemName

IMO NameILLDPNeighbor

LocalPortName

RemotePortDesc

RemoteChassisId

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-34

OL-24429-01

Chapter 7

Support Information for Juniper Devices


Supported Technologies on Juniper Devices

RemoteManagementIP

LocalPortId

RemotePortId

RemoteSystemName

T-Series

NetScreen-Series

MX-Series

M-Series

Attribute

JCS

LLDP Attribute Support on Juniper DevicesCisco ANA Version 3.7.2 and 3.7.3

E-Series

Table 7-38

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

7-35

Chapter 7

Support Information for Juniper Devices

Supported Technologies on Juniper Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

7-36

OL-24429-01

CH A P T E R

Support Information for RAD Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
RAD devices in Cisco ANA Version 3.7.2 and 3.7.3. For more information about the objects and
attributes described in this chapter, see the Cisco Active Network Abstraction 3.7.2 Reference Guide.
This chapter contains the following topics:

RAD ACE-3000 Cell-Site Gateway, page 8-1

RAD ETX-Series Carrier Ethernet Demarcation Device, page 8-3

RAD IPmux-4L TDM Pseudowire Access Gateway, page 8-4

RAD LA-210 EFM DSL Network Termination Unit, page 8-5

Supported Technologies on RAD Devices, page 8-7

RAD ACE-3000 Cell-Site Gateway


This section includes the following information about RAD ACE-3000 Cell-Site Gateway devices (for
information on the NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see RAD ACE-3000
Cell-Site Gateway):

RAD ACE CSG-SeriesSupported Software Versions, page 8-1

RAD ACE CSG-SeriesSupported Topologies, page 8-2

RAD ACE CSG-SeriesSupported Modules, page 8-2

RAD ACE CSG-SeriesSupported Technologies, page 8-2

RAD ACE CSG-SeriesSupported Service Events, page 8-3

RAD ACE CSG-SeriesSupported Software Versions


Table 8-1

Supported Software Versions for RAD CSG-SeriesCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

RadOS V5.4

3.7.2

2.0

RadOS V6.1

3.7.2

2.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-1

Chapter 8

Support Information for RAD Devices

RAD ACE-3000 Cell-Site Gateway

RAD ACE CSG-SeriesSupported Topologies


Table 8-2

Supported Topologies for RAD CSG-SeriesCisco ANA Version 3.7.2 and 3.7.3

Topology Type

Link Type

ANA
Version

DP
Version

Ethernet

Ethernet

3.7.2

1.0

ATM

ATM

3.7.2

2.0

ATM

PNNI

3.7.2

2.0

MPLS

MPLS

3.7.2

2.0

PWE3 (Martini)

Tunnel

3.7.2

2.0

GRE Tunnel

GRE Tunnel

3.7.2

2.0

Physical Layer

Physical Layer

3.7.2

2.0

RAD ACE CSG-SeriesSupported Modules


Table 8-3

Supported Modules for RAD CSG-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

DP Version

ACE-3205

3.7.2

Cell-Site Gateway

1.0

ACE-3105

3.7.2

Cell-Site Gateway

2.0

ACE-3100

3.7.2/3.7.
3

Cell-Site Gateway

4.0

ACE-3200

3.7.2/3.7.
3

Cell-Site Gateway

4.0

RAD ACE CSG-SeriesSupported Technologies


The following technologies are supported by the RAD CSG-Series in Cisco ANA Version 3.7.2 and
3.7.3:

IP, page 8-7

Ethernet (IEEE 802.3), page 8-9

ATM, page 8-10

DSL, page 8-11

Physical Technologies, page 8-11

MPLS, page 8-12

PWE3, page 8-13

Hardware, page 8-13

Serial, page 8-14

Additional Technologies, page 8-15

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-2

OL-24429-01

Chapter 8

Support Information for RAD Devices


RAD ETX-Series Carrier Ethernet Demarcation Device

RAD ACE CSG-SeriesSupported Service Events


Table 8-4

Supported Service Events for RAD CSG-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

GRE tunnel down

3.7.2

3.0

GRE tunnel up

3.7.2

3.0

LDP neighbor down

3.7.2

2.0

LDP neighbor up

3.7.2

2.0

Link Down

3.7.2

2.0

Link up

3.7.2

2.0

BFD connectivity down

3.7.2

2.0

BFD connectivity up

3.7.2

2.0

RAD ETX-Series Carrier Ethernet Demarcation Device


This section includes the following information about RAD ETX-Series devices (for information on the
NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see RAD ETX-Series Carrier Ethernet
Demarcation Device):

RAD ETX-SeriesSupported Software Versions, page 8-3

RAD ETX-SeriesSupported Modules, page 8-3

RAD ETX-SeriesSupported Technologies, page 8-4

RAD ETX-SeriesSupported Service Events, page 8-4

RAD ETX-SeriesSupported Software Versions


Table 8-5

Supported Software Versions for RAD ETX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

ETX V2.2

3.7.2

2.0

RAD ETX-SeriesSupported Modules


Table 8-6

Supported Modules for RAD ETX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

ETX-204AW (Wide Box)

3.7.2

Carrier Ethernet Demarcation Device 2.0

ETX-204 A (Short Box)

3.7.2/3.7.
3

Carrier Ethernet Demarcation Device 4.0

DP Version

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-3

Chapter 8

Support Information for RAD Devices

RAD IPmux-4L TDM Pseudowire Access Gateway

RAD ETX-SeriesSupported Technologies


The following technologies are supported by the RAD ETX-Series in Cisco ANA Version 3.7.2 and
3.7.3:

Ethernet (IEEE 802.3ad), page 8-8

Ethernet (IEEE 802.3), page 8-9

Hardware, page 8-13

Serial, page 8-14

Additional Technologies, page 8-15

RAD ETX-SeriesSupported Service Events


Table 8-7

Supported Service Events for RAD ETX-SeriesCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link Down

3.7.2

2.0

Link Up

3.7.2

2.0

RAD IPmux-4L TDM Pseudowire Access Gateway


This section includes the following information about RAD IPmux-4L devices (for information on the
NE types supported in Cisco ANA Version 3.7.2 and 3.7.3, see RAD IPmux-4L TDM Pseudowire Access
Gateway):

RAD IPmux-4LSupported Software Versions, page 8-5

RAD IPmux-4LSupported Modules, page 8-5

RAD IPmux-4LSupported Technologies, page 8-5

RAD IPmux-4LSupported Service Events, page 8-5

RAD IPmux-4LSupported Software Versions


Table 8-8

Supported Software Versions for RAD IPmux-4LCisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

1.00

3.7.2

2.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-4

OL-24429-01

Chapter 8

Support Information for RAD Devices


RAD LA-210 EFM DSL Network Termination Unit

RAD IPmux-4LSupported Modules


Table 8-9

Supported Modules for RAD IPmux-4LCisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

IPmux-4L

3.7.2

Module Description

DP Version

TDM Pseudowire Access Gateway. It also 2.0


offers Ethernet based Access services

RAD IPmux-4LSupported Technologies


The following technologies are supported by the RAD IPmux-4L in Cisco ANA Version 3.7.2 and 3.7.3:

Ethernet (IEEE 802.3), page 8-9

Physical Technologies, page 8-11

Hardware, page 8-13

Serial, page 8-14

Additional Technologies, page 8-15

RAD IPmux-4LSupported Service Events


Table 8-10

Supported Service Events for RAD IPmux-4LCisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link Down

3.7.2

2.0

Link Up

3.7.2

2.0

RAD LA-210 EFM DSL Network Termination Unit


This section includes the following information about RAD LA-210 devices (for information on the NE
types supported in Cisco ANA Version 3.7.2 and 3.7.3, see RAD LA-210 EFM DSL Network
Termination Unit):

RAD LA-210Supported Software Versions, page 8-6

RAD LA-210Supported Modules, page 8-6

RAD LA-210Supported Technologies, page 8-6

RAD LA-210Supported Service Events, page 8-6

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-5

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

RAD LA-210Supported Software Versions


Table 8-11

Supported Software Versions for RAD LA-210Cisco ANA Version 3.7.2 and 3.7.3

Software Version

ANA Version

DP Version

LA-210 V2.6

3.7.2

2.0

LA-210 V2.7

3.7.2

2.0

RAD LA-210Supported Modules


Table 8-12

Supported Modules for RAD LA-210Cisco ANA Version 3.7.2 and 3.7.3

Module Name

ANA
Version

Module Description

LA-210

3.7.2

EFM DSL Network Termination Unit 2.0

DP Version

RAD LA-210Supported Technologies


The following technologies are supported by the RAD LA-210 in Cisco ANA Version 3.7.2 and 3.7.3:

Ethernet (IEEE 802.3), page 8-9

DSL, page 8-11

Physical Technologies, page 8-11

Hardware, page 8-13

Serial, page 8-14

Additional Technologies, page 8-15

RAD LA-210Supported Service Events


Table 8-13

Supported Service Events for RAD LA-210Cisco ANA Version 3.7.2 and 3.7.3

Event Name

ANA
Version

DP
Expedited Version

Link Down

3.7.2

2.0

Link Up

3.7.2

2.0

Supported Technologies on RAD Devices


The following sections list the objects and attributes that are supported on RAD devices in
Cisco ANA Version 3.7.2 and 3.7.3 per technology:

IP, page 8-7

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-6

OL-24429-01

Chapter 8

Support Information for RAD Devices


Supported Technologies on RAD Devices

Ethernet (IEEE 802.3ad), page 8-8

Ethernet (IEEE 802.3), page 8-9

ATM, page 8-10

DSL, page 8-11

Physical Technologies, page 8-11

MPLS, page 8-12

PWE3, page 8-13

Hardware, page 8-13

Serial, page 8-14

Additional Technologies, page 8-15

IP

ETX-Series

LA-210

Attributes

IPmux-4L

IP Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-14

IMO NameIIPInterface

IP Address

Subnetwork Mask

Interface Name

IP Interface State

IMO NameIRoutingEntity

Routing Table

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IMO NameITunnelGRE

Name

Tunnel Destination and Source

IP Address

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-7

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

Ethernet (IEEE 802.3ad)

ETX-Series

LA-210

Attributes

IPmux-4L

Ethernet (IEEE 802.3ad) Attribute Support on RAD DevicesCisco ANA Version 3.7.2
and 3.7.3

ACE CSG-Series

Table 8-15

IMO NameILinkAggregationGroup802dot3ad

dot3adAggMACAddress

dot3adAggActorSystemPriority

dot3adAggActorSystemID

dot3adAggActorAdminKey

dot3adAggActorOperKey

dot3adAggPartnerSystemID

dot3adAggPartnerSystemPriority

dot3adAggPartnerOperKey

GroupNumber

AggregationProtocolType

MacAddress

ChannelAdminStatus

ChannelOperStatus

IMO NameILagPortEntry

Actor and Partner Admin Keys


Actor and Partner Oper Keys

Selected and Attached Aggregation


Identification

Actor Port

Actor Port Priority


Partner Admin and Oper Port

Y
1

Partner Admin and Oper Port Priority

Y
2

Actor and Partner Admin States

Actor and Partner Oper States

1. ETX-Series supports only Partner Oper Port.


2. ETX-Series supports only Partner Oper Port Priority.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-8

OL-24429-01

Chapter 8

Support Information for RAD Devices


Supported Technologies on RAD Devices

Ethernet (IEEE 802.3)


Ethernet (IEEE 802.3) Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and
3.7.3

ETX-Series

Mode

Virtual LAN Table

IANA Type

vlanencapType

Attributes

IPmux-4L

LA-210

ACE CSG-Series

Table 8-16

IMO NameIEthernet

MAC Address

Duplex Mode

IMO NameIVlanInterface

IMO NameIIEEE802

VLAN Identification

ATM

ETX-Series

Attributes

LA-210

ATM Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series
IPmux-4L

Table 8-17

IMO NameIAtm

VC Table

Cross-Connect Table

IMO NameIAtmVc

Virtual Channel Identifier

Virtual Path Identifier

Operational Status

IMO NameIIMAGroup

Description

Admin Status

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-9

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

Oper Status

Oper Status Last Change

GroupNumber

ImaVersion

ConfiguredBandwidth

NumberOfLinks

NumberOfActiveLinks

MinimumNumberOfTxLinks

MinimumNumberOfRxLinks

ClockMode

FrameLength

interfaceName

groupStatus

IANA Type

ETX-Series

Attributes

LA-210

ATM Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series
IPmux-4L

Table 8-17

IMO NameIAtmTrafficDescriptor

Traffic Descriptor Type

Service Category

Cell Loss Priority

Cell Delay Variation Tolerance

Maximum High Priority and


Aggregate Cell Rates

Minimum High Priority and


Aggregate Cell Rates

Sustainable High Priority and


Aggregate Cell Rates

Peak High Priority and Aggregate


Cell Rates

Index

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-10

OL-24429-01

Chapter 8

Support Information for RAD Devices


Supported Technologies on RAD Devices

DSL

ETX-Series

LA-210

Attributes

IPmux-4L

DSL Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-18

IMO NameIDsl / IIdsl / ISdsl / Ishdsl

Same as IPhysicalLayer

IMO NameIADsl

Same as IDsl

IMO NameIADsl2

Same as IADsl

Physical Technologies

ETX-Series

LA-210

Attributes

IPmux-4L

Physical Technologies Attribute Support on RAD DevicesCisco ANA Version 3.7.2


and 3.7.3

ACE CSG-Series

Table 8-19

IMO NameIDS1Pdh / IDS3Pdh

Framing Type

Loopback Type

Same as IPhysicalLayer

MPLS

ETX-Series

LA-210

Attributes

IPmux-4L

MPLS Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-20

IMO NameILse

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-11

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

ETX-Series

LDP Service

LA-210

Attributes

IPmux-4L

MPLS Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-20

IMO NameILdpService

Local Identification Status

LDP Peers

IMO NameILdpPeer

Peer Identification

Distribution Method

Protocol Type

Session Status

Protocol Version Hold Time

Hold Time

Hello Time Interval

PWE3

ETX-Series

LA-210

Attributes

IPmux-4L

PWE3 Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-21

IMO NameIPTPLayer2MplsTunnel

Local and Remote Router Addresses

Local and Remote Virtual Connection Y


Labels
Tunnel Identification

Tunnel Status

PsuedowireType

LocalMTU

RemoteMTU

SignalingProtocol

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-12

OL-24429-01

Chapter 8

Support Information for RAD Devices


Supported Technologies on RAD Devices

Hardware
Physical Equipment Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and
3.7.3

IPmux-4L

LA-210

ETX-Series

ACE CSG-Series

Table 8-22

Description

Equipment Holder Type

Module Name

Module Description

Software Version

Operational Status

Hardware Type & Version

IP Address

Communication State

Investigation State

Element Category

Element Type and Key

Device Name

System Name

System Description

Up Time

Software Version

Vendor Identity

Sys Contact

Sys Location

Attributes
IMO NameIChassis

IMO NameIModule

IMO NameIManagedElement

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-13

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

Serial

ETX-Series

LA-210

Attributes

IPmux-4L

Common Attribute Support on RAD DevicesCisco ANA Version 3.7.2 and 3.7.3

ACE CSG-Series

Table 8-23

IMO NameIPhysicalLayer

Media Type

Clocking Source

Maximum Speed

Administrative Status

Operational Status

IANA Type

Connector Description

Type

Name

IMO NameIBridge

IMO NameIVcSwitchingEntity

Cross Connect Table

Additional Technologies

ETX-Series

LA-210

Attributes

IPmux-4L

Additional Technologies Attribute Support on RAD DevicesCisco ANA Version 3.7.2


and 3.7.3

ACE CSG-Series

Table 8-24

IMO NameIPower Supply

Voltage names

Voltage Description

Voltage Status

Voltage Type

IMO NameIFan

Fan Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-14

OL-24429-01

Chapter 8

Support Information for RAD Devices


Supported Technologies on RAD Devices

Fan Value

ETX-Series

LA-210

Attributes

IPmux-4L

Additional Technologies Attribute Support on RAD DevicesCisco ANA Version 3.7.2


and 3.7.3 (Continued)

ACE CSG-Series

Table 8-24

IMO NameIIMAGroup

Ima Group Rx Speed

Ima Group Tx Speed

IMO NameIADSL2+

Adsl2+ Maximum Rx Speed

Adsl2+ Maximum Tx Speed

IMO NameISHDSL

Shdsl Speed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

8-15

Chapter 8

Support Information for RAD Devices

Supported Technologies on RAD Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

8-16

OL-24429-01

CH A P T E R

Support Information for Tellabs Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage
Tellabs devices in Cisco ANA Version 3.7.2/3.7.3. For more information about the objects and attributes
described in this chapter, see the Cisco Active Network Abstraction 3.7.2/3.7.3 Reference Guide.
This chapter contains the following topics:

Tellabs 8840 Multiservice Router, page 9-1

Supported Technologies on Tellabs Devices, page 9-5

Tellabs 8840 Multiservice Router


This section includes the following information about Tellabs 8840 Multiservice Router devices (for
information on the NE types supported in Cisco ANA Version 3.7.2/3.7.3, see Tellabs 8840 Multiservice
Router):

Tellabs 8840 Multiservice RouterSupported Software Versions, page 9-1

Tellabs 8840 Multiservice RouterSupported Topologies, page 9-2

Tellabs 8840 Multiservice RouterSupported Modules, page 9-2

Tellabs 8840 Multiservice RouterSupported Technologies, page 9-3

Tellabs 8840 Multiservice RouterSupported Service Events, page 9-3

Tellabs 8840 Multiservice RouterSupported Software Versions


Table 9-1

Supported Software Versions for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3

Software Version

ANA Version

DP Version

TMOS 7.0.0.3

3.7.2/3.7.3

6.0

TMOS 8.1.0.1

3.7.2/3.7.3

6.0

TMOS 8.1.0.1a

3.7.2/3.7.3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-1

Chapter 9

Support Information for Tellabs Devices

Tellabs 8840 Multiservice Router

Tellabs 8840 Multiservice RouterSupported Topologies


Table 9-2

Supported Topologies for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3

ANA
Version

DP
Version

BGP

3.7.2/3.7.
3

6.0

Ethernet

Ethernet

3.7.2/3.7.
3

6.0

MPLS

MPLS

3.7.2/3.7.
3

6.0

Physical Layer

Physical Layer

3.7.2/3.7.
3

6.0

Topology Type

Link Type

BGP

Tellabs 8840 Multiservice RouterSupported Modules


Table 9-3

Supported Modules for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3

Module Name

ANA
Version

Tellabs 8840 Multi-Service


Router Base Unit

Module Description

DP Version

3.7.2/3.7.
3

Tellabs Multi-Service Router 8840

6.0

81.88X0-ULC-2

3.7.2/3.7.
3

Tellabs 88X0 9M Universal Line Card 6.0


(ULC)

Switch Control Card

3.7.2/3.7.
3

Switch Control Card

6.0

81.8800-PLM 003C-30

3.7.2/3.7.
3

4 PORT Oc-3c(155Mbps)
concatenated long reach 40kms

6.0

81.8800-PLM 012C-20

3.7.2/3.7.
3

4 PORT 622Mbps OC-12c MS SMF 6.0


IR concatenated intermediate 15 kms

81.8800-PLM048C-10

3.7.2/3.7.
3

1 PORT 2.5Gbps OC-48c MS SMF


IR concatenated intermediate 2 kms

6.0

81.8800-PLMGE-20

3.7.2/3.7.
3

4port Gigabit Ethernet PLM 1000BaseLX (Includes 4 LC/SFP


optics) 550 meters

6.0

81.8800-PLM10GE-40

3.7.2/3.7.
3

1port 10Gigabit Ethernet PLM SMF


LR(LAN PHY) 40Kms

6.0

4 port Gigabit Ethernet PLM LX 3.7.2/3.7.


3

4 port Gigabit Ethernet PLM LX

6.0

2 port OC-3STM-1 SMF IR

2 port OC-3STM-1 SMF IR

6.0

3.7.2/3.7.
3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-2

OL-24429-01

Chapter 9

Support Information for Tellabs Devices


Tellabs 8840 Multiservice Router

Table 9-3

Supported Modules for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3 (Continued)

Module Name

ANA
Version

Module Description

DP Version

4port OC-3/STM-1 TDM


MSPLM SMFIR

3.7.2/3.7.
3

4port OC-3/STM-1 TDM MSPLM


SMFIR

6.0

1port OC-48C/STM-16c TDM


MSPLM SMF IR

3.7.2/3.7.
3

1port OC-48C/STM-16c TDM


MSPLM SMF IR

6.0

1 port 9M 10GiG ENET SMF LR

6.0

1 port 9M 10GiG ENET SMF LR 3.7.2/3.7.


3

Tellabs 8840 Multiservice RouterSupported Technologies


The following technologies are supported by the Tellabs 8840 Multiservice Router in
Cisco ANA Version 3.7.2/3.7.3:

IP, page 9-5

Routing Protocols, page 9-6

Ethernet, page 9-7

MPLS, page 9-8

Hardware, page 9-8

Serial, page 9-9

ATM, page 9-10

SONET/SDH, page 9-11

Tellabs 8840 Multiservice RouterSupported Service Events


Table 9-4

Supported Service Events for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3

Event Name

ANA
Version

DP
Expedited Version

Primary HSRP Interface


Active/Inactive

3.7.2/3.7.
3

6.0

Secondary HSRP Interface


Active/Inactive

3.7.2/3.7.
3

6.0

All IP Interfaces Down / Active IP


Interfaces Found

3.7.2/3.7.
3

6.0

Interface Status Down/Up

3.7.2/3.7.
3

6.0

Card In/Out

3.7.2/3.7.
3

6.0

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-3

Chapter 9

Support Information for Tellabs Devices

Tellabs 8840 Multiservice Router

Table 9-4

Supported Service Events for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3 (Continued)

ANA
Version

DP
Expedited Version

Link Down/Up

3.7.2/3.7.
3

6.0

Device Unreachable

3.7.2/3.7.
3

6.0

CPU Over Utilized

3.7.2/3.7.
3

6.0

Memory Over Utilized

3.7.2/3.7.
3

6.0

Device Unsupported

3.7.2/3.7.
3

6.0

Discard Packets

3.7.2/3.7.
3

6.0

Dropped Packets

3.7.2/3.7.
3

6.0

Module Unsupported

3.7.2/3.7.
3

6.0

Port Flapping

3.7.2/3.7.
3

6.0

Port Down

3.7.2/3.7.
3

6.0

Rx Over Utilized

3.7.2/3.7.
3

6.0

Tx Over Utilized

3.7.2/3.7.
3

6.0

VPN Leak

3.7.2/3.7.
3

6.0

Cloud Problem

3.7.2/3.7.
3

6.0

Broken LSP Discovered

3.7.2/3.7.
3

6.0

MPLS Black Hole

3.7.2/3.7.
3

6.0

Layer 2 Tunnel Down

3.7.2/3.7.
3

6.0

MPLS TE Tunnel Down/Flapping

3.7.2/3.7.
3

6.0

BGP Neighbor Down

3.7.2/3.7.
3

6.0

Card Up/Down

3.7.2/3.7.
3

6.0

Event Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-4

OL-24429-01

Chapter 9

Support Information for Tellabs Devices


Supported Technologies on Tellabs Devices

Table 9-4

Supported Service Events for Tellabs 8840 Multiservice


RouterCisco ANA Version 3.7.2/3.7.3 (Continued)

ANA
Version

DP
Expedited Version

VSI Up/Down

3.7.2/3.7.
3

6.0

VSI Admin Down

3.7.2/3.7.
3

6.0

EFP Up/Down

3.7.2/3.7.
3

6.0

EFP Admin Down

3.7.2/3.7.
3

6.0

EFP down due to error disabled

3.7.2/3.7.
3

6.0

Vlan Tagged Interface Up/Down

3.7.2/3.7.
3

6.0

Vlan Tagged Interface AdminDown

3.7.2/3.7.
3

6.0

Event Name

Supported Technologies on Tellabs Devices


The following sections list the objects and attributes that are supported on Tellabs devices in
Cisco ANA Version 3.7.2/3.7.3 per technology:

IP, page 9-5

Routing Protocols, page 9-6

Ethernet, page 9-7

MPLS, page 9-8

Hardware, page 9-8

Serial, page 9-9

ATM, page 9-10

SONET/SDH, page 9-11

IP
IP Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA Version
3.7.2/3.7.3

MSE8840

Table 9-5

Attributes
IMO NameIIPInterface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-5

Chapter 9

Support Information for Tellabs Devices

Supported Technologies on Tellabs Devices

IP Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA Version


3.7.2/3.7.3 (Continued)

MSE8840

Table 9-5

Attributes
IP Address

Subnetwork Mask

IP Interface Addresses Array

Interface Name

IP Interface State

Interface Description

IMO NameIRoutingEntity

Routing Table

ARP Entity

Name

Logical Sons

IMO NameIRoutingEntry

Destination IP Subnet

Next Hop IP Address

Type

Routing Protocol Type

Outgoing Interface Name

IMO NameIARPEntity

ARP Table

IMO NameIARPEntry

IP Address

MAC Address

Port

Entry Type

Routing Protocols
Routing Protocols Attribute Support on Tellabs 8840 Multiservice Router
DevicesCisco ANA Version 3.7.2/3.7.3

Attributes

MSE8840

Table 9-6

IMO NameIBgpNeighborEntry

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-6

OL-24429-01

Chapter 9

Support Information for Tellabs Devices


Supported Technologies on Tellabs Devices

Routing Protocols Attribute Support on Tellabs 8840 Multiservice Router


DevicesCisco ANA Version 3.7.2/3.7.3 (Continued)

MSE8840

Table 9-6

Attributes
Remote Identifier

Remote Address

Remote Autonomous System

Peer State

Hold Time

Keep Alive Time

IMO NameIOspfEntry

Area Identifier

IP Address

Type

Administrative Status

Ospf Entry State

Ethernet
Ethernet Attribute Support on Tellabs 8840 Multiservice Router
DevicesCisco ANA Version 3.7.2/3.7.3

MSE8840

Table 9-7

Attribute
IMO NameIEthernet

MAC Address

Duplex Mode

isElmiEnabled

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-7

Chapter 9

Support Information for Tellabs Devices

Supported Technologies on Tellabs Devices

MPLS
MPLS Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA
Version 3.7.2/3.7.3

MSE8840

Table 9-8

Attributes
IMO NameILdpPeer

Peer Identification

Transport Address

Distribution Method

Protocol Type

Path Vector Limi

Session Status

Protocol Version

Hold Time

Keep Alive Time

Peer Discovery Sources

Hardware
Physical Equipment Attribute Support on Tellabs 8840 Multiservice Router
DevicesCisco ANA Version 3.7.2/3.7.3

Attributes

MSE8840

Table 9-9

IMO NameIChassis

Description

Equipment Holder Type

Serial Number

IMO NameIModule

Module Name

Module Description

Software Version

Operational Status

Hardware Type & Version

Serial Number (soft property)

Slots Number

IMO NameIManagedElement

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-8

OL-24429-01

Chapter 9

Support Information for Tellabs Devices


Supported Technologies on Tellabs Devices

Physical Equipment Attribute Support on Tellabs 8840 Multiservice Router


DevicesCisco ANA Version 3.7.2/3.7.3 (Continued)

MSE8840

Table 9-9

Attributes
IP Address

Communication State

Investigation State

Element Category

Element Type and Key

Device Name

System Name

System Description

Up Time

Software Version

Vendor Identity

Sys Contact

Sys Location

Serial
Serial Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA
Version 3.7.2/3.7.3

MSE8840

Table 9-10

Attributes
IMO NameIPhysicalLayer

Media Type

Clocking Source

Maximum Speed

Is Internal Port

Discarded and Received Input Data


Counters

Dropped and Forward Output Data


Counters

Administrative Status

Operational Status

Last Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-9

Chapter 9

Support Information for Tellabs Devices

Supported Technologies on Tellabs Devices

Serial Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA


Version 3.7.2/3.7.3 (Continued)

MSE8840

Table 9-10

Attributes
IANA Type

Port Alias

Location

Sending Alarms

Connector Description

Status

Managed

ATM
ATM Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco ANA
Version 3.7.2/3.7.3

Attributes

MSE8840

Table 9-11

IMO NameIAtmTrafficDescriptor

Traffic Descriptor Type

Service Category

Cell Loss Priority

Cell Delay Variation

Cell Delay Variation Tolerance

Index

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-10

OL-24429-01

Chapter 9

Support Information for Tellabs Devices


Supported Technologies on Tellabs Devices

SONET/SDH
SONET/SDH Attribute Support on Tellabs 8840 Multiservice Router DevicesCisco
ANA Version 3.7.2/3.7.3

MSE8840

Table 9-12

Attributes
IMO NameISonetSdh

Clocking

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

9-11

Chapter 9

Support Information for Tellabs Devices

Supported Technologies on Tellabs Devices

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

9-12

OL-24429-01

CH A P T E R

10

Traps
This section describes the traps for third-party devices in Cisco ANA. Traps appear in the Cisco ANA
EventVision V1 Trap and V2 Trap tabs. (For information about Cisco ANA EventVision, see the
Cisco Active Network Abstraction 3.7.2 User Guide.) Trap information is presented in two forms:

Trap TablesA section devoted to the supported traps for both versions V1 (for example,
Alcatel-Lucent 7450 ESS V1 Traps). Each of these sections contains a table listing the name of each
third-party device-supported trap in that MIB, along with its OID, varbinds, and a short description.
The traps Short Description is what you see in a tickets Trap tabs in Cisco ANA EventVision 3.7.2
and 3.7.3. In the trap tables in this Reference Guide, each traps Short Description is also a link to
the traps corresponding parameters.

Registry Parameter TablesA section devoted to the event types, event subtypes and Cisco ANA
registry parameters for the traps supported in each MIB. There is one parameter table for every trap
table (for example, Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters). Each trap event can
have multiple event subtypes, or states. The parameter tables indicate when each trap state is
generated, and how Cisco ANA processes them (such as their severity, and whether they are
ticketable, can be correlated, are autocleared, and so on).

Cisco ANA 3.7.x users can enable an additional IP address in the device for traps and syslogs. This new
feature is called Multisource Events. When Cisco ANA 3.7.x receives a trap or syslog from that device
(from the new IP) it will still recognize the device. For more details on multisource events see Cisco
ANA 3.7.1 Release Notes.
This chapter includes the following topics:

Alcatel-Lucent ASAM/ISAM V1 Traps

Alcatel-Lucent ASAM/ISAM V2 Traps

Alcatel-Lucent 7450 ESS V1 Traps

Alcatel-Lucent 7450 ESS V2 Traps

Alcatel-Lucent 7705 SAR V2 Traps

Alcatel-Lucent 7750/7710 SR V1 Traps

Alcatel-Lucent 7750/7710 SR V2 Traps

Calix V2 Traps

DragonWave Horizon Series V2 Traps

Huawei S9300-Series V1 Traps

Huawei S9300-Series V2 Traps

Huawei CX600/ATN Series V1 Traps

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-1

Chapter 10

Huawei CX600/ATN Series V2 Traps

Juniper E-Series V1 Traps

Juniper E-Series V2 Traps

Juniper M-Series V1 Traps

Juniper M-Series V2 Traps

Juniper MX-Series V1 Traps

Juniper MX-Series V2 Traps

Juniper Netscreen V1 Traps

Juniper Netscreen V2 Traps

Juniper T-Series V1 Traps

Juniper T-Series V2 Traps

Juniper JCS-Series V1 Traps

Juniper JCS-Series V2 Traps

RAD ACE V1 Traps

RAD ETX 204A V1 Traps

RAD IPmux-4L V1 Traps

RAD LA-210 V1 Traps

Tellabs V1 Traps

Tellabs V2 Traps

Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters

Calix V2 Traps Registry Parameters

DragonWave Horizon Series V2 Traps Registry Parameters

Huawei S9300-Series V1 Traps Registry Parameters

Huawei S9300-Series V2 Traps Registry Parameters

Huawei CX600/ATN Series V1 Traps Registry Parameters

Huawei CX600/ATN Series V2 Traps Registry Parameters

Juniper E-Series V1 Traps Registry Parameters

Juniper E-Series V2 Traps Registry Parameters

Juniper M-Series V1 Traps Registry Parameters

Juniper M-Series V2 Traps Registry Parameters

Juniper MX-Series V1 Traps Registry Parameters

Juniper MX-Series V2 Traps Registry Parameters

Traps

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-2

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent ASAM/ISAM V1 Traps

Juniper Netscreen V1 Traps Registry Parameters

Juniper Netscreen V2 Traps Registry Parameters

Juniper T-Series V1 Traps Registry Parameters

Juniper T-Series V2 Traps Registry Parameters

Juniper JCS-Series V1 Traps Registry Parameters

Juniper JCS-Series V2 Traps Registry Parameters

RAD ACE V1 Traps Registry Parameters

RAD ETX 204A V1 Traps Registry Parameters

RAD IPmux-4L V1 Traps Registry Parameters

RAD LA-210 V1 Traps Registry Parameters

Tellabs V1 Traps Registry Parameters

Tellabs V2 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V1 Traps


Table 10-1 lists the Alcatel-Lucent ASAM/ISAM V1 traps supported in Cisco ANA. For associated
event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or
see Table 10-28.
Table 10-1

Alcatel-Lucent ASAM/ISAM V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospf-if-auth-fa 6
ilure

1.3.6.1.2.
1.14.16.2.
6

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

ospf-if-config- 6
error

1.3.6.1.2.
1.14.16.2.
4

ospf if config error trap

alcatel OSPF
if config error
trap

ospf-if-rx-bad- 6
packet

1.3.6.1.2.
1.14.16.2.
8

ospf if rx bad packet trap

alcatel OSPF
if rx bad
packet trap

ospf-if-state-c
hange

16

1.3.6.1.2.
1.14.16.2.
16

ospf if state change trap

alcatel OSPF
if state change
trap

ospf-max-age- 6
lsa

13

1.3.6.1.2.
1.14.16.2.
13

ospf max age lsa trap

alcatel OSPF
max age lsa
trap

ospf-nbr-state- 6
change

1.3.6.1.2.
1.14.16.2.
2

ospf nbr state change trap

alcatel OSPF
nbr state
change trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-3

Chapter 10

Traps

Alcatel-Lucent ASAM/ISAM V2 Traps

Table 10-1

Alcatel-Lucent ASAM/ISAM V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospf-originate- 6
lsa

12

1.3.6.1.2.
1.14.16.2.
12

ospf originate lsa trap

alcatel OSPF
originate lsa
trap

ent-config-cha 6
nge

1.3.6.1.2.
1.47.2.0.1

ent config change trap

alcatel Ent
config change

Alcatel-Lucent ASAM/ISAM V2 Traps


Table 10-2 lists the Alcatel-Lucent ASAM/ISAM V2 Traps supported in Cisco ANA. For associated
event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or
see Table 10-29.
Table 10-2

Alcatel-Lucent ASAM/ISAM V2Traps

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

cold-start-v2

1.3.6.1.6.3.1.1.5.1

MIB2 V2 cold start trap

alcatel Cold
start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

MIB2 V2 warm start trap

alcatel Warm
start trap

link-down-v2

1.3.6.1.6.3.1.1.5.3

MIB2 V2 link down

alcatel Link
down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

MIB2 V2 link up

alcatel Link up
trap

ospf-if-auth-fa 1.3.6.1.2.1.14.16.2.6
ilure

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

ospf-if-config- 1.3.6.1.2.1.14.16.2.4
error

ospf if config error trap

alcatel OSPF
if config error
trap

ospf-if-rx-bad- 1.3.6.1.2.1.14.16.2.8
packet

ospf if rx bad packet trap

alcatel OSPF
if rx bad
packet trap

ospf-tx-retrans 1.3.6.1.2.1.14.16.2.10
mit

ospf tx retransmit trap

alcatel OSPF
tx retransmit
trap

ospf-tx-retrans 1.3.6.1.2.1.14.16.2.10
mit

ospf tx retransmit trap

alcatel OSPF
tx retransmit
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-4

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps

Table 10-2

Alcatel-Lucent ASAM/ISAM V2Traps

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description
alcatel BGP
established
trap

Trap Name

Trap OID

bgpEstablishe
d

1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

bgpBackward
Transition

1.3.6.1.2.1.15.7.2

NA

The BGPBackwardTransition Event alcatel BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

NA

Alcatel-Lucent 7450 ESS V1 Traps


Table 10-3 lists the Alcatel-Lucent V1 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-30.
Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

hdsl2shdsl-loc
al-power-loss

16

1.3.6.1.2.
1.10.48.0.
16

Subtype
Varbind
Value

Description
hdsl2shdsl local power loss trap

Short
Description
alcatel
Hdsl2shdsl
local power
loss trap

hdsl2shdsl loop attend crossing trap alcatel


Hdsl2shdsl
loop atten
crossing trap

hdsl2shdsl-loo 6
p-atten-crossin
g

hdsl2shdsl-loo 6
pback-failure

hdsl2shdsl-no- 6
neighbor-prese
nt

15

1.3.6.1.2.
1.10.48.0.
15

hdsl2shdsl no neighbor present trap alcatel


Hdsl2shdsl
loopback
failure trap

hdsl2shdsl-per 6
f-crc-anomalie
s-thresh

1.3.6.1.2.
1.10.48.0.
5

hdsl2shdsl perf crc anomalies thresh alcatel


trap
Hdsl2shdsl
perf crc
anomalies
thresh trap

1.3.6.1.2.
1.10.48.0.
1

hdsl2shdsl loopback failure trap


1.3.6.1.2.
1.10.48.0.
9

alcatel
Hdsl2shdsl
loopback
failure trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-5

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V1 Traps

Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

hdsl2shdsl-per 6
f-es-thresh

1.3.6.1.2.
1.10.48.0.
3

hdsl2shdsl perf es thresh trap

alcatel
Hdsl2shdsl
perf es thresh
trap

hdsl2shdsl-per 6
f-los-ws-thres
h

1.3.6.1.2.
1.10.48.0.
6

hdsl2shdsl perf los ws thresh trap

alcatel
Hdsl2shdsl
perf los ws
thresh trap

1.3.6.1.2.
1.10.48.0.
4

hdsl2shdsl perf ses thresh trap

alcatel
Hdsl2shdsl
perf ses thresh
trap

1.3.6.1.2.
1.46.1.0

dlsw trap circuit down trap

alcatel DLSW
circuit down
trap

hdsl2shdsl-per
f-ses-thresh
dlsw-trap-circ
uit-down

hdsl2shdsl-per 6
f-uas-thresh

1.3.6.1.2.
1.10.48.0.
7

hdsl2shdsl perf uas thresh trap

alcatel
Hdsl2shdsl
perf uas thresh
trap

hdsl2shdsl-po
wer-back-off

10

1.3.6.1.2.
1.10.48.0.
10

hdsl2shdsl power back off trap

alcatel
Hdsl2shdsl
power back off
trap

hdsl2shdsl-pro 6
tocol-init-failu
re

14

1.3.6.1.2.
1.10.48.0.
14

hdsl2shdsl protocol init failure trap

alcatel
Hdsl2shdsl
protocol init
failure trap

hdsl2shdsl-snr 6
-margin-crossi
ng

1.3.6.1.2.
1.10.48.0.
2

hdsl2shdsl snr margin crossing trap alcatel


Hdsl2shdsl snr
margin
crossing trap

hdsl2shdsl-spa 6
n-invalid-numrepeaters

1.3.6.1.2.
1.10.48.0.
8

hdsl2shdsl span invalid num


repeaters trap

alcatel
Hdsl2shdsl
span invalid
num repeaters
trap

new-root

1.3.6.1.2.
1.17.0.1

New root trap

alcatel New
Root trap

ospf-if-auth-fa 6
ilure

1.3.6.1.2.
1.14.16.2.
6

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-6

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps

Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospf-if-config- 6
error

1.3.6.1.2.
1.14.16.2.
4

ospf if config error trap

alcatel OSPF
if config error
trap

ospf-if-rx-bad- 6
packet

1.3.6.1.2.
1.14.16.2.
8

ospf if rx bad packet trap

alcatel OSPF
if rx bad
packet trap

ospf-if-state-c
hange

16

1.3.6.1.2.
1.14.16.2.
16

ospf if state change trap

alcatel OSPF
if state change
trap

1.3.6.1.2.
1.46.1.0

dlsw trap tconn down trap

alcatel DLSW
tconn down
trap

dlsw-trap-tcon 6
n-down
ospf-lsdb-appr 6
oaching-overfl
ow

16

1.3.6.1.2.
1.14.16.2.
15

ospf lsdb approaching overflow trap alcatel OSPF


lsdb
approaching
overflow trap

ospf-lsdb-over 6
flow

14

1.3.6.1.2.
1.14.16.2.
14

ospf lsdb overflow trap

authentication- 4
failure

1.3.6.1.4.
1

MIB2 V1 authentication-failure trap alcatel


Authenticatio
n failure trap

ospf-max-age- 6
lsa

13

1.3.6.1.2.
1.14.16.2.
13

ospf max age lsa trap

alcatel OSPF
max age lsa
trap

ospf-nbr-state- 6
change

1.3.6.1.2.
1.14.16.2.
2

ospf nbr state change trap

alcatel OSPF
nbr state
change trap

ospf-originate- 6
lsa

12

1.3.6.1.2.
1.14.16.2.
12

ospf originate lsa trap

alcatel OSPF
originate lsa
trap

ospf-tx-retrans 6
mit

10

1.3.6.1.2.
1.14.16.2.
10

ospf tx retransmit trap

alcatel OSPF
tx retransmit
trap

ospf-virt-if-aut 6
h-failure

1.3.6.1.2.
1.14.16.2.
7

ospf virt if auth failure trap

alcatel OSPF
virt if auth
failure trap

ospf-virt-if-co
nfig-error

1.3.6.1.2.
1.14.16.2.
5

ospf virt if config error trap

alcatel OSPF
virt if config
error trap

alcatel OSPF
lsdb
approaching
overflow trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-7

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V1 Traps

Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

dlsw-trap-tcon 6
n-partner-rejec
t

1.3.6.1.2.
1.46.1.0.1

dlsw trap tconn partner reject trap

alcatel DLSW
tconn partner
reject trap

ospf-virt-if-rx- 6
bad-packet

1.3.6.1.2.
1.14.16.2.
9

ospf virt if rx bad packet trap

alcatel OSPF
virt if rx bad
packet trap

ospf-virt-if-sta 6
te-change

1.3.6.1.2.
1.14.16.2.
1

ospf virt if state change trap

alcatel OSPF
virt if state
change trap

ospf-virt-if-tx- 6
retransmit

11

1.3.6.1.2.
1.14.16.2.
11

ospf virt if tx retransmit trap

alcatel OSPF
virt if tx
retransmit trap

ospf-virt-nbr-s 6
tate-change

1.3.6.1.2.
1.14.16.2.
3

ospf virt nbr state change trap

alcatel OSPF
virt nbr state
change trap

cold-start

1.3.6.1.6.
3.1.1.5.1

MIB2 V1 cold start trap

alcatel Cold
start trap

vrrp-trap-auth- 6
failure

1.3.6.1.2.
1.68.0.2

vrrp trap auth failure trap

alcatel Vrrp
trap auth
failure trap

vrrp-trap-new- 6
master

1.3.6.1.2.
1.68.0.1

vrrp trap new master trap

alcatel Vrrp
trap new
master trap

link-down

1.3.6.1.6.
3.1.1.5.3

MIB2 V1 link down

alcatel Link
down trap

link-up

1.3.6.1.6.
3.1.1.5.4

MIB2 V1 link up

alcatel Link up
trap

warm-start

1.3.6.1.6.
3.1.1.5.2

MIB2 V1 warm start trap

alcatel Warm
start trap

dlsw-trap-tcon 6
n-prot-violatio
n

1.3.6.1.2.
1.46.1.0.2

dlsw trap tconn prot violation trap

alcatel DLSW
tconn prot
violation trap

x25-reset

1.3.6.1.2.
1.10.5.0.2

x25 reset trap

alcatel X25
reset trap

x25-restart

1.3.6.1.2.
1.10.5.0.2

x25 restart trap

alcatel X25
restart trap

dummy-ticket

1.3.6.1.4.
1.42

Dummy ticket on sun servers.

alcatel
Dummy ticket
trap

tcp connection 6
table

1.3.6.1.2.
1.6.13.1

tcp connection table2 trap - DUMP

alcatel TCP
connection
table trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-8

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps

Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

link-down_1

MIB2 V1_1 link down

alcatel Link
down trap

link-up_1

MIB2 V1_1 link up

alcatel Link up
trap

Subtype
Varbind
Value

Description

Short
Description

hdsl2shdsl-con 6
fig-init-failure

13

1.3.6.1.2.
1.10.48.0.
13

hdsl2shdsl config init failure trap

alcatel
Hdsl2shdsl
config init
failure trap

hdsl2shdsl-dc- 6
continuity-faul
t

12

1.3.6.1.2.
1.10.48.0.
12

hdsl2shdsl dc continuity fault trap

alcatel
Hdsl2shdsl dc
continuity
fault trap

rsEnvirPowerS 6
upplyFailed

A power supply on the sending


device has failed. The
entPhysicalDescr object identifies
the failed supply.

Riverstone
environment
power supply
failed

rsEnvirPowerS 6
upplyRecovere
d

A power supply on the sending


device has recovered after failure.
The entPhysicalDescr object
identifies the recovered supply.

Riverstone
environment
power supply
recovered trap

rsEnvirHotSw
apIn

A module has been inserted into the Riverstone


environment
chassis. The object
swap in trap
entPhysicalDescr identifies the
module. The module can be a card
for the main bay or a switching
fabric in the switching fabric bay

rsEnvirHotSw
apOut

Riverstone
A module has been turned off or
environment
removed from the chassis. The
swap out trap
object entPhysicalDescr identifies
the module. The module can be a
card for the main bay or a switching
fabric in the switching fabric.

rsEnvirFanFail 6
ed

A Fan tray on the sending device has Riverstone


failed. The entPhysicalDescr object environment
identifies the failed fan tray
fan failed trap

rsEnvirFanRec 6
overed

A Fan tray on the sending device has


recovered after failure. The
entPhysicalDescr object identifies
the recovered Fan tray

Riverstone
environment
fan recovered
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-9

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V2 Traps

Table 10-3

Alcatel-Lucent 7450 ESS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

A temperature inside the chassis on


the sending device has exceeded
normal operating temperature. The
entPhysicalDescr object identifies
the chassis

Riverstone
environment
temperature
exceeded trap

rsEnvirTempN 6
ormal

A temperature inside the chassis on


the sending device has returned to
normal operating temperature. The
entPhysicalDescr object identifies
the chassis

Riverstone
environment
temperature
normal trap

rsEnvirTempE
xceeded

Alcatel-Lucent 7450 ESS V2 Traps


Table 10-4 lists the Alcatel-Lucent V2 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-31.
Table 10-4

Alcatel-Lucent 7450 ESS V2 Traps

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

sbi-boot-confi
g-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

Completed the configuration phase


following a system reboot

sbi boot config

sbi-boot-snmp
d-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

Completed the SNMP daemon


initialization following a system
reboot

sbi boot
snmpd

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.3
failed-v2

Saving of configuration is stopped


due to errors

ssi saveconfig
failed

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.2
succeeded-v2

Saving of configuration finished


without errors

ssi saveconfig
succeeded

tmnx-config-cr 1.3.6.1.4.1.6527.3.1.3.1.0.9
eate-v2

New row entry is created in one of


the MIB tables

tmnx config
create

tmnx-config-d
elete-v2

An existing row entry in one of the


MIB tables is deleted

tmnx config
delete

1.3.6.1.4.1.6527.3.1.3.1.0.10

Description

Short
Description

Trap Name

tmnx-config-m 1.3.6.1.4.1.6527.3.1.3.1.0.8
odify-v2

A configuration attribute associated tmnx config


with a row entry in a MIB table is
modify
modified

tmnx-env-tem
p-too-high-v2

Temperature sensor reading on an


equipment object is greater than its
configured threshold

tmnx env temp


too high

One of the cards in a chassis has


failed

tmnx eq card
failure

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

tmnx-eq-card-f 1.3.6.1.4.1.6527.3.1.3.2.1.0.7
ailure-v2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-10

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V2 Traps

Table 10-4

Trap Name

Alcatel-Lucent 7450 ESS V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

tmnx-eq-card-i 1.3.6.1.4.1.6527.3.1.3.2.1.0.8
nserted-v2

Card is inserted into the chassis

tmnx eq card
inserted

tmnx-eq-card-r 1.3.6.1.4.1.6527.3.1.3.2.1.0.9
emoved-v2

Card is removed from the chassis

tmnx eq card
removed

tmnx-eq-fan-fa 1.3.6.1.4.1.6527.3.1.3.2.1.0.6
ilure-v2

One of the fans in a fan tray has


failed

tmnx eq fan
failure

tmnx-eq-flash- 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
disk-full-v2
3

No space left on the compact flash

tmnx eq flash
disk full

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds1-alarm-clea 8
r-v2

DS1 interface alarm condition is


cleared

tmnx eq port
ds1 alarm
clear

tmnx-eq-portds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
7

DS1 interface alarm condition is


detected

tmnx eq port
ds1 alarm

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds3-alarm-clea 6
r-v2

DS3 interface alarm condition is


cleared

tmnx eq port
ds3 alarm
clear

tmnx-eq-portds3-alarm-v2

DS3 interface alarm condition is


detected

tmnx eq port
ds3 alarm

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
5

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
rror-v2
4

Error listed in tmnxPortNotifyError tmnx eq port


is detected on the port
error

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-cle 3
ar-v2

Ethernet port alarm condition is


cleared

tmnx eq port
ether alarm
clear

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-v2 2

Ethernet port alarm condition is


detected

tmnx eq port
ether alarm

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.8
fp-inserted-v2

SFP is inserted in the port

tmnx eq port
sfp inserted

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.9
fp-removed-v2

SFP is removed from the port

tmnx eq port
sfp removed

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.5
onet-alarm-cle
ar-v2

SONET/SDH port alarm condition


is cleared

tmnx eq port
sonet alarm
clear

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.4
onet-alarm-v2

SONET/SDH port alarm condition


is detected

tmnx eq port
sonet alarm

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
r-supply-failur
e-v2

One of the chassis's power supplies


fails

tmnx eq power
supply failure

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.4
r-supply-insert
ed-v2

One of the chassis's power supplies


is inserted

tmnx eq power
supply
inserted

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-11

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V2 Traps

Table 10-4

Alcatel-Lucent 7450 ESS V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

tmnx-eq-powe
r-supply-remo
ved-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

One of the chassis's power supplies


is removed.

tmnx-eq-wron
g-card-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.1
0

Wrong type of card is inserted into a tmnx eq


slot of the chassis.
wrong card

tmnx eq power
supply
removed

tmnx-red-prim 1.3.6.1.4.1.6527.3.1.3.2.1.0.2
ary-cpm-fail-v 1
2

The primary CPM fail.s

tmnx-state-cha 1.3.6.1.4.1.6527.3.1.3.1.0.11
nge-v2

There is a change in either the


tmnx state
adminstrative or operational state of change
a MIB table entry.

cold-start-v2

1.3.6.1.6.3.1.1.5.1

MIB2 V2 cold start trap

alcatel Cold
start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

MIB2 V2 warm start trap

alcatel Warm
start trap

link-down-v2

(1.3.6.1.6.3.1.1.5.3

MIB2 V2 link down

alcatel Link
down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

MIB2 V2 link up

alcatel Link up
trap

BGP trap from bgp peer table

BGP trap

hdsl2shdsl device fault v2 trap

alcatel
Hdsl2shdsl
device fault
V2 trap
alcatel BGP
established
trap

bgp-trap

tmnx red
primary cpm
fail

hdsl2shdsl-dev
ice-fault-v2

1.3.6.1.2.1.10.48.0.11

bgpEstablishe
d

1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

bgpBackward
Transition

1.3.6.1.2.1.15.7.2

NA

The BGPBackwardTransition Event alcatel BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

NA

ospf-if-auth-fa 1.3.6.1.2.1.14.16.2.6
ilure

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

ospf-if-config- 1.3.6.1.2.1.14.16.2.4
error

ospf if config error trap

alcatel OSPF
if config error
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-12

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7705 SAR V2 Traps

Table 10-4

Trap Name

Alcatel-Lucent 7450 ESS V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

ospf-if-rx-bad- 1.3.6.1.2.1.14.16.2.8
packet
ospf-if-state-c
hanged

Description
ospf if rx bad packet trap

1.3.6.1.2.1.14.16.2.16

Short
Description
alcatel OSPF
if rx bad
packet trap
alcatel OSPF
if state change
trap

Alcatel-Lucent 7705 SAR V2 Traps


Table 10-5 lists the Alcatel-Lucent 7705 SAR V2 traps supported in Cisco ANA. For associated event
types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-33.

Table 10-5

Alcatel-Lucent 7705 SAR V2 Traps

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

sbi-boot-confi
g-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

Completed the configuration phase


following a system reboot

sbi boot config

sbi-boot-snmp
d-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

Completed the SNMP daemon


initialization following a system
reboot.

sbi boot
snmpd

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.3
failed-v2

Saving of configuration is stopped


due to errors.

ssi saveconfig
failed

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.2
succeeded-v2

Saving of configuration finished


without errors.

ssi saveconfig
succeeded

tmnx-config-cr 1.3.6.1.4.1.6527.3.1.3.1.0.9
eate-v2

New row entry is created in one of


the MIB tables.

tmnx config
create

tmnx-config-d
elete-v2

An existing row entry in one of the


MIB tables is deleted.

tmnx config
delete

1.3.6.1.4.1.6527.3.1.3.1.0.10

Description

Short
Description

Trap Name

tmnx-config-m 1.3.6.1.4.1.6527.3.1.3.1.0.8
odify-v2

A configuration attribute associated tmnx config


with a row entry in a MIB table is
modify
modified.

tmnx-env-tem
p-too-high-v2

Temperature sensor reading on an


equipment object is greater than its
configured threshold.

tmnx env temp


too high

One of the fans in a fan tray has


failed.

tmnx eq fan
failure

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

tmnx-eq-fan-fa 1.3.6.1.4.1.6527.3.1.3.2.1.0.6
ilure-v2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-13

Chapter 10

Traps

Alcatel-Lucent 7705 SAR V2 Traps

Table 10-5

Alcatel-Lucent 7705 SAR V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

tmnx-eq-fan-fa 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
ilure-v2
3

No space left on the compact flash.

tmnx eq flash
disk full

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds1-alarm-clea 8
r-v2

DS1 interface alarm condition is


cleared

tmnx eq port
ds1 alarm
clear

tmnx-eq-portds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
7

DS1 interface alarm condition is


detected

tmnx eq port
ds1 alarm

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds3-alarm-clea 6
r-v2

DS3 interface alarm condition is


cleared

tmnx eq port
ds3 alarm
clear

tmnx-eq-portds3-alarm-v2

DS3 interface alarm condition is


detected

tmnx eq port
ds3 alarm

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
5

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
rror-v2
4

Error listed in tmnxPortNotifyError tmnx eq port


is detected on the port.
error

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-cle 3
ar-v2

Ethernet port alarm condition is


cleared.

tmnx eq port
ether alarm
clear

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-v2 2

Ethernet port alarm condition is


detected.

tmnx eq port
ether alarm

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.8
fp-inserted-v2

SFP is inserted in the port

tmnx eq port
sfp inserted

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.9
fp-removed-v2

SFP is removed from the port

tmnx eq port
sfp removed

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.5
onet-alarm-cle
ar-v2

SONET/SDH port alarm condition


is cleared.

tmnx eq port
sonet alarm
clear

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.4
onet-alarm-v2

SONET/SDH port alarm condition


is detected.

tmnx eq port
sonet alarm

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
r-supply-failur
e-v2

One of the chassis's power supplies


fails.

tmnx eq power
supply failure

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.4
r-supply-insert
ed-v2

One of the chassis's power supplies


is inserted.

tmnx eq power
supply
inserted

tmnx-eq-powe
r-supply-remo
ved-v2

One of the chassis's power supplies


is removed.

tmnx eq power
supply
removed

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

tmnx-state-cha 1.3.6.1.4.1.6527.3.1.3.1.0.11
nge-v2

There is a change in either the


tmnx state
adminstrative or operational state of change
a MIB table entry.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-14

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7705 SAR V2 Traps

Table 10-5

Alcatel-Lucent 7705 SAR V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

cold-start-v2

1.3.6.1.6.3.1.1.5.1

MIB2 V2 cold start trap

alcatel Cold
start trap

warm-start-v2

1.3.6.1.6.3.1.1.5.2

MIB2 V2 warm start trap

alcatel Warm
start trap

link-down-v2

1.3.6.1.6.3.1.1.5.3

MIB2 V2 link down

alcatel Link
down trap

link-up-v2

1.3.6.1.6.3.1.1.5.4

MIB2 V2 link up

alcatel Link up
trap

bgpEstablishe
d

1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

alcatel BGP
established
trap

bgpBackward
Transition

1.3.6.1.2.1.15.7.2

NA

The BGPBackwardTransition Event alcatel BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

NA

Description

Short
Description

Trap Name

ospf-if-auth-fa 1.3.6.1.2.1.14.16.2.6
ilure

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

ospf-if-config- 1.3.6.1.2.1.14.16.2.4
error

ospf if config error trap

alcatel OSPF
if config error
trap

ospf-if-rx-bad- 1.3.6.1.2.1.14.16.2.8
packet

ospf if rx bad packet trap

alcatel OSPF
if rx bad
packet trap

ospf-if-state-c
hanged

ospf if state change trap

alcatel OSPF
if state change
trap

1.3.6.1.2.1.14.16.2.16

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-15

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V1 Traps

Alcatel-Lucent 7750/7710 SR V1 Traps


Table 10-6 lists the Alcatel-Lucent 7750/7710 SR V1 traps supported in Cisco ANA. For associated
event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or
see Table 10-32.
Table 10-6

Alcatel-Lucent 7750/7710 SR V1 Traps

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value
Description

Short Description

hdsl2shdsl-perf-ses- 1.3.6.1.2.1.10.48.0.4
thresh

hdsl2shdsl perf ses


thresh trap

alcatel Hdsl2shdsl perf ses


thresh trap

dlsw-trap-circuit-do 1.3.6.1.2.1.46.1.0
wn

dlsw trap circuit down


trap

alcatel DLSW circuit down


trap

dlsw-trap-tconn-do
wn

dlsw trap tconn down


trap

alcatel DLSW tconn down


trap

1.3.6.1.2.1.46.1.0

dlsw-trap-tconn-part 1.3.6.1.2.1.46.1.0.1
ner-reject

dlsw trap tconn partner alcatel DLSW tconn partner


reject trap
reject trap

dlsw-trap-tconn-pro
t-violation

1.3.6.1.2.1.46.1.0.2

dlsw trap tconn prot


violation trap

fr-dlci-status-chang
e

1.3.6.1.2.1.10.32.2.1

Frame-Relay dlci status alcatel FR DLCI status


change trap
change trap

hdsl2shdsl-local-po
wer-loss

1.3.6.1.2.1.10.48.0.16

hdsl2shdsl local power


loss trap

alcatel Hdsl2shdsl local


power loss trap

hdsl2shdsl-loop-atte 1.3.6.1.2.1.10.48.0.1
n-crossing

hdsl2shdsl loop attend


crossing trap

alcatel Hdsl2shdsl loop


atten crossing trap

hdsl2shdsl-loopback 1.3.6.1.2.1.10.48.0.9
-failure

hdsl2shdsl loopback
failure trap

alcatel Hdsl2shdsl loopback


failure trap

hdsl2shdsl-no-neigh 1.3.6.1.2.1.10.48.0.15
bor-present

hdsl2shdsl no neighbor alcatel Hdsl2shdsl loopback


present trap
failure trap

hdsl2shdsl-perf-crc- 1.3.6.1.2.1.10.48.0.5
anomalies-thresh

hdsl2shdsl perf crc


anomalies thresh trap

alcatel Hdsl2shdsl perf crc


anomalies thresh trap

hdsl2shdsl-perf-es-t
hresh

hdsl2shdsl perf es
thresh trap

alcatel Hdsl2shdsl perf es


thresh trap

hdsl2shdsl-perf-los- 1.3.6.1.2.1.10.48.0.6
ws-thresh

hdsl2shdsl perf los ws


thresh trap

alcatel Hdsl2shdsl perf los


ws thresh trap

hdsl2shdsl-perf-uas- 1.3.6.1.2.1.10.48.0.7
thresh

hdsl2shdsl perf uas


thresh trap

alcatel Hdsl2shdsl perf uas


thresh trap

hdsl2shdsl-power-b
ack-off

hdsl2shdsl power back


off trap

alcatel Hdsl2shdsl power


back off trap

1.3.6.1.2.1.10.48.0.3

1.3.6.1.2.1.10.48.0.10

alcatel DLSW tconn prot


violation trap

hdsl2shdsl-protocol- 1.3.6.1.2.1.10.48.0.14
init-failure

hdsl2shdsl protocol init alcatel Hdsl2shdsl protocol


failure trap
init failure trap

hdsl2shdsl-snr-marg 1.3.6.1.2.1.10.48.0.2
in-crossing

hdsl2shdsl snr margin


crossing trap

alcatel Hdsl2shdsl snr


margin crossing trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-16

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V1 Traps

Table 10-6

Alcatel-Lucent 7750/7710 SR V1 Traps

Subtype
Varbind
OID

Trap Name

Trap OID

hdsl2shdsl-span-inv
alid-num-repeaters

1.3.6.1.2.1.10.48.0.8

Subtype
Varbind
Value
Description

Short Description

hdsl2shdsl span invalid alcatel Hdsl2shdsl span


num repeaters trap
invalid num repeaters trap

hdsl2shdsl-config-in 1.3.6.1.2.1.10.48.0.13
it-failure

hdsl2shdsl config init


failure trap

alcatel Hdsl2shdsl config


init failure trap

hdsl2shdsl-dc-conti
nuity-fault

1.3.6.1.2.1.10.48.0.12

hdsl2shdsl dc
continuity fault trap

alcatel Hdsl2shdsl dc
continuity fault trap

ent-config-change

1.3.6.1.2.1.47.2.0.1

ent config change trap

alcatel Ent config change

new-root

1.3.6.1.2.1.17.0.1

New root trap

alcatel New Root trap

ospf-if-auth-failure

1.3.6.1.2.1.14.16.2.6

ospf if auth failure trap alcatel OSPF if auth failure


trap

ospf-if-config-error

1.3.6.1.2.1.14.16.2.4

ospf if config error trap alcatel OSPF if config error


trap

ospf-if-rx-bad-packe 1.3.6.1.2.1.14.16.2.8
t

ospf if rx bad packet


trap

ospf-if-state-change 1.3.6.1.2.1.14.16.2.16

ospf if state change trap alcatel OSPF if state change


trap

ospf-lsdb-approachi
ng-overflow

1.3.6.1.2.1.14.16.2.15

ospf lsdb approaching


overflow trap

ospf-lsdb-overflow

1.3.6.1.2.1.14.16.2.14

ospf lsdb overflow trap alcatel OSPF lsdb


approaching overflow trap

ospf-max-age-lsa

1.3.6.1.2.1.14.16.2.13

ospf max age lsa trap

alcatel OSPF max age lsa


trap

ospf-nbr-state-chang 1.3.6.1.2.1.14.16.2.2
e

ospf nbr state change


trap

alcatel OSPF nbr state


change trap

ospf-originate-lsa

1.3.6.1.2.1.14.16.2.12

ospf originate lsa trap

alcatel OSPF originate lsa


trap

ospf-tx-retransmit

1.3.6.1.2.1.14.16.2.10

ospf tx retransmit trap

alcatel OSPF tx retransmit


trap

ospf-virt-if-auth-fail 1.3.6.1.2.1.14.16.2.7
ure

ospf virt if auth failure


trap

alcatel OSPF virt if auth


failure trap

ospf-virt-if-config-e 1.3.6.1.2.1.14.16.2.5
rror

ospf virt if config error alcatel OSPF virt if config


trap
error trap

ospf-virt-if-rx-bad-p 1.3.6.1.2.1.14.16.2.9
acket

ospf virt if rx bad


packet trap

ospf-virt-if-state-ch
ange

ospf virt if state change alcatel OSPF virt if state


trap
change trap

1.3.6.1.2.1.14.16.2.1

alcatel OSPF if rx bad


packet trap

alcatel OSPF lsdb


approaching overflow trap

alcatel OSPF virt if rx bad


packet trap

ospf-virt-if-tx-retran 1.3.6.1.2.1.14.16.2.11
smit

ospf virt if tx retransmit alcatel OSPF virt if tx


trap
retransmit trap

ospf-virt-nbr-state-c 1.3.6.1.2.1.14.16.2.3
hange

ospf virt nbr state


change trap

alcatel OSPF virt nbr state


change trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-17

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V2 Traps

Table 10-6

Alcatel-Lucent 7750/7710 SR V1 Traps

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value
Description

Short Description

tcp connection table 1.3.6.1.2.1.6.13.1

tcp connection table2


trap - DUMP

alcatel TCP connection


table trap

vrrp-trap-auth-failur 1.3.6.1.2.1.68.0.2
e

vrrp trap auth failure


trap

alcatel Vrrp trap auth


failure trap

vrrp-trap-new-maste 1.3.6.1.2.1.68.0.1
r

vrrp trap new master


trap

alcatel Vrrp trap new


master trap

x25-reset

1.3.6.1.2.1.10.5.0.2

x25 reset trap

alcatel X25 reset trap

x25-restart

1.3.6.1.2.1.10.5.0.2

x25 restart trap

alcatel X25 restart trap

MIB2 V1
authentication-failure
trap

alcatel Authentication
failure trap

authentication-failur 1.3.6.1.4.1
e

Alcatel-Lucent 7750/7710 SR V2 Traps


Table 10-7 lists the Alcatel-Lucent 7750/7710 SR V2 traps supported in Cisco ANA. For associated
event types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or
see Table 10-34.
Table 10-7

Alcatel-Lucent 7750/7710 SR V2 Traps

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

sbi-boot-confi
g-v2

1.3.6.1.4.1.6527.3.1.3.1.0.4

Completed the configuration phase


following a system reboot.

sbi boot config

sbi-boot-snmp
d-v2

1.3.6.1.4.1.6527.3.1.3.1.0.5

Completed the SNMP daemon


initialization following a system
reboot.

sbi boot
snmpd

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.3
failed-v2

Saving of configuration is stopped


due to errors.

ssi saveconfig
failed

ssi-saveconfig- 1.3.6.1.4.1.6527.3.1.3.1.0.2
succeeded-v2

Saving of configuration finished


without errors.

ssi saveconfig
succeeded

tmnx-config-cr 1.3.6.1.4.1.6527.3.1.3.1.0.9
eate-v2

New row entry is created in one of


the MIB tables.

tmnx config
create

tmnx-config-d
elete-v2

An existing row entry in one of the


MIB tables is deleted.

tmnx config
delete

1.3.6.1.4.1.6527.3.1.3.1.0.10

tmnx-config-m 1.3.6.1.4.1.6527.3.1.3.1.0.8
odify-v2

Description

Short
Description

Trap Name

A configuration attribute associated tmnx config


modify
with a row entry in a MIB table is
modified

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-18

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V2 Traps

Table 10-7

Alcatel-Lucent 7750/7710 SR V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap Name

Trap OID

tmnx-env-tem
p-too-high-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.2

Description

Short
Description

Temperature sensor reading on an


equipment object is greater than its
configured threshold

tmnx env temp


too high

tmnx-eq-fan-fa 1.3.6.1.4.1.6527.3.1.3.2.1.0.6
ilure-v2

One of the fans in a fan tray has


failed

tmnx eq fan
failure

tmnx-eq-flash- 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
disk-full-v2
3

No space left on the compact flash

tmnx eq flash
disk full

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds1-alarm-clea 8
r-v2

DS1 interface alarm condition is


cleared

tmnx eq port
ds1 alarm
clear

tmnx-eq-portds1-alarm-v2

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
7

DS1 interface alarm condition is


detected

tmnx eq port
ds1 alarm

tmnx-eq-port- 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
ds3-alarm-clea 6
r-v2

DS3 interface alarm condition is


cleared

tmnx eq port
ds3 alarm
clear

tmnx-eq-portds3-alarm-v2

DS3 interface alarm condition is


detected

tmnx eq port
ds3 alarm

1.3.6.1.4.1.6527.3.1.3.2.2.0.1
5

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.1
rror-v2
4

Error listed in tmnxPortNotifyError tmnx eq port


is detected on the port
error

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-cle 3
ar-v2

Ethernet port alarm condition is


cleared

tmnx eq port
ether alarm
clear

tmnx-eq-port-e 1.3.6.1.4.1.6527.3.1.3.2.2.0.2
ther-alarm-v2 2

Ethernet port alarm condition is


detected

tmnx eq port
ether alarm

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.8
fp-inserted-v2

SFP is inserted in the port

tmnx eq port
sfp inserted

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.9
fp-removed-v2

SFP is removed from the port

tmnx eq port
sfp removed

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.5
onet-alarm-cle
ar-v2

SONET/SDH port alarm condition


is cleared

tmnx eq port
sonet alarm
clear

tmnx-eq-port-s 1.3.6.1.4.1.6527.3.1.3.2.2.0.4
onet-alarm-v2

SONET/SDH port alarm condition


is detected

tmnx eq port
sonet alarm

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.3
r-supply-failur
e-v2

One of the chassis's power supplies


fails

tmnx eq power
supply failure

tmnx-eq-powe 1.3.6.1.4.1.6527.3.1.3.2.1.0.4
r-supply-insert
ed-v2

One of the chassis's power supplies


is inserted

tmnx eq power
supply
inserted

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-19

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V2 Traps

Table 10-7

Alcatel-Lucent 7750/7710 SR V2 Traps (Continued)

Trap Name

Trap OID

tmnx-eq-powe
r-supply-remo
ved-v2

1.3.6.1.4.1.6527.3.1.3.2.1.0.5

Subtype Subtype
Varbind Varbind
OID
Value

Description
One of the chassis's power supplies
is removed

Short
Description
tmnx eq power
supply
removed

tmnx-state-cha 1.3.6.1.4.1.6527.3.1.3.1.0.11
nge-v2

There is a change in either the


tmnx state
adminstrative or operational state of change
a MIB table entry

cold start trap

MIB2 V2 cold start trap

alcatel Cold
start trap

warm start trap 1.3.6.1.6.3.1.1.5.2

MIB2 V2 warm start trap

alcatel Warm
start trap

link down trap 1.3.6.1.6.3.1.1.5.3

MIB2 V2 link down

alcatel Link
down trap

link Up trap

1.3.6.1.6.3.1.1.5.4

MIB2 V2 link up

alcatel Link up
trap

bgpEstablishe
d

1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

alcatel BGP
established
trap

bgpBackward
Transition

1.3.6.1.2.1.15.7.2

NA

The BGPBackwardTransition Event alcatel BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

1.3.6.1.6.3.1.1.5.1

NA

ospf-if-auth-fa 1.3.6.1.2.1.14.16.2.6
ilure

ospf if auth failure trap

alcatel OSPF
if auth failure
trap

ospf-if-config- 1.3.6.1.2.1.14.16.2.4
error

ospf if config error trap

alcatel OSPF
if config error
trap

ospf-if-rx-bad- 1.3.6.1.2.1.14.16.2.8
packet

ospf if rx bad packet trap

alcatel OSPF
if rx bad
packet trap

ospf-if-state-c
hanged

ospf if state change trap

alcatel OSPF
if state change
trap

1.3.6.1.2.1.14.16.2.16

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-20

OL-24429-01

Chapter 10

Traps
Calix V2 Traps

Calix V2 Traps
Table 10-8 lists the Calix V2 traps supported in Cisco ANA. For associated event types, event subtypes,
and Cisco ANA registry parameters, use the link under Short Description or see Table 10-35.
Table 10-8

Calix V2 Traps

Trap Name

Trap OID

Subtype
Varbind
OID

coldStart

1.3.6.1.6.3.1.1.5.1

NA

NA

A coldStart trap signifies that the


SNMPv2 entity, acting in an agent
role, is reinitializing itself and that
its configuration may have been
altered.

Cold start trap

linkDown

1.3.6.1.6.3.1.1.5.3

NA

NA

A linkDown trap signifies that the


SNMPv2 entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
transition into the down state.

SNMP Link
down

linkUp

1.3.6.1.6.3.1.1.5.4

NA

NA

A linkUp trap signifies that the


SNMPv2 entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links has
transitioned out of the down state.

SNMP Link
up

powerMgmtPo 1.3.6.1.4.1.6066.2.1.1.2.2.0.1 1.3.6.1.


werSourceCha
4.1.606
6.2.1.1.
nge
2.1.2

The current source of power to the


unit is changed to main power.

Power source
changed to
Main power

powerMgmtPo 1.3.6.1.4.1.6066.2.1.1.2.2.0.1 1.3.6.1.


4.1.606
werSourceCha
nge
6.2.1.1.
2.1.2

The current source of power to the


unit is changed to battery power.

Power source
changed to
Battery power

epsRingFailov
erNotification

1.3.6.1.4.1.6066.2.1.2.1.2.2.1 NA

NA

This trap is sent when an eps ring


failover occurs.

eps Ring
Failover
Notification

epsRingRevert 1.3.6.1.4.1.6066.2.1.2.1.2.2.2 NA
Notification

NA

This trap is sent when an eps ring


reverts to the preferred path group.

eps Ring
Revert
Notification

epsPathGroup 1.3.6.1.4.1.6066.2.1.2.1.2.2.3 1.3.6.1.


HeartbeatNotif
4.1.606
ication
6.2.1.2.
1.2.1.2.
1.2

This trap is sent when an eps path


group heartbeat status changes to
up.

eps Path
Group
Heartbeat Up
Notification

Subtype
Varbind
Value

Description

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-21

Chapter 10

Traps

Calix V2 Traps

Table 10-8

Calix V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short Description

epsPathGroup 1.3.6.1.4.1.6066.2.1.2.1.2.2.3 1.3.6.1.


HeartbeatNotif
4.1.606
ication
6.2.1.2.
1.2.1.2.
1.2

This trap is sent when an eps path


group heartbeat status changes to
down.

eps Path
Group
Heartbeat
Down
Notification

epsLoopNotifi 1.3.6.1.4.1.6066.2.1.2.1.3.2.1 1.3.6.1.


cation
4.1.606
6.2.1.2.
1.3.1.1.
1.2

This trap is sent when an eps loop


notification is detected.

eps Loop
Notification
detected

epsLoopNotifi 1.3.6.1.4.1.6066.2.1.2.1.3.2.1 1.3.6.1.


cation
4.1.606
6.2.1.2.
1.3.1.1.
1.2

This trap is sent when an eps loop


notification is cleared.

eps Loop
Notification
cleared

acPowerNotifi
cation

1.3.6.1.4.1.6066.2.1.3.4.2.3

1.3.6.1.
4.1.606
6.2.1.3.
4.1.1

Indicates the status of the ac power


as on

ac power
status changed
to on

acPowerNotifi
cation

1.3.6.1.4.1.6066.2.1.3.4.2.3

1.3.6.1.
4.1.606
6.2.1.3.
4.1.1

Indicates the status of the ac power


as off

ac power
status changed
to off

fanTrayNotific 1.3.6.1.4.1.6066.2.1.3.4.2.4
ation

1.3.6.1.
4.1.606
6.2.1.3.
4.1.2

Indicates the status of the fan tray as fan tray


inserted
inserted

fanTrayNotific 1.3.6.1.4.1.6066.2.1.3.4.2.4
ation

1.3.6.1.
4.1.606
6.2.1.3.
4.1.2

Indicates the status of the fan tray as fan tray


removed
removed

bviInvalidDhc 1.3.6.1.4.1.6066.2.1.3.4.2.5
pAddressNotif
ication

1.3.6.1.
4.1.606
6.2.1.3.
4.1.4.1.
2

Indicates bvi invalid dhcp address.

bvi invalid
dhcp address
alarm

bviInvalidDhc 1.3.6.1.4.1.6066.2.1.3.4.2.5
pAddressNotif
ication

1.3.6.1.
4.1.606
6.2.1.3.
4.1.4.1.
2

Indicates the bvi invalid dhcp


address has been cleared.

bvi invalid
dhcp address
cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-22

OL-24429-01

Chapter 10

Traps
Calix V2 Traps

Table 10-8

Trap Name

Calix V2 Traps (Continued)

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short Description

subscriberPort 1.3.6.1.4.1.6066.2.1.2.4.2.2.1 1.3.6.1.


BlackListingN
4.1.606
otification
6.2.1.2.
4.2.1.9.
1.6

disabled

This trap is sent when a Blacklisting subscriber


event occurs.
port black
listing
disabled

subscriberPort 1.3.6.1.4.1.6066.2.1.2.4.2.2.1 1.3.6.1.


BlackListingN
4.1.606
otification
6.2.1.2.
4.2.1.9.
1.6

cleared

This trap is sent when a Blacklisting subscriber


event is cleared.
port black
listing cleared

clientQueueTh 1.3.6.1.4.1.6066.2.1.2.4.2.2.2 1.3.6.1.


resholdNotific
4.1.606
ation
6.2.1.2.
4.2.1.1

This trap is sent when a Client


Queue threshold is reached.

client queue
threshold
reached

clientQueueTh 1.3.6.1.4.1.6066.2.1.2.4.2.2.2 1.3.6.1.


4.1.606
resholdNotific
ation
6.2.1.2.
4.2.1.1

This trap is sent when a Client


Queue threshold is cleared.

client queue
threshold
cleared

clientQueuePa 1.3.6.1.4.1.6066.2.1.2.4.2.2.3 1.3.6.1.


4.1.606
cketDropNotif
6.2.1.2.
ication
4.2.1.2

This trap is sent when Client Queue client queue


packets are dropped.
packet drop

clientQueuePa 1.3.6.1.4.1.6066.2.1.2.4.2.2.3 1.3.6.1.


cketDropNotif
4.1.606
6.2.1.2.
ication
4.2.1.2

This trap is sent when Client Queue client queue


packet no
packets are no longer being
longer
dropped.
dropping

ingressFilterM 1.3.6.1.4.1.6066.2.1.2.4.2.2.4 1.3.6.1.


askThreshold
4.1.606
Notification
6.2.1.2.
4.2.1.5

Indicates if the upper threshold of


ingress filter
the ingress filter mask resources has mask
been reached.
threshold
reached

ingressFilterM 1.3.6.1.4.1.6066.2.1.2.4.2.2.4 1.3.6.1.


askThreshold
4.1.606
Notification
6.2.1.2.
4.2.1.5

Indicates if the upper threshold of


ingress filter
the ingress filter mask resources has mask
been cleared.
threshold
cleared

ingressFilterM 1.3.6.1.4.1.6066.2.1.2.4.2.2.5 1.3.6.1.


askResources
4.1.606
Notification
6.2.1.2.
4.2.1.6

Indicates if the ingress filter mask


resources have been exhausted.

ingress filter
mask
resources
exhausted

ingressFilterM 1.3.6.1.4.1.6066.2.1.2.4.2.2.5 1.3.6.1.


askResources
4.1.606
Notification
6.2.1.2.
4.2.1.6

Indicates if the ingress filter mask


resources are not exhausted.

ingress filter
mask
resources
notExhausted

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-23

Chapter 10

Traps

Calix V2 Traps

Table 10-8

Trap Name

Calix V2 Traps (Continued)

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short Description

ingressFilterR 1.3.6.1.4.1.6066.2.1.2.4.2.2.6 1.3.6.1.


uleThresholdN
4.1.606
otification
6.2.1.2.
4.2.1.7

Indicates if the upper threshold of


the ingress filter rule resources has
been reached.

ingress filter
rule threshold
reached

ingressFilterR 1.3.6.1.4.1.6066.2.1.2.4.2.2.6 1.3.6.1.


uleThresholdN
4.1.606
otification
6.2.1.2.
4.2.1.7

Indicates if the upper threshold of


the ingress filter rule resources has
been cleared.

ingress filter
rule threshold
cleared

ingressFilterR 1.3.6.1.4.1.6066.2.1.2.4.2.2.7 1.3.6.1.


uleResourcesN
4.1.606
otification
6.2.1.2.
4.2.1.8

Indicates if the ingress filter rule


resources have been exhausted.

ingress filter
rule resources
exhausted

ingressFilterR 1.3.6.1.4.1.6066.2.1.2.4.2.2.7 1.3.6.1.


uleResourcesN
4.1.606
otification
6.2.1.2.
4.2.1.8

Indicates if the ingress filter rule


resources are not exhausted.

ingress filter
rule resources
notExhausted

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

HighLimit Indicates if the fan high limit


Exceeded, threshold has been exceeded
4

fan high limit


exceeded

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

LowLimit Indicates if the fan low limit


Exceeded, threshold has been exceeded
4

fan low limit


exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-24

OL-24429-01

Chapter 10

Traps
Calix V2 Traps

Table 10-8

Trap Name

Calix V2 Traps (Continued)

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short Description

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

Cleared, 4 Indicates if the fan limit threshold


exceeded has been cleared.

fan limit
exceeded
cleared

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7

FanFastSp Indicates fan fast speed


eed

fan fast speed

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7

FanSlowS Indicates fan slow speed


peed

fan slow speed

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

HighLimit Indicates if the temp high limit


Exceeded, threshold has been exceeded
3

temp high
limit exceeded

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

LowLimit Indicates if the temp low limit


Exceeded, threshold has been exceeded
3

temp low limit


exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-25

Chapter 10

Traps

Calix V2 Traps

Table 10-8

Trap Name

Calix V2 Traps (Continued)

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short Description

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

Cleared, 3 Indicates if the temperature limit


threshold exceeded has been
cleared.

temp limit
exceeded
cleared

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

HighLimit Indicates if the voltage high limit


Exceeded, threshold has been exceeded
2

voltage high
limit exceeded

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

LowLimit Indicates if the voltage low limit


Exceeded, threshold has been exceeded
2

voltage low
limit exceeded

sensorThresho 1.3.6.1.4.1.6066.2.1.3.2.2.0.1 1.3.6.1.


ldNotification
4.1.606
6.2.1.3.
2.1.1.1.
1.7,
1.3.6.1.
4.1.606
6.2.1.3.
2.1.1.1.
1.3

Cleared, 2 Indicates if the voltage limit


threshold exceeded has been
cleared.

voltage limit
exceeded
cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-26

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-8

Trap Name

Calix V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short Description

dslModemSho 1.3.6.1.4.1.6066.2.1.2.3.2.2.1 1.3.6.1.


4.1.606
wtimeNotificat
ion
6.2.1.2.
3.2.1.1.
1.2

Indicates if the dsl modem is


operational

dsl modem
showtime in

dslModemSho 1.3.6.1.4.1.6066.2.1.2.3.2.2.1 1.3.6.1.


wtimeNotificat
4.1.606
ion
6.2.1.2.
3.2.1.1.
1.2

Indicates if the dsl modem is down

dsl modem
showtime out

DragonWave Horizon Series V2 Traps


Table 10-9 lists the DragonWave Horizon Series V2 traps supported in Cisco ANA. For associated event
types, event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-36.
Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Trap Name

Trap OID

hzOdu Cold Start


Trap

1.3.6.1.4.1.7262.2.2.21.0

hzOdu Link Down


Trap

1.3.6.1.4.1.7262.2.2.21.1

Short Description

DragonWave Cold Start

DragonWave Cold
Start

1.3.6 1
.1.2.
1.2.2
.1.1

DragonWave Link Down

DragonWave Link
Down

hzOdu Link Up Trap 1.3.6.1.4.1.7262.2.2.21.2

1.3.6 1
.1.2.
1.2.2
.1.1

DragonWave Link Up

DragonWave Link Up

hzOdu Sntp Servers


Unreachable Trap

NA

1.3.6.1.4.1.7262.2.2.21.11

NA SNTP Servers Unreachable SNTP Servers


Unreachable

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-27

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzOdu Sntp Servers


Unreachable
Cleared Trap

1.3.6.1.4.1.7262.2.2.21.12

NA

NA SNTP Servers Unreachable SNTP Servers


Cleared
Unreachable Cleared

1.3.6.1.4.1.7262.2.2.21.14
hzOdu EnetPort1
Dropped Frames
Threshold Exceeded
Trap

NA

NA Dropped Frames Threshold Dropped Frames


Exceeded
Threshold Exceeded

1.3.6.1.4.1.7262.2.2.21.15
hzOdu EnetPort1
Dropped Frames
Threshold Exceeded
Cleared Trap

NA

NA Dropped Frames Threshold Dropped Frames


Exceeded Cleared
Threshold Exceeded
Cleared

hzOdu Modem1 Rx
LossOfSignal Trap

1.3.6.1.4.1.7262.2.2.21.22

NA

NA Modem Rx LOS Lock

Modem Rx LOS Lock

hzOdu Modem1 Rx
LossOfSignal
Cleared Trap

1.3.6.1.4.1.7262.2.2.21.23

NA

NA Modem Rx LOS Lock


Cleared

Modem Rx LOS Lock


Cleared

hzOdu Modem1 Snr 1.3.6.1.4.1.7262.2.2.21.26


Below Threshold
Trap

NA

NA Modem SNR Below


Threshold

Modem SNR Below


Threshold

hzOdu Modem1 Snr 1.3.6.1.4.1.7262.2.2.21.27


Below Threshold
Cleared Trap

NA

NA Modem SNR Below


Threshold Cleared

Modem SNR Below


Threshold Cleared

hzOdu Modem1
Equalizer Stress
Exceed Threshold
Trap

1.3.6.1.4.1.7262.2.2.21.28

NA

NA Modem Equalizer Stress


Exceed Threshold

Modem Equalizer
Stress Exceed
Threshold

hzOdu Modem1
Equalizer Stress
Exceed Threshold
Cleared Trap

1.3.6.1.4.1.7262.2.2.21.29

NA

NA Modem Equalizer Stress


Exceed Threshold Cleared

Modem Equalizer
Stress Exceed
Threshold Cleared

hzOdu Modem1
Channelized Rsl
Below Threshold
Trap

1.3.6.1.4.1.7262.2.2.21.30

NA

NA Channelized RSL Below


Threshold

Channelized RSL
Below Threshold

hzOdu Modem1
Channelized Rsl
Below Threshold
Trap Cleared

1.3.6.1.4.1.7262.2.2.21.31

NA

NA Channelized RSL Below


Threshold Cleared

Channelized RSL
Below Threshold
Cleared

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-28

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Trap OID

Short Description

hzOdu Modem1
1.3.6.1.4.1.7262.2.2.21.32
Hardware Fault Trap

NA

NA Modem Hardware Fault

Modem Hardware
Fault

hzOdu Modem1
Hardware Fault
Cleared Trap

1.3.6.1.4.1.7262.2.2.21.33

NA

NA Modem Hardware Fault


Cleared

Modem Hardware
Fault Cleared

hzOdu Tty Session


Commenced

1.3.6.1.4.1.7262.2.2.21.46

NA

NA User Session Commenced

User Session
Commenced

hzOdu Tty Session


Terminated

1.3.6.1.4.1.7262.2.2.21.47

NA

NA User Session Terminated

User Session
Terminated

hzOdu Partner
Redundancy Mode
Mismatch

1.3.6.1.4.1.7262.2.2.21.50

NA

NA Partner Redundancy Mode


Mismatch

Partner Redundancy
Mode Mismatch

hzOdu Partner
Redundancy Mode
Mismatch Cleared

1.3.6.1.4.1.7262.2.2.21.51

NA

NA Partner Redundancy Mode


Mismatch Cleared

Partner Redundancy
Mode Mismatch
Cleared

hzOdu Partner
Configuration
Mismatch Trap

1.3.6.1.4.1.7262.2.2.21.52

NA

NA Partner Configuration
Mismatch

Partner Configuration
Mismatch

hzOdu Partner
Configuration
Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.53

NA

NA Partner Configuration
Mismatch Cleared

Partner Configuration
Mismatch Cleared

hzOdu Hsb Active


On Secondary Trap

1.3.6.1.4.1.7262.2.2.21.54

NA

NA HSB Active On Secondary

HSB Active On
Secondary

hzOdu Hsb Active


On Secondary
Cleared Trap

1.3.6.1.4.1.7262.2.2.21.55

NA

NA HSB Active On Secondary


Cleared

HSB Active On
Secondary Cleared

hzOdu Hsb Override 1.3.6.1.4.1.7262.2.2.21.56


By User Trap

NA

NA HSB Override By User

HSB Override By User

hzOdu Hsb Override 1.3.6.1.4.1.7262.2.2.21.57


By User Cleared
Trap

NA

NA HSB Override By User


Cleared

HSB Override By User


Cleared

hzOdu Hsb
CrossLink Trap

1.3.6.1.4.1.7262.2.2.21.58

NA

NA HSB Cross Link

HSB Cross Link

hzOdu Hsb
CrossLink Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.59

NA

NA HSB Cross Link Cleared

HSB Cross Link


Cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-29

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzOdu Hsb Active


OnPrimary Trap

1.3.6.1.4.1.7262.2.2.21.60

NA

NA HSB Active On Primary

HSB Active On
Primary

hzOdu Hsb Active


OnPrimary Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.61

NA

NA HSB Active On Primary


Cleared

HSB Active On
Primary Cleared

1.3.6.1.4.1.7262.2.2.21.62
hzOduEnetPort
Queue1DroppedFra
mesThresholdExcee
ded Trap

NA

NA Ethernet Port1 Queue1


Ethernet Port1 Queue1
Dropped Frames Threshold Dropped Frames
Exceeded
Threshold Exceeded

hzOduEnetPort1Qu
eue1DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.63

NA

NA Ethernet Port1 Queue1


Ethernet Port1 Queue1
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue2DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.64

NA

NA Ethernet Port1 Queue2


Ethernet Port1 Queue2
Dropped Frames Threshold Dropped Frames
Threshold Exceeded
Exceeded

hzOduEnetPort1Qu
eue2DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.65

NA

Ethernet Port1 Queue2


NA Ethernet Port1 Queue2
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue3DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.66

NA

Ethernet Port1 Queue3


NA Ethernet Port1 Queue3
Dropped Frames Threshold Dropped Frames
Threshold Exceeded
Exceeded

hzOduEnetPort1Qu
eue3DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.67

NA

NA Ethernet Port1 Queue3


Ethernet Port1 Queue3
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue4DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.68

NA

NA Ethernet Port1 Queue4


Ethernet Port1 Queue4
Dropped Frames Threshold Dropped Frames
Exceeded
Threshold Exceeded

hzOduEnetPort1Qu
eue4DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.69

NA

NA Ethernet Port1 Queue4


Ethernet Port1 Queue4
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-30

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzOduEnetPort1Qu
eue5DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.70

NA

NA Ethernet Port1 Queue5


Ethernet Port1 Queue5
Dropped Frames Threshold Dropped Frames
Exceeded
Threshold Exceeded

hzOduEnetPort1Qu
eue5DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.71

NA

NA Ethernet Port1 Queue5


Ethernet Port1 Queue5
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue6DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.72

NA

NA Ethernet Port1 Queue6


Ethernet Port1 Queue6
Dropped Frames Threshold Dropped Frames
Exceeded
Threshold Exceeded

hzOduEnetPort1Qu
eue6DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.73

NA

Ethernet Port1 Queue6


NA Ethernet Port1 Queue6
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue7DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.74

NA

Ethernet Port1 Queue7


NA Ethernet Port1 Queue7
Dropped Frames Threshold Dropped Frames
Threshold Exceeded
Exceeded

hzOduEnetPort1Qu
eue7DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.75

NA

Ethernet Port1 Queue7


NA Ethernet Port1 Queue7
Dropped Frames Threshold Dropped Frames
Threshold Exceeded
Exceeded Cleared
Cleared

hzOduEnetPort1Qu
eue8DroppedFrame
sThresholdExceede
d Trap

1.3.6.1.4.1.7262.2.2.21.76

NA

NA Ethernet Port1 Queue8


Ethernet Port1 Queue8
Dropped Frames Threshold Dropped Frames
Exceeded
Threshold Exceeded

hzOduEnetPort1Qu
eue8DroppedFrame
sThresholdExceede
d Cleared Trap

1.3.6.1.4.1.7262.2.2.21.77

NA

NA Ethernet Port1 Queue8


Ethernet Port1 Queue8
Dropped Frames Threshold Dropped Frames
Exceeded Cleared
Threshold Exceeded
Cleared

hzOduEnetPort1Qu
eue1DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.78

NA

NA Ethernet Port1 Queue1


Ethernet Port1 Queue1
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue1DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.79

NA

NA Ethernet Port1 Queue1


Ethernet Port1 Queue1
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-31

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzOduEnetPort1Qu
eue2DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.80

NA

NA Ethernet Port1 Queue2


Ethernet Port1 Queue2
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue2DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.81

NA

NA Ethernet Port1 Queue2


Ethernet Port1 Queue2
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOduEnetPort1Qu
eue3DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.82

NA

NA Ethernet Port1 Queue3


Ethernet Port1 Queue3
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue3DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.83

NA

NA Ethernet Port1 Queue3


Ethernet Port1 Queue3
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOduEnetPort1Qu
eue4DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.84

NA

NA Ethernet Port1 Queue4


Ethernet Port1 Queue4
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue4DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.85

NA

NA Ethernet Port1 Queue4


Ethernet Port1 Queue4
Depth Threshold Exceeded Depth Threshold
Exceeded Cleared
Cleared

hzOduEnetPort1Qu
eue5DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.86

NA

NA Ethernet Port1 Queue5


Ethernet Port1 Queue5
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue5DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.87

NA

NA Ethernet Port1 Queue5


Ethernet Port1 Queue5
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOduEnetPort1Qu
eue6DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.88

NA

NA Ethernet Port1 Queue6


Ethernet Port1 Queue6
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue6DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.89

NA

NA Ethernet Port1 Queue6


Ethernet Port1 Queue6
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOduEnetPort1Qu
eue7DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.90

NA

NA Ethernet Port1 Queue7


Ethernet Port1 Queue7
Depth Threshold Exceeded Depth Threshold
Exceeded

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-32

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzOduEnetPort1Qu
eue7DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.91

NA

NA Ethernet Port1 Queue7


Ethernet Port1 Queue7
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOduEnetPort1Qu
eue8DepthThreshol
dExceeded Trap

1.3.6.1.4.1.7262.2.2.21.92

NA

NA Ethernet Port1 Queue8


Ethernet Port1 Queue8
Depth Threshold Exceeded Depth Threshold
Exceeded

hzOduEnetPort1Qu
eue8DepthThreshol
dExceeded Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.93

NA

NA Ethernet Port1 Queue8


Ethernet Port1 Queue8
Depth Threshold Exceeded Depth Threshold
Cleared
Exceeded Cleared

hzOdu Haam Config 1.3.6.1.4.1.7262.2.2.21.94


MisMatch Trap

NA

NA HAAM Configuration
Mismatch

HAAM Configuration
Mismatch

hzOdu Haam Config 1.3.6.1.4.1.7262.2.2.21.95


MisMatch Clear
Trap

NA

NA HAAM Configuration
Mismatch Cleared

HAAM Configuration
Mismatch Cleared

1.3.6.1.4.1.7262.2.2.21.96

NA

NA HAAM On Lower
Modulation

HAAM On Lower
Modulation

1.3.6.1.4.1.7262.2.2.21.97
hzOdu Haam
OnLower
Modulation Cleared
Trap

NA

NA HAAM On Lower
Modulation Cleared

HAAM On Lower
Modulation Cleared

hzOdu Haam Event


Trap

1.3.6.1.4.1.7262.2.2.21.98

NA

NA HAAM Event

HAAM Event

hzOdu Haam Event


Cleared Trap

1.3.6.1.4.1.7262.2.2.21.99

NA

NA HAAM Event Cleared

HAAM Event Cleared

hzOdu Atpc Config


Mismatch Trap

1.3.6.1.4.1.7262.2.2.21.9

NA

NA ATPC Config Mismatch

ATPC Config
Mismatch

hzOdu Atpc Config


Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.2.21.10

NA

NA ATPC Config Mismatch


Cleared

ATPC Config
Mismatch Cleared

hzQtm Link Down


Trap

1.3.6.1.4.1.7262.2.4.21.1

1.3.6 3
.1.2.
1.2.2
.1.1

hzOdu Haam
OnLower
Modulation Trap

DragonWave Link Down

Short Description

DragonWave Link
Down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-33

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzQtm Link Up Trap 1.3.6.1.4.1.7262.2.4.21.2

1.3.6 3
.1.2.
1.2.2
.1.1

hzQtm Atpc Config


Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.9

NA

NA ATPC Config Mismatch

ATPC Config
Mismatch

hzQtm Atpc Config


Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.10

NA

NA ATPC Config Mismatch


Cleared

ATPC Config
Mismatch Cleared

hzQtm Sntp Servers 1.3.6.1.4.1.7262.2.4.21.11


Unreachable Trap

NA

NA SNTP Servers Unreachable SNTP Servers


Unreachable

hzQtm Sntp Servers 1.3.6.1.4.1.7262.2.4.21.12


Unreachable
Cleared Trap

NA

NA SNTP Servers Unreachable SNTP Servers


Cleared
Unreachable Cleared

hzQtm Dropped
Frames Threshold
Exceeded Trap

1.3.6.1.4.1.7262.2.4.21.14

NA

NA Dropped Frames Threshold Dropped Frames


Exceeded
Threshold Exceeded

hzQtm Dropped
Frames Threshold
Exceeded Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.15

NA

NA Dropped Frames Threshold Dropped Frames


Exceeded Cleared
Threshold Exceeded
Cleared

1.3.6.1.4.1.7262.2.4.21.16
hzQtm Bw
Utilization
Threshold Exceeded
Trap

NA

NA BW Utilization Threshold
Exceeded

BW Utilization
Threshold Exceeded

1.3.6.1.4.1.7262.2.4.21.17
hzQtm Bw
Utilization
Threshold Exceeded
Cleared Trap

NA

NA BW Utilization Threshold
Exceeded Cleared

BW Utilization
Threshold Exceeded
Cleared

hzQtm Modem Rx
LossOfSignal Lock
Trap

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

1.3.6.1.4.1.7262.2.4.21.22

DragonWave Link Up

Short Description

Modem Rx LOS Lock

DragonWave Link Up

Modem Rx LOS Lock

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-34

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Modem Rx
LossOfSignal Lock
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.23

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Modem Rx LOS Lock


Cleared

Modem Rx LOS Lock


Cleared

hzQtm Modem Snr


Below Threshold
Trap

1.3.6.1.4.1.7262.2.4.21.26

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Modem SNR Below


Threshold

Modem SNR Below


Threshold

hzQtm Modem Snr


Below Threshold
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.27

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Modem SNR Below


Threshold Cleared

Modem SNR Below


Threshold Cleared

hzQtm Modem
Equalizer Stress
Exceed Threshold
Trap

1.3.6.1.4.1.7262.2.4.21.28

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Modem Equalizer Stress


Exceed Threshold

Modem Equalizer
Stress Exceed
Threshold

hzQtm Modem
Equalizer Stress
Exceed Threshold
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.29

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Modem Equalizer Stress


Exceed Threshold Cleared

Modem Equalizer
Stress Exceed
Threshold Cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-35

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Channelized
Rsl Below
Threshold Trap

1.3.6.1.4.1.7262.2.4.21.30

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Channelized RSL Below


Threshold

Channelized RSL
Below Threshold

hzQtm Channelized
Rsl Below
Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.31

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.1.1.
1.1

Channelized RSL Below


Threshold Cleared

Channelized RSL
Below Threshold
Cleared

hzQtm User Session 1.3.6.1.4.1.7262.2.4.21.34


Commenced Trap

NA

NA User Session Commenced

User Session
Commenced

hzQtm User Session 1.3.6.1.4.1.7262.2.4.21.35


Terminated Trap

NA

NA User Session Terminated

User Session
Terminated

hzQtm Radio Synth


Lost Lock Trap

1.3.6.1.4.1.7262.2.4.21.38

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Synth Lost Lock

Radio Synth Lost


Lock

hzQtm Radio Synth


Lost Lock Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.39

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Synth Lost Lock


Cleared

Radio Synth Lost


Lock Cleared

hzQtm Radio Lost


Communication
Trap

1.3.6.1.4.1.7262.2.4.21.40

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Lost Communication Radio Lost


Communication

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-36

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Radio Lost


Communication
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.41

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Lost Communication Radio Lost


Cleared
Communication
Cleared

hzQtm Radio
Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.42

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Mismatch

Radio Mismatch

hzQtm Radio
Mismatch Cleared

1.3.6.1.4.1.7262.2.4.21.43

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Mismatch Cleared

Radio Mismatch
Cleared

hzQtm Radio Power 1.3.6.1.4.1.7262.2.4.21.44


Amp Trap

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Power Amp

Radio Power Amp

hzQtm Radio Power 1.3.6.1.4.1.7262.2.4.21.45


Amp Cleared Trap

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Power Amp Cleared

Radio Power Amp


Cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-37

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Radio
Excessive Tx
CableLoss Trap

1.3.6.1.4.1.7262.2.4.21.46

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Excessive Tx Cable


Loss

Radio Excessive Tx
Cable Loss

hzQtm Radio
Excessive Tx
CableLoss Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.47

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Excessive Tx Cable


Loss Cleared

Radio Excessive Tx
Cable Loss Cleared

hzQtm HiPower
Radio Tx Detector
Trap

1.3.6.1.4.1.7262.2.4.21.48

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

High Power Radio Tx


Detector

High Power Radio Tx


Detector

hzQtm HiPower
Radio Tx Detector
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.49

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

High Power Radio Tx


Detector Cleared

High Power Radio Tx


Detector Cleared

hzQtm Secondary
1.3.6.1.4.1.7262.2.4.21.50
Radio IsActive Trap

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Secondary Radio Is Active

Secondary Radio Is
Active

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-38

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Secondary
Radio IsActive
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.51

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Secondary Radio Is Active


Cleared

hzQtm Redundancy
SerialNumber
Mismatch Trap

1.3.6.1.4.1.7262.2.4.21.52

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Redundancy Serial Number Redundancy Serial


Mismatch
Number Mismatch

hzQtm Redundancy
SerialNumber
Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.53

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Redundancy Serial Number Redundancy Serial


Mismatch Cleared
Number Mismatch
Cleared

hzQtm Secondary
Radio NotDetected
Trap

1.3.6.1.4.1.7262.2.4.21.56

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Secondary Radio Not


Detected

Secondary Radio Not


Detected

hzQtm Secondary
Radio NotDetected
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.57

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Secondary Radio Not


Detected Cleared

Secondary Radio Not


Detected Cleared

Secondary Radio Is
Active Cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-39

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Primary
Radio NotDetected
Trap

1.3.6.1.4.1.7262.2.4.21.58

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Primary Radio Not


Detected

Primary Radio Not


Detected

hzQtm Primary
Radio NotDetected
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.59

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Primary Radio Not


Detected Cleared

Primary Radio Not


Detected Cleared

hzQtm Faulty
1.3.6.1.4.1.7262.2.4.21.60
Primary Radio Trap

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Primary Radio

Primary Radio

1.3.6.1.4.1.7262.2.4.21.61

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Primary Radio Cleared

Primary Radio
Cleared

hzQtm Excessive Rx 1.3.6.1.4.1.7262.2.4.21.64


CableLoss Trap

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Excessive Rx Cable Loss

Excessive Rx Cable
Loss

hzQtm Faulty
Primary Radio
Cleared Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-40

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Trap OID

Excessive Rx Cable Loss


Cleared

Short Description

hzQtm Excessive Rx 1.3.6.1.4.1.7262.2.4.21.65


CableLoss Cleared
Trap

1.3.6 2
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

hzQtm Redundancy
Secondary
PortIsActive Trap

1.3.6.1.4.1.7262.2.4.21.68

NA

NA Redundancy Secondary
Port Is Active

Redundancy
Secondary Port Is
Active

hzQtm Redundancy
Secondary
PortIsActive
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.69

NA

NA Redundancy Secondary
Port Is Active Cleared

Redundancy
Secondary Port Is
Active Cleared

hzQtm Redundancy
Primary PortFaulty
Trap

1.3.6.1.4.1.7262.2.4.21.70

NA

NA Redundancy Primary Port


Faulty

Redundancy Primary
Port Faulty

hzQtm Redundancy
Primary PortFaulty
Cleared Trap

1.3.6.1.4.1.7262.2.4.21.71

NA

NA Redundancy Primary Port


Faulty Cleared

Redundancy Primary
Port Faulty Cleared

hzQtm Redundancy
Secondary
PortFaulty Trap

1.3.6.1.4.1.7262.2.4.21.72

NA

NA Redundancy Secondary
Port Faulty

Redundancy
Secondary Port Faulty

hzQtm Redundancy
Secondary
PortFaulty Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.73

NA

NA Redundancy Secondary
Port Faulty Cleared

Redundancy
Secondary Port Faulty
Cleared

hzQtm Fan Failed


Trap

1.3.6.1.4.1.7262.2.4.21.74

NA

NA Fan Failed

Fan Failed

hzQtm Fan Failure


Cleared Trap

1.3.6.1.4.1.7262.2.4.21.75

NA

NA Fan Failed Cleared

Fan Failed Cleared

hzQtm Radio Unit


Hw Changed Trap

1.3.6.1.4.1.7262.2.4.21.78

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Unit Hw Changed

Excessive Rx Cable
Loss Cleared

Radio Unit Hw
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-41

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

Trap Name

Trap OID

hzQtm Radio Drain


Current Trap

1.3.6.1.4.1.7262.2.4.21.84

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Drain Current

Radio Drain Current

hzQtm Radio Drain


Current Cleared
Trap

1.3.6.1.4.1.7262.2.4.21.85

1.3.6 1
.1.4.
1.72
62.2.
4.7.4
.2.1.
1.1

Radio Drain Current


Cleared

Radio Drain Current


Cleared

Cold start trap

1.3.6.1.6.3.1.1.5.1

NA

NA DragonWave Cold Start

DragonWave Cold
Start

hzCp Link Down


Trap

1.3.6.1.4.1.7262.2.5.11.1

NA

NA DragonWave Link Down

DragonWave Link
Down

hzCp Link Up Trap

1.3.6.1.4.1.7262.2.5.11.2

NA

NA DragonWave Link Up

DragonWave Link Up

hzCp Radio Drain


Current Out Of
Limit Trap

1.3.6.1.4.1.7262.2.5.11.43

NA

NA Radio Drain Current

Radio Drain Current

hzCp Radio Drain


Current Out Of
Limit Cleared Trap

1.3.6.1.4.1.7262.2.5.11.44

NA

NA Radio Drain Current


Cleared

Radio Drain Current


Cleared

hzCp Radio Power


Amplifier Trap

1.3.6.1.4.1.7262.2.5.11.45

NA

NA Radio Power Amp

Radio Power Amp

hzCp Radio Power


Amplifier Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.46

NA

NA Radio Power Amp Cleared

Radio Power Amp


Cleared

hzCp Modem Rx
1.3.6.1.4.1.7262.2.5.11.31
Loss Of Signal Lock
Trap

NA

NA Modem Rx LOS Lock

Modem Rx LOS Lock

hzCp Modem Rx
1.3.6.1.4.1.7262.2.5.11.32
Loss Of Signal Lock
Cleared Trap

NA

NA Modem Rx LOS Lock


Cleared

Modem Rx LOS Lock


Cleared

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-42

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzCp Modem Snr


Below Threshold
Trap

1.3.6.1.4.1.7262.2.5.11.33

NA

NA Modem SNR Below


Threshold

Modem SNR Below


Threshold

hzCp Modem Snr


Below Threshold
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.34

NA

NA Modem SNR Below


Threshold Cleared

Modem SNR Below


Threshold Cleared

hzCp Modem
Equalizer Stress
Threshold Trap

1.3.6.1.4.1.7262.2.5.11.35

NA

NA Modem Equalizer Stress


Exceed Threshold

Modem Equalizer
Stress Exceed
Threshold

hzCp Modem
Equalizer Stress
Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.36

NA

NA Modem Equalizer Stress


Exceed Threshold Cleared

Modem Equalizer
Stress Exceed
Threshold Cleared

hzCp Rsl Below


Threshold Trap

1.3.6.1.4.1.7262.2.5.11.37

NA

NA Channelized RSL Below


Threshold

Channelized RSL
Below Threshold

hzCp Rsl Below


Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.38

NA

NA Channelized RSL Below


Threshold Cleared

Channelized RSL
Below Threshold
Cleared

hzCp No Sntp
Servers Reachable
Trap

1.3.6.1.4.1.7262.2.5.11.14

NA

NA SNTP Servers Unreachable SNTP Servers


Unreachable

hzCp No Sntp
Servers Reachable
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.15

NA

NA SNTP Servers Unreachable SNTP Servers


Cleared
Unreachable Cleared

hzCp User Session


Trap

1.3.6.1.4.1.7262.2.5.11.73

NA

NA User Session Commenced

User Session
Commenced

hzCp User Session


Cleared Trap

1.3.6.1.4.1.7262.2.5.11.74

NA

NA User Session Terminated

User Session
Terminated

hzCp Hitless Aam


Config MisMatch
Trap

1.3.6.1.4.1.7262.2.5.11.5

NA

NA HAAM Configuration
Mismatch

HAAM Configuration
Mismatch

hzCp Hitless Aam


Config MisMatch
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.6

NA

NA HAAM Configuration
Mismatch Cleared

HAAM Configuration
Mismatch Cleared

hzCp Hitless Aam


Modulation
Lowered Trap

1.3.6.1.4.1.7262.2.5.11.7

NA

NA HAAM On Lower
Modulation

HAAM On Lower
Modulation

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-43

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzCp Hitless Aam


Modulation
Lowered Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.8

NA

NA HAAM On Lower
Modulation Cleared

HAAM On Lower
Modulation Cleared

hzCp Atpc Config


Mismatch Trap

1.3.6.1.4.1.7262.2.5.11.10

NA

NA ATPC Config Mismatch

ATPC Config
Mismatch

hzCp Atpc Config


Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.11

NA

NA ATPC Config Mismatch


Cleared

ATPC Config
Mismatch Cleared

hzCp Bw Utilization 1.3.6.1.4.1.7262.2.5.11.21


Threshold Trap

NA

NA BW Utilization Threshold
Exceeded

BW Utilization
Threshold Exceeded

hzCp Bw Utilization 1.3.6.1.4.1.7262.2.5.11.22


Threshold Cleared
Trap

NA

NA BW Utilization Threshold
Exceeded Cleared

BW Utilization
Threshold Exceeded
Cleared

hzCp Aggregate
Dropped Frames
Threshold Trap

1.3.6.1.4.1.7262.2.5.11.17

NA

NA Aggregate Dropped Frames Aggregate Dropped


Threshold
Frames Threshold

hzCp Aggregate
Dropped Frames
Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.18

NA

NA Aggregate Dropped Frames Aggregate Dropped


Threshold Cleared
Frames Threshold
Cleared

hzCp Ethernet
1.3.6.1.4.1.7262.2.5.11.67
Speed Reduced Trap

NA

NA Ethernet Speed Reduced

Ethernet Speed
Reduced

hzCp Ethernet
Speed Reduced
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.68

NA

NA Ethernet Speed Reduced


Cleared

Ethernet Speed
Reduced Cleared

hzCp Temperature
Out Of Limit Trap

1.3.6.1.4.1.7262.2.5.11.47

NA

NA Radio Temperature Out Of


Limit

Radio Temperature
Out Of Limit

hzCp Temperature
Out Of Limit
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.48

NA

NA Radio Temperature Out Of


Limit Cleared

Radio Temperature
Out Of Limit Cleared

hzCp Queue
Dropped Frames
Threshold Trap

1.3.6.1.4.1.7262.2.5.11.19

NA

NA Ethernet Queue Dropped


Frames Threshold

Ethernet Queue
Dropped Frames
Threshold

hzCp Queue
Dropped Frames
Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.20

NA

NA Ethernet Queue Dropped


Frames Threshold Cleared

Ethernet Queue
Dropped Frames
Threshold Cleared

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-44

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

hzCp Redundancy
Partner Config
Mismatch Trap

1.3.6.1.4.1.7262.2.5.11.49

NA

NA Redundancy Partner Config Redundancy Partner


Mismatch
Config Mismatch

hzCp Redundancy
Partner Config
Mismatch Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.50

NA

NA Redundancy Partner Config Redundancy Partner


Mismatch Cleared
Config Mismatch
Cleared

hzCp Redundancy
Active On
Secondary Trap

1.3.6.1.4.1.7262.2.5.11.51

NA

NA Redundancy Active On
Secondary

Redundancy Active
On Secondary

hzCp Redundancy
Active On
Secondary Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.52

NA

NA Redundancy Active On
Secondary Cleared

Redundancy Active
On Secondary Cleared

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.53
Operating In Forced
Switch Trap

NA

NA Redundancy Operating In
Forced Switch

Redundancy
Operating In Forced
Switch

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.54
Operating In Forced
Switch Cleared Trap

NA

NA Redundancy Operating In
Forced Switch Cleared

Redundancy
Operating In Forced
Switch Cleared

hzCp Redundancy
Enet Cross Link
Trap

1.3.6.1.4.1.7262.2.5.11.55

NA

NA Redundancy Enet Cross


Link

Redundancy Enet
Cross Link

hzCp Redundancy
Enet Cross Link
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.56

NA

NA Redundancy Enet Cross


Link Cleared

Redundancy Enet
Cross Link Cleared

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.57
Active Using Partner
WLink Trap

NA

NA Redundancy Active Using


Partner WirelessLink

Redundancy Active
Using Partner
WirelessLink

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.58
Active Using Partner
Wlink Cleared Trap

NA

NA Redundancy Active Using


Partner WirelessLink
Cleared

Redundancy Active
Using Partner
WirelessLink Cleared

hzCp Redundancy
Standby Wlink In
Use Trap

1.3.6.1.4.1.7262.2.5.11.59

NA

NA Redundancy Standby
WirelessLink In Use

Redundancy Standby
WirelessLink In Use

hzCp Redundancy
Standby Wlink In
Use Cleared Trap

1.3.6.1.4.1.7262.2.5.11.60

NA

NA Redundancy Standby
WirelessLink In Use
Cleared

Redundancy Standby
WirelessLink In Use
Cleared

Short Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-45

Chapter 10

Traps

DragonWave Horizon Series V2 Traps

Table 10-9

DragonWave Horizon Series V2 Traps

Trap Name

Trap OID

Sub
typ
e
Subt Var
bin
ype
Varbi d
Val
nd
ue Description
OID

Short Description

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.61
Standby On Primary
Trap

NA

NA Redundancy Standby On
Primary

Redundancy Standby
On Primary

hzCp Redundancy
1.3.6.1.4.1.7262.2.5.11.62
Standby On Primary
Cleared Trap

NA

NA Redundancy Standby On
Primary Cleared

Redundancy Standby
On Primary Cleared

hzCpX2 Delivering
Half Capacity Trap

1.3.6.1.4.1.7262.2.5.11.63

NA

NA X2 Delivering Half
Capacity

X2 Delivering Half
Capacity

hzCpX2 Delivering
Half Capacity
Cleared Trap

1.3.6.1.4.1.7262.2.5.11.64

NA

NA X2 Delivering Half
Capacity Cleared

X2 Delivering Half
Capacity Cleared

1.3.6.1.4.1.7262.2.5.11.65
hzCp Bnc Cable
Signal Not Detected
Trap

NA

NA BNC Cable Signal Not


Detected

BNC Cable Signal Not


Detected

hzCp Bnc Cable


1.3.6.1.4.1.7262.2.5.11.66
Signal Not Detected
Cleared Trap

NA

NA BNC Cable Signal Not


Detected Cleared

BNC Cable Signal Not


Detected Cleared

hzCp Queue Depth


Threshold Trap

1.3.6.1.4.1.7262.2.5.11.23

NA

NA Queue Depth Threshold

Queue Depth
Threshold

hzCp Queue Depth


Threshold Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.24

NA

NA Queue Depth Threshold


Cleared

Queue Depth
Threshold Cleared

hzCp Hitless Aam


1.3.6.1.4.1.7262.2.5.11.9
Modulation
Changed Event Trap

NA

NA HAAM Modulation
Changed Event

HAAM Modulation
Changed Event

hzCp Atpc Auto


Disabled Trap

1.3.6.1.4.1.7262.2.5.11.12

NA

NA ATPC Auto Disabled

ATPC Auto Disabled

hzCp Atpc Auto


Disabled Cleared
Trap

1.3.6.1.4.1.7262.2.5.11.13

NA

NA ATPC Auto Disabled


Cleared

ATPC Auto Disabled


Cleared

*.Level of support for the trap is extended to the Association level with respect to the Trap name.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-46

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V1 Traps

Huawei S9300-Series V1 Traps


Table 10-10 lists the Huawei S9300-Series V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-37.
Table 10-10

Huawei S9300-Series V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

This type will


handle all traps
sent from SUN
server (the
OID is the
SUN SNMP
mib)

Subtype
Varbind
Value

Description

Short
Description

1.3.6.1.4.
1.42

Dummy ticket on sun servers

dummy ticket
trap

A warmStart trap signifies that the


SNMP entity,
supporting a notification originator
application,
is reinitializing itself such that its
configuration
is unaltered

huawei Warm
start trap

warmStart

1.3.6.1.6.
3.1.1.5

MIB2 V1 link
down

1.3.6.1.6.
3.1.1.5

N/A

N/A

huawei SNMP
A linkDown trap signifies that the
sending protocol entity recognizes a Link down
failure in one of the communication
links represented in the agent's
configuration. The Trap-PDU of
type linkDown contains as the first
element of its variable-bindings, the
name and value of the ifIndex
instance for the affected interface.

MIB2 V1 link
up

1.3.6.1.6.
3.1.1.5

N/A

N/A

huawei SNMP
A linkUp trap signifies that the
sending protocol entity recognizes Link up
that one of the communication links
represented in the agent's
configuration has come up. The
Trap-PDU of type linkUp contains
as the first element of its
variable-bindings, the name and
value of the ifIndex instance for the
affected interface.

coldStart

1.3.6.1.6.
3.1.1.5

N/A

N/A

A coldStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself and that its
configuration may have been
altered.

huawei Cold
start trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-47

Chapter 10

Traps

Huawei S9300-Series V1 Traps

Table 10-10

Huawei S9300-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

bgpBackward
Transition

1.3.6.1.2.
1.15.7

NA

NA

bgpEstablishe
d

1.3.6.1.2.
1.15.7

1.3.6.1.2. = 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

huawei BGP
established
trap

authentication
Failure

1.3.6.1.6.
3.1.1.5

NA

NA

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated. While
all implementations of SNMP
entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

huawei SNMP
authentication
failure

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

huawei OSPF
interface state
changed to
Down

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies huawei OSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.10.1
.6

huawei OSPF
An ospfNbrStateChange trap
neighbor state
signifies that there has been a
change in the state of a non-virtual down
OSPF neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

Description

Short
Description

The BGPBackwardTransition Event huawei BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-48

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V1 Traps

Table 10-10

Huawei S9300-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.10.1
.6

huawei OSPF
An ospfNbrStateChange trap
neighbor state
signifies that there has been a
change in the state of a non-virtual up
OSPF neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

ospfIfConfigE
rror

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on a
non-virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

huawei OSPF
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on a
non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

huawei OSPF
interface
authentication
failure

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfRxBadPacket trap
signifies that an OSPF packet has
been received on a non-virtual
interface that cannot be parsed.

huawei OSPF
bad packet
received

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

huawei OSPF
packet
retransmitted

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies huawei OSPF


that a new LSA has been originated new LSA
by this router. This trap should not originated
be invoked for simple refreshes of
LSAs (which happens every 30
minutes), but instead will only be
invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

huawei OSPF
LSA aged to
MaxAge

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-49

Chapter 10

Traps

Huawei S9300-Series V2 Traps

Huawei S9300-Series V2 Traps


Table 10-11 lists the Huawei S9300-Series V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-38.
Table 10-11

Huawei S9300-Series V2 Traps

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

bgpBackward
Transition

1.3.6.1.2.1.15.7.2

NA

bgpEstablishe
d

1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

huawei BGP
established
trap

entConfigCha
nge

1.3.6.1.2.1.47.2.0.1

NA

NA

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.

huawei Entity
table
configuration
changed

coldStart

1.3.6.1.6.3.1.1.5.1

NA

NA

A coldStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself and that its
configuration may have been
altered.

huawei Cold
start trap

warmStart

1.3.6.1.6.3.1.1.5.2

NA

NA

A warmStart trap signifies that the


SNMP entity,
supporting a notification originator
application,
is reinitializing itself such that its
configuration
is unaltered

huawei Warm
start trap

authentication
Failure

1.3.6.1.6.3.1.1.5.5

NA

NA

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated. While
all implementations of SNMP
entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

huawei SNMP
authentication
failure

NA

Description

Short
Description

The BGPBackwardTransition Event huawei BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-50

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V2 Traps

Table 10-11

Huawei S9300-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

linkDown

1.3.6.1.6.3.1.1.5.3

NA

NA

huawei SNMP
A linkDown trap signifies that the
Link down
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

NA

NA

huawei SNMP
A linkUp trap signifies that the
Link up
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

Description

Short
Description

huawei OSPF
interface state
changed to
Down

ospfIfStateCha 1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. = 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

ospfIfStateCha 1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. != 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies huawei OSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

ospfVirtIfState 1.3.6.1.2.1.14.16.2.1
Change

NA

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

NA

huawei OSPF
virtual
interface state
changed to
Down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-51

Chapter 10

Traps

Huawei S9300-Series V2 Traps

Table 10-11

Huawei S9300-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

ospfNbrStateC 1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. != 8
2.1.14.1
0.1.6

huawei OSPF
An ospfNbrStateChange trap
neighbor state
signifies that there has been a
change in the state of a non-virtual down
OSPF neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

ospfNbrStateC 1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. = 8
2.1.14.1
0.1.6

huawei OSPF
An ospfNbrStateChange trap
neighbor state
signifies that there has been a
change in the state of a non-virtual up
OSPF neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

ospfVirtNbrSt
ateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1. != 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to 1-Way
or Down) or progresses to a terminal
state (e.g., Full).

huawei OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

1.3.6.1.2.1.14.16.2.3

1.3.6.1. = 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to 1-Way
or Down) or progresses to a terminal
state (e.g., Full).

huawei OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on a
non-virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

huawei OSPF
interface
configuration
error

ospfVirtIfConf 1.3.6.1.2.1.14.16.2.5
igError

NA

NA

An ospfConfigError trap signifies


that a packet has been received on a
virtual interface from a router whose
configuration parameters conflict
with this router's configuration
parameters.

huawei OSPF
virtual
interface
configuration
error

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-52

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V2 Traps

Table 10-11

Trap Name

Huawei S9300-Series V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

ospfIfAuthFail 1.3.6.1.2.1.14.16.2.6
ure

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on a
non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

huawei OSPF
interface
authentication
failure

ospfVirtIfAuth 1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

An ospfVirtIfAuthFailure trap
signifies that a packet has been
received on a virtual interface from
a router whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

huawei OSPF
virtual
interface
authentication
failure

ospfIfRxBadP
acket

1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap
signifies that an OSPF packet has
been received on a non-virtual
interface that cannot be parsed.

huawei OSPF
bad packet
received

ospfVirtIfRxB
adPacket

1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

huawei OSPF
bad packet
received on
virtual
interface

ospfTxRetrans 1.3.6.1.2.1.14.16.2.10
mit

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

huawei OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

huawei OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies huawei OSPF


that a new LSA has been originated new LSA
by this router. This trap should not originated
be invoked for simple refreshes of
LSAs (which happens every 30
minutes), but instead will only be
invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

huawei OSPF
LSA aged to
MaxAge

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-53

Chapter 10

Traps

Huawei S9300-Series V2 Traps

Table 10-11

Huawei S9300-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description
huawei mpls
l3 vpn numvrf
routemax
thresh cleared
Trap

mplsL3VpnNu 1.3.6.1.2.1.10.166.11.0.6
mVrfRouteMa
xThreshCleare
d

NA

NA

This notification is generated only


after the number of routes contained
by the specified VRF exceeds or
attempts to exceed the maximum
allowed value as indicated by
mplsVrfMaxRouteThreshold, and
then falls below this value.

mplsL3VpnVr
fDown

1.3.6.1.2.1.10.166.11.0.2

NA

NA

This notification is generated when: huawei mpls


a. One interface is associated with l3 vpn vrf
Down Trap
this VRF, and the ifOperStatus of
this interface changes from up(1) to
down(2).
b. Multiple interfaces are associated
with this VRF, and the ifOperStatus
of all except one of these interfaces
is equal to up(1), and the
ifOperStatus of that interface
changes from up(1) to down(2).
c. The last interface with
ifOperStatus equal to up(1) is
disassociated from a VRF

mplsL3VpnVr
fNumVrfRout
eMaxThreshE
xceeded

1.3.6.1.2.1.10.166.11.0.4

NA

NA

This notification is generated when


the number of routes contained by
the specified VRF exceeds or
attempts to exceed the maximum
allowed value as indicated by
mplsL3VpnVrfMaxRouteThreshold
.

huawei mpls
l3 vpn vrf
numvrf
routemax
thresh
exceeded Trap

mplsL3VpnVr 1.3.6.1.2.1.10.166.11.0.3
fRouteMidThr
eshExceeded

NA

NA

This notification is generated when


the number of routes contained by
the specified VRF exceeds the value
indicated by
mplsL3VpnVrfMidRouteThreshold
.

huawei mpls
l3 vpn vrf
routemid
thresh
exceeded Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-54

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V2 Traps

Table 10-11

Huawei S9300-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

mplsL3VpnVr
fUp

1.3.6.1.2.1.10.166.11.0.1

NA

NA

This notification is generated when: huawei mpls


l3 vpn vrf Up
a. No interface is associated with
Trap
this VRF, and the first (and only
first) interface associated with it has
its ifOperStatus change to up(1).
b. One interface is associated with
this VRF, and the ifOperStatus of
this interface changes to up(1).
c. Multiple interfaces are associated
with this VRF, and the ifOperStatus
of all interfaces is down(2), and the
first of those interfaces has its
ifOperStatus change to up(1).

mplsTunnelRe 1.3.6.1.2.1.10.166.3.0.3
routed

NA

NA

generated when a tunnel is rerouted.


If the mplsTunnelARHopTable is
used, then this tunnel instance's
entry in the
mplsTunnelARHopTable MAY
contain the new path for this tunnel
some time after this trap is issued by
the agent

huawei
MPLS-TE
tunnel
rerouted trap

mplsTunnelRe 1.3.6.1.2.1.10.166.3.0.4
optimized

NA

NA

generated when a tunnel is


reoptimized. If the
mplsTunnelARHopTable is used,
then this tunnel instance's entry in
the mplsTunnelARHopTable MAY
contain the new path for this tunnel
some time after this trap is issued by
the agent

huawei
MPLS-TE
tunnel
reoptimized
trap

mplsTunnelDo 1.3.6.1.2.1.10.166.3.0.2
wn

NA

NA

huawei
generated when a
MPLS-TE
mplsTunnelOperStatus object for
tunnel down
one of the configured tunnels is
about to enter the down state from
some other state (but not from the
notPresent state). This other state is
indicated by the included value of
mplsTunnelOperStatus

mplsTunnelUp 1.3.6.1.2.1.10.166.3.0.1

NA

NA

huawei
generated when a
MPLS-TE
mplsTunnelOperStatus object for
tunnel up
one of the configured tunnels is
about to leave the down state and
transition into some other state (but
not into the notPresent state). This
other state is indicated by the
included value of
mplsTunnelOperStatus

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-55

Chapter 10

Traps

Huawei CX600/ATN Series V1 Traps

Huawei CX600/ATN Series V1 Traps


Huawei CX600/ATN Series V1 traps supported in Cisco ANA is the same as the Huawei S9300-Series
V1 traps. For more details on the Huawei S9300-Series V1 traps see Table 10-10.

Huawei CX600/ATN Series V2 Traps


Huawei CX600/ATN Series V2 traps supported in Cisco ANA is the same as the Huawei S9300-Series
V2 traps. For more details on the Huawei S9300-Series V2 traps see Table 10-11

Juniper E-Series V1 Traps


Table 10-12 lists the Juniper E-Series V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-39.
Table 10-12

Juniper E-Series V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
Juniper BGP
established
trap

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 1
1.15.3.1.
2

The BGPBackwardTransition Event Juniper BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-56

OL-24429-01

Chapter 10

Traps
Juniper E-Series V2 Traps

Juniper E-Series V2 Traps


Table 10-13 lists the Juniper M-Series V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-40.
Table 10-13

Juniper E-Series V2 Traps

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

frDLCIStatus
Change

1.3.6.1.2.1.10.32.0.1

Juniper FR
1.3.6.1.2 This trap indicates that the indicated
.1.10.32. Virtual Circuit has changed state. It has DLCI status
2.1.3
either been created or invalidated, or has change trap
toggled between the active and inactive
states. If, however, the reason for the state
change is due to the DLCMI going down,
per-DLCI traps should not be generated.

frDLCIStatus
Change

1.3.6.1.2.1.10.32.0.1

Juniper FR
1.3.6.1.2 This trap indicates that the indicated
.1.10.32. Virtual Circuit has changed state. It has DLCI status
2.1.3
either been created or invalidated, or has up trap
toggled between the active and inactive
states. If, however, the reason for the state
change is due to the DLCMI going down,
per-DLCI traps should not be generated.

Description

Short
Description

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to
Down

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to Up

ospfVirtIfState .1.3.6.1.2.1.14.16.2.1
Change

NA

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual interface. This trap should
be generated when the inter-face state
regresses (e.g., goes from Point-to-Point
to Down) or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
interface state
changed to
Down

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-57

Chapter 10

Traps

Juniper E-Series V2 Traps

Table 10-13

Juniper E-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1.2. != 8
1.14.10.1
.6

Juniper OSPF
An ospfNbrStateChange trap signifies
that there has been a change in the state of neighbor state
down
a non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full).

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. != 8
1.14.11.1
.5

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. = 8
1.14.11.1
.5

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a


packet has been received on a non-virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf .1.3.6.1.2.1.14.16.2.5
igError

NA

NA

An ospfConfigError trap signifies that a


packet has been received on a virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail .1.3.6.1.2.1.14.16.2.6
ure

NA

NA

An ospfIfAuthFailure trap signifies that a


packet has been received on a non-virtual
interface from a router whose
authentication key or authentication type
conflicts with this router's authentication
key or authentication type.

Juniper OSPF
interface
authentication
failure

ospfVirtIfAuth .1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

An ospfVirtIfAuthFailure trap signifies


that a packet has been received on a
virtual interface from a router whose
authentication key or authentication type
conflicts with this router's authentication
key or authentication type.

Juniper OSPF
virtual
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-58

OL-24429-01

Chapter 10

Traps
Juniper E-Series V2 Traps

Table 10-13

Juniper E-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

ospfIfRxBadP
acket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that Juniper OSPF


bad packet
an OSPF packet has been received on a
received
non-virtual interface that cannot be
parsed.

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that


an OSPF packet has been received on a
virtual interface that cannot be parsed.

Juniper OSPF
bad packet
received on
virtual
interface

ospfVirtIfTxR
etransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than


an OSPF packet has been retransmitted
on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

newRoot

1.3.6.1.2.1.17.0.1

Juniper new
The newRoot trap indicates that the
sending agent has become the new root of root trap
the Spanning Tree; the trap is sent by a
bridge soon after its election as the new
root, e.g., upon expiration of the
Topology Change Timer, immediately
subsequent to its election.
Implementation of this trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.0.2

A topologyChange trap is sent by a


bridge when any of its configured ports
transitions from the Learning state to the
Forwarding state, or from the Forwarding
state to the Blocking state. The trap is not
sent if a newRoot trap is sent for the same
transition. Implementation of this trap is
optional.

coldStart

1.3.6.1.6.3.1.1.5.1

A coldStart trap signifies that the SNMP Juniper Cold


start trap
entity, supporting a notification
originator application, is reinitializing
itself and that its configuration may have
been altered.

authentication
Failure

1.3.6.1.6.3.1.1.5.5

Juniper SNMP
An authenticationFailure trap signifies
authentication
that the SNMP entity has received a
failure
protocol message that is not properly
authenticated. While all implementations
of SNMP entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Description

Short
Description

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-59

Chapter 10

Traps

Juniper E-Series V2 Traps

Table 10-13

Juniper E-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

ospfMaxAgeL
sa

1.3.6.1.2.1.14.16.2.13

NA

ospfTxRetrans 1.3.6.1.2.1.14.16.2.10
mit
ospfOriginate
Lsa

Subtype
Varbind
Value

Description

Short
Description

NA

An ospfMaxAgeLsa trap signifies that


one of the LSA in the router's link-state
database has aged to MaxAge.

Juniper OSPF
LSA aged to
MaxAge

NA

NA

An ospfTxRetransmit trap signifies than


an OSPF packet has been retransmitted
on a non-virtual interface.

Juniper OSPF
packet
retransmitted

1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a Juniper OSPF


new LSA
new LSA has been originated by this
originated
router. This trap should not be invoked
for simple refreshes of LSAs (which
happens every 30 minutes), but instead
will only be invoked when an LSA is
(re)originated due to a topology change.

entConfigCha
nge

1.3.6.1.2.1.47.2.0.1

NA

NA

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can be
utilized by an NMS to trigger
logical/physical entity table maintenance
polls.

Juniper Entity
table
configuration
changed

ospfLsdbAppr
oachingOverfl
ow

1.3.6.1.2.1.14.16.2.15

NA

NA

ospf lsdb approaching overflow trap

Juniper OSPF
lsdb
approaching
overflow trap

ospfLsdbOverf 1.3.6.1.2.1.14.16.2.14
low

NA

NA

ospf lsdb overflow trap

Juniper OSPF
lsdb overflow
trap

warmStart

NA

NA

A warmStart trap signifies that the SNMP Juniper Warm


start trap
entity,
supporting a notification originator
application,
is reinitializing itself such that its
configuration
is unaltered

1.3.6.1.6.3.1.1.5.2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-60

OL-24429-01

Chapter 10

Traps
Juniper E-Series V2 Traps

Table 10-13

Juniper E-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

linkDown

1.3.6.1.6.3.1.1.5.3

NA

NA

A linkDown trap signifies that the SNMP Juniper SNMP


Link down
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links is about to
enter the down state from some other
state (but not from the notPresent state).
This other state is indicated by the
included value of ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

NA

NA

Juniper SNMP
A linkUp trap signifies that the SNMP
Link up
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links left the
down state and transitioned into some
other state (but not into the notPresent
state). This other state is indicated by the
included value of ifOperStatus.

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-61

Chapter 10

Traps

Juniper M-Series V1 Traps

Juniper M-Series V1 Traps


Table 10-14 lists the Juniper M-Series V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-41.
Table 10-14

Juniper M-Series V1 Traps

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
OID
Type
Type
OID

Subty
pe
Varbin
d
Value Description

Short
Description

frDLCIStatus
Change

1.3.6.1.2.
1.10.32.0

1.3.6.1. 3
2.1.10.
32.2.1.
3

Juniper FR
This trap indicates that the indicated
Virtual Circuit has changed state. It has DLCI status
change trap
either been created or invalidated, or
has toggled between the active and
inactive states. If, however, the reason
for the state change is due to the
DLCMI going down, per-DLCI traps
should not be generated.

frDLCIStatus
Change

1.3.6.1.2.
1.10.32.0

1.3.6.1. 2
2.1.10.
32.2.1.
3

Juniper FR
This trap indicates that the indicated
Virtual Circuit has changed state. It has DLCI status
up trap
either been created or invalidated, or
has toggled between the active and
inactive states. If, however, the reason
for the state change is due to the
DLCMI going down, per-DLCI traps
should not be generated.

ospfVirtIfState 6
Change

1.3.6.1.2.
1.14.16.2

NA

An ospfIfStateChange trap signifies


that there has been a change in the state
of an OSPF virtual interface. This trap
should be generated when the
inter-face state regresses (e.g., goes
from Point-to-Point to Down) or
progresses to a terminal state (i.e.,
Point-to-Point).

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1. != 8
2.1.14.
10.1.6

NA

Juniper OSPF
virtual
interface state
changed to
Down

An ospfNbrStateChange trap signifies Juniper OSPF


that there has been a change in the state neighbor state
of a non-virtual OSPF neighbor. This down
trap should be generated when the
neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or
Down) or progresses to a terminal state
(e.g., 2-Way or Full).

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-62

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

1.3.6.1. = 8
2.1.14.
10.1.6

An ospfNbrStateChange trap signifies Juniper OSPF


that there has been a change in the state neighbor state
of a non-virtual OSPF neighbor. This up
trap should be generated when the
neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or
Down) or progresses to a terminal state
(e.g., 2-Way or Full).

1.3.6.1.2.
1.14.16.2

1.3.6.1. != 8
2.1.14.
11.1.5

An ospfIfStateChange trap signifies


that there has been a change in the state
of an OSPF virtual neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
Full).

Juniper OSPF
virtual
neighbor state
down

1.3.6.1.2.
1.14.16.2

1.3.6.1. = 8
2.1.14.
11.1.5

An ospfIfStateChange trap signifies


that there has been a change in the state
of an OSPF virtual neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
Full).

Juniper OSPF
virtual
neighbor state
up

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on a
non-virtual interface from a router
whose configuration parameters
conflict with this router's configuration
parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf 6
igError

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfConfigError trap signifies that


a packet has been received on a virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on a
non-virtual interface from a router
whose authentication key or
authentication type conflicts with this
router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

ospfNbrStateC 6
hange

ospfVirtNbrSt
ateChange

ospfVirtNbrSt
ateChange

ospfIfConfigE
rror

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-63

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description
Juniper OSPF
virtual
interface
authentication
failure

ospfVirtIfAuth 6
Failure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap signifies


that a packet has been received on a
virtual interface from a router whose
authentication key or authentication
type conflicts with this router's
authentication key or authentication
type.

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

Juniper OSPF
An ospfIfRxBadPacket trap signifies
that an OSPF packet has been received bad packet
received
on a non-virtual interface that cannot
be parsed.

ospfVirtIfRxB
adPacket

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies that Juniper OSPF


an OSPF packet has been received on a bad packet
virtual interface that cannot be parsed. received on
virtual
interface

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

11

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies that Juniper OSPF


a new LSA has been originated by this new LSA
router. This trap should not be invoked originated
for simple refreshes of LSAs (which
happens every 30 minutes), but instead
will only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies that Juniper OSPF


one of the LSA in the router's link-state LSA aged to
database has aged to MaxAge.
MaxAge

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-64

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description
Juniper OSPF
interface state
changed to
Down

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1. = 1
2.1.14.
7.1.12

An ospfIfStateChange trap signifies


that there has been a change in the state
of a non-virtualOSPF interface. This
trap should be generated when the
interface state regresses (e.g., goes
from Dr to Down) or progresses to a
terminal state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1. != 1
2.1.14.
7.1.12

Juniper OSPF
An ospfIfStateChange trap signifies
that there has been a change in the state interface state
changed to Up
of a non-virtualOSPF interface. This
trap should be generated when the
interface state regresses (e.g., goes
from Dr to Down) or progresses to a
terminal state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1. 6
2.1.15.
3.1.2

The BGP Established event is


generated when the BGP FSM enters
the ESTABLISHED state.

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1. 1
2.1.15.
3.1.2

The BGPBackwardTransition Event is Juniper BGP


generated when the BGP FSM moves down trap
from a higher numbered state to a lower
numbered state.

newRoot

1.3.6.1.2.
1.17.0

Juniper new
The newRoot trap indicates that the
sending agent has become the new root root trap
of the Spanning Tree; the trap is sent by
a bridge soon after its election as the
new root, e.g., upon expiration of the
Topology Change Timer, immediately
subsequent to its election.
Implementation of this trap is optional.

topologyChan
ge

1.3.6.1.2.
1.17.0

A topologyChange trap is sent by a


bridge when any of its configured ports
transitions from the Learning state to
the Forwarding state, or from the
Forwarding state to the Blocking state.
The trap is not sent if a newRoot trap is
sent for the same transition.
Implementation of this trap is optional.

Juniper BGP
established
trap

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-65

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description
Juniper Entity
table
configuration
changed

entConfigCha
nge

1.3.6.1.2.
1.47.2.0

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can be
utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more than
one entConfigChange
'notification-event' in a given time
interval (five seconds is the suggested
default). A 'notification-event' is the
transmission of a single trap or inform
PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period, then
notification-events for these changes
should be suppressed by the agent until
the current throttling period expires. At
the end of a throttling period, one
notification-event should be generated
if any configuration changes occurred
since the start of the throttling period.
In such a case, another throttling period
is started right away.
An NMS should periodically check the
value of entLastChangeTime to detect
any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

mplsLspUp

1.3.6.1.4.
1.2636.3.2
.4

mplsLspUp trap signifies that the


juniper mpls
specified LSP is up. The current active Lsp Up trap
path for the LSP is mplsPathName.

mplsLspDown 6

1.3.6.1.4.
1.2636.3.2
.4

mplsLspDown trap signifies that the


specified LSP is down, because the
current active path mplsPathName
went down.

mplsLspChang 6
e

1.3.6.1.4.
1.2636.3.2
.4

mplsLspChange trap signifies that the juniper mpls


Lsp Change
specified LSP has switched traffic to
trap
the new active path 'toLspPath'. The
LSP maintains up state before and after
the switch over

juniper mpls
Lsp Down trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-66

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

mplsLspPathD 6
own

1.3.6.1.4.
1.2636.3.2
.4

mplsLspPathDown trap signifies that


the specified path mplsPathName for
the specified LSP mplsLspName went
down

juniper mpls
lsp path down
trap

mplsLspPathU 6
p

1.3.6.1.4.
1.2636.3.2
.4

mplsLspPathUp trap signifies that the


specified path mplsPathName for the
specified LSP mplsLspName came up

juniper mpls
lsp path up
trap

apsEventSwitc 6
hover

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventSwitchover notification is
juniper aps
sent when the value of an instance of
event switch
apsChanStatusSwitchovers increments. over trap

apsEventMode 6
Mismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventModeMismatch notification is juniper aps


event mode
sent when the value of an instance of
mismatch trap
apsStatusModeMismatches
increments.

apsEventChan
nelMismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
apsEventChannelMismatch
notification is sent when the value of an event channel
mismatch trap
instance of
apsStatusChannelMismatches
increments.

apsEventPSBF 6

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventPSBF notification is sent


when the value of an instance of
apsStatusPSBFs increments.

juniper aps
event psbf trap

apsEventFEPL 6
F

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventFEPLFs notification is sent


when the value of an instance of
apsStatusFEPLFs increments.

juniper aps
event feplf
trap

jnxVpnIfUp

1.3.6.1.4.
1.2636.3.2
6.0

Juniper VPN
jnxVpnIfUp notification is generated
Interface Up
when the interface with index
jnxVpnIfIndex belonging to the VPN
named jnxVpnIfVpnName of type
jnxVpnIfVpnType transitions out of the
'down' state.

jnxVpnIfDown 6

1.3.6.1.4.
1.2636.3.2
6.0

jnxVpnIfDown notification is
generated when the interface with
index jnxVpnIfIndex belonging to the
VPN named jnxVpnIfVpnName of
type jnxVpnIfVpnType transitions to
the 'down' state.

Juniper VPN
Interface
Down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-67

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxVpnPwUp

1.3.6.1.4.
1.2636.3.2
6.0

jnxVpnPwUp notification is generated juniper vpn


power up trap
when the Pseudo-Wire with index
jnxVpnPwIndex belonging to the VPN
named jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out of
the 'down' state.

jnxVpnPwDo
wn

1.3.6.1.4.
1.2636.3.2
6.0

juniper vpn
jnxVpnPwDown notification is
generated when the Pseudo-Wire with power down
index jnxVpnPwIndex belonging to the trap
VPN named VpnPwVpnName of type
jnxVpnPwVpnType transitions to the
'down' state.

jnxPowerSupp 6
lyFailure

1.3.6.1.4.
1.2636.4.1

jnxFruPowerOff trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
powered off in the chassis.

juniper power
supply failure
Trap

jnxFanFailure

1.3.6.1.4.
1.2636.4.1

jnxFanFailure trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified cooling
fan or impeller in the chassis has been
in the failure (not spinning) condition.

juniper fan
failure Trap

jnxOverTempe 6
rature

1.3.6.1.4.
1.2636.4.1

jnxOverTemperature trap signifies that juniper over


temperature
the SNMP entity, acting in an agent
Trap
role, has detected that the specified
hardware component in the chassis has
experienced over temperature
condition.

jnxRedundanc
ySwitchover

1.3.6.1.4.
1.2636.4.1

jnxRedundancySwitchover trap
signifies that the SNMP entity, acting
in an agent role, has detected that the
specified hardware component in the
chassis has experienced a redundancy
switchover event defined as a change in
state of jnxRedundancyState from
master to backup or vice versa.

juniper
redundancy
switch over
Trap

jnxFruRemova 6
l

1.3.6.1.4.
1.2636.4.1

jnxFruRemoval trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
removed from the chassis.

Card Out trap

Subty
pe
Varbin
d
Value Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-68

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxFruRemova 6
l

1.3.6.1.4.
1.2636.4.1

A jnxFruRemoval trap signifies that the juniper fru


removal Trap
SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
removed from the chassis.

jnxFruInsertio
n

1.3.6.1.4.
1.2636.4.1

jnxFruInsertion trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
inserted into the chassis.

jnxFruInsertio
n

1.3.6.1.4.
1.2636.4.1

A jnxFruInsertion trap signifies that the juniper fru


insertion Trap
SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
inserted into the chassis.

jnxFruPowerO 6
ff

1.3.6.1.4.
1.2636.4.1

jnxFruPowerOff trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
powered off in the chassis.

Card Down
Trap

jnxFruPowerO 6
n

1.3.6.1.4.
1.2636.4.1

jnxFruPowerOn trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has been
powered on in the chassis.

Card Up Trap

jnxFruFailed

1.3.6.1.4.
1.2636.4.1

This indicates the specified FRU (Field juniper fru


failed Trap
Replaceable Unit) has failed in the
chassis. Most probably this is due toi
some hard error such as fru is not
powering up or not able to load ukernel.
In these cases, fru is replaced.

jnxFruOffline

10

1.3.6.1.4.
1.2636.4.1

jnxFruOffline trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit)

juniper fru
offline Trap

jnxFruOnline

11

1.3.6.1.4.
1.2636.4.1

jnxFruOnline trap signifies that the


SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has gone
online in the chassis.

juniper fru
online Trap

Card In trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-69

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxFruCheck

12

1.3.6.1.4.
1.2636.4.1

juniper fru
jnxFruCheck trap signifies that the
check Trap
SNMP entity, acting in an agent role,
has detected that the specified FRU
(Field Replaceable Unit) has
encountered some operational errors
and gone into check state in the chassis.

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.
1.2636.4.1
0.0

juniper Sp svc
This indicates a Service PIC has
set zone
entered a more severe memory-usage
zone from a less severe memory usage entered trap
zone. The zone entered is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetZ
oneExited

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has exited juniper Sp svc


a more severe memory-usage zone to a set zone exited
trap
less severe memory usage zone. The
zone exited is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetC
puExceeded

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


juniper Sp svc
exceeded its internal threshold for CPU set cpu
exceeded trap
utilization (85%).

jnxSpSvcSetC
puOk

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


juniper Sp svc
exceeded its internal threshold for CPU set cpu ok trap
utilization (85%).

jnxDfcSoftPps 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in


packet per second) going beyond the
configured limit.

juniper dfc
soft pps
threshold
exceeded trap

jnxDfcSoftPps 6
UnderThreshol
d

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in


packet per second) dropping back to
below the configured limit.

juniper dfc
soft pps under
threshold trap

jnxDfcHardPp 6
sThresholdExc
eeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in


packet per second) going beyond the
recommended limit.

juniper dfc
hard pps
threshold
exceeded trap

jnxDfcHardPp 6
sUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in


packet per second) dropping back to
below the recommended limit.

juniper dfc
hard pps under
threshold trap

jnxDfcSoftMe 6
mThresholdEx
ceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


condition i.e memory usage is going
beyond the configured limit.

juniper dfc
soft mem
threshold
exceeded trap

Subty
pe
Varbin
d
Value Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-70

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxDfcSoftMe 6
mUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage dropping juniper dfc


back to below the configured limit.
soft mem
under
threshold trap

jnxDfcHardM 6
emThresholdE
xceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


condition i.e memory usage is going
beyond the recommended limit.

jnxDfcHardM 6
emUnderThres
hold

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage dropping juniper dfc


back to below the recommended limit. hard mem
under
threshold trap

jnxPowerSupp 6
lyOK

1.3.6.1.4.
1.2636.4.2

jnxPowerSupplyOK trap signifies that


the SNMP entity, acting in an agent
role, has detected that the specified
power supply in the chassis has
recovered from the failure (bad DC
output) condition.

jnxFanOK

1.3.6.1.4.
1.2636.4.2

jnxFanOK trap signifies that the SNMP juniper fan ok


trap
entity, acting in an agent role, has
detected that the specified cooling fan
or impeller in the chassis has recovered
from the failure (not spinning)
condition.

jnxTemperatur 6
eOK

1.3.6.1.4.
1.2636.4.2

jnxTemperatureOK trap signifies that juniper


temperature
the SNMP entity, acting in an agent
ok trap
role, has detected that the specified
hardware component in the chassis has
recovered from over temperature
condition.

jnxRmonAlar
mGetFailure

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated when juniper Rmon


alarm get
the get request for an alarm variable
failure trap
returns an error. The specific error is
identified by
jnxRmonAlarmGetFailReason.

jnxRmonGetO 6
k

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated when juniper Rmon


the get request for an alarm variable is get ok trap
successful. This is only sent after
previous attempts were unsuccessful.

jnxLdpLspUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated when juniper Ldp


an LSP comes up.
Lsp Up trap

juniper dfc
hard mem
threshold
exceeded trap

juniper power
supply ok trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-71

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxLdpLspDo
wn

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated when juniper Ldp


the LSP goes down.
Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated when juniper ldp


the value of 'mplsLdpSesState' enters session up trap
the 'operational(5) state.

jnxLdpSesDo
wn

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated when juniper ldp


the value of 'mplsLdpSesState' leaves session down
the 'operational(5) state. The value of trap
jnxLdpSesDownIf is one of the
neighbor's interface. It is the interface
associated with the last neighbor when
jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.
1.2636.4.5
.0

Notification of a configuration
management event as recorded in
jnxCmCfgChgEventTable.

juniper Cm
cfg change
trap

jnxCmRescue
Change

1.3.6.1.4.
1.2636.4.5
.0

Notification of the latest rescue


configuration change.

juniper Cm
rescue change
trap

jnxSonetAlar
mSet

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently set sonet/sdh juniper sonet


alarm.
alarm set trap

jnxSonetAlar
mCleared

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently cleared


sonet/sdh alarm.

juniper sonet
alarm cleared
trap

jnxPMonOverl 6
oadSet

1.3.6.1.4.
1.2636.4.7
.0

Notification of a new overload


condition on a Passive Monitoring
interface.

juniper PMon
overload set
trap

jnxPMonOverl 6
oadCleared

1.3.6.1.4.
1.2636.4.7
.0

Notification of a cleared overload


condition on a Passive Monitoring
interface.

juniper PMon
overload
cleared trap

jnxCollUnavai 6
lableDest

1.3.6.1.4.
1.2636.4.8
.0

Notification of an unavailable
destination failure encountered while
transferring a collector file.

juniper coll
unavailable
dest trap

jnxCollUnavai 6
lableDestClear
ed

1.3.6.1.4.
1.2636.4.8
.0

This indicates a previous unavailable


destination failure has been resolved.

juniper coll
unavailable
dest cleared
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-72

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxCollUnsucc 6
essfulTransfer

1.3.6.1.4.
1.2636.4.8
.0

This indicates an error was encountered juniper coll


while attempting a file transfer.
unsuccessful
transfer trap

jnxCollFlowO
verload

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


juniper coll
overload condition has been triggered. flow overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


overload condition has been cleared.

juniper coll
flow overload
cleared trap

jnxCollMemor 6
yUnavailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable


condition has been triggered.

juniper coll
memory
unavailable
trap

jnxCollMemor 6
yAvailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable


condition has been cleared.

juniper coll
memory
available trap

jnxCollFtpSwi 6
tchover

1.3.6.1.4.
1.2636.4.8
.0

This indicates an FTP server


switchover has occurred.

juniper coll ftp


switch over
trap

jnxPingRttThr 6
esholdExceede
d

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the juniper ping


rtt threshold
round trip time
(jnxPingCtlRttThreshold) exceeds the exceeded trap
configured threshold
(jnxPingCtlRttThreshold) and the
rttThreshold bit is set in
jnxPingCtlTrapGeneration.

jnxPingRttStd
DevThreshold
Exceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


standard deviation of the round trip
time (jnxPingResultsStdDevRttUs)
exceeds the configured threshold
(jnxPingCtlRttStdDevThreshold) and
the rttStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded trap

jnxPingRttJitte 6
rThresholdExc
eeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


round trip time jitter
(jnxPingResultsMaxRttUs minus
jnxPingResultsMinRttUs) exceeds the
configured threshold
(jnxPingCtlRttJitterThreshold) and the
rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-73

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxPingEgress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


egress time (jnxPingResultsEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressTimeThreshold) and
the egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded trap

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


standard deviation of the egress time
(jnxPingResultsStddevEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressStdDevThreshold)
and the egressStdDevThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
egress std dev
threshold
exceeded trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


egress time jitter
(jnxPingResultsMaxEgressUs minus
jnxPingResultsMinEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressJitterThreshold) and
the egressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded trap

jnxPingIngress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


ingress time
(jnxPingResultsIngressUs) exceeds the
configured threshold
(jnxPingCtlIngressTimeThreshold)
and the ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded trap

jnxPingIngress 6
StddevThresho
ldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


standard deviation of the ingress time
(jnxPingResultsStddevIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressStddevThreshold)
and the ingressStdDevThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
ingress std dev
threshold
exceeded trap

jnxPingIngress 6
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when the


ingress time jitter
(jnxPingResultsMaxIngressUs minus
jnxPingResultsMinIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressJitterThreshold) and
the ingressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-74

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subty
pe
Varbin
d
Value Description

Short
Description

jnxBgpM2Esta 6
blished

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGP Established event is


generated when the BGP FSM enters
the ESTABLISHED state.

juniper bgp
M2
established
trap

jnxBgpM2Bac 6
kwardTransitio
n

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGPBackwardTransition Event is juniper bgp


generated when the BGP FSM moves M2 backward
from a higher numbered state to a lower transition trap
numbered state.

coldStart

1.3.6.1.6.
3.1.1.5

Juniper Cold
A coldStart trap signifies that the
SNMP entity, supporting a notification start trap
originator application, is reinitializing
itself and that its configuration may
have been altered.

warmStart

1.3.6.1.6.
3.1.1.5

Juniper Warm
A warmStart trap signifies that the
SNMP entity, supporting a notification start trap
originator application, is reinitializing
itself such that its configuration is
unaltered.

linkDown

1.3.6.1.6.
3.1.1.5

Juniper Line
A linkDown trap signifies that the
down trap
SNMP entity, acting in an agent role,
has detected that the ifOperStatus
object for one of its communication
links is about to enter the down state
from some other state (but not from the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-75

Chapter 10

Traps

Juniper M-Series V1 Traps

Table 10-14

Juniper M-Series V1 Traps (Continued)

Trap Name

Subtyp
e
Generic Specific Enterprise Varbind
Type
Type
OID
OID

linkUp

1.3.6.1.6.
3.1.1.5

A linkUp trap signifies that the SNMP Juniper Line


up trap
entity, acting in an agent role, has
detected that the ifOperStatus object
for one of its communication links left
the down state and transitioned into
some other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

authentication
Failure

1.3.6.1.6.
3.1.1.5

An authenticationFailure trap signifies Juniper SNMP


authentication
that the SNMP entity has received a
failure
protocol message that is not properly
authenticated. While all
implementations of SNMP entities
MAY be capable of generating this
trap, the snmpEnableAuthenTraps
object indicates whether this trap will
be generated.

Subty
pe
Varbin
d
Value Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-76

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Juniper M-Series V2 Traps


Table 10-15 lists the Juniper M-Series V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-42.
Table 10-15

Juniper M-Series V2 Traps

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

frDLCIStatus
Change

1.3.6.1.2.1.10.32.0.1

Juniper FR
1.3.6.1.2 This trap indicates that the indicated
.1.10.32. Virtual Circuit has changed state. It has DLCI status
2.1.3
either been created or invalidated, or has change trap
toggled between the active and inactive
states. If, however, the reason for the state
change is due to the DLCMI going down,
per-DLCI traps should not be generated.

frDLCIStatus
Change

1.3.6.1.2.1.10.32.0.1

Juniper FR
1.3.6.1.2 This trap indicates that the indicated
.1.10.32. Virtual Circuit has changed state. It has DLCI status
2.1.3
either been created or invalidated, or has up trap
toggled between the active and inactive
states. If, however, the reason for the state
change is due to the DLCMI going down,
per-DLCI traps should not be generated.

Description

Short
Description

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to
Down

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to Up

ospfVirtIfState .1.3.6.1.2.1.14.16.2.1
Change

NA

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual interface. This trap should
be generated when the inter-face state
regresses (e.g., goes from Point-to-Point
to Down) or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
neighbor state
down

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-77

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1.2. != 8
1.14.10.1
.6

Juniper OSPF
An ospfNbrStateChange trap signifies
that there has been a change in the state of neighbor state
down
a non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full).

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1.2. = 8
1.14.10.1
.6

Juniper OSPF
An ospfNbrStateChange trap signifies
that there has been a change in the state of neighbor state
up
a non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full).

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. != 8
1.14.11.1
.5

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. = 8
1.14.11.1
.5

An ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies that a


packet has been received on a non-virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf .1.3.6.1.2.1.14.16.2.5
igError

NA

NA

An ospfConfigError trap signifies that a


packet has been received on a virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail .1.3.6.1.2.1.14.16.2.6
ure

NA

NA

An ospfIfAuthFailure trap signifies that a


packet has been received on a non-virtual
interface from a router whose
authentication key or authentication type
conflicts with this router's authentication
key or authentication type.

Juniper OSPF
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-78

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

ospfVirtIfAuth .1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

An ospfVirtIfAuthFailure trap signifies


that a packet has been received on a
virtual interface from a router whose
authentication key or authentication type
conflicts with this router's authentication
key or authentication type.

ospfIfRxBadP
acket

.1.3.6.1.2.1.14.16.2.8

NA

NA

An ospfIfRxBadPacket trap signifies that Juniper OSPF


bad packet
an OSPF packet has been received on a
received
non-virtual interface that cannot be
parsed.

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies that


an OSPF packet has been received on a
virtual interface that cannot be parsed.

Juniper OSPF
bad packet
received on
virtual
interface

ospfTxRetrans .1.3.6.1.2.1.14.16.2.10
mit

NA

NA

An ospfTxRetransmit trap signifies than


an OSPF packet has been retransmitted
on a non-virtual interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies than


an OSPF packet has been retransmitted
on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies that a Juniper OSPF


new LSA
new LSA has been originated by this
originated
router. This trap should not be invoked
for simple refreshes of LSAs (which
happens every 30 minutes), but instead
will only be invoked when an LSA is
(re)originated due to a topology change.

ospfMaxAgeL
sa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies that


one of the LSA in the router's link-state
database has aged to MaxAge.

Juniper OSPF
LSA aged to
MaxAge

bgpBackward
Transition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event is


generated when the BGP FSM moves
from a higher numbered state to a lower
numbered state.

Juniper BGP
established
trap

bgpEstablishe
d

.1.3.6.1.2.1.15.7.1

1.3.6.1.2. = 6
1.15.3.1.
2

The BGP Established event is generated


when the BGP FSM enters the
ESTABLISHED state.

Juniper BGP
down trap

Trap Name

Trap OID

Description

Short
Description
Juniper OSPF
virtual
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-79

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Trap OID

newRoot

1.3.6.1.2.1.17.0.1

Juniper new
The newRoot trap indicates that the
sending agent has become the new root of root trap
the Spanning Tree; the trap is sent by a
bridge soon after its election as the new
root, e.g., upon expiration of the
Topology Change Timer, immediately
subsequent to its election.
Implementation of this trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.0.2

A topologyChange trap is sent by a


bridge when any of its configured ports
transitions from the Learning state to the
Forwarding state, or from the Forwarding
state to the Blocking state. The trap is not
sent if a newRoot trap is sent for the same
transition. Implementation of this trap is
optional.

Juniper
Spanning Tree
Topology
Changed

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can be
utilized by an NMS to trigger
logical/physical entity table maintenance
polls.
An agent should not generate more than
one entConfigChange 'notification-event'
in a given time interval (five seconds is
the suggested default). A
'notification-event' is the transmission of
a single trap or inform PDU to a list of
notification destinations.
If additional configuration changes occur
within the throttling period, then
notification-events for these changes
should be suppressed by the agent until
the current throttling period expires. At
the end of a throttling period, one
notification-event should be generated if
any configuration changes occurred since
the start of the throttling period. In such a
case, another throttling period is started
right away.
An NMS should periodically check the
value of entLastChangeTime to detect
any missed entConfigChange
notification-events, e.g., due to throttling
or transmission loss.

Juniper Entity
table
configuration
changed

entConfigCha
nge

Description

Short
Description

Trap Name

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-80

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap Name

Trap OID

mplsLspUp

1.3.6.1.4.1.2636.3.2.4.1

Subtype
Varbind
Value

Description

Short
Description

mplsLspUp trap signifies that the


specified LSP is up. The current active
path for the LSP is mplsPathName.

juniper mpls
Lsp Up trap

mplsLspDown 1.3.6.1.4.1.2636.3.2.4.2

mplsLspDown trap signifies that the


specified LSP is down, because the
current active path mplsPathName went
down.

juniper mpls
Lsp Down trap

mplsLspChang 1.3.6.1.4.1.2636.3.2.4.3
e

mplsLspChange trap signifies that the


specified LSP has switched traffic to the
new active path 'toLspPath'. The LSP
maintains up state before and after the
switch over

juniper mpls
Lsp Change
trap

mplsLspPathD 1.3.6.1.4.1.2636.3.2.4.4
own

mplsLspPathDown trap signifies that the juniper mpls


specified path mplsPathName for the
lsp path down
specified LSP mplsLspName went down trap

mplsLspPathU 1.3.6.1.4.1.2636.3.2.4.5
p

mplsLspPathUp trap signifies that the


specified path mplsPathName for the
specified LSP mplsLspName came up

juniper mpls
lsp path up
trap

apsEventSwitc 1.3.6.1.4.1.2636.3.24.2.
hover
0.1

An apsEventSwitchover notification is
sent when the value of an instance of
apsChanStatusSwitchovers increments.

juniper aps
event switch
over trap

apsEventMode 1.3.6.1.4.1.2636.3.24.2.
Mismatch
0.2

An apsEventModeMismatch notification juniper aps


is sent when the value of an instance of event mode
apsStatusModeMismatches increments. mismatch trap

apsEventChan
nelMismatch

juniper aps
An apsEventChannelMismatch
notification is sent when the value of an event channel
instance of apsStatusChannelMismatches mismatch trap
increments.

1.3.6.1.4.1.2636.3.24.2.
0.3

apsEventPSBF 1.3.6.1.4.1.2636.3.24.2.
0.4

apsEventPSBF notification is sent when


the value of an instance of
apsStatusPSBFs increments.

juniper aps
event psbf trap

apsEventFEPL 1.3.6.1.4.1.2636.3.24.2.
F
0.5

apsEventFEPLFs notification is sent


when the value of an instance of
apsStatusFEPLFs increments.

juniper aps
event feplf
trap

jnxVpnIfUp

jnxVpnIfUp notification is generated


when the interface with index
jnxVpnIfIndex belonging to the VPN
named jnxVpnIfVpnName of type
jnxVpnIfVpnType transitions out of the
'down' state.

Juniper VPN
Interface Up

1.3.6.1.4.1.2636.3.26.0.
1

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-81

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description
Juniper VPN
Interface
Down

jnxVpnIfDown 1.3.6.1.4.1.2636.3.26.0.
2

jnxVpnIfDown notification is generated


when the interface with index
jnxVpnIfIndex belonging to the VPN
named jnxVpnIfVpnName of type
jnxVpnIfVpnType transitions to the
'down' state.

jnxVpnPwUp

1.3.6.1.4.1.2636.3.26.0.
3

juniper vpn
jnxVpnPwUp notification is generated
power up trap
when the Pseudo-Wire with index
jnxVpnPwIndex belonging to the VPN
named jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out of the
'down' state.

jnxVpnPwDo
wn

1.3.6.1.4.1.2636.3.26.0.
4

jnxVpnPwDown notification is generated juniper vpn


power down
when the Pseudo-Wire with index
trap
jnxVpnPwIndex belonging to the VPN
named VpnPwVpnName of type
jnxVpnPwVpnType transitions to the
'down' state.

jnxPowerSupp 1.3.6.1.4.1.2636.4.1.1
lyFailure

juniper power
jnxFruPowerOff trap signifies that the
SNMP entity, acting in an agent role, has supply failure
Trap
detected that the specified FRU (Field
Replaceable Unit) has been powered off
in the chassis.

jnxFruOffline

1.3.6.1.4.1.2636.4.1.10

juniper fru
jnxFruOffline trap signifies that the
SNMP entity, acting in an agent role, has offline Trap
detected that the specified FRU (Field
Replaceable Unit)

jnxFruOnline

1.3.6.1.4.1.2636.4.1.11

juniper fru
jnxFruOnline trap signifies that the
SNMP entity, acting in an agent role, has online Trap
detected that the specified FRU (Field
Replaceable Unit) has gone online in the
chassis.

jnxFruCheck

1.3.6.1.4.1.2636.4.1.12

juniper fru
jnxFruCheck trap signifies that the
SNMP entity, acting in an agent role, has check Trap
detected that the specified FRU (Field
Replaceable Unit) has encountered some
operational errors and gone into check
state in the chassis.

jnxFanFailure

1.3.6.1.4.1.2636.4.1.2

juniper fan
jnxFanFailure trap signifies that the
SNMP entity, acting in an agent role, has failure Trap
detected that the specified cooling fan or
impeller in the chassis has been in the
failure (not spinning) condition.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-82

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Trap Name

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxOverTempe 1.3.6.1.4.1.2636.4.1.3
rature

juniper over
jnxOverTemperature trap signifies that
the SNMP entity, acting in an agent role, temperature
has detected that the specified hardware Trap
component in the chassis has experienced
over temperature condition.

jnxRedundanc
ySwitchover

jnxRedundancySwitchover trap signifies


that the SNMP entity, acting in an agent
role, has detected that the specified
hardware component in the chassis has
experienced a redundancy switchover
event defined as a change in state of
jnxRedundancyState from master to
backup or vice versa.

1.3.6.1.4.1.2636.4.1.4

juniper
redundancy
switch over
Trap

jnxFruRemova 1.3.6.1.4.1.2636.4.1.5
l

juniper fru
jnxFruRemoval trap signifies that the
SNMP entity, acting in an agent role, has removal Trap
detected that the specified FRU (Field
Replaceable Unit) has been removed
from the chassis.

jnxFruInsertio
n

juniper fru
jnxFruInsertion trap signifies that the
SNMP entity, acting in an agent role, has insertion Trap
detected that the specified FRU (Field
Replaceable Unit) has been inserted into
the chassis.

1.3.6.1.4.1.2636.4.1.6

jnxFruPowerO 1.3.6.1.4.1.2636.4.1.7
ff

Card Down
jnxFruPowerOff trap signifies that the
SNMP entity, acting in an agent role, has Trap
detected that the specified FRU (Field
Replaceable Unit) has been powered off
in the chassis.

jnxFruPowerO 1.3.6.1.4.1.2636.4.1.8
n

Card Up Trap
jnxFruPowerOn trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified FRU (Field
Replaceable Unit) has been powered on
in the chassis.

jnxFruFailed

1.3.6.1.4.1.2636.4.1.9

This indicates the specified FRU (Field


Replaceable Unit) has failed in the
chassis. Most probably this is due toi
some hard error such as fru is not
powering up or not able to load ukernel.
In these cases, fru is replaced.

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.1.2636.4.10.0.
1

This indicates a Service PIC has entered juniper Sp svc


a more severe memory-usage zone from a set zone
less severe memory usage zone. The zone entered trap
entered is identified by
jnxSpSvcSetIfMemoryZone.

juniper fru
failed Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-83

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

Trap Name

Trap OID

jnxSpSvcSetZ
oneExited

1.3.6.1.4.1.2636.4.10.0.
2

This indicates a Service Pic has exited a juniper Sp svc


more severe memory-usage zone to a less set zone exited
trap
severe memory usage zone. The zone
exited is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetC
puExceeded

1.3.6.1.4.1.2636.4.10.0.
3

This indicates a Service Pic has exceeded juniper Sp svc


its internal threshold for CPU utilization set cpu
(85%).
exceeded trap

jnxSpSvcSetC
puOk

1.3.6.1.4.1.2636.4.10.0.
4

This indicates a Service Pic has exceeded juniper Sp svc


its internal threshold for CPU utilization set cpu ok trap
(85%).

jnxDfcSoftPps 1.3.6.1.4.1.2636.4.11.0.
ThresholdExce 1
eded

Notification of input packet rate (in


packet per second) going beyond the
configured limit.

juniper dfc
soft pps
threshold
exceeded trap

jnxDfcSoftPps 1.3.6.1.4.1.2636.4.11.0.
UnderThreshol 2
d

Notification of input packet rate (in


packet per second) dropping back to
below the configured limit.

juniper dfc
soft pps under
threshold trap

jnxDfcHardPp 1.3.6.1.4.1.2636.4.11.0.
sThresholdExc 3
eeded

Notification of input packet rate (in


packet per second) going beyond the
recommended limit.

juniper dfc
hard pps
threshold
exceeded trap

jnxDfcHardPp 1.3.6.1.4.1.2636.4.11.0.
sUnderThresh 4
old

Notification of input packet rate (in


packet per second) dropping back to
below the recommended limit.

juniper dfc
hard pps under
threshold trap

jnxDfcSoftMe 1.3.6.1.4.1.2636.4.11.0.
mThresholdEx 5
ceeded

Notification of memory overload


condition i.e memory usage is going
beyond the configured limit.

juniper dfc
soft mem
threshold
exceeded trap

jnxDfcSoftMe 1.3.6.1.4.1.2636.4.11.0.
mUnderThresh 6
old

Notification of memory usage dropping


back to below the configured limit.

juniper dfc
soft mem
under
threshold trap

jnxDfcHardM 1.3.6.1.4.1.2636.4.11.0.
emThresholdE 7
xceeded

Notification of memory overload


condition i.e memory usage is going
beyond the recommended limit.

juniper dfc
hard mem
threshold
exceeded trap

jnxDfcHardM 1.3.6.1.4.1.2636.4.11.0.
emUnderThres 8
hold

Notification of memory usage dropping


back to below the recommended limit.

juniper dfc
hard mem
under
threshold trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-84

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Trap Name

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxPowerSupp 1.3.6.1.4.1.2636.4.2.1
lyOK

juniper power
jnxPowerSupplyOK trap signifies that
the SNMP entity, acting in an agent role, supply ok trap
has detected that the specified power
supply in the chassis has recovered from
the failure (bad DC output) condition.

jnxFanOK

jnxFanOK trap signifies that the SNMP juniper fan ok


trap
entity, acting in an agent role, has
detected that the specified cooling fan or
impeller in the chassis has recovered
from the failure (not spinning) condition.

1.3.6.1.4.1.2636.4.2.2

jnxTemperatur 1.3.6.1.4.1.2636.4.2.3
eOK

jnxTemperatureOK trap signifies that the juniper


SNMP entity, acting in an agent role, has temperature
ok trap
detected that the specified hardware
component in the chassis has recovered
from over temperature condition.

jnxRmonAlar
mGetFailure

1.3.6.1.4.1.2636.4.3.0.1

The SNMP trap that is generated when


the get request for an alarm variable
returns an error. The specific error is
identified by
jnxRmonAlarmGetFailReason.

juniper Rmon
alarm get
failure trap

jnxRmonGetO 1.3.6.1.4.1.2636.4.3.0.2
k

The SNMP trap that is generated when


the get request for an alarm variable is
successful. This is only sent after
previous attempts were unsuccessful.

juniper Rmon
get ok trap

jnxLdpLspUp

1.3.6.1.4.1.2636.4.4.0.1

The SNMP trap that is generated when an juniper Ldp


LSP comes up.
Lsp Up trap

jnxLdpLspDo
wn

1.3.6.1.4.1.2636.4.4.0.2

The SNMP trap that is generated when


the LSP goes down.

jnxLdpSesUp

1.3.6.1.4.1.2636.4.4.0.3

The SNMP trap that is generated when


juniper ldp
the value of 'mplsLdpSesState' enters the session up trap
'operational(5) state.

jnxLdpSesDo
wn

1.3.6.1.4.1.2636.4.4.0.4

juniper ldp
The SNMP trap that is generated when
the value of 'mplsLdpSesState' leaves the session down
trap
'operational(5) state. The value of
jnxLdpSesDownIf is one of the
neighbor's interface. It is the interface
associated with the last neighbor when
jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.1.2636.4.5.0.1

Notification of a configuration
management event as recorded in
jnxCmCfgChgEventTable.

juniper Ldp
Lsp Down trap

juniper Cm
cfg change
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-85

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

Trap Name

Trap OID

jnxCmRescue
Change

1.3.6.1.4.1.2636.4.5.0.2

Notification of the latest rescue


configuration change.

juniper Cm
rescue change
trap

jnxSonetAlar
mSet

1.3.6.1.4.1.2636.4.6.0.1

Notification of a recently set


SONET/SDH alarm.

juniper sonet
alarm set trap

jnxSonetAlar
mCleared

1.3.6.1.4.1.2636.4.6.0.2

Notification of a recently cleared


SONET/SDH alarm.

juniper sonet
alarm cleared
trap

jnxPMonOverl 1.3.6.1.4.1.2636.4.7.0.1
oadSet

Notification of a new overload condition juniper PMon


on a Passive Monitoring interface.
overload set
trap

jnxPMonOverl 1.3.6.1.4.1.2636.4.7.0.2
oadCleared

Notification of a cleared overload


condition on a Passive Monitoring
interface.

jnxCollUnavai 1.3.6.1.4.1.2636.4.8.0.1
lableDest

Notification of an unavailable destination juniper coll


failure encountered while transferring a unavailable
dest trap
collector file.

jnxCollUnavai 1.3.6.1.4.1.2636.4.8.0.2
lableDestClear
ed

This indicates a previous unavailable


destination failure has been resolved.

juniper coll
unavailable
dest cleared
trap

jnxCollUnsucc 1.3.6.1.4.1.2636.4.8.0.3
essfulTransfer

This indicates an error was encountered


while attempting a file transfer.

juniper coll
unsuccessful
transfer trap

jnxCollFlowO
verload

1.3.6.1.4.1.2636.4.8.0.4

This indicates a soft or hard flow


overload condition has been triggered.

juniper coll
flow overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.1.2636.4.8.0.5

This indicates a soft or hard flow


overload condition has been cleared.

juniper coll
flow overload
cleared trap

jnxCollMemor 1.3.6.1.4.1.2636.4.8.0.6
yUnavailable

This indicates a memory unavailable


condition has been triggered.

juniper coll
memory
unavailable
trap

jnxCollMemor 1.3.6.1.4.1.2636.4.8.0.7
yAvailable

This indicates a memory unavailable


condition has been cleared.

juniper coll
memory
available trap

jnxCollFtpSwi 1.3.6.1.4.1.2636.4.8.0.8
tchover

This indicates an FTP server switchover


has occurred.

juniper coll ftp


switch over
trap

juniper PMon
overload
cleared trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-86

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Trap Name

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingRttThr 1.3.6.1.4.1.2636.4.9.0.1
esholdExceede
d

juniper ping
This notification is generated when the
round trip time (jnxPingCtlRttThreshold) rtt threshold
exceeded trap
exceeds the configured threshold
(jnxPingCtlRttThreshold) and the
rttThreshold bit is set in
jnxPingCtlTrapGeneration.

jnxPingRttStd
DevThreshold
Exceeded

This notification is generated when the


standard deviation of the round trip time
(jnxPingResultsStdDevRttUs) exceeds
the configured threshold
(jnxPingCtlRttStdDevThreshold) and the
rttStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded trap

jnxPingRttJitte 1.3.6.1.4.1.2636.4.9.0.3
rThresholdExc
eeded

This notification is generated when the


round trip time jitter
(jnxPingResultsMaxRttUs minus
jnxPingResultsMinRttUs) exceeds the
configured threshold
(jnxPingCtlRttJitterThreshold) and the
rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded trap

jnxPingEgress 1.3.6.1.4.1.2636.4.9.0.4
ThresholdExce
eded

This notification is generated when the


egress time (jnxPingResultsEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressTimeThreshold) and
the egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded trap

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.1.2636.4.9.0.5

This notification is generated when the


standard deviation of the egress time
(jnxPingResultsStddevEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressStdDevThreshold) and
the egressStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress std dev
threshold
exceeded trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.1.2636.4.9.0.6

This notification is generated when the


egress time jitter
(jnxPingResultsMaxEgressUs minus
jnxPingResultsMinEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressJitterThreshold) and
the egressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded trap

1.3.6.1.4.1.2636.4.9.0.2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-87

Chapter 10

Traps

Juniper M-Series V2 Traps

Table 10-15

Trap Name

Juniper M-Series V2 Traps (Continued)

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.7
ThresholdExce
eded

This notification is generated when the


ingress time (jnxPingResultsIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressTimeThreshold) and
the ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded trap

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.8
StddevThresho
ldExceeded

This notification is generated when the


standard deviation of the ingress time
(jnxPingResultsStddevIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressStddevThreshold) and
the ingressStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress std dev
threshold
exceeded trap

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.9
JitterThreshol
dExceeded

This notification is generated when the


ingress time jitter
(jnxPingResultsMaxIngressUs minus
jnxPingResultsMinIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressJitterThreshold) and
the ingressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded trap

jnxBgpM2Esta 1.3.6.1.4.1.2636.5.1.1.1.
blished
0.1

The BGP Established event is generated


when the BGP FSM enters the
ESTABLISHED state.

juniper bgp
M2
established
trap

jnxBgpM2Bac 1.3.6.1.4.1.2636.5.1.1.1.
kwardTransitio 0.2
n

The BGPBackwardTransition Event is


generated when the BGP FSM moves
from a higher numbered state to a lower
numbered state.

juniper bgp
M2 backward
transition trap

coldStart

1.3.6.1.6.3.1.1.5.1

A coldStart trap signifies that the SNMP Juniper Cold


start trap
entity, supporting a notification
originator application, is reinitializing
itself and that its configuration may have
been altered.

warmStart

1.3.6.1.6.3.1.1.5.2

A warmStart trap signifies that the SNMP Juniper Warm


start trap
entity, supporting a notification
originator application, is reinitializing
itself such that its configuration is
unaltered.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-88

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps

Table 10-15

Juniper M-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

Trap Name

Trap OID

linkDown

1.3.6.1.6.3.1.1.5.3

A linkDown trap signifies that the SNMP Juniper Line


down trap
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links is about to
enter the down state from some other
state (but not from the notPresent state).
This other state is indicated by the
included value of ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

Juniper Line
A linkUp trap signifies that the SNMP
up trap
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links left the
down state and transitioned into some
other state (but not into the notPresent
state). This other state is indicated by the
included value of ifOperStatus.

authentication
Failure

1.3.6.1.6.3.1.1.5.5

Juniper SNMP
An authenticationFailure trap signifies
authentication
that the SNMP entity has received a
failure
protocol message that is not properly
authenticated. While all implementations
of SNMP entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-89

Chapter 10

Traps

Juniper MX-Series V1 Traps

Juniper MX-Series V1 Traps


Table 10-16 lists the Juniper MX-Series V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-43.
Table 10-16

Juniper MX-Series V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtIfState 6
Change

1.3.6.1.2.
1.14.16.2

NA

NA

ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
interface state
changed to
Down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.10.1
.6

ospfNbrStateChange trap signifies


that there has been a change in the
state of a non-virtual OSPF
neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

Juniper OSPF
neighbor state
down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.10.1
.6

ospfNbrStateChange trap signifies


that there has been a change in the
state of a non-virtual OSPF
neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or
progresses to a terminal state (e.g.,
2-Way or Full).

Juniper OSPF
neighbor state
up

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.11.1
.5

ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to 1-Way
or Down) or progresses to a terminal
state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-90

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.11.1
.5

ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to 1-Way
or Down) or progresses to a terminal
state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

1.3.6.1.2.
1.14.16.2

NA

NA

ospfIfConfigError trap signifies that


a packet has been received on a
non-virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf 6
igError

1.3.6.1.2.
1.14.16.2

NA

NA

ospfConfigError trap signifies that a


packet has been received on a virtual
interface from a router whose
configuration parameters conflict
with this router's configuration
parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

ospfIfAuthFailure trap signifies that


a packet has been received on a
non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

ospfVirtIfAuth 6
Failure

1.3.6.1.2.
1.14.16.2

NA

NA

ospfVirtIfAuthFailure trap signifies


that a packet has been received on a
virtual interface from a router whose
authentication key or authentication
type conflicts with this router's
authentication key or authentication
type.

Juniper OSPF
virtual
interface
authentication
failure

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

ospfIfRxBadPacket trap signifies


that an OSPF packet has been
received on a non-virtual interface
that cannot be parsed.

Juniper OSPF
bad packet
received

ospfVirtIfRxB
adPacket

1.3.6.1.2.
1.14.16.2

NA

NA

ospfRxBadPacket trap signifies that


an OSPF packet has been received
on a virtual interface that cannot be
parsed.

Juniper OSPF
bad packet
received on
virtual
interface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-91

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

11

1.3.6.1.2.
1.14.16.2

NA

NA

ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

ospfOriginateLsa trap signifies that Juniper OSPF


a new LSA has been originated by new LSA
this router. This trap should not be originated
invoked for simple refreshes of
LSAs (which happens every 30
minutes), but instead will only be
invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

ospfMaxAgeLsa trap signifies that


one of the LSA in the router's
link-state database has aged to
MaxAge.

Juniper OSPF
LSA aged to
MaxAge

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 1
1.14.7.1.
12

ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

Juniper OSPF
interface state
changed to
Down

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 1
1.14.7.1.
12

Juniper OSPF
ospfIfStateChange trap signifies
that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other,
Dr, or Backup)

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

Juniper BGP
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-92

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

1.3.6.1.2. 1
1.15.3.1.
2

Description

Short
Description

The BGPBackwardTransition Event Juniper BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

newRoot

1.3.6.1.2.
1.17.0

The newRoot trap indicates that the Juniper new


sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

topologyChan
ge

1.3.6.1.2.
1.17.0

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent if
a newRoot trap is sent for the same
transition. Implementation of this
trap is optional.

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-93

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

entConfigCha
nge

1.3.6.1.2.
1.47.2.0

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

Juniper Entity
table
configuration
changed

mplsLspUp

1.3.6.1.4.
1.2636.3.2
.4

mplsLspUp trap signifies that the


specified LSP is up. The current
active path for the LSP is
mplsPathName.

juniper mpls
Lsp Up trap

mplsLspDown 6

1.3.6.1.4.
1.2636.3.2
.4

mplsLspDown trap signifies that the juniper mpls


specified LSP is down, because the Lsp Down trap
current active path mplsPathName
went down.

mplsLspChang 6
e

1.3.6.1.4.
1.2636.3.2
.4

juniper mpls
mplsLspChange trap signifies that
Lsp Change
the specified LSP has switched
trap
traffic to the new active path
'toLspPath'. The LSP maintains up
state before and after the switch over

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-94

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
juniper mpls
lsp path down
trap

mplsLspPathD 6
own

1.3.6.1.4.
1.2636.3.2
.4

mplsLspPathDown trap signifies


that the specified path
mplsPathName for the specified
LSP mplsLspName went down

mplsLspPathU 6
p

1.3.6.1.4.
1.2636.3.2
.4

juniper mpls
mplsLspPathUp trap signifies that
lsp path up
the specified path mplsPathName
for the specified LSP mplsLspName trap
came up

apsEventSwitc 6
hover

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventSwitchover notification is juniper aps


sent when the value of an instance of event switch
over trap
apsChanStatusSwitchovers
increments.

apsEventMode 6
Mismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
apsEventModeMismatch
notification is sent when the value of event mode
mismatch trap
an instance of
apsStatusModeMismatches
increments.

apsEventChan
nelMismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
apsEventChannelMismatch
notification is sent when the value of event channel
mismatch trap
an instance of
apsStatusChannelMismatches
increments.

apsEventPSBF 6

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventPSBF notification is sent


when the value of an instance of
apsStatusPSBFs increments.

apsEventFEPL 6
F

1.3.6.1.4.
1.2636.3.2
4.2.0

apsEventFEPLFs notification is sent juniper aps


event feplf
when the value of an instance of
trap
apsStatusFEPLFs increments.

jnxVpnIfUp

1.3.6.1.4.
1.2636.3.2
6.0

Juniper VPN
jnxVpnIfUp notification is
Interface Up
generated when the interface with
index jnxVpnIfIndex belonging to
the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType
transitions out of the 'down' state.

jnxVpnIfDown 6

1.3.6.1.4.
1.2636.3.2
6.0

Juniper VPN
jnxVpnIfDown notification is
Interface
generated when the interface with
Down
index jnxVpnIfIndex belonging to
the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType
transitions to the 'down' state.

juniper aps
event psbf trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-95

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxVpnPwUp

1.3.6.1.4.
1.2636.3.2
6.0

jnxVpnPwUp notification is
generated when the Pseudo-Wire
with index jnxVpnPwIndex
belonging to the VPN named
jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out
of the 'down' state.

juniper vpn
power up trap

jnxVpnPwDo
wn

1.3.6.1.4.
1.2636.3.2
6.0

jnxVpnPwDown notification is
generated when the Pseudo-Wire
with index jnxVpnPwIndex
belonging to the VPN named
VpnPwVpnName of type
jnxVpnPwVpnType transitions to
the 'down' state.

juniper vpn
power down
trap

jnxPowerSupp 6
lyFailure

1.3.6.1.4.
1.2636.4.1

jnxFruPowerOff trap signifies that juniper power


the SNMP entity, acting in an agent supply failure
role, has detected that the specified Trap
FRU (Field Replaceable Unit) has
been powered off in the chassis.

jnxFanFailure

1.3.6.1.4.
1.2636.4.1

jnxFanFailure trap signifies that the juniper fan


failure Trap
SNMP entity, acting in an agent
role, has detected that the specified
cooling fan or impeller in the
chassis has been in the failure (not
spinning) condition.

jnxOverTempe 6
rature

1.3.6.1.4.
1.2636.4.1

jnxOverTemperature trap signifies


that the SNMP entity, acting in an
agent role, has detected that the
specified hardware component in
the chassis has experienced over
temperature condition.

juniper over
temperature
Trap

jnxRedundanc
ySwitchover

1.3.6.1.4.
1.2636.4.1

jnxRedundancySwitchover trap
signifies that the SNMP entity,
acting in an agent role, has detected
that the specified hardware
component in the chassis has
experienced a redundancy
switchover event defined as a
change in state of
jnxRedundancyState from master to
backup or vice versa.

juniper
redundancy
switch over
Trap

Subtype
Varbind
Value

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-96

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxFruRemova 6
l

1.3.6.1.4.
1.2636.4.1

Card Out trap


jnxFruRemoval trap signifies that
the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been removed from the chassis.

jnxFruInsertio
n

1.3.6.1.4.
1.2636.4.1

Card In trap
jnxFruInsertion trap signifies that
the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been inserted into the chassis.

jnxFruPowerO 6
ff

1.3.6.1.4.
1.2636.4.1

jnxFruPowerOff trap signifies that Card Down


the SNMP entity, acting in an agent Trap
role, has detected that the specified
FRU (Field Replaceable Unit) has
been powered off in the chassis.

jnxFruPowerO 6
n

1.3.6.1.4.
1.2636.4.1

Card Up Trap
jnxFruPowerOn trap signifies that
the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been powered on in the chassis.

jnxFruFailed

1.3.6.1.4.
1.2636.4.1

juniper fru
This indicates the specified FRU
(Field Replaceable Unit) has failed failed Trap
in the chassis. Most probably this is
due toi some hard error such as fru is
not powering up or not able to load
ukernel. In these cases, fru is
replaced.

jnxFruOffline

10

1.3.6.1.4.
1.2636.4.1

jnxFruOffline trap signifies that the juniper fru


offline Trap
SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit)

jnxFruOnline

11

1.3.6.1.4.
1.2636.4.1

jnxFruOnline trap signifies that the


SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
gone online in the chassis.

jnxFruCheck

12

1.3.6.1.4.
1.2636.4.1

jnxFruCheck trap signifies that the juniper fru


check Trap
SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
encountered some operational errors
and gone into check state in the
chassis.

juniper fru
online Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-97

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
juniper Sp svc
set zone
entered trap

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service PIC has


entered a more severe
memory-usage zone from a less
severe memory usage zone. The
zone entered is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetZ
oneExited

1.3.6.1.4.
1.2636.4.1
0.0

juniper Sp svc
This indicates a Service Pic has
exited a more severe memory-usage set zone exited
zone to a less severe memory usage trap
zone. The zone exited is identified
by jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetC
puExceeded

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


exceeded its internal threshold for
CPU utilization (85%).

juniper Sp svc
set cpu
exceeded trap

jnxSpSvcSetC
puOk

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


exceeded its internal threshold for
CPU utilization (85%).

juniper Sp svc
set cpu ok trap

jnxDfcSoftPps 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) going beyond the soft pps
threshold
configured limit.
exceeded trap

jnxDfcSoftPps 6
UnderThreshol
d

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) dropping back to soft pps under
threshold trap
below the configured limit.

jnxDfcHardPp 6
sThresholdExc
eeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) going beyond the hard pps
recommended limit.
threshold
exceeded trap

jnxDfcHardPp 6
sUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) dropping back to hard pps under
below the recommended limit.
threshold trap

jnxDfcSoftMe 6
mThresholdEx
ceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


juniper dfc
condition i.e memory usage is going soft mem
beyond the configured limit.
threshold
exceeded trap

jnxDfcSoftMe 6
mUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage


dropping back to below the
configured limit.

jnxDfcHardM 6
emThresholdE
xceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


juniper dfc
condition i.e memory usage is going hard mem
beyond the recommended limit.
threshold
exceeded trap

juniper dfc
soft mem
under
threshold trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-98

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxDfcHardM 6
emUnderThres
hold

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage


dropping back to below the
recommended limit.

juniper dfc
hard mem
under
threshold trap

jnxPowerSupp 6
lyOK

1.3.6.1.4.
1.2636.4.2

jnxPowerSupplyOK trap signifies


that the SNMP entity, acting in an
agent role, has detected that the
specified power supply in the
chassis has recovered from the
failure (bad DC output) condition.

juniper power
supply ok trap

jnxFanOK

1.3.6.1.4.
1.2636.4.2

jnxFanOK trap signifies that the


SNMP entity, acting in an agent
role, has detected that the specified
cooling fan or impeller in the
chassis has recovered from the
failure (not spinning) condition.

juniper fan ok
trap

jnxTemperatur 6
eOK

1.3.6.1.4.
1.2636.4.2

juniper
jnxTemperatureOK trap signifies
temperature
that the SNMP entity, acting in an
ok trap
agent role, has detected that the
specified hardware component in
the chassis has recovered from over
temperature condition.

jnxRmonAlar
mGetFailure

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated


when the get request for an alarm
variable returns an error. The
specific error is identified by
jnxRmonAlarmGetFailReason.

juniper Rmon
alarm get
failure trap

jnxRmonGetO 6
k

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated


when the get request for an alarm
variable is successful. This is only
sent after previous attempts were
unsuccessful.

juniper Rmon
get ok trap

jnxLdpLspUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


when an LSP comes up.

juniper Ldp
Lsp Up trap

jnxLdpLspDo
wn

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


when the LSP goes down.

juniper Ldp
Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


juniper ldp
when the value of 'mplsLdpSesState' session up trap
enters the 'operational(5) state.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-99

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxLdpSesDo
wn

1.3.6.1.4.
1.2636.4.4
.0

juniper ldp
The SNMP trap that is generated
when the value of 'mplsLdpSesState' session down
leaves the 'operational(5) state. The trap
value of jnxLdpSesDownIf is one of
the neighbor's interface. It is the
interface associated with the last
neighbor when
jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.
1.2636.4.5
.0

Notification of a configuration
management event as recorded in
jnxCmCfgChgEventTable.

juniper Cm
cfg change
trap

jnxCmRescue
Change

1.3.6.1.4.
1.2636.4.5
.0

Notification of the latest rescue


configuration change.

juniper Cm
rescue change
trap

jnxSonetAlar
mSet

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently set


SONET/SDH alarm.

juniper sonet
alarm set trap

jnxSonetAlar
mCleared

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently cleared


SONET/SDH alarm.

juniper sonet
alarm cleared
trap

jnxPMonOverl 6
oadSet

1.3.6.1.4.
1.2636.4.7
.0

Notification of a new overload


condition on a Passive Monitoring
interface.

juniper PMon
overload set
trap

jnxPMonOverl 6
oadCleared

1.3.6.1.4.
1.2636.4.7
.0

Notification of a cleared overload


condition on a Passive Monitoring
interface.

juniper PMon
overload
cleared trap

jnxCollUnavai 6
lableDest

1.3.6.1.4.
1.2636.4.8
.0

Notification of an unavailable
destination failure encountered
while transferring a collector file.

juniper coll
unavailable
dest trap

jnxCollUnavai 6
lableDestClear
ed

1.3.6.1.4.
1.2636.4.8
.0

This indicates a previous


unavailable destination failure has
been resolved.

juniper coll
unavailable
dest cleared
trap

jnxCollUnsucc 6
essfulTransfer

1.3.6.1.4.
1.2636.4.8
.0

This indicates an error was


encountered while attempting a file
transfer.

juniper coll
unsuccessful
transfer trap

jnxCollFlowO
verload

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


overload condition has been
triggered.

juniper coll
flow overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


juniper coll
overload condition has been cleared. flow overload
cleared trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-100

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxCollMemor 6
yUnavailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable juniper coll


condition has been triggered.
memory
unavailable
trap

jnxCollMemor 6
yAvailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable juniper coll


condition has been cleared.
memory
available trap

jnxCollFtpSwi 6
tchover

1.3.6.1.4.
1.2636.4.8
.0

This indicates an FTP server


switchover has occurred.

juniper coll ftp


switch over
trap

jnxPingRttThr 6
esholdExceede
d

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the round trip time
(jnxPingCtlRttThreshold) exceeds
the configured threshold
(jnxPingCtlRttThreshold) and the
rttThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt threshold
exceeded trap

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the round
trip time
(jnxPingResultsStdDevRttUs)
exceeds the configured threshold
(jnxPingCtlRttStdDevThreshold)
and the rttStdDevThreshold bit is set
in jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded trap

jnxPingRttJitte 6
rThresholdExc
eeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the round trip time jitter
(jnxPingResultsMaxRttUs minus
jnxPingResultsMinRttUs) exceeds
the configured threshold
(jnxPingCtlRttJitterThreshold) and
the rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded trap

jnxPingEgress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the egress time
(jnxPingResultsEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressTimeThreshold)
and the egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded trap

jnxPingRttStd
DevThreshold
Exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-101

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the egress
time
(jnxPingResultsStddevEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressStdDevThreshold
) and the egressStdDevThreshold bit
is set in jnxPingCtlTrapGeneration.

juniper ping
egress std dev
threshold
exceeded trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the egress time jitter
(jnxPingResultsMaxEgressUs
minus jnxPingResultsMinEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressJitterThreshold)
and the egressJitterThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded trap

jnxPingIngress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the ingress time
(jnxPingResultsIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressTimeThreshold)
and the ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded trap

jnxPingIngress 6
StddevThresho
ldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the ingress
time
(jnxPingResultsStddevIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressStddevThreshold
) and the ingressStdDevThreshold
bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress std dev
threshold
exceeded trap

jnxPingIngress 6
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the ingress time jitter
(jnxPingResultsMaxIngressUs
minus
jnxPingResultsMinIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressJitterThreshold)
and the ingressJitterThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded trap

jnxBgpM2Esta 6
blished

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

juniper bgp
M2
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-102

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxBgpM2Bac 6
kwardTransitio
n

Subtype
Varbind
Value

Description

Short
Description

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGPBackwardTransition Event juniper bgp


M2 backward
is generated when the BGP FSM
moves from a higher numbered state transition trap
to a lower numbered state.

coldStart

1.3.6.1.6.
3.1.1.5

A coldStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself and that its
configuration may have been
altered.

Juniper Cold
start trap

warmStart

1.3.6.1.6.
3.1.1.5

A warmStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself such that its
configuration is unaltered.

Juniper Warm
start trap

linkDown

1.3.6.1.6.
3.1.1.5

Juniper Line
A linkDown trap signifies that the
down trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

linkUp

1.3.6.1.6.
3.1.1.5

Juniper Line
A linkUp trap signifies that the
up trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

authentication
Failure

1.3.6.1.6.
3.1.1.5

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated. While
all implementations of SNMP
entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Juniper SNMP
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-103

Chapter 10

Traps

Juniper MX-Series V1 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

isisdatabaseov
erload

1.3.6.1.2.
1.138.0.1

juniper isis
database
overload trap

isisManualAd
dressDrops

1.3.6.1.2.
1.138.0.2

juniper isis
manual
address drops
trap

isisCorruptedL 6
SPDetected

1.3.6.1.2.
1.138.0.3

juniper isis
corrupted lsp
detected trap

isisAttemptTo
ExceedMaxSe
quence

1.3.6.1.2.
1.138.0.4

juniper isis
attempt to
exceed
maxsequence
trap

isisIDLenMis
match

1.3.6.1.2.
1.138.0.5

juniper isis ID
Len mismatch
trap

isisMaxAreaA
ddressesMism
atch

1.3.6.1.2.
1.138.0.6

juniper isis
max area
addresses
mismatch trap

isisOwnLSPPu 6
rge

1.3.6.1.2.
1.138.0.7

juniper isis
own lsp purge
trap

isisSequenceN 6
umberSkip

1.3.6.1.2.
1.138.0.8

juniper isis
sequence
number skip
trap

isisAuthenticat 6
ionTypeFailur
e

1.3.6.1.2.
1.138.0.9

juniper isis
authentication
type failure

isisAuthenticat 6
ionFailure

10

1.3.6.1.2.
1.138.0.10

juniper isis
authentication
Failure

isisVersionSke 6
w

11

1.3.6.1.2.
1.138.0.11

juniper isis
version skew

isisAreaMisma 6
tch

12

1.3.6.1.2.
1.138.0.12

juniper isis
area mismatch

isisRejectedAd 6
jacency

13

1.3.6.1.2.
1.138.0.13

juniper isis
rejected
adjacency

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-104

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-16

Juniper MX-Series V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

isisLSPTooLar 6
geToPropagate

14

1.3.6.1.2.
1.138.0.14

juniper isis lsp


too large

isisOrigLSPBu 6
ffSizeMismatc
h

15

1.3.6.1.2.
1.138.0.15

juniper isis
orig lsp buffer
size mismatch

isisProtocolsS 6
upportedMism
atch

16

1.3.6.1.2.
1.138.0.16

juniper isis
protocols
supported
mismatch

isisAdjacency
Change

17

1.3.6.1.2.
1.138.0.17

juniper isis
adjacency
change

isisLSPErrorD 6
etected

18

1.3.6.1.2.
1.138.0.18

juniper isis lsp


error detected

Juniper MX-Series V2 Traps


Table 10-17 lists the Juniper MX-Series V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-44.
Table 10-17

Trap Name

Juniper MX-Series V2 Traps

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. = 1
1.14.7.1.
12

ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to
Down

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1.2. != 1
1.14.7.1.
12

ospfIfStateChange trap signifies that


there has been a change in the state of a
non-virtualOSPF interface. This trap
should be generated when the interface
state regresses (e.g., goes from Dr to
Down) or progresses to a terminal state
(i.e., Point-to-Point, DR Other, Dr, or
Backup)

Juniper OSPF
interface state
changed to Up

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-105

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

ospfVirtIfState .1.3.6.1.2.1.14.16.2.1
Change

NA

NA

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1.2. != 8
1.14.10.1
.6

ospfNbrStateChange trap signifies that Juniper OSPF


there has been a change in the state of a neighbor state
down
non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full).

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1.2. = 8
1.14.10.1
.6

ospfNbrStateChange trap signifies that Juniper OSPF


there has been a change in the state of a neighbor state
up
non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt
or Full to 1-Way or Down) or progresses
to a terminal state (e.g., 2-Way or Full).

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. != 8
1.14.11.1
.5

ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or
Full to 1-Way or Down) or progresses to
a terminal state (e.g., Full).

Juniper OSPF
interface
configuration
error

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1.2. = 8
1.14.11.1
.5

ospfIfStateChange trap signifies that


there has been a change in the state of an
OSPF virtual neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or
Full to 1-Way or Down) or progresses to
a terminal state (e.g., Full).

Juniper OSPF
virtual
interface
configuration
error

ospfIfConfigE
rror

.1.3.6.1.2.1.14.16.2.4

NA

ospfIfConfigError trap signifies that a


packet has been received on a
non-virtual interface from a router
whose configuration parameters conflict
with this router's configuration
parameters.

Juniper OSPF
interface
configuration
error

Trap Name

Trap OID

NA

Description
ospfIfStateChange trap signifies that
there has been a change in the state of an
OSPF virtual interface. This trap should
be generated when the inter-face state
regresses (e.g., goes from Point-to-Point
to Down) or progresses to a terminal
state (i.e., Point-to-Point).

Short
Description
Juniper OSPF
virtual
interface state
changed to
Down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-106

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

ospfVirtIfConf .1.3.6.1.2.1.14.16.2.5
igError

NA

ospfIfAuthFail .1.3.6.1.2.1.14.16.2.6
ure

Description

Short
Description

NA

ospfConfigError trap signifies that a


packet has been received on a virtual
interface from a router whose
configuration parameters conflict with
this router's configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

NA

NA

ospfIfAuthFailure trap signifies that a


packet has been received on a
non-virtual interface from a router
whose authentication key or
authentication type conflicts with this
router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

ospfVirtIfAuth .1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

ospfVirtIfAuthFailure trap signifies that


a packet has been received on a virtual
interface from a router whose
authentication key or authentication type
conflicts with this router's authentication
key or authentication type.

Juniper OSPF
virtual
interface
authentication
failure

ospfIfRxBadP
acket

.1.3.6.1.2.1.14.16.2.8

NA

NA

ospfIfRxBadPacket trap signifies that an Juniper OSPF


bad packet
OSPF packet has been received on a
received
non-virtual interface that cannot be
parsed.

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

ospfRxBadPacket trap signifies that an


OSPF packet has been received on a
virtual interface that cannot be parsed.

ospfTxRetrans .1.3.6.1.2.1.14.16.2.10
mit

NA

NA

ospfTxRetransmit trap signifies than an Juniper OSPF


OSPF packet has been retransmitted on a packet
non-virtual interface.
retransmitted

ospfVirtIfTxR
etransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

ospfTxRetransmit trap signifies than an Juniper OSPF


OSPF packet has been retransmitted on a packet
virtual interface.
retransmitted
on virtual
interface

ospfOriginate
Lsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

Juniper OSPF
ospfOriginateLsa trap signifies that a
new LSA
new LSA has been originated by this
router. This trap should not be invoked originated
for simple refreshes of LSAs (which
happens every 30 minutes), but instead
will only be invoked when an LSA is
(re)originated due to a topology change.

Trap Name

Trap OID

Juniper OSPF
bad packet
received on
virtual
interface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-107

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

ospfMaxAgeL
sa

.1.3.6.1.2.1.14.16.2.13

NA

bgpBackward
Transition

.1.3.6.1.2.1.15.7.2

NA

bgpEstablishe
d

.1.3.6.1.2.1.15.7.1

newRoot

1.3.6.1.2.1.17.0.1

Juniper new
The newRoot trap indicates that the
sending agent has become the new root root trap
of the Spanning Tree; the trap is sent by
a bridge soon after its election as the new
root, e.g., upon expiration of the
Topology Change Timer, immediately
subsequent to its election.
Implementation of this trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.0.2

A topologyChange trap is sent by a


bridge when any of its configured ports
transitions from the Learning state to the
Forwarding state, or from the
Forwarding state to the Blocking state.
The trap is not sent if a newRoot trap is
sent for the same transition.
Implementation of this trap is optional.

Description

Short
Description

NA

ospfMaxAgeLsa trap signifies that one


of the LSA in the router's link-state
database has aged to MaxAge.

Juniper OSPF
LSA aged to
MaxAge

NA

Juniper BGP
The BGPBackwardTransition Event is
established
generated when the BGP FSM moves
from a higher numbered state to a lower trap
numbered state.

1.3.6.1.2. = 6
1.15.3.1.
2

The BGP Established event is generated Juniper BGP


when the BGP FSM enters the
down trap
ESTABLISHED state.

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-108

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

entConfigCha
nge

mplsLspUp

1.3.6.1.4.1.2636.3.2.4.1

Subtype
Varbind
Value

Description

Short
Description

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can be
utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more than
one entConfigChange
'notification-event' in a given time
interval (five seconds is the suggested
default). A 'notification-event' is the
transmission of a single trap or inform
PDU to a list of notification destinations.
If additional configuration changes
occur within the throttling period, then
notification-events for these changes
should be suppressed by the agent until
the current throttling period expires. At
the end of a throttling period, one
notification-event should be generated if
any configuration changes occurred
since the start of the throttling period. In
such a case, another throttling period is
started right away.
An NMS should periodically check the
value of entLastChangeTime to detect
any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

Juniper Entity
table
configuration
changed

mplsLspUp trap signifies that the


specified LSP is up. The current active
path for the LSP is mplsPathName.

juniper mpls
Lsp Up trap

mplsLspDown 1.3.6.1.4.1.2636.3.2.4.2

juniper mpls
mplsLspDown trap signifies that the
Lsp Down trap
specified LSP is down, because the
current active path mplsPathName went
down.

mplsLspChang 1.3.6.1.4.1.2636.3.2.4.3
e

juniper mpls
mplsLspChange trap signifies that the
specified LSP has switched traffic to the Lsp Change
trap
new active path 'toLspPath'. The LSP
maintains up state before and after the
switch over

mplsLspPathD 1.3.6.1.4.1.2636.3.2.4.4
own

mplsLspPathDown trap signifies that the juniper mpls


specified path mplsPathName for the
lsp path down
specified LSP mplsLspName went down trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-109

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

mplsLspPathU 1.3.6.1.4.1.2636.3.2.4.5
p

mplsLspPathUp trap signifies that the


specified path mplsPathName for the
specified LSP mplsLspName came up

juniper mpls
lsp path up
trap

apsEventSwitc 1.3.6.1.4.1.2636.3.24.2.0
hover
.1

apsEventSwitchover notification is sent


when the value of an instance of
apsChanStatusSwitchovers increments.

juniper aps
event switch
over trap

apsEventMode 1.3.6.1.4.1.2636.3.24.2.0
Mismatch
.2

apsEventModeMismatch notification is
sent when the value of an instance of
apsStatusModeMismatches increments.

juniper aps
event mode
mismatch trap

apsEventChan
nelMismatch

apsEventChannelMismatch notification
is sent when the value of an instance of
apsStatusChannelMismatches
increments.

juniper aps
event channel
mismatch trap

Trap Name

Trap OID

1.3.6.1.4.1.2636.3.24.2.0
.3

apsEventPSBF 1.3.6.1.4.1.2636.3.24.2.0
.4

apsEventPSBF notification is sent when juniper aps


the value of an instance of
event psbf trap
apsStatusPSBFs increments.

apsEventFEPL 1.3.6.1.4.1.2636.3.24.2.0
F
.5

apsEventFEPLFs notification is sent


when the value of an instance of
apsStatusFEPLFs increments.

juniper aps
event feplf
trap

jnxVpnIfUp

jnxVpnIfUp notification is generated


when the interface with index
jnxVpnIfIndex belonging to the VPN
named jnxVpnIfVpnName of type
jnxVpnIfVpnType transitions out of the
'down' state.

Juniper VPN
Interface Up

1.3.6.1.4.1.2636.3.26.0.1

jnxVpnIfDown 1.3.6.1.4.1.2636.3.26.0.2

jnxVpnIfDown notification is generated Juniper VPN


Interface
when the interface with index
Down
jnxVpnIfIndex belonging to the VPN
named jnxVpnIfVpnName of type
jnxVpnIfVpnType transitions to the
'down' state.

jnxVpnPwUp

1.3.6.1.4.1.2636.3.26.0.3

jnxVpnPwUp notification is generated


when the Pseudo-Wire with index
jnxVpnPwIndex belonging to the VPN
named jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out of
the 'down' state.

juniper vpn
power up trap

jnxVpnPwDo
wn

1.3.6.1.4.1.2636.3.26.0.4

jnxVpnPwDown notification is
generated when the Pseudo-Wire with
index jnxVpnPwIndex belonging to the
VPN named VpnPwVpnName of type
jnxVpnPwVpnType transitions to the
'down' state.

juniper vpn
power down
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-110

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxPowerSupp 1.3.6.1.4.1.2636.4.1.1
lyFailure

juniper power
jnxFruPowerOff trap signifies that the
SNMP entity, acting in an agent role, has supply failure
Trap
detected that the specified FRU (Field
Replaceable Unit) has been powered off
in the chassis.

jnxFruOffline

1.3.6.1.4.1.2636.4.1.10

juniper fru
jnxFruOffline trap signifies that the
SNMP entity, acting in an agent role, has offline Trap
detected that the specified FRU (Field
Replaceable Unit)

jnxFruOnline

1.3.6.1.4.1.2636.4.1.11

juniper fru
jnxFruOnline trap signifies that the
SNMP entity, acting in an agent role, has online Trap
detected that the specified FRU (Field
Replaceable Unit) has gone online in the
chassis.

jnxFruCheck

1.3.6.1.4.1.2636.4.1.12

juniper fru
jnxFruCheck trap signifies that the
SNMP entity, acting in an agent role, has check Trap
detected that the specified FRU (Field
Replaceable Unit) has encountered some
operational errors and gone into check
state in the chassis.

jnxFanFailure

1.3.6.1.4.1.2636.4.1.2

juniper fan
jnxFanFailure trap signifies that the
SNMP entity, acting in an agent role, has failure Trap
detected that the specified cooling fan or
impeller in the chassis has been in the
failure (not spinning) condition.

jnxOverTempe 1.3.6.1.4.1.2636.4.1.3
rature

jnxOverTemperature trap signifies that juniper over


the SNMP entity, acting in an agent role, temperature
has detected that the specified hardware Trap
component in the chassis has
experienced over temperature condition.

jnxRedundanc
ySwitchover

1.3.6.1.4.1.2636.4.1.4

jnxRedundancySwitchover trap signifies


that the SNMP entity, acting in an agent
role, has detected that the specified
hardware component in the chassis has
experienced a redundancy switchover
event defined as a change in state of
jnxRedundancyState from master to
backup or vice versa.

jnxFanFailure

1.3.6.1.4.1.2636.4.1.2

Card Out trap


A jnxFanFailure trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified cooling fan or
impeller in the chassis has been in the
failure (not spinning) condition.

juniper
redundancy
switch over
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-111

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

jnxOverTempe 1.3.6.1.4.1.2636.4.1.3
rature

Card In trap
A jnxOverTemperature trap signifies
that the SNMP entity, acting in an agent
role, has detected that the specified
hardware component in the chassis has
experienced over temperature condition.

jnxFruPowerO 1.3.6.1.4.1.2636.4.1.7
ff

Card Down
jnxFruPowerOff trap signifies that the
SNMP entity, acting in an agent role, has Trap
detected that the specified FRU (Field
Replaceable Unit) has been powered off
in the chassis.

jnxFruPowerO 1.3.6.1.4.1.2636.4.1.8
n

Card Up Trap
jnxFruPowerOn trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified FRU (Field
Replaceable Unit) has been powered on
in the chassis.

jnxFruFailed

1.3.6.1.4.1.2636.4.1.9

This indicates the specified FRU (Field juniper fru


failed Trap
Replaceable Unit) has failed in the
chassis. Most probably this is due toi
some hard error such as fru is not
powering up or not able to load ukernel.
In these cases, fru is replaced.

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.1.2636.4.10.0.1

This indicates a Service PIC has entered juniper Sp svc


a more severe memory-usage zone from set zone
entered trap
a less severe memory usage zone. The
zone entered is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetZ
oneExited

1.3.6.1.4.1.2636.4.10.0.2

This indicates a Service Pic has exited a juniper Sp svc


set zone exited
more severe memory-usage zone to a
trap
less severe memory usage zone. The
zone exited is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetC
puExceeded

1.3.6.1.4.1.2636.4.10.0.3

This indicates a Service Pic has


exceeded its internal threshold for CPU
utilization (85%).

juniper Sp svc
set cpu
exceeded trap

jnxSpSvcSetC
puOk

1.3.6.1.4.1.2636.4.10.0.4

This indicates a Service Pic has


exceeded its internal threshold for CPU
utilization (85%).

juniper Sp svc
set cpu ok trap

jnxDfcSoftPps 1.3.6.1.4.1.2636.4.11.0.1
ThresholdExce
eded

Notification of input packet rate (in


packet per second) going beyond the
configured limit.

juniper dfc
soft pps
threshold
exceeded trap

jnxDfcSoftPps 1.3.6.1.4.1.2636.4.11.0.2
UnderThreshol
d

Notification of input packet rate (in


packet per second) dropping back to
below the configured limit.

juniper dfc
soft pps under
threshold trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-112

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxDfcHardPp 1.3.6.1.4.1.2636.4.11.0.3
sThresholdExc
eeded

Notification of input packet rate (in


packet per second) going beyond the
recommended limit.

juniper dfc
hard pps
threshold
exceeded trap

jnxDfcHardPp 1.3.6.1.4.1.2636.4.11.0.4
sUnderThresh
old

Notification of input packet rate (in


packet per second) dropping back to
below the recommended limit.

juniper dfc
hard pps under
threshold trap

jnxDfcSoftMe 1.3.6.1.4.1.2636.4.11.0.5
mThresholdEx
ceeded

Notification of memory overload


condition i.e memory usage is going
beyond the configured limit.

juniper dfc
soft mem
threshold
exceeded trap

jnxDfcSoftMe 1.3.6.1.4.1.2636.4.11.0.6
mUnderThresh
old

Notification of memory usage dropping


back to below the configured limit.

juniper dfc
soft mem
under
threshold trap

jnxDfcHardM 1.3.6.1.4.1.2636.4.11.0.7
emThresholdE
xceeded

Notification of memory overload


condition i.e memory usage is going
beyond the recommended limit.

juniper dfc
hard mem
threshold
exceeded trap

jnxDfcHardM 1.3.6.1.4.1.2636.4.11.0.8
emUnderThres
hold

Notification of memory usage dropping


back to below the recommended limit.

juniper dfc
hard mem
under
threshold trap

jnxPowerSupp 1.3.6.1.4.1.2636.4.2.1
lyOK

juniper power
jnxPowerSupplyOK trap signifies that
the SNMP entity, acting in an agent role, supply ok trap
has detected that the specified power
supply in the chassis has recovered from
the failure (bad DC output) condition.

jnxFanOK

jnxFanOK trap signifies that the SNMP juniper fan ok


trap
entity, acting in an agent role, has
detected that the specified cooling fan or
impeller in the chassis has recovered
from the failure (not spinning)
condition.

1.3.6.1.4.1.2636.4.2.2

jnxTemperatur 1.3.6.1.4.1.2636.4.2.3
eOK

juniper
jnxTemperatureOK trap signifies that
the SNMP entity, acting in an agent role, temperature
has detected that the specified hardware ok trap
component in the chassis has recovered
from over temperature condition.

jnxRmonAlar
mGetFailure

The SNMP trap that is generated when


the get request for an alarm variable
returns an error. The specific error is
identified by
jnxRmonAlarmGetFailReason.

1.3.6.1.4.1.2636.4.3.0.1

juniper Rmon
alarm get
failure trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-113

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

jnxRmonGetO 1.3.6.1.4.1.2636.4.3.0.2
k

The SNMP trap that is generated when


the get request for an alarm variable is
successful. This is only sent after
previous attempts were unsuccessful.

juniper Rmon
get ok trap

jnxLdpLspUp

1.3.6.1.4.1.2636.4.4.0.1

The SNMP trap that is generated when


an LSP comes up.

juniper Ldp
Lsp Up trap

jnxLdpLspDo
wn

1.3.6.1.4.1.2636.4.4.0.2

The SNMP trap that is generated when


the LSP goes down.

juniper Ldp
Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.1.2636.4.4.0.3

The SNMP trap that is generated when juniper ldp


the value of 'mplsLdpSesState' enters the session up trap
'operational(5) state.

jnxLdpSesDo
wn

1.3.6.1.4.1.2636.4.4.0.4

The SNMP trap that is generated when juniper ldp


the value of 'mplsLdpSesState' leaves the session down
trap
'operational(5) state. The value of
jnxLdpSesDownIf is one of the
neighbor's interface. It is the interface
associated with the last neighbor when
jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.1.2636.4.5.0.1

Notification of a configuration
management event as recorded in
jnxCmCfgChgEventTable.

juniper Cm
cfg change
trap

jnxCmRescue
Change

1.3.6.1.4.1.2636.4.5.0.2

Notification of the latest rescue


configuration change.

juniper Cm
rescue change
trap

jnxSonetAlar
mSet

1.3.6.1.4.1.2636.4.6.0.1

Notification of a recently set


SONET/SDH alarm.

juniper sonet
alarm set trap

jnxSonetAlar
mCleared

1.3.6.1.4.1.2636.4.6.0.2

Notification of a recently cleared


SONET/SDH alarm.

juniper sonet
alarm cleared
trap

jnxPMonOverl 1.3.6.1.4.1.2636.4.7.0.1
oadSet

Notification of a new overload condition juniper PMon


on a Passive Monitoring interface.
overload set
trap

jnxPMonOverl 1.3.6.1.4.1.2636.4.7.0.2
oadCleared

Notification of a cleared overload


condition on a Passive Monitoring
interface.

juniper PMon
overload
cleared trap

jnxCollUnavai 1.3.6.1.4.1.2636.4.8.0.1
lableDest

Notification of an unavailable
destination failure encountered while
transferring a collector file.

juniper coll
unavailable
dest trap

jnxCollUnavai 1.3.6.1.4.1.2636.4.8.0.2
lableDestClear
ed

This indicates a previous unavailable


destination failure has been resolved.

juniper coll
unavailable
dest cleared
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-114

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxCollUnsucc 1.3.6.1.4.1.2636.4.8.0.3
essfulTransfer

This indicates an error was encountered juniper coll


while attempting a file transfer.
unsuccessful
transfer trap

jnxCollFlowO
verload

1.3.6.1.4.1.2636.4.8.0.4

This indicates a soft or hard flow


overload condition has been triggered.

juniper coll
flow overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.1.2636.4.8.0.5

This indicates a soft or hard flow


overload condition has been cleared.

juniper coll
flow overload
cleared trap

jnxCollMemor 1.3.6.1.4.1.2636.4.8.0.6
yUnavailable

This indicates a memory unavailable


condition has been triggered.

juniper coll
memory
unavailable
trap

jnxCollMemor 1.3.6.1.4.1.2636.4.8.0.7
yAvailable

This indicates a memory unavailable


condition has been cleared.

juniper coll
memory
available trap

jnxCollFtpSwi 1.3.6.1.4.1.2636.4.8.0.8
tchover

This indicates an FTP server switchover juniper coll ftp


has occurred.
switch over
trap

jnxPingRttThr 1.3.6.1.4.1.2636.4.9.0.1
esholdExceede
d

This notification is generated when the


round trip time
(jnxPingCtlRttThreshold) exceeds the
configured threshold
(jnxPingCtlRttThreshold) and the
rttThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt threshold
exceeded trap

jnxPingRttStd
DevThreshold
Exceeded

This notification is generated when the


standard deviation of the round trip time
(jnxPingResultsStdDevRttUs) exceeds
the configured threshold
(jnxPingCtlRttStdDevThreshold) and
the rttStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded trap

This notification is generated when the


round trip time jitter
(jnxPingResultsMaxRttUs minus
jnxPingResultsMinRttUs) exceeds the
configured threshold
(jnxPingCtlRttJitterThreshold) and the
rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded trap

1.3.6.1.4.1.2636.4.9.0.2

jnxPingRttJitte 1.3.6.1.4.1.2636.4.9.0.3
rThresholdExc
eeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-115

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Trap Name

Trap OID

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingEgress 1.3.6.1.4.1.2636.4.9.0.4
ThresholdExce
eded

This notification is generated when the


egress time (jnxPingResultsEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressTimeThreshold) and
the egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded trap

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.1.2636.4.9.0.5

This notification is generated when the


standard deviation of the egress time
(jnxPingResultsStddevEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressStdDevThreshold)
and the egressStdDevThreshold bit is set
in jnxPingCtlTrapGeneration.

juniper ping
egress std dev
threshold
exceeded trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.1.2636.4.9.0.6

This notification is generated when the


egress time jitter
(jnxPingResultsMaxEgressUs minus
jnxPingResultsMinEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressJitterThreshold) and
the egressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded trap

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.7
ThresholdExce
eded

This notification is generated when the


ingress time (jnxPingResultsIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressTimeThreshold) and
the ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded trap

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.8
StddevThresho
ldExceeded

This notification is generated when the


standard deviation of the ingress time
(jnxPingResultsStddevIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressStddevThreshold)
and the ingressStdDevThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
ingress std dev
threshold
exceeded trap

jnxPingIngress 1.3.6.1.4.1.2636.4.9.0.9
JitterThreshol
dExceeded

This notification is generated when the


ingress time jitter
(jnxPingResultsMaxIngressUs minus
jnxPingResultsMinIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressJitterThreshold) and
the ingressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-116

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

jnxBgpM2Esta 1.3.6.1.4.1.2636.5.1.1.1.
blished
0.1

The BGP Established event is generated juniper bgp


when the BGP FSM enters the
M2
ESTABLISHED state.
established
trap

jnxBgpM2Bac 1.3.6.1.4.1.2636.5.1.1.1.
kwardTransitio 0.2
n

juniper bgp
The BGPBackwardTransition Event is
M2 backward
generated when the BGP FSM moves
from a higher numbered state to a lower transition trap
numbered state.

coldStart

1.3.6.1.6.3.1.1.5.1

A coldStart trap signifies that the SNMP Juniper Cold


start trap
entity, supporting a notification
originator application, is reinitializing
itself and that its configuration may have
been altered.

warmStart

1.3.6.1.6.3.1.1.5.2

A warmStart trap signifies that the


SNMP entity, supporting a notification
originator application, is reinitializing
itself such that its configuration is
unaltered.

linkDown

1.3.6.1.6.3.1.1.5.3

Juniper Line
A linkDown trap signifies that the
SNMP entity, acting in an agent role, has down trap
detected that the ifOperStatus object for
one of its communication links is about
to enter the down state from some other
state (but not from the notPresent state).
This other state is indicated by the
included value of ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

Juniper Line
A linkUp trap signifies that the SNMP
up trap
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links left the
down state and transitioned into some
other state (but not into the notPresent
state). This other state is indicated by the
included value of ifOperStatus.

authentication
Failure

1.3.6.1.6.3.1.1.5.5

An authenticationFailure trap signifies Juniper SNMP


authentication
that the SNMP entity has received a
failure
protocol message that is not properly
authenticated. While all
implementations of SNMP entities MAY
be capable of generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Juniper Warm
start trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-117

Chapter 10

Traps

Juniper MX-Series V2 Traps

Table 10-17

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Subtype
Varbind
Value

Description

Short
Description

Trap Name

Trap OID

isisdatabaseov
erload

1.3.6.1.2.1.138.0.1

juniper isis
database
overload trap

isisManualAd
dressDrops

1.3.6.1.2.1.138.0.2

juniper isis
manual
address drops
trap

isisCorruptedL 1.3.6.1.2.1.138.0.3
SPDetected

juniper isis
corrupted lsp
detected trap

isisAttemptTo
ExceedMaxSe
quence

1.3.6.1.2.1.138.0.4

juniper isis
attempt to
exceed
maxsequence
trap

isisIDLenMis
match

1.3.6.1.2.1.138.0.5

juniper isis ID
Len mismatch
trap

isisMaxAreaA
ddressesMism
atch

1.3.6.1.2.1.138.0.6

juniper isis
max area
addresses
mismatch trap

isisOwnLSPPu 1.3.6.1.2.1.138.0.7
rge

juniper isis
own lsp purge
trap

isisSequenceN 1.3.6.1.2.1.138.0.8
umberSkip

juniper isis
sequence
number skip
trap

isisAuthenticat 1.3.6.1.2.1.138.0.9
ionTypeFailur
e

juniper isis
authentication
type failure

isisAuthenticat 1.3.6.1.2.1.138.0.10
ionFailure

juniper isis
authentication
Failure

isisVersionSke 1.3.6.1.2.1.138.0.11
w

juniper isis
version skew

isisAreaMisma 1.3.6.1.2.1.138.0.12
tch

juniper isis
area mismatch

isisRejectedAd 1.3.6.1.2.1.138.0.13
jacency

juniper isis
rejected
adjacency

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-118

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V1 Traps

Table 10-17

Trap Name

Juniper MX-Series V2 Traps (Continued)

Subtype
Varbind
OID

Trap OID

Subtype
Varbind
Value

Description

Short
Description

isisLSPTooLar 1.3.6.1.2.1.138.0.14
geToPropagate

juniper isis lsp


too large

isisOrigLSPBu 1.3.6.1.2.1.138.0.15
ffSizeMismatc
h

juniper isis
orig lsp buffer
size mismatch

isisProtocolsS 1.3.6.1.2.1.138.0.16
upportedMism
atch

juniper isis
protocols
supported
mismatch

isisAdjacency
Change

juniper isis
adjacency
change

1.3.6.1.2.1.138.0.17

isisLSPErrorD 1.3.6.1.2.1.138.0.18
etected

juniper isis lsp


error detected

Juniper Netscreen V1 Traps


Table 10-18 lists the Juniper Netscreen V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-45.
Table 10-18

Juniper Netscreen V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

logfull

100

1.3.6.1.4.
1.3224

1.3.6.1.4. 24
1.3224.2.
1

This trap indicates that some kind of logfull


hardware problem has occured

devicedead

100

1.3.6.1.4.
1.3224

1.3.6.1.4. 19
1.3224.2.
1

This trap indicates that some kind of devicedead


hardware problem has occured

genericHWfail 6

100

1.3.6.1.4.
1.3224

1.3.6.1.4. 22
1.3224.2.
1

This trap indicates that some kind of genericHWfai


hardware problem has occured
l

cpuhigh

100

1.3.6.1.4.
1.3224

1.3.6.1.4. 30
1.3224.2.
1

This trap indicates that some kind of cpuhigh


hardware problem has occured

Subtype
Varbind
Value

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-119

Chapter 10

Traps

Juniper Netscreen V1 Traps

Table 10-18

Juniper Netscreen V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

lowmemory

100

1.3.6.1.4.
1.3224

1.3.6.1.4. 20
1.3224.2.
1

This trap indicates that some kind of lowmemory


hardware problem has occured

highavialabilit
y

200

1.3.6.1.4.
1.3224

1.3.6.1.4. 15
1.3224.2.
1

This trap indicates that some kind of highavialabilit


firewall functions has been
y
triggered.

dstipsessionli
mit

200

1.3.6.1.4.
1.3224

1.3.6.1.4. 430
1.3224.2.
1

This trap indicates that some kind of dstipsessionli


firewall functions has been
mit
triggered.

nsrp vsd
master

600

1.3.6.1.4.
1.3224

1.3.6.1.4. 71
1.3224.2.
1

This trap indicates that NSRP status nsrp vsd


has occured.
master

nsrp vsd
backup

600

1.3.6.1.4.
1.3224

1.3.6.1.4. 73
1.3224.2.
1

This trap indicates that NSRP status nsrp vsd


has occured.
backup

nsrp rto up

600

1.3.6.1.4.
1.3224

1.3.6.1.4. 60
1.3224.2.
1

This trap indicates that NSRP status nsrp rto up


has occured.

nsrp rto down

600

1.3.6.1.4.
1.3224

1.3.6.1.4. 61
1.3224.2.
1

This trap indicates that NSRP status nsrp rto down


has occured.

ospfVirtIfState 6
Change

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
interface state
changed to
Down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
down

Subtype
Varbind
Value

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-120

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V1 Traps

Table 10-18

Juniper Netscreen V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
up

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on
a non-virtual interface from a
router whose configuration
parameters conflict with this
router's configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf 6
igError

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfConfigError trap signifies


that a packet has been received on
a virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on
a non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-121

Chapter 10

Traps

Juniper Netscreen V1 Traps

Table 10-18

Juniper Netscreen V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
Juniper OSPF
virtual
interface
authentication
failure

ospfVirtIfAuth 6
Failure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap
signifies that a packet has been
received on a virtual interface from
a router whose authentication key
or authentication type conflicts
with this router's authentication key
or authentication type.

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

Juniper OSPF
An ospfIfRxBadPacket trap
signifies that an OSPF packet has bad packet
received
been received on a non-virtual
interface that cannot be parsed.

ospfVirtIfRxB
adPacket

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

Juniper OSPF
bad packet
received on
virtual
interface

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

11

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies Juniper OSPF


new LSA
that a new LSA has been
originated by this router. This trap originated
should not be invoked for simple
refreshes of LSAs (which happens
every 30 minutes), but instead will
only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

Juniper OSPF
LSA aged to
MaxAge

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-122

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V1 Traps

Table 10-18

Juniper Netscreen V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
Juniper OSPF
interface state
changed to
Down

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies JuniperOSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 1
1.15.3.1.
2

The BGPBackwardTransition Event Juniper BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

newRoot

1.3.6.1.2.
1.17.0

Juniper BGP
established
trap

The newRoot trap indicates that the Juniper new


sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-123

Chapter 10

Traps

Juniper Netscreen V1 Traps

Table 10-18

Juniper Netscreen V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

topologyChan
ge

1.3.6.1.2.
1.17.0

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent
if a newRoot trap is sent for the
same transition. Implementation of
this trap is optional.

Juniper
Spanning Tree
Topology
Changed

entConfigCha
nge

1.3.6.1.2.
1.47.2.0

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

Juniper Entity
table
configuration
changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-124

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V2 Traps

Juniper Netscreen V2 Traps


Table 10-19 lists the Juniper Netscreen V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-46.
Table 10-19

Juniper Netscreen V2 Traps

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

logfull

1.3.6.1.4.1.3224.0.100

1.3.6.1.
4.1.322
4.2.1

24

This trap indicates that some kind of logfull


hardware problem has occured

devicedead

1.3.6.1.4.1.3224.0.100

1.3.6.1.
4.1.322
4.2.1

19

This trap indicates that some kind of devicedead


hardware problem has occured

genericHWfail 1.3.6.1.4.1.3224.0.100

1.3.6.1.
4.1.322
4.2.1

22

This trap indicates that some kind of genericHWfai


hardware problem has occured
l

cpuhigh

1.3.6.1.4.1.3224.0.100

1.3.6.1.
4.1.322
4.2.1

30

This trap indicates that some kind of cpuhigh


hardware problem has occured

lowmemory

1.3.6.1.4.1.3224.0.100

1.3.6.1.
4.1.322
4.2.1

20

This trap indicates that some kind of lowmemory


hardware problem has occured

highavialabilit
y

1.3.6.1.4.1.3224.0.200

1.3.6.1.
4.1.322
4.2.1

15

This trap indicates that some kind of highavialabilit


firewall functions has been
y
triggered.

dstipsessionli
mit

1.3.6.1.4.1.3224.0.200

1.3.6.1.
4.1.322
4.2.1

430

This trap indicates that some kind of dstipsessionli


mit
firewall functions has been
triggered.

nsrp vsd
master

1.3.6.1.4.1.3224.0.600

1.3.6.1.
4.1.322
4.2.1

71

This trap indicates that NSRP status nsrp vsd


has occured.
master

nsrp vsd
backup

1.3.6.1.4.1.3224.0.600

1.3.6.1.
4.1.322
4.2.1

73

This trap indicates that NSRP status nsrp vsd


has occured.
backup

nsrp rto up

1.3.6.1.4.1.3224.0.600

1.3.6.1.
4.1.322
4.2.1

60

This trap indicates that NSRP status nsrp rto up


has occured.

nsrp rto down

1.3.6.1.4.1.3224.0.600

1.3.6.1.
4.1.322
4.2.1

61

This trap indicates that NSRP status nsrp rto down


has occured.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-125

Chapter 10

Traps

Juniper Netscreen V2 Traps

Table 10-19

Trap Name

Juniper Netscreen V2 Traps (Continued)

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description
Juniper OSPF
interface state
changed to
Down

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. = 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. != 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies Juniper OSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfVirtIfState .1.3.6.1.2.1.14.16.2.1
Change

NA

NA

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
interface state
changed to
Down

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. != 8
2.1.14.1
0.1.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
down

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. = 8
2.1.14.1
0.1.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
up

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-126

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V2 Traps

Table 10-19

Juniper Netscreen V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1. != 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1. = 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on
a non-virtual interface from a
router whose configuration
parameters conflict with this
router's configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf .1.3.6.1.2.1.14.16.2.5
igError

NA

NA

An ospfConfigError trap signifies


that a packet has been received on
a virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail .1.3.6.1.2.1.14.16.2.6
ure

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on
a non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

ospfVirtIfAuth .1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

An ospfVirtIfAuthFailure trap
signifies that a packet has been
received on a virtual interface from
a router whose authentication key
or authentication type conflicts
with this router's authentication key
or authentication type.

Juniper OSPF
virtual
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-127

Chapter 10

Traps

Juniper Netscreen V2 Traps

Table 10-19

Juniper Netscreen V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

ospfIfRxBadP
acket

.1.3.6.1.2.1.14.16.2.8

NA

NA

Juniper OSPF
An ospfIfRxBadPacket trap
signifies that an OSPF packet has bad packet
received
been received on a non-virtual
interface that cannot be parsed.

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

Juniper OSPF
bad packet
received on
virtual
interface

ospfTxRetrans .1.3.6.1.2.1.14.16.2.10
mit

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies Juniper OSPF


new LSA
that a new LSA has been
originated by this router. This trap originated
should not be invoked for simple
refreshes of LSAs (which happens
every 30 minutes), but instead will
only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

bgpBackward
Transition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event Juniper BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

bgpEstablishe
d

.1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

Description

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

Short
Description

Juniper OSPF
LSA aged to
MaxAge

Juniper BGP
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-128

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V2 Traps

Table 10-19

Juniper Netscreen V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

newRoot

1.3.6.1.2.1.17.0.1

The newRoot trap indicates that the Juniper new


sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.0.2

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent
if a newRoot trap is sent for the
same transition. Implementation of
this trap is optional.

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-129

Chapter 10

Traps

Juniper Netscreen V2 Traps

Table 10-19

Juniper Netscreen V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

entConfigCha
nge

.1.3.6.1.2.1.47.2.0.1

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

Juniper Entity
table
configuration
changed

coldStart

1.3.6.1.6.3.1.1.5.1

A coldStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself and that its
configuration may have been
altered.

Juniper Cold
start trap

warmStart

1.3.6.1.6.3.1.1.5.2

A warmStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself such that its
configuration is unaltered.

Juniper Warm
start trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-130

OL-24429-01

Chapter 10

Traps
Juniper T-Series V1 Traps

Table 10-19

Juniper Netscreen V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

linkDown

1.3.6.1.6.3.1.1.5.3

Juniper Line
A linkDown trap signifies that the
down trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

Juniper Line
A linkUp trap signifies that the
up trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

authentication
Failure

1.3.6.1.6.3.1.1.5.5

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated. While
all implementations of SNMP
entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Juniper SNMP
authentication
failure

Juniper T-Series V1 Traps


Juniper T-Series V1 traps supported in Cisco ANA is the same as the Juniper M-Series V1 traps. For
more details on the Juniper M-Series V1 traps see Table 10-14.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-131

Chapter 10

Traps

Juniper T-Series V2 Traps

Juniper T-Series V2 Traps


Juniper T-Series V2 traps supported in Cisco ANA is the same as the Juniper M-Series V2 traps. For
more details on the Juniper M-Series V2 traps see Table 10-15.

Juniper JCS-Series V1 Traps


Table 10-20 lists the Juniper JCS-Series V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-47..
Table 10-20

JCS V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtIfState 6
Change

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

Juniper OSPF
virtual
interface state
changed to
Down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

Juniper OSPF
neighbor state
up

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-132

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
down

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

Juniper OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on
a non-virtual interface from a
router whose configuration
parameters conflict with this
router's configuration parameters.

Juniper OSPF
interface
configuration
error

ospfVirtIfConf 6
igError

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfConfigError trap signifies


that a packet has been received on
a virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

Juniper OSPF
virtual
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on
a non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

Juniper OSPF
interface
authentication
failure

ospfVirtIfAuth 6
Failure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap
signifies that a packet has been
received on a virtual interface from
a router whose authentication key
or authentication type conflicts
with this router's authentication key
or authentication type.

Juniper OSPF
virtual
interface
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-133

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

Juniper OSPF
An ospfIfRxBadPacket trap
signifies that an OSPF packet has bad packet
received
been received on a non-virtual
interface that cannot be parsed.

ospfVirtIfRxB
adPacket

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

Juniper OSPF
bad packet
received on
virtual
interface

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

Juniper OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

11

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

Juniper OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies Juniper OSPF


new LSA
that a new LSA has been
originated by this router. This trap originated
should not be invoked for simple
refreshes of LSAs (which happens
every 30 minutes), but instead will
only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

Juniper OSPF
LSA aged to
MaxAge

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

Juniper OSPF
interface state
changed to
Down

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-134

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies Juniper OSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 1
1.15.3.1.
2

The BGPBackwardTransition Event Juniper BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

newRoot

1.3.6.1.2.
1.17.0

The newRoot trap indicates that the Juniper new


sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

topologyChan
ge

1.3.6.1.2.
1.17.0

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent
if a newRoot trap is sent for the
same transition. Implementation of
this trap is optional.

Juniper BGP
established
trap

Juniper
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-135

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
Juniper Entity
table
configuration
changed

entConfigCha
nge

1.3.6.1.2.
1.47.2.0

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

mplsLspUp

1.3.6.1.4.
1.2636.3.2
.4

juniper mpls
An mplsLspUp trap signifies that
the specified LSP is up. The current Lsp Up trap
active path for the LSP is
mplsPathName.

mplsLspDown 6

1.3.6.1.4.
1.2636.3.2
.4

An mplsLspDown trap signifies that juniper mpls


the specified LSP is down, because Lsp Down trap
the current active path
mplsPathName went down.

mplsLspChang 6
e

1.3.6.1.4.
1.2636.3.2
.4

juniper mpls
An mplsLspChange trap signifies
that the specified LSP has switched Lsp Change
trap
traffic to the new active path
'toLspPath'. The LSP maintains up
state before and after the switch over

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-136

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

mplsLspPathD 6
own

1.3.6.1.4.
1.2636.3.2
.4

An mplsLspPathDown trap signifies juniper mpls


lsp path down
that the specified path
trap
mplsPathName for the specified
LSP mplsLspName went down

mplsLspPathU 6
p

1.3.6.1.4.
1.2636.3.2
.4

An mplsLspPathUp trap signifies


that the specified path
mplsPathName for the specified
LSP mplsLspName came up

apsEventSwitc 6
hover

1.3.6.1.4.
1.2636.3.2
4.2.0

An apsEventSwitchover notification juniper aps


is sent when the value of an instance event switch
over trap
of apsChanStatusSwitchovers
increments.

apsEventMode 6
Mismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
An apsEventModeMismatch
notification is sent when the value of event mode
mismatch trap
an instance of
apsStatusModeMismatches
increments.

apsEventChan
nelMismatch

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
An apsEventChannelMismatch
notification is sent when the value of event channel
mismatch trap
an instance of
apsStatusChannelMismatches
increments.

apsEventPSBF 6

1.3.6.1.4.
1.2636.3.2
4.2.0

juniper aps
An apsEventPSBF notification is
sent when the value of an instance of event psbf trap
apsStatusPSBFs increments.

apsEventFEPL 6
F

1.3.6.1.4.
1.2636.3.2
4.2.0

An apsEventFEPLFs notification is juniper aps


sent when the value of an instance of event feplf
trap
apsStatusFEPLFs increments.

jnxVpnIfUp

1.3.6.1.4.
1.2636.3.2
6.0

Juniper VPN
A jnxVpnIfUp notification is
Interface Up
generated when the interface with
index jnxVpnIfIndex belonging to
the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType
transitions out of the 'down' state.

jnxVpnIfDown 6

1.3.6.1.4.
1.2636.3.2
6.0

Juniper VPN
A jnxVpnIfDown notification is
Interface
generated when the interface with
Down
index jnxVpnIfIndex belonging to
the VPN named jnxVpnIfVpnName
of type jnxVpnIfVpnType
transitions to the 'down' state.

juniper mpls
lsp path up
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-137

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxVpnPwUp

1.3.6.1.4.
1.2636.3.2
6.0

A jnxVpnPwUp notification is
generated when the Pseudo-Wire
with index jnxVpnPwIndex
belonging to the VPN named
jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out
of the 'down' state.

juniper vpn
power up trap

jnxVpnPwDo
wn

1.3.6.1.4.
1.2636.3.2
6.0

A jnxVpnPwDown notification is
generated when the Pseudo-Wire
with index jnxVpnPwIndex
belonging to the VPN named
VpnPwVpnName of type
jnxVpnPwVpnType transitions to
the 'down' state.

juniper vpn
power down
trap

jnxPowerSupp 6
lyFailure

1.3.6.1.4.
1.2636.4.1

A jnxFruPowerOff trap signifies


that the SNMP entity, acting in an
agent role, has detected that the
specified FRU (Field Replaceable
Unit) has been powered off in the
chassis.

juniper power
supply failure
Trap

jnxFanFailure

1.3.6.1.4.
1.2636.4.1

A jnxFanFailure trap signifies that juniper fan


the SNMP entity, acting in an agent failure Trap
role, has detected that the specified
cooling fan or impeller in the
chassis has been in the failure (not
spinning) condition.

jnxOverTempe 6
rature

1.3.6.1.4.
1.2636.4.1

juniper over
A jnxOverTemperature trap
temperature
signifies that the SNMP entity,
acting in an agent role, has detected Trap
that the specified hardware
component in the chassis has
experienced over temperature
condition.

jnxRedundanc
ySwitchover

1.3.6.1.4.
1.2636.4.1

A jnxRedundancySwitchover trap
signifies that the SNMP entity,
acting in an agent role, has detected
that the specified hardware
component in the chassis has
experienced a redundancy
switchover event defined as a
change in state of
jnxRedundancyState from master to
backup or vice versa.

Subtype
Varbind
Value

Description

Short
Description

juniper
redundancy
switch over
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-138

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxFruRemova 6
l

1.3.6.1.4.
1.2636.4.1

A jnxFruRemoval trap signifies that Card Out trap


the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been removed from the chassis.

jnxFruInsertio
n

1.3.6.1.4.
1.2636.4.1

A jnxFruInsertion trap signifies that Card In trap


the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been inserted into the chassis.

jnxFruPowerO 6
ff

1.3.6.1.4.
1.2636.4.1

A jnxFruPowerOff trap signifies


that the SNMP entity, acting in an
agent role, has detected that the
specified FRU (Field Replaceable
Unit) has been powered off in the
chassis.

jnxFruPowerO 6
n

1.3.6.1.4.
1.2636.4.1

A jnxFruPowerOn trap signifies that Card Up Trap


the SNMP entity, acting in an agent
role, has detected that the specified
FRU (Field Replaceable Unit) has
been powered on in the chassis.

jnxFruFailed

1.3.6.1.4.
1.2636.4.1

juniper fru
This indicates the specified FRU
(Field Replaceable Unit) has failed failed Trap
in the chassis. Most probably this is
due toi some hard error such as fru is
not powering up or not able to load
ukernel. In these cases, fru is
replaced.

jnxFruOffline

10

1.3.6.1.4.
1.2636.4.1

A jnxFruOffline trap signifies that juniper fru


the SNMP entity, acting in an agent offline Trap
role, has detected that the specified
FRU (Field Replaceable Unit)

jnxFruOnline

11

1.3.6.1.4.
1.2636.4.1

juniper fru
A jnxFruOnline trap signifies that
the SNMP entity, acting in an agent online Trap
role, has detected that the specified
FRU (Field Replaceable Unit) has
gone online in the chassis.

jnxFruCheck

12

1.3.6.1.4.
1.2636.4.1

juniper fru
A jnxFruCheck trap signifies that
the SNMP entity, acting in an agent check Trap
role, has detected that the specified
FRU (Field Replaceable Unit) has
encountered some operational errors
and gone into check state in the
chassis.

Card Down
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-139

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
juniper Sp svc
set zone
entered trap

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service PIC has


entered a more severe
memory-usage zone from a less
severe memory usage zone. The
zone entered is identified by
jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetZ
oneExited

1.3.6.1.4.
1.2636.4.1
0.0

juniper Sp svc
This indicates a Service Pic has
exited a more severe memory-usage set zone exited
zone to a less severe memory usage trap
zone. The zone exited is identified
by jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetC
puExceeded

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


exceeded its internal threshold for
CPU utilization (85%).

juniper Sp svc
set cpu
exceeded trap

jnxSpSvcSetC
puOk

1.3.6.1.4.
1.2636.4.1
0.0

This indicates a Service Pic has


exceeded its internal threshold for
CPU utilization (85%).

juniper Sp svc
set cpu ok trap

jnxDfcSoftPps 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) going beyond the soft pps
threshold
configured limit.
exceeded trap

jnxDfcSoftPps 6
UnderThreshol
d

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) dropping back to soft pps under
threshold trap
below the configured limit.

jnxDfcHardPp 6
sThresholdExc
eeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) going beyond the hard pps
recommended limit.
threshold
exceeded trap

jnxDfcHardPp 6
sUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of input packet rate (in juniper dfc


packet per second) dropping back to hard pps under
below the recommended limit.
threshold trap

jnxDfcSoftMe 6
mThresholdEx
ceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


juniper dfc
condition i.e memory usage is going soft mem
beyond the configured limit.
threshold
exceeded trap

jnxDfcSoftMe 6
mUnderThresh
old

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage


dropping back to below the
configured limit.

jnxDfcHardM 6
emThresholdE
xceeded

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory overload


juniper dfc
condition i.e memory usage is going hard mem
beyond the recommended limit.
threshold
exceeded trap

juniper dfc
soft mem
under
threshold trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-140

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxDfcHardM 6
emUnderThres
hold

1.3.6.1.4.
1.2636.4.1
1.0

Notification of memory usage


dropping back to below the
recommended limit.

juniper dfc
hard mem
under
threshold trap

jnxPowerSupp 6
lyOK

1.3.6.1.4.
1.2636.4.2

A jnxPowerSupplyOK trap signifies juniper power


supply ok trap
that the SNMP entity, acting in an
agent role, has detected that the
specified power supply in the
chassis has recovered from the
failure (bad DC output) condition.

jnxFanOK

1.3.6.1.4.
1.2636.4.2

A jnxFanOK trap signifies that the


SNMP entity, acting in an agent
role, has detected that the specified
cooling fan or impeller in the
chassis has recovered from the
failure (not spinning) condition.

jnxTemperatur 6
eOK

1.3.6.1.4.
1.2636.4.2

A jnxTemperatureOK trap signifies juniper


temperature
that the SNMP entity, acting in an
ok trap
agent role, has detected that the
specified hardware component in
the chassis has recovered from over
temperature condition.

jnxRmonAlar
mGetFailure

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated


when the get request for an alarm
variable returns an error. The
specific error is identified by
jnxRmonAlarmGetFailReason.

juniper Rmon
alarm get
failure trap

jnxRmonGetO 6
k

1.3.6.1.4.
1.2636.4.3
.0

The SNMP trap that is generated


when the get request for an alarm
variable is successful. This is only
sent after previous attempts were
unsuccessful.

juniper Rmon
get ok trap

jnxLdpLspUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


when an LSP comes up.

juniper Ldp
Lsp Up trap

jnxLdpLspDo
wn

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


when the LSP goes down.

juniper Ldp
Lsp Down trap

jnxLdpSesUp

1.3.6.1.4.
1.2636.4.4
.0

The SNMP trap that is generated


juniper ldp
when the value of 'mplsLdpSesState' session up trap
enters the 'operational(5) state.

juniper fan ok
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-141

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxLdpSesDo
wn

1.3.6.1.4.
1.2636.4.4
.0

juniper ldp
The SNMP trap that is generated
when the value of 'mplsLdpSesState' session down
leaves the 'operational(5) state. The trap
value of jnxLdpSesDownIf is one of
the neighbor's interface. It is the
interface associated with the last
neighbor when
jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.
1.2636.4.5
.0

Notification of a configuration
management event as recorded in
jnxCmCfgChgEventTable.

juniper Cm
cfg change
trap

jnxCmRescue
Change

1.3.6.1.4.
1.2636.4.5
.0

Notification of the latest rescue


configuration change.

juniper Cm
rescue change
trap

jnxSonetAlar
mSet

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently set


sonet/sdh alarm.

juniper sonet
alarm set trap

jnxSonetAlar
mCleared

1.3.6.1.4.
1.2636.4.6
.0

Notification of a recently cleared


sonet/sdh alarm.

juniper sonet
alarm cleared
trap

jnxPMonOverl 6
oadSet

1.3.6.1.4.
1.2636.4.7
.0

Notification of a new overload


condition on a Passive Monitoring
interface.

juniper PMon
overload set
trap

jnxPMonOverl 6
oadCleared

1.3.6.1.4.
1.2636.4.7
.0

Notification of a cleared overload


condition on a Passive Monitoring
interface.

juniper PMon
overload
cleared trap

jnxCollUnavai 6
lableDest

1.3.6.1.4.
1.2636.4.8
.0

Notification of an unavailable
destination failure encountered
while transferring a collector file.

juniper coll
unavailable
dest trap

jnxCollUnavai 6
lableDestClear
ed

1.3.6.1.4.
1.2636.4.8
.0

This indicates a previous


unavailable destination failure has
been resolved.

juniper coll
unavailable
dest cleared
trap

jnxCollUnsucc 6
essfulTransfer

1.3.6.1.4.
1.2636.4.8
.0

This indicates an error was


encountered while attempting a file
transfer.

juniper coll
unsuccessful
transfer trap

jnxCollFlowO
verload

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


overload condition has been
triggered.

juniper coll
flow overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.
1.2636.4.8
.0

This indicates a soft or hard flow


juniper coll
overload condition has been cleared. flow overload
cleared trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-142

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxCollMemor 6
yUnavailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable juniper coll


condition has been triggered.
memory
unavailable
trap

jnxCollMemor 6
yAvailable

1.3.6.1.4.
1.2636.4.8
.0

This indicates a memory unavailable juniper coll


condition has been cleared.
memory
available trap

jnxCollFtpSwi 6
tchover

1.3.6.1.4.
1.2636.4.8
.0

This indicates an FTP server


switchover has occurred.

juniper coll ftp


switch over
trap

jnxPingRttThr 6
esholdExceede
d

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the round trip time
(jnxPingCtlRttThreshold) exceeds
the configured threshold
(jnxPingCtlRttThreshold) and the
rttThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt threshold
exceeded trap

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the round
trip time
(jnxPingResultsStdDevRttUs)
exceeds the configured threshold
(jnxPingCtlRttStdDevThreshold)
and the rttStdDevThreshold bit is set
in jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded trap

jnxPingRttJitte 6
rThresholdExc
eeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the round trip time jitter
(jnxPingResultsMaxRttUs minus
jnxPingResultsMinRttUs) exceeds
the configured threshold
(jnxPingCtlRttJitterThreshold) and
the rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded trap

jnxPingEgress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the egress time
(jnxPingResultsEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressTimeThreshold)
and the egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded trap

jnxPingRttStd
DevThreshold
Exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-143

Chapter 10

Traps

Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the egress
time
(jnxPingResultsStddevEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressStdDevThreshold
) and the egressStdDevThreshold bit
is set in jnxPingCtlTrapGeneration.

juniper ping
egress std dev
threshold
exceeded trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the egress time jitter
(jnxPingResultsMaxEgressUs
minus jnxPingResultsMinEgressUs)
exceeds the configured threshold
(jnxPingCtlEgressJitterThreshold)
and the egressJitterThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded trap

jnxPingIngress 6
ThresholdExce
eded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the ingress time
(jnxPingResultsIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressTimeThreshold)
and the ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded trap

jnxPingIngress 6
StddevThresho
ldExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the standard deviation of the ingress
time
(jnxPingResultsStddevIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressStddevThreshold
) and the ingressStdDevThreshold
bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress std dev
threshold
exceeded trap

jnxPingIngress 6
JitterThreshol
dExceeded

1.3.6.1.4.
1.2636.4.9
.0

This notification is generated when


the ingress time jitter
(jnxPingResultsMaxIngressUs
minus
jnxPingResultsMinIngressUs)
exceeds the configured threshold
(jnxPingCtlIngressJitterThreshold)
and the ingressJitterThreshold bit is
set in jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded trap

jnxBgpM2Esta 6
blished

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

juniper bgp
M2
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-144

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

jnxBgpM2Bac 6
kwardTransitio
n

Subtype
Varbind
Value

Description

Short
Description

1.3.6.1.4.
1.2636.5.1
.1.1.0

The BGPBackwardTransition Event juniper bgp


M2 backward
is generated when the BGP FSM
moves from a higher numbered state transition trap
to a lower numbered state.

coldStart

1.3.6.1.6.
3.1.1.5

A coldStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself and that its
configuration may have been
altered.

Juniper Cold
start trap

warmStart

1.3.6.1.6.
3.1.1.5

A warmStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself such that its
configuration is unaltered.

Juniper Warm
start trap

linkDown

1.3.6.1.6.
3.1.1.5

Juniper Line
A linkDown trap signifies that the
down trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

linkUp

1.3.6.1.6.
3.1.1.5

Juniper Line
A linkUp trap signifies that the
up trap
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.

authentication
Failure

1.3.6.1.6.
3.1.1.5

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated. While
all implementations of SNMP
entities MAY be capable of
generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.

Juniper SNMP
authentication
failure

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-145

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-20

JCS V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospf-lsdb-appr 6
oaching-overfl
ow

16

1.3.6.1.2.
1.14.16.2.
15

ospf lsdb approaching overflow trap Juniper OSPF


lsdb
approaching
overflow trap

ospf-lsdb-over 6
flow

14

1.3.6.1.2.
1.14.16.2.
14

ospf lsdb overflow trap

Juniper OSPF
lsdb
approaching
overflow trap

tcp connection 6
table

1.3.6.1.2.
1.6.13.1

tcp connection table2 trap - DUMP

Juniper TCP
connection
table trap

Juniper JCS-Series V2 Traps


Table 10-21 lists the Juniper JCS-Series V2 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-47.

Table 10-21

JCS V2 Traps

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

ospfIfStateCha .1.3.6.1.2.1.14 1.3.6.1.2.1.14.7.


nge
.16.2.16
1.12

=1

An ospfIfStateChange trap signifies that there


has been a change in the state of a
non-virtualOSPF interface. This trap should
be generated when the interface state
regresses (e.g., goes from Dr to Down) or
progresses to a terminal state (i.e.,
Point-to-Point, DR Other, Dr, or Backup)

Juniper
OSPF
interface
state
changed to
Down

ospfIfStateCha .1.3.6.1.2.1.14 1.3.6.1.2.1.14.7.


nge
.16.2.16
1.12

!= 1

An ospfIfStateChange trap signifies that there


has been a change in the state of a
non-virtualOSPF interface. This trap should
be generated when the interface state
regresses (e.g., goes from Dr to Down) or
progresses to a terminal state (i.e.,
Point-to-Point, DR Other, Dr, or Backup)

Juniper
OSPF
interface
state
changed to
Up

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-146

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

NA

An ospfIfStateChange trap signifies that there


has been a change in the state of an OSPF
virtual interface. This trap should be generated
when the inter-face state regresses (e.g.,
goes from Point-to-Point to Down) or
progresses to a terminal state (i.e.,
Point-to-Point).

Juniper
OSPF
virtual
interface
state
changed to
Down

ospfNbrStateC .1.3.6.1.2.1.14 1.3.6.1.2.1.14.10 != 8


hange
.16.2.2
.1.6

An ospfNbrStateChange trap signifies that


there has been a change in the state of a
non-virtual OSPF neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full to
1-Way or Down) or progresses to a terminal
state (e.g., 2-Way or Full).

Juniper
OSPF
neighbor
state down

ospfNbrStateC .1.3.6.1.2.1.14 1.3.6.1.2.1.14.10 = 8


hange
.16.2.2
.1.6

An ospfNbrStateChange trap signifies that


there has been a change in the state of a
non-virtual OSPF neighbor. This trap should
be generated when the neighbor state
regresses (e.g., goes from Attempt or Full to
1-Way or Down) or progresses to a terminal
state (e.g., 2-Way or Full).

Juniper
OSPF
neighbor
state up

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14 1.3.6.1.2.1.14.11 != 8
.16.2.3
.1.5

An ospfIfStateChange trap signifies that there


has been a change in the state of an OSPF
virtual neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
Full).

Juniper
OSPF
virtual
neighbor
state down

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14 1.3.6.1.2.1.14.11 = 8
.16.2.3
.1.5

An ospfIfStateChange trap signifies that there


has been a change in the state of an OSPF
virtual neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
Full).

Juniper
OSPF
virtual
neighbor
state up

ospfIfConfigE
rror

.1.3.6.1.2.1.14 NA
.16.2.4

An ospfIfConfigError trap signifies that a


packet has been received on a non-virtual
interface from a router whose configuration
parameters conflict with this router's
configuration parameters.

Juniper
OSPF
interface
configuratio
n error

ospfVirtIfState .1.3.6.1.2.1.14 NA
Change
.16.2.1

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-147

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtIfConf .1.3.6.1.2.1.14 NA
igError
.16.2.5

NA

An ospfConfigError trap signifies that a packet


has been received on a virtual interface from
a router whose configuration parameters
conflict with this router's configuration
parameters.

Juniper
OSPF
virtual
interface
configuratio
n error

ospfIfAuthFail .1.3.6.1.2.1.14 NA
ure
.16.2.6

NA

An ospfIfAuthFailure trap signifies that a


packet has been received on a non-virtual
interface from a router whose authentication
key or authentication type conflicts with this
router's authentication key or authentication
type.

Juniper
OSPF
interface
authenticati
on failure

ospfVirtIfAuth .1.3.6.1.2.1.14 NA
Failure
.16.2.7

NA

An ospfVirtIfAuthFailure trap signifies that a


packet has been received on a virtual interface
from a router whose authentication key or
authentication type conflicts with this router's
authentication key or authentication type.

Juniper
OSPF
virtual
interface
authenticati
on failure

ospfIfRxBadP
acket

.1.3.6.1.2.1.14 NA
.16.2.8

NA

An ospfIfRxBadPacket trap signifies that an Juniper


OSPF bad
OSPF packet has been received on a
non-virtual interface that cannot be parsed.
packet
received

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14 NA
.16.2.9

NA

An ospfRxBadPacket trap signifies that an


OSPF packet has been received on a virtual
interface that cannot be parsed.

ospfTxRetrans .1.3.6.1.2.1.14 NA
mit
.16.2.10

NA

An ospfTxRetransmit trap signifies than an Juniper


OSPF packet has been retransmitted on a
OSPF
non-virtual interface.
packet
retransmitte
d

ospfVirtIfTxR
etransmit

NA

An ospfTxRetransmit trap signifies than an Juniper


OSPF packet has been retransmitted on a
OSPF
virtual interface.
packet
retransmitte
d on virtual
interface

.1.3.6.1.2.1.14 NA
.16.2.11

Juniper
OSPF bad
packet
received on
virtual
interface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-148

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

ospfOriginate
Lsa

.1.3.6.1.2.1.14 NA
.16.2.12

NA

An ospfOriginateLsa trap signifies that a new


LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happens every 30 minutes),
but instead will only be invoked when an
LSA is (re)originated due to a topology
change.

ospfMaxAgeL
sa

.1.3.6.1.2.1.14 NA
.16.2.13

NA

An ospfMaxAgeLsa trap signifies that one of Juniper


the LSA in the router's link-state database has OSPF LSA
aged to MaxAge.
aged to
MaxAge

bgpBackward
Transition

.1.3.6.1.2.1.15 NA
.7.2

NA

The BGPBackwardTransition Event is


generated when the BGP FSM moves from a
higher numbered state to a lower numbered
state.

bgpEstablishe
d

.1.3.6.1.2.1.15 1.3.6.1.2.1.15.3.
.7.1
1.2

=6

The BGP Established event is generated when Juniper BGP


the BGP FSM enters the ESTABLISHED state. down trap

newRoot

1.3.6.1.2.1.17.
0.1

Juniper new
The newRoot trap indicates that the sending
agent has become the new root of the Spanning root trap
Tree; the trap is sent by a bridge soon after its
election as the new root, e.g., upon expiration
of the Topology Change Timer, immediately
subsequent to its election. Implementation of
this trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.
0.2

A topologyChange trap is sent by a bridge


when any of its configured ports transitions
from the Learning state to the Forwarding
state, or from the Forwarding state to the
Blocking state. The trap is not sent if a
newRoot trap is sent for the same transition.
Implementation of this trap is optional.

Subtype
Varbind
Value

Description

Short
Description
Juniper
OSPF new
LSA
originated

Juniper BGP
established
trap

Juniper
Spanning
Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-149

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

entConfigCha
nge

mplsLspUp

Subtype
Varbind
Value

Description
An entConfigChange notification is generated
when the value of entLastChangeTime
changes. It can be utilized by an NMS to
trigger logical/physical entity table
maintenance polls.
An agent should not generate more than one
entConfigChange 'notification-event' in a
given time interval (five seconds is the
suggested default). A 'notification-event' is the
transmission of a single trap or inform PDU to
a list of notification destinations.
If additional configuration changes occur
within the throttling period, then
notification-events for these changes should be
suppressed by the agent until the current
throttling period expires. At the end of a
throttling period, one notification-event should
be generated if any configuration changes
occurred since the start of the throttling period.
In such a case, another throttling period is
started right away.
An NMS should periodically check the value
of entLastChangeTime to detect any missed
entConfigChange notification-events, e.g., due
to throttling or transmission loss.

1.3.6.1.4.1.26
36.3.2.4.1

Short
Description
Juniper
Entity table
configuratio
n changed

An mplsLspUp trap signifies that the specified juniper mpls


LSP is up. The current active path for the LSP Lsp Up trap
is mplsPathName.

mplsLspDown 1.3.6.1.4.1.26
36.3.2.4.2

An mplsLspDown trap signifies that the


specified LSP is down, because the current
active path mplsPathName went down.

juniper mpls
Lsp Down
trap

mplsLspChang 1.3.6.1.4.1.26
e
36.3.2.4.3

juniper mpls
An mplsLspChange trap signifies that the
specified LSP has switched traffic to the new Lsp Change
active path 'toLspPath'. The LSP maintains up trap
state before and after the switch over

mplsLspPathD 1.3.6.1.4.1.26
own
36.3.2.4.4

An mplsLspPathDown trap signifies that the


juniper mpls
specified path mplsPathName for the specified lsp path
LSP mplsLspName went down
down trap

mplsLspPathU 1.3.6.1.4.1.26
p
36.3.2.4.5

An mplsLspPathUp trap signifies that the


juniper mpls
specified path mplsPathName for the specified lsp path up
LSP mplsLspName came up
trap

apsEventSwitc 1.3.6.1.4.1.26
hover
36.3.24.2.0.1

An apsEventSwitchover notification is sent


when the value of an instance of
apsChanStatusSwitchovers increments.

juniper aps
event switch
over trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-150

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

apsEventMode 1.3.6.1.4.1.26
Mismatch
36.3.24.2.0.2

An apsEventModeMismatch notification is
sent when the value of an instance of
apsStatusModeMismatches increments.

juniper aps
event mode
mismatch
trap

apsEventChan
nelMismatch

An apsEventChannelMismatch notification is
sent when the value of an instance of
apsStatusChannelMismatches increments.

juniper aps
event
channel
mismatch
trap

apsEventPSBF 1.3.6.1.4.1.26
36.3.24.2.0.4

An apsEventPSBF notification is sent when


the value of an instance of apsStatusPSBFs
increments.

juniper aps
event psbf
trap

apsEventFEPL 1.3.6.1.4.1.26
F
36.3.24.2.0.5

An apsEventFEPLFs notification is sent when juniper aps


the value of an instance of apsStatusFEPLFs
event feplf
increments.
trap

jnxVpnIfUp

A jnxVpnIfUp notification is generated when Juniper


VPN
the interface with index jnxVpnIfIndex
Interface Up
belonging to the VPN named
jnxVpnIfVpnName of type jnxVpnIfVpnType
transitions out of the 'down' state.

1.3.6.1.4.1.26
36.3.24.2.0.3

1.3.6.1.4.1.26
36.3.26.0.1

Juniper
VPN
Interface
Down

jnxVpnIfDown 1.3.6.1.4.1.26
36.3.26.0.2

A jnxVpnIfDown notification is generated


when the interface with index jnxVpnIfIndex
belonging to the VPN named
jnxVpnIfVpnName of type jnxVpnIfVpnType
transitions to the 'down' state.

jnxVpnPwUp

1.3.6.1.4.1.26
36.3.26.0.3

A jnxVpnPwUp notification is generated when juniper vpn


the Pseudo-Wire with index jnxVpnPwIndex power up
trap
belonging to the VPN named
jnxVpnPwVpnName of type
jnxVpnPwVpnType transitions out of the
'down' state.

jnxVpnPwDo
wn

1.3.6.1.4.1.26
36.3.26.0.4

juniper vpn
A jnxVpnPwDown notification is generated
power down
when the Pseudo-Wire with index
jnxVpnPwIndex belonging to the VPN named trap
VpnPwVpnName of type jnxVpnPwVpnType
transitions to the 'down' state.
juniper
power
supply
failure Trap

jnxPowerSupp 1.3.6.1.4.1.26
lyFailure
36.4.1.1

A jnxFruPowerOff trap signifies that the


SNMP entity, acting in an agent role, has
detected that the specified FRU (Field
Replaceable Unit) has been powered off in the
chassis.

jnxFruOffline

A jnxFruOffline trap signifies that the SNMP juniper fru


entity, acting in an agent role, has detected that offline Trap
the specified FRU (Field Replaceable Unit)

1.3.6.1.4.1.26
36.4.1.10

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-151

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

jnxFruOnline

1.3.6.1.4.1.26
36.4.1.11

A jnxFruOnline trap signifies that the SNMP juniper fru


entity, acting in an agent role, has detected that online Trap
the specified FRU (Field Replaceable Unit)
has gone online in the chassis.

jnxFruCheck

1.3.6.1.4.1.26
36.4.1.12

juniper fru
A jnxFruCheck trap signifies that the SNMP
entity, acting in an agent role, has detected that check Trap
the specified FRU (Field Replaceable Unit)
has encountered some operational errors and
gone into check state in the chassis.

jnxFanFailure

1.3.6.1.4.1.26
36.4.1.2

A jnxFanFailure trap signifies that the SNMP juniper fan


entity, acting in an agent role, has detected that failure Trap
the specified cooling fan or impeller in the
chassis has been in the failure (not spinning)
condition.

jnxOverTempe 1.3.6.1.4.1.26
rature
36.4.1.3

A jnxOverTemperature trap signifies that the juniper over


temperature
SNMP entity, acting in an agent role, has
Trap
detected that the specified hardware
component in the chassis has experienced over
temperature condition.

jnxRedundanc
ySwitchover

A jnxRedundancySwitchover trap signifies


that the SNMP entity, acting in an agent role,
has detected that the specified hardware
component in the chassis has experienced a
redundancy switchover event defined as a
change in state of jnxRedundancyState from
master to backup or vice versa.

1.3.6.1.4.1.26
36.4.1.4

juniper
redundancy
switch over
Trap

jnxFruRemova 1.3.6.1.4.1.26
l
36.4.1.5

A jnxFruRemoval trap signifies that the SNMP juniper fru


entity, acting in an agent role, has detected that removal
Trap
the specified FRU (Field Replaceable Unit)
has been removed from the chassis.

jnxFruInsertio
n

A jnxFruInsertion trap signifies that the SNMP juniper fru


entity, acting in an agent role, has detected that insertion
Trap
the specified FRU (Field Replaceable Unit)
has been inserted into the chassis.

1.3.6.1.4.1.26
36.4.1.6

jnxFruPowerO 1.3.6.1.4.1.26
ff
36.4.1.7

Card Down
A jnxFruPowerOff trap signifies that the
Trap
SNMP entity, acting in an agent role, has
detected that the specified FRU (Field
Replaceable Unit) has been powered off in the
chassis.

jnxFruPowerO 1.3.6.1.4.1.26
n
36.4.1.8

Card Up
A jnxFruPowerOn trap signifies that the
Trap
SNMP entity, acting in an agent role, has
detected that the specified FRU (Field
Replaceable Unit) has been powered on in the
chassis.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-152

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description
juniper fru
failed Trap

jnxFruFailed

1.3.6.1.4.1.26
36.4.1.9

This indicates the specified FRU (Field


Replaceable Unit) has failed in the chassis.
Most probably this is due toi some hard error
such as fru is not powering up or not able to
load ukernel. In these cases, fru is replaced.

jnxSpSvcSetZ
oneEntered

1.3.6.1.4.1.26
36.4.10.0.1

juniper Sp
This indicates a Service PIC has entered a
svc set zone
more severe memory-usage zone from a less
severe memory usage zone. The zone entered entered trap
is identified by jnxSpSvcSetIfMemoryZone.

jnxSpSvcSetZ
oneExited

1.3.6.1.4.1.26
36.4.10.0.2

This indicates a Service Pic has exited a more


severe memory-usage zone to a less severe
memory usage zone. The zone exited is
identified by jnxSpSvcSetIfMemoryZone.

juniper Sp
svc set zone
exited trap

jnxSpSvcSetC
puExceeded

1.3.6.1.4.1.26
36.4.10.0.3

This indicates a Service Pic has exceeded its


internal threshold for CPU utilization (85%).

juniper Sp
svc set cpu
exceeded
trap

jnxSpSvcSetC
puOk

1.3.6.1.4.1.26
36.4.10.0.4

This indicates a Service Pic has exceeded its


internal threshold for CPU utilization (85%).

juniper Sp
svc set cpu
ok trap

jnxDfcSoftPps 1.3.6.1.4.1.26
ThresholdExce 36.4.11.0.1
eded

Notification of input packet rate (in packet per juniper dfc


second) going beyond the configured limit.
soft pps
threshold
exceeded
trap

jnxDfcSoftPps 1.3.6.1.4.1.26
UnderThreshol 36.4.11.0.2
d

Notification of input packet rate (in packet per juniper dfc


second) dropping back to below the configured soft pps
under
limit.
threshold
trap

jnxDfcHardPp 1.3.6.1.4.1.26
sThresholdExc 36.4.11.0.3
eeded

Notification of input packet rate (in packet per juniper dfc


second) going beyond the recommended limit. hard pps
threshold
exceeded
trap

jnxDfcHardPp 1.3.6.1.4.1.26
sUnderThresh 36.4.11.0.4
old

Notification of input packet rate (in packet per juniper dfc


second) dropping back to below the
hard pps
recommended limit.
under
threshold
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-153

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

jnxDfcSoftMe 1.3.6.1.4.1.26
mThresholdEx 36.4.11.0.5
ceeded

Notification of memory overload condition i.e juniper dfc


memory usage is going beyond the configured soft mem
limit.
threshold
exceeded
trap

jnxDfcSoftMe 1.3.6.1.4.1.26
mUnderThresh 36.4.11.0.6
old

Notification of memory usage dropping back


to below the configured limit.

jnxDfcHardM 1.3.6.1.4.1.26
emThresholdE 36.4.11.0.7
xceeded

Notification of memory overload condition i.e juniper dfc


memory usage is going beyond the
hard mem
recommended limit.
threshold
exceeded
trap

jnxDfcHardM 1.3.6.1.4.1.26
emUnderThres 36.4.11.0.8
hold

Notification of memory usage dropping back


to below the recommended limit.

juniper dfc
hard mem
under
threshold
trap

jnxPowerSupp 1.3.6.1.4.1.26
lyOK
36.4.2.1

A jnxPowerSupplyOK trap signifies that the


SNMP entity, acting in an agent role, has
detected that the specified power supply in the
chassis has recovered from the failure (bad DC
output) condition.

juniper
power
supply ok
trap

jnxFanOK

juniper fan
A jnxFanOK trap signifies that the SNMP
entity, acting in an agent role, has detected that ok trap
the specified cooling fan or impeller in the
chassis has recovered from the failure (not
spinning) condition.

1.3.6.1.4.1.26
36.4.2.2

juniper dfc
soft mem
under
threshold
trap

jnxTemperatur 1.3.6.1.4.1.26
eOK
36.4.2.3

A jnxTemperatureOK trap signifies that the


SNMP entity, acting in an agent role, has
detected that the specified hardware
component in the chassis has recovered from
over temperature condition.

juniper
temperature
ok trap

jnxRmonAlar
mGetFailure

The SNMP trap that is generated when the get


request for an alarm variable returns an error.
The specific error is identified by
jnxRmonAlarmGetFailReason.

juniper
Rmon alarm
get failure
trap

1.3.6.1.4.1.26
36.4.3.0.1

jnxRmonGetO 1.3.6.1.4.1.26
k
36.4.3.0.2

The SNMP trap that is generated when the get juniper


Rmon get ok
request for an alarm variable is successful.
This is only sent after previous attempts were trap
unsuccessful.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-154

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

jnxLdpLspUp

1.3.6.1.4.1.26
36.4.4.0.1

The SNMP trap that is generated when an LSP juniper Ldp


comes up.
Lsp Up trap

jnxLdpLspDo
wn

1.3.6.1.4.1.26
36.4.4.0.2

The SNMP trap that is generated when the LSP juniper Ldp
goes down.
Lsp Down
trap

jnxLdpSesUp

1.3.6.1.4.1.26
36.4.4.0.3

The SNMP trap that is generated when the


value of 'mplsLdpSesState' enters the
'operational(5) state.

jnxLdpSesDo
wn

1.3.6.1.4.1.26
36.4.4.0.4

juniper ldp
The SNMP trap that is generated when the
session
value of 'mplsLdpSesState' leaves the
down trap
'operational(5) state. The value of
jnxLdpSesDownIf is one of the neighbor's
interface. It is the interface associated with the
last neighbor when jnxLdpSesDownReason is
allAdjacenciesDown (3).

jnxCmCfgCha
nge

1.3.6.1.4.1.26
36.4.5.0.1

Notification of a configuration management


event as recorded in
jnxCmCfgChgEventTable.

juniper Cm
cfg change
trap

jnxCmRescue
Change

1.3.6.1.4.1.26
36.4.5.0.2

Notification of the latest rescue configuration


change.

juniper Cm
rescue
change trap

jnxSonetAlar
mSet

1.3.6.1.4.1.26
36.4.6.0.1

Notification of a recently set sonet/sdh alarm. juniper


sonet alarm
set trap

jnxSonetAlar
mCleared

1.3.6.1.4.1.26
36.4.6.0.2

Notification of a recently cleared sonet/sdh


alarm.

juniper
sonet alarm
cleared trap

jnxPMonOverl 1.3.6.1.4.1.26
oadSet
36.4.7.0.1

Notification of a new overload condition on a


Passive Monitoring interface.

juniper
PMon
overload set
trap

jnxPMonOverl 1.3.6.1.4.1.26
oadCleared
36.4.7.0.2

Notification of a cleared overload condition on juniper


a Passive Monitoring interface.
PMon
overload
cleared trap

jnxCollUnavai 1.3.6.1.4.1.26
lableDest
36.4.8.0.1

Notification of an unavailable destination


failure encountered while transferring a
collector file.

juniper coll
unavailable
dest trap

jnxCollUnavai 1.3.6.1.4.1.26
lableDestClear 36.4.8.0.2
ed

This indicates a previous unavailable


destination failure has been resolved.

juniper coll
unavailable
dest cleared
trap

juniper ldp
session up
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-155

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

jnxCollUnsucc 1.3.6.1.4.1.26
essfulTransfer 36.4.8.0.3

This indicates an error was encountered while juniper coll


attempting a file transfer.
unsuccessfu
l transfer
trap

jnxCollFlowO
verload

1.3.6.1.4.1.26
36.4.8.0.4

This indicates a soft or hard flow overload


condition has been triggered.

juniper coll
flow
overload
trap

jnxCollFlowO
verloadCleare
d

1.3.6.1.4.1.26
36.4.8.0.5

This indicates a soft or hard flow overload


condition has been cleared.

juniper coll
flow
overload
cleared trap

jnxCollMemor 1.3.6.1.4.1.26
yUnavailable
36.4.8.0.6

This indicates a memory unavailable condition juniper coll


has been triggered.
memory
unavailable
trap

jnxCollMemor 1.3.6.1.4.1.26
yAvailable
36.4.8.0.7

This indicates a memory unavailable condition juniper coll


has been cleared.
memory
available
trap

jnxCollFtpSwi 1.3.6.1.4.1.26
tchover
36.4.8.0.8

This indicates an FTP server switchover has


occurred.

juniper coll
ftp switch
over trap

jnxPingRttThr 1.3.6.1.4.1.26
esholdExceede 36.4.9.0.1
d

This notification is generated when the round


trip time (jnxPingCtlRttThreshold) exceeds
the configured threshold
(jnxPingCtlRttThreshold) and the rttThreshold
bit is set in jnxPingCtlTrapGeneration.

juniper ping
rtt threshold
exceeded
trap

jnxPingRttStd
DevThreshold
Exceeded

This notification is generated when the


standard deviation of the round trip time
(jnxPingResultsStdDevRttUs) exceeds the
configured threshold
(jnxPingCtlRttStdDevThreshold) and the
rttStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt std dev
threshold
exceeded
trap

This notification is generated when the round


trip time jitter (jnxPingResultsMaxRttUs
minus jnxPingResultsMinRttUs) exceeds the
configured threshold
(jnxPingCtlRttJitterThreshold) and the
rttJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
rtt jitter
threshold
exceeded
trap

1.3.6.1.4.1.26
36.4.9.0.2

jnxPingRttJitte 1.3.6.1.4.1.26
rThresholdExc 36.4.9.0.3
eeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-156

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

jnxPingEgress 1.3.6.1.4.1.26
ThresholdExce 36.4.9.0.4
eded

This notification is generated when the egress


time (jnxPingResultsEgressUs) exceeds the
configured threshold
(jnxPingCtlEgressTimeThreshold) and the
egressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress
threshold
exceeded
trap

jnxPingEgress
StdDevThresh
oldExceeded

1.3.6.1.4.1.26
36.4.9.0.5

This notification is generated when the


standard deviation of the egress time
(jnxPingResultsStddevEgressUs) exceeds the
configured threshold
(jnxPingCtlEgressStdDevThreshold) and the
egressStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress std
dev
threshold
exceeded
trap

jnxPingEgress
JitterThreshol
dExceeded

1.3.6.1.4.1.26
36.4.9.0.6

This notification is generated when the egress


time jitter (jnxPingResultsMaxEgressUs
minus jnxPingResultsMinEgressUs) exceeds
the configured threshold
(jnxPingCtlEgressJitterThreshold) and the
egressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
egress jitter
threshold
exceeded
trap

jnxPingIngress 1.3.6.1.4.1.26
ThresholdExce 36.4.9.0.7
eded

This notification is generated when the ingress


time (jnxPingResultsIngressUs) exceeds the
configured threshold
(jnxPingCtlIngressTimeThreshold) and the
ingressThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress
threshold
exceeded
trap

jnxPingIngress 1.3.6.1.4.1.26
StddevThresho 36.4.9.0.8
ldExceeded

This notification is generated when the


standard deviation of the ingress time
(jnxPingResultsStddevIngressUs) exceeds the
configured threshold
(jnxPingCtlIngressStddevThreshold) and the
ingressStdDevThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress std
dev
threshold
exceeded
trap

jnxPingIngress 1.3.6.1.4.1.26
JitterThreshol 36.4.9.0.9
dExceeded

This notification is generated when the ingress


time jitter (jnxPingResultsMaxIngressUs
minus jnxPingResultsMinIngressUs) exceeds
the configured threshold
(jnxPingCtlIngressJitterThreshold) and the
ingressJitterThreshold bit is set in
jnxPingCtlTrapGeneration.

juniper ping
ingress jitter
threshold
exceeded
trap

jnxBgpM2Esta 1.3.6.1.4.1.26
blished
36.5.1.1.1.0.1

The BGP Established event is generated when juniper bgp


the BGP FSM enters the ESTABLISHED state. M2
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-157

Chapter 10

Traps

Juniper JCS-Series V2 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description
juniper bgp
M2
backward
transition
trap

jnxBgpM2Bac 1.3.6.1.4.1.26
kwardTransitio 36.5.1.1.1.0.2
n

The BGPBackwardTransition Event is


generated when the BGP FSM moves from a
higher numbered state to a lower numbered
state.

coldStart

1.3.6.1.6.3.1.1
.5.1

A coldStart trap signifies that the SNMP entity, Juniper


Cold start
supporting a notification originator
application, is reinitializing itself and that its trap
configuration may have been altered.

warmStart

1.3.6.1.6.3.1.1
.5.2

Juniper
A warmStart trap signifies that the SNMP
Warm start
entity, supporting a notification originator
application, is reinitializing itself such that its trap
configuration is unaltered.

linkDown

1.3.6.1.6.3.1.1
.5.3

Juniper Line
A linkDown trap signifies that the SNMP
entity, acting in an agent role, has detected that down trap
the ifOperStatus object for one of its
communication links is about to enter the
down state from some other state (but not from
the notPresent state). This other state is
indicated by the included value of
ifOperStatus.

linkUp

1.3.6.1.6.3.1.1
.5.4

A linkUp trap signifies that the SNMP entity, Juniper Line


up trap
acting in an agent role, has detected that the
ifOperStatus object for one of its
communication links left the down state and
transitioned into some other state (but not into
the notPresent state). This other state is
indicated by the included value of
ifOperStatus.

authentication
Failure

1.3.6.1.6.3.1.1
.5.5

An authenticationFailure trap signifies that the


SNMP entity has received a protocol message
that is not properly authenticated. While all
implementations of SNMP entities MAY be
capable of generating this trap, the
snmpEnableAuthenTraps object indicates
whether this trap will be generated.

Juniper
SNMP
authenticati
on failure

ospf lsdb approaching overflow trap

Juniper
OSPF lsdb
approaching
overflow
trap

ospf-lsdb-appr 1.3.6.1.2.1.14.
oaching-overfl 16.2.15
ow

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-158

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps

Table 10-21

JCS V2 Traps (Continued)

Trap Name

Subtype Varbind
Enterprise OID OID

Subtype
Varbind
Value

Description

Short
Description

ospf-lsdb-over 1.3.6.1.2.1.14.
flow
16.2.14

ospf lsdb overflow trap

Juniper
OSPF lsdb
approaching
overflow
trap

tcp connection 1.3.6.1.2.1.6.1


table
3.1

tcp connection table2 trap - DUMP

Juniper TCP
connection
table trap

RAD ACE V1 Traps


Table 10-22 lists the RAD ACE V1 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-49.
Table 10-22

RAD ACE V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

coldStart

1.3.6.1.6.
3.1.1.5.1

NA

NA

rad Cold start


A coldStart trap signifies that the
trap
SNMP entity, supporting a
notification originator application is
reinitializing itself and that its
configuration may have been
altered.

linkDown

1.3.6.1.6.
3.1.1.5

NA

NA

A linkDown trap signifies that the


SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Description

Short
Description

rad link down


trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-159

Chapter 10

Traps

RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

linkUp

1.3.6.1.6.
3.1.1.5

NA

NA

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible normal
for changed to Normal Severity

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.2

1.3.6.1.4. 2,4,6
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
minor
for changed to Minor,event and
warning severities

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.3

1.3.6.1.4. 1,5,7
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
major
for changed to Major and critical
severities

tftpStatusChan 6
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2,3,4,5,6 This trap is sent whenever the status tftp Status
1.164.6.2 ,7
of tftp changed.
Change Trap
.12.6

authentication
Failure

1.3.6.1.6.
3.1.1.5.5

NA

agnFanFailure
Trap

14

1.3.6.1.4.
1.164.6.1

agnFanFailure
Trap

14

licenseUpdate
Trap

agnClkSrcStat
eChangeTrap

Description
A linkUp trap signifies that the
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Short
Description
rad link up
trap

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated

rad
authentication
failure v1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon fan failure

agent Fan
Failure Trap
On

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon fan recovery

agent Fan
Failiure Trap
Off

27

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is sent whenever a license


is successfully downloaded or
whenever a license's demo duration
is expired.

license update
trap

28

1.3.6.1.4.
1.164.6.1

NA

NA

The trap is sent upon change in


Recovery Clock State.

agent clksrc
state change
trap

agnClkSrcFreq 6
uencyAlarmTr
ap

31

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

The trap is sent upon Recovered


Clock Frequency alarm On

agent ClkSrc
Frequency
AlarmTrap On

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-160

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

agnClkSrcFreq 6
uencyAlarmTr
ap

31

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

The trap is sent upon Recovered


Clock Frequency alarm Off

agnUploadDat
aTrap

11

1.3.6.1.4.
1.164.6.1

NA

This trap is sent upon an upload data agent upload


session termination
data trap

agnSelfTestRe 6
sultChangeTra
p

29

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

The trap is sent upon each change in agent self test


the result to Failed of a Self State
result failed
operation.

agnSelfTestRe 6
sultChangeTra
p

29

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

The trap is sent upon each change in agent self test


the result to passed of a Self State
result passed
operation.

prtStatusChan
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. SFP
1.164.6.2 Un-plug
ged
.11.1.2

This trap is sent whenever the state


of a ethernet port changed to
Un-plugged.

prt Status
Un-plugged

prtStatusChan
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. SFP
1.164.6.2 Plugged
.11.1.2

This trap is sent whenever the state


of a ethernet port changed to
Plugged.

This trap is
sent whenever
the state of a
ethernet port
changed to
Plugged.

atmAceAlarm
LOS

16

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss Of Signal


Alarm On.

atm AceAlarm
LOS On

atmAceAlarm
LOS

16

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Loss Of Signal


Alarm Off.

atm AceAlarm
LOS Off

atmAceAlarm
LOF

17

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss Of Frame


Alarm On.

atm AceAlarm
LOF On

atmAceAlarm
LOF

17

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss Of Frame


Alarm Off.

atm AceAlarm
LOF Off

atmAceAlarm
LCD

18

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss of Cell


Delineation Alarm On.

atm AceAlarm
LCD On

atmAceAlarm
LCD

18

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss of Cell


Delineation Alarm Off.

atm AceAlarm
LCD Off

atmAceAlarm
LineAIS

21

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line AIS Alarm


On.

atm AceAlarm
LineAIS On

NA

agent ClkSrc
Frequency
AlarmTrap
Off

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-161

Chapter 10

Traps

RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description
atm AceAlarm
LineAIS Off

atmAceAlarm
LineAIS

21

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line AIS Alarm


Off.

atmAceAlarm
LineRDI

23

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line RDI Alarm atm AceAlarm


On
LineRDI On

atmAceAlarm
LineRDI

23

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line RDI Alarm atm AceAlarm


On
LineRDI Off

atmAceAlarm
LineFEBE

28

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line Far End


Block Error Alarm On

atm AceAlarm
LineFEBE On

atmAceAlarm
LineFEBE

28

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Line Far End


Block Error Alarm Off

atm AceAlarm
LineFEBE Off

atmAceAlarm 6
VpAISRecepti
on

41

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates VPAIS


Reception Alarm On

atm AceAlarm
VpAIS
Reception On

atmAceAlarm 6
VpAISRecepti
on

41

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates VPAIS


Reception Alarm Off

atm AceAlarm
VpAIS
Reception Off

atmAceAlarm 6
VcAISRecepti
on

57

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
.21
12

This trap indicates VCAIS


Reception on.

atm AceAlarm
VcAIS
Reception On

atmAceAlarm 6
VcAISRecepti
on

57

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates VCAIS


Reception off.

atm AceAlarm
VcAIS
Reception Off

atmAceAlarm 6
VpRDIRecepti
on

42

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates VPRDI


Reception on

atm AceAlarm
VcAIS
Reception On

atmAceAlarm 6
VpRDIRecepti
on

42

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates VPRDI


Reception off.

atm AceAlarm
VcAIS
Reception Off

atmAceAlarm 6
VcRDIRecepti
on

58

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates VC RDI


Reception on.

atm AceAlarm
VcRDI
Reception On

atmAceAlarm 6
VcRDIRecepti
on

58

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates VC RDI


Reception off.

atm AceAlarm
VcRDI
Reception Off

atmAceAlarm
VpContinuity
Loss

40

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss of


Continuity Check on a VP
Connection.

atm AceAlarm
VpContinuity
Loss On

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-162

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

atmAceAlarm
VpContinuity
Loss

Subtype
Varbind
Value

Description

Short
Description

40

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Continuity on a


VP Connection.

atm AceAlarm
VpContinuity
Loss Off

atmAceAlarm 6
VcContinuityL
oss

56

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss of


Continuity Check on a VC
Connection.

atm AceAlarm
VcContinuity
Loss On

atmAceAlarm 6
VcContinuityL
oss

56

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Continuity on a


VC Connection.

atm AceAlarm
VcContinuity
Loss Off

atmAceAlarm
VpLoopback

47

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap is sent upon OAM


LoopBack fail status per VP.

atm AceAlarm
VpLoopback
On

atmAceAlarm
VpLoopback

47

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap is sent upon OAM


atm AceAlarm
LoopBack fail status per VP cleared VpLoopback
event.
Off

atmAceAlarm
VcLoopback

64

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
.21
12

This trap is sent upon OAM


LoopBack fail status per VC.

atmAceAlarm
VcLoopback

64

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

atm AceAlarm
This trap is sent upon OAM
LoopBack fail status per VC cleared VcLoopback
event.
Off

atmImaGroup
StatusChange
Trap

80

1.3.6.1.4. NA
1.164.6.1.
12

This trap indicates IMA Group


status change.

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon power failure. agent Power


Failure

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon power


Recovery.

agent Power
Failure
recovery

mplsLdpSessi
onUp

1.3.6.1.2. NA
1.10.166.4

NA

This notification is sent when the


value of 'mplsLdpSessionState'
enters the 'operational' state.

rad MPLS
LDP session
up Trap

mplsLdpSessi
onDown

1.3.6.1.2. NA
1.10.166.4

NA

This notification is sent when the


value of 'mplsLdpSessionState'
leaves the 'operational' state.

rad MPLS
LDP session
down Trap

bfdSessUp

1.3.6.1.4. NA
1.164.20.1
5

NA

This notification is generated when


the bfdSessState object for one or
more contiguous entries in
bfdSessTable are about to enter the
up state from some other state.

bfd Session
Up

NA

atm AceAlarm
VcLoopback
On

atmIma
GroupStatus
ChangeTrap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-163

Chapter 10

Traps

RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

bfdSessDown

1.3.6.1.4. NA
1.164.20.1
5

NA

This notification is generated when


the bfdSessState object for one or
more contiguous entries in
bfdSessTable are about to enter the
down or adminDown states from
some other state.

pwUp

1.3.6.1.4. NA
1.164.20.1
0

NA

This notification is generated when Pseudo wire


the pwOperStatus object for one or tunnel up
more contiguous entries in pwTable
are about to enter the up state from
some other state.

pwDown

1.3.6.1.4. NA
1.164.20.1
0

NA

This notification is generated when Pseudo wire


the pwOperStatus object for one or tunnel down
more contiguous entries in pwTable
are about to enter the down state
from some other state.

adslAturRateC 6
hangeTrap

1.3.6.1.2. NA
1.10.94.1.
2.2

NA

The ATURs transmit rate has


changed trap.

adslAturRate
Change Trap

atmAceAlarm
SLM

19

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Signal Line


Mismatch Alarm Off.

atm AceAlarm
SLM Off

atmAceAlarm
SLM

19

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Signal Line


Mismatch Alarm On.

atm AceAlarm
SLM On

atmAceAlarm
LOP

20

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Loss of Pointer


Alarm Off.

atm AceAlarm
LOP Off

atmAceAlarm
LOP

20

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Loss of Pointer


Alarm On.

atm AceAlarm
LOP On

atmAceAlarm
PathAIS

22

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Path AIS Alarm


Off.

atm AceAlarm
PathAIS Off

atmAceAlarm
PathAIS

22

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Path AIS Alarm


On.

atm AceAlarm
PathAIS On

atmAceAlarm
PathRDI

24

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Path RDIand


Path RAI(Yellow) for DS1
interfaces Alarm Off.

atm AceAlarm
PathRDI Off

atmAceAlarm
PathRDI

24

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Path RDIand


Path RAI(Yellow) for DS1
interfaces Alarm On.

atm AceAlarm
PathRDI On

Description

Short
Description
bfd Session
Down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-164

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

atmAceAlarm
SectionBIP

25

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Section Bit


Interleave Parity Alarm Off.

atm AceAlarm
SectionBIP
Off

atmAceAlarm
SectionBIP

25

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Section Bit


Interleave Parity Alarm On.

atm AceAlarm
SectionBIP
On

atmAceAlarm
LineBIP

26

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line Bit


Interleave Parity Alarm Off.

atm AceAlarm
LineBIP Off

atmAceAlarm
LineBIP

26

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
12
.21

This trap indicates Line Bit


Interleave Parity Alarm On.

atm AceAlarm
LineBIP On

atmAceAlarm
PathBIP

27

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Path Bit


Interleave Parity Alarm Off.

atm AceAlarm
PathBIP Off

atmAceAlarm
PathBIP

27

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Path Bit


Interleave Parity Alarm On.

atm AceAlarm
PathBIP On

atmAceAlarm
PathFEBE

29

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Path Far End


Block Error Alarm Off.

atm AceAlarm
PathFEBE Off

atmAceAlarm
PathFEBE

29

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.1. 1.164.6.2
.21
12

This trap indicates Path Far End


Block Error Alarm On.

atm AceAlarm
PathFEBE On

agnStationClk
FailureTrap

23

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon Station Clock agent Station


failure
Clock Failure

agnStationClk
FailureTrap

23

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon Station Clock agent Station


failure recovery
Clock Failure
recovery

agnCurrClkSta 6
teChangeTrap

30

1.3.6.1.4.
1.164.6.1

NA

The trap is sent upon change in


Current Clock State.

dot3OamOper
StatusChange

1.3.6.1.4. 1.3.6.1.2. 1,2,3,4,5 This trap is sent when OAM EFM


1.164.3.1. 1.158.1.1 ,6,7,8,9, Link goes Up or Down.
6.1.6
.1.2
10

dot3Oam Oper
Status Change
Trap

dot3OamPeer
Event

1.3.6.1.4. NA
1.164.3.1.
6.1.6

dot3Oam Peer
Event Trap

NA

NA

This trap is sent when value of


dot3OamXPeerState changes from
any value to one of the following
values: linkFault, dyingGasp,
criticalEvent.This trap has no
recovery (clearing value).

agent Current
Clock State
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-165

Chapter 10

Traps

RAD ETX 204A V1 Traps

Table 10-22

RAD ACE V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

hardSyncTrap

hardSyncTrap

Subtype
Varbind
Value

Description

Short
Description

1.3.6.1.4. 1.3.6.1.4. 2
1.164.6.2. 1.164.6.2
61.2
.61.1.1

This trap is sent whenever Hard


Synchronization process starts

hard Sync
Start

1.3.6.1.4. 1.3.6.1.4. 3
1.164.6.2. 1.164.6.2
61.2
.61.1.1

This trap is sent whenever Hard


Synchronization process ends

hard Sync End

RAD ETX 204A V1 Traps


Table 10-23 lists the RAD ETX 204A V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-42.
Table 10-23

RAD ETX 204A V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

coldStart

1.3.6.1.6.
3.1.1.5.1

NA

NA

rad Cold start


A coldStart trap signifies that the
trap
SNMP entity, supporting a
notification originator application is
reinitializing itself and that its
configuration may have been
altered.

linkDown

1.3.6.1.6.
3.1.1.5

NA

NA

A linkDown trap signifies that the


SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Description

Short
Description

rad link down


trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-166

OL-24429-01

Chapter 10

Traps
RAD ETX 204A V1 Traps

Table 10-23

RAD ETX 204A V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

linkUp

1.3.6.1.6.
3.1.1.5

NA

NA

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible normal
for changed to Normal Severity

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.2

1.3.6.1.4. 2,4,6
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
minor
for changed to Minor, event and
warning severities.

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.3

1.3.6.1.4. 1,5,7
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
major
for changed to Major and critical
severities.

tftpStatusChan 6
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2,3,4,5,6 This trap is sent whenever the status tftp Status
1.164.6.2 ,7
of tftp changed.
Change Trap
.12.6

authentication
Failure

1.3.6.1.6.
3.1.1.5.5

NA

prtStatusChan
geTrap

1.3.6.1.4.
1.164.6.1

prtStatusChan
geTrap

agnUploadDat
aTrap

agnFanFailure
Trap
agnFanFailure
Trap

Description
A linkUp trap signifies that the
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Short
Description
rad link up
trap

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated

rad
authentication
failure v1

1.3.6.1.4. SFP
1.164.6.2 Un-plug
.11.1.2
ged

This trap is sent whenever the state


of a ethernet port changed to
Un-plugged.

prt Status
Un-plugged

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. SFP
1.164.6.2 Plugged
.11.1.2

This trap is sent whenever the state


of a ethernet port changed to
Plugged.

prt Status
plugged

11

1.3.6.1.4.
1.164.6.1

NA

This trap is sent upon an upload data agent upload


session termination.
data trap

14

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon fan failure.

agent Fan
Failure Trap
On

14

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon fan recovery.

agent Fan
Failiure Trap
Off

NA

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-167

Chapter 10

Traps

RAD ETX 204A V1 Traps

Table 10-23

RAD ETX 204A V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon power failure. agent Power


Failure

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon power


Recovery.

risingAlarm

1.3.6.1.2.
1.16

NA

NA

rad rising
The SNMP trap that is generated
Alarm Trap
when an alarm entry crosses its
rising threshold and generates an
event that is configured for sending
SNMP traps.

fallingAlarm

1.3.6.1.2.
1.16

NA

NA

rad falling
The SNMP trap that is generated
Alarm Trap
when an alarm entry crosses its
falling threshold and generates an
event that is configured for sending
SNMP traps.

agnDyingGasp 6
Trap

36

1.3.6.1.4.
1.164.6.1

NA

NA

The trap is sent upon Dying Gasp


alarm.

dot3OamOper
StatusChange

1.3.6.1.4. 1.3.6.1.2. 1,2,3,4,5 This trap is sent when OAM EFM


1.164.3.1. 1.158.1.1 ,6,7,8,9, Link goes Up or Down.
.1.2
10
6.1.6

dot3Oam Oper
Status Change
Trap

dot3OamPeer
Event

1.3.6.1.4. NA
1.164.3.1.
6.1.6

NA

This trap is sent when value of


dot3OamXPeerState changes from
any value to one of the following
values: linkFault, dyingGasp,
criticalEvent.This trap has no
recovery (clearing value).

dot3Oam Peer
Event Trap

agnTempThres 6
holdTrap

37

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is sent upon temperature


threshold.

agn Temp
Threshold
Trap

csmDomainSt
ateChange

33

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is sent when


csmDomainSysSourceId or
csmDomainSysSourceState values
have changed.

csm Domain
State Change
Trap

csmDomainSt
ationStateCha
nge

34

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.52.5.1.1.
14

This trap is sent when


csmDomainStationOutSourceState
value has changed.Applicable only
when device contains station clock
connector.

csm Domain
Station State
Change Trap
locked

csmDomainSt
ationStateCha
nge

34

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.52.5.1.1.
14

This trap is sent when


csmDomainStationOutSourceState
value has changed.Applicable only
when device contains station clock
connector.

csm Domain
Station State
Change Trap
unlocked

agent Power
Failure
recovery

agent Dying
Gasp Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-168

OL-24429-01

Chapter 10

Traps
RAD ETX 204A V1 Traps

Table 10-23

RAD ETX 204A V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

1.3.6.1.4. 1,2,3,4
1.164.6.2
.52.5.2.1.
11

Description

Short
Description

This trap is sent when


csmSourceStatus value has
changed.

csm Source
Status Change
Trap

csmSourceStat 6
usChange

35

1.3.6.1.4.
1.164.6.1

ethOamCfmDe 6
fectCondition

1.3.6.1.4. 1.3.6.1.4. 1,2,3,4,5 This trap indicates that a MEP has a


persistent defect condition.
1.164.3.1. 1.164.3.1 ,6,7,8
6.1.3
.6.1.3.10.
1.1

successfulLogi 6
n

24

1.3.6.1.4.
1.164.6.1

NA

NA

successful
This trap is sent when a user
Login Trap
performed successful Login via
Terminal/Telnet/Web. This trap is
used when the device is located at
End-User's premises while
management is at Service Provider's
premises.

failedLogin

25

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is sent when a user tried to failed Login


Login via Terminal/Telnet/Web and Trap
failed. This trap is used when the
device is located at End-User's
premises while management is at
Service Provider's premises

eth OamCfm
Defect
Condition
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-169

Chapter 10

Traps

RAD IPmux-4L V1 Traps

RAD IPmux-4L V1 Traps


Table 10-24 lists the RAD IPmux-4L V1 traps supported in Cisco ANA. For associated event types,
event subtypes, and Cisco ANA registry parameters, use the link under Short Description or see
Table 10-42.
Table 10-24

RAD IPmux-4L V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

coldStart

1.3.6.1.6.
3.1.1.5.1

NA

NA

rad Cold start


A coldStart trap signifies that the
trap
SNMP entity, supporting a
notification originator application is
reinitializing itself and that its
configuration may have been
altered.

linkDown

1.3.6.1.6.
3.1.1.5

NA

NA

A linkDown trap signifies that the


SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

rad link down


trap

linkUp

1.3.6.1.6.
3.1.1.5

NA

NA

A linkUp trap signifies that the


SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

rad link up
trap

tftpStatusChan 6
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2,3,4,5,6 This trap is sent whenever the status tftp Status
1.164.6.2 ,7
of tftp changed.
Change Trap
.12.6

authentication
Failure

1.3.6.1.6.
3.1.1.5.5

NA

NA

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated

rad
authentication
failure v1

warmStart

1.3.6.1.6.
3.1.1.5.2

NA

NA

A warmStart trap signifies that the


SNMP entity, supporting a
notification originator application,
is reinitializing itself such that its
configuration is unaltered

rad warm start


v1

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-170

OL-24429-01

Chapter 10

Traps
RAD LA-210 V1 Traps

Table 10-24

RAD IPmux-4L V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

dacsMuxAlar
msTrap

Subtype
Varbind
Value

1.3.6.1.4. 5
1.164.3.3
.1.5.1.1.3

Description

Short
Description

This trap is sent when an alarm


occurs

dacs Mux
Alarms Trap

1.3.6.1.4.
1.164.3.3

bundleConnect 6
ionStatusTrap

15

1.3.6.1.4. 1.3.6.1.2. 2
1.164.6.1. 1.2.2.1.8
3

This trap is sent upon any change in bundle


the connectivity status of a Bundle Connection
(ip2IfOperStatus).The ifAlias index Status Down
is the ifIndex of the bundle that its
status has been changed.

bundleConnect 6
ionStatusTrap

15

1.3.6.1.4. 1.3.6.1.2. 1
1.164.6.1. 1.2.2.1.8
3

This trap is sent upon any change in bundle


the connectivity status of a Bundle Connection
(ip2IfOperStatus).The ifAlias index Status Up
is the ifIndex of the bundle that its
status has been changed.

RAD LA-210 V1 Traps


Table 10-25 lists the RAD LA-210 V1 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-52.
Table 10-25

RAD LA-210 V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

coldStart

1.3.6.1.6.
3.1.1.5.1

NA

NA

rad Cold start


A coldStart trap signifies that the
trap
SNMP entity, supporting a
notification originator application is
reinitializing itself and that its
configuration may have been
altered.

linkDown

1.3.6.1.6.
3.1.1.5

NA

NA

A linkDown trap signifies that the


SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links is about to
enter the down state from some
other state (but not from the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

Description

Short
Description

rad link down


trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-171

Chapter 10

Traps

RAD LA-210 V1 Traps

Table 10-25

RAD LA-210 V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

linkUp

1.3.6.1.6.
3.1.1.5

NA

NA

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible normal
for changed to Normal Severity

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.2

1.3.6.1.4. 2,4,6
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
minor
for changed to Minor, event and
warning severities

agnStatusChan 6
ge Trap

1.3.6.1.4.
1.164.6.3

1.3.6.1.4. 1,5,7
1.164.6.2
.8

This trap is sent whenever the state Agent status


of the entity the agent is responsible change trap
major
for changed to Major and critical
severities

tftpStatusChan 6
geTrap

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2,3,4,5,6 This trap is sent whenever the status tftp Status
1.164.6.2 ,7
of tftp changed.
Change Trap
.12.6

authentication
Failure

1.3.6.1.6.
3.1.1.5.5

NA

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 3
1.164.6.2
.21

This trap is sent upon power failure agent Power


Failure

agnPowerFailu 6
reTrap

13

1.3.6.1.4.
1.164.6.1

1.3.6.1.4. 2
1.164.6.2
.21

This trap is sent upon power


Recovery

agnUploadDat
aTrap

11

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is sent upon an upload data agent upload


session termination
data trap

risingAlarm

1.3.6.1.2.
1.16

NA

NA

rad rising
The SNMP trap that is generated
Alarm Trap
when an alarm entry crosses its
rising threshold and generates an
event that is configured for sending
SNMP traps.

NA

Description
A linkUp trap signifies that the
SNMP entity, acting in an agent
role, has detected that the
ifOperStatus object for one of its
communication links left the down
state and transitioned into some
other state (but not into the
notPresent state).This other state is
indicated by the included value of
ifOperStatus.

An authenticationFailure trap
signifies that the SNMP entity has
received a protocol message that is
not properly authenticated

Short
Description
rad link up
trap

rad
authentication
failure v1

agent Power
Failure
recovery

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-172

OL-24429-01

Chapter 10

Traps
RAD LA-210 V1 Traps

Table 10-25

RAD LA-210 V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

fallingAlarm

1.3.6.1.2.
1.16

NA

NA

rad falling
The SNMP trap that is generated
Alarm Trap
when an alarm entry crosses its
falling threshold and generates an
event that is configured for sending
SNMP traps.

hdsl2ShdslLoo 6
pAttenCrossin
g

1.3.6.1.2.
1.10.48

NA

NA

This notification indicates that the


loop attenuation threshold (as per
the
dsl2ShdslEndpointThreshLoopAtte
nuation value) has been
reached/exceeded for the
HDSL2/SHDSL segment endpoint.

hdsl2ShdslSN 6
RMarginCross
ing

1.3.6.1.2.
1.10.48

NA

NA

This notification indicates that the rad hdsl2Shdsl


SNR Margin
SNR margin threshold (as per the
hdsl2ShdslEndpointThreshSNRMar Crossing Trap
gin value) has been
reached/exceeded for the
HDSL2/SHDSL segment endpoint.

enrollmentTra
p

12

1.3.6.1.4.
1.164.6.1

NA

NA

This trap is a periodically trap,


which sent to manager until Agent
get any response (Get or Set) from
this manager.

1.3.6.1.4. NA
1.164.3.1.
6.1.3

NA

This trap indicates that a MEP has a eth OamCfm


persistent defect condition.
Defect
Condition
Trap

ethOamCfmDe 6
fectCondition

Description

Short
Description

rad hdsl2Shdsl
Loop Atten
Crossing Trap

enrollment
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-173

Chapter 10

Traps

Tellabs V1 Traps

Tellabs V1 Traps
Table 10-26 lists the Tellabs V1 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-53.
Table 10-26

Tellabs V1 Traps

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtIfState 6
Change

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

tellabs OSPF
virtual
interface state
changed to
Down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

tellabs OSPF
neighbor state
down

ospfNbrStateC 6
hange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.10.1
.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

tellabs OSPF
neighbor state
up

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

tellabs OSPF
virtual
neighbor state
down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-174

OL-24429-01

Chapter 10

Traps
Tellabs V1 Traps

Table 10-26

Tellabs V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfVirtNbrSt
ateChange

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 8
1.14.11.1
.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

tellabs OSPF
virtual
neighbor state
up

ospfIfConfigE
rror

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfConfigError trap signifies


that a packet has been received on
a non-virtual interface from a
router whose configuration
parameters conflict with this
router's configuration parameters.

tellabs OSPF
interface
configuration
error

ospfVirtIfConf 6
igError

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfConfigError trap signifies


that a packet has been received on
a virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

tellabs OSPF
virtual
interface
configuration
error

ospfIfAuthFail 6
ure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfIfAuthFailure trap signifies


that a packet has been received on
a non-virtual interface from a router
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

tellabs OSPF
interface
authentication
failure

ospfVirtIfAuth 6
Failure

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfVirtIfAuthFailure trap
signifies that a packet has been
received on a virtual interface from
a router whose authentication key
or authentication type conflicts
with this router's authentication key
or authentication type.

tellabs OSPF
virtual
interface
authentication
failure

ospfIfRxBadP
acket

1.3.6.1.2.
1.14.16.2

NA

NA

tellabs OSPF
An ospfIfRxBadPacket trap
signifies that an OSPF packet has bad packet
received
been received on a non-virtual
interface that cannot be parsed.

ospfVirtIfRxB
adPacket

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

tellabs OSPF
bad packet
received on
virtual
interface

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-175

Chapter 10

Traps

Tellabs V1 Traps

Table 10-26

Tellabs V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

ospfTxRetrans 6
mit

10

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

tellabs OSPF
packet
retransmitted

ospfVirtIfTxR
etransmit

11

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

tellabs OSPF
packet
retransmitted
on virtual
interface

ospfOriginate
Lsa

12

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfOriginateLsa trap signifies tellabs OSPF


new LSA
that a new LSA has been
originated by this router. This trap originated
should not be invoked for simple
refreshes of LSAs (which happens
every 30 minutes), but instead will
only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

13

1.3.6.1.2.
1.14.16.2

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

tellabs OSPF
LSA aged to
MaxAge

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. = 1
1.14.7.1.
12

An ospfIfStateChange trap signifies


that there has been a change in the
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

tellabs OSPF
interface state
changed to
Down

ospfIfStateCha 6
nge

16

1.3.6.1.2.
1.14.16.2

1.3.6.1.2. != 1
1.14.7.1.
12

An ospfIfStateChange trap signifies tellabs OSPF


that there has been a change in the interface state
changed to Up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

bgpEstablishe
d

1,2-6

1.3.6.1.2.
1.15.7

1.3.6.1.2. 6
1.15.3.1.
2

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

tellabs BGP
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-176

OL-24429-01

Chapter 10

Traps
Tellabs V1 Traps

Table 10-26

Tellabs V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

bgpBackward
Transition

1,2-6

1.3.6.1.2.
1.15.7

newRoot

1.3.6.1.2.
1.17.0

Subtype
Varbind
Value

1.3.6.1.2. 1
1.15.3.1.
2

Description

Short
Description

The BGPBackwardTransition Event tellabs BGP


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.
The newRoot trap indicates that the tellabs new
sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-177

Chapter 10

Traps

Tellabs V1 Traps

Table 10-26

Tellabs V1 Traps (Continued)

Trap Name

Subtype
Generic Specific Enterprise Varbind
Type
Type
OID
OID

Subtype
Varbind
Value

Description

Short
Description

topologyChan
ge

1.3.6.1.2.
1.17.0

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent
if a newRoot trap is sent for the
same transition. Implementation of
this trap is optional.

tellabs
Spanning Tree
Topology
Changed

entConfigCha
nge

1.3.6.1.2.
1.47.2.0

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

tellabs Entity
table
configuration
changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-178

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Tellabs V2 Traps
Table 10-27 lists the Tellabs V2 traps supported in Cisco ANA. For associated event types, event
subtypes, and Cisco ANA registry parameters, use the link under Short Description or see Table 10-54.
Table 10-27

Tellabs V2 Traps

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

switchoverDb
ChangeV2Tra
p

1.3.6.1.4.1.4641.6.2.102

NA

NA

This event is set when control of the switchover


DbChange
node changes from one CPU to
Trap
another. It is cleared when the
switchover is complete

nodeSwVerSw 1.3.6.1.4.1.4641.6.2.111
itchDbChange
V2Trap

NA

NA

This event is triggered when the


partition validation on the active
switch card fails causing the node to
be restarted.

nodeSwitchFa 1.3.6.1.4.1.4641.6.2.112
bDegradeV2Tr
ap

NA

NA

This event is triggered when the


node Switch
switch fabric enters a degraded state FabDegrade
trap

nodeUpgradeE 1.3.6.1.4.1.4641.6.2.116
ndDbChangeV
2Trap

NA

NA

node Upgrade
This event indicates that a node
upgrade has finished MIB Objects: End Db
Change Trap
nodeSwOperationInProgress

actSysClkCha
ngeV2Trap

1.3.6.1.4.1.4641.6.2.203

NA

NA

This event is triggered when the


system clock source changes. MIB
Objects:
sysClockCurrentClockSource,
sysClockCurrentRevertMode,sysCl
ockCurrentRevertSec

node Upgrade
End
DbChange
trap

sysClkFailedV 1.3.6.1.4.1.4641.6.2.204
2Trap

NA

NA

This event is set when the system


clock has switched to an internal
clock and is cleared when the
system clock is no longer using the
internal clock.

sysClk Failed
Trap

tempExceeded 1.3.6.1.4.1.4641.6.2.205
V2Trap

NA

NA

This event is triggered when a


temperature threshold is exceeded.
It is cleared when the temperature
falls below the threshold

temp
Exceeded
Trap

i2cFailureV2T 1.3.6.1.4.1.4641.6.2.215
rap

NA

NA

This event is set when an I2C failure i2c Failure


is detected. It is cleared when the
Trap
I2C failure has been resolved.

mgmtIpUpV2
Trap

1.3.6.1.4.1.4641.6.2.217

NA

NA

This event is triggered when the


mgmtIp Up
management IP interface comes up. Trap

ntpAdminCha
ngeDbChange
V2Trap_enabl
ed ( 1 )

1.3.6.1.4.1.4641.6.2.219

NA

NA

This event is triggered when NTP


administrative state is changed

Description

Short
Description

node Sw Ver
Switch
DbChange
Trap

ntpAdminCha
ngeDbChange
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-179

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

panelUnplugg
edV2Trap

1.3.6.1.4.1.4641.6.2.233

NA

NA

This event is set when the system


panel
panel is unplugged. It is cleared
Unplugged
when the system panel is plugged in. Trap

fanFailV2Trap 1.3.6.1.4.1.4641.6.2.350

NA

NA

This event is set when a fan failure is fan Fail Trap


detected. It is cleared when the fan
becomes operational.

fanUnplugV2T 1.3.6.1.4.1.4641.6.2.351
rap

NA

NA

This event is set when a fan is


unplugged. It is cleared when the
fan becomes becomes operational

powerOutageV 1.3.6.1.4.1.4641.6.2.376
2Trap

NA

NA

This event is set when a shelf power power Outage


Trap
outage has occurred. An outage
occurs when both A and B power
sources to a single feed have no
power. It is cleared when one of the
two sources is restored.

powerFailureV 1.3.6.1.4.1.4641.6.2.388
2Trap

NA

NA

This event is set when a shelf power power Failure


Trap
failure has been detected. This
failure occurs if one of two power
sources to a single power feed has
failed. It is cleared when the failed
source is restored or a power outage
is asserted.

cardInsertedV
2Trap

1.3.6.1.4.1.4641.6.2.502

NA

NA

This event is trigged when a card is card inserted


inserted
trap

cardRemoved
V2Trap

1.3.6.1.4.1.4641.6.2.503

NA

NA

This event is trigged when a card is card Removed


removed
Trap

cardAdminStC 1.3.6.1.4.1.4641.6.2.504
hangedV2Trap
_enabled ( 1 )

NA

NA

This event is trigged when a card's


administrative state is changed

card
AdminStChan
ged Trap

cardMismatch
edV2Trap

1.3.6.1.4.1.4641.6.2.505

NA

NA

This event is trigged when a card


type nismatch is detected

card
Mismatched
Trap

cardOnLineV2 1.3.6.1.4.1.4641.6.2.506
Trap

NA

NA

This event is trigged when a card


operational state changes to UP

card online
trap

cardFailedV2T 1.3.6.1.4.1.4641.6.2.507
rap

NA

NA

This event is set when a card failure card Failed


Trap
is detected.It is cleared when the
card is removed or the fault is
cleared.

cardSwVerMis 1.3.6.1.4.1.4641.6.2.509
matchedV2Tra
p

NA

NA

card SwVer
This event is set when a software
Mismatched
version mismatch is detected. It is
cleared when a correct version of the Trap
software is loaded.

Description

Short
Description

fan Unplug
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-180

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

enabledCardR
emovedV2Tra
p

1.3.6.1.4.1.4641.6.2.511

NA

cardOffLineV
2Trap

1.3.6.1.4.1.4641.6.2.516

Description

Short
Description

NA

This event is trigged when a card


which was enabled is removed

enabled Card
Removed Trap

NA

NA

This event is triggered when a card card OffLine


operational state changes to DOWN Trap

cardTxClkFail 1.3.6.1.4.1.4641.6.2.518
V2Trap

NA

NA

This event is triggered when a line card TxClk


card's Tx clock has failed forcing it Fail Trap
to use the non-active SC reference
clock.

sCardRefClkF
ailV2Trap

1.3.6.1.4.1.4641.6.2.519

NA

NA

This event is triggered when all


operational line card's have
determined that the active SC has a
bad reference clock.

sCardRefClkD 1.3.6.1.4.1.4641.6.2.520
ifV2Trap

NA

NA

sCard RefClk
This event is triggered when the
standby SC has a different reference Dif Trap
clock than the active SC

enabledCardR
esetV2Trap

1.3.6.1.4.1.4641.6.2.521

NA

NA

This event is triggered when a card


which was enabled is reset

enabled Card
Reset Trap

cardTempExce 1.3.6.1.4.1.4641.6.2.522
ededV2Trap

NA

NA

This event is triggered when a


temperature threshold is exceeded
on a card.

card Temp
Exceeded
Trap

cardInvalidBo
otOrderV2Tra
p

1.3.6.1.4.1.4641.6.2.523

NA

NA

This event is triggered when a card's card Invalid


boot order is configured incorrectly. Boot Order
Trap

enabledCardS 1.3.6.1.4.1.4641.6.2.527
hutdownV2Tra
p

NA

NA

This event is triggered when a card


which was enabled is shutdown

enabled Card
Shutdown
Trap

cardDegraded
V2Trap

1.3.6.1.4.1.4641.6.2.528

NA

NA

This event is trigged when a card


degradation is detected

card Degraded
Trap

sCardRefClkN 1.3.6.1.4.1.4641.6.2.529
oTogV2Trap

NA

NA

This event is triggered when a


switch card reference clock fails to
toggle.

sCard RefClk
No Tog Trap

cardFpgaUpgr
adeV2Trap

1.3.6.1.4.1.4641.6.2.532

NA

NA

This event is set when Line card


FPGA is upgraded.

cardFpga
Upgrade Trap

cardPowerFail
ureV2Trap

1.3.6.1.4.1.4641.6.2.533

NA

NA

This event is set when a power


card Power
failure is detected on a card. This is Failure Trap
valid on the 8830 only.

pcmModuleOf 1.3.6.1.4.1.4641.6.2.703
flineV2Trap

NA

NA

This event is set when a module


becomes non operational.

pcm Module
Offline Trap

pcmModuleOn 1.3.6.1.4.1.4641.6.2.704
lineV2Trap

NA

NA

This event is set when a module


becomes operational.

pcm Module
Online Trap

sCard
RefClkFail
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-181

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

pcmModuleFai 1.3.6.1.4.1.4641.6.2.705
ledV2Trap

NA

NA

This event is set when a module


fails, and is cleared when the
module becomes operational or is
removed.

pcm Module
Failed Trap

pcmModuleMi 1.3.6.1.4.1.4641.6.2.706
smatchV2Trap

NA

NA

This event is set when the module


type that has been inserted doesn't
match the configured type.

pcm Module
Mismatch
Trap

pcmModuleAd 1.3.6.1.4.1.4641.6.2.707
minChgV2Tra
p_enabled ( 1 )

NA

NA

This event is set when a module


changes admin state.

pcmModuleA
dminChg Trap

pcmEnabledM 1.3.6.1.4.1.4641.6.2.709
oduleRemoved
V2Trap

NA

NA

This event is set when a module


which was enabled is removed

pcmEnabledM
odule
Removed Trap

moduleTempE 1.3.6.1.4.1.4641.6.2.710
xceededV2Tra
p

NA

NA

This event is triggered when a


temperature threshold is exceeded
on a module.

module Temp
Exceeded
Trap

pcmEnabledM 1.3.6.1.4.1.4641.6.2.713
oduleRestarted
V2Trap

NA

NA

This event is set when a module is


restarted in enabled state.

pcmEnabledM
oduleRestarte
d Trap

pcmEnabledM 1.3.6.1.4.1.4641.6.2.714
oduleShutdow
nV2Trap

NA

NA

his event is set when a module is


shutdown in enabled state.

pcmEnabledM
odule
Shutdown
Trap

pcmEnabledM 1.3.6.1.4.1.4641.6.2.717
oduleFpgaUpg
radeV2Trap

NA

NA

This event is set when a module


FPGA is upgraded in enabled state.

pcmEnabledM
oduleFpgaUp
grade Trap

pcmPortAdmi
nChgV2Trap_
enabled ( 1 )

1.3.6.1.4.1.4641.6.2.801

NA

NA

This event is set when a port


changes admin state.

pcm Port
Admin
Change Trap

pcmPortOfflin
eV2Trap

1.3.6.1.4.1.4641.6.2.802

NA

NA

This event is set when a port


becomes non-operational.

pcm Port
Offline Trap

pcmPortOnlin
eV2Trap

1.3.6.1.4.1.4641.6.2.803

NA

NA

This event is set when a port


becomes operational.

pcm Port
Online Trap

pcmPortFailed 1.3.6.1.4.1.4641.6.2.804
V2Trap

NA

NA

This event is set when a port fails,


and is cleared when the port
becomes operational or when the
relevant module is removed.

pcm port
failed trap

pcmPortLOSV 1.3.6.1.4.1.4641.6.2.805
2Trap

NA

NA

This event is set when LOS alarm is pcm Port LOS


detected, and is cleared when the
Alarm On
alarm is cleared.

pcmPortNBET 1.3.6.1.4.1.4641.6.2.809
V2Trap

NA

NA

This event is set when N-BET alarm pcm Port


is detected, and is cleared when the NBET Alarm
alarm is cleared.
On

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-182

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

pcmPortFBET
V2Trap

1.3.6.1.4.1.4641.6.2.810

NA

NA

This event is set when F-BET alarm pcm Port


is detected, and is cleared when the FBET Alarm
alarm is cleared.
On

pcmPortLinkD 1.3.6.1.4.1.4641.6.2.811
nV2Trap

NA

NA

pcm port
This event is set when peer is
detected to be down and is cleared loopback
when the peer is detected to be up. added
This event applies to gige ports only.

pcmPortLpbk
V2Trap

1.3.6.1.4.1.4641.6.2.812

NA

NA

This event is set when port is in


loopback, and is cleared when the
loopback is removed.

pcmPortXcon
AlmV2Trap

1.3.6.1.4.1.4641.6.2.813

NA

NA

This event is set when cross connect pcmPortXcon


Alm Trap
alarm is detected (on a port that is
designated to carry a full port's
worth of traffic. Cross connects are
built between ports and LSPs) and is
cleared when the cross connection
comes back up.This event applies to
gige ports only.

pcmPortSfpR
mvdV2Trap

1.3.6.1.4.1.4641.6.2.815

NA

NA

This event is set when a SFP optics pcm Port


on PLM is removed.
SfpRmvd Trap

pcmPortSfpDe 1.3.6.1.4.1.4641.6.2.816
tdV2Trap

NA

NA

This event is set when a SFP optics


on PLM is detected.

pcm Port
SfpDetd Trap

pcmPortEnSfp 1.3.6.1.4.1.4641.6.2.817
RmvdV2Trap

NA

NA

This event is set when SFP optics


removed is associated with an
enabled port.

pcm Port
EnSfpRmvd
Trap

ifAdminChgV 1.3.6.1.4.1.4641.6.2.1102
2Trap_enabled
(1)

NA

NA

This event is set when the admin


state of a layer 3 interface changes.

if AdminChg
Trap

ifAdminChgV
2Trap_disable
d(2)

1.3.6.1.4.1.4641.6.2.1102

NA

NA

This event is set when the admin


state of a layer 3 interface changes.

if AdminChg
Trap

ifAdminChgV 1.3.6.1.4.1.4641.6.2.1102
2Trap_testing (
3)

NA

NA

This event is set when the admin


state of a layer 3 interface changes.

if AdminChg
Trap

ifCacOvSubV
2Trap

NA

NA

This event is set when accumulated if CacOvSub


bandwidth of all built circuits is
Trap
greater than the physical bandwidth

1.3.6.1.4.1.4641.6.2.1105

Description

Short
Description

pcm port
loopback
removed trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-183

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

ifOffLineV2Tr 1.3.6.1.4.1.4641.6.2.1107
ap

NA

NA

For layer 2 interfaces this event is If Offline Trap


set when the link status is down. For
layer 2 interfaces this event is
cleared when the protocol link
status is up. For layer 3 interfaces,
this event is set when admin state is
disabled. For layer 3 interfaces, this
event is cleared when admin state is
enabled.

ifOnLineV2Tr
ap

1.3.6.1.4.1.4641.6.2.1108

NA

NA

For layer 2 interfaces, this event is


set when protocol link status is up.
For layer 3 interfaces, this event is
set when admin state is enabled.

evaEventClear 1.3.6.1.4.1.4641.6.2.1402
V2Trap

NA

NA

A persistent event has been cleared eva Event


Clear Trap

evaExcessMin
orV2Trap

1.3.6.1.4.1.4641.6.2.1405

NA

NA

An excess of unacknowleged minor eva Excess


alarms exists in the system.
Minor Trap

evaExcessMaj
orV2Trap

1.3.6.1.4.1.4641.6.2.1406

NA

NA

An excess of unacknowleged major eva Excess


alarms exists in the system.
Major Trap

ospfGlblClrPr
ocessV2Trap

1.3.6.1.4.1.4641.6.2.1612

NA

NA

OSPF instance was restarted. All


counters reset to zero(0).

ospfGlblClr
Process Trap

ospfInstOperU 1.3.6.1.4.1.4641.6.2.1626
pV2Trap

NA

NA

Instance state changed to oper up

ospf Inst Oper


Up Trap

ospfInstOperD 1.3.6.1.4.1.4641.6.2.1627
nV2Trap

NA

NA

Instance state changed to oper up

ospf Inst Oper


Down Trap

ospfExtLsaHig 1.3.6.1.4.1.4641.6.2.1633
hThreshV2Tra
p

NA

NA

This event occurs when the number ospf Ext Lsa


High Thresh
of received LSAs in the OSPF
instance reaches the configured high Trap
threshold.It is cleared by the event 'OsLsaLoThr'.

ospfExtLsaLo 1.3.6.1.4.1.4641.6.2.1634
wThreshV2Tra
p

NA

NA

This event occurs when the number ospf Ext Lsa


Low Thresh
of received LSAs in the OSPF
instance reaches the configured low Trap
threshold,after 'OsLsaHiThr' has
occured.

ospfExMaxLs
aExceededV2
Trap

NA

NA

This event occurs when the number ospf Ex Max


Lsa Exceeded
of received LSAs in the OSPF
Trap
instance exceedes the configured
max LSAs. It can result in the
instance being operationally
disabled or simply a warning being
generated as a result. It is cleared by
'OsMaxLsaClr'.

1.3.6.1.4.1.4641.6.2.1635

If Online Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-184

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

ospfExtRedisR 1.3.6.1.4.1.4641.6.2.1637
outeHighThres
hV2Trap

NA

NA

This event occurs when the number ospf Ext Redis


of redistributed routes in the OSPF Route High
instance reaches the configured high Thresh Trap
threshold. It is cleared by the event 'OsRedLoThr'.

ospfExtIfState
ChgV2Trap

1.3.6.1.4.1.4641.6.2.1641

NA

NA

The OSPF Interface has changed its ospf Ext If


state.
State Change
Trap

ospfExtNbrSta 1.3.6.1.4.1.4641.6.2.1643
teChgV2Trap

NA

NA

The OSPF Neighbor State Machine ospf Ext Nbr


has changed its state.
State Change
Trap

mplsLspAdmi 1.3.6.1.4.1.4641.6.2.1903
nChangeV2Tr
ap_enabled ( 1
)

NA

NA

The administrative state of the LSP


was changed.

mplsLspUpV2 1.3.6.1.4.1.4641.6.2.1904
Trap

NA

NA

The operational status of the LSP is mplsLsp Up


up.
Trap

mplsLspDown 1.3.6.1.4.1.4641.6.2.1905
V2Trap

NA

NA

The operational status of the LSP is mplsLsp


down.
Down Trap

mplsLspActive 1.3.6.1.4.1.4641.6.2.1906
V2Trap

NA

NA

An LSP's operational status is up


and it is active.

mplsLsp
Active Trap

mplsTunnelUp 1.3.6.1.4.1.4641.6.2.1914
V2Trap

NA

NA

The operational status of the LSP


Tunnel is up.

mpls Tunnel
Up Trap

mplsTunnelDo 1.3.6.1.4.1.4641.6.2.1915
wnV2Trap

NA

NA

The operational status of the LSP


Tunnel is down.

mpls Tunnel
Down Trap

snmpLinkDow 1.3.6.1.4.1.4641.6.2.2302
nV2Trap

NA

NA

snmp Link
A linkUp trap signifies that the
sending protocol entity recognizes Down Trap
that one of the communication links
epresented in the agent's
configuration has come up.

snmpLinkUpV 1.3.6.1.4.1.4641.6.2.2303
2Trap

NA

NA

snmp Link Up
A linkUp trap signifies that the
sending protocol entity recognizes Trap
that one of the communication links
epresented in the agent's
configuration has come up.

mplsLdpSessi
onUpV2Trap

1.3.6.1.4.1.4641.6.2.2500

NA

NA

LDP session operational status is


up.

mplsLdp
Session Up
Trap

mplsLdpSessi 1.3.6.1.4.1.4641.6.2.2501
onDownV2Tra
p

NA

NA

LDP session operational status is


down.

mplsLdp
Session Down
Trap

mplsLsp
Admin
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-185

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

mplsLdpIntfO
nlineV2Trap

1.3.6.1.4.1.4641.6.2.2516

NA

NA

LDP Interface operstatus is up.

mplsLdp
Interface
Online Trap

mplsLdpIntfOf 1.3.6.1.4.1.4641.6.2.2517
flineV2Trap

NA

NA

LDP Interface operstatus is down.

mplsLdp
Interface
Offline Trap

temAreaAdmi 1.3.6.1.4.1.4641.6.2.2603
nChangeV2Tr
ap_enabled ( 1
)

NA

NA

TEM area TE Admin Status was


changed on the node.

temAreaAdmi
nChange Trap

temOspfIfOnli 1.3.6.1.4.1.4641.6.2.2604
neV2Trap

NA

NA

TEM OSPF interface operational


status changed to up on the node.

temOspf If
Online Trap

temOspfIfOffli 1.3.6.1.4.1.4641.6.2.2605
neV2Trap

NA

NA

TEM interface OSPF operational


status changed on the node.

temOspf If
Offline Trap

mplsAdminSta 1.3.6.1.4.1.4641.6.2.2808
teV2Trap_ena
bled ( 1 )

NA

NA

User has changed an MPLS admin


state.

mpls Admin
State Trap

mplsRsvpIntf 1.3.6.1.4.1.4641.6.2.2902
AdminStateV2
Trap_enabled (
1)

NA

NA

User has changed admin state for


RSVP on an Interface.

mplsRsvpIntf
Admin State
Trap

mplsRsvpIntf
OnlineV2Trap

1.3.6.1.4.1.4641.6.2.2904

NA

NA

RSVP Interface operstatus is up.

mplsRsvpIntf
Online Trap

mplsRsvpIntf 1.3.6.1.4.1.4641.6.2.2905
OfflineV2Trap

NA

NA

RSVP Interface operstatus is down. mplsRsvpIntf


Offline Trap

bfdSessionUp
V2Trap

1.3.6.1.4.1.4641.6.2.4000

NA

NA

bfd Session
Up Trap

bfdSessionDo
wnV2Trap

1.3.6.1.4.1.4641.6.2.4001

NA

NA

bfd Session
Down Trap

NA

NA

nonRedundant 1.3.6.1.4.1.4641.6.2.109
V2Trap

Description

Short
Description

Non
This event is triggered when the
node becomes non-redundant.When Redundant
evaNonRedundant trap exists, if the trap
redundancy status changes to a
value which should not cause a trap
(e.g. StandbyRpNotUpYet), the
existing trap should be cleared. If
the redundancy status changes from
'a' to 'b' both of which correspond to
evaNonRedundant traps, the trap
corresponding to 'a' should be
cleared and a new trap
corresponding to 'b' should be set.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-186

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. = 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies tellabs ospf if


that there has been a change in the state down
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfIfStateCha .1.3.6.1.2.1.14.16.2.16
nge

1.3.6.1. != 1
2.1.14.7
.1.12

An ospfIfStateChange trap signifies tellabs ospf if


that there has been a change in the state up
state of a non-virtualOSPF
interface. This trap should be
generated when the interface state
regresses (e.g., goes from Dr to
Down) or progresses to a terminal
state (i.e., Point-to-Point, DR
Other, Dr, or Backup)

ospfVirtIfState .1.3.6.1.2.1.14.16.2.1
Change

NA

An ospfIfStateChange trap signifies tellabs ospf


that there has been a change in the virtual if state
down
state of an OSPF virtual interface.
This trap should be generated when
the inter-face state regresses (e.g.,
goes from Point-to-Point to Down)
or progresses to a terminal state
(i.e., Point-to-Point).

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. != 8
2.1.14.1
0.1.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

tellabs ospf
neighbor state
down

ospfNbrStateC .1.3.6.1.2.1.14.16.2.2
hange

1.3.6.1. = 8
2.1.14.1
0.1.6

An ospfNbrStateChange trap
signifies that there has been a
change in the state of a non-virtual
OSPF neighbor. This trap should
be generated when the neighbor
state regresses (e.g., goes from
Attempt or Full to 1-Way or Down)
or progresses to a terminal state
(e.g., 2-Way or Full).

tellabs ospf
neighbor state
up

NA

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-187

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

Trap Name

Trap OID

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1. != 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

tellabs
ospf-virtual-n
eighbor-statedown

ospfVirtNbrSt
ateChange

.1.3.6.1.2.1.14.16.2.3

1.3.6.1. = 8
2.1.14.1
1.1.5

An ospfIfStateChange trap signifies


that there has been a change in the
state of an OSPF virtual neighbor.
This trap should be generated when
the neighbor state regresses (e.g.,
goes from Attempt or Full to
1-Way or Down) or progresses to a
terminal state (e.g., Full).

tellabs
ospf-virtual-n
eighbor-stateup

ospfIfConfigE
rror

.1.3.6.1.2.1.14.16.2.4

NA

NA

An ospfIfConfigError trap signifies tellabs


that a packet has been received on ospf-if-configerr
a non-virtual interface from a
router whose configuration
parameters conflict with this
router's configuration parameters.

ospfVirtIfConf .1.3.6.1.2.1.14.16.2.5
igError

NA

NA

tellabs
An ospfConfigError trap signifies
that a packet has been received on ospf-virtual-if
-config-err
a virtual interface from a router
whose configuration parameters
conflict with this router's
configuration parameters.

ospfIfAuthFail .1.3.6.1.2.1.14.16.2.6
ure

NA

NA

An ospfIfAuthFailure trap signifies tellabs


that a packet has been received on ospf-if-authen
a non-virtual interface from a router tic-fail
whose authentication key or
authentication type conflicts with
this router's authentication key or
authentication type.

ospfVirtIfAuth .1.3.6.1.2.1.14.16.2.7
Failure

NA

NA

tellabs
An ospfVirtIfAuthFailure trap
ospf-virtual-if
signifies that a packet has been
received on a virtual interface from -authentic-fail
a router whose authentication key
or authentication type conflicts
with this router's authentication key
or authentication type.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-188

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

ospfIfRxBadP
acket

.1.3.6.1.2.1.14.16.2.8

NA

NA

tellabs
An ospfIfRxBadPacket trap
signifies that an OSPF packet has ospf-if-bad-pa
cket
been received on a non-virtual
interface that cannot be parsed.

ospfVirtIfRxB
adPacket

.1.3.6.1.2.1.14.16.2.9

NA

NA

An ospfRxBadPacket trap signifies


that an OSPF packet has been
received on a virtual interface that
cannot be parsed.

tellabs
ospf-virtual-if
-bad-packet

ospfTxRetrans .1.3.6.1.2.1.14.16.2.10
mit

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a non-virtual
interface.

tellabs
ospf-if-packet
-retransmit

ospfVirtIfTxR
etransmit

.1.3.6.1.2.1.14.16.2.11

NA

NA

An ospfTxRetransmit trap signifies


than an OSPF packet has been
retransmitted on a virtual interface.

tellabs
ospf-virtual-if
-packet-retran
smit

ospfOriginate
Lsa

.1.3.6.1.2.1.14.16.2.12

NA

NA

An ospfOriginateLsa trap signifies tellabs


ospf-new-lsathat a new LSA has been
originated by this router. This trap originated
should not be invoked for simple
refreshes of LSAs (which happens
every 30 minutes), but instead will
only be invoked when an LSA is
(re)originated due to a topology
change.

ospfMaxAgeL
sa

.1.3.6.1.2.1.14.16.2.13

NA

NA

An ospfMaxAgeLsa trap signifies


that one of the LSA in the router's
link-state database has aged to
MaxAge.

bgpBackward
Transition

.1.3.6.1.2.1.15.7.2

NA

NA

The BGPBackwardTransition Event tellabs bgp


down trap
is generated when the BGP FSM
moves from a higher numbered state
to a lower numbered state.

bgpEstablishe
d

.1.3.6.1.2.1.15.7.1

1.3.6.1. = 6
2.1.15.3
.1.2

Description

The BGP Established event is


generated when the BGP FSM
enters the ESTABLISHED state.

Short
Description

tellabs
ospf-lsa-reach
ed-maxage

tellabs bgp
established
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-189

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

newRoot

1.3.6.1.2.1.17.0.1

NA

NA

The newRoot trap indicates that the tellabs new


sending agent has become the new root trap
root of the Spanning Tree; the trap is
sent by a bridge soon after its
election as the new root, e.g., upon
expiration of the Topology Change
Timer, immediately subsequent to
its election. Implementation of this
trap is optional.

topologyChan
ge

1.3.6.1.2.1.17.0.2

NA

NA

A topologyChange trap is sent by a


bridge when any of its configured
ports transitions from the Learning
state to the Forwarding state, or
from the Forwarding state to the
Blocking state. The trap is not sent
if a newRoot trap is sent for the
same transition. Implementation of
this trap is optional.

Description

Short
Description

tellabs
Spanning Tree
Topology
Changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-190

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

entConfigCha
nge

1.3.6.1.2.1.47.2.0.1

NA

NA

An entConfigChange notification is
generated when the value of
entLastChangeTime changes. It can
be utilized by an NMS to trigger
logical/physical entity table
maintenance polls.
An agent should not generate more
than one entConfigChange
'notification-event' in a given time
interval (five seconds is the
suggested default). A
'notification-event' is the
transmission of a single trap or
inform PDU to a list of notification
destinations.
If additional configuration changes
occur within the throttling period,
then notification-events for these
changes should be suppressed by the
agent until the current throttling
period expires. At the end of a
throttling period, one
notification-event should be
generated if any configuration
changes occurred since the start of
the throttling period. In such a case,
another throttling period is started
right away.
An NMS should periodically check
the value of entLastChangeTime to
detect any missed entConfigChange
notification-events, e.g., due to
throttling or transmission loss.

tellabs Entity
table
configuration
changed

acctngFileFull

.1.3.6.1.2.1.60.2.0.2

NA

NA

acctngFileFull trap

tellabs
acctngFileFull
trap

acctngFileNea
rlyFull

.1.3.6.1.2.1.60.2.0.1

NA

NA

acctngFileNearlyFull trap

tellabs
acctngFileNea
rlyFull trap

dsx1LineStatu
sChange

.1.3.6.1.2.1.10.18.15.0.1

NA

NA

dsx1 line status change

tellabs dsx1
line status
change

dsx3LineStatu
sChange

.1.3.6.1.2.1.10.30.15.0.1

NA

NA

dsx3 line status change

tellabs dsx3
line status
change

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-191

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

frDLCIStatus
Change

.1.3.6.1.2.1.10.32.0.1

NA

NA

fr dlci status invalid trap

tellabs fr dlci
status invalid
trap

ipv6IfStateCha .1.3.6.1.2.1.55.2.0.1
nge

NA

NA

ipv6-if-state-changed

tellabs
ipv6-if-state-c
hanged

mfrMibTrapB
undleLinkMis
match

NA

NA

mfrMibTrapBundleLinkMismatch
trap

tellabs
mfrMibTrapB
undleLinkMis
match trap

mplsLdpInitSe .1.3.6.1.2.1.10.166.3.2.0.1
sThresholdExc
eeded

NA

NA

mplsLdpInitSesThresholdExceeded tellabs
trap
mplsLdpInitS
esThresholdE
xceeded trap

mplsLdpPathV .1.3.6.1.2.1.10.166.3.2.0.2
ectorLimitMis
match

NA

NA

mplsLdpPathVectorLimitMismatch
trap

tellabs
mplsLdpPath
VectorLimitM
ismatch trap

mplsLdpSessi
onDown

.1.3.6.1.2.1.10.166.3.2.0.4

NA

NA

mplsLdpSessionDown trap

tellabs
mplsLdpSessi
onDown trap

mplsLdpSessi
onUp

.1.3.6.1.2.1.10.166.3.2.0.3

NA

NA

mplsLdpSessionUp trap

tellabs
mplsLdpSessi
onUp trap

mplsTunnelDo .1.3.6.1.2.1.10.166.3.0.2
wn

NA

NA

mpls te tunnel down trap

tellabs mpls te
tunnel down
trap

mplsTunnelRe .1.3.6.1.2.1.10.166.3.0.4
optimized

NA

NA

mpls te tunnel reoptimized trap

tellabs mpls te
tunnel
reoptimized
trap

mplsTunnelRe .1.3.6.1.2.1.10.166.3.0.3
routed

NA

NA

mpls te tunnel rerouted trap

tellabs mpls te
tunnel
rerouted trap

mplsTunnelUp .1.3.6.1.2.1.10.166.3.0.1

NA

NA

mpls te tunnel up trap

tellabs mpls te
tunnel up trap

pingProbeFail
ed

.1.3.6.1.2.1.80.0.1

NA

NA

pingProbeFailed trap

tellabs
pingProbeFail
ed trap

pingTestComp .1.3.6.1.2.1.80.0.3
leted

NA

NA

pingTestCompleted trap

tellabs
pingTestComp
leted trap

.1.3.6.1.2.1.10.47.4.0.1

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-192

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pingTestFailed .1.3.6.1.2.1.80.0.2

NA

NA

pingTestFailed trap

tellabs
pingTestFaile
d trap

RMON_Fallin
g_Alarm

.1.3.6.1.2.1.16.0.2

NA

NA

RMON_Falling_Alarm trap

tellabs
RMON_Fallin
g_Alarm trap

RMON_Packe
t_Match

.1.3.6.1.2.1.16.0.3

NA

NA

RMON_Packet_Match trap

tellabs
RMON_Packe
t_Match trap

RMON_Rise_
Alarm

.1.3.6.1.2.1.16.0.1

NA

NA

RMON_Rise_Alarm trap

tellabs
RMON_Rise_
Alarm trap

rptrGroupCha
nge

.1.3.6.1.2.1.22.0.2

NA

NA

rptrGroupChange trap

tellabs
rptrGroupCha
nge trap

rptrHealth

.1.3.6.1.2.1.22.0.1

NA

NA

rptrHealth trap

tellabs
rptrHealth trap

rptrResetEvent .1.3.6.1.2.1.22.0.3

NA

NA

rptrResetEvent trap

tellabs
rptrResetEven
t trap

traceRoutePat
hChange

.1.3.6.1.2.1.81.0.1

NA

NA

traceRoutePathChange trap

tellabs
traceRoutePat
hChange trap

traceRouteTest .1.3.6.1.2.1.81.0.3
Completed

NA

NA

traceRouteTestCompleted trap

tellabs
traceRouteTes
tCompleted
trap

traceRouteTest .1.3.6.1.2.1.81.0.2
Failed

NA

NA

traceRouteTestFailed trap

tellabs
traceRouteTes
tFailed trap

vrrpTrapAuthF .1.3.6.1.2.1.68.0.2
ailure

NA

NA

vrrp trap auth failure trap

tellabs vrrp
trap auth
failure trap

vrrpTrapNew
Master

.1.3.6.1.2.1.68.0.1

NA

NA

vrrp trap new master trap

tellabs vrrp
trap new
master trap

ipRouteAdded
V2Trap

.1.3.6.1.4.1.4641.6.2.1800

NA

NA

ip Route Added Trap

ip Route
Added Trap

ipRouteDelete
dV2Trap

.1.3.6.1.4.1.4641.6.2.1801

NA

NA

ip Route Deleted Trap

ip Route
Deleted Trap

ipRouteCostA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.1802

NA

NA

ip Route Cost Added Trap

ip Route Cost
Added Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-193

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

ipRouteCostD
eletedV2Trap

.1.3.6.1.4.1.4641.6.2.1803

NA

NA

ip Route Cost Deleted Trap

ip Route Cost
Deleted Trap

ipRouteCostAt .1.3.6.1.4.1.4641.6.2.1804
trChangeV2Tr
ap

NA

NA

ip Route Cost Attr Change Trap

ip Route Cost
Attr Change
Trap

ipRoutePathA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.1805

NA

NA

ip Route Path Added Trap

ip Route Path
Added Trap

ipRoutePathD
eletedV2Trap

.1.3.6.1.4.1.4641.6.2.1806

NA

NA

ip Route Path Deleted Trap

ip Route Path
Deleted Trap

ipRoutePathA
ctiveV2Trap

.1.3.6.1.4.1.4641.6.2.1807

NA

NA

ip Route Path Active Trap

ip Route Path
Active Trap

ipRoutePathIn
activeV2Trap

.1.3.6.1.4.1.4641.6.2.1808

NA

NA

ip Route Path Inactive Trap

ip Route Path
Inactive Trap

ipRouteActive
V2Trap

.1.3.6.1.4.1.4641.6.2.1809

NA

NA

ip Route Active Trap

ip Route
Active Trap

ipRouteInactiv .1.3.6.1.4.1.4641.6.2.1810
eV2Trap

NA

NA

ip Route Inactive Trap

ip Route
Inactive Trap

ipRouteAttrCh .1.3.6.1.4.1.4641.6.2.1811
angeV2Trap

NA

NA

ip Route Attr Change Trap

ip Route Attr
Change Trap

ipRouteBulkC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.1812

NA

NA

ip Route Bulk Change Trap

ip Route Bulk
Change Trap

SynRateThrV2 .1.3.6.1.4.1.4641.6.2.1813
Trap

NA

NA

Syn Rate Thr Trap

Syn Rate Thr


Trap

HlfOpenThrV
2Trap

.1.3.6.1.4.1.4641.6.2.1814

NA

NA

Hlf Open Thr Trap

Hlf Open Thr


Trap

PathChgV2Tra .1.3.6.1.4.1.4641.6.2.1815
p

NA

NA

Path Chg Trap

Path Chg Trap

bgpEstablishe
dV2Trap

.1.3.6.1.4.1.4641.6.2.1700

NA

NA

bgp Established Trap

bgp
Established
Trap

bgpMaxPfxMa .1.3.6.1.4.1.4641.6.2.1701
xThresholdV2
Trap

NA

NA

bgp MaxPfx MaxThreshold Trap

bgp MaxPfx
MaxThreshold
Trap

bgpMaxPfxEx
ceedActionV2
Trap

.1.3.6.1.4.1.4641.6.2.1702

NA

NA

bgp MaxPfx ExceedAction Trap

bgp MaxPfx
ExceedAction
Trap

bgpGlblAdmin .1.3.6.1.4.1.4641.6.2.1703
ChgV2Trap_e
nabled ( 1 )

NA

NA

bgp Glbl Admin Chg Trap

bgp Glbl
Admin Chg
Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-194

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

bgpGlblAdmin .1.3.6.1.4.1.4641.6.2.1703
ChgV2Trap_di
sabled ( 2 )

NA

NA

bgp Glbl Admin Chg Trap

bgp Glbl
Admin Chg
Trap

bgpGlblAdmin .1.3.6.1.4.1.4641.6.2.1703
ChgV2Trap_te
sting ( 3 )

NA

NA

bgp Glbl Admin Chg Trap

bgp Glbl
Admin Chg
Trap

bgpGlblAttrCh .1.3.6.1.4.1.4641.6.2.1704
gDbChangeV2
Trap

NA

NA

bgp Glbl Attr ChgDb Change Trap

bgp Glbl Attr


ChgDb
Change Trap

bgpPeerAddV
2Trap

.1.3.6.1.4.1.4641.6.2.1705

NA

NA

bgp Peer Add Trap

bgp Peer Add


Trap

bgpPeerDelV2 .1.3.6.1.4.1.4641.6.2.1706
Trap

NA

NA

bgp Peer Del Trap

bgp Peer Del


Trap

bgpPeerAttrCh .1.3.6.1.4.1.4641.6.2.1707
gDbChangeV2
Trap

NA

NA

bgp Peer Attr ChgDb Change Trap

bgp Peer Attr


ChgDb
Change Trap

bgpPeerGpAd
dV2Trap

.1.3.6.1.4.1.4641.6.2.1708

NA

NA

bgp PeerGp Add Trap

bgp PeerGp
Add Trap

bgpPeerGpDel .1.3.6.1.4.1.4641.6.2.1709
V2Trap

NA

NA

bgp PeerGp Del Trap

bgp PeerGp
Del Trap

.1.3.6.1.4.1.4641.6.2.1710

NA

NA

bgp PeerGp Attr ChgDb Change


Trap

bgp PeerGp
Attr ChgDb
Change Trap

bgpNetwkAdd .1.3.6.1.4.1.4641.6.2.1711
V2Trap

NA

NA

bgp Netwk Add Trap

bgp Netwk
Add Trap

bgpNetwkDel
V2Trap

.1.3.6.1.4.1.4641.6.2.1712

NA

NA

bgp Netwk Del Trap

bgp Netwk
Del Trap

bgpNetwkAttr .1.3.6.1.4.1.4641.6.2.1713
ChgDbChange
V2Trap

NA

NA

bgp Netwk Attr ChgDb Change


Trap

bgp Netwk
Attr ChgDb
Change Trap

bgpAggrAddV .1.3.6.1.4.1.4641.6.2.1714
2Trap

NA

NA

bgp Aggr Add Trap

bgp Aggr Add


Trap

bgpAggrDelV
2Trap

.1.3.6.1.4.1.4641.6.2.1715

NA

NA

bgp Aggr Del Trap

bgp Aggr Del


Trap

bgpAggrAttrC .1.3.6.1.4.1.4641.6.2.1716
hgDbChangeV
2Trap

NA

NA

bgp Aggr Attr ChgDb Change Trap

bgp Aggr Attr


ChgDb
Change Trap

bgpRedistAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.1717

NA

NA

bgp Redist Add Trap

bgp Redist
Add Trap

bgpRedistDel
V2Trap

.1.3.6.1.4.1.4641.6.2.1718

NA

NA

bgp Redist Del Trap

bgp Redist Del


Trap

Trap Name

bgpPeerGpAtt
rChgDbChang
eV2Trap

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-195

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

bgpRedistAttr .1.3.6.1.4.1.4641.6.2.1719
ChgDbChange
V2Trap

NA

NA

bgp Redist Attr ChgDb Change Trap bgp Redist


Attr ChgDb
Change Trap

bgpASpathList .1.3.6.1.4.1.4641.6.2.1720
AddV2Trap

NA

NA

bgp ASpath List Add Trap

bgp ASpath
List Add Trap

bgpASpathList .1.3.6.1.4.1.4641.6.2.1721
DelV2Trap

NA

NA

bgp ASpath List Del Trap

bgp ASpath
List Del Trap

bgpASpathList .1.3.6.1.4.1.4641.6.2.1722
AttrChgDbCh
angeV2Trap

NA

NA

bgp ASpath List Attr ChgDb


Change Trap

bgp ASpath
List Attr
ChgDb
Change Trap

bgpCommList
AddV2Trap

.1.3.6.1.4.1.4641.6.2.1723

NA

NA

bgp Comm List Add Trap

bgp Comm
List Add Trap

bgpCommList
DelV2Trap

.1.3.6.1.4.1.4641.6.2.1724

NA

NA

bgp Comm List Del Trap

bgp Comm
List Del Trap

bgpCommList
AttrChgDbCh
angeV2Trap

.1.3.6.1.4.1.4641.6.2.1725

NA

NA

bgp Comm List Attr ChgDb Change bgp Comm


Trap
List Attr
ChgDb
Change Trap

bgpMaxPfxMi .1.3.6.1.4.1.4641.6.2.1726
nThresholdV2
Trap

NA

NA

bgp Max Pfx Min Threshold Trap

bgp Max Pfx


Min Threshold
Trap

bgpMaxPfxEx
ceedClearV2T
rap

.1.3.6.1.4.1.4641.6.2.1727

NA

NA

bgp Max Pfx Exceed Clear Trap

bgp Max Pfx


Exceed Clear
Trap

bgpExtCLAdd .1.3.6.1.4.1.4641.6.2.1728
V2Trap

NA

NA

bgp ExtCL Add Trap

bgp ExtCL
Add Trap

bgpExtCLDel
V2Trap

.1.3.6.1.4.1.4641.6.2.1729

NA

NA

bgp ExtCL Del Trap

bgp ExtCL
Del Trap

bgpExtCLAttr .1.3.6.1.4.1.4641.6.2.1730
ChgDbChange
V2Trap

NA

NA

bgp ExtCL Attr ChgDb Change


Trap

bgp ExtCL
Attr ChgDb
Change Trap

bgpInstOperU
pV2Trap

.1.3.6.1.4.1.4641.6.2.1731

NA

NA

bgp Inst Oper Up Trap

bgp Inst Oper


Up Trap

bgpInstOperD
ownV2Trap

.1.3.6.1.4.1.4641.6.2.1732

NA

NA

bgp Inst Oper Down Trap

bgp Inst Oper


Down Trap

bgpInstRtrIdC
hgV2Trap

.1.3.6.1.4.1.4641.6.2.1733

NA

NA

bgp Inst RtrId Chg Trap

bgp Inst RtrId


Chg Trap

bgpPeerAdmin .1.3.6.1.4.1.4641.6.2.1734
ChgV2Trap_e
nabled ( 1 )

NA

NA

bgp Peer Admin Chg Trap

bgp Peer
Admin Chg
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-196

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

bgpPeerAdmin .1.3.6.1.4.1.4641.6.2.1734
ChgV2Trap_di
sabled ( 2 )

NA

NA

bgp Peer Admin Chg Trap

bgp Peer
Admin Chg
Trap

bgpPeerAdmin .1.3.6.1.4.1.4641.6.2.1734
ChgV2Trap_te
sting ( 3 )

NA

NA

bgp Peer Admin Chg Trap

bgp Peer
Admin Chg
Trap

bgpPeerGpAd .1.3.6.1.4.1.4641.6.2.1735
minChgV2Tra
p_enabled ( 1 )

NA

NA

bgp Peer Gp Admin Chg Trap

bgp Peer Gp
Admin Chg
Trap

bgpPeerGpAd
minChgV2Tra
p_disabled ( 2
)

.1.3.6.1.4.1.4641.6.2.1735

NA

NA

bgp Peer Gp Admin Chg Trap

bgp Peer Gp
Admin Chg
Trap

bgpPeerGpAd
minChgV2Tra
p_testing ( 3 )

.1.3.6.1.4.1.4641.6.2.1735

NA

NA

bgp Peer Gp Admin Chg Trap

bgp Peer Gp
Admin Chg
Trap

bgpPeerEstab
V2Trap

.1.3.6.1.4.1.4641.6.2.1736

NA

NA

bgp Peer Estab Trap

bgp Peer Estab


Trap

bgpPeerDown
V2Trap

.1.3.6.1.4.1.4641.6.2.1737

NA

NA

bgp Peer Down Trap

bgp Peer
Down Trap

bgpProcAttrC
hgV2Trap

.1.3.6.1.4.1.4641.6.2.1738

NA

NA

bgp Proc Attr Chg Trap

bgp Proc Attr


Chg Trap

bgpProcGRSt
ChgV2Trap

.1.3.6.1.4.1.4641.6.2.1739

NA

NA

bgp ProcGRSt Chg Trap

bgp ProcGRSt
Chg Trap

bgpPeerInRest .1.3.6.1.4.1.4641.6.2.1740
artV2Trap

NA

NA

bgp Peer InRestart Trap

bgp Peer
InRestart Trap

bgpPeerOutOf .1.3.6.1.4.1.4641.6.2.1741
RestartV2Trap

NA

NA

bgp Peer OutOfRestart Trap

bgp Peer
OutOfRestart
Trap

ospfIfStateChg .1.3.6.1.4.1.4641.6.2.1600
V2Trap

NA

NA

ospf If State Chg Trap

ospf If State
Chg Trap

ospfVIfStateC
hgV2Trap

.1.3.6.1.4.1.4641.6.2.1601

NA

NA

ospf VIf State Chg Trap

ospf VIf State


Chg Trap

ospfNbrStateC .1.3.6.1.4.1.4641.6.2.1602
hgV2Trap

NA

NA

ospf Nbr State Chg Trap

ospf Nbr State


Chg Trap

ospfVNbrState .1.3.6.1.4.1.4641.6.2.1603
ChgV2Trap

NA

NA

ospf VNbr State Chg Trap

ospf VNbr
State Chg Trap

ospfIfConfErr
V2Trap

.1.3.6.1.4.1.4641.6.2.1604

NA

NA

ospf If Conf Err Trap

ospf If Conf
Err Trap

ospfVIfConfEr .1.3.6.1.4.1.4641.6.2.1605
rV2Trap

NA

NA

ospf VIf Conf Err Trap

ospf VIf Conf


Err Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-197

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

ospfIfAuthFail .1.3.6.1.4.1.4641.6.2.1606
V2Trap

NA

NA

ospf If Auth Fail Trap

ospf If Auth
Fail Trap

ospfVIfAuthF
ailV2Trap

.1.3.6.1.4.1.4641.6.2.1607

NA

NA

ospf VIf Auth Fail Trap

ospf VIf Auth


Fail Trap

ospfOrigLsaV
2Trap

.1.3.6.1.4.1.4641.6.2.1608

NA

NA

ospf Orig Lsa Trap

ospf Orig Lsa


Trap

ospfMaxAgeL
saV2Trap

.1.3.6.1.4.1.4641.6.2.1609

NA

NA

ospf Max Age Lsa Trap

ospf Max Age


Lsa Trap

ospfGlblAttrC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.1610

NA

NA

ospf Glbl Attr Change Trap

ospf Glbl Attr


Change Trap

ospfGlblClrCo .1.3.6.1.4.1.4641.6.2.1611
untersV2Trap

NA

NA

ospf Glbl Clr Counters Trap

ospf Glbl Clr


Counters Trap

ospfAreaAttrC .1.3.6.1.4.1.4641.6.2.1613
hangeV2Trap

NA

NA

ospf Area Attr Change Trap

ospf Area Attr


Change Trap

ospfAreaAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.1614

NA

NA

ospf Area Add Trap

ospf Area Add


Trap

ospfAreaDelV
2Trap

.1.3.6.1.4.1.4641.6.2.1615

NA

NA

ospf Area Del Trap

ospf Area Del


Trap

ospfIfAttrCha
ngeV2Trap

.1.3.6.1.4.1.4641.6.2.1616

NA

NA

ospf If Attr Change Trap

ospf If Attr
Change Trap

ospfRedistAdd .1.3.6.1.4.1.4641.6.2.1617
V2Trap

NA

NA

ospf Redist Add Trap

ospf Redist
Add Trap

ospfRedistDel
V2Trap

.1.3.6.1.4.1.4641.6.2.1618

NA

NA

ospf Redist Del Trap

ospf Redist
Del Trap

ospfNwkAddV .1.3.6.1.4.1.4641.6.2.1619
2Trap

NA

NA

ospf Nwk Add Trap

ospf Nwk Add


Trap

ospfNwkDelV
2Trap

.1.3.6.1.4.1.4641.6.2.1620

NA

NA

ospf Nwk Del Trap

ospf Nwk Del


Trap

ospfVIfAddV2 .1.3.6.1.4.1.4641.6.2.1621
Trap

NA

NA

ospf VIf Add Trap

ospf VIf Add


Trap

ospfVIfDelV2
Trap

.1.3.6.1.4.1.4641.6.2.1622

NA

NA

ospf VIf Del Trap

ospf VIf Del


Trap

ospfVIfAttrCh .1.3.6.1.4.1.4641.6.2.1623
angeV2Trap

NA

NA

ospf VIf Attr Change Trap

ospf VIf Attr


Change Trap

ospfGlblAdmi
nChgV2Trap

.1.3.6.1.4.1.4641.6.2.1624

NA

NA

ospf Glbl Admin Chg Trap

ospf Glbl
Admin Chg
Trap

ospfOverloadS .1.3.6.1.4.1.4641.6.2.1625
tateChgV2Tra
p

NA

NA

ospf Over load State Chg Trap

ospf Over load


State Chg Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-198

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

ospfExtAreaN
ssaTrRoleChg
V2Trap

.1.3.6.1.4.1.4641.6.2.1628

NA

NA

ospf Ext Area Nssa Tr Role Chg


Trap

ospf Ext Area


Nssa Tr Role
Chg Trap

ospfExtAreaN
ssaTrStateChg
V2Trap

.1.3.6.1.4.1.4641.6.2.1629

NA

NA

ospf Ext Area Nssa Tr State


ChgTrap

ospf Ext Area


Nssa Tr State
ChgTrap

ospfExtAreaA
ggrAddV2Tra
p

.1.3.6.1.4.1.4641.6.2.1630

NA

NA

ospf Ext Area Aggr Add Trap

ospf Ext Area


Aggr Add
Trap

ospfExtAreaA .1.3.6.1.4.1.4641.6.2.1631
ggrDelV2Trap

NA

NA

ospf Ext Area Aggr Del Trap

ospf Ext Area


Aggr Del Trap

ospfExtAreaA .1.3.6.1.4.1.4641.6.2.1632
ggrAttrChgV2
Trap

NA

NA

ospf Ext Area Aggr Attr Chg Trap

ospf Ext Area


Aggr Attr Chg
Trap

.1.3.6.1.4.1.4641.6.2.1636

NA

NA

ospf Ex Max Lsa Cleared Trap

ospf Ex Max
Lsa Cleared
Trap

ospfExtRedisR .1.3.6.1.4.1.4641.6.2.1638
outeLowThres
hV2Trap

NA

NA

ospf Ext Redis Route High Thresh


Trap

ospf Ext Redis


Route High
Thresh Trap

ospfExMaxRe .1.3.6.1.4.1.4641.6.2.1639
disRouteExcee
dedV2Trap

NA

NA

ospf Ex Max Redis Route Exceeded ospf Ex Max


Trap
Redis Route
Exceeded
Trap

.1.3.6.1.4.1.4641.6.2.1640

NA

NA

ospf Ex Max Redis Route Cleared


Trap

ospf Ex Max
Redis Route
Cleared Trap

ospfExtVIfStat .1.3.6.1.4.1.4641.6.2.1642
eChgV2Trap

NA

NA

ospf Ext VIf State Chg Trap

ospf Ext VIf


State Chg Trap

ospfExtVNbrS .1.3.6.1.4.1.4641.6.2.1644
tateChgV2Tra
p

NA

NA

ospf Ext VNbr State Chg Trap

ospf Ext VNbr


State Chg Trap

ospfExtIfConf
ErrV2Trap

.1.3.6.1.4.1.4641.6.2.1645

NA

NA

ospf Ext If Conf Err Trap

ospf Ext If
Conf Err Trap

ospfExtVIfCo
nfErrV2Trap

.1.3.6.1.4.1.4641.6.2.1646

NA

NA

ospf Ext VIf Conf Err Trap

ospf Ext VIf


Conf Err Trap

ospfExtIfAuth
FailV2Trap

.1.3.6.1.4.1.4641.6.2.1647

NA

NA

ospf Ext If Auth Fail Trap

ospf Ext If
Auth Fail Trap

ospfExtVIfAut .1.3.6.1.4.1.4641.6.2.1648
hFailV2Trap

NA

NA

ospf Ext VIf Auth Fail Trap

ospf Ext VIf


Auth Fail Trap

ospfExMaxLs
aClearedV2Tr
ap

ospfExMaxRe
disRouteClear
edV2Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-199

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

ospfExtNbrDn .1.3.6.1.4.1.4641.6.2.1649
ReasonV2Trap

NA

NA

ospf Ext Nbr Dn Reason Trap

ospf Ext Nbr


Dn Reason
Trap

OsExNbrGrR
V2Trap

.1.3.6.1.4.1.4641.6.2.1650

NA

NA

Os ExNbr GrR Trap

Os ExNbr GrR
Trap

OsExNbrGrD
V2Trap

.1.3.6.1.4.1.4641.6.2.1651

NA

NA

Os ExNbr GrD Trap

Os ExNbr GrD
Trap

OsExVNbGrR .1.3.6.1.4.1.4641.6.2.1652
V2Trap

NA

NA

Os ExVNb GrR Trap

Os ExVNb
GrR Trap

OsExVNbGrD .1.3.6.1.4.1.4641.6.2.1653
V2Trap

NA

NA

Os ExVNb GrD Trap

Os ExVNb
GrD Trap

ospfAreaDupR .1.3.6.1.4.1.4641.6.2.1654
trIdV2Trap

NA

NA

ospf Area Dup Rtr Id Trap

ospf Area Dup


Rtr Id Trap

mplsLdpIntfA
ddV2Trap

.1.3.6.1.4.1.4641.6.2.2508

NA

NA

mpls Ldp Intf Add Trap

mpls Ldp Intf


Add Trap

mplsLdpIntfD
elV2Trap

.1.3.6.1.4.1.4641.6.2.2509

NA

NA

mpls Ldp Intf Del Trap

mpls Ldp Intf


Del Trap

mplsLdpIntfA .1.3.6.1.4.1.4641.6.2.2510
dmnStateV2Tr
ap

NA

NA

mpls Ldp Intf Admn State Trap

mpls Ldp Intf


Admn State
Trap

mplsLdpIntfAt .1.3.6.1.4.1.4641.6.2.2511
trChgV2Trap

NA

NA

mpls Ldp Intf Attr Chg Trap

mpls Ldp Intf


Attr Chg Trap

mplsLdpGlblA .1.3.6.1.4.1.4641.6.2.2520
ttrChgV2Trap

NA

NA

mpls Ldp Glbl Attr Chg Trap

mpls Ldp Glbl


Attr Chg Trap

mplsLdpAuth
DelV2Trap

.1.3.6.1.4.1.4641.6.2.2522

NA

NA

mpls Ldp Auth Del Trap

mpls Ldp
Auth Del Trap

mplsLdpAuth
ChangeV2Tra
p

.1.3.6.1.4.1.4641.6.2.2523

NA

NA

mpls Ldp Auth Change Trap

mpls Ldp
Auth Change
Trap

mplsLdpAuth
AddV2Trap

.1.3.6.1.4.1.4641.6.2.2524

NA

NA

mpls Ldp Auth Add Trap

mpls Ldp
Auth Add
Trap

mplsLdpPeerA .1.3.6.1.4.1.4641.6.2.2525
ttrChangeV2Tr
ap

NA

NA

mpls Ldp Peer Attr Change Trap

mpls Ldp Peer


Attr Change
Trap

LdpFBAddV2
Trap

.1.3.6.1.4.1.4641.6.2.2526

NA

NA

Ldp FB Add Trap

Ldp FB Add
Trap

LdpFBAttChV .1.3.6.1.4.1.4641.6.2.2527
2Trap

NA

NA

Ldp FB Att Ch Trap

Ldp FB Att Ch
Trap

LdpFBAdmCh .1.3.6.1.4.1.4641.6.2.2528
V2Trap

NA

NA

Ldp FB Adm Ch Trap

Ldp FB Adm
Ch Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-200

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

LdpFBDelV2T .1.3.6.1.4.1.4641.6.2.2529
rap

NA

NA

Ldp FB Del Trap

Ldp FB Del
Trap

atmAdminStat .1.3.6.1.4.1.4641.6.2.3200
eV2Trap_enab
led ( 1 )

NA

NA

atm Admin State Trap

atm Admin
State Trap

atmAdminStat
eV2Trap_disa
bled ( 2 )

.1.3.6.1.4.1.4641.6.2.3200

NA

NA

atm Admin State Trap

atm Admin
State Trap

atmAdminStat
eV2Trap_testi
ng ( 3 )

.1.3.6.1.4.1.4641.6.2.3200

NA

NA

atm Admin State Trap

atm Admin
State Trap

atmGlobalCha
ngedDbChang
eV2Trap

.1.3.6.1.4.1.4641.6.2.3201

NA

NA

atm Global Changed Db Change


Trap

atm Global
Changed Db
Change Trap

pnniAdminSta .1.3.6.1.4.1.4641.6.2.3202
teV2Trap_ena
bled ( 1 )

NA

NA

pnni Admin State Trap

pnni Admin
State Trap

pnniAdminSta .1.3.6.1.4.1.4641.6.2.3202
teV2Trap_disa
bled ( 2 )

NA

NA

pnni Admin State Trap

pnni Admin
State Trap

pnniAdminSta .1.3.6.1.4.1.4641.6.2.3202
teV2Trap_testi
ng ( 3 )

NA

NA

pnni Admin State Trap

pnni Admin
State Trap

pnniGlobalCh
angedDbChan
geV2Trap

.1.3.6.1.4.1.4641.6.2.3203

NA

NA

pnni Global Changed Db Change


Trap

pnni Global
Changed Db
Change Trap

atmPnniNode
AddV2Trap

.1.3.6.1.4.1.4641.6.2.3204

NA

NA

atm Pnni Node Add Trap

atm Pnni Node


Add Trap

atmPnniNode
DelV2Trap

.1.3.6.1.4.1.4641.6.2.3205

NA

NA

atm Pnni Node Del Trap

atm Pnni Node


Del Trap

atmPnniNode .1.3.6.1.4.1.4641.6.2.3206
AdminChange
V2Trap_up ( 1
)

NA

NA

atm Pnni Node Admin Change Trap atm Pnni Node


Admin
Change Trap

.1.3.6.1.4.1.4641.6.2.3206

NA

NA

atm Pnni Node Admin Change Trap atm Pnni Node


Admin
Change Trap

atmPnniNode .1.3.6.1.4.1.4641.6.2.3207
AttrChangeDb
ChangeV2Tra
p

NA

NA

atm Pnni Node Admin Change Trap atm Pnni Node


Admin
Change Trap

Trap Name

atmPnniNode
AdminChange
V2Trap_down
(2)

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-201

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

atmPnniNodeP .1.3.6.1.4.1.4641.6.2.3208
glAttrChange
DbChangeV2T
rap

NA

NA

atm Pnni Node Pgl Attr Change Db atm Pnni Node


Change Trap
Pgl Attr
Change Db
Change Trap

.1.3.6.1.4.1.4641.6.2.3209

NA

NA

atm Pnni Node Timer Attr Change


Db Change Trap

atmPnniNodeS .1.3.6.1.4.1.4641.6.2.3210
vccAttrChange
DbChangeV2T
rap

NA

NA

atm Pnni Node Svcc Attr Change Db atm Pnni Node


Change Trap
Svcc Attr
Change Db
Change Trap

pnniIntfOnline .1.3.6.1.4.1.4641.6.2.3211
V2Trap

NA

NA

pnni Intf Online Trap

pnni Intf
Online Trap

pnniIntfOfflin
eV2Trap

.1.3.6.1.4.1.4641.6.2.3212

NA

NA

pnni Intf Offline Trap

pnni Intf
Offline Trap

pnniIntfAdmin .1.3.6.1.4.1.4641.6.2.3213
StateV2Trap_e
nabled ( 1 )

NA

NA

pnni Intf Admin State Trap

pnni Intf
Admin State
Trap

pnniIntfAdmin .1.3.6.1.4.1.4641.6.2.3213
StateV2Trap_d
isabled ( 2 )

NA

NA

pnni Intf Admin State Trap

pnni Intf
Admin State
Trap

pnniIntfAdmin .1.3.6.1.4.1.4641.6.2.3213
StateV2Trap_t
esting ( 3 )

NA

NA

pnni Intf Admin State Trap

pnni Intf
Admin State
Trap

pnniIntfAttrCh .1.3.6.1.4.1.4641.6.2.3214
gDbChangeV2
Trap

NA

NA

pnni Intf Attr ChgDb Change Trap

pnni Intf Attr


ChgDb
Change Trap

pnniIlmiIntfO
nlineV2Trap

.1.3.6.1.4.1.4641.6.2.3215

NA

NA

pnni Ilmi Intf Online Trap

pnni Ilmi Intf


Online Trap

pnniIlmiIntfOf .1.3.6.1.4.1.4641.6.2.3216
flineV2Trap

NA

NA

pnni Ilmi Intf Offline Trap

pnni Ilmi Intf


Offline Trap

pnniIlmiIntfA .1.3.6.1.4.1.4641.6.2.3217
dminStateV2T
rap_enabled (
1)

NA

NA

pnni Ilmi Intf Admin State Trap

pnni Ilmi Intf


Admin State
Trap

pnniIlmiIntfA .1.3.6.1.4.1.4641.6.2.3217
dminStateV2T
rap_disabled (
2)

NA

NA

pnni Ilmi Intf Admin State Trap

pnni Ilmi Intf


Admin State
Trap

atmPnniNode
TimerAttrCha
ngeDbChange
V2Trap

atm Pnni Node


Timer Attr
Change Db
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-202

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pnniIlmiIntfA .1.3.6.1.4.1.4641.6.2.3217
dminStateV2T
rap_testing ( 3
)

NA

NA

pnni Ilmi Intf Admin State Trap

pnni Ilmi Intf


Admin State
Trap

pnniIlmiIntfAt .1.3.6.1.4.1.4641.6.2.3218
trChgDbChan
geV2Trap

NA

NA

pnni Ilmi Intf Attr ChgDb Change


Trap

pnni Ilmi Intf


Attr ChgDb
Change Trap

pnniSigIntfOnl .1.3.6.1.4.1.4641.6.2.3219
ineV2Trap

NA

NA

pnni SigIntf Online Trap

pnni SigIntf
Online Trap

pnniSigIntfOff .1.3.6.1.4.1.4641.6.2.3220
lineV2Trap

NA

NA

pnni SigIntf Offline Trap

pnni SigIntf
Offline Trap

pnniSigIntfAd .1.3.6.1.4.1.4641.6.2.3221
minStateV2Tr
ap_enabled ( 1
)

NA

NA

pnni SigIntf Admin State Trap

pnni SigIntf
Admin State
Trap

pnniSigIntfAd .1.3.6.1.4.1.4641.6.2.3221
minStateV2Tr
ap_disabled ( 2
)

NA

NA

pnni SigIntf Admin State Trap

pnni SigIntf
Admin State
Trap

pnniSigIntfAd .1.3.6.1.4.1.4641.6.2.3221
minStateV2Tr
ap_testing ( 3 )

NA

NA

pnni SigIntf Admin State Trap

pnni SigIntf
Admin State
Trap

pnniSigIntfAtt .1.3.6.1.4.1.4641.6.2.3222
rChgDbChang
eV2Trap

NA

NA

pnni SigIntf Attr ChgDb Change


Trap

pnni SigIntf
Attr ChgDb
Change Trap

atmIfSoftPvcA .1.3.6.1.4.1.4641.6.2.3223
ddrAddV2Tra
p

NA

NA

atm IfSoft Pvc Addr Add Trap

atm IfSoft Pvc


Addr Add
Trap

atmIfSoftPvcA .1.3.6.1.4.1.4641.6.2.3224
ddrDelV2Trap

NA

NA

atm IfSoft Pvc Addr Del Trap

atm IfSoft Pvc


Addr Del Trap

atmNetPrefix
AddV2Trap

.1.3.6.1.4.1.4641.6.2.3225

NA

NA

atm Net Prefix Add Trap

atm Net Prefix


Add Trap

atmNetPrefix
DelV2Trap

.1.3.6.1.4.1.4641.6.2.3226

NA

NA

atm Net Prefix Del Trap

atm Net Prefix


Del Trap

atmSvccRccD
ownV2Trap

.1.3.6.1.4.1.4641.6.2.3227

NA

NA

atm Svcc Rcc Down Trap

atm Svcc Rcc


Down Trap

ConnTrcV2Tra .1.3.6.1.4.1.4641.6.2.3228
p

NA

NA

Conn Trc Trap

Conn Trc Trap

ConnTrc1V2T .1.3.6.1.4.1.4641.6.2.3229
rap

NA

NA

Conn Trc1 Trap

Conn Trc1
Trap

ConnTrc2V2T .1.3.6.1.4.1.4641.6.2.3230
rap

NA

NA

Conn Trc2 Trap

Conn Trc2
Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-203

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmModuleAd .1.3.6.1.4.1.4641.6.2.700
dedV2Trap

NA

NA

pcm Module Added Trap

pcm Module
Added Trap

pcmModuleDe .1.3.6.1.4.1.4641.6.2.701
letedV2Trap

NA

NA

pcm Module Deleted Trap

pcm Module
Deleted Trap

pcmModuleRe .1.3.6.1.4.1.4641.6.2.702
movedV2Trap

NA

NA

pcm Module Removed Trap

pcm Module
Removed Trap

pcmModuleIns .1.3.6.1.4.1.4641.6.2.708
ertedV2Trap

NA

NA

pcm Module Inserted Trap

pcm Module
Inserted Trap

pcmModuleRe .1.3.6.1.4.1.4641.6.2.711
startedV2Trap

NA

NA

pcm Module Restarted Trap

pcm Module
Restarted Trap

pcmModuleSh .1.3.6.1.4.1.4641.6.2.712
utdownV2Trap

NA

NA

pcm Module Shutdown Trap

pcm Module
Shutdown
Trap

pcmModuleAt
trChgV2Trap

.1.3.6.1.4.1.4641.6.2.715

NA

NA

pcm Module Attr Chg Trap

pcm Module
Attr Chg Trap

pcmModuleFp .1.3.6.1.4.1.4641.6.2.716
gaUpgradeV2
Trap

NA

NA

pcm Module Fpga Upgrade Trap

pcm Module
Fpga Upgrade
Trap

ModFpgaFlV2 .1.3.6.1.4.1.4641.6.2.718
Trap

NA

NA

Mod Fpga Fl Trap

Mod Fpga Fl
Trap

pcmPortAttrC .1.3.6.1.4.1.4641.6.2.800
hgDbChangeV
2Trap

NA

NA

pcm Port Attr ChgDb Change Trap

pcm Port Attr


ChgDb
Change Trap

pcmPortLOFV .1.3.6.1.4.1.4641.6.2.806
2Trap

NA

NA

pcm Port LOF Trap

pcm Port LOF


Trap

pcmPortAISV
2Trap

.1.3.6.1.4.1.4641.6.2.807

NA

NA

pcm Port AIS Trap

pcm Port AIS


Trap

pcmPortRDIV
2Trap

.1.3.6.1.4.1.4641.6.2.808

NA

NA

pcm Port RDI Trap

pcm Port RDI


Trap

pcmFeStsChg
V2Trap

.1.3.6.1.4.1.4641.6.2.814

NA

NA

pcm FeSts Chg Trap

pcm FeSts
Chg Trap

pcmPortSfpTx .1.3.6.1.4.1.4641.6.2.818
FaultStsChgV
2Trap

NA

NA

pcm Port SfpTx Fault Sts Chg Trap

pcm Port
SfpTx Fault
Sts Chg Trap

pcmPortPlgabl .1.3.6.1.4.1.4641.6.2.819
eTxRmvdV2T
rap

NA

NA

pcm Port Plgable Tx Rmvd Trap

pcm Port
Plgable Tx
Rmvd Trap

pcmPortPlgabl .1.3.6.1.4.1.4641.6.2.820
eTxDetdV2Tra
p

NA

NA

pcm Port Plgable Tx Detd Trap

pcm Port
Plgable Tx
Detd Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-204

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmPortEnPlg .1.3.6.1.4.1.4641.6.2.821
ableTxRmvdV
2Trap

NA

NA

pcm Port EnPlgable Tx Rmvd Trap

pcm Port
EnPlgable Tx
Rmvd Trap

pcmPortPlgabl .1.3.6.1.4.1.4641.6.2.822
eTxTxFaultSts
ChgV2Trap

NA

NA

pcm Port Plgable TxTx Fault Sts


Chg Trap

pcm Port
Plgable TxTx
Fault Sts Chg
Trap

pcmPortEnPlg .1.3.6.1.4.1.4641.6.2.823
ableTxMismat
chV2Trap

NA

NA

pcm Port EnPlgable Tx Mismatch


Trap

pcm Port
EnPlgable Tx
Mismatch
Trap

pcmPortCoppe .1.3.6.1.4.1.4641.6.2.824
rGigeAnDisab
ledV2Trap

NA

NA

pcm Port Copper Gige AnDisabled


Trap

pcm Port
Copper Gige
AnDisabled
Trap

SFBV2Trap

.1.3.6.1.4.1.4641.6.2.825

NA

NA

SFB Trap

SFB Trap

TXLaserDGV
2Trap

.1.3.6.1.4.1.4641.6.2.826

NA

NA

TX Laser DG Trap

TX Laser DG
Trap

.1.3.6.1.4.1.4641.6.2.827

NA

NA

Lp Detect Trap

Lp Detect
Trap

LpClearV2Tra .1.3.6.1.4.1.4641.6.2.828
p

NA

NA

Lp Clear Trap

Lp Clear Trap

cardAddedV2
Trap

.1.3.6.1.4.1.4641.6.2.500

NA

NA

card Added Trap

card Added
Trap

cardDeletedV2 .1.3.6.1.4.1.4641.6.2.501
Trap

NA

NA

card Deleted Trap

card Deleted
Trap

cardSwDnldD
oneV2Trap

.1.3.6.1.4.1.4641.6.2.510

NA

NA

card Sw Dnld Done Trap

card Sw Dnld
Done Trap

cardAttrChang .1.3.6.1.4.1.4641.6.2.512
eDbChangeV2
Trap

NA

NA

card Attr Change Db Change Trap

card Attr
Change Db
Change Trap

cardSwDnldIn .1.3.6.1.4.1.4641.6.2.513
itV2Trap

NA

NA

card Sw Dnld Init Trap

card Sw Dnld
Init Trap

cardSwDnldFa .1.3.6.1.4.1.4641.6.2.514
ilV2Trap

NA

NA

card Sw Dnld Fail Trap

card Sw Dnld
Fail Trap

cardSwSltVer
ChangeV2Tra
p

.1.3.6.1.4.1.4641.6.2.515

NA

NA

card Sw Slt Ver Change Trap

card Sw Slt
Ver Change
Trap

cardTestV2Tra .1.3.6.1.4.1.4641.6.2.517
p

NA

NA

card Test Trap

card Test Trap

Trap Name

Trap OID

LpDetectV2Tr
ap

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-205

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

cardSwDnldA
bortV2Trap

.1.3.6.1.4.1.4641.6.2.524

NA

NA

card Sw Dnld Abort Trap

card Sw Dnld
Abort Trap

cardShutdown
V2Trap

.1.3.6.1.4.1.4641.6.2.525

NA

NA

card Shutdown Trap

card
Shutdown
Trap

cardFastBootF .1.3.6.1.4.1.4641.6.2.526
ailedV2Trap

NA

NA

card Fast Boot Failed Trap

card Fast Boot


Failed Trap

cardFormatCm .1.3.6.1.4.1.4641.6.2.530
pltV2Trap

NA

NA

card Format Cmplt Trap

card Format
Cmplt Trap

cardSmallCam .1.3.6.1.4.1.4641.6.2.531
DbChangeV2T
rap

NA

NA

card Small Cam DbChange Trap

card Small
Cam
DbChange
Trap

NpTmRsrcEx
V2Trap

.1.3.6.1.4.1.4641.6.2.534

NA

NA

NpTm Rsrc Ex Trap

NpTm Rsrc Ex
Trap

CardAsReitV2 .1.3.6.1.4.1.4641.6.2.535
Trap

NA

NA

Card AsReit Trap

Card AsReit
Trap

nodeAttrChan .1.3.6.1.4.1.4641.6.2.100
geDbChangeV
2Trap

NA

NA

node Attr ChangeDb Change Trap

node Attr
ChangeDb
Change Trap

nodeReadyV2
Trap

.1.3.6.1.4.1.4641.6.2.101

NA

NA

node Ready Trap

node Ready
Trap

bitsClkAttrCh
angeDbChang
eV2Trap

.1.3.6.1.4.1.4641.6.2.103

NA

NA

Bits clock change trap

Bits clock
change trap

nodeSwDnldD .1.3.6.1.4.1.4641.6.2.104
oneDbChange
V2Trap

NA

NA

node SwDnld Done Db Change Trap node SwDnld


Done Db
Change Trap

nodeSwDnldIn .1.3.6.1.4.1.4641.6.2.105
itDbChangeV2
Trap

NA

NA

node SwDnld Init Db Change Trap

node SwDnld
Init Db
Change Trap

fullyRedundan .1.3.6.1.4.1.4641.6.2.108
tDbChangeV2
Trap

NA

NA

fully Redundant Db Change Trap

fully
Redundant Db
Change Trap

operNonRedu .1.3.6.1.4.1.4641.6.2.110
ndantDbChang
eV2Trap

NA

NA

oper Non Redundant Db Change


Trap

oper Non
Redundant Db
Change Trap

nodeSwDnldA .1.3.6.1.4.1.4641.6.2.113
bortDbChange
V2Trap

NA

NA

node SwDnld Abort Db Change


Trap

node SwDnld
Abort Db
Change Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-206

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

nodeRestartIn
ProgDbChang
eV2Trap

.1.3.6.1.4.1.4641.6.2.114

NA

NA

node Restart InProg DbChange Trap node Restart


InProg
DbChange
Trap

nodeUpgradeB .1.3.6.1.4.1.4641.6.2.115
eginDbChange
V2Trap

NA

NA

node Upgrade Begin Db Change


Trap

node Upgrade
Begin Db
Change Trap

nodeEnterCon .1.3.6.1.4.1.4641.6.2.117
figRestrictedD
bChangeV2Tr
ap

NA

NA

node Enter Config Restricted Db


Change Trap

node Enter
Config
Restricted Db
Change Trap

nodeExitConfi .1.3.6.1.4.1.4641.6.2.118
gRestrictedDb
ChangeV2Tra
p

NA

NA

node Exit Config Restricted Db


Change Trap

node Exit
Config
Restricted Db
Change Trap

nodeEnterIsola .1.3.6.1.4.1.4641.6.2.119
tionDbChange
V2Trap

NA

NA

node Enter Isolation Db Change


Trap

node Enter
Isolation Db
Change Trap

nodeExitIsolat .1.3.6.1.4.1.4641.6.2.120
ionDbChange
V2Trap

NA

NA

node Exit Isolation Db Change Trap node Exit


Isolation Db
Change Trap

.1.3.6.1.4.1.4641.6.2.121

NA

NA

node Enter HwProg Db Change


Trap

nodeExitHwPr .1.3.6.1.4.1.4641.6.2.122
ogDbChangeV
2Trap

NA

NA

node Exit HwProg Db Change Trap node Exit


HwProg Db
Change Trap

nodeSltUpgdC .1.3.6.1.4.1.4641.6.2.123
hangeDbChan
geV2Trap

NA

NA

node Slt Upgd Change Db Change


Trap

node Slt Upgd


Change Db
Change Trap

NodeUsrAbtV
2Trap

.1.3.6.1.4.1.4641.6.2.124

NA

NA

Node Usr Abt Trap

Node Usr Abt


Trap

OntFivPmVoV .1.3.6.1.4.1.4641.6.2.125
2Trap

NA

NA

Ont Fiv PmVo Trap

Ont Fiv PmVo


Trap

TcaEventsV2T .1.3.6.1.4.1.4641.6.2.126
rap

NA

NA

Tca Events Trap

Tca Events
Trap

OltFivPmDaV
2Trap

.1.3.6.1.4.1.4641.6.2.127

NA

NA

Olt Fiv PmDa Trap

Olt Fiv PmDa


Trap

codeServAttrC .1.3.6.1.4.1.4641.6.2.200
hangeV2Trap

NA

NA

code Serv Attr Change Trap

code Serv Attr


Change Trap

mgmtIpAttrCh .1.3.6.1.4.1.4641.6.2.201
angeV2Trap

NA

NA

mgmt Ip Attr Change Trap

mgmt Ip Attr
Change Trap

nodeEnterHw
ProgDbChang
eV2Trap

Description

Short
Description

node Enter
HwProg Db
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-207

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

sysClkAttrCha .1.3.6.1.4.1.4641.6.2.202
ngeV2Trap

NA

NA

sys Clk Attr Change Trap

sys Clk Attr


Change Trap

acoButtonOnV .1.3.6.1.4.1.4641.6.2.208
2Trap

NA

NA

aco Button On Trap

aco Button On
Trap

invalidMgmtIp .1.3.6.1.4.1.4641.6.2.209
AddressV2Tra
p

NA

NA

invalid Mgmt IpAddress Trap

invalid Mgmt
IpAddress
Trap

dbServAttrCha .1.3.6.1.4.1.4641.6.2.210
ngeV2Trap

NA

NA

db Serv Attr Change Trap

db Serv Attr
Change Trap

powerLedMas
kChgV2Trap

.1.3.6.1.4.1.4641.6.2.213

NA

NA

power LedMask Chg Trap

power
LedMask Chg
Trap

transPowerCh
gV2Trap

.1.3.6.1.4.1.4641.6.2.216

NA

NA

trans Power Chg Trap

trans Power
Chg Trap

mgmtIpDown
V2Trap

.1.3.6.1.4.1.4641.6.2.218

NA

NA

mgmt Ip Down Trap

mgmt Ip
Down Trap

ntpHostAddD
bChangeV2Tr
ap

.1.3.6.1.4.1.4641.6.2.220

NA

NA

ntp Host Add DbChange Trap

ntp Host Add


DbChange
Trap

ntpHostModD
bChangeV2Tr
ap

.1.3.6.1.4.1.4641.6.2.221

NA

NA

ntp Host Mod DbChange Trap

ntp Host Mod


DbChange
Trap

ntpHostDelDb .1.3.6.1.4.1.4641.6.2.222
ChangeV2Tra
p

NA

NA

ntp Host Del DbChange Trap

ntp Host Del


DbChange
Trap

ntpAuthKeyDe .1.3.6.1.4.1.4641.6.2.224
lDbChangeV2
Trap

NA

NA

ntp Auth KeyDel DbChange Trap

ntp Auth
KeyDel
DbChange
Trap

msgDropDbCh .1.3.6.1.4.1.4641.6.2.225
angeV2Trap

NA

NA

msg Drop DbChange Trap

msg Drop
DbChange
Trap

globMgmtRed
irAttrChgDbC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.226

NA

NA

glob Mgmt Redir Attr ChgDb


Change Trap

glob Mgmt
Redir Attr
ChgDb
Change Trap

slHostAddDb
ChangeV2Tra
p

.1.3.6.1.4.1.4641.6.2.227

NA

NA

slHost Add DbChange Trap

slHost Add
DbChange
Trap

slHostModDb
ChangeV2Tra
p

.1.3.6.1.4.1.4641.6.2.228

NA

NA

slHost Mod DbChange Trap

slHost Mod
DbChange
Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-208

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

slHostDelDbC .1.3.6.1.4.1.4641.6.2.229
hangeV2Trap

NA

NA

slHost Del DbChange Trap

slHost Del
DbChange
Trap

slFileAddDbC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.230

NA

NA

slFile Add DbChange Trap

slFile Add
DbChange
Trap

slFileModDbC .1.3.6.1.4.1.4641.6.2.231
hangeV2Trap

NA

NA

slFile Mod DbChange Trap

slFile Mod
DbChange
Trap

slFileDelDbCh .1.3.6.1.4.1.4641.6.2.232
angeV2Trap

NA

NA

slFile Del DbChange Trap

slFile Del
DbChange
Trap

panelUnplugg
edV2Trap

.1.3.6.1.4.1.4641.6.2.233

NA

NA

panel Unplugged Trap

panel
Unplugged
Trap

globAccessMo .1.3.6.1.4.1.4641.6.2.234
deChgV2Trap

NA

NA

glob Access ModeChg Trap

glob Access
ModeChg
Trap

globUserAttrC .1.3.6.1.4.1.4641.6.2.235
hgV2Trap

NA

NA

glob User Attr Chg Trap

glob User Attr


Chg Trap

globLoginAttr
ChgV2Trap

.1.3.6.1.4.1.4641.6.2.236

NA

NA

glob Login Attr Chg Trap

glob Login
Attr Chg Trap

FileOpSuccV2 .1.3.6.1.4.1.4641.6.2.237
Trap

NA

NA

File OpSucc Trap

File OpSucc
Trap

FileOpFailV2
Trap

.1.3.6.1.4.1.4641.6.2.238

NA

NA

File OpFail Trap

File OpFail
Trap

NtpAuthV2Tra .1.3.6.1.4.1.4641.6.2.239
p

NA

NA

Ntp Auth Trap

Ntp Auth Trap

BitsAlmChgV
2Trap

.1.3.6.1.4.1.4641.6.2.240

NA

NA

Bits Alm Chg Trap

Bits Alm Chg


Trap

BitsClkUpV2
Trap

.1.3.6.1.4.1.4641.6.2.241

NA

NA

Bits ClkUp Trap

Bits ClkUp
Trap

BitsClkDnV2
Trap

.1.3.6.1.4.1.4641.6.2.242

NA

NA

Bits ClkDn Trap

Bits ClkDn
Trap

pcmApsGrpAd .1.3.6.1.4.1.4641.6.2.250
dedV2Trap

NA

NA

pcm Aps Grp Added Trap

pcm Aps Grp


Added Trap

pcmApsGrpDe .1.3.6.1.4.1.4641.6.2.251
letedV2Trap

NA

NA

pcm Aps Grp Deleted Trap

pcm Aps Grp


Deleted Trap

pcmApsGrpAt .1.3.6.1.4.1.4641.6.2.252
trChgDbChan
geV2Trap

NA

NA

pcm Aps Grp Attr ChgDb Change


Trap

pcm Aps Grp


Attr ChgDb
Change Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-209

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmApsGrpOn .1.3.6.1.4.1.4641.6.2.253
lineV2Trap

NA

NA

pcm Aps Grp Online Trap

pcm Aps Grp


Online Trap

pcmApsGrpOf .1.3.6.1.4.1.4641.6.2.254
flineV2Trap

NA

NA

pcm Aps Grp Offline Trap

pcm Aps Grp


Offline Trap

pcmApsMode
MismatchV2T
rap

.1.3.6.1.4.1.4641.6.2.255

NA

NA

pcm Aps Mode Mismatch Trap

pcm Aps
Mode
Mismatch
Trap

pcmApsChan
MismatchV2T
rap

.1.3.6.1.4.1.4641.6.2.256

NA

NA

pcm Aps Chan Mismatch Trap

pcm Aps Chan


Mismatch
Trap

pcmApsPSBF
V2Trap

.1.3.6.1.4.1.4641.6.2.257

NA

NA

pcm Aps PSBF Trap

pcm Aps
PSBF Trap

pcmApsFEPL
FV2Trap

.1.3.6.1.4.1.4641.6.2.258

NA

NA

pcm Aps FEPLF Trap

pcm Aps
FEPLF Trap

pcmApsChnA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.276

NA

NA

pcm Aps Chn Added Trap

pcm Aps Chn


Added Trap

pcmApsChnD
eletedV2Trap

.1.3.6.1.4.1.4641.6.2.277

NA

NA

pcm Aps Chn Deleted Trap

pcm Aps Chn


Deleted Trap

pcmApsChnAt .1.3.6.1.4.1.4641.6.2.278
trChgDbChan
geV2Trap

NA

NA

pcm Aps Chn Attr ChgDb Change


Trap

pcm Aps Chn


Attr ChgDb
Change Trap

pcmApsChnS
woDbChange
V2Trap

.1.3.6.1.4.1.4641.6.2.279

NA

NA

pcm Aps Chn SwoDb Change Trap

pcm Aps Chn


SwoDb
Change Trap

shelfAttrChan .1.3.6.1.4.1.4641.6.2.300
geDbChangeV
2Trap

NA

NA

shelf Attr ChangeDb Change Trap

shelf Attr
ChangeDb
Change Trap

FanShutDnV2
Trap

.1.3.6.1.4.1.4641.6.2.352

NA

NA

Fan Shut Dn Trap

Fan Shut Dn
Trap

env1V2Trap

.1.3.6.1.4.1.4641.6.2.400

NA

NA

env1 Trap

env1 Trap

env2V2Trap

.1.3.6.1.4.1.4641.6.2.401

NA

NA

env2 Trap

env2 Trap

env3V2Trap

.1.3.6.1.4.1.4641.6.2.402

NA

NA

env3 Trap

env3 Trap

env4V2Trap

.1.3.6.1.4.1.4641.6.2.403

NA

NA

env4 Trap

env4 Trap

TmFuseOpen
V2Trap

.1.3.6.1.4.1.4641.6.2.420

NA

NA

Tm Fuse Open Trap

Tm Fuse Open
Trap

FireCondV2Tr .1.3.6.1.4.1.4641.6.2.421
ap

NA

NA

Fire Cond Trap

Fire Cond
Trap

pcmVtAttrChg .1.3.6.1.4.1.4641.6.2.850
DbChangeV2T
rap

NA

NA

This event is set when a VT attribute pcm Vt Attr


changes
Chg Db
Change Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-210

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

pcmVtAdmin
ChgV2Trap_e
nabled ( 1 )

.1.3.6.1.4.1.4641.6.2.851

NA

pcmVtAdmin .1.3.6.1.4.1.4641.6.2.851
ChgV2Trap_di
sabled ( 2 )

Description

Short
Description

NA

This event is set when a VT admin


state changes.

pcm Vt Admin
Chg Trap

NA

NA

This event is set when a VT admin


state changes.

pcm Vt Admin
Chg Trap

pcmVtAdmin .1.3.6.1.4.1.4641.6.2.851
ChgV2Trap_te
sting ( 3 )

NA

NA

This event is set when a VT admin


state changes.

pcm Vt Admin
Chg Trap

pcmVtOnline
V2Trap

.1.3.6.1.4.1.4641.6.2.852

NA

NA

This event is set when a VT


becomes operational.

pcm Vt Online
Trap

pcmVtAISV2
Trap

.1.3.6.1.4.1.4641.6.2.853

NA

NA

This event is set when AIS alarm is pcm Vt AIS


detected, and is cleared when the
Trap
alarm is cleared.

pcmVtLOPV2
Trap

.1.3.6.1.4.1.4641.6.2.854

NA

NA

This event is set when LOP alarm is pcm Vt LOP


detected, and is cleared when the
Trap
alarm is cleared.

pcmVtUNEQ
V2Trap

.1.3.6.1.4.1.4641.6.2.855

NA

NA

This event is set when UNEQ alarm pcm Vt UNEQ


is detected, and is cleared when the Trap
alarm is cleared.

pcmVtPLMV2 .1.3.6.1.4.1.4641.6.2.856
Trap

NA

NA

This event is set when PLM alarm is pcm Vt PLM


detected, and is cleared when the
Trap
alarm is cleared

pcmVtRDIV2
Trap

.1.3.6.1.4.1.4641.6.2.857

NA

NA

This event is set when RDI alarm is pcm Vt RDI


detected, and is cleared when the
Trap
alarm is cleared.

pcmVtUASV2 .1.3.6.1.4.1.4641.6.2.858
Trap

NA

NA

This event is set when VT is


pcm Vt UAS
unavailable and is cleared when the Trap
VT is available.

pcmVtERDIV
2Trap

.1.3.6.1.4.1.4641.6.2.859

NA

NA

This event is set when ERDI alarm


is detected, and is cleared when the
alarm is cleared.

pcmVtFeUAS
V2Trap

.1.3.6.1.4.1.4641.6.2.860

NA

NA

This event is set when far end VT is pcm Vt Fe


unavailable and is cleared when the UAS Trap
far end VT is available.

pcmVtgAttrCh .1.3.6.1.4.1.4641.6.2.875
gDbChangeV2
Trap

NA

NA

This event is set when a VTG


attribute changes

pcm Vtg Attr


Chg Db
Change Trap

pcmDs3ChnAt .1.3.6.1.4.1.4641.6.2.900
trChgDbChan
geV2Trap

NA

NA

This event is set when a DS3/E3


channel attribute changes.

pcm Ds3 Chn


Attr Chg Db
Change Trap

pcm Vt ERDI
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-211

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

pcmDs3ChnC .1.3.6.1.4.1.4641.6.2.901
hnznChgDbCh
angeV2Trap

NA

NA

This event is set when a DS3/E3


channel channelization changes.

pcm Ds3 Chn


Chnzn Chg Db
Change Trap

pcmDs3ChnL
OSV2Trap

.1.3.6.1.4.1.4641.6.2.902

NA

NA

This event is set when LOS alarm is pcm Ds3 Chn


detected, and is cleared when the
LOS Trap
alarm is cleared.

pcmDs3ChnL
OFV2Trap

.1.3.6.1.4.1.4641.6.2.903

NA

NA

This event is set when LOF alarm is pcm Ds3 Chn


detected, andis cleared when the
LOF Trap
alarm is cleared.

pcmDs3ChnAI .1.3.6.1.4.1.4641.6.2.904
SV2Trap

NA

NA

This event is set when AIS alarm is pcm Ds3 Chn


detected, and is cleared when the
AIS Trap
alarm is cleared.

pcmDs3ChnR
AIV2Trap

.1.3.6.1.4.1.4641.6.2.905

NA

NA

This event is set when RAI alarm is pcm Ds3 Chn


RAI Trap
detected, and is cleared when the
alarm is cleared.

pcmDs3ChnLp .1.3.6.1.4.1.4641.6.2.906
bkV2Trap

NA

NA

This event is set when DS3/E3 is in pcm Ds3 Chn


Lpbk Trap
loopback, and is cleared when the
loopback is removed.

pcmDs3ChnBe .1.3.6.1.4.1.4641.6.2.907
rtV2Trap

NA

NA

This event is set when DS3/E3 is in pcm Ds3 Chn


BERT, and is cleared when the
Bert Trap
BERT is removed.

pcmDs3ChnU
ASV2Trap

.1.3.6.1.4.1.4641.6.2.908

NA

NA

This event is set when DS3/E3 is


pcm Ds3 Chn
unavailable and is cleared when the UAS Trap
DS3/E3 is available.

pcmDs3ChnL
CDV2Trap

.1.3.6.1.4.1.4641.6.2.909

NA

NA

This event is set when DS3/E3 LCD pcm Ds3 Chn


LCD Trap
alarm is detected, and is cleared
when the alarm is cleared.

pcmDs3ChnA .1.3.6.1.4.1.4641.6.2.910
dminChgV2Tr
ap

NA

NA

pcm Ds3 Chn Admin Chg Trap

pcm Ds3 Chn


Admin Chg
Trap

pcmDs3ChnO
nlineV2Trap

.1.3.6.1.4.1.4641.6.2.911

NA

NA

pcm Ds3 Chn Online Trap

pcm Ds3 Chn


Online Trap

pcmDs1AttrC .1.3.6.1.4.1.4641.6.2.925
hgDbChangeV
2Trap

NA

NA

This event is set when a DS1/E1


channel attribute changes.

pcm Ds1 Attr


Chg Db
Change Trap

pcmDs1Admin .1.3.6.1.4.1.4641.6.2.926
ChgV2Trap_e
nabled ( 1 )

NA

NA

This event is set when a DS1/E1


admin state changes.

pcm Ds1
Admin Chg
Trap

pcmDs1Admin .1.3.6.1.4.1.4641.6.2.926
ChgV2Trap_di
sabled ( 2 )

NA

NA

This event is set when a DS1/E1


admin state changes.

pcm Ds1
Admin Chg
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-212

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

pcmDs1Admin .1.3.6.1.4.1.4641.6.2.926
ChgV2Trap_te
sting ( 3 )

NA

NA

This event is set when a DS1/E1


admin state changes.

pcm Ds1
Admin Chg
Trap

pcmDs1Online .1.3.6.1.4.1.4641.6.2.927
V2Trap

NA

NA

This event is set when a DS1/E1


becomes operational.

pcm Ds1
Online Trap

pcmDs1LOFV .1.3.6.1.4.1.4641.6.2.928
2Trap

NA

NA

This event is set when LOF alarm is pcm Ds1 LOF


detected, and is cleared when the
Trap
alarm is cleared.

pcmDs1AISV
2Trap

.1.3.6.1.4.1.4641.6.2.929

NA

NA

This event is set when AIS alarm is pcm Ds1 AIS


detected, and is cleared when the
Trap
alarm is cleared.

pcmDs1RAIV
2Trap

.1.3.6.1.4.1.4641.6.2.930

NA

NA

This event is set when RAI alarm is pcm Ds1 RAI


detected, and is cleared when the
Trap
alarm is cleared.

pcmDs1Lpbk
V2Trap

.1.3.6.1.4.1.4641.6.2.931

NA

NA

This event is set when DS1/E1 is in pcm Ds1 Lpbk


Trap
loopback, and is cleared when the
loopback is removed.

pcmDs1BertV
2Trap

.1.3.6.1.4.1.4641.6.2.932

NA

NA

This event is set when DS1/E1 is in pcm Ds1 Bert


Trap
BERT, and is cleared when the
BERT is removed.

pcmDs1UASV .1.3.6.1.4.1.4641.6.2.933
2Trap

NA

NA

pcm Ds1 UAS


This event is set when DS1/E1 is
unavailable and is cleared when the Trap
DS1/E1 is available.

pcmDs1LCDV .1.3.6.1.4.1.4641.6.2.934
2Trap

NA

NA

This event is set when DS1/E1 LCD pcm Ds1 LCD


alarm is detected, and is cleared
Trap
when the alarm is cleared.

Ds1LOSV2Tra .1.3.6.1.4.1.4641.6.2.935
p

NA

NA

Ds1 LOS Trap

Ds1 LOS Trap

Ds1CRCV2Tr
ap

.1.3.6.1.4.1.4641.6.2.936

NA

NA

Ds1 CRC Trap

Ds1 CRC Trap

Ds1LOOPV2T .1.3.6.1.4.1.4641.6.2.937
rap

NA

NA

Ds1 LOOP Trap

Ds1 LOOP
Trap

ChBrtStartV2
Trap

.1.3.6.1.4.1.4641.6.2.938

NA

NA

Ch Brt Start Trap

Ch Brt Start
Trap

ChBrtStopV2
Trap

.1.3.6.1.4.1.4641.6.2.939

NA

NA

Ch Brt Stop Trap

Ch Brt Stop
Trap

BertBerrV2Tra .1.3.6.1.4.1.4641.6.2.940
p

NA

NA

Bert Berr Trap

Bert Berr Trap

pcmBndlAdde
dV2Trap

NA

NA

This event is set when a bundle


configuration is added.

pcm Bndl
Added Trap

.1.3.6.1.4.1.4641.6.2.950

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-213

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

pcmBndlDelet .1.3.6.1.4.1.4641.6.2.951
edV2Trap

NA

NA

This event is set when a bundle


configuration is deleted.

pcm Bndl
Deleted Trap

pcmBndlAttrC .1.3.6.1.4.1.4641.6.2.952
hgDbChangeV
2Trap

NA

NA

This event is set when a bundle


attribute changes.

pcm Bndl Attr


Chg Db
Change Trap

pcmBndlAdmi .1.3.6.1.4.1.4641.6.2.953
nChgV2Trap_
enabled ( 1 )

NA

NA

This event is set when a bundle


admin state changes.

pcm Bndl
Admin Chg
Trap

pcmBndlAdmi .1.3.6.1.4.1.4641.6.2.953
nChgV2Trap_
disabled ( 2 )

NA

NA

This event is set when a bundle


admin state changes.

pcm Bndl
Admin Chg
Trap

pcmBndlAdmi .1.3.6.1.4.1.4641.6.2.953
nChgV2Trap_t
esting ( 3 )

NA

NA

This event is set when a bundle


admin state changes.

pcm Bndl
Admin Chg
Trap

pcmBndlOnlin .1.3.6.1.4.1.4641.6.2.954
eV2Trap

NA

NA

This event is set when a bundle


becomes operational.

pcm Bndl
Online Trap

pcmBndlBert
V2Trap

.1.3.6.1.4.1.4641.6.2.955

NA

NA

This event is set when bundle is in


BERT, and is cleared when the
BERT is removed.

pcm Bndl Bert


Trap

pcmBertStartV .1.3.6.1.4.1.4641.6.2.956
2Trap

NA

NA

This event is set when BERT is


started on a bundle/DS3/DS1.

pcm Bert Start


Trap

pcmBertStopV .1.3.6.1.4.1.4641.6.2.957
2Trap

NA

NA

This event is set when BERT is


started on a bundle/DS3/DS1.

pcm Bert Stop


Trap

BndlNoMemV .1.3.6.1.4.1.4641.6.2.958
2Trap

NA

NA

Bndl No Mem
This event is set when a bundle is
out of FIFO memory, and is cleared Trap
when the bundle or any of its higher
level objects(i.e
PLM/port/channel/ds3/vt/ds1) are
admin disabled or when the
PLM/ULC is unplugged.

BndlLopsV2Tr .1.3.6.1.4.1.4641.6.2.959
ap

NA

NA

Bndl Lops Trap

Bndl Lops
Trap

BndlInitV2Tra .1.3.6.1.4.1.4641.6.2.960
p

NA

NA

Bndl Init Trap

Bndl Init Trap

BndlTermV2T .1.3.6.1.4.1.4641.6.2.961
rap

NA

NA

Bndl Term Trap

Bndl Term
Trap

BndlLpbkV2T .1.3.6.1.4.1.4641.6.2.962
rap

NA

NA

Bndl Lpbk Trap

Bndl Lpbk
Trap

pcmChannelA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.1000

NA

NA

This event is set when a channel


configuration is added.

pcm Channel
Added Trap

pcmChannelD
eletedV2Trap

.1.3.6.1.4.1.4641.6.2.1001

NA

NA

This event is set when a channel


configuration is deleted.

pcm Channel
Deleted Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-214

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

pcmChannelAt .1.3.6.1.4.1.4641.6.2.1002
trChgDbChan
geV2Trap

NA

NA

This event is set when a channel


attribute changes.

pcm Channel
Attr Chg Db
Change Trap

pcmChannelA .1.3.6.1.4.1.4641.6.2.1003
dminChgV2Tr
ap_enabled ( 1
)

NA

NA

This event is set when a channel


changes admin state.

pcm Channel
Admin Chg
Trap

pcmChannelA .1.3.6.1.4.1.4641.6.2.1003
dminChgV2Tr
ap_disabled ( 2
)

NA

NA

This event is set when a channel


changes admin state.

pcm Channel
Admin Chg
Trap

pcmChannelA .1.3.6.1.4.1.4641.6.2.1003
dminChgV2Tr
ap_testing ( 3 )

NA

NA

This event is set when a channel


changes admin state.

pcm Channel
Admin Chg
Trap

pcmChannelO
fflineV2Trap

.1.3.6.1.4.1.4641.6.2.1004

NA

NA

This event is set when a channel


becomes non operational.

pcm Channel
Offline Trap

pcmChannelO
nlineV2Trap

.1.3.6.1.4.1.4641.6.2.1005

NA

NA

This event is set when a channel


becomes operational.

pcm Channel
Online Trap

pcmChannelFa .1.3.6.1.4.1.4641.6.2.1006
iledV2Trap

NA

NA

This event is set when a channel


fails, and is cleared when the
channel becomes operational or
when the relevant module is
removed.

pcm Channel
Failed Trap

pcmPathAISV
2Trap

.1.3.6.1.4.1.4641.6.2.1007

NA

NA

This event is set when AIS alarm is pcm Path AIS


detected, and is cleared when the
Trap
alarm is cleared.

pcmPathRDIV .1.3.6.1.4.1.4641.6.2.1008
2Trap

NA

NA

This event is set when RDI alarm is pcm Path RDI


detected, and is cleared when the
Trap
alarm is cleared.

pcmPathERDI
V2Trap

.1.3.6.1.4.1.4641.6.2.1009

NA

NA

This event is set when ERDI alarm


is detected, and is cleared when the
alarm is cleared.

pcm Path
ERDI Trap

pcmPathLOPV .1.3.6.1.4.1.4641.6.2.1010
2Trap

NA

NA

This event is set when ERDI alarm


is detected, and is cleared when the
alarm is cleared.

pcm Path LOP


Trap

pcmPathUNE
QV2Trap

.1.3.6.1.4.1.4641.6.2.1011

NA

NA

This event is set when UNEQ alarm pcm Path


is detected, and is cleared when the UNEQ Trap
alarm is cleared.

pcmPathPLM
V2Trap

.1.3.6.1.4.1.4641.6.2.1012

NA

NA

pcm Path PLM Trap

pcm Path PLM


Trap

pcmPathDS3O .1.3.6.1.4.1.4641.6.2.1013
OFV2Trap

NA

NA

pcm Path DS3 OOF Trap

pcm Path DS3


OOF Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-215

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmPathDS3A .1.3.6.1.4.1.4641.6.2.1014
ISV2Trap

NA

NA

pcm Path DS3 AIS Trap

pcm Path DS3


AIS Trap

pcmPathDS3Y .1.3.6.1.4.1.4641.6.2.1015
ELV2Trap

NA

NA

pcm Path DS3 YEL Trap

pcm Path DS3


YEL Trap

pcmPathPLCP .1.3.6.1.4.1.4641.6.2.1016
LOFV2Trap

NA

NA

pcm Path PLCPLOF Trap

pcm Path
PLCPLOF
Trap

pcmPathPLCP .1.3.6.1.4.1.4641.6.2.1017
YELV2Trap

NA

NA

pcm Path PLCPYEL Trap

pcm Path
PLCPYEL
Trap

pcmPathNBET .1.3.6.1.4.1.4641.6.2.1018
V2Trap

NA

NA

pcm Path NBET Trap

pcm Path
NBET Trap

pcmPathFBET .1.3.6.1.4.1.4641.6.2.1019
V2Trap

NA

NA

pcm Path FBET Trap

pcm Path
FBET Trap

pcmPathLpbk
V2Trap

.1.3.6.1.4.1.4641.6.2.1020

NA

NA

pcm Path Lpbk Trap

pcm Path
Lpbk Trap

pcmPathTIMV .1.3.6.1.4.1.4641.6.2.1021
2Trap

NA

NA

pcm Path TIM Trap

pcm Path TIM


Trap

pcmPathXcon
AlmV2Trap

.1.3.6.1.4.1.4641.6.2.1022

NA

NA

pcm Path Xcon Alm Trap

pcm Path
Xcon Alm
Trap

pcmChannelM .1.3.6.1.4.1.4641.6.2.1023
appingChgDb
ChangeV2Tra
p

NA

NA

pcm Channel Mapping Chg Db


Change Trap

pcm Channel
Mapping Chg
Db Change
Trap

pcmLagAddD
bChangeV2Tr
ap

.1.3.6.1.4.1.4641.6.2.1050

NA

NA

pcm Lag Add Db Change Trap

pcm Lag Add


Db Change
Trap

pcmLagAttrCh .1.3.6.1.4.1.4641.6.2.1051
gDbChangeV2
Trap

NA

NA

pcm Lag Attr Chg Db Change Trap

pcm Lag Attr


Chg Db
Change Trap

pcmLagDelDb .1.3.6.1.4.1.4641.6.2.1052
ChangeV2Tra
p

NA

NA

pcm Lag Del Db Change Trap

pcm Lag Del


Db Change
Trap

pcmLagAdmin .1.3.6.1.4.1.4641.6.2.1053
ChgDbChange
V2Trap_enabl
ed ( 1 )

NA

NA

pcm Lag Admin Chg Db Change


Trap

pcm Lag
Admin Chg
Db Change
Trap

pcmLagAdmin .1.3.6.1.4.1.4641.6.2.1053
ChgDbChange
V2Trap_disabl
ed ( 2 )

NA

NA

pcm Lag Admin Chg Db Change


Trap

pcm Lag
Admin Chg
Db Change
Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-216

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

pcmLagAdmin .1.3.6.1.4.1.4641.6.2.1053
ChgDbChange
V2Trap_testin
g(3)

NA

NA

pcm Lag Admin Chg Db Change


Trap

pcm Lag
Admin Chg
Db Change
Trap

pcmLagOffLin .1.3.6.1.4.1.4641.6.2.1054
eDbChangeV2
Trap

NA

NA

pcm Lag OffLine Db Change Trap

pcm Lag
OffLine Db
Change Trap

pcmLagOnLin .1.3.6.1.4.1.4641.6.2.1055
eDbChangeV2
Trap

NA

NA

pcm Lag OnLine Db Change Trap

pcm Lag
OnLine Db
Change Trap

pcmLagMbrA .1.3.6.1.4.1.4641.6.2.1056
ddDbChangeV
2Trap

NA

NA

pcm Lag Mbr Add Db Change Trap pcm Lag Mbr


Add Db
Change Trap

.1.3.6.1.4.1.4641.6.2.1057

NA

NA

pcm Lag Mbr Del Db Change Trap

pcmLagMbrA .1.3.6.1.4.1.4641.6.2.1058
ddDoneDbCha
ngeV2Trap

NA

NA

pcm Lag Mbr Add Done Db Change pcm Lag Mbr


Trap
Add Done Db
Change Trap

.1.3.6.1.4.1.4641.6.2.1059

NA

NA

pcm Lag Mbr Del Done Db Change pcm Lag Mbr


Trap
Del Done Db
Change Trap

.1.3.6.1.4.1.4641.6.2.1060

NA

NA

Lacp Churn Trap

Lacp Churn
Trap

LacpMbrUpV
2Trap

.1.3.6.1.4.1.4641.6.2.1061

NA

NA

Lacp Mbr Up Trap

Lacp Mbr Up
Trap

LacpMbrDnV
2Trap

.1.3.6.1.4.1.4641.6.2.1062

NA

NA

Lacp Mbr Dn Trap

Lacp Mbr Dn
Trap

ifAddV2Trap

.1.3.6.1.4.1.4641.6.2.1100

NA

NA

if Add Trap

if Add Trap

ifDelV2Trap

.1.3.6.1.4.1.4641.6.2.1101

NA

NA

if Del Trap

if Del Trap

ifAttrChgDbC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.1103

NA

NA

if Attr Chg Db Change Trap

if Attr Chg Db
Change Trap

ifCacFailedV2 .1.3.6.1.4.1.4641.6.2.1104
Trap

NA

NA

if Cac Failed Trap

if Cac Failed
Trap

ifCacUnSubV
2Trap

.1.3.6.1.4.1.4641.6.2.1106

NA

NA

if Cac Un Sub Trap

if Cac Un Sub
Trap

ifSetUsrBwEx .1.3.6.1.4.1.4641.6.2.1109
cPhyBwV2Tra
p

NA

NA

if Set Usr Bw Exc Phy Bw Trap

if Set Usr Bw
Exc Phy Bw
Trap

pcmLagMbrD
elDbChangeV
2Trap

pcmLagMbrD
elDoneDbCha
ngeV2Trap
LacpChurnV2
Trap

pcm Lag Mbr


Del Db
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-217

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

ifClrUsrBwEx .1.3.6.1.4.1.4641.6.2.1110
cPhyBwV2Tra
p

NA

NA

if Clr Usr Bw Exc Phy Bw Trap

if Clr Usr Bw
Exc Phy Bw
Trap

brIfMaxMacR .1.3.6.1.4.1.4641.6.2.1111
eachedV2Trap

NA

NA

br If Max Mac Reached Trap

br If Max Mac
Reached Trap

brIfMaxMacR
elearnV2Trap

.1.3.6.1.4.1.4641.6.2.1112

NA

NA

br If Max Mac Relearn Trap

br If Max Mac
Relearn Trap

brIfMaxMacH .1.3.6.1.4.1.4641.6.2.1113
ighThreshV2T
rap

NA

NA

br If Max Mac High Thresh Trap

br If Max Mac
High Thresh
Trap

brIfMaxMacL .1.3.6.1.4.1.4641.6.2.1114
owThreshV2Tr
ap

NA

NA

br If Max Mac Low Thresh Trap

br If Max Mac
Low Thresh
Trap

ifAclChgV2Tr .1.3.6.1.4.1.4641.6.2.1115
ap

NA

NA

if Acl Chg Trap

if Acl Chg
Trap

ifQoSChgV2T .1.3.6.1.4.1.4641.6.2.1116
rap

NA

NA

if QoS Chg Trap

if QoS Chg
Trap

brIfStMacAdd .1.3.6.1.4.1.4641.6.2.1117
V2Trap

NA

NA

br If St Mac Add Trap

br If St Mac
Add Trap

brIfStMacDel
V2Trap

.1.3.6.1.4.1.4641.6.2.1118

NA

NA

br If St Mac Del Trap

br If St Mac
Del Trap

ipIfAddDoneV .1.3.6.1.4.1.4641.6.2.1119
2Trap

NA

NA

ip If Add Done Trap

ip If Add Done
Trap

greIfAddDone
V2Trap

.1.3.6.1.4.1.4641.6.2.1120

NA

NA

gre If Add Done Trap

gre If Add
Done Trap

greIfDelDone
V2Trap

.1.3.6.1.4.1.4641.6.2.1121

NA

NA

gre If Del Done Trap

gre If Del
Done Trap

IfMrrAdmV2T .1.3.6.1.4.1.4641.6.2.1122
rap

NA

NA

If Mrr Adm Trap

If Mrr Adm
Trap

IrbBulkChgV2 .1.3.6.1.4.1.4641.6.2.1123
Trap

NA

NA

Irb Bulk Chg Trap

Irb Bulk Chg


Trap

.1.3.6.1.4.1.4641.6.2.1124

NA

NA

if Arp Fl Chg Trap

if Arp Fl Chg
Trap

IfAtmNttChV
2Trap

.1.3.6.1.4.1.4641.6.2.1125

NA

NA

If Atm Ntt Ch Trap

If Atm Ntt Ch
Trap

cktOnLineV2
Trap

.1.3.6.1.4.1.4641.6.2.1202

NA

NA

ckt OnLine Trap

ckt OnLine
Trap

cktOffLineV2
Trap

.1.3.6.1.4.1.4641.6.2.1203

NA

NA

ckt OffLine Trap

ckt OffLine
Trap

Trap Name

Trap OID

ifArpFlChgV2
Trap

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-218

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

cktBulkChang
eV2Trap

.1.3.6.1.4.1.4641.6.2.1207

NA

NA

ckt Bulk Change Trap

ckt Bulk
Change Trap

cktGlobalChan .1.3.6.1.4.1.4641.6.2.1208
gedV2Trap

NA

NA

ckt Global Changed Trap

ckt Global
Changed Trap

CktMirTBCh

.1.3.6.1.4.1.4641.6.2.1209

NA

NA

Ckt Mir TBCh

Ckt Mir TBCh

CktMirSBCh

.1.3.6.1.4.1.4641.6.2.1210

NA

NA

Ckt Mir SBCh

Ckt Mir SBCh

cktBndlOnLin
eV2Trap

.1.3.6.1.4.1.4641.6.2.1250

NA

NA

ckt Bndl OnLine Trap

ckt Bndl
OnLine Trap

cktBndlOffLin .1.3.6.1.4.1.4641.6.2.1251
eV2Trap

NA

NA

ckt Bndl OffLine Trap

ckt Bndl
OffLine Trap

cktBndlAddM
brV2Trap

.1.3.6.1.4.1.4641.6.2.1252

NA

NA

ckt Bndl Add Mbr Trap

ckt Bndl Add


Mbr Trap

cktBndlDelMb .1.3.6.1.4.1.4641.6.2.1253
rV2Trap

NA

NA

ckt Bndl Del Mbr Trap

ckt Bndl Del


Mbr Trap

cktBndlBulkC
hangeV2Trap

.1.3.6.1.4.1.4641.6.2.1254

NA

NA

ckt Bndl Bulk Change Trap

ckt Bndl Bulk


Change Trap

cktBndlGlobal .1.3.6.1.4.1.4641.6.2.1255
ChangedV2Tr
ap

NA

NA

ckt Bndl Global Changed Trap

ckt Bndl
Global
Changed Trap

CBMirBulkV2 .1.3.6.1.4.1.4641.6.2.1256
Trap

NA

NA

CB Mir Bulk Trap

CB Mir Bulk
Trap

evaEventAckV .1.3.6.1.4.1.4641.6.2.1400
2Trap

NA

NA

eva Event Ack Trap

eva Event Ack


Trap

evaBulkAckV
2Trap

.1.3.6.1.4.1.4641.6.2.1401

NA

NA

eva Bulk Ack Trap

eva Bulk Ack


Trap

evaUnackMin
orV2Trap

.1.3.6.1.4.1.4641.6.2.1403

NA

NA

eva Unack Minor Trap

eva Unack
Minor Trap

evaUnackMajo .1.3.6.1.4.1.4641.6.2.1404
rV2Trap

NA

NA

eva Unack Major Trap

eva Unack
Major Trap

evaEventPara .1.3.6.1.4.1.4641.6.2.1407
mChangeV2Tr
ap

NA

NA

eva Event Param Change Trap

eva Event
Param Change
Trap

evaHistWrapV .1.3.6.1.4.1.4641.6.2.1408
2Trap

NA

NA

eva Hist Wrap Trap

eva Hist Wrap


Trap

evaRestartV2T .1.3.6.1.4.1.4641.6.2.1409
rap

NA

NA

eva Restart Trap

eva Restart
Trap

evaSeqWrapV
2Trap

.1.3.6.1.4.1.4641.6.2.1410

NA

NA

eva Seq Wrap Trap

eva Seq Wrap


Trap

evaConfV2Tra .1.3.6.1.4.1.4641.6.2.1411
p

NA

NA

eva Conf Trap

eva Conf Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-219

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

evaUnresolved .1.3.6.1.4.1.4641.6.2.1412
V2Trap

NA

NA

eva Un resolved Trap

eva Un
resolved Trap

EnvAlmCfgV2 .1.3.6.1.4.1.4641.6.2.1413
Trap

NA

NA

Env Alm Cfg Trap

Env Alm Cfg


Trap

EvtClrAlmV2
Trap

.1.3.6.1.4.1.4641.6.2.1414

NA

NA

Evt Clr Alm Trap

Evt Clr Alm


Trap

mplsLspAdde
dV2Trap

.1.3.6.1.4.1.4641.6.2.1900

NA

NA

mpls Lsp Added Trap

mpls Lsp
Added Trap

mplsLspDelete .1.3.6.1.4.1.4641.6.2.1901
dV2Trap

NA

NA

mpls Lsp Deleted Trap

mpls Lsp
Deleted Trap

mplsLspAttrC
hangeDbChan
geV2Trap

.1.3.6.1.4.1.4641.6.2.1902

NA

NA

mpls Lsp Attr Change Db Change


Trap

mpls Lsp Attr


Change Db
Change Trap

mplsLspStand
byV2Trap

.1.3.6.1.4.1.4641.6.2.1907

NA

NA

mpls Lsp Standby Trap

mpls Lsp
Standby Trap

mplsLspForce
PathV2Trap

.1.3.6.1.4.1.4641.6.2.1916

NA

NA

mpls Lsp Force Path Trap

mpls Lsp
Force Path
Trap

mplsLspCfgU
pdateV2Trap

.1.3.6.1.4.1.4641.6.2.1917

NA

NA

mpls Lsp Cfg Update Trap

mpls Lsp Cfg


Update Trap

mplsLspUpdat .1.3.6.1.4.1.4641.6.2.1918
edV2Trap

NA

NA

mpls Lsp Updated Trap

mpls Lsp
Updated Trap

mplsLspOptim .1.3.6.1.4.1.4641.6.2.1919
izedDbChange
V2Trap

NA

NA

mpls Lsp Optimized Db Change


Trap

mpls Lsp
Optimized Db
Change Trap

mplsLspRemo
teDtChgDbCh
angeV2Trap

.1.3.6.1.4.1.4641.6.2.1920

NA

NA

mpls Lsp Remote Dt Chg Db


Change Trap

mpls Lsp
Remote Dt
Chg Db
Change Trap

LspBAttrChV
2Trap

.1.3.6.1.4.1.4641.6.2.1921

NA

NA

Lsp B Attr Ch Trap

Lsp B Attr Ch
Trap

LspBAdmChV .1.3.6.1.4.1.4641.6.2.1922
2Trap

NA

NA

Lsp B Adm Ch Trap

Lsp B Adm Ch
Trap

dhcpRelayIpF .1.3.6.1.4.1.4641.6.2.2000
wdProtUdpPor
tAddV2Trap

NA

NA

dhcp Relay Ip Fwd Prot Udp Port


Add Trap

dhcp Relay Ip
Fwd Prot Udp
Port Add Trap

dhcpRelayIpF .1.3.6.1.4.1.4641.6.2.2001
wdProtUdpPor
tDelV2Trap

NA

NA

dhcp Relay Ip Fwd Prot Udp Port


Del Trap

dhcp Relay Ip
Fwd Prot Udp
Port Del Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-220

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

dhcpRelayInst .1.3.6.1.4.1.4641.6.2.2002
AttrChgV2Tra
p

NA

NA

dhcp Relay Inst Attr Chg Trap

dhcp Relay
Inst Attr Chg
Trap

dhcpRelayIpH .1.3.6.1.4.1.4641.6.2.2003
elperAddrAdd
V2Trap

NA

NA

dhcp Relay Ip Helper Addr Add


Trap

dhcp Relay Ip
Helper Addr
Add Trap

dhcpRelayIpH .1.3.6.1.4.1.4641.6.2.2004
elperAddrDel
V2Trap

NA

NA

dhcp Relay Ip Helper Addr Del Trap dhcp Relay Ip


Helper Addr
Del Trap

dhcpRelayIntf .1.3.6.1.4.1.4641.6.2.2005
AttrChgV2Tra
p

NA

NA

dhcp Relay Intf Attr Chg Trap

dhcp Relay
Intf Attr Chg
Trap

dhcpRelayIntf .1.3.6.1.4.1.4641.6.2.2006
AdminStateCh
gV2Trap

NA

NA

dhcp Relay Intf Admin State Chg


Trap

dhcp Relay
Intf Admin
State Chg Trap

dhcpRelayIntf
OnlineV2Trap

.1.3.6.1.4.1.4641.6.2.2007

NA

NA

dhcp Relay Intf Online Trap

dhcp Relay
Intf Online
Trap

dhcpRelayIntf .1.3.6.1.4.1.4641.6.2.2008
OfflineV2Trap

NA

NA

dhcp Relay Intf Offline Trap

dhcp Relay
Intf Offline
Trap

PlAdrThrV2Tr .1.3.6.1.4.1.4641.6.2.2009
ap

NA

NA

Pl Adr Thr Trap

Pl Adr Thr
Trap

SrvAdrThrV2
Trap

.1.3.6.1.4.1.4641.6.2.2010

NA

NA

Srv Adr Thr Trap

Srv Adr Thr


Trap

dbBupV2Trap

.1.3.6.1.4.1.4641.6.2.2200

NA

NA

db Bup Trap

db Bup Trap

dbResV2Trap

.1.3.6.1.4.1.4641.6.2.2201

NA

NA

db Res Trap

db Res Trap

dbCopyV2Tra
p

.1.3.6.1.4.1.4641.6.2.2202

NA

NA

db Copy Trap

db Copy Trap

dbAbtV2Trap

.1.3.6.1.4.1.4641.6.2.2203

NA

NA

db Abt Trap

db Abt Trap

dbInvV2Trap

.1.3.6.1.4.1.4641.6.2.2204

NA

NA

db Inv Trap

db Inv Trap

dbConDelV2T .1.3.6.1.4.1.4641.6.2.2205
rap

NA

NA

db Con Del Trap

db Con Del
Trap

dbConChgV2
Trap

.1.3.6.1.4.1.4641.6.2.2206

NA

NA

db Con Chg Trap

db Con Chg
Trap

dbValV2Trap

.1.3.6.1.4.1.4641.6.2.2207

NA

NA

db Val Trap

db Val Trap

dbBakEndV2T .1.3.6.1.4.1.4641.6.2.2208
rap

NA

NA

db Bak End Trap

db Bak End
Trap

dbResEndV2T .1.3.6.1.4.1.4641.6.2.2209
rap

NA

NA

db Res End Trap

db Res End
Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-221

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

dbCopyEndV2 .1.3.6.1.4.1.4641.6.2.2210
Trap

NA

NA

db Copy End Trap

db Copy End
Trap

dbValidateEnd .1.3.6.1.4.1.4641.6.2.2211
V2Trap

NA

NA

db Validate End Trap

db Validate
End Trap

dbSetConfigE
ndV2Trap

.1.3.6.1.4.1.4641.6.2.2212

NA

NA

db Set Config End Trap

db Set Config
End Trap

dbConfigDesc
ChgV2Trap

.1.3.6.1.4.1.4641.6.2.2213

NA

NA

db Config Desc Chg Trap

db Config
Desc Chg Trap

dbChecksumV .1.3.6.1.4.1.4641.6.2.2214
2Trap

NA

NA

db Checksum Trap

db Checksum
Trap

dbNoMarkerC
fgV2Trap

.1.3.6.1.4.1.4641.6.2.2215

NA

NA

db No Marker Cfg Trap

db No Marker
Cfg Trap

dbNotUpToDa .1.3.6.1.4.1.4641.6.2.2216
teCfgV2Trap

NA

NA

db Not Up To Date Cfg Trap

db Not Up To
Date Cfg Trap

snmpColdStart .1.3.6.1.4.1.4641.6.2.2300
V2Trap

NA

NA

snmp Cold Start Trap

tellabs snmp
Cold Start
Trap

snmpWarmSta .1.3.6.1.4.1.4641.6.2.2301
rtV2Trap

NA

NA

snmp Warm Start Trap

tellabs snmp
Warm Start
Trap

snmpLinkDow .1.3.6.1.4.1.4641.6.2.2302
nV2Trap

NA

NA

snmp Link Down Trap

tellabs snmp
Link Down
Trap

snmpAuthFail
V2Trap

.1.3.6.1.4.1.4641.6.2.2304

NA

NA

snmp Auth Fail Trap

tellabs snmp
Auth Fail Trap

snmpCommun .1.3.6.1.4.1.4641.6.2.2305
ityAddV2Trap

NA

NA

snmp Community Add Trap

snmp
Community
Add Trap

snmpCommun .1.3.6.1.4.1.4641.6.2.2306
ityDelV2Trap

NA

NA

snmp Community Del Trap

snmp
Community
Del Trap

snmpAttrChan .1.3.6.1.4.1.4641.6.2.2307
geDbChangeV
2Trap

NA

NA

snmp Attr Change Db Change Trap

snmp Attr
Change Db
Change Trap

trapClientAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.2308

NA

NA

trap Client Add Trap

trap Client
Add Trap

trapClientDel
V2Trap

.1.3.6.1.4.1.4641.6.2.2309

NA

NA

trap Client Del Trap

trap Client Del


Trap

trapAttrChang .1.3.6.1.4.1.4641.6.2.2310
eDbChangeV2
Trap

NA

NA

trap Attr Change Db Change Trap

trap Attr
Change Db
Change Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-222

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

snmpTargAddr .1.3.6.1.4.1.4641.6.2.2311
AddV2Trap

NA

NA

snmp Targ Addr Add Trap

snmp Targ
Addr Add
Trap

snmpTargAddr .1.3.6.1.4.1.4641.6.2.2312
DelV2Trap

NA

NA

snmp Targ Addr Del Trap

snmp Targ
Addr Del Trap

snmpAccessD
enyV2Trap

.1.3.6.1.4.1.4641.6.2.2313

NA

NA

snmp Access Deny Trap

snmp Access
Deny Trap

snmpV3Engin .1.3.6.1.4.1.4641.6.2.2314
eIdAttrChange
V2Trap

NA

NA

snmp V3 Engine Id Attr Change


Trap

snmp V3
Engine Id Attr
Change Trap

snmpV3Conte
xtAddV2Trap

.1.3.6.1.4.1.4641.6.2.2315

NA

NA

snmp V3 Context Add Trap

snmp V3
Context Add
Trap

snmpv3Contex .1.3.6.1.4.1.4641.6.2.2316
tDelV2Trap

NA

NA

snmp v3 Context Del Trap

snmp v3
Context Del
Trap

snmpV3Securi .1.3.6.1.4.1.4641.6.2.2317
tyAddV2Trap

NA

NA

snmp V3 Security Add Trap

snmp V3
Security Add
Trap

snmpV3Securi .1.3.6.1.4.1.4641.6.2.2318
tyDelV2Trap

NA

NA

snmp V3 Security Del Trap

snmp V3
Security Del
Trap

snmpV3Securi .1.3.6.1.4.1.4641.6.2.2319
tyAttrChangeD
bChangeV2Tr
ap

NA

NA

snmp V3 Security Attr Change Db


Change Trap

snmp V3
Security Attr
Change Db
Change Trap

snmpV3Acces
sAddV2Trap

.1.3.6.1.4.1.4641.6.2.2320

NA

NA

snmp V3 Access Add Trap

snmp V3
Access Add
Trap

snmpV3Acces
sDelV2Trap

.1.3.6.1.4.1.4641.6.2.2321

NA

NA

snmp V3 Access Del Trap

snmp V3
Access Del
Trap

snmpV3Acces
sAttrChangeD
bChangeV2Tr
ap

.1.3.6.1.4.1.4641.6.2.2322

NA

NA

snmp V3 Access Attr Change Db


Change Trap

snmp V3
Access Attr
Change Db
Change Trap

snmpV3UserA .1.3.6.1.4.1.4641.6.2.2323
ddV2Trap

NA

NA

snmp V3 User Add Trap

snmp V3 User
Add Trap

snmpV3UserD .1.3.6.1.4.1.4641.6.2.2324
elV2Trap

NA

NA

snmp V3 User Del Trap

snmp V3 User
Del Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-223

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

snmpV3UserA .1.3.6.1.4.1.4641.6.2.2325
ttrChangeDbC
hangeV2Trap

NA

NA

snmp V3 User Attr Change Db


Change Trap

snmp V3 User
Attr Change
Db Change
Trap

snmpV3TargP .1.3.6.1.4.1.4641.6.2.2326
aramsAddV2T
rap

NA

NA

snmp V3 Targ Params Add Trap

snmp V3 Targ
Params Add
Trap

snmpV3TargP .1.3.6.1.4.1.4641.6.2.2327
aramsDelV2Tr
ap

NA

NA

snmp V3 Targ Params Del Trap

snmp V3 Targ
Params Del
Trap

snmpV3TargP
aramsAttrCha
ngeDbChange
V2Trap

.1.3.6.1.4.1.4641.6.2.2328

NA

NA

snmp V3 Targ Params Attr Change


Db Change Trap

snmp V3 Targ
Params Attr
Change Db
Change Trap

CtlAttrChgV2
Trap

.1.3.6.1.4.1.4641.6.2.2329

NA

NA

Ctl Attr Chg Trap

Ctl Attr Chg


Trap

cliLoginFailur
eV2Trap

.1.3.6.1.4.1.4641.6.2.2400

NA

NA

cli Login Failure Trap

cli Login
Failure Trap

cLILoginV2Tr .1.3.6.1.4.1.4641.6.2.2401
ap

NA

NA

cLI Login Trap

cLI Login
Trap

cLILogoutV2
Trap

.1.3.6.1.4.1.4641.6.2.2402

NA

NA

cLI Logout Trap

cLI Logout
Trap

cLIPwdExpV2 .1.3.6.1.4.1.4641.6.2.2403
Trap

NA

NA

cLI Pwd Exp Trap

cLI Pwd Exp


Trap

cLIPwdWarnV .1.3.6.1.4.1.4641.6.2.2404
2Trap

NA

NA

cLI Pwd Warn Trap

cLI Pwd Warn


Trap

cLILockOutV
2Trap

.1.3.6.1.4.1.4641.6.2.2405

NA

NA

cLI Lock Out Trap

cLI Lock Out


Trap

UnLockV2Tra
p

.1.3.6.1.4.1.4641.6.2.2406

NA

NA

Un Lock Trap

Un Lock Trap

SesInThresV2
Trap

.1.3.6.1.4.1.4641.6.2.2407

NA

NA

Ses In Thres Trap

Ses In Thres
Trap

temGlblAttrCh .1.3.6.1.4.1.4641.6.2.2600
angeDbChang
eV2Trap

NA

NA

tem Glbl Attr Change Change Trap

tem Glbl Attr


Change
Change Trap

temCSPFClrC .1.3.6.1.4.1.4641.6.2.2601
ountersV2Trap

NA

NA

tem CSPF Clr Counters Trap

tem CSPF Clr


Counters Trap

temIfAttrChan .1.3.6.1.4.1.4641.6.2.2602
geDbChangeV
2Trap

NA

NA

tem If Attr Change Db Change Trap tem If Attr


Change Db
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-224

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

temLevelAdmi .1.3.6.1.4.1.4641.6.2.2606
nChangeV2Tr
ap_enabled ( 1
)

NA

NA

tem Level Admin Change Trap

tem Level
Admin
Change Trap

temLevelAdmi .1.3.6.1.4.1.4641.6.2.2606
nChangeV2Tr
ap_disabled(2)

NA

NA

tem Level Admin Change Trap

tem Level
Admin
Change Trap

temLevelAdmi .1.3.6.1.4.1.4641.6.2.2606
nChangeV2Tr
ap_testing ( 3 )

NA

NA

tem Level Admin Change Trap

tem Level
Admin
Change Trap

temIsisIfL1On .1.3.6.1.4.1.4641.6.2.2607
lineV2Trap

NA

NA

tem Isis If L1 Online Trap

tem Isis If L1
Online Trap

temIsisIfL1Off .1.3.6.1.4.1.4641.6.2.2608
lineV2Trap

NA

NA

tem Isis If L1 Offline Trap

tem Isis If L1
Offline Trap

temIsisIfL2On .1.3.6.1.4.1.4641.6.2.2609
lineV2Trap

NA

NA

tem Isis If L2 Online Trap

tem Isis If L2
Online Trap

temIsisIfL2Off .1.3.6.1.4.1.4641.6.2.2610
lineV2Trap

NA

NA

tem Isis If L2 Offline Trap

tem Isis If L2
Offline Trap

isisCircAdmin .1.3.6.1.4.1.4641.6.2.2700
StateChgDbCh
angeV2Trap_e
nabled ( 1 )

NA

NA

isis Circ Admin State Chg Db


Change Trap

isis Circ
Admin State
Chg Db
Change Trap

isisCircAdmin .1.3.6.1.4.1.4641.6.2.2700
StateChgDbCh
angeV2Trap_d
isabled ( 2 )

NA

NA

isis Circ Admin State Chg Db


Change Trap

isis Circ
Admin State
Chg Db
Change Trap

isisCircAdmin .1.3.6.1.4.1.4641.6.2.2700
StateChgDbCh
angeV2Trap_t
esting ( 3 )

NA

NA

isis Circ Admin State Chg Db


Change Trap

isis Circ
Admin State
Chg Db
Change Trap

isisCircAttrCh .1.3.6.1.4.1.4641.6.2.2701
gDbChangeV2
Trap

NA

NA

isis Circ Attr Chg Db Change Trap

isis Circ Attr


Chg Db
Change Trap

isisCircLevelA .1.3.6.1.4.1.4641.6.2.2702
ttrChgDbChan
geV2Trap

NA

NA

isis Circ Level Attr Chg Db Change isis Circ Level


Trap
Attr Chg Db
Change Trap

isisCircClearA .1.3.6.1.4.1.4641.6.2.2703
ctionV2Trap

NA

NA

isis Circ Clear Action Trap

isis Circ Clear


Action Trap

isisGlblAdmin .1.3.6.1.4.1.4641.6.2.2704
StateChgDbCh
angeV2Trap_e
nabled ( 1 )

NA

NA

isis Glbl Admin State Chg Db


Change Trap

isis Glbl
Admin State
Chg Db
Change Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-225

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

Short
Description

isisGlblAdmin .1.3.6.1.4.1.4641.6.2.2704
StateChgDbCh
angeV2Trap_d
isabled ( 2 )

NA

NA

isis Glbl Admin State Chg Db


Change Trap

isis Glbl
Admin State
Chg Db
Change Trap

isisGlblAdmin .1.3.6.1.4.1.4641.6.2.2704
StateChgDbCh
angeV2Trap_t
esting ( 3 )

NA

NA

isis Glbl Admin State Chg Db


Change Trap

isis Glbl
Admin State
Chg Db
Change Trap

isisGlblAttrCh .1.3.6.1.4.1.4641.6.2.2705
gDbChangeV2
Trap

NA

NA

isis Glbl Attr Chg Db Change Trap

isis Glbl Attr


Chg Db
Change Trap

isisGlblLevel
AttrChgDbCh
angeV2Trap

.1.3.6.1.4.1.4641.6.2.2706

NA

NA

isis Glbl Level Attr Chg Db Change isis Glbl Level


Trap
Attr Chg Db
Change Trap

isisGlblClearA .1.3.6.1.4.1.4641.6.2.2707
ctionV2Trap

NA

NA

isis Glbl Clear Action Trap

isis Glbl Clear


Action Trap

isisAreaAddV
2Trap

.1.3.6.1.4.1.4641.6.2.2708

NA

NA

isis Area Add Trap

isis Area Add


Trap

isisAreaDelV2 .1.3.6.1.4.1.4641.6.2.2709
Trap

NA

NA

isis Area Del Trap

isis Area Del


Trap

isisRedistAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.2710

NA

NA

isis Redist Add Trap

isis Redist
Add Trap

isisRedistAttr
ChgV2Trap

.1.3.6.1.4.1.4641.6.2.2711

NA

NA

isis Redist Attr Chg Trap

isis Redist
Attr Chg Trap

isisRedistDelV .1.3.6.1.4.1.4641.6.2.2712
2Trap

NA

NA

isis Redist Del Trap

isis Redist Del


Trap

isisSummAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.2713

NA

NA

isis Summ Add Trap

isis Summ
Add Trap

isisSummAttr .1.3.6.1.4.1.4641.6.2.2714
ChgDbChange
V2Trap

NA

NA

isis Summ Attr Chg Db Change Trap isis Summ


Attr Chg Db
Change Trap

isisSummDel
V2Trap

.1.3.6.1.4.1.4641.6.2.2715

NA

NA

isis Summ Del Trap

isis Summ Del


Trap

isisCircOnline
V2Trap

.1.3.6.1.4.1.4641.6.2.2720

NA

NA

isis Circ Online Trap

isis Circ
Online Trap

isisCircOffline .1.3.6.1.4.1.4641.6.2.2721
V2Trap

NA

NA

isis Circ Offline Trap

isis Circ
Offline Trap

isisGlblOnline .1.3.6.1.4.1.4641.6.2.2722
V2Trap

NA

NA

isis Glbl Online Trap

isis Glbl
Online Trap

isisGlblOffline .1.3.6.1.4.1.4641.6.2.2723
V2Trap

NA

NA

isis Glbl Offline Trap

isis Glbl
Offline Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-226

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

isisHelloAuth
FailV2Trap

.1.3.6.1.4.1.4641.6.2.2724

NA

NA

isis Hello Auth Fail Trap

isis Hello
Auth Fail Trap

isisAdjRejecte .1.3.6.1.4.1.4641.6.2.2725
dV2Trap

NA

NA

isis Adj Rejected Trap

isis Adj
Rejected Trap

isisIdLenMism .1.3.6.1.4.1.4641.6.2.2726
atchesV2Trap

NA

NA

isis Id Len Mismatches Trap

isis Id Len
Mismatches
Trap

isisL1DisChg
V2Trap

.1.3.6.1.4.1.4641.6.2.2727

NA

NA

isis L1 Dis Chg Trap

isis L1 Dis
Chg Trap

isisL2DisChg
V2Trap

.1.3.6.1.4.1.4641.6.2.2728

NA

NA

isis L2 Dis Chg Trap

isis L2 Dis
Chg Trap

isisNbrStateCh .1.3.6.1.4.1.4641.6.2.2729
gV2Trap

NA

NA

isis Nbr State Chg Trap

isis Nbr State


Chg Trap

isisGlblAuthF
ailV2Trap

.1.3.6.1.4.1.4641.6.2.2730

NA

NA

isis Glbl Auth Fail Trap

isis Glbl Auth


Fail Trap

isisAreaMisma .1.3.6.1.4.1.4641.6.2.2731
tchV2Trap

NA

NA

isis Area Mismatch Trap

isis Area
Mismatch
Trap

isisAttachState .1.3.6.1.4.1.4641.6.2.2732
ChgV2Trap

NA

NA

isis Attach State Chg Trap

isis Attach
State Chg Trap

isisMaxAreaA .1.3.6.1.4.1.4641.6.2.2733
ddrMismatchV
2Trap

NA

NA

isis Max Area Addr Mismatch Trap isis Max Area


Addr
Mismatch
Trap

isisL1DbOverl .1.3.6.1.4.1.4641.6.2.2734
oadStateChgV
2Trap

NA

NA

isis L1 Db Overload State Chg Trap isis L1 Db


Overload State
Chg Trap

isisL2DbOverl .1.3.6.1.4.1.4641.6.2.2735
oadStateChgV
2Trap

NA

NA

isis L2 Db Overload State Chg Trap isis L2 Db


Overload State
Chg Trap

isisManAreaD
ropFromArea
V2Trap

.1.3.6.1.4.1.4641.6.2.2736

NA

NA

isis Man Area Drop From Area Trap isis Man Area
Drop From
Area Trap

isisCorrLspDe .1.3.6.1.4.1.4641.6.2.2737
tectedV2Trap

NA

NA

isis Corr Lsp Detected Trap

isis Corr Lsp


Detected Trap

isisAttToExcM .1.3.6.1.4.1.4641.6.2.2738
axSeqNumber
V2Trap

NA

NA

isis Att To Exc Max Seq Number


Trap

isis Att To Exc


Max Seq
Number Trap

isisSeqNumSk .1.3.6.1.4.1.4641.6.2.2739
ipV2Trap

NA

NA

isis Seq Num Skip Trap

isis Seq Num


Skip Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-227

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

isisOwnLspPu
rgeV2Trap

.1.3.6.1.4.1.4641.6.2.2740

NA

NA

isis Own Lsp Purge Trap

isis Own Lsp


Purge Trap

mplsPathAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.2800

NA

NA

mpls Path Add Trap

mpls Path Add


Trap

mplsPathDelV .1.3.6.1.4.1.4641.6.2.2801
2Trap

NA

NA

mpls Path Del Trap

mpls Path Del


Trap

mplsPathChV2 .1.3.6.1.4.1.4641.6.2.2802
Trap

NA

NA

mpls Path Ch Trap

mpls Path Ch
Trap

mplsHopAddV .1.3.6.1.4.1.4641.6.2.2803
2Trap

NA

NA

mpls Hop Add Trap

mpls Hop Add


Trap

mplsHopSynV .1.3.6.1.4.1.4641.6.2.2804
2Trap

NA

NA

mpls Hop Syn Trap

mpls Hop Syn


Trap

mplsHopChgV .1.3.6.1.4.1.4641.6.2.2805
2Trap

NA

NA

mpls Hop Chg Trap

mpls Hop Chg


Trap

mplsLsrIdCha
ngedV2Trap

.1.3.6.1.4.1.4641.6.2.2806

NA

NA

mpls Lsr Id Changed Trap

mpls Lsr Id
Changed Trap

mplsAttriChan .1.3.6.1.4.1.4641.6.2.2807
gedV2Trap

NA

NA

mpls Attri Changed Trap

mpls Attri
Changed Trap

mplsGlobalCh
angedV2Trap

.1.3.6.1.4.1.4641.6.2.2809

NA

NA

mpls Global Changed Trap

mpls Global
Changed Trap

mplsLspGlblA .1.3.6.1.4.1.4641.6.2.2810
ttrChgV2Trap

NA

NA

mpls Lsp Glbl Attr Chg Trap

mpls Lsp Glbl


Attr Chg Trap

mplsRsvpIntf
AddV2Trap

.1.3.6.1.4.1.4641.6.2.2900

NA

NA

mpls Rsvp Intf Add Trap

mpls Rsvp Intf


Add Trap

mplsRsvpIntf
DelV2Trap

.1.3.6.1.4.1.4641.6.2.2901

NA

NA

mpls Rsvp Intf Del Trap

mpls Rsvp Intf


Del Trap

mplsRsvpIntf .1.3.6.1.4.1.4641.6.2.2903
AttrChgV2Tra
p

NA

NA

mpls Rsvp Intf Attr Chg Trap

mpls Rsvp Intf


Attr Chg Trap

mplsRsvpGlbl .1.3.6.1.4.1.4641.6.2.2906
AttrChgV2Tra
p

NA

NA

mpls Rsvp Glbl Attr Chg Trap

mpls Rsvp
Glbl Attr Chg
Trap

rtInMaxRtMax .1.3.6.1.4.1.4641.6.2.3000
ThresholdV2T
rap

NA

NA

rt In Max Rt Max Threshold Trap

rt In Max Rt
Max
Threshold
Trap

rtInMaxRtMin .1.3.6.1.4.1.4641.6.2.3001
ThresholdV2T
rap

NA

NA

rt In Max Rt Min Threshold Trap

rt In Max Rt
Min Threshold
Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-228

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

rtInMaxRtExc .1.3.6.1.4.1.4641.6.2.3002
eedActionV2T
rap

NA

NA

rt In Max Rt Exceed Action Trap

rt In Max Rt
Exceed Action
Trap

rtInMaxRtExc
eedClearV2Tr
ap

.1.3.6.1.4.1.4641.6.2.3003

NA

NA

rt In Max Rt Exceed Clear Trap

rt In Max Rt
Exceed Clear
Trap

rtInAddV2Tra
p

.1.3.6.1.4.1.4641.6.2.3004

NA

NA

rt In Add Trap

rt In Add Trap

rtInDelV2Trap .1.3.6.1.4.1.4641.6.2.3005

NA

NA

rt In Del Trap

rt In Del Trap

rtInAttrChgDb .1.3.6.1.4.1.4641.6.2.3006
ChangeV2Tra
p

NA

NA

rt In Attr Chg Db Change Trap

rt In Attr Chg
Db Change
Trap

rtInAdminChg .1.3.6.1.4.1.4641.6.2.3007
V2Trap_enabl
ed ( 1 )

NA

NA

rt In Admin Chg Trap

rt In Admin
Chg Trap

rtInAdminChg .1.3.6.1.4.1.4641.6.2.3007
V2Trap_disabl
ed ( 2 )

NA

NA

rt In Admin Chg Trap

rt In Admin
Chg Trap

rtInAdminChg .1.3.6.1.4.1.4641.6.2.3007
V2Trap_testin
g(3)

NA

NA

rt In Admin Chg Trap

rt In Admin
Chg Trap

rtInOperUpV2 .1.3.6.1.4.1.4641.6.2.3008
Trap

NA

NA

rt In Oper Up Trap

rt In Oper Up
Trap

rtInOperDown .1.3.6.1.4.1.4641.6.2.3009
V2Trap

NA

NA

rt In Oper Down Trap

rt In Oper
Down Trap

brInAddV2Tra .1.3.6.1.4.1.4641.6.2.3100
p

NA

NA

br In Add Trap

br In Add Trap

brInDelV2Tra
p

.1.3.6.1.4.1.4641.6.2.3101

NA

NA

br In Del Trap

br In Del Trap

brInAttrChgD
bChangeV2Tr
ap

.1.3.6.1.4.1.4641.6.2.3102

NA

NA

br In Attr Chg Db Change Trap

br In Attr Chg
Db Change
Trap

brInAdminCh .1.3.6.1.4.1.4641.6.2.3103
gV2Trap_enab
led ( 1 )

NA

NA

br In Admin Chg Trap

br In Admin
Chg Trap

brInAdminCh
gV2Trap_disa
bled ( 2 )

.1.3.6.1.4.1.4641.6.2.3103

NA

NA

br In Admin Chg Trap

br In Admin
Chg Trap

brInAdminCh
gV2Trap_testi
ng ( 3 )

.1.3.6.1.4.1.4641.6.2.3103

NA

NA

br In Admin Chg Trap

br In Admin
Chg Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-229

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

brInOperUpV
2Trap

.1.3.6.1.4.1.4641.6.2.3104

NA

NA

br In Oper Up Trap

br In Oper Up
Trap

brInOperDown .1.3.6.1.4.1.4641.6.2.3105
V2Trap

NA

NA

br In Oper Down Trap

br In Oper
Down Trap

brInPEAddV2
Trap

.1.3.6.1.4.1.4641.6.2.3106

NA

NA

br In PE Add Trap

br In PE Add
Trap

brInPEDelV2
Trap

.1.3.6.1.4.1.4641.6.2.3107

NA

NA

br In PE Del Trap

br In PE Del
Trap

brInPEAttrCh .1.3.6.1.4.1.4641.6.2.3108
gDbChangeV2
Trap

NA

NA

br In PE Attr Chg Db Change Trap

.1.3.6.1.4.1.4641.6.2.3109

NA

NA

br-In-PE-Admin-Chg-V2Trap

br-In-PE-Adm
in-Chg-V2Tra
p

brInPEAdmin .1.3.6.1.4.1.4641.6.2.3109
ChgV2Trap_di
sabled ( 2 )

NA

NA

br-In-PE-Admin-Chg-V2Trap

br-In-PE-Adm
in-Chg-V2Tra
p

brInPEAdmin .1.3.6.1.4.1.4641.6.2.3109
ChgV2Trap_te
sting ( 3 )

NA

NA

br-In-PE-Admin-Chg-V2Trap

br-In-PE-Adm
in-Chg-V2Tra
p

brInPEOperUp .1.3.6.1.4.1.4641.6.2.3110
V2Trap

NA

NA

br-In-PE-Oper-Up-V2Trap

br-In-PE-Oper
-Up-V2Trap

brInPEOperDo .1.3.6.1.4.1.4641.6.2.3111
wnV2Trap

NA

NA

br-In-PE-Oper-Down-V2Trap

br-In-PE-Oper
-Down-V2Tra
p

brInPEStMac
AddV2Trap

.1.3.6.1.4.1.4641.6.2.3112

NA

NA

br-In-PE-St-Mac-Add-V2Trap

br-In-PE-St-M
ac-Add-V2Tra
p

brInPEStMac
DelV2Trap

.1.3.6.1.4.1.4641.6.2.3113

NA

NA

br-In-PE-St-Mac-Del-V2Trap

br-In-PE-St-M
ac-Del-V2Tra
p

brInStMacAdd .1.3.6.1.4.1.4641.6.2.3114
V2Trap

NA

NA

br-In-St-Mac-Add-V2Trap

br-In-St-MacAdd-V2Trap

brInStMacDel
V2Trap

.1.3.6.1.4.1.4641.6.2.3115

NA

NA

br-In-St-Mac-Del-V2Trap

br-In-St-MacDel-V2Trap

ethOamNewR .1.3.6.1.4.1.4641.6.2.3116
emoteMepV2T
rap

NA

NA

eth-Oam-New-Remote-Mep-V2Tra
p

eth-Oam-New
-Remote-Mep
-V2Trap

ethOamRemot .1.3.6.1.4.1.4641.6.2.3117
eMepLossOfC
CV2Trap

NA

NA

eth-Oam-Remote-Mep-LossOfCCV2Trap

eth-Oam-Rem
ote-Mep-Loss
OfCC-V2Trap

brInPEAdmin
ChgV2Trap_e
nabled ( 1 )

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-230

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Trap Name

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Trap OID

Description

Short
Description

ethOamRemot .1.3.6.1.4.1.4641.6.2.3118
eMepCCResto
redV2Trap

NA

NA

eth-Oam-Remote-Mep-CCRestored eth-Oam-Rem
-V2Trap
ote-Mep-CCR
estored-V2Tra
p

brInMapStpV2 .1.3.6.1.4.1.4641.6.2.3119
Trap

NA

NA

br-In-Map-Stp-V2Trap

br-In-Map-Stp
-V2Trap

brInUnmapStp .1.3.6.1.4.1.4641.6.2.3120
V2Trap

NA

NA

br-In-Unmap-Stp-V2Trap

br-In-UnmapStp-V2Trap

BrgHighThV2
Trap

.1.3.6.1.4.1.4641.6.2.3121

NA

NA

Brg-High-Th-V2Trap

Brg-High-ThV2Trap

BrgLowThV2
Trap

.1.3.6.1.4.1.4641.6.2.3122

NA

NA

Brg-Low-Th-V2Trap

Brg-Low-ThV2Trap

BrgRlrnThV2
Trap

.1.3.6.1.4.1.4641.6.2.3123

NA

NA

Brg-Rlrn-Th-V2Trap

Brg-Rlrn-ThV2Trap

BrgMxMacTh
V2Trap

.1.3.6.1.4.1.4641.6.2.3124

NA

NA

Brg-Mx-Mac-Th-V2Trap

Brg-Mx-MacTh-V2Trap

BrInDupMacV .1.3.6.1.4.1.4641.6.2.3125
2Trap

NA

NA

Br-In-Dup-Mac-V2Trap

Br-In-Dup-Ma
c-V2Trap

stpInAddV2Tr .1.3.6.1.4.1.4641.6.2.3130
ap

NA

NA

stp-In-Add-V2Trap

stp-In-Add-V
2Trap

stpInDelV2Tra .1.3.6.1.4.1.4641.6.2.3131
p

NA

NA

stp-In-Del-V2Trap

stp-In-Del-V2
Trap

stpInAttrChgV .1.3.6.1.4.1.4641.6.2.3132
2Trap

NA

NA

stp-In-Attr-Chg-V2Trap

stp-In-Attr-Ch
g-V2Trap

stpInAdminCh .1.3.6.1.4.1.4641.6.2.3133
gV2Trap

NA

NA

stp-In-Admin-Chg-V2Trap

stp-In-AdminChg-V2Trap

stpMstAddV2
Trap

.1.3.6.1.4.1.4641.6.2.3134

NA

NA

stp-Mst-Add-V2Trap

stp-Mst-AddV2Trap

stpMstDelV2T .1.3.6.1.4.1.4641.6.2.3135
rap

NA

NA

stp-Mst-Del-V2Trap

stp-Mst-Del-V
2Trap

stpMstAttrChg .1.3.6.1.4.1.4641.6.2.3136
V2Trap

NA

NA

stp-Mst-Attr-Chg-V2Trap

stp-Mst-AttrChg-V2Trap

stpPortAttrCh
gV2Trap

.1.3.6.1.4.1.4641.6.2.3137

NA

NA

stp-Port-Attr-Chg-V2Trap

stp-Port-AttrChg-V2Trap

stpPortBpduE .1.3.6.1.4.1.4641.6.2.3138
xchangeV2Tra
p

NA

NA

stp-Port-BpduExchange-V2Trap

stp-Port-Bpdu
Exchange-V2
Trap

stpPortOnline
V2Trap

.1.3.6.1.4.1.4641.6.2.3139

NA

NA

stp-Port-Online-V2Trap

stp-Port-Onlin
e-V2Trap

stpPortOffline
V2Trap

.1.3.6.1.4.1.4641.6.2.3140

NA

NA

stp-Port-Offline-V2Trap

stp-Port-Offli
ne-V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-231

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

stpPortRoleSta .1.3.6.1.4.1.4641.6.2.3141
teChangeV2Tr
ap

NA

NA

stp-Port-RoleState-Change-V2Trap

stp-Port-Role
State-ChangeV2Trap

StpPortDel

.1.3.6.1.4.1.4641.6.2.3142

NA

NA

Stp-Port-Del

Stp-Port-Del

NewReMep

.1.3.6.1.4.1.4641.6.2.3150

NA

NA

New-Re-Mep

New-Re-Mep

ReMepLoc

.1.3.6.1.4.1.4641.6.2.3151

NA

NA

Re-Mep-Loc

Re-Mep-Loc

ReMepBack

.1.3.6.1.4.1.4641.6.2.3152

NA

NA

Re-Mep-Back

Re-Mep-Back

MdAdd

.1.3.6.1.4.1.4641.6.2.3153

NA

NA

Md-Add

Md-Add

MdDel

.1.3.6.1.4.1.4641.6.2.3154

NA

NA

Md-Del

Md-Del

MaAtrChg

.1.3.6.1.4.1.4641.6.2.3155

NA

NA

Ma-Atr-Chg

Ma-Atr-Chg

MaAdd

.1.3.6.1.4.1.4641.6.2.3156

NA

NA

Ma-Add

Ma-Add

MaDel

.1.3.6.1.4.1.4641.6.2.3157

NA

NA

Ma-Del

Ma-Del

MepAtrChg

.1.3.6.1.4.1.4641.6.2.3158

NA

NA

Mep-Atr-Chg

Mep-Atr-Chg

MepAdd

.1.3.6.1.4.1.4641.6.2.3159

NA

NA

Mep-Add

Mep-Add

MepDel

.1.3.6.1.4.1.4641.6.2.3160

NA

NA

Mep-Del

Mep-Del

ExtMaChg

.1.3.6.1.4.1.4641.6.2.3161

NA

NA

Ext-Ma-Chg

Ext-Ma-Chg

ExtGlbChg

.1.3.6.1.4.1.4641.6.2.3162

NA

NA

Ext-Glb-Chg

Ext-Glb-Chg

qosGroupAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.3300

NA

NA

qos-Group-Add-V2Trap

qos-Group-Ad
d-V2Trap

qosGroupDel
V2Trap

.1.3.6.1.4.1.4641.6.2.3301

NA

NA

qos-Group-Del-V2Trap

qos-Group-De
l-V2Trap

qosGroupChg
V2Trap

.1.3.6.1.4.1.4641.6.2.3302

NA

NA

qos-Group-Chg-V2Trap

qos-Group-Ch
g-V2Trap

brDot1pInMap .1.3.6.1.4.1.4641.6.2.3303
AttrChangeV2
Trap

NA

NA

br-Dot1p-In-Map-Attr-Change-V2T br-Dot1p-Inrap
Map-Attr-Cha
nge-V2Trap

brDot1pOutM
apAttrChange
V2Trap

.1.3.6.1.4.1.4641.6.2.3304

NA

NA

br-Dot1p-Out-Map-Attr-Change-V
2Trap

br-Dot1p-OutMap-Attr-Cha
nge-V2Trap

qosTPAddedV
2Trap

.1.3.6.1.4.1.4641.6.2.3305

NA

NA

qos-TP-Added-V2Trap

qos-TP-Added
-V2Trap

qosTPDeleted
V2Trap

.1.3.6.1.4.1.4641.6.2.3306

NA

NA

qos-TP-Deleted-V2Trap

qos-TP-Delete
d-V2Trap

qosTPAttrCha
ngeV2Trap

.1.3.6.1.4.1.4641.6.2.3307

NA

NA

qos-TP-Attr-Change-V2Trap

qos-TP-Attr-C
hange-V2Trap

qosTPLAdded
V2Trap

.1.3.6.1.4.1.4641.6.2.3308

NA

NA

qos-TP-Ladded-V2Trap

qos-TP-Ladde
d-V2Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-232

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

qosTPLDelete
dV2Trap

.1.3.6.1.4.1.4641.6.2.3309

NA

NA

qos-TPL-Deleted-V2Trap

qos-TPL-Dele
ted-V2Trap

qosTPLRuleA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.3310

NA

NA

qos-TPL-Rule-Added-V2Trap

qos-TPL-Rule
-Added-V2Tra
p

qosTPLRuleD
eletedV2Trap

.1.3.6.1.4.1.4641.6.2.3311

NA

NA

qos-TPL-Rule-Deleted-V2Trap

qos-TPL-Rule
-Deleted-V2Tr
ap

qosDscpMapO .1.3.6.1.4.1.4641.6.2.3312
utAttrChange
V2Trap

NA

NA

qos-Dscp-Map-Out-Attr-Change-V
2Trap

qos-Dscp-Ma
p-Out-Attr-Ch
ange-V2Trap

qosTPLRuleAt .1.3.6.1.4.1.4641.6.2.3313
trChangeV2Tr
ap

NA

NA

qos-TPL-Rule-Attr-Change-V2Trap qos-TPL-Rule
-Attr-ChangeV2Trap

pcmPpgGrpAd .1.3.6.1.4.1.4641.6.2.3400
dedV2Trap

NA

NA

pcm-Ppg-Grp-Added-V2Trap

pcm-Ppg-GrpAdded-V2Tra
p

pcmPpgGrpDe .1.3.6.1.4.1.4641.6.2.3401
letedV2Trap

NA

NA

pcm-Ppg-Grp-Deleted-V2Trap

pcm-Ppg-GrpDeleted-V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3402

NA

NA

pcm-Ppg-Grp-Attr-ChgDb-Change- pcm-Ppg-GrpV2Trap
Attr-ChgDb-C
hange-V2Trap

pcmPpgGrpOn .1.3.6.1.4.1.4641.6.2.3403
lineV2Trap

NA

NA

pcm-Ppg-Grp-Online-V2Trap

pcm-Ppg-GrpOnline-V2Tra
p

pcmPpgGrpOf .1.3.6.1.4.1.4641.6.2.3404
flineV2Trap

NA

NA

pcm-Ppg-Grp-Offline-V2Trap

pcm-Ppg-GrpOffline-V2Tra
p

pcmPpgChnA
ddedV2Trap

.1.3.6.1.4.1.4641.6.2.3450

NA

NA

pcm-Ppg-Chn-Added-V2Trap

pcm-Ppg-Chn
-Added-V2Tra
p

pcmPpgChnDe .1.3.6.1.4.1.4641.6.2.3451
letedV2Trap

NA

NA

pcm-Ppg-Chn-Deleted-V2Trap

pcm-Ppg-Chn
-Deleted-V2Tr
ap

pcmPpgChnAt .1.3.6.1.4.1.4641.6.2.3452
trChgDbChan
geV2Trap

NA

NA

pcm-Ppg-Chn-Attr-ChgDb-Change- pcm-Ppg-Chn
V2Trap
-Attr-ChgDbChange-V2Tr
ap

pcmPpgChnS
woDbChange
V2Trap

NA

NA

pcm-Ppg-Chn-SwoDbChange-V2Tr pcm-Ppg-Chn
ap
-SwoDbChang
e-V2Trap

pcmPpgGrpAt
trChgDbChan
geV2Trap

.1.3.6.1.4.1.4641.6.2.3453

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-233

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

trafficFilterAd .1.3.6.1.4.1.4641.6.2.3500
dedV2Trap

NA

NA

traffic-Filter-Added-V2Trap

traffic-FilterAdded-V2Tra
p

trafficFilterDel .1.3.6.1.4.1.4641.6.2.3501
etedV2Trap

NA

NA

traffic-Filter-Deleted-V2Trap

traffic-FilterDeleted-V2Tr
ap

trafficFilterAtt .1.3.6.1.4.1.4641.6.2.3502
rChangeV2Tra
p

NA

NA

traffic-Filter-Attr-Change-V2Trap

traffic-FilterAttr-ChangeV2Trap

trafficFilterRul .1.3.6.1.4.1.4641.6.2.3503
eAddedV2Tra
p

NA

NA

traffic-Filter-Rule-Added-V2Trap

traffic-FilterRule-AddedV2Trap

trafficFilterRul .1.3.6.1.4.1.4641.6.2.3504
eDeletedV2Tr
ap

NA

NA

traffic-Filter-Rule-Deleted-V2Trap

traffic-FilterRule-DeletedV2Trap

trafficFilterRul .1.3.6.1.4.1.4641.6.2.3505
eMirrAttrChg
V2Trap

NA

NA

traffic-Filter-Rule-Mirr-Attr-Chg-V traffic-Filter2Trap
Rule-Mirr-Att
r-Chg-V2Trap

pcmImaAdded .1.3.6.1.4.1.4641.6.2.3600
V2Trap

NA

NA

pcm-Ima-Added-V2Trap

pcm-Ima-Add
ed-V2Trap

pcmImaDelete .1.3.6.1.4.1.4641.6.2.3601
dV2Trap

NA

NA

pcm-Ima-Deleted-V2Trap

pcm-Ima-Dele
ted-V2Trap

pcmImaAttrCh .1.3.6.1.4.1.4641.6.2.3602
gDbChangeV2
Trap

NA

NA

pcm-Ima-Attr-ChgDb-Change-V2T pcm-Ima-Attrrap
ChgDb-Chang
e-V2Trap

pcmImaAdmin .1.3.6.1.4.1.4641.6.2.3603
ChgV2Trap_e
nabled ( 1 )

NA

NA

pcm-Ima-Admin-Chg-V2Trap

pcm-Ima-Adm
in-Chg-V2Tra
p

pcmImaAdmin .1.3.6.1.4.1.4641.6.2.3603
ChgV2Trap_di
sabled ( 2 )

NA

NA

pcm-Ima-Admin-Chg-V2Trap

pcm-Ima-Adm
in-Chg-V2Tra
p

pcmImaAdmin .1.3.6.1.4.1.4641.6.2.3603
ChgV2Trap_te
sting ( 3 )

NA

NA

pcm-Ima-Admin-Chg-V2Trap

pcm-Ima-Adm
in-Chg-V2Tra
p

pcmImaOnline .1.3.6.1.4.1.4641.6.2.3604
V2Trap

NA

NA

pcm-Ima-Online-V2Trap

pcm-Ima-Onli
ne-V2Trap

pcmImaLinkA .1.3.6.1.4.1.4641.6.2.3605
ddedV2Trap

NA

NA

pcm-Ima-Link-Added-V2Trap

pcm-Ima-Link
-Added-V2Tra
p

pcmImaLinkD .1.3.6.1.4.1.4641.6.2.3606
eletedV2Trap

NA

NA

pcm-Ima-Link-Deleted-V2Trap

pcm-Ima-Link
-Deleted-V2Tr
ap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-234

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmImaGrStar .1.3.6.1.4.1.4641.6.2.3607
tupFeV2Trap

NA

NA

pcm-Ima-Gr-Startup-Fe-V2Trap

pcm-Ima-Gr-S
tartup-Fe-V2T
rap

pcmImaGrCfg
AbortV2Trap

.1.3.6.1.4.1.4641.6.2.3608

NA

NA

pcm-Ima-Gr-Cfg-Abort-V2Trap

pcm-Ima-GrCfg-Abort-V2
Trap

pcmImaGrCfg .1.3.6.1.4.1.4641.6.2.3609
AbortFeV2Tra
p

NA

NA

pcm-Ima-Gr-Cfg-Abort-Fe-V2Trap

pcm-Ima-GrCfg-Abort-FeV2Trap

pcmImaGrInsu .1.3.6.1.4.1.4641.6.2.3610
ffLinksV2Trap

NA

NA

pcm-Ima-Gr-InsuffLinks-V2Trap

pcm-Ima-Gr-I
nsuffLinks-V2
Trap

pcmImaGrInsu .1.3.6.1.4.1.4641.6.2.3611
ffLinksFeV2Tr
ap

NA

NA

pcm-Ima-Gr-InsuffLinks-Fe-V2Tra
p

pcm-Ima-Gr-I
nsuffLinks-Fe
-V2Trap

pcmImaGrBlo .1.3.6.1.4.1.4641.6.2.3612
ckedFeV2Trap

NA

NA

pcm-Ima-Gr-Blocked-Fe-V2Trap

pcm-Ima-GrBlocked-Fe-V
2Trap

pcmImaGrTim .1.3.6.1.4.1.4641.6.2.3613
ingSyncV2Tra
p

NA

NA

pcm-Ima-Gr-Timing-Sync-V2Trap

pcm-Ima-Gr-T
iming-Sync-V
2Trap

pcmImaGrGT .1.3.6.1.4.1.4641.6.2.3614
SMDownV2Tr
ap

NA

NA

pcm-Ima-Gr-GTSM-Down-V2Trap

pcm-Ima-GrGTSM-DownV2Trap

pcmImaGrXC
AlarmV2Trap

.1.3.6.1.4.1.4641.6.2.3615

NA

NA

pcm-Ima-Gr-XC-Alarm-V2Trap

pcm-Ima-GrXC-Alarm-V2
Trap

pcmImaGrUas .1.3.6.1.4.1.4641.6.2.3616
V2Trap

NA

NA

pcm-Ima-Gr-Uas-V2Trap

pcm-Ima-GrUas-V2Trap

pcmImaGrAll
LnkDownV2T
rap

.1.3.6.1.4.1.4641.6.2.3617

NA

NA

pcm-Ima-Gr-All-LnkDown-V2Trap pcm-Ima-GrAll-LnkDown
-V2Trap

pcmImaLnkOn .1.3.6.1.4.1.4641.6.2.3650
lineV2Trap

NA

NA

pcm-Ima-LnkOnline-V2Trap

pcm-Ima-Lnk
Online-V2Tra
p

pcmImaLnkLi
fV2Trap

.1.3.6.1.4.1.4641.6.2.3651

NA

NA

pcm-Ima-LnkLif-V2Trap

pcm-Ima-Lnk
Lif-V2Trap

pcmImaLnkLo .1.3.6.1.4.1.4641.6.2.3652
dsV2Trap

NA

NA

pcm-Ima-LnkLods-V2Trap

pcm-Ima-Lnk
Lods-V2Trap

pcmImaLnkRf .1.3.6.1.4.1.4641.6.2.3653
iV2Trap

NA

NA

pcm-Ima-LnkRfi-V2Trap

pcm-Ima-Lnk
Rfi-V2Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-235

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

pcmImaLnkTx .1.3.6.1.4.1.4641.6.2.3654
MisConV2Tra
p

NA

NA

pcm-Ima-LnkTx-MisCon-V2Trap

pcm-Ima-Lnk
Tx-MisCon-V
2Trap

pcmImaLnkRx .1.3.6.1.4.1.4641.6.2.3655
MisConV2Tra
p

NA

NA

pcm-Ima-LnkRx-MisCon-V2Trap

pcm-Ima-Lnk
Rx-MisCon-V
2Trap

pcmImaLnkTx .1.3.6.1.4.1.4641.6.2.3656
FaultV2Trap

NA

NA

pcm-Ima-LnkTx-Fault-V2Trap

pcm-Ima-Lnk
Tx-Fault-V2T
rap

pcmImaLnkRx .1.3.6.1.4.1.4641.6.2.3657
FaultV2Trap

NA

NA

pcm-Ima-LnkRx-Fault-V2Trap

pcm-Ima-Lnk
Rx-Fault-V2T
rap

pcmImaLnkTx .1.3.6.1.4.1.4641.6.2.3658
UnuseFeV2Tr
ap

NA

NA

pcm-Ima-LnkTxUnuse-Fe-V2Trap

pcm-Ima-Lnk
TxUnuse-FeV2Trap

pcmImaLnkRx .1.3.6.1.4.1.4641.6.2.3659
UnuseFeV2Tr
ap

NA

NA

pcm-Ima-LnkRxUnuse-Fe-V2Trap

pcm-Ima-Lnk
RxUnuse-FeV2Trap

pcmImaLnkUa .1.3.6.1.4.1.4641.6.2.3660
sV2Trap

NA

NA

pcm-Ima-LnkUas-V2Trap

pcm-Ima-Lnk
Uas-V2Trap

pcmImaLnkUa .1.3.6.1.4.1.4641.6.2.3661
sFeV2Trap

NA

NA

pcm-Ima-LnkUas-Fe-V2Trap

pcm-Ima-Lnk
Uas-Fe-V2Tra
p

pcmImaLnkNo .1.3.6.1.4.1.4641.6.2.3662
tActV2Trap

NA

NA

pcm-Ima-LnkNotAct-V2Trap

pcm-Ima-Lnk
NotAct-V2Tra
p

pcmImaLnkAt .1.3.6.1.4.1.4641.6.2.3663
trChgV2Trap

NA

NA

pcm-Ima-LnkAttr-Chg-V2Trap

pcm-Ima-Lnk
Attr-Chg-V2T
rap

VcgGrAddV2
Trap

.1.3.6.1.4.1.4641.6.2.3700

NA

NA

Vcg-Gr-Add-V2Trap

Vcg-Gr-AddV2Trap

VcgGrDelV2T .1.3.6.1.4.1.4641.6.2.3701
rap

NA

NA

Vcg-Gr-Del-V2Trap

Vcg-Gr-Del-V
2Trap

VcgGrAtrChV .1.3.6.1.4.1.4641.6.2.3702
2Trap

NA

NA

Vcg-Gr-AtrCh-V2Trap

Vcg-Gr-AtrCh
-V2Trap

VcgGrAdmCh .1.3.6.1.4.1.4641.6.2.3703
V2Trap

NA

NA

Vcg-Gr-AdmCh-V2Trap

Vcg-Gr-Adm
Ch-V2Trap

VcgGrOnlinV
2Trap

.1.3.6.1.4.1.4641.6.2.3704

NA

NA

Vcg-Gr-Onlin-V2Trap

Vcg-Gr-Onlin
-V2Trap

VcgMbrAddV
2Trap

.1.3.6.1.4.1.4641.6.2.3705

NA

NA

Vcg-Mbr-Add-V2Trap

Vcg-Mbr-Add
-V2Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-236

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

VcgMbrDelV2 .1.3.6.1.4.1.4641.6.2.3706
Trap

NA

NA

Vcg-Mbr-Del-V2Trap

Vcg-Mbr-DelV2Trap

VcgGrLomV2
Trap

.1.3.6.1.4.1.4641.6.2.3707

NA

NA

Vcg-Gr-Lom-V2Trap

Vcg-Gr-LomV2Trap

VcgGrSqmV2
Trap

.1.3.6.1.4.1.4641.6.2.3708

NA

NA

Vcg-Gr-Sqm-V2Trap

Vcg-Gr-SqmV2Trap

VcgGrLoaV2T .1.3.6.1.4.1.4641.6.2.3709
rap

NA

NA

Vcg-Gr-Loa-V2Trap

Vcg-Gr-LoaV2Trap

VcgGrLfdV2T .1.3.6.1.4.1.4641.6.2.3710
rap

NA

NA

Vcg-Gr-Lfd-V2Trap

Vcg-Gr-Lfd-V
2Trap

VcgGrLocsV2 .1.3.6.1.4.1.4641.6.2.3711
Trap

NA

NA

Vcg-Gr-Locs-V2Trap

Vcg-Gr-LocsV2Trap

VcgGrLoccsV
2Trap

.1.3.6.1.4.1.4641.6.2.3712

NA

NA

Vcg-Gr-Loccs-V2Trap

Vcg-Gr-Loccs
-V2Trap

VcgGrXconnV .1.3.6.1.4.1.4641.6.2.3713
2Trap

NA

NA

Vcg-Gr-Xconn-V2Trap

Vcg-Gr-Xcon
n-V2Trap

VcgGrMbrDn
V2Trap

.1.3.6.1.4.1.4641.6.2.3714

NA

NA

Vcg-Gr-MbrDn-V2Trap

Vcg-Gr-MbrD
n-V2Trap

VcgGrMAtCh
V2Trap

.1.3.6.1.4.1.4641.6.2.3715

NA

NA

Vcg-Gr-MAtCh-V2Trap

Vcg-Gr-MAtC
h-V2Trap

VcgGrMisMV .1.3.6.1.4.1.4641.6.2.3716
2Trap

NA

NA

Vcg-Gr-MisM-V2Trap

Vcg-Gr-MisM
-V2Trap

VcgGrFLoCV
2Trap

.1.3.6.1.4.1.4641.6.2.3717

NA

NA

Vcg-Gr-FLoC-V2Trap

Vcg-Gr-FLoC
-V2Trap

VcgGrInfEvV
2Trap

.1.3.6.1.4.1.4641.6.2.3718

NA

NA

Vcg-Gr-InfEv-V2Trap

Vcg-Gr-InfEv
-V2Trap

VcgPtAtrChV
2Trap

.1.3.6.1.4.1.4641.6.2.3719

NA

NA

Vcg-Pt-AtrCh-V2Trap

Vcg-Pt-AtrCh
-V2Trap

OntLosV2Trap .1.3.6.1.4.1.4641.6.2.3800

NA

NA

Ont-Los-V2Trap

Ont-Los-V2Tr
ap

OntSfV2Trap

.1.3.6.1.4.1.4641.6.2.3801

NA

NA

Ont-Sf-V2Trap

Ont-Sf-V2Tra
p

OntSdV2Trap

.1.3.6.1.4.1.4641.6.2.3802

NA

NA

Ont-Sd-V2Trap

Ont-Sd-V2Tra
p

OntLofV2Trap .1.3.6.1.4.1.4641.6.2.3803

NA

NA

Ont-Lof-V2Trap

Ont-Lof-V2Tr
ap

OntLcdV2Tra
p

.1.3.6.1.4.1.4641.6.2.3804

NA

NA

Ont-Lcd-V2Trap

Ont-Lcd-V2Tr
ap

OntCpeV2Tra
p

.1.3.6.1.4.1.4641.6.2.3805

NA

NA

Ont-Cpe-V2Trap

Ont-Cpe-V2Tr
ap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-237

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

OntLoaV2Tra
p

.1.3.6.1.4.1.4641.6.2.3806

NA

NA

Ont-Loa-V2Trap

Ont-Loa-V2Tr
ap

OntDgV2Trap

.1.3.6.1.4.1.4641.6.2.3807

NA

NA

Ont-Dg-V2Trap

Ont-Dg-V2Tr
ap

OntOamlV2Tr .1.3.6.1.4.1.4641.6.2.3808
ap

NA

NA

Ont-Oaml-V2Trap

Ont-Oaml-V2
Trap

OntRdiV2Trap .1.3.6.1.4.1.4641.6.2.3809

NA

NA

Ont-Rdi-V2Trap

Ont-Rdi-V2Tr
ap

OntSufV2Trap .1.3.6.1.4.1.4641.6.2.3810

NA

NA

Ont-Suf-V2Trap

Ont-Suf-V2Tr
ap

OntSdfV2Trap .1.3.6.1.4.1.4641.6.2.3811

NA

NA

Ont-Sdf-V2Trap

Ont-Sdf-V2Tr
ap

OntMeaV2Tra .1.3.6.1.4.1.4641.6.2.3812
p

NA

NA

Ont-Mea-V2Trap

Ont-Mea-V2T
rap

UnexpOntV2T .1.3.6.1.4.1.4641.6.2.3813
rap

NA

NA

Unexp-Ont-V2Trap

Unexp-Ont-V
2Trap

OntOorV2Tra
p

.1.3.6.1.4.1.4641.6.2.3814

NA

NA

Ont-Oor-V2Trap

Ont-Oor-V2Tr
ap

MEMV2Trap

.1.3.6.1.4.1.4641.6.2.3815

NA

NA

MEM-V2Trap

MEM-V2Trap

ActivatedV2Tr .1.3.6.1.4.1.4641.6.2.3816
ap

NA

NA

Activated-V2Trap

Activated-V2
Trap

DeActiveV2Tr .1.3.6.1.4.1.4641.6.2.3817
apV2Trap

NA

NA

DeActive-V2Trap

DeActive-V2
Trap

RFUPV2Trap

.1.3.6.1.4.1.4641.6.2.3818

NA

NA

RFUP-V2Trap

RFUP-V2Trap

LossOfkeyV2
Trap

.1.3.6.1.4.1.4641.6.2.3819

NA

NA

LossOfkey-V2Trap

LossOfkey-V2
Trap

OntAddedV2T .1.3.6.1.4.1.4641.6.2.3820
rap

NA

NA

Ont-Added-V2Trap

Ont-Added-V
2Trap

OntDeletedV2 .1.3.6.1.4.1.4641.6.2.3821
Trap

NA

NA

Ont-Deleted-V2Trap

Ont-DeletedV2Trap

OntEnableV2
Trap

.1.3.6.1.4.1.4641.6.2.3822

NA

NA

Ont-Enable-V2Trap

Ont-Enable-V
2Trap

OntDisableV2
Trap

.1.3.6.1.4.1.4641.6.2.3823

NA

NA

Ont-Disable-V2Trap

Ont-DisableV2Trap

OntAttrChgV2 .1.3.6.1.4.1.4641.6.2.3824
Trap

NA

NA

Ont-AttrChg-V2Trap

Ont-AttrChgV2Trap

OntPortEnV2
Trap

.1.3.6.1.4.1.4641.6.2.3825

NA

NA

Ont-PortEn-V2Trap

Ont-PortEn-V
2Trap

OntPortDisV2
Trap

.1.3.6.1.4.1.4641.6.2.3826

NA

NA

Ont-PortDis-V2Trap

Ont-PortDisV2Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-238

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

OntPortChgV2 .1.3.6.1.4.1.4641.6.2.3827
Trap

NA

NA

Ont-PortChg-V2Trap

Ont-PortChgV2Trap

OntMltTestV2
Trap

.1.3.6.1.4.1.4641.6.2.3828

NA

NA

Ont-MltTest-V2Trap

Ont-MltTestV2Trap

OntDbdtTstV2 .1.3.6.1.4.1.4641.6.2.3829
Trap

NA

NA

Ont-DbdtTst-V2Trap

Ont-DbdtTstV2Trap

OntConnTstV
2Trap

.1.3.6.1.4.1.4641.6.2.3830

NA

NA

Ont-ConnTst-V2Trap

Ont-ConnTstV2Trap

OntEtLbTstV2 .1.3.6.1.4.1.4641.6.2.3831
Trap

NA

NA

Ont-EtLbTst-V2Trap

Ont-EtLbTstV2Trap

RoguOntTstV
2Trap

.1.3.6.1.4.1.4641.6.2.3832

NA

NA

Rogu-OntTst-V2Trap

Rogu-OntTstV2Trap

OntRmtDbgV
2Trap

.1.3.6.1.4.1.4641.6.2.3833

NA

NA

Ont-RmtDbg-V2Trap

Ont-RmtDbgV2Trap

OntMpcV2Tra .1.3.6.1.4.1.4641.6.2.3834
p

NA

NA

Ont-Mpc-V2Trap

Ont-Mpc-V2T
rap

OntDbaMisV2 .1.3.6.1.4.1.4641.6.2.3835
Trap

NA

NA

Ont-DbaMis-V2Trap

Ont-DbaMisV2Trap

OmccLinkFlV
2Trap

.1.3.6.1.4.1.4641.6.2.3836

NA

NA

Omcc-LinkFl-V2Trap

Omcc-LinkFlV2Trap

OntCatLosV2
Trap

.1.3.6.1.4.1.4641.6.2.3900

NA

NA

Ont-CatLos-V2Trap

Ont-CatLos-V
2Trap

PonCatLosV2
Trap

.1.3.6.1.4.1.4641.6.2.3901

NA

NA

Pon-CatLos-V2Trap

Pon-CatLos-V
2Trap

OntCatSdV2Tr .1.3.6.1.4.1.4641.6.2.3902
ap

NA

NA

Ont-CatSd-V2Trap

Ont-CatSd-V2
Trap

PonCatSdV2T
rap

.1.3.6.1.4.1.4641.6.2.3903

NA

NA

Pon-CatSd-V2Trap

Pon-CatSd-V2
Trap

OntCatOvV2T .1.3.6.1.4.1.4641.6.2.3904
rap

NA

NA

Ont-CatOv-V2Trap

Ont-CatOv-V
2Trap

PonCatOvV2T .1.3.6.1.4.1.4641.6.2.3905
rap

NA

NA

Pon-CatOv-V2Trap

Pon-CatOv-V
2Trap

DhcpNoRsV2
Trap

.1.3.6.1.4.1.4641.6.2.3906

NA

NA

Dhcp-NoRs-V2Trap

Dhcp-NoRs-V
2Trap

DhcpIncRsV2
Trap

.1.3.6.1.4.1.4641.6.2.3907

NA

NA

Dhcp-IncRs-V2Trap

Dhcp-IncRs-V
2Trap

CssCrdnV2Tra .1.3.6.1.4.1.4641.6.2.3908
p

NA

NA

Css-Crdn-V2Trap

Css-Crdn-V2
Trap

CssTcpOseV2
Trap

NA

NA

Css-TcpOse-V2Trap

Css-TcpOseV2Trap

Trap Name

Trap OID

.1.3.6.1.4.1.4641.6.2.3909

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-239

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

CssSesErrV2T .1.3.6.1.4.1.4641.6.2.3910
rap

NA

NA

Css-SesErr-V2Trap

Css-SesErr-V
2Trap

CssAuthErrV2 .1.3.6.1.4.1.4641.6.2.3911
Trap

NA

NA

Css-AuthErr-V2Trap

Css-AuthErrV2Trap

CssTmOutV2
Trap

.1.3.6.1.4.1.4641.6.2.3912

NA

NA

Css-TmOut-V2Trap

Css-TmOut-V
2Trap

CssSrvrFlV2T .1.3.6.1.4.1.4641.6.2.3913
rap

NA

NA

Css-SrvrFl-V2Trap

Css-SrvrFl-V2
Trap

CsrCrdnV2Tra .1.3.6.1.4.1.4641.6.2.3914
p

NA

NA

Csr-Crdn-V2Trap

Csr-Crdn-V2T
rap

CsrTcpOseV2
Trap

.1.3.6.1.4.1.4641.6.2.3915

NA

NA

Csr-TcpOse-V2Trap

Csr-TcpOse-V
2Trap

CsrSesErrV2T .1.3.6.1.4.1.4641.6.2.3916
rap

NA

NA

Csr-SesErr-V2Trap

Csr-SesErr-V2
Trap

CsrAuthErrV2 .1.3.6.1.4.1.4641.6.2.3917
Trap

NA

NA

Csr-AuthErr-V2Trap

Csr-AuthErrV2Trap

CsrTmOutV2T .1.3.6.1.4.1.4641.6.2.3918
rap

NA

NA

Csr-TmOut-V2Trap

Csr-TmOut-V
2Trap

CsrSrvrFlV2Tr .1.3.6.1.4.1.4641.6.2.3919
ap

NA

NA

Csr-SrvrFl-V2Trap

Csr-SrvrFl-V2
Trap

CsrMalDoc

.1.3.6.1.4.1.4641.6.2.3920

NA

NA

Csr-MalDoc

Csr-MalDoc

UaCrdnV2Tra
p

.1.3.6.1.4.1.4641.6.2.3921

NA

NA

Ua-Crdn-V2Trap

Ua-Crdn-V2T
rap

UaTcpOseV2T .1.3.6.1.4.1.4641.6.2.3922
rap

NA

NA

Ua-TcpOse-V2Trap

Ua-TcpOse-V
2Trap

UaSesErrV2Tr .1.3.6.1.4.1.4641.6.2.3923
ap

NA

NA

Ua-SesErr-V2Trap

Ua-SesErr-V2
Trap

UaAuthErrV2
Trap

.1.3.6.1.4.1.4641.6.2.3924

NA

NA

Ua-AuthErr-V2Trap

Ua-AuthErr-V
2Trap

UaTmOutV2T .1.3.6.1.4.1.4641.6.2.3925
rap

NA

NA

Ua-TmOut-V2Trap

Ua-TmOut-V2
Trap

UaSrvrFlV2Tr .1.3.6.1.4.1.4641.6.2.3926
ap

NA

NA

Ua-SrvrFl-V2Trap

Ua-SrvrFl-V2
Trap

OntEqFailV2T .1.3.6.1.4.1.4641.6.2.3927
rap

NA

NA

Ont-EqFail-V2Trap

Ont-EqFail-V
2Trap

OntPwAlmV2
Trap

.1.3.6.1.4.1.4641.6.2.3928

NA

NA

Ont-PwAlm-V2Trap

Ont-PwAlm-V
2Trap

OntBatMisV2
Trap

.1.3.6.1.4.1.4641.6.2.3929

NA

NA

Ont-BatMis-V2Trap

Ont-BatMis-V
2Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-240

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

OntBatFlV2Tr .1.3.6.1.4.1.4641.6.2.3930
ap

NA

NA

Ont-BatFl-V2Trap

Ont-BatFl-V2
Trap

OntBatLowV2 .1.3.6.1.4.1.4641.6.2.3931
Trap

NA

NA

Ont-BatLow-V2Trap

Ont-BatLowV2Trap

OntLanLosV2
Trap

.1.3.6.1.4.1.4641.6.2.3932

NA

NA

Ont-LanLos-V2Trap

Ont-LanLosV2Trap

OntEthLpV2T
rap

.1.3.6.1.4.1.4641.6.2.3933

NA

NA

Ont-EthLp-V2Trap

Ont-EthLp-V2
Trap

VdsNeLofV2T .1.3.6.1.4.1.4641.6.2.3934
rap

NA

NA

Vds-NeLof-V2Trap

Vds-NeLof-V
2Trap

VdsNeLosV2T .1.3.6.1.4.1.4641.6.2.3935
rap

NA

NA

Vds-NeLos-V2Trap

Vds-NeLos-V
2Trap

VdsFeLosV2T .1.3.6.1.4.1.4641.6.2.3936
rap

NA

NA

Vds-FeLos-V2Trap

Vds-FeLos-V
2Trap

VdsFeLofV2T .1.3.6.1.4.1.4641.6.2.3937
rap

NA

NA

Vds-FeLof-V2Trap

Vds-FeLof-V
2Trap

VdsFeLprV2T .1.3.6.1.4.1.4641.6.2.3938
rap

NA

NA

Vds-FeLpr-V2Trap

Vds-FeLpr-V2
Trap

VdsLnFlV2Tr
ap

.1.3.6.1.4.1.4641.6.2.3939

NA

NA

Vds-LnFl-V2Trap

Vds-LnFl-V2
Trap

VdsNeLolV2T .1.3.6.1.4.1.4641.6.2.3940
rap

NA

NA

Vds-NeLol-V2Trap

Vds-NeLol-V
2Trap

VdsFeLolV2T
rap

.1.3.6.1.4.1.4641.6.2.3941

NA

NA

Vds-FeLol-V2Trap

Vds-FeLol-V2
Trap

MocALolV2Tr .1.3.6.1.4.1.4641.6.2.3942
ap

NA

NA

Moc-ALol-V2Trap

Moc-ALol-V2
Trap

MocALlV2Tra .1.3.6.1.4.1.4641.6.2.3943
p

NA

NA

Moc-ALl-V2Trap

Moc-ALl-V2T
rap

MocALpbkV2 .1.3.6.1.4.1.4641.6.2.3944
Trap

NA

NA

Moc-ALpbk-V2Trap

Moc-ALpbkV2Trap

VoiceGsfaV2T .1.3.6.1.4.1.4641.6.2.3945
rap

NA

NA

Voice-Gsfa-V2Trap

Voice-Gsfa-V
2Trap

VdslLpbkV2T
rap

.1.3.6.1.4.1.4641.6.2.3946

NA

NA

Vdsl-Lpbk-V2Trap

Vdsl-Lpbk-V2
Trap

ExtAlm1V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3947

NA

NA

Ext-Alm1-V2Trap

Ext-Alm1-V2
Trap

ExtAlm2V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3948

NA

NA

Ext-Alm2-V2Trap

Ext-Alm2-V2
Trap

ExtAlm3V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3949

NA

NA

Ext-Alm3-V2Trap

Ext-Alm3-V2
Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-241

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

ExtAlm4V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3950

NA

NA

Ext-Alm4-V2Trap

Ext-Alm4-V2
Trap

ExtAlm5V2Tr
ap

.1.3.6.1.4.1.4641.6.2.3951

NA

NA

Ext-Alm5-V2Trap

Ext-Alm5-V2
Trap

AlarmDropV2
Trap

.1.3.6.1.4.1.4641.6.2.3952

NA

NA

Alarm-Drop-V2Trap

Alarm-DropV2Trap

OntRxPwrLoV .1.3.6.1.4.1.4641.6.2.3953
2Trap

NA

NA

Ont-Rx-PwrLo-V2Trap

Ont-Rx-PwrL
o-V2Trap

PonRxPwrLo
V2Trap

.1.3.6.1.4.1.4641.6.2.3954

NA

NA

Pon-Rx-PwrLo-V2Trap

Pon-Rx-PwrL
o-V2Trap

OntRxPwrHiV .1.3.6.1.4.1.4641.6.2.3955
2Trap

NA

NA

Ont-Rx-PwrHi-V2Trap

Ont-Rx-PwrH
i-V2Trap

PonRxPwrHiV .1.3.6.1.4.1.4641.6.2.3956
2Trap

NA

NA

Pon-RxPwrHi-V2Trap

Pon-RxPwrHi
-V2Trap

bfdSessionUp
V2Trap

.1.3.6.1.4.1.4641.6.2.4000

NA

NA

bfd-SessionUp-V2Trap

bfd-SessionU
p-V2Trap

bfdSessionDo
wnV2Trap

.1.3.6.1.4.1.4641.6.2.4001

NA

NA

bfd-SessionDown-V2Trap

bfd-SessionD
own-V2Trap

bfdSessAttrCh .1.3.6.1.4.1.4641.6.2.4002
angeV2Trap

NA

NA

bfd-SessAttrChange-V2Trap

bfd-SessAttrC
hange-V2Trap

bfdIntfAddV2
Trap

.1.3.6.1.4.1.4641.6.2.4003

NA

NA

bfd-IntfAdd-V2Trap

bfd-IntfAdd-V
2Trap

bfdIntfModV2 .1.3.6.1.4.1.4641.6.2.4004
Trap

NA

NA

bfd-IntfMod-V2Trap

bfd-IntfModV2Trap

bfdIntfDelV2T .1.3.6.1.4.1.4641.6.2.4005
rap

NA

NA

bfd-IntfDel-V2Trap

bfd-IntfDel-V
2Trap

bfdSessMaxTh .1.3.6.1.4.1.4641.6.2.4006
reshV2Trap

NA

NA

bfd-SessMaxThresh-V2Trap

bfd-SessMaxT
hresh-V2Trap

bfdSessLowTh .1.3.6.1.4.1.4641.6.2.4007
reshV2Trap

NA

NA

bfd-SessLowThresh-V2Trap

bfd-SessLowT
hresh-V2Trap

BfdSesPsChV
2Trap

.1.3.6.1.4.1.4641.6.2.4008

NA

NA

Bfd-SesPsCh-V2Trap

Bfd-SesPsChV2Trap

BfdSesBkChV .1.3.6.1.4.1.4641.6.2.4009
2Trap

NA

NA

Bfd-SesBkCh-V2Trap

Bfd-SesBkChV2Trap

MlGrpUpV2Tr .1.3.6.1.4.1.4641.6.2.4050
ap

NA

NA

Ml-GrpUp-V2Trap

Ml-GrpUp-V2
Trap

MlGrpDownV
2Trap

.1.3.6.1.4.1.4641.6.2.4051

NA

NA

Ml-GrpDown-V2Trap

Ml-GrpDownV2Trap

MlAddLnkV2
Trap

.1.3.6.1.4.1.4641.6.2.4052

NA

NA

Ml-AddLnk-V2Trap

Ml-AddLnk-V
2Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-242

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

MlDelLnkV2T .1.3.6.1.4.1.4641.6.2.4053
rap

NA

NA

Ml-DelLnk-V2Trap

Ml-DelLnk-V
2Trap

MlCfgChgV2
Trap

.1.3.6.1.4.1.4641.6.2.4054

NA

NA

Ml-CfgChg-V2Trap

Ml-CfgChg-V
2Trap

MlGrpAddV2
Trap

.1.3.6.1.4.1.4641.6.2.4055

NA

NA

Ml-GrpAdd-V2Trap

Ml-GrpAdd-V
2Trap

MlGrpDelV2T .1.3.6.1.4.1.4641.6.2.4056
rap

NA

NA

Ml-GrpDel-V2Trap

Ml-GrpDel-V
2Trap

MlGrAdmChV .1.3.6.1.4.1.4641.6.2.4057
2Trap

NA

NA

Ml-GrAdmCh-V2Trap

Ml-GrAdmCh
-V2Trap

MlLnkUpV2T
rap

.1.3.6.1.4.1.4641.6.2.4058

NA

NA

Ml-LnkUp-V2Trap

Ml-LnkUp-V2
Trap

MlLnkDownV .1.3.6.1.4.1.4641.6.2.4059
2Trap

NA

NA

Ml-LnkDown-V2Trap

Ml-LnkDownV2Trap

MlLnkChgV2
Trap

.1.3.6.1.4.1.4641.6.2.4060

NA

NA

Ml-LnkChg-V2Trap

Ml-LnkChg-V
2Trap

MirInsAdd
mirrInstAddV
2Trap

.1.3.6.1.4.1.4641.6.2.4100

NA

NA

MirInsAdd- mirrInstAdd-V2Trap

MirInsAddmirrInstAddV2Trap

MirInsDelV2T .1.3.6.1.4.1.4641.6.2.4101
rap

NA

NA

MirInsDel-V2Trap

MirInsDel-V2
Trap

MirTarAddV2
Trap

.1.3.6.1.4.1.4641.6.2.4102

NA

NA

MirTarAdd-V2Trap

MirTarAdd-V
2Trap

MirTarDelV2T .1.3.6.1.4.1.4641.6.2.4103
rap

NA

NA

MirTarDel-V2Trap

MirTarDel-V2
Trap

MirTaAtrChV
2Trap

.1.3.6.1.4.1.4641.6.2.4104

NA

NA

MirTaAtrCh-V2Trap

MirTaAtrChV2Trap

MirTaAdmCh
V2Trap

.1.3.6.1.4.1.4641.6.2.4105

NA

NA

MirTaAdmCh-V2Trap

MirTaAdmCh
-V2Trap

MirTarUpV2T .1.3.6.1.4.1.4641.6.2.4106
rap

NA

NA

MirTarUp-V2Trap

MirTarUp-V2
Trap

MirTarDnV2T .1.3.6.1.4.1.4641.6.2.4107
rap

NA

NA

MirTarDn-V2Trap

MirTarDn-V2
Trap

vrrpMasStV2T .1.3.6.1.4.1.4641.6.2.4150
rap

NA

NA

vrrp-MasSt-V2Trap

vrrp-MasSt-V
2Trap

vrrpAuthV2Tr
ap

.1.3.6.1.4.1.4641.6.2.4151

NA

NA

vrrp-Auth-V2Trap

vrrp-Auth-V2
Trap

vrrpMasRlV2
Trap

.1.3.6.1.4.1.4641.6.2.4152

NA

NA

vrrp-MasRl-V2Trap

vrrp-MasRl-V
2Trap

Trap Name

Trap OID

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-243

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Subtype Subtype
Varbind Varbind
OID
Value

Description

vrPktErrV2Tra .1.3.6.1.4.1.4641.6.2.4153
p

NA

NA

vrPktErr-V2Trap

vrPktErr-V2Tr
ap

vrIfPktErrV2T .1.3.6.1.4.1.4641.6.2.4154
rap

NA

NA

vrIfPktErr-V2Trap

vrIfPktErr-V2
Trap

vrrpVRAddV2 .1.3.6.1.4.1.4641.6.2.4155
Trap

NA

NA

vrrp-VRAdd-V2Trap

vrrp-VRAddV2Trap

vrrpVRDelV2
Trap

.1.3.6.1.4.1.4641.6.2.4156

NA

NA

vrrp-VRDel-V2Trap

vrrp-VRDel-V
2Trap

vrrpVRAtChV .1.3.6.1.4.1.4641.6.2.4157
2Trap

NA

NA

vrrp-VRAtCh-V2Trap

vrrp-VRAtChV2Trap

vrrpVRAdV2T .1.3.6.1.4.1.4641.6.2.4158
rap

NA

NA

vrrp-VRAd-V2Trap

vrrp-VRAd-V
2Trap

vrrpVROpUp
V2Trap

.1.3.6.1.4.1.4641.6.2.4159

NA

NA

vrrp-VROpUp-V2Trap

vrrp-VROpUp
-V2Trap

vrrpVROpDn
V2Trap

.1.3.6.1.4.1.4641.6.2.4160

NA

NA

vrrp-VROpDn-V2Trap

vrrp-VROpDn
-V2Trap

VRTrIfAddV2
Trap

.1.3.6.1.4.1.4641.6.2.4161

NA

NA

VRTrIfAdd-V2Trap

VRTrIfAdd-V
2Trap

VRTrIfDelV2
Trap

.1.3.6.1.4.1.4641.6.2.4162

NA

NA

VRTrIfDel-V2Trap

VRTrIfDel-V2
Trap

VRTrIfChgV2
Trap

.1.3.6.1.4.1.4641.6.2.4163

NA

NA

VRTrIfChg-V2Trap

VRTrIfChg-V
2Trap

VRIpAdrAdd
V2Trap

.1.3.6.1.4.1.4641.6.2.4164

NA

NA

VRIpAdrAdd-V2Trap

VRIpAdrAddV2Trap

VRIpAdrDelV .1.3.6.1.4.1.4641.6.2.4165
2Trap

NA

NA

VRIpAdrDel-V2Trap

VRIpAdrDelV2Trap

IptvLosStrV2
Trap

.1.3.6.1.4.1.4641.6.2.4200

NA

NA

IptvLosStr-V2Trap

IptvLosStr-V2
Trap

Os3GlblAtrV2 .1.3.6.1.4.1.4641.6.2.4501
Trap

NA

NA

Os3-GlblAtr-V2Trap

Os3-GlblAtrV2Trap

Os3GlblCntV2 .1.3.6.1.4.1.4641.6.2.4502
Trap

NA

NA

Os3-GlblCnt-V2Trap

Os3-GlblCntV2Trap

Os3GlblPrcV2 .1.3.6.1.4.1.4641.6.2.4503
Trap

NA

NA

Os3-GlblPrc-V2Trap

Os3-GlblPrcV2Trap

Os3AreaAtrV
2Trap

.1.3.6.1.4.1.4641.6.2.4504

NA

NA

Os3-AreaAtr-V2Trap

Os3-AreaAtrV2Trap

Os3AreaAddV .1.3.6.1.4.1.4641.6.2.4505
2Trap

NA

NA

Os3-AreaAdd-V2Trap

Os3-AreaAdd
-V2Trap

Os3AreaDelV
2Trap

NA

NA

Os3-AreaDel-V2Trap

Os3-AreaDelV2Trap

Trap Name

Trap OID

.1.3.6.1.4.1.4641.6.2.4506

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-244

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Os3IfAtrV2Tr
ap

.1.3.6.1.4.1.4641.6.2.4507

NA

NA

Os3-IfAtr-V2Trap

Os3-IfAtr-V2
Trap

Os3RdstAddV .1.3.6.1.4.1.4641.6.2.4508
2Trap

NA

NA

Os3-RdstAdd-V2Trap

Os3-RdstAddV2Trap

Os3RdstDelV
2Trap

.1.3.6.1.4.1.4641.6.2.4509

NA

NA

Os3-RdstDel-V2Trap

Os3-RdstDelV2Trap

Os3VIfAddV2 .1.3.6.1.4.1.4641.6.2.4510
Trap

NA

NA

Os3-VIfAdd-V2Trap

Os3-VIfAddV2Trap

Os3VIfDelV2
Trap

.1.3.6.1.4.1.4641.6.2.4511

NA

NA

Os3-VIfDel-V2Trap

Os3-VIfDel-V
2Trap

Os3VIfAtrV2
Trap

.1.3.6.1.4.1.4641.6.2.4512

NA

NA

Os3-VIfAtr-V2Trap

Os3-VIfAtr-V
2Trap

Os3AdminV2
Trap

.1.3.6.1.4.1.4641.6.2.4513

NA

NA

Os3-Admin-V2Trap

Os3-Admin-V
2Trap

Os3OlStChgV
2Trap

.1.3.6.1.4.1.4641.6.2.4514

NA

NA

Os3-OlStChg-V2Trap

Os3-OlStChgV2Trap

Os3OpUpV2T .1.3.6.1.4.1.4641.6.2.4515
rap

NA

NA

Os3-OpUp-V2Trap

Os3-OpUp-V2
Trap

Os3OpDownV .1.3.6.1.4.1.4641.6.2.4516
2Trap

NA

NA

Os3-OpDown-V2Trap

Os3-OpDownV2Trap

Os3NssaTRlV
2Trap

.1.3.6.1.4.1.4641.6.2.4517

NA

NA

Os3-NssaTRl-V2Trap

Os3-NssaTRlV2Trap

Os3NssaTStV
2Trap

.1.3.6.1.4.1.4641.6.2.4518

NA

NA

Os3-NssaTSt-V2Trap

Os3-NssaTStV2Trap

Os3AggrAddV .1.3.6.1.4.1.4641.6.2.4519
2Trap

NA

NA

Os3-AggrAdd-V2Trap

Os3-AggrAdd
-V2Trap

Os3AggrDelV
2Trap

.1.3.6.1.4.1.4641.6.2.4520

NA

NA

Os3-AggrDel-V2Trap

Os3-AggrDelV2Trap

Os3AggrChgV .1.3.6.1.4.1.4641.6.2.4521
2Trap

NA

NA

Os3-AggrChg-V2Trap

Os3-AggrChg
-V2Trap

Os3LsaHiThV .1.3.6.1.4.1.4641.6.2.4522
2Trap

NA

NA

Os3-LsaHiTh-V2Trap

Os3-LsaHiThV2Trap

Os3LsaLoThV .1.3.6.1.4.1.4641.6.2.4523
2Trap

NA

NA

Os3-LsaLoTh-V2Trap

Os3-LsaLoTh
-V2Trap

Os3MxLsaEx
V2Trap

.1.3.6.1.4.1.4641.6.2.4524

NA

NA

Os3-MxLsaEx-V2Trap

Os3-MxLsaEx
-V2Trap

Os3MxLsaClV .1.3.6.1.4.1.4641.6.2.4525
2Trap

NA

NA

Os3-MxLsaCl-V2Trap

Os3-MxLsaCl
-V2Trap

Os3RedHiThV .1.3.6.1.4.1.4641.6.2.4526
2Trap

NA

NA

Os3-RedHiTh-V2Trap

Os3-RedHiTh
-V2Trap

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-245

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap Name

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Os3RedLoTh
V2Trap

.1.3.6.1.4.1.4641.6.2.4527

NA

NA

Os3-RedLoTh-V2Trap

Os3-RedLoTh
-V2Trap

Os3MxRedEx
V2Trap

.1.3.6.1.4.1.4641.6.2.4528

NA

NA

Os3-MxRedEx-V2Trap

Os3-MxRedE
x-V2Trap

Os3MxRedCl
V2Trap

.1.3.6.1.4.1.4641.6.2.4529

NA

NA

Os3-MxRedCl-V2Trap

Os3-MxRedCl
-V2Trap

Os3ExIfChgV
2Trap

.1.3.6.1.4.1.4641.6.2.4530

NA

NA

Os3-ExIfChg-V2Trap

Os3-ExIfChgV2Trap

Os3ExVIfChV .1.3.6.1.4.1.4641.6.2.4531
2Trap

NA

NA

Os3-ExVIfCh-V2Trap

Os3-ExVIfCh
-V2Trap

Os3ExNbrCh
V2Trap

.1.3.6.1.4.1.4641.6.2.4532

NA

NA

Os3-ExNbrCh-V2Trap

Os3-ExNbrCh
-V2Trap

Os3ExVNbCh
V2Trap

.1.3.6.1.4.1.4641.6.2.4533

NA

NA

Os3-ExVNbCh-V2Trap

Os3-ExVNbC
h-V2Trap

Os3ExIfCErV
2Trap

.1.3.6.1.4.1.4641.6.2.4534

NA

NA

Os3-ExIfCEr-V2Trap

Os3-ExIfCErV2Trap

Os3XVIfCErV .1.3.6.1.4.1.4641.6.2.4535
2Trap

NA

NA

Os3-XVIfCEr-V2Trap

Os3-XVIfCEr
-V2Trap

Os3ExNbrDn
V2Trap

.1.3.6.1.4.1.4641.6.2.4536

NA

NA

Os3-ExNbrDn-V2Trap

Os3-ExNbrDn
-V2Trap

Os3XNbrGrR
V2Trap

.1.3.6.1.4.1.4641.6.2.4537

NA

NA

Os3-XNbrGrR-V2Trap

Os3-XNbrGrR
-V2Trap

Os3XNbrGrD
V2Trap

.1.3.6.1.4.1.4641.6.2.4538

NA

NA

Os3-XNbrGrD-V2Trap

Os3-XNbrGr
D-V2Trap

Os3XVNbGrR .1.3.6.1.4.1.4641.6.2.4539
V2Trap

NA

NA

Os3-XVNbGrR-V2Trap

Os3-XVNbGr
R-V2Trap

Os3XVNbGrD .1.3.6.1.4.1.4641.6.2.4540
V2Trap

NA

NA

Os3-XVNbGrD-V2Trap

Os3-XVNbGr
D-V2Trap

Os3ArDupRtV .1.3.6.1.4.1.4641.6.2.4541
2Trap

NA

NA

Os3-ArDupRt-V2Trap

Os3-ArDupRt
-V2Trap

Os3OrigLsaV
2Trap

.1.3.6.1.4.1.4641.6.2.4542

NA

NA

Os3-OrigLsa-V2Trap

Os3-OrigLsaV2Trap

Os3MaxAgLs
V2Trap

.1.3.6.1.4.1.4641.6.2.4543

NA

NA

Os3-MaxAgLs-V2Trap

Os3-MaxAgL
s-V2Trap

LacpGlbChV2 .1.3.6.1.4.1.4641.6.2.4600
Trap

NA

NA

Lacp-GlbCh-V2Trap

Lacp-GlbChV2Trap

LacpAdmnCh
V2Trap

NA

NA

Lacp-AdmnCh-V2Trap

Lacp-AdmnC
h-V2Trap

.1.3.6.1.4.1.4641.6.2.4601

Description

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-246

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

.1.3.6.1.4.1.4641.6.2.4602

NA

NA

Lacp-Up-V2Trap

Lacp-Up-V2T
rap

LacpDownV2
Trap

.1.3.6.1.4.1.4641.6.2.4603

NA

NA

Lacp-Down-V2Trap

Lacp-Down-V
2Trap

CertWarn1V2
Trap

.1.3.6.1.4.1.4641.6.2.5000

NA

NA

Cert-Warn1-V2Trap

Cert-Warn1-V
2Trap

CertWarn2V2
Trap

.1.3.6.1.4.1.4641.6.2.5001

NA

NA

Cert-Warn2-V2Trap

Cert-Warn2-V
2Trap

CertWarn3V2
Trap

.1.3.6.1.4.1.4641.6.2.5002

NA

NA

Cert-Warn3-V2Trap

Cert-Warn3-V
2Trap

IPSecEnaV2Tr .1.3.6.1.4.1.4641.6.2.5003
ap

NA

NA

IPSec-Ena-V2Trap

IPSec-Ena-V2
Trap

IPSecSaNegV
2Trap

.1.3.6.1.4.1.4641.6.2.5004

NA

NA

IPSec-SaNeg-V2Trap

IPSec-SaNegV2Trap

IPSecSaSucV2 .1.3.6.1.4.1.4641.6.2.5005
Trap

NA

NA

IPSec-SaSuc-V2Trap

IPSec-SaSucV2Trap

IPSecSaFldV2 .1.3.6.1.4.1.4641.6.2.5006
Trap

NA

NA

IPSec-SaFl-dV2Trap

IPSec-SaFl-d
V2Trap

IPSecSaDrpV
2Trap

.1.3.6.1.4.1.4641.6.2.5007

NA

NA

IPSec-SaDrp-V2Trap

IPSec-SaDrpV2Trap

IPSecDisV2Tr .1.3.6.1.4.1.4641.6.2.5008
ap

NA

NA

IPSec-Dis-V2Trap

IPSec-Dis-V2
Trap

BFGenSuccV2 .1.3.6.1.4.1.4641.6.2.5301
Trap

NA

NA

BF-GenSucc-V2Trap

BF-GenSuccV2Trap

BFGenErrV2T .1.3.6.1.4.1.4641.6.2.5302
rap

NA

NA

BF-GenErr-V2Trap

BF-GenErr-V
2Trap

BFTranSucV2
Trap

.1.3.6.1.4.1.4641.6.2.5303

NA

NA

BF-TranSuc-V2Trap

BF-TranSucV2Trap

BFTranErrV2
Trap

.1.3.6.1.4.1.4641.6.2.5304

NA

NA

BFTranErr-V2Trap

BFTranErr-V2
Trap

BFDelV2Trap

.1.3.6.1.4.1.4641.6.2.5305

NA

NA

BF-Del-V2Trap

BF-Del-V2Tra
p

BFInitV2Trap

.1.3.6.1.4.1.4641.6.2.5306

NA

NA

BF-Init-V2Trap

BF-Init-V2Tra
p

VptAttrChgV2 .1.3.6.1.4.1.4641.6.2.5401
Trap

NA

NA

Vpt-AttrChg-V2Trap

Vpt-AttrChgV2Trap

VptAddV2Tra
p

NA

NA

Vpt-Add-V2Trap

Vpt-Add-V2T
rap

Trap Name
LacpUpV2Tra
p

.1.3.6.1.4.1.4641.6.2.5402

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-247

Chapter 10

Traps

Tellabs V2 Traps

Table 10-27

Tellabs V2 Traps (Continued)

Trap OID

Subtype Subtype
Varbind Varbind
OID
Value

Description

.1.3.6.1.4.1.4641.6.2.5403

NA

NA

Vpt-Del-V2Trap

Vpt-Del-V2Tr
ap

.1.3.6.1.4.1.4641.6.2.5404

NA

NA

Vpt-Up-V2Trap

Vpt-Up-V2Tr
ap

VptDownV2Tr .1.3.6.1.4.1.4641.6.2.5405
ap

NA

NA

Vpt-Down-V2Trap

Vpt-Down-V2
Trap

OamSesEst

.1.3.6.1.4.1.4641.6.2.5600

NA

NA

Oam-SesEst-V2Trap

Oam-SesEstV2Trap

OamSesTerm
V2Trap

.1.3.6.1.4.1.4641.6.2.5601

NA

NA

Oam-SesTerm-V2Trap

Oam-SesTerm
-V2Trap

OamGlblChgV .1.3.6.1.4.1.4641.6.2.5602
2Trap

NA

NA

Oam-GlblChg-V2Trap

Oam-GlblChg
-V2Trap

OamLinkChg
V2Trap

.1.3.6.1.4.1.4641.6.2.5603

NA

NA

Oam-LinkChg-V2Trap

Oam-LinkChg
-V2Trap

OamLbStChg
V2Trap

.1.3.6.1.4.1.4641.6.2.5604

NA

NA

Oam-LbStChg-V2Trap

Oam-LbStChg
-V2Trap

PeerEvtSetV2
Trap

.1.3.6.1.4.1.4641.6.2.5605

NA

NA

Peer-EvtSet-V2Trap

Peer-EvtSet-V
2Trap

PeerEvtClrV2
Trap

.1.3.6.1.4.1.4641.6.2.5606

NA

NA

Peer-EvtClr-V2Trap

Peer-EvtClr-V
2Trap

OamTestChgV .1.3.6.1.4.1.4641.6.2.5607
2Trap

NA

NA

Oam-TestChg-V2Trap

Oam-TestChgV2Trap

Trap Name
VptDelV2Trap
VptUpV2Trap

Short
Description

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-248

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters

Alcatel-Lucent ASAM/ISAM V1 Traps Registry Parameters


Table 10-28 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent ASAM/ISAM V1 traps shown in Table 10-1.

Auto
Remove

Flapping

war F
n

alcatel OSPF if
Ospf
config error trap interface

IManagedEle F
ment

war F
n

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

Ospf interface
authentication
failure trap

alcatel OSPF if
auth failure trap

Expedites
Polling

Ospf
interface
trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent ASAM/ISAM V1 Trap Registry Parameters

Correlate

Table 10-28

trap

Ospf interface
config error
trap

alcatel OSPF if
rx bad packet
trap

Ospf
interface
trap

Ospf interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel OSPF if
state change
trap

Ospf
interface
trap

Ospf interface
state change
trap

IManagedEle F
ment

min F

IManagedEle F
ment

min F

alcatel OSPF nbr alcatel


alcatel Ospf
state change
Ospf trap neighbor state
trap
change trap
alcatel OSPF
alcatel
alcatel Ospd
originate lsa
Ospf trap originate lsa
trap
trap

IManagedEle F
ment

min F

IManagedEle F
ment

min F

alcatel Ent
config change

IManagedEle F
ment

min F

alcatel OSPF
alcatel
alcatel Ospf
max age lsa trap Ospf trap max age lsa

trap

alcatel
entity
configur
ation
change
trap

alcatel entity
configuration
change trap

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters


Table 10-29 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent ASAM/ISAM V2 traps shown in Table 10-2.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-249

Chapter 10

Traps

Alcatel-Lucent ASAM/ISAM V2Traps Registry Parameters

Auto
Remove

Flapping

min F

alcatel Warm
start trap

alcatel
alcatel warm
Warm
start trap
start trap

IManagedEle F
ment

1
9
0
0
0
0

info F

alcatel Link
down trap

alcatel
Link
down
trapp

alcatel link
down trap

IManagedEle F
ment

min T

alcatel Link up
trap

alcatel
Link
down
trap

alcatel link up
trap

IManagedEle F
ment

maj F

alcatel OSPF if
auth failure trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
authentication
failure trap

IManagedEle F
ment

min F

IManagedEle F
ment

w F
ar
n

interface
trap

alcatel Ospf
interface
config error
trap

alcatel OSPF if
rx bad packet
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
reception bad
packet trap

IManagedEle F
ment

w F
ar
n

alcatel OSPF tx
retransmit trap

alcatel
alcatel Ospf
Ospf trap transmission
retransmit trap

IManagedEle F
ment

m F
in

alcatel OSPF tx
retransmit trap

alcatel
alcatel Ospf
Ospf trap transmission
retransmit trap

IManagedEle F
ment

min F

alcatel OSPF if
alcatel
config error trap Ospf

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

alcatel
alcatel cold
Cold
start trap
start trap

Event
Type

Expedites
Polling

alcatel Cold
start trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent ASAM/ISAM V2 Traps Registry Parameters

Correlate

Table 10-29

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-250

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

alcatel BGP
down trap

alcatel
bgp-back
ward-tra
nsition-tr
ap-v2

N
alcatel
bgp-backwardtransition-trapv2

IBgpNeighbo F
urEntry

maj F

Severity

Is Correlation
Allowed

alcatel bgp
established
blished-t trap
rap-v2

Activate
Flow

IBgpNeighbo F
urEntry

alcatel BGP
alcatel
established trap bgp-esta

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Correlate

Alcatel-Lucent ASAM/ISAM V2 Traps Registry Parameters

Event
Subtype

Short
Description

Table 10-29

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters


Table 10-30 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent V1 traps shown in Table 10-3.

Auto
Remove

Flapping

min F

alcatel
Hdsl2shdsl loop
atten crossing
trap
alcatel
Hdsl2shdsl
loopback failure
trap
alcatel
Hdsl2shdsl
loopback failure
trap

alcatel
HDSL
trap

alcatel HDSL
Loop crossing
trap

IManagedEle F
ment

min F

alcatel
HDSL
trap

alcatel HDSL
loopback
failure trap

IManagedEle F
ment

min F

alcatel
HDSL
trap

alcatel HDSL
no neighbor
trap

IManagedEle F
ment

min F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

alcatel HDSL
Local power
loss trap

Event
Type

Expedites
Polling

alcatel
alcatel
Hdsl2shdsl local HDSL
power loss trap trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters

Correlate

Table 10-30

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-251

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

alcatel
Hdsl2shdsl perf
es thresh trap

alcatel
HDSL
trap

alcatel HDSL
performance
threshold trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl perf
los ws thresh
trap
alcatel
Hdsl2shdsl perf
ses thresh trap

alcatel
HDSL
trap

alcatel HDSL
performance
threshold trap

IManagedEle F
ment

min F

alcatel
HDSL
trap

alcatel HDSL
performance
threshold trap

IManagedEle F
ment

min F

alcatel DLSW
circuit down
trap

alcatel
DLSW
trap

alcatel DLSW
circuit down
trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl perf
uas thresh trap

alcatel
HDSL
trap

alcatel HDSL
performance
threshold trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl
power back off
trap
alcatel
Hdsl2shdsl
protocol init
failure trap

alcatel
HDSL
trap

alcatel HDSL N
power back off
trap

IManagedEle F
ment

min F

alcatel
HDSL
trap

alcatel HDSL
protocol
initiate failure
trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl snr
margin crossing
trap
alcatel
Hdsl2shdsl span
invalid num
repeaters trap

alcatel
HDSL
trap

alcatel HDSL
margin
crossinf trap

IManagedEle F
ment

min F

alcatel
HDSL
trap

alcatel HDSL
span invalid
number
repeating trap

IManagedEle F
ment

min F

alcatel New
Root trap

alcatel
alcatel New
New root root trap
trap

IManagedEle F
ment

war T
n

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

alcatel HDSL
performance
anomalies
threshold trap

Event Source
(IMO Name)

alcatel
HDSL
trap

Event
Type

Expedites
Polling

alcatel
Hdsl2shdsl perf
crc anomalies
thresh trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-30

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-252

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Auto
Remove

Flapping

war F
n

IManagedEle F
ment

war F
n

interface
trap

alcatel Ospf
interface
config error
trap

alcatel OSPF if
rx bad packet
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel OSPF if
state change
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface state
change trap

IManagedEle F
ment

min F

alcatel DLSW
transmit
connection
down trap

IManagedEle F
ment

min F

alcatel OSPF if
alcatel
config error trap Ospf

alcatel DLSW
alcatel
tconn down trap DLSW

trap

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

alcatel
Ospf
interface
trap

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

alcatel OSPF if
auth failure trap

Expedites
Polling

alcatel Ospf
interface
authentication
failure trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-30

alcatel OSPF
lsdb
approaching
overflow trap

alcatel
Ospf
lsdb trap

alcatel Ospf
lsdb
approaching
overflow trap

IManagedEle F
ment

min F

alcatel OSPF
lsdb
approaching
overflow trap
alcatel
Authentication
failure trap

alcatel
Ospf
lsdb trap

alcatel Ospf
lsdb overflow
trap

IManagedEle F
ment

min F

alcatel
Autentic
ation
failure
trap

alcatel
Autentication
failure trap

IManagedEle F
ment

info T

IManagedEle F
ment

min F

IManagedEle F
ment

min F

IManagedEle F
ment

min F

alcatel OSPF
alcatel
alcatel Ospf
max age lsa trap Ospf trap max age lsa

trap
alcatel OSPF nbr alcatel
alcatel Ospf
state change
Ospf trap neighbor state
trap
change trap
alcatel OSPF
alcatel
alcatel Ospd
originate lsa
Ospf trap originate lsa
trap
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-253

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

alcatel Ospf
virtual
interface
authentication
failure trap

IManagedEle F
ment

min F

IManagedEle F
ment

min F

interface
trap

alcatel Ospf
virtual
interface
configuration
error trap

alcatel
DLSW
trap

alcatel DLSW
tconn partner
reject trap

IManagedEle F
ment

min F

alcatel OSPF virt alcatel


if rx bad packet Ospf
trap
virtual

alcatel Ospf
virtual
interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
interface state
change trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
interface
transmission
retransmit trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
neighbor state
change trap

IManagedEle F
ment

min F

IManagedEle F
ment

1
9
0
0
0
0

info T

alcatel OSPF virt alcatel


if auth failure
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
if config error
Ospf
trap
virtual

alcatel DLSW
tconn partner
reject trap

interface
trap
alcatel OSPF virt alcatel
if state change
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
if tx retransmit
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
nbr state change Ospf
trap
virtual

interface
trap
alcatel Cold
start trap

Event
Subtype

alcatel
alcatel Cold
Cold
start trap
start trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

alcatel
alcatel Ospf
Ospf trap transmission
retransmit trap

Event Source
(IMO Name)

IManagedEle F
ment

alcatel OSPF tx
retransmit trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-30

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-254

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

alcatel Vrrp trap alcatel


new master trap vrrp trap

alcatel vrrp
new master
trap

IManagedEle F
ment

min F

alcatel Link
down trap

alcatel
link
down
trap

alcatel link
down trap

Y ip interface
oper status

IPhysicalLay
er1

maj F

alcatel Link up
trap

alcatel
link
down
trap

alcatel link up
trap

Y ip interface
oper status

IPhysicalLay
er1

clr

alcatel Warm
start trap

alcatel
alcatel warm
warm
start trap
start trap

IManagedEle F
ment

min T

alcatel DLSW
tconn prot
violation trap

alcatel
DLSW
trap

alcatel DLSW
tconn protocol
violation trap

IManagedEle F
ment

min F

alcatel X25 reset alcatel


trap
x25 trap

alcatel x25
reset trap

IManagedEle F
ment

min F

alcatel X25
restart trap

alcatel
x25 trap

alcatel x25
restart trap

IManagedEle F
ment

min F

alcatel Dummy
ticket trap

alcatel
dummy
ticket
trap

alcatel dummy
ticket trap

IManagedEle F
ment

info F

alcatel tcp
connection
table trap

IManagedEle F
ment

info F

alcatel TCP
alcatel
connection table tcp
trap
connecti

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

alcatel vrrp
authentication
failure trap

Event
Type

Expedites
Polling

alcatel Vrrp trap alcatel


auth failure trap vrrp trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-30

on table
trap
alcatel Link
down trap

alcatel
link
down
trap

alcatel link
down trap

Y ip interface
oper status

IPhysicalLay
er1

maj F

alcatel Link up
trap

alcatel
link
down
trap

alcatel link up
trap

Y ip interface
oper status

IPhysicalLay
er1

clr

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-255

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V1 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl dc
continuity fault
trap
Riverstone
environment
power supply
failed

alcatel
HDSL
trap

alcatel HDSL
dc continuity
fault trap

IManagedEle F
ment

min F

Riversto
ne
environ
ment
power
supply
failed

riverstone
environment
power supply
failed

NA

NA

info F

Riverstone
environment
power supply
recovered trap

Riversto
ne
environ
ment
power
supply
failed

riverstone
environment
power supply
recovered

NA

NA

clr

Riverstone
environment
swap in trap

Riversto
ne
environ
ment
swap in

riverstone
environment
swap out

NA

NA

clr

Riverstone
environment
swap out trap

Riversto
ne
environ
ment
swap in

riverstone
environment
swap in

NA

NA

maj T

Riverstone
Riversto
environment fan ne
failed trap
environ

riverstone
environment
fan failed

NA

NA

info F

riverstone
environment
fan recovered

NA

NA

clr

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

alcatel HDSL
configuration
initiate failure
trap

Activate
Flow

alcatel
HDSL
trap

Event
Type

Event Source
(IMO Name)

alcatel
Hdsl2shdsl
config init
failure trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-30

ment fan
failed
Riverstone
Riversto
environment fan ne
recovered trap
environ

ment fan
failed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-256

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

NA

NA

info F

Riverstone
environment
temperature
normal trap

Riversto
ne
environ
ment
temperat
ure
exceeded

riverstone
environment
temperature
normal

NA

NA

clr

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

riverstone
environment
temperature
exceeded

Severity

Is Correlation
Allowed

Riversto
ne
environ
ment
temperat
ure
exceeded

Event
Type

Event Source
(IMO Name)

Riverstone
environment
temperature
exceeded trap

Short
Description

Correlate

Alcatel-Lucent 7450 ESS V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-30

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters


Table 10-31 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent V2 traps shown in Table 10-4.

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

sbi boot snmpd

SBI Boot Sbi boot snmp


trap
trap

IManagedEle F
ment

clr

ssi saveconfig
failed

SSI
config
change
trap

Ssi save config N


failed trap

IManagedEle F
ment

min F

Event
Subtype

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

SBI Boot Sbi boot config N


trap
trap

Event
Type

Expedites
Polling

sbi boot config

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Correlate

Table 10-31

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-257

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

tmnx config
create

TMNX
config
change
trap

tmnx config
create trap

IManagedEle F
ment

info F

tmnx config
delete

TMNX
config
change
trap

tmnx config
delete trap

IManagedEle F
ment

info F

tmnx config
modify

TMNX
config
change
trap

tmnx config
modify trap

IManagedEle F
ment

info F

tmnx env temp


too high

TMNX
tmnx
environ
environment
ment trap temperature
high trap

IManagedEle F
ment

cri

tmnx eq card
failure

TMNX
eq Card
trap

tmnc eq card
failure trap

IPhysicalLay
er1

maj F

tmnx eq card
inserted

TMNX
eq Card
trap

tmnc eq card
inserted trap

IPhysicalLay
er1

info F

tmnx eq card
removed

TMNX
eq Card
trap

tmnc eq card
removed trap

IPhysicalLay
er1

maj F

tmnx eq fan
failure

TMNX
eq fan
trap

tmnc eq fan
failure trap

IManagedEle F
ment

cri

tmnx eq flash
disk full

TMNX
eq flash
trap

tmnx eq flash
disk full trap

IManagedEle F
ment

info F

IPhysicalLay
er1

info F

tmnx eq port ds1 TMNX


alarm clear
eq port

Event
Subtype

tmnx eq port
N
ds1 alarm clear
d1 alarm trap
trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Ssi save config N


succeeded trap

Event Source
(IMO Name)

SSI
config
change
trap

Event
Type

Expedites
Polling

ssi saveconfig
succeeded

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters (Continued)

Correlate

Table 10-31

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-258

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

min F

tmnx eq port
N
ds3 alarm clear
d3 alarm trap
trap

IPhysicalLay
er1

info F

Is Ticketable

Is Correlation
Allowed

tmnx eq port
ds1 alarm trap

Severity

Correlate

IPhysicalLay
er1

tmnx eq port ds1 TMNX


alarm
eq port

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Activate
Flow

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-31

d1 alarm
trap
tmnx eq port ds3 TMNX
alarm clear
eq port

tmnx eq port ds3 TMNX


alarm
eq port

tmnx eq port
ds3 alarm trap

IPhysicalLay
er1

min F

d3 alarm
trap
tmnx eq port
error

TMNX
eq port
trap

tmnx eq port
error trap

IPhysicalLay
er1

min F

tmnx eq port
ether alarm
clear

TMNX
eq port
trap

tmnx eq port
ether alarm
clear trap

IPhysicalLay
er1

info F

tmnx eq port
ether alarm

TMNX
eq port
trap

tmnx eq port
ether alarm
trap

IPhysicalLay
er1

min F

tmnx eq port sfp


inserted

TMNX
eq port
trap

tmnx eq port
sfp inserted
trap

IPhysicalLay
er1

info F

tmnx eq port sfp


removed

TMNX
eq port
trap

tmnx eq port
sfp removed
trap

IPhysicalLay
er1

maj F

tmnx eq port
sonet alarm
clear

TMNX
eq port
trap

ymnx eq port
sonet alarm
clear trap

IPhysicalLay
er1

info F

tmnx eq port
sonet alarm

TMNX
eq port
trap

ymnx eq port
sonet alarm
trap

IPhysicalLay
er1

min F

tmnx eq power
supply failure

TMNX
eq port
trap

tmnx eq port
power supply
failure trap

IManagedEle F
ment

cri

tmnx eq power
supply inserted

TMNX
eq port
trap

tmnx eq port
power supply
inserted trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-259

Chapter 10

Traps

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

tmnx red primary TMNX


cpm fail
red

primary
cpm fail
trap

Auto
Remove

Flapping

maj F

IPhysicalLay
er1

maj F

Is Ticketable

IManagedEle F
ment

Severity

Auto Clear

TMNX
tmnx eq wrong N
wrong
card trap
card trap

Weight

tmnx eq wrong
card

tmnx eq port
power supply
removed trap

Is Correlation
Allowed

TMNX
eq port
trap

Correlate

tmnx eq power
supply removed

Activate
Flow

Event
Type

Event Source
(IMO Name)

Event
Subtype

Expedites
Polling

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters (Continued)

Short
Description

Table 10-31

tmnx red
primary cpm
fail trap

IPhysicalLay
er1

maj F

tmnx state
change

TMNX
state
change
trap

tmnx state
change trap

IManagedEle F
ment

min F

alcatel Cold
start trap

alcatel
alcatel cold
Cold
start trap
start trap

IManagedEle F
ment

1
9
0
0
0
0

info F

alcatel Warm
start trap

alcatel
alcatel warm
Warm
start trap
start trap

IManagedEle F
ment

min T

alcatel Link
down trap

alcatel
Link
down
trap

alcatel link
down trap

IManagedEle F
ment

maj F

alcatel Link up
trap

alcatel
Link
down
trap

alcatel link up
trap

IManagedEle F
ment

clr

BGP trap

BGP trap bgp trap

IManagedEle F
ment

info F

alcatel
Hdsl2shdsl
device fault V2
trap

alcatel HDSL
alcatel
device fault
HDSL
trap
device
fault trap

IManagedEle F
ment

min F

IBgpNeighbo F
urEntry

clr

alcatel BGP
alcatel
established trap bgp-esta

alcatel bgp
established
blished-t trap
rap-v2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-260

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

alcatel OSPF if
auth failure trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
authentication
failure trap

IManagedEle F
ment

war F
n

IManagedEle F
ment

war F
n

interface
trap

alcatel Ospf
interface
config error
trap

alcatel OSPF if
rx bad packet
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel OSPF if
state change
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface state
change trap

alcatel OSPF if
alcatel
config error trap Ospf

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IBgpNeighbo F
urEntry

Activate
Flow

N
alcatel
bgp-backwardtransition-trapv2

Event Source
(IMO Name)

alcatel
bgp-back
ward-tra
nsition-tr
ap-v2

Event
Type

Expedites
Polling

alcatel BGP
down trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7450 ESS V2 Traps Registry Parameters (Continued)

Correlate

Table 10-31

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-261

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters

Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters


Table 10-32 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent 7750/7710 SR V1 traps shown in Table 10-6.

IManagedEle F
ment

alcatel DLSW
circuit down
trap

alcatel
DLSW
trap

alcatel DLSW
circuit down
trap

IManagedEle F
ment

alcatel DLSW
alcatel
tconn down trap DLSW

alcatel DLSW
transmit
connection
down trap

IManagedEle F
ment

trap

Flapping

Auto Clear

Auto
Remove

Weight

alcatel
alcatel HDSL
HDSL trap performance
threshold trap

Is Ticketable

Is Correlation
Allowed

alcatel
Hdsl2shdsl perf
ses thresh trap

Severity

Correlate

Activate
Flow

Event Source
(IMO Name)

Event
Subtype

Event Type

Expedites
Polling

Alcatel-Lucent 7750/7710 SR V1 Trap Registry Parameters

Short
Description

Table 10-32

min F

min F

min F

alcatel DLSW
tconn partner
reject trap

alcatel
DLSW
trap

alcatel DLSW
tconn partner
reject trap

IManagedEle F
ment

min F

alcatel DLSW
tconn prot
violation trap

alcatel
DLSW
trap

alcatel DLSW
tconn protocol
violation trap

IManagedEle F
ment

min F

alcatel FR DLCI
status change
trap

alcatel
frame
relay dlci
status trap

alcatel frame
relay dlci
status change
trap

IPhysicalLay
er1

maj F

IManagedEle F
ment

min F

IManagedEle F
ment

min F

IManagedEle F
ment

min F

IManagedEle F
ment

min F

alcatel
alcatel
alcatel HDSL
Hdsl2shdsl local HDSL trap Local power
power loss trap
loss trap
alcatel
alcatel
alcatel HDSL
Hdsl2shdsl loop HDSL trap Loop crossing
atten crossing
trap
trap
alcatel
alcatel
alcatel HDSL
Hdsl2shdsl
HDSL trap loopback
loopback failure
failure trap
trap
alcatel
alcatel
alcatel HDSL
Hdsl2shdsl
HDSL trap no neighbor
loopback failure
trap
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-262

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters

min F

alcatel
Hdsl2shdsl perf
es thresh trap

alcatel
alcatel HDSL
HDSL trap performance
threshold trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl perf
los ws thresh
trap
alcatel
Hdsl2shdsl perf
uas thresh trap

alcatel
alcatel HDSL
HDSL trap performance
threshold trap

IManagedEle F
ment

min F

alcatel
alcatel HDSL
HDSL trap performance
threshold trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl
power back off
trap
alcatel
Hdsl2shdsl
protocol init
failure trap

alcatel
alcatel HDSL N
HDSL trap power back off
trap

IManagedEle F
ment

min F

alcatel
alcatel HDSL
HDSL trap protocol
initiate failure
trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl snr
margin crossing
trap
alcatel
Hdsl2shdsl span
invalid num
repeaters trap

alcatel
alcatel HDSL
HDSL trap margin
crossinf trap

IManagedEle F
ment

min F

alcatel
alcatel HDSL
HDSL trap span invalid
number
repeating trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl
config init
failure trap

alcatel
alcatel HDSL
HDSL trap configuration
initiate failure
trap

IManagedEle F
ment

min F

alcatel
Hdsl2shdsl dc
continuity fault
trap
alcatel Ent
config change

alcatel
alcatel HDSL
HDSL trap dc continuity
fault trap

IManagedEle F
ment

min F

alcatel entity
alcatel
configuration
entity
configurati change trap
on change
trap

IManagedEle F
ment

min F

Auto
Remove

Event
Subtype

Flapping

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

alcatel
alcatel HDSL
HDSL trap performance
anomalies
threshold trap

Event Type

Expedites
Polling

alcatel
Hdsl2shdsl perf
crc anomalies
thresh trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7750/7710 SR V1 Trap Registry Parameters (Continued)

Correlate

Table 10-32

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-263

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters

Is Ticketable

war F
n

war F
n

min F

min F

IManagedEle F
ment

min F

alcatel Ospf
lsdb overflow
trap

IManagedEle F
ment

min F

alcatel Ospf
max age lsa
trap

IManagedEle F
ment

min F

alcatel OSPF nbr alcatel


state change
Ospf trap
trap

alcatel Ospf
neighbor state
change trap

IPhysicalLay
er1

min F

alcatel OSPF
originate lsa
trap

alcatel
Ospf trap

alcatel Ospd
originate lsa
trap

IManagedEle F
ment

min F

alcatel OSPF tx
retransmit trap

alcatel
Ospf trap

alcatel Ospf
transmission
retransmit trap

IManagedEle F
ment

min F

alcatel New
root trap

IManagedEle F
ment

alcatel OSPF if
auth failure trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
authentication
failure trap

IPhysicalLay
er1

IPhysicalLay
er1

interface
trap

alcatel Ospf
interface
config error
trap

alcatel OSPF if
rx bad packet
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
reception bad
packet trap

IPhysicalLay
er1

alcatel OSPF if
state change
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface state
change trap

IPhysicalLay
er1

alcatel OSPF
lsdb
approaching
overflow trap

alcatel
Ospf lsdb
trap

alcatel Ospf
lsdb
approaching
overflow trap

alcatel OSPF
lsdb
approaching
overflow trap
alcatel OSPF
max age lsa trap

alcatel
Ospf lsdb
trap
alcatel
Ospf trap

alcatel OSPF if
alcatel
config error trap Ospf

Auto
Remove

Event
Subtype

alcatel
New root
trap

Flapping

alcatel New
Root trap

Severity

Auto Clear

war T
n

Correlate

Activate
Flow

Event Type

Expedites
Polling

Weight

Is Correlation
Allowed

Event Source
(IMO Name)

Alcatel-Lucent 7750/7710 SR V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-32

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-264

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V1 Traps Registry Parameters

min F

alcatel Ospf
virtual
interface
configuration
error trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
interface state
change trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
interface
transmission
retransmit trap

IManagedEle F
ment

min F

alcatel Ospf
virtual
neighbor state
change trap

IManagedEle F
ment

min F

alcatel TCP
alcatel tcp alcatel tcp
connection table connection connection
trap
table trap table trap

IManagedEle F
ment

info F

alcatel Vrrp trap alcatel


auth failure trap vrrp trap

alcatel vrrp
authentication
failure trap

IManagedEle F
ment

min F

alcatel Vrrp trap alcatel


new master trap vrrp trap

alcatel vrrp
new master
trap

IManagedEle F
ment

min F

alcatel X25 reset alcatel x25 alcatel x25


trap
trap
reset trap

IManagedEle F
ment

min F

interface
trap
alcatel OSPF virt alcatel
if config error
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
if rx bad packet Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
if state change
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
if tx retransmit
Ospf
trap
virtual

interface
trap
alcatel OSPF virt alcatel
nbr state change Ospf
trap
virtual

interface
trap

Auto
Remove

Event
Subtype

Flapping

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Event Type

alcatel OSPF virt alcatel


if auth failure
Ospf
trap
virtual

Expedites
Polling

alcatel Ospf
virtual
interface
authentication
failure trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7750/7710 SR V1 Trap Registry Parameters (Continued)

Correlate

Table 10-32

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-265

Chapter 10

Traps

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

min F

alcatel
Authentication
failure trap

alcatel
Autenticat
ion failure
trap

alcatel
Autentication
failure trap

IManagedEle F
ment

info T

Auto
Remove

Expedites
Polling

Flapping

Auto Clear

Is Ticketable

Weight

IManagedEle F
ment

Severity

Is Correlation
Allowed

alcatel x25 alcatel x25


trap
restart trap

Activate
Flow

Event
Subtype

Event Type

alcatel X25
restart trap

Event Source
(IMO Name)

Correlate

Alcatel-Lucent 7750/7710 SR V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-32

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters


Table 10-33 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent 7705 SAR V2 traps shown in Table 10-5.

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

sbi boot snmpd

SBI Boot Sbi boot snmp


trap
trap

IManagedEle F
ment

clr

ssi saveconfig
failed

SSI
config
change
trap

Ssi save config N


failed trap

IManagedEle F
ment

min F

ssi saveconfig
succeeded

SSI
config
change
trap

Ssi save config N


succeeded trap

IManagedEle F
ment

info F

tmnx config
create

TMNX
config
change
trap

tmnx config
create trap

IManagedEle F
ment

info F

tmnx config
delete

TMNX
config
change
trap

tmnx config
delete trap

IManagedEle F
ment

info F

Event
Subtype

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

SBI Boot Sbi boot config N


trap
trap

Event
Type

Expedites
Polling

sbi boot config

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7705 SAR V2 Trap Registry Parameters

Correlate

Table 10-33

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-266

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

tmnx env temp


too high

TMNX
tmnx
environ
environment
ment trap temperature
high trap

IManagedEle F
ment

cri

tmnx eq fan
failure

TMNX
eq fan
trap

tmnc eq fan
failure trap

IManagedEle F
ment

cri

tmnx eq flash
disk full

TMNX
eq flash
trap

tmnx eq flash
disk full trap

IManagedEle F
ment

info F

tmnx eq port
N
ds1 alarm clear
d1 alarm trap
trap

IManagedEle F
ment

info F

IManagedEle F
ment

min F

N
tmnx eq port
ds3 alarm clear
d3 alarm trap
trap

IManagedEle F
ment

info F

Event
Subtype

tmnx eq port ds1 TMNX


alarm clear
eq port

tmnx eq port ds1 TMNX


alarm
eq port

tmnx eq port
ds1 alarm trap

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

tmnx config
modify trap

Event Source
(IMO Name)

TMNX
config
change
trap

Event
Type

Expedites
Polling

tmnx config
modify

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7705 SAR V2 Trap Registry Parameters (Continued)

Correlate

Table 10-33

d1 alarm
trap
tmnx eq port ds3 TMNX
alarm clear
eq port

tmnx eq port ds3 TMNX


alarm
eq port

tmnx eq port
ds3 alarm trap

IManagedEle F
ment

min F

d3 alarm
trap
tmnx eq port
error

TMNX
eq port
trap

tmnx eq port
error trap

IPhysicalLay
er1

min F

tmnx eq port
ether alarm
clear

TMNX
eq port
trap

tmnx eq port
ether alarm
clear trap

IPhysicalLay
er1

info F

tmnx eq port
ether alarm

TMNX
eq port
trap

tmnx eq port
ether alarm
trap

IPhysicalLay
er1

min F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-267

Chapter 10

Traps

Alcatel-Lucent 7705 SAR V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

IPhysicalLay
er1

info F

tmnx eq port sfp


removed

TMNX
eq port
trap

tmnx eq port
sfp removed
trap

IPhysicalLay
er1

maj F

tmnx eq port
sonet alarm
clear

TMNX
eq port
trap

ymnx eq port
sonet alarm
clear trap

IManagedEle F
ment

info F

tmnx eq port
sonet alarm

TMNX
eq port
trap

ymnx eq port
sonet alarm
trap

IManagedEle F
ment

min F

tmnx eq power
supply failure

TMNX
eq port
trap

tmnx eq port
power supply
failure trap

IManagedEle F
ment

cri

tmnx eq power
supply inserted

TMNX
eq port
trap

tmnx eq port
power supply
inserted trap

IManagedEle F
ment

info F

tmnx eq power
supply removed

TMNX
eq port
trap

tmnx eq port
power supply
removed trap

IManagedEle F
ment

maj F

tmnx state
change

TMNX
state
change
trap

tmnx state
change trap

IManagedEle F
ment

min F

alcatel Cold
start trap

alcatel
Cold
start
trapp

alcatel cold
start trap

IManagedEle F
ment

1
9
0
0
0
0

info F

alcatel Warm
start trap

alcatel
alcatel warm
Warm
start trap
start trap

IManagedEle F
ment

min T

alcatel Link
down trap

alcatel
Link
down
trap

alcatel link
down trap

IManagedEle F
ment

maj F

alcatel Link up
trap

alcatel
Link Up
trap

alcatel link up
trap

IManagedEle F
ment

clr

Event
Subtype

Is Ticketable

Weight

Severity

Is Correlation
Allowed

tmnx eq port
sfp inserted
trap

Event Source
(IMO Name)

TMNX
eq port
trap

Event
Type

Expedites
Polling

tmnx eq port sfp


inserted

Short
Description

Correlate

Alcatel-Lucent 7705 SAR V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-33

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-268

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Severity

Is Correlation
Allowed

Activate
Flow

IBgpNeighbo F
urEntry

alcatel BGP
alcatel
established trap bgp-esta

Event Source
(IMO Name)

alcatel alcatel N
bgp established
blished-t trap
rap-v2

Event
Type

Expedites
Polling

Correlate

Alcatel-Lucent 7705 SAR V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-33

alcatel BGP
down trap

alcatel
bgp-back
ward-tra
nsition-tr
ap-v2

alcatel alcatel N
bgp-backwardtransition-trapv2

IBgpNeighbo F
urEntry

maj F

alcatel OSPF if
auth failure trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
authentication
failure trap

IManagedEle T
ment

war F
n

IManagedEle F
ment

war F
n

interface
trap

alcatel Ospf
interface
config error
trap

alcatel OSPF if
rx bad packet
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
reception bad
packet trap

IManagedEle F
ment

min F

alcatel OSPF if
state change
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface state
change trap

IManagedEle F
ment

min F

alcatel OSPF if
alcatel
config error trap Ospf

Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters


Table 10-34 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Alcatel-Lucent 7750/7710 SR V2 traps shown in Table 10-7.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-269

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

sbi boot snmpd

SBI Boot Sbi boot snmp


trap
trap

IManagedEle F
ment

clr

ssi saveconfig
failed

SSI
config
change
trap

Ssi save config N


failed trap

IManagedEle F
ment

min F

ssi saveconfig
succeeded

SSI
config
change
trap

Ssi save config N


succeeded trap

IManagedEle F
ment

info F

tmnx config
create

TMNX
config
change
trap

tmnx config
create trap

IManagedEle F
ment

info F

tmnx config
delete

TMNX
config
change
trap

tmnx config
delete trap

IManagedEle F
ment

info F

tmnx config
modify

TMNX
config
change
trap

tmnx config
modify trap

IManagedEle F
ment

info F

tmnx env temp


too high

TMNX
tmnx
environ
environment
ment trap temperature
high trap

IManagedEle F
ment

cri

tmnx eq fan
failure

TMNX
eq fan
trap

tmnc eq fan
failure trap

IManagedEle F
ment

cri

tmnx eq flash
disk full

TMNX
eq flash
trap

tmnx eq flash
disk full trap

IManagedEle F
ment

info F

tmnx eq port
N
ds1 alarm clear
d1 alarm trap
trap

IManagedEle F
ment

info F

tmnx eq port ds1 TMNX


alarm clear
eq port

Event
Subtype

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

SBI Boot Sbi boot config N


trap
trap

Event
Type

Expedites
Polling

sbi boot config

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7750/7710 SR V2 Trap Registry Parameters

Correlate

Table 10-34

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-270

OL-24429-01

Chapter 10

Traps
Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min F

tmnx eq port
N
ds3 alarm clear
d3 alarm trap
trap

IManagedEle F
ment

info F

Is Ticketable

Weight

Severity

Is Correlation
Allowed

tmnx eq port
ds1 alarm trap

Activate
Flow

IManagedEle F
ment

tmnx eq port ds1 TMNX


alarm
eq port

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Correlate

Alcatel-Lucent 7750/7710 SR V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-34

d1 alarm
trap
tmnx eq port ds3 TMNX
alarm clear
eq port

tmnx eq port ds3 TMNX


alarm
eq port

tmnx eq port
ds3 alarm trap

IManagedEle F
ment

min F

d3 alarm
trap
tmnx eq port
error

TMNX
eq port
trap

tmnx eq port
error trap

IPhysicalLay
er1

min F

tmnx eq port
ether alarm
clear

TMNX
eq port
trap

tmnx eq port
ether alarm
clear trap

IPhysicalLay
er1

info F

tmnx eq port
ether alarm

TMNX
eq port
trap

tmnx eq port
ether alarm
trap

IPhysicalLay
er1

min F

tmnx eq port sfp


inserted

TMNX
eq port
trap

tmnx eq port
sfp inserted
trap

IPhysicalLay
er1

info F

tmnx eq port sfp


removed

TMNX
eq port
trap

tmnx eq port
sfp removed
trap

IPhysicalLay
er1

maj F

tmnx eq port
sonet alarm
clear

TMNX
eq port
trap

ymnx eq port
sonet alarm
clear trap

IManagedEle F
ment

info F

tmnx eq port
sonet alarm

TMNX
eq port
trap

ymnx eq port
sonet alarm
trap

IManagedEle F
ment

min F

tmnx eq power
supply failure

TMNX
eq port
trap

tmnx eq port
power supply
failure trap

IManagedEle F
ment

cri

tmnx eq power
supply inserted

TMNX
eq port
trap

tmnx eq port
power supply
inserted trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-271

Chapter 10

Traps

Alcatel-Lucent 7750/7710 SR V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

tmnx state
change

TMNX
state
change
trap

tmnx state
change trap

IManagedEle F
ment

min F

alcatel Cold
start trap

alcatel
alcatel cold
Cold
start trap
start trap

IManagedEle F
ment

1
9
0
0
0
0

info F

alcatel Warm
start trap

alcatel
alcatel warm
Warm
start trap
start trap

IManagedEle F
ment

min T

alcatel Link
down trap

alcatel
Link
down
trap

alcatel link
down trap

IManagedEle F
ment

maj F

alcatel Link up
trap

alcatel
Link Up
trap

alcatel link Up N
trap

IManagedEle F
ment

clr

alcatel alcatel N
bgp established
blished-t trap
rap-v2

IBgpNeighbo F
urEntry

clr

Event
Subtype

alcatel BGP
alcatel
established trap bgp-esta

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

tmnx eq port
power supply
removed trap

Event Source
(IMO Name)

TMNX
eq port
trap

Event
Type

Expedites
Polling

tmnx eq power
supply removed

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7750/7710 SR V2 Trap Registry Parameters (Continued)

Correlate

Table 10-34

alcatel BGP
down trap

alcatel
bgp-back
ward-tra
nsition-tr
ap-v2

alcatel alcatel N
bgp-backwardtransition-trapv2

IBgpNeighbo F
urEntry

maj F

alcatel OSPF if
auth failure trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface
authentication
failure trap

IManagedEle F
ment

war F
n

alcatel Ospf
interface
config error
trap

IManagedEle F
ment

war F
n

alcatel OSPF if
alcatel
config error trap Ospf

interface
trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-272

OL-24429-01

Chapter 10

Traps
Calix V2 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

min F

alcatel OSPF if
state change
trap

alcatel
Ospf
interface
trap

alcatel Ospf
interface state
change trap

IManagedEle F
ment

min F

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

alcatel Ospf
interface
reception bad
packet trap

Activate
Flow

alcatel
Ospf
interface
trap

Event
Type

Event Source
(IMO Name)

alcatel OSPF if
rx bad packet
trap

Short
Description

Is Correlation
Allowed

Alcatel-Lucent 7750/7710 SR V2 Trap Registry Parameters (Continued)

Correlate

Table 10-34

Calix V2 Traps Registry Parameters


Table 10-35 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Forigate V2 traps shown in Table 10-8.

Auto
Remove

Flapping

1
9
0
0
0
0

maj T

SNMP Link
down

snmp
link
down

snmp link
down

IPhysicalLay
er

cri

SNMP Link up

snmp
link
down

snmp link up

IPhysicalLay
er

clr

mainPower

IModule

clr

Power source
power
changed to Main mgmt
power
power

Expedites
Polling

Event
Subtype

Is Ticketable

Severity

Auto Clear

IManagedEle F
ment

Weight

Activate
Flow

cold start cold start trap


trap

Event
Type

Event Source
(IMO Name)

Cold start trap

Short
Description

Is Correlation
Allowed

Calix V2 Trap Registry Parameters

Correlate

Table 10-35

source

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-273

Chapter 10

Traps

Calix V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

cri

eps Ring eps Ring


Failover Failover

IManagedEle F
ment

maj T

eps Ring eps Ring


Failover Revert

IManagedEle F
ment

clr

eps Path eps Path Group N


Heartbeat Up
Group
Heartbea
t

IManagedEle F
ment

clr

eps Path Group eps Path eps Path Group N


Heartbeat Down Group
Heartbeat
Notification
Heartbea Down

IManagedEle F
ment

maj T

Power source
changed to
Battery power

power
mgmt
power
source

eps Ring
Failover
Notification
eps Ring Revert
Notification
eps Path Group
Heartbeat Up
Notification

Expedites
Polling

Event
Subtype
batteryPower

Severity

Is Correlation
Allowed

IModule

Event
Type

Event Source
(IMO Name)

Short
Description

Correlate

Calix V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-35

t
eps Loop
Notification
detected

eps Loop eps loop


notification
detected

IManagedEle F
ment

maj T

eps Loop
Notification
cleared

eps Loop eps loop


notification
cleared

IManagedEle F
ment

clr

ac power status
changed to on

ac power acPower on
status
change

IModule

clr

ac power status
changed to off

ac power acPower off


status
change

IModule

cri

fan tray
inserted

IModule

clr

fan tray
removed

IModule

maj T

bvi invalid
dhcp address
alarm

IManagedEle F
ment

cri

fan tray inserted fan tray

status
change
fan tray removed fan tray

status
change
bvi invalid dhcp
address alarm

bvi
Invalid
Dhcp
Address

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-274

OL-24429-01

Chapter 10

Traps
Calix V2 Traps Registry Parameters

Dhcp
Address

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Severity

Weight

IManagedEle F
ment

Activate
Flow

Is Correlation
Allowed

Correlate

bvi invalid
dhcp address
cleared

Event Source
(IMO Name)

Event
Type

bvi invalid dhcp bvi


address cleared Invalid

Expedites
Polling

Calix V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-35

subscriber port
black listing
disabled

subscrib subscriber port N


blacklisting
er port
blacklisti disabled
ng

IPhysicalLay
er

maj T

subscriber port
black listing
cleared

subscrib subscriber port N


blacklisting
er port
blacklisti cleared
ng

IPhysicalLay
er

clr

client queue
threshold
reached

client
client queue
queue
threshold
threshold reached

IManagedEle F
ment

maj T

client queue
threshold
cleared

client
client queue
queue
threshold
threshold cleared

IManagedEle F
ment

clr

client queue
packet drop

client
queue
packet
drop

packet dropped N

IManagedEle F
ment

maj T

IManagedEle F
ment

clr

ingress filter
mask threshold
reached

ingress filter
N
ingress
mask threshold
filter
reached
mask
threshold

IManagedEle F
ment

maj T

ingress filter
mask threshold
cleared

ingress filter
N
ingress
mask threshold
filter
cleared
mask
threshold

IManagedEle F
ment

clr

ingress filter
mask resources
exhausted

ingress
filter
mask
resource
s

ingress filter
N
mask resources
exhausted

IManagedEle F
ment

maj T

client queue
client
packet no longer queue
dropping
packet

packet no
longer
dropping

drop

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-275

Chapter 10

Traps

Calix V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

IManagedEle F
ment

maj T

ingress
ingress filter
filter rule rule threshold
threshold cleared

IManagedEle F
ment

clr

ingress filter
rule resources
exhausted

ingress filter
ingress
filter rule rule resources
resource exhausted
s

IManagedEle F
ment

maj T

ingress filter
rule resources
notExhausted

ingress filter
ingress
filter rule rule resources
resource notExhausted
s

IManagedEle F
ment

clr

fan high limit


exceeded

fan limit HighLimitExc


exceeded eeded

IModule

cri

fan low limit


exceeded

fan limit LowLimitExce N


exceeded eded

IModule

cri

fan limit
exceeded
cleared
fan fast speed

fan limit LimitExceeded N


exceeded Cleared

IModule

clr

fan speed FanFastSpeed

IModule

maj T

fan slow speed

fan speed FanSlowSpeed N

IModule

maj T

temp high limit


exceeded

temp
HighLimitExc
limit
eeded
exceeded

IManagedEle F
ment

maj T

temp low limit


exceeded

temp
LowLimitExce N
limit
eded
exceeded

IManagedEle F
ment

maj T

temp limit
exceeded
cleared

temp
LimitExceeded N
limit
Cleared
exceeded

IManagedEle F
ment

clr

voltage high
limit exceeded

voltage
HighLimitExc
limit
eeded
exceeded

IModule

maj T

Expedites
Polling

Event
Subtype

ingress
filter
mask
resource
s

ingress filter
rule threshold
reached

ingress
ingress filter
filter rule rule threshold
threshold reached

ingress filter
rule threshold
cleared

ingress filter
N
mask resources
notExhausted

Severity

Weight

ingress filter
mask resources
notExhausted

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Calix V2 Trap Registry Parameters (Continued)

Correlate

Table 10-35

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-276

OL-24429-01

Chapter 10

Traps
Calix V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj T

voltage limit
exceeded
cleared

voltage
LimitExceeded N
limit
Cleared
exceeded

IModule

clr

dsl modem
showtime in

dsl
modem
showtim
e

dsl modem
showtime in

IPhysicalLay
er

clr

dsl modem
showtime out

dsl
modem
showtim
e

dsl modem
showtime out

IPhysicalLay
er

min T

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

voltage low limit voltage


exceeded
limit

Severity

Is Correlation
Allowed

IModule

Event
Type

Event Source
(IMO Name)

LowLimitExce N
eded

Short
Description

Correlate

Calix V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-35

exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-277

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

DragonWave Horizon Series V2 Traps Registry Parameters


Table 10-36 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
DragonWave Horizon Series V2 traps shown in Table 10-9.

Auto
Remove

Flapping

IPhysicalLay
er

cri

DragonWave
Link Down Trap Link Up Trap

IPhysicalLay
er

clr

SNTP Servers
Unreachable

SNTP Servers
Unreachable

SNTP Servers
Unreachable

IManagedEle F
ment

min T

SNTP Servers
Unreachable
Cleared

SNTP Servers
Unreachable
Cleared

SNTP Servers
Unreachable
Cleared

IManagedEle F
ment

clr

Dropped
Frames
Threshold
Exceeded

IPhysicalLay
er

min T

Dropped
Frames
Threshold
Exceeded
Cleared

IPhysicalLay
er

clr

IPhysicalLay
er

info T

IPhysicalLay
er

clr

DragonWave Link
Down

DragonWave
DragonWave
Link Down Trap Link Down
Trap

DragonWave Link Up DragonWave

Dropped Frames
Dropped
Threshold Exceeded Frames

Threshold
Exceeded
Dropped Frames
Dropped
Threshold Exceeded Frames
Cleared
Threshold

Exceeded
Cleared

Modem Rx LOS Lock Modem Rx LOS Modem Rx

Lock

LOS Lock

Modem Rx LOS Lock Modem Rx LOS Modem Rx


Cleared
Lock Cleared
LOS Lock

Is Ticketable

Auto Clear

min T

DragonWave
N
Cold Start Trap

Severity

Weight

DragonWave
Cold Start Trap

Activate
Flow

DragonWave Cold
Start

Event Source
(IMO Name)

Event Type

Expedites
Polling

Event
Subtype

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

DragonWave Horizon Series V2 Trap Registry Parameters

Correlate

Table 10-36

Cleared
Modem SNR Below
Threshold

Modem SNR
Below
Threshold

Modem SNR
Below
Threshold

IPhysicalLay
er

maj T

Modem SNR Below


Threshold Cleared

Modem SNR
Below
Threshold
Cleared

Modem SNR
Below
Threshold
Cleared

IPhysicalLay
er

clr

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-278

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj T

Modem Equalizer
Stress Exceed
Threshold Cleared

Modem
Equalizer Stress
Exceed
Threshold
Cleared

Modem
Equalizer
Stress Exceed
Threshold
Cleared

IPhysicalLay
er

clr

Channelized RSL
Below Threshold

Channelized
RSL Below
Threshold

Channelized
RSL Below
Threshold

IPhysicalLay
er

maj T

Channelized RSL
Below Threshold
Cleared

Channelized
RSL Below
Threshold
Cleared

Channelized
RSL Below
Threshold
Cleared

IPhysicalLay
er

clr

Modem Hardware
Fault

Modem
Hardware Fault

Modem
N
Hardware Fault

IPhysicalLay
er

info T

Modem Hardware
Fault Cleared

Modem
Hardware Fault
Cleared

Modem
N
Hardware Fault
Cleared

IPhysicalLay
er

clr

User Session
Commenced

User Session
Commenced

User Session
Commenced

IPhysicalLay
er

clr

User Session
Terminated

User Session
Terminated

User Session
Terminated

IPhysicalLay
er

info T

Partner Redundancy
Mode Mismatch

Partner
Partner
Redundancy
Redundancy
Mode Mismatch Mode
Mismatch

IPhysicalLay
er

maj T

Partner Redundancy
Mode Mismatch
Cleared

Partner
Redundancy
Mode Mismatch
Cleared

Partner
Redundancy
Mode
Mismatch
Cleared

IPhysicalLay
er

clr

Partner
Configuration
Mismatch

Partner
Configuration
Mismatch

Partner
Configuration
Mismatch

IPhysicalLay
er

maj T

Partner
Configuration
Mismatch Cleared

Partner
Configuration
Mismatch
Cleared

Partner
Configuration
Mismatch
Cleared

IPhysicalLay
er

clr

Is Ticketable

Weight

IPhysicalLay
er

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Modem
Equalizer
Stress Exceed
Threshold

Event Type

Expedites
Polling

Modem
Equalizer Stress
Exceed
Threshold

Event
Subtype

Modem Equalizer
Stress Exceed
Threshold

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-279

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj T

HSB Active On
Secondary Cleared

HSB Active On
Secondary
Cleared

HSB Active On N
Secondary
Cleared

IPhysicalLay
er

clr

HSB Override By
User

HSB Override
By User

HSB Override
By User

IPhysicalLay
er

maj T

HSB Override By
User Cleared

HSB Override
By User
Cleared

HSB Override
By User
Cleared

IPhysicalLay
er

clr

HSB Cross Link

HSB Cross Link HSB Cross


Link

IPhysicalLay
er

maj T

HSB Cross Link


Cleared

HSB Cross Link HSB Cross


Cleared
Link Cleared

IPhysicalLay
er

clr

HSB Active On
Primary

HSB Active On
Primary

HSB Active On N
Primary

IPhysicalLay
er

min T

HSB Active On
Primary Cleared

HSB Active On HSB Active On N


Primary Cleared Primary
Cleared

IPhysicalLay
er

clr

Ethernet Port1
Queue1 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue1
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue1
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue1 Dropped
Frames Threshold
Exceeded Cleared

Ethernet Port1
Queue1
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue1
Dropped
Frames
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue2 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue2
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue2
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IPhysicalLay
er

Event Source
(IMO Name)

HSB Active On N
Secondary

Expedites
Polling

HSB Active On
Secondary

Event Type

Event
Subtype

HSB Active On
Secondary

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-280

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

IEthernet

clr

Ethernet Port1
Queue3 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue3
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue3
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue3 Dropped
Frames Threshold
Exceeded Cleared

Ethernet Port1
Queue3
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue3
Dropped
Frames
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue4 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue4
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue4
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue4 Dropped
Frames Threshold
Exceeded Cleared

Ethernet Port1
Queue4
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue4
Dropped
Frames
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue5 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue5
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue5
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Ethernet Port1
Queue2
Dropped
Frames
Threshold
Exceeded
Cleared

Event Type

Expedites
Polling

Ethernet Port1
Queue2
Dropped
Frames
Threshold
Exceeded
Cleared

Event
Subtype

Ethernet Port1
Queue2 Dropped
Frames Threshold
Exceeded Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-281

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

IEthernet

clr

Ethernet Port1
Queue6 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue6
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue6
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue6 Dropped
Frames Threshold
Exceeded Cleared

Ethernet Port1
Queue6
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue6
Dropped
Frames
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue7 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue7
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue7
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue7 Dropped
Frames Threshold
Exceeded Cleared

Ethernet Port1
Queue7
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue7
Dropped
Frames
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue8 Dropped
Frames Threshold
Exceeded

Ethernet Port1
Queue8
Dropped
Frames
Threshold
Exceeded

Ethernet Port1
Queue8
Dropped
Frames
Threshold
Exceeded

IEthernet

maj T

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Ethernet Port1
Queue5
Dropped
Frames
Threshold
Exceeded
Cleared

Expedites
Polling

Ethernet Port1
Queue5
Dropped
Frames
Threshold
Exceeded
Cleared

Event Type

Event
Subtype

Ethernet Port1
Queue5 Dropped
Frames Threshold
Exceeded Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-282

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Ethernet Port1
Ethernet Port1
Queue1 Depth
Queue1 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue1 Depth
Threshold
Exceeded

Ethernet Port1
Queue1 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue1 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue2 Depth
Queue2 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue2 Depth
Threshold
Exceeded

Ethernet Port1
Queue2 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue2 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue3 Depth
Queue3 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue3 Depth
Threshold
Exceeded

Ethernet Port1
Queue3 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue3 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue4 Depth
Queue4 Depth
Threshold Exceeded Threshold

Ethernet Port1
Queue4 Depth
Threshold
Exceeded

IEthernet

maj T

Ethernet Port1
Queue1 Depth
Threshold Exceeded
Cleared

Ethernet Port1
Queue2 Depth
Threshold Exceeded
Cleared

Ethernet Port1
Queue3 Depth
Threshold Exceeded
Cleared

Exceeded

Severity

Is Correlation
Allowed

IEthernet

Event Source
(IMO Name)

Event Type

Expedites
Polling

Ethernet Port1
Queue8
Dropped
Frames
Threshold
Exceeded
Cleared

Ethernet Port1
Queue8 Dropped
Frames Threshold
Exceeded Cleared

Event
Subtype

Ethernet Port1
Queue8
Dropped
Frames
Threshold
Exceeded
Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-283

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Ethernet Port1
Ethernet Port1
Queue5 Depth
Queue5 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue5 Depth
Threshold
Exceeded

Ethernet Port1
Queue5 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue5 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue6 Depth
Queue6 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue6 Depth
Threshold
Exceeded

Ethernet Port1
Queue6 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue6 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue7 Depth
Queue7 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue7 Depth
Threshold
Exceeded

Ethernet Port1
Queue7 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue7 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Ethernet Port1
Queue8 Depth
Queue8 Depth
Threshold Exceeded Threshold

IEthernet

maj T

Exceeded

Ethernet Port1
Queue8 Depth
Threshold
Exceeded

Ethernet Port1
Queue8 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue8 Depth
Threshold
Exceeded
Cleared

IEthernet

clr

Ethernet Port1
Queue5 Depth
Threshold Exceeded
Cleared

Ethernet Port1
Queue6 Depth
Threshold Exceeded
Cleared

Ethernet Port1
Queue7 Depth
Threshold Exceeded
Cleared

Ethernet Port1
Queue8 Depth
Threshold Exceeded
Cleared

Severity

Is Correlation
Allowed

IEthernet

Event Source
(IMO Name)

Event Type

Expedites
Polling

Ethernet Port1
Queue4 Depth
Threshold
Exceeded
Cleared

Ethernet Port1
Queue4 Depth
Threshold Exceeded
Cleared

Event
Subtype

Ethernet Port1
Queue4 Depth
Threshold
Exceeded
Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-284

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min T

IManagedEle F
ment

clr

Mismatch
Cleared

HAAM
Configuration
Mismatch
Cleared

HAAM On Lower
Modulation

HAAM On
Lower
Modulation

HAAM On
Lower
Modulation

IManagedEle F
ment

maj T

HAAM On Lower
Modulation Cleared

HAAM On
Lower
Modulation
Cleared

HAAM On
Lower
Modulation
Cleared

IManagedEle F
ment

clr

HAAM Event

HAAM Event

HAAM Event

IManagedEle F
ment

maj T

HAAM Event Cleared HAAM Event

HAAM Event
Cleared

IManagedEle F
ment

clr

Cleared
ATPC Config
Mismatch

ATPC Config
Mismatch

ATPC Config
Mismatch

IManagedEle F
ment

min T

ATPC Config
Mismatch Cleared

ATPC Config
Mismatch
Cleared

ATPC Config
Mismatch
Cleared

IManagedEle F
ment

clr

DragonWave Link
Down

DragonWave
DragonWave
Link Down Trap Link Down
Trap

IPhysicalLay
er

cri

DragonWave
Link Down Trap Link Up Trap

IPhysicalLay
er

clr

ATPC Config
Mismatch

ATPC Config
Mismatch

ATPC Config
Mismatch

IManagedEle F
ment

min T

ATPC Config
Mismatch Cleared

ATPC Config
Mismatch
Cleared

ATPC Config
Mismatch
Cleared

IManagedEle F
ment

clr

SNTP Servers
Unreachable

SNTP Servers
Unreachable

SNTP Servers
Unreachable

IManagedEle F
ment

min T

SNTP Servers
Unreachable
Cleared

SNTP Servers
Unreachable
Cleared

SNTP Servers
Unreachable
Cleared

IManagedEle F
ment

clr

Mismatch
HAAM Configuration HAAM
Mismatch Cleared
Configuration

DragonWave Link Up DragonWave

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Event Type

HAAM Configuration HAAM


Mismatch
Configuration

Expedites
Polling
N

Event
Subtype
HAAM
Configuration
Mismatch

Short
Description

Is Correlation
Allowed

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-285

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

min T

Threshold
Exceeded
Dropped Frames
Dropped
Threshold Exceeded Frames
Cleared
Threshold

Dropped
Frames
Threshold
Exceeded
Cleared

IPhysicalLay
er

clr

Exceeded
Cleared
BW Utilization
BW Utilization
Threshold Exceeded Threshold

BW Utilization N
Threshold
Exceeded

IPhysicalLay
er

min T

Exceeded
BW Utilization
BW Utilization
Threshold Exceeded Threshold
Cleared
Exceeded

BW Utilization N
Threshold
Exceeded
Cleared

IPhysicalLay
er

clr

Cleared

IPhysicalLay
er

cri

IPhysicalLay
er

clr

Modem Rx LOS Lock Modem Rx LOS Modem Rx

Lock

LOS Lock

Modem Rx LOS Lock Modem Rx LOS Modem Rx


Cleared
Lock Cleared
LOS Lock

Is Ticketable

Is Correlation
Allowed

Severity

Correlate

IPhysicalLay
er

Event Source
(IMO Name)

Event Type

Dropped Frames
Dropped
Threshold Exceeded Frames

Expedites
Polling

Dropped
Frames
Threshold
Exceeded

Event
Subtype

Activate
Flow

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-36

Cleared
Modem SNR Below
Threshold

Modem SNR
Below
Threshold

Modem SNR
Below
Threshold

IPhysicalLay
er

maj T

Modem SNR Below


Threshold Cleared

Modem SNR
Below
Threshold
Cleared

Modem SNR
Below
Threshold
Cleared

IPhysicalLay
er

clr

Modem Equalizer
Stress Exceed
Threshold

Modem
Equalizer Stress
Exceed
Threshold

Modem
Equalizer
Stress Exceed
Threshold

IPhysicalLay
er

maj T

Modem Equalizer
Stress Exceed
Threshold Cleared

Modem
Equalizer Stress
Exceed
Threshold
Cleared

Modem
Equalizer
Stress Exceed
Threshold
Cleared

IPhysicalLay
er

clr

Channelized RSL
Below Threshold

Channelized
RSL Below
Threshold

Channelized
RSL Below
Threshold

IPhysicalLay
er

maj T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-286

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

IPhysicalLay
er

clr

User Session
Commenced

User Session
Commenced

User Session
Commenced

IPhysicalLay
er

clr

User Session
Terminated

User Session
Terminated

User Session
Terminated

IPhysicalLay
er

info T

Radio Synth Lost


Lock

Radio Synth
Lost Lock

Radio Synth
Lost Lock

IPhysicalLay
er

cri

Radio Synth Lost


Lock Cleared

Radio Synth
Lost Lock
Cleared

Radio Synth
Lost Lock
Cleared

IPhysicalLay
er

clr

Radio Lost
Communication

Radio Lost
Radio Lost
N
Communication Communicatio
n

IPhysicalLay
er

cri

Radio Lost
Communication
Cleared

Radio Lost
Radio Lost
N
Communication Communicatio
Cleared
n Cleared

IPhysicalLay
er

clr

Radio Mismatch

Radio
Mismatch

Radio
Mismatch

IPhysicalLay
er

maj T

Radio Mismatch
Cleared

Radio
Mismatch
Cleared

Radio
Mismatch
Cleared

IPhysicalLay
er

Cle
ar

Radio Power Amp

Radio Power
Amp

Radio Power
Amp

IPhysicalLay
er

cri

Radio Power Amp


Cleared

Radio Power
Amp Cleared

Radio Power
Amp Cleared

IPhysicalLay
er

clr

Radio Excessive Tx
Cable Loss

Radio
Excessive Tx
Cable Loss

Radio
Excessive Tx
Cable Loss

IPhysicalLay
er

cri

Radio Excessive Tx
Cable Loss Cleared

Radio
Excessive Tx
Cable Loss
Cleared

Radio
Excessive Tx
Cable Loss
Cleared

IPhysicalLay
er

clr

High Power
Radio Tx
Detector

IPhysicalLay
er

cri

High Power Radio Tx High Power


Detector
Radio Tx

Detector

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Channelized
RSL Below
Threshold
Cleared

Event Type

Expedites
Polling

Channelized
RSL Below
Threshold
Cleared

Event
Subtype

Channelized RSL
Below Threshold
Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-287

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Secondary Radio Is
Active

Secondary
Radio Is Active

Secondary
N
Radio Is Active

IPhysicalLay
er

cri

Secondary Radio Is
Active Cleared

Secondary
Radio Is Active
Cleared

Secondary
N
Radio Is Active
Cleared

IPhysicalLay
er

clr

Redundancy Serial
Number Mismatch

Redundancy
Serial Number
Mismatch

Redundancy
Serial Number
Mismatch

IPhysicalLay
er

min T

Redundancy Serial
Number Mismatch
Cleared

Redundancy
Serial Number
Mismatch
Cleared

Redundancy
Serial Number
Mismatch
Cleared

IPhysicalLay
er

clr

Secondary
Radio Not
Detected

IPhysicalLay
er

maj T

IPhysicalLay
er

clr

Detected
Cleared

Secondary
Radio Not
Detected
Cleared

Primary Radio Not


Detected

Primary Radio
Not Detected

Primary Radio
Not Detected

IPhysicalLay
er

maj T

Primary Radio Not


Detected Cleared

Primary Radio
Not Detected
Cleared

Primary Radio
Not Detected
Cleared

IPhysicalLay
er

clr

Primary Radio

Primary Radio

Primary Radio

IPhysicalLay
er

cri

Primary Radio
Cleared

Primary Radio
Cleared

Primary Radio
Cleared

IPhysicalLay
er

clr

Excessive Rx Cable
Loss

Excessive Rx
Cable Loss

Excessive Rx
Cable Loss

IPhysicalLay
er

maj T

Excessive Rx Cable
Loss Cleared

Excessive Rx
Cable Loss
Cleared

Excessive Rx
Cable Loss
Cleared

IPhysicalLay
er

clr

Redundancy
Secondary Port Is
Active

Redundancy
Secondary Port
Is Active

Redundancy
N
Secondary Port
Is Active

IPhysicalLay
er

maj T

Secondary Radio Not Secondary


Detected
Radio Not

Detected
Secondary Radio Not Secondary
Detected Cleared
Radio Not

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Event Type

High Power Radio Tx High Power


Detector Cleared
Radio Tx

Expedites
Polling

IPhysicalLay
er

Event
Subtype

Detector
Cleared

High Power
Radio Tx
Detector
Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-288

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Redundancy Primary Redundancy


Port Faulty
Primary Port

Redundancy
Primary Port
Faulty

IPhysicalLay
er

maj T

Faulty
Redundancy Primary Redundancy
Port Faulty Cleared
Primary Port

IPhysicalLay
er

clr

Severity

Is Correlation
Allowed

Redundancy
Secondary Port
Is Active
Cleared

Event Source
(IMO Name)
IPhysicalLay
er

Event Type

Expedites
Polling

N
Redundancy
Secondary Port
Is Active
Cleared

Event
Subtype

Correlate

Redundancy
Secondary Port Is
Active Cleared

Activate
Flow

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-36

Faulty Cleared

Redundancy
N
Primary Port
Faulty Cleared

Redundancy
Secondary Port
Faulty

Redundancy
Secondary Port
Faulty

Redundancy
N
Secondary Port
Faulty

IPhysicalLay
er

maj T

Redundancy
Secondary Port
Faulty Cleared

Redundancy
Secondary Port
Faulty Cleared

Redundancy
N
Secondary Port
Faulty Cleared

IPhysicalLay
er

clr

Fan Failed

Fan Failed

Fan Failed

IPhysicalLay
er

maj T

Fan Failed Cleared

Fan Failed
Cleared

Fan Failed
Cleared

IPhysicalLay
er

clr

Radio Unit Hw
Changed

Radio Unit Hw
Changed

Radio Unit Hw N
Changed

IPhysicalLay
er

clr

Radio Drain Current

Radio Drain
Current

Radio Drain
Current

IPhysicalLay
er

maj T

Radio Drain Current


Cleared

Radio Drain
Radio Drain
Current Cleared Current
Cleared

IPhysicalLay
er

clr

DragonWave Cold
Start

DragonWave
Cold Start Trap

DragonWave
N
Cold Start Trap

IManagedEle F
ment

info T

DragonWave Link
Down

DragonWave
Link Down

DragonWave
Link Down

IPhysicalLay
er

cri

DragonWave Link Up DragonWave

DragonWave
Link Up

IPhysicalLay
er

clr

Link Down
Radio Drain Current

Radio Drain
Current

Radio Drain
Current

IPhysicalLay
er

maj T

Radio Drain Current


Cleared

Radio Drain
Current

Radio Drain
Current
Cleared

IPhysicalLay
er

clr

Radio Power Amp

Radio Power
Amp

Radio Power
Amp

IPhysicalLay
er

cri

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-289

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Is Ticketable

Auto
Remove

Flapping

IPhysicalLay
er

clr

IPhysicalLay
er

cri

IPhysicalLay
er

clr

LOS Lock

Modem Rx LOS Lock Modem Rx LOS Modem Rx


Cleared
Lock
LOS Lock

Severity

Event Source
(IMO Name)

Auto Clear

Lock

Weight

Modem Rx LOS Lock Modem Rx LOS Modem Rx

Is Correlation
Allowed

Radio Power
Amp Cleared

Correlate

Radio Power
Amp

Expedites
Polling

Event Type

Activate
Flow

Radio Power Amp


Cleared

Event
Subtype

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-36

Cleared
Modem SNR Below
Threshold

Modem SNR
Below
Threshold

Modem SNR
Below
Threshold

IPhysicalLay
er

maj T

Modem SNR Below


Threshold Cleared

Modem SNR
Below
Threshold

Modem SNR
Below
Threshold
Cleared

IPhysicalLay
er

clr

Modem Equalizer
Stress Exceed
Threshold

Modem
Equalizer Stress
Exceed
Threshold

Modem
Equalizer
Stress Exceed
Threshold

IPhysicalLay
er

maj T

Modem Equalizer
Stress Exceed
Threshold Cleared

Modem
Equalizer Stress
Exceed
Threshold

Modem
Equalizer
Stress Exceed
Threshold
Cleared

IPhysicalLay
er

clr

Channelized RSL
Below Threshold

Channelized
RSL Below
Threshold

Channelized
RSL Below
Threshold

IPhysicalLay
er

maj T

Channelized RSL
Below Threshold
Cleared

Channelized
RSL Below
Threshold

Channelized
RSL Below
Threshold
Cleared

IPhysicalLay
er

clr

SNTP Servers
Unreachable

SNTP Servers
Unreachable

SNTP Servers
Unreachable

IPhysicalLay
er

min T

SNTP Servers
Unreachable
Cleared

SNTP Servers
Unreachable

SNTP Servers
Unreachable
Cleared

IPhysicalLay
er

clr

User Session
Commenced

User Session
Commenced

User Session
Commenced

IPhysicalLay
er

min T

User Session
Terminated

User Session
Commenced

User Session
Terminated

IPhysicalLay
er

info T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-290

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

min T

Mismatch
HAAM Configuration HAAM
Mismatch Cleared
Configuration

HAAM
Configuration
Mismatch
Cleared

IPhysicalLay
er

clr

Mismatch

Is Ticketable

Is Correlation
Allowed

Severity

Correlate

IPhysicalLay
er

Event Source
(IMO Name)

Event Type

HAAM Configuration HAAM


Mismatch
Configuration

Expedites
Polling

HAAM
Configuration
Mismatch

Event
Subtype

Activate
Flow

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-36

HAAM On Lower
Modulation

HAAM On
Lower
Modulation

HAAM On
Lower
Modulation

IPhysicalLay
er

maj T

HAAM On Lower
Modulation Cleared

HAAM On
Lower
Modulation

HAAM On
Lower
Modulation
Cleared

IPhysicalLay
er

clr

ATPC Config
Mismatch

ATPC Config
Mismatch

ATPC Config
Mismatch

IPhysicalLay
er

min T

ATPC Config
Mismatch Cleared

ATPC Config
Mismatch

ATPC Config
Mismatch
Cleared

IPhysicalLay
er

clr

BW Utilization N
Threshold
Exceeded

IPhysicalLay
er

min T

BW Utilization
BW Utilization
Threshold Exceeded Threshold
Cleared
Exceeded

BW Utilization N
Threshold
Exceeded
Cleared

IPhysicalLay
er

clr

Aggregate Dropped
Frames Threshold

Aggregate
Dropped
Frames
Threshold

Aggregate
Dropped
Frames
Threshold

IPhysicalLay
er

maj T

Aggregate Dropped
Frames Threshold
Cleared

Aggregate
Dropped
Frames
Threshold

Aggregate
Dropped
Frames
Threshold
Cleared

IPhysicalLay
er

clr

Ethernet Speed
Reduced

Ethernet Speed
Reduced

Ethernet Speed N
Reduced

IPhysicalLay
er

min T

Ethernet Speed
Reduced Cleared

Ethernet Speed
Reduced

Ethernet Speed N
Reduced
Cleared

IPhysicalLay
er

clr

BW Utilization
BW Utilization
Threshold Exceeded Threshold

Exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-291

Chapter 10

Traps

DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

IPhysicalLay
er

cri

Radio Temperature
Out Of Limit Cleared

Radio
Temperature
Out Of Limit

Radio
Temperature
Out Of Limit
Cleared

IPhysicalLay
er

clr

Ethernet Queue
Dropped Frames
Threshold

Ethernet Queue
Dropped
Frames
Threshold

Ethernet
Queue
Dropped
Frames
Threshold

IPhysicalLay
er

maj T

Ethernet Queue
Dropped Frames
Threshold Cleared

Ethernet Queue
Dropped
Frames
Threshold

Ethernet
Queue
Dropped
Frames
Threshold
Cleared

IPhysicalLay
er

clr

Redundancy Partner
Config Mismatch

Redundancy
Partner Config
Mismatch

Redundancy
Partner Config
Mismatch

IPhysicalLay
er

maj T

Redundancy Partner
Config Mismatch
Cleared

Redundancy
Partner Config
Mismatch

Redundancy
Partner Config
Mismatch
Cleared

IPhysicalLay
er

clr

Redundancy Active
On Secondary

Redundancy
Active On
Secondary

Redundancy
Active On
Secondary

IPhysicalLay
er

maj T

Redundancy Active
On Secondary
Cleared

Redundancy
Active On
Secondary

Redundancy
Active On
Secondary
Cleared

IPhysicalLay
er

clr

Redundancy
Operating In Forced
Switch

Redundancy
Operating In
Forced Switch

Redundancy
Operating In
Forced Switch

IPhysicalLay
er

min T

Redundancy
Operating In Forced
Switch Cleared

Redundancy
Operating In
Forced Switch

Redundancy
Operating In
Forced Switch
Cleared

IPhysicalLay
er

clr

Redundancy Enet
Cross Link

Redundancy
Redundancy
Enet Cross Link Enet Cross
Link

IEthernet

min T

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Radio
Temperature
Out Of Limit

Event Type

Expedites
Polling

Radio
Temperature
Out Of Limit

Event
Subtype

Radio Temperature
Out Of Limit

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-292

OL-24429-01

Chapter 10

Traps
DragonWave Horizon Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Redundancy Active
Using Partner
WirelessLink

Redundancy
Active Using
Partner
WirelessLink

Redundancy
Active Using
Partner
WirelessLink

IPhysicalLay
er

min T

Redundancy Active
Using Partner
WirelessLink
Cleared

Redundancy
Active Using
Partner
WirelessLink

Redundancy
Active Using
Partner
WirelessLink
Cleared

IPhysicalLay
er

clr

Redundancy Standby Redundancy


WirelessLink In Use Standby

Redundancy
Standby
WirelessLink In WirelessLink
In Use
Use

IPhysicalLay
er

min T

Redundancy Standby Redundancy


Redundancy
WirelessLink In Use Standby
Standby
Cleared
WirelessLink In WirelessLink

IPhysicalLay
er

clr

Redundancy
Standby On
Primary

IPhysicalLay
er

maj T

Redundancy
Standby On
Primary
Cleared

IPhysicalLay
er

clr

Severity

Is Correlation
Allowed

IEthernet

Event Source
(IMO Name)

Event Type

Expedites
Polling

Redundancy
Redundancy
Enet Cross Link Enet Cross
Link Cleared

Event
Subtype

Redundancy Enet
Cross Link Cleared

Short
Description

Correlate

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-36

In Use Cleared

Use
Redundancy Standby Redundancy
On Primary
Standby On

Primary
Redundancy Standby Redundancy
On Primary Cleared Standby On

Primary
X2 Delivering Half
Capacity

X2 Delivering
Half Capacity

X2 Delivering
Half Capacity

IPhysicalLay
er

maj T

X2 Delivering Half
Capacity Cleared

X2 Delivering
Half Capacity

X2 Delivering
Half Capacity
Cleared

IPhysicalLay
er

clr

BNC Cable Signal


Not Detected

BNC Cable
Signal Not
Detected

BNC Cable
Signal Not
Detected

IPhysicalLay
er

maj T

BNC Cable Signal


Not Detected
Cleared

BNC Cable
Signal Not
Detected

BNC Cable
Signal Not
Detected
Cleared

IPhysicalLay
er

clr

Queue Depth
Threshold

Queue Depth
Threshold

Queue Depth
Threshold

IPhysicalLay
er

maj T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-293

Chapter 10

Traps

Huawei S9300-Series V1 Traps Registry Parameters

Is Correlation
Allowed

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

HAAM
N
Modulation
Changed Event

IManagedEle F
ment

maj T

ATPC Auto
Disabled

ATPC Auto
Disabled

IPhysicalLay
er

maj T

ATPC Auto
Disabled

ATPC Auto
Disabled
Cleared

IPhysicalLay
er

clr

Queue Depth
Threshold

Queue Depth
Threshold
Cleared

HAAM Modulation
Changed Event

HAAM
Modulation
Changed Event

ATPC Auto Disabled


ATPC Auto Disabled
Cleared

Expedites
Polling
N

IPhysicalLay
er

Severity

Correlate
F

Event Type

Queue Depth
Threshold Cleared

Event Source
(IMO Name)

Event
Subtype

Activate
Flow

DragonWave Horizon Series V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-36

Huawei S9300-Series V1 Traps Registry Parameters


Table 10-37 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Huawei S9300-Series V1 traps shown in Table 10-10.

clr

huawei Warm
start trap

huawei
huawei warm
warm
start trap
start trap

IManagedEle F
ment

min T

Event
Subtype

Flapping

Auto
Remove

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

dummy ticket
trap

Event Source
(IMO Name)

dummy
ticket
trap

Event
Type

Expedites
Polling

dummy ticket
trap

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V1 Trap Registry Parameters

Correlate

Table 10-37

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-294

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

huawei SNMP
Link up

huawei
snmp
link
down

huawei snmp
link up

ip interface oper IManagedEle F


ment
status,
ce-efp-status-tel
net,
port-status,baset
ech-lldp-neighbo
rs-snmp,
basetech-cdp-nei
ghbors-snmp,
ce-vfi-status-teln
et,
mpls-te-frr-statetelnet

clr

huawei Cold
start trap

huawei
huawei cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

huawei BGP
down trap

huawei
bgp trap

huawei bgp
down trap

IManagedEle F
ment

maj F

huawei BGP
huawei
established trap bgp trap

huawei bgp
established
trap

IManagedEle F
ment

clr

IManagedEle F
ment

info F

huawei SNMP
authentication
failure

Event
Subtype

huawei snmp
huawei
authentication
snmp
authentic failure
ation
failure

Is Ticketable

Auto Clear

Severity

Weight

ip interface oper IManagedEle F


ment
status,
ce-efp-status-tel
net,
port-status,baset
ech-lldp-neighbo
rs-snmp,
basetech-cdp-nei
ghbors-snmp,
ce-vfi-status-teln
et,
mpls-te-frr-statetelnet

Activate
Flow

huawei snmp
link down

Event Source
(IMO Name)

huawei
snmp
link
down

Event
Type

Expedites
Polling

huawei SNMP
Link down

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-37

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-295

Chapter 10

Traps

Huawei S9300-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

huawei OSPF
interface state
changed to Up

huawei
ospf if
state
down

huawei ospf if
state up

IManagedEle F
ment

clr

huawei OSPF
neighbor state
down

huawei ospf
huawei
neighbor state
ospf
neighbor down
state
down

IManagedEle T
ment

maj F

huawei OSPF
neighbor state
up

huawei ospf
huawei
neighbor state
ospf
neighbor up
state
down

IManagedEle F
ment

clr

huawei OSPF
interface
configuration
error
huawei OSPF
interface
authentication
failure

huawei
huawei
ospf-if-c ospf-if-configonfig-err err

IManagedEle F
ment

wrn T

huawei
N
huawei
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IManagedEle F
ment

wrn T

huawei OSPF
bad packet
received

huawei
huawei
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

IManagedEle F
ment

min F

huawei OSPF
packet
retransmitted

huawei
N
huawei
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

IManagedEle F
ment

min F

huawei OSPF
new LSA
originated

huawei
N
huawei
ospf-new ospf-new-lsa-o
-lsa-origi riginated
nated

IManagedEle F
ment

min F

huawei OSPF
LSA aged to
MaxAge

huawei
N
huawei
ospf-lsa- ospf-lsa-reache
reached- d-maxage
maxage

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

huawei ospf if
state down

Event Source
(IMO Name)

huawei
ospf if
state
down

Event
Type

Expedites
Polling

huawei OSPF
interface state
changed to
Down

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-37

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-296

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V2 Traps Registry Parameters

Huawei S9300-Series V2 Traps Registry Parameters


Table 10-38 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Huawei S9300-Series V2 traps shown in Table 10-11.

Auto Clear

Auto
Remove

Flapping

maj F

huawei bgp
established
establish trap
ed trap

IManagedEle F
ment

clr

IManagedEle F
ment

info F

huawei BGP
huawei
established trap bgp

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IManagedEle F
ment

Activate
Flow

huawei
bgp
down
trap

Event Source
(IMO Name)

huawei bgp
down trap

Event
Type

Expedites
Polling

Correlate

huawei BGP
down trap

Huawei S9300-Series V2 Trap Registry Parameters

Event
Subtype

Short
Description

Table 10-38

huawei Entity
table
configuration
changed

huawei
Entity
table
configur
ation
changed

huawei Cold
start trap

huawei
huawei cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

huawei Warm
start trap

huawei
huawei warm
warm
start trap
start trap

IManagedEle F
ment

min T

huawei SNMP
authentication
failure

huawei snmp
huawei
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

huawei Entity
table
configuration
changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-297

Chapter 10

Traps

Huawei S9300-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

huawei SNMP
Link up

huawei
snmp
link up

huawei snmp
link up

ip interface oper IManagedEle F


ment
status,
ce-efp-status-tel
net,
port-status,baset
ech-lldp-neighbo
rs-snmp,
basetech-cdp-nei
ghbors-snmp,
ce-vfi-status-teln
et,
mpls-te-frr-statetelnet

clr

huawei OSPF
interface state
changed to
Down

huawei
ospf if
state
down

huawei ospf if
state down

IManagedEle F
ment

min F

huawei OSPF
interface state
changed to Up

huawei
ospf if
state up

huawei ospf if
state up

IManagedEle F
ment

clr

huawei OSPF
virtual interface
state changed to
Down

huawei
ospf
virtual if
state
down

huawei ospf
virtual if state
down

IManagedEle F
ment

min F

huawei OSPF
neighbor state
down

huawei ospf
huawei
neighbor state
ospf
neighbor down
state
down

IManagedEle T
ment

maj F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

ip interface oper IManagedEle F


status,ce-efp-stat ment
us-telnet,
port-status,
basetech-lldp-ne
ighbors-snmp,
basetech-cdp-nei
ghbors-snmp,
ce-vfi-status-teln
et,
mpls-te-frr-statetelnet

Activate
Flow

huawei snmp
link down

Event Source
(IMO Name)

huawei
snmp
link
down

Event
Type

Expedites
Polling

huawei SNMP
Link down

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-38

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-298

OL-24429-01

Chapter 10

Traps
Huawei S9300-Series V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

N
huawei
ospf-virtual-ne
ighbor-state-do
wn

IManagedEle T
ment

min T

huawei OSPF
virtual neighbor
state up

huawei
N
huawei
ospf-virt ospf-virtual-ne
ual-neig ighbor-state-up
hbor-stat
e-up

IManagedEle F
ment

clr

huawei OSPF
interface
configuration
error
huawei OSPF
virtual interface
configuration
error

huawei
huawei
ospf-if-c ospf-if-configonfig-err err

IManagedEle F
ment

wrn T

huawei
N
ospf-virtual-ifconfig-err

IManagedEle F
ment

min F

huawei OSPF
interface
authentication
failure

huawei
N
huawei
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IManagedEle F
ment

wrn T

huawei OSPF
virtual interface
authentication
failure

huawei
N
huawei
ospf-virt ospf-virtual-ifual-if-aut authentic-fail
hentic-fa
il

IManagedEle F
ment

wrn T

huawei OSPF
bad packet
received

huawei
huawei
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

IManagedEle F
ment

min F

huawei OSPF
bad packet
received on
virtual interface

huawei
ospf-virt
ual-if-ba
d-packet

huawei
N
ospf-virtual-ifbad-packet

IManagedEle F
ment

min F

Event
Subtype

huawei OSPF
virtual neighbor
state down

huawei
ospf-virt
ual-neig
hbor-stat
e-down

huawei
ospf-virt
ual-if-co
nfig-err

Severity

Weight

huawei ospf
huawei
neighbor state
ospf
neighbor up
state up

Activate
Flow

huawei OSPF
neighbor state
up

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-38

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-299

Chapter 10

Traps

Huawei S9300-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

huawei OSPF
packet
retransmitted on
virtual interface

huawei
ospf-virt
ual-if-pa
cket-retr
ansmit

N
huawei
ospf-virtual-ifpacket-retrans
mit

IManagedEle F
ment

min F

huawei OSPF
new LSA
originated

huawei
N
huawei
ospf-new ospf-new-lsa-o
-lsa-origi riginated
nated

IManagedEle F
ment

min F

huawei OSPF
LSA aged to
MaxAge

huawei
N
huawei
ospf-lsa- ospf-lsa-reache
reached- d-maxage
maxage

IManagedEle F
ment

info F

huawei mpls l3
vpn numvrf
routemax thresh
cleared Trap

huawei
mpls l3
vpn
numvrf
routemax
thresh
cleared

huawei mpls l3 N
vpn numvrf
routemax
thresh cleared

IManagedEle F
ment

clr

huawei mpls l3
vpn vrf Down
Trap

huawei
mpls l3
vpn vrf
Down

huawei mpls l3 N
vpn vrf Down

IManagedEle T
ment

maj T

huawei mpls l3
vpn vrf numvrf
routemax thresh
exceeded Trap

huawei
mpls l3
vpn vrf
numvrf
routemax
thresh
exceeded

huawei mpls l3 N
vpn vrf numvrf
routemax
thresh
exceeded

IManagedEle F
ment

wrn F

huawei mpls l3
vpn vrf routemid
thresh exceeded
Trap

huawei
mpls l3
vpn vrf
routemid
thresh
exceeded

huawei mpls l3 N
vpn vrf
routemid
thresh
exceeded

IManagedEle F
ment

wrn F

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

huawei
N
huawei
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

Event
Type

Event
Subtype

huawei OSPF
packet
retransmitted

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-38

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-300

OL-24429-01

Chapter 10

Traps
Huawei CX600/ATN Series V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

huawei
MPLS-TE tunnel
rerouted trap

huawei
mpls te
tunnel
rerouted
trap

huawei mpls te N
tunnel rerouted
trap

IManagedEle F
ment

info T

huawei mpls te N
tunnel
reoptimized
trap

IManagedEle F
ment

info F

huawei
huawei
MPLS-TE tunnel mpls te
reoptimized trap tunnel

reoptimi
zed trap

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

huawei mpls l3 N
vpn vrf Up

Expedites
Polling

huawei
mpls l3
vpn vrf
Up

Event
Type

Event
Subtype

huawei mpls l3
vpn vrf Up Trap

Short
Description

Is Correlation
Allowed

Huawei S9300-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-38

huawei
MPLS-TE tunnel
down

huawei
mpls te
tunnel
down

huawei mpls te Y
tunnel down

IManagedEle T
ment

8
0
0

maj T

huawei
MPLS-TE tunnel
up

huawei
huawei mpls te Y
mpls te
tunnel up
tunnel up

IManagedEle F
ment

clr

Huawei CX600/ATN Series V1 Traps Registry Parameters


Huawei CX600/ATN Series V1 traps registery parameters supported in Cisco ANA is the same as the
Huawei S9300-Series V1 traps registery parameters. For more details on the Huawei S9300-Series V1
traps registery parameters see Table 10-37.

Huawei CX600/ATN Series V2 Traps Registry Parameters


Huawei CX600/ATN Series V2 traps registery parameters supported in Cisco ANA is the same as the
Huawei S9300-Series V2 traps registery parameters. For more details on the Huawei S9300-Series V2
traps registery parameters see Table 10-38.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-301

Chapter 10

Traps

Juniper E-Series V1 Traps Registry Parameters

Juniper E-Series V1 Traps Registry Parameters


Table 10-39 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper M-Series V1 traps shown in Table 10-12.

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

Juniper BGP
down trap

juniper bgp
down trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

maj F

juniper
bgp trap

Expedites
Polling

Event
Subtype

Severity

Is Correlation
Allowed

juniper bgp
established
trap

Event
Type

Event Source
(IMO Name)

Juniper BGP
juniper
established trap bgp trap

Short
Description

Correlate

Juniper E-Series V1 Trap Registry Parameters

Activate
Flow

Table 10-39

Juniper E-Series V2 Traps Registry Parameters


Table 10-40 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper E-Series V2 traps shown in Table 10-13.

Auto
Remove

Flapping

info F

Juniper FR DLCI
status up trap

Juniper
fr dlci
status
change
trap

Juniper fr dlci
status up trap

IManagedEle F
ment

info F

Juniper OSPF
interface state
changed to
Down

Juniper
ospf if
state
down

Juniper ospf if
state down

IIPInterface

info F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle T
ment

Severity

Weight

Activate
Flow

Juniper fr dlci
status change
trap

Event Source
(IMO Name)

Juniper
fr dlci
status
change
trap

Event
Type

Expedites
Polling

Juniper FR DLCI
status change
trap

Short
Description

Is Correlation
Allowed

Juniper E-Series V2 Trap Registry Parameters

Correlate

Table 10-40

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-302

OL-24429-01

Chapter 10

Traps
Juniper E-Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

IIPInterface

clr

Juniper OSPF
virtual interface
state changed to
Down

Juniper
ospf
virtual if
state
down

Juniper ospf
virtual if state
down

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
neighbor state
down

Juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj T

Juniper OSPF
virtual neighbor
state down

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-down
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
interface
authentication
failure

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IProfileConta F
iner (OSPF)

wrn T

Event
Subtype

Severity

Is Correlation
Allowed

Juniper ospf if
state up

Event Source
(IMO Name)

Juniper
ospf if
state
down

Event
Type

Expedites
Polling

Juniper OSPF
interface state
changed to Up

Short
Description

Correlate

Juniper E-Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-40

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-303

Chapter 10

Traps

Juniper E-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IProfileConta F
iner (OSPF)

min F

Juniper new
root trap

Juniper
new root
trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

Juniper- Juniper-Spanni N
Spanning ng-Tree-Topol
-Tree-To ogy-Change
pology-C
hange-Tr
ap

IManagedEle F
ment

info F

Juniper Cold
start trap

Juniper
Juniper cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

Juniper OSPF
LSA aged to
MaxAge

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IProfileConta F
iner (OSPF)

min F

Event
Subtype
Juniper new
root trap

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IIPInterface

Event Source
(IMO Name)

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

Event
Type

Expedites
Polling

Juniper OSPF
bad packet
received

Short
Description

Correlate

Juniper E-Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-40

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-304

OL-24429-01

Chapter 10

Traps
Juniper E-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

Juniper Entity
table
configuration
changed

IManagedEle F
ment

info F

Juniper OSPF
lsdb
approaching
overflow trap

Juniper
ospf lsdb
approach
ing
overflow
trap

Juniper ospf
lsdb
approaching
overflow trap

IManagedEle F
ment

min F

Juniper OSPF
lsdb overflow
trap

Juniper ospf
Juniper
ospf lsdb lsdb overflow
overflow trap
trap

IManagedEle F
ment

min F

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper SNMP
Link down

Juniper
snmp
link
down

Juniper snmp
link down

ip interface oper IPhysicalLay


er
status,
ce-efp-status-tel
net, port-status,
basetech-lldp-ne
ighbors-snmp,
basetech-cdp-nei
ghbors-snmp

maj F

Juniper SNMP
Link up

Juniper
snmp
link
down

Juniper snmp
link up

ip interface oper IPhysicalLay


er
status,
ce-efp-status-tel
net, port-status,
basetech-lldp-ne
ighbors-snmp,
basetech-cdp-nei
ghbors-snmp

clr

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IProfileConta F
iner (OSPF)

Event Source
(IMO Name)

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

Event
Type

Expedites
Polling

Juniper OSPF
new LSA
originated

Short
Description

Is Correlation
Allowed

Juniper E-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-40

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-305

Chapter 10

Traps

Juniper M-Series V1 Traps Registry Parameters

Juniper M-Series V1 Traps Registry Parameters


Table 10-41 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper M-Series V1 traps shown in Table 10-14.

Auto
Remove

Flapping

info F

Juniper FR DLCI
status up trap

Juniper
fr dlci
status
change
trap

Juniper fr dlci
status up trap

IManagedEle F
ment

info F

Juniper OSPF
virtual interface
state changed to
Down

Juniper
ospf
virtual if
state
down

Juniper ospf
virtual if state
down

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
neighbor state
down

Juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj T

Juniper OSPF
neighbor state
up

Juniper ospf
Juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

Juniper
ospf-virt
ual-neig
hbor-stat
e-change
d

IOspfEntry

min T

Event
Subtype
N
Juniper
ospf-virtual-ne
ighbor-state-do
wn

Is Ticketable

Auto Clear

IManagedEle T
ment

Severity

Weight

Activate
Flow

Juniper fr dlci
status change
trap

Event Source
(IMO Name)

Juniper
fr dlci
status
change
trap

Event
Type

Expedites
Polling

Juniper FR DLCI
status change
trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters

Correlate

Table 10-41

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-306

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
interface
authentication
failure

Junipe-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IProfileConta F
iner (OSPF)

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IProfileConta F
iner (OSPF)

min F

Junipe-o
spf-virtu
al-if-con
fig-err

Junipe-ospf-vir N
tual-if-config-e
rr

Severity

Is Correlation
Allowed

Event Source
(IMO Name)
IOspfEntry

Expedites
Polling

Juniper
N
Juniper
ospf-virt ospf-virtual-ne
ual-neig ighbor-state-up
hbor-stat
e-change
d

Event
Type

Event
Subtype

Juniper OSPF
virtual neighbor
state up

Short
Description

Correlate

Juniper M-Series V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-41

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-307

Chapter 10

Traps

Juniper M-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

info F

Juniper OSPF
interface state
changed to
Down

Juniper-o Juniper-ospf if
state down
spf if
state
down

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

Juniper
ospf if
state
down

Juniper ospf if
state up

IIPInterface

clr

Juniper BGP
Juniper
established trap bgp trap

Juniper bgp
established
trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

Juniper BGP
down trap

Juniper
bgp trap

Juniper bgp
down trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

maj F

Juniper new
root trap

Juniper
new root
trap

Juniper new
root trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

Juniper- Juniper-Spanni N
Spanning ng-Tree-Topol
-Tree-To ogy-Change
pology-C
hange-Tr
ap

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

label switching
table,
mpls-ldp-peers

ILse

clr

label switching
table,
mpls-ldp-peers

ILse

maj F

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

Down

Expedites
Polling

Event
Subtype
Juniper Entity
table
configuration
changed

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

Event
Type

Event Source
(IMO Name)

Juniper OSPF
LSA aged to
MaxAge

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-41

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-308

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

juniper aps
event switch
over trap

juniper aps
juniper
aps event event switch
over
switch
over

IManagedEle F
ment

maj F

juniper aps
event mode
mismatch trap

juniper aps
juniper
aps event event mode
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event channel
mismatch trap

juniper aps
juniper
aps event event channel
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event psbf trap

juniper aps
juniper
aps event event psbf
switch
over

IManagedEle F
ment

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

juniper vpn if
up

IManagedEle F
ment

clr

Juniper VPN
Interface Down

juniper
vpn if
down

juniper vpn if
down

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper mpls
lsp path down

Event Source
(IMO Name)

juniper
mpls lsp
path
down

Event
Type

Expedites
Polling

juniper mpls lsp


path down trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-41

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-309

Chapter 10

Traps

Juniper M-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

physical
command

IModule

min T

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

juniper over
temperature
Trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

juniper
juniper
redundancy
fru
switch over Trap power

juniper
redundancy
switch over

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

juniper power
supply failure

Severity

Is Correlation
Allowed

juniper
fru
power
off

Event
Type

Event Source
(IMO Name)

juniper power
supply failure
Trap

Short
Description

Correlate

Juniper M-Series V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-41

off
Card Out trap

card out
trap

card out trap

physical
command

IModule

maj F

juniper fru
removal Trap

juniper
fru
power
off

juniper fru
removal

physical
command

IModule

maj F

Card In trap

card out
trap

card in trap

physical
command

IModule

clr

juniper fru
insertion Trap

juniper
fru
power
off

juniper fru
insertion

physical
command

IModule

clr

Card Down Trap juniper

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

fru
power
off
Card Up Trap

power
off

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-310

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

physical
command

IModule

maj F

juniper fru
online Trap

juniper
fru
power
off

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper Sp svc
set zone
entered

IManagedEle F
ment

maj T

juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

juniper fru
offline

Severity

Is Correlation
Allowed

juniper
fru
power
off

Event
Type

Event Source
(IMO Name)

juniper fru
offline Trap

Short
Description

Correlate

Juniper M-Series V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-41

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
set cpu
exceeded trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu
exceeded

IManagedEle F
ment

maj T

juniper Sp svc
set cpu ok trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu ok

IManagedEle F
ment

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-311

Chapter 10

Traps

Juniper M-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper dfc hard


pps under
threshold trap

juniper dfc
N
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem under
threshold trap

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem under
threshold trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
under
threshold

IManagedEle F
ment

maj F

juniper power
supply ok trap

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

juniper dfc
hard pps
threshold
exceeded

Activate
Flow

juniper
dfc soft
pps
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper dfc hard


pps threshold
exceeded trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-41

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-312

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Activate
Flow

IManagedEle F
ment

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Correlate

Juniper M-Series V1 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-41

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper ldp
session up trap

juniper ldp
juniper
session up
ldp
notificati
on

IManagedEle F
ment

clr

juniper ldp
session down
trap

juniper ldp
juniper
session down
ldp
notificati
on

IManagedEle F
ment

maj F

juniper Cm cfg
change trap

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

juniper Cm
rescue change
trap

juniper
Cm cfg
change

juniper Cm
rescue change

IManagedEle F
ment

info F

juniper sonet
alarm set trap

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper sonet
alarm cleared
trap

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

IManagedEle F
ment

maj F

juniper PMon
juniper
overload set trap PMon

juniper PMon
overload set

overload
set

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-313

Chapter 10

Traps

Juniper M-Series V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper coll
flow overload

IManagedEle F
ment

maj F

juniper coll
flow overload
cleared

IManagedEle F
ment

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper coll
memory
available

IManagedEle F
ment

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper coll
juniper
unavailable dest coll
trap
unavaila

Event
Subtype

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper
PMon
overload
set

Event Source
(IMO Name)

juniper PMon
overload
cleared

Event
Type

Expedites
Polling

Is Correlation
Allowed

juniper PMon
overload
cleared trap

Correlate

Juniper M-Series V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-41

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

juniper coll flow juniper


overload trap
coll

unavaila
ble dest
juniper coll flow juniper
overload
coll
cleared trap
unavaila

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest
juniper coll
memory
available trap

juniper
coll
unavaila
ble dest

juniper coll ftp


juniper
switch over trap coll

unavaila
ble dest
juniper ping rtt
threshold
exceeded trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-314

OL-24429-01

Chapter 10

Traps
Juniper M-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

Event
Subtype

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper ping rtt N


std dev
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper
ping rtt
threshold
exceeded

Expedites
Polling

juniper ping rtt


std dev
threshold
exceeded trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-41

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
egress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

juniper bgp M2 juniper


established trap bgp M2

establish
ed
juniper bgp M2
backward
transition trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-315

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

Juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

Juniper
line
down
trap

Juniper line up ip interface oper


trap
status

IIPInterface

clr

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

Event
Subtype
N

Is Ticketable

1
9
0
0
0
0

Severity

Auto Clear

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

Juniper
Juniper cold
cold start start trap
trap

Event
Type

Expedites
Polling

Juniper Cold
start trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-41

Juniper M-Series V2 Traps Registry Parameters


Table 10-42 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper M-Series V2 traps shown in Table 10-15.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-316

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

Juniper FR DLCI
status up trap

Juniper
fr dlci
status
change
trap

Juniper fr dlci
status up trap

IManagedEle F
ment

info F

Juniper OSPF
interface state
changed to
Down

Juniper
ospf
virtual if
state
down

juniper ospf
virtual if state
down

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

Juniper
ospf
virtual if
state
down

juniper ospf
virtual if state
down

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
neighbor state
down

juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj T

Juniper OSPF
neighbor state
up

juniper ospf
Juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-down
bor-state
-changed

IOspfEntry

min T

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle T
ment

Severity

Weight

Activate
Flow

Juniper fr dlci
status change
trap

Event Source
(IMO Name)

Juniper
fr dlci
status
change
trap

Event
Type

Expedites
Polling

Juniper FR DLCI
status change
trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters

Correlate

Table 10-42

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-317

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
interface
authentication
failure

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IProfileConta F
iner (OSPF)

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IProfileConta F
iner (OSPF)

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IProfileConta F
iner (OSPF)

min F

Severity

Is Correlation
Allowed

Event Source
(IMO Name)
IOspfEntry

Expedites
Polling

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

Event
Type

Event
Subtype

Juniper OSPF
virtual neighbor
state up

Short
Description

Correlate

Juniper M-Series V2 Traps Registry Parameters (Continued)

Activate
Flow

Table 10-42

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-318

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

info F

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Event
Type

Correlate

Juniper OSPF
LSA aged to
MaxAge

Juniper M-Series V2 Traps Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-42

Juniper BGP
Juniper
established trap bgp trap

Juniper bgp
established
trap

IBgpNeighbo F
urEntry

maj F

Juniper BGP
down trap

Juniper
bgp trap

Juniper bgp
down trap

IBgpNeighbo F
urEntry

clr

Juniper new
root trap

Juniper
new root
trap

Juniper new
root trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

Juniper- Juniper-Spanni N
Spanning ng-Tree-Topol
-Tree-To ogy-Change
pology-C
hange-Tr
ap

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

label switching
table,
mpls-ldp-peers

ILse

clr

label switching
table,
mpls-ldp-peers

ILse

maj F

label switching
table,
mpls-ldp-peers

ILse

maj F

Juniper Entity
table
configuration
changed

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

Down
juniper mpls lsp
path down trap

juniper
mpls lsp
path
down

juniper mpls
lsp path down

IManagedEle F
ment

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-319

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper aps
event mode
mismatch trap

juniper aps
juniper
aps event event mode
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event channel
mismatch trap

juniper aps
juniper
aps event event channel
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event psbf trap

juniper aps
juniper
aps event event psbf
switch
over

IManagedEle F
ment

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

juniper vpn if
up

IManagedEle F
ment

clr

Juniper VPN
Interface Down

juniper
vpn if
down

juniper vpn if
down

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

juniper power
supply failure
Trap

juniper
fru
power
off

juniper power
supply failure

physical
command

IModule

min T

juniper fru
offline Trap

juniper
fru
power
off

juniper fru
offline

physical
command

IModule

maj F

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper aps
juniper
aps event event switch
over
switch
over

Event
Type

Event Source
(IMO Name)

juniper aps
event switch
over trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters (Continued)

Correlate

Table 10-42

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-320

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

juniper over
temperature
Trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

juniper
juniper
redundancy
fru
switch over Trap power

juniper
redundancy
switch over

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Severity

Is Correlation
Allowed

juniper
fru
power
off

Event
Type

Event Source
(IMO Name)

juniper fru
online Trap

Short
Description

Correlate

Juniper M-Series V2 Traps Registry Parameters (Continued)

Activate
Flow

Table 10-42

off
juniper fru
removal Trap

juniper
fru
power
off

juniper fru
removal

physical
command

IModule

maj F

juniper fru
insertion Trap

juniper
fru
power
off

juniper fru
insertion

physical
command

IModule

clr

Card Down Trap juniper

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

fru
power
off
Card Up Trap

power
off

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-321

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj T

Is Ticketable

Severity

Auto Clear

IManagedEle F
ment

Activate
Flow

Weight

juniper Sp svc
set zone
entered

Event Source
(IMO Name)

Expedites
Polling

Is Correlation
Allowed

juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

Event
Subtype

Event
Type

Correlate

Juniper M-Series V2 Traps Registry Parameters (Continued)

Short
Description

Table 10-42

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
set cpu
exceeded trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu
exceeded

IManagedEle F
ment

maj T

juniper Sp svc
set cpu ok trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu ok

IManagedEle F
ment

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps under
threshold trap

juniper dfc
N
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc
hard pps
threshold
exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-322

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

IManagedEle F
ment

maj F

juniper dfc
hard mem
under
threshold

IManagedEle F
ment

maj F

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

IManagedEle F
ment

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Expedites
Polling

Event
Subtype

juniper dfc hard


mem threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
threshold
exceeded

juniper dfc hard


mem under
threshold trap

juniper
dfc soft
pps
threshold
exceeded

juniper power
supply ok trap

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Is Ticketable

Auto Clear

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

Severity

Weight

juniper dfc soft


mem under
threshold trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters (Continued)

Correlate

Table 10-42

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-323

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper ldp
session down
trap

juniper ldp
juniper
session down
ldp
notificati
on

IManagedEle F
ment

maj F

juniper Cm cfg
change trap

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

juniper Cm
rescue change
trap

juniper
Cm cfg
change

juniper Cm
rescue change

IManagedEle F
ment

info F

juniper sonet
alarm set trap

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper sonet
alarm cleared
trap

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

juniper PMon
overload set

IManagedEle F
ment

maj F

juniper PMon
overload
cleared

IManagedEle F
ment

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper PMon
juniper
overload set trap PMon

Event
Subtype

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

juniper ldp
juniper
session up
ldp
notificati
on

Event
Type

Expedites
Polling

juniper ldp
session up trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters (Continued)

Correlate

Table 10-42

overload
set
juniper PMon
overload
cleared trap

juniper
PMon
overload
set

juniper coll
juniper
unavailable dest coll
trap
unavaila

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-324

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper coll
flow overload
cleared

IManagedEle F
ment

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper coll
memory
available

IManagedEle F
ment

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt


threshold
exceeded trap

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping rtt N


std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Event
Type

juniper coll flow juniper


overload trap
coll

Expedites
Polling

juniper coll
flow overload

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters (Continued)

Correlate

Table 10-42

unavaila
ble dest
juniper coll flow juniper
overload
coll
cleared trap
unavaila

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest
juniper coll
memory
available trap

juniper
coll
unavaila
ble dest

juniper coll ftp


juniper
switch over trap coll

unavaila
ble dest

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-325

Chapter 10

Traps

Juniper M-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper ping
ingress
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2
backward
transition trap

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

Juniper Cold
start trap

Juniper
Juniper cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

ip interface oper
status

IIPInterface

maj F

juniper bgp M2 juniper


established trap bgp M2

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper ping
egress jitter
threshold
exceeded

Event Source
(IMO Name)

juniper
ping rtt
threshold
exceeded

Event
Type

Expedites
Polling

juniper ping
egress jitter
threshold
exceeded trap

Short
Description

Is Correlation
Allowed

Juniper M-Series V2 Traps Registry Parameters (Continued)

Correlate

Table 10-42

establish
ed

Juniper line
down trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-326

OL-24429-01

Chapter 10

Traps
Juniper M-Series V2 Traps Registry Parameters

Is Ticketable

Auto
Remove

Flapping

clr

IManagedEle F
ment

info F

IIPInterface

Severity

Auto Clear

Weight

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

Is Correlation
Allowed

Juniper SNMP
authentication
failure

Juniper line up ip interface oper


trap
status

Correlate

Juniper
line
down
trap

Activate
Flow

Juniper Line up
trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Juniper M-Series V2 Traps Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-42

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-327

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Juniper MX-Series V1 Traps Registry Parameters


Table 10-43 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper MX-Series V1 traps shown in Table 10-16.

Auto
Remove

Flapping

min F

Juniper OSPF
neighbor state
down

juniper ospf
juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

Juniper OSPF
neighbor state
up

juniper ospf
juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-changed
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IManagedEle F
ment

min F

Juniper OSPF
interface
authentication
failure

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper ospf
virtual if state
down

Event Source
(IMO Name)

juniper
ospf
virtual if
state
down

Event
Type

Expedites
Polling

Juniper OSPF
virtual interface
state changed to
Down

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters

Correlate

Table 10-43

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-328

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IManagedEle F
ment

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IIPInterface

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Juniper OSPF
interface state
changed to
Down

Juniper
ospf if
state
down

Juniper ospf if
state down

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

Juniper
ospf if
state
down

Juniper ospf if
state up

IIPInterface

clr

Juniper BGP
Juniper
established trap bgp trap

Juniper bgp
established
trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

Juniper BGP
down trap

Juniper bgp
down trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

maj F

Juniper
bgp trap

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

Event
Type

Event Source
(IMO Name)

Juniper OSPF
virtual interface
authentication
failure

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-329

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

JuniperSpanning
-Tree-To
pology-C
hange-Tr
ap

Juniper-Spanni N
ng-Tree-Topol
ogy-Change-Tr
ap

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

Juniper Entity
table
configuration
changed

IManagedEle F
ment

info F

label switching
table,
mpls-ldp-peers

ILse

clr

label switching
table,
mpls-ldp-peers

ILse

maj F

label switching
table,
mpls-ldp-peers

ILse

maj F

Expedites
Polling

Event
Subtype

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

Down

Is Ticketable

Auto Clear

Severity

Weight

Juniper new
root trap

Activate
Flow

Juniper
new root
trap

Event
Type

Event Source
(IMO Name)

Juniper new
root trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

juniper mpls lsp


path down trap

juniper
mpls lsp
path
down

juniper mpls
lsp path down

IManagedEle F
ment

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

juniper aps
event switch
over trap

juniper aps
juniper
aps event event switch
over
switch
over

IManagedEle F
ment

maj F

juniper aps
event mode
mismatch trap

juniper aps
juniper
aps event event mode
mismatch
switch
over

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-330

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper aps
event psbf trap

juniper aps
juniper
aps event event psbf
switch
over

IManagedEle F
ment

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

juniper vpn if
up

IManagedEle F
ment

clr

Juniper VPN
Interface Down

juniper
vpn if
down

juniper vpn if
down

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

juniper power
supply failure
Trap

juniper
fru
power
off

juniper power
supply failure

physical
command

IModule

min T

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

juniper over
temperature
Trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

juniper
juniper
redundancy
fru
switch over Trap power

juniper
redundancy
switch over

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper aps
juniper
aps event event channel
mismatch
switch
over

Event
Type

Event Source
(IMO Name)

juniper aps
event channel
mismatch trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

off

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-331

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

physical
command

IModule

maj F

Card In trap

card out
trap

card in trap

physical
command

IModule

clr

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

Card Down Trap juniper

fru
power
off
Card Up Trap

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

card out trap

Severity

Is Correlation
Allowed

card out
trap

Event
Type

Event Source
(IMO Name)

Card Out trap

Short
Description

Correlate

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-43

power
off
juniper fru
offline Trap

juniper
fru
power
off

juniper fru
offline

physical
command

IModule

maj F

juniper fru
online Trap

juniper
fru
power
off

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper Sp svc
set zone
entered

IManagedEle F
ment

maj T

juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
set cpu
exceeded trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu
exceeded

IManagedEle F
ment

maj T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-332

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps under
threshold trap

juniper dfc
N
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem under
threshold trap

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

Event
Subtype
juniper dfc
hard pps
threshold
exceeded

juniper dfc
hard mem
threshold
exceeded

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper Sp svc
set cpu ok

Event Source
(IMO Name)

juniper
Sp svc
set zone
entered

Event
Type

Expedites
Polling

juniper Sp svc
set cpu ok trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-333

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

maj F

juniper power
supply ok trap

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

IManagedEle F
ment

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Expedites
Polling

Event
Subtype

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Is Ticketable

Auto Clear

Severity

Weight

juniper dfc
hard mem
under
threshold

Activate
Flow

juniper
dfc soft
pps
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper dfc hard


mem under
threshold trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper ldp
session up trap

juniper ldp
juniper
session up
ldp
notificati
on

IManagedEle F
ment

clr

juniper ldp
session down
trap

juniper ldp
juniper
session down
ldp
notificati
on

IManagedEle F
ment

maj F

juniper Cm cfg
change trap

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-334

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

info F

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

juniper PMon
overload set

IManagedEle F
ment

maj F

juniper PMon
overload
cleared

IManagedEle F
ment

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper coll
flow overload

IManagedEle F
ment

maj F

juniper coll
flow overload
cleared

IManagedEle F
ment

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper sonet
alarm set trap
juniper sonet
alarm cleared
trap

juniper PMon
juniper
overload set trap PMon

Is Ticketable

Weight

juniper Cm
rescue change

Severity

Is Correlation
Allowed

juniper
Cm cfg
change

Activate
Flow

IManagedEle F
ment

juniper Cm
rescue change
trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Correlate

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-43

overload
set
juniper PMon
overload
cleared trap

juniper
PMon
overload
set

juniper coll
juniper
unavailable dest coll
trap
unavaila

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

juniper coll flow juniper


overload trap
coll

unavaila
ble dest
juniper coll flow juniper
overload
coll
cleared trap
unavaila

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-335

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt


threshold
exceeded trap

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping rtt N


std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

juniper coll ftp


juniper
switch over trap coll

Event
Subtype
juniper coll
memory
available

Severity

Weight

juniper
coll
unavaila
ble dest

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

juniper coll
memory
available trap

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

unavaila
ble dest

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
egress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-336

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2
backward
transition trap

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

Juniper Cold
start trap

Juniper
Juniper cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

Juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

Juniper
line
down
trap

Juniper line up ip interface oper


trap
status

IIPInterface

clr

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

juniper isis
database
overload trap

Juniperis Juniperisisdata
isdatabas baseoverload
eoverloa
d

IManagedEle F
ment

min T

juniper isis
manual address
drops trap

Juniperis JuniperisisMan
isManual ualAddressDro
Address ps
Drops

IManagedEle F
ment

min T

juniper bgp M2 juniper


established trap bgp M2

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

juniper ping
ingress jitter
threshold
exceeded

Activate
Flow

juniper
ping rtt
threshold
exceeded

Event Source
(IMO Name)

IManagedEle F
ment

juniper ping
ingress jitter
threshold
exceeded trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

establish
ed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-337

Chapter 10

Traps

Juniper MX-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

min T

juniper isis
attempt to
exceed
maxsequence
trap

Juniperis JuniperisisAtte
isAttemp mptToExceed
tToExcee MaxSequence
dMaxSe
quence

IManagedEle F
ment

min T

juniper isis ID
Len mismatch
trap

Juniperis JuniperisisIDL
isIDLen enMismatch
Mismatc
h

IManagedEle F
ment

min T

juniper isis max


area addresses
mismatch trap

Juniperis JuniperisisMax
isMaxAr AreaAddresses
eaAddres Mismatch
sesMism
atch

IManagedEle F
ment

min T

IManagedEle F
ment

min T

IManagedEle F
ment

min T

juniper isis own Juniperis JuniperisisOw


lsp purge trap
isOwnLS nLSPPurge

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Juniperis JuniperisisCorr
isCorrup uptedLSPDete
tedLSPD cted
etected

Event
Type

Event
Subtype

juniper isis
corrupted lsp
detected trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

PPurge
juniper isis
Juniperis JuniperisisSeq
sequence
isSequen uenceNumberS
number skip trap ceNumb kip

erSkip
juniper isis
authentication
type failure

Juniperis JuniperisisAut
isAuthen henticationTyp
ticationT eFailure
ypeFailu
re

IManagedEle F
ment

min T

juniper isis
authenticationF
ailure

Juniperis JuniperisisAut
isAuthen henticationFail
ticationF ure
ailure

IManagedEle F
ment

min T

juniper isis
version skew

Juniperis JuniperisisVers
isVersion ionSkew
Skew

IManagedEle F
ment

min T

IManagedEle F
ment

min T

juniper isis area Juniperis JuniperisisAre


mismatch
isAreaMi aMismatch

smatch

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-338

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min T

juniper isis lsp


too large

Juniperis JuniperisisLSP
isLSPTo TooLargeToPr
oLargeT opagate
oPropaga
te

IManagedEle F
ment

min T

juniper isis orig


lsp buffer size
mismatch

JuniperJ
uniperisi
sOrigLS
PBuffSiz
eMismat
ch

JuniperJuniper
isisOrigLSPBu
ffSizeMismatc
h

IManagedEle F
ment

min T

juniper isis
protocols
supported
mismatch

Juniperis JuniperisisProt
isProtoc ocolsSupporte
olsSuppo dMismatch
rtedMis
match

IManagedEle F
ment

min T

juniper isis
adjacency
change

Juniperis JuniperisisAdj
isAdjace acencyChange
ncyChan
ge

IManagedEle F
ment

min T

juniper isis lsp


error detected

Juniperis JuniperisisLSP
isLSPErr ErrorDetected
orDetect
ed

IManagedEle F
ment

min T

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Juniperis JuniperisisReje
isRejecte ctedAdjacency
dAdjace
ncy

Event
Type

Event
Subtype

juniper isis
rejected
adjacency

Short
Description

Is Correlation
Allowed

Juniper MX-Series V1 Trap Registry Parameters (Continued)

Correlate

Table 10-43

Juniper MX-Series V2 Traps Registry Parameters


Table 10-44 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper MX-Series V2 traps shown in Table 10-17.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-339

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

Juniper
ospf if
state
down

Juniper ospf if
state up

IIPInterface

clr

Juniper OSPF
virtual interface
state changed to
Down

juniper
ospf
virtual if
state
down

juniper ospf
virtual if state
down

IManagedEle F
ment

min F

Juniper OSPF
neighbor state
down

juniper ospf
juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

Juniper OSPF
neighbor state
up

juniper ospf
juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
interface
configuration
error

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-changed
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual interface
configuration
error

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IManagedEle F
ment

min F

Event
Subtype

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Juniper ospf if
state down

Event Source
(IMO Name)

Juniper
ospf if
state
down

Event
Type

Expedites
Polling

Juniper OSPF
interface state
changed to
Down

Short
Description

Correlate

Juniper MX-Series V2 Trap Registry Parameters

Activate
Flow

Table 10-44

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-340

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IManagedEle F
ment

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IManagedEle F
ment

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IIPInterface

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IIPInterface

Event Source
(IMO Name)

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

Event
Type

Expedites
Polling

Juniper OSPF
interface
authentication
failure

Short
Description

Correlate

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-44

Juniper BGP
Juniper
established trap bgp trap

Juniper bgp
established
trap

IBgpNeighbo F
urEntry

maj F

Juniper BGP
down trap

Juniper
bgp trap

Juniper bgp
down trap

IBgpNeighbo F
urEntry

clr

Juniper new
root trap

Juniper
new root
trap

Juniper new
root trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-341

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

Juniper Entity
table
configuration
changed

IManagedEle F
ment

info F

label switching
table,
mpls-ldp-peers

ILse

clr

label switching
table,
mpls-ldp-peers

ILse

maj F

label switching
table,
mpls-ldp-peers

ILse

maj F

Expedites
Polling

Event
Subtype

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

Down

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Juniper-Spanni N
ng-Tree-Topol
ogy-Change-Tr
ap

Activate
Flow

JuniperSpanning
-Tree-To
pology-C
hange-Tr
ap

Event
Type

Event Source
(IMO Name)

Juniper
Spanning Tree
Topology
Changed

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

juniper mpls lsp


path down trap

juniper
mpls lsp
path
down

juniper mpls
lsp path down

IManagedEle F
ment

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

juniper aps
event switch
over trap

juniper aps
juniper
aps event event switch
over
switch
over

IManagedEle F
ment

maj F

juniper aps
event mode
mismatch trap

juniper aps
juniper
aps event event mode
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event channel
mismatch trap

juniper aps
juniper
aps event event channel
mismatch
switch
over

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-342

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

juniper vpn if
up

IManagedEle F
ment

clr

Juniper VPN
Interface Down

juniper
vpn if
down

juniper vpn if
down

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

juniper power
supply failure
Trap

juniper
fru
power
off

juniper power
supply failure

physical
command

IModule

min T

juniper fru
offline Trap

juniper
fru
power
off

juniper fru
offline

physical
command

IModule

maj F

juniper fru
online Trap

juniper
fru
power
off

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper aps
juniper
aps event event psbf
switch
over

Event
Type

Event Source
(IMO Name)

juniper aps
event psbf trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-343

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

IModule

info T

juniper
juniper
redundancy
fru
switch over Trap power

juniper
redundancy
switch over

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

physical
command

Severity

Is Correlation
Allowed

juniper over
temperature

juniper over
temperature
Trap

Event
Type

Event Source
(IMO Name)

juniper
fru
power
off

Short
Description

Correlate

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-44

off
Card Out trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

Card In trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

juniper Sp svc
set zone
entered

IManagedEle F
ment

maj T

Card Down Trap juniper

fru
power
off
Card Up Trap

power
off
juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
set cpu
exceeded trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu
exceeded

IManagedEle F
ment

maj T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-344

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps under
threshold trap

juniper dfc
N
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem under
threshold trap

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

Event
Subtype
juniper dfc
hard pps
threshold
exceeded

juniper dfc
hard mem
threshold
exceeded

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper Sp svc
set cpu ok

Event Source
(IMO Name)

juniper
Sp svc
set zone
entered

Event
Type

Expedites
Polling

juniper Sp svc
set cpu ok trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-345

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

maj F

juniper power
supply ok trap

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

IManagedEle F
ment

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Expedites
Polling

Event
Subtype

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Is Ticketable

Auto Clear

Severity

Weight

juniper dfc
hard mem
under
threshold

Activate
Flow

juniper
dfc soft
pps
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper dfc hard


mem under
threshold trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper ldp
session up trap

juniper ldp
juniper
session up
ldp
notificati
on

IManagedEle F
ment

clr

juniper ldp
session down
trap

juniper ldp
juniper
session down
ldp
notificati
on

IManagedEle F
ment

maj F

juniper Cm cfg
change trap

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-346

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

info F

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

juniper PMon
overload set

IManagedEle F
ment

maj F

juniper PMon
overload
cleared

IManagedEle F
ment

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper coll
flow overload

IManagedEle F
ment

maj F

juniper coll
flow overload
cleared

IManagedEle F
ment

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper sonet
alarm set trap
juniper sonet
alarm cleared
trap

juniper PMon
juniper
overload set trap PMon

Is Ticketable

Weight

juniper Cm
rescue change

Severity

Is Correlation
Allowed

juniper
Cm cfg
change

Activate
Flow

IManagedEle F
ment

juniper Cm
rescue change
trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Correlate

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-44

overload
set
juniper PMon
overload
cleared trap

juniper
PMon
overload
set

juniper coll
juniper
unavailable dest coll
trap
unavaila

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

juniper coll flow juniper


overload trap
coll

unavaila
ble dest
juniper coll flow juniper
overload
coll
cleared trap
unavaila

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-347

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt


threshold
exceeded trap

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping rtt N


std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

juniper coll ftp


juniper
switch over trap coll

Event
Subtype
juniper coll
memory
available

Severity

Weight

juniper
coll
unavaila
ble dest

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

juniper coll
memory
available trap

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

unavaila
ble dest

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
egress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-348

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2
backward
transition trap

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

Juniper Cold
start trap

Juniper
Juniper cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

Juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

Juniper
line
down
trap

Juniper line up ip interface oper


trap
status

IIPInterface

clr

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

juniper isis
database
overload trap

Juniperis Juniperisisdata
isdatabas baseoverload
eoverloa
d

IManagedEle F
ment

min T
or

juniper isis
manual address
drops trap

Juniperis JuniperisisMan
isManual ualAddressDro
Address ps
Drops

IManagedEle F
ment

min T
or

juniper bgp M2 juniper


established trap bgp M2

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

juniper ping
ingress jitter
threshold
exceeded

Activate
Flow

juniper
ping rtt
threshold
exceeded

Event Source
(IMO Name)

IManagedEle F
ment

juniper ping
ingress jitter
threshold
exceeded trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

establish
ed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-349

Chapter 10

Traps

Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min T
or

juniper isis
attempt to
exceed
maxsequence
trap

Juniperis JuniperisisAtte
isAttemp mptToExceed
tToExcee MaxSequence
dMaxSe
quence

IManagedEle F
ment

min T
or

juniper isis ID
Len mismatch
trap

Juniperis JuniperisisIDL
isIDLen enMismatch
Mismatc
h

IManagedEle F
ment

min T
or

juniper isis max


area addresses
mismatch trap

Juniperis JuniperisisMax
isMaxAr AreaAddresses
eaAddres Mismatch
sesMism
atch

IManagedEle F
ment

min T
or

IManagedEle F
ment

min T
or

IManagedEle F
ment

min T
or

juniper isis own Juniperis JuniperisisOw


lsp purge trap
isOwnLS nLSPPurge

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Juniperis JuniperisisCorr
isCorrup uptedLSPDete
tedLSPD cted
etected

Event
Type

Event
Subtype

juniper isis
corrupted lsp
detected trap

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

PPurge
juniper isis
Juniperis JuniperisisSeq
sequence
isSequen uenceNumberS
number skip trap ceNumb kip

erSkip
juniper isis
authentication
type failure

Juniperis JuniperisisAut
isAuthen henticationTyp
ticationT eFailure
ypeFailu
re

IManagedEle F
ment

min T
or

juniper isis
authenticationF
ailure

Juniperis JuniperisisAut
isAuthen henticationFail
ticationF ure
ailure

IManagedEle F
ment

min T
or

juniper isis
version skew

Juniperis JuniperisisVers
isVersion ionSkew
Skew

IManagedEle F
ment

min T
or

IManagedEle F
ment

min T
or

juniper isis area Juniperis JuniperisisAre


mismatch
isAreaMi aMismatch

smatch

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-350

OL-24429-01

Chapter 10

Traps
Juniper MX-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min T
or

juniper isis lsp


too large

Juniperis JuniperisisLSP
isLSPTo TooLargeToPr
oLargeT opagate
oPropaga
te

IManagedEle F
ment

min T
or

juniper isis orig


lsp buffer size
mismatch

JuniperJ
uniperisi
sOrigLS
PBuffSiz
eMismat
ch

JuniperJuniper
isisOrigLSPBu
ffSizeMismatc
h

IManagedEle F
ment

min T
or

juniper isis
protocols
supported
mismatch

Juniperis JuniperisisProt
isProtoc ocolsSupporte
olsSuppo dMismatch
rtedMis
match

IManagedEle F
ment

min T
or

juniper isis
adjacency
change

Juniperis JuniperisisAdj
isAdjace acencyChange
ncyChan
ge

IManagedEle F
ment

min T
or

juniper isis lsp


error detected

Juniperis JuniperisisLSP
isLSPErr ErrorDetected
orDetect
ed

IManagedEle F
ment

min T
or

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Juniperis JuniperisisReje
isRejecte ctedAdjacency
dAdjace
ncy

Event
Type

Event
Subtype

juniper isis
rejected
adjacency

Short
Description

Is Correlation
Allowed

Juniper MX-Series V2 Trap Registry Parameters (Continued)

Correlate

Table 10-44

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-351

Chapter 10

Traps

Juniper Netscreen V1 Traps Registry Parameters

Juniper Netscreen V1 Traps Registry Parameters


Table 10-45 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper Netscreen V1 traps shown in Table 10-18.

Auto
Remove

Flapping

min T

devicedead

hardware hardware-trap
-trap

IManagedEle F
ment

min T

genericHWfail

hardware hardware-trap
-trap

IManagedEle F
ment

min T

cpuhigh

hardware hardware-trap
-trap

IManagedEle F
ment

min T

lowmemory

hardware hardware-trap
-trap

IManagedEle F
ment

min T

highavialability

firewall-t firewall-trap
rap

IManagedEle F
ment

min T

dstipsessionlimi firewall-t firewall-trap


t
rap

IManagedEle F
ment

min T

nsrp-trap nsrp-vsd-maste N
r

IManagedEle F
ment

min T

nsrp vsd backup nsrp-trap nsrp-vsd-backu N

IManagedEle F
ment

min T

nsrp vsd master

Event
Subtype
p

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

hardware hardware-trap
-trap

Expedites
Polling

logfull

Short
Description

Is Correlation
Allowed

Juniper Netscreen V1 Trap Registry Parameters

Correlate

Table 10-45

nsrp rto up

nsrp-trap nsrp-rto-up

IManagedEle F
ment

min T

nsrp rto down

nsrp-trap nsrp-rto-down

IManagedEle F
ment

min T

Juniper OSPF
virtual interface
state changed to
Down

juniper
ospf
virtual if
state
down

juniper ospf
virtual if state
down

IManagedEle F
ment

min F

Juniper OSPF
neighbor state
down

juniper ospf
juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-352

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V1 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper
N
ospf-virtual-ne
ighbor-state-do
wn

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

juniper
N
juniper
ospf-virt ospf-virtual-ne
ual-neig ighbor-state-up
hbor-stat
e-change
d

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

juniper
juniper
ospf-if-c ospf-if-configonfig-err err

IIPInterface

wrn T

IManagedEle F
ment

min F

Juniper OSPF
interface
authentication
failure

juniper
N
juniper
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

juniper
N
juniper
ospf-virt ospf-virtual-ifual-if-aut authentic-fail
hentic-fa
il

IManagedEle F
ment

wrn T

Juniper OSPF
bad packet
received

juniper
juniper
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

juniper
ospf-virt
ual-if-ba
d-packet

IManagedEle F
ment

min F

Event
Subtype

juniper ospf
juniper
neighbor state
ospf
neighbor up
state
down

Juniper OSPF
virtual neighbor
state down

juniper
ospf-virt
ual-neig
hbor-stat
e-change
d

juniper
ospf-virt
ual-if-co
nfig-err

juniper
N
ospf-virtual-ifconfig-err

juniper
N
ospf-virtual-ifbad-packet

Severity

Is Correlation
Allowed

Juniper OSPF
neighbor state
up

Event Source
(IMO Name)

Event
Type

Expedites
Polling

IIPInterface

Short
Description

Correlate

Juniper Netscreen V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-45

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-353

Chapter 10

Traps

Juniper Netscreen V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min F

N
juniper
ospf-virtual-ifpacket-retrans
mit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

juniper
N
juniper
ospf-new ospf-new-lsa-o
-lsa-origi riginated
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

juniper
N
juniper
ospf-lsa- ospf-lsa-reache
reached- d-maxage
maxage

IManagedEle F
ment

info F

Juniper OSPF
interface state
changed to
Down

juniper
ospf if
state
down

juniper ospf if
state down

IIPInterface

info F

JuniperOSPF
interface state
changed to Up

juniper
ospf if
state
down

juniper ospf if
state up

IIPInterface

clr

Juniper BGP
juniper
established trap bgp trap

juniper bgp
established
trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

Juniper BGP
down trap

juniper
bgp trap

juniper bgp
down trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

maj F

Juniper new
root trap

juniper
new root
trap

juniper new
root trap

IManagedEle F
ment

info F

Expedites
Polling

Event
Subtype

juniper
N
juniper
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

Juniper OSPF
packet
retransmitted on
virtual interface

juniper
ospf-virt
ual-if-pa
cket-retr
ansmit

IIPInterface

Is Ticketable

Weight

Juniper OSPF
packet
retransmitted

Severity

Is Correlation
Allowed

Event
Type

Event Source
(IMO Name)

Short
Description

Correlate

Juniper Netscreen V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-45

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-354

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V1 Traps Registry Parameters

Auto
Remove

Flapping

info F

Juniper Entity
table
configuration
changed

juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

Event
Subtype
juniper Entity
table
configuration
changed

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

juniper-S juniper-Spanni N
panning- ng-Tree-Topol
Tree-Top ogy-Change
ology-Ch
ange-Tra
p

Event
Type

Expedites
Polling

Juniper
Spanning Tree
Topology
Changed

Short
Description

Is Correlation
Allowed

Juniper Netscreen V1 Trap Registry Parameters (Continued)

Correlate

Table 10-45

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-355

Chapter 10

Traps

Juniper Netscreen V2 Traps Registry Parameters

Juniper Netscreen V2 Traps Registry Parameters


Table 10-46 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper Netscreen V2 traps shown in Table 10-19.

Auto
Remove

Flapping

min T

devicedead

hardware hardware-trap
-trap

IManagedEle F
ment

min T

genericHWfail

hardware hardware-trap
-trap

IManagedEle F
ment

min T

cpuhigh

hardware hardware-trap
-trap

IManagedEle F
ment

min T

lowmemory

hardware hardware-trap
-trap

IManagedEle F
ment

min T

highavialability

firewall-t firewall-trap
rap

IManagedEle F
ment

min T

dstipsessionlimi firewall-t firewall-trap


t
rap

IManagedEle F
ment

min T

nsrp-trap nsrp-vsd-maste N
r

IManagedEle F
ment

min T

nsrp vsd backup nsrp-trap nsrp-vsd-backu N

IManagedEle F
ment

min T

nsrp vsd master

Event
Subtype
p

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

hardware hardware-trap
-trap

Expedites
Polling

logfull

Short
Description

Is Correlation
Allowed

Juniper Netscreen V2 Trap Registry Parameters

Correlate

Table 10-46

nsrp rto up

nsrp-trap nsrp-rto-up

IManagedEle F
ment

min T

nsrp rto down

nsrp-trap nsrp-rto-down

IManagedEle F
ment

min T

Juniper OSPF
interface state
changed to
Down

juniper
ospf if
state
down

juniper ospf if
state down

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

juniper
ospf if
state
down

juniper ospf if
state up

IIPInterface

clr

Juniper OSPF
virtual interface
state changed to
Down

juniper
ospf
virtual if
state
down

juniper ospf
virtual if state
down

IManagedEle F
ment

min F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-356

OL-24429-01

Chapter 10

Traps
Juniper Netscreen V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj F

Juniper OSPF
neighbor state
up

juniper ospf
juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-down
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

juniper-o juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

juniper-o juniper-ospf-if
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

juniper-o juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IManagedEle F
ment

min F

Juniper OSPF
interface
authentication
failure

juniper-o juniper-ospf-if
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

juniper-o juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IManagedEle F
ment

wrn T

Juniper OSPF
bad packet
received

juniper-o juniper-ospf-if
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Event
Subtype
N

Is Ticketable

Weight

IIPInterface

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

juniper ospf
juniper
neighbor state
ospf
neighbor down
state
down

Event
Type

Expedites
Polling

Juniper OSPF
neighbor state
down

Short
Description

Correlate

Juniper Netscreen V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-46

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-357

Chapter 10

Traps

Juniper Netscreen V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Juniper OSPF
packet
retransmitted

juniper-o juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IIPInterface

min F

Juniper OSPF
packet
retransmitted on
virtual interface

juniper-o juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

juniper-o juniper-ospf-ne N
spf-new- w-lsa-originate
lsa-origi d
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

juniper-o juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Juniper BGP
down trap

juniper
bgp trap

juniper bgp
down trap

IBgpNeighbo F
urEntry

maj F

Juniper BGP
juniper
established trap bgp trap

juniper bgp
established
trap

IBgpNeighbo F
urEntry

clr

Juniper new
root trap

juniper
new root
trap

juniper new
root trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

juniper-S juniper-Spanni N
panning- ng-Tree-Topol
Tree-Top ogy-Change
ology-Ch
ange-Tra
p

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

Event
Subtype
juniper Entity
table
configuration
changed

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

juniper-o juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

Event
Type

Expedites
Polling

Juniper OSPF
bad packet
received on
virtual interface

Short
Description

Is Correlation
Allowed

Juniper Netscreen V2 Trap Registry Parameters (Continued)

Correlate

Table 10-46

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-358

OL-24429-01

Chapter 10

Traps
Juniper T-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

info T

Juniper Warm
start trap

juniper
juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

juniper
line
down
trap

juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

juniper
line
down
trap

juniper line up
trap

ip interface oper
status

IIPInterface

clr

Juniper SNMP
authentication
failure

juniper snmp
juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

1
9
0
0
0
0

Severity

Auto Clear

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

juniper
juniper cold
cold start start trap
trap

Event
Type

Expedites
Polling

Juniper Cold
start trap

Short
Description

Is Correlation
Allowed

Juniper Netscreen V2 Trap Registry Parameters (Continued)

Correlate

Table 10-46

Juniper T-Series V1 Traps Registry Parameters


Juniper T-Series V1 traps registery parameters supported in Cisco ANA is the same as the Juniper
M-Series V1 traps registery parameters. For more details on the Juniper M-Series V1 traps registery
parameters see Table 10-41.

Juniper T-Series V2 Traps Registry Parameters


Juniper T-Series V2 traps registery parameters supported in Cisco ANA is the same as the Juniper
M-Series V2 traps registery parameters. For more details on the Juniper M-Series V2 traps registery
parameters see Table 10-42.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-359

Chapter 10

Traps

Juniper JCS-Series V1 Traps Registry Parameters

Juniper JCS-Series V1 Traps Registry Parameters


Table 10-49 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
JCS-series V1 traps shown in Table 10-20.

Auto
Remove

Flapping

min F

Juniper OSPF
neighbor state
down

Juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

Juniper OSPF
neighbor state
up

Juniper ospf
Juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-down
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IManagedEle F
ment

min F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

Juniper ospf
virtual if state
down

Event Source
(IMO Name)

Juniper
ospf
virtual if
state
down

Event
Type

Expedites
Polling

Juniper OSPF
virtual interface
state changed to
Down

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters

Correlate

Table 10-47

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-360

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IManagedEle F
ment

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Juniper OSPF
bad packet
received on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

IManagedEle F
ment

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IIPInterface

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Juniper OSPF
interface state
changed to
Down

Juniper
ospf if
state
down

Juniper ospf if
state down

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

Juniper
ospf if
state
down

Juniper ospf if
state up

IIPInterface

clr

Event
Subtype

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IIPInterface

Event Source
(IMO Name)

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

Event
Type

Expedites
Polling

Juniper OSPF
interface
authentication
failure

Short
Description

Correlate

JCS V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-47

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-361

Chapter 10

Traps

Juniper JCS-Series V1 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

Juniper BGP
down trap

Juniper
bgp trap

Juniper bgp
down trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

maj F

Juniper new
root trap

Juniper
new root
trap

Juniper new
root trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

Juniper- Juniper-Spanni N
Spanning ng-Tree-Topol
-Tree-To ogy-Change
pology-C
hange-Tr
ap

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

label switching
table,
mpls-ldp-peers

ILse

clr

label switching
table,
mpls-ldp-peers

ILse

maj F

label switching
table,
mpls-ldp-peers

ILse

maj F

Expedites
Polling

Event
Subtype
Juniper Entity
table
configuration
changed

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

Down

Severity

Is Correlation
Allowed

Juniper bgp
established
trap

Event
Type

Event Source
(IMO Name)

Juniper BGP
Juniper
established trap bgp trap

Short
Description

Correlate

JCS V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-47

juniper mpls lsp


path down trap

juniper
mpls lsp
path
down

juniper mpls
lsp path down

IManagedEle F
ment

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

juniper aps
event switch
over trap

juniper aps
juniper
aps event event switch
over
switch
over

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-362

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper aps
event channel
mismatch trap

juniper aps
juniper
aps event event channel
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event psbf trap

juniper aps
juniper
aps event event psbf
switch
over

IManagedEle F
ment

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

juniper vpn if
up

IManagedEle F
ment

clr

Juniper VPN
Interface Down

juniper
vpn if
down

juniper vpn if
down

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

juniper power
supply failure
Trap

juniper
fru
power
off

juniper power
supply failure

physical
command

IModule

min T

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

juniper over
temperature
Trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper aps
juniper
aps event event mode
mismatch
switch
over

Event
Type

Event Source
(IMO Name)

juniper aps
event mode
mismatch trap

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-363

Chapter 10

Traps

Juniper JCS-Series V1 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

physical
command

IModule

info T

Expedites
Polling

Event
Subtype

Is Ticketable

Is Correlation
Allowed

juniper
juniper
redundancy
fru
switch over Trap power

Severity

Correlate

juniper
redundancy
switch over

Event
Type

Event Source
(IMO Name)

Activate
Flow

JCS V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-47

off
Card Out trap

card out
trap

card out trap

physical
command

IModule

maj F

Card In trap

card out
trap

card in trap

physical
command

IModule

clr

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

Card Down Trap juniper

fru
power
off
Card Up Trap

power
off
juniper fru
offline Trap

juniper
fru
power
off

juniper fru
offline

physical
command

IModule

maj F

juniper fru
online Trap

juniper
fru
power
off

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper Sp svc
set zone
entered

IManagedEle F
ment

maj T

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-364

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj T

juniper Sp svc
set cpu ok trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu ok

IManagedEle F
ment

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


pps under
threshold trap

N
juniper dfc
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem under
threshold trap

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

Event
Subtype
juniper dfc
hard pps
threshold
exceeded

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper Sp svc
set cpu
exceeded

Event Source
(IMO Name)

juniper
Sp svc
set zone
entered

Event
Type

Expedites
Polling

juniper Sp svc
set cpu
exceeded trap

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-365

Chapter 10

Traps

Juniper JCS-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

maj F

juniper dfc hard


mem under
threshold trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
under
threshold

IManagedEle F
ment

maj F

juniper power
supply ok trap

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

IManagedEle F
ment

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Expedites
Polling

Event
Subtype

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Is Ticketable

Auto Clear

Severity

Weight

juniper dfc
hard mem
threshold
exceeded

Activate
Flow

juniper
dfc soft
pps
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper dfc hard


mem threshold
exceeded trap

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper ldp
session up trap

juniper ldp
juniper
session up
ldp
notificati
on

IManagedEle F
ment

clr

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-366

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

juniper Cm
rescue change
trap

juniper
Cm cfg
change

juniper Cm
rescue change

IManagedEle F
ment

info F

juniper sonet
alarm set trap

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper sonet
alarm cleared
trap

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

juniper PMon
overload set

IManagedEle F
ment

maj F

juniper PMon
overload
cleared

IManagedEle F
ment

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper coll
flow overload

IManagedEle F
ment

maj F

Event
Subtype

juniper Cm cfg
change trap

juniper PMon
juniper
overload set trap PMon

Is Ticketable

Auto Clear

Severity

Weight

juniper ldp
juniper
session down
ldp
notificati
on

Activate
Flow

juniper ldp
session down
trap

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

overload
set
juniper PMon
overload
cleared trap

juniper
PMon
overload
set

juniper coll
juniper
unavailable dest coll
trap
unavaila

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

juniper coll flow juniper


overload trap
coll

unavaila
ble dest

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-367

Chapter 10

Traps

Juniper JCS-Series V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper coll
memory
available

IManagedEle F
ment

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt


threshold
exceeded trap

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping rtt N


std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

Event
Subtype

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Event
Type

juniper coll flow juniper


overload
coll
cleared trap
unavaila

Expedites
Polling

juniper coll
flow overload
cleared

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest
juniper coll
memory
available trap

juniper
coll
unavaila
ble dest

juniper coll ftp


juniper
switch over trap coll

unavaila
ble dest

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
egress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress jitter
threshold
exceeded

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-368

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V1 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2
backward
transition trap

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

Juniper Cold
start trap

Juniper
Juniper cold
cold start start trap
trap

IManagedEle F
ment

1
9
0
0
0
0

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

Juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

Juniper
line
down
trap

Juniper line up ip interface oper


trap
status

IIPInterface

clr

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

juniper bgp M2 juniper


established trap bgp M2

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

juniper ping
ingress
threshold
exceeded

Event Source
(IMO Name)

juniper
ping rtt
threshold
exceeded

Event
Type

Expedites
Polling

juniper ping
ingress
threshold
exceeded trap

Short
Description

Is Correlation
Allowed

JCS V1 Trap Registry Parameters (Continued)

Correlate

Table 10-47

establish
ed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-369

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Juniper
Ospf
lsdb trap

Juniper Ospf
lsdb trap

IManagedEle F
ment

min F

Juniper
tcp
connecti
on table
trap

Juniper tcp
connection
table trap

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

Juniper Ospf
lsdb trap

Event Source
(IMO Name)

Juniper
Ospf
lsdb trap

Event
Type

Expedites
Polling

Is Correlation
Allowed

Juniper OSPF
lsdb
approaching
overflow trap
Juniper OSPF
lsdb
approaching
overflow trap
Juniper TCP
connection table
trap

Correlate

JCS V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-47

Juniper JCS-Series V2 Traps Registry Parameters


Table 10-48 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
JCS-series V1 traps shown in Table 10-21.

Auto Clear

Auto
Remove

Flapping

IIPInterface

info F

Juniper OSPF
interface state
changed to Up

Juniper
ospf if
state
down

Juniper ospf if
state up

IIPInterface

clr

Juniper OSPF
virtual interface
state changed to
Down

Juniper
ospf
virtual if
state
down

Juniper ospf
virtual if state
down

IManagedEle F
ment

min F

Event
Subtype

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Juniper ospf if
state down

Event Source
(IMO Name)

Juniper
ospf if
state
down

Event
Type

Expedites
Polling

Juniper OSPF
interface state
changed to
Down

Short
Description

Correlate

JCS V2 Traps Registry Parameters

Activate
Flow

Table 10-48

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-370

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj F

Juniper OSPF
neighbor state
up

Juniper ospf
Juniper
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

Juniper OSPF
virtual neighbor
state down

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-down
bor-state
-changed

IOspfEntry

min T

Juniper OSPF
virtual neighbor
state up

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-neighboral-neigh state-up
bor-state
-changed

IOspfEntry

clr

Juniper OSPF
interface
configuration
error
Juniper OSPF
virtual interface
configuration
error

Juniper-o Juniper-ospf-if N
spf-if-co -config-err
nfig-err

IIPInterface

wrn T

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-configal-if-con err
fig-err

IManagedEle F
ment

min F

Juniper OSPF
interface
authentication
failure

Juniper-o Juniper-ospf-if N
spf-if-aut -authentic-fail
hentic-fa
il

IIPInterface

wrn T

Juniper OSPF
virtual interface
authentication
failure

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-authent
al-if-auth ic-fail
entic-fail

IManagedEle F
ment

wrn T

Juniper OSPF
bad packet
received

Juniper-o Juniper-ospf-if N
spf-if-ba -bad-packet
d-packet

IIPInterface

min F

Event
Subtype

Is Ticketable

Weight

IIPInterface

Severity

Is Correlation
Allowed

Event Source
(IMO Name)

Juniper ospf
Juniper
neighbor state
ospf
neighbor down
state
down

Event
Type

Expedites
Polling

Juniper OSPF
neighbor state
down

Short
Description

Correlate

JCS V2 Traps Registry Parameters

Activate
Flow

Table 10-48

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-371

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Juniper OSPF
packet
retransmitted

Juniper-o Juniper-ospf-if N
spf-if-pa -packet-retrans
cket-retr mit
ansmit

IIPInterface

min F

Juniper OSPF
packet
retransmitted on
virtual interface

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-packetal-if-pac retransmit
ket-retra
nsmit

IManagedEle F
ment

min F

Juniper OSPF
new LSA
originated

Juniper-o Juniper-ospf-n N
spf-new- ew-lsa-originat
lsa-origi ed
nated

IManagedEle F
ment

min F

Juniper OSPF
LSA aged to
MaxAge

Juniper-o Juniper-ospf-ls N
spf-lsa-r a-reached-max
eached- age
maxage

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Juniper-o Juniper-ospf-vi N
spf-virtu rtual-if-bad-pa
al-if-bad cket
-packet

Event
Type

Expedites
Polling

Juniper OSPF
bad packet
received on
virtual interface

Short
Description

Is Correlation
Allowed

JCS V2 Traps Registry Parameters

Correlate

Table 10-48

Juniper BGP
Juniper
established trap bgp trap

Juniper bgp
established
trap

IBgpNeighbo F
urEntry

maj F

Juniper BGP
down trap

Juniper
bgp trap

Juniper bgp
down trap

IBgpNeighbo F
urEntry

clr

Juniper new
root trap

Juniper
new root
trap

Juniper new
root trap

IManagedEle F
ment

info F

Juniper
Spanning Tree
Topology
Changed

Juniper- Juniper-Spanni N
Spanning ng-Tree-Topol
-Tree-To ogy-Change
pology-C
hange-Tr
ap

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Juniper
Entity
table
configur
ation
changed

IManagedEle F
ment

info F

Juniper Entity
table
configuration
changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-372

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps Registry Parameters

Is Correlation
Allowed

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

ILse

clr

Down
juniper mpls Lsp juniper
juniper mpls
Down trap
mpls Lsp Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

Down
juniper mpls Lsp juniper
juniper mpls
Change trap
mpls Lsp Lsp Change

label switching
table,
mpls-ldp-peers

ILse

maj F

Down

Severity

Correlate

juniper mpls Lsp juniper


juniper mpls
Up trap
mpls Lsp Lsp Up

Event Source
(IMO Name)

label switching
table,
mpls-ldp-peers

Expedites
Polling

Event
Type

Activate
Flow

JCS V2 Traps Registry Parameters

Event
Subtype

Short
Description

Table 10-48

juniper mpls lsp


path down trap

juniper
mpls lsp
path
down

juniper mpls
lsp path down

IManagedEle F
ment

maj F

juniper mpls lsp


path up trap

juniper
mpls lsp
path
down

juniper mpls
lsp path up

IManagedEle F
ment

clr

juniper aps
event switch
over trap

juniper aps
juniper
aps event event switch
over
switch
over

IManagedEle F
ment

maj F

juniper aps
event mode
mismatch trap

juniper aps
juniper
aps event event mode
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event channel
mismatch trap

juniper aps
juniper
aps event event channel
mismatch
switch
over

IManagedEle F
ment

maj F

juniper aps
event psbf trap

juniper aps
juniper
aps event event psbf
switch
over

IManagedEle F
ment

maj F

juniper aps
event feplf trap

juniper aps
juniper
aps event event feplf
switch
over

IManagedEle F
ment

maj F

Juniper VPN
Interface Up

juniper
vpn if
down

IManagedEle F
ment

clr

juniper vpn if
up

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-373

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

IManagedEle F
ment

maj F

juniper vpn
power up trap

juniper
vpn if
down

juniper vpn
power up

IManagedEle F
ment

clr

juniper vpn
power down
trap

juniper
vpn if
down

juniper vpn
power down

IManagedEle F
ment

info F

juniper power
supply failure
Trap

juniper
fru
power
off

juniper power
supply failure

physical
command

IModule

min T

juniper fru
offline Trap

juniper
fru
power
off

juniper fru
offline

physical
command

IModule

maj F

juniper fru
online Trap

juniper
fru
power
off

juniper fru
online

physical
command

IModule

clr

juniper fru
check Trap

juniper
fru
power
off

juniper fru
check

physical
command

IModule

min F

juniper fan
failure Trap

juniper
fru
power
off

juniper fan
failure

physical
command

IModule

info T

juniper over
temperature
Trap

juniper
fru
power
off

juniper over
temperature

physical
command

IModule

info T

juniper
juniper
redundancy
fru
switch over Trap power

juniper
redundancy
switch over

physical
command

IModule

info T

juniper fru
removal

physical
command

IModule

maj F

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

juniper vpn if
down

Activate
Flow

juniper
vpn if
down

Event
Type

Event Source
(IMO Name)

Juniper VPN
Interface Down

Short
Description

Is Correlation
Allowed

JCS V2 Traps Registry Parameters

Correlate

Table 10-48

off
juniper fru
removal Trap

juniper
fru
power
off

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-374

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

physical
command

IModule

clr

Card Down Trap juniper

juniper fru
power off

physical
command

IModule

maj T

juniper
fru
power
off

juniper fru
power on

physical
command

IModule

clr

juniper fru failed juniper


Trap
fru

juniper fru
failed

physical
command

IModule

maj T

juniper Sp svc
set zone
entered

IManagedEle F
ment

maj T

fru
power
off
Card Up Trap

Expedites
Polling

Event
Subtype

Severity

Is Correlation
Allowed

juniper fru
insertion

juniper fru
insertion Trap

Event
Type

Event Source
(IMO Name)

juniper
fru
power
off

Short
Description

Correlate

JCS V2 Traps Registry Parameters

Activate
Flow

Table 10-48

power
off
juniper Sp svc
juniper
set zone entered Sp svc
trap
set zone

entered
juniper Sp svc
set zone exited
trap

juniper
Sp svc
set zone
entered

juniper Sp svc N
set zone exited

IManagedEle F
ment

maj T

juniper Sp svc
set cpu
exceeded trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu
exceeded

IManagedEle F
ment

maj T

juniper Sp svc
set cpu ok trap

juniper
Sp svc
set zone
entered

juniper Sp svc
set cpu ok

IManagedEle F
ment

clr

juniper dfc soft


pps threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft pps threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


pps under
threshold trap

juniper dfc soft N


juniper
dfc soft pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-375

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper dfc hard


pps under
threshold trap

juniper dfc
N
juniper
dfc soft hard pps under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem threshold
exceeded trap

juniper dfc soft N


juniper
dfc soft mem threshold
exceeded
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc soft


mem under
threshold trap

juniper dfc soft N


juniper
dfc soft mem under
threshold
pps
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem threshold
exceeded trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
threshold
exceeded

IManagedEle F
ment

maj F

juniper dfc hard


mem under
threshold trap

juniper
dfc soft
pps
threshold
exceeded

juniper dfc
hard mem
under
threshold

IManagedEle F
ment

maj F

juniper power
supply ok trap

juniper
power
supply
ok

juniper power
supply ok

physical
command

IModule

info F

juniper fan ok
trap

juniper
power
supply
ok

juniper fan ok

physical
command

IModule

info F

juniper
temperature ok
trap

juniper
power
supply
ok

juniper
physical
temperature ok command

IModule

info F

Expedites
Polling

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

juniper dfc
hard pps
threshold
exceeded

Activate
Flow

juniper
dfc soft
pps
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper dfc hard


pps threshold
exceeded trap

Short
Description

Is Correlation
Allowed

JCS V2 Traps Registry Parameters

Correlate

Table 10-48

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-376

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj F

juniper Rmon
get ok

IManagedEle F
ment

clr

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Activate
Flow

IManagedEle F
ment

juniper Rmon
juniper Rmon
juniper
alarm get failure Rmon
alarm get
trap
alarm get failure

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Correlate

JCS V2 Traps Registry Parameters

Event
Subtype

Short
Description

Table 10-48

failure
juniper Rmon get juniper
ok trap
Rmon

alarm get
failure
juniper Ldp Lsp
Up trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Up

label switching
table,
mpls-ldp-peers

ILse

clr

juniper Ldp Lsp


Down trap

juniper
Ldp Lsp
Down

juniper Ldp
Lsp Down

label switching
table,
mpls-ldp-peers

ILse

maj F

juniper ldp
session up trap

juniper ldp
juniper
session up
ldp
notificati
on

IManagedEle F
ment

clr

juniper ldp
session down
trap

juniper ldp
juniper
session down
ldp
notificati
on

IManagedEle F
ment

maj F

juniper Cm cfg
change trap

juniper
Cm cfg
change

juniper Cm cfg N
change

IManagedEle F
ment

maj F

juniper Cm
rescue change
trap

juniper
Cm cfg
change

juniper Cm
rescue change

IManagedEle F
ment

info F

juniper sonet
alarm set trap

juniper
juniper sonet
sonet
alarm set
alarm set

IManagedEle F
ment

maj F

juniper sonet
alarm cleared
trap

juniper
juniper sonet
sonet
alarm cleared
alarm set

IManagedEle F
ment

clr

IManagedEle F
ment

maj F

juniper PMon
juniper
overload set trap PMon

juniper PMon
overload set

overload
set

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-377

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

juniper coll
unavailable
dest

IManagedEle F
ment

maj F

juniper coll
unavailable
dest cleared

IManagedEle F
ment

clr

juniper coll
unsuccessful
transfer

IManagedEle F
ment

maj F

juniper coll
flow overload

IManagedEle F
ment

maj F

juniper coll
flow overload
cleared

IManagedEle F
ment

clr

juniper coll
memory
unavailable

IManagedEle F
ment

maj F

juniper coll
memory
available

IManagedEle F
ment

clr

juniper coll ftp N


switch over

IManagedEle F
ment

maj F

juniper ping rtt N


juniper
threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

juniper coll
juniper
unavailable dest coll
trap
unavaila

Event
Subtype

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper
PMon
overload
set

Event Source
(IMO Name)

juniper PMon
overload
cleared

Event
Type

Expedites
Polling

Is Correlation
Allowed

juniper PMon
overload
cleared trap

Correlate

JCS V2 Traps Registry Parameters

Short
Description

Table 10-48

ble dest
juniper coll
juniper
unavailable dest coll
cleared trap
unavaila

ble dest
juniper coll
unsuccessful
transfer trap

juniper
coll
unavaila
ble dest

juniper coll flow juniper


overload trap
coll

unavaila
ble dest
juniper coll flow juniper
overload
coll
cleared trap
unavaila

ble dest
juniper coll
juniper
memory
coll
unavailable trap unavaila

ble dest
juniper coll
memory
available trap

juniper
coll
unavaila
ble dest

juniper coll ftp


juniper
switch over trap coll

unavaila
ble dest
juniper ping rtt
threshold
exceeded trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-378

OL-24429-01

Chapter 10

Traps
Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

maj F

juniper ping rtt


jitter threshold
exceeded trap

juniper ping rtt N


juniper
jitter threshold
ping rtt
threshold exceeded
exceeded

IManagedEle F
ment

maj F

IManagedEle F
ment

maj F

Event
Subtype

juniper ping
juniper ping
juniper
egress threshold ping rtt
egress
exceeded trap
threshold threshold

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

juniper ping rtt N


std dev
threshold
exceeded

Event
Type

Event Source
(IMO Name)

juniper
ping rtt
threshold
exceeded

Expedites
Polling

juniper ping rtt


std dev
threshold
exceeded trap

Short
Description

Is Correlation
Allowed

JCS V2 Traps Registry Parameters

Correlate

Table 10-48

exceeded exceeded
juniper ping
egress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
egress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
egress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress std dev
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

N
juniper ping
ingress std dev
threshold
exceeded

IManagedEle F
ment

maj F

juniper ping
ingress jitter
threshold
exceeded trap

juniper
ping rtt
threshold
exceeded

juniper ping
ingress jitter
threshold
exceeded

IManagedEle F
ment

maj F

juniper bgp M2 N
established

IManagedEle F
ment

clr

juniper bgp M2 N
juniper
bgp M2 backward
establish transition
ed

IManagedEle F
ment

maj F

juniper bgp M2 juniper


established trap bgp M2

establish
ed
juniper bgp M2
backward
transition trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-379

Chapter 10

Traps

Juniper JCS-Series V2 Traps Registry Parameters

Auto
Remove

Flapping

info T

Juniper Warm
start trap

Juniper
Juniper warm
warm
start trap
start trap

IManagedEle F
ment

min T

Juniper Line
down trap

Juniper
line
down
trap

Juniper line
down trap

ip interface oper
status

IIPInterface

maj F

Juniper Line up
trap

Juniper
line
down
trap

Juniper line up ip interface oper


trap
status

IIPInterface

clr

Juniper SNMP
authentication
failure

Juniper snmp
Juniper
authentication
snmp
authentic failure
ation
failure

IManagedEle F
ment

info F

Juniper OSPF
lsdb
approaching
overflow trap
Juniper OSPF
lsdb
approaching
overflow trap
Juniper TCP
connection table
trap

Juniper
Ospf
lsdb trap

Juniper Ospf
lsdb trap

IManagedEle F
ment

min F

Juniper
Ospf
lsdb trap

Juniper Ospf
lsdb trap

IManagedEle F
ment

min F

Juniper
tcp
connecti
on table
trap

Juniper tcp
connection
table trap

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

1
9
0
0
0
0

Severity

Auto Clear

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

Juniper
Juniper cold
cold start start trap
trap

Event
Type

Expedites
Polling

Juniper Cold
start trap

Short
Description

Is Correlation
Allowed

JCS V2 Traps Registry Parameters

Correlate

Table 10-48

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-380

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps Registry Parameters

RAD ACE V1 Traps Registry Parameters


Table 10-49 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
RAD ACE V1 traps shown in Table 10-22.

Auto
Remove

Flapping

rad-link- rad-link-down- N
down-v1 v1

IPhysicalLay
er

maj T

rad link up trap

rad-link- rad-link-up-v1
down-v1

IPhysicalLay
er

clr

Agent status
normal

agent-St agent-Status-C N
atus-Cha hangeTrap-Cle
ngeTrap ared

IManagedEle F
ment

clr

Agent status
change trap
minor

agent-St agent-Status-C N
atus-Cha hangeTrap-Mi
ngeTrap nor

IManagedEle F
ment

min T

Agent status
change trap
major

agent-St agent-Status-C N
atus-Cha hangeTrap-Maj
ngeTrap or

IManagedEle F
ment

maj T

tftp Status
Change Trap

tftp-Stat
us-Chan
geTrap

tftp-Status-Cha N
ngeTrap

IManagedEle F
ment

info T

rad
authentication
failure v1

rad-auth
enticatio
n-failure
-v1

rad-authenticat N
ion-failure-v1

IManagedEle F
ment

min T

agent Fan
Failure Trap On

agent
agent
FanFailu FanFailure
re Trap
Trap failure

IModule

maj T

agent
FanFailure
Trap recovery

IModule

clr

license update
trap

IManagedEle F
ment

info T

agent Fan
agent
Failiure Trap Off FanFailu

re Trap
license update
trap

license
update
trap

Expedites
Polling

Event
Subtype

rad link down


trap

Is Ticketable

info T

Severity

Auto Clear

2
E
+
0
5

rad cold rad cold start


start trap trap

Weight

rad Cold start


trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

RAD ACE V1 Trap Registry Parameters

Correlate

Table 10-49

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-381

Chapter 10

Traps

RAD ACE V1 Traps Registry Parameters

Auto
Remove

Flapping

info T

agent-Cl
kSrc-Fre
quencyAlarmTr
ap

agent-ClkSrc-F N
requency-Alar
mTrap-On

IManagedEle F
ment

maj T

agent ClkSrc
Frequency
AlarmTrap Off

agent-Cl
kSrc-Fre
quencyAlarmTr
ap

agent-ClkSrc-F N
requency-Alar
mTrap-Off

IManagedEle F
ment

clr

agent upload
data trap

agent
upload
data trap

agent upload
data trap

IManagedEle F
ment

info T

agent self test


result failed

agent-Se SelfTest-Resul
lfTest-Re t-Failed
sult-Cha
ngeTrap

IManagedEle F
ment

maj T

agent self test


result passed

agent-Se agent-SelfTest- N
lfTest-Re Result-Passed
sult-Cha
ngeTrap

IManagedEle F
ment

clr

prt Status
Un-plugged

prt-Statu prt-StatusChan N
sChange- ge-Un-plugged
Trap

IPhysicalLay
er

info T

This trap is sent


whenever the
state of a
ethernet port
changed to
Plugged.
atm AceAlarm
LOS On

prt-Statu prt-StatusChan N
sChange- ge-plugged
Trap

IPhysicalLay
er

clr

atm-Ace
Alarm-L
OS

atm-AceAlarm N
-LOS-On

IPhysicalLay
er

maj T

atm AceAlarm
LOS Off

atm-Ace
Alarm-L
OS

atm-AceAlarm N
-LOS-Off

IPhysicalLay
er

clr

Event
Subtype

agent ClkSrc
Frequency
AlarmTrap On

Is Ticketable

Auto Clear

Severity

Weight

agent
agent
ClkSrcSt ClkSrcState
ChangeTrap
ate
ChangeT
rap

Activate
Flow

agent clksrc
state change
trap

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

RAD ACE V1 Trap Registry Parameters (Continued)

Correlate

Table 10-49

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-382

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj T

atm AceAlarm
LOF Off

atm-Ace
Alarm-L
OF

atm-AceAlarm N
-LOF-Off

IPhysicalLay
er

clr

atm AceAlarm
LCD On

atm-Ace
Alarm-L
CD

atm-AceAlarm N
-LCD-On

IPhysicalLay
er

maj T

atm AceAlarm
LCD Off

atm-Ace
Alarm-L
CD

atm-AceAlarm N
-LCD-Off

IPhysicalLay
er

clr

atm AceAlarm
LineAIS On

atm-Ace atm-AceAlarm N
Alarm-Li -LineAIS-On
neAIS

IPhysicalLay
er

maj T

atm AceAlarm
LineAIS Off

atm-Ace atm-AceAlarm N
Alarm-Li -LineAIS-Off
neAIS

IPhysicalLay
er

clr

atm AceAlarm
LineRDI On

atm-Ace atm-AceAlarm N
Alarm-Li -LineRDI-On
neRDI

IPhysicalLay
er

maj T

atm AceAlarm
LineRDI Off

atm-Ace atm-AceAlarm N
Alarm-Li -LineRDI-Off
neRDI

IPhysicalLay
er

clr

atm AceAlarm
LineFEBE On

atm-Ace atm-AceAlarm N
Alarm-Li -LineFEBE-On
neFEBE

IPhysicalLay
er

maj T

atm AceAlarm
LineFEBE Off

atm-Ace atm-AceAlarm N
Alarm-Li -LineFEBE-Of
neFEBE f

IPhysicalLay
er

clr

atm AceAlarm
atm-Ace atm-AceAlarm N
VpAIS Reception Alarm-V -VpAIS-Recep
On
pAIS-Re tion-On

IPhysicalLay
er

min T

IPhysicalLay
er

clr

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IPhysicalLay
er

Event Source
(IMO Name)

atm-AceAlarm N
-LOF-On

Expedites
Polling

atm-Ace
Alarm-L
OF

Event
Type

Event
Subtype

atm AceAlarm
LOF On

Short
Description

Correlate

RAD ACE V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-49

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VpAIS Reception Alarm-V -VpAIS-Recep
Off
pAIS-Re tion-Off

ception

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-383

Chapter 10

Traps

RAD ACE V1 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

min T

IPhysicalLay
er

clr

IPhysicalLay
er

min T

IPhysicalLay
er

clr

IPhysicalLay
er

min T

IPhysicalLay
er

clr

Is Ticketable

Is Correlation
Allowed

Severity

Correlate

IPhysicalLay
er

Event Source
(IMO Name)

Activate
Flow

atm AceAlarm
atm-Ace atm-AceAlarm N
VcAIS Reception Alarm-V -VcAIS-Recep
On
cAIS-Re tion-On

Expedites
Polling

Event
Type

Event
Subtype

RAD ACE V1 Trap Registry Parameters (Continued)

Short
Description

Table 10-49

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VcAIS Reception Alarm-V -VcAIS-Recep
Off
cAIS-Re tion-Off

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VcAIS Reception Alarm-V -VpRDI-Recep
On
pRDI-Re tion-On

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VcAIS Reception Alarm-V -VpRDI-Recep
Off
pRDI-Re tion-Off

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VcRDI Reception Alarm-V -VcRDI-Recep
On
cRDI-Re tion-On

ception
atm AceAlarm
atm-Ace atm-AceAlarm N
VcRDI Reception Alarm-V -VcRDI-Recep
Off
cRDI-Re tion-Off

ception
atm AceAlarm
VpContinuity
Loss On

atm-Ace atm-AceAlarm N
Alarm-V -VpContinuitypContinu Loss-On
ity-Loss

IPhysicalLay
er

min T

atm AceAlarm
VpContinuity
Loss Off

atm-Ace atm-AceAlarm N
Alarm-V -VpContinuitypContinu Loss-Off
ity-Loss

IPhysicalLay
er

clr

atm AceAlarm
VcContinuity
Loss On

atm-Ace atm-AceAlarm N
Alarm-V -VcContinuitycContinu Loss-On
ity-Loss

IPhysicalLay
er

min T

atm AceAlarm
VcContinuity
Loss Off

atm-Ace atm-AceAlarm N
Alarm-V -VcContinuitycContinu Loss-Off
ity-Loss

IPhysicalLay
er

clr

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-384

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min T

atm AceAlarm
VpLoopback Off

atm-Ace atm-AceAlarm N
Alarm-V -VpLoopbackpLoopba Off
ck

IPhysicalLay
er

clr

atm AceAlarm
VcLoopback On

atm-Ace atm-AceAlarm N
Alarm-V -VcLoopbackcLoopba On
ck

IPhysicalLay
er

min T

atm AceAlarm
VcLoopback Off

atm-Ace atm-AceAlarm N
Alarm-V -VcLoopbackcLoopba Off
ck

IPhysicalLay
er

clr

atmIma
GroupStatus
ChangeTrap

atmIma- atmIma-Group N
GroupSt Status-Change
atus-Cha Trap
ngeTrap

ILogicalLaye F
r

min T

agent Power
Failure

agent
PowerFa
ilure
Trap

IModule

maj T

agent-Power-F N
ailure-recovery

IModule

clr

agent Power
agent
Failure recovery PowerFa

Expedites
Polling

Event
Subtype
agent-Power-F
ailure

Is Ticketable

Weight

IPhysicalLay
er

Severity

Is Correlation
Allowed

atm-Ace atm-AceAlarm N
Alarm-V -VpLoopbackpLoopba On
ck

Event
Type

Event Source
(IMO Name)

atm AceAlarm
VpLoopback On

Short
Description

Correlate

RAD ACE V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-49

ilure
Trap
rad MPLS LDP
session up Trap

rad-mpls rad-mpls-LdpS N
-LdpSess ession-up
ion-Dow
n

ILogicalLaye F
r

clr

rad MPLS LDP


session down
Trap

rad-mpls rad-mpls-LdpS N
-LdpSess ession-Down
ion-Dow
n

ILogicalLaye F
r

min F

bfd Session Up

bfd-Sess
-Down

bfd-Sess-Up

IManagedEle F
ment

clr

bfd Session
Down

bfd-Sess
-Down

bfd-Sess-Dow
n

IManagedEle F
ment

min T

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-385

Chapter 10

Traps

RAD ACE V1 Traps Registry Parameters

Auto Clear

Is Ticketable

Auto
Remove

Flapping

ILogicalLaye F
r

clr

Pseudo wire
tunnel down

pw-Dow
n

pw-Down

ILogicalLaye F
r

min T

adslAturRateCh
ange Trap

adslAtur- adslAtur-Rate
RateCha Change-Trap
nge-Trap

IPhysicalLay
er

info T

atm AceAlarm
SLM Off

atm-Ace
Alarm-S
LM

atm-AceAlarm N
-SLM-Off

IPhysicalLay
er

clr

atm AceAlarm
SLM On

atm-Ace
Alarm-S
LM

atm-AceAlarm N
-SLM-On

IPhysicalLay
er

maj T

atm AceAlarm
LOP Off

atm-Ace
Alarm-L
OP

atm-AceAlarm N
-LOP-Off

IPhysicalLay
er

clr

atm AceAlarm
LOP On

atm-Ace
Alarm-L
OP

atm-AceAlarm N
-LOP-On

IPhysicalLay
er

maj T

atm AceAlarm
PathAIS Off

atm-Ace
Alarm-P
athAIS

atm-AceAlarm N
-PathAIS-Off

IPhysicalLay
er

clr

atm AceAlarm
PathAIS On

atm-Ace
Alarm-P
athAIS

atm-AceAlarm N
-PathAIS-On

IPhysicalLay
er

maj T

atm AceAlarm
PathRDI Off

atm-Ace
Alarm-P
athRDI

atm-AceAlarm N
-PathRDI-Off

IPhysicalLay
er

clr

atm AceAlarm
PathRDI On

atm-Ace
Alarm-P
athRDI

atm-AceAlarm N
-PathRDI-On

IPhysicalLay
er

maj T

atm AceAlarm
SectionBIP Off

atm-Ace
Alarm-S
ectionBI
P

atm-AceAlarm N
-SectionBIP-O
ff

IPhysicalLay
er

clr

atm AceAlarm
SectionBIP On

atm-Ace
Alarm-S
ectionBI
P

atm-AceAlarm N
-SectionBIP-O
n

IPhysicalLay
er

maj T

Event
Subtype

Severity

Weight

Activate
Flow

pw-Up

Event
Type

Event Source
(IMO Name)

pw-Up

Expedites
Polling

Pseudo wire
tunnel up

Short
Description

Is Correlation
Allowed

RAD ACE V1 Trap Registry Parameters (Continued)

Correlate

Table 10-49

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-386

OL-24429-01

Chapter 10

Traps
RAD ACE V1 Traps Registry Parameters

Weight

Auto Clear

Is Ticketable

Auto
Remove

Flapping

clr

atm AceAlarm
LineBIP On

atm-Ace atm-AceAlarm N
Alarm-Li -LineBIP-On
neBIP

IPhysicalLay
er

maj T

atm AceAlarm
PathBIP Off

atm-Ace
Alarm-P
athBIP

atm-AceAlarm N
-PathBIP-Off

IPhysicalLay
er

clr

atm AceAlarm
PathBIP On

atm-Ace
Alarm-P
athBIP

atm-AceAlarm N
-PathBIP-On

IPhysicalLay
er

maj T

atm AceAlarm
PathFEBE Off

atm-Ace atm-AceAlarm N
Alarm-P -PathFEBE-Of
athFEBE f

IPhysicalLay
er

clr

atm AceAlarm
PathFEBE On

atm-Ace atm-AceAlarm N
Alarm-P -PathFEBE-On
athFEBE

IPhysicalLay
er

maj T

agent Station
Clock Failure

agent-St agent-StationC N
ationClk lk-Failure
-FailureT
rap

IManagedEle F
ment

maj T

agent Station
Clock Failure
recovery

agent-St
ationClk
-Failurerecovery

agent-StationC N
lk-Failure-reco
very

IManagedEle F
ment

clr

agent Current
Clock State
Change Trap

agent-Cu agent-CurrClk N
rrClkStat State-ChangeT
e-Chang rap
eTrap

IManagedEle F
ment

info F

dot3Oam Oper
Status Change
Trap

dot3Oam dot3Oam-Oper N
-OperSta StatusChangetusChang Trap
e-Trap

IPhysicalLay
er

maj T

dot3Oam Peer
Event Trap

dot3Oam dot3Oam-Peer
-PeerEve Event-Trap
nt-Trap

IPhysicalLay
er

min T

hard Sync Start

hard-Syn hard-Sync-Star N
c-Start
t

IManagedEle F
ment

info T

hard Sync End

hard-Syn hard-Sync-End N
c-End

IManagedEle F
ment

info F

Event
Subtype
N

Severity

Is Correlation
Allowed

IPhysicalLay
er

Event Source
(IMO Name)

atm-Ace atm-AceAlarm N
Alarm-Li -LineBIP-Off
neBIP

Event
Type

Expedites
Polling

atm AceAlarm
LineBIP Off

Short
Description

Correlate

RAD ACE V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-49

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-387

Chapter 10

Traps

RAD ETX 204A V1 Traps Registry Parameters

RAD ETX 204A V1 Traps Registry Parameters


Table 10-50 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
RAD ETX 204AV1 traps shown in Table 10-24.

Auto
Remove

Flapping
F

rad-link- rad-link-down- N
down-v1 v1

IPhysicalLay
er

maj T

rad link up trap

rad-link- rad-link-up-v1
down-v1

IPhysicalLay
er

clr

Agent status
normal

agent-St agent-Status-C N
atus-Cha hangeTrap-Cle
ngeTrap ared

IManagedEle F
ment

info T

Agent status
change trap
minor

agent-St agent-Status-C N
atus-Cha hangeTrap-Mi
ngeTrap nor

IManagedEle F
ment

min T

Agent status
change trap
major

agent-St agent-Status-C N
atus-Cha hangeTrap-Maj
ngeTrap or

IPhysicalLay
er

min T

tftp Status
Change Trap

tftp-Stat
us-Chan
geTrap

tftp-Status-Cha N
ngeTrap

IManagedEle F
ment

info T

rad
authentication
failure v1

rad-auth
enticatio
n-failure
-v1

rad-authenticat N
ion-failure-v1

IManagedEle F
ment

min T

prt Status
Un-plugged

prt-Statu prt-StatusChan N
sChange- ge-Un-plugged
Trap

IPhysicalLay
er

info T

prt Status
plugged

prt-Statu prt-StatusChan N
sChange- ge-plugged
Trap

IPhysicalLay
er

clr

agent upload
data trap

agent
upload
data trap

IManagedEle F
ment

info T

Event
Subtype

rad link down


trap

agent upload
data trap

Is Ticketable

Severity

info T

Auto Clear
F

Weight
1
9
0
0
0
0

rad Cold rad Cold start


start trap trap

Activate
Flow

rad Cold start


trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

RAD ETX 204A V1 Traps Registry Parameters

Correlate

Table 10-50

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-388

OL-24429-01

Chapter 10

Traps
RAD ETX 204A V1 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

maj T

agent
FanFailure
Trap recovery

IModule

clr

re Trap
agent
PowerFa
ilure
Trap

agent-Power-F
ailure

IModule

maj T

agent Power
agent
Failure recovery PowerFa

agent-Power-F N
ailure-recovery

IModule

clr

rad-rising-Alar N
m -Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

war F

IManagedEle F
ment

maj T

Expedites
Polling

Is Ticketable

Is Correlation
Allowed

Severity

Correlate

IModule

agent
agent
FanFailu FanFailure
re Trap
Trap failure

Event Source
(IMO Name)

Event
Type

agent Fan
agent
Failiure Trap Off FanFailu
agent Power
Failure

Activate
Flow

agent Fan
Failure Trap On

RAD ETX 204A V1 Traps Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-50

ilure
Trap
rad rising Alarm rad-risin
Trap
g-Alarm

-Trap
rad falling Alarm rad-fallin rad-falling
Trap
g-Alarm- Alarm Trap

Trap
agent Dying
Gasp Trap

agn-Dyin agn Dying


g-Gasp- Gasp Trap
Trap

dot3Oam Oper
Status Change
Trap

dot3Oam dot3Oam-Oper N
-OperSta StatusChangetusChang Trap
e-Trap

IPhysicalLay
er

maj T

dot3Oam Peer
Event Trap

dot3Oam dot3Oam-Peer
-PeerEve Event-Trap
nt-Trap

IPhysicalLay
er

min T

agn Temp
Threshold Trap

agn-Tem agn Temp


N
p-Thresh Threshold Trap
old-Trap

IManagedEle F
ment

info T

csm Domain
State Change
Trap

csm-Do csm-DomainSt N
mainStat ateChange-Tra
eChange p
-Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-389

Chapter 10

Traps

RAD ETX 204A V1 Traps Registry Parameters

Auto
Remove

Flapping

info T

csm Domain
Station State
Change Trap
unlocked

csm-Do
mainStat
ionState
ChangeTrap

csm-DomainSt N
ationStateChan
ge-Trap-unloc
ked

IManagedEle F
ment

info F

csm Source
Status Change
Trap

csm-Sou csm-SourceSta N
rceStatus tusChange-Tra
Change- p
Trap

IManagedEle F
ment

info T

IPhysicalLay
er

info T

IManagedEle F
ment

info T

IManagedEle F
ment

info T

Event
Subtype

eth OamCfm
N
eth-Oam eth OamCfm
Defect Condition Cfm-Def Defect
Trap
ect-Cond Condition Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

csm-Do csm-DomainSt N
mainStat ationStateChan
ionState ge-Trap-locked
ChangeTrap

Expedites
Polling

csm Domain
Station State
Change Trap
locked

Short
Description

Is Correlation
Allowed

RAD ETX 204A V1 Traps Registry Parameters (Continued)

Correlate

Table 10-50

ition-Tra
p
successful Login successf
Trap
ul-Login

successful
Login Trap

-Trap
failed Login Trap failed-Lo failed Login

gin-Trap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-390

OL-24429-01

Chapter 10

Traps
RAD IPmux-4L V1 Traps Registry Parameters

RAD IPmux-4L V1 Traps Registry Parameters


Table 10-51 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
RAD IPmux-4L V1 traps shown in Table 10-24.

Auto
Remove

Flapping
F

rad-link- rad-link-down- N
down-v1 v1

IPhysicalLay
er

maj T

rad link up trap

rad-link- rad-link-up-v1
down-v1

IPhysicalLay
er

clr

tftp Status
Change Trap

tftp-Stat
us-Chan
geTrap

tftp-Status-Cha N
ngeTrap

IManagedEle F
ment

info T

rad
authentication
failure v1

rad-auth
enticatio
n-failure
-v1

rad-authenticat N
ion-failure-v1

IManagedEle F
ment

min T

rad warm start


v1

rad-war rad-warm-start N
m-start-v -v1
1

IPhysicalLay
er

min T

dacs Mux
Alarms Trap

dacs-Mu dacs-Mux-Alar N
x-Alarms ms-Trap
-Trap

IManagedEle F
ment

maj T

bundle
Connection
Status Down

bundle-C bundle-Connec N
onnectio tion-Status-Do
n-Status- wn
Trap

IPhysicalLay
er

maj T

bundle
Connection
Status Up

bundle-C bundle-Connec N
onnectio tion-Status-Up
n-StatusTrap

IPhysicalLay
er

clr

Event
Subtype

rad link down


trap

Is Ticketable

Severity

info T

Auto Clear
F

Weight
1
9
0
0
0
0

rad Cold rad Cold start


start trap trap

Activate
Flow

rad Cold start


trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

RAD IPmux-4L V1 Traps Registry Parameters

Correlate

Table 10-51

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-391

Chapter 10

Traps

RAD LA-210 V1 Traps Registry Parameters

RAD LA-210 V1 Traps Registry Parameters


Table 10-52 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
RAD LA-210 V1 traps shown in Table 10-25.

Auto
Remove

Flapping

rad-link- rad-link-down- N
down-v1 v1

IPhysicalLay
er

maj T

rad link up trap

rad-link- rad-link-up-v1
down-v1

IPhysicalLay
er

clr

Agent status
normal

agent-St agent-Status-C N
atus-Cha hangeTrap-Cle
ngeTrap ared

IManagedEle F
ment

clr

Agent status
change trap
minor

agent-St agent-Status-C N
atus-Cha hangeTrap-Mi
ngeTrap nor

IManagedEle F
ment

min T

Agent status
change trap
major

agent-St agent-Status-C N
atus-Cha hangeTrap-Maj
ngeTrap or

IManagedEle F
ment

maj T

tftp Status
Change Trap

tftp-Stat
us-Chan
geTrap

tftp-Status-Cha N
ngeTrap

IManagedEle F
ment

info T

rad
authentication
failure v1

rad-auth
enticatio
n-failure
-v1

rad-authenticat N
ion-failure-v1

IManagedEle F
ment

min T

agent Power
Failure

agent
PowerFa
ilure
Trap

agent-Power-F
ailure

IModule

maj T

agent-Power-F N
ailure-recovery

IModule

clr

agent Power
agent
Failure recovery PowerFa

Expedites
Polling

Event
Subtype

rad link down


trap

Is Ticketable

info T

Severity

Auto Clear

1
9
0
0
0
0

rad Cold rad Cold start


start trap trap

Weight

rad Cold start


trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

RAD LA-210 V1 Traps Registry Parameters

Correlate

Table 10-52

ilure
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-392

OL-24429-01

Chapter 10

Traps
Tellabs V1 Traps Registry Parameters

Auto
Remove

Flapping

info T

rad-rising-Alar N
m -Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Is Ticketable

Severity

Auto Clear

IManagedEle F
ment

Activate
Flow

agent upload
data trap

Event Source
(IMO Name)

Weight

rad rising Alarm rad-risin


Trap
g-Alarm

Is Correlation
Allowed

agent
upload
data trap

Expedites
Polling

Event
Type

Correlate

agent upload
data trap

RAD LA-210 V1 Traps Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-52

-Trap
rad falling Alarm rad-fallin rad-falling
Trap
g-Alarm- Alarm Trap

Trap
rad hdsl2Shdsl
Loop Atten
Crossing Trap

hdsl2Shd hdsl2Shdsl-Lo N
sl-Loop- op-Atten-Cross
Atten-Cr ing-Trap
ossing-T
rap

IPhysicalLay
er

cri

rad hdsl2Shdsl
SNR Margin
Crossing Trap

hdsl2Shd hdsl2Shdsl-SN N
sl-SNR- R-Margin-Cros
Margin- sing-Trap
Crossing
-Trap

IPhysicalLay
er

cri

enrollment Trap

enrollme enrollment
nt-Trap
Trap

IManagedEle F
ment

info T

eth OamCfm
N
eth-Oam eth OamCfm
Defect Condition Cfm-Def Defect
Trap
ectCondi Condition Trap

IManagedEle F
ment

info T

tion-Trap

Tellabs V1 Traps Registry Parameters


Table 10-53 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Tellabs V1 traps shown in Table 10-26.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-393

Chapter 10

Traps

Tellabs V1 Traps Registry Parameters

Auto
Remove

Flapping

min F

tellabs OSPF
neighbor state
down

tellabs ospf
tellabs
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

tellabs OSPF
neighbor state
up

tellabs ospf
tellabs
neighbor state
ospf
neighbor up
state
down

IIPInterface

clr

tellabs OSPF
virtual neighbor
state down

tellabs
ospf-virt
ual-neig
hbor-stat
e-change
d

N
tellabs
ospf-virtual-ne
ighbor-state-do
wn

IOspfEntry

min T

tellabs OSPF
virtual neighbor
state up

tellabs
N
tellabs
ospf-virt ospf-virtual-ne
ual-neig ighbor-state-up
hbor-stat
e-change
d

IOspfEntry

clr

tellabs OSPF
interface
configuration
error
tellabs OSPF
virtual interface
configuration
error

tellabs
tellabs
ospf-if-c ospf-if-configonfig-err err

IIPInterface

wrn T

IManagedEle F
ment

min F

tellabs OSPF
interface
authentication
failure

tellabs
N
tellabs
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IIPInterface

wrn T

tellabs
ospf-virt
ual-if-co
nfig-err

Event
Subtype
N

tellabs
N
ospf-virtual-ifconfig-err

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

tellabs ospf
virtual if state
down

Event Source
(IMO Name)

tellabs
ospf
virtual if
state
down

Event
Type

Expedites
Polling

tellabs OSPF
virtual interface
state changed to
Down

Short
Description

Is Correlation
Allowed

Tellabs V1 Trap Registry Parameters

Correlate

Table 10-53

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-394

OL-24429-01

Chapter 10

Traps
Tellabs V1 Traps Registry Parameters

Auto
Remove

Flapping

wrn T

tellabs OSPF
bad packet
received

tellabs
tellabs
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

IIPInterface

min F

tellabs OSPF
bad packet
received on
virtual interface

tellabs
ospf-virt
ual-if-ba
d-packet

IManagedEle F
ment

min F

tellabs OSPF
packet
retransmitted

tellabs
N
tellabs
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

IIPInterface

min F

tellabs OSPF
packet
retransmitted on
virtual interface

tellabs
ospf-virt
ual-if-pa
cket-retr
ansmit

N
tellabs
ospf-virtual-ifpacket-retrans
mit

IManagedEle F
ment

min F

tellabs OSPF
new LSA
originated

tellabs
N
tellabs
ospf-new ospf-new-lsa-o
-lsa-origi riginated
nated

IManagedEle F
ment

min F

tellabs OSPF
LSA aged to
MaxAge

tellabs
N
tellabs
ospf-lsa- ospf-lsa-reache
reached- d-maxage
maxage

IManagedEle F
ment

info F

tellabs OSPF
interface state
changed to
Down

tellabs
ospf if
state
down

tellabs ospf if
state down

IIPInterface

info F

tellabs OSPF
interface state
changed to Up

tellabs
ospf if
state
down

tellabs ospf if
state up

IIPInterface

clr

tellabs bgp
established
trap

bgp-process-stat
e, bgp
neighbours

IMpBgp

clr

tellabs BGP
tellabs
established trap bgp trap

Expedites
Polling

Event
Subtype
N

tellabs
N
ospf-virtual-ifbad-packet

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

tellabs
N
tellabs
ospf-virt ospf-virtual-ifual-if-aut authentic-fail
hentic-fa
il

Event
Type

Event Source
(IMO Name)

tellabs OSPF
virtual interface
authentication
failure

Short
Description

Is Correlation
Allowed

Tellabs V1 Trap Registry Parameters (Continued)

Correlate

Table 10-53

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-395

Chapter 10

Traps

Tellabs V1 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

IMpBgp

maj F

tellabs new root tellabs


trap
new root

tellabs new
root trap

IManagedEle F
ment

info F

tellabs Spanning tellabs


N
tellabs
Tree Topology
Spanning Spanning-Tree
Changed
-Tree-To -Topology-Cha

IManagedEle F
ment

info F

IManagedEle F
ment

info F

Expedites
Polling

Event
Subtype

Is Ticketable

Weight

bgp-process-stat
e, bgp
neighbours

Severity

Is Correlation
Allowed

tellabs bgp
down trap

tellabs BGP
down trap

Event
Type

Event Source
(IMO Name)

tellabs
bgp trap

Short
Description

Correlate

Tellabs V1 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-53

trap

pology-C nge
hange-Tr
ap
tellabs Entity
table
configuration
changed

tellabs
Entity
table
configur
ation
changed

tellabs Entity
table
configuration
changed

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-396

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Tellabs V2 Traps Registry Parameters


Table 10-54 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Tellabs V2 traps shown in Table 10-27.

Auto
Remove

Flapping

info F

node Sw Ver
Switch
DbChange Trap

nodeSw nodeSwVerSwi N
VerSwitc tchDbChange
hDbCha Trap
nge Trap

IManagedEle F
ment

maj F

node Switch
nodeSwit nodeSwitchFa N
FabDegrade trap chFabDe bDegrade Trap

IManagedEle F
ment

maj F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

switchov switchover
DbChange
er
DbChan Trap
ge Trap

Event
Type

Expedites
Polling

switchover
DbChange Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters

Correlate

Table 10-54

grade
Trap
node Upgrade
End Db Change
Trap

nodeUpg nodeUpgradeE N
radeEnd ndDbChange
DbChan Trap
ge Trap

IManagedEle F
ment

info F

node Upgrade
End DbChange
trap

actSysCl actSysClk
k Change Change Trap
Trap

IManagedEle F
ment

info F

sysClk Failed
Trap

sysClk
Failed
Trap

sysClk Failed
Trap

IManagedEle F
ment

info F

temp Exceeded
Trap

temp
Exceede
d Trap

temp Exceeded N
Trap

IManagedEle F
ment

info F

i2c Failure Trap

i2c
Failure
Trap

i2c Failure
Trap

IManagedEle F
ment

info F

mgmtIp Up Trap

mgmtIp
Up Trap

mgmtIp Up
Trap

IManagedEle F
ment

info F

ntpAdminChan N
geDbChange
Trap

IManagedEle F
ment

info F

ntpAdminChang ntpAdmi
eDbChange Trap nChange

DbChan
ge Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-397

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

fan Fail Trap

fan Fail
Trap

fan Fail Trap

IManagedEle F
ment

maj F

fan Unplug Trap

fan
Unplug
Trap

fan Unplug
Trap

IManagedEle F
ment

maj F

power Outage
Trap

power
Outage
Trap

power Outage
Trap

IManagedEle F
ment

info F

power Failure
Trap

power
Failure
Trap

power Failure
Trap

IManagedEle F
ment

criti F
cal

card inserted
trap

card
inserted
trap

card inserted
trap

IManagedEle F
ment

info F

card Removed
Trap

card
card Removed
Removed Trap
Trap

IManagedEle F
ment

info F

card
AdminStChange
d Trap

card
card
AdminSt AdminStChan
Changed ged Trap
Trap

IManagedEle F
ment

info F

card
Mismatched
Trap

card
card
Mismatc Mismatched
hed Trap Trap

IManagedEle F
ment

info F

card online trap

card
online
trap

card online
trap

IManagedEle F
ment

info F

card Failed
Trap

IManagedEle F
ment

info F

card Failed Trap card

Failed
Trap

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

panel
Unplugged
Trap

Event Source
(IMO Name)

panel
Unplugg
ed Trap

Event
Type

Expedites
Polling

panel
Unplugged Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

card SwVer
Mismatched
Trap

card SwVer
card
Mismatched
SwVer
Mismatc Trap
hed Trap

IManagedEle F
ment

info F

enabled Card
Removed Trap

enabled enabled Card


Removed Trap
Card
Removed
Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-398

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

info F

IManagedEle F
ment

info F

sCard
RefClkFail
Trap

IManagedEle F
ment

criti F
cal

sCard RefClk
Dif Trap

IManagedEle F
ment

info F

card TxClk Fail


Trap

card
card TxClk
TxClk
Fail Trap
Fail Trap

sCard RefClkFail sCard


Trap
RefClkF

ail Trap
sCard RefClk Dif sCard
Trap
RefClk

Is Ticketable

Weight

card OffLine
Trap

Severity

Is Correlation
Allowed

card
OffLine
Trap

Activate
Flow

IManagedEle F
ment

card OffLine
Trap

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Dif Trap
enabled Card
Reset Trap

enabled
Card
Reset
Trap

enabled Card
Reset Trap

IManagedEle F
ment

info F

card Temp
Exceeded Trap

card
Temp
Exceede
d Trap

card Temp
N
Exceeded Trap

IManagedEle F
ment

info F

card Invalid
Boot Order Trap

card
Invalid
Boot
Order
Trap

card Invalid
Boot Order
Trap

IManagedEle F
ment

info F

enabled Card
Shutdown Trap

enabled
Card
Shutdow
n Trap

enabled Card
N
Shutdown Trap

IManagedEle F
ment

info F

card Degraded
Trap

card
Degrade
d Trap

card Degraded
Trap

IManagedEle F
ment

info F

sCard RefClk
No Tog Trap

IManagedEle F
ment

info F

cardFpga cardFpga
Upgrade Upgrade Trap
Trap

IManagedEle F
ment

maj F

sCard RefClk No sCard


Tog Trap
RefClk

No Tog
Trap
cardFpga
Upgrade Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-399

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

pcm Module
Offline Trap

pcm
Module
Offline
Trap

pcm Module
Offline Trap

IManagedEle F
ment

info F

pcm Module
Online Trap

pcm
Module
Online
Trap

pcm Module
Online Trap

IManagedEle F
ment

info F

pcm Module
Failed Trap

pcm
Module
Failed
Trap

pcm Module
Failed Trap

IManagedEle F
ment

maj F

pcm Module
Mismatch Trap

pcm
Module
Mismatc
h Trap

pcm Module
N
Mismatch Trap

IManagedEle F
ment

maj F

pcmModuleAdm pcmMod pcmModuleAd N


inChg Trap
uleAdmi minChg Trap

IManagedEle F
ment

info F

IManagedEle F
ment

maj F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

card Power
Failure Trap

Event Source
(IMO Name)

card
Power
Failure
Trap

Event
Type

Expedites
Polling

card Power
Failure Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

nChg
Trap
pcmEnabledMo
dule Removed
Trap

pcmEnab pcmEnabledM
ledModu odule
Removed Trap
le
Removed
Trap

module Temp
Exceeded Trap

module
Temp
Exceede
d Trap

module Temp N
Exceeded Trap

IManagedEle F
ment

info F

pcmEnabledMo
duleRestarted
Trap

pcmEnab pcmEnabledM N
ledModu oduleRestarted
leRestart Trap
ed Trap

IManagedEle F
ment

maj F

pcmEnabledMo
dule Shutdown
Trap

pcmEnab pcmEnabledM N
ledModu odule
Shutdown Trap
le
Shutdow
n Trap

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-400

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

maj F

pcmPortAdmin N
Chg Trap

IManagedEle F
ment

info F

IManagedEle F
ment

info F

Is Ticketable

Weight

Severity

Is Correlation
Allowed

Activate
Flow

IManagedEle F
ment

pcmEnabledMo pcmEnab pcmEnabledM


duleFpgaUpgrad ledModu oduleFpgaUpg
e Trap
leFpgaU rade Trap

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

pgrade
Trap
pcm Port Admin
Change Trap

pcmPort
AdminC
hg Trap

pcm Port Offline pcm Port pcm Port


Trap
Offline
Offline Trap

Trap
pcm Port Online
Trap

pcm Port pcm Port


Offline
Online Trap
Trap

IManagedEle F
ment

pcm port failed


trap

pcm Port pcm Port


N
Failed
Failed/Recover
Trap
y

IManagedEle F
ment

maj F

pcm Port LOS


Alarm On

pcm Port pcm Port LOS


LOS
Alarm off/on
Trap

IManagedEle F
ment

maj F

pcm Port NBET


Alarm On

pcm Port pcm Port


NBET Alarm
NBET
Off/On
Alarm
Trap

IManagedEle F
ment

min F

pcm Port FBET


Alarm On

pcm Port pcm Port


FBET Alarm
FBET
Off/On
Alarm
Trap

IManagedEle F
ment

min F

pcm port
loopback added

pcm Port pcm port


N
Lpbk
loopback
Trap
added/removed

IManagedEle F
ment

min F

pcm port
loopback
removed trap

pcm Port pcm Port Lpbk N


Lpbk
Trap
Trap

IManagedEle F
ment

min F

pcmPortXcon
Alm Trap

pcm Port pcmPortXcon


Xcon
Alm On
AlmTrap

IManagedEle F
ment

min F

pcm Port
SfpRmvd Trap

pcm Port pcm Port


SfpRmv SfpRmvd Trap
d Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-401

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

pcm Port
pcm Port pcm Port
EnSfpRmvd Trap EnSfpR EnSfpRmvd

IManagedEle F
ment

info F

Is Ticketable

Auto Clear

Severity

Weight

pcm Port pcm Port


SfpDetd SfpDetd Trap
Trap

Activate
Flow

IManagedEle F
ment

Event
Subtype

Event
Type

Event Source
(IMO Name)

Expedites
Polling

Is Correlation
Allowed

pcm Port
SfpDetd Trap

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

mvd
Trap

Trap

if AdminChg
Trap

if
AdminC
hg Trap

if AdminChg
Trap

IManagedEle F
ment

info F

if AdminChg
Trap

if
AdminC
hg Trap

if AdminChg
Trap

IManagedEle F
ment

info F

if AdminChg
Trap

if
AdminC
hg Trap

if AdminChg
Trap

IManagedEle F
ment

info F

if CacOvSub
Trap

if
CacOvS
ub Trap

if CacOvSub
Trap

IManagedEle F
ment

info F

If Offline Trap

If Offline If Offline Trap


Trap

IIPInterface

info F

If Online Trap

If Offline If Online Trap


Trap

IIPInterface

eva Event Clear


Trap

eva
Event
Clear
Trap

eva Event
Clear Trap

IManagedEle F
ment

eva Excess
Minor Trap

eva
Excess
Minor
Trap

eva Excess
Minor Trap

IManagedEle F
ment

maj F

eva Excess
Major Trap

eva
Excess
Major
Trap

eva Excess
Major Trap

IManagedEle F
ment

criti F
cal

ospfGlblClr
Process Trap

ospfGlbl
Clr
Process
Trap

ospfGlblClr
Process Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-402

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

ospf Inst Oper


Down

IManagedEle F
ment

info F

ospf Ext Lsa High ospfExtL ospfExtLsaHig N


Thresh Trap
saHighT hThresh Trap

IManagedEle F
ment

info F

IManagedEle F
ment

info F

ospf Ex Max Lsa ospfExM ospfExMaxLsa N


Exceeded Trap axLsaEx Exceeded Trap

IManagedEle F
ment

info F

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

ospf Inst Oper Up ospf Inst


Trap
Oper

Event Source
(IMO Name)

Event
Type

Expedites
Polling

ospf Inst Oper


Up

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Down
Trap
ospf Inst Oper
Down Trap

ospf Inst
Oper
Down
Trap

hresh
Trap
ospf Ext Lsa Low ospfExtL ospfExtLsaLo
Thresh Trap
saLowTh wThresh Trap

resh Trap

ceeded
Trap
ospf Ext Redis
Route High
Thresh Trap

ospfExtR ospfExtRedisR N
edisRout outeHighThres
eHighTh h Trap
resh Trap

ospf Ext If State


Change Trap

ospfExtI
fStateCh
g Trap

IManagedEle F
ment

info F

ospf Ext Nbr


State Change
Trap

ospfExt ospfExtNbrSta N
NbrState teChg Trap
Chg Trap

IManagedEle F
ment

info F

mplsLsp Admin
Change Trap

mplsLsp
Admin
Change
Trap

mplsLsp
N
Admin Change
Trap

IManagedEle F
ment

info F

mplsLsp Up

IManagedEle F
ment

mplsLsp Down N

IManagedEle F
ment

info F

mplsLsp Up Trap mplsLsp

ospfExtIfState
Chg Trap

Down
Trap
mplsLsp Down
Trap

mplsLsp
Down
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-403

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

mpls Tunnel Up
Trap

mpls
Tunnel
Down
Trap

mpls Tunnel
Up

IManagedEle F
ment

mpls Tunnel
Down Trap

mpls
Tunnel
Down
Trap

mpls Tunnel
Down

IManagedEle F
ment

info F

snmp Link
Down

IManagedEle F
ment

maj F

snmp Link Up

IManagedEle F
ment

mplsLdp
Session Up

IManagedEle F
ment

mplsLdp
Session Down

IManagedEle F
ment

info F

mplsLdp
Interface
Online

IManagedEle F
ment

mplsLdp
Interface
Offline

IManagedEle F
ment

info F

temAreaAdmi
nChange Trap

IManagedEle F
ment

info F

IManagedEle F
ment

snmp Link Down snmp


Trap
Link

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

mplsLsp
Active Trap

Event
Type

Event Source
(IMO Name)

mplsLsp
Active
Trap

Expedites
Polling

mplsLsp Active
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Down
Trap
snmp Link Up
Trap

snmp
Link
Down
Trap

mplsLdp Session mplsLdp


Up Trap
Session

Down
Trap
mplsLdp Session mplsLdp
Down Trap
Session

Down
Trap
mplsLdp
mplsLdp
Interface Online Interface
Trap
Offline

Trap
mplsLdp
mplsLdp
Interface Offline Interface
Trap
Offline

Trap
temAreaAdminC temArea
hange Trap
AdminC

hange
Trap
temOspf If
Online Trap

temOspf temOspf If
If Offline Online
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-404

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

mpls Admin
State Trap

IManagedEle F
ment

info F

mplsRsv
pIntf
Admin
State
Trap

mplsRsvpIntf
Admin State
Trap

IManagedEle F
ment

info F

mplsRsvpIntf
Online Trap

mplsRsv
pIntf
Offline
Trap

mplsRsvpIntf
Online

IManagedEle F
ment

mplsRsvpIntf
Offline Trap

mplsRsv
pIntf
Offline
Trap

mplsRsvpIntf
Offline

IManagedEle F
ment

info F

bfd Session Up
Trap

bfd
Session
Down
Trap

bfd Session Up N

IManagedEle F
ment

bfd Session
Down Trap

bfd
Session
Down
Trap

bfd Session
Down

IManagedEle F
ment

info F

Non Redundant
trap

Non
Non
N
Redunda Redundant trap
nt trap

IManagedEle F
ment

criti F
cal

tellabs ospf if
state down

tellabs
ospf if
state
down

tellabs ospf if
state down

IIPInterface

info F

tellabs ospf if
state up

tellabs
ospf if
state up

tellabs ospf if
state up

IIPInterface

clr

Event
Subtype

mpls Admin
State Trap

mpls
Admin
State
Trap

mplsRsvpIntf
Admin State
Trap

Is Ticketable

Auto Clear

Severity

Weight

temOspf temOspf If
If Offline Offline
Trap

Activate
Flow

temOspf If
Offline Trap

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-405

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

tellabs ospf
neighbor state
down

tellabs ospf
tellabs
neighbor state
ospf
neighbor down
state
down

IIPInterface

maj F

tellabs ospf
neighbor state
up

tellabs ospf
tellabs
neighbor state
ospf
neighbor up
state up

IIPInterface

clr

IOspfEntry

min T

IOspfEntry

clr

IIPInterface

wrn T

IManagedEle F
ment

min F

IIPInterface

wrn T

IManagedEle F
ment

wrn T

Event
Subtype

tellabs
tellabs
ospf-virtual-neig ospf-virt
hbor-state-down ual-neig

N
tellabs
ospf-virtual-ne
ighbor-state-do
hbor-stat wn
e-down

tellabs
tellabs
ospf-virtual-neig ospf-virt
hbor-state-up
ual-neig

tellabs
N
ospf-virtual-ne
ighbor-state-up

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

tellabs ospf
virtual if state
down

Event Source
(IMO Name)

tellabs
ospf
virtual if
state
down

Event
Type

Expedites
Polling

tellabs ospf
virtual if state
down

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

hbor-stat
e-up
tellabs
tellabs
ospf-if-config-er ospf-if-c
r
onfig-err

tellabs
ospf-if-configerr

tellabs
ospf-virtual-if-c
onfig-err

tellabs
N
ospf-virtual-ifconfig-err

tellabs
ospf-virt
ual-if-co
nfig-err

tellabs
tellabs
N
tellabs
ospf-if-authentic ospf-if-a ospf-if-authent
-fail
uthentic- ic-fail

fail
tellabs
ospf-virtual-if-a
uthentic-fail

tellabs
N
tellabs
ospf-virt ospf-virtual-ifual-if-aut authentic-fail
hentic-fa
il

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-406

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min F

IManagedEle F
ment

min F

IIPInterface

min F

N
tellabs
ospf-virtual-ifpacket-retrans
mit

IManagedEle F
ment

min F

tellabs
tellabs
N
tellabs
ospf-new-lsa-or ospf-new ospf-new-lsa-o
iginated
-lsa-origi riginated

IManagedEle F
ment

min F

IManagedEle F
ment

info F

IIPInterface

Event
Subtype

Is Ticketable

Weight
0

Severity

Is Correlation
Allowed
F

tellabs
tellabs
tellabs
ospf-if-bad-pack ospf-if-b ospf-if-bad-pa
et
ad-packe cket

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Short
Description

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Activate
Flow

Table 10-54

t
tellabs
ospf-virtual-if-b
ad-packet

tellabs
ospf-virt
ual-if-ba
d-packet

tellabs
ospf-if-packet-r
etransmit

tellabs
N
tellabs
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

tellabs
tellabs
ospf-virtual-if-p ospf-virt
acket-retransmit ual-if-pa

cket-retr
ansmit

tellabs
N
ospf-virtual-ifbad-packet

nated
tellabs
ospf-lsa-reache
d-maxage

tellabs
N
tellabs
ospf-lsa- ospf-lsa-reache
reached- d-maxage
maxage

tellabs bgp
down trap

tellabs
ospf if
state
down

tellabs ospf if
state down

IBgpNeighbo F
urEntry

maj F

tellabs bgp
tellabs
established trap ospf if

tellabs ospf if
state up

IBgpNeighbo F
urEntry

clr

tellabs ospf
virtual if state
down

IManagedEle F
ment

info F

tellabs ospf
neighbor state
down

IManagedEle F
ment

wrn F

state up
tellabs new root tellabs
trap
ospf

virtual if
state
down
tellabs Spanning tellabs
Tree Topology
ospf
Changed
neighbor

state
down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-407

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

tellabs
ospf-virt
ual-neig
hbor-stat
e-down

N
tellabs
ospf-virtual-ne
ighbor-state-do
wn

IManagedEle F
ment

info F

tellabs
tellabs
acctngFileNearl ospf-virt
yFull trap
ual-neig

tellabs
N
ospf-virtual-ne
ighbor-state-up

IManagedEle F
ment

info F

Event
Subtype

tellabs
acctngFileFull
trap

Is Ticketable

Auto Clear

Severity

Weight

tellabs ospf
tellabs
neighbor state
ospf
neighbor up
state up

Activate
Flow

tellabs Entity
table
configuration
changed

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

hbor-stat
e-up
tellabs dsx1 line tellabs
status change
ospf-if-c

IIPInterface

maj F

tellabs dsx3 line tellabs


status change
ospf-virt

tellabs
N
ospf-virtual-ifconfig-err

IIPInterface

maj F

tellabs
N
tellabs
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IIPInterface

maj F

IManagedEle F
ment

min F

IManagedEle F
ment

info F

tellabs
ospf-if-configonfig-err err

ual-if-co
nfig-err
tellabs fr dlci
status invalid
trap

tellabs
tellabs
N
tellabs
ipv6-if-state-cha ospf-virt ospf-virtual-ifnged
ual-if-aut authentic-fail

hentic-fa
il
tellabs
mfrMibTrapBun
dleLinkMismatc
h trap

tellabs
tellabs
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

tellabs
mplsLdpInitSesT
hresholdExceed
ed trap

tellabs
ospf-virt
ual-if-ba
d-packet

tellabs
N
ospf-virtual-ifbad-packet

IManagedEle F
ment

info F

tellabs
mplsLdpPathVec
torLimitMismatc
h trap

tellabs
N
tellabs
ospf-if-p ospf-if-packetacket-ret retransmit
ransmit

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-408

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

tellabs
tellabs
tellabs
N
mplsLdpSession ospf-new ospf-new-lsa-o
Up trap
-lsa-origi riginated

IManagedEle F
ment

info F

tellabs
N
ospf-lsa-reache
d-maxage

IManagedEle F
ment

maj F

tellabs ospf if
state down

IManagedEle F
ment

info F

cket-retr
ansmit

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

tellabs
tellabs
mplsLdpSession ospf-virt
Down trap
ual-if-pa

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling

N
tellabs
ospf-virtual-ifpacket-retrans
mit

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

nated
tellabs mpls te
tellabs
tunnel down trap ospf-lsa-

reachedmaxage
tellabs mpls te
tellabs
tunnel
ospf if
reoptimized trap state

down
tellabs mpls te
tunnel rerouted
trap

tellabs
ospf if
state up

tellabs ospf if
state up

IManagedEle F
ment

info F

tellabs mpls te
tunnel up trap

tellabs
ospf
virtual if
state
down

tellabs ospf
virtual if state
down

IManagedEle F
ment

info F

tellabs
tellabs
pingProbeFailed ospf
trap
neighbor

tellabs ospf
neighbor state
down

IManagedEle F
ment

info F

tellabs ospf
neighbor state
up

IManagedEle F
ment

info F

N
tellabs
ospf-virtual-ne
ighbor-state-do
wn

IManagedEle F
ment

info F

state
down
tellabs
tellabs
pingTestComple ospf
ted trap
neighbor

state up
tellabs
pingTestFailed
trap

tellabs
ospf-virt
ual-neig
hbor-stat
e-down

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-409

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

tellabs
RMON_Packet_
Match trap

tellabs
tellabs
ospf-if-c ospf-if-configonfig-err err

IManagedEle F
ment

info F

tellabs
RMON_Rise_Al
arm trap

tellabs
ospf-virt
ual-if-co
nfig-err

tellabs
N
ospf-virtual-ifconfig-err

IManagedEle F
ment

info F

tellabs
rptrGroupChang
e trap

tellabs
N
tellabs
ospf-if-a ospf-if-authent
uthentic- ic-fail
fail

IManagedEle F
ment

info F

tellabs
rptrHealth trap

tellabs
N
tellabs
ospf-virt ospf-virtual-ifual-if-aut authentic-fail
hentic-fa
il

IManagedEle F
ment

info F

tellabs
rptrResetEvent
trap

tellabs
tellabs
ospf-if-b ospf-if-bad-pa
ad-packe cket
t

IManagedEle F
ment

wrn F

tellabs
traceRoutePath
Change trap

tellabs
ospf-virt
ual-if-ba
d-packet

tellabs
N
ospf-virtual-ifbad-packet

IManagedEle F
ment

info F

tellabs
tellabs
traceRouteTestC ospf-if-p
ompleted trap
acket-ret

tellabs
N
ospf-if-packetretransmit

IManagedEle F
ment

info F

N
tellabs
ospf-virtual-ifpacket-retrans
mit

IManagedEle F
ment

info F

tellabs
N
tellabs
ospf-new ospf-new-lsa-o
-lsa-origi riginated
nated

IManagedEle F
ment

info F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

tellabs
N
tellabs
ospf-virt ospf-virtual-ne
ual-neig ighbor-state-up
hbor-stat
e-up

Event
Type

Expedites
Polling

tellabs
RMON_Falling_
Alarm trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ransmit
tellabs
tellabs
traceRouteTestF ospf-virt
ailed trap
ual-if-pa

cket-retr
ansmit
tellabs vrrp trap
auth failure trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-410

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

min F

reachedmaxage
ip Route
Added
Trap

ip Route
Added Trap

IManagedEle F
ment

wrn F

ip Route Deleted ip Route


Trap
Deleted

ip Route
Deleted Trap

IManagedEle F
ment

wrn F

Is Ticketable

Weight
0

Severity

Is Correlation
Allowed
F

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

tellabs
N
ospf-lsa-reache
d-maxage

Event
Type

tellabs vrrp trap tellabs


new master trap ospf-lsa-

ip Route Added
Trap

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Trap
ip Route Cost
Added Trap

ip Route
Cost
Added
Trap

ip Route Cost
Added Trap

IManagedEle F
ment

wrn F

ip Route Cost
Deleted Trap

ip Route
Cost
Deleted
Trap

ip Route Cost
Deleted Trap

IManagedEle F
ment

wrn F

ip Route Cost
ip Route ip Route Cost
Attr Change Trap Cost Attr Attr Change

IManagedEle F
ment

wrn F

Change
Trap

Trap

ip Route Path
Added Trap

ip Route
Path
Added
Trap

ip Route Path
Added Trap

IManagedEle F
ment

wrn F

ip Route Path
Deleted Trap

ip Route
Path
Deleted
Trap

ip Route Path
Deleted Trap

IManagedEle F
ment

wrn F

ip Route Path
Active Trap

ip Route
Path
Active
Trap

ip Route Path
Active Trap

IManagedEle F
ment

info F

ip Route Path
Inactive Trap

ip Route
Path
Inactive
Trap

ip Route Path
Inactive Trap

IManagedEle F
ment

min F

ip Route Active
Trap

ip Route
Active
Trap

ip Route
Active Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-411

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

ip Route
Inactive Trap

Expedites
Polling

Is Correlation
Allowed

ip Route Inactive ip Route


Trap
Inactive

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

Trap
ip Route Attr
Change Trap

ip Route
Attr
Change
Trap

ip Route Attr
Change Trap

IManagedEle F
ment

wrn F

ip Route Bulk
Change Trap

ip Route
Bulk
Change
Trap

ip Route Bulk
Change Trap

IManagedEle F
ment

wrn F

Syn Rate Thr


Trap

Syn Rate Syn Rate Thr


Thr Trap Trap

IManagedEle F
ment

maj F

Hlf Open Thr


Trap

Hlf Open Hlf Open Thr


Thr Trap Trap

IManagedEle F
ment

maj F

Path Chg Trap

Path Chg Path Chg Trap


Trap

IManagedEle F
ment

wrn F

bgp Established
Trap

bgp
bgp
Establish Established
ed Trap Trap

IManagedEle F
ment

info F

bgp MaxPfx
MaxThreshold
Trap

bgp MaxPfx
bgp
MaxPfx MaxThreshold
MaxThre Trap
shold
Trap

IManagedEle F
ment

wrn F

bgp MaxPfx
ExceedAction
Trap

bgp MaxPfx
bgp
MaxPfx ExceedAction
ExceedA Trap
ction
Trap

IManagedEle F
ment

wrn F

bgp Glbl Admin


Chg Trap

bgp Glbl bgp Glbl


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

info F

bgp Glbl Admin


Chg Trap

bgp Glbl bgp Glbl


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

bgp Glbl Admin


Chg Trap

bgp Glbl bgp Glbl


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-412

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

bgp Peer Add


Trap

bgp Peer bgp Peer Add


Add Trap Trap

IManagedEle F
ment

wrn F

bgp Peer Del


Trap

bgp Peer bgp Peer Del


Del Trap Trap

IManagedEle F
ment

wrn F

bgp Peer Attr


ChgDb Change
Trap

N
bgp Peer bgp Peer Attr
ChgDb Change
Attr
Trap
ChgDb
Change
Trap

IManagedEle F
ment

wrn F

bgp PeerGp Add bgp


Trap
PeerGp

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

N
bgp Glbl bgp Glbl Attr
ChgDb Change
Attr
Trap
ChgDb
Change
Trap

Event
Type

Expedites
Polling

bgp Glbl Attr


ChgDb Change
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

bgp PeerGp
Add Trap

IManagedEle F
ment

wrn F

bgp PeerGp Del


Trap

bgp
bgp PeerGp
PeerGp
Del Trap
Del Trap

IManagedEle F
ment

wrn F

bgp PeerGp Attr


ChgDb Change
Trap

bgp
PeerGp
Attr
ChgDb
Change
Trap

IManagedEle F
ment

wrn F

bgp Netwk Add


Trap

bgp
bgp Netwk
Netwk
Add Trap
Add Trap

IManagedEle F
ment

wrn F

bgp Netwk Del


Trap

bgp
bgp Netwk Del N
Netwk
Trap
Del Trap

IManagedEle F
ment

wrn F

bgp Netwk Attr


ChgDb Change
Trap

bgp
Netwk
Attr
ChgDb
Change
Trap

bgp Netwk Attr N


ChgDb Change
Trap

IManagedEle F
ment

wrn F

bgp Aggr Add


Trap

bgp Aggr bgp Aggr Add


Add Trap Trap

IManagedEle F
ment

wrn F

Add Trap

bgp PeerGp
Attr ChgDb
Change Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-413

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

bgp Aggr Attr


ChgDb Change
Trap

bgp Aggr bgp Aggr Attr N


ChgDb Change
Attr
Trap
ChgDb
Change
Trap

IManagedEle F
ment

wrn F

bgp Redist Add


Trap

bgp
bgp Redist Add N
Redist
Trap
Add Trap

IManagedEle F
ment

wrn F

bgp Redist Del


Trap

bgp
bgp Redist Del N
Redist
Trap
Del Trap

IManagedEle F
ment

wrn F

bgp Redist Attr


ChgDb Change
Trap

bgp
Redist
Attr
ChgDb
Change
Trap

bgp Redist Attr N


ChgDb Change
Trap

IManagedEle F
ment

wrn F

bgp ASpath List


Add Trap

bgp ASpath
bgp
List Add Trap
ASpath
List Add
Trap

IManagedEle F
ment

wrn F

bgp ASpath List


Del Trap

bgp
ASpath
List Del
Trap

bgp ASpath
List Del Trap

IManagedEle F
ment

wrn F

bgp ASpath List


Attr ChgDb
Change Trap

bgp
ASpath
List Attr
ChgDb
Change
Trap

N
bgp ASpath
List Attr
ChgDb Change
Trap

IManagedEle F
ment

wrn F

bgp Comm List


Add Trap

bgp Comm List N


bgp
Add Trap
Comm
List Add
Trap

IManagedEle F
ment

wrn F

bgp Comm List


Del Trap

bgp
Comm
List Del
Trap

bgp Comm List N


Del Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

bgp Aggr bgp Aggr Del


Del Trap Trap

Event
Type

Expedites
Polling

bgp Aggr Del


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-414

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

bgp Max Pfx


N
Min Threshold
Threshol Trap
d Trap

IManagedEle F
ment

info F

bgp Max Pfx


Exceed Clear
Trap

bgp Max bgp Max Pfx


Exceed Clear
Pfx
Trap
Exceed
Clear
Trap

IManagedEle F
ment

info F

bgp ExtCL Add


Trap

bgp
bgp ExtCL
ExtCL
Add Trap
Add Trap

IManagedEle F
ment

wrn F

bgp ExtCL Del


Trap

bgp
bgp ExtCL Del N
ExtCL
Trap
Del Trap

IManagedEle F
ment

wrn F

bgp ExtCL Attr


ChgDb Change
Trap

bgp
ExtCL
Attr
ChgDb
Change
Trap

bgp ExtCL Attr N


ChgDb Change
Trap

IManagedEle F
ment

wrn F

bgp Inst Oper


Up Trap

IManagedEle F
ment

info F

Event
Subtype

bgp Max Pfx Min bgp Max


Threshold Trap Pfx Min

bgp Inst Oper Up bgp Inst


Trap
Oper Up

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

bgp
Comm
List Attr
ChgDb
Change
Trap

Event Source
(IMO Name)

IManagedEle F
ment

bgp Comm List


Attr ChgDb
Change Trap

Event
Type

Expedites
Polling

bgp Comm List N


Attr ChgDb
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
bgp Inst Oper
Down Trap

bgp Inst
Oper
Down
Trap

bgp Inst Oper


Down Trap

IManagedEle F
ment

min F

bgp Inst RtrId


Chg Trap

bgp Inst bgp Inst RtrId


RtrId
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

bgp Peer Admin


Chg Trap

bgp Peer bgp Peer


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-415

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

bgp Peer Admin


Chg Trap

bgp Peer bgp Peer


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

bgp Peer Gp
Admin Chg Trap

bgp Peer bgp Peer Gp


Admin Chg
Gp
Trap
Admin
Chg Trap

IManagedEle F
ment

info F

bgp Peer Gp
Admin Chg Trap

bgp Peer bgp Peer Gp


Admin Chg
Gp
Trap
Admin
Chg Trap

IManagedEle F
ment

wrn F

bgp Peer Gp
Admin Chg Trap

bgp Peer bgp Peer Gp


Admin Chg
Gp
Trap
Admin
Chg Trap

IManagedEle F
ment

wrn F

bgp Peer Estab


Trap

bgp Peer bgp Peer Estab N


Estab
Trap
Trap

IManagedEle F
ment

info F

bgp Peer Down


Trap

bgp Peer bgp Peer Down N


Down
Trap
Trap

IManagedEle F
ment

min F

bgp Proc Attr


Chg Trap

bgp Proc bgp Proc Attr


Attr Chg Chg Trap
Trap

IManagedEle F
ment

wrn F

bgp ProcGRSt
Chg Trap

bgp ProcGRSt
bgp
ProcGRS Chg Trap
t Chg
Trap

IManagedEle F
ment

wrn F

bgp Peer
InRestart Trap

bgp Peer bgp Peer


InRestart InRestart Trap
Trap

IManagedEle F
ment

wrn F

bgp Peer
OutOfRestart
Trap

bgp Peer bgp Peer


OutOfRe OutOfRestart
Trap
start
Trap

IManagedEle F
ment

info F

IManagedEle F
ment

wrn F

ospf If State Chg ospf If


Trap
State

Event
Subtype
ospf If State
Chg Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

bgp Peer bgp Peer


Admin
Admin Chg
Chg Trap Trap

Event
Type

Expedites
Polling

bgp Peer Admin


Chg Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Chg Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-416

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

ospf Nbr State


Chg Trap

ospf Nbr ospf Nbr State


State
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

ospf VNbr State


Chg Trap

ospf VNbr
N
ospf
State Chg Trap
VNbr
State
Chg Trap

IManagedEle F
ment

wrn F

ospf If Conf Err


Trap

ospf If
ospf If Conf
Conf Err Err Trap
Trap

IManagedEle F
ment

wrn F

ospf VIf Conf Err


Trap

ospf VIf ospf VIf Conf


Conf Err Err Trap
Trap

IManagedEle F
ment

wrn F

ospf If Auth Fail


Trap

ospf If
ospf If Auth
Auth Fail Fail Trap
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

ospf VIf Auth Fail ospf VIf ospf VIf Auth


Trap
Auth Fail Fail Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

ospf VIf ospf VIf State


State
Chg Trap
Chg Trap

Event
Type

Expedites
Polling

ospf VIf State


Chg Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
ospf Orig Lsa
Trap

ospf Orig ospf Orig Lsa


Lsa Trap Trap

IManagedEle F
ment

wrn F

ospf Max Age


Lsa Trap

ospf Max ospf Max Age


Age Lsa Lsa Trap
Trap

IManagedEle F
ment

wrn F

ospf Glbl Attr


Change Trap

ospf Glbl ospf Glbl Attr


Change Trap
Attr
Change
Trap

IManagedEle F
ment

wrn F

ospf Glbl Clr


Counters Trap

ospf Glbl ospf Glbl Clr


Counters Trap
Clr
Counters
Trap

IManagedEle F
ment

wrn F

ospf Area Attr


Change Trap

ospf Area Attr


ospf
Area Attr Change Trap
Change
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-417

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

ospf Area Del


Trap

ospf
ospf Area Del
Area Del Trap
Trap

IManagedEle F
ment

wrn F

ospf If Attr
Change Trap

ospf If
Attr
Change
Trap

IManagedEle F
ment

wrn F

ospf Redist Add


Trap

ospf
ospf Redist
Redist
Add Trap
Add Trap

IManagedEle F
ment

wrn F

ospf Redist Del


Trap

ospf
ospf Redist Del N
Redist
Trap
Del Trap

IManagedEle F
ment

wrn F

ospf Nwk Add


Trap

ospf
ospf Nwk Add
Nwk
Trap
Add Trap

IManagedEle F
ment

wrn F

ospf Nwk Del


Trap

ospf
ospf Nwk Del
Nwk Del Trap
Trap

IManagedEle F
ment

wrn F

ospf VIf Add Trap ospf VIf

IManagedEle F
ment

wrn F

ospf VIf Del Trap ospf VIf

ospf VIf Del


Del Trap Trap

IManagedEle F
ment

wrn F

ospf VIf Attr


Change Trap

IManagedEle F
ment

wrn F

Event
Subtype
ospf If Attr
Change Trap

ospf VIf Add


Add Trap Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

ospf
ospf Area Add
Area
Trap
Add Trap

Event
Type

Expedites
Polling

ospf Area Add


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ospf VIf Attr


Change Trap

ospf VIf
Attr
Change
Trap

ospf Glbl Admin


Chg Trap

ospf Glbl ospf Glbl


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

ospf Over load


State Chg Trap

ospf Over load N


ospf
State Chg Trap
Over
load
State
Chg Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-418

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

ospf Ext Area


Nssa Tr State
ChgTrap

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

ospf Ext Area


Nssa Tr Role
Chg Trap

Event Source
(IMO Name)

Is Correlation
Allowed

ospf Ext Area


ospf Ext
Nssa Tr Role Chg Area
Trap
Nssa Tr

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Role Chg
Trap
ospf Ext Area
Nssa Tr State
ChgTrap

ospf Ext
Area
Nssa Tr
State
ChgTrap

IManagedEle F
ment

wrn F

ospf Ext Area


Aggr Add Trap

ospf Ext ospf Ext Area N


Aggr Add Trap
Area
Aggr
Add Trap

IManagedEle F
ment

wrn F

ospf Ext Area


Aggr Del Trap

ospf Ext ospf Ext Area


Aggr Del Trap
Area
Aggr Del
Trap

IManagedEle F
ment

wrn F

ospf Ext Area


Aggr Attr Chg
Trap

ospf Ext ospf Ext Area


Aggr Attr Chg
Area
Trap
Aggr
Attr Chg
Trap

IManagedEle F
ment

wrn F

ospf Ex Max
Lsa Cleared
Trap

IManagedEle F
ment

info F

ospf Ex Max Lsa ospf Ex


Cleared Trap
Max Lsa

Cleared
Trap
ospf Ext Redis
Route High
Thresh Trap

ospf Ext
Redis
Route
High
Thresh
Trap

ospf Ext Redis


Route High
Thresh Trap

IManagedEle F
ment

info F

ospf Ex Max
Redis Route
Exceeded Trap

ospf Ex
Max
Redis
Route
Exceede
d Trap

ospf Ex Max
N
Redis Route
Exceeded Trap

IManagedEle F
ment

min F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-419

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

ospf Ext VIf State ospf Ext ospf Ext VIf


N
Chg Trap
VIf State State Chg Trap

IManagedEle F
ment

min F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

ospf Ex Max
Redis Route
Cleared Trap

Activate
Flow

ospf Ex
Max
Redis
Route
Cleared
Trap

Event Source
(IMO Name)

IManagedEle F
ment

ospf Ex Max
Redis Route
Cleared Trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Chg Trap
ospf Ext VNbr
State Chg Trap

ospf Ext ospf Ext VNbr N


State Chg Trap
VNbr
State
Chg Trap

IManagedEle F
ment

min F

ospf Ext If Conf


Err Trap

ospf Ext
If Conf
Err Trap

ospf Ext If
Conf Err Trap

IManagedEle F
ment

wrn F

ospf Ext VIf Conf ospf Ext ospf Ext VIf


Err Trap
VIf Conf Conf Err Trap

IManagedEle F
ment

wrn F

ospf Ext ospf Ext If


If Auth
Auth Fail Trap
Fail Trap

IManagedEle F
ment

wrn F

ospf Ext VIf Auth ospf Ext ospf Ext VIf


Fail Trap
VIf Auth Auth Fail Trap

IManagedEle F
ment

wrn F

Err Trap
ospf Ext If Auth
Fail Trap

Fail Trap
ospf Ext Nbr Dn
Reason Trap

ospf Ext
Nbr Dn
Reason
Trap

IManagedEle F
ment

wrn F

Os ExNbr GrR
Trap

Os
Os ExNbr GrR N
ExNbr
Trap
GrR Trap

IManagedEle F
ment

wrn F

Os ExNbr GrD
Trap

Os
ExNbr
GrD
Trap

Os ExNbr GrD N
Trap

IManagedEle F
ment

wrn F

Os ExVNb GrR
Trap

Os
Os ExVNb
ExVNb
GrR Trap
GrR Trap

IManagedEle F
ment

wrn F

ospf Ext Nbr


Dn Reason
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-420

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

ospf Area Dup


Rtr Id Trap

ospf
Area
Dup Rtr
Id Trap

ospf Area Dup


Rtr Id Trap

IManagedEle F
ment

maj F

mpls Ldp Intf


Add Trap

mpls Ldp mpls Ldp Intf


Intf Add Add Trap
Trap

IManagedEle F
ment

wrn F

mpls Ldp Intf Del mpls Ldp mpls Ldp Intf


Trap
Intf Del Del Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

Os ExVNb
GrD Trap

Event
Type

Event Source
(IMO Name)

Os
ExVNb
GrD
Trap

Expedites
Polling

Os ExVNb GrD
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
mpls Ldp Intf
mpls Ldp mpls Ldp Intf
Admn State Trap Intf
Admn State

Admn
State
Trap

Trap

mpls Ldp Intf Attr mpls Ldp mpls Ldp Intf


Chg Trap
Intf Attr Attr Chg Trap

Chg Trap
mpls Ldp Glbl
Attr Chg Trap

mpls Ldp mpls Ldp Glbl


Glbl Attr Attr Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

mpls Ldp Auth


Del Trap

mpls Ldp mpls Ldp Auth N


Auth Del Del Trap
Trap

IManagedEle F
ment

wrn F

mpls Ldp Auth


Change Trap

mpls Ldp mpls Ldp Auth N


Change Trap
Auth
Change
Trap

IManagedEle F
ment

wrn F

mpls Ldp Auth


Add Trap

mpls Ldp mpls Ldp Auth N


Auth
Add Trap
Add Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

mpls Ldp Peer


mpls Ldp mpls Ldp Peer
Attr Change Trap Peer Attr Attr Change

Change
Trap
Ldp FB Add Trap Ldp FB

Trap

Ldp FB Add
Add Trap Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-421

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ldp FB Adm Ch
Trap

Ldp FB
Adm Ch
Trap

Ldp FB Adm
Ch Trap

IManagedEle F
ment

wrn F

Ldp FB Del Trap

Ldp FB Ldp FB Del


Del Trap Trap

IManagedEle F
ment

wrn F

atm Admin
State Trap

IManagedEle F
ment

info F

atm Admin
State Trap

IManagedEle F
ment

wrn F

atm Admin
State Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

atm Admin State atm


Trap
Admin

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Ldp FB Att Ch N
Trap

Event Source
(IMO Name)

Ldp FB
Att Ch
Trap

Event
Type

Expedites
Polling

Ldp FB Att Ch
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

State
Trap
atm Admin State atm
Trap
Admin

State
Trap
atm Admin State atm
Trap
Admin

State
Trap
atm Global
Changed Db
Change Trap

atm Global
atm
Changed Db
Global
Changed Change Trap
Db
Change
Trap

pnni Admin
State Trap

pnni
Admin
State
Trap

pnni Admin
State Trap

IManagedEle F
ment

info F

pnni Admin
State Trap

pnni
Admin
State
Trap

pnni Admin
State Trap

IManagedEle F
ment

wrn F

pnni Admin
State Trap

pnni
Admin
State
Trap

pnni Admin
State Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-422

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

atm Pnni Node


Add Trap

atm Pnni atm Pnni Node N


Node
Add Trap
Add Trap

IManagedEle F
ment

wrn F

atm Pnni Node


Del Trap

atm Pnni atm Pnni Node N


Node
Del Trap
Del Trap

IManagedEle F
ment

wrn F

atm Pnni Node


Admin Change
Trap

atm Pnni atm Pnni Node N


Admin Change
Node
Trap
Admin
Change
Trap

IManagedEle F
ment

info F

atm Pnni Node


Admin Change
Trap

atm Pnni atm Pnni Node N


Admin Change
Node
Trap
Admin
Change
Trap

IManagedEle F
ment

wrn F

atm Pnni Node


Admin Change
Trap

atm Pnni atm Pnni Node N


Admin Change
Node
Trap
Admin
Change
Trap

IManagedEle F
ment

wrn F

atm Pnni Node


Pgl Attr Change
Db Change Trap

atm Pnni
Node Pgl
Attr
Change
Db
Change
Trap

atm Pnni Node N


Pgl Attr
Change Db
Change Trap

IManagedEle F
ment

wrn F

atm Pnni Node


Timer Attr
Change Db
Change Trap

atm Pnni
Node
Timer
Attr
Change
Db
Change
Trap

atm Pnni Node N


Timer Attr
Change Db
Change Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

pnni Global
pnni
Changed Db
Global
Changed Change Trap
Db
Change
Trap

Event
Type

Expedites
Polling

pnni Global
Changed Db
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-423

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pnni Intf Online


Trap

pnni Intf
Online
Trap

pnni Intf
Online Trap

IManagedEle F
ment

info F

pnni Intf Offline


Trap

pnni Intf
Offline
Trap

pnni Intf
Offline Trap

IManagedEle F
ment

wrn F

pnni Intf Admin


State Trap

pnni Intf
Admin
State
Trap

pnni Intf
Admin State
Trap

IManagedEle F
ment

info F

pnni Intf Admin


State Trap

pnni Intf
Admin
State
Trap

pnni Intf
Admin State
Trap

IManagedEle F
ment

wrn F

pnni Intf Admin


State Trap

pnni Intf
Admin
State
Trap

pnni Intf
Admin State
Trap

IManagedEle F
ment

wrn F

pnni Intf Attr


ChgDb Change
Trap

pnni Intf
Attr
ChgDb
Change
Trap

pnni Intf Attr


N
ChgDb Change
Trap

IManagedEle F
ment

wrn F

pnni Ilmi Intf


Online Trap

pnni Ilmi pnni Ilmi Intf


Online Trap
Intf
Online
Trap

IManagedEle F
ment

info F

pnni Ilmi Intf


Offline Trap

pnni Ilmi pnni Ilmi Intf


Offline Trap
Intf
Offline
Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

atm Pnni Node N


Svcc Attr
Change Db
Change Trap

Event Source
(IMO Name)

atm Pnni
Node
Svcc Attr
Change
Db
Change
Trap

Event
Type

Expedites
Polling

atm Pnni Node


Svcc Attr
Change Db
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-424

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

pnni Ilmi Intf


Admin State
Trap

pnni Ilmi pnni Ilmi Intf


Admin State
Intf
Trap
Admin
State
Trap

IManagedEle F
ment

wrn F

pnni Ilmi Intf


Admin State
Trap

pnni Ilmi pnni Ilmi Intf


Admin State
Intf
Trap
Admin
State
Trap

IManagedEle F
ment

wrn F

pnni Ilmi Intf Attr pnni Ilmi pnni Ilmi Intf


ChgDb Change
Intf Attr Attr ChgDb
Trap
Change Trap
ChgDb

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

pnni Ilmi pnni Ilmi Intf


Admin State
Intf
Trap
Admin
State
Trap

Event
Type

Expedites
Polling

pnni Ilmi Intf


Admin State
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Change
Trap
pnni SigIntf
Online Trap

pnni
SigIntf
Online
Trap

pnni SigIntf
Online Trap

IManagedEle F
ment

info F

pnni SigIntf
Offline Trap

pnni
SigIntf
Offline
Trap

pnni SigIntf
Offline Trap

IManagedEle F
ment

wrn F

pnni SigIntf
Admin State
Trap

pnni
SigIntf
Admin
State
Trap

pnni SigIntf
Admin State
Trap

IManagedEle F
ment

info F

pnni SigIntf
Admin State
Trap

pnni
SigIntf
Admin
State
Trap

pnni SigIntf
Admin State
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-425

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pnni SigIntf Attr


ChgDb Change
Trap

pnni
SigIntf
Attr
ChgDb
Change
Trap

pnni SigIntf
Attr ChgDb
Change Trap

IManagedEle F
ment

wrn F

atm IfSoft Pvc


Addr Add Trap

atm IfSoft Pvc N


atm
Addr Add Trap
IfSoft
Pvc Addr
Add Trap

IManagedEle F
ment

wrn F

atm IfSoft Pvc


Addr Del Trap

atm IfSoft Pvc


atm
Addr Del Trap
IfSoft
Pvc Addr
Del Trap

IManagedEle F
ment

wrn F

atm Net Prefix


Add Trap

atm Net atm Net Prefix


Prefix
Add Trap
Add Trap

IManagedEle F
ment

wrn F

atm Net Prefix


Del Trap

atm Net atm Net Prefix


Prefix
Del Trap
Del Trap

IManagedEle F
ment

wrn F

atm Svcc Rcc


Down Trap

atm Svcc atm Svcc Rcc


Down Trap
Rcc
Down
Trap

IManagedEle F
ment

wrn F

Conn Trc Trap

Conn Trc Conn Trc Trap


Trap

IManagedEle F
ment

wrn F

Conn Trc1 Trap

Conn
Trc1
Trap

Conn Trc1
Trap

IManagedEle F
ment

wrn F

Conn Trc2 Trap

Conn
Trc2
Trap

Conn Trc2
Trap

IManagedEle F
ment

wrn F

pcm Module
Added Trap

pcm
Module
Added
Trap

pcm Module
Added Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

pnni SigIntf
Admin State
Trap

Event
Type

Event Source
(IMO Name)

pnni
SigIntf
Admin
State
Trap

Expedites
Polling

pnni SigIntf
Admin State
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-426

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

pcm Module
Inserted Trap

IManagedEle F
ment

wrn F

pcm
Module
Restarte
d Trap

pcm Module
Restarted Trap

IManagedEle F
ment

wrn F

pcm
Module
Shutdow
n Trap

pcm Module
N
Shutdown Trap

IManagedEle F
ment

wrn F

pcm Module
Attr Chg Trap

IManagedEle F
ment

wrn F

pcm Module
Removed Trap

pcm Module
pcm
Module Removed Trap
Removed
Trap

pcm Module
Inserted Trap

pcm
Module
Inserted
Trap

pcm Module
Restarted Trap

pcm Module
Shutdown Trap

pcm Module Attr pcm


Chg Trap
Module

Is Ticketable

Weight

pcm Module
Deleted Trap

Severity

Is Correlation
Allowed

pcm
Module
Deleted
Trap

Activate
Flow

IManagedEle F
ment

pcm Module
Deleted Trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Attr Chg
Trap
pcm Module
Fpga Upgrade
Trap

pcm
Module
Fpga
Upgrade
Trap

pcm Module
Fpga Upgrade
Trap

IManagedEle F
ment

wrn F

Mod Fpga Fl
Trap

Mod
Fpga Fl
Trap

Mod Fpga Fl
Trap

IManagedEle F
ment

wrn F

pcm Port Attr


ChgDb Change
Trap

pcm Port pcm Port Attr N


ChgDb Change
Attr
Trap
ChgDb
Change
Trap

IManagedEle F
ment

wrn F

pcm Port LOF


Trap

pcm Port pcm Port LOF


LOF
Trap
Trap

IManagedEle F
ment

maj F

pcm Port AIS


Trap

pcm Port pcm Port AIS


AIS Trap Trap

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-427

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

pcm FeSts Chg


Trap

pcm
pcm FeSts Chg N
FeSts
Trap
Chg Trap

IManagedEle F
ment

wrn F

pcm Port SfpTx


Fault Sts Chg
Trap

N
pcm Port pcm Port
SfpTx Fault Sts
SfpTx
Fault Sts Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

pcm Port
pcm Port pcm Port
Plgable Tx Rmvd Plgable
Plgable Tx
Trap
Tx Rmvd Rmvd Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

pcm Port pcm Port RDI


RDI Trap Trap

Expedites
Polling

pcm Port RDI


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
pcm Port
Plgable Tx Detd
Trap

pcm Port pcm Port


Plgable Tx
Plgable
Tx Detd Detd Trap
Trap

IManagedEle F
ment

wrn F

pcm Port
EnPlgable Tx
Rmvd Trap

pcm Port pcm Port


EnPlgabl EnPlgable Tx
Rmvd Trap
e Tx
Rmvd
Trap

IManagedEle F
ment

min F

pcm Port
Plgable TxTx
Fault Sts Chg
Trap

pcm Port
Plgable
TxTx
Fault Sts
Chg Trap

pcm Port
Plgable TxTx
Fault Sts Chg
Trap

IManagedEle F
ment

wrn F

pcm Port
EnPlgable Tx
Mismatch Trap

N
pcm Port pcm Port
EnPlgabl EnPlgable Tx
Mismatch Trap
e Tx
Mismatc
h Trap

IManagedEle F
ment

min F

IManagedEle F
ment

min F

IManagedEle F
ment

wrn F

IManagedEle F
ment

min F

pcm Port Copper pcm Port pcm Port


Gige AnDisabled Copper
Copper Gige
Trap
AnDisabled
Gige

AnDisab Trap
led Trap
SFB Trap

SFB
Trap

TX Laser DG
Trap

TX Laser TX Laser DG
DG Trap Trap

SFB Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-428

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

card Added
Trap

IManagedEle F
ment

wrn F

Lp Clear Trap

Lp Clear Lp Clear Trap


Trap

card Added Trap card

Added
Trap

Is Ticketable

Weight
F

Lp Detect Trap N

Severity

Is Correlation
Allowed
F

Lp
Detect
Trap

Activate
Flow

Lp Detect Trap

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

card Deleted
Trap

card
Deleted
Trap

card Deleted
Trap

IManagedEle F
ment

wrn F

card Sw Dnld
Done Trap

card Sw
Dnld
Done
Trap

card Sw Dnld
Done Trap

IManagedEle F
ment

wrn F

card Attr
Change Db
Change Trap

IManagedEle F
ment

wrn F

card Attr Change card Attr


Db Change Trap Change

Db
Change
Trap
card Sw Dnld
Init Trap

card Sw card Sw Dnld


Dnld Init Init Trap
Trap

IManagedEle F
ment

wrn F

card Sw Dnld
Fail Trap

card Sw card Sw Dnld


Dnld Fail Fail Trap
Trap

IManagedEle F
ment

wrn F

card Sw Slt Ver


Change Trap

card Sw
Slt Ver
Change
Trap

card Sw Slt Ver N


Change Trap

IManagedEle F
ment

wrn F

card Test Trap

card Test card Test Trap


Trap

IManagedEle F
ment

wrn F

card Sw Dnld
Abort Trap

card Sw
Dnld
Abort
Trap

card Sw Dnld
Abort Trap

IManagedEle F
ment

wrn F

card Shutdown
Trap

card
Shutdow
n Trap

card Shutdown N
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-429

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn F

card Format
Cmplt Trap

IManagedEle F
ment

wrn F

card
Small
Cam
DbChan
ge Trap

card Small
Cam
DbChange
Trap

IManagedEle F
ment

wrn F

NpTm
Rsrc Ex
Trap

NpTm Rsrc Ex N
Trap

IManagedEle F
ment

min F

Card AsReit
Trap

IManagedEle F
ment

maj F

node Attr node Attr


ChangeD ChangeDb
b Change Change Trap
Trap

IManagedEle F
ment

wrn F

node Ready
Trap

IManagedEle F
ment

wrn F

Bits clock
change trap

IManagedEle F
ment

min F

IManagedEle F
ment

wrn F

node SwDnld N
Init Db Change
Trap

IManagedEle F
ment

wrn F

Event
Subtype

card Format
Cmplt Trap

card
Format
Cmplt
Trap

card Small Cam


DbChange Trap

NpTm Rsrc Ex
Trap

Card AsReit Trap Card

AsReit
Trap
node Attr
ChangeDb
Change Trap

node Ready Trap node

Ready
Trap
Bits clock
change trap

Bits
clock
change
trap

node SwDnld
node SwDnld
node
Done Db Change SwDnld Done Db
Trap
Done Db Change Trap

Is Ticketable

Weight

Severity

Is Correlation
Allowed

card Fast card Fast Boot


Failed Trap
Boot
Failed
Trap

Activate
Flow

IManagedEle F
ment

card Fast Boot


Failed Trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

Change
Trap
node SwDnld
Init Db Change
Trap

node
SwDnld
Init Db
Change
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-430

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

oper Non
Redundant Db
Change Trap

oper Non oper Non


Redunda Redundant Db
Change Trap
nt Db
Change
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

node SwDnld
node SwDnld
node
Abort Db Change SwDnld Abort Db
Trap
Abort Db Change Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

fully
fully
Redunda Redundant Db
Change Trap
nt Db
Change
Trap

Event
Type

Expedites
Polling

fully Redundant
Db Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Change
Trap
node Restart
InProg
DbChange Trap

node
Restart
InProg
DbChan
ge Trap

node Upgrade
Begin Db
Change Trap

node Upgrade
node
Upgrade Begin Db
Begin Db Change Trap
Change
Trap

IManagedEle F
ment

wrn F

node Enter
Config
Restricted Db
Change Trap

node
Enter
Config
Restricte
d Db
Change
Trap

node Enter
Config
Restricted Db
Change Trap

IManagedEle F
ment

wrn F

node Exit
Config
Restricted Db
Restricte Change Trap
d Db
Change
Trap

IManagedEle F
ment

wrn F

node Exit Config node


Restricted Db
Exit
Change Trap
Config

node Restart
InProg
DbChange
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-431

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

node Exit
Isolation Db
Change Trap

node Exit
node
Isolation Db
Exit
Isolation Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

node Enter
HwProg Db
Change Trap

node
Enter
HwProg
Db
Change
Trap

node Enter
HwProg Db
Change Trap

IManagedEle F
ment

wrn F

node Exit
HwProg Db
Change Trap

node
Exit
HwProg
Db
Change
Trap

node Exit
HwProg Db
Change Trap

IManagedEle F
ment

wrn F

node Slt Upgd


Change Db
Change Trap

node Slt
Upgd
Change
Db
Change
Trap

node Slt Upgd


Change Db
Change Trap

IManagedEle F
ment

wrn F

Node Usr Abt


Trap

Node
Usr Abt
Trap

Node Usr Abt


Trap

IManagedEle F
ment

wrn F

Ont Fiv PmVo


Trap

Ont Fiv
PmVo
Trap

Ont Fiv PmVo


Trap

IManagedEle F
ment

wrn F

Tca Events Trap

Tca
Events
Trap

Tca Events
Trap

IManagedEle F
ment

wrn F

Olt Fiv PmDa


Trap

Olt Fiv
PmDa
Trap

Olt Fiv PmDa


Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

node Enter
node
Isolation Db
Enter
Isolation Change Trap
Db
Change
Trap

Event
Type

Expedites
Polling

node Enter
Isolation Db
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-432

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

mgmt Ip Attr
Change Trap

IManagedEle F
ment

wrn F

sys Clk
Attr
Change
Trap

sys Clk Attr


Change Trap

IManagedEle F
ment

wrn F

aco Button On
Trap

aco
Button
On Trap

aco Button On
Trap

IManagedEle F
ment

wrn F

invalid Mgmt
IpAddress Trap

invalid Mgmt
N
invalid
IpAddress Trap
Mgmt
IpAddres
s Trap

IManagedEle F
ment

wrn F

db Serv Attr
Change Trap

db Serv
Attr
Change
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

mgmt Ip Attr
Change Trap

mgmt Ip
Attr
Change
Trap

sys Clk Attr


Change Trap

db Serv Attr
Change Trap

power LedMask power


power
Chg Trap
LedMask LedMask Chg

Is Ticketable

Auto Clear

code Serv Attr


code
Serv Attr Change Trap
Change
Trap

Severity

Weight

code Serv Attr


Change Trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Chg Trap Trap


trans Power Chg trans
Trap
Power

trans Power
Chg Trap

Chg Trap
mgmt Ip Down
Trap

mgmt Ip
Down
Trap

mgmt Ip Down N
Trap

IManagedEle F
ment

wrn F

ntp Host Add


DbChange Trap

ntp Host
Add
DbChan
ge Trap

ntp Host Add


DbChange
Trap

IManagedEle F
ment

wrn F

ntp Host Mod


DbChange Trap

ntp Host
Mod
DbChan
ge Trap

ntp Host Mod


DbChange
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-433

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

ntp Auth KeyDel


DbChange Trap

ntp Auth
KeyDel
DbChan
ge Trap

ntp Auth
KeyDel
DbChange
Trap

IManagedEle F
ment

wrn F

msg Drop
DbChange Trap

msg
Drop
DbChan
ge Trap

msg Drop
DbChange
Trap

IManagedEle F
ment

wrn F

N
glob Mgmt
Redir Attr
ChgDb Change
Trap

IManagedEle F
ment

wrn F

glob Mgmt Redir glob


Attr ChgDb
Mgmt
Change Trap
Redir

Attr
ChgDb
Change
Trap

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

ntp Host Del


DbChange
Trap

Event
Type

Event Source
(IMO Name)

ntp Host
Del
DbChan
ge Trap

Expedites
Polling

ntp Host Del


DbChange Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

slHost Add
DbChange Trap

slHost
Add
DbChan
ge Trap

slHost Add
DbChange
Trap

IManagedEle F
ment

wrn F

slHost Mod
DbChange Trap

slHost
Mod
DbChan
ge Trap

slHost Mod
DbChange
Trap

IManagedEle F
ment

wrn F

slHost Del
DbChange Trap

slHost
Del
DbChan
ge Trap

slHost Del
DbChange
Trap

IManagedEle F
ment

wrn F

slFile Add
DbChange Trap

slFile
Add
DbChan
ge Trap

slFile Add
DbChange
Trap

IManagedEle F
ment

wrn F

slFile Mod
DbChange Trap

slFile
Mod
DbChan
ge Trap

slFile Mod
DbChange
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-434

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

panel
Unplugged Trap

panel
Unplugg
ed Trap

panel
Unplugged
Trap

IManagedEle F
ment

maj F

glob Access
ModeChg Trap

glob
Access
ModeCh
g Trap

glob Access
N
ModeChg Trap

IManagedEle F
ment

wrn F

glob User Attr


Chg Trap

glob
glob User Attr
User Attr Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

glob Login Attr


Chg Trap

glob Login Attr N


glob
Chg Trap
Login
Attr Chg
Trap

IManagedEle F
ment

wrn F

File OpSucc
Trap

File
OpSucc
Trap

File OpSucc
Trap

IManagedEle F
ment

wrn F

File OpFail Trap

File
OpFail
Trap

File OpFail
Trap

IManagedEle F
ment

wrn F

Ntp Auth Trap

Ntp Auth Ntp Auth Trap


Trap

IManagedEle F
ment

wrn F

Bits Alm Chg


Trap

Bits Alm Bits Alm Chg


Chg Trap Trap

IManagedEle F
ment

wrn F

Bits ClkUp Trap

Bits
ClkUp
Trap

Bits ClkUp
Trap

IManagedEle F
ment

wrn F

Bits ClkDn Trap

Bits
ClkDn
Trap

Bits ClkDn
Trap

IManagedEle F
ment

maj F

pcm Aps Grp


Added Trap

pcm Aps pcm Aps Grp


Added Trap
Grp
Added
Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

slFile Del
DbChange
Trap

Event
Type

Event Source
(IMO Name)

slFile
Del
DbChan
ge Trap

Expedites
Polling

slFile Del
DbChange Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-435

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm Aps Grp


Attr ChgDb
Change Trap

IManagedEle F
ment

wrn F

pcm Aps Grp


Online Trap

pcm Aps pcm Aps Grp


Online Trap
Grp
Online
Trap

IManagedEle F
ment

info F

pcm Aps Grp


Offline Trap

pcm Aps pcm Aps Grp


Offline Trap
Grp
Offline
Trap

IManagedEle F
ment

wrn F

pcm Aps Mode


Mismatch Trap

pcm Aps pcm Aps Mode N


Mismatch Trap
Mode
Mismatc
h Trap

IManagedEle F
ment

wrn F

pcm Aps Chan


Mismatch Trap

pcm Aps pcm Aps Chan N


Mismatch Trap
Chan
Mismatc
h Trap

IManagedEle F
ment

wrn F

pcm Aps PSBF


Trap

pcm Aps pcm Aps PSBF N


PSBF
Trap
Trap

IManagedEle F
ment

wrn F

pcm Aps FEPLF


Trap

pcm Aps pcm Aps


FEPLF
FEPLF Trap
Trap

IManagedEle F
ment

wrn F

pcm Aps Chn


Added Trap

pcm Aps pcm Aps Chn


Added Trap
Chn
Added
Trap

IManagedEle F
ment

wrn F

pcm Aps Chn


Deleted Trap

pcm Aps pcm Aps Chn


Deleted Trap
Chn
Deleted
Trap

IManagedEle F
ment

wrn F

pcm Aps Grp Attr pcm Aps


ChgDb Change
Grp Attr
Trap
ChgDb

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

pcm Aps pcm Aps Grp


Deleted Trap
Grp
Deleted
Trap

Event Source
(IMO Name)

IManagedEle F
ment

pcm Aps Grp


Deleted Trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Change
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-436

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm Aps Chn


SwoDb Change
Trap

pcm Aps pcm Aps Chn


SwoDb
Chn
Change Trap
SwoDb
Change
Trap

IManagedEle F
ment

min F

shelf Attr
ChangeDb
Change Trap

shelf Attr shelf Attr


ChangeD ChangeDb
b Change Change Trap
Trap

IManagedEle F
ment

wrn F

Fan Shut Dn
Trap

IManagedEle F
ment

maj F

Fan Shut Dn Trap Fan Shut

Dn Trap

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

pcm Aps pcm Aps Chn


Chn Attr Attr ChgDb
Change Trap
ChgDb
Change
Trap

Expedites
Polling

pcm Aps Chn


Attr ChgDb
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

env1 Trap

env1
Trap

env1 Trap

IManagedEle F
ment

wrn F

env2 Trap

env2
Trap

env2 Trap

IManagedEle F
ment

wrn F

env3 Trap

env3
Trap

env3 Trap

IManagedEle F
ment

wrn F

env4 Trap

env4
Trap

env4 Trap

IManagedEle F
ment

wrn F

Tm Fuse Open
Trap

Tm Fuse
Open
Trap

Tm Fuse Open N
Trap

IManagedEle F
ment

wrn F

Fire Cond Trap

Fire
Cond
Trap

Fire Cond Trap N

IManagedEle F
ment

criti F
cal

pcm Vt Attr Chg


Db Change Trap

pcm Vt Attr
pcm Vt
Attr Chg Chg Db
Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

pcm Vt Admin
Chg Trap

pcm Vt
pcm Vt Admin N
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

Info F

pcm Vt Admin
Chg Trap

pcm Vt
pcm Vt Admin N
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-437

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm Vt Online
Trap

pcm Vt
Online
Trap

IManagedEle F
ment

wrn F

pcm Vt AIS Trap

pcm Vt
pcm Vt AIS
AIS Trap Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm Vt UNEQ N
Trap

IManagedEle F
ment

wrn F

pcm Vt PLM
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm Vt UAS
Trap

IManagedEle F
ment

wrn F

pcm Vt LOP Trap pcm Vt

LOP
Trap
pcm Vt UNEQ
Trap

pcm Vt
UNEQ
Trap

pcm Vt PLM Trap pcm Vt

PLM
Trap
pcm Vt RDI Trap

Event
Subtype
pcm Vt Online N
Trap

pcm Vt LOP
Trap

pcm Vt
pcm Vt RDI
RDI Trap Trap

pcm Vt UAS Trap pcm Vt

UAS
Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

pcm Vt
pcm Vt Admin N
Admin
Chg Trap
Chg Trap

Expedites
Polling

pcm Vt Admin
Chg Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

pcm Vt ERDI
Trap

pcm Vt
ERDI
Trap

pcm Vt ERDI
Trap

IManagedEle F
ment

wrn F

pcm Vt Fe UAS
Trap

pcm Vt
Fe UAS
Trap

pcm Vt Fe
UAS Trap

IManagedEle F
ment

wrn F

pcm Vtg Attr


Chg Db
Change Trap

IManagedEle F
ment

wrn F

pcm Ds3 Chn


Attr Chg Db
Change Trap

IManagedEle F
ment

wrn F

pcm Vtg Attr Chg pcm Vtg


Db Change Trap Attr Chg

Db
Change
Trap
pcm Ds3 Chn Attr pcm Ds3
Chg Db Change Chn Attr
Trap
Chg Db

Change
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-438

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm Ds3 Chn


LOS Trap

pcm Ds3 pcm Ds3 Chn


Chn LOS LOS Trap
Trap

IManagedEle F
ment

maj F

pcm Ds3 Chn LOF pcm Ds3 pcm Ds3 Chn


Trap
Chn LOF LOF Trap

IManagedEle F
ment

maj F

pcm Ds3 Chn


AIS Trap

IManagedEle F
ment

maj F

pcm Ds3 Chn RAI pcm Ds3 pcm Ds3 Chn


Trap
Chn RAI RAI Trap

IManagedEle F
ment

maj F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

pcm Ds3 pcm Ds3 Chn N


Chnzn Chg Db
Chn
Change Trap
Chnzn
Chg Db
Change
Trap

Event
Type

Expedites
Polling

pcm Ds3 Chn


Chnzn Chg Db
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
pcm Ds3 Chn AIS pcm Ds3
Trap
Chn AIS

Trap

Trap
pcm Ds3 Chn
Lpbk Trap

pcm Ds3 pcm Ds3 Chn


Lpbk Trap
Chn
Lpbk
Trap

IManagedEle F
ment

min F

pcm Ds3 Chn


Bert Trap

pcm Ds3 pcm Ds3 Chn


Chn Bert Bert Trap
Trap

IManagedEle F
ment

min F

pcm Ds3 Chn


UAS Trap

pcm Ds3 pcm Ds3 Chn


UAS Trap
Chn
UAS
Trap

IManagedEle F
ment

min F

pcm Ds3 Chn


LCD Trap

pcm Ds3 pcm Ds3 Chn


LCD Trap
Chn
LCD
Trap

IManagedEle F
ment

min F

pcm Ds3 Chn


Admin Chg Trap

pcm Ds3 pcm Ds3 Chn


Admin Chg
Chn
Trap
Admin
Chg Trap

IManagedEle F
ment

wrn F

pcm Ds3 Chn


Online Trap

pcm Ds3 pcm Ds3 Chn


Online Trap
Chn
Online
Trap

IManagedEle F
ment

Info F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-439

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Db
Change
Trap

Auto
Remove

Flapping

wrn F

Is Ticketable

Severity

Auto Clear

IManagedEle F
ment

Activate
Flow

Weight

pcm Ds1 Attr


Chg Db
Change Trap

Event Source
(IMO Name)

Expedites
Polling

Is Correlation
Allowed

pcm Ds1 Attr Chg pcm Ds1


Db Change Trap Attr Chg

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

pcm Ds1 Admin


Chg Trap

pcm Ds1 pcm Ds1


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

info F

pcm Ds1 Admin


Chg Trap

pcm Ds1 pcm Ds1


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

pcm Ds1 Admin


Chg Trap

pcm Ds1 pcm Ds1


Admin
Admin Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

pcm Ds1 Online


Trap

pcm Ds1 pcm Ds1


Online
Online Trap
Trap

IManagedEle F
ment

Info F

pcm Ds1 LOF


Trap

pcm Ds1 pcm Ds1 LOF


LOF
Trap
Trap

IManagedEle F
ment

maj F

pcm Ds1 AIS


Trap

pcm Ds1 pcm Ds1 AIS


AIS Trap Trap

IManagedEle F
ment

maj F

pcm Ds1 RAI


Trap

pcm Ds1 pcm Ds1 RAI


RAI Trap Trap

IManagedEle F
ment

maj F

pcm Ds1 Lpbk


Trap

pcm Ds1 pcm Ds1 Lpbk N


Lpbk
Trap
Trap

IManagedEle F
ment

min F

pcm Ds1 Bert


Trap

pcm Ds1 pcm Ds1 Bert


Bert Trap Trap

IManagedEle F
ment

min F

pcm Ds1 UAS


Trap

pcm Ds1 pcm Ds1 UAS


UAS
Trap
Trap

IManagedEle F
ment

min F

pcm Ds1 LCD


Trap

pcm Ds1 pcm Ds1 LCD


LCD
Trap
Trap

IManagedEle F
ment

min F

Ds1 LOS Trap

Ds1 LOS Ds1 LOS Trap


Trap

IManagedEle F
ment

maj F

Ds1 CRC Trap

Ds1 CRC Ds1 CRC Trap N


Trap

IManagedEle F
ment

maj F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-440

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Bert Berr Trap

min F

Ch Brt Start
Trap

IManagedEle F
ment

wrn F

Ch Brt Stop
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

min F

pcm Bndl
Added Trap

IManagedEle F
ment

wrn F

pcm Bndl
Deleted Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm Bndl
Admin Chg
Trap

IManagedEle F
ment

Info F

pcm Bndl
Admin Chg
Trap

IManagedEle F
ment

wrn F

pcm Bndl
Admin Chg
Trap

IManagedEle F
ment

wrn F

pcm Bndl
Online Trap

IManagedEle F
ment

wrn F

Bert Berr Bert Berr Trap


Trap

pcm Bndl Added pcm


Trap
Bndl

Is Ticketable

IManagedEle F
ment

Severity

Activate
Flow

Ds1 LOOP
Trap

Event Source
(IMO Name)

Flapping

Stop
Trap

Auto
Remove

Ch Brt Stop Trap Ch Brt

Auto Clear

Start
Trap

Weight

Ch Brt Start Trap Ch Brt

Is Correlation
Allowed

Ds1
LOOP
Trap

Expedites
Polling

Event
Type

Correlate

Ds1 LOOP Trap

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Added
Trap
pcm Bndl
Deleted Trap

pcm
Bndl
Deleted
Trap

pcm Bndl Attr


Chg Db Change
Trap

pcm Bndl Attr


pcm
Bndl Attr Chg Db
Chg Db Change Trap
Change
Trap

pcm Bndl Admin pcm


Chg Trap
Bndl

Admin
Chg Trap
pcm Bndl Admin pcm
Chg Trap
Bndl

Admin
Chg Trap
pcm Bndl Admin pcm
Chg Trap
Bndl

Admin
Chg Trap
pcm Bndl Online pcm
Trap
Bndl

Online
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-441

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

pcm Bert Start


Trap

pcm Bert pcm Bert Start


Start
Trap
Trap

IManagedEle F
ment

Info F

pcm Bert Stop


Trap

pcm Bert pcm Bert Stop


Stop
Trap
Trap

IManagedEle F
ment

wrn F

Bndl No Mem
Trap

Bndl No
Mem
Trap

Bndl No Mem
Trap

IManagedEle F
ment

min F

Bndl Lops Trap

Bndl
Lops
Trap

Bndl Lops Trap N

IManagedEle F
ment

wrn F

Bndl Init Trap

Bndl Init Bndl Init Trap


Trap

IManagedEle F
ment

wrn F

Bndl Term Trap

Bndl
Term
Trap

Bndl Term
Trap

IManagedEle F
ment

wrn F

Bndl Lpbk Trap

Bndl
Lpbk
Trap

Bndl Lpbk
Trap

IManagedEle F
ment

wrn F

pcm Channel
Added Trap

pcm
Channel
Added
Trap

pcm Channel
Added Trap

IManagedEle F
ment

wrn F

pcm Channel
Deleted Trap

pcm
Channel
Deleted
Trap

pcm Channel
Deleted Trap

IManagedEle F
ment

wrn F

pcm Channel
Attr Chg Db
Change Trap

pcm Channel
pcm
Channel Attr Chg Db
Attr Chg Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

pcm Channel
Admin Chg Trap

pcm Channel
pcm
Channel Admin Chg
Trap
Admin
Chg Trap

IManagedEle F
ment

Info F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

pcm
pcm Bndl Bert
Bndl
Trap
Bert Trap

Event
Type

Expedites
Polling

pcm Bndl Bert


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-442

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm Channel
Admin Chg Trap

pcm Channel
pcm
Channel Admin Chg
Trap
Admin
Chg Trap

IManagedEle F
ment

wrn F

pcm Channel
Offline Trap

pcm
Channel
Offline
Trap

pcm Channel
Offline Trap

IManagedEle F
ment

min F

pcm Channel
Online Trap

pcm
Channel
Online
Trap

pcm Channel
Online Trap

IManagedEle F
ment

Info F

pcm Channel
Failed Trap

pcm
Channel
Failed
Trap

pcm Channel
Failed Trap

IManagedEle F
ment

min F

pcm Path AIS


Trap

pcm Path pcm Path AIS


AIS Trap Trap

IManagedEle F
ment

min F

pcm Path RDI


Trap

pcm Path pcm Path RDI


RDI Trap Trap

IManagedEle F
ment

min F

pcm Path ERDI


Trap

pcm Path pcm Path ERDI N


ERDI
Trap
Trap

IManagedEle F
ment

min F

pcm Path LOP


Trap

pcm Path pcm Path LOP


LOP
Trap
Trap

IManagedEle F
ment

min F

pcm Path UNEQ


Trap

pcm Path pcm Path


UNEQ
UNEQ Trap
Trap

IManagedEle F
ment

min F

pcm Path PLM


Trap

pcm Path pcm Path PLM N


PLM
Trap
Trap

IManagedEle F
ment

min F

pcm Path DS3


OOF Trap

pcm Path pcm Path DS3


OOF Trap
DS3
OOF
Trap

IManagedEle F
ment

min F

Event
Subtype
N

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

pcm Channel
pcm
Channel Admin Chg
Trap
Admin
Chg Trap

Event
Type

Expedites
Polling

pcm Channel
Admin Chg Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-443

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

pcm Path DS3


YEL Trap

pcm Path pcm Path DS3


YEL Trap
DS3
YEL
Trap

IManagedEle F
ment

min F

pcm Path
PLCPLOF Trap

pcm Path pcm Path


PLCPLO PLCPLOF
F Trap
Trap

IManagedEle F
ment

min F

pcm Path
PLCPYEL Trap

pcm Path pcm Path


PLCPYE PLCPYEL
L Trap
Trap

IManagedEle F
ment

min F

pcm Path NBET


Trap

pcm Path pcm Path


NBET
NBET Trap
Trap

IManagedEle F
ment

min F

pcm Path FBET


Trap

pcm Path pcm Path


FBET
FBET Trap
Trap

IManagedEle F
ment

min F

pcm Path Lpbk


Trap

pcm Path pcm Path Lpbk N


Lpbk
Trap
Trap

IManagedEle F
ment

min F

pcm Path TIM


Trap

pcm Path pcm Path TIM


Trap
TIM
Trap

IManagedEle F
ment

min F

pcm Path Xcon


Alm Trap

pcm Path pcm Path Xcon N


Alm Trap
Xcon
Alm
Trap

IManagedEle F
ment

min F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

pcm Channel
pcm Channel
pcm
Mapping Chg Db Channel Mapping Chg
Change Trap
Mapping Db Change

Chg Db
Change
Trap
pcm Lag Add Db pcm Lag
Change Trap
Add Db

Change
Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

pcm Path pcm Path DS3


DS3 AIS AIS Trap
Trap

Expedites
Polling

pcm Path DS3


AIS Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap

pcm Lag Add


Db Change
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-444

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Is Ticketable

IManagedEle F
ment

Severity

Auto Clear

Activate
Flow

pcm Lag Attr


Chg Db
Change Trap

Event Source
(IMO Name)

Weight

Db
Change
Trap

Is Correlation
Allowed

pcm Lag Attr Chg pcm Lag


Db Change Trap Attr Chg

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

pcm Lag Del Db


Change Trap

pcm Lag
Del Db
Change
Trap

pcm Lag Del


Db Change
Trap

IManagedEle F
ment

wrn F

pcm Lag Admin


Chg Db Change
Trap

pcm Lag
Admin
Chg Db
Change
Trap

pcm Lag
N
Admin Chg Db
Change Trap

IManagedEle F
ment

Info F

pcm Lag Admin


Chg Db Change
Trap

pcm Lag
Admin
Chg Db
Change
Trap

pcm Lag
N
Admin Chg Db
Change Trap

IManagedEle F
ment

wrn F

pcm Lag Admin


Chg Db Change
Trap

pcm Lag
Admin
Chg Db
Change
Trap

pcm Lag
N
Admin Chg Db
Change Trap

IManagedEle F
ment

wrn F

pcm Lag OffLine


Db Change Trap

pcm Lag
OffLine
Db
Change
Trap

pcm Lag
OffLine Db
Change Trap

IManagedEle F
ment

maj F

pcm Lag OnLine


Db Change Trap

pcm Lag
OnLine
Db
Change
Trap

pcm Lag
OnLine Db
Change Trap

IManagedEle F
ment

Info F

pcm Lag Mbr


Add Db Change
Trap

pcm Lag pcm Lag Mbr


Mbr Add Add Db
Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-445

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Db
Change
Trap
pcm Lag Mbr
Add Done Db
Change Trap

Auto Clear

Auto
Remove

Flapping

wrn F

Is Ticketable

Weight

Severity

Is Correlation
Allowed

IManagedEle F
ment

Activate
Flow

Correlate

pcm Lag Mbr N


Del Db Change
Trap

Event Source
(IMO Name)

Event
Subtype

Event
Type

pcm Lag Mbr Del pcm Lag


Db Change Trap Mbr Del

Expedites
Polling

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

pcm Lag pcm Lag Mbr


Mbr Add Add Done Db
Done Db Change Trap
Change
Trap

IManagedEle F
ment

wrn F

pcm Lag Mbr Del pcm Lag pcm Lag Mbr


Done Db Change Mbr Del Del Done Db
Trap
Done Db Change Trap

IManagedEle F
ment

wrn F

Change
Trap
Lacp Churn Trap

Lacp
Churn
Trap

Lacp Churn
Trap

IManagedEle F
ment

wrn F

Lacp Mbr Up
Trap

Lacp
Mbr Up
Trap

Lacp Mbr Up
Trap

IManagedEle F
ment

wrn F

Lacp Mbr Dn
Trap

Lacp
Mbr Dn
Trap

Lacp Mbr Dn
Trap

IManagedEle F
ment

wrn F

if Add Trap

if Add
Trap

if Add Trap

IManagedEle F
ment

wrn F

if Del Trap

if Del
Trap

if Del Trap

IManagedEle F
ment

wrn F

if Attr Chg Db
Change Trap

if Attr
Chg Db
Change
Trap

if Attr Chg Db
Change Trap

IManagedEle F
ment

wrn F

if Cac Failed
Trap

if Cac
Failed
Trap

if Cac Failed
Trap

IManagedEle F
ment

wrn F

if Cac Un Sub
Trap

if Cac Un if Cac Un Sub


Sub Trap Trap

IManagedEle F
ment

Info F

if Set Usr Bw
if Set Usr if Set Usr Bw
Exc Phy Bw Trap Bw Exc Exc Phy Bw

IManagedEle F
ment

min F

Phy Bw
Trap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-446

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

info F

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Is Correlation
Allowed

if Clr Usr Bw Exc if Clr Usr if Clr Usr Bw


Phy Bw Trap
Bw Exc Exc Phy Bw

Event Source
(IMO Name)

Expedites
Polling

Event
Type

Phy Bw
Trap

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Trap

br If Max Mac
Reached Trap

br If Max br If Max Mac


Reached Trap
Mac
Reached
Trap

IManagedEle F
ment

min F

br If Max Mac
Relearn Trap

br If Max br If Max Mac


Relearn Trap
Mac
Relearn
Trap

IManagedEle F
ment

info F

br If Max Mac
High Thresh
Trap

br If Max br If Max Mac


High Thresh
Mac
Trap
High
Thresh
Trap

IManagedEle F
ment

wrn F

br If Max Mac
br If Max br If Max Mac
Low Thresh Trap Mac Low Low Thresh

IManagedEle F
ment

wrn F

if Acl Chg Trap

if Acl
if Acl Chg Trap N
Chg Trap

IManagedEle F
ment

wrn F

if QoS Chg Trap

if QoS
if QoS Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Thresh
Trap

Trap

br If St Mac Add br If St
br If St Mac
Trap
Mac Add Add Trap

Trap
br If St Mac Del
Trap

br If St
Mac Del
Trap

IManagedEle F
ment

wrn F

ip If Add Done
Trap

ip If Add ip If Add Done N


Done
Trap
Trap

IManagedEle F
ment

wrn F

gre If Add Done


Trap

gre If
Add
Done
Trap

IManagedEle F
ment

wrn F

br If St Mac
Del Trap

gre If Add
Done Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-447

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

If Mrr Adm Trap

If Mrr
Adm
Trap

If Mrr Adm
Trap

IManagedEle F
ment

wrn F

Irb Bulk Chg


Trap

Irb Bulk Irb Bulk Chg


Chg Trap Trap

IManagedEle F
ment

wrn F

if Arp Fl Chg
Trap

if Arp Fl if Arp Fl Chg


Chg Trap Trap

IManagedEle F
ment

wrn F

If Atm Ntt Ch
Trap

If Atm
Ntt Ch
Trap

If Atm Ntt Ch
Trap

IManagedEle F
ment

wrn F

ckt OnLine Trap

ckt
OnLine
Trap

ckt OnLine
Trap

IManagedEle F
ment

info F

ckt OffLine Trap

ckt
OffLine
Trap

ckt OffLine
Trap

IManagedEle F
ment

min F

ckt Bulk
Change Trap

IManagedEle F
ment

min F

ckt Bulk Change ckt Bulk


Trap
Change

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

gre If Del Done N


Trap

Event Source
(IMO Name)

gre If
Del
Done
Trap

Event
Type

Expedites
Polling

gre If Del Done


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
ckt Global
Changed Trap

ckt Global
ckt
Changed Trap
Global
Changed
Trap

IManagedEle F
ment

wrn F

Ckt Mir TBCh

Ckt Mir
TBCh

Ckt Mir TBCh

IManagedEle F
ment

wrn F

Ckt Mir SBCh

Ckt Mir
SBCh

Ckt Mir SBCh

IManagedEle F
ment

wrn F

ckt Bndl OnLine


Trap

ckt Bndl
OnLine
Trap

ckt Bndl
OnLine Trap

IManagedEle F
ment

wrn F

ckt Bndl OffLine


Trap

ckt Bndl
OffLine
Trap

ckt Bndl
OffLine Trap

IManagedEle F
ment

wrn F

ckt Bndl Add


Mbr Trap

ckt Bndl ckt Bndl Add


Add Mbr Mbr Trap
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-448

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

ckt Bndl Del


Mbr Trap

Event Source
(IMO Name)

Is Correlation
Allowed

ckt Bndl Del Mbr ckt Bndl


Trap
Del Mbr

Expedites
Polling

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Trap
ckt Bndl Bulk
Change Trap

ckt Bndl
Bulk
Change
Trap

ckt Bndl Bulk


Change Trap

IManagedEle F
ment

wrn F

ckt Bndl Global


Changed Trap

ckt Bndl ckt Bndl


Global
Global
Changed Changed Trap
Trap

IManagedEle F
ment

wrn F

CB Mir Bulk
Trap

CB Mir
Bulk
Trap

IManagedEle F
ment

wrn F

eva Event Ack


Trap

eva
eva Event Ack
Event
Trap
Ack Trap

IManagedEle F
ment

wrn F

eva Bulk Ack


Trap

eva Bulk eva Bulk Ack


Ack Trap Trap

IManagedEle F
ment

wrn F

eva Unack
Minor Trap

eva
Unack
Minor
Trap

eva Unack
Minor Trap

IManagedEle F
ment

min F

eva Unack
Major Trap

eva
Unack
Major
Trap

eva Unack
Major Trap

IManagedEle F
ment

min F

eva Event
Param Change
Trap

IManagedEle F
ment

wrn F

eva Hist Wrap


Trap

IManagedEle F
ment

wrn F

eva Restart
Trap

IManagedEle F
ment

wrn F

eva Seq Wrap


Trap

IManagedEle F
ment

wrn F

eva Event Param eva


Change Trap
Event

Param
Change
Trap
eva Hist Wrap
Trap

eva Hist
Wrap
Trap

eva Restart Trap eva

Restart
Trap
eva Seq Wrap
Trap

eva Seq
Wrap
Trap

CB Mir Bulk
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-449

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

eva Un resolved
Trap

eva Un
resolved
Trap

eva Un
resolved Trap

IManagedEle F
ment

maj F

Env Alm Cfg


Cfg Trap Trap

IManagedEle F
ment

wrn F

Evt Clr Alm Trap

Evt Clr
Alm
Trap

Evt Clr Alm


Trap

IManagedEle F
ment

wrn F

mpls Lsp Added


Trap

mpls Lsp mpls Lsp


Added
Added Trap
Trap

IManagedEle F
ment

wrn F

mpls Lsp
Deleted Trap

mpls Lsp mpls Lsp


Deleted Deleted Trap
Trap

IManagedEle F
ment

wrn F

mpls Lsp Attr


Change Db
Change Trap

mpls Lsp mpls Lsp Attr


Change Db
Attr
Change Trap
Change
Db
Change
Trap

IManagedEle F
ment

wrn F

mpls Lsp
Standby Trap

mpls Lsp mpls Lsp


Standby Standby Trap
Trap

IManagedEle F
ment

wrn F

mpls Lsp Force


Path Trap

mpls Lsp mpls Lsp Force N


Path Trap
Force
Path
Trap

IManagedEle F
ment

wrn F

mpls Lsp Cfg


Update Trap

mpls Lsp mpls Lsp Cfg


Update Trap
Cfg
Update
Trap

IManagedEle F
ment

wrn F

mpls Lsp
Updated Trap

mpls Lsp mpls Lsp


Updated Updated Trap
Trap

IManagedEle F
ment

wrn F

mpls Lsp
Optimized Db
Change Trap

mpls Lsp mpls Lsp


Optimize Optimized Db
Change Trap
d Db
Change
Trap

IManagedEle F
ment

wrn F

Event
Subtype

Env Alm Cfg Trap Env Alm

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

eva Conf eva Conf Trap


Trap

Event
Type

Expedites
Polling

eva Conf Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-450

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Weight

Auto Clear

Auto
Remove

Flapping

wrn F

Is Ticketable

Is Correlation
Allowed

IManagedEle F
ment

Severity

Correlate

mpls Lsp Remote mpls Lsp mpls Lsp


N
Dt Chg Db
Remote Remote Dt Chg
Change Trap
Db Change
Dt Chg

Activate
Flow

Event
Type

Event Source
(IMO Name)

Expedites
Polling

Tellabs V2 Trap Registry Parameters (Continued)

Event
Subtype

Short
Description

Table 10-54

Db
Change
Trap

Trap

Lsp B Attr Ch
Trap

Lsp B
Attr Ch
Trap

Lsp B Attr Ch
Trap

IManagedEle F
ment

wrn F

Lsp B Adm Ch
Trap

Lsp B
Adm Ch
Trap

Lsp B Adm Ch N
Trap

IManagedEle F
ment

wrn F

dhcp Relay Ip
Fwd Prot Udp
Port Add Trap

dhcp Relay Ip
dhcp
Relay Ip Fwd Prot Udp
Fwd Prot Port Add Trap
Udp Port
Add Trap

IManagedEle F
ment

wrn F

dhcp Relay Ip
Fwd Prot Udp
Port Del Trap

dhcp Relay Ip
dhcp
Relay Ip Fwd Prot Udp
Fwd Prot Port Del Trap
Udp Port
Del Trap

IManagedEle F
ment

wrn F

dhcp Relay Inst


Attr Chg Trap

dhcp Relay Inst N


dhcp
Attr Chg Trap
Relay
Inst Attr
Chg Trap

IManagedEle F
ment

wrn F

dhcp Relay Ip
dhcp
Helper Addr Add Relay Ip
Trap
Helper

dhcp Relay Ip
Helper Addr
Add Trap

IManagedEle F
ment

wrn F

dhcp Relay Ip
Helper Addr Del
Trap

dhcp Relay Ip
dhcp
Relay Ip Helper Addr
Del Trap
Helper
Addr Del
Trap

IManagedEle F
ment

wrn F

dhcp Relay Intf


Attr Chg Trap

dhcp Relay Intf N


dhcp
Attr Chg Trap
Relay
Intf Attr
Chg Trap

IManagedEle F
ment

wrn F

Addr
Add Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-451

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

dhcp Relay Intf N


Admin State
Chg Trap

Expedites
Polling

Is Correlation
Allowed

dhcp Relay Intf dhcp


Admin State Chg Relay
Trap
Intf

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

Admin
State
Chg Trap
dhcp Relay Intf
Online Trap

dhcp
Relay
Intf
Online
Trap

dhcp Relay Intf N


Online Trap

IManagedEle F
ment

Info F

dhcp Relay Intf


Offline Trap

dhcp
Relay
Intf
Offline
Trap

dhcp Relay Intf N


Offline Trap

IManagedEle F
ment

wrn F

Pl Adr Thr Trap

Pl Adr
Pl Adr Thr
Thr Trap Trap

IManagedEle F
ment

wrn F

Srv Adr Thr


Thr Trap Trap

IManagedEle F
ment

wrn F

db Bup Trap

db Bup
Trap

db Bup Trap

IManagedEle F
ment

wrn F

db Res Trap

db Res
Trap

db Res Trap

IManagedEle F
ment

wrn F

db Copy Trap

db Copy
Trap

db Copy Trap

IManagedEle F
ment

wrn F

db Abt Trap

db Abt
Trap

db Abt Trap

IManagedEle F
ment

wrn F

db Inv Trap

db Inv
Trap

db Inv Trap

IManagedEle F
ment

wrn F

db Con Del Trap

db Con
db Con Del
Del Trap Trap

IManagedEle F
ment

wrn F

db Con Chg
Chg Trap Trap

IManagedEle F
ment

wrn F

db Val
Trap

db Val Trap

IManagedEle F
ment

wrn F

db Bak End Trap db Bak

db Bak End
End Trap Trap

IManagedEle F
ment

wrn F

db Res End Trap

db Res
db Res End
End Trap Trap

IManagedEle F
ment

wrn F

Srv Adr Thr Trap Srv Adr

db Con Chg Trap db Con


db Val Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-452

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

db Validate End
Trap

db
db Validate
Validate End Trap
End Trap

IManagedEle F
ment

wrn F

db Set Config
End Trap

db Set
db Set Config
Config
End Trap
End Trap

IManagedEle F
ment

wrn F

db Config Desc
Chg Trap

db Config Desc N
db
Chg Trap
Config
Desc
Chg Trap

IManagedEle F
ment

wrn F

db Checksum
Trap

db
Checksu
m Trap

db Checksum
Trap

IManagedEle F
ment

wrn F

db No Marker
Cfg Trap

db No
db No Marker
Marker
Cfg Trap
Cfg Trap

IManagedEle F
ment

wrn F

db Not Up To
Date Cfg Trap

db Not Up To
db Not
Date Cfg Trap
Up To
Date Cfg
Trap

IManagedEle F
ment

wrn F

tellabs snmp
Cold Start Trap

tellabs
snmp
Cold
Start
Trap

tellabs snmp
N
Cold Start Trap

IManagedEle F
ment

wrn F

tellabs snmp
Warm Start
Trap

IManagedEle F
ment

wrn F

tellabs snmp
Link Down
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

tellabs snmp
tellabs
Warm Start Trap snmp

Warm
Start
Trap

Event
Subtype

tellabs snmp
Link Down Trap

tellabs
snmp
Link
Down
Trap

tellabs snmp
Auth Fail Trap

tellabs snmp
tellabs
Auth Fail Trap
snmp
Auth Fail
Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

db Copy db Copy End


End Trap Trap

Event
Type

Expedites
Polling

db Copy End
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-453

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

snmp
Community Del
Trap

snmp
snmp
Commun Community
Del Trap
ity Del
Trap

IManagedEle F
ment

wrn F

snmp Attr
Change Db
Change Trap

snmp
Attr
Change
Db
Change
Trap

IManagedEle F
ment

wrn F

trap Client Add


Trap

trap
trap Client Add N
Client
Trap
Add Trap

IManagedEle F
ment

wrn F

trap Client Del


Trap

trap
trap Client Del N
Client
Trap
Del Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

snmp Targ Addr


Add Trap

snmp Targ
N
snmp
Addr Add Trap
Targ
Addr
Add Trap

IManagedEle F
ment

wrn F

snmp Targ Addr


Del Trap

snmp Targ
snmp
Addr Del Trap
Targ
Addr Del
Trap

IManagedEle F
ment

wrn F

snmp Access
Deny Trap

snmp
Access
Deny
Trap

IManagedEle F
ment

wrn F

snmp V3 Engine
Id Attr Change
Trap

snmp V3 snmp V3
Engine Id Attr
Engine
Change Trap
Id Attr
Change
Trap

IManagedEle F
ment

wrn F

trap Attr Change trap Attr


Db Change Trap Change

Db
Change
Trap

Event
Subtype
snmp Attr
Change Db
Change Trap

trap Attr
Change Db
Change Trap

snmp Access
Deny Trap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

snmp
snmp
Commun Community
Add Trap
ity Add
Trap

Event
Type

Expedites
Polling

snmp
Community Add
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-454

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

snmp v3 Context snmp v3


Del Trap
Context

snmp v3
Context Del
Del Trap Trap

IManagedEle F
ment

wrn F

snmp V3
Security Add
Trap

snmp V3 snmp V3
Security Security Add
Add Trap Trap

IManagedEle F
ment

wrn F

snmp V3
Security Del
Trap

snmp V3 snmp V3
Security Security Del
Del Trap Trap

IManagedEle F
ment

wrn F

snmp V3
Security Attr
Change Db
Change Trap

snmp V3
Security
Attr
Change
Db
Change
Trap

snmp V3
Security Attr
Change Db
Change Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

snmp V3 Context snmp V3 snmp V3


Add Trap
Context Context Add

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Add Trap Trap

snmp V3 Access snmp V3 snmp V3


Add Trap
Access
Access Add

Add Trap Trap


snmp V3 Access snmp V3 snmp V3
Del Trap
Access Del
Access

Del Trap Trap


snmp V3 Access snmp V3 snmp V3
Attr Change Db Access
Access Attr
Change Trap
Change Db
Attr

Change
Db
Change
Trap

Change Trap

snmp V3 User
Add Trap

snmp V3 snmp V3 User


User
Add Trap
Add Trap

IManagedEle F
ment

wrn F

snmp V3 User
Del Trap

snmp V3 snmp V3 User


User Del Del Trap
Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-455

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

snmp V3 Targ
Params Add
Trap

snmp V3 snmp V3 Targ


Params Add
Targ
Trap
Params
Add Trap

IManagedEle F
ment

wrn F

snmp V3 Targ
snmp V3 snmp V3 Targ
Params Del Trap Targ
Params Del

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Ctl Attr Chg Trap Ctl Attr

Ctl Attr Chg


Chg Trap Trap

IManagedEle F
ment

wrn F

cli Login Failure cli Login cli Login


Trap
Failure Trap
Failure

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

snmp V3 User
Attr Change
Db Change
Trap

Event
Type

Event Source
(IMO Name)

snmp V3
User Attr
Change
Db
Change
Trap

Expedites
Polling

snmp V3 User
Attr Change Db
Change Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
Params
Del Trap
snmp V3 Targ
Params Attr
Change Db
Change Trap

snmp V3
Targ
Params
Attr
Change
Db
Change
Trap

snmp V3 Targ
Params Attr
Change Db
Change Trap

Trap
cLI Login Trap

cLI
Login
Trap

cLI Login Trap N

IManagedEle F
ment

wrn F

cLI Logout Trap

cLI
Logout
Trap

cLI Logout
Trap

IManagedEle F
ment

wrn F

cLI Pwd Exp


Trap

cLI Pwd cLI Pwd Exp


Exp Trap Trap

IManagedEle F
ment

maj F

cLI Pwd Warn


Trap

cLI Pwd
Warn
Trap

IManagedEle F
ment

maj F

cLI Lock Out


Trap

cLI Lock cLI Lock Out


Out Trap Trap

IManagedEle F
ment

min F

cLI Pwd Warn


Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-456

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

min F

Ses In Thres
Trap

Ses In
Thres
Trap

Ses In Thres
Trap

IManagedEle F
ment

min F

tem Glbl Attr


Change Change
Trap

tem Glbl tem Glbl Attr


Change
Attr
Change Trap
Change
Change
Trap

IManagedEle F
ment

wrn F

tem CSPF Clr


Counters Trap

tem CSPF Clr


tem
Counters Trap
CSPF
Clr
Counters
Trap

IManagedEle F
ment

wrn F

tem If Attr
Change Db
Change Trap

tem If
Attr
Change
Db
Change
Trap

IManagedEle F
ment

wrn F

tem Level
N
Admin Change
Trap

IManagedEle F
ment

Info F

tem Level
N
Admin Change
Trap

IManagedEle F
ment

wrn F

tem Level
N
Admin Change
Trap

IManagedEle F
ment

wrn F

tem Isis If L1
Online Trap

IManagedEle F
ment

Info F

tem Level Admin tem


Change Trap
Level

Admin
Change
Trap
tem Level Admin tem
Change Trap
Level

Admin
Change
Trap
tem Level Admin tem
Change Trap
Level

Admin
Change
Trap
tem Isis If L1
Online Trap

tem Isis
If L1
Online
Trap

Event
Subtype
tem If Attr
Change Db
Change Trap

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

Un Lock Trap

Event Source
(IMO Name)

Un Lock
Trap

Event
Type

Expedites
Polling

Un Lock Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-457

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

tem Isis If L2
Online Trap

tem Isis
If L2
Online
Trap

tem Isis If L2
Online Trap

IManagedEle F
ment

Info F

tem Isis If L2
Offline Trap

tem Isis
If L2
Offline
Trap

tem Isis If L2
Offline Trap

IManagedEle F
ment

wrn F

isis Circ Admin


State Chg Db
Change Trap

isis Circ
Admin
State
Chg Db
Change
Trap

isis Circ
Admin State
Chg Db
Change Trap

IManagedEle F
ment

Info F

isis Circ Admin


State Chg Db
Change Trap

isis Circ
Admin
State
Chg Db
Change
Trap

isis Circ
Admin State
Chg Db
Change Trap

IManagedEle F
ment

wrn F

isis Circ Admin


State Chg Db
Change Trap

isis Circ
Admin
State
Chg Db
Change
Trap

isis Circ
Admin State
Chg Db
Change Trap

IManagedEle F
ment

wrn F

isis Circ Attr Chg isis Circ


Db Change Trap Attr Chg

isis Circ Attr


Chg Db
Change Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Db
Change
Trap
isis Circ Level
Attr Chg Db
Change Trap

Event
Subtype

isis Circ isis Circ Level


Attr Chg Db
Level
Attr Chg Change Trap
Db
Change
Trap

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

tem Isis If L1
Offline Trap

Event Source
(IMO Name)

tem Isis
If L1
Offline
Trap

Event
Type

Expedites
Polling

tem Isis If L1
Offline Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-458

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

isis Glbl Admin


State Chg Db
Change Trap

isis Glbl
Admin
State
Chg Db
Change
Trap

isis Glbl
Admin State
Chg Db
Change Trap

IManagedEle F
ment

Info F

isis Glbl Admin


State Chg Db
Change Trap

isis Glbl
Admin
State
Chg Db
Change
Trap

isis Glbl
Admin State
Chg Db
Change Trap

IManagedEle F
ment

wrn F

isis Glbl Admin


State Chg Db
Change Trap

isis Glbl
Admin
State
Chg Db
Change
Trap

isis Glbl
Admin State
Chg Db
Change Trap

IManagedEle F
ment

wrn F

isis Glbl Attr Chg isis Glbl


Db Change Trap Attr Chg

isis Glbl Attr


Chg Db
Change Trap

IManagedEle F
ment

wrn F

Db
Change
Trap

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

isis Circ Clear


Action Trap

Event Source
(IMO Name)

isis Circ
Clear
Action
Trap

Event
Type

Expedites
Polling

isis Circ Clear


Action Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

isis Glbl Level


Attr Chg Db
Change Trap

isis Glbl isis Glbl Level


Attr Chg Db
Level
Attr Chg Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

isis Glbl Clear


Action Trap

isis Glbl
Clear
Action
Trap

isis Glbl Clear


Action Trap

IManagedEle F
ment

wrn F

isis Area Add


Trap

isis Area isis Area Add


Add Trap Trap

IManagedEle F
ment

wrn F

isis Area Del


Trap

isis Area isis Area Del


Del Trap Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-459

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

isis Redist Attr


Chg Trap

isis Redist Attr N


isis
Chg Trap
Redist
Attr Chg
Trap

IManagedEle F
ment

wrn F

isis Redist Del


Trap

isis
isis Redist Del
Redist
Trap
Del Trap

IManagedEle F
ment

wrn F

isis Summ Add


Trap

isis
isis Summ Add N
Summ
Trap
Add Trap

IManagedEle F
ment

wrn F

isis Summ Attr


Chg Db Change
Trap

isis Summ Attr N


isis
Chg Db
Summ
Attr Chg Change Trap
Db
Change
Trap

IManagedEle F
ment

wrn F

isis Summ Del


Trap

isis
isis Summ Del
Summ
Trap
Del Trap

IManagedEle F
ment

wrn F

isis Circ Online


Trap

isis Circ
Online
Trap

isis Circ
Online Trap

IManagedEle F
ment

Info F

isis Circ Offline


Trap

isis Circ
Offline
Trap

isis Circ
Offline Trap

IManagedEle F
ment

wrn F

isis Glbl Online


Trap

isis Glbl
Online
Trap

isis Glbl
Online Trap

IManagedEle F
ment

Info F

isis Glbl Offline


Trap

isis Glbl
Offline
Trap

isis Glbl
Offline Trap

IManagedEle F
ment

wrn F

isis Hello Auth


Fail Trap

isis Hello isis Hello Auth N


Auth Fail Fail Trap
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

isis Adj Rejected isis Adj


Trap
Rejected

Event
Subtype
isis Adj
Rejected Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

isis
isis Redist Add N
Redist
Trap
Add Trap

Event
Type

Expedites
Polling

isis Redist Add


Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-460

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

isis L1 Dis Chg


Trap

isis L1
Dis Chg
Trap

isis L1 Dis Chg N


Trap

IManagedEle F
ment

wrn F

isis L2 Dis Chg


Trap

isis L2
Dis Chg
Trap

isis L2 Dis Chg N


Trap

IManagedEle F
ment

wrn F

isis Nbr State


Chg Trap

isis Nbr isis Nbr State


State
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

isis Glbl Auth


Fail Trap

isis Glbl isis Glbl Auth


Auth Fail Fail Trap
Trap

IManagedEle F
ment

wrn F

isis Area
Mismatch Trap

isis Area isis Area


N
Mismatc Mismatch Trap
h Trap

IManagedEle F
ment

wrn F

isis Attach
N
State Chg Trap

IManagedEle F
ment

wrn F

isis Attach State isis


Chg Trap
Attach

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

isis Id Len
Mismatches
Trap

Event Source
(IMO Name)

isis Id
Len
Mismatc
hes Trap

Event
Type

Expedites
Polling

isis Id Len
Mismatches
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

State
Chg Trap
isis Max Area
Addr Mismatch
Trap

isis Max
Area
Addr
Mismatc
h Trap

isis Max Area N


Addr
Mismatch Trap

IManagedEle F
ment

wrn F

isis L1 Db
Overload State
Chg Trap

isis L1 Db
N
isis L1
Overload State
Db
Overload Chg Trap
State
Chg Trap

IManagedEle F
ment

wrn F

isis L2 Db
Overload State
Chg Trap

isis L2 Db
N
isis L2
Overload State
Db
Overload Chg Trap
State
Chg Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-461

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

isis Corr Lsp


Detected Trap

isis Corr isis Corr Lsp


Detected Trap
Lsp
Detected
Trap

IManagedEle F
ment

wrn F

isis Att To Exc


Max Seq
Number Trap

isis Att To Exc N


isis Att
Max Seq
To Exc
Max Seq Number Trap
Number
Trap

IManagedEle F
ment

wrn F

isis Seq Num


Skip Trap

isis Seq
Num
Skip
Trap

isis Seq Num


Skip Trap

IManagedEle F
ment

wrn F

isis Own Lsp


Purge Trap

isis Own isis Own Lsp


Purge Trap
Lsp
Purge
Trap

IManagedEle F
ment

wrn F

mpls Path Add


Trap

mpls Path Add N


mpls
Path Add Trap
Trap

IManagedEle F
ment

wrn F

mpls Path Del


Trap

mpls
Path Del
Trap

mpls Path Del


Trap

IManagedEle F
ment

wrn F

mpls Path Ch
Trap

mpls
Path Ch
Trap

mpls Path Ch
Trap

IManagedEle F
ment

wrn F

mpls Hop Add


Trap

mpls
mpls Hop Add
Hop Add Trap
Trap

IManagedEle F
ment

wrn F

mpls Hop Syn


Trap

mpls
Hop Syn
Trap

mpls Hop Syn


Trap

IManagedEle F
ment

wrn F

mpls Hop Chg


Trap

mpls
mpls Hop Chg
Hop Chg Trap
Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

isis Man Area


Drop From
Area Trap

Event Source
(IMO Name)

isis Man
Area
Drop
From
Area
Trap

Event
Type

Expedites
Polling

isis Man Area


Drop From Area
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-462

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

mpls Attri
Changed Trap

mpls Attri
mpls
Changed Trap
Attri
Changed
Trap

IManagedEle F
ment

wrn F

mpls Global
Changed Trap

mpls Global
mpls
Changed Trap
Global
Changed
Trap

IManagedEle F
ment

wrn F

mpls Lsp Glbl


Attr Chg Trap

mpls Lsp mpls Lsp Glbl


Glbl Attr Attr Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

mpls Rsvp Intf


Add Trap

mpls
mpls Rsvp Intf N
Rsvp Intf Add Trap
Add Trap

IManagedEle F
ment

wrn F

mpls Rsvp Intf


Del Trap

mpls
mpls Rsvp Intf N
Rsvp Intf Del Trap
Del Trap

IManagedEle F
ment

wrn F

mpls Rsvp Intf


Attr Chg Trap

mpls Rsvp Intf N


mpls
Rsvp Intf Attr Chg Trap
Attr Chg
Trap

IManagedEle F
ment

wrn F

mpls Rsvp Glbl


Attr Chg Trap

mpls Rsvp Glbl N


mpls
Attr Chg Trap
Rsvp
Glbl Attr
Chg Trap

IManagedEle F
ment

wrn F

rt In Max Rt Max rt In Max rt In Max Rt


N
Threshold Trap Rt Max
Max Threshold

IManagedEle F
ment

wrn F

IManagedEle F
ment

Info F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

mpls Lsr mpls Lsr Id


Changed Trap
Id
Changed
Trap

Event
Type

Expedites
Polling

mpls Lsr Id
Changed Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Threshol Trap
d Trap
rt In Max Rt Min rt In Max rt In Max Rt
Threshold Trap Rt Min
Min Threshold

Threshol Trap
d Trap
rt In Max Rt
Exceed Action
Trap

rt In Max rt In Max Rt
Exceed Action
Rt
Trap
Exceed
Action
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-463

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

Info F

rt In Add Trap

rt In Add rt In Add Trap


Trap

IManagedEle F
ment

wrn F

rt In Del Trap

rt In Del
Trap

rt In Del Trap

IManagedEle F
ment

wrn F

rt In Attr Chg Db
Change Trap

rt In Attr rt In Attr Chg


Chg Db Db Change
Trap
Change
Trap

IManagedEle F
ment

wrn F

rt In Admin Chg
Trap

rt In
rt In Admin
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

Info F

rt In Admin Chg
Trap

rt In
rt In Admin
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

rt In Admin Chg
Trap

rt In
rt In Admin
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

rt In Oper Up
Trap

rt In
Oper Up
Trap

rt In Oper Up
Trap

IManagedEle F
ment

Info F

rt In Oper Down
Trap

rt In
Oper
Down
Trap

rt In Oper
Down Trap

IManagedEle F
ment

wrn F

br In Add Trap

br In Add br In Add Trap N


Trap

IManagedEle F
ment

wrn F

br In Del Trap

br In Del br In Del Trap


Trap

IManagedEle F
ment

wrn F

br In Attr Chg Db br In Attr br In Attr Chg


Change Trap
Chg Db Db Change

IManagedEle F
ment

wrn F

IManagedEle F
ment

Info F

Change
Trap
br In Admin Chg
Trap

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

rt In Max rt In Max Rt
Exceed Clear
Rt
Trap
Exceed
Clear
Trap

Expedites
Polling

rt In Max Rt
Exceed Clear
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap

br In
br In Admin
Admin
Chg Trap
Chg Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-464

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

br In Admin Chg
Trap

br In
br In Admin
Admin
Chg Trap
Chg Trap

IManagedEle F
ment

wrn F

br In Oper Up
Trap

br In
Oper Up
Trap

br In Oper Up
Trap

IManagedEle F
ment

Info F

br In Oper
Down Trap

IManagedEle F
ment

criti F
cal

br In PE Add Trap br In PE

IManagedEle F
ment

wrn F

br In PE Del Trap br In PE

br In PE Del
Del Trap Trap

IManagedEle F
ment

wrn F

br In PE br In PE Attr
Attr Chg Chg Db
Change Trap
Db
Change
Trap

IManagedEle F
ment

br-In-PE-Admi N
n-Chg-V2Trap

IManagedEle F
ment

info F

br-In-PE-Admi N
n-Chg-V2Trap

IManagedEle F
ment

wrn F

br-In-PE-Admi N
n-Chg-V2Trap

IManagedEle F
ment

wrn F

br-In-PE-Oper- N
Up-V2Trap

IManagedEle F
ment

info F

br In Oper Down br In
Trap
Oper

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

br In
br In Admin
Admin
Chg Trap
Chg Trap

Event
Type

Expedites
Polling

br In Admin Chg
Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Down
Trap
br In PE Add
Add Trap Trap

br-In-PE-Admin- br-In-PE
Chg-V2Trap
-Admin-

Chg-V2
Trap
br-In-PE-Admin- br-In-PE
Chg-V2Trap
-Admin-

Chg-V2
Trap
br-In-PE-Admin- br-In-PE
Chg-V2Trap
-Admin-

Chg-V2
Trap
br-In-PE-Oper-U br-In-PE
p-V2Trap
-Oper-U

p-V2Tra
p

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-465

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

br-In-PE-St-Mac br-In-PE br-In-PE-St-M N


-Del-V2Trap
-St-Mac- ac-Del-V2Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear
F

Severity

Weight
0

Activate
Flow

br-In-PE-Oper- N
Down-V2Trap

Event Source
(IMO Name)

Event
Type

br-In-PE-Oper-D br-In-PE
own-V2Trap
-Oper-D

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

own-V2
Trap
br-In-PE-St-Mac br-In-PE br-In-PE-St-M
-Add-V2Trap
-St-Mac- ac-Add-V2Tra

Add-V2
Trap

Del-V2T
rap
br-In-St-Mac-Ad br-In-Std-V2Trap
Mac-Ad

br-In-St-MacAdd-V2Trap

IManagedEle F
ment

wrn F

br-In-St-MacDel-V2Trap

IManagedEle F
ment

wrn F

eth-Oam-New-R eth-Oam eth-Oam-New- N


emote-Mep-V2T -New-Re Remote-Meprap
mote-Me V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

maj F

eth-Oam-Remot eth-Oam eth-Oam-Rem N


e-Mep-CCRestor -Remote- ote-Mep-CCRe
ed-V2Trap
Mep-CC stored-V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

d-V2Tra
p
br-In-St-Mac-De br-In-Stl-V2Trap
Mac-Del

-V2Trap

p-V2Tra
p
eth-Oam-Remot
e-Mep-LossOfC
C-V2Trap

eth-Oam eth-Oam-Rem
-Remote- ote-Mep-Loss
Mep-Los OfCC-V2Trap
sOfCCV2Trap

Restored
-V2Trap
br-In-Map-Stp-V br-In-Ma br-In-Map-Stp- N
2Trap
p-Stp-V2 V2Trap

Trap
br-In-Unmap-Stp br-In-Un br-In-Unmap-S N
-V2Trap
map-Stp- tp-V2Trap

V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-466

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Brg-Low-Th-V2T Brg-Low Brg-Low-Th-V N


rap
-Th-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Brg-High-ThV2Trap

Activate
Flow

Brg-Hig
h-Th-V2
Trap

Event Source
(IMO Name)

IManagedEle F
ment

Brg-High-Th-V2
Trap

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

rap
Brg-Rlrn-Th-V2T Brg-Rlrn Brg-Rlrn-Th-V N
rap
-Th-V2T 2Trap

rap
Brg-Mx-Mac-Th Brg-Mx-V2Trap
Mac-Th-

Brg-Mx-MacTh-V2Trap

IManagedEle F
ment

wrn F

Br-In-Dup-MacV2Trap

Br-In-Du Br-In-Dup-Ma
p-Mac-V c-V2Trap
2Trap

IManagedEle F
ment

wrn F

stp-In-Add-V2Tr
ap

stp-In-A
dd-V2Tr
ap

stp-In-Add-V2 N
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

stp-Mst-Add-V N
2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

stp-Mst-Attr-Ch
g-V2Trap

stp-Mst- stp-Mst-Attr-C N
Attr-Chg hg-V2Trap
-V2Trap

IManagedEle F
ment

wrn F

stp-Port-Attr-Ch
g-V2Trap

stp-Port- stp-Port-Attr-C N
Attr-Chg hg-V2Trap
-V2Trap

IManagedEle F
ment

wrn F

V2Trap

stp-In-Del-V2Tra stp-In-D stp-In-Del-V2


p
el-V2Tra Trap

p
stp-In-Attr-ChgV2Trap

stp-In-At stp-In-Attr-Ch
tr-Chg-V g-V2Trap
2Trap

stp-In-Admin-Ch stp-In-A
g-V2Trap
dmin-Ch

stp-In-AdminChg-V2Trap

g-V2Tra
p
stp-Mst-Add-V2
Trap

stp-MstAdd-V2
Trap

stp-Mst-Del-V2T stp-Mst- stp-Mst-Del-V


rap
Del-V2T 2Trap

rap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-467

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto Clear

Auto
Remove

Flapping

wrn F

hange-V
2Trap

IManagedEle F
ment

info F

stp-Port-Offlin N
e-V2Trap

IManagedEle F
ment

wrn F

stp-Port-RoleS N
tate-Change-V
2Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Weight
0

Severity

Is Correlation
Allowed
F

stp-Port-BpduEx stp-Port- stp-Port-Bpdu N


change-V2Trap BpduExc Exchange-V2T

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

rap

stp-Port-Online- stp-Port- stp-Port-Onlin


V2Trap
Online-V e-V2Trap

2Trap
stp-Port-Offline- stp-PortV2Trap
Offline-

V2Trap
stp-Port-RoleSta stp-Portte-Change-V2Tr RoleStat
ap
e-Chang

e-V2Tra
p
Stp-Port-Del

Stp-Port- Stp-Port-Del
Del

IManagedEle F
ment

wrn F

New-Re-Mep

New-Re- New-Re-Mep
Mep

IManagedEle F
ment

wrn F

Re-Mep-Loc

Re-Mep- Re-Mep-Loc
Loc

IManagedEle F
ment

wrn F

Re-Mep-Back

Re-Mep- Re-Mep-Back
Back

IManagedEle F
ment

wrn F

Md-Add

Md-Add

Md-Add

IManagedEle F
ment

wrn F

Md-Del

Md-Del

Md-Del

IManagedEle F
ment

wrn F

Ma-Atr-Chg

IManagedEle F
ment

wrn F

Ma-Atr-Chg

Ma-AtrChg
Ma-Add

Ma-Add

Ma-Add

IManagedEle F
ment

wrn F

Ma-Del

Ma-Del

Ma-Del

IManagedEle F
ment

wrn F

Mep-Atr-Chg

Mep-Atr
-Chg

Mep-Atr-Chg

IManagedEle F
ment

wrn F

Mep-Add

Mep-Ad
d

Mep-Add

IManagedEle F
ment

wrn F

Mep-Del

Mep-Del Mep-Del

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-468

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ext-Glb-Chg

Ext-Glb- Ext-Glb-Chg
Chg

IManagedEle F
ment

wrn F

qos-Group-AddV2Trap

qos-Grou qos-Group-Ad
p-Add-V d-V2Trap
2Trap

IManagedEle F
ment

wrn F

qos-Group-DelV2Trap

qos-Grou qos-Group-Del N
p-Del-V -V2Trap
2Trap

IManagedEle F
ment

wrn F

qos-Group-ChgV2Trap

qos-Grou qos-Group-Ch
p-Chg-V g-V2Trap
2Trap

IManagedEle F
ment

wrn F

br-Dot1p-In-Map br-Dot1p br-Dot1p-In-M N


-Attr-Change-V2 -In-Map- ap-Attr-Chang
Trap
Attr-Cha e-V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

qos-TP-Delete
d-V2Trap

IManagedEle F
ment

wrn F

qos-TP-Attr-C
hange-V2Trap

IManagedEle F
ment

wrn F

qos-TP-Ladde
d-V2Trap

IManagedEle F
ment

wrn F

qos-TPL-Delet N
ed-V2Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

Ext-Ma-Chg

Event Source
(IMO Name)

Ext-MaChg

Event
Type

Expedites
Polling

Ext-Ma-Chg

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

nge-V2T
rap
br-Dot1p-Out-M br-Dot1p br-Dot1p-Outap-Attr-Change- -Out-Ma Map-Attr-Cha
V2Trap
p-Attr-C nge-V2Trap

hange-V
2Trap
qos-TP-Added-V qos-TP- qos-TP-Added
2Trap
Added-V -V2Trap

2Trap
qos-TP-Deleted- qos-TPV2Trap
Deleted-

V2Trap
qos-TP-Attr-Cha qos-TPnge-V2Trap
Attr-Cha

nge-V2T
rap
qos-TP-LaddedV2Trap

qos-TPLaddedV2Trap

qos-TPL-Deleted qos-TPL
-V2Trap
-Deleted

-V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-469

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

qos-TPL-Rule-D
eleted-V2Trap

qos-TPL qos-TPL-Rule- N
-Rule-De Deleted-V2Tra
leted-V2 p
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

qos-TPL-Rule- N
Attr-Change-V
2Trap

IManagedEle F
ment

wrn F

pcm-Ppg-Grp-A
dded-V2Trap

pcm-Ppg pcm-Ppg-Grp- N
-Grp-Ad Added-V2Trap
ded-V2T
rap

IManagedEle F
ment

wrn F

pcm-Ppg-Grp-D
eleted-V2Trap

pcm-Ppg pcm-Ppg-Grp- N
-Grp-Del Deleted-V2Tra
eted-V2 p
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm-Ppg pcm-Ppg-Grp- N
-Grp-Onl Online-V2Trap
ine-V2Tr
ap

IManagedEle F
ment

info F

IManagedEle F
ment

wrn F

Event
Subtype

qos-Dscp-Map- qos-Dscp qos-Dscp-Map


Out-Attr-Change -Map-Ou -Out-Attr-Cha
-V2Trap
t-Attr-Ch nge-V2Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

qos-TPL qos-TPL-Rule- N
-Rule-Ad Added-V2Trap
ded-V2T
rap

Expedites
Polling

qos-TPL-Rule-A
dded-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ange-V2
Trap
qos-TPL-Rule-At qos-TPL
tr-Change-V2Tra -Rule-At
p
tr-Chang

e-V2Tra
p

pcm-Ppg-Grp-At pcm-Ppg pcm-Ppg-Grptr-ChgDb-Chang -Grp-Att Attr-ChgDb-C


e-V2Trap
r-ChgDb hange-V2Trap

-ChangeV2Trap
pcm-Ppg-Grp-O
nline-V2Trap

pcm-Ppg-Grp-Of pcm-Ppg pcm-Ppg-Grpfline-V2Trap


-Grp-Off Offline-V2Tra

line-V2T p
rap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-470

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm-Ppg-Chn-D
eleted-V2Trap

pcm-Ppg pcm-Ppg-Chn- N
-Chn-Del Deleted-V2Tra
eted-V2 p
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm-Ppg-Chn-S pcm-Ppg pcm-Ppg-Chn- N


woDbChange-V2 -Chn-Sw SwoDbChange
Trap
oDbCha -V2Trap

IManagedEle F
ment

wrn F

traffic-Fi traffic-Filter-A N
lter-Add dded-V2Trap
ed-V2Tr
ap

IManagedEle F
ment

wrn F

traffic-Filter-Del traffic-Fi traffic-Filter-D N


eted-V2Trap
lter-Dele eleted-V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

pcm-Ppg-Chn-At pcm-Ppg pcm-Ppg-Chntr-ChgDb-Chang -Chn-Att Attr-ChgDb-C


e-V2Trap
r-ChgDb hange-V2Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

pcm-Ppg pcm-Ppg-Chn- N
-Chn-Ad Added-V2Trap
ded-V2T
rap

Expedites
Polling

pcm-Ppg-Chn-A
dded-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

-ChangeV2Trap

nge-V2T
rap
traffic-Filter-Ad
ded-V2Trap

ted-V2Tr
ap
traffic-Filter-Attr traffic-Fi traffic-Filter-A N
-Change-V2Trap lter-Attr- ttr-Change-V2

ChangeV2Trap

Trap

traffic-Filter-Rul traffic-Fi traffic-Filter-R


e-Added-V2Trap lter-Rule ule-Added-V2

-AddedV2Trap

Trap

traffic-Filter-Rul traffic-Fi traffic-Filter-R


e-Deleted-V2Tra lter-Rule ule-Deleted-V
p
-Deleted 2Trap

-V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-471

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm-Ima pcm-Ima-Adde N
-Added- d-V2Trap
V2Trap

IManagedEle F
ment

wrn F

pcm-Ima-Delete pcm-Ima pcm-Ima-Delet N


d-V2Trap
-Deleted ed-V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm-Ima-Admin
-Chg-V2Trap

pcm-Ima pcm-Ima-Adm N
-Admin- in-Chg-V2Trap
Chg-V2
Trap

IManagedEle F
ment

info F

pcm-Ima-Admin
-Chg-V2Trap

pcm-Ima pcm-Ima-Adm N
-Admin- in-Chg-V2Trap
Chg-V2
Trap

IManagedEle F
ment

wrn F

pcm-Ima-Admin
-Chg-V2Trap

pcm-Ima pcm-Ima-Adm N
-Admin- in-Chg-V2Trap
Chg-V2
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

info F

pcm-Ima-Link-A pcm-Ima pcm-Ima-Link- N


dded-V2Trap
-Link-Ad Added-V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

traffic-Filter-Rul traffic-Fi traffic-Filter-R


e-Mirr-Attr-Chg- lter-Rule ule-Mirr-AttrV2Trap
-Mirr-Att Chg-V2Trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

r-Chg-V
2Trap
pcm-Ima-Added
-V2Trap

-V2Trap
pcm-Ima-Attr-Ch pcm-Ima pcm-Ima-AttrgDb-Change-V2 -Attr-Ch ChgDb-Chang
Trap
gDb-Cha e-V2Trap

nge-V2T
rap

pcm-Ima-Online pcm-Ima pcm-Ima-Onli


-V2Trap
-Online- ne-V2Trap

V2Trap

ded-V2T
rap
pcm-Ima-Link-D pcm-Ima pcm-Ima-Link- N
eleted-V2Trap
-Link-De Deleted-V2Tra

leted-V2
Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-472

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm-Ima-Gr-Cfg
-Abort-V2Trap

pcm-Ima pcm-Ima-Gr-C N
-Gr-Cfg- fg-Abort-V2Tr
Abort-V ap
2Trap

IManagedEle F
ment

wrn F

pcm-Ima-Gr-Cfg
-Abort-Fe-V2Tra
p

pcm-Ima pcm-Ima-Gr-C N
-Gr-Cfg- fg-Abort-Fe-V
Abort-Fe 2Trap
-V2Trap

IManagedEle F
ment

wrn F

pcm-Ima-Gr-Ins
uffLinks-V2Trap

pcm-Ima pcm-Ima-Gr-In N
-Gr-Insuf suffLinks-V2T
fLinks-V rap
2Trap

IManagedEle F
ment

wrn F

pcm-Ima-Gr-Ins pcm-Ima pcm-Ima-Gr-In N


uffLinks-Fe-V2Tr -Gr-Insuf suffLinks-Feap
fLinks-F V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

maj F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling

pcm-Ima pcm-Ima-Gr-St N
-Gr-Start artup-Fe-V2Tr
up-Fe-V ap
2Trap

Event
Subtype

pcm-Ima-Gr-Sta
rtup-Fe-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

e-V2Tra
p
pcm-Ima-Gr-Blo pcm-Ima pcm-Ima-Gr-B N
cked-Fe-V2Trap -Gr-Bloc locked-Fe-V2T

ked-FeV2Trap

rap

pcm-Ima-Gr-Tim pcm-Ima pcm-Ima-Gr-Ti N


ing-Sync-V2Trap -Gr-Timi ming-Sync-V2

ng-Sync- Trap
V2Trap
pcm-Ima-Gr-GT pcm-Ima pcm-Ima-Gr-G N
SM-Down-V2Tra -Gr-GTS TSM-Down-V
p
M-Down 2Trap

-V2Trap
pcm-Ima-Gr-XC- pcm-Ima pcm-Ima-Gr-X N
Alarm-V2Trap
-Gr-XC- C-Alarm-V2Tr

Alarm-V ap
2Trap
pcm-Ima-Gr-Uas pcm-Ima pcm-Ima-Gr-U N
-V2Trap
-Gr-Uas- as-V2Trap

V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-473

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

info F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm-Ima-LnkTx- pcm-Ima pcm-Ima-LnkT N


MisCon-V2Trap -LnkTx- x-MisCon-V2

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

pcm-Ima-LnkTx- pcm-Ima pcm-Ima-LnkT N


Fault-V2Trap
-LnkTx- x-Fault-V2Tra

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear
F

Severity

Weight
0

Activate
Flow

pcm-Ima-Gr-All- pcm-Ima pcm-Ima-Gr-A N


LnkDown-V2Tra -Gr-All- ll-LnkDown-V
p
LnkDow 2Trap

Event Source
(IMO Name)

Event
Type

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

n-V2Tra
p
pcm-Ima-LnkOnl pcm-Ima pcm-Ima-Lnk N
ine-V2Trap
-LnkOnli Online-V2Trap

ne-V2Tr
ap
pcm-Ima-LnkLif- pcm-Ima pcm-Ima-LnkL N
V2Trap
-LnkLif- if-V2Trap

V2Trap
pcm-Ima-LnkLod pcm-Ima pcm-Ima-LnkL N
s-V2Trap
-LnkLod ods-V2Trap

s-V2Tra
p
pcm-Ima-LnkRfi- pcm-Ima pcm-Ima-Lnk
V2Trap
-LnkRfi- Rfi-V2Trap

V2Trap

MisCon- Trap
V2Trap
pcm-Ima-LnkRx- pcm-Ima pcm-Ima-Lnk
MisCon-V2Trap -LnkRx- Rx-MisCon-V

MisCon- 2Trap
V2Trap

Fault-V2 p
Trap
pcm-Ima-LnkRx- pcm-Ima pcm-Ima-Lnk N
Fault-V2Trap
-LnkRx- Rx-Fault-V2Tr

Fault-V2 ap
Trap
pcm-Ima-LnkTx
Unuse-Fe-V2Tra
p

pcm-Ima pcm-Ima-LnkT N
-LnkTxU xUnuse-Fe-V2
nuse-Fe- Trap
V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-474

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

pcm-Ima-LnkUa
s-V2Trap

pcm-Ima pcm-Ima-Lnk
-LnkUas Uas-V2Trap
-V2Trap

IManagedEle F
ment

min F

pcm-Ima-LnkUa
s-Fe-V2Trap

pcm-Ima pcm-Ima-Lnk
-LnkUas Uas-Fe-V2Tra
-Fe-V2T p
rap

IManagedEle F
ment

wrn F

pcm-Ima-LnkNot pcm-Ima pcm-Ima-Lnk


Act-V2Trap
-LnkNot NotAct-V2Tra

IManagedEle F
ment

min F

pcm-Ima pcm-Ima-Lnk N
-LnkAttr Attr-Chg-V2Tr
-Chg-V2 ap
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Vcg-GrAdmChV2Trap

Vcg-Gr-AdmC N
h-V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-Onlin-V2 Vcg-GrTrap
Onlin-V

Vcg-Gr-Onlin- N
V2Trap

IManagedEle F
ment

wrn F

Vcg-Mbr Vcg-Mbr-Add- N
-Add-V2 V2Trap
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event
Type

Event Source
(IMO Name)

pcm-Ima pcm-Ima-Lnk N
-LnkRx RxUnuse-Fe-V
Unuse-F 2Trap
e-V2Tra
p

Expedites
Polling

pcm-Ima-LnkRx
Unuse-Fe-V2Tra
p

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Act-V2T p
rap
pcm-Ima-LnkAtt
r-Chg-V2Trap

Vcg-Gr-Add-V2T Vcg-Grrap
Add-V2

Vcg-Gr-Add-V N
2Trap

Trap
Vcg-Gr-Del-V2Tr Vcg-Gr- Vcg-Gr-Del-V
ap
Del-V2T 2Trap

rap
Vcg-Gr-AtrCh-V2 Vcg-GrTrap
AtrCh-V

Vcg-Gr-AtrCh
-V2Trap

2Trap
Vcg-Gr-AdmChV2Trap

2Trap
Vcg-Mbr-Add-V
2Trap

Vcg-Mbr-Del-V2 Vcg-Mbr Vcg-Mbr-DelTrap


-Del-V2 V2Trap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-475

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Vcg-Gr-SqmV2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event Source
(IMO Name)

Vcg-Gr-LomV2Trap

Expedites
Polling

Is Correlation
Allowed

Vcg-Gr-Lom-V2T Vcg-Grrap
Lom-V2

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

Trap
Vcg-Gr-Sqm-V2T Vcg-Grrap
Sqm-V2

Trap
Vcg-Gr-Loa-V2Tr Vcg-Gr- Vcg-Gr-Loa-V
ap
Loa-V2T 2Trap

rap
Vcg-Gr-Lfd-V2Tr Vcg-Gr- Vcg-Gr-Lfd-V
ap
Lfd-V2T 2Trap

rap
Vcg-Gr-Locs-V2
Trap

Vcg-GrLocs-V2
Trap

Vcg-Gr-LocsV2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-Loccs-V
2Trap

Vcg-GrLoccs-V
2Trap

Vcg-Gr-Loccs- N
V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-Xconn-V Vcg-Gr- Vcg-Gr-Xconn N


2Trap
Xconn-V -V2Trap

IManagedEle F
ment

wrn F

2Trap
Vcg-Gr-MbrDnV2Trap

Vcg-GrMbrDnV2Trap

Vcg-Gr-MbrD
n-V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-MAtChV2Trap

Vcg-GrMAtChV2Trap

Vcg-Gr-MAtC
h-V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-MisM-V
2Trap

Vcg-GrMisM-V
2Trap

Vcg-Gr-MisM- N
V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-FLoC-V2
Trap

Vcg-GrFLoC-V
2Trap

Vcg-Gr-FLoC- N
V2Trap

IManagedEle F
ment

wrn F

Vcg-Gr-InfEv-V2
Trap

Vcg-Gr-I Vcg-Gr-InfEv- N
nfEv-V2 V2Trap
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Vcg-Pt-AtrCh-V2 Vcg-PtTrap
AtrCh-V

Vcg-Pt-AtrCh- N
V2Trap

2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-476

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ont-Sf-V2Trap

Ont-Sf-V Ont-Sf-V2Trap N
2Trap

IManagedEle F
ment

wrn F

Ont-Sd-V2Trap

Ont-SdV2Trap

IManagedEle F
ment

wrn F

Ont-Lof-V2Trap

Ont-Lof- Ont-Lof-V2Tra N
V2Trap p

IManagedEle F
ment

wrn F

Ont-Lcd-V2Trap

Ont-Lcd- Ont-Lcd-V2Tr
V2Trap ap

IManagedEle F
ment

wrn F

Ont-Cpe-V2Trap

Ont-Cpe- Ont-Cpe-V2Tr
V2Trap ap

IManagedEle F
ment

wrn F

Ont-Loa-V2Trap

Ont-Loa- Ont-Loa-V2Tr
V2Trap ap

IManagedEle F
ment

wrn F

Ont-Dg-V2Trap

Ont-DgV2Trap

Ont-Dg-V2Tra N
p

IManagedEle F
ment

wrn F

Ont-Oaml-V2Tra
p

Ont-Oam Ont-Oaml-V2
l-V2Trap Trap

IManagedEle F
ment

wrn F

Ont-Rdi-V2Trap

Ont-Rdi- Ont-Rdi-V2Tra N
V2Trap p

IManagedEle F
ment

wrn F

Ont-Suf-V2Trap

Ont-Suf- Ont-Suf-V2Tra N
V2Trap p

IManagedEle F
ment

wrn F

Ont-Sdf-V2Trap

Ont-Sdf- Ont-Sdf-V2Tra N
V2Trap p

IManagedEle F
ment

wrn F

Ont-Mea-V2Trap Ont-Mea Ont-Mea-V2Tr N

IManagedEle F
ment

wrn F

-V2Trap

Event
Subtype
Ont-Sd-V2Tra
p

ap

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Event
Type

Event Source
(IMO Name)

Ont-Los- Ont-Los-V2Tr
V2Trap ap

Expedites
Polling

Ont-Los-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Unexp-Ont-V2Tr
ap

Unexp-O Unexp-Ont-V2 N
nt-V2Tra Trap
p

IManagedEle F
ment

wrn F

Ont-Oor-V2Trap

Ont-Oor- Ont-Oor-V2Tr
V2Trap ap

IManagedEle F
ment

wrn F

MEM-V2Trap

MEM-V
2Trap

IManagedEle F
ment

wrn F

Activated-V2T N
rap

IManagedEle F
ment

wrn F

DeActive-V2T N
rap

IManagedEle F
ment

wrn F

Activated-V2Tra Activate
p
d-V2Tra

MEM-V2Trap

p
DeActive-V2Tra
p

DeActiv
e-V2Tra
p

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-477

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

LossOfkey-V2Tr
ap

LossOfk
ey-V2Tr
ap

LossOfkey-V2
Trap

IManagedEle F
ment

wrn F

Ont-Added-V2Tr
ap

Ont-Add Ont-Added-V2 N
ed-V2Tr Trap
ap

IManagedEle F
ment

wrn F

Ont-Deleted-V2T Ont-Dele Ont-Deleted-V N


rap
ted-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Ont-AttrChg-V N
2Trap

IManagedEle F
ment

wrn F

Ont-PortEn-V2 N
Trap

IManagedEle F
ment

wrn F

Ont-PortDis-V N
2Trap

IManagedEle F
ment

wrn F

Ont-PortChgV2Trap

IManagedEle F
ment

wrn F

Ont-MltTest-V N
2Trap

IManagedEle F
ment

wrn F

Ont-DbdtTst-V2T Ont-Dbd Ont-DbdtTst-V N


rap
tTst-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

IManagedEle F
ment

Severity

Weight

Activate
Flow

RFUP-V2Trap

Event Source
(IMO Name)

RFUP-V
2Trap

Event
Type

Expedites
Polling

RFUP-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ap
Ont-Enable-V2Tr Ont-Ena Ont-Enable-V2 N
ap
ble-V2Tr Trap

ap
Ont-Disable-V2T Ont-Disa Ont-Disable-V
rap
ble-V2Tr 2Trap

ap
Ont-AttrChg-V2T Ont-Attr
rap
Chg-V2

Trap
Ont-PortEn-V2Tr Ont-Port
ap
En-V2Tr

ap
Ont-PortDis-V2T Ont-Port
rap
Dis-V2T

rap
Ont-PortChg-V2T Ont-Port
rap
Chg-V2

Trap
Ont-MltTest-V2T Ont-Mlt
rap
Test-V2

Trap

rap
Ont-ConnTst-V2
Trap

Ont-Con
nTst-V2
Trap

Ont-ConnTstV2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-478

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Ont-Mpc-V2Trap Ont-Mpc Ont-Mpc-V2Tr N

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Rogu-OntTst-V2
Trap

Rogu-On Rogu-OntTsttTst-V2T V2Trap


rap

Ont-RmtDbg-V2T Ont-Rmt
rap
Dbg-V2

Ont-EtLbTst-V N
2Trap

Ont-RmtDbgV2Trap

Is Ticketable

Auto Clear
F

Ont-EtL
bTst-V2
Trap

Severity

Weight
0

Ont-EtLbTst-V2T
rap

Activate
Flow

Event
Type

Event Source
(IMO Name)

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
-V2Trap

ap

Ont-DbaMis-V2T Ont-Dba Ont-DbaMis-V N


rap
Mis-V2T 2Trap

rap
Omcc-LinkFl-V2
Trap

Omcc-Li Omcc-LinkFlnkFl-V2 V2Trap


Trap

IManagedEle F
ment

wrn F

Ont-CatLos-V2Tr Ont-Cat Ont-CatLos-V


ap
Los-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Ont-CatOv-V2Tra Ont-Cat Ont-CatOv-V2 N


p
Ov-V2Tr Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

rap
Pon-CatLos-V2Tr Pon-Cat Pon-CatLos-V
ap
Los-V2T 2Trap

rap
Ont-CatSd-V2Tra Ont-CatS Ont-CatSd-V2
p
d-V2Tra Trap

p
Pon-CatSd-V2Tr
ap

Pon-Cat
Sd-V2Tr
ap

Pon-CatSd-V2
Trap

ap
Pon-CatOv-V2Tr
ap

Pon-Cat Pon-CatOv-V2 N
Ov-V2Tr Trap
ap

Dhcp-NoRs-V2Tr Dhcp-No Dhcp-NoRs-V


ap
Rs-V2Tr 2Trap

ap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-479

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Css-Crdn Css-Crdn-V2T N
-V2Trap rap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Css-SesErr-V2Tr Css-SesE Css-SesErr-V2 N


ap
rr-V2Tra Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Csr-Crdn-V2Trap Csr-Crdn Csr-Crdn-V2Tr N

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Csr-AuthErr-V2T Csr-Auth Csr-AuthErr-V N


rap
Err-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Dhcp-IncRs-V2T Dhcp-Inc Dhcp-IncRs-V


rap
Rs-V2Tr 2Trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ap
Css-Crdn-V2Tra
p

Css-TcpOse-V2T Css-Tcp Css-TcpOse-V


rap
Ose-V2T 2Trap

rap

p
Css-AuthErr-V2T Css-Auth Css-AuthErr-V N
rap
Err-V2Tr 2Trap

ap
Css-TmOut-V2Tr Css-Tm Css-TmOut-V
ap
Out-V2T 2Trap

rap
Css-SrvrFl-V2Tr
ap

Css-Srvr Css-SrvrFl-V2
Fl-V2Tra Trap
p
-V2Trap

ap

Csr-TcpOse-V2T Csr-Tcp Csr-TcpOse-V


rap
Ose-V2T 2Trap

rap
Csr-SesErr-V2Tr
ap

Csr-SesE Csr-SesErr-V2
rr-V2Tra Trap
p

ap
Csr-TmOut-V2Tr
ap

Csr-Tm Csr-TmOut-V2 N
Out-V2T Trap
rap

Csr-SrvrFl-V2Tra Csr-Srvr Csr-SrvrFl-V2


p
Fl-V2Tra Trap

p
Csr-MalDoc

Csr-Mal
Doc

Csr-MalDoc

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-480

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ua-TcpOse-V2Tr Ua-TcpO Ua-TcpOse-V2 N


ap
se-V2Tra Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Ua-Crdn
-V2Trap

Event Source
(IMO Name)

IManagedEle F
ment

Ua-Crdn-V2Trap

Event
Type

Expedites
Polling

Ua-Crdn-V2Tr N
ap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

p
Ua-SesErr-V2Tra Ua-SesE
p
rr-V2Tra

Ua-SesErr-V2
Trap

IManagedEle F
ment

wrn F

Ua-AuthErr-V2Tr Ua-Auth Ua-AuthErr-V


ap
Err-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

ap
Ua-TmOut-V2Tra Ua-TmO Ua-TmOut-V2
p
ut-V2Tra Trap

p
Ua-SrvrFl-V2Tra
p

Ua-SrvrF Ua-SrvrFl-V2
l-V2Trap Trap

Ont-EqFail-V2Tr
ap

Ont-EqF
ail-V2Tr
ap

Ont-EqFail-V2 N
Trap

IManagedEle F
ment

wrn F

Ont-PwAlm-V2T
rap

Ont-Pw
Alm-V2
Trap

Ont-PwAlm-V
2Trap

IManagedEle F
ment

wrn F

Ont-BatMis-V2T
rap

Ont-Bat Ont-BatMis-V
Mis-V2T 2Trap
rap

IManagedEle F
ment

wrn F

Ont-BatFl-V2Tra
p

Ont-BatF Ont-BatFl-V2
l-V2Trap Trap

IManagedEle F
ment

wrn F

Ont-BatLow-V N
2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Vds-NeL Vds-NeLof-V2 N
of-V2Tra Trap
p

IManagedEle F
ment

wrn F

Ont-BatLow-V2T Ont-Bat
rap
Low-V2

Trap
Ont-LanLos-V2Tr Ont-Lan Ont-LanLos-V
ap
Los-V2T 2Trap

rap
Ont-EthLp-V2Tra Ont-Eth
p
Lp-V2Tr

Ont-EthLp-V2
Trap

ap
Vds-NeLof-V2Tr
ap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-481

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Vds-LnFl-V2Trap Vds-LnF Vds-LnFl-V2T N

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Moc-ALpbk-V2T Moc-AL Moc-ALpbk-V N


rap
pbk-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear
F

Severity

Weight
0

Vds-NeLos-V2Tr Vds-NeL Vds-NeLos-V2 N


ap
os-V2Tr Trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ap
Vds-FeLos-V2Tr
ap

Vds-FeL Vds-FeLos-V2 N
os-V2Tr Trap
ap

Vds-FeLof-V2Tra Vds-FeL Vds-FeLof-V2


p
of-V2Tra Trap

p
Vds-FeLpr-V2Tra Vds-FeL Vds-FeLpr-V2
p
pr-V2Tra Trap

p
l-V2Trap rap
Vds-NeLol-V2Tr
ap

Vds-NeL Vds-NeLol-V2 N
ol-V2Tra Trap
p

Vds-FeLol-V2Tra Vds-FeL Vds-FeLol-V2


p
ol-V2Tra Trap

p
Moc-ALol-V2Tra Moc-AL Moc-ALol-V2
p
ol-V2Tra Trap

p
Moc-ALl-V2Trap Moc-ALl Moc-ALl-V2T

-V2Trap

rap

rap
Voice-Gsfa-V2Tr Voice-Gs Voice-Gsfa-V2 N
ap
fa-V2Tra Trap

p
Vdsl-Lpbk-V2Tra Vdsl-Lp
p
bk-V2Tr

Vdsl-Lpbk-V2
Trap

ap
Ext-Alm1-V2Tra
p

Ext-Alm
1-V2Tra
p

Ext-Alm1-V2T N
rap

IManagedEle F
ment

wrn F

Ext-Alm2-V2Tra
p

Ext-Alm
2-V2Tra
p

Ext-Alm2-V2T N
rap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-482

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ext-Alm4-V2Tra
p

Ext-Alm
4-V2Tra
p

Ext-Alm4-V2T N
rap

IManagedEle F
ment

wrn F

Ext-Alm5-V2Tra
p

Ext-Alm
5-V2Tra
p

Ext-Alm5-V2T N
rap

IManagedEle F
ment

wrn F

Alarm-Drop-V2T Alarm-D Alarm-Drop-V N


rap
rop-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Pon-RxPwrHi-V
2Trap

Pon-RxP Pon-RxPwrHi- N
wrHi-V2 V2Trap
Trap

IManagedEle F
ment

wrn F

bfd-SessionUpV2Trap

bfd-Sessi bfd-SessionUp N
onUp-V2 -V2Trap
Trap

IManagedEle F
ment

info F

IManagedEle F
ment

maj F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

bfd-IntfMod-V N
2Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

IManagedEle F
ment

Activate
Flow

Ext-Alm3-V2T N
rap

Event Source
(IMO Name)

Ext-Alm
3-V2Tra
p

Event
Type

Expedites
Polling

Ext-Alm3-V2Tra
p

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

rap
Ont-Rx-PwrLo-V Ont-Rx- Ont-Rx-PwrLo N
2Trap
PwrLo-V -V2Trap

2Trap
Pon-Rx-PwrLo-V Pon-Rx- Pon-Rx-PwrLo N
2Trap
PwrLo-V -V2Trap

2Trap
Ont-Rx-PwrHi-V Ont-Rx- Ont-Rx-PwrHi
2Trap
PwrHi-V -V2Trap

2Trap

bfd-SessionDow bfd-Sessi bfd-SessionDo


n-V2Trap
onDown- wn-V2Trap

V2Trap
bfd-SessAttrCha bfd-Sess bfd-SessAttrC
nge-V2Trap
AttrChan hange-V2Trap

ge-V2Tr
ap
bfd-IntfAdd-V2Tr bfd-Intf
ap
Add-V2

bfd-IntfAdd-V
2Trap

Trap
bfd-IntfMod-V2T bfd-Intf
rap
Mod-V2

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-483

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Bfd-SesBkChV2Trap

IManagedEle F
ment

wrn F

Ml-GrpUp-V2Tra Ml-GrpU Ml-GrpUp-V2


p
p-V2Tra Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Ml-DelLnk-V2Tr
ap

Ml-DelL Ml-DelLnk-V2 N
nk-V2Tr Trap
ap

IManagedEle F
ment

wrn F

Ml-CfgChg-V2Tr
ap

Ml-CfgC Ml-CfgChg-V
hg-V2Tr 2Trap
ap

IManagedEle F
ment

wrn F

Ml-GrpAdd-V2Tr Ml-GrpA Ml-GrpAdd-V


ap
dd-V2Tr 2Trap

IManagedEle F
ment

wrn F

Ml-GrpD Ml-GrpDel-V2 N
el-V2Tra Trap
p

IManagedEle F
ment

wrn F

Ml-GrAdmCh-V2 Ml-GrAd Ml-GrAdmCh- N


Trap
mCh-V2 V2Trap

IManagedEle F
ment

wrn F

Event
Subtype

bfd-SessMaxThr bfd-Sess bfd-SessMaxT


esh-V2Trap
MaxThre hresh-V2Trap

Is Ticketable

Auto Clear
F

Severity

Weight
0

Activate
Flow

bfd-Intf bfd-IntfDel-V2 N
Del-V2T Trap
rap

Event Source
(IMO Name)

bfd-IntfDel-V2Tr
ap

Event
Type

Expedites
Polling

IManagedEle F
ment

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

sh-V2Tr
ap
bfd-SessLowThr bfd-Sess bfd-SessLowT
esh-V2Trap
LowThre hresh-V2Trap

sh-V2Tr
ap
Bfd-SesPsCh-V2 Bfd-SesP Bfd-SesPsChTrap
sCh-V2T V2Trap

rap
Bfd-SesBkCh-V2 Bfd-Ses
Trap
BkCh-V

2Trap

p
Ml-GrpDown-V2 Ml-GrpD Ml-GrpDownTrap
own-V2 V2Trap

Trap
Ml-AddLnk-V2Tr Ml-Add Ml-AddLnk-V
ap
Lnk-V2T 2Trap

rap

ap
Ml-GrpDel-V2Tr
ap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-484

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Ml-LnkDownV2Trap

IManagedEle F
ment

wrn F

Ml-LnkChg-V2Tr Ml-LnkC Ml-LnkChg-V


ap
hg-V2Tr 2Trap

IManagedEle F
ment

wrn F

MirInsAddN
mirrInstAdd-V
2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

MirTarAdd-V2 N
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

MirTaAtrCh-V2T MirTaAt MirTaAtrCh-V N


rap
rCh-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

MirTarUp-V2T N
rap

IManagedEle F
ment

wrn F

MirTarDn-V2T N
rap

IManagedEle F
ment

wrn F

vrrp-MasSt-V2Tr vrrp-Mas vrrp-MasSt-V2 N


ap
St-V2Tra Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Ml-LnkUp-V2Tra Ml-Lnk
Ml-LnkUp-V2
p
Up-V2Tr Trap

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ap
Ml-LnkDown-V2 Ml-Lnk
Trap
Down-V

2Trap

ap
MirInsAddMirInsA
mirrInstAdd-V2T ddrap
mirrInst

Add-V2
Trap
MirInsDel-V2Tra MirInsD MirInsDel-V2
p
el-V2Tra Trap

p
MirTarAdd-V2Tr MirTarA
ap
dd-V2Tr

ap
MirTarDel-V2Tr
ap

MirTarD MirTarDel-V2
el-V2Tra Trap
p

rap
MirTaAdmCh-V2 MirTaAd MirTaAdmChTrap
mCh-V2 V2Trap

Trap
MirTarUp-V2Tra MirTarU
p
p-V2Tra

p
MirTarDn-V2Tra MirTarD
p
n-V2Tra

p
vrrp-Auth-V2Tra
p

vrrp-Aut
h-V2Tra
p

vrrp-Auth-V2T N
rap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-485

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Is Correlation
Allowed

vrrp-MasRl-V2Tr vrrp-Mas vrrp-MasRl-V


ap
Rl-V2Tr 2Trap

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

ap
vrPktErr-V2Trap

vrPktErr- vrPktErr-V2Tr
V2Trap ap

IManagedEle F
ment

wrn F

vrIfPktErr-V2Tra
p

vrIfPktE vrIfPktErr-V2
rr-V2Tra Trap
p

IManagedEle F
ment

wrn F

vrrp-VRAdd-V2T
rap

vrrp-VR
Add-V2
Trap

vrrp-VRAdd-V N
2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

vrrp-VRDel-V2Tr vrrp-VR vrrp-VRDel-V


ap
Del-V2T 2Trap

rap
vrrp-VRAtCh-V2
Trap

vrrp-VR vrrp-VRAtChAtCh-V2 V2Trap


Trap

IManagedEle F
ment

wrn F

vrrp-VRAd-V2Tr
ap

vrrp-VR vrrp-VRAd-V2 N
Ad-V2Tr Trap
ap

IManagedEle F
ment

wrn F

vrrp-VROpUp- N
V2Trap

IManagedEle F
ment

wrn F

vrrp-VROpDn- N
V2Trap

IManagedEle F
ment

wrn F

VRTrIfAdd-V2Tra VRTrIfA VRTrIfAdd-V2 N


p
dd-V2Tr Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

VRTrIfChg-V2 N
Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

vrrp-VROpUp-V2 vrrp-VR
Trap
OpUp-V

2Trap
vrrp-VROpDn-V2 vrrp-VR
Trap
OpDn-V

2Trap

ap
VRTrIfDel-V2Tra VRTrIfD VRTrIfDel-V2
p
el-V2Tra Trap

p
VRTrIfChg-V2Tra VRTrIfC
p
hg-V2Tr

ap
VRIpAdrAdd-V2T VRIpAdr VRIpAdrAddrap
Add-V2 V2Trap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-486

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IManagedEle F
ment

wrn F

Os3-GlblAtr-V2T Os3-Glbl Os3-GlblAtr-V N


rap
Atr-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Os3-GlblPrc-V2T Os3-Glbl Os3-GlblPrc-V N


rap
Prc-V2T 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Os3-IfAtr-V2Trap Os3-IfAt Os3-IfAtr-V2T N

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Os3-VIfAdd-V N
2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

VRIpAdrDel-V2T VRIpAdr VRIpAdrDelrap


Del-V2T V2Trap

Activate
Flow

Event
Type

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

rap
IptvLosStr-V2Tra IptvLosS IptvLosStr-V2
p
tr-V2Tra Trap

ap
Os3-GlblCnt-V2T Os3-Glbl Os3-GlblCntrap
Cnt-V2T V2Trap

rap

rap
Os3-AreaAtr-V2
Trap

Os3-Are
aAtr-V2
Trap

Os3-AreaAtrV2Trap

Os3-AreaAdd-V2 Os3-Are Os3-AreaAddTrap


aAdd-V2 V2Trap

Trap
Os3-AreaDel-V2
Trap

Os3-Are
aDel-V2
Trap

Os3-AreaDelV2Trap

r-V2Trap rap
Os3-RdstAdd-V2 Os3-Rdst Os3-RdstAddTrap
Add-V2 V2Trap

Trap
Os3-RdstDel-V2
Trap

Os3-Rdst Os3-RdstDelDel-V2T V2Trap


rap

Os3-VIfAdd-V2Tr Os3-VIf
ap
Add-V2

Trap
Os3-VIfDel-V2Tr
ap

Os3-VIf Os3-VIfDel-V
Del-V2T 2Trap
rap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-487

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Os3-Admin-V2Tr Os3-Ad Os3-Admin-V


ap
min-V2T 2Trap

IManagedEle F
ment

wrn F

Os3-OlSt Os3-OlStChgChg-V2 V2Trap


Trap

IManagedEle F
ment

wrn F

Os3-OpUp-V2Tra Os3-Op Os3-OpUp-V2


p
Up-V2Tr Trap

IManagedEle F
ment

wrn F

Os3-OpDownV2Trap

IManagedEle F
ment

wrn F

Os3-NssaTRlV2Trap

IManagedEle F
ment

wrn F

Os3-NssaTStV2Trap

IManagedEle F
ment

wrn F

Os3-AggrAdd-V2 Os3-Agg Os3-AggrAdd- N


Trap
rAdd-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Os3-AggrChg-V2 Os3-Agg Os3-AggrChg- N


Trap
rChg-V2 V2Trap

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Os3-VIfAtr-V2Tr
ap

Event
Type

Expedites
Polling

Os3-VIf Os3-VIfAtr-V
Atr-V2Tr 2Trap
ap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

rap
Os3-OlStChg-V2
Trap

ap
Os3-OpDown-V2 Os3-Op
Trap
Down-V

2Trap
Os3-NssaTRl-V2 Os3-Nss
Trap
aTRl-V2

Trap
Os3-NssaTSt-V2 Os3-Nss
Trap
aTSt-V2

Trap

Trap
Os3-AggrDel-V2
Trap

Os3-Agg Os3-AggrDelrDel-V2 V2Trap


Trap

Trap
Os3-LsaHiTh-V2
Trap

Os3-Lsa Os3-LsaHiThHiTh-V2 V2Trap


Trap

IManagedEle F
ment

wrn F

Os3-LsaLoTh-V2
Trap

Os3-Lsa Os3-LsaLoThLoTh-V2 V2Trap


Trap

IManagedEle F
ment

wrn F

Os3-MxLsaEx-V
2Trap

Os3-Mx Os3-MxLsaEx
LsaEx-V -V2Trap
2Trap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-488

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Os3-RedHiTh-V2 Os3-Red Os3-RedHiTh- N


Trap
HiTh-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Os3-MxLsaCl-V2 Os3-Mx
Trap
LsaCl-V

Event Source
(IMO Name)

IManagedEle F
ment

Event
Type

Expedites
Polling

Os3-MxLsaCl- N
V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

2Trap

Trap
Os3-RedLoTh-V2 Os3-Red Os3-RedLoTh- N
Trap
LoTh-V2 V2Trap

Trap
Os3-MxRedEx-V Os3-Mx Os3-MxRedEx N
2Trap
RedEx-V -V2Trap

2Trap
Os3-MxRedCl-V
2Trap

Os3-Mx Os3-MxRedCl
RedCl-V -V2Trap
2Trap

IManagedEle F
ment

wrn F

Os3-ExIfChg-V2T Os3-ExIf Os3-ExIfChgrap


Chg-V2 V2Trap

IManagedEle F
ment

wrn F

Os3-ExV Os3-ExVIfCh- N
IfCh-V2 V2Trap
Trap

IManagedEle F
ment

wrn F

Os3-ExNbrCh-V2 Os3-ExN Os3-ExNbrCh- N


Trap
brCh-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Os3-ExNbrDn-V2 Os3-ExN Os3-ExNbrDn- N


Trap
brDn-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Trap
Os3-ExVIfCh-V2
Trap

Trap
Os3-ExVNbCh-V
2Trap

Os3-ExV Os3-ExVNbCh N
NbCh-V -V2Trap
2Trap

Os3-ExIfCEr-V2T Os3-ExIf Os3-ExIfCErrap


CEr-V2T V2Trap

rap
Os3-XVIfCEr-V2T Os3-XVI Os3-XVIfCErrap
fCEr-V2 V2Trap

Trap

Trap
Os3-XNbrGrR-V2 Os3-XN Os3-XNbrGrR
Trap
brGrR-V -V2Trap

2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-489

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

Is Correlation
Allowed

Os3-XNbrGrD-V2 Os3-XN Os3-XNbrGrD


Trap
brGrD-V -V2Trap

Event Source
(IMO Name)

IManagedEle F
ment

Expedites
Polling
N

Event
Subtype

Event
Type

Correlate

Tellabs V2 Trap Registry Parameters (Continued)

Short
Description

Table 10-54

2Trap
Os3-XVNbGrR-V
2Trap

Os3-XV
NbGrRV2Trap

Os3-XVNbGr
R-V2Trap

IManagedEle F
ment

wrn F

Os3-XVNbGrD-V Os3-XV
2Trap
NbGrD-

Os3-XVNbGr
D-V2Trap

IManagedEle F
ment

wrn F

Os3-ArDupRt-V2 Os3-ArD Os3-ArDupRt- N


Trap
upRt-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Lacp-GlbCh-V N
2Trap

IManagedEle F
ment

wrn F

Lacp-AdmnCh N
-V2Trap

IManagedEle F
ment

wrn F

Lacp-Up-V2Tr N
ap

IManagedEle F
ment

wrn F

V2Trap

Trap
Os3-OrigLsa-V2T Os3-Orig Os3-OrigLsarap
Lsa-V2T V2Trap

rap
Os3-MaxAgLs-V Os3-Max Os3-MaxAgLs
2Trap
AgLs-V2 -V2Trap

Trap
Lacp-GlbCh-V2T Lacp-Gl
rap
bCh-V2

Trap
Lacp-AdmnCh-V Lacp-Ad
2Trap
mnCh-V

2Trap
Lacp-Up-V2Trap Lacp-Up

-V2Trap
Lacp-Down-V2T
rap

Lacp-Do Lacp-Down-V
wn-V2Tr 2Trap
ap

IManagedEle F
ment

wrn F

Cert-Warn1-V2T
rap

Cert-War Cert-Warn1-V
n1-V2Tr 2Trap
ap

IManagedEle F
ment

wrn F

Cert-Warn2-V2T
rap

Cert-War Cert-Warn2-V
n2-V2Tr 2Trap
ap

IManagedEle F
ment

wrn F

Cert-Warn3-V2T
rap

Cert-War Cert-Warn3-V
n3-V2Tr 2Trap
ap

IManagedEle F
ment

wrn F

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-490

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

IPSec-SaNeg-V2 IPSec-Sa IPSec-SaNegTrap


Neg-V2 V2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IPSec-Sa IPSec-SaFl-dV N
Fl-dV2T 2Trap
rap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

IPSec-Ena-V2Tr
ap

Event
Type

Expedites
Polling

IPSec-En IPSec-Ena-V2
a-V2Tra Trap
p

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

Trap
IPSec-SaSuc-V2 IPSec-Sa IPSec-SaSucTrap
Suc-V2T V2Trap

rap
IPSec-SaFl-dV2
Trap

IPSec-SaDrp-V2 IPSec-Sa IPSec-SaDrpTrap


Drp-V2T V2Trap

rap
IPSec-Dis-V2Tra IPSec-Di IPSec-Dis-V2
p
s-V2Tra Trap

p
BF-GenSucc-V2
Trap

BF-GenS BF-GenSuccucc-V2T V2Trap


rap

IManagedEle F
ment

wrn F

BF-GenErr-V2Tr
ap

BF-Gen BF-GenErr-V2 N
Err-V2Tr Trap
ap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

BF-TranSuc-V2T BF-Tran BF-TranSuc-V


rap
Suc-V2T 2Trap

rap
BFTranErr-V2Tra BFTranE BFTranErr-V2
p
rr-V2Tra Trap

p
BF-Del-V2Trap

BF-DelV2Trap

BF-Del-V2Tra
p

IManagedEle F
ment

wrn F

BF-Init-V2Trap

BF-InitV2Trap

BF-Init-V2Tra
p

IManagedEle F
ment

wrn F

Vpt-AttrChg-V N
2Trap

IManagedEle F
ment

wrn F

Vpt-Add Vpt-Add-V2Tr N
-V2Trap ap

IManagedEle F
ment

wrn F

Vpt-AttrChg-V2T Vpt-Attr
rap
Chg-V2

Trap
Vpt-Add-V2Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-491

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Auto
Remove

Flapping

wrn F

Vpt-Up-V2Trap

Vpt-UpV2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Oam-SesEst-V2T Oam-Ses Oam-SesEst-V N


rap
Est-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

Event
Subtype
Vpt-Up-V2Tra N
p

Vpt-Down-V2Tra Vpt-Dow Vpt-Down-V2


p
n-V2Tra Trap

Is Ticketable

Auto Clear

Severity

Weight

Activate
Flow

IManagedEle F
ment

Event Source
(IMO Name)

Vpt-Del- Vpt-Del-V2Tra N
V2Trap p

Event
Type

Expedites
Polling

Vpt-Del-V2Trap

Short
Description

Is Correlation
Allowed

Tellabs V2 Trap Registry Parameters (Continued)

Correlate

Table 10-54

ap
Oam-SesTerm-V Oam-Ses Oam-SesTerm- N
2Trap
Term-V2 V2Trap

Trap
Oam-GlblChg-V2 Oam-Glb Oam-GlblChg- N
Trap
lChg-V2 V2Trap

Trap
Oam-LinkChg-V2 Oam-Lin Oam-LinkChg- N
Trap
kChg-V2 V2Trap

Trap
Oam-LbStChg-V
2Trap

Oam-Lb Oam-LbStChg
StChg-V -V2Trap
2Trap

IManagedEle F
ment

wrn F

Peer-EvtSet-V2T Peer-Evt Peer-EvtSet-V


rap
Set-V2Tr 2Trap

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

IManagedEle F
ment

wrn F

ap
Peer-EvtClr-V2Tr Peer-Evt Peer-EvtClr-V
ap
Clr-V2Tr 2Trap

ap
Oam-TestChg-V2 Oam-Tes Oam-TestChgTrap
tChg-V2 V2Trap

Trap

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-492

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-493

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-494

OL-24429-01

Chapter 10

Traps
Tellabs V2 Traps Registry Parameters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

10-495

Chapter 10

Traps

Tellabs V2 Traps Registry Parameters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

10-496

OL-24429-01

CH A P T E R

11

Syslogs
This chapter provides detailed information about the syslogs for third-party devices in Cisco ANA.
Syslogs appear in the Cisco ANA EventVision Syslog tab. (For information about Cisco ANA
EventVision, see the Cisco Active Network Abstraction 3.7.2 User Guide.) Syslog information is
presented in two forms:

Syslog Tables: A section devoted to the supported syslogs for each NOS platform (e.g., Juniper
E-Series Syslogs). Each of these sections contains a table listing the name of each supported syslog,
along with a description, the raw format of the syslog string, and a short description. In the syslog
tables in this Reference, each syslogs short description is also a link to its corresponding registry
parameters.

Registry Parameter Tables: A section devoted to the event types, event subtypes and Cisco ANA
registry parameters for the supported syslogs. There is one parameter table for every syslog table
(e.g., Juniper E-Series Syslogs Registry Parameters). Each syslog can have multiple event subtypes,
or states. The parameter tables indicate when each state is generated, and how Cisco ANA processes
them (such as their severity, whether they are ticketable, can be correlated, are autocleared, and so
on).

Cisco ANA 3.7.x users can enable an additional IP in the device for traps and syslogs. This new feature
is called Multisource Events. When Cisco ANA 3.7.x receives a trap or syslog from that device (from
the new IP) it will still recognize the device. For more details on multisource events see Cisco ANA 3.7.1
Release Notes.
This chapter includes the following topics:

Juniper E-Series Syslogs, page 11-2

Juniper JCS Control System Syslogs, page 11-4

Juniper M-Series Syslogs, page 11-8

Juniper MX-Series Syslogs, page 11-12

Juniper T-Series Syslogs, page 11-16

RAD ACE Syslogs, page 11-16

Juniper E-Series Syslogs Registry Parameters, page 11-16

Juniper JCS Control System Syslogs Registry Parameters, page 11-18

Juniper M-Series Syslogs Registry Parameters, page 11-20

Juniper MX-Series Syslogs Registry Parameters, page 11-23

Juniper T-Series Syslogs Registry Parameters, page 11-25

RAD ACE Syslogs Registry Parameters, page 11-25

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-1

Chapter 11

Syslogs

Juniper E-Series Syslogs

Juniper E-Series Syslogs


Table 11-1 lists the Juniper E-Series Syslogs supported in Cisco ANA.
Table 11-1

Juniper E-Series Syslogs

Syslog Name

Description

Raw Format

Short Description

link up syslog

juniper parse link up


syslog

SNMP_TRAP_LINK_UP: ifIndex 33,


ifAdminStatus up(1), ifOperStatus
up(1), ifName so-0/3/1.20

Juniper Link up
syslog

juniper-link-down

juniper parse link


down syslog

SNMP_TRAP_LINK_DOWN: ifIndex
33, ifAdminStatus up(1), ifOperStatus
down(2), ifName so-0/3/1.20

Juniper Link
down syslog

juniper-ospf-neighbor-down

juniper parse ospf


neighbor syslog

RPD_OSPF_NBRUP: OSPF neighbor


10.110.1.5 (so-0/3/1.20) state changed
from Init to ExStart due to 2WayRcvd
(event reason: initial DBD

Juniper OSPF
neighbor down
syslog

juniper-ospf-neighbor-down

juniper parse ospf


neighbor syslog

RPD_OSPF_NBRDOWN: OSPF
neighbor 10.110.1.5 (so-0/3/1.20) state
changed from Full to Down due to
InActive

Juniper OSPF
neighbor up
syslog

juniper-card-out

juniper parse card in


syslog

Juniper card out


CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU insertion
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: @ 0/3/*, jnxFruType
11, jnxFruSlot 1)

juniper-card-out

juniper parse card out


syslog

Juniper card in
CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU removal
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: 2x OC-3 SONET,
SMIR @ 0/3/*, jnxFruType 11,
jnxFruSlo 1)

juniper-ldp-neighbor-down

handle ldp neighbor


change syslog

RPD_LDP_NBRUP: LDP neighbor


10.110.1.5 (so-0/3/1.20) is up

juniper-ldp-neighbor-down

handle ldp neighbor


change syslog

RPD_LDP_NBRDOWN: LDP neighbor Juniper LDP


10.110.1.5 (so-0/3/1.20) is down
neighbor down
syslog

bgp-started

bgp started syslog

bgp_connect_start: connect
192.168.10.1 (Internal AS 1): No route
to host

Juniper BGP
Connection
Started

bgp-task-connect

bgp task connect


syslog

task_connect: task
BGP_1.192.168.20.1+179 addr
192.168.20.1+179: No route to host

Juniper BGP task


connect

Juniper LDP
neighbor up
syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-2

OL-24429-01

Chapter 11

Syslogs
Juniper E-Series Syslogs

Table 11-1

Juniper E-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

bgp-peer-init

bgp peer init syslog

bgp_peer_init: BGP peer 90.90.90.3


(Internal AS 100) local address
90.90.90.2 not found. Leaving peer
idled

Juniper BGP peer


init

bgp-reset

bgp reset syslog

Juniper bgp reset


bgp_mgmt_clear_neighbor:
NOTIFICATION sent to 192.168.30.1
(Internal AS 1): code 6 (Cease) subcode
4 (Administratively Reset), Reason:
Management session cleared BGP
neighbor

bgp-timeout

bgp timeout syslog

bgp_traffic_timeout: NOTIFICATION Juniper bgp


timeout
sent to 90.90.90.3 (Internal AS 100):
code 4 (Hold Timer Expired Error),
Reason: holdtime expired for 90.90.90.3
(Internal AS 100), socket buffer sndcc:
61 rcvcc: 0 TCP state: 4, snd_una:
3386242142 snd_nxt: 3386242203
snd_wnd: 16384 rcv_nxt: 1418307052
rcv_adv: 1418323436, keepalive timer 0

sib-offline

sib offline syslog

CHASSISD_FRU_OFFLINE_NOTICE
: Taking SIB 0 offline: Reconnect

Juniper BGP
Started

sib-reset

sib reset syslog

CHASSISD_GBUS_RESET_EVENT:
SIB#0 - Assert Board Reset

Juniper sib reset

bgp-neighbor-state-changed

handle BGP 5 syslog

Juniper BGP
1)
RPD_BGP_NEIGHBOR_STATE_CHA neighbor down
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
Established to Idle (event Closed)
2)
RPD_BGP_NEIGHBOR_STATE_CHA
NGED: BGP peer 80.80.80.8 (Internal
AS 65520) changed state from
OpenConfirm to Established (event
RecvKeepAlive)

bgp-neighbor-state-changed

handle BGP 5 syslog

Juniper BGP
Sep 5 17:09:10 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA neighbor up
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
OpenConfirm to Established (event
RecvKeepAlive)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-3

Chapter 11

Syslogs

Juniper JCS Control System Syslogs

Table 11-1

Juniper E-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

fru-power-off

juniper fru power on


syslog

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
off syslog
trap generated: FRU power on
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

fru-power-off

juniper fru power off


syslog

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
on syslog
trap generated: FRU power off
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

Juniper JCS Control System Syslogs


Table 11-2 lists the Juniper JCS Control System Syslogs supported in Cisco ANA.
Table 11-2

Juniper JCS Control SystemSyslogs

Syslog Name

Description

Raw Format

Short Description

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation

Juniper BGP
Sep 5 17:08:26 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA neighbor down
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
Established to Idle (event Closed)

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation.

Juniper
Sep 5 17:09:10 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA BGPneighbor up
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
OpenConfirm to Established (event
RecvKeepAlive)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-4

OL-24429-01

Chapter 11

Syslogs
Juniper JCS Control System Syslogs

Table 11-2

Juniper JCS Control SystemSyslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

bgp_peer_init

Interface for local


address used for
connection with the
relevant peer
not found.

Jun 8 23:00:14 rpd[2700]:


bgp_peer_init: BGP peer 90.90.90.3
(Internal AS 100) local address
90.90.90.2 not found. Leaving peer
idled

Juniper BGP peer


init

bgp_mgmt_clear_neighbor

Management session
cleared BGP neighbor

Juniper bgp reset


Jun 9 00:26:50 rpd[38080]:
bgp_mgmt_clear_neighbor:
NOTIFICATION sent to 192.168.30.1
(Internal AS 1): code 6 (Cease) subcode
4 (Administratively Reset), Reason:
Management session cleared BGP
neighbor

bgp_connect_start

Connection failed
(bind failure) because
it is not possible to use
the local address used
for connection to the
relevant peer.

Jun 9 14:44:44 rpd[15952]:


bgp_connect_start: connect
192.168.10.1 (Internal AS 1): No route
to host

task_connect

Routine to call when a Jun 9 18:27:47 rpd[2796]:


connect has completed task_connect: task
on this socket.
BGP_1.192.168.20.1+179 addr
192.168.20.1+179: No route to host

bgp_traffic_timeout

Juniper bgp
Hold timeout to the
Jun 8 17:41:39 rpd[2576]:
relevant peer occurred. bgp_traffic_timeout: NOTIFICATION timeout
sent to 90.90.90.3 (Internal AS 100):
code 4 (Hold Timer Expired Error),
Reason: holdtime expired for 90.90.90.3
(Internal AS 100), socket buffer sndcc:
61 rcvcc: 0 TCP state: 4, snd_una:
3386242142 snd_nxt: 3386242203
snd_wnd: 16384 rcv_nxt: 1418307052
rcv_adv: 1418323436, keepalive timer 0

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card out


CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU removal
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: 2x OC-3 SONET,
SMIR @ 0/3/*, jnxFruType 11,
jnxFruSlo

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card in
CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU insertion
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: @ 0/3/*, jnxFruType
11, jnxFruSlot 1)

Juniper BGP
Connection
Started

Juniper BGP task


connect

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-5

Chapter 11

Syslogs

Juniper JCS Control System Syslogs

Table 11-2

Juniper JCS Control SystemSyslogs (Continued)

Syslog Name

Description

Raw Format

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
off syslog
trap generated: FRU power off
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
on syslog
trap generated: FRU power on
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

RPD_LDP_NBRDOWN

RPD_LDP_NBRDOWN: LDP neighbor Juniper LDP


A Label Distribution
10.110.1.5 (so-0/3/1.20) is down
neighbor down
Protocol (LDP)
syslog
adjacency was
terminated because the
indicated neighbor
stopped
communicating. If the
adjacency was the only
one with this neighbor,
the routing protocol
process (rpd)
terminated the
associated LDP
session.

RPD_LDP_NBRUP

RPD_LDP_NBRUP: LDP neighbor


A Label Distribution
10.110.1.5 (so-0/3/1.20) is up
Protocol (LDP)
adjacency with the
indicated neighbor
became active. The
routing protocol
process (rpd)
established an LDP
session with the
neighbor if one did not
already exist.

SNMP_TRAP_LINK_DOWN

The SNMP agent


process (snmpd)
generated a linkDown
trap because the
indicated interface
changed state to
'down'.

SNMP_TRAP_LINK_DOWN: ifIndex
28, ifAdminStatus up(1), ifOperStatus
down(2), ifName fe-0/0/3

Short Description

Juniper LDP
neighbor up
syslog

Juniper Link
down syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-6

OL-24429-01

Chapter 11

Syslogs
Juniper JCS Control System Syslogs

Table 11-2

Juniper JCS Control SystemSyslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

SNMP_TRAP_LINK_UP

SNMP_TRAP_LINK_UP: ifIndex 28,


The SNMP agent
ifAdminStatus up(1), ifOperStatus
process (snmp)
generated a linkUp trap up(1), ifName fe-0/0/3
because the indicated
interface changed state
to 'up'.

RPD_OSPF_NBRDOWN

An OSPF adjacency
with the indicated
neighboring router was
terminated. The local
router no longer
exchanges routing
information with, or
directs traffic to, the
neighboring router.

RPD_OSPF_NBRDOWN: OSPF
neighbor 10.111.1.9 (fe-0/0/3.0) state
changed from Full to Down due to Kill
all neighbors

Juniper OSPF
neighbor down
syslog

RPD_OSPF_NBRUP

An OSPF adjacency
was established with
the indicated
neighboring router.
The local router can
now exchange
information with it.

RPD_OSPF_NBRUP: OSPF neighbor


10.111.1.9 (fe-0/0/3.0) state changed
from Init to 2Way due to Two way
communication established

Juniper OSPF
neighbor up
syslog

CHASSISD_FRU_OFFLINE_NOTI
CE

Jun 8 11:37:59 chassisd[2599]:


The chassis process
CHASSISD_FRU_OFFLINE_NOTICE
(chassisd) took the
: Taking SIB 0 offline: Reconnect
indicated component
(field-replaceable unit,
or FRU) offline for the
indicated reason.

Juniper sib offline

CHASSISD_GBUS_RESET_EVEN
T

Jun 8 11:38:09 chassisd[2599]:


The chassis process
CHASSISD_GBUS_RESET_EVENT:
(chassisd) reset the
SIB#0 - Assert Board Reset
GBUS for the
indicated component
(field-replaceable unit,
or FRU). This is a
normal part of startup.

Juniper sib reset

Juniper Link up
syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-7

Chapter 11

Syslogs

Juniper M-Series Syslogs

Juniper M-Series Syslogs


Table 11-3 lists the Juniper M-Series Syslogs supported in Cisco ANA.
Table 11-3

Juniper M-Series Syslogs

Syslog Name

Description

Raw Format

Short Description

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation

Juniper BGP
Sep 5 17:08:26 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA neighbor down
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
Established to Idle (event Closed)

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation.

Juniper
Sep 5 17:09:10 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA BGPneighbor up
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
OpenConfirm to Established (event
RecvKeepAlive)

bgp_peer_init

Interface for local


address used for
connection with the
relevant peer
not found.

Juniper BGP peer


Jun 8 23:00:14 rpd[2700]:
init
bgp_peer_init: BGP peer 90.90.90.3
(Internal AS 100) local address
90.90.90.2 not found. Leaving peer idled

bgp_mgmt_clear_neighbor

Management session
cleared BGP neighbor

Juniper bgp reset


Jun 9 00:26:50 rpd[38080]:
bgp_mgmt_clear_neighbor:
NOTIFICATION sent to 192.168.30.1
(Internal AS 1): code 6 (Cease) subcode
4 (Administratively Reset), Reason:
Management session cleared BGP
neighbor

bgp_connect_start

Connection failed
(bind failure) because
it is not possible to use
the local address used
for connection to the
relevant peer.

Jun 9 14:44:44 rpd[15952]:


bgp_connect_start: connect
192.168.10.1 (Internal AS 1): No route
to host

task_connect

Routine to call when a Jun 9 18:27:47 rpd[2796]: task_connect: Juniper BGP task
connect has completed task BGP_1.192.168.20.1+179 addr
connect
on this socket.
192.168.20.1+179: No route to host

Juniper BGP
Connection
Started

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-8

OL-24429-01

Chapter 11

Syslogs
Juniper M-Series Syslogs

Table 11-3

Juniper M-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

bgp_traffic_timeout

Juniper bgp
Hold timeout to the
Jun 8 17:41:39 rpd[2576]:
relevant peer occurred. bgp_traffic_timeout: NOTIFICATION timeout
sent to 90.90.90.3 (Internal AS 100):
code 4 (Hold Timer Expired Error),
Reason: holdtime expired for 90.90.90.3
(Internal AS 100), socket buffer sndcc:
61 rcvcc: 0 TCP state: 4, snd_una:
3386242142 snd_nxt: 3386242203
snd_wnd: 16384 rcv_nxt: 1418307052
rcv_adv: 1418323436, keepalive timer 0

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card out


CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU removal
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: 2x OC-3 SONET,
SMIR @ 0/3/*, jnxFruType 11,
jnxFruSlo

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card in
CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU insertion
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: @ 0/3/*, jnxFruType
11, jnxFruSlot 1)

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
off syslog
trap generated: FRU power off
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
on syslog
trap generated: FRU power on
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-9

Chapter 11

Syslogs

Juniper M-Series Syslogs

Table 11-3

Juniper M-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

RPD_LDP_NBRDOWN

RPD_LDP_NBRDOWN: LDP neighbor Juniper LDP


A Label Distribution
10.110.1.5 (so-0/3/1.20) is down
neighbor down
Protocol (LDP)
syslog
adjacency was
terminated because the
indicated neighbor
stopped
communicating. If the
adjacency was the only
one with this neighbor,
the routing protocol
process (rpd)
terminated the
associated LDP
session.

RPD_LDP_NBRUP

RPD_LDP_NBRUP: LDP neighbor


A Label Distribution
10.110.1.5 (so-0/3/1.20) is up
Protocol (LDP)
adjacency with the
indicated neighbor
became active. The
routing protocol
process (rpd)
established an LDP
session with the
neighbor if one did not
already exist.

Juniper LDP
neighbor up
syslog

RPD_LDP_SESSIONDOWN

%DAEMON-6-RPD_LDP_SESSIOND
The routing protocol
OWN: LDP session 1.2.3.4 is down
process (rpd)
terminated an LDP
session with the
indicated neighbor and
deleted all labels
exchanged during the
session.

Juniper LDP
session down
syslog

RPD_LDP_SESSIONUP

The routing protocol


process (rpd)
established an LDP
session with the
indicated neighbor.
The routers began
exchanging labels.

%DAEMON-6-RPD_LDP_SESSIONU
P: LDP session 1.2.3.4 is up

Juniper LDP
session up syslog

SNMP_TRAP_LINK_DOWN

The SNMP agent


process (snmpd)
generated a linkDown
trap because the
indicated interface
changed state to
'down'.

SNMP_TRAP_LINK_DOWN: ifIndex
28, ifAdminStatus up(1), ifOperStatus
down(2), ifName fe-0/0/3

Juniper Link
down syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-10

OL-24429-01

Chapter 11

Syslogs
Juniper M-Series Syslogs

Table 11-3

Juniper M-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

SNMP_TRAP_LINK_UP

SNMP_TRAP_LINK_UP: ifIndex 28,


The SNMP agent
ifAdminStatus up(1), ifOperStatus
process (snmp)
generated a linkUp trap up(1), ifName fe-0/0/3
because the indicated
interface changed state
to 'up'.

RPD_OSPF_NBRDOWN

An OSPF adjacency
with the indicated
neighboring router was
terminated. The local
router no longer
exchanges routing
information with, or
directs traffic to, the
neighboring router.

RPD_OSPF_NBRDOWN: OSPF
neighbor 10.111.1.9 (fe-0/0/3.0) state
changed from Full to Down due to Kill
all neighbors

Juniper OSPF
neighbor down
syslog

RPD_OSPF_NBRUP

An OSPF adjacency
was established with
the indicated
neighboring router.
The local router can
now exchange
information with it.

RPD_OSPF_NBRUP: OSPF neighbor


10.111.1.9 (fe-0/0/3.0) state changed
from Init to 2Way due to Two way
communication established

Juniper OSPF
neighbor up
syslog

CHASSISD_FRU_OFFLINE_NOTI
CE

Jun 8 11:37:59 chassisd[2599]:


The chassis process
CHASSISD_FRU_OFFLINE_NOTICE
(chassisd) took the
: Taking SIB 0 offline: Reconnect
indicated component
(field-replaceable unit,
or FRU) offline for the
indicated reason.

Juniper sib offline

CHASSISD_GBUS_RESET_EVEN
T

Jun 8 11:38:09 chassisd[2599]:


The chassis process
CHASSISD_GBUS_RESET_EVENT:
(chassisd) reset the
SIB#0 - Assert Board Reset
GBUS for the
indicated component
(field-replaceable unit,
or FRU). This is a
normal part of startup.

Juniper sib reset

Juniper Link up
syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-11

Chapter 11

Syslogs

Juniper MX-Series Syslogs

Juniper MX-Series Syslogs


Table 11-4 lists the Juniper MX-Series Syslogs supported in Cisco ANA.
Table 11-4

Juniper MX-Series Syslogs

Syslog Name

Description

Raw Format

Short Description

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation

Juniper BGP
Sep 5 17:08:26 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA neighbor down
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
Established to Idle (event Closed)

RPD_BGP_NEIGHBOR_STATE_C
HANGED

During BGP
negotiation with the
local router, the state of
the indicated BGP
neighbor (peer)
changed as indicated.
The ESTABLISHED
state is the final state in
the neighbor
negotiation.

Juniper
Sep 5 17:09:10 rpd[3161]:
RPD_BGP_NEIGHBOR_STATE_CHA BGPneighbor up
NGED: BGP peer 80.80.80.8 (Internal syslog
AS 65520) changed state from
OpenConfirm to Established (event
RecvKeepAlive)

bgp_peer_init

Interface for local


address used for
connection with the
relevant peer
not found.

Juniper BGP peer


Jun 8 23:00:14 rpd[2700]:
init
bgp_peer_init: BGP peer 90.90.90.3
(Internal AS 100) local address
90.90.90.2 not found. Leaving peer idled

bgp_mgmt_clear_neighbor

Management session
cleared BGP neighbor

Juniper bgp reset


Jun 9 00:26:50 rpd[38080]:
bgp_mgmt_clear_neighbor:
NOTIFICATION sent to 192.168.30.1
(Internal AS 1): code 6 (Cease) subcode
4 (Administratively Reset), Reason:
Management session cleared BGP
neighbor

bgp_connect_start

Connection failed
(bind failure) because
it is not possible to use
the local address used
for connection to the
relevant peer.

Jun 9 14:44:44 rpd[15952]:


bgp_connect_start: connect
192.168.10.1 (Internal AS 1): No route
to host

task_connect

Routine to call when a Jun 9 18:27:47 rpd[2796]: task_connect: Juniper BGP task
connect has completed task BGP_1.192.168.20.1+179 addr
connect
on this socket.
192.168.20.1+179: No route to host

Juniper BGP
Connection
Started

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-12

OL-24429-01

Chapter 11

Syslogs
Juniper MX-Series Syslogs

Table 11-4

Juniper MX-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

bgp_traffic_timeout

Juniper bgp
Hold timeout to the
Jun 8 17:41:39 rpd[2576]:
relevant peer occurred. bgp_traffic_timeout: NOTIFICATION timeout
sent to 90.90.90.3 (Internal AS 100):
code 4 (Hold Timer Expired Error),
Reason: holdtime expired for 90.90.90.3
(Internal AS 100), socket buffer sndcc:
61 rcvcc: 0 TCP state: 4, snd_una:
3386242142 snd_nxt: 3386242203
snd_wnd: 16384 rcv_nxt: 1418307052
rcv_adv: 1418323436, keepalive timer 0

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card out


CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU removal
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: 2x OC-3 SONET,
SMIR @ 0/3/*, jnxFruType 11,
jnxFruSlo

CHASSISD_SNMP_TRAP7

The chassis process


(chassisd) generated a
Simple Network
Management Protocol
(SNMP) trap with the
seven indicated
argument-value pairs.

Juniper card in
CHASSISD_SNMP_TRAP7: SNMP
syslog
trap generated: FRU insertion
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName PIC: @ 0/3/*, jnxFruType
11, jnxFruSlot 1)

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
off syslog
trap generated: FRU power off
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

CHASSISD_SNMP_TRAP9

SNMP trap generated:


FRU power off

Juniper fru power


CHASSISD_SNMP_TRAP9: SNMP
on syslog
trap generated: FRU power on
(jnxFruContentsIndex 8, jnxFruL1Index
1, jnxFruL2Index 4, jnxFruL3Index 0,
jnxFruName SIB 1, jnxFruType 9,
jnxFruSlot 2, jnxFruOfflineReason 23,
jnxFruLastPowerOff 3089,
jnxFruLastPowerOn 0)

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-13

Chapter 11

Syslogs

Juniper MX-Series Syslogs

Table 11-4

Juniper MX-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

RPD_LDP_NBRDOWN

RPD_LDP_NBRDOWN: LDP neighbor Juniper LDP


A Label Distribution
10.110.1.5 (so-0/3/1.20) is down
neighbor down
Protocol (LDP)
syslog
adjacency was
terminated because the
indicated neighbor
stopped
communicating. If the
adjacency was the only
one with this neighbor,
the routing protocol
process (rpd)
terminated the
associated LDP
session.

RPD_LDP_NBRUP

RPD_LDP_NBRUP: LDP neighbor


A Label Distribution
10.110.1.5 (so-0/3/1.20) is up
Protocol (LDP)
adjacency with the
indicated neighbor
became active. The
routing protocol
process (rpd)
established an LDP
session with the
neighbor if one did not
already exist.

Juniper LDP
neighbor up
syslog

RPD_LDP_SESSIONDOWN

%DAEMON-6-RPD_LDP_SESSIOND
The routing protocol
OWN: LDP session 1.2.3.4 is down
process (rpd)
terminated an LDP
session with the
indicated neighbor and
deleted all labels
exchanged during the
session.

Juniper LDP
session down
syslog

RPD_LDP_SESSIONUP

The routing protocol


process (rpd)
established an LDP
session with the
indicated neighbor.
The routers began
exchanging labels.

%DAEMON-6-RPD_LDP_SESSIONU
P: LDP session 1.2.3.4 is up

Juniper LDP
session up syslog

SNMP_TRAP_LINK_DOWN

The SNMP agent


process (snmpd)
generated a linkDown
trap because the
indicated interface
changed state to
'down'.

SNMP_TRAP_LINK_DOWN: ifIndex
28, ifAdminStatus up(1), ifOperStatus
down(2), ifName fe-0/0/3

Juniper Link
down syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-14

OL-24429-01

Chapter 11

Syslogs
Juniper MX-Series Syslogs

Table 11-4

Juniper MX-Series Syslogs (Continued)

Syslog Name

Description

Raw Format

Short Description

SNMP_TRAP_LINK_UP

SNMP_TRAP_LINK_UP: ifIndex 28,


The SNMP agent
ifAdminStatus up(1), ifOperStatus
process (snmp)
generated a linkUp trap up(1), ifName fe-0/0/3
because the indicated
interface changed state
to 'up'.

RPD_OSPF_NBRDOWN

An OSPF adjacency
with the indicated
neighboring router was
terminated. The local
router no longer
exchanges routing
information with, or
directs traffic to, the
neighboring router.

RPD_OSPF_NBRDOWN: OSPF
neighbor 10.111.1.9 (fe-0/0/3.0) state
changed from Full to Down due to Kill
all neighbors

Juniper OSPF
neighbor down
syslog

RPD_OSPF_NBRUP

An OSPF adjacency
was established with
the indicated
neighboring router.
The local router can
now exchange
information with it.

RPD_OSPF_NBRUP: OSPF neighbor


10.111.1.9 (fe-0/0/3.0) state changed
from Init to 2Way due to Two way
communication established

Juniper OSPF
neighbor up
syslog

CHASSISD_FRU_OFFLINE_NOTI
CE

Jun 8 11:37:59 chassisd[2599]:


The chassis process
CHASSISD_FRU_OFFLINE_NOTICE
(chassisd) took the
: Taking SIB 0 offline: Reconnect
indicated component
(field-replaceable unit,
or FRU) offline for the
indicated reason.

Juniper sib offline

CHASSISD_GBUS_RESET_EVEN
T

Jun 8 11:38:09 chassisd[2599]:


The chassis process
CHASSISD_GBUS_RESET_EVENT:
(chassisd) reset the
SIB#0 - Assert Board Reset
GBUS for the
indicated component
(field-replaceable unit,
or FRU). This is a
normal part of startup.

Juniper sib reset

Juniper Link up
syslog

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-15

Chapter 11

Syslogs

Juniper T-Series Syslogs

Juniper T-Series Syslogs


Juniper T-Series Syslogs supported in Cisco ANA is the same as the Juniper M-Series Syslogs. For more
details on the Juniper M-Series Syslogs see Table 11-3

RAD ACE Syslogs


Table 11-5 lists the RAD ACE Syslogs supported in Cisco ANA.
Table 11-5

RAD ACE Syslogs

Syslog Name

Description

Raw Format

any syslogs

Default pattern to send


uncorrelated/unknown
syslogs to the vision

Short Description
Generic syslog

Juniper E-Series Syslogs Registry Parameters


Table 11-6 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper E-Series Syslogs Registry Parameters shown in Table 11-1.
Juniper E-Series Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

CLE
ARE
D

Juniper
juniper
juniper
Link down link down link down
syslog
syslog
syslog

ip interface oper
status

IIPInterface F

MAJ

Juniper
OSPF
neighbor
down
syslog
Juniper
OSPF
neighbor
up syslog

Severity

Subtype
Value

Is Ticketable

Is Correlation
Allowed

Event Source
(IMO Name)

juniper
juniper
link down link up
syslog
syslog

Expedites
Polling

Event
Subtype

IIPInterface F

Juniper
Link up
syslog

Event Type

ip interface oper
status

Short
Description

Correlate

Activate Flow

Table 11-6

juniper
ospf
neighbor
syslog

juniper
ospf
neighbor
up syslog

NA

CLE
ARE
D

juniper
ospf
neighbor
syslog

juniper
ospf
neighbor
down
syslog

NA

MAJ

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-16

OL-24429-01

Chapter 11

Syslogs
Juniper E-Series Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

IIPhysicalI
nvestigator

CLE
ARE
D

Juniper
card in
syslog

juniper
card out
syslog

juniper
card out
syslog

physical command

IIPhysicalI
nvestigator

MAJ

Juniper
LDP
neighbor
up syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
up syslog

label switching
table, mpls
interfaces,
mpls-ldp-peers

IProfileCon F
tainer
(LSE)

CLE
ARE
D

Juniper
LDP
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

label switching
table, mpls
interfaces,
mpls-ldp-peers

IProfileCon F
tainer
(LSE)

MAJ

Juniper
BGP
Connectio
n Started
Juniper
BGP task
connect

juniper
bgp
started

juniper
bgp
started

NA

MAJ

juniper
bgp task
connect

juniper
bgp task
connect

NA

MAJ

Juniper
BGP peer
init

juniper
bgp peer
init

juniper
bgp peer
init

NA

MAJ

Juniper
bgp reset

juniper
bgp reset

juniper
bgp reset

NA

MAJ

Juniper
bgp
timeout

juniper
bgp
timeout

juniper
bgp
timeout

NA

MAJ

Juniper
BGP
Started

juniper
juniper
sib offline sib
offline

NA

MAJ

Juniper
sib reset

juniper
sib reset

juniper
sib reset

NA

MAJ

Juniper
BGP
neighbor
down
syslog

juniper
bgp
neighbor
down
syslog

juniper
bgp
neighbor
down
syslog

bgp-process-state,
bgp neighbours

MAJ

IBgpNeigh
bourEntry

Severity

Subtype
Value

Event Type

Is Ticketable

Is Correlation
Allowed

physical command

Event Source
(IMO Name)

juniper
card in
syslog

Expedites
Polling

juniper
card out
syslog

Event
Subtype

Juniper
card out
syslog

Short
Description

Correlate

Juniper E-Series Syslogs Registry Parameters (Continued)

Activate Flow

Table 11-6

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-17

Chapter 11

Syslogs

Juniper JCS Control System Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

CLE
ARE
D

Juniper
juniper
juniper
fru power fru power fru power
off syslog off syslog on syslog

physical command

IIPhysicalI
nvestigator

CLE
ARE
D

Juniper
juniper
juniper
fru power fru power fru power
on syslog off syslog off syslog

physical command

IIPhysicalI
nvestigator

MAJ

Severity

Expedites
Polling

Subtype
Value

Is Ticketable

Is Correlation
Allowed

Event Source
(IMO Name)
IBgpNeigh
bourEntry

juniper
bgp
neighbor
down
syslog

Event
Subtype

bgp-process-state,
bgp neighbours

Juniper
BGP
neighbor
up syslog

Event Type

juniper
bgp
neighbor
up syslog

Short
Description

Correlate

Juniper E-Series Syslogs Registry Parameters (Continued)

Activate Flow

Table 11-6

Juniper JCS Control System Syslogs Registry Parameters


Table 11-7 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper JCS Control System Syslogs Registry Parameters shown in Table 11-2.

Weight

Auto Clear

Auto Remove

Flapping

maj

Juniper
BGPneigh
bor up
syslog

juniper
bgp
neighbor
down
syslog

juniper
bgp
neighbor
up syslog

bgp-process-state,
bgp neighbours

IMpBgp

clr

Juniper
BGP peer
init

juniper
bgp peer
init

juniper
bgp peer
init

IPhysicalLa T
yer

maj

Juniper
bgp reset

juniper
bgp reset

juniper
bgp reset

IPhysicalLa T
yer

maj

Severity

Subtype
Value

Is Ticketable

Is Correlation
Allowed

IMpBgp

Event Source
(IMO Name)

bgp-process-state,
bgp neighbours

Expedites
Polling

juniper
bgp
neighbor
down
syslog

Event
Subtype

juniper
bgp
neighbor
down
syslog

Event Type

Juniper
BGP
neighbor
down
syslog

Short
Description

Correlate

Juniper JCS Control System Syslog Registry Parameters

Activate Flow

Table 11-7

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-18

OL-24429-01

Chapter 11

Syslogs
Juniper JCS Control System Syslogs Registry Parameters

Juniper JCS Control System Syslog Registry Parameters (Continued)

Weight

Auto Clear

Auto Remove

Flapping

IPhysicalLa T
yer

maj

juniper
bgp task
connect

juniper
bgp task
connect

IPhysicalLa T
yer

maj

Juniper
bgp
timeout

juniper
bgp
timeout

juniper
bgp
timeout

IPhysicalLa T
yer

maj

Juniper
card out
syslog

juniper
card out
syslog

juniper
card out
syslog

physical command

IModule

maj

Juniper
card in
syslog

juniper
card out
syslog

juniper
card in
syslog

physical command

IModule

clr

Juniper
juniper
juniper
fru power fru power fru power
off syslog off syslog off syslog

physical command

IModule

maj

Juniper
juniper
juniper
fru power fru power fru power
on syslog off syslog on syslog

physical command

IModule

clr

Juniper
LDP
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

mpls interfaces,
label switching
table

ILse

maj

Juniper
LDP
neighbor
up syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
up syslog

mpls interfaces,
label switching
table

ILse

clr

Juniper
juniper
juniper
Link down link down link down
syslog
syslog
syslog

ip interface oper
status

IIPInterface F

maj

Juniper
Link up
syslog

ip interface oper
status

IIPInterface F

clr

Severity

Expedites
Polling

Subtype
Value

Event Type

juniper
juniper
link down link up
syslog
syslog

Is Ticketable

Is Correlation
Allowed

juniper
bgp
started

Event Source
(IMO Name)

juniper
bgp
started

Event
Subtype

Juniper
BGP
Connectio
n Started
Juniper
BGP task
connect

Short
Description

Correlate

Activate Flow

Table 11-7

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-19

Chapter 11

Syslogs

Juniper M-Series Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

IPhysicalLa T
yer

maj

juniper
ospf
neighbor
syslog

juniper
ospf
neighbor
up syslog

IPhysicalLa F
yer

clr

IModule

maj

IModule

maj

Severity

Subtype
Value

Event Type

Juniper
juniper
juniper
sib offline sib offline sib

Is Ticketable

Is Correlation
Allowed

Event Source
(IMO Name)

juniper
ospf
neighbor
syslog

Expedites
Polling

juniper
ospf
neighbor
syslog

Event
Subtype

Correlate

Juniper
OSPF
neighbor
down
syslog
Juniper
OSPF
neighbor
up syslog

Activate Flow

Juniper JCS Control System Syslog Registry Parameters (Continued)

Short
Description

Table 11-7

offline
Juniper
sib reset

juniper
sib reset

juniper
sib reset

Juniper M-Series Syslogs Registry Parameters


Table 11-8 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper M-Series Syslogs Registry Parameters shown in Table 11-3.

Weight

Auto Clear

Auto Remove

Flapping

maj

Juniper
BGPneigh
bor up
syslog

juniper
bgp
neighbor
down
syslog

juniper
bgp
neighbor
up syslog

bgp-process-state,
bgp neighbours

IMpBgp

clr

Severity

Is Ticketable

Is Correlation
Allowed

Event Source
(IMO Name)
IMpBgp

Expedites
Polling
bgp-process-state,
bgp neighbours

Subtype
Value

juniper
bgp
neighbor
down
syslog

Event
Subtype

juniper
bgp
neighbor
down
syslog

Event Type

Juniper
BGP
neighbor
down
syslog

Short
Description

Correlate

Juniper M-Series Syslogs Registry Parameters

Activate Flow

Table 11-8

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-20

OL-24429-01

Chapter 11

Syslogs
Juniper M-Series Syslogs Registry Parameters

Juniper M-Series Syslogs Registry Parameters (Continued)

Weight

Auto Clear

Auto Remove

Flapping

IPhysicalLa T
yer

maj

Juniper
bgp reset

juniper
bgp reset

juniper
bgp reset

IPhysicalLa T
yer

maj

Juniper
BGP
Connectio
n Started
Juniper
BGP task
connect

juniper
bgp
started

juniper
bgp
started

IPhysicalLa T
yer

maj

juniper
bgp task
connect

juniper
bgp task
connect

IPhysicalLa T
yer

maj

Juniper
bgp
timeout

juniper
bgp
timeout

juniper
bgp
timeout

IPhysicalLa T
yer

maj

Juniper
card out
syslog

juniper
card out
syslog

juniper
card out
syslog

physical command

IModule

maj

Juniper
card in
syslog

juniper
card out
syslog

juniper
card in
syslog

physical command

IModule

clr

Juniper
juniper
juniper
fru power fru power fru power
off syslog off syslog off syslog

physical command

IModule

maj

Juniper
juniper
juniper
fru power fru power fru power
on syslog off syslog on syslog

physical command

IModule

clr

Juniper
LDP
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
down
syslog

mpls interfaces,
label switching
table

ILse

maj

Juniper
LDP
neighbor
up syslog

juniper
ldp
neighbor
down
syslog

juniper
ldp
neighbor
up syslog

mpls interfaces,
label switching
table

ILse

clr

Juniper
LDP
session
down
syslog

juniper
ldp
session
down
syslog

juniper
ldp
session
down
syslog

ILse

maj

Severity

Expedites
Polling

Subtype
Value

Event Type

Is Ticketable

Is Correlation
Allowed

juniper
bgp peer
init

Event Source
(IMO Name)

juniper
bgp peer
init

Event
Subtype

Juniper
BGP peer
init

Short
Description

Correlate

Activate Flow

Table 11-8

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-21

Chapter 11

Syslogs

Juniper M-Series Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

clr

Juniper
juniper
juniper
Link down link down link down
syslog
syslog
syslog

ip interface oper
status

IIPInterface F

maj

Juniper
Link up
syslog

juniper
juniper
link down link up
syslog
syslog

ip interface oper
status

IIPInterface F

clr

Juniper
OSPF
neighbor
down
syslog
Juniper
OSPF
neighbor
up syslog

juniper
ospf
neighbor
syslog

juniper
ospf
neighbor
syslog

IPhysicalLa T
yer

maj

juniper
ospf
neighbor
syslog

juniper
ospf
neighbor
up syslog

IPhysicalLa F
yer

clr

IModule

maj

IModule

maj

juniper
ldp
session
up syslog

Severity

Expedites
Polling

Subtype
Value

Event Type

Juniper
juniper
juniper
sib offline sib offline sib

Is Ticketable

Is Correlation
Allowed

juniper
ldp
session
down
syslog

Event Source
(IMO Name)
ILse

Juniper
LDP
session
up syslog

Event
Subtype

Short
Description

Correlate

Juniper M-Series Syslogs Registry Parameters (Continued)

Activate Flow

Table 11-8

offline
Juniper
sib reset

juniper
sib reset

juniper
sib reset

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-22

OL-24429-01

Chapter 11

Syslogs
Juniper MX-Series Syslogs Registry Parameters

Juniper MX-Series Syslogs Registry Parameters


Table 11-9 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
Juniper MX-Series Syslogs Registry Parameters shown in Table 11-4.

Weight

Auto Clear

Auto Remove

Flapping

IMpBgp

maj

Juniper
BGPneigh
bor up
syslog

Juniper
bgp
neighbor
down
syslog

Juniper
bgp
neighbor
up syslog

bgp-process-state,
bgp neighbours

IMpBgp

clr

Juniper
BGP peer
init

Juniper
bgp peer
init

Juniper
bgp peer
init

IPhysicalLa T
yer

maj

Juniper
bgp reset

Juniper
bgp reset

Juniper
bgp reset

IPhysicalLa T
yer

maj

Juniper
BGP
Connectio
n Started
Juniper
BGP task
connect

Juniper
bgp
started

Juniper
bgp
started

IPhysicalLa T
yer

maj

Juniper
bgp task
connect

Juniper
bgp task
connect

IPhysicalLa T
yer

maj

Juniper
bgp
timeout

Juniper
bgp
timeout

Juniper
bgp
timeout

IPhysicalLa T
yer

maj

Juniper
card out
syslog

Juniper
card out
syslog

Juniper
card out
syslog

physical command

IModule

maj

Juniper
card in
syslog

Juniper
card out
syslog

Juniper
card in
syslog

physical command

IModule

clr

physical command

IModule

maj

Severity

Subtype
Value

Event Type

Juniper
Juniper
Juniper
fru power fru power fru power
off syslog off syslog off syslog

Is Ticketable

Is Correlation
Allowed

bgp-process-state,
bgp neighbours

Event Source
(IMO Name)

Juniper
bgp
neighbor
down
syslog

Expedites
Polling

Juniper
bgp
neighbor
down
syslog

Event
Subtype

Juniper
BGP
neighbor
down
syslog

Short
Description

Correlate

Juniper MX-Series Syslogs Registry Parameters

Activate Flow

Table 11-9

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-23

Chapter 11

Syslogs

Juniper MX-Series Syslogs Registry Parameters

Weight

Auto Clear

Auto Remove

Flapping

clr

Juniper
LDP
neighbor
down
syslog

Juniper
ldp
neighbor
down
syslog

Juniper
ldp
neighbor
down
syslog

mpls interfaces,
label switching
table

ILse

maj

Juniper
LDP
neighbor
up syslog

Juniper
ldp
neighbor
down
syslog

Juniper
ldp
neighbor
up syslog

mpls interfaces,
label switching
table

ILse

clr

Juniper
LDP
session
down
syslog

Juniper
ldp
session
down
syslog

Juniper
ldp
session
down
syslog

ILse

maj

Juniper
LDP
session
up syslog

Juniper
ldp
session
down
syslog

Juniper
ldp
session
up syslog

ILse

clr

Juniper
Juniper
Juniper
Link down link down link down
syslog
syslog
syslog

ip interface oper
status

IIPInterface F

maj

Juniper
Link up
syslog

Juniper
Juniper
link down link up
syslog
syslog

ip interface oper
status

IIPInterface F

clr

Juniper
OSPF
neighbor
down
syslog
Juniper
OSPF
neighbor
up syslog

Juniper
ospf
neighbor
syslog

Juniper
ospf
neighbor
syslog

IPhysicalLa T
yer

maj

Juniper
ospf
neighbor
syslog

Juniper
ospf
neighbor
up syslog

IPhysicalLa F
yer

clr

Severity

Expedites
Polling

Subtype
Value

Event Type

Is Ticketable

Is Correlation
Allowed

IModule

Event Source
(IMO Name)

physical command

Event
Subtype

Juniper
Juniper
Juniperfr
fru power fru power u power
on syslog off syslog on syslog

Short
Description

Correlate

Juniper MX-Series Syslogs Registry Parameters (Continued)

Activate Flow

Table 11-9

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-24

OL-24429-01

Chapter 11

Syslogs
Juniper T-Series Syslogs Registry Parameters

Correlate

Is Correlation
Allowed

Weight

Auto Clear

Auto Remove

Flapping

maj

IModule

maj

Severity

Is Ticketable

Activate Flow

Juniper
Juniper
Juniper
sib offline sib offline sib

Event Source
(IMO Name)
IModule

Expedites
Polling
N

Subtype
Value

Event Type

Event
Subtype

Juniper MX-Series Syslogs Registry Parameters (Continued)

Short
Description

Table 11-9

offline
Juniper
sib reset

Juniper
sib reset

Juniper
sib reset

Juniper T-Series Syslogs Registry Parameters


Juniper T-Series Syslogs Registery Parameters supported in Cisco ANA is the same as the Juniper
M-Series Syslogs Register Parameters. For more details on the Juniper M-Series Syslogs see Table 11-8

RAD ACE Syslogs Registry Parameters


Table 11-10 lists the associated event types, event subtypes, and Cisco ANA registry parameters for the
RAD ACE Syslogs Registry Parameters shown in Table 11-5.

info

Flapping

Auto Remove

Is Ticketable

Severity

Auto Clear

IManagedE F
lement

Weight

Activate Flow

Event Source
(IMO Name)

Expedites
Polling
N

Is Correlation
Allowed

generic
syslog

Subtype
Value

Event Type
generic
syslog

Correlate

Generic
syslog

Event
Subtype

RAD ACE Syslogs Registry Parameters

Short
Description

Table 11-10

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

11-25

Chapter 11

Syslogs

RAD ACE Syslogs Registry Parameters

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

11-26

OL-24429-01

CH A P T E R

12

VNE Customization Builder


This chapter introduces the Virtual Network Element Customization Builder (VCB) in Cisco Active
Network Abstraction (Cisco ANA),
This chapter contains the following topics:

About the VCB, page 12-1

VCB Template Reference, page 12-2

About the VCB


The VCB is a command-line tool for Cisco ANA admin users to addto an installed Cisco ANA system
and for their own supportnetwork elements (NEs), modules, and events, thereby extending what is
delivered in Cisco ANA software. The VCB is installed when you install Cisco ANA and is targeted at
professional service organizations and other power users.
Use the VCB to customize VNE drivers in the installed Cisco ANA at the customer site for additional
discovery and recognition of the following:

Note

CardsEnable Cisco ANA to recognize cards that would otherwise be treated as Unknown.

Syslogs and trapsEnable Cisco ANA to process a syslog or a trap as a Cisco ANA event.

Traps in a MIBProvide MIBs as input to the VCB to produce a list of unsupported traps for a
particular MIB, alternatively to produce an editable script to run to add the unsupported traps as
Cisco ANA events.

NE maintenance softwareEnable VNE driver to recognize a maintenance software release of a


device assuming that the management interface has not changed.

Devices that extend an NE typeClone from an existing VNE driver to manage new devices which
has compatible management interface and fit within an existing supported device family.

ANA 3.7.2 and 3.7.3 supports only Cards and Syslogs/Traps that are associated with managed element.
Use the VCB to create user-defined VNE drivers for discovery of unsupported devices based on U-VNE
templates. When using a U-VNE template, you must investigate the management interface
instrumentation in the device and determine how closely it matches with those used in the U-VNE
template.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-1

Chapter 12

VNE Customization Builder

VCB Template Reference

Customizations using the VCB affect VNE drivers and update the Cisco ANA registry in a safe manner.
The VCB enables you to roll back easily; you can remove:

All VCB customizations with one command, restoring your system to a factory-defined state.

Selective VCB customizations, using one command per customization that you want to remove.

Because VCB customizations are carried forward during an upgrade to a new version of Cisco ANA,
your customizations continue to override any new or updated VNE drivers or newly supported events
and modules. The ability to remove changes selectively enables you to discontinue particular overrides
only and take advantage of any newly added support.
Briefly, the VCB works as follows:

You select vcb commands and templates and supply parameters.

The VCB writes extensions into a local registry file, site.xml, thereby avoiding impact on the Cisco
ANA code. You do not need to know a great deal about the Cisco ANA registry to use the VCB.

You verify the extension using your test resources, such as a simulator

For more information about VNE Customization Builder, see Cisco Active Network Abstraction 3.7.2
Customization User Guide.

VCB Template Reference


Module Templates

Note

Module templates are applicable to standard modules only (not pluggable modules). You do not need to
use a module template to add a pluggable module.
Module templates define a set of port layersfrom the connector at Layer 0 to encapsulation at
Layer 2that are applicable to a module. For example, typical port layers for an OC3 ATM card are:

Layer 0Fiber Optic

Layer 1OC-3

Layer 2ATM

Use module templates to enable developed VNEs to recognize new modules.

Note

You cannot add modules to generic U-VNEs.


Module templates ensure that each port is modeled with the correct port layer information based on the
ifType obtained from the SNMP MIB output.
Event Templates

Event templates work together to extract information from a syslog or a trap and to generate the keys
and the location ID for associating a Cisco ANA event with a managed element device component.
For more information, see the Cisco Active Network Abstraction 3.7.2 Customization User Guide.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-2

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Module Groups and Module Specification Files

Note

Unlike the modeling that Cisco ANA does for standard modules, Cisco ANA models only the ports for
pluggable modules. The only module group for pluggable modules is the pluggable-ports-spec file. The
remainder of this section applies to standard modules only (not pluggable modules).
A module group is the name of a vendor-specific module specification file that is stored in the Cisco
ANA registry. A module specification file is an XML file that lists supported modules and other
properties, such as port layers and sysOID. When you use vcb module commands to add, modify, or
delete a module:

Note

You provide the name of a module specification file as an argument to the -group option.

The VCB modifies the module specification file: adding, updating, or deleting the module
definition.

The VCB allows you to update and delete only those modules that you added using the VCB.

Juniper Template Reference


This section contains the following topic:

Module Templates, page 12-3

Event Templates, page 12-7

Module Templates
This section contains the following topics:

Module Groups and Module Specification Files, page 12-3

Module Templates by Technology, page 12-9

For more information, see Module Templates, page 12-2

Module Groups and Module Specification Files


For more information, see Module Groups and Module Specification Files, page 12-3.
Cisco ANA 3.7.2 and 3.7.3 enables you to extend the juniper-junos-physicalspec module specification
file.
Table 12-1 summarizes the technologies that are supported and the module templates that are provided
in the module specification files. For more information about a module template, use the link in the
Technologies column.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-3

Chapter 12

VNE Customization Builder

VCB Template Reference

Table 12-1

Module Group Summary for Standard ModulesCisco ANA Version 3.7.2 and 3.7.3

Module Group

Technologies

juniper-junos-physicalspec Ethernet (Fixed),


page 12-5

POS (Fixed), page 12-5


POS (Multiloader),
page 12-5

A10GigaEthernet

gigaEthernet

fxp

ethernet-over-baseband

gigabit ethernet over baseband

gigabit-ethernet-over-fiber

ppp over oc48

ppp over oc12

ppp over oc192

ppp-over-oc3

Channelized T1/E1
(Fixed), page 12-6

E3Default

E1

ATM (Fixed), page 12-6

atmDefault

atm over oc12

atm over ds3

layer2-over-ds3

layer2-over-oc12

layer2-over-oc48

layer2-over-oc3

ATM (Multiloader),
page 12-6

juniper-screenos-physicals
pec

Template Names

Multitechnology,
page 12-7

MultiTechnologiesModuleDefault

Generic, page 12-7

DefaultLoader

Ethernet (Fixed),
page 12-5

SfpGigaEthernetDefault

FastEthernetDefault

Module Templates by Technology


This section presents module templates organized by technology:

Ethernet (Fixed), page 12-5

POS (Fixed), page 12-5

POS (Multiloader), page 12-5

Channelized T1/E1 (Fixed), page 12-6

ATM (Fixed), page 12-6

ATM (Multiloader), page 12-6

Multitechnology, page 12-7

Generic, page 12-7

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-4

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Ethernet (Fixed)

Table 12-2 lists module templates for Etherenet (Fixed).


Table 12-2

Module TemplatesEthernet (Fixed)

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

A10GigaEthernet

Fiber optic

EthernetCSMA/
CD

10 Gigabit
Ethernet

PIC:110GE(LAN),XENPAK

gigaEthernet

Fiber optic

EthernetCSMA/
CD

Gigabit
Ethernet

PIC: 101GE(LAN)

fxp

RJ45

EthernetCSMA/
CD

Ethernet

FPC

ethernet-over-baseba
nd

RJ45

EthernetCSMA/
CD

Ethernet

PIC: 4F/E, 10 BASE-TX

gigabit ethernet over


baseband

RJ45

EthernetCSMA/
CD

Ethernet

PIC: 2F/E, 100 BASE-TX

gigabit-ethernet-over- Fiber optic


fiber

EthernetCSMA/
CD

Ethernet

PIC: 110GE(LAN/WAN)
IQ2

SfpGigaEthernetDefa RJ45
ult

EthernetCSMA/
CD

Gigabit
Ethernet

Management-Board II,
Processing- 8G2

FastEthernetDefault

EthernetCSMA/
CD

Fast
Ethernet

Management-Board II,
Processing- 8G2

RJ45

POS (Fixed)

Table 12-3 lists module templates for POS (Fixed).


Table 12-3

Module TemplatesPOS (Fixed)

Template Name

Layer 0

Layer 1

Layer 2

ppp over oc48

Fiber optic

OC48

PPP

Examples Modules

POS (Multiloader)

Table 12-4 lists module templates for POS (Multiloader).


Table 12-4

Module TemplatesPOS (Multiloader)

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

ppp over oc12

Fiber optic

OC12

PPP

ppp over oc192

Fiber optic

OC192

PPP

PIC: 1OC-192 SM SR1

ppp-over-oc3

Fiber optic

OC3

PPP

jnxM20QuadSonetOc3

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-5

Chapter 12

VNE Customization Builder

VCB Template Reference

Channelized T1/E1 (Fixed)

Table 12-5 lists module templates for Channelized T1/E1 (Fixed).


Table 12-5

Module TemplatesChannelized T1/E1 (Fixed)

Template Name

Layer 0

Layer 1

Layer 2

E3 Default

BNC

DS3

E1

RJ48

DS1

PPP

Examples Modules
PIC: 4E1, RJ48

ATM (Fixed)

Table 12-6 lists module templates for ATM (Fixed).


Table 12-6

Module TemplatesATM (Fixed)

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

atmDefault

Fiber optic

OC3

ATM

PIC: 2OC-3 ATM-II IQ, SMIR

atm over oc12

Fiber optic

OC12

ATM

atm over ds3

BNC

DS3

ATM

jnxM20QuadSonetOc3

ATM (Multiloader)

Table 12-7 lists module templates for ATM (Multiloader).


Table 12-7

Module TemplatesATM (Multiloader)

Template Name

Layer 0

Layer 1

layer2-over-ds3

BNC

DS3

layer2-over-oc12

layer2-over-oc48

layer2-over-oc3

Fiber optic

Fiber optic

Fiber optic

OC12

OC48

OC3

Layer 2

Examples Modules

PPP

PIC: 2T3

HDLC

PIC: 10CHE1 IQ

Frame relay

ATM

PPP

HDLC

Frame relay

ATM

PPP

HDLC

Frame relay

ATM

PPP

HDLC

Frame relay

ATM

PIC: 1CHOC12 IQ SONET,


SMIR

PIC: 1STM-16 SDH, SMSR

PIC: 2OC-3 SONET, MM

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-6

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Multitechnology

Table 12-8 lists module templates for Multitechnology.


Table 12-8

Module TemplatesMultitechnology

Template Name

Layer 0

MultiTechnologies
ModuleDefault

RJ11

RJ45

Layer 1

RJ48

Fiber optic

DB60

Layer 2

EthernetCSMA/
CD

DS1

Examples Modules

Fast Ethernet

Gigabit
Ethernet

E1

PPP

OC3

HDLC

ADSL

Frame relay

Serial

ATM

Generic

Table 12-9 lists module templates for Generic.


Table 12-9

Module TemplatesGeneric

Template Name

Layer 0

DefaultLoader

RJ45

Layer 1

Layer 2

Examples Modules

Event Templates
Table 12-10 lists the repositories and parsing rules files for Juniper.
Table 12-10

Parsing Rules and Repositories

Parsing Rules Files

Repository Files

Select based on the scheme and whether you are


adding support for a trap or a syslog:

Select based on whether you are supporting


a syslog or a trap:

product scheme:

juniper-syslog-product-parsing-rules
juniper-trap-product-parsing-rules

ipcore scheme:

Syslog:
juniper-syslog-repository

Trap:
juniper-traps-repository

juniper-syslog-ipcore-parsing-rules

mib2-trap-repository1

juniper-trap-ipcore-parsing-rules

juniper-netscreen-trap-repository

juniper-netscreen-trap-ipcore-parsing-rules
1. Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select juniper-traps-repository.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-7

Chapter 12

VNE Customization Builder

VCB Template Reference

Alcatel Template Reference


This section contains the following topic:

Module Templates, page 12-8

Event Templates, page 12-14

Module Templates
This section contains the following topics:

Module Groups and Module Specification Files, page 12-8

Module Templates by Technology, page 12-9

For more information, see Module Templates, page 12-2.

Module Groups and Module Specification Files


For more information, see Module Groups and Module Specification Files, page 12-3.
Cisco ANA 3.7.2 and 3.7.3 enables you to extend the alcatel-ess-physicalspec module specification files.
Table 12-11 summarizes the technologies that are supported and the module templates that are provided
in the module specification files. For more information about a module template, use the link in the
Technologies column.
Table 12-11

Module Group Summary for Standard ModulesCisco ANA Version 3.7.2 and 3.7.3

Module Group

Technologies

alcatel-ess-physicalspec

Ethernet(Fixed),
page 12-9

Channelized OCXX
(Fixed), page 12-13

alcatel-sar-physical-spec

Ethernet(Fixed),
page 12-9

Channelized OCXX
(Fixed), page 12-13

Template Names

ethernetDefault

faEthernetDefault

gigaEthernetDefault

OC3-default

OC12-default

OC48-default

ethernetDefault

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

faEthernetRJ48Default

faEthernetFiberDefault

gigaRJ48Default

gigaEthernetFiberDefault

gigaEthernetDefault

OC12-default

OC3-default

OC48-default

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-8

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Table 12-11

Module Group Summary for Standard ModulesCisco ANA Version 3.7.2 and 3.7.3

Module Group

Technologies

alcatel-sr-physical-spec

Ethernet(Fixed),
page 12-9

ethernetDefault

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

faEthernetRJ48Default

faEthernetFiberDefault

gigaRJ48Default

gigaEthernetFiberDefault

gigaEthernetDefault

OC12-default

OC3-default

OC48-default

OC192-default

Ethernet(Fixed),
page 12-9

117

ATM (Fixed), page 12-11

168

18

19

249

30

39

94

Channelized OCXX
(Fixed), page 12-13

alcatelasamphysicalspec

Template Names

Module Templates by Technology


This section presents module templates organized by technology:

Ethernet(Fixed), page 12-9

Channelized OCXX (Fixed), page 12-13

Ethernet(Fixed)

Table 12-12 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7450 ESS.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-9

Chapter 12

VNE Customization Builder

VCB Template Reference

Table 12-12

Module TemplatesEthernet(Fixed) for Alcatel-Lucent 7450 ESS

Template Name

Layer 0

Layer 1

ethernetDefault

RJ45

EthernetCSMA
/CD

Layer 2

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Examples Modules
MDA 20 Ports 10/100/1000
Ethernet TX

faEthernetDefault

RJ45

EthernetCSMA Fast Ethernet


/CD

MDA 60 Ports 10/100


Ethernet TX

gigaEthernetDefault

Fiber Optic

EthernetCSMA Gigabit
/CD
Ethernet

MDA 10 Ports 1-Gigabit


Ethernet SFP

Table 12-13 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7705 SAR.
Table 12-13

Module TemplatesEthernet(Fixed) for Alcatel-Lucent 7705 SAR

Template Name

Layer 0

Layer 1

ethernetDefault

RJ45

EthernetCSMA
/CD

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

RJ48

Fiber optic

EthernetCSMA
/CD

EthernetCSMA
/CD

Layer 2

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Examples Modules
MDA 6 10/100 Ethernet, 2
Port 1-Gigabit SFP

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

RJ45

EthernetCSMA Fast Ethernet


/CD

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

faEthernetRJ48Defau RJ48
lt

EthernetCSMA Fast Ethernet


/CD

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

faEthernetFiberDefau Fiber optic


lt

EthernetCSMA Fast Ethernet


/CD

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

gigaEthernetDefault

EthernetCSMA Gigabit
/CD
Ethernet

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

RJ45

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-10

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Table 12-13

Module TemplatesEthernet(Fixed) for Alcatel-Lucent 7705 SAR (Continued)

Template Name

Layer 0

Layer 1

gigaRJ48Default

RJ48

EthernetCSMA Gigabit
/CD
Ethernet

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

EthernetCSMA Gigabit
/CD
Ethernet

MDA 6 10/100 Ethernet, 2


Port 1-Gigabit SFP

gigaEthernetFiberDef Fiber optic


ault

Layer 2

Examples Modules

Table 12-14 lists module templates for Ethernet(Fixed) for Alcatel-Lucent ATM Subscriber Access
Multiplexer.
Table 12-14

Module TemplatesEthernet(Fixed) for Alcatel-Lucent ATM Subscriber Access


Multiplexer

Template Name

Layer 0

Layer 1

Layer 2

117

RJ45

EthernetCSMA Gigabit
/CD
Ethernet

RJ45

EthernetCSMA Fast Ethernet


/CD

Examples Modules

ATM (Fixed)

Table 12-15 lists module templates for ATM (Fixed) for Alcatel-Lucent ATM Subscriber Access
Multiplexer.
Table 12-15

Module TemplatesATM (Fixed) Alcatel-Lucent ATM Subscriber Access Multiplexer

Template Name

Layer 0

Layer 1

Layer 2

169

RJ11

SHDSL

EdgeAT
M

18

BNC

DS1

ATM

19

RJ48

DS1

249

RJ11

ADSL2

EdgeAT
M

30

BNC

DS3

ATM

39

FiberOptic

OC3

ATM

94

RJ11

ADSL

EdgeAT
M

Examples Modules

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-11

Chapter 12

VNE Customization Builder

VCB Template Reference

Table 12-16 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7750/7710 SR.
Table 12-16

Module TemplatesEthernet(Fixed) for Alcatel-Lucent 7750/7710 SR

Template Name

Layer 0

Layer 1

ethernetDefault

RJ45

EthernetCSMA
/CD

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

RJ48

Fiber optic

EthernetCSMA
/CD

EthernetCSMA
/CD

Layer 2

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Ethernet

Fast
Ethernet

Gigabit
Ethernet

Examples Modules
MDA 10-Port 10/100/1000
Ethernet Extended
Performance SFP

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

RJ45

EthernetCSMA Fast Ethernet


/CD

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

faEthernetRJ48Defau RJ48
lt

EthernetCSMA Fast Ethernet


/CD

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

faEthernetFiberDefau Fiber optic


lt

EthernetCSMA Fast Ethernet


/CD

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

gigaEthernetDefault

RJ45

EthernetCSMA Gigabit
/CD
Ethernet

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

gigaRJ48Default

RJ48

EthernetCSMA Gigabit
/CD
Ethernet

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

EthernetCSMA Gigabit
/CD
Ethernet

MDA 10-Port 10/100/1000


Ethernet Extended
Performance SFP

gigaEthernetFiberDef Fiber optic


ault

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-12

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Channelized OCXX (Fixed)

Table 12-17 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7450 ESS.
Table 12-17

Module TemplatesChannelized OCXX (Fixed) for Alcatel-Lucent 7450 ESS

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

OC3-default

Fiber optic

OC3

MDA 16 Ports OC3 SFP

OC12-default

Fiber optic

OC12

MDA 16 Ports OC12/OC3 SFP

OC48-default

Fiber optic

OC48

MDA 4 Ports OC48 SFP

Table 12-18 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7705 SAR.
Table 12-18

Module TemplatesChannelized OCXX (Fixed) for Alcatel-Lucent 7705 SAR

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

OC3-default

Fiber optic

OC3

MDA 4 Port OC3 SFP

OC12-default

Fiber optic

OC12

OC48-default

Fiber optic

OC48

OC192-default

Fiber optic

OC192

Table 12-19 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7750/7710 SR.
Table 12-19

Module TemplatesChannelized OCXX (Fixed) for Alcatel-Lucent 7750/7710 SR

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

OC3-default

Fiber optic

OC3

MDA 8-Port OC3 SFP

OC12-default

Fiber optic

OC12

MDA 4-Port ATM OC12/OC3

OC48-default

Fiber optic

OC48

MDA 2 Ports OC48 SFP

OC192-default

Fiber optic

OC192

MDA 1-Port OC192

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-13

Chapter 12

VNE Customization Builder

VCB Template Reference

Event Templates
Table 12-20 lists the repositories and parsing rules files for Alcatel.
Table 12-20

Parsing Rules and Repositories

Parsing Rules Files

Repository Files

Select based on the scheme and whether you are


adding support for a trap or a syslog:

Select based on whether you are supporting


a syslog or a trap:

product scheme:

Trap:

alcatel-ess-syslog-product-parsing-rules

alcatel-7450-trap-repository

alcatel-ess-trap-product-parsing-rules

alcatel-7705-trap-repository

alcatel-sar-syslog-product-parsing-rules

alcatel-7750/7710-trap-repository

alcatel-sar-trap-product-parsing-rules

mib2-trap-repository1

alcatel-sr-syslog-ipcore-parsing-rules

alcatel-trap-repository

alcatel-sr-trap-ipcore-parsing-rules
alcatel-asam-trap-product-parsing-rules
1. Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.

Huawei Template Reference


This section contains the following topic:

Module Templates, page 12-14

Event Templates, page 12-18

Module Templates
This section contains the following topics:

Module Groups and Module Specification Files, page 12-14

Module Templates by Technology, page 12-15

For more information, see Module Templates, page 12-2.

Module Groups and Module Specification Files


For more information, see Module Groups and Module Specification Files, page 12-3.
Cisco ANA 3.7.2 and 3.7.3 enables you to extend the huawei-trs-physicalspec module specification files.
Table 12-21 summarizes the technologies that are supported and the module templates that are provided
in the module specification files. For more information about a module template, use the link in the
Technologies column.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-14

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Table 12-21

Module Group Summary for Standard ModulesCisco ANA Version 3.7.2 and 3.7.3

Module Group

Technologies

huawei-trs-physicalspec

Ethernet(Fixed),
page 12-15

Template Names

ethernetDefault

ethernet-default-over-optic

gigaEthernetDefault

A10GigaEthernet

ethernetFiberDefault

gigaEthernet

ethernetDefault1

fastEthernetFiberDefault

gigaEthernetFiberDefault

fastEthernetDefault

Ethernet (Multiloader),
page 12-16

E1OrEthOrGig

Channelized T1/E1,
page 12-17

E1Default

ATM (Fixed), page 12-17


POS (Fixed), page 12-17

DS1Default

AtmDefault

FiberDefault-pos

FiberDefault-pos-ppp

Generic, page 12-17

generic-port

Multitechnology,
page 12-18

MultiTechnologiesModuleDefault

Module Templates by Technology


This section presents module templates organized by technology:

Ethernet(Fixed), page 12-15

Ethernet (Multiloader), page 12-16

Channelized T1/E1, page 12-17

ATM (Fixed), page 12-17

POS (Fixed), page 12-17

Generic, page 12-17

Multitechnology, page 12-18

Ethernet(Fixed)

Table 12-22 lists module templates for Ethernet(Fixed).

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-15

Chapter 12

VNE Customization Builder

VCB Template Reference

Table 12-22

Module TemplatesEthernet(Fixed)

Template Name

Layer 0

Layer 1

ethernetDefault

RJ45

EthernetCSMA
/CD

ethernet-default-over- Fiber optic


optic

EthernetCSMA
/CD

Layer 2

Ethernet

Fast
Ethernet

10 Gigabit
Ethernet

Gigabit
Ethernet

Ethernet

Fast
Ethernet

10 Gigabit
Ethernet

Gigabit
Ethernet

Examples Modules

G24SC

gigaEthernetDefault

RJ45

Ethernet
CSMA/CD

Gigabit
Ethernet

AND1EG2

A10GigaEthernet

Fiber optic

Ethernet
CSMA/CD

10 Gigabit
Ethernet

CR52L2XXNB

ethernetFiberDefault

Fiber optic

Ethernet
CSMA/CD

Ethernet

CR52EEGFNB

gigaEthernet

Fiber optic

Ethernet
CSMA/CD

Gigabit
Ethernet

ethernetDefault1

RJ45

Ethernet
CSMA/CD

Ethernet

AND1VIRCARD

fastEthernetFiberDef
ault

Fiber optic

Ethernet
CSMA/CD

Ethernet

CR52EEGFNB

gigaEthernetFiberDef Fiber optic


ault

Ethernet
CSMA/CD

Gigabit
Ethernet

CR52EEGFNB

fastEthernetDefault

Ethernet
CSMA/CD

Fast Ethernet

AND1VIRCARD

RJ45

Ethernet (Multiloader)

Table 12-23 lists module templates for Ethernet (Multiloader).


Table 12-23

Module TemplatesEthernet (Multiloader)

Template Name

Layer 0

Layer 1

E1OrEthOrGig

RJ45

E1

Layer 2

Examples Modules

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-16

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

Channelized T1/E1

Table 12-24 lists module templates for Channelized T1/E1.


Table 12-24

Module TemplatesChannelized T1/E1

Template Name

Layer 0

Layer 1

E1Default

RJ45

E1

Layer 2

Examples Modules
AND1VIRCARD

ATM (Fixed)

Table 12-25 lists module templates for ATM (Fixed).


Table 12-25

Module TemplatesATM (Fixed)

Template Name

Layer 0

Layer 1

DS1Default

DS1
connector

DS1

AtmDefault

Fiber optic

OC3

Layer 2

Examples Modules
AND1VIRCARD

ATM

CR53A4CF

POS (Fixed)

Table 12-26 lists module templates for POS (Fixed).


Table 12-26

Module TemplatesPOS (Fixed)

Template Name

Layer 0

Layer 1

Layer 2

Examples Modules

FiberDefault-pos

Fiber optic

OC3

PPP

CX67C1CF0

FiberDefault-pos-ppp Fiber optic

OC3

PPP

CR53P8CF

Layer 2

Examples Modules

Generic

Table 12-27 lists module templates for Generic.


Table 12-27

Module TemplatesGeneric

Template Name

Layer 0

Layer 1

generic-port

POS
Connector

Generic Layer 1 Generic Layer


2

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-17

Chapter 12

VNE Customization Builder

VCB Template Reference

Multitechnology

Table 12-28 lists module templates for Multitechnology.


Table 12-28

Module TemplatesMultitechnology

Template Name

Layer 0

MultiTechnologies
ModuleDefault

RJ11

RJ45

RJ48

Fiber optic

DB60

Layer 1

Layer 2

EthernetCSMA/
CD

Fast Ethernet

DS1

Gigabit
Ethernet

E1

PPP

OC3

HDLC

ADSL

Frame relay

Serial

ATM

Examples Modules

Event Templates
Table 12-29 lists the repositories and parsing rules files for Huawei.
Table 12-29

Parsing Rules and Repositories

Parsing Rules Files

Repository Files

Select based on the scheme and whether you are


adding support for a trap or a syslog:

Select based on whether you are supporting


a syslog or a trap:

product scheme:
huawei-trs-trap-ipcore-parsing-rules

Trap:
mib2-trap-repository1
huawei-trap-repository

1. Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.

Tellabs Template Reference


This section contains the following topic:

Module Templates, page 12-14

Event Templates, page 12-20

Module Templates
This section contains the following topics:

Module Groups and Module Specification Files, page 12-14

Module Templates by Technology, page 12-15

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-18

OL-24429-01

Chapter 12

VNE Customization Builder


VCB Template Reference

For more information, see Module Templates, page 12-2.

Module Groups and Module Specification Files


For more information, see Module Groups and Module Specification Files, page 12-3.
Cisco ANA 3.7.2 and 3.7.3 enables you to extend the tellabs-msr-physicalspec module specification
files.
Table 12-21 summarizes the technologies that are supported and the module templates that are provided
in the module specification files. For more information about a module template, use the link in the
Technologies column.
Table 12-30

Module Group Summary for Standard ModulesCisco ANA Version 3.7.2 and 3.7.3

Module Group

Technologies

tellabs-msr-physicalspec

Ethernet(Fixed),
page 12-19

ATM (Fixed), page 12-20

Generic, page 12-20

Template Names

A10GigaEthernet

GigabitEthernetDefault

FastEthernetDefault

E3Default

ADSL2Default

DS1Default

SHDSLDefault

DefaultLoader

Module Templates by Technology


This section presents module templates organized by technology:

Ethernet(Fixed), page 12-19

ATM (Fixed), page 12-20

Generic, page 12-20

Ethernet(Fixed)

Table 12-31 lists module templates for Ethernet(Fixed).


Table 12-31

Module TemplatesEthernet(Fixed)

Template Name

Layer 0

Layer 1

Layer 2

A10GigaEthernet

Fiber optic

EthernetCSMA 10 Gigabit
/CD
Ethernet

GigabitEthernetDefa
ult

Fiber optic

EthernetCSMA Gigabit
/CD
Ethernet

FastEthernetDefault

RJ45

EthernetCSMA Fast Ethernet


/CD

Examples Modules

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide
OL-24429-01

12-19

Chapter 12

VNE Customization Builder

VCB Template Reference

ATM (Fixed)

Table 12-32 lists module templates for ATM (Fixed).


Table 12-32

Module TemplatesATM (Fixed)

Template Name

Layer 0

Layer 1

ADSL2Default

RJ45

ADSL2

DS1Default

RJ45

DS1

E3Default

BNC

DS3

SHDSLDefault

RJ45

SHDSL

Layer 2

Examples Modules

ATM
EdgeATM

Generic

Table 12-33 lists module templates for Generic.


Table 12-33

Module TemplatesGeneric

Template Name

Layer 0

DefaultLoader

RJ45

Layer 1

Layer 2

Examples Modules

Event Templates
Table 12-34 lists the repositories and parsing rules files for Tellabs.
Table 12-34

Parsing Rules and Repositories

Parsing Rules Files

Repository Files

Select based on the scheme and whether you are


adding support for a trap or a syslog:

Select based on whether you are supporting


a syslog or a trap:

product scheme:
tellabs-msr-trap-product-parsing-rules

Trap:
tellabs-trap-repository
tellabs-msr-trap-repository
mib2-trap-repository1

1. Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.

Cisco Active Network Abstraction 3.7.2 and 3.7.3 Device Package Third-Party VNE Reference Guide

12-20

OL-24429-01

You might also like