Professional Documents
Culture Documents
INDEX
SEMI-FRAMELESS SYSTEMS
(VECTRO / NEO / SPECTRA)
SEMI FRAMELESS POST SECTION
SEMI FRAMELESS HANDRAILS
SEMI FRAMELESS ASSEMBLY DETAILS
ENGINEERING COMPUTATIONS
AXILUME GLAZING CHANNELS
AXILUME POST SECTION
AXILUME MODULAR SYSTEM
PLEASE CONTACT AXIOM FOR MORE INFORMATION
AXIOM DESIGN
YOUR VIEW / YOUR STYLE
Axiom Design is an established business
committed to providing balustrade and
glazing systems to fulll your architectural
requirements.
Axiom specialises in its own proprietary
systems but has the experience and
resource to fabricate your design.
Axilume balustrade systems offer visual
freedom and a spacious feel for your deck,
balcony or pool surrounds.
FRAMELESS
EZM
GLAZING CHANNEL
AZC
GLAZING CHANNEL
EZF
GLAZING CHANNEL
ARN
TOP RAIL
AXNG
GLAZING CHANNEL
AZD
GLAZING CHANNEL
RRS
TOP RAIL
SEMI-FRAMELESS
AXR / POST
APE / POST
APR / POST
APQ / POST
SETTLER / STYLE
HERITAGE / STYLE
VISTA / GLAZED
CLASSIC / GLAZED
CUSTOM DESIGNS
INTRODUCTION
INTRODUCTION
MATERIALS
AXILUME SYSTEMS
Axiom Design specialises in the design and supply of
architectural balustrades. With origins dating back to the
early 80s, Axiom has supplied balustrading to thousands
of projects in Australia and abroad. As a result Axiom has
acquired extensive experience in this eld.
ALUMINIUM
The principal members of all Axilume Balustrade
systems are made from 6000 series extruded aluminium
alloys, which have been selected for their strength, nish,
and corrosion resistance. The suitability of aluminium
as a durable metal in external environments, even when
unprotected, has been conrmed by some 30 to 40 years
of performance history.
SURFACE FINISHING
INTRODUCTION
One of the advantages of Aluminium as a material is that
it provides an excellent substrate for surface nishing.
Aluminium is therefore the preferred choice of material
where coloured coatings are required. The main coating
method used is Powdercoating. Anodizing is also
available but with a much more limited choice of colour.
POWDERCOATING
Powdercoatings are applied as a powder, electrostatically
charged to provide a uniform lm thickness, followed
by baking and nal oven curing, resulting in a tough,
smooth, and even coating. This process is performed
in factory controlled conditions, and consistently gives
a more uniform and superior nish compared to wet
coating. Powdercoatings also have excellent adhesion to
pretreated aluminium. The use of solvents for cleaning
powdercoated surfaces should be strictly avoided.
ANODIZING
Anodizing is an induced thickening of the natural
protective oxide lm on the metals surface, and not a
coating in the usual sense. The resulting lm is clear,
hard, extremely corrosion resistant, and capable of being
coloured. Colour options are however relatively limited,
with Satin (Natural aluminium colour), Medium Bronze
and Dark Bronze being the main colours economically
available for balustrades. Some accessories, such as cast
endcaps, can not be anodized, and must be powdercoated
in a co-ordinating colour. The depth of the anodized lm
can be varied to suit the application.
The use of abrasives for cleaning should be avoided
as they can damage the anodic layer beyond repair.
2. SURFACE FINISH
While surface nishes do not last forever, observance
of these instructions will maintain their appearance
and signicantly extend their useful life. Observance of
these instructions is also required to achieve Durability
performance and for surface nish warranties to be
valid (where applicable). They apply to both anodized and
powdercoated surfaces.
3. CARE AND PROTECTION
Protect the balustrades at all times from contact with:
:
HWFHPHQWRUSODVWHUSDLQWVSODVKHVFKHPLFDOV
solvents, stains and fertilisers. If contact does occur,
remove the contaminant immediately and wash as
described below.
&
RSSHUEUDVVOHDGPLOGVWHHO&&$WUHDWHGWLPEHU
cement or concrete less than 1 month old, and water
which has contacted any of these substances.
4. CLEANING
The balustrade and its xing points must be cleaned
down at least every six months. In areas where pollutants
are common such as industrial or geothermal areas, and
for all sites within 1 km from the sea or in any sea spray
zone cleaning must be carried out more frequently as
required, but not less than every three months.
5. CLEANING PROCEDURE
a. Remove loose deposits with a wet sponge. Do not
dry dust, or the surfaces will be scratched. Remove
any moss growth, and ensure that all drain holes are
unblocked, particularly those at the base of the posts.
b. Using a soft brush and a mild household detergent
in warm fresh water, clean the surface to remove any
dust, salt, or other deposits. Pay particular attention
to any areas not washed naturally by the rain.
c. Always rinse well after cleaning with fresh water to
remove any remaining detergent.
Warning: Solvents! household cleaners! bleaches! and abrasive cleaners
are possibly harmful to the surface nish! and must not be used.
6. GLOSS
Powdercoated surfaces will lose some gloss with time.
Where desired, powdercoated gloss may be enhanced
with Dulux Gloss Up, used in accordance with the
manufacturers instructions.
FRAMELESS
99.5
AZD2
For supporting free standing glass balustrades, using 10, 12 or 15mm
thick toughened glass. Designed for use on timber decks using two
rows of exposed xings, or on concrete decks using a central row
of xings. May be used with SRA, SRB or SRE retained back seals,
depending on glass thickness. Suitable for pool fencing.
98
60
90.5
EZF2
8.5
84
EZM3
For supporting free standing glass balustrades, using 10,12 or 15mm
thick toughened glass. It is designed for use on parapets, and if
correctly installed, the creation of toeholds may be avoided. It may
also be used for some full height balustrades, subject to relative
design criteria.
60
100.3
AZC
For supporting free standing glass balustrades, using 10,12 or 15mm
thick toughened glass. It is designed for use on parapets, and if
correctly installed, the creation of toeholds may be avoided. It may
also be used for some full height balustrades and pool fenching,
subject to relative design criteria.
60
114.5
AXNG
Non Grout Mechanical x glazing channel for free standing glass
balustrades, using 12, 15mm thick thoughened glass.
As seen in the assembly details glass is clamped into channel using the
AXBC clamping bolt.
The EVF cover cap is to be used on both sides of the channel.
63.5
54
20
51
24
39
30
20
EVF CAP
To be used for EZF & AXNG to cap the mouth of the channel
15
18
71
55
ASSEMBLY DETAIL
EZM3 CHANNEL
METROPOLIS
ASSEMBLY DETAIL
AZC CHANNEL
METROPOLIS
ASSEMBLY DETAIL
EZF2 CHANNEL
METROPOLIS
ASSEMBLY DETAIL
AZD2 CHANNEL
METROPOLIS
METROPLIS
AXNG NON GROUT MECHANICAL
FIX CHANNEL
EVF
Caps
AXBC
AXBC
FIXING DETAILS
AZC GLAZING
CHANNEL
t= topping
thickness
P=
SUBSTRATE LEVEL
23mm
MAX
MINIMUM
DEPTH OF D
EMBEDMENT
35mm MIN
REINFORCED
CONCRETE SLAB
#AZD2 GLAZING
CHANNEL
AZD2 GLAZING
CHANNEL
FASTENERS IN PAIRS,
LOCATED CENTRALLY
ON THE JOISTS
SUBSTRATE LEVEL
P=
19-30mm
DECKING
t= topping
thickness
24mm
MAX
SUBSTRATE LEVEL
MINIMUM
DEPTH OF
EMBEDMENT
140mm
MINIMUM
35mm MIN
JOISTS
REINFORCED
CONCRETE SLAB
FIXING DETAILS
SUBSTRATE LEVEL
23mm
MAX
P=
t= topping
thickness
MINIMUM D
DEPTH OF
EMBEDMENT
35mm MIN
51mm
REINFORCED
CONCRETE SLAB
EZM3 GLAZING
CHANNEL
P=
t= topping
thickness
23mm
MAX
SUBSTRATE LEVEL
MINIMUM D
DEPTH OF
EMBEDMENT
35mm MIN
REINFORCED
CONCRETE SLAB
FIXING DETAILS
P=
t= topping
thickness
23mm
MAX
SUBSTRATE LEVEL
MINIMUM D
DEPTH OF
EMBEDMENT
35mm MIN
REINFORCED
CONCRETE SLAB
SEMI - FRAMELESS
SEMI FRAMELESS
POSTER SECTION
VECTRO/NEO/SPECTRA
50
50
50
50
60
50
56.0
50.0
19.5
24
56
28
54
33
28
Can be used as a small glazing section with use of retained and wedge
gaskets. Also accepts DIA insert as an inll.
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
G
H
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
A FV10-19 screws. 4 per post.
Drill size = 5.5mm .
B
E
F
G
H
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
A
B
C
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
B
AIR inll.
H
J
I
ASSEMBLY DETAILS
FOR SEMI FRAMELESS
BALUSTRADES
Legend
A 19gauge x 19mm screws. 2 per rail
end. Holes size in rail 5.5mm dia.
B ART outer top rail.
A
G
F
POST ASSEMBLY
DETAILS
BALUSTRADES
GENERAL METHOD
SBC Setting Blocks.
AKS Plate.
AIA Insert. Slides into post recess and sits on base plate
with AKS attached to top.
CROSS SECTION
POST ASSEMBLY
DETAILS
BALUSTRADES
GENERAL METHOD
SBC Setting Blocks.
AKS Plate.
AIA Insert. Slides into post recess and sits on base plate
with AKS attached to top.
CROSS SECTION
POST ASSEMBLY
DETAILS
BALUSTRADES
A APR Post
B BSQP Base Plate
C FV 10-38 Screws
D AIR inll
A APQ Post
B EKM Bracket
C SBC Rubber Block
D M5 x 35 Screw
B
D
A APR Post
B EKM Bracket
C M5 x 35 Screw
D SBC Rubber Block
B
C
POST ASSEMBLY
DETAILS
BALUSTRADES
B EKM Bracket
C M5 x 35 Screw
B
A
B
E
B AIR inll
C EKM Bracket
D M5 x 35 Screw
E SBC Rubber Block
SETTING BLOCK
/ BASE PLATE
10
25
25
5
25
25
Used as a setting block on top of glass when attaching a top rail with
silicone and can be used when using EKM type glass mount brackets.
Size 3 x 10 x 25mm, self adhesive.
Use on top of EKM type glass mount brackets to separate glass from metal.
Size 5 x 9 x 25mm, self adhesive.
18
.8
50
16.6
For supporting glass in AZD and EZF channel. Size 50 x 18.8 x 16.6mm
115
75
100
90
63
90
115
90
90
65
For use with APR and APQ recessed posts. 12mm thick. Has 4 x 12.0mm
holes for xing.
MODULAR
FULLY FRAMED
HANDRAIL OPTIONS
ELEGANCE/
Height = 30mm
Width = 79mm
LINEAR/
Height = 24mm
Width = 67mm
NOVUS/
Height = 46mm
Width = 140mm
76 ROUND/
Diameter = 76mm
TRADITIONAL/
Height =48mm
Width = 70mm
MODULAR
FULLY FRAMED
VISTA
SETTLER
CLASSIC
HERITAGE
MODULAR
FULLY FRAMED
STEP ONE
STEP TWO
STEP THREE
MODULAR
FULLY FRAMED
VISTA
Elegance
Elliptical Handrail Shown
Undercap
Isometric view
Top xed or cored drilled
Other handrails
5RXQGWRS
Safety glass
6OLPOLQH
7UDGLWLRQDO
1RYXV
/LQHDU
Post
Elevation view
Safety Glass
Glazing Gasket
Baseplate
Bottom Rail
MODULAR
FULLY FRAMED
CLASSIC
Elegance
Elliptical Handrail Shown
Undercap
Midrail
Isometric view
Top xed or cored drilled
Safety glass
Other handrails
5RXQGWRS
6OLPOLQH
7UDGLWLRQDO
Post
1RYXV
/LQHDU
Elevation view
Safety Glass
Glazing Gasket
Baseplate
Bottom Rail
MODULAR
FULLY FRAMED
SETTLER
Elegance
Elliptical Handrail Shown
Undercap
Isometric view
Top xed or cored drilled
Other handrails
5RXQGWRS
Safety glass
6OLPOLQH
7UDGLWLRQDO
1RYXV
/LQHDU
Post
Elevation view
Baluster
Baseplate
Bottom Rail
MODULAR
FULLY FRAMED
HERITAGE
Elegance
Elliptical Handrail Show
Undercap
Midrail
Isometric view
Top xed or cored drilled
Safety glass
Other handrails
5RXQGWRS
6OLPOLQH
7UDGLWLRQDO
Post
1RYXV
/LQHDU
Elevation view
Baluster
Baseplate
Bottom Rail
NOTES
FRAMELESS SPIGOTS
& GLASS HARDWARE
34
102
38
96
90
57
50
FLOOR
SPRINGS
AXF5001
HEAVY DUTY NON-HOLD OPEN FLOOR SPRING
WITH INTERCHANGEABLE SPINDLE
Comes standard with 5mm spindle (10mm offset)
10mm (15mm offset) and 15mm (20mm offset) extended spindles
available upon request.Maximum door width 1100mm
Maximum door weight 100kgs
Non Hold Open for Pool Gates
DIMS:
Cement Box Size
306mm - Length
108mm - Width
40mm - Height
Adjustment in Cement Box
7mm - Length
10mm - Width
4mm - Height
Cover Available in Satin or Polished 316 Stainless Steel
NOTE:
In areas likely to be subject to water our optional stainless steel cement box
is available. All our range of patch ttings, pivots, and latches compliment
the oor spring installation
AXF5004
HEAVY DUTY HOLD OPEN FLOOR SPRING
Ideal for pivot entry doors and storefronts
Maximum door width 1100mm
Maximum door weight 100kgss
DIMS:
Cement Box Size
306mm - Length
108mm - Width
40mm - Height
Adjustment in Cement Box
7mm - Length
10mm - Width
4mm - Height
Cover Available in Satin or Polished 316 Stainless Steel
NOTE:
In areas likely to be subject to water our optional stainless steel cement box
is available. All our range of patch ttings, pivots, and latches compliment
the oor spring installation
TOP PATCH
FITTING
AXF001
20mm Dia glass holes
148
20
37
37
R55
164
BOTTOM PATCH
FITTING
AXF002
148
R55
37
37
20
164
PIVOT
HINGE
AXPF040
218
52
15
106
67
161
20
20
36
36
R80
R55
146
73
20
FRAMLESSS GLASS
CONNECTORS
STANDOFF ASSEMBLY
10mm Cap
1.5mm Plastic
Washer Bush
1.5mm
Washer
50
35
25
M12 Thread
25
125
50
50
9
Standoff Body
10
50
50
30
50
SO-50-50-M12
M12 Thread
38
SO-50-30-M12
25
45
38
SO-38-45-M12
SO-38-25-M12
NOTES
reveal
cap