You are on page 1of 2

NEW

SYLUANIA

Produc't

Irrtormation
Bulletin

Sylvania BriteBeant- I 2OO


PAR 64 Mark II 56OOK

This new Sylvania BriteBeam lamp


for film, theatre and television
applications features a frosted arc
capsule that enhances the lamp's
color consistency across the entire
beam pattern. Moreover, the
special frosted arc capsule eliminates the slow changes that are
normally associated with lamp
aging. The result is a studio lamp
with very predictable output

throughout its life.


Like the original BriteBeam 1200
PAR 64, the new l\4ark ll has an
average rated life ol 1,000 hours.
Total light output remains at
100,000 lumens, with a center

intensity in excess of 1,000,000


beam candlepower.
The highly-efficient BriteBeam
1200 PAR 64 N4ark ll produces 84
lumens per watt, making it about
lour times more efficient than
incandescent or tungsten halogen
light sources. Designed as a daylight-quality fill-light for studio use
and location shots, this new medium
arc length light source has an initial color temperature ol 5600K.
Because of its high lumen output,
fewer lamps are needed to provide
desired illumination levels. Furthermore, Sylvania BriteBeam Iamps

produce significantly less heat than This results in more comlortable


standard incandescent or tungsten working conditions and less need
halogen light sources.
Ior costly studio cooling equipment.

The BriteBeam Mark ll has tour lens systems:


Beam Specilications
Maximum

lntensity

Lens

Very Narrow Spot

VNSP
NSP
MF

Narrow Spot
Medium Flood
Wide Flood

Total Beam

Angle

(500/0)

(Candella)

(VxH)

x
x
4.6 x
1.5 x

80x
90x

1.2
1.0

106
106
105
105

120 x
22o x

110
120
240
580

Technical Information
Ordering Abbreviation

881200/PAR 64 Mark ll

NAED Code
Descriptjon
lnitial Color Temperature
Lumens
Average Rated Hours of Life
Nominal Watts
Operating Voltage
Base
Maximum Diameter
MOL
Arc Length
Reflector Coating
Bulb Type

54763
Daylight fill light source
5600K
'100,000
'1,000 hours

1 ,200
90-115 Vac
G38, Bipost
206mm (8.1")
171mm (6.89")

'13mm (0.52")

Dichroic Coat
PAR 64

Nole: lvlust be used with proper ballast. Contact your Sylvania lamp distributor for more
informalion.

Spectral Energy
Distribution Curves
Sylvania BriteBeam 1200 PAR 64 Mark ll lamps
as compared to daylight and tungsten halogen.
Center Beam lntensity Comparisons
BriteBeam 1200
PAR 64
(Clear capsule)

VERY I{ARROW SPOT

Over time

BriteBeam 1200
PAR 64 Mark ll
(Frosled capsule)

WIDE FLOOD

F
The Syrvanra B eBeam 12o0 PAF 64 Mark rrramF
above spe.ta eieroy dstburor (sED) curue Fo,

cosey appoxmares dayrqhras srrown on the


conpanso. a comparable rungslen halooen

It is important that this warning notice and


operating instructions be caretully read in its
entirety before installing or using this lamp. Any
questions should be directed to the manufacturer's

Correlated Color Temperature Comparisons


Over time

representative.

WABNTNG

BriteBeam 1200
PAR 64

Fire hazard from arc tube rupture:

(Clear capsule)

This Sylvania BriteBeam lamp contains a quartz arc


lube operating at high temperature (1,0000C) and at
high pressure. The arc tube may rupture suddenly
and may shatter the lamp lens creating a risk ol
personal injury and property damage from hot quartz
arc tube particles. Proper precautions must be taken
to protect persons and property in the vicinity of the
lamp.

Ultraviolet radiation exposure:


WARNING: This lamp can cause serious skin burn
and eye inllammation from shortwave ultraviolet
radiation il outer envelope ol the lamp is broken or
punctured. Do not use where people will remain lor
more than a lew minutes unless adequate shielding
or other safety precautions are used.

VERY NARBOW SPOT

BriteBeam 1200
PAR 64 Mark ll
(Frosted capsule)

WIDE FLOOD

o
o

.ooo

Operating instructions:
To avoid electrical shock hazard do not insert or

remove this lamp when power is on. ll the outer


envelope of arc tube is broken, shut off power
immediately and remove lamp alter it has cooled.
Operate this lamp only with compatible auxiliary
equipment. The lixtures and ballast used with this
lamp must be properly grounded and operated at
specilied voltages and lrequencies. Operation ol the
equipment at voltages greater than 1100/0 ol rating
could damage the lamp. Do not obstruct air
circulation around the ballast.

GTE Products Corporatlon


Sylvania L ghtinq Center

Danvers [rassachuseits 01923

SYLUAN'A

lndustria /
Oommercia
L gh1 ng

You might also like