Professional Documents
Culture Documents
Aluminium Partition
Relatively Al partition has lesser impact strength.
Carpentry labour is less.
Anodising and powder coating are the normal finishing options.
Normally panelled types are done.
Brick partition
Disadvantage:
-During extreme weather, it may cause
degradation of the surface due to frost
damage.
-It adds a lot of weight to the
foundation. Therefore it increases the
stress of the foundation which
stronger foundation needed to support
this bricks.
When the brick show some damage it is unable to repair that part only but to
remove the entire wall section which very costly. Plus, material used are largely
related.
- Poorly made bricks such as clinkers and older recycled bricks might be pitted,
irregularly shaped, worn or prone to chipping.
In humid climates, porous brick invites mold. It suffers damage as water and ice
expand and contract in
its pores.
- Brick is not cost-effective for many
home builders.
It can be damaged by vines.
In modern practice, the advent of liquid acrylic additives and other advances to the grout
mixture, create slower moisture absorption over the older formulas, and also increase bonding
strength to mitigate these failures. Restoration steps should include treatment to the steel to arrest
rust, using practices for treating old steel common in auto body repair
Timber partition
Advantages of Timber Frame Construction
Quick erection times
It Reduced site labour
It is Recyclable
Can be built to exceed 60-year design life
Reduced construction time translates into reduced risk exposure
Disadvantage
Transportation and carriage access
Exposure to weather before enclosed
Combustibility of timber requires vigilant
Susceptibility to decay of timber when exposed to excessive moisture