Professional Documents
Culture Documents
Products Available
Chemical Composition
Carbon
Manganese
Sulfur
Silicon
Molybdenum
Chromium
Iron
Aluminum
Titanium
Copper
Cobalt
Boron
Zirconium
Nickel
in forms :
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Plates
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Pipes
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Round Bar
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Tube
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Flanges
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Wire
NIMONIC ALLOY PK33, NICKEL ALLOY PK33, ALLOY PK33 Fittings
ALLOY
PK33
0.07max
0.5max
0.015max
0.5max
5.0-9.0
16.0-20.0
1.0max
1.7-2.5
1.5-3.0
0.2max
12.0-16.0
0.005max
0.06max
Bal
AFNOR NC19
KDu/v
0.07max
0.5max
0.015max
0.5max
5.0-9.0
16.0-20.0
1.0max
1.7-2.5
1.5-3.0
0.2max
12.0-16.0
0.005max
0.06max
Bal
Mechanical Properties
ALLOY
PK33
1127
664
33
41
AFNOR NC19
KDu/v
1127
664
33
41
Annealing
Nimonic PK33 is annealed at 1107C (2025F) and then air cooled.
Cold Working
Standard tooling methods are used for cold working Nimonic PK33.
Usage of plain carbon steels is not recommended as they may produce galling.
Galling can be reduced by the usage of soft die materials and heavy duty lubricants.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
www.aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
Welding
Welding techniques recommended for Nimonic PK33 include gas-tungsten arc welding, gas metal-arc welding, submerged-arc welding and shielded metal-arc welding.
Usage of a matching alloy filler metal is recommended for the welding process and an alloy rich in Ni, Co, Cr, Mo is used during the absence of a matching filler metal.
Forming
Conventional methods are used for forming Nimonic PK33 that has good ductility.
Heavy-duty lubricants can be used for forming Nimonic PK33.
Powerful equipment is recommended for forming this alloy as it is stronger than the commonly available steels.
Machinability
Nimonic PK33 is machined by conventional machining methods.
This alloy has higher levels of gunniness and strength and is work-hardened during the machining process.
Tooling and usage of a heavy duty machining equipment during the machining process minimize work-hardening or chatter of this alloy before the cutting process.
Heavy lubricants are suitable for boring, tapping, drilling or broaching, and coolants that are water-based are recommended for high- speed operations like milling, grinding or turning.
Heat Treatment
Nimonic PK33 is solution annealed at 1327C (2025F) and then cooled.
This is followed by heat treating the alloy under 849C (1560F) for 4 hours and finally cooling the alloy in air.
Hardening
Nimonic PK33 can be hardened by thermal treatment or cold working.
Applications
Nimonic PK33 can be used at elevated temperatures in applications like enclosures for furnace hot sections used in industries or gas turbine hot sections.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
www.aesteiron.com