You are on page 1of 2

Conduct site inspection and ensure all electrical installation must comply with the design specifications,

as per drawings and as per applicable standard.


Coordinate and prepare various documents such as test, inspection reports, excavation permits, safety
approval prior to implementation of work.
To assist and coordinate with the sub-contractor, Supervisor staff to plan co-ordination and control work
activities in accordance with approved drawing work method / inspection & specification requirement etc.,
Verification of Inspection Readiness before issuing RFI
Keeping the files/Inspection Records always updated
Highlighting all discrepancies/anomaly detected during monitoring inspection and informing the same to
QC Manager.
Initiate NCR as required in consultation with QC Manager.
Follow up of corrective and preventive action for NCRs/CARs issued and verification of
effectiveness of the same.
Taking immediate remedial to clear inspection log book comments
Submitting daily report to QC-Manager at the end of each day of work.
Sole responsible for all Quality Control Activities for the allotted area of discipline.
Verification of materials supplied with that of material submittal
Verification of proper functioning & utilization of measuring instruments.
Supervise the work under as per specifications and standards.
Study and analyze the design / sketch plan which include the materials breakdown given by the client
for execution of the project.
Review Design and development of one line diagram, preparation of electrical equipment specifications,
identifying hazardous areas,
Supervise group of engineer and draftsmen for the underground tunnel construction project.
Review and updates engineering estimating data, costing parameter and drafting standard.
Assist in the preparation of work plans, schedules, budgets, manning requirements and progress
reporting.
Prepare cost and material estimates.
Review and comments on engineering drawings, documents and reports.
Conduct field investigation and dimensional checking.
Operation and maintenance of grid station, Transformers, protection relays, timers, Switch Gears, Panel
Boards, Circuit Breakers, HT & LT transmission lines and electrical equipment, Electrical motors A/C & D/C,
Industrial trouble shooting & wiring
Cable High Potential Test / Insulation Resistance Check/ Continuity Check
Loop Checking, Commissioning & Trouble Shooting
Maintenance works in turbines, electrical motors and accessories.
Modification of the Panel Internal Wiring Connections as per site requirements.
Trouble shooting and maintenance of electrical connections, accessories and installations / equipments.
Internal wiring of Panels.
Participated in the Energy Activities of Sub-stations.
Charging & Discharging Test; Cable Termination.
Placing of Cathodic Protection throughout the plant that includes Inlet facilities,
Data tracking Systems.
Review design and specification related to the project to conform to original client specification.
Perform design modification / revision of wiring of feeders, motors controllers, medium and low voltage
wiring and protection circuit.
Supervise medium and low voltage installation, termination, splicing and jointing and testing of
underground cable system
Assist in start-up, testing and commissioning of the systems.
Supervise operation and maintenance, corrective and preventive maintenance program of the project
during warranty period.
Check and prepare all electrical/instrument drawings its apparatus and materials, detail drawings prior
to work implementation.
Responsible for the installation of electrical/instrument cable trays, field instruments, analog and digital
junction boxes. Panel boards, switchgears, transformers, lighting fixtures, bus duct and its accessories.
Megger testing, line checking. Earth testing, phase sequence, resistance and voltage level testing of
cables for motors.
Prepare progress report of cables pulled daily and submit to all concerned parties such as the client
representatives or the project management.
Check and balance electrical and instrument cables through cable reel management see to it that actual
length of installed cables are adhere on estimated length.
Installation of Electrical & Instrumentation equipment, Panel, Ups System, Welding Socket, Valve Pit

Pump, Power Air Conditioning & Power DB, Air Compressor with Air Tank
Installation & testing of earthing system laying Copper conductor, Grid making and fixing of earthing
dispatcher
Lying of Power, Control & Signal Cable U.G. and A.G. cable, jointing, trench excavation, lugs & cable
gland fixing & termination of cable gland
Fabrication of Steel and Installation of Cable tray
Industrial & Residential Wiring complete with all Accessories of various type of Lighting Fixture,
Distribution Box Designing & Loop cheeks
Installation of Lighting Pole complete with JB and Gearbox fixing, Lighting DB
Estimation of Installation Item & Site Planning for execution of Jobs & Cross checking of jobs of regular
interval of time
To making arrangement of material and ensure that material reaches the Site timely
To handle the job under safety and precaution
Ensuring Design and development process is done according to quality standards
Site Supervision & Implementation of jobs as per drawing & specification of the Projects
Resolving field problems and connection with Clients and Supervise Electrical Crew
Handling the job under safety precaution
Close co-ordination with the concerned Department and Senior Authority
Daily progress states reporting
Maintain quality of work and control wastage of materials of site
WORKING EXPERIENCE:
Company : M/s. Al-Khodari
Project : Upgrade Wastewater System / Central Region Bulk Plant
Position : QA/QC Electrical Inspector
Duration : Feb. 2008 to till date
Company : Oman Maintenance & Construction
Contractor : Occidental Mukhaizna LLC (PDO Contractor)
Position : QA/QC Electrical Inspector
Duration : May 2007 to Nov. 2007
Company : Singapore UTAG Eng. Pvt. Ltd.
Position : QA/QC Electrical Inspector
Duration : May 2003 to Jan. 2007
Company : Oman U.E.P. (PDO Nimr)
Position : QC Electrical Inspector
Duration : June 2001 to Mar. 2003
Company : IBN Zahr, KSA.
Position : Electrical Supervisor
Duration : Mar. 1996 to Dec. 2000
Company : Thirumalai Chemicals Ltd.
Position : Electrical Supervisor
Duration : May 1994 to Jan. 1996

You might also like