Professional Documents
Culture Documents
2 VALVE MANIFOLD
Easy to handle valve. A valve that is designed for many years service in different working conditions with limited
or no maintenance at all. A valve in which the functional threading is not in contact with the fluid so as to avoid
possible corrosion and thereby ensuring smoother operation after a long operational service. A valve that will be
safe in every working condition and that will always prevent, even in case of incorrect handling, the stem being
ejected under pressure with consequent possibility of accidents. A valve which, with time, preserves the same
moment of tightness of its organs even under vibration. A valve whose plug is free to rotate about the stem and
move only vertically, to prevent indents, wear and breakages of the seat and of the plug itself. The material being
used to make the needle will be change depends on the material of the manifold.
9
2
VIMEC
LOCKING DEVICE
6
5
4
8
ANTI TAMPER
2 VALVE MANIFOLD
No.
DESCRIPTION
1
2
HANDLE
PACKING GLAND
3
4
5
6
7
8
9
JAM NUT
STEM
PACKING
BONNET
BUSHING
NEEDLE
DUST CAP
MATERIAL
AISI 304
AISI 316
AISI 303
AISI 316
P.T.F.E.\GRAPHOIL
AISI 316
AISI 316
AISI 36
PLASTIC
HANDLE
PACKING
GLAND
JAM NUT
To ensure the continuity of the moment of tightness in the most severe vibratory
conditions, limiting the maintenance operations.
STEM
Staging on its body that have purpose on each of it. It also use to hold the needle
and this stem is the main part of this valve because it attach with all of other part
in order to make it function.
PACKING
Act as a gripper to the ring packing and it will force the ring to compact it with
lower bush so it avoid fluid from leak.
BONNET
In this case the functional threading is not in contact with the process fluid and
this prevents corrosion phenomena ensuring smooth working even after a long
period of service.
BUSHING
Guarantees maximum tightness in the most severe conditions and according with
the most modern safety specifications.
NEEDLE
Used as a holder for ring packing and bushing area. It grips the ring, bushing and
stem together.
DUST CAP
Prevent dust from interfere at the stem and the jam nut to ensure smooth surface
for the stem.
2 VALVE MANIFOLD
2 VALVE MANIFOLD
These manual valves have been designed general purpose uses in wide range of applications, are suitable for instruments and lines cut-off on steam and high pressure fluids. These
valves are ideal for general purpose as well as for critical applications where high resistance
to pressure, temperature and corrosion are of primary importance and when tight shut-off,
time performance and long lasting equipment are required. Valve bodies are manufactured
with different materials in order to allow choosing the one better suited for welding on
stainless steel, alloy steel or pipes. Before shipment all valves are tested in our laboratory.
Upon request we can supply test certificates as well as chemical analysis and physical characteristics certificated of the material used.
2 VALVE MANIFOLD
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
2 VALVE MANIFOLD
2 VALVE MANIFOLD
They have been conceived to make installation and maintenance of manometers, pressures, transmitters, pressure indicators and recorders easier, faster more economic and less cumbersome. They conceived in one-piece body which houses
the line interception and instrument zeroing valves, thus allowing the elimination of nipples and pipe fittings hence the
possibility of leaks. The drain or vent connection has standard 1/4 NPT-F thread in order to allow possible connection
with a collector conduit but sometimes the drain or vent connection size will be change upon request. It has been made
from bar-stock type or forged type.
VMC 202
open 165
VIMEC
115
VIMEC
66
50
D
35
I
VMC 203
32
OPEN 165
VIMEC
115
VIMEC
66
35
O
D
32
Outlet 1/2"NPT-F
2 VALVE MANIFOLD
VMC 206
Uscita/Outlet 1/2"NPT/F
VIMEC
VIMEC
VIMEC
VIMEC
45
O
60
OPEN 65
OPEN 65
VMC 274
N 2 8 HOLES
1/2"NPT-F INLET
50
OPEN 100
VIMEC
VIMEC
1/4"NPT-F DRAIN
1/2"NPT-F OUTLET
30
100
32
100
VMC 210
1/2"NPT-F OUTLET
VIMEC
VIMEC
OPEN 120.
VIMEC
40
INLET 1/2" NPT-F
70
30
OPEN 95.
2 VALVE MANIFOLD
VMC 216
N2 FIXING HOLES 8
VIMEC
VIMEC
1/2"NPT-F OUTLET
OPEN 135
VIMEC
60
70
1/2"NPT-INLET
1/4"NPT-FDRAIN
70
30
VMC 241
VIM
V I ME C
EC
Open 125
Drain 1/4"NPT/F
VIMEC
70
Inlet 1/2"NPT/F
Outlet 1/2"NPT/F
60
65
30
Open 65
2 VALVE MANIFOLD
VMC 290
O
D
I
VIMEC
VIMEC
OPEN 135
VIMEC
1/2"NPT-F OUTLET
1/2"NPT-F INLET
70
30
70
1/2"NPT-F DRAIN
OPEN 95.
VMC 208
OPEN 200
VIMEC
VIMEC
70
65
N2 mounting holes 12
VIMEC
30
VIMEC
Flanged outlet
2 VALVE MANIFOLD
VMC 218
INLET 1/2" NPT-F
VIME
V I ME C
VIMEC
FLANGED OUTLET
FLANGED OUTLET
DIN 19213
OPEN 133.
65
40
35
35
12
M8 FIXING HOLES
1/4"NPT-F DRAIN
29
30
70
VMC 226
OPEN 190
FLANGED INLET
V I ME
EC
VIME
VIM
40
17
30
FLANGED OUTLET
V I ME C
V I ME C
65
N2 FIXING HOLES 12
VIMEC
80
1/4"NPT-F DRAIN
I
T-F
2" NP
10
/
Inlet 1
0 - No treatment/Polished
1 - Galvanization
VIM
EC
NG
NG RI
I
L
A
E
WO S
BONNET (TRIM)
CONNECTIONS
.
S 12
E
L
O
4H
C
M -ENPT
V I FN
V I ME
1 - Standard
2 - Locking device
3 - Anti-tamper
4 - Panel Mounting
DN - Flanged to NPT
FG - BSPP
SW - Socket weld
VIMEC
MATERIAL
05 - Carbon steel
11 - AISI 316L
06 - Monel 400
117
26 - Hastelloy
C.276
40 - Duplex F.51
57 - Inconel4 625
5
59 - Duplex F.53
70
PACKING
1 - P.T.F.E.
2 - Graphoil
RATING
6 - 6.000 PSI
1 - 10.000 PSI
NEEDLE
-F
" NPT 1 - Valve body material
1/4
Drain
30
M8
OLES
2 - F6
9 - F6 + Stellite
B - Delrin (Soft Seat)
76
145
11
VIMEC S.r.l.
Via Lambro, 62 - OPERA (Milano) - ITALY
Tel. +39.02.576.022.97 - +39.02.576.038.99 - Fax +39.02.576.004.09
web site: WWW.VIMEC-VALVES.COM - E-mail: VIMEC@POINTEST.COM