Professional Documents
Culture Documents
Pro|Engineer
Assembly
Dr Ho Jee Hou
BB40a
JeeHou.Ho@nottingham.edu.my
Acknowledgement:
Dr Michael Johnston, Associate Professor, University of Nottingham, UK.
Dr Kay Bond, Lecturer (Visiting), University of Nottingham, UK.
Department of M3
MM1DM1 Design and Manufacture 1
project_1
assembly
part.2
part.1
part.3
project_2
assembly
part.2
part.1
part.3
Department of M3
MM1DM1 Design and Manufacture 1
Department of M3
MM1DM1 Design and Manufacture 1
Assemble - placement
Indicates a component being placed in an
assembly; the icon
is displayed in the Insert
> Component > Assemble menu and the feature
toolbar
Department of M3
MM1DM1 Design and Manufacture 1
Placement panel
Enables and displays component placement and
connection definition
It contains two areas:
(1) sets and
(2) constraints
Department of M3
MM1DM1 Design and Manufacture 1
Move panel
Use the Move panel to move the component being
assembled for easier access
Department of M3
MM1DM1 Design and Manufacture 1
Motion type
Department of M3
MM1DM1 Design and Manufacture 1
Constraint type
Mate - positions two references of the same
type so that they face each other
Align - positions two references of the same
type so that they face in the same direction, two
points coincident or two axes coaxial
Insert a revolved component surface into an
assembly revolved surface
Aligns the components coordinate system
with an assembly coordinate system
Point of contact is a tangent
Positions a point on a line
Positions a point on a surface
Positions an edge on a surface
Fixes the current location of a component
Aligns the component coordinate system with
the default assembly coordinate system
Department of M3
MM1DM1 Design and Manufacture 1
Department of M3
Department of M3
MM1DM1 Design and Manufacture 1
Department of M3
MM1DM1 Design and Manufacture 1
Offset type
Specifies the offset type for Mate or Align
Offsets the component reference from the
assembly reference by the value specified
Makes component reference oriented on the
same plane and parallel to the assembly
reference
Makes component reference
and assembly references
coincident to each other
Offsets the component
reference from the assembly
reference by the angle value
specified