Professional Documents
Culture Documents
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the products serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 VOLT CORDLESS
IMPACT
DRIVER
REV 14h
Table of Contents
SAFETY
Safety.......................................................... 2
Maintenance............................................... 10
Specifications.............................................. 7
Setup........................................................... 7
Operation..................................................... 8
SETUP
OPERATION
Electrical safety
Do not expose power tools to rain or wetconditions.
Water entering a power tool will increase the risk of electric shock.
Page 2
Item 68853
SETUP
SAFETY
Personal safety
Item 68853
MAINTENANCE
OPERATION
Page 3
SAFETY
SETUP
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
OPERATION
MAINTENANCE
Page 4
Item 68853
SAFETY
treatedlumber
Your risk from these exposures varies, depending
on how often you do this type ofwork. Toreduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopicparticles.
(CaliforniaHealth & SafetyCode 25249.5, etseq.)
SETUP
Vibration Safety
MAINTENANCE
Item 68853
OPERATION
Page 5
Grounding
SAFETY
SETUP
Extension Cords
Note: Extension cords must not be used with this items Charger.
Symbology
OPERATION
Double Insulated
VAC
A
MAINTENANCE
Page 6
Item 68853
Specifications
Battery Type
Impacts
Max. Torque
1050 in-lb
SAFETY
Charger
SETUP
Note: For additional information regarding the parts listed in the followingpages,
refer to PartsList and Diagram on page11.
Functions
Collar (11-1)
Anvil (2)
Work Light
Direction
Switch
OPERATION
Trigger (4)
Bit
Groove
Battery Button
MAINTENANCE
Battery
Pack
Red
LED
Item 68853
Charger
Page 7
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
SAFETY
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTALOPERATION:
Release the Trigger and remove the Battery Pack before adjusting tool or installing accessories.
WARNING! Donot install the Battery Pack
until AFTER you complete the following
steps to set up the tool for use.
SETUP
OPERATION
Charging
1. Place the Battery Pack on a dry fireproof surface in
a room where the temperature is from 50104 F.
Note: If recharging a newly spent Battery Pack,
allow it to cool completely before charging.
2. Examine the Battery Pack. It must be
undamaged, and a NiCd type BatteryPack.
Donotchargeacracked, open, or
leaking Battery Pack, or charge a
nonrecommended type of Battery Pack.
MAINTENANCE
Page 8
Item 68853
SAFETY
SETUP
MAINTENANCE
OPERATION
Item 68853
Page 9
SAFETY
TO PREVENT SERIOUS INJURY FROM ACCIDENTALOPERATION: Turn the Power Switch of the tool off
and remove its Battery Pack before performing any inspection, maintenance, or cleaningprocedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.
Ifabnormalnoise or vibration occurs, have the problem corrected before further use.
SETUP
Troubleshooting
Problem
Tool will
not start.
Possible Causes
Likely Solutions
OPERATION
MAINTENANCE
Page 10
Item 68853
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTSTHERETO.
Description
Qty.
Rotor
Anvil
Housing
Trigger
Push Rod
Screw
Light Frame (7-1, 7-2, 7-3)
Light
Circuit Board
Resistor
Sleeve Housing
Sleeve Grip
Part
1
1
1
1
1
13
1
1
1
1
1
1
10
11
11-1
11-2
11-3
11-4
11-5
12
13
14
15
16
Description
Qty.
Shaft Sleeve
Quick Lock (11-1 thru 11-5)
Collar
Steel Ball
Spring
Washer
Clamp Spring
Washer
Gasket
Top Pin
Spring
Battery Pack
1
1
1
1
1
1
1
1
1
1
1
1
3
4
7-1 7-2
7-3
10
11-1
11-2 11-3
SETUP
1
2
3
4
5
6
7
7-1
7-2
7-3
8
9
OPERATION
Part
SAFETY
12 13
14
15
MAINTENANCE
11-4 11-5
16
Page 11