Professional Documents
Culture Documents
01
02
03
04
05
To understand the behaviour and characteristics of lightning surge stroke on electric traction system.
To improve the reliability of electrified railway operation against lightning overvoltage
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
08.12.2016
Supervisor
Gayadhar Panda
Gayadhar Panda
Atanu Banerjee
Atanu Banerjee
Supriyo Das
Supriyo Das
Mousam Ghosh
Simulated and/or experimentally estimated speed of PMDC brushed motor may be realized.
Mousam Ghosh
Torque angle will be analyzed with different speed and load torque.
According to the control strategy it should be constant at different operating point.
Rakesh Roy
Rakesh Roy
Development of novel and realistic control algorithm for Mobile V2G participating in LFC.
Sanjoy Debbarma
Design and Control of VSP-HVDC Links for Power System in presence of Distributed Energy Resources.
Improvement of power system dynamics by contributing virtual inertia through VSP-HVDC Links.
Sanjoy Debbarma
Modeling of Electric Spring for Non Critical Load in Smart Power System and Its Impacts.
Modeling of Electric Spring for Non Critical Load in Smart Power System and Its Impacts.
Sanjoy Debbarma
On performing the project a model of a system as given black box would be estimated.
The controller design based on the estimated model is supposed to be accomplished
Biswajit Halder
Biswajit Halder
Biswajit Kar
Biswajit Kar
Biswajit Kar
Biswajit Kar
Shaik Affijulla
The time response of an open loop servo mechanism supposed to be analyzed and
An approximate model of the open loop servomechanism is to be determined.
Once the model is validated a suitable discrete time controller to be designed
Implemented in software and/ or hardware environment.
An observer designs to be accomplished using a motor model
Different type of observer (taking linear as well as nonlinear model) performance is supposed to be compared.
The project may involve both software and hardware design and implementations.
Design inverter for solar power to feed anti harmonics in the grid
Condition monitoring and control of power system equipment using IR camera
ECG Signal analysis for medical application
Signature verification for cashless transaction in online purchase
Page 2 of 2
Detection of Grid Islanding and Power Quality Disturbances in Multi-Bus
Power System with Renewable Energy Integration
23
24
25
26
27
Shaik Affijulla
Chaos based secure communication system by using nonlinear and robust control may improve the
communication security and data encryption while information processing.
Further, chaos based secure communication systems can be used in the complex dynamical networks like
www (World Wide Web), cellular of mobile network, smart grid, etc.
Piyush P Singh
Damage the power equipment, shrink the region of stability, result in angle instability in the power system
may be improved.
Voltage collapse which is even end up with a catastrophic blackout may be avoided the control method to
suppress chaotic oscillation in a power system.
Piyush P Singh
The proposed scheme will be outperformed some of the existing techniques based on overall achievement;
high accuracy, range, SNR tolerance, susceptibility, reduce complexity.
NOTE
Scope and Expected Outcome:
Doppler Effect is the change in frequency or wavelength of a wave for an observer moving relative to its source. It was first proposed by Austrian physicist Christian Doppler in 1842. Later on, first non-contact type vibration measurement based on Doppler effect was proposed by Howard C. Hardy in 1956. Since then, Doppler effect has been
employing in many of the non-contact type vibration applications such as detecting and characterizing the particle size in the fluid, proximity, fracture of solid materials, analyzing of robotic movement, motor speed, heart wall vibration, blood velocity, bone fracture, tissue muscle etc. In non-contact type vibration measurement, high frequency
carrier signal is used as to sense the vibrating body. Then, the Doppler phase shift occurred in carrier signal contains the information of vibrating object. Therefore, it is first and foremost to extract the Doppler signal from the carrier signal.
A synchronizing technique will be proposed based on frequency-locked loop (FLL) to extract Doppler signal. From the extracted Doppler signal, vibration parameters such as amplitude, frequency and phase can be estimated. The frequency-locked loop (FLL) scheme will be analyzed based on the different parameters for certain applications.
Software and hardware implementation:
The scheme will require MATLAB/Simulink with DSP builder tools as a design platform. Quartus II software will convert the Simulink design into VHDL code that will program the FPGA chip. Processing and experimental validation requires high speed DSP processor such as Atera Stratix series FPGA board. But, in the case of these hardware
limitations, most of the work will be carried out in MATLAB/Simulink platform.
Guidelines to Students
1. Minor project title must be selected from the proposed list.
2. Students will approach the faculties based on their selected topic/supervisor along with Minor Project Proposal (MPP) form.
3. The MPP form is available at Minor Project Coordinators. Please collect on/before 12.12.2016.
4. After discussion with the faculty on selected topic, a student will submit the Minor Project Proposal (MPP) form within due date 14.12.2015 (12:00 Noon) without fail which consists the selected topic of minor project
along with supervisor(s) signature.
5. For any associated clarifications, please contact the minor project coordinators before due date of MPP form submission.
Sd/-
Sd/
Project Coordinators
Head of Department