Professional Documents
Culture Documents
STANDBY
880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts
Caterpillar is leading the power generation
marketplace with Power Solutions engineered
to deliver unmatched flexibility, expandability,
reliability, and cost-effectiveness.
Image shown may not
reflect actual package.
FEATURES
FUEL/EMISSIONS STRATEGY
Low fuel consumption
DESIGN CRITERIA
The generator set accepts rated load in one step
FULL RANGE OF ATTACHMENTS
Wide range of bolt-on system expansion
attachments, factory designed and tested
WORLDWIDE PRODUCT SUPPORT
Worldwide parts availability through the
Caterpillar dealer network
With over 1844 dealer branch stores operating in
200 countries, you're never far from the
Caterpillar part you need
99.7% of parts orders filled within 24 hours. The
best product support record in the industry.
Caterpillar dealers service technicians are trained
to service every aspect of your electric power
generation system
Preventative maintenance agreements
The Cat SOS program effectively detects internal
engine component condition, even the presence
of unwanted fluids and combustion by products
Exhaust
Fuel
Generators
Power Termination
Standard
Single element canister type air cleaner
Service indicator
Radiator with guard (43C)
Low profile (frontal area)
Low airflow
Coolant drain line with valve
Fan and belt guards
Caterpillar Extended Life Coolant
Coolant level sensors
Radiator duct flange
Dry exhaust manifold
Flanged faced outlets
Primary fuel filter with water separator
Secondary fuel filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Permanent magnet excited
Class H insulation
Class F temperature (105C prime/130C standby)
Winding temperature detectors (select models)
Anti-condensation space heaters
Bus bar (NEMA and IEC mechanical lug holes) -right
side standard
Bottom cable entry
Governor
ADEM A4
Control Panels
Lube
Mounting
Starting/Charging
General
Right-hand service
Paint - Caterpillar Yellow (except rails and radiators
gloss black)
SAE standard rotation
Flywheel and Flywheel housing - SAE No. 0
Optional
Dual element air cleaners
Air inlet adapters
Radiator with 27C ambient capability
Jacket water heater
14 March 2006
6:11 AM
SPECIFICATIONS
CAT GENERATOR
SR4B Generator
Frame size......................................................................... 693
Excitation................................................ Permanent Magnet
Pitch.............................................................................. 0.7222
Number of poles...................................................................4
Number of bearings......................................................... 002
Insulation....................... UL 1446 Recognized Class H with
tropicalization and antiabrasion
IP rating..........................................................Drip Proof IP22
Alignment....................................................... Close Coupled
Overspeed capability - % of rated................................... 180
Wave form....................................................................003.00
Voltage regulator.3 Phase sensing with selectible volts/Hz
Voltage regulation............Less than +/- 1/2% (steady state)
Less than +/- 1% (no load to full load)
Telephone Influence Factor.............................. Less than 50
Harmonic distortion......................................... Less than 5%
14 March 2006
6:11 AM
TECHNICAL DATA
Open Generator Set - - 1500 rpm/50 Hz/400 Volts
Package Performance
Genset Power rating @ 0.8 pf
Genset Power rating with fan
Low Fuel Consumption
DM8146
1100 kVA
880 ekW
Coolant to aftercooler
Coolant to aftercooler temp max
Fuel Consumption
100% load with fan
75% load with fan
50% load with fan
Cooling System1
Ambient air temperature
Air flow restriction (system)
Air flow (max @ rated speed for radiator arrangement)
Engine coolant capacity
Radiator coolant capacity
Engine Coolant capacity with radiator/exp. tank
Inlet Air
Combustion air inlet flow rate
Exhaust System
Exhaust stack gas temperature
Exhaust gas flow rate
Exhaust flange size (internal diameter)
Exhaust system backpressure (maximum allowable)
Heat Rejection
Heat rejection to coolant (total)
Heat rejection to exhaust (total)
Heat rejection to aftercooler
Heat rejection to atmosphere from engine
Heat rejection to atmosphere from generator
Alternator2
Motor starting capability @ 30% voltage dip
Frame
Temperature Rise
Lube System
Sump refill with filter
49 C
120 F
230.7 L/hr
177.2 L/hr
125.6 L/hr
60.9 Gal/hr
46.8 Gal/hr
33.2 Gal/hr
56 C
0.12 kPa
1210 m/min
55.0 L
13.5 L
68.5 L
133 F
0.48 in. water
42731 cfm
14.5 gal
3.6 gal
18.1 gal
63.5 m/min
2242.5 cfm
520.8 C
178.8 m/min
203 mm
10.0 kPa
969.4 F
6314.3 cfm
8 in
40.2 in. water
335 kW
939 kW
162 kW
53 kW
47.3 kW
19051 Btu/min
53401 Btu/min
9213 Btu/min
3014 Btu/min
2689.9 Btu/min
1982 skVA
693
130 C
266 F
68.0 L
18.0 gal
Emissions (Nominal)3
NOx g/hp-hr
6.12 g/hp-hr
CO g/hp-hr
.43 g/hp-hr
HC g/hp-hr
.01 g/hp-hr
PM g/hp-hr
.019 g/hp-hr
1
Ambient capability at 300m (984 ft) above sea level. For ambient capability at other altitudes, consult your Caterpillar dealer.
2
UL 2200 Listed packages may have oversized generators with a different temperature rise and motor starting characteristics. Generator
temperature rise is based on a 40C ambient per NEMA MG1-32.
3
Emissions data measurements are consistent with those described in EPA CFR 40 Part 89, Subpart D & E and ISO8178-1 for measuring
HC, CO, PM, NOx. This engine's exhaust emissions are in compliance with the US EPA and California nonroad regulations as identified
above. Data shown is based on steady state operating conditions of 77F, 28.42 in HG and number 2 diesel fuel with 35 API and LHV of
18,390 btu/lb. The nominal emissions data shown is subject to instrumentation, measurement, facility and engine to engine variations.
14 March 2006
6:11 AM
14 March 2006
6:11 AM
DIMENSIONS
Package Dimensions
Length
Width
Height
Weight
4766.9 mm
2024.3 mm
2254.0 mm
8256 kg
187.67 in
79.7 in
88.74 in
18,201 lb
CONTACT INFORMATION
www.CAT-ElectricPower.com
2006 Caterpillar
All rights reserved.
6286500
6