Professional Documents
Culture Documents
B.
C.
D.
C. 30 days
A
17.50 Mpa
D. 60 days
.
B
20 Mpa
.
C
15 Mpa
The minimum nominal diameter of
.
D
bolted to foundation wall in zone 2
25 Mpa
.
305.60)
A.
B.
C.
D.
10mm
12mm
16mm
20mm
1.0 10%
B.
2.50 25%
C.
2.00 20%
D.
1.50
When grillage footings of structural steel shapes are used on soils, they shall be
completely embedded in concrete. Concrete cover shall be at least _____mm on the
bottom. (NSCP 305.8)
A.
B.
C.
D.
100 mm
200 mm
150 mm
250 mm
50%
25%
15%
20%
The lateral force on a crane runway beam with electrically powered trolleys shall be
calculated as ______% of the sum of the rated capacity of the crane and the weight of the
hoist and trolley.
(NSCP 206.9.4)
A.
B.
C.
D.
20%
15%
30%
50%
30 Mpa
A. B.
Essential facilities
15 Mpa
B. C.
Hazardous facility
10 Mpa
C. D.
Standard
occupancy
Retaining
walls shall
be
D. 5 Mpa
designed to resist
sliding by at least
_______times the
lateral force. (NSCP
100 Kpa
206.6) A.
A
3.00
.
B
2.00
.
C
1.50
.
D1.00
.
50 Kpa
B.
150 Kpa
C.
The minimum
200 Kpa
D.
A. 300 mm
250
mm
B.
C. 350 mm
D. 400 mm
outside diameter of pipe piles when used must be? (NSCP 307.6.3)
Individual pile caps and caissons of every structure subjected to seismic forces
shall be interconnected by ties. Such ties shall be capable of resisting in tension
or compression a minimum horizontal force equal to _____% of the largest
column vertical load. (NSCP 306.20)
A.
B.
C.
D.
15%
20%
10%
25%
Miscellaneous occupancy
Essential facilities
Special occupancy
Hazardous facility
The minimum distance that the toe of fill slope made to the site boundary line: (NSCP
302.4.3)
A.
B.
C.
D.
0.80 M
0.60 M
1.50 M
2.00 M
The minimum nominal diameter of steel bolts when wood plates or sill shall be bolted
to foundation wall in zone 4 seismic area in the Philippines. (NSCP 305.60)
A.
B.
10mm
12mm
The maximum
spacing of ties
and spirals in a
driven
pre-cast
16mm
C.
20mm pile
D.
concrete
center to
. In using sand backfill in the annular space around column not embedded in poured
center. (NSCP
footings, the sand shall be thoroughly compacted by tamping in layers not more than
307.5.1)
A_____mm in depth? (NSCP 305.7.3)
75 mm
500 mm
. A.
400 mm
B.
B
100 mm
200 mm
. C.
300 mm
D.
C
125 mm
.
D150
Themmmax. distance
. A.
0.80 M
that the toe of fill slope made to the site boundary: (NSCP 302.4.3)
0.60 Minto soft ground may be considered fixed and laterally supported at
B.Such piles
6.00
M
C._____M
below
the ground surface. (NSCP 306.20)
D.A. 1.50 M1.00 M
B. 2.00 M
C. 2.50 M
The
allowable deflection for any structural member loaded with dead load and live
D. 3.00 M
L/240
L/300
L/360
L/200
10 times
20 times
30 times
15 times
Buildings used for college or adult education with a capacity of 500 or more
students fall to what type of occupancy
A.
B.
C.
D.
Miscellaneous occupancy
Essential facilities
Special occupancy
Hazardous facility
20 Mpa
15 Mpa
25 Mpa
35 Mpa
Fill slopes shall not be constructed on natural slopes steeper than ____% slope (NSCP
302.3.1)
A.
50%
B.
C.
D.
10%
20%
60%
Such piles into firm ground may be considered fixed and laterally supported at
_____M below the ground surface. (NSCP 306.20)
A.
B.
C.
D.
1.50 M
2.00 M
2.50 M
3.00 M