Professional Documents
Culture Documents
AGUILA
Foreman Pipe Fitter
Brgy. Ilijan, Batangas City, Philippines
Passport No. EB0791881
Contact No. +639495706647 / +639287301765
Email address: cirilo.aguila@yahoo.com
OBJECTIVE:
To secure a challenging position in the company that allows me to contribute the
knowledge that I have learned from experience. I am also looking to a company that
provides development of my professional abilities and personal life.
Position Desired: Piping Foreman
WORK EXPERIENCE:
Company
:
KENTZ (MEPC) Malaysia Sdn. Bhd.
Position :
Foreman (Piping / Plumbing)
Duration :
May 2011 up to present
Client
:
Chicago Bridge and Iron (CBI) CLOUGH JV
Project :
PNG-LNG EPC 4 HGCP & HIDES WELL PADS
Papua New Guinea Highlands Upstream Project
Value
:
USD 2 Billion
Job description:
Manage workforce and oversee the works in order to ensure the Project
Safety, Environmental, Quality and Program objectives are satisfied.
WORK EXPERIENCE:
Company
:
Hyundai Engineering & Construction Co. Ltd.
Position :
Foreman (Piping)
Duration :
September 2006 to June 2010
Project :
Berth 31, 32, 34, and 35 (KSOP) Kuwait Shuaiba Oil Pier
Shuaiba North Co-Generation Power / Distillation Plant Project
Job description:
Checking drawings and quantities and ensuring that the calculations are accurate
for the works.
Monitor materials on site in order to ensure that all materials to be used are
approved, and work activities are in conformance to approved plans, specifications, and
method statements.
Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting
torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according to
specifications, by welding, brazing, cementing, soldering, and threading joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using
brackets, clamps, tools or welding equipment.
Lay out full scale drawings of pipe systems, supports, and related equipment,
following blueprints.
Manage punch list clearing, perform hydro and pneumatic testing and
reinstatement work including gravity flow testing.
WORK EXPERIENCE:
Company
Position :
Duration :
Project :
Company)
:
Gamma Al-Moushegah Arabia Ltd.
Pipe Fitter
March 2004 to April 2006
Qatif Facilities at Berri Gas Plant Project (Saudi Aramco, Jubail)
Shoaiba Power Plant Project (West Region, Shoaiba, Saudi Arabia, Electric
Rehabilitation of Water Desalination Plant (SWCC, Jeddah)
Job description:
Ensure correct usage of PPE required on site for safety daily routine.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Checking drawings and quantities and ensuring that the calculations are accurate
for the works.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting
torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according to
specifications, by welding, brazing, cementing, soldering, and threading joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using
brackets, clamps, tools or welding equipment.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Lay out full scale drawings of pipe systems, supports, and related equipment,
following blueprints.
Punch list clearing, perform hydro and pneumatic testing and reinstatement work
including gravity flow testing.
WORK EXPERIENCE:
Company
:
Plant Engineering & Construction PTE, Ltd.
Position :
Pipe Fitter / Fabricator
Duration :
June 2001 to April 2003
Project :
Serraya 1 Chemicals: Shutdown and Rehabilitation
Serraya 2 Chemicals: Fabrication and Erection
(OSP) Organic Synthesis Plant Pfizer Asia Pacific PCFC Fabrication, Erection,
Punch List, Hydro and Pneumatic Testing Reinstatement.
Petrochemical Plant of Singapore (PCS); Shutdown and Rehabilitation
Soxal Gas; Shutdown and Rehabilitation
UMCI Electronics (Protocol); Instrument Air Line Fabrication and Installation
Glaxo Smith Klein (GSK); Fabrication and Installation of Piping
Singapore Refining Company (SFC); Shutdown and Rehabilitation
Singapore Chemical Plant (SCP); Shutdown and Rehabilitation
Job description:
Ensure correct usage of PPE required on site for safety daily routine.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Checking drawings and quantities and ensuring that the calculations are accurate
for the works.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting
torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according to
specifications, by welding, brazing, cementing, soldering, and threading joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using
brackets, clamps, tools or welding equipment.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Measure and mark pipes for cutting and threading.
Lay out full scale drawings of pipe systems, supports, and related equipment,
following blueprints.
Punchlist clearing, perform hydro and pneumatic testing and reinstatement work
including gravity flow testing.
WORK EXPERIENCE:
Company
:
Deutsche Babcock Energy Services, WLL
Position :
Pipe Fitter
Duration :
August 1998 to January 2000
Project :
Qafac, Fabrication
DAZ Island Power Plant Rehabilitaton
Abu-Dhabi, UAE
Job description:
Ensure correct usage of PPE required on site for safety daily routine.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Checking drawings and quantities and ensuring that the calculations are accurate
for the works.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting
torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according to
specifications, by welding, brazing, cementing, soldering, and threading joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using
brackets, clamps, tools or welding equipment.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge,
hydrostatic testing, observation, or other methods.
Lay out full scale drawings of pipe systems, supports, and related equipment,
following blueprints.
Punchlist clearing, perform hydro and pneumatic testing and reinstatement work
including gravity flow testing.
WORK EXPERIENCE:
Company
:
Bobcock Hitachi (Phils.) Ins.
Position :
Panel Worker 2 (Boiler Fabricator)
Duration :
August 1992 to December 1997
Project :
XHW - Hawaii Power Boiler Fabrication Unit 1, 2, and 3
XMF - Miami Florida Power Boiler Fabrication Unit 1, 2, and 3
XCE - Cairo Egypt Power Boiler Fabrication Unit 1 and 2
XTV - Tuwas Singapore Power Boiler Fabrication Unit 1, 2, 3, and 4
XST - Stanwell Australia Power Boiler Fabrication Unit 1, 2, 3, and 4
XKJ - Kure Japan Power Boiler Fabrication Unit 2 and 3
XHJ - Hiroshima Japan Power Boiler Fabrication Unit 3, 4, and 5
Sukat Power Plant, Philippines Fabrication and Rehabilitation of Unit 2 and
3
Job description:
Studies and interpret power boilers blue print such as Single Line drawing,
General Assemble, Detail drawings and part list.
Lay-out and pending on boiler tube prior for outing, bevelling edge preparation
and butt joint fit-up.
Bending of boiler component such as roof wall, conviction gage, super heater, reheater, combustion chamber, and grid panels.
EDUCATIONAL BACKGROUND:
Tertiary
Secondary
Primary
Practical Electricity
Pablo Borbon Memorial Institute of Technology
Rizal Avenue, Batangas City
1986 1988
Pedro S. Tolentino Memorial High School
Ilijan, Batangas City
1980 1984
Ilijan Elementary School
Ilijan, Batangas City
1974 1980
PERSONAL DATA:
Age
Date of Birth
Place of Birth
Civil Status
Citizenship
Sex
Height
Weight
Religion
:
:
:
:
:
:
:
:
:
45 years old
July 07, 1967
Ilijan, Batangas City
Married
Filipino
Male
55
160 lbs.
Roman Catholic
CHARACTER REFERENCES:
Alex P. Pagal
Mechanical/Piping Supervisor
Kentz MEPC (Malaysia) Sdn. Bhd.
Papua New Guinea
Eliceo E. Carnacite
Piping Supervisor
Kentz MEPC (Malaysia) Sdn. Bhd.
Papua New Guinea
Vilfredo Nucom
QA/QC Manager
Kentz MEPC (Malaysia) Sdn. Bhd.
Papua New Guinea
I hereby certify that the above information is true and correct to the best of my
knowledge and belief.
_____________________
Cirilo Daquis Aguila