Professional Documents
Culture Documents
3.4.
ELT 3890 A
LABORATORIO # 5
CUESTIONARIO.
Pgina 1 de 9
ELT 3890 A
LABORATORIO # 5
Series C Enhancements
o
o
o
o
o
o
Floating Point Data provides large numbers from -3.4028 x 1038 to +3.4028 x 1038
1.17549 x 10-38 for even more accurate data when using Compare, Math, Move, File,
and Communication instructions
Programmable Limit Switch (PLS) function lets you configure the High Speed Counter
to operate as a programmable limit switch or rotary cam switch
Copy Word (CPW) instruction copies words of data, in ascending order, from a source
location to a destination location. The data can be the same type or different (i.e., Integer
to Integer or Integer to Floating Point, etc.). Example: The Copy Word instruction can be
used in ladder logic to allow an operator interface (like a PanelView) to adjust the
controller's real time clock for day light savings time.
Real Time Clock Adjust (RTA) instruction synchronizes the controller's Real Time Clock
with an external source (such as a timing beacon, etc.). The RTA instruction will adjust the
RTC to the nearest minute.
Gray Code (GCD) instruction converts Gray code data to an integer value no need
to write conversion routines in ladder, thus saving programming memory
Absolute Value (ABS) instruction takes the absolute value of the source and places it in
the destination. The data range for this instruction is -2,147,483,648 to 2,147,483,647 or
IEEE-754 floating point value. Important: These enhancements are added to Series B or
earlier controllers through a firmware upgrade. This upgrade is not required, except to
access the new features. To use the new features, your controller's firmware and software
should be at the following levels: MicroLogix 1200, Series C, Revision A, FRN 4
(download firmware upgrade), RSLogix 500 version 5.00
o
o
o
o
A Programming / Human Machine Interface (HMI) port in addition to the Channel 0 port:
provides an inexpensive means of providing an extra port that can be used for
programming using a personal computer with Rockwell Software RSLogix 500 software,
or connecting an operator interface device to your controller.
Increased application flexibility
Reduced system cost: enables users to directly connect a local HMI, allowing the other
port to be used for networking, modem connection, programming and other devices
Requires no configuration: DF1 Full Duplex port that has the same parameters as
Channel 0 when it is in its "Default Comms" configuration
Respond Only: Messaging is not available; it communicates by responding to
communications initiated from the device attached to it
Pgina 2 de 9
ELT 3890 A
LABORATORIO # 5
Rockwell Automation anuncia que a partir del 30 de junio de 2017, los sistemas de controlador
lgico programable MicroLogix 1500 Boletn 1764 sern discontinuados y ya no estarn
disponibles para la venta.
Para brindar asistencia tcnica durante la transicin, recomendamos que migre a los Sistemas
PLC MicroLogix 1400 o a los controladores L1 y L2 CompactLogix 5370. Estos controladores
estn diseados con una mejor funcionalidad y con una mayor capacidad de memoria, lo que
representa un cambio ideal ya que admite la mayora de las aplicaciones MicroLogix 1500.
Para obtener ms informacin, consulte MicroLogix 1500 Controller to MicroLogix 1400
Controller and CompactLogix 5370 L1 and L2 Controllers Migration Profile.
Las exigentes condiciones del mercado en cuanto a las soluciones de migracin
plantean desafos significativos. En toda la empresa y a lo largo de todo el ciclo de vida, debe
luchar continuamente para encontrar formas de aprovechar su inversin de automatizacin
existente.
Permita que Rockwell Automation lo ayude a determinar sus opciones de migracin y le muestre
los beneficios, entre ellos, mejor rendimiento, decisiones comerciales ms informadas, costos
reducidos de mantenimiento y respuesta ms rpida a las exigencias cambiantes del mercado.
Utilice la herramienta de bsqueda Estado del ciclo de vida del productopara encontrar
informacin especfica sobre el ciclo de vida mediante el nmero de catlogo.
Pgina 3 de 9
ELT 3890 A
LABORATORIO # 5
3) TALADRADORA
Pgina 4 de 9
ELT 3890 A
LABORATORIO # 5
Pgina 5 de 9
ELT 3890 A
LABORATORIO # 5
Pgina 6 de 9
ELT 3890 A
LABORATORIO # 5
4) LLENADO DE CUBOS
Pgina 7 de 9
3.5.
ELT 3890 A
LABORATORIO # 5
CONCLUSIONES.
Pgina 8 de 9
ELT 3890 A
LABORATORIO # 5
Pgina 9 de 9