The document describes the position sketch of an anchor. It states that the shear force on the anchor is 6.09 kN and the total tensile force is 0 kN. The anchor is a Trubolt or FIX III M10x95 type anchored into a concrete slab with a spacing of 80 mm between the slab and precast wall panels on both sides.
The document describes the position sketch of an anchor. It states that the shear force on the anchor is 6.09 kN and the total tensile force is 0 kN. The anchor is a Trubolt or FIX III M10x95 type anchored into a concrete slab with a spacing of 80 mm between the slab and precast wall panels on both sides.
The document describes the position sketch of an anchor. It states that the shear force on the anchor is 6.09 kN and the total tensile force is 0 kN. The anchor is a Trubolt or FIX III M10x95 type anchored into a concrete slab with a spacing of 80 mm between the slab and precast wall panels on both sides.