Professional Documents
Culture Documents
(FXT)
DISABLE TOF AND PRINTERS ON TCSS
Introduction
As part of the upgrade process from Thomson Reuters Dealing to Thomson Reuters FX Trading (FXT) clients may
disconnect Printers and TOF handler which are connected to the TCSS. If clients do disconnect printer and TOF feeds
from the TCSS then the instructions detailed in this handout must be followed.
The Printer and TOF feeds must be disabled on the TCSS if you want to dual run Dealing 3000 and FXT, and:
1.
Physical Printers or Print Server Pro have been disconnected from the TCSS
2.
The TOF handler (Client Back office system) has been disconnected from the TCSS
Failure to disable the TOF or Printer feeds could cause service issues with the legacy Dealing 3000.
Pre-requirements
Before the changes can be made, a small patch must be downloaded to the TCSS by Thomson Reuters. Please
contact your local Technical account manager (TAM) who can arrange for the installation of this patch.
Username: CSA
Password: client12
Disabling the printer and TOF feeds will delete all TOF and printer data stored in the TCSS.
There is no process available to undelete this data. It is possible to re-enable the Feeds on the TCSS
however this will NOT undelete previously deleted data.
Before making any changes on the TCSS you must confirm that all required data is available via the new FXT
adapter feeds.
Confirm no users are on the system - All Dealing 3000 keystation users must be signed out/off the system before
disable the Serial Printer / TOF.
Confirm no users are on the system- All Dealing 3000 keystation users must be signed out/off the system before
disabling the Serial Printer / TOF.
2.
Username: CSA
Password: client12
For W2003 select Start > All Programs > TCSS Utility:
4.
Select the appropriate links to disable the printer and/or TOF feeds.
2.
In the Transaction Client Site Server window select Reuters Dealing Direct Server.
3.
Click the Stop button. After a few seconds the status will change to Stopped.
4.
In the Transaction Client Site Server window select Reuters Dealing Direct Server.
5.
Click the Start button. After a few seconds the status will change to Running.
6.
The Printers and TOF connections can now be physically disconnected from the TCSS. Printers connect via a
serial connection. TOF is via a UTP network cable (NIC port 2)