Professional Documents
Culture Documents
AziTrak
Features
Benefits
AziTrak
AziTrak
SI Units
121 mm
146 mm - 172 mm
7,16 m
950 kg
Wear Band 136 mm
US Units
SI Units
4-3/4"
172 mm
5-3/4" - 6-3/4"
216 mm - 270 mm
23.5 ft
6,72 m
2,094 lbs
1300 kg
Up & Down Baker Hughes Modular Connection w/ M30
Wear Band 5.33"
213 mm
Drilling fluid driven turbine
US Units
6-3/4"
8-1/2" - 10-5/8"
22.1 ft
2,866 lbs
8-3/8"
SI Units
US Units
SI Units
US Units
121 mm
475 - 1325 lpm
1120 kN
4-3/4"
125 - 350 gpm
251 klbs
172 mm
757 - 3407 lpm
2990 kN
6-3/4"
200 - 900 gpm
672 klbs
400 RPM
302F
150C
302F
1380 bar (20,000 psi) - 1725 bar (25,000 psi) and 2070 bar (30,000 psi) tools available on request
No Limitation
Based on BHA configuration.
80% Max deviation from mean RPM, (e.g. RPM=100: RPM range = 20 - 180), limited by Max. Tool Rotation Specification, (from recorded
memory or as flagged by corresponding real-time severity level)
Refer to Supplemental Technical Specification document TDS-20-60-0000-00.
Regarding RPM, Sand Content, and LCM please refer to Technical Data Sheet of the OnTrak MWD platform.
150C
Sensor Specifications
SI Units
US Units
SI Units
US Units
121 mm
4-3/4"
172 mm
6-3/4"
Range
Accuracy
Vertical Resolution
Deep Azimuthal Propagation Resistivity
Pressure (Annular and Flow Off)
Directional
Range
Resolution
Accuracy1
Vibration
Acceleration Range / Frequency Range
Real-time log options
Post Run / Memory log options
Rotation & Stick-Slip
Rotation Speed
Real-time log options
Post Run / Memory log options
1
2,80 m
4,00 m
1,40 m
5,40 m
9.1 ft
2,60 m
8.5 ft
13.2 ft
3,55 m
11.6 ft
4.6 ft
1,55 m
5.1 ft
17.8 ft
5,01 m
16.4 ft
2 MHz Resistivity
400 kHz Resistivity
Azimuthal Gamma Ray
Phase Difference
Attenuation
Phase Difference
Attenuation
0 - 500 API
0.1 - 3000 ohm-m
0.1 - 500 ohm-m
0.1 - 1000 ohm-m
0.1 - 200 ohm-m
0.85% (0.1 - 50 ohm-m) 0.85% (0.1 - 25 ohm-m) 0.85% (0.1 - 25 ohm-m) 4.0% (0.1 - 10 ohm-m)
2.5 API @ 100 API and
0.4 mS/m
0.85 mS/m
0.8 mS/m
4.0 mS/m
ROP = 18,3 m/hr (60 ft/hr)
(>50 ohm-m)
(>25 ohm-m)
(>25 ohm-m)
(>10 ohm-m)
15,24 cm (6")
20 cm (8") for 90 % response in conductive beds
30 cm (12") for 90 % response in conductive beds
Detection of Boundary: Up to 5,2 m (17 ft)
Range: 0 - 2070 bar (30,000 psi) / Accuracy: 0.25% of full scale / Resolution: 0,35 bar (5 psi)
Sensor Type: Tri-axial Accelerometer and Tri-axial Flux Gate
Magnetic2 Toolface &
Inclination
Azimuth2,3
Total Magnetic Field
Dip Angle2
Gravity3 Toolface
0 - 180
0 - 360
0 - 360
0 - 100,000 nT
-90 - +90
0.09
0.35
1.4
35
0.04
0.1
1.0
1.5
100
0.2
Sensor Type: Axial Vibration: One Accelerometer, z direction / Lateral Vibration: Two Accelerometer, x-y direction
0 - 15 g / 0 - 82 Hz
Lateral and Axial vibration; transmitted as severity level (scaled to g-RMS)
Min., Max., Average & Max. lateral and axial vibration in g-RMS and as severity level
Sensor Type: Two Axis Magnetometer
0 - 1000 RPM (1% Accuracy)
Downhole RPM, Stick-Slip transmitted as severity level
Min., Max., Average RPM, Stick-Slip & Backward Rotation severity
2
Although the information contained herein is believed to be accurate, no other representations are made concerning the information. Under no circumstances shall Baker Hughes be liable for any incorrect or incomplete
information. All technical specifications and commercial information concerning the product and/or services described herein may be changed at any time without further notice. Refer to Supplemental Technical Specifications
(TDS-20-60-0000-00) for further environmental specific specifications and information on the application, operation, and handling of Baker Hughes tools. Technical Data Summaries are controlled documents and can only be
released through the Documentation & Records Management System(s) Group.
AOA-70-01-001