Professional Documents
Culture Documents
Features
Benefits
SI Units
US Units
121 mm
146 - 171 mm
650 kg
4-3/4"
5-3/4" - 6-3/4"
1,432 lbs
3-1/2" IF Box
3-1/2" Reg. Box
7,0 m
23.1 ft
SI Units
US Units
121 mm
4-3/4"
475 - 1 325 lpm
125 - 350 gpm
100 kN
22,500 lbf
50% Maximum deviation from mean
RPM (e.g. 100 RPM: RPM Range=50150), limited by maximum tool rotation
specification, (from recorded memory or as
flagged by corresponding real-time
severity level)
Maximum Tool Rotation
250 RPM
"RPM specification may be reduced depending on circulating temperature, mud
properties and well bore geometry. Please contact Baker Hughes representative for
specific applications."
Maximum Drilling Torque (at the Bit)
14 kNm
10,300 ft-lbf
Maximum Torque to Failure (at the Bit)
18 kNm
13,300 ft-lbf
Max Overpull w/o Rotation
1000 kN
224,808 lbf
(Continued Operation)
Max Overpull w/o Rotation To Failure
2100 kN
472,000 lbf
"Maximum overpull values may be reduced depending on well bore geometry. Please
contact Baker Hughes representative for specific applications."
Operating Temperature
Maximum
150C
302F
Minimum
-20C
-4F
Maximum Hydrostatic Pressure
1380 bar
20,000 psi
Optional High-Pressure Service
2070 bar
30,000 psi
Bit Pressure Drop
No Limitation
Sand Content
1 % max. volume, acc. to API 13B
(<0,5% recommended)
Maximum LCM Concentration
40 ppb = 114 kg/m (Any pumping of LCM
must be carried out according to AutoTrak
G3 operations manual)
Maximum DLS for Tool Passage
With Rotation
10/30 ft
10/100 ft
Without Rotation
30/30 ft
30/100 ft
"Maximum DLS for tool passage should only be used as a guide. Actual limits may vary
depending on BHA configuration. Please contact Baker Hughes representative for
specific applications."
Maximum Axial & Lateral Vibration
Refer to Supplemental Technical
Specification document
TDS-20-60-0000-00
Near Bit Inclination
Sensor Type: 3-Axis Accelerometer
Package
Distance from Bottom of Tool
1,16 m
3.8 ft
Although the information contained herein is believed to be accurate, no other representations are made concerning the information. Under no circumstances shall Baker Hughes be liable for any incorrect or incomplete
information. All technical specifications and commercial information concerning the product and/or services described herein may be changed at any time without further notice. Refer to Supplemental Technical Specifications
(TDS-20-60-0000-00) for further environmental specific specifications and information on the application, operation, and handling of Baker Hughes tools. Technical Data Summaries are controlled documents and can only be
released through the Documentation & Records Management System(s) Group.
ATKV-70-01-001