J. A. Alloca, Transducers: Theory and Application, Reston Publishing (1984).
J. L. Bower and P. M. Schultheiss, Introduction to the Design of Servomechanisms, John Wiley and Sons, New York (1958). T. B. Bullock, Servo Basics for the Layman, Industrial Controls Consulting (1991). J. J. DAzzo and C. H. Houpis, Linear Control System and Design, 3rd ed., McGrawHill, New York (1988). R. C. Dorf, Modern Control Systems, 6th ed., Addison-Wesley, Reading, MA (1992). G. Ellis, Control System Design Guide, Academic Press, San Diego (1991). Eveleigh, Adaptive Control and Optimization Techniques, McGraw-Hill, New York (1967). G. F. Franklin, J. D. Powel, and A. Emami-Naeini, Feedback Control of Dynamic Systems, Addison-Wesley, Reading, MA (1988). H. Gross, Electrical Feed Drives for Machine Tools, John Wiley and Sons, New York (1983). G. H. Jones, U.S. Patent 3,358,201, Apparatus for compensating machine feed drive servomechanisms, December 12, 1967. T. S. Kenjo and Nagamori, Permanent-Magnet and Brushless DC Motors, Clarendon Press, (1985). B. C. Kuo, Automatic Control Systems, 7th ed. Prentice Hall, (1993). E. Lewis and H. Stern, Design of Hydraulic Control Systems, McGraw-Hill, New York (1962). H. E. Merritt, Hydraulic Control Systems, John Wiley and Sons, New York (1967). S. Noodleman and B. R. Patel, Duty cycle characteristics for DC servomotors, IEEE IAS Trans., 1A-9(5) (1973).
Copyright 2003 by Marcel Dekker, Inc. All Rights Reserved
R. G. Seippel, Transducers, Sensors, and Detectors, Reston Publishing (1984).
S. M. Shinners, Minimizing servo load resonance error, Control Engineering, January 15, 1962. G. J. Thaler and M. P. Pastel, Analysis and Design of Nonlinear Feedback Control Systems, McGraw-Hill, New York (1962). G. Young and J. G. Bollinger, A research report on the principles and applications of frequency selective feedback, University of Wisconsin, Department of Mechanical Engineering, Engineering Experimental Station, March 1969. G. W. Younkin, Applying and Sizing Machine Servo Drives, SME paper MS90-300, International Manufacturing Technology Conference, September 6, 1990. G. W. Younkin, Modeling machine tool feed servo drives using simulation techniques to predict performance, IEEE IAS Trans., 27(2):268274 (1991). G. W. Younkin, Modeling machine tool feed servo drives using simulation techniques to predict performance, IEEE Transactions on Industry Applications, 27(2) (1991). G. W. Younkin, Industrial Servo Control SystemsFundamentals and Applications, 1st ed., Marcel Dekker, Inc., New York (1996). G. W. Younkin, Brushless DCMotor and Current Servo Loop Analysis Using PI Compensation. G. W. Younkin and T. B. Bullock, Taking the mystery out of motion-control algorithms, Machine Design, January 12 (1995). G. W. Younkin and T. B. Bullock, Bode diagrams analyze servosystems, Machine Design, February 9, 1995. G. W. Younkin, W. D. McGlasson, and R. D. Lorenz, Considerations for Lowinertia ac drives in machine tool axis servo applications, IEEE IAS Trans., 27(2):262267 (1991). G. W. Younkin and R. H. Welch, How Temperature Affects a Servo Motors Electrical and Mechanical Time Constants, IAS paper 27, IEEE Annual Meeting, Pittsburgh, October 1318, 2002.
Copyright 2003 by Marcel Dekker, Inc. All Rights Reserved
The Relationship Between Emotional Maturity and Psychosocial Adjustment Among First-Year Undergraduate Students in Amhara Region Public Universities, Ethiopia