Professional Documents
Culture Documents
SERIES 500 No battery or origin reset needed for IP67 Digital Caliper
ID 0000006683
FEATURES
This unique* eco-friendly solar-powered
Super Caliper requires no battery.
Insufficient
illumination state
Sufficient
illumination state
Super Caliper
No need for
origin set up
16.78mm
Ra: 0.126m
Ra: 0.07m
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .0005"/0.01mm or 0.01mm
Repeatability: .0005 / 0.01mm
Display:
LCD
Length standard: ABSOLUTE electromagnetic induction linear
encoder
Max. response speed: Unlimited
Battery:
Solar cell*
Dust/Water protection level: IP67
*Can be used continuously above 60 lux ambient illumination.
Function
Origin-set, inch/mm conversion (on inch/metric models only)
Alarm:
Counting value composition error
Optional Accessories
05CZA624: SPC cable with data switch (40 / 1m)
05CZA625: SPC cable with data switch (80 / 2m)
500-784
SPECIFICATIONS
Inch/Metric
Metric
Range
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
Order No.
500-776
500-774*
500-777
500-775*
Accuracy
0.02mm
0.02mm
0.02mm
0.02mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
Range
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
Order No.
500-786
500-784*
500-787
500-785*
Accuracy
.001
.001
.001
.001
Resolution
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
>
Dust-tight
No ingress of dust.
Protected against the effects of temporary
immersion in water.
Ingress of water in quantities causing harmful
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time
(30 min.).
Range
0 - 6 / 0 - 150mm
0 - 8 / 0 - 200mm
Jaw thickness: 3.5mm
D-2
L
233
290
a
21
24.5
b
16.5
20
c
40
50
d
16
16
Mass (g)
180
210
FEATURES
No more repeated zero setting caused by
low-light intensity.
Hard-coated solar panel for increased
durability.
No fear for overspeed errors.
With thumb roller.
Supplied in fitted plastic case.
500-474
Optional Accessories
959143:
959149:
959150:
Order No.
500-443
500-453*
500-444
500-454*
500-445
500-455*
Range
0 - 100mm
0 - 100mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
Accuracy
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
1.9mm round depth bar
1.9mm round depth bar
Accuracy
.001
.001
.001
.001
.001
.001
Resolution
Remarks
.0005 / 0.01mm .075 round depth bar
.0005 / 0.01mm .075 round depth bar
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
Inch/Metric
Range
0 - 4" / 0 - 100mm
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
Order No.
500-463
500-473*
500-464
500-474*
500-465
500-475*
Function
Metric
SPECIFICATIONS
Range
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
>
Technical Data
D-3
L
182
233
290
a
40
40
50
b
21
21
24.5
c
16.5
16.5
20
Mass (g)
125
150
180
FEATURES
Can be used in workshop conditions
exposed to coolant, water, dust or oil.
Easy to use - no need to wipe or clean the
scale.
Advanced design.
Character height increased from 7.4mm to
9.0mm for improved readability.
500-752-20
500-763-20
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .0005"/0.01mm or 0.01mm
Repeatability: .0005 / 0.01mm
Display:
LCD
Length standard: ABSOLUTE electromagnetic induction
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc./2 pcs*), 938882
Battery life: Approx. 5 years under normal use
(1 year: over 12 / 300mm models)
Dust/Water protection level: IP67
*0 - 300mm model
Function
Origin-set, Zero-setting, Automatic power on/off, Data
output, inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
Built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without
origin resetting. Its as easy as vernier caliper measurements.
*i"
*i"
n
Optional Accessories
05CZA624: SPC cable with data switch (40 / 1m)
05CZA625: SPC cable with data switch (80 / 2m)
}
ii}
05CZA624
Certificate of inspection
D-4
Valve
Master
Capsule
Differential
pressure gage
SPECIFICATIONS
Metric
Range
0-150mm
0-150mm
0-150mm
0-150mm
0-150mm
0-200mm
0-200mm
0-200mm
0-200mm
0-300mm
0-300mm
IP67 model
Order No.
500-702-20*
500-712-20
500-719-20
500-721-20
500-723-20
500-703-20*
500-713-20
500-722-20
500-724-20
500-704-10*
500-714-10
Accuracy
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.02mm
+/-0.03mm
+/-0.03mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
Inch/Metric
Resolution
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
Remarks
.075 rod depth bar
.075 rod depth bar
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD measurement
carbide-tipped jaws for OD & ID measurement
carbide-tipped jaws for OD & ID measurement
Unit: mm
Accuracy
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.0015
+/-.0015
Level 7:
Dust-tight
No ingress of dust.
Protected against the effects of temporary
immersion in water.
Ingress of water in quantities causing harmful
effects shall not be possible when the enclosure
is temporarily immersed 1 meter in water under
standardized conditions of pressure and time (30
min.).
IP67 model
Order No.
500-752-20*
500-762-20
500-768-20*
500-769-20
500-731-20*
500-735-20
500-733-20*
500-737-20
500-753-20*
500-763-20
500-732-20*
500-736-20
500-734-20*
500-738-20
500-754-10*
500-764-10
Level 6:
Range
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-6/0-150mm
0-8/0-200mm
0-8/0-200mm
0-8/0-200mm
0-8/0-200mm
0-8/0-200mm
0-8/0-200mm
0-12/0-300mm
0-12/0-300mm
Range
0 - 6 / 0 - 150mm
0 - 8 / 0 - 200mm
0 - 12 / 0 - 300mm
D-5
L
233
290
404
a
40
50
64
b
21
24.5
27.5
c
16.5
20
22
e
16
16
20
Mass (g)
168
198
350
Ra: 0.126m
Ra: 0.07m
500-197-30
500-151-30
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .0005/0.01mm or 0.01mm
Repeatability: .0005/ 0.01mm
Display:
LCD
Length standard:
ABSOLUTE electromagnetic induction type linear encoder
(200mm and smaller models)
ABSOLUTE electrostatic capacitance type linear encoder
(300mm and larger models)
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Function
Origin-set, Zero-setting, Data output,
inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
Mass (g)
143
168
198
350
959143:
959149:
959150:
L unit
Data hold
SPC cable with data switch (40 / 1m)
SPC cable with data switch (80 / 2m)
Optional Accessories
C
a
40
40
50
64
L
182
233
290
403
Range
0 - 4 / 0 - 100mm
0 L- 6 / 0 - 150mm
0 - 8 / 0 - 200mm
0 - 12 / 0 - 300mm
959143
>
>
Range
0 - 18 / 0 - 450mm
0 - 24 / 0 - 600mm
0 - 40 / 0 - 1000mm
D-6
L
630
780
1240
a
90
90
130
b
47
47
61
c
38
38
50
d
25
25
32
Mass (g)
1170
1350
3300
959149
500-506-10
500-502-10
500-501-10
500-500-10
SPECIFICATIONS
Metric
Range
0 - 100mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 450mm
0 - 600mm
0 - 1000mm
Order No.
500-150-30
500-151-30
500-154-30
500-155-30
500-158-30
500-152-30
500-156-30
500-157-30
500-153
500-500-10
500-501-10
500-502-10
Accuracy
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.03mm
0.05mm
0.05mm
0.07mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
1.9mm rod depth bar
Inch/Metric
Range
0 - 4" / 0 - 100mm
0 - 4" / 0 - 100mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
Order No.
500-170-30
500-195-30*
500-171-30
500-174-30
500-175-30
500-178-30
500-196-30*
500-159-30*
500-160-30*
500-172-30
500-176-30
500-177-30
500-197-30*
500-163-30*
500-164-30*
500-173
500-167
500-168
500-193*
500-165*
500-166*
500-505-10
500-506-10
500-507-10
Accuracy
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.0015
.0015
.0015
.0015
.0015
.0015
.002
.002
.003
Resolution
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
D-7
Remarks
.075" rod depth bar
.075" rod depth bar
Dial Caliper
SERIES 505
FEATURES
New designed dial movement for ultrasmooth sliding and high-shock protection.
Improved finish on sliding surfaces for
longevity.
New face for improved readability.
Removal of TiN coating on sliding surfaces
without sacrificing wear life.
505-746
505-742-56
505-745
SPECIFICATIONS
Metric
Range
0-150mm
0-200mm
Metric
Range
0-150mm
0-150mm
0-150mm
0-200mm
0-300mm
Accuracy
+/-0.03mm
+/-0.03mm
Graduation
0.01mm
0.01mm
Remarks
Graduation
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
Remarks
Accuracy
+/-0.03mm
+/-0.03mm
+/-0.03mm
+/-0.03mm
+/-0.04mm
D-8
SPECIFICATIONS
Inch
Measurement Applications
1. Outside measurement
.1 Per Revolution
Order No.
505-742
505-742-51
505-742-52
505-742-53
505-742-54
505-742-55
505-742-56
505-736
505-738
505-743
505-737
505-739
505-746
505-747
505-748
Range
0-6
0-6
0-6
0-6
0-6
0-6
0-6
0-6
0-6
0-8
0-8
0-8
0-12
0-12
0-12
Accuracy
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.001
+/-.002
+/-.002
+/-.002
+/-.002
+/-.002
+/-.002
Graduation
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
Remarks
Blue Dial Face
Purple Dial Face
Green Dial Face
Red Dial Face
Orange Dial Face
Black Dial Face
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
Carbide-tipped jaws for OD measurement
Carbide-tipped jaws for OD & ID measurement
2. Inside measurement
Inch
3. Step measurement
.2 Per Revolution
Order No.
505-740
505-744
505-741
505-749
505-750
Range
0-6
0-6
0-8
0-12
0-12
Accuracy
+/-.001
+/-.001
+/-.002
+/-.002
+/-.002
Graduation
.001
.001
.001
.001
.001
Remarks
Unit: mm
>
Range
0 - 4"/ 0 - 100mm
0 - 6"/ 0 - 150mm
0 - 8"/ 0 - 200mm
0 - 12"/ 0 - 300mm
D-9
L
180
231
288
403
a
40
40
50
64
b
21
21
24.5
27.5
c
16.5
16.5
20
22
d
16
16
16
20
Mass (g)
150
175
185
370
Vernier Caliper
SERIES 530 Standard Model
FEATURES
Measures OD (outside diameter), ID (inside
diameter), depth, and steps.
The small vernier face angle (14) provides
easy reading.
Dual reading scales on vernier.
(metric/inch and inch models only).
Lock screw for holding the sliding jaw
position.
{c
530-101
530-109
Carbide-tipped
>
Range
0 - 150mm
0 - 200mm
0 - 300mm
0 - 600mm
0 - 1000mm
D-10
L
229
288
403
780
1240
a
40
50
64
90
130
b
21
24.5
27.5
47
60
c
17
20.5
22
38
50
d
16
16
20
25
32
Mass (g)
143
180
335
1,300
3,300
SPECIFICATIONS
Metric
Measurement Applications
OD measurement
Order No.
530-102
530-101
530-320
530-335
530-122*
530-108
530-321
530-123*
530-109
530-322
530-124*
530-501**
530-502 **
Range
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 150mm
0 - 200mm
0 - 200mm
0 - 200mm
0 - 300mm
0 - 300mm
0 - 300mm
0 - 600mm
0 - 1000mm
Graduation
0.05mm
0.05mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
0.02mm
0.05mm
0.05mm
Remarks
1.9mm Depth bar
*Graduation: 0.02mm
**No depth measuring bar
Metric/Inch
ID measurement
Accuracy
0.05mm
0.05mm
0.05mm
0.05mm
0.03mm
0.05mm
0.05mm
0.03mm
0.08mm
0.08mm
0.04mm
0.1mm
0.15mm
Range
Order No.
Accuracy
0 - 150mm / 0 - 6
0 - 150mm / 0 - 6
0 - 150mm / 0 - 6
0 - 200mm / 0 - 8
0 - 200mm / 0 - 8
0 - 300mm / 0 - 12
0 - 300mm / 0 - 12
530-104
530-316
530-312*
530-114
530-118*
530-115
530-119*
0.05mm
0.05mm
0.03mm
0.05mm
0.03mm
0.08mm
0.04mm
Vernier Graduation
Lower Scale
Upper Scale
0.05mm
1/128"
0.05mm
1/128"
0.02mm
.001"
0.05mm
1/128"
0.02mm
.001"
0.05mm
1/128"
0.02mm
.001"
Remarks
High-accuracy model
High-accuracy model
High-accuracy model
*Graduation: 0.02mm
Inch
Range
Order No.
Accuracy
0 - 6"
0 - 8"
530-105
530-116
.0015
.0015
Vernier Graduation
Lower Scale Upper Scale
.001
1/128"
.001
1/128"
Step measurement
Depth measurement
D-11
Remarks
Vernier Caliper
Thumb clamp
Measurement Applications
531-101
OD measurement
SPECIFICATIONS
Metric
Order No.
531-101
531-102
531-103
Range
0 - 150mm
0 - 200mm
0 - 300mm
Accuracy
0.05mm
0.05mm
0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Remarks
ID measurement
Metric/Inch
Remarks
with inch/mm conversion label
High-accuracy model
High-accuracy model
High-accuracy model
Step measurement
>
Unit: mm
Range
0 - 6"/ 0 - 150mm
0 - 8"/ 0 - 200mm
0 - 300mm
L
229
288
403
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Mass (g)
142
175
360
Depth measurement
D-12
Vernier Caliper
FEATURES
Provided with a fine-adjustment carriage
to feed the slider finely.
Can measure OD, ID, depth and steps.
Supplied with vinyl holster in fitted carton.
532-101
OD measurement
SPECIFICATIONS
Metric
Order No.
532-101
532-102
532-103
Range
0 - 130mm
0 - 180mm
0 - 280mm
ID measurement
Metric/Inch
Accuracy
0.03mm
0.03mm
0.04mm
Graduation
0.02mm
0.02mm
0.02mm
Range
0 - 130mm / 0 - 5 532-119
0 - 180mm / 0 - 7 532-120
0 - 280mm / 0 - 11 532-121
Accuracy
Lower Scale
0.02mm
0.02mm
0.02mm
0.03mm
0.03mm
0.04mm
Graduation
Upper Scale
.001"
.001"
.001"
Unit: mm
>
Range
0 - 5" / 0 - 130mm
0 - 7" / 0 - 180mm
0 - 11" / 0 - 280mm
Depth measurement
D-13
L
229
288
403
a
40
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
Mass (g)
165
202
395
Vernier Caliper
FEATURES
The jaws have round measuring faces for
accurate ID measurement.
With fine adjustment carriage to feed the
slider.
Inside and outside measurements can be
directly read from the upper and lower
slider graduations, respectively.
160-101
160-116
SPECIFICATIONS
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
160-127
160-128
160-101
160-104
160-110
160-113
0.04mm
0.05mm
0.05mm
0.07mm
0.09mm
0.12mm
Graduation
Lower Scale Upper Scale
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
0.02mm
Mass (g)
Graduation
Lower Scale Upper Scale
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
Mass (g)
450
1,200
2,600
3,500
4,850
10,200
160-150
160-151
160-153
160-155
160-157
160-159
0.04mm
0.05mm
0.05mm
0.07mm
0.09mm
0.12mm
450
1,200
1,400
3,500
4,850
10,200
Inch
Order No.
Accuracy
0 (.3) - 12"
0 (.5) - 18"
0 (.5) - 24"
0 (1) - 40"
0 (1) - 60"
0 (1) - 80"
160-124
160-116
160-102
160-105
160-111
160-114
.0015"
.002"
.002"
.003"
.004"
.005"
Unit: mm
Graduation
Lower Scale Upper Scale
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
Mass (g)
Graduation
Lower Scale Upper Scale
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
.001
0.02mm
Mass (g)
450
1,200
1,400
3,500
4,850
10,200
Inch/Metric
Range*
DIMENSIONS
Metric/Inch
Range*
Metric
Range*
Range*
160-125
160-119
160-103
160-106
160-112
160-115
.0015"
.002"
.002"
.003"
.004"
.005"
D-14
450
1,200
1,400
3,500
4,850
10,200
Range
0 - 12 / 0 - 300mm
0 - 18 / 0 - 450mm
0 - 24 / 0 - 600mm
0 - 40 / 0 - 1000mm
0 - 60 / 0 - 1500mm
0 - 80 / 0 - 2000mm
L
445
630
780
1240
1800
2300
a
95
125
125
172
212
220
b
75
100
100
140
180
180
c
12
18
18
24
30
30
d
20
25
25
32
32
40
e
10
14.8
14.8
17
19
23
T
3.8
6
6
8
8
12
FEATURES
6ii
}>`>
>V>i
}>`>
*>>iV>iv>Vi
Technical Data
160-131
550-311-10
SPECIFICATIONS
Metric
Range*
0 (10) - 200mm
0 (10) - 300mm
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
Digital model
Order No.
550-301-10
550-331-10
550-203-10**
550-205-10**
550-207-10**
Accuracy
0.03mm
0.03mm
0.05mm
0.05mm
0.07mm
Inch/Metric
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Digital model
Range*
Order No.
0 (.4) - 8" / 0 (10) - 200mm 550-311-10
0 (.4) - 12" / 0 (10) - 300mm 550-341-10
Accuracy Resolution
Mass (g) Remarks
.001" .0005 / 0.01mm 180
IP67
.0015" .0005 / 0.01mm 380
w/ offset/preset function for easy ID
measurement, IP67
0 (.5) - 18" / 0 (20) - 450mm 550-223-10** .002" .0005 / 0.01mm 1,110
0 (.5) - 24" / 0 (20) - 600mm 550-225-10** .002" .0005 / 0.01mm 1,290
0 (1) - 40" / 0 (20) - 1000mm 550-227-10** .003" .0005 / 0.01mm 3,350
*( ): Minimum dimension in ID measurement **Models are not IP67 rated
Metric
Range*
0 (20) - 450mm
0 (20) - 600mm
0 (20) - 1000mm
0 (20) - 1500mm
0 (20) - 2000mm
Order No.
160-130
160-131
160-132
160-133
160-134
Accuracy
0.10mm
0.10mm
0.15mm
0.22mm
0.28mm
Graduation
0.02mm
0.02mm
0.02mm
0.05mm
0.05mm
Mass (g)
1,100
1,300
3,350
4,850
10,000
Remarks
DIMENSIONS
Unit: mm
( ): Digital models
T
D-15
Range
0 - 8"/ 0 - 200mm
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60 / 0 - 1500mm
0 - 80 / 0 - 2000mm
L
288 (290)
445
632
780
1240
1800
2300
a
60
75
100
100
140
180
180
b
8
12
18
18
24
30
30
d
16
20
25
25
32
32
40
T
3
3.8
6
6
8
8
12
FEATURES
Long jaws for measuring hard-to-reach
features.
534-110
534-114
SPECIFICATIONS
Metric
Range*
534-109
534-110
0 (10) - 300mm
0 (20) - 500mm
Accuracy
0.07mm
0.13mm
Graduation
Upper Scale
0.05mm
0.05mm
Mass (g)
Lower Scale
0.05mm
0.05mm
Graduation
Upper Scale
0.02mm
0.02mm
0.02mm
0.02mm
Mass (g)
Lower Scale
0.02mm
0.02mm
0.02mm
0.02mm
Graduation
Upper Scale
1/128
.001
1/128
.001
1/128
.001
1/128
.001
Mass (g)
Lower Scale
0.05mm
0.02mm
0.05mm
0.02mm
0.05mm
0.02mm
0.05mm
0.02mm
Graduation
Upper Scale
.001
.001
.001
.001
Mass (g)
Lower Scale
.001
.001
.001
.001
400
1,400
Metric
Range*
534-113
534-114
534-115
534-116
0 (10) - 300mm
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
Accuracy
0.04mm
0.06mm
0.08mm
0.10mm
Technical Data
460
1,500
2,900
3,500
Metric/Inch
Range*
534-101
534-105
534-102
534-106
534-103
534-107
534-104
534-108
0.07mm
0.04mm
0.13mm
0.06mm
0.16mm
0.08mm
0.20mm
0.10mm
460
460
1,500
1,500
2,900
2,900
3,500
3,500
Inch
Range*
534-117
534-118
534-119
534-120
0 (.3) - 12"
0 (.8) - 20"
0 (.8) - 30"
0 (.8) - 40"
Accuracy
.002"
.003"
.004"
.004"
400
1500
2900
3500
DIMENSIONS
L
Unit: mm
Range
0 - 12 / 0 - 300mm
0 - 20 / 0 - 500mm
0 - 30 / 0 - 750mm
0 - 40 / 0 - 1000mm
D-16
L
445
682
995
1230
a
110
225
232
232
b
90
200
200
200
c
12
18.5
18.5
18.5
d
20
25
32
32
e
7
12
12
12
T
3.8
6
8
8
FEATURES
Supplied in fitted plastic holster in carton.
18" / 450mm and larger supplied wooden
case.
Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.01mm or .0005"/0.01mm
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
551-311-10
SPECIFICATIONS
Metric
Digital model
Range*
0 (10) - 200mm
0 (10) - 300mm
Order No.
551-301-10
551-331-10
0 (20) - 500mm
0 (20) - 750mm
0 (20) - 1000mm
551-204-10** 0.06mm
551-206-10** 0.06mm
551-207-10** 0.07mm
Accuracy
0.03mm
0.04mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Inch/Metric
Digital model
Range*
Order No.
0 (.4) - 8" / 0 (10) - 200mm 551-311-10
0 (.4) - 12" / 0 (10) - 300mm 551-341-10
Accuracy
.001"
.002"
Resolution
Mass (g) Remarks
.0005 / 0.01mm 180
IP67
.0005 / 0.01mm 380
w/ offset/preset function for
easy ID measurement, IP67
.0005 / 0.01mm 1,060
.0005 / 0.01mm 1,410
.0005 / 0.01mm 3,430
DIMENSIONS
Unit: mm
Range
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
0 - 20" / 0 - 500mm
0 - 30" / 0 - 750mm
0 - 40" / 0 - 1000mm
a
60
90
150
150
150
b
43
68
115
115
115
c
8
10
15
15
20
d
30
40.1
56
56
56
R
T
D-17
R
5
5
10
10
10
T
3
3.8
6
8
8
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .0005/0.01mm or 0.01mm
Display:
LCD
Length standard: Electrostatic capacitance type linear
encoder
Max. response speed: unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3,000 hours in continuous use
552-314-10
552-155-10
Function
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Data output,
inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
SPECIFICATIONS
Metric
Range*
0(20)-450mm
0(20)-450mm
0(20)-450mm
0(20)-600mm
0(20)-600mm
0(20)-600mm
0(20)-1000mm
0(20)-1000mm
0(20)-1500mm
0(20)-1500mm
0(20)-2000mm
0(20)-2000mm
Order No.
552-302-10
552-150-10
552-155-10
552-303-10
552-151-10
552-156-10
552-304-10
552-152-10
552-305-10
552-153-10
552-306-10
552-154-10
Accuracy
+/-0.04mm
+/-0.06mm
+/-0.04mm
+/-0.04mm
+/-0.06mm
+/-0.04mm
+/-0.05mm
+/-0.07mm
+/-0.09mm
+/-0.11mm
+/-0.12mm
+/-0.14mm
Resolution
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Remarks
long jaws 200mm
ceramic jaws
long jaws 200mm
ceramic jaws
long jaws 200mm
long jaws 200mm
long jaws 200mm
Optional Accessories
05CZA624: SPC cable with data switch (40/ 1m)
05CZA625: SPC cable with data switch (80/ 2m)
914055:*
914056:*
914057:*
914058:*
914053:**
Inch/Metric
Range*
0(.5)-18
0(.5)-18
0(.5)-18
0(.5)-24
0(.5)-24
0(.5)-24
0(1)-40
0(1)-40
0(1)-60
0(1)-60
0(1)-80
0(1)-80
Order No.
552-312-10
552-160-10
552-165-10
552-313-10
552-161-10
552-166-10
552-314-10
552-162-10
552-315-10
552-163-10
552-316-10
552-164-10
Accuracy
+/-.002
+/-.0025
+/-.002
+/-.002
+/-.0025
+/-.002
+/-.002
+/-.003
+/-.004
+/-.0045
+/-.005
+/-.0055
Resolution
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
.0005/0.01mm
Remarks
long jaws 7.9
ceramic jaws
long jaws 7.9
ceramic jaws
Centerline Attachments
Attachment Clamps
D-18
Pointed ID Measuring
Attachments
552-151-10
Ceramic jaws
Centerline attachments
ID point attachments
3TANDARDMODELS
#ERAMICJAWMODELS
,ONGJAWMODELS
10
Range
D
0 - 18" / 0 - 450mm
0 - 24" /0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
95
Pointed
ID Measuring
Attachments
50
L
640
790
1230
1740
2250
a
100
100
150
150
150
b
18
18
24
24
24
c
41.2
41.2
62.8
62.8
62.8
): inch/mm models
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
Mass (g)
715
790
1,760
2,160
2,560
10
Range
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
Centerline
Attachments
100
e
25
25
32
32
32
)NTERCHANGEABLEJAWMODELS
Unit: mm
40
10
d
91.8
91.8
113.8
113.8
113.8
L
680
830
1280
1790
2300
a
200
200
200
200
200
b
24
24
24
24
24
): inch/mm models
D-19
c
89
89
110
110
110
d
91.8
91.8
113.8
113.8
113.8
e
25
25
32
32
32
f
10 (.25")
10 (.25")
10 (.5")
10 (.5")
10 (.5")
Mass (g)
1,215
1,290
2,090
2,490
2,890
SPECIFICATIONS
Inch/Metric
Range
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
0 - 40" / 0 - 1000mm
0 - 60" / 0 - 1500mm
0 - 80" / 0 - 2000mm
Order No.
552-191-10
552-192-10
552-193-10
552-194-10
552-195-10
Accuracy
.002"
.002"
.002"
.004"
.005"
Mass(g)
650
725
1480
1880
2280
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .0005"/0.01mm
Display:
LCD
Scale type: ABSOLUTE electromagnetic linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
Dust/Water protection level: IP66
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
Standard Type
0.5
4.5
Order No.
07CZA058
07CZA059
Scriber Type
60
Order No.
07CZA055
Components
a
Right (07CAA044), 28mm
Left (07CAA045) (1.1")
b
30mm
(1.2")
Components
a
07CZA041 x 2pcs. 25mm
07CZA048 x 2pcs. 1"
b
50mm
2"
Components
a
Right (07CZA042), 8mm
Left (07CZA043)
Right (07CZA042), 031"
Left (07CZA049)
b
30mm
Scriber Type
07CZA061
Order No.
07CZA056
35
1.2"
Centerline Type
9
Order No.
07CZA044
a
3.5" / 90mm
b
1.1" / 28mm
Centerline Type
30
Unit: mm
Order No.
07CZA057
07CZA060
1
a
b
D-20
Components
a
07CZA039 x 2pcs. 30mm
07CZA047 x 2pcs. 1.2"
b
30mm
1.2"
Functions
Origin-set, Zero-setting, Presetting, Offsetting, Data hold,
Automatic power on/off, Data output, inch/mm conversion
(inch/mm models)
Alarm:
Low voltage, Counting value composition error
Optional Accessories
05CZA624: SPC cable with data switch (40 / 1m)
05CZA625: SPC cable with data switch (80 / 2m)
Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.01mm
Display:
LCD
Length standard*: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
573-117-10
(Center-to-center type)
Function
Origin-set, Zero-setting, Power On/Off, Data output
Alarm:
Low voltage, Counting value composition error
573-119-10
(Edge-to-center type)
Optional Accessories
Data hold unit
SPC cable with data switch (1m)
SPC cable with data switch (2m)
SPECIFICATIONS
Metric
Range
10 - 200mm
10 - 300mm
Metric
Range
10 - 200mm
10 - 300mm
Accuracy
0.10mm
0.15mm
DIMENSIONS
Unit: mm
5
1
20
30
30
30
64
64
30
959143:
959149:
959150:
10
20
573-116-10 / 573-117-10
573-118-10 / 573-119-10
D-21
1
10
Offset Caliper
FEATURES
Main scale jaw can slide up and down to
facilitate measurement of stepped sections.
(Hard-to-reach dimensions such as A, B, C
can be accurately measured.)
With depth bar.
With SPC data output. (Series 573)
Supplied in fitted plastic case.
536-101
Technical Data
Accuracy: Refer to the list of specifications
Resolution*: .0005"/0.01mm or 0.01mm
Graduation**: 0.05mm
Display*:
LCD
Length standard*: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed*: Unlimited
Battery*:
SR44 (1 pc.), 938882
Battery life*: Approx. 3.5 years under normal use
573-701
SPECIFICATIONS
Metric
Digital model
Range
0 - 150mm
0 - 200mm
0 - 300mm
Order No.
573-601
573-602
573-604
Accuracy
0.02mm
0.02mm
0.03mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
168
198
350
Order No.
536-101
536-102
536-103
Accuracy
0.05mm
0.05mm
0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
150
200
400
Resolution
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
Mass (g)
168
198
350
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Inch/Metric
Range
0 - 6" / 0 - 150mm
0 - 8" / 0 - 200mm
0 - 12" / 0 - 300mm
Digital model
Order No.
573-701
573-702
573-704
Accuracy
.001"
.001"
.0015"
DIMENSIONS
Unit: mm
>
Digital model
6ii`i
L
Range
0 - 6 / 0 - 150mm
0 - 8 / 0 - 200mm
0 - 12 / 0 - 300mm
a
95
95
135
( ) Digital Model
D-22
b
10
10
15
c
40
50
64
d
30.4 (30)
40.4 (38.5)
51
FEATURES
Hole diameter should be in the range of
1.5mm - 10mm (.06" - .4").
With SPC data output. (Series 573)
Supplied in fitted plastic case.
573-605
SPECIFICATIONS
Metric
Digital model
Order No.
573-605
573-606
573-608
Range
10 - 150mm
10 - 200mm
10 - 300mm
Inch/Metric
Accuracy
0.03mm
0.03mm
0.04mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
157
177
320
Digital model
Order No.
573-705
573-706
573-708
Range
.4 - 6" / 10 - 150mm
.4 - 8" / 10 - 200mm
.4 - 12" / 10 - 300mm
Accuracy
.0015"
.0015"
.0015"
Resolution
.0005 / 0.01mm
.0005 / 0.01mm
.0005 / 0.01mm
Mass (g)
157
177
320
Metric
Order No.
536-105
536-106
536-107
Range
10 - 150mm
10 - 200mm
10 - 300mm
Accuracy
0.05mm
0.05mm
0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
140
160
320
DIMENSIONS
W
Analog model
10
30
Unit: mm
30
10
Range
10 - 150mm
10 - 200mm
10 - 300mm
Digital model
10
1
10
t
536-105
W
75
75
100
t
3
3
3.8
Range
W
10 - 160mm/.4 - 6.4
75
10 - 210mm/.4 - 8.4
75
10 - 310mm/.4 - 12.4 100
D-23
t
3.5
3.5
3.8
Point Caliper
FEATURES
With depth bar.
With SPC data output. (Series 573)
Supplied in fitted plastic case.
573-721
Technical Data
536-121
SPECIFICATIONS
Metric
Digital model
Order No. Accuracy Resolution
573-621
0.02mm 0.01mm
573-625
0.02mm 0.01mm
Range
0 - 150mm
0 - 150mm
Mass (g)
163
163
Inch/Metric
Digital model
Range
Order No. Accuracy
0 - 6" / 0 - 150mm 573-721
.001"
0 - 6" / 0 - 150mm 573-725
.001"
Resolution
Mass (g)
.0005 / 0.01mm 163
.0005 / 0.01mm 163
Metric
Order No.
536-121
Range
0 - 150mm
Accuracy Graduation
0.05mm 0.05mm
Mass (g)
150
DIMENSIONS
10
25
40
30
Unit: mm
0.3
40
30
21
10
40
30
10
21
573-625, 573-725
0.3
536-121
D-24
0.3
0.3
573-621, 573-721
Blade-Type Caliper
FEATURES
Technical Data
573-734
SPECIFICATIONS
Metric
Range
0 - 150mm
Digital model
Order No.
573-634
Accuracy Resolution
0.02mm 0.01mm
Mass (g)
168
Inch/Metric
Digital model
Range
Order No.
Accuracy Resolution
Mass (g)
0 - 6" / 0 - 150mm 573-734
.001" .0005 / 0.01mm 168
Metric
Order No.
536-134
536-135
536-136
Range
0 - 150mm
0 - 200mm
0 - 300mm
Accuracy
0.05mm
0.05mm
0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
130
160
340
DIMENSIONS
Unit: mm
3.5
20
40
0.75
Anlog model
Digital model
D-25
Range
0 - 6 / 0 - 150mm
0 - 200mm
0 - 300mm
D
40
50
64
d
20
25
30
e
0.75
0.75
1
t
3
3
3.8
Neck Caliper
FEATURES
With SPC data output. (Series 573)
Supplied in fitted plastic case.
Technical Data
Accuracy: Refer to the list of specifications
Resolution*: 0.01mm or .0005"/0.01mm
Graduation**: 0.05mm
Display*:
LCD
Length standard*: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed*: Unlimited
Battery*:
SR44 (1 pc.), 938882
Battery life*: Approx. 3.5 years under normal use
573-752
536-152
SPECIFICATIONS
Metric
Digital model
Order No.
573-651
573-652*
Range
0 - 150mm
0 - 150mm
Accuracy
0.03mm
0.03mm
Resolution
0.01mm
0.01mm
Mass (g)
157
157
Inch/Metric
Digital model
Range
Order No.
Accuracy
0 - 6" / 0 - 150mm 573-751
.0015"
0 - 6" / 0 - 150mm 573-752*
.0015"
Resolution
Mass (g)
.0005 / 0.01mm 157
.0005 / 0.01mm 157
Metric
Order No.
536-151
536-152*
Range
0 - 150mm
0 - 150mm
Accuracy
0.05mm
0.05mm
Graduation
0.05mm
0.05mm
Mass (g)
140
140
DIMENSIONS
28.5
40
33.5
35
Unit: mm
536-151
573-651, 751
5
38
40
2.4
0.5
33.5
5
10
D-26
60
0.5
2.4
FEATURES
573-761
536-161
SPECIFICATIONS
Metric
Range
0 - 150mm
Digital model
Order No.
573-661
Accuracy
0.05mm
Resolution
0.01mm
Mass(g)
167
Inch/Metric
Digital model
Range
Order No.
Accuracy
0 - 6" / 0 - 150mm 573-761
.002"
Resolution
Mass(g)
.0005" / 0.01mm 167
Metric
Range
0 - 150mm
Order No.
536-161
Accuracy
0.05mm
Graduation
0.05mm
Mass(g)
150
16
229
(32)
40
i>
Mass: 150g
Vernier model
3
Digital model
40
32
56
16
235
D-27
Technical Data
573-191-30
SPECIFICATIONS
Function
Metric
Order No.
573-191-30
Range
0 - 180mm
Accuracy
0.05mm
Resolution
0.01mm
Mass (g)
253
Optional Accessories
Inch/Metric
Range
Order No. Accuracy Resolution
Mass (g)
0 - 7" / 0 - 180mm 573-291-30 .002"
.0005 / 0.01mm 253
959143:
959149:
959150:
299
40
Unit: mm
26
40
69
43
16
3.5
Measurement procedures
6
A consistently low
measuring force can
be guaranteed by only
taking measurements
when the pointer is
between the two fiducial
lines.
Technical Data
573-282-30
SPECIFICATIONS
Metric
Range
0 - 100mm
0 - 150mm
Order No.
573-181-30
573-182-30
Accuracy
0.02mm
0.02mm
Resolution
0.01mm
0.01mm
Mass (g)
213
233
Inch/Metric
Range
Order No.
0 - 4 / 0 - 100mm 573-281-30
0 - 6" / 0 - 150mm 573-282-30
Accuracy Resolution
Mass (g)
.001"
.0005 / 0.01mm 213
.001"
.0005 / 0.01mm 233
Unit: mm
26
B
D
27.5
D-28
573-182-30aNTD31-15AX
Range
0 - 100mm
0 - 150mm
L
233
290
a
40
50
b
c
d
21
16.5 16
24.5 20
16
Mass (g)
213
233
Function
Origin-set, Zero-setting, Power On/Off, Data output,
inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
Optional Accessories
959143:
959149:
959150:
Scribing Caliper
FEATURES
Technical Data
Accuracy: Refer to the list of specifications
Display:
LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery:
SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
573-676
Function
Origin-set, Zero-setting, Power On/Off, Data output,
inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
SPECIFICATIONS
Metric
Range
0 - 150mm
0 - 200mm
0 - 300mm
Digital model
Order No.
573-676
573-677
573-679
Metric
Vernier type
Range
0 - 150mm
0 - 200mm
0 - 300mm
Order No.
536-221
536-222
536-223
Accuracy
0.02mm
0.02mm
0.03mm
Resolution
0.01mm
0.01mm
0.01mm
Mass (g)
166
196
345
Accuracy
0.05mm
0.05mm
0.08mm
Graduation
0.05mm
0.05mm
0.05mm
Mass (g)
150
180
355
DIMENSIONS
Unit: mm
L
>
Optional Accessories
Range
0 - 150mm
0 - 200mm
0 - 300mm
L
229
288
403
D-29
a
46
50
64
b
21.5
25
27.5
c
17
20.5
22
d
16
16
20
e
33
43
54
FEATURES
Specially designed for inside measurements
in hard-to-reach places.
Knife-edge type
573-742
Technical Data
536-142
Inside-groove type
573-745
536-145
Point-jaw type
573-746
vii`}ii
536-146
SPECIFICATIONS
Metric
Digital model
Range
10 - 200mm
10 - 160mm
20 - 170mm
Inch/Metric
Range
.4" - 8" / 10-200mm
.4" - 6" / 10-150mm
.8" - 6" / 20-150mm
Order No.
573-642
573-645
573-646
Accuracy
0.05mm
0.05mm
0.03mm
Digital model
Order No.
573-742
573-745
573-746
Remarks
Knife-edge type, Measurable min. hole diameter: 10mm
Inside-groove type, Measurable min. hole diameter: 10mm
Point-jaw type, Measurable min. hole diameter: 20mm
Accuracy
.002"
.002"
.0015"
Remarks
Knife-edge type, Measurable min. hole diameter: .4"
Inside-groove type, Measurable min. hole diameter: .4"
Point-jaw type, Measurable min. hole diameter: .8"
Mass (g)
227
147
157
Mass (g)
227
147
157
Metric
Range
10 - 200mm
10 - 150mm
20 - 150mm
30 - 300mm
70 - 450mm
70 - 600mm
`i}ii
*>i
Order No.
536-142
536-145
536-146
536-147
536-148
536-149
Accuracy
0.12mm
0.05mm
0.05mm
0.08mm
0.10mm
0.12mm
Remarks
Knife-edge type, Measurable min. hole diameter: 10mm
Inside groove type, Measurable min. hole diameter: 10mm
Point jaw type, Measurable min. hole diameter: 20mm
Point jaw type, Measurable min. hole diameter: 30mm
Point jaw type, Measurable min. hole diameter: 70mm
Point jaw type, Measurable min. hole diameter: 70mm
D-30
Mass (g)
210
130
140
370
1,250
1,430
i>
Knife-edge type
290
58
65
70
70
(D)
0.3
8
(H)
0.3
74.5
Mass: 223g
573-642 / 573-742
90.5
Mass: 210g
536-142
16
16
288
Section XX
Section XX
5
(H)
25
35
3
R5
R5
Mass: 143g
573-645 / 573-745
R5
3.5
20
3
(I)
233
Mass: 153g
573-646 / 573-746
Order No.
536-146
536-147
536-148
536-149
Range
150mm
300mm
450mm
600mm
a
229
403
610
750
b
16
20
25
25
c
38
98
145
145
d
31
89
136
136
e
5
5
10
10
f
5
10
25
25
g
2
2
5
5
0.5
60
Mass (g)
140
370
1,250
1,430
D-31
2.4
38
5
40
33.5
(1)
0.5
2.4(5)
60
(d)
16
28.5
R5
20
35
Mass: 130g
536-145
16
233
16
229
MyCAL-Lite
Technical Data
Accuracy: Refer to the list of specifications
Resolution: .001 / 0.1mm
Display:
LCD
Length standard: Electrostatic capacitance type linear
encoder
Max. response speed: 1800mm/s
Battery:
SR44 (1 pc.), 938882
Battery life*: Approx. 2 years under normal use
700-113-10
Function
Zero-setting, Power on/off
inch/mm conversion
Alarm:
Low voltage, Counting value composition error
700-123-10
SPECIFICATIONS
Inch/Metric
Order No.
700-113-10
700-123-10
Range
0 - 6 / 0 - 150mm
0 - 8 / 0 - 200mm
Accuracy
.005 / 0.2mm
.005 / 0.2mm
Mass (g)
150
170
DIMENSIONS
Unit: mm
40
16
16.5
21
231 (287)
( ): 8" Model
D-32
050001
Application for 4, 6 and 8 Vernier,
Dial and Digimatic Calipers, requiring
dimensions over .375.
050018
Application for 12 Vernier, Dial and Digimatic
Calipers requiring dimensions over .5.
SPECIFICATIONS
DIMENSIONS
Description
For 4, 6 and 8 Calipers
For 12 Calipers
C
A
050001
050018
A
.375
.500
B
2.187
2.75
C
.141
.154
FEATURES
For 4, 6, 8, 12 / 100mm, 150mm,
200mm, 300mm, vernier, dial and
digital calipers which have a depth
measuring bar.
050084-10
SPECIFICATIONS
Inch/Metric
Size
3 / 75mm
4 / 100mm
5 / 125mm
Order No.
050083-10
050084-10
050085-10
DIMENSIONS
Size
3 / 75mm
4 / 100mm
5 / 125mm
Depth base
attachment
Unit: mm
>
L
a
25
25
30
t: Base thickness
D-33
b
75
100
125
c
26.5
26.5
28.5
d
13
13
13
e
18.5
18.5
20
t
12
12
14
Calipers
Nomenclature
Vernier Caliper
Screw, gib setting
Gib, slider
Locking screw
Screw, gib pressing
Depth bar
Stopper, slider
Beam
Inside jaws
Outside jaws
LDial Calipers
Main scale
Absolute
Digimatic
Caliper
(1)
40
90
Locking screw
60
70
50
70
30
505-666
60
30
(2)
(2)
0.01mm
80
70
MADE IN JAPAN
40
50
40
Main scale
10
Output connector
Vernier scale
0.01mm
505-666
10
20
10
20
70
0
10
80
80
Slider
5
90
30
Reference surface
Vernier scale
Slider
LVernier
Calipers
Outside
measuring
faces
0
10
Inside
measuring
faces 20
Step measuring faces
Main scale
Thumbwheel
Inside jaws
Graduation
0.05mm
Graduation
4.00 mm
0.75 mm
4.75 mm
Depth bar
Beam
Dial face
0.01mm
Reference surface
LVernier Calipers
Measurement applications
LDial Calipers
(1)
(1)
10
0
10
20
0
30
2
40
5
50
7
60
30
2
40
5
50
7
60
70
(1)
90
(2)
0.01mm
505-666
10
60
50
80
Main scale
50
70
40
Dial face
0.05mm
MADE IN JAPAN
Main scale
Vernier scale
Graduation
4. Depth measurement
30
505-666
60
70
(2)
0.01mm
70
30
3. Step measurement
20
10
(2)
40
2. Inside measurement
10
80
20
70
(2)
80
10
70
10
90
20
1. Outside measurement
Graduation
0.01mm
16
mm
0.15 mm
16.15 mm
16
mm
0.13 mm
16.13 mm
Note) Above left, 0.15 mm (2) is read at the position where a main scale graduation line corresponds with a vernier
graduation line.
Depth type
90
10
20
30
40
50
60
70
D-34
Standard
Inside me
Measurem
30
505-666
10
60
10
20
0.01mm
70
0
C-type
10
80
0
MADE IN JAPAN
50
70
80
40
ve
Vernier scale
Steel rules are commonly used to roughly measure large workpieces, but if
more accuracy is needed, then a long caliper is suitable for the job. A long
caliper is convenient for its user friendliness but does require some care during
use. In the first place it is important to realize there is no relationship between
resolution and accuracy. For details, refer to the values in our catalog.
Resolution is constant whereas the accuracy obtainable varies dramatically
according to how the caliper is used.
The measuring method with this instrument is a concern since distortion of
the main beam causes a large amount of the measurement error, so accuracy
will vary greatly depending on the method used for supporting the caliper at
the time. Also, be careful not to use too much measuring force when using
the outside measuring faces as they are furthest away from the main beam so
potential errors will be at a maximum here. This precaution is also necessary
when using the tips of the outside measuring faces of a long-jaw caliper.
A
(1) 0.1mm
Structural error (d) occurs when you measure the internal diameter of a small hole.
(2) Aligned
0.1mm
10
20
40
30
40
8 10
50
10
5
0
19mm
60
0.05mm
0
t1
Some early calipers divided 19 divisions on the main scale by 20 vernier divisions
to provide 0.05mm resolution. However, the closely spaced lines proved difficult
to read and so, since the 1970s, a long vernier scale that uses 39 main scale
divisions to spread the lines is generally used instead, as shown below.
C t2
6
2
20
7
4
70
8
6
9 10
30
0.05mm
8 10
39mm
19
Calipers were made that gave an even finer resolution of 0.02mm. These
required a 49-division vernier scale dividing 50 main scale divisions. However,
they were difficult to read and are now hard to find since digital calipers with
an easily read display and resolution of 0.01mm appeared.
C-type
CN-type
40
30
40
50
60
d
D
70
D-35