Professional Documents
Culture Documents
FIGURE 10
PCH
PCH
FIGURE 2
FIGURE 2 shows two coils wrapped around a soft iron core. When the current in coil A is
decreasing, determine the direction of the induced current in coil B. Explain your answer.
[4 marks]
PSPM II 2010/2011 NO. 12(C)
12. (c) A 3.0 diameter wire coil with 25 turns and resistance 0.015 is placed coaxially
inside a solenoid. The solenoid with diameter 6 , length 26 and 1000 turns carries a
transient current 14 1.
(i) Calculate the maximum flux passing through the coil. [Ans: = .
]
(ii) Calculate the current induced in the coil. [Ans: = . ]
(iii) What is the effect on the induced current if the coil is slightly stretched? Explain
your answer.
[7 marks]
PSPM II 2011/2012 NO. 4
4. (a) (i)
(ii)
[2 marks]
(b) The plane of a coil of radius 0.20 is parallel to the -plane in a uniform magnetic field.
The magnetic field is 0.40 and in the positive -direction.
(i) Calculate the magnetic flux through the coil. [Ans: = . ]
(ii) The coil is then rotated clockwise about the -axis, such that the normal of the coil
is now 30 with respect to the -axis. Calculate the average induced emf in the coil
if the time taken for the rotation is 0.50 . [Ans: = . ]
[5 marks]
(c) A current of 5.0 flows in a 400 turn solenoid that has a length of 30.0 and crosssectional area of 2.00 104 2 . Calculate
(i) the inductance of the solenoid. [Ans: = . ]
(ii) the energy stored in the solenoid. [Ans: = . ]
(iii) the induced emf in the solenoid. [Ans: = ]
(iv) the induced emf in the solenoid if the current in the solenoid decreases uniformly
to zero in 0.20 . [Ans: = . ]
[8 marks]
PCH
(iii) What is the induced voltage ratio of the coil to the solenoid? [Ans: = . ]
[8 marks]
PSPM II 2013/2014 NO. 4
4. (a)
FIGURE 5
FIGURE 5 shows a bar moving on rails to the right with a velocity in a uniform magnetic
field directed out of the page. A resistor connects the rails.
(i) What is the direction of induced current in resistor ? Explain your answer.
(ii) State TWO ways to increase the induced current with fixed.
[5 marks]
(b) A rectangular coil of 60 turns, dimensions 0.1 0.1 and total resistance 10 , rotates
with angular speed 30 1 about the -axis in a 1.5 magnetic field directed along the axis. Calculate the
(i) maximum induced emf in the coil. [Ans: = ]
(ii) maximum rate of change of magnetic flux through the coil. [Ans: ( )
=
. ]
[6 marks]
(c) Two coaxial solenoids, P and Q have 400 and 700 turns respectively. A current of 3.5 in
coil P produces an average flux of 300 through each turn of P and average flux of
90 through each turn of Q. Calculate the
PCH
(ii) rate at which current must change for it to produce an induced emf of 50 . [Ans: =
. ]
[4 marks]
(d) Two coaxial coils are wound around the same cylindrical core. The primary coil has 350
turns and the secondary coil has 200 turns. When the current in the primary coil is 6.5 , the
average flux through each turn of the secondary coil is 0.018 . Calculate the
(i) mutual inductance of the pair of coils. [Ans: = . ]
(ii) average flux through each turn of the primary coil when the current in the secondary coil is
1.5 . [Ans: = . ]
[3 marks]
PCH