Professional Documents
Culture Documents
asifmanzoor475@gmail.com
Cell # +966-58-1909808
Profile
Civil Engineer with broad experience in construction field especially in construction of buildings, Bridges
& Roads. Direct experience in Structural work & finishing of buildings like villas, hotels & apartments.
Civil Engineer with broad experience in structure work as a Quality control Engineer
Qualification
B.E Civil EngineeringCGPA 3.53/4 (University of Engineering & Technology, Taxila)
Registered with Pakistan Engineering Council
Registered with Saudi Engineering Council
2014
Professional Experience
Azmeel Contracting Company Jubail KSA Apr 2016 To Date
Client:Saudi Aramco Consultant: AECOM Arabia Co
Site Engineer
Procurement & construction of 491 villas of 3 types & 3 villas of Duplex type for Imam &Muazzin,3 local day
mosques using isolated footings framed infrastructure infill with CMU.
Responsibilities
Supervising all the structural work (Foundation, columns. Beams,Pre-cast Slabs), the finishing work (block
works, Plastering works, Floor tiling works, Gypsum false ceiling works, Spray plaster works, Glass & Aluminum
works, MEP Sanitary fittings, Partition works, Kitchen cabinets, Hand rails and stair cases, Doors fixing,
Interlock)& Plumbing work.
Supervising all the shuttering work, steel work, & concrete pouring activities.
Ensuring that the work is performed in accordance with the specifications& drawings.
Verifying that the quality policy of the company is being fully implemented and maintained.
Assigning the duties to assistant engineers & checking the reports &targets given.
Check and review as constructed quantities of subcontractors and prepare accomplishment reports.
Coordinating with electro mechanical and Implementation companies and adaptation work.
Direct Reporting to Manager & discuss issues in weekly & monthly meetings.
Preparation of daily, weekly & monthly progress report& coordinated regarding inspections.
Construction of Metro Bus System of 17.6km which includes 12km flyover portion and 5.6km at grade
portion.
Responsibilities
Supervision of all A-1 By Pass (Interchange) Bored Piles, Sonic logging test, Pile integrity test, Pile dynamic
test, Spread Footing, Pile Cap, Stem, Pier head, Preparation of Pre-Stressed Girder Stock Yard, Bearing Plinth,
Girder Erection, Intermediate Cross beam construction, Continuous Cross beam Construction, Post tension Deck
Slab, N.J.B , Drains.
Monitoring of project schedule, coordination with contractor & Consultant. Prepare daily activity record.
Was appointed as a Project engineer with a team of trainee Engineers, Assistant Engineers &
supervisors.
Achieved the given tasks & goals in time with quality work.
Ensured that the work was performed in accordance with the specifications drawings.
Verifying that the quality policy of the company is being fully implemented and maintained.
Assigning of tasks to assistant engineers at site on daily basis and review outcome of given tasks&manage the
site with machinery and labors.
Coordinate with clients representatives.
Coordinate all inspections with consultants site inspectors and ARE.
Ensure that during execution of job all necessary safety measures are taken.
Reported to the Project manager regarding technical problems or modifications.
Prepared and updated plan equipment requirements for construction.
Assisted thePlanning Department to Compile Daily Progress reports.
Construction of 2 vehicle bridges of 30m, 01 Pedestrian Bridge, 2 Pre-stressed Bridges of 30m across the canal , 2
Railway bridges at outfall Channel & 8km metaled roads along the canal..
Responsibilities
Site inspections related to concrete, steel, formwork Following ITPs for inspection points.
Implementation of PQAP, Procedures & company policy regarding quality at site.
Project Drawings, PQAP & specification study for the implementation at site.
Study of applicable codes & standard.
Ensured that all testing and measuring instruments were calibrated as per standards, requirements & maintained
with Construction Project
Ensured that Non-Conformance Report (NCRs) were raised once if the activities deviated from the Contract
Specifications or normal construction industry practices.
Material testing of coarse & fine aggregate, FDTs at site.
Testing of fresh Concrete & Inspection of control points with Client.
Discussion with client of any site related issue according to PQAP.
Trainings
Academic Projects
Analysis of different hydraulics parameters on the structural design of DhamrahNullah Bridge Taxila
Technical Skills
Sound knowledge of Computer Skills
Computer Skills:
Engineering Applications:
AutoCAD- (Advanced Skills),ETAB, SAFE,CSI Bridge Design, Risa2D .
Graphics Applications:
Adobe Photoshop(skills).
Miscellaneous Software:-MS-Office ( Word, Excel, Power point), internet utilities (good skills).
Communication and presentation, Strong organizational, Management and planning skills.
Ability to explore and learn more technologies & good communication skills.
Languages
English
Computer Skills
:
:
Excellent
Excellent
Interests
Reading:
Sports:
Traveling:
Photography:
Personal Information
Marital Status:
Nationality:
Driving:
Single
Pakistani
Yes
Religion:
Islam