You are on page 1of 681

@A318/A319/A320/A321

SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51

MANDATORY MANDATORY MANDATORY


ATA SYSTEM: 32

TITLE:

LANDING GEAR - EXTENSION AND RETRACTION - INTRODUCE


POWER INTERRUPT PROTECTION CIRCUIT FOR LGCIUS

MODIFICATION No.:

37866J2818

This page transmits Revision No.09 of Service Bulletin No.A320-32-1346


ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
However, ADDITIONAL WORK No. 02 introduced by Revision No. 05 must be accomplished by aircraft
in Config. 002, 003, 004, 005 and 015 of this Service Bulletin modified at Revision No. 04 and any
previous issue.
The ADDITIONAL WORK No. 02 for this Service Bulletin has been issued to replace the placard PN
D11311600A00 by the placard PN D11312197A00 of the Kit 321346A03.
REASON
Revision No. 09 issued to modify the note concerning the connection of the wire No. 3231-0487 to relay
53GA.
CHANGES
The main changes of this revision are:
-

The note concerning the connection of the wire No. 3231-0487 to relay 53GA modified

Effectivity updated

PUBLICATION AFFECTED paragraph modified (MMEL impacted)

Introduction of new PN E0217XUU001A2 for the 62GA

ACCOMPLISHMENT INSTRUCTIONS D. TEST paragraph modified, overhead panel 35GU


updated to overhead panel 35VU

Minor changes applied.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

FRONT MATTER
LANDING GEAR - EXTENSION AND
RETRACTION - INTRODUCE POWER
INTERRUPT PROTECTION CIRCUIT
FOR LGCIUS
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
GENERAL EVALUATION
MATERIAL PRICE INFORMATION

EFFECTIVITY
APPENDICES
PLANNING INFORMATION
EFFECTIVITY

CONFIGURATION UPDATED

REASON UPDATED

GENERAL EVALUATION TABLE UPDATED


MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
MATERIAL PRICE INFORMATION TABLE
UPDATED
OPERATOR LIST UPDATED
APPENDICES UPDATED

R
R

EFFECTIVITY RELATED INFORMATION


UPDATED

CONFIGURATION DEFINITION UPDATED


CONFIGURATION DEFINITION UPDATED
CONFIGURATION DEFINITION UPDATED
CONFIGURATION DEFINITION UPDATED
CONFIGURATION DEFINITION UPDATED
MATERIAL EFFECTIVITY UPDATED
MATERIAL SET UPDATED

R
R
R
R
R
R

R
R
R
R
R
R
R
R
R
R
R
R
R
R

Configuration definition
CONF 002
CONF 004
CONF 005
CONF 007
CONF 010
Material Effectivity

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 2
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
MATERIAL
REASON
Operational/Maintenance
Consequences

R
R
R
R
R
R
R

OPERATIONAL/MAINTENANCE CONSEQUENCES R
UPDATED

MANPOWER

MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
MANPOWER UPDATED
WEIGHT AND BALANCE UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCED DOCUMENTATION UPDATED
PUBLICATIONS AFFECTED UPDATED
SPARES UPDATED

WEIGHT AND BALANCE


REFERENCES

PUBLICATION AFFECTED
SPARES

EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED
EFFECTIVITY UPDATED
SET UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 3
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
Procurement Addresses
PROCUREMENT ADDRESSES UPDATED
MATERIAL SET UPDATED
Price and Availability
PRICE AND AVAILABILITY UPDATED
MATERIAL SET UPDATED
INDUSTRY SUPPORT INFORMATION
INDUSTRY SUPPORT INFORMATION UPDATED
LIST OF COMPONENTS
LIST OF COMPONENTS UPDATED
Kit 321346A01R03
PART MATERIAL SET UPDATED
MATERIAL SET LABEL UPDATED
PART NUMBER UPDATED
ACCOMPLISHMENT INSTRUCTIONS
TASK 321346- 831-897-001-Modification
TASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
Subtask 321346-910-001-001
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED

DATE: Dec 04/08

R
R
R
R
R

R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 4
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-910-001-001

Subtask 321346-910-001-001

Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-941-001-001
Subtask 321346-831-001-001
Subtask 321346-831-002-002
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001

SUBTASK SOLUTION UPDATED


REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
REFERENCES UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R

R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 5
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-002
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-002
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-002
Subtask 321346-831-003-002

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001

SUBTASK SOLUTION UPDATED


MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED

DATE: Dec 04/08

R
R
R
R
R
R

R
R
R
R
R
R
R
R
R
R

R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 6
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-002
Subtask 321346-831-003-002

Subtask 321346-831-004-001
Subtask 321346-831-005-002
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-003
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001

SUBTASK SOLUTION UPDATED


MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED

DATE: Dec 04/08

R
R
R
R

R
R
R
R
R
R
R
R
R
R

R
R
R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 7
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-002-003
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-002
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-004
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-005

SUBTASK SOLUTION UPDATED


MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED

DATE: Dec 04/08

R
R

R
R
R
R
R
R
R
R
R
R

R
R
R
R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 8
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-006
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-007
Subtask 321346-831-003-001

SUBTASK SOLUTION UPDATED


PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R
R
R

R
R
R
R
R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 9
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-008
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-001
Subtask 321346-831-002-009
Subtask 321346-831-003-001

Subtask 321346-831-004-001
Subtask 321346-831-005-001

SUBTASK SOLUTION UPDATED


MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R
R
R

R
R
R
R
R
R
R
R
R
R

R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 10
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-001
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-831-001-002
Subtask 321346-831-002-002
Subtask 321346-831-003-002

Subtask 321346-831-004-001
Subtask 321346-831-005-004
Subtask 321346-831-006-001
Subtask 321346-831-007-001
Subtask 321346-831-008-002
Subtask 321346-831-009-001
Subtask 321346-831-010-001
Subtask 321346-720-401-001
Subtask 321346-720-404-001
Subtask 321346-720-401-001
Subtask 321346-720-404-001
Subtask 321346-720-401-001
Subtask 321346-720-404-001
Subtask 321346-720-401-001
Subtask 321346-720-404-001

SUBTASK SOLUTION UPDATED


MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PART NUMBER UPDATED
MATERIAL LIST UPDATED
NOTE UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
MATERIAL LIST UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED
SUBTASK SOLUTION UPDATED
PANEL UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R

R
R
R
R
R
R
R
R
R
R
R
R
R
R
R

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 11
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-720-401-001

SUBTASK SOLUTION UPDATED


PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-401-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
Subtask 321346-720-404-001
SUBTASK SOLUTION UPDATED
PANEL UPDATED
TASK 321346- 831-898-001-Modification - TASK SOLUTION UPDATED
Additional Work No. 01 (Introduced by
NOTE UPDATED
Revision No. 01)
Subtask 321346-941-003-001
Subtask 321346-941-003-001
Subtask 321346-941-003-001
Subtask 321346-941-003-001
Subtask 321346-941-003-001

SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED

DATE: Dec 04/08

R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R

UPDATED

UPDATED

UPDATED

UPDATED

UPDATED

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 12
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

Subtask 321346-941-003-001

SUBTASK SOLUTION UPDATED


NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
Subtask 321346-941-003-001
SUBTASK SOLUTION UPDATED
NOTE UPDATED
TASK 321346- 831-899-001-Modification - TASK SOLUTION UPDATED
Additional Work No. 02 (Introduced by
NOTE UPDATED
Revision No. 05) (Applicable for Configs.
002 thru 005 and Config. 015)
Subtask 321346-941-004-001
Subtask 321346-941-004-001
Subtask 321346-941-004-001
Subtask 321346-941-004-001
Subtask 321346-941-004-001

SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED
SUBTASK SOLUTION
NOTE UPDATED

R
R
R
R
R
R
R
R
R

UPDATED

UPDATED

UPDATED

UPDATED

UPDATED

Appendix 02 - Manpower Gantt Chart


Fig. A-FXXAA

FIGURE SOLUTION UPDATED

Fig. A-FXXAB

FIGURE SOLUTION UPDATED

FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision 01 has been issued to:
change the Industry Support paragraph
add Config. 15
replace P/N D9251719400195 by D9251719400095 for the LGCIU plate in Kit 321346A01R01,
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 13
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
add ADDITIONAL WORK for aircraft which have accomplished this Service Bulletin at Rev. 00 (reidentification of the LGCIU plate, Reidentified part set REIDA01)
update the effectivity.
This Service Bulletin has been validated on A320 aircraft MSN 2760.
The opportunity has also been taken to include changes to the test procedures that were found
necessary following the validation of the Service Bulletin on MSN 2760.
Revision 02 is issued to revise the Kit 321346A01R02.
Revision 03 is issued to correct configuration numbers and refresh the effectivity.
Revision 04 issued to:
update the effectivity of the Service Bulletin by removing Config. 001 (aircraft no longer in service)
update the test procedure
add module FIN 654VG (P/N E0425A2001) on Shelf 94VU.
Revision No. 05 issued to:
update the test procedure for the Test of Battery Relief Relay 60GA
update the test procedure for the Test of System 2 Battery Relief Relay 61GA
replace the new PN D11311600A00 by the PN D11312197A00 in the Kit 321346A03
add Additional work for aircraft in Configs. 002 thru 006 and Config. 015 modified by any previous issue
and to add the Skit 321346A03S01
take into account that 679VG can be already installed on aircraft
add a note at the end of paragraph configuration definition.
The opportunity is taken to update the effectivity.
Revision No. 06 issued to:
update the effectivity
correct the Electrical Load Data
correct AMM references
add Config. 016 and modify Config. 015 for aircraft Post Mod. 20079K0061 (to connect the wire
3231-0530 position 1019VN where the 1037VN is located)
Config 006 is removed due to all aircraft in this config. being removed from service
apply minor changes.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 14
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Revision No. 07 issued to update the effectivity.
Revision No. 08 issued to delete COMPA02 and modify the note concerning the connection of the wire
No. 3231-0487 to relay 53GA.
REVISION SEQUENCE
ORIGINAL: Dec 04/08
REVISION No. : 01 - Oct 27/09
REVISION No. : 02 - Nov 04/09
REVISION No. : 03 - Jan 07/10
REVISION No. : 04 - Apr 22/11
REVISION No. : 05 - Jan 13/12
REVISION No. : 06 - Jan 12/15
REVISION No. : 07 - Feb 10/15
REVISION No. : 08 - Nov 18/15
REVISION No. : 09 - Nov 04/16

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 15
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET

This Page Intentionally Left Blank

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 16
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
This summary is for information only and is not approved for modification of the aircraft.

MANDATORY MANDATORY MANDATORY


ATA SYSTEM: 32

TITLE:

LANDING GEAR - EXTENSION AND RETRACTION - INTRODUCE


POWER INTERRUPT PROTECTION CIRCUIT FOR LGCIUS

**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
MINOR
NOTE:

37866J2818
None
As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.

REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Uncommanded Nose Landing Gear (NLG) retraction can occur when there is a dormant seal failure in
the Landing Gear Retract Valve (causing retraction pressure to be applied to the gear) and a Landing
Gear Control and Interface Unit (LGCIU) power interrupt occurs. Under normal circumstances the NLG
is held in the downlock position by the doors closed hydraulic pressure to the NLG downlock actuator.
In the failure condition, doors closed pressure might be lost if the LGCIU suffers a power supply
interrupt longer than 3mSec, thus allowing, under certain circumstances, the dormant seal failure to
retract the NLG.
This Service Bulletin provides a power interrupt protection for the LGCIU(s) using diodes (Power Supply
De-coupling Unit (PSDU)) to split the LGCIU 28V supply between the transformer rectifiers and the
batteries. This will enable the battery bus 7PP to supply LGCIU(s) in the event of an interrupt on the
normal LGCIU supply. A time delay relay will also be installed so that the battery cannot be drained.
The safety valve relay (pre mod 48GA) will be changed from a normal type to a 1 second delay on
energization (post mod 62GA). This one-second delay will give the LGCIU time to power up and
energise the doors closed valve.
Accomplishment of this modification will ensure the door closed pressure remains, and thus downlock
pressure, even in the case of LGCIU power interrupt. The LG safety valve 49GA will be controlled by a
1 second time delay relay 62GA to allow time for the LGCIU(s) to power up. The LG leg extension will
be delayed by one second due to the delay relay 62GA.
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in "PLANNING INFORMATION".
This Service Bulletin has an impact on flight operations documentation; refer to AirbusWorld to consult
the available Modification Operational Impact (MOI).
GENERAL EVALUATION

COMPLIANCE

EVALUATION TABLE
MANDATORY (1)
CANCELS INSPECTION SB

NO

POTENTIAL AD
RELIABILITY AFFECTED
COST SAVING
STRUCTURAL LIFE EXTN
VALIDATION ON AIRCRAFT

YES
NO
NO
NO
YES

NO
NO
NO
NO
NO

A/C OPERATION AFFECTED


PAX COMFORT AFFECTED
ETOPS AFFECTED
VENDOR SB INVOLVED
BOOKLET AVAILABLE

NOTE (1):

Service Bulletin must be accomplished.

NOTE:

This Service Bulletin has been validated on A320 aircraft with Manufacturer Serial
Number (MSN) 2760.

MATERIAL PRICE INFORMATION


**CONF 002

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
MAIN PARTS
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners

Kit 321346A03R01
Supplementary kit
321346A03S01
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
186.00

83.60
9,729.60

Bundle

See SB

Module

Placard
Placard, Button

**CONF 003

MATERIAL SET

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)

Kit 321346A01R03

9,290.00

Kit 321346A03R01
Supplementary kit
321346A03S01
Kit 321346A11R00
TOTAL

1
1

170.00
186.00

83.60
9,729.60

DATE: Dec 04/08

MAIN PARTS

Bundle, placard set, LGCIU plate, C/B,


relay, fasteners
Placard
Placard, Button
Bundle

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 2
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY

MATERIAL SET
Component COMPA01

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)
1
See SB
Module

MAIN PARTS

**CONF 004

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


MAIN PARTS
QTY PER PRICE PER
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners

Kit 321346A03R01
Supplementary kit
321346A03S01
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
186.00

83.60
9,729.60
See SB

Placard
Placard, Button
Bundle
Module

**CONF 005

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
MAIN PARTS
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners

Kit 321346A03R01
Supplementary kit
321346A03S01
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
186.00

83.60
9,729.60
See SB

Placard
Placard, Button
Bundle
Module

**CONF 007

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
MAIN PARTS
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners
1
1

Kit 321346A04R00
Kit 321346A11R00
TOTAL
Component COMPA01

DATE: Dec 04/08

170.00
83.60
9,543.60
See SB

Placard
Bundle
Module

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 3
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
**CONF 008

MATERIAL SET

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)

MAIN PARTS

Kit 321346A01R03

9,290.00

Bundle, placard set, LGCIU plate, C/B,


relay, fasteners

Kit 321346A04R00
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
83.60
9,543.60

Placard
Bundle

See SB

Module

**CONF 009

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


MAIN PARTS
QTY PER PRICE PER
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners
1
1

Kit 321346A05R00
Kit 321346A11R00
TOTAL
Component COMPA01

170.00
83.60
9,543.60
See SB

Placard
Bundle
Module

**CONF 010

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
MAIN PARTS
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners

Kit 321346A06R00
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
83.60
9,543.60

Placard
Bundle

See SB

Module

**CONF 011

MATERIAL SET

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)

MAIN PARTS

Kit 321346A01R03

9,290.00

Bundle, placard set, LGCIU plate, C/B,


relay, fasteners

Kit 321346A07R00
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
83.60
9,543.60
See SB

Placard
Bundle

DATE: Dec 04/08

Module
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 4
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
**CONF 012

MATERIAL SET

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)

MAIN PARTS

Kit 321346A01R03

9,290.00

Bundle, placard set, LGCIU plate, C/B,


relay, fasteners

Kit 321346A08R00
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
83.60
9,543.60

Placard
Bundle

See SB

Module

**CONF 013

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


MAIN PARTS
QTY PER PRICE PER
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners
1
1

Kit 321346A09R00
Kit 321346A11R00
TOTAL
Component COMPA01

170.00
83.60
9,543.60
See SB

Placard
Bundle
Module

**CONF 014

MATERIAL SET
Kit 321346A01R03

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
MAIN PARTS
A/C
A/C (USD)
1
9,290.00
Bundle, placard set, LGCIU plate, C/B,
relay, fasteners

Kit 321346A10R00
Kit 321346A11R00
TOTAL
Component COMPA01

1
1

170.00
83.60
9,543.60

Placard
Bundle

See SB

Module

**CONF 015

MATERIAL SET

MATERIAL PRICE INFORMATION TABLE


QTY PER PRICE PER
A/C
A/C (USD)

MAIN PARTS

Kit 321346A01R03

9,290.00

Kit 321346A03R01
Supplementary kit
321346A03S01
Kit 321346A11R00

1
1

170.00
186.00

Placard
Placard, Button

83.60

Bundle

DATE: Dec 04/08

Bundle, placard set, LGCIU plate, C/B,


relay, fasteners

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 5
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
MATERIAL PRICE INFORMATION TABLE
QTY PER PRICE PER
A/C
A/C (USD)

MATERIAL SET
TOTAL
Component COMPA01

9,729.60
See SB

MAIN PARTS

Module

EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
03Q
40S
76W
98X
AIC
AUH
BGF
CFG
DNU
EZY
GBB
HRM
IZG
KZR
LWA
MYX
ONE
RCT
SFW
TAE
UEA
VVC

13Y
41N
78X
AAF
AIJ
AVA
BGH
CQH
DQA
F2I
GCA
HVN
JAD
LAN
LZB
NIA
ORF
RFJ
SGD
TAI
UJX
WHT

15T
41S
81P
AAR
ALK
AVJ
BHP
CQN
DRK
FCB
GCR
HYP
JAV
LBT
MAU
NKS
OTF
RJA
SHU
TAM
USA
WRC

17S
45O
82U
AAW
AMC
AWC
BIE
CSA
DTR
FFT
GHT
I2L
JBU
LFO
MEA
NLY
OZW
RJD
SKU
TAP
VAR
WZZ

19V
46U
83O
AAY
AMU
AWW
BKP
CSC
DWI
FHY
GLG
I2T
JBW
LIM
MLD
NMA
PAL
ROT
SLK
TAR
VIM

23R
47P
83Q
ABL
ANA
AXM
BSX
CSN
EAA
FIA
GMI
IBE
JSA
LKE
MLR
NMB
PIA
RYW
SNX
TBZ
VIV

28M
48O
85T
ACA
ANR
AZA
BTN
CSZ
EDW
FIN
GOW
IBS
JST
LLC
MMA
NVD
PIC
RZO
SOL
TCW
VJC

29S
52T
86P
ACI
ANZ
AZI
BUC
CTN
EIN
FJW
GSW
IGO
KAC
LLM
MON
NVR
PTI
SAA
SUD
TCX
VKG

31V
56O
86Z
ADR
ART
B2V
CBJ
CTV
ELB
FLI
GWI
IND
KHO
LLP
MOV
NWS
QAF
SAI
SVR
TDR
VLG

32Q
61W
87Q
AEE
ARU
BAW
CCA
DAL
ETD
FRN
GZQ
IRA
KHV
LLX
MRJ
OAW
QSM
SAS
SVW
TGW
VOE

36R
69X
89Q
AFL
ASL
BEC
CCM
DAT
ETJ
FTZ
HDA
IRC
KKK
LMJ
MSC
OHY
QTR
SBI
SWM
THY
VOI

38W
73W
95V
AFR
ATR
BEL
CEB
DKH
EVA
G8E
HFY
IRM
KNE
LMU
MSR
OLY
RBA
SDM
SWR
TNA
VRD

40N
74T
98W
AHY
AUA
BER
CES
DLH
EVJ
GAP
HKE
ISS
KPM
LUR
MXA
OMS
RBG
SEY
SYR
UAL
VRE

CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
OEB
AOT
SIL
ISI
LINE MAINTENANCE AFFECTED
LIFE LIMIT
OTHER

32.31.00.009
None
None
None
None
No
None
TEM 32-30-00 MPD 32-30-00

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 6
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
NATURE OF THE WORK
AIRCRAFT
EQUIPMENT
HARD
SOFT
OBRM

YES
NO
NO
NO
NO

MANPOWER
**CONF 002

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 003
Task 321346-831-897-001: Modification
TOTAL MANHOURS
48.00
ELAPSED TIME (HOURS)
35.50
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 004

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 7
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 005

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 007
Task 321346-831-897-001: Modification
TOTAL MANHOURS
48.00
ELAPSED TIME (HOURS)
35.50
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 008

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 8
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 009

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 010
Task 321346-831-897-001: Modification
TOTAL MANHOURS
48.00
ELAPSED TIME (HOURS)
35.50
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 011

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 9
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 012

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 013
Task 321346-831-897-001: Modification
TOTAL MANHOURS
48.00
ELAPSED TIME (HOURS)
35.50
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 014

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


48.00
35.50

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 10
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 015

TOTAL MANHOURS
ELAPSED TIME (HOURS)

Task 321346-831-897-001: Modification


51.00
38.50

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

APPENDICES
**CONF ALL
Appendix 01 - Configuration Definition Table
Appendix 02 - Manpower Gantt Chart

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 11
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY

**CONF ALL

MODIFICATION OF THE EQUIPMENT


AND THE WIRING IN 121VU

120VU

2M

1M

90V

MODIFICATION OF THE EQUIPMENT


AND THE WIRING IN 93VU

INSTALLATION OF THE
LGCIU PLATE IN 91VU

N_SB_321346_5_SUAA_01_00

Figure A-FSUAA - Sheet 01

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 12
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel : (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51

MANDATORY MANDATORY MANDATORY


ATA SYSTEM: 32

TITLE:

LANDING GEAR - EXTENSION AND RETRACTION - INTRODUCE


POWER INTERRUPT PROTECTION CIRCUIT FOR LGCIUS

MODIFICATION No.:

37866J2818

This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1.

PLANNING INFORMATION

**CONF ALL
A.

EFFECTIVITY
This Service Bulletin has been validated on A320 aircraft MSN 2760.
NOTE:

(1)

Models
318-111
319-131
320-232
321-231

(2)

This modification is embodied before delivery on A318 aircraft MSN 3509,


3606 and subsequent, on A319 aircraft MSN 3491-3513, 3608 and
subsequent, on A320 aircraft MSN 3480-3497, 3503, 3568 and subsequent
and on A321 aircraft MSN 3493-3522, 3612 and subsequent.

318-112
319-132
320-233
321-232

318-122
319-133
321-111

319-111
320-211
321-112

319-113
320-214
321-211

319-114
320-216
321-212

319-115
320-231
321-213

Effectivity by MSN
0029 0045-0046 0049-0057 0059 0064-0073
0104 0110-0113 0115-0119 0121-0127 0135
0152-0154 0157-0162 0164-0166 0168-0169
0194-0195 0197-0198 0200-0203 0205-0211

319-112
320-212
321-131

DATE: Dec 04/08

0076-0078 0081-0087 0093-0094 0099


0137-0138 0140-0142 0148-0150
0171-0175 0178 0181-0183 0185 0192
0213 0216-0220 0224 0229-0232 0234
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

0237 0239
0272-0273
0306-0309
0350-0351
0390 0393
0438-0439
0468 0470
0548-0556
0625 0627
0773-0788
1003-1043
1158-1185
1336-1373
1609-1655
1796-1812
1931-1938
2052-2057
2277-2340
2508-2549
2749-2800
3047-3072
3245-3259
3514-3521
3592-3593
(3)

0242-0244 0248-0249 0251-0256 0259-0260 0262-0263 0265-0269


0275-0277 0279 0281-0282 0284-0285 0287 0289-0298 0300-0303
0311-0312 0314 0316-0322 0324-0325 0328-0332 0339-0343 0345-0347
0353-0362 0364 0366-0368 0370-0373 0376 0378 0380-0383 0385-0388
0395 0398-0410 0412 0414-0418 0420-0424 0426-0432 0434-0436
0441-0442 0444-0445 0447-0450 0452 0454 0456-0458 0460 0462-0466
0472-0477 0479-0480 0482-0491 0493 0495-0514 0516-0535 0537-0546
0558-0587 0589 0591-0593 0595-0600 0603-0604 0607-0614 0616-0623
0629-0631 0633-0662 0664-0673 0675-0706 0709 0711-0752 0754-0771
0790-0798 0800-0898 0900-0909 0911-0955 0957-0977 0979-1001
1045-1052 1054-1067 1069-1073 1075-1097 1099-1112 1114-1156
1187-1211 1213-1217 1219-1255 1257-1277 1279-1304 1306-1332 1334
1375-1463 1465-1467 1469-1484 1486-1555 1557-1588 1590-1607
1657-1659 1661-1675 1677-1697 1699-1726 1728 1730-1767 1769-1794
1814-1821 1823-1829 1831-1879 1881-1907 1909-1918 1920-1929
1940-1984 1986-1990 1993-1998 2000-2016 2018-2024 2026-2050
2059-2110 2112-2127 2129-2191 2193-2217 2219-2262 2264-2275
2342-2420 2422-2423 2425-2439 2441-2486 2488-2499 2501-2506
2551-2591 2593-2649 2651-2674 2676-2705 2707-2721 2723-2747
2802-2836 2838-2920 2922-2940 2942-2948 2950-3037 3039-3045
3074-3084 3086-3091 3093-3109 3111-3132 3134-3162 3164-3242
3261-3355 3357-3479 3499 3501-3502 3505-3506 3508 3510-3511
3523-3541 3543-3567 3569 3571 3573 3575 3578 3580 3583-3590
3595 3600 3602 3604

Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
03Q
13Y
15T
17S
19V
23R
28M
29S
31V
32Q
36R
38W
40N
40S
41N
41S
45O

MSN
0584
0371
0764
3333
0954
1730
0055
0291
0164
1048
1228
1747
1194
0065
1973
3164
0630
3402

0620 0770
1494 2910 3261

0292
0293 0332 0420 0436 0565 0579 0591 0855 0932 0943 0992
1283
1818
0077

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 2
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
46U
47P
48O
52T
56O
61W
69X
73W
74T
76W
78X
81P
82U
83O
83Q
85T
86P
86Z
87Q
89Q
95V
98W
98X
AAF
AAR
AAW
AAY

ABL
ACA

ACI
ADR
AEE
AFL

2906
0619
3362
1599
1285
0112
0219
0087
2165
0140
1081
0308
0279
0316
0477
0234
0913
1706
0052
0427
3379
0434
0551
0639
0802
3224
0706
1347
2427
1227
2732
0059
0174
0277
0634
0721
0800
1623
1811
2152
1000
1428
3316
2106
3157

MSN
2952 2982 3275 3296 3332
3412

0300 0328

0157

0677 0891
0495

1750
0747
0441 0516 0524
2180
1174
3236
0714
1467
2450
1636
2808
0068
0175
0284
0656
0728
0813
1632
1853
3547

2870 3136 3242 3289


1356 1511 2247 2397 2459 3297 3437
0716
1530
2556
1670
2840
0073
0183
0290
0670
0732
0817
1638
1864

0730
1540
2586
1734
2933
0084
0210
0309
0672
0736
0829
1673
1874

0745
1694
2625
1970
2943
0122
0231
0324
0682
0740
0831
1691
1940

1108
2224
2702
2041

1229
2265
2709
2045

1255
2271
2729
2110

1262 1288 1292 1318


2319 2387 2398 2420
2821
2226 2290 2422 2430

0126
0232
0330
0688
0742
0840
1719
1975

0127
0242
0341
0691
0752
0845
1726
2018

0141
0248
0378
0693
0757
1299
1742
2145

0149
0253
0403
0695
0769
1562
1748
3051

1433
3322
2116
3267

1856
3365
2133
3334

1909
3392
2144
3373

1996
3423
2330
3410

2468
3439
2337
3511

2828 3033 3066 3074 3162 3302


3462 3478 3519 3526 3527
2875 2920 2947 2965 3052 3063
3545

DATE: Dec 04/08

0150
0254
0404
0697
0773
1577
1772
3401

0154
0255
0546
0711
0779
1602
1783

0159
0265
0572
0719
0785
1611
1787

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 3
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
AFR

AHY
AIC

AIJ

ALK
AMC
AMU
ANA
ANR
ANZ
ART
ARU
ASL
ATR
AUA

AUH
AVA
AVJ
AWC
AWW
AXM

AZA

AZI
B2V

0237
0625
1190
1502
1879
2140
2918
3420
0331
0045
0486
3300
0169
2930
3514
2345
2189
0631
0115
0671
2085
2663
0244
0573
1140
0314
0552
1387
2262
2403
1634
3518
0368
2564
0597
0667
2656
3018
3291
3521
0513
0951
1722
2869
0527
0185

0239
0637
1201
1505
1894
2317
2938
3441
2516
0046
0490
3305
1132
2964

0287
0777
1216
1524
1900
2344
2951
3470
2588
0049
0499
3326
1162
3021

2584
2291
0908
0383
0726
2090

3397
2332
1758
0482
0765
2112

0359
0582
1159
0373
0570
1458
2416

0533
0805
2277
0393
0581
1478
2494

0498
0796
1267
1616
1924
2350
2961

0509
0985
1271
1622
1938
2456
2967

MSN
0521 0529
1020 1025
1344 1404
1640 1645
1949 2035
2582 2601
2972 3008

0544
1036
1415
1658
2059
2686
3009

0598
1133
1444
1677
2071
2705
3098

0600
1151
1449
1699
2081
2716
3372

2685
0050
2593
3340
1179
3044

2788
0051
2624
3344
1244
3123

2846
0056
2629
3367
1259
3149

2865
0398
3130
3557
1322
3286

2991
0416
3146
3573
1780
3304

3006
0423 0431 0432
3212 3271 3288

2853
0057
2907
3551
1308
3160

0608
1169
1471
1733
2100
2721
3399

0618
1176
1476
1859
2109
2750
3419

2048 2227 2539


3312 3374 3508

2382 2665 2768 3056 3068


1790 1850 1912 1926 1962
0501 0507 0531 0534 0549 0554 0658 0669 0685
2130 2148 2153 2173 2257 2297 2445 2533 2594
0566 0662 0936 0984 1823 1873 2211 2233
2296 2335 2587 2621 2645 3252 3317
0768 0776 0797 0920 0935 1137 1150 1189 1385
1504 1553 1678 1735 1931 1937 2009 2131 2174
2547 2652

2328 2333 2358 2367 2377 2394 2523 2544 2552 2575 3467

2791
0743
2683
3064
3299
3536
0514
0959
1740
2932

0872
2699
3117
3327
3549
0526
1138
1745
2995

DATE: Dec 04/08

0874
2760
3140
3338

1286
2816
3154
3353

2137
2826
3173
3370

2147
2842
3182
3394

2162
2881
3194
3404

2183
2885
3201
3427

2425
2956
3223
3448

2612
2989
3232
3477

2633
3000
3277
3505

0532
1168
1770
3076

0576
1217
1779
3079

0583
1220
2033
3115

0586
1226
2057
3138

0593
1448
2074
3161

0599
1457
2083
3343

0819 0848 0940


1473 1480 1489
2086 2101 2127
3563

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 4
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
BAW

BEC
BEL

BER

BGF
BGH
BHP
BIE
BKP
BSX
BTN
BUC
CBJ
CCA

CCM
CEB
CES

CFG
CQH
CQN
CSA
CSC

1014
1239
1440
1594
1711
1899
2305
2694
3314
3199
1086
1963
2925
1629
2562
3464
3188
0142
2968
0519
2254
2664
0648
1541
0256
2557
0876
2293
2805
3329
3325
2638
0665
1093
1601
2219
2543
3247
0774
2939
0696
3043
0540
2639

1118
1279
1482
1613
1771
1910
2324
2799
3499

1142
1295
1509
1661
1782
1958
2351
2981
3550

MSN
1177 1193
1329 1338
1510 1513
1665 1672
1804 1814
1987 2038
2363 2389
3049 3081

1082
1258
1445
1604
1754
1902
2320
2697
3351

1115
1261
1466
1606
1760
1907
2323
2720
3468

1197
1380
1529
1687
1829
2040
2429
3089

1222
1384
1537
1689
1834
2098
2441
3235

1225
1418
1558
1690
1871
2188
2466
3254

1232
1423
1574
1696
1883
2190
2536
3290

1236
1424
1590
1708
1892
2194
2653
3301

1102
2030
3255
1717
2591
3502

1160 1336 1388 1441 1493 1759 1797 1803 1838 1885
2114 2196 2207 2230 2260 2392 2400 2700 2763 2810

1087
3245
0827
2273
2783
0650
1551

1554 2844 2863 3125 3139


3422 3604

2561
0921
2298
2819
3337

2611
1296
2454
2839
3461

2644
2000
2499
2847
3506

2733
2007
2508
2890
3523

2985
2015
2525
3195

3285
2172
2532
3200

3520
2202
2545
3215

3548
2205
2551
3221

3561
2237
2559
3226

3578
2269
2614
3250

3580
2285
2643
3307

2786
0754
1303
1639
2221
2549
3249
0809
3014
0698
3094
0556
3114

2790
0838
1312
1906
2235
2693
3262
0884
3023
0704
3406
0878
3116

2831
0854
1316
1911
2239
2757
3471
0894

2852
0897
1330
1964
2244
2825
3559
0905

2876
0909
1345
1981
2309
2882
3593
0957

2994
0925
1357
2022
2315
2895

3048
0939
1361
2034
2437
3168

3272
1028
1377
2036
2451
3170

1030
1386
2049
2478
3186

1070
1532
2056
2493
3197

1072
1542
2068
2498
3233

1769 1775 1852 1889 1961 1966 1988 1994 2003 2005
2606 2627 3055 3080 3121 3178 3202 3213 3295 3328
3515 3516 3532 3540

2310 2362 2366 2417 2509 2531 2600 2634 2648 2660
3421 3424 3454

DATE: Dec 04/08

0971 1416 1437 1607

0705
3436 3452
0915 0919 1013 2313 2348 2431 2510 2534 2597
3124 3158 3167 3196 3210 3386 3449 3583

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 5
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
CSN

CSZ
CTN
CTV
DAL

DAT
DKH
DLH

DNU
DQA
DRK
DTR
DWI
EAA
EDW
EIN

ELB
ETD
ETJ
EVA
EVJ

0712
1039
2067
2505
2579
2770
2936
3251
2672
3366
0767
0839
0118
0262
0329
0399
0832
1037
1453
1633
1752
1833
2039
0466
2975
0069
0116
0505
0636
0729
1260
0113
2347
2306
0444
0561
0386
0942
0926
2256
2635
1703
0350
0325
3363
1422

0718
1057
2080
2506
2637
2772
2950
3258
2684
3383
0833
0892
0121
0263
0339
0408
0846
1058
1456
1641
1766
1839
2047
2957
3027
0070
0162
0518
0641
0738
1273
0406
2599
2346
0447

0947
1023
2272
3129

0720
1596
2200
2511
2680
2796
2960
3269
2841
3435
1009
1635
0125
0272
0340
0410
0903
1062
1483
1646
1774
1875
2082

0722
1614
2203
2519
2689
2809
2971
3311
2905
3440
1029
2598
0152
0273
0355
0417
0907
1191
1498
1659
1789
1897
2087

0849
1776
2232
2521
2701
2824
2986
3342
2909
3456
1237
2692
0153
0281
0358
0418
0911
1230
1501
1662
1796
1923
2092

MSN
0859 0881
1788 1971
2354 2361
2530 2541
2708 2713
2834 2855
3020 3067
3459 3552
2935 2973
3528
1252
3147 3148
0160 0171
0282 0297
0360 0367
0766 0778
0923 0962
1249 1324
1520 1535
1683 1685
1800 1810
1959 1976
2095

3234
0071
0172
0560
0651
0744
1337

3268
0072
0202
0563
0652
0853
1365

3368
0078
0412
0564
0679
0860
1367

0083
0458
0567
0689
0875
3265

1951
1242
2364
3318

2024
1394
2374
3345

2134
1443 1983 2001 2191 2206 2217 2250
2399 2409 2411 2432 2486 2542 2583
3501

0086
0468
0595
0692
0887
3339

0895
1974
2371
2546
2714
2861
3075
3566
2980

0900
1986
2408
2554
2741
2877
3112
3587
3131

0950
1995
2426
2555
2743
2899
3144

0966
2004
2435
2558
2759
2901
3217

1035
2008
2484
2574
2767
2915
3241

0192
0298
0372
0786
0964
1325
1543
1693
1812
1982

0197
0306
0380
0801
0981
1346
1549
1709
1815
1990

0206
0307
0381
0807
0988
1392
1567
1714
1820
2002

0208
0318
0387
0818
0996
1414
1570
1738
1824
2013

0213
0319
0388
0830
1011
1434
1582
1746
1828
2026

0093
0473
0609
0694
0901
3360

0094
0474
0610
0699
1080
3387

0104
0484
0616
0700
1161
3434

0110
0493
0623
0717
1188
3592

0111
0502
0627
0723
1214

3132 3153 3206

2102

1026
1094
2294
3174

1947 1955 2167 3004 3050


0428

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 6
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
EZY

F2I

FCB
FFT

FHY
FIA
FIN

FJW
FLI
FRN
FTZ
G8E
GAP
GBB
GCA
GCR
GHT
GLG
GMI
GOW
GSW
GWI

GZQ
HDA
HFY
HKE
HRM
HVN
HYP
I2L
I2T
7

2037
2353
2503
2681
2782
2923
3090
3466
0082
0285
0525
0928
1515
2012
2518
2524
0295
0941
1544
2266
2281
2186
0647
1145
2141
3087
0053
0415
2338
0438
1872
0684
3306
3589
0117
0269
1147
3011
1878
0633
2229
1004
2299
0642
2255
1654
0491
1631

2043
2360
2512
2691
2795
2946
3118
3537
0085
0294
0538
1843
1583
2019
2695
2804

2050
2370
2514
2715
2803
2959
3122
3544
0099
0301
0555
2032
1615
2103
2806
3025

2053
2385
2527
2727
2812
3003
3134
3555
0138
0317
0653
2662
1684
2198
2836

2062
2402
2528
2735
2818
3036
3137
3569
0148
0342
0657

MSN
2120 2170
2412 2463
2538 2565
2742 2744
2827 2829
3041 3053
3176 3184
3571
0168 0203
0347 0422
0724 0758

2181
2471
2578
2754
2854
3059
3411

2184
2477
2605
2765
2860
3061
3413

2245
2481
2636
2769
2866
3082
3426

2289
2492
2646
2777
2873
3084
3432

2300
2495
2677
2779
2884
3088
3442

0220 0230 0243 0249 0251


0449 0460 0488 0496 0497
0787 0793 0976 1010 1846

1781 1786 1806 1860 1943 1980 1997 2010


2209 2236 2258 2287 2318 2406 2448 2483
2857 3205 3389 3431

0961 1073 1107 1184 1185 1241 1309 1352 1364 1405 1470
1588 1712 1913 1916 1978 1989 2065 2124 2146 2154 2208

0660
2176 2268 2308 2891
3187 3273 3310 3455
0054 0064 0076
2475
1882 1925 2078 2126 3408
0970 0995 3019 3407 3533 3560

0135
0346
1155
3128

0137
0382
1170
3172

0161
0401
1172
3193

0200
0646
1209
3352

0201
0654
1277
3358

0209
0794
2607
3375

0216 0217 0218 0267 0268


1016 1077 1084 1089 1136
2628 2632 2813 2833 2976
3534

0756 0784 0812 0930 0993 1024 1253 1695 1721 1984 2021
2238 2428 3369
2322 2717
2261 2267 2974 3005 3013 3022 3198 3315 3355 3600
1679 1753
0668 0734 0760 0816
1682

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 7
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
IBE

IBS
IGO
IND
IRA
IRC
IRM
ISS
IZG
JAD
JAV
JBU

JBW
JSA
JST
KAC
KHO
KHV
KKK
KNE
KPM
KZR
LAN

LBT
LFO
LIM
LKE
LLC
LLM
LLP
7

0158
1516
2242
2897
1047
2143
1767
3457
0343
0303
0354
0550
0737
0376
2764
0029
1123
1452
1861
2075
2231
2386
2640
2880
3190
0445
2316
1195
2608
0181
0311
2084
0604
1390
1866
3361
0357
1042
1304
1903
2886
1121
0659
0828
2581
0883
1054
0739

0173
1572
2264
2996
1059
2248
1920
3541

0207
1655
2270
3078
1067
2357
2108

0224
1674
2311
3209
1099
2381
2204

0266
1681
2365
3320
1101
2563
2275

MSN
0356 0938
1716 1793
2391 2472
3380 3443
1119 1125
2807
2334 2359

0998 1021 1027 1154 1362


1809 1836 2115 2220 2225
2488 2736 2756 2843 2889
1198 1439 1450 1736 2104
2457 2649 3357 3414 3453

0312 0345 0575 0857 2054


0414 0480
0749
0395
3246
0537
1156
1506
1898
2099
2246
2415
2647
2900
3228

0400 0407 0426 0430 0476 0999


2061
1173
1528
1904
2125
2259
2447
2671
2945
3263

1235
1546
1915
2132
2280
2449
2710
2970
3287

1240
1557
1917
2136
2284
2461
2725
2977
3348

1257
1610
1927
2149
2286
2489
2755
2992
3381

1270
1650
1948
2150
2307
2491
2781
3029
3416

1280
1705
2006
2159
2314
2504
2802
3039
3451

1302
1739
2020
2160
2336
2520
2814
3072
3479

1327
1784
2031
2177
2352
2535
2832
3091
3517

2453
2185
2703
2046
0937

2604
2197 2292 2329 2455 2515 2526 2537 2573
2766 2787 3474
2091

0761
1503
2123
3475

0806 0808 0823 0963 0968 0974 1008 1124


1624 1950 1953 2029 2077 2747 2753
2171 2182 2199 2569 2776 3218 3238 3256
3530

1491 1512 1526 1548 1568 1854 1858 1877


2304 2321 2572 2585 2845 2858 2864 2872
3280 3319 3330 3535 3556
2158

2356
1408
2642
0182
0409
2303
0614
1438
1942
3396

2423
2169
2651
0195
0644
2480
0675
1451
1965
3425

1204
1332
2089
2892
1175

3141
1351
2096
2894
1597

1355
2295
3264
1744

2617
0914
1918
1007

2746
0967
1956
1411

3240
0990 1041 1715 2987
1967 1969 1993 2413 2419 2439
1723 2016 2118 2342 2903 2912 3191

DATE: Dec 04/08

1398
1785
2042
2201
2368
2577
2848
3119
3554

1446
1849
2063
2215
2384
2580
2871
3150

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 8
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
LLX
LMJ
LMU
LUR
LWA
LZB
MAU
MEA
MLD
MLR
MMA
MON

MOV
MRJ
MSC
MSR
MXA
MYX
NIA
NKS

NLY
NMA
NMB
NVD
NVR
NWS
OAW
OHY
OLY
OMS
ONE
ORF
OTF
OZW
PAL
PIA
PIC
PTI
QAF
QSM

MSN
2529
1868
0852
0229
2878
2540
1592
1977
0622
1893
0973
0864
1707
3293
2442
0530
2937
0165
2070
0252
0888
2410
2433
2679
2983
2668
1697
3346
0211
2216
1219
1886
0364
0912
0517
3035
3001
2566
1407
0429
3553
2155
2331
1263
0927
0607

2619
0977 1366 1561
2954
2596
1936
2055
0741
1946
1180
0983
1763
3458
2446
1202
2966
0166
2073
0259
1896
2874
2470
2698
3007
2749
1732
3586
0528

3309 3564

2849
2731
1247
1015
1794
3546
3364
1300
3282
0178
2079
0260

3106
1791
1045
1941
3575
3403
1353
3323
0194
2088
0275

3183
2473
2704
3017
2867
1952

3219
2476
2711
3026
2902
2676

1153 1207 1320 1413 1421 1571 1605 1637


2105 2142 2234 2553 2610 2730 2793 3278

0198 0322 0351 0366 0680 0687 0715 0725


2094
0276 0296 0320 0321 0353

2485
2723
3165
3093

2490
2797
3393
3415

2560 2567 2590 2603 2622 2673


2893 2898 2929 2942 2963 2978
3395
3447

0558 0709 0902 1005 1626 1778 1998

1233 1276 2927 3034 3120


0385
0916
0535
3047
3030

0543
2571
0666
3111
3062

0580 0640 0661 0676 0771 0792 0810 0811 0835


2688
1612 2396
3214 3216 3371 3390 3438 3469 3585 3602

1922
2212 2274 2719 2758 2789 2926 2944 3031 3060 3097
2340 2517 2670 2922 3012

0611 0617

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 9
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
QTR
RBA
RBG
RCT
RFJ
RJA
RJD
ROT
RYW
RZO
SAA
SAI
SAS

SBI

SDM

SEY
SFW
SGD
SHU
SKU
SLK
SNX
SOL
SUD
SVR

SVW
SWM
SWR

SYR
TAE
TAI

1487
2288
2135
3152
1017
0814
2953
1618
2931
0569
2011
2326
0542
1183
2856
3335
1071
2028
3070
0649
1851
2879
1944
0994
0424
2052
1400
2548
0969
0289
0302
3040
0735
1720
2343
3100
0421
0520
0603
0782
0886
0934
1066
3057

MSN
1566 1648 1773 1895 1928 1957 2097 2107 2121 2138 2161
3274
2139 2195 3071
2023
3428
2955 3220 3225
2325
2355
0877
1383
2883

2390
2375
1497
1587
2888

1078
2064
3446
1130
1863
2913
1945
1018

1090
2076
3473
1200
1876
3065

2069
1523
3171
2252

2072 2222 2243 3108 3281 3298 3336


2119 2129 2214 2249 2251 2283 2378 2380 2436 2460
3331
2568 2775 3104

2379
2027
1619
2911

2418
2496
1642
2958

2438
2502
1675
2990

2469
3105
1798
3086

2501
3270
1807 1817 1848 2817 2850
3159 3192 3227 3231 3292

1091 1126 1129 1131 1149 1164 1167 1819 1870


2279 2369 2373 2464 2474 2618 2623 2641 2726
1379 1488 1560 1630 1743 1761 1805 1808 1841
1890 2093 2151 2163 2179 2241 2465 2497 2751
3179

0775 0815 0841 0991 1012 1063 1152 1199 1484 1579 1603
1751 1777 1884 1901 1905 2117 2166 2175 2187 2278 2327
2349 2707 2862 2998 3099 3107 3189 3385 3388 3433 3472
0986
0522
0612
0987
0918
0946
1334
3103

1293
0541
0621
1144
1032
0949
1598
3113

DATE: Dec 04/08

0545
0635
1762
1076
1339
1625
3248

0553 0559 0562 0574 0577 0578 0585 0596


0643 0664 0673 0681 0701 0703 0713 0727
1085
1368
2282
3276

1117
1500 1934 2659
2301 2339 2434 2444 2687 2917 3042
3378 3418 3510 3538

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 10
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
TAM

TAP

TAR
TBZ
TCW
TCX
TDR
TGW
THY

TNA
UAL

UEA
UJX

1092
1518
1826
2372
2904
3294
0629
0960
1307
2822
0119
1187
0361
1381
1006
0795
2724
2156
2655
3015
3341
0731
0435
0470
0508
0655
0798
0851
0952
1163
1343
1474
1559
1647
1741
2969
2654
0733

1143
1593
1835
2661
3058
3588
0790
1100
1713

MSN
1158 1215
1595 1628
1837 1855
2734 2737
3156 3180
3595
0821 0837
1106 1120
1718 1756

1096
1575
1827
2393
2924
3313
0750
0979
1399

1103
1580
1831
2467
3002
3391
0755
0982
1667

1139
1591
1832
2513
3032
3565
0763
1034
1668

1246
1652
1857
2784
3211

1251
1692
1888
2838
3222

1376
1801
1891
2859
3229

1459
1802
2014
2887
3266

1486
1825
2044
2896
3284

0123
1479
0362
1402
1238

0124
1700
0405
1929
1250

0205 0370 0390 0402 0511 0869 0880 0958 0975


3096

2728
2164
2738
3126
3350
0746
0439
0472
0510
0678
0804
0858
0955
1192
1359
1475
1569
1649
1755

2395
2739
3142
3382
0791
0442
0475
0512
0683
0820
0862
0965
1211
1363
1477
1573
1653
1821

2401
2823
3185
3405
0822
0450
0479
0523
0686
0824
0865
0980
1243
1401
1495
1581
1664
1840

0870 0906 0917 0933 0945


1127 1165 1181 1206 1231
1765 1799 1816 2178 2792

1954 1968
1881 1887 1921 1972 2060

2404
2868
3207
3429
2376
0452
0483
0539
0690
0825
0867
0989
1248
1409
1507
1584
1669
1842

2414
2916
3208
3525
2914
0454
0485
0568
0702
0826
0871
1001
1266
1420
1508
1585
1671
1845

2452
2919
3239
3539

2522
2928
3257
3558

2602 2609 2626 2631


2934 2984 2999 3010
3259 3283 3303 3308
3567

0456
0487
0571
0748
0834
0873
1022
1272
1426
1514
1586
1680
1847

0457
0489
0587
0751
0836
0882
1031
1282
1427
1522
1600
1688
1865

0462
0500
0589
0759
0842
0893
1104
1290
1432
1533
1609
1702
2667

0463
0503
0592
0780
0843
0898
1105
1291
1435
1538
1617
1728
2815

0464
0504
0613
0783
0847
0944
1128
1321
1460
1545
1620
1731
2940

0465
0506
0638
0788
0850
0948
1146
1341
1469
1555
1627
1737
2948

2696 2762 2774 2820 2835 3024


1213 1663

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 11
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OPERATOR
USA

VAR
VIM
VIV
VJC
VKG
VLG

VOE
VOI
VRD

VRE
VVC
WHT
WRC
WZZ

0066
0890
1033
1064
1112
1203
1275
1314
1354
1395
1447
1519
1576
1844
2630
2383
0879
2157
2712
1932
1171
1914
2761
3145
2113
2657
3450
2616
3101
3445
0067
1306
0548
0645
3127

0448
0896
1038
1065
1114
1205
1281
1315
1358
1397
1455
1521
1621
1935
2669
2718
1060
2210
2745
1960
1208
1933
2785
3151
2122
2666
3463
2674
3135
3460
0081
1370

0762
0904
1040
1069
1116
1223
1284
1317
1360
1403
1462
1525
1643
2193
2690

0803
0922
1043
1075
1122
1224
1287
1319
1369
1406
1463
1527
1644
2302
3584

0844
0924
1046
1079
1134
1234
1289
1323
1371
1410
1465
1531
1651
2312

MSN
0856 0861
0929 0931
1049 1050
1083 1088
1135 1141
1245 1254
1294 1297
1326 1328
1373 1375
1412 1417
1472 1481
1534 1536
1666 1701
2405 2458

0863
0953
1051
1095
1148
1264
1298
1331
1378
1419
1490
1539
1704
2482

0866
0972
1052
1097
1166
1265
1301
1340
1382
1425
1492
1547
1710
2570

0868
0997
1055
1109
1178
1268
1310
1342
1389
1431
1496
1552
1724
2595

0885
1003
1056
1110
1182
1269
1311
1348
1391
1436
1499
1563
1764
2613

0889
1019
1061
1111
1196
1274
1313
1350
1393
1442
1517
1565
1792
2615

1430
2479
3054
3377

1461
2589
3083
3400

1550
2620
3095
3444

1749
2658
3102
3476

1862
2678
3109
3529

2443 2576 2752 2908

1210
1979
2794
3169
2240
2771
3524
2740
3155
3465
1429
1454

1221
2168
2798
3203
2253
2780
3543
2773
3181

1349
2223
2962
3237

1372
2388
2988
3321

1396
2407
3028
3376

2979 2997 3045 3069 3077 3175 3253 3279


3590
2778 2800 2811 2830 2851 2993 3016 3037
3204 3230 3324 3347 3349 3359 3398 3417

2066 2213 2228


1564 1578 1657 1686 1725 1757 1867

0781 1869 2462 2682


3143 3166 3177 3354 3384 3409 3430 3531 3562

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 12
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

Configuration by MSN

0029
0084
0142
0169
0200
0216
0239
0262
0281
0295
0314
0339
0357
0381
0403
0420
0435
0457
0482
0501
0530
0554
0573
0592
0613
0630
0645
0657
0052
0312
0055
0069
0111
0171
0119
0296
0390
0161

0045
0085
0148
0173
0201
0217
0242
0263
0282
0297
0316
0340
0358
0382
0404
0421
0436
0460
0483
0503
0531
0556
0574
0596
0616
0634
0646
0658
0053
0317
0064
0070
0116
0192
0123
0320
0402
0162

0046
0087
0149
0174
0202
0218
0243
0265
0284
0298
0318
0341
0359
0383
0405
0422
0439
0462
0485
0504
0533
0558
0575
0598
0617
0635
0647
0659
0054
0322
0077
0071
0117
0197
0124
0321
0415
0172

0049
0112
0150
0175
0203
0220
0244
0266
0285
0300
0319
0342
0360
0387
0406
0423
0442
0463
0486
0506
0534
0559
0577
0600
0618
0636
0648

0050
0113
0154
0178
0206
0224
0248
0267
0287
0301
0324
0343
0366
0388
0407
0426
0444
0464
0487
0507
0539
0561
0578
0603
0619
0637
0649

MSN
0051 0056
0115 0122
0157 0158
0181 0182
0207 0208
0229 0230
0249 0251
0268 0269
0289 0290
0302 0306
0325 0328
0345 0346
0367 0371
0393 0395
0408 0409
0427 0428
0447 0449
0465 0470
0489 0490
0508 0510
0540 0545
0562 0565
0579 0580
0607 0608
0621 0622
0638 0639
0650 0651

0065
0354
0082
0072
0118

0066
0414
0099
0078
0121

0067
0441
0438
0083
0125

0076
0496
0448
0086
0135

0057
0126
0159
0183
0209
0231
0253
0272
0291
0307
0329
0350
0372
0398
0410
0429
0450
0472
0491
0512
0548
0566
0582
0609
0623
0640
0653

0059
0127
0164
0185
0210
0232
0254
0273
0292
0308
0330
0351
0373
0399
0416
0430
0452
0475
0497
0523
0549
0568
0585
0610
0625
0641
0654

0068
0138
0165
0194
0211
0234
0255
0277
0293
0309
0331
0355
0378
0400
0417
0431
0454
0476
0499
0525
0551
0569
0587
0611
0627
0643
0655

0073
0141
0166
0198
0213
0237
0256
0279
0294
0311
0332
0356
0380
0401
0418
0432
0456
0479
0500
0527
0553
0571
0589
0612
0629
0644
0656

0081 0140 0195 0303


0584
0093 0094 0104 0110
0137 0152 0153 0160

0168 0205 0219 0252 0259 0260 0275 0276


0347 0353 0361 0362 0368 0370 0376 0386
0424 0445 0466 0480 0511 0528 0537

DATE: Dec 04/08

CONFIGURATION
004

002 004
002 003 004 005
015

004 005

004 015

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 13
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

0364
0493
0519
0544
0583
0633
0699
0787
0827
0908
0968
1012
1094
1204
1273
1417
1455
1503
1587
1638
1701
1763
1859
1960
2067
2303
2381
2736

0385
0495
0520
0550
0586
0642
0715
0792
0835
0915
0970
1015
1133
1207
1276
1421
1458
1511
1596
1642
1704
1772
1869
1967
2080
2305
2462
2756

0412
0498
0521
0552
0591
0652
0725
0796
0841
0920
0974
1017
1144
1214
1293
1425
1462
1517
1602
1651
1707
1776
1878
1970
2105
2320
2472
2996

0434
0502
0522
0555
0593
0664
0731
0802
0848
0926
0983
1021
1153
1219
1299
1428
1465
1519
1607
1658
1711
1783
1881
1974
2107
2323
2480
3081

0458
0505
0524
0560
0595
0666
0746
0806
0852
0935
0987
1023
1161
1220
1307
1431
1472
1521
1611
1666
1713
1788
1921
1977
2115
2324
2488
3106

MSN
0468 0473
0509 0513
0526 0529
0563 0564
0597 0599
0668 0675
0761 0765
0808 0810
0855 0864
0940 0941
0991 0993
1024 1027
1174 1185
1227 1233
1356 1366
1433 1436
1476 1481
1525 1531
1614 1619
1670 1675
1716 1720
1798 1807
1928 1932
1984 1994
2220 2234
2330 2337
2521 2530

DATE: Dec 04/08

0474
0514
0532
0567
0604
0677
0771
0811
0878
0954
0995
1042
1188
1238
1399
1438
1487
1536
1623
1681
1724
1817
1941
1995
2255
2342
2536

0477
0516
0535
0570
0614
0680
0775
0815
0887
0959
1004
1045
1195
1241
1403
1442
1492
1539
1629
1690
1726
1836
1950
2005
2261
2351
2563

0484
0517
0538
0576
0620
0687
0777
0819
0891
0961
1006
1060
1199
1250
1408
1447
1496
1554
1632
1691
1734
1843
1953
2021
2267
2357
2599

0488
0518
0541
0581
0631
0692
0781
0823
0901
0963
1008
1080
1202
1260
1412
1451
1499
1572
1636
1695
1748
1848
1956
2055
2270
2363
2682

CONFIGURATION
007

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 14
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

0542
0671
0688
0701
0716
0728
0740
0752
0766
0782
0797
0814
0829
0842
0856
0868
0880
0893
0906
0921
0933
0947
0962
0977
0992
1009
1026
1038
1052
1065
1078
1090
1103
1115
1126
1138
1150
1164
1176
1190
1205
1222
1235
1248
1262
1274
1287
1300
1313

0543
0672
0689
0702
0717
0729
0741
0754
0767
0783
0798
0816
0830
0843
0857
0869
0881
0894
0907
0922
0934
0948
0964
0979
0994
1010
1028
1039
1054
1066
1079
1091
1104
1116
1127
1139
1151
1165
1177
1191
1206
1223
1236
1249
1263
1275
1288
1301
1314

0546
0673
0690
0703
0718
0730
0742
0755
0768
0784
0800
0817
0831
0844
0858
0870
0882
0895
0909
0923
0936
0949
0965
0980
0996
1011
1029
1040
1055
1067
1081
1092
1105
1117
1128
1140
1152
1166
1178
1192
1208
1224
1237
1251
1264
1277
1289
1302
1315

0572
0676
0691
0704
0719
0732
0743
0756
0769
0785
0801
0818
0832
0845
0859
0871
0883
0896
0911
0924
0937
0950
0966
0981
0997
1013
1030
1041
1056
1069
1082
1093
1106
1118
1129
1141
1154
1167
1179
1193
1209
1225
1239
1252
1265
1279
1290
1303
1316

0660
0678
0693
0705
0720
0733
0744
0757
0770
0786
0803
0820
0833
0846
0860
0872
0884
0897
0912
0925
0938
0951
0967
0982
0998
1014
1031
1043
1057
1070
1083
1095
1107
1119
1130
1142
1155
1168
1180
1194
1210
1226
1240
1253
1266
1280
1291
1304
1317

MSN
0661 0662
0679 0681
0694 0695
0706 0709
0721 0722
0734 0735
0745 0747
0758 0759
0773 0774
0788 0790
0804 0805
0821 0822
0834 0836
0847 0849
0861 0862
0873 0874
0885 0886
0898 0900
0913 0914
0927 0928
0939 0942
0952 0953
0969 0971
0984 0985
0999 1000
1016 1018
1032 1033
1046 1047
1058 1059
1071 1072
1084 1085
1096 1097
1108 1109
1120 1121
1131 1132
1143 1145
1156 1158
1169 1170
1181 1182
1196 1197
1211 1213
1228 1229
1242 1243
1254 1255
1267 1268
1281 1282
1292 1294
1306 1308
1318 1319

DATE: Dec 04/08

0665
0682
0696
0711
0723
0736
0748
0760
0776
0791
0807
0824
0837
0850
0863
0875
0888
0902
0916
0929
0943
0955
0972
0986
1001
1019
1034
1048
1061
1073
1086
1099
1110
1122
1134
1146
1159
1171
1183
1198
1215
1230
1244
1257
1269
1283
1295
1309
1320

0667
0683
0697
0712
0724
0737
0749
0762
0778
0793
0809
0825
0838
0851
0865
0876
0889
0903
0917
0930
0944
0957
0973
0988
1003
1020
1035
1049
1062
1075
1087
1100
1111
1123
1135
1147
1160
1172
1184
1200
1216
1231
1245
1258
1270
1284
1296
1310
1321

0669
0685
0698
0713
0726
0738
0750
0763
0779
0794
0812
0826
0839
0853
0866
0877
0890
0904
0918
0931
0945
0958
0975
0989
1005
1022
1036
1050
1063
1076
1088
1101
1112
1124
1136
1148
1162
1173
1187
1201
1217
1232
1246
1259
1271
1285
1297
1311
1322

0670
0686
0700
0714
0727
0739
0751
0764
0780
0795
0813
0828
0840
0854
0867
0879
0892
0905
0919
0932
0946
0960
0976
0990
1007
1025
1037
1051
1064
1077
1089
1102
1114
1125
1137
1149
1163
1175
1189
1203
1221
1234
1247
1261
1272
1286
1298
1312
1323

CONFIGURATION
002

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 15
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

1324
1337
1348
1360
1372
1384
1395
1409
1423
1440
1454
1471
1486
1501
1514
1529
1543
1555
1567
1580
1593
1609
1624
1639
1652
1667
1682
1696
1712
1731
1743
1755
1767
1781
1797
1821
1885
1931
1993
2043
2072
2119
2144
2188
2233
2252
2292
2346
2380
2436
2471
7

1325
1338
1349
1361
1373
1385
1396
1410
1424
1441
1456
1473
1488
1502
1515
1530
1544
1557
1568
1581
1594
1610
1625
1640
1653
1668
1683
1697
1714
1732
1744
1756
1769
1782
1799
1823
1894
1933
1998
2046
2074
2120
2146
2194
2235
2256
2294
2347
2385
2437
2475

1326
1339
1350
1362
1375
1386
1397
1411
1426
1443
1457
1474
1489
1504
1516
1532
1545
1558
1569
1582
1595
1612
1626
1641
1654
1669
1684
1699
1715
1733
1745
1757
1770
1784
1802
1825
1895
1936
2009
2049
2083
2121
2154
2196
2238
2262
2299
2353
2389
2438
2477

1327
1340
1351
1363
1376
1387
1398
1413
1427
1444
1459
1475
1490
1505
1518
1533
1546
1559
1570
1583
1597
1613
1627
1643
1655
1671
1685
1700
1717
1735
1746
1758
1771
1785
1804
1829
1899
1938
2022
2050
2086
2127
2157
2210
2239
2264
2300
2355
2391
2442
2478

1328
1341
1352
1364
1377
1388
1400
1414
1429
1445
1460
1477
1491
1506
1520
1534
1547
1560
1571
1584
1598
1615
1628
1644
1657
1672
1686
1702
1718
1736
1747
1759
1773
1786
1806
1838
1900
1957
2027
2052
2091
2129
2161
2214
2242
2266
2306
2360
2402
2446
2481

MSN
1329 1330
1342 1343
1353 1354
1365 1367
1378 1379
1389 1390
1401 1402
1415 1416
1430 1432
1446 1448
1461 1463
1478 1479
1493 1494
1507 1508
1522 1523
1535 1537
1548 1549
1561 1562
1573 1574
1585 1586
1600 1601
1616 1617
1630 1631
1645 1646
1659 1661
1673 1674
1687 1688
1703 1705
1719 1721
1737 1738
1749 1750
1760 1761
1774 1775
1787 1789
1808 1809
1854 1862
1906 1907
1958 1964
2033 2034
2053 2056
2097 2098
2131 2133
2170 2174
2219 2221
2244 2245
2268 2272
2308 2311
2364 2365
2411 2412
2451 2455
2486 2492

DATE: Dec 04/08

1331
1344
1355
1368
1380
1391
1404
1418
1434
1449
1466
1480
1495
1509
1524
1538
1550
1563
1575
1588
1603
1618
1633
1647
1662
1677
1689
1706
1722
1739
1751
1762
1777
1790
1812
1871
1910
1969
2036
2057
2101
2137
2176
2223
2248
2281
2322
2370
2416
2460
2493

1332
1345
1357
1369
1381
1392
1405
1419
1435
1450
1467
1482
1497
1510
1526
1540
1551
1564
1576
1590
1604
1620
1634
1648
1663
1678
1692
1708
1723
1740
1752
1764
1778
1791
1814
1873
1911
1979
2037
2062
2104
2138
2180
2225
2249
2283
2326
2375
2418
2463
2494

1334
1346
1358
1370
1382
1393
1406
1420
1437
1452
1469
1483
1498
1512
1527
1541
1552
1565
1577
1591
1605
1621
1635
1649
1664
1679
1693
1709
1725
1741
1753
1765
1779
1792
1816
1879
1914
1981
2038
2068
2106
2140
2181
2229
2250
2288
2329
2378
2428
2466
2495

1336
1347
1359
1371
1383
1394
1407
1422
1439
1453
1470
1484
1500
1513
1528
1542
1553
1566
1578
1592
1606
1622
1637
1650
1665
1680
1694
1710
1728
1742
1754
1766
1780
1793
1818
1883
1918
1987
2040
2069
2116
2143
2184
2230
2251
2289
2338
2379
2429
2469
2498

CONFIGURATION
002

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 16
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2501
2538
2588
2642
2697
2754
2790
2829
2884
3000
3082
3145
0684

2503
2547
2591
2646
2699
2760
2792
2831
2885
3003
3088
3151

2512
2548
2600
2651
2703
2765
2795
2842
2889
3018
3090
3154

2514
2562
2605
2652
2715
2766
2803
2843
2897
3036
3102
3169

2515
2564
2606
2656
2717
2769
2807
2852
2923
3041
3109
3173

MSN
2516 2524
2565 2569
2608 2612
2677 2681
2720 2727
2776 2777
2812 2816
2854 2860
2926 2944
3053 3054
3117 3118
3174 3176

2526
2573
2627
2683
2731
2779
2818
2866
2946
3059
3122
3179

2527
2578
2633
2691
2735
2782
2822
2870
2956
3061
3134
3182

2528
2584
2636
2693
2742
2787
2826
2873
2959
3064
3137
3184

2537
2587
2638
2694
2744
2788
2827
2881
2989
3078
3140
3209

CONFIGURATION
002

007 008

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 17
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

1579
1824
1840
1855
1868
1889
1904
1925
1947
1965
1990
2010
2024
2048
2079
2095
2123
2142
2159
2172
2189
2204
2227
2254
2278
2296
2316
2339
2362
2384
2399
2414
2431
2448
2464
2485
2508
2529
2546
2568
2585
2607
2621
2635
2654
2666
2679
2700
2716
2734
2752
7

1730
1826
1841
1856
1870
1890
1909
1927
1948
1968
1996
2011
2026
2054
2082
2096
2124
2145
2160
2173
2191
2205
2228
2257
2279
2297
2318
2340
2366
2386
2400
2415
2432
2449
2465
2489
2509
2531
2551
2570
2589
2609
2622
2637
2655
2667
2680
2701
2718
2737
2753

1796
1827
1842
1857
1872
1891
1912
1929
1949
1971
1997
2012
2028
2061
2084
2099
2125
2147
2162
2175
2193
2206
2231
2258
2280
2298
2319
2343
2368
2387
2401
2417
2433
2450
2467
2490
2510
2532
2554
2571
2593
2611
2623
2639
2657
2668
2684
2702
2719
2738
2755

1800
1828
1844
1858
1874
1892
1913
1934
1951
1973
2000
2013
2029
2063
2085
2102
2126
2148
2163
2177
2195
2207
2232
2259
2282
2301
2321
2345
2369
2388
2403
2419
2434
2452
2468
2491
2511
2533
2555
2572
2594
2613
2624
2640
2658
2669
2685
2704
2721
2739
2757

1801
1831
1845
1860
1875
1893
1915
1935
1952
1975
2001
2014
2030
2065
2087
2103
2130
2149
2164
2178
2197
2209
2236
2260
2284
2302
2325
2348
2371
2390
2404
2420
2435
2453
2470
2496
2513
2534
2557
2574
2595
2614
2626
2641
2659
2670
2688
2705
2723
2740
2758

MSN
1803 1805
1832 1833
1846 1847
1861 1863
1876 1877
1896 1897
1916 1917
1937 1940
1954 1955
1976 1980
2002 2003
2015 2016
2031 2032
2066 2070
2088 2089
2108 2112
2132 2134
2150 2151
2165 2166
2179 2182
2198 2199
2212 2213
2237 2240
2265 2269
2285 2286
2304 2307
2327 2331
2349 2352
2372 2373
2392 2393
2405 2406
2422 2423
2439 2441
2454 2456
2473 2474
2497 2499
2517 2518
2535 2539
2558 2559
2576 2577
2596 2597
2615 2616
2628 2629
2643 2644
2660 2661
2671 2672
2689 2690
2708 2709
2724 2725
2743 2745
2761 2762

DATE: Dec 04/08

1810
1834
1849
1864
1882
1898
1920
1942
1959
1982
2004
2018
2039
2073
2090
2113
2135
2152
2167
2183
2200
2215
2241
2271
2287
2310
2332
2354
2374
2395
2407
2425
2443
2457
2479
2502
2519
2540
2560
2579
2598
2617
2630
2645
2662
2673
2692
2710
2728
2746
2763

1815
1835
1851
1865
1884
1901
1922
1943
1961
1983
2006
2019
2042
2075
2092
2114
2136
2153
2168
2185
2201
2217
2243
2273
2291
2312
2334
2356
2376
2396
2408
2426
2444
2458
2482
2504
2520
2541
2561
2580
2602
2618
2631
2647
2663
2674
2695
2711
2729
2747
2764

1819
1837
1852
1866
1886
1902
1923
1944
1962
1986
2007
2020
2044
2077
2093
2118
2139
2156
2169
2186
2202
2222
2246
2275
2293
2313
2335
2359
2382
2397
2409
2427
2445
2459
2483
2505
2522
2542
2566
2581
2603
2619
2632
2648
2664
2676
2696
2712
2732
2749
2768

1820
1839
1853
1867
1888
1903
1924
1945
1963
1989
2008
2023
2047
2078
2094
2122
2141
2158
2171
2187
2203
2224
2253
2277
2295
2314
2336
2361
2383
2398
2413
2430
2447
2461
2484
2506
2525
2545
2567
2583
2604
2620
2634
2649
2665
2678
2698
2714
2733
2751
2770

CONFIGURATION
010

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 18
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2771
2789
2808
2828
2844
2857
2874
2891
2905
2922
2939
2958
2975
2986
3002
3019
3032
3048
3066
3086
3103
3121
3138
3153
3166
3183
3196
3210
3228
3246
3263
3277
3289
3304
3317
3331
3346
3361
3377
3392
3410
3422
3437
3451
3466
3502
3520
3537
3554
3571

2772
2791
2810
2830
2845
2858
2875
2892
2906
2924
2940
2960
2976
2987
3004
3020
3033
3049
3068
3087
3104
3123
3139
3155
3167
3185
3197
3211
3230
3248
3264
3278
3291
3305
3318
3332
3347
3362
3378
3393
3411
3423
3439
3453
3468
3505
3521
3538
3555
3578

2773
2794
2811
2832
2846
2859
2877
2893
2907
2925
2942
2961
2977
2988
3006
3021
3035
3050
3069
3089
3105
3124
3141
3156
3168
3186
3199
3213
3231
3250
3266
3279
3292
3306
3319
3335
3348
3364
3379
3394
3412
3424
3440
3454
3470
3506
3524
3541
3556
3580

2774
2796
2813
2833
2847
2861
2878
2894
2908
2928
2943
2962
2978
2990
3007
3023
3037
3052
3071
3091
3107
3125
3142
3157
3170
3187
3200
3215
3232
3252
3268
3280
3293
3308
3320
3336
3349
3365
3380
3395
3413
3425
3442
3455
3472
3508
3526
3543
3558
3586

2775
2797
2814
2834
2848
2863
2879
2896
2909
2929
2945
2963
2979
2991
3008
3024
3039
3055
3072
3093
3108
3127
3143
3158
3171
3188
3201
3218
3234
3253
3269
3281
3295
3309
3321
3337
3351
3366
3381
3396
3414
3426
3443
3456
3473
3510
3528
3544
3559
3589

MSN
2778 2780
2798 2800
2815 2817
2835 2836
2849 2850
2864 2865
2880 2883
2898 2899
2911 2913
2930 2932
2947 2948
2964 2966
2980 2981
2992 2993
3010 3011
3025 3026
3040 3042
3056 3057
3074 3076
3094 3095
3111 3113
3128 3129
3144 3147
3159 3160
3172 3175
3189 3190
3202 3203
3219 3221
3236 3237
3255 3256
3270 3271
3282 3284
3296 3298
3310 3311
3323 3324
3338 3341
3352 3353
3368 3370
3383 3384
3398 3400
3415 3416
3427 3428
3445 3446
3457 3460
3475 3477
3511 3514
3529 3532
3545 3548
3560 3561
3590 3604

DATE: Dec 04/08

2781
2802
2819
2838
2851
2867
2886
2900
2914
2934
2950
2968
2982
2994
3012
3027
3043
3058
3077
3096
3114
3131
3148
3161
3177
3192
3204
3223
3239
3257
3272
3285
3299
3312
3325
3342
3354
3373
3385
3402
3417
3431
3447
3461
3478
3515
3533
3549
3563

2783
2804
2820
2839
2853
2869
2887
2901
2915
2935
2952
2969
2983
2995
3014
3028
3044
3060
3079
3097
3115
3132
3149
3162
3178
3193
3205
3224
3240
3258
3273
3286
3300
3313
3327
3343
3357
3374
3386
3403
3418
3432
3448
3463
3479
3516
3534
3550
3564

2784
2805
2824
2840
2855
2871
2888
2902
2917
2937
2953
2970
2984
2997
3016
3029
3045
3063
3080
3099
3116
3135
3150
3164
3180
3194
3206
3226
3242
3259
3275
3287
3301
3314
3328
3344
3358
3375
3388
3404
3420
3433
3449
3464
3499
3517
3535
3551
3567

2785
2806
2825
2841
2856
2872
2890
2904
2920
2938
2954
2973
2985
2998
3017
3031
3047
3065
3083
3101
3119
3136
3152
3165
3181
3195
3208
3227
3245
3261
3276
3288
3303
3316
3330
3345
3359
3376
3389
3407
3421
3435
3450
3465
3501
3519
3536
3553
3569

CONFIGURATION
010

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 19
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

1599
2686
3220
1794
2041
2226
2610
2799
2927
3022
3146
3247
3297
3355
3419
3539
3593
2035
2155
3001
3391
3518
(5)

2328
2750
3225
1811
2045
2247
2653
2809
2933
3034
3191
3249
3302
3360
3429
3546
3600
2059
2274
3030
3406
3531

2333
2910
3238
1850
2060
2290
2687
2823
2936
3051
3198
3251
3307
3367
3434
3552

2358
2918
3333
1887
2064
2309
2707
2862
2957
3067
3207
3254
3315
3369
3441
3557

2367
2931
3363
1905
2076
2315
2713
2868
2965
3070
3212
3262
3322
3372
3458
3566

MSN
2377 2394
2951 2955
3530
1926 1946
2110 2117
2410 2476
2726 2730
2882 2895
2971 2974
3075 3098
3217 3222
3265 3267
3326 3329
3382 3387
3459 3462
3573 3575

2071
2556
3062
3408
3540

2081
2586
3214
3409
3547

2100
2625
3216
3430
3562

2109
2786
3371
3436
3565

2317
2821
3390
3444
3588

2523 2544 2552 2575


2967 2972 3009 3100
1966
2190
2543
2741
2903
2999
3112
3229
3274
3334
3397
3471
3583

1972
2208
2549
2759
2912
3005
3120
3233
3283
3339
3399
3523
3584

1978
2211
2553
2767
2916
3013
3126
3235
3290
3340
3401
3525
3587

1988
2216
2590
2793
2919
3015
3130
3241
3294
3350
3405
3527
3592

2344
2876
3438
3452
3595

2350 2582 2601


3084
3469 3585 3602
3467 3474 3476

CONFIGURATION
012

009

011
002 010
013
014

Configuration definition
**CONF 002
Config. 002 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
22020J0679 and Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162) and Mod.
No. 32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 003
Config. 003 is valid for aircraft on which Mod. No. 20024J0006 is embodied, on which
Mod. No. 22020J0679 and Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162)
and Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and
Mod. No. 25995P4341 (Service Bulletin No. A320-25-1186) and Mod. No. 20079K0061
and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not embodied, and
on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 004
Config. 004 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
22020J0679 and Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162) and Mod.
No. 32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is accomplished.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 20
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 005
Config. 005 is valid for aircraft on which Mod. No. 20024J0006 is embodied, on which
Mod. No. 22020J0679 and Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162)
and Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and
Mod. No. 25995P4341 (Service Bulletin No. A320-25-1186) and Mod. No. 20079K0061
and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not embodied, and
on which Service Bulletin No. A320-28-1059 is accomplished.
**CONF 007
Config. 007 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
22020J0679 and Mod. No. 25995P4341 (Service Bulletin No. A320-25-1186) are
embodied, on which Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162) and
Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and
Mod. No. 20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066)
are not embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 008
Config. 008 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
22020J0679 are embodied, on which Mod. No. 31051P6983 (Service Bulletin No.
A320-27-1162) and Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No.
38241K11694 and Mod. No. 25995P4341 (Service Bulletin No. A320-25-1186) and Mod.
No. 20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are
not embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 009
Config. 009 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
22020J0679 and Mod. No. 31051P6983 (Service Bulletin No. A320-27-1162) and Mod.
No. 25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 010
Config. 010 valid for aircraft on which Mod. No. 20024J0006 and Mod. No. 31051P6983
(Service Bulletin No. A320-27-1162) and Mod. No. 25995P4341 (Service Bulletin
No. A320-25-1186) are embodied, on which Mod. No. 22020J0679 and Mod. No.
32411P7771 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 011
Config. 011 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
32411P7771 and Mod. No. 25995P4341 (Service Bulletin No. A320-25-1186) are
embodied, on which Mod. No. 22020J0679 and Mod. No. 31051P6983 (Service Bulletin
No. A320-27-1162) and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod.
No. 20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are
not embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 21
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 012
Config. 012 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
31051P6983 (Service Bulletin No. A320-27-1162) and Mod. No. 32411P7771 and Mod.
No. 25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
22020J0679 and Mod. No. 30034P6310 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 013
Config. 013 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
31051P6983 (Service Bulletin No. A320-27-1162) and Mod. No. 30034P6310 and Mod.
No. 25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
22020J0679 and Mod. No. 32411P7771 and Mod. No. 38241K11694 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 014
Config. 014 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
31051P6983 (Service Bulletin No. A320-27-1162) and Mod. No. 38241K11694 and Mod.
No. 25995P4341 (Service Bulletin No. A320-25-1186) are embodied, on which Mod. No.
22020J0679 and Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No.
20079K0061 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is not accomplished.
**CONF 015
Config. 015 is valid for aircraft on which Mod. No. 20024J0006 and Mod. No.
25995P4341 (Service Bulletin No. A320-25-1186) and Mod. No. 20079K0061 are
embodied, on which Mod. No. 22020J0679 and Mod. No. 31051P6983 (Service Bulletin
No. A320-27-1162) and Mod. No. 32411P7771 and Mod. No. 30034P6310 and Mod. No.
38241K11694 and Mod. No. 24040K3556 (Service Bulletin No. A320-31-1066) are not
embodied, and on which Service Bulletin No. A320-28-1059 is accomplished.
NOTE:

Due to differences between retrofit and production solutions, even if Mod.


No. 24373J1255 has been embodied in production, Service Bulletin No.
A320-28-1059 is considered not accomplished.

NOTE:

For further information concerning the Configuration Definition, refer to


Appendix 01 - Configuration Definition Table .

(6)

Material Effectivity

**CONF 002 thru 005, 015


MATERIAL
Kit 321346A01R03
Kit 321346A03R01
Supplementary kit 321346A03S01

QTY PER A/C


1
1
1

Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01

1
1
1

Component COMPA01

DATE: Dec 04/08

SEE NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 22
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

This table shows the supplemental kits (S kits) needed to update the kits already held in
your stock to the latest status.
Kit held by Operator

Supplementary Kit required

321346A03R00
321346A03R01

Latest status of Kit

321346A03S01
NONE

321346A03R01
321346A03R01

**CONF 007 thru 008


MATERIAL
Kit 321346A01R03
Kit 321346A04R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF 009
MATERIAL
Kit 321346A01R03
Kit 321346A05R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF 010
MATERIAL
Kit 321346A01R03
Kit 321346A06R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF 011
MATERIAL
Kit 321346A01R03
Kit 321346A07R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

DATE: Dec 04/08

QTY PER A/C


1
1
1
1
1

SEE NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 23
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 012
MATERIAL
Kit 321346A01R03
Kit 321346A08R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF 013
MATERIAL
Kit 321346A01R03
Kit 321346A09R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF 014
MATERIAL
Kit 321346A01R03
Kit 321346A10R00
Kit 321346A11R00
Consumable CMLA11
Reidentified part set REIDA01
Component COMPA01

QTY PER A/C


1
1
1
1
1

SEE NOTES

**CONF ALL
B.

CONCURRENT REQUIREMENTS
None

C.

REASON
(1)

History
Uncommanded Nose Landing Gear (NLG) retraction can occur when there is a dormant
seal failure in the Landing Gear Retract Valve (causing retraction pressure to be applied
to the gear) and a Landing Gear Control and Interface Unit (LGCIU) power interrupt
occurs. Under normal circumstances the NLG is held in the downlock position by the
doors closed hydraulic pressure to the NLG downlock actuator. In the failure condition,
doors closed pressure might be lost if the LGCIU suffers a power supply interrupt longer
than 3mSec, thus allowing, under certain circumstances, the dormant seal failure to
retract the NLG.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 24
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Objective/Action
This Service Bulletin provides a power interrupt protection for the LGCIU(s) using diodes
(Power Supply De-coupling Unit (PSDU)) to split the LGCIU 28V supply between the
transformer rectifiers and the batteries. This will enable the battery bus 7PP to supply
LGCIU(s) in the event of an interrupt on the normal LGCIU supply. A time delay relay
will also be installed so that the battery cannot be drained.
The safety valve relay (pre mod 48GA) will be changed from a normal type to a 1
second delay on energization (post mod 62GA). This one-second delay will give the
LGCIU time to power up and energise the doors closed valve.

(3)

Advantages
Accomplishment of this modification will ensure the door closed pressure remains, and
thus downlock pressure, even in the case of LGCIU power interrupt. The LG safety valve
49GA will be controlled by a 1 second time delay relay 62GA to allow time for the
LGCIU(s) to power up. The LG leg extension will be delayed by one second due to the
delay relay 62GA.

(4)

Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in "PLANNING INFORMATION".
This Service Bulletin has an impact on flight operations documentation; refer to
AirbusWorld to consult the available Modification Operational Impact (MOI).

D.

DESCRIPTION
To accomplish this Service Bulletin it is necessary to :

**CONF 002
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 25
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.
05) (Applicable for Configs. 002 thru 005 and Config. 015)
(1) Replace the Placard 31LM (line R)
**CONF 003
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 26
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.
05) (Applicable for Configs. 002 thru 005 and Config. 015)
(1) Replace the Placard 31LM (line R)
**CONF 004
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.
05) (Applicable for Configs. 002 thru 005 and Config. 015)
(1) Replace the Placard 31LM (line R)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 27
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 005
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.
05) (Applicable for Configs. 002 thru 005 and Config. 015)
(1) Replace the Placard 31LM (line R)
**CONF 007
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 28
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 008
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 29
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(13) Install the Equipment Removed for Access in the Cockpit


(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 009
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 010
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 30
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 011
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 31
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 012
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 32
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 013
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 014
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Points in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 33
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(7) Modify the Equipment in the Shelf 91VU


(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.
01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
**CONF 015
Task 321346-831-897-001: Modification
(1) Remove the Equipment for Access in the Cockpit
(2) Remove the Equipment for Access in the Avionics Compartment
(3) Install the New Grounding Point in the Avionics Compartment at FR10
(4) Modify the Equipment and the Wiring in the C/B Panel 121VU
(5) Modify the Equipment and the Wiring in the Shelf 93VU
(6) Modify the Wiring in the Shelf 94VU
(7) Modify the Equipment in the Shelf 91VU
(8) Modify the Wiring between the Shelves 91VU and 93VU
(9) Modify the Wiring between the Shelves 91VU and 94VU
(10) Modify the Wiring between the Shelf 91VU and the Avionics Compartment
(11) Modify the Wiring between the Rear Panel 120VU and the FWD Electronics Rack
90VU
(12) Modify the Wiring between the Rear Panel 120VU and the Shelf 91VU
(13) Install the Equipment Removed for Access in the Cockpit
(14) Install the Equipment Removed for Access in the Avionics Compartment
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 34
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
(1) Reidentify the LGCIU Plate in the Shelf 91VU
Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.
05) (Applicable for Configs. 002 thru 005 and Config. 015)
(1) Replace the Placard 31LM (line R)
**CONF ALL
E.

COMPLIANCE
(1)

Classification
MANDATORY: Service Bulletin must be accomplished.

(2)

Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Aviation Safety Agency (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.

F.

APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.

G.

MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operators circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.

**CONF 002
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00
Remove the Equipment for Access in the Avionics
Compartment

DATE: Dec 04/08

4.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 35
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


Install the New Grounding Points in the Avionics
1.00
Compartment at FR10
Modify the Equipment and the Wiring in the C/B Panel
121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

5.00

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

3.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

0.25

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Replace the Placard 31LM (line R)

0.50

Close-Up

0.50

TOTAL MANHOURS
7

0.50

1.50

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 36
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
ELAPSED TIME (HOURS)

1.50

**CONF 003
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00
Remove the Equipment for Access in the Avionics
Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

5.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

DATE: Dec 04/08

0.25
0.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 37
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Replace the Placard 31LM (line R)

0.50
0.50

Close-Up

0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 004
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00
Remove the Equipment for Access in the Avionics
Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up
7

5.00

2.00
1.00

4.00
3.00

4.50
4.00

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 38
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


TOTAL MANHOURS
48.00
ELAPSED TIME (HOURS)
35.50
NOTE:

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Replace the Placard 31LM (line R)

0.50
0.50

Close-Up

0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 005
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

DATE: Dec 04/08

5.00

2.00
1.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 39
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


Modify the Wiring between the Rear Panel 120VU and 3.00
the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and 4.00
the Shelf 91VU
Install the Equipment Removed for Access in the
3.00
Cockpit
Install the Equipment Removed for Access in the
Avionics Compartment

5.00

Tests
Close-Up

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Replace the Placard 31LM (line R)

0.50
0.50

Close-Up

0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 007
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU

3.00

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 40
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


Modify the Equipment and the Wiring in the Shelf
5.00
93VU
Modify the Wiring in the Shelf 94VU
0.50
Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

2.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

0.25

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

1.00
1.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 41
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 008
Task 321346-831-897-001: Modification
3.00

Get Access
On Aircraft
Remove the Equipment for Access in the Cockpit

2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

5.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

0.25

1.00
1.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 42
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 009
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00
Remove the Equipment for Access in the Avionics
Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

5.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 43
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 010
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

DATE: Dec 04/08

5.00

2.00
1.00

4.00
3.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 44
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Tests
Close-Up

Task 321346-831-897-001: Modification


4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 011
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU

2.00

DATE: Dec 04/08

5.00

2.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 45
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


Modify the Wiring between the Shelf 91VU and the
1.00
Avionics Compartment
Modify the Wiring between the Rear Panel 120VU and
the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

4.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

0.25

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 012
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 46
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


Modify the Equipment and the Wiring in the C/B Panel 3.00
121VU
Modify the Equipment and the Wiring in the Shelf
5.00
93VU
Modify the Wiring in the Shelf 94VU
0.50
Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

2.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

0.25

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

1.00
1.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 47
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 013
Task 321346-831-897-001: Modification
3.00

Get Access
On Aircraft
Remove the Equipment for Access in the Cockpit

2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

5.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

0.25

1.00
1.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 48
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 014
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00
Remove the Equipment for Access in the Avionics
Compartment

4.00

Install the New Grounding Points in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

1.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

Tests
Close-Up

2.00
1.00

4.00
3.00

4.50
4.00

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

5.00

48.00
35.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAA given in Appendix 02 - Manpower Gantt Chart

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 49
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Close-Up

0.50
0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 015
Task 321346-831-897-001: Modification
Get Access
3.00
On Aircraft
Remove the Equipment for Access in the Cockpit
2.00

Remove the Equipment for Access in the Avionics


Compartment

4.00

Install the New Grounding Point in the Avionics


Compartment at FR10

1.00

Modify the Equipment and the Wiring in the C/B Panel


121VU
Modify the Equipment and the Wiring in the Shelf
93VU
Modify the Wiring in the Shelf 94VU

3.00

0.50

Modify the Equipment in the Shelf 91VU

4.00

Modify the Wiring between the Shelves 91VU and


93VU
Modify the Wiring between the Shelves 91VU and
94VU
Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

2.00

Modify the Wiring between the Rear Panel 120VU and


the FWD Electronics Rack 90VU
Modify the Wiring between the Rear Panel 120VU and
the Shelf 91VU
Install the Equipment Removed for Access in the
Cockpit

3.00

Install the Equipment Removed for Access in the


Avionics Compartment

5.00

DATE: Dec 04/08

5.00

2.00
1.00

4.00
3.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 50
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-897-001: Modification


4.50
4.00

Tests
Close-Up

TOTAL MANHOURS
ELAPSED TIME (HOURS)
NOTE:

51.00
38.50

For an explanation of the manhours and elapsed time, refer to the Gantt
Chart, Fig. A-FXXAB given in Appendix 02 - Manpower Gantt Chart

Task 321346-831-898-001: Modification - Additional Work No. 01 (Introduced by Revision No.


01)
Get Access
On Aircraft
Reidentify the LGCIU Plate in the Shelf 91VU

0.25
0.50

Close-Up

0.25

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

Task 321346-831-899-001: Modification - Additional Work No. 02 (Introduced by Revision No.


05) (Applicable for Configs. 002 thru 005 and Config. 015)
Get Access
On Aircraft
Replace the Placard 31LM (line R)

0.50
0.50

Close-Up

0.50

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF ALL
H.

WEIGHT AND BALANCE


The weight and balance estimates given in this Service Bulletin are based on the
Manufacturers Empty Weight (MEW) and do not include operators items. For the definition of
MEW and operators items, refer to the Weight and Balance Manual (WBM) Chapter 1-00-07.
Manufacturers Empty Weight
Effect on Balance

I.

+1.075 KG
+6.314 KGM

(+2.3699 LB)
(+45.669 LB.FT )

ELECTRICAL LOAD DATA


The values given below show the increase (+) or decrease (-) of the electrical load resulting
from the accomplishment of this Service Bulletin.
(1)

Direct Current (DC) Load Changes


-

Circuit Breaker : 58GA (New)


Designation : LGCIU/BAT SPLY/SYS 1
Busbar : 701PP
Nominal Power : 103.8W
Electrical Load Delta : +2.8W (coil of 60GA) whatever the phases

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 51
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:

Circuit Breaker : 59GA (New)


Designation : LGCIU/BAT SPLY/SYS 2
Busbar : 702PP
Nominal Power : 69.8W
Electrical Load Delta : +2.8W (coil of 61GA) whatever the phases

NOTE:

(2)

701 PP is increased by 103,8W (2,8W + 101W which is the max current


value of C/B 1GA) only during electrical transient as it can occur during
main Alternating Current (AC) sources (GEN1/2, APU GEN, Ext Pwr).

702 PP is increased by 69,8W (2,8W + 67W which is the max current


value of C/B 2GA) only during electrical transient as it can occur during
main Alternating Current (AC) sources (GEN1/2, APU GEN, Ext Pwr).

Alternating Current (AC) Load Changes


Not Changed

J.

REFERENCES

**CONF 002
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

DATE: Dec 04/08

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

51-42-00
1-00-07

51-44-11

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 52
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 003
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 004
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 53
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Structural Repair Manual (SRM)


Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 005
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-52-10
20-56-51

20-33-44
20-52-21

20-51-20
20-55-00

**CONF 007
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 54
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Service Bulletin (SB)

A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 008
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

**CONF 009
Aircraft Maintenance Manual (AMM)

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

Consumable Material List (CML)


7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 55
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 010
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

DATE: Dec 04/08

51-42-00
1-00-07

51-44-11

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 56
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 011
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 012
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 57
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Structural Repair Manual (SRM)


Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 013
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-52-10
20-56-51

20-33-44
20-52-21

20-51-20
20-55-00

**CONF 014
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 58
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Service Bulletin (SB)

A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

06-20-00
11-00-00
20-21-15
21-43-00
21-63-34
24-22-34
24-41-00
26-16-00
27-94-00
31-50-00
32-30-00
32-42-34
32-49-34
33-14-00

06-31-53
12-34-24
20-28-00
21-43-34
22-96-00
24-23-34
25-11-41
26-17-00
27-94-34
31-60-00
32-31-00
32-46-00
32-69-00
52-41-00

06-41-53
20-21-11
21-26-00
21-63-00
22-97-00
24-38-51
25-13-41
26-17-34
28-51-35
32-00-00
32-31-71
32-49-00
33-13-00

20-33-00
20-33-44
20-52-10
20-52-21
20-56-51
A320-25-1186
A320-27-1162
A320-28-1059
A320-31-1066

20-51-20
20-55-00

**CONF 015
Aircraft Maintenance Manual (AMM)

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

Service Bulletin (SB)

Standards Manual (SM)


Structural Repair Manual (SRM)
Weight and Balance Manual (WBM)

51-42-00
1-00-07

51-44-11

**CONF ALL
K.

PUBLICATION AFFECTED

Aircraft Schematic Manual (ASM)


Aircraft Wiring Manual (AWM)

Illustrated Parts Catalog (IPC)


Master Minimum Equipment List (MMEL)
Maintenance Planning Document (MPD)

31-54-00
24-68-12
32-31-02
32-31-09
93-01-21
32-31-08

24-68-13
32-31-03
32-31-10

31-54-94
32-31-04
32-31-11

32-30-00

This Service Bulletin has an impact on flight operations documentation. Refer to ISI
00.00.00135 Flight Operations Products for further information on the update of affected
Flight Operations Products.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 59
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Technical queries should be addressed through TechRequest on AirbusWorld using


Technical Data/Support to report Service Bulletins form.
L.

INTERCHANGEABILITY/MIXABILITY
Not Applicable

M.

SPARES
Placard
Placard
Placard
Placard
Placard
Placard
Placard
Placard
Placard
Plate-Assy

002053-07
002053-11
723-1080-12
D11311307A00
D11311369A00
D11311500A00
D11311513A00
D11311515A00
D11312004A00
D9251102600000

Plate-Assy

D9251247600000

Plate-Assy

D9251335500000

The parts listed here must not be installed anymore on aircraft which have accomplished this
Service Bulletin or which have the equivalent production modification embodied.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 60
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2.

MATERIAL INFORMATION

**CONF ALL
A.

MATERIAL - PRICE AND AVAILABILITY


(1)

Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is :

Kit 321346A01R03
Kit 321346A03R01
Kit 321346A04R00
Kit 321346A05R00
Kit 321346A06R00
Kit 321346A07R00
Kit 321346A08R00
Kit 321346A09R00
Kit 321346A10R00
Kit 321346A11R00
Supplementary kit 321346A03S01

AIRBUS Material, Logistics and Suppliers


ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
For
ordering
by
internet:
http://spares.airbus.com
For ordering by E-mail: airbus.kit@airbus.com
Telephone Hotline: +49 40 743 51660

AIRBUS Material, Logistics and Suppliers do not stock standard hardware as competitive
multiple suppliers ensure access to minimum prices. AIRBUS recommends Customers
with aircraft shown in the effectivity of this Service Bulletin to send a purchase order to
KLX Aerospace Solutions. The address is:
Component COMPA01

(2)

KLX Aerospace Solutions.


10000 NW 15th Terrace Miami
FL 33172
USA
Tel EMEA: +49 (0) 40 822 285 31500
Tel US: +1 305 925 2600
Tel ASIA: +1 310 900 1300
Fax EMEA: +49 (0) 40 822 285 31010
Fax US: +1 305 507 7191
Fax ASIA: +1 310 819 1200
SITA: MIAMMCR
E-Mail: AOGdesk@klx.com
internet: http://www.KLXaerospace.com
or, alternatively any other source on the open
market.

Price and Availability


NOTE:

Operators that have already received Kit 321346A03 at a previous


revision must complete it as per the table below:
Kit held by
Operator

Supplementary
kit required

321346A03R00
321346A03R01
7

DATE: Dec 04/08

321346A03S01
NONE

latest status of
kit

INST/DISP

321346A03R01
321346A03R01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 61
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A03R01 does not require an Kit 321346A03S01 because Kit


321346A03S01 is included in 321346A03R01.
Kit 321346A01R03
Cost
Availability

9,290.00 USD
270 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A03R01
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Supplementary kit 321346A03S01
Cost
Availability

186.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A04R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 62
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A05R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A06R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A07R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A08R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A09R00
Cost
Availability
7

170.00 USD
90 calendar days from receipt of order

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 63
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A10R00
Cost
Availability

170.00 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Kit 321346A11R00
Cost
Availability

83.60 USD
90 calendar days from receipt of order

The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
Component COMPA01
Operator supplied standard hardware parts required to accomplish this Service Bulletin,
are to be supplied from the operators stock.
B.

INDUSTRY SUPPORT INFORMATION


For the Kit 321346A01R03, AIRBUS will provide a 50% reduction to the applicable sales
prices given in paragraph 2.A.(2) for orders placed before Oct 31/17.

C.

LIST OF COMPONENTS
This table shows the supplemental kits (S kits) needed to update the kits already held in your
stock to the latest status.

Kit held by Operator

Supplementary Kit required

321346A03R00
321346A03R01

321346A03S01
NONE

DATE: Dec 04/08

Latest status of Kit


321346A03R01
321346A03R01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 64
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A01R03
ITEM NEW PART N

QTY (UM) KEYWORD

1
3
4
13

NSA931324-075
ASNA2080G01
ASNA2080G04
E0217XUU001A2

2
5
5
1

C/B
Button
Button
Relay

14
15
16
21
22
23
24
25
26

E0219ASXUU
MS21042-04
E0425A2001
D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
3
1
1
8
10
10
2
2

Base
Nut
Module
Plate
Screw
Washer
Nut
Mount
Clamp

27
35
36
37
38

NAS1801-3-13
NAS1801-3-10
EN3646A61210BW
ABS0638A12
EN3646A61210BN
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA935401-08
NSA937901FM

2
1
1
2
1
1
1
850
850
600
2

Screw
Screw
CNCTR
BACKSHLL
CNCTR
Bundle
Set
Tie
Tie
Tie
Module

NOTE:

ITEM OLD PART N

INT

SEE
NOTES

If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.

Kit 321346A03R01
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312197A00
NOTE:

Placard

INT

SEE
NOTES

002053-07

If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.

Kit 321346A04R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

D11311610A00

(2)

DATE: Dec 04/08

Placard

INT

SEE
NOTES

723-1080-12

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 65
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A05R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312093A00

Placard

INT

SEE
NOTES

INT

SEE
NOTES

INT

SEE
NOTES

INT

SEE
NOTES

INT

SEE
NOTES

INT

SEE
NOTES

ITEM OLD PART N

INT

SEE
NOTES

INT

SEE
NOTES

D11311369A00

Kit 321346A06R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312090A00

Placard

D11311500A00

Kit 321346A07R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11311641A00

Placard

D11311515A00

Kit 321346A08R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312094A00

Placard

D11311513A00

Kit 321346A09R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312095A00

Placard

D11311307A00

Kit 321346A10R00
ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

(2)

D11312091A00

Placard

D11312004A00

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

QTY (UM) KEYWORD


1

Bundle

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM) KEYWORD

ITEM OLD PART N

D11312197A00

Placard

(2)

3
4

ASNA2080G01
ASNA2080G04

5
5

Button
Button

DATE: Dec 04/08

D11311600A00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 66
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:

D.

If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.

LIST OF MATERIALS - OPERATOR SUPPLIED


(1)

Consumable Materials
Consumable CMLA11

ITEM DESCRIPTION

REFERENCE TO CML
MAT. No.
08BBB1

Non Aqueous Cleaner-- Petroleum


Based
(2)

QTY PER A/C

SEE
NOTES

As required

Components
Component COMPA01

ITEM NEW PART N

QTY (UM) KEYWORD

E0425A2001

(3)

ITEM OLD PART N

INT

SEE
NOTES

Module

NOTE:

If you find part numbers of hardware components in the related kit(s)


which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin, refer to Standards Manual (SM). The SM will give you the
correct part number to part number relationship.

NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.

Equipment
None

E.

PARTS TO BE RE-IDENTIFIED BY OPERATOR


NOTE:

Reidentified part set REIDA01 is necessary for the ADDITIONAL WORK No.
01 only.

Reidentified part set REIDA01


ITEM NEW PART N
D9251719400095
F.

KEYWORD
Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

TOOLING
None

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 67
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

This Page Intentionally Left Blank

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 68
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

3.

ACCOMPLISHMENT INSTRUCTIONS
Task 321346-831-897-001 - Modification
WARNING:

MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

CAUTION:

ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP


ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
-

PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS


NECESSARY ON WIRING AND COMPONENTS.

REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND


OTHER CONTAMINATION.

THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION


AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.

NOTE:

The accomplishment instructions of this Service Bulletin include procedures given


in other documents or in other sections of the Service Bulletin. When the words
refer to are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words in
accordance with are used then the given procedure must be followed.

NOTE:

The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.

NOTE:

Manual titles given in the accomplishment instructions are referred to by acronyms.


Refer to paragraph 1.J., References, for the definition of acronyms.

NOTE:

This Service Bulletin is classified mandatory or expected to be classified mandatory


by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.

NOTE:

Discarded parts must be managed at the operators discretion.

NOTE:

This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 69
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
Task Associated Data
**CONF 002
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 003
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 004
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

48.00
35.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 70
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 005
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 007
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 008
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 009
Zone
120 210
From 210 to 120

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 71
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 010
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 011
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 012
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 72
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 013
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 014
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

48.00
35.50

**CONF 015
Zone
120 210
From 210 to 120
Modified FIN
48GA 48GAA 48GAA8 56GA 57GA 58GA 59GA 62GA 62GAA 31LM 201VCA
201VCA1 203VCA 203VCA1 679VG 217VT 217VT9 217VT10 217VT91
Access
Door
811 812 822 831
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

51.00
38.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 73
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
A.

GENERAL

**CONF 002
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

QTY PER A/C

SEE
NOTES

As required

References
Aircraft Maintenance Manual (AMM)
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 74
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.
(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 75
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 003
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

Aircraft Maintenance Manual (AMM)

QTY PER A/C

SEE
NOTES

As required

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 76
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.
(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 004
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 77
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

Aircraft Maintenance Manual (AMM)

QTY PER A/C

SEE
NOTES

As required

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 78
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.
(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 005
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based
7

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 79
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 80
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 007
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 81
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 82
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 008
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 83
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 84
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 009
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 85
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 86
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 010
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 87
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 88
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 011
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 89
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 90
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 012
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 91
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 92
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 013
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 93
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 94
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 014
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 95
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 96
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 015
(1)

Subtask 321346-910-001-001 - Standard Practices


Manpower Resources

Skills

NON SPECIFIC
Material necessary to do the job

Consumable CMLA11
ITEM DESCRIPTION
Non Aqueous Cleaner-Petroleum Based

REFERENCE TO
CML MAT. No.
08BBB1

DATE: Dec 04/08

QTY PER A/C

SEE
NOTES

As required

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 97
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
06-20-00, Page Block 001
06-31-53, Page Block 001
06-41-53, Page Block 001
11-00-00, Page Block 201
Task 20-21-11-911-001
Task 20-21-15-912-001
Task 20-28-00-912-004

Consumable Material List (CML)


Elec. Std. Practices Manual (ESPM)

20-33-00
20-33-44
20-51-20
20-52-21
20-56-51

Standards Manual (SM)


Structural Repair Manual (SRM)

51-42-00
51-44-11

(a)

For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).

(b)

For the Frame (FR) identification, refer to AMM 06-31-53, Page Block 001.

(c)

For the identification of zones, refer to AMM 06-20-00, Page Block 001.

(d)

For the identification of access panels, refer to AMM 06-41-53, Page Block 001.

(e)

Tag all the parts you must remove and retain to make the subsequent installation
easier.

(f)

Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.

(g)

If you find part numbers of hardware components in the related kit(s) which you
cannot identify in the LIST OF COMPONENTS of this Service Bulletin, refer to the
Standards Manual (SM). The SM will give you the correct part number to part
number relationship.

(h)

Drill and deburr the holes in accordance with SRM 51-44-11.

(i)

Remove and install the fasteners in accordance with SRM 51-42-00.

(j)

To torque tighten the standard threaded fasteners, refer to AMM Task


20-21-11-911-001.

(k)

To torque tighten the electrical component fasteners, refer to AMM Task


20-21-15-912-001.

(l)

For the electrical


20-28-00-912-004.

bonding,

refer

to

ESPM

20-51-20

and

AMM

Task

(m) For the installation of placards, refer to AMM 11-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 98
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(n)

Clean the surfaces at the location of the placards with:


Non Aqueous
08BBB1
Cleaner-- Petroleum
Based

(2)

As required

(o)

For the general installation of electrical wire harnesses, refer to ESPM 20-33-00.

(p)

Put blanking caps on the disconnected electrical connectors.

(q)

To install new wires, cut them to the necessary length, crimp the terminals and
connect them.

(r)

Route the new wires with the wires that are in the aircraft.

(s)

Use existing spare conduits to route wires in locations difficult to get access.

(t)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(u)

For the cable tie application and tooling, refer to ESPM 20-33-44 and ESPM
20-56-51.

Subtask 321346-839-001-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF ALL
B.

PREPARATION

**CONF 002
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 99
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(3)

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 24-38-51-000-001
(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 100
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 101
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 003
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 12-34-24-869-002
NOTE:

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 102
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(3)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 103
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 104
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 004
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 105
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(3)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 106
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(i)

(4)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 107
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 005
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 12-34-24-869-002
NOTE:

(2)

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 108
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(3)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 109
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 110
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 007
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 111
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 24-38-51-000-001

(4)

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 112
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 008
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 113
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 114
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 115
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 009
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 116
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 117
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 118
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 010
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 119
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 120
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 121
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 011
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 122
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 123
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 124
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 012
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 125
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 126
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 127
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 013
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 128
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 129
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 130
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 014
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 131
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 132
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 133
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

**CONF 015
(1)

Subtask 321346-941-001-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 134
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

(2)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access doors 811, 812 and 822.

Subtask 321346-010-001-001 - Remove/Open for Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 25-11-41-000-001
Task 25-13-41-000-001
Task 25-13-41-000-002
Task 52-41-00-010-002

(a)

Open the access doors 811, 812 and 822, refer to AMM Task 52-41-00-010-002.

(b)

In the cockpit, remove the sidewall panels 212JW and 212HW, refer to AMM Task
25-13-41-000-002.

(c)

In the cockpit, remove the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-000-001.

(d)

In the cockpit, remove the third occupant seat 14MM, refer to AMM Task
25-11-41-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 135
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-862-001-001 - De-Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(4)

References
Task 24-38-51-000-001

(a)

Make sure that the external connector(s) is (are) not connected to the aircraft
receptacle(s) EXT PW.

(b)

Make sure that there is (are) warning notice(s) on the external power receptacle to
tell persons not to connect an external power source.

(c)

Make sure that the EMER EXIT LT pushbutton switch on 25VU is on the OFF
position.

(d)

In the cockpit, on the overhead panel 35VU release the BAT pushbutton switches.

(e)

Put a warning notice on the panel 35VU to tell persons not to operate the batteries.

(f)

Put a warning notice on the refuel/defuel panel 800VU to tell persons not to operate
the NORMAL BATTERY switch.

(g)

Put a warning notice in the cockpit to tell persons not to start the Auxiliary Power
Unit (APU).

(h)

Put a warning notice in the cockpit to tell persons not to start the ENG1, 2.

(i)

Battery de-connection :
1

For the job set-up, refer to the removal of the batteries, refer to AMM Task
24-38-51-000-001.

Turn the knurled nut a quarter turn.

Disconnect the connectors.

Put blanking caps on the disconnected electrical connectors.

Subtask 321346-941-002-001 - Preparation Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 136
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

(a)

Do the preparation procedure as specified in the removal of the Generator Control


Units 1 and 2 (GCU 1 and 2) FIN 1XU1 and 1XU2 (if installed), refer to AMM Task
24-22-34-000-001.

(b)

Do the preparation procedure as specified in the removal of the GCU APU FIN 1XS
(if installed), refer to AMM Task 24-23-34-000-001.

(c)

Do the preparation procedure as specified in the removal of the Spoiler Elevator


Computer 3 (SEC 3) FIN 1CE3 (if installed), refer to AMM Task 27-94-34-000-001.

(d)

Do the preparation procedure as specified in the removal of the zone controller FIN
8HK (if installed), refer to AMM Task 21-63-34-000-001.

(e)

Do the preparation procedure as specified in the removal of the LGCIU 1 and 2 FIN
5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-000-001.

(f)

Do the preparation procedure as specified in the removal of the Tire Pressure


Indicating Computer (TPIS) detection unit FIN 2GV (if installed), refer to AMM Task
32-49-34-000-001.

(g)

Do the preparation procedure as specified in the removal of the Smoke Detection


Control Unit (SDCU) FIN 10WQ (if installed), refer to AMM Task 26-17-34-000-001.

(h)

Do the preparation procedure as specified in the removal of the Braking/Steering


Control Unit (BSCU) FIN 10GG (if installed), refer to AMM Task 32-42-34-000-001.

(i)

Do the preparation procedure as specified in the removal of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-000-002.

(j)

Do the preparation procedure as specified in the removal of the Auxiliary Fuel


Management Computer (AFMC) FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 137
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
C.

PROCEDURE

**CONF 002
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :

Screw

Item (33)

Retain

Washer

Item (34)

Retain

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 138
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Retain the hardware.

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 139
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

DATE: Dec 04/08

KEYWORD

SEE
NOTES

Set

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 140
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-002 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A03R01
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312197A00

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

SEE
NOTES

References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 141
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FADAA
Sheet 01
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Sheet 01
Modification of the Wiring in the C/B
Sheet 02
Panel 121VU
Sheet 03
(a)

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Circuit Breaker
2

FIN 59GA
1

At position R32, install :

Item 1

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

Item 1

At position R33, install :

Circuit Breaker
3

NSA931324-075

Remove :

Placard

002053-07

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 142
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

100
100
2

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 143
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A11R00
ITEM NEW PART N

QTY (UM)

D9000095224595

KEYWORD

SEE
NOTES

Bundle

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

Sheet 01
Sheet 02

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1
7

Resistor

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 144
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

D9100095213795

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 145
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

(Service

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

SEE
NOTES

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 146
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle
(b)

Sheet 01
Sheet 02

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25

1
6
8
8
2

Plate
Screw
Washer
Nut
Mount

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 147
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

26

NSA5515-11

Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 148
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 149
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01
Sheet 02

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

(9)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 150
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 151
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

Sheet 01

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 152
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 153
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 154
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 155
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)
All these items were retained at the removal.

NOTE:

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 156
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


Install the shelf and connect the bonding straps.
NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

(c)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 157
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 003
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 158
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 159
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 160
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-002 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

C/B
Button
Button
Bundle
Set
Tie
Tie

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

50
50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 161
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A03R01
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

D11312197A00

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Sheet 01

Remove :

Placard

002053-07

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312197A00

Item 2

ASNA2080G01

Item 3

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 162
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

or
5

Button-Rivet Plastic
(c)

ASNA2080G04

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Item 4

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395

1
3
1

Base
Nut
Module
Bundle

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 163
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM
Kit 321346A11R00
ITEM NEW PART N

QTY (UM)

KEYWORD

100
100
2

Set
Tie
Tie
Module

QTY (UM)

KEYWORD

D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 164
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Item 16

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set

D9100095213795

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 165
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

(Service

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 166
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-002 - Modify the Equipment in the Shelf 91VU

Zone
120

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 167
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
35
36
37
38

1
6
8
8
2
2
1
2
1

Plate
Screw
Washer
Nut
Mount
Screw
CNCTR
BACKSHLL
CNCTR

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NAS1801-3-10
EN3646A61210BW
ABS0638A12
EN3646A61210BN

SEE
NOTES

References
Fig. A-FAFAB
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)
1

Remove as shown in Fig. A-FAFAB Sheet 01 detail B :


Plate-Assy

D9251247600000

Item (18)

Discard

D9251102600000

Item (19)

Discard

or
1

Plate-Assy
attached with :

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 168
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)
1

Install as shown in Fig. A-FAFAB Sheet 02detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

NOTE:

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(c)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail D :


Mount

NSA935504-01

Item 25

attach with :
1

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(d)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail E :


Mount

NSA935504-01

Item 25

attach with :

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 169
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

SEE
NOTES

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 170
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

SEE
NOTES

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 171
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10

Zone
120

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)
2
7

Sheet 01

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :
Screw

NAS1801-3-8

DATE: Dec 04/08

Item 22
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 172
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAAAA
Location of the Working Area

DATE: Dec 04/08

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 173
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBGAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Rear Panel 120VU and the FWD
Electronics Rack 90VU
(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9000095223395
7

DATE: Dec 04/08

KEYWORD

SEE
NOTES

Bundle
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 174
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

SEE
NOTES

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 175
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 176
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


Install the shelf and connect the bonding straps.
NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

(c)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 177
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 004
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 178
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 179
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 180
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-002 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

C/B
Button
Button
Bundle
Set
Tie
Tie

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

50
50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 181
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A03R01
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

D11312197A00

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Sheet 01

Remove :

Placard

002053-07

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312197A00

Item 2

ASNA2080G01

Item 3

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 182
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

or
5

Button-Rivet Plastic
(c)

ASNA2080G04

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Item 4

Subtask 321346-831-003-002 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395

1
3
1

Base
Nut
Module
Bundle

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 183
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM
Kit 321346A11R00
ITEM NEW PART N

QTY (UM)

KEYWORD

100
100
2

Set
Tie
Tie
Module

QTY (UM)

KEYWORD

D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAB
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAB Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 184
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove from position 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position A30, as shown in Fig. A-FAEAB Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAB Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Item 16

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set

D9100095213795

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 185
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

(Service

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 186
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 187
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 188
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

NOTE:

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 189
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

Sheet 01

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 190
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

Sheet 01
Sheet 02

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 191
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

DATE: Dec 04/08

SEE
NOTES

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 192
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9000095223395
7

DATE: Dec 04/08

KEYWORD

SEE
NOTES

Bundle
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 193
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

DATE: Dec 04/08

Door 811, Door 822


Electrical panel 91VU

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 194
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 195
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 196
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001
(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

DATE: Dec 04/08

FIN

1CE3

(if

removed),

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 197
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 005
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1
7

Remove as shown in detail B :


Panel-RH Lateral

DATE: Dec 04/08

Item (28)

Retain

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 198
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001
(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 199
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

Retain the hardware.

Retain the hardware.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 200
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-002 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 201
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A03R01
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312197A00

Elec. Std. Practices Manual (ESPM)

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Sheet 01

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

Remove :

Placard

002053-07

Item (2)

Discard

attached with :
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 202
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Button-Rivet Plastic

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

or
5

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-002 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

D9000095223395

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 203
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAB
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAB Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 204
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position A30, as shown in Fig. A-FAEAB Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 205
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAB Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 206
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding
(c)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

E0425A2001

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 207
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-002 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
35
36
37
38

1
6
8
8
2
2
1
2
1

Plate
Screw
Washer
Nut
Mount
Screw
CNCTR
BACKSHLL
CNCTR

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NAS1801-3-10
EN3646A61210BW
ABS0638A12
EN3646A61210BN

SEE
NOTES

References
Fig. A-FAFAB
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)
1

Remove as shown in Fig. A-FAFAB Sheet 01 detail B :


Plate-Assy

D9251247600000

Item (18)

Discard

or
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 208
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Plate-Assy

D9251102600000

Item (19)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(b)
1

Install as shown in Fig. A-FAFAB Sheet 02detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

NOTE:

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(c)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail D :


Mount

NSA935504-01

Item 25

attach with :

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 209
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail E :


Mount

NSA935504-01

Item 25

attach with :
1

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

Sheet 01

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 210
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

SEE
NOTES

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 211
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

DATE: Dec 04/08

SEE
NOTES

Sheet 01

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 212
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FHFAA
Sheet 01
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment
(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 213
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

DATE: Dec 04/08

Door 811, Door 822


Electrical panel 91VU
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 214
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 215
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 216
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001
(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

DATE: Dec 04/08

FIN

1CE3

(if

removed),

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 217
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 007
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1
7

Remove as shown in detail B :


Panel-RH Lateral

DATE: Dec 04/08

Item (28)

Retain

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 218
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001
(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 219
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

Retain the hardware.

Retain the hardware.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 220
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-003 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 221
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A04R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11311610A00

Elec. Std. Practices Manual (ESPM)

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Sheet 01

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

Remove :

Placard

723-1080-12

Item (2)

Discard

attached with :
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 222
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Button-Rivet Plastic

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11311610A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

or
5

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

D9000095223395

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 223
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 224
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 225
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 226
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding
(c)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

E0425A2001

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 227
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

Discard the attachment parts.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 228
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)
1

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

NAS1801-3-13

Item 27

and
1

Clamp
attach with :

Screw

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 229
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU

DATE: Dec 04/08

SEE
NOTES

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 230
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBDAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 93VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 231
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FAGAA
Sheet 01
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 94VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03

50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 232
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

50

Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

NSA935401-05

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

SEE
NOTES

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 233
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle
(c)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 234
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 235
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console
7

Item (32)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 236
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 237
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(c)

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 008
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 238
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 239
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 240
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
Retain the hardware.

NOTE:
(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 241
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

Subtask 321346-831-002-003 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A04R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11311610A00

Elec. Std. Practices Manual (ESPM)

Sheet 01

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

At position R32, install :

Circuit Breaker

DATE: Dec 04/08

NSA931324-075

Item 1

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 242
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
FIN 59GA
1

At position R33, install :

Circuit Breaker
3

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

NSA931324-075

Remove :

Placard

723-1080-12

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11311610A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 243
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

SEE
NOTES

SEE
NOTES

Bundle

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU

DATE: Dec 04/08

Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 244
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the relay 48GA.


1

FIN 48GA
1

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

E0217XUU001A2

DATE: Dec 04/08

Item 13

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 245
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 62GAA
1
Base

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

D9100095213795

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact
3

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 246
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 247
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-002 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
35
36
37
38

1
6
8
8
2
2
1
2
1

Plate
Screw
Washer
Nut
Mount
Screw
CNCTR
BACKSHLL
CNCTR

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NAS1801-3-10
EN3646A61210BW
ABS0638A12
EN3646A61210BN

SEE
NOTES

References
Fig. A-FAFAB
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 248
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)
1

Remove as shown in Fig. A-FAFAB Sheet 01 detail B :


Plate-Assy

D9251247600000

Item (18)

Discard

D9251102600000

Item (19)

Discard

or
1

Plate-Assy
attached with :

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(b)
1

Install as shown in Fig. A-FAFAB Sheet 02detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

NOTE:

Install at the rear of the new LGCIU plate Item 21 :

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 249
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail D :


Mount

NSA935504-01

Item 25

attach with :
1

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(d)
1

Install as shown in Fig. A-FAFAB Sheet 02 detail E :


Mount

NSA935504-01

Item 25

attach with :
1

Screw

NAS1801-3-10

Item 35

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 250
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FAGAA
Sheet 01
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 93VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 251
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 252
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Tie
Tie

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

Sheet 01

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 253
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle
(c)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 254
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 255
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console
7

Item (32)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 256
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 257
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(c)

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 009
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 258
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 259
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 260
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
Retain the hardware.

NOTE:
(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 261
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

Subtask 321346-831-002-004 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A05R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312093A00

Elec. Std. Practices Manual (ESPM)

Sheet 01

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

At position R32, install :

Circuit Breaker

DATE: Dec 04/08

NSA931324-075

Item 1

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 262
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
FIN 59GA
1

At position R33, install :

Circuit Breaker
3

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

NSA931324-075

Remove :

Placard

D11311369A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312093A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 263
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

SEE
NOTES

SEE
NOTES

Bundle

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU

DATE: Dec 04/08

Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 264
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the relay 48GA.


1

FIN 48GA
1

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

E0217XUU001A2

DATE: Dec 04/08

Item 13

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 265
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 62GAA
1
Base

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

D9100095213795

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact
3

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 266
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 267
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

Fig. A-FAFAA
Modification of the Equipment in the
Shelf 91VU

DATE: Dec 04/08

SEE
NOTES

References
Sheet 01
Sheet 02

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 268
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 269
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 203VCA1
1
Backshell-Connector
(d)
1

ABS0638A12

Item 37

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 270
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

SEE
NOTES

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 271
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 272
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

(d)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 273
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 274
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 275
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 276
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 277
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

AMM Task

Install the shelf 93VU.


1

(c)

refer to

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 278
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 010
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 279
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001
(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

Retain the hardware.

Retain the hardware.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 280
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 281
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-005 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A06R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312090A00

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
7

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02
Sheet 03
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 282
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Circuit Breaker
2

FIN 59GA
1

At position R32, install :

Item 1

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

Item 1

At position R33, install :

Circuit Breaker
3

NSA931324-075

Remove :

Placard

D11311500A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312090A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 283
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

SEE
NOTES

Bundle
References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 284
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

References
Sheet 01
Sheet 02

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module

DATE: Dec 04/08

Item (11)

Discard

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 285
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

4
2

Install in replacement at positions 9 and 10 :

Module-False
(c)

Install the relay 62GA.


1

FIN 62GA
1

NSA937901FM

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

D9100095213795

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
7

DATE: Dec 04/08

25531J1557

(Service

Bulletin

No.

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 286
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Socket-Contact

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

Socket-Contact

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

SEE
NOTES

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.

References
Elec. Std. Practices Manual (ESPM)
20-52-21

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 287
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle
(b)

References
Sheet 01
Sheet 02

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 288
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

27
36
37
38

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 289
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 290
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01
Sheet 02

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

(9)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 291
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 292
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

Sheet 01

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 293
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 294
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 295
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 296
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)
All these items were retained at the removal.

NOTE:

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 297
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


Install the shelf and connect the bonding straps.
NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

(c)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 298
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 011
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 299
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 300
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 301
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-006 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

C/B
Button
Button
Bundle
Set
Tie
Tie

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

50
50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 302
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A07R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

D11311641A00

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Sheet 01

Remove :

Placard

D11311515A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11311641A00

Item 2

ASNA2080G01

Item 3

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 303
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

or
5

Button-Rivet Plastic
(c)

ASNA2080G04

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagram Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Item 4

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395

1
3
1

Base
Nut
Module
Bundle

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 304
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM
Kit 321346A11R00
ITEM NEW PART N

QTY (UM)

KEYWORD

100
100
2

Set
Tie
Tie
Module

QTY (UM)

KEYWORD

D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 305
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Item 16

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set

D9100095213795

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 306
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

(Service

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 307
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 308
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 309
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

NOTE:

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 310
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

Sheet 01

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 311
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU
Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

Sheet 01
Sheet 02

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 312
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

DATE: Dec 04/08

SEE
NOTES

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 313
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9000095223395
7

DATE: Dec 04/08

KEYWORD

SEE
NOTES

Bundle
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 314
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

DATE: Dec 04/08

Door 811, Door 822


Electrical panel 91VU

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 315
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 316
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 317
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001
(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

DATE: Dec 04/08

FIN

1CE3

(if

removed),

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 318
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 012
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1
7

Remove as shown in detail B :


Panel-RH Lateral

DATE: Dec 04/08

Item (28)

Retain

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 319
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001
(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 320
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

Retain the hardware.

Retain the hardware.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 321
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-007 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 322
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A08R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312094A00

Elec. Std. Practices Manual (ESPM)

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Sheet 01

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

Remove :

Placard

D11311513A00

Item (2)

Discard

attached with :
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 323
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Button-Rivet Plastic

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312094A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

or
5

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

D9000095223395

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 324
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 325
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 326
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 327
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding
(c)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

E0425A2001

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 328
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

Discard the attachment parts.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 329
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)
1

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

NAS1801-3-13

Item 27

and
1

Clamp
attach with :

Screw

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 330
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU

DATE: Dec 04/08

SEE
NOTES

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 331
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBDAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 93VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 332
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FAGAA
Sheet 01
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 94VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03

50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 333
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

50

Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

NSA935401-05

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

(b)

SEE
NOTES

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 334
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle
(c)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 335
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 336
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console
7

Item (32)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 337
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 338
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(c)

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 013
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 339
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 340
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Retain the hardware.

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 341
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
Retain the hardware.

NOTE:
(3)

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 342
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(4)

Subtask 321346-831-002-008 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A09R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312095A00

Elec. Std. Practices Manual (ESPM)

Sheet 01

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

SEE
NOTES

At position R32, install :

Circuit Breaker

DATE: Dec 04/08

NSA931324-075

Item 1

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 343
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

2
FIN 59GA
1

At position R33, install :

Circuit Breaker
3

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

NSA931324-075

Remove :

Placard

D11311307A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312095A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagram Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle
3

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 344
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

SEE
NOTES

SEE
NOTES

Bundle

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU

DATE: Dec 04/08

Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 345
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the relay 48GA.


1

FIN 48GA
1

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

E0217XUU001A2

DATE: Dec 04/08

Item 13

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 346
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 62GAA
1
Base

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

D9100095213795

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact
3

(Service

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 347
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU


Work Zones and Access Panels
Access/Work location
Access
Door 811
Work location
Electrical panel 94VU

Zone
120

Manpower Resources
Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

SEE
NOTES

D9000095223395

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 348
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

Fig. A-FAFAA
Modification of the Equipment in the
Shelf 91VU

DATE: Dec 04/08

SEE
NOTES

References
Sheet 01
Sheet 02

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 349
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 350
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 203VCA1
1
Backshell-Connector
(d)
1

ABS0638A12

Item 37

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 351
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

SEE
NOTES

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 352
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 353
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

(d)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 354
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 355
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 356
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 357
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:

All these items were retained at the removal.

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 358
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

AMM Task

Install the shelf 93VU.


1

(c)

refer to

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 359
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 014
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console
attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 360
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001
(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Remove the shelf 93VU.


1

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

Retain the hardware.

Retain the hardware.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 361
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Subtask 321346-831-001-001 - Install the New Grounding Points in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAA
Sheet 01
Installation of the New Grounding Points Sheet 02
at FR10 in AVNCS Compartment
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 362
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Drill 2 holes on the structure at FR10 to the dimensions given in Fig. A-FACAA
Sheet 01 and Fig. A-FACAA Sheet 02.

(b)

Do 2 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAA Sheet 02.

(c)

Near the new holes, as shown in Fig. A-FACAA Sheet 02, bond the placards
identified 1037VN and 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-009 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

50
50

C/B
Button
Button
Bundle
Set
Tie
Tie

Kit 321346A10R00
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

D11312091A00

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
7

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02
Sheet 03
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 363
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Circuit Breaker
2

FIN 59GA
1

At position R32, install :

Item 1

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set
(b)

Item 1

At position R33, install :

Circuit Breaker
3

NSA931324-075

Remove :

Placard

D11312004A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312091A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic
or

Button-Rivet Plastic
(c)

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 364
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Subtask 321346-831-003-001 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM

1
3
1

100
100
2

Base
Nut
Module
Bundle
Set
Tie
Tie
Module

QTY (UM)

KEYWORD

Kit 321346A11R00
ITEM NEW PART N
D9000095224595

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

SEE
NOTES

Bundle
References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 365
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Fig. A-FAEAA
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

References
Sheet 01
Sheet 02

Remove as shown in Fig. A-FAEAA Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor
2

Remove from position 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAA Sheet 01 :

FIN 217VT91
1
Plate-Module

DATE: Dec 04/08

Item (11)

Discard

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 366
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

4
2

Install in replacement at positions 9 and 10 :

Module-False
(c)

Install the relay 62GA.


1

FIN 62GA
1

NSA937901FM

Install at position B23, as shown in Fig. A-FAEAA Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

D9100095213795

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAA Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set
(e)

Item 16

D9100095213795

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and Fig. A-FBBAA Sheet 03 and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
7

DATE: Dec 04/08

25531J1557

(Service

Bulletin

No.

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 367
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Socket-Contact

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

Socket-Contact

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

SEE
NOTES

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.

References
Elec. Std. Practices Manual (ESPM)
20-52-21

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 368
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle
(b)

References
Sheet 01
Sheet 02

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-001 - Modify the Equipment in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 369
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

27
36
37
38

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

SEE
NOTES

References
Fig. A-FAFAA
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
(a)

Disconnect the draining pipe from the blanking plate Item (17).
NOTE:

(b)
1

Discard the attachment parts.

Remove as shown in Fig. A-FAFAA Sheet 01 detail B :


Plate-Assy

D9251335500000

Item (17)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 370
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAA Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 371
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBDAA
Modification of the Wiring between the
Shelves 91VU and 93VU
(a)

Sheet 01
Sheet 02

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

(9)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 372
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Modification of the Wiring between the
Shelves 91VU and 94VU
(a)

SEE
NOTES

Sheet 01

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-001 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 373
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03
NSA935401-05

50
50

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FAGAA
Modification of the Routing behind the
Shelf 91VU
Fig. A-FWFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FHFAA
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Install the wires as shown on the wiring diagram Fig. A-FWFAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAA Sheet 01, supplied in :

Bundle
(b)

Sheet 01

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAA Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 374
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Together with the new wires, install the identification plates 1037VN and 1039VN,
supplied in :
Bundle

D9000095223395

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 375
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 376
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

(a)

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 377
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)
All these items were retained at the removal.

NOTE:

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 378
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


Install the shelf and connect the bonding straps.
NOTE:

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

FIN

1CE3

(if

removed),

refer

to

refer to

AMM

Task

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

(c)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

DATE: Dec 04/08

refer to

AMM Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 379
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF 015
(1)

Subtask 321346-010-002-001 - Remove the Equipment for Access in the Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Remove as shown in detail B :


Panel-RH Lateral

Item (28)

Retain

attached with :
1

Screw

Item (29)

Retain

Nut

Item (30)

Retain

Screw

Item (31)

Retain

Item (32)

Retain

(b)

Remove as shown in detail C :

FIN 702VU
1
Console

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 380
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with :
4

Screw

Item (33)

Retain

Washer

Item (34)

Retain

(2)

Subtask 321346-010-003-001 - Remove the Equipment for Access in the Avionics


Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Panel 90VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

AIRFRAME

Aircraft Maintenance Manual (AMM)

(a)

Remove the shelf 91VU.


1

Remove and retain the GCU 1 and 2 FIN 1XU1 and 1XU2 (if installed), refer
to AMM Task 24-22-34-000-001.

Remove and retain the GCU APU FIN 1XS (if installed), refer to AMM Task
24-23-34-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(b)

Retain the hardware.

Remove the shelf 93VU.


1

References
Task 21-43-34-000-002
Task 21-63-34-000-001
Task 24-22-34-000-001
Task 24-23-34-000-001
Task 26-17-34-000-001
Task 27-94-34-000-001
Task 28-51-35-000-001
Task 32-31-71-000-001
Task 32-42-34-000-001
Task 32-49-34-000-001

Remove and retain the SEC 3 FIN 1CE3 (if installed), refer to AMM Task
27-94-34-000-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 381
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove and retain the zone controller FIN 8HK (if installed), refer to AMM
Task 21-63-34-000-001.

Remove and retain the LGCIU 1 FIN 5GA1 (if installed), refer to AMM Task
32-31-71-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(c)

Remove the shelf 94VU.


1

Remove and retain the LGCIU 2 FIN 5GA2 (if installed), refer to AMM Task
32-31-71-000-001.

Remove and retain the TPIS detection unit FIN 2GV (if installed), refer to
AMM Task 32-49-34-000-001.

Remove and retain the SDCU FIN 10WQ (if installed), refer to AMM Task
26-17-34-000-001.

Remove and retain the BSCU FIN 10GG (if installed), refer to AMM Task
32-42-34-000-001.

Remove and retain the aft cargo heat controller FIN 10HC (if installed), refer
to AMM Task 21-43-34-000-002.

Remove and retain the AFMC FIN 2QN (if installed), refer to AMM Task
28-51-35-000-001.

Disconnect the shelf cut-off connectors and install protective caps.

Disconnect the bonding strap and remove the shelf from the aircraft.
NOTE:

(3)

Retain the hardware.

Retain the hardware.

Subtask 321346-831-001-002 - Install the New Grounding Point in the Avionics


Compartment at FR10

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811, Door 812
Work location
Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

AIRFRAME

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 382
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

D9100095213795

KEYWORD

SEE
NOTES

Set

References
Fig. A-FACAB
Sheet 01
Installation of the New Grounding Point Sheet 02
at FR10 in AVNCS Compartment
(a)

Drill 1 hole on the structure at FR10 to the dimensions given in Fig. A-FACAB
Sheet 01 and Fig. A-FACAB Sheet 02.

(b)

Do 1 stripping dia. 14 mm (0.551 in.) as shown in Fig. A-FACAB Sheet 02.

(c)

Near the new hole, as shown in Fig. A-FACAB Sheet 02, bond the placard
identified 1039VN, supplied in:
Placard Set

(4)

D9100095213795

Subtask 321346-831-002-002 - Modify the Equipment and the Wiring in the C/B
Panel 121VU

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 121VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

1
3
4

2
5
5

C/B
Button
Button
Bundle
Set
Tie
Tie

NSA931324-075
ASNA2080G01
ASNA2080G04
D9000095223395
D9100095213795
NSA935401-03
NSA935401-05

50
50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 383
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Kit 321346A03R01
ITEM NEW PART N

QTY (UM)

KEYWORD

Placard

D11312197A00

SEE
NOTES

References
Elec. Std. Practices Manual (ESPM)
20-52-21
Fig. A-FADAA
Modification of the Equipment in the C/B
Panel 121VU
Fig. A-FBAAA
Modification of the Wiring in the C/B
Panel 121VU
(a)

At position R32, install :

Circuit Breaker
2

FIN 59GA
1

Item 1

NSA931324-075

Item 1

Near the new C/B, bond the placards identified 58GA and 59GA, supplied in :

Placard Set

D9100095213795

Replace the placard 31LM (line R).


1

FIN 31LM
1

NSA931324-075

At position R33, install :

Circuit Breaker
3

(b)

Sheet 01
Sheet 02
Sheet 03

Install the C/B 58GA and 59GA.


1

FIN 58GA
1

Sheet 01

Remove :

Placard

002053-07

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

D11312197A00

Item 2

ASNA2080G01

Item 3

attached with :
5

Button-Rivet Plastic
or

Button-Rivet Plastic
2

FIN 31LM
1

Install :

Placard
attach with :

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 384
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

or
5

Button-Rivet Plastic
(c)

ASNA2080G04

Modify the wiring.


1

Modify the connections of the wires as shown on the wiring diagram Fig. AFBAAA Sheet 01 and as given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBAAA Sheet 03.

Install the wires as shown on the wiring diagrams Fig. A-FBAAA Sheet 01 and
Fig. A-FBAAA Sheet 02 and as given in the hook-up chart lines :
-

8 thru 13, refer to Fig. A-FBAAA Sheet 03, supplied in :

Bundle

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(5)

Item 4

Subtask 321346-831-003-002 - Modify the Equipment and the Wiring in the Shelf
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 93VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

13

E0217XUU001A2

Relay

14
15
16

E0219ASXUU
MS21042-04
E0425A2001
D9000095223395

1
3
1

Base
Nut
Module
Bundle

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 385
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N


D9100095213795
NSA935401-03
NSA935401-05
NSA937901FM
Kit 321346A11R00
ITEM NEW PART N

QTY (UM)

KEYWORD

100
100
2

Set
Tie
Tie
Module

QTY (UM)

KEYWORD

D9000095224595

Elec. Std. Practices Manual (ESPM)


Fig. A-FAEAB
Modification of the Equipment in the
Shelf 93VU
Fig. A-FBBAA
Modification of the Wiring in the Shelf
93VU
(a)

SEE
NOTES

Bundle
References
20-52-21
Sheet 01
Sheet 02
Sheet
Sheet
Sheet
Sheet

01
02
03
04

Remove the relay 48GA.


1

FIN 48GA
1

SEE
NOTES

Remove as shown in Fig. A-FAEAB Sheet 01 :

Relay

Item (5)

Discard

FIN 48GAA
1
Base

Item (6)

Discard

FIN 48GAA8
1
Retainer Assy

Item (7)

Discard

2
(b)

Remove the placard identified 48GA.

Modify the terminal block 217VT.


1

Remove from position 9, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT9
1
Module

Item (10)

Discard

Item (9)

Discard

and
FIN 57GA
1

Capacitor

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 386
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Remove from position 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT10
1
Module

Item (12)

Discard

Item (8)

Discard

and
FIN 56GA
1

Resistor
3

Remove between positions 9 and 10, as shown in Fig. A-FAEAB Sheet 01 :

FIN 217VT91
1
Plate-Module
4
2

NSA937901FM

Install the relay 62GA.


1

FIN 62GA
1

Discard

Install in replacement at positions 9 and 10 :

Module-False
(c)

Item (11)

Install at position A30, as shown in Fig. A-FAEAB Sheet 02 :

Relay

FIN 62GAA
1
Base

E0217XUU001A2

Item 13

E0219ASXUU

Item 14

MS21042-04

Item 15

attach with :
3

Nut
2

Near the new relay, bond the placard identified 62GA, supplied in :

Placard Set
(d)

If not installed, install the grounding module 679VG.


1

Install as shown in Fig. A-FAEAB Sheet 02 :

FIN 679VG
1
Module-Grounding
2

E0425A2001

Item 16

Near the new grounding module, bond the placard identified 679VG, supplied
in :

Placard Set

D9100095213795

DATE: Dec 04/08

D9100095213795

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 387
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Modify the wiring.


1

Remove the wires as shown on the wiring diagram Fig. A-FBBAA Sheet 01
and as given in the hook-up chart lines :
-

1 thru 13, refer to Fig. A-FBBAA Sheet 04.

Install the wires as shown on the wiring diagrams Fig. A-FBBAA Sheet 02 and
Fig. A-FBBAA Sheet 03 and as given in the hook-up charts lines :
-

17 thru 23, refer to Fig. A-FBBAA Sheet 04

Bundle

D9000095223395

Bundle

D9000095224595

NOTE:

For connection of wire No. 3231-0487 to relay 53GA:

For aircraft on which MOD No.


A320-32-1165) is not embodied, use:
1

Socket-Contact

Socket-Contact

Bulletin

No.

25531J1557

(Service

Bulletin

No.

EN3155-017F1216

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

(6)

(Service

EN3155-017F1616

For aircraft on which MOD No.


A320-32-1165) is embodied, use:
1

25531J1557

Subtask 321346-831-004-001 - Modify the Wiring in the Shelf 94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 94VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

ELECTRICAL

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 388
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05

QTY (UM)

KEYWORD

50
50

Bundle
Tie
Tie

QTY (UM)

KEYWORD

Module

SEE
NOTES

Component COMPA01
ITEM NEW PART N
E0425A2001
NOTE:

The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
References
20-52-21

Elec. Std. Practices Manual (ESPM)


Fig. A-FBCAA
Modification of the Wiring in the Shelf
94VU
(a)

1, refer to Fig. A-FBCAA Sheet 02, supplied in :

Bundle

D9000095223395

If not installed, install near 652VG :

FIN 654VG
1
Module-Grounding

E0425A2001

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(7)

Subtask 321346-831-005-004 - Modify the Equipment in the Shelf 91VU

Zone
120

Sheet 01
Sheet 02

Install the wire as shown on the wiring diagram Fig. A-FBCAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

SEE
NOTES

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 389
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Manpower Resources
Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

21
22
23
24
25
26

D9251719400095
NAS1801-3-8
NAS1149F0332P
NSA5050-3
NSA935504-01
NSA5515-11

1
6
8
8
2
2

Plate
Screw
Washer
Nut
Mount
Clamp

27
36
37
38

NAS1801-3-13
EN3646A61210BW
ABS0638A12
EN3646A61210BN

2
1
2
1

Screw
CNCTR
BACKSHLL
CNCTR

SEE
NOTES

References
Fig. A-FAFAD
Sheet 01
Modification of the Equipment in the
Sheet 02
Shelf 91VU
Fig. A-FBJAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBKAA
Sheet 01
Wiring Diagram of the New LGCIU Plate
(For Information Only)
Fig. A-FBLAA
Modification of the Wiring in the Shelf
91VU

(a)

Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06

Modify the connections of the wires as shown on the wiring diagrams Fig. A-FBLAA
Sheet 01, Fig. A-FBLAA Sheet 02, Fig. A-FBLAA Sheet 03 and Fig. A-FBLAA
Sheet 04 and as given in the hook-up charts lines :
-

1 thru 24, refer to Fig. A-FBLAA Sheet 05

1 thru 16, refer to Fig. A-FBLAA Sheet 06.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 390
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)
1

Remove as shown in Fig. A-FAFAD Sheet 01 detail B :


Plate-Assy 4MCU

Item (20)

Discard

attached with :
6

Screw

Item (22)

Discard

Washer

Item (23)

Discard

Nut

Item (24)

Discard

(c)
1

Install as shown in Fig. A-FAFAD Sheet 02 detail C :


Plate-LGCIU

D9251719400095

Item 21

attach with :
6

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

NOTE:

For the internal wiring of the LGCIU plate, refer to Fig. A-FBJAA
Sheet 01 and Fig. A-FBKAA Sheet 01.

Install at the rear of the new LGCIU plate Item 21 :


FIN 201VCA
1
Connector-Plug

EN3646A61210BW Item 36

FIN 201VCA1
1
Backshell-Connector

ABS0638A12

Item 37

FIN 203VCA
1
Connector-Plug

EN3646A61210BN

Item 38

FIN 203VCA1
1
Backshell-Connector

ABS0638A12

Item 37

(d)
1

Install as shown in Fig. A-FAFAD Sheet 02 detail D :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

NAS1801-3-13

Item 27

and
1

Clamp
attach with :

Screw

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 391
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(e)
1

Install as shown in Fig. A-FAFAD Sheet 02 detail E :


Mount

NSA935504-01

Item 25

NSA5515-11

Item 26

and
1

Clamp
attach with :

Screw

NAS1801-3-13

Item 27

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(8)

Subtask 321346-831-006-001 - Modify the Wiring between the Shelves 91VU and
93VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
93VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

Fig. A-FAGAB
Modification of the Routing behind the
Shelf 91VU

DATE: Dec 04/08

SEE
NOTES

Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 392
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FBDAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 93VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBDAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 3, refer to Fig. A-FBDAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(9)

Subtask 321346-831-007-001 - Modify the Wiring between the Shelves 91VU and
94VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Electrical panel
94VU
Manpower Resources

Manhours
Minimum number of person

2.00
1

Subtask elapsed time

2.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

DATE: Dec 04/08

SEE
NOTES

References
20-52-21

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 393
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Fig. A-FAGAB
Sheet 01
Modification of the Routing behind the
Shelf 91VU
Fig. A-FBEAA
Sheet 01
Modification of the Wiring between the
Sheet 02
Shelves 91VU and 94VU
(a)

Install the wires as shown on the wiring diagram Fig. A-FBEAA Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2, refer to Fig. A-FBEAA Sheet 02, supplied in :

Bundle

D9000095223395

(b)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(c)

Attach the wires with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

(10) Subtask 321346-831-008-002 - Modify the Wiring between the Shelf 91VU and the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
from Electrical panel 91VU to Frame 10
Manpower Resources

Manhours
Minimum number of person

1.00
1

Subtask elapsed time

1.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N

QTY (UM)

KEYWORD

22
23
24

2
2
2

Screw
Washer
Nut
Bundle
Tie

NAS1801-3-8
NAS1149F0332P
NSA5050-3
D9000095223395
NSA935401-03

50

DATE: Dec 04/08

SEE
NOTES

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 394
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

ITEM NEW PART N

QTY (UM)

KEYWORD

50

Tie

Elec. Std. Practices Manual (ESPM)

References
20-52-21

NSA935401-05

Fig. A-FAGAB
Modification of the Routing behind the
Shelf 91VU
Fig. A-FHFAB
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

Fig. A-FWFAB
Modification of the Wiring between the
Shelf 91VU and the AVNCS
Compartment

Sheet 01

(a)

Sheet 01

Install the wires as shown on the wiring diagram Fig. A-FWFAB Sheet 01 and as
given in the hook-up chart lines :
-

1 and 2 Fig. A-FHFAB Sheet 01, supplied in:

Bundle
(b)

SEE
NOTES

D9000095223395

Connect the bonding points, as shown in Fig. A-FAGAB Sheet 01, with :

Screw

NAS1801-3-8

Item 22

Washer

NAS1149F0332P

Item 23

Nut

NSA5050-3

Item 24

(c)

Attach the stowed wires with the new wires, as shown in Fig. A-FAGAB Sheet 01.

(d)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(e)

Attach the wires with :

50

Tie-Cable

NSA935401-03

50

Tie-Cable

NSA935401-05

(11) Subtask 321346-831-009-001 - Modify the Wiring between the Rear Panel 120VU
and the FWD Electronics Rack 90VU

From

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 395
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

To

120

Access
Work location

Door 811, Door 822


Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

100
100
100

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBGAA
Modification of the Wiring between the
Rear Panel 120VU and the FWD
Electronics Rack 90VU

Sheet 01
Sheet 02

Remove the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

(b)

1, refer to Fig. A-FBGAA Sheet 02.

Install the wire as shown on the wiring diagram Fig. A-FBGAA Sheet 01 and as
given in the hook-up chart line :
-

2, refer to Fig. A-FBGAA Sheet 02, supplied in :

Bundle

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

(c)

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

(d)

Attach the wire with :

100

Tie-Cable

NSA935401-03

100

Tie-Cable

NSA935401-05

100

Tie-Cable

NSA935401-08

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 396
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(12) Subtask 321346-831-010-001 - Modify the Wiring between the Rear Panel 120VU
and the Shelf 91VU

From

Zone
210

To

120

Work Zones and Access Panels


Access/Work location
Access
Door 831
Work location
Electrical panel 120VU
Access
Work location

Door 811, Door 822


Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

4.00
1

Subtask elapsed time

4.00

Skills

ELECTRICAL
Material necessary to do the job

Kit 321346A01R03
ITEM NEW PART N
D9000095223395
NSA935401-03
NSA935401-05
NSA935401-08

QTY (UM)

KEYWORD

300
300
300

Bundle
Tie
Tie
Tie

Elec. Std. Practices Manual (ESPM)

Sheet 01

Fig. A-FBHAA
Modification of the Wiring between the
Rear Panel 120VU and the Shelf 91VU

Sheet 01
Sheet 02

Install the wires as shown on the wiring diagram Fig. A-FBHAA Sheet 01 and as
given in the hook-up chart lines :
-

1 thru 4, refer to Fig. A-FBHAA Sheet 02, supplied in :

Bundle
(b)

D9000095223395

Together with the new wires, install the identification plates 201VC-A and 203VC-A,
supplied in :
Bundle

(c)

References
20-52-21

Fig. A-FAAAA
Location of the Working Area

(a)

SEE
NOTES

D9000095223395

Do a continuity test of the new and/or modified electrical wires, refer to ESPM
20-52-21.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 397
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(d)

Attach the wires with :

300

Tie-Cable

NSA935401-03

300

Tie-Cable

NSA935401-05

300

Tie-Cable

NSA935401-08

(13) Subtask 321346-410-002-001 - Install the Equipment Removed for Access in the
Cockpit

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

3.00
1

Subtask elapsed time

3.00

Skills

AIRFRAME

References
Fig. A-FABAA
Sheet 01
Removal/Installation of the Equipment in
the Cockpit (For Access)
(a)
1

Install as shown in detail B :


Panel-RH Lateral

Item (28)

attach with :
1

Screw

Item (29)

Nut

Item (30)

Screw

Item (31)

NOTE:
(b)

All these items were retained at the removal.

Install as shown in detail C :

FIN 702VU
1
Console

Item (32)

attach with :
4

Screw

Item (33)

Washer

Item (34)

NOTE:
7

All these items were retained at the removal.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 398
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(14) Subtask 321346-410-003-001 - Install the Equipment Removed for Access in the
Avionics Compartment

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 90VU
Manpower Resources

Manhours
Minimum number of person

5.00
1

Subtask elapsed time

5.00

Skills

AIRFRAME

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001
(a)

Install the shelf 91VU.


1

Install the shelf and connect the bonding straps.


NOTE:

(b)

Install the GCU 1 and 2 FIN 1XU1 and 1XU2 (if removed), refer to AMM Task
24-22-34-400-001.

Install the GCU APU FIN 1XS (if removed),


24-23-34-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 93VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Attach with the fasteners retained at removal.

Install the SEC


27-94-34-400-001.

Install the zone controller FIN 8HK (if removed), refer to AMM Task
21-63-34-400-001.

DATE: Dec 04/08

FIN

1CE3

(if

removed),

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 399
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Install the LGCIU 1 FIN 5GA1 (if removed),


32-31-71-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

refer to

AMM Task

Install the shelf 94VU.


1

Install the shelf and connect the bonding straps.


NOTE:

Attach with the fasteners retained at removal.

Install the LGCIU 2 FIN 5GA2 (if removed),


32-31-71-400-001.

refer to

AMM Task

Install the TPIS detection unit FIN 2GV (if removed), refer to AMM Task
32-49-34-400-001.

Install the SDCU


26-17-34-400-001.

FIN

10WQ

(if

removed),

refer

to

AMM

Task

Install the BSCU


32-42-34-400-001.

FIN

10GG

(if

removed),

refer

to

AMM

Task

Install the aft cargo heat controller FIN 10HC (if removed), refer to AMM Task
21-43-34-400-002.

Install the AFMC FIN 2QN (if removed), refer to AMM Task 28-51-35-400-001.

Remove the protective caps and connect the shelf cut-off connectors.

**CONF ALL
D.

TEST

**CONF 002
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 24-38-51-400-001
(a)

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 400
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 401
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001
(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 402
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 403
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(5)

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 404
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 405
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 406
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 407
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 408
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 003
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 409
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 410
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 411
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 412
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 413
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 414
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 415
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 416
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 417
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 004
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 418
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 419
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 420
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 421
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 422
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 423
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 424
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 425
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 426
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 005
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 427
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 428
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 429
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 430
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 431
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 432
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 433
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 434
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 435
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 007
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 436
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 437
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 438
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 439
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 440
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 441
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 442
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 443
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 444
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 008
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 445
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 446
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 447
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 448
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 449
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 450
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 451
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 452
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 453
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 009
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 454
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 455
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 456
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 457
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 458
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 459
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 460
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 461
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 462
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 010
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 463
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 464
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 465
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 466
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 467
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 468
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 469
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 470
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 471
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 011
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 472
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 473
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 474
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 475
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 476
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 477
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 478
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 479
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 480
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 012
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 481
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 482
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 483
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 484
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 485
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 486
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 487
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 488
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 489
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 013
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 490
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 491
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 492
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 493
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 494
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 495
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 496
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 497
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 498
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 014
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 499
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 500
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 501
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 502
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 503
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 504
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 505
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 506
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 507
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF 015
(1)

Subtask 321346-861-001-001 - Energize Electrical Network


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

(2)

References
Task 24-38-51-400-001

Battery re-connection :
1

For the job set-up, refer to the installation of the batteries, refer to AMM Task
24-38-51-400-001.

Remove the blanking cap(s) from the electrical connectors.

Make sure that the electrical connectors are clean and in correct condition.

Connect the connector on the battery.

Turn the knurled nut a quarter turn.

(b)

Remove all the warning notices.

(c)

Restore the systems and the aircraft to normal operating condition.

Subtask 321346-700-001-001 - Preliminary Tests


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 508
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

References
Task 21-26-00-710-001
Task 22-96-00-710-001
Task 22-97-00-710-001
Task 31-50-00-710-001
Task 31-50-00-710-004
Task 31-50-00-710-005
Task 31-60-00-710-001
Task 33-13-00-710-001
Task 33-14-00-710-001
Elec. Std. Practices Manual (ESPM)
20-52-10
Aircraft Maintenance Manual (AMM)

(a)

Preliminary tests
1

Initial conditions :
NOTE:

If the aircraft is operated in CAT3 conditions, you must


also do the Land CAT3 capability test, refer to AMM Task
22-97-00-710-001.

On each connectors that you disconnected, do a check as defined in


ESPM 20-52-10.
NOTE:

The functional test and/or operational test requested by


this ESPM procedure is given hereafter.

Do the operational test of the instrument and panel integral lighting, refer
to AMM Task 33-13-00-710-001.

Do the operational
33-14-00-710-001.

Do the operational test of the system via the Multipurpose Control and
Display Unit (MCDU), refer to AMM Task 21-26-00-710-001.

Do the operational test of the Automatic Flight System (AFS), refer to


AMM Task 22-96-00-710-001.

Do the operational test of the Electronic Instrument System (EIS), refer to


AMM Task 31-60-00-710-001.

Do the operational test of the Electronic Centralized Aircraft Monitoring


(ECAM) control panel, refer to AMM Task 31-50-00-710-004.

Do a ground scanning of the central warning system, refer to AMM Task


31-50-00-710-001.

DATE: Dec 04/08

test

of

the

lights,

refer

to

AMM

Task

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 509
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Test of the circuit breakers :


1

Do a voltage check at pin 1 of these C/B to make sure that there is 28VDC :

PANEL DESIGNATION

FIN

LOCATION

121

1WE1

43 Q

2WE1

44 Q

58GA
58GA
59GA
59GA

32
25
33
26

121
121
121
121
121

ENGINE/ENG1 AND 2 FIRE


EXTIG/BTL1/SQUIB/A
ENGINE/ENG1 AND 2 FIRE
EXTIG/BTL1/SQUIB/B
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS1
LGCIU/BAT SPLY/SYS2
LGCIU/BAT SPLY/SYS2
NOTE (1):

(3)

R
R
R
R

SEE
NOTES

(1)
(1)
(1)
(1)

The location of the circuit breakers depends on the aircraft


configuration.

Do the operational test of the Circuit Breaker Monitoring System (CBMS) for
the panel 121VU, refer to AMM Task 31-50-00-710-005.

Subtask 321346-700-002-001 - Testing


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

Tests after removal/installation of the shelves 91VU, 93VU and 94VU


1

References
Task 20-28-00-720-005
Task 21-43-00-710-003
Task 21-63-00-710-004
Task 24-41-00-740-002
Task 24-41-00-740-004
Task 26-16-00-710-001
Task 26-17-00-710-001
Task 27-94-00-710-001
Task 32-46-00-740-001
Task 32-49-00-720-001

Shelf 91VU
a

If equipped, do the operational test of the Ground Power Control Unit


(GPCU) FIN 1XG via Centralized Fault Display System (CFDS), refer to
AMM Task 24-41-00-740-004.

If equipped, do the operational test of the Ground and Auxiliary Power


Control Unit (GAPCU) FIN 24XG via CFDS, refer to AMM Task
24-41-00-740-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 510
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Shelf 93VU
a

Do the operational
27-94-00-710-001.

of

the

SEC

3,

refer

to

AMM

Task

Do the operational test of the cockpit and cabin temperature control with
CFDS/MCDU, refer to AMM Task 21-63-00-710-004.

Shelf 94VU.
a

If the aircraft is equipped with Tire Pressure Indicating System (TPIS)


Detection Unit (FIN 2GV), do the cross-check of TPIS reading and tire
pressure gauge, refer to AMM Task 32-49-00-720-001.

Do the operational test of the lavatory smoke-detection system, refer to


AMM Task 26-17-00-710-001.

Do the operational check of the cargo-compartment smoke-detection by


Push To Test (PTT), refer to AMM Task 26-16-00-710-001.

Do the Built-In Test Equipment (BITE) test of the Braking and Steering
Control Unit (BSCU), refer to AMM Task 32-46-00-740-001.

If the aircraft is equipped with the aft cargo heat controller (FIN 10HC) do
the operational test of the aft cargo-compartment heating system, refer to
AMM Task 21-43-00-710-003.

Test of the electrical bonding


1

Do the check of the electrical bonding, refer to AMM Task 20-28-00-720-005.


NOTE:

(4)

test

For the maximum permissible resistance values, refer to AMM


Task 20-28-00-720-005.

Subtask 321346-720-401-001 - Preparation


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(5)

References
32-00-00, Page Block 201

(a)

On the overhead panel 35VU switch the batteries ON.

(b)

On the overhead panel 35VU switch the external power ON.

(c)

Put the aircraft to Flight Configurations Precautions with Electrical Power, refer to
AMM 32-00-00, Page Block 201.

Subtask 321346-720-402-001 - Test of Battery Relief Relay 60GA


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 511
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Switch off LGCIU2:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
121VU

2GA
59GA

Q35
R33

LGCIU SYS 2
LGCIU SYS 2 BAT SPLY
(b)

SEE
NOTES

LGCIU1 only powered from ground supply:


Open

PANEL DESIGNATION

FIN

LOCATION

121VU
49VU

58GA
1GA

R32
C09

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


LGCIU SYS 1

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY


(c)

SEE
NOTES

On the ECAM Wheel page check that the indications that follow are displayed:
1

The MLG Left, MLG Right, Nose LG symbols on the right hand side on the
Wheel page are amber XX (crosses):
refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1
(Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).

(d)

Do a BITE TEST on the LGCIU1 from the MCDU, the result should be test OK,
refer to AMM Task 32-69-00-740-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 512
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(e)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 GND SPLY

SEE
NOTES

Check that the ECAM Wheel page shows all amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(f)

Close

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 01 and Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode
Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 04 and Fig. A-UBAAA Sheet 05 for EIS 2 (LCD
Screens).
(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU is on:


refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 for EIS 2 (LCD Screens).
(h)

Open

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 1

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 513
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(i)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

LGCIU SYS 1 BAT SPLY

SEE
NOTES

Check that the ECAM Wheel page remains the same as above, 1GA and 52GA are
already open at this stage:
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(6)

Subtask 321346-720-403-001 - Test of System 2 Battery Relief Relay 61GA


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


Fig. A-UBAAA
LGCIU Location and Display

(a)

References
Task 32-69-00-740-001
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet
Sheet

01
02
03
04
05
06
07

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Make sure that 59GA is still open.


Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 514
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

59GA

R33

LGCIU SYS 2 BAT SPLY

SEE
NOTES

Check on the ECAM Wheel page that the LGCIU2 only is energized:
refer to Fig. A-UBAAA Sheet 02 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 05 or Fig. A-UBAAA Sheet 07 for EIS 2 (LCD
Screens).
(c)

Open

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

LGCIU SYS 2

SEE
NOTES

Check on the ECAM Wheel page that after TEN seconds all the gear symbols are
amber XX (crosses):
refer to Fig. A-UBAAA Sheet 03 for EIS 1 (Cathode Ray Display Screens)
OR
refer to Fig. A-UBAAA Sheet 06 for EIS 2 (LCD Screens).
(d)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

2GA

Q35

PANEL DESIGNATION

FIN

LOCATION

49VU

1GA

C09

LGCIU SYS 2
(e)

Close

LGCIU SYS 1
NOTE:

(f)

SEE
NOTES

SEE
NOTES

To do a BITE test on LGCIU SYS 2 the CFDS must receive a ground


signal from LGCIU1.

On LGCIU 2 do a BITE test from the MCDU, the test result should be test OK,
refer to AMM Task 32-69-00-740-001).

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 515
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(g)

Close

PANEL DESIGNATION

FIN

LOCATION

121VU

58GA

R32

PANEL DESIGNATION

FIN

LOCATION

121VU

52GA

Q34

LGCIU SYS 1 BAT SPLY


(h)

(7)

SEE
NOTES

Close

LGCIU SYS 1 GND SPLY

SEE
NOTES

Subtask 321346-720-404-001 - Modified Safety Valve Circuit Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
32-30-00, Page Block 201

Diode 1VD 2/17 provides a feed back loop around Relay 62GA and must
be tested, otherwise the Landing Gear will not retract. This test below
avoids jacking the aircraft and swinging the gear.

(a)

Make sure that the LG ground locks are fitted and hydraulic systems are
depressurized, refer to AMM 32-30-00, Page Block 201.

(b)

Open the connector 49GA-A LGSV (Landing Gear Safety Valve and connect a
Portable Voltmeter between pin B and ground).

(c)

On the overhead panel 35VU switch the external power ON.

(d)

Check that 28 volts appears on the Portable Voltmeter.

(e)

Simulate the MLG left, MLG right and NLG to extend by:
1

For pre. Mod 37831J2877 - LGCIU P/N 664700500A4x: Enter interactive


mode LGCIU2 use MCDU, go to page 2 of the main menu and use LG
SIMULATION MODE.

For Post-Mod 37831J2877 NEW LGCIU P/N 80-178-02-88xxx or


80-178-03-88xxx: It will be necessary to use false targets (steel) on Prox
sensors 22GA, 23GA and 25 GA to perform this simulation.

(f)

Set the LG control lever 6GA to UP check that 28V remains indicated on the
Portable Voltmeter, then set the lever to DOWN.

(g)

Set the EXT PWR to OFF

(h)

Remove the Portable Voltmeter.

(i)

Reconnect the 49GA-A connector to the LGSV.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 516
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(8)

Subtask 321346-720-405-001 - Relay 62GA Test


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


(a)

References
Task 32-31-00-710-005

Perform an operational test of the safety valves, refer to AMM Task


32-31-00-710-005, or 32-31-00-710-005-01 or 32-31-00-710-005-02) Operational
Check to Ensure Safety Valve Close at 260 kts.

**CONF ALL
E.

CLOSE-UP

**CONF 002
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(2)

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 517
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 518
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 003
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 519
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 004
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 520
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 521
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 005
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 522
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 007
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 523
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 524
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(j)

(3)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 008
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 525
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 526
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 009
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 527
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 010
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 528
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 529
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 011
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 530
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 012
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(a)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 531
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 532
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(j)

(3)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 013
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 533
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 534
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 014
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(2)

References
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 535
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(3)

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

**CONF 015
(1)

Subtask 321346-410-001-001 - Install/Close Items Removed/Opened For Access


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 25-11-41-400-001
Task 25-13-41-400-001
Task 25-13-41-400-002
Task 52-41-00-410-002

(a)

In the cockpit, install the sidewall panels 212JW an 212HW, refer to AMM Task
25-13-41-400-002.

(b)

In the cockpit, install the ceiling panels 212FC and 211HC, refer to AMM Task
25-13-41-400-001.

(c)

In the cockpit, install the third occupant seat 14MM, refer to AMM Task
25-11-41-400-001.

(d)

Close the access doors 811, 812 and 822, refer to AMM Task 52-41-00-410-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 536
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(2)

Subtask 321346-942-001-001 - Close-up Procedures


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

(3)

References
Task 21-43-34-400-002
Task 21-63-34-400-001
Task 24-22-34-400-001
Task 24-23-34-400-001
Task 26-17-34-400-001
Task 27-94-34-400-001
Task 28-51-35-400-001
Task 32-31-71-400-001
Task 32-42-34-400-001
Task 32-49-34-400-001

(a)

Do the close-up procedure as specified after the installation of the GCU 1 and 2
FIN 1XU1 and 1XU2 (if installed), refer to AMM Task 24-22-34-400-001.

(b)

Do the close-up procedure as specified after the installation of the GCU APU FIN
1XS (if installed), refer to AMM Task 24-23-34-400-001.

(c)

Do the close-up procedure as specified after the installation of the SEC 3 FIN 1CE3
(if installed), refer to AMM Task 27-94-34-400-001.

(d)

Do the close-up procedure as specified after the installation of the zone controller
FIN 8HK (if installed), refer to AMM Task 21-63-34-400-001.

(e)

Do the close-up procedure as specified after the installation of the LGCIU 1 and 2
FIN 5GA1 and 5GA2 (if installed), refer to AMM Task 32-31-71-400-001.

(f)

Do the close-up procedure as specified after the installation of the TPIS detection
unit FIN 2GV (if installed), refer to AMM Task 32-49-34-400-001.

(g)

Do the close-up procedure as specified after the installation of the SDCU FIN
10WQ (if installed), refer to AMM Task 26-17-34-400-001.

(h)

Do the close-up procedure as specified after the installation of the BSCU FIN 10GG
(if installed), refer to AMM Task 32-42-34-400-001.

(i)

Do the close-up procedure as specified after the installation of the aft cargo heat
controller FIN 10HC (if installed), refer to AMM Task 21-43-34-400-002.

(j)

Do the close-up procedure as specified after the installation of the AFMC FIN 2QN
(if installed), refer to AMM Task 28-51-35-400-001.

Subtask 321346-942-002-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 537
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Remove the access platform(s).

(c)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 538
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-898-001 - Modification - Additional Work No. 01 (Introduced by Revision


No. 01)
**CONF ALL
WARNING:

MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

CAUTION:

ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP


ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
-

PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS


NECESSARY ON WIRING AND COMPONENTS.

REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND


OTHER CONTAMINATION.

THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION


AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE:

The accomplishment instructions of this Service Bulletin include procedures given


in other documents or in other sections of the Service Bulletin. When the words
refer to are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words in
accordance with are used then the given procedure must be followed.

NOTE:

The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.

NOTE:

Manual titles given in the accomplishment instructions are referred to by acronyms.


Refer to paragraph 1.J., References, for the definition of acronyms.

NOTE:

This Service Bulletin is classified mandatory or expected to be classified mandatory


by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.

NOTE:

This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 539
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

instructions and approval.


Task Associated Data
**CONF 002
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 003
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 004
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 005
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 007
Zone
120
7

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 540
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 008
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 009
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 010
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 011
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

1.00
1.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 541
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 012
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 013
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 014
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.00

**CONF 015
Zone
120
Access
Door

811
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

1.00
1.00

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 542
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
A.

GENERAL

**CONF 002
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 003
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 004
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 005
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 007
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 543
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 008
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 009
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 010
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 011
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 012
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 544
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 013
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 014
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 015
(1)

Subtask 321346-839-002-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF ALL
B.

PREPARATION

**CONF 002
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 545
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 003
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 546
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 004
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 005
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills
7

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 547
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 007
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 548
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 008
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

(a)

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 549
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 009
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 12-34-24-869-002
Task 52-41-00-010-002
NOTE:

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 010
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 550
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 011
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 551
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 012
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

(a)

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 552
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 013
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 12-34-24-869-002
Task 52-41-00-010-002
NOTE:

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 014
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 553
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF 015
(1)

Subtask 321346-941-003-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002
Task 52-41-00-010-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 554
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

(b)

Put an access platform in position at the access door 811.

(c)

Open the access door 811, refer to AMM Task 52-41-00-010-002.

**CONF ALL
C.

PROCEDURE

**CONF 002
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N
D9251719400095
(a)
1

KEYWORD
Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1
7

Plate-LGCIU

DATE: Dec 04/08

D9251719400095
SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 555
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

NOTE:

LGCIU plates P/N D9251719400195 and P/N D9251719400095 are


identical. This is only a modification of the number.

**CONF 003
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 004
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 556
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Reidentified part set REIDA01
ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 005
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 557
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 007
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 008
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 558
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Reidentified part set REIDA01
ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 009
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 559
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 010
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 011
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 560
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Reidentified part set REIDA01
ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 012
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 561
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 013
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 014
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 562
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Material necessary to do the job


Reidentified part set REIDA01
ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

**CONF 015
(1)

Subtask 321346-831-011-001 - Reidentify the LGCIU Plate in the Shelf 91VU

Zone
120

Work Zones and Access Panels


Access/Work location
Access
Door 811
Work location
Electrical panel 91VU
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Reidentified part set REIDA01


ITEM NEW PART N

KEYWORD

D9251719400095
(a)
1

Plate

ITEM OLD PART N

SEE
NOTES

D9251719400195

In the shelf 91VU :


Plate-LGCIU

D9251719400195

becomes
1

Plate-LGCIU
NOTE:

D9251719400095
LGCIU plates P/N D9251719400195 and P/N D9251719400095 are
identical. This is only a modification of the number.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 563
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
D.

TEST

**CONF 002
None
**CONF 003
None
**CONF 004
None
**CONF 005
None
**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None
**CONF 011
None
**CONF 012
None
**CONF 013
None
**CONF 014
None

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 564
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015
None
**CONF ALL
E.

CLOSE-UP

**CONF 002
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 003
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 52-41-00-410-002
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 004
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 565
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 005
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 007
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 566
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 008
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 009
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 010
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 567
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 011
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 52-41-00-410-002
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 012
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 013
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

DATE: Dec 04/08

References
Task 52-41-00-410-002

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 568
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 014
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)

References
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

**CONF 015
(1)

Subtask 321346-942-003-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 52-41-00-410-002

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Close the access door 811, refer to AMM Task 52-41-00-410-002.

(c)

Remove the access platform(s).

(d)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 569
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

This Page Intentionally Left Blank

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 570
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Task 321346-831-899-001 - Modification - Additional Work No. 02 (Introduced by Revision


No. 05) (Applicable for Configs. 002 thru 005 and Config. 015)
**CONF ALL
WARNING:

MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

CAUTION:

ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP


ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE). WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
-

PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS


NECESSARY ON WIRING AND COMPONENTS.

REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND


OTHER CONTAMINATION.

THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION


AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.

NOTE:

The accomplishment instructions of this Service Bulletin include procedures given


in other documents or in other sections of the Service Bulletin. When the words
refer to are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words in
accordance with are used then the given procedure must be followed.

NOTE:

The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.

NOTE:

Manual titles given in the accomplishment instructions are referred to by acronyms.


Refer to paragraph 1.J., References, for the definition of acronyms.

NOTE:

This Service Bulletin is classified mandatory or expected to be classified mandatory


by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.

NOTE:

Discarded parts must be managed at the operators discretion.

NOTE:

This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 571
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
Task Associated Data
**CONF 002
Zone
210
Modified FIN
31LM
Access
Door

831
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 003
Zone
210
Modified FIN
31LM
Access
Door

831
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 004
Zone
210
Modified FIN
31LM
Access
Door

831
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 005
Zone
210
Modified FIN
31LM

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 572
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Access
Door

831
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF 007
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 008
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 009
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 010
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 011
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 012
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 013
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

DATE: Dec 04/08

1.00
1.50

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 573
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 014
Manpower
TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.00
1.50

**CONF 015
Zone
210
Modified FIN
31LM
Access
Door

831
Manpower

TOTAL MANHOURS
ELAPSED TIME (HOURS)

1.50
1.50

**CONF ALL
A.

GENERAL

**CONF 002
(1)

Subtask 321346-839-003-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 003
(1)

Subtask 321346-839-003-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 004
(1)

Subtask 321346-839-003-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 574
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 005
(1)

Subtask 321346-839-003-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None
**CONF 011
None
**CONF 012
None
**CONF 013
None
**CONF 014
None
**CONF 015
(1)

Subtask 321346-839-003-001 - Administrative


Manpower Resources

Skills

NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 575
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
B.

PREPARATION

**CONF 002
(1)

Subtask 321346-941-004-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

(a)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

**CONF 003
(1)

Subtask 321346-941-004-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

References
Task 12-34-24-869-002

Aircraft on the ground resting on landing gear (the ground safety

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 576
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

locks and the wheel chocks are in position on the landing gear)

(a)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

**CONF 004
(1)

Subtask 321346-941-004-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 577
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

**CONF 005
(1)

Subtask 321346-941-004-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

References
Aircraft Maintenance Manual (AMM)
Task 12-34-24-869-002
NOTE:

(a)

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 578
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 011
None
**CONF 012
None
**CONF 013
None
**CONF 014
None
**CONF 015
(1)

Subtask 321346-941-004-001 - Job Set-up


Manpower Resources

Skills

NON SPECIFIC

Aircraft Maintenance Manual (AMM)


NOTE:

(a)

References
Task 12-34-24-869-002

The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
-

Aircraft on the ground resting on landing gear (the ground safety


locks and the wheel chocks are in position on the landing gear)

Engine shut down, thrust reversers closed and locked

Aircraft in clean configuration

Parking brake applied

Aircraft electrical network de-energized

Hydraulic systems depressurized

Access to the cockpit and cabin is available

All circuit breakers are in closed position

All controls in NORM, AUTO or OFF position.

Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-869-002.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 579
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL
C.

PROCEDURE

**CONF 002
(1)

Subtask 321346-831-013-001 - Replace the Placard 31LM (line R)

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM)

KEYWORD

2
3
4

1
5
5

Placard
Button
Button

D11312197A00
ASNA2080G01
ASNA2080G04

Fig. A-FCAAA
Modification of the Placard of the C/B
Panel 121VU - ADDITIONAL WORK
(a)

SEE
NOTES

References
Sheet 01

Remove:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11311600A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

attached with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic
(b)

Install:
Refer to Fig. A-FCAAA Sheet 01

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 580
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

FIN 31LM
1

Placard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attach with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

**CONF 003
(1)

Subtask 321346-831-013-001 - Replace the Placard 31LM (line R)

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM)

KEYWORD

2
3
4

1
5
5

Placard
Button
Button

D11312197A00
ASNA2080G01
ASNA2080G04

Fig. A-FCAAA
Modification of the Placard of the C/B
Panel 121VU - ADDITIONAL WORK
(a)

SEE
NOTES

References
Sheet 01

Remove:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11311600A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

attached with:
5

Button-Rivet Plastic
or

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 581
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

Button-Rivet Plastic
(b)

ASNA2080G04

Item (4)

Discard

Install:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attach with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

**CONF 004
(1)

Subtask 321346-831-013-001 - Replace the Placard 31LM (line R)

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM)

KEYWORD

2
3
4

1
5
5

Placard
Button
Button

D11312197A00
ASNA2080G01
ASNA2080G04

Fig. A-FCAAA
Modification of the Placard of the C/B
Panel 121VU - ADDITIONAL WORK
(a)

SEE
NOTES

References
Sheet 01

Remove:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11311600A00

DATE: Dec 04/08

Item (2)

Discard

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 582
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

attached with:
5

Button-Rivet Plastic

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

or
5

Button-Rivet Plastic
(b)

Install:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attach with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

**CONF 005
(1)

Subtask 321346-831-013-001 - Replace the Placard 31LM (line R)

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM)

KEYWORD

2
3
4

1
5
5

Placard
Button
Button

D11312197A00
ASNA2080G01
ASNA2080G04

Fig. A-FCAAA
Modification of the Placard of the C/B
Panel 121VU - ADDITIONAL WORK

DATE: Dec 04/08

SEE
NOTES

References
Sheet 01

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 583
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Remove:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11311600A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

attached with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic
(b)

Install:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attach with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None
**CONF 011
None
**CONF 012
None

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 584
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 013
None
**CONF 014
None
**CONF 015
(1)

Subtask 321346-831-013-001 - Replace the Placard 31LM (line R)

Zone
210

Work Zones and Access Panels


Access/Work location
Access
Door 831
Manpower Resources

Manhours
Minimum number of person

0.50
1

Subtask elapsed time

0.50

Skills

NON SPECIFIC
Material necessary to do the job

Supplementary kit 321346A03S01


ITEM NEW PART N

QTY (UM)

KEYWORD

2
3
4

1
5
5

Placard
Button
Button

D11312197A00
ASNA2080G01
ASNA2080G04

Fig. A-FCAAA
Modification of the Placard of the C/B
Panel 121VU - ADDITIONAL WORK
(a)

SEE
NOTES

References
Sheet 01

Remove:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11311600A00

Item (2)

Discard

ASNA2080G01

Item (3)

Discard

ASNA2080G04

Item (4)

Discard

attached with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 585
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Install:
Refer to Fig. A-FCAAA Sheet 01

FIN 31LM
1

Placard

D11312197A00

Item 2

ASNA2080G01

Item 3

ASNA2080G04

Item 4

attach with:
5

Button-Rivet Plastic
or

Button-Rivet Plastic

**CONF ALL
D.

TEST

**CONF 002
None
**CONF 003
None
**CONF 004
None
**CONF 005
None
**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None
**CONF 011
None

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 586
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 012
None
**CONF 013
None
**CONF 014
None
**CONF 015
None
**CONF ALL
E.

CLOSE-UP

**CONF 002
(1)

Subtask 321346-942-004-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Put the aircraft back to its initial configuration.

**CONF 003
(1)

Subtask 321346-942-004-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Put the aircraft back to its initial configuration.

**CONF 004
(1)

Subtask 321346-942-004-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 587
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(b)

Put the aircraft back to its initial configuration.

**CONF 005
(1)

Subtask 321346-942-004-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC
(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Put the aircraft back to its initial configuration.

**CONF 007
None
**CONF 008
None
**CONF 009
None
**CONF 010
None
**CONF 011
None
**CONF 012
None
**CONF 013
None
**CONF 014
None
**CONF 015
(1)

Subtask 321346-942-004-001 - Close-up


Manpower Resources

Skills

NON SPECIFIC

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 588
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

(a)

Make sure that the work areas are clean and clear of tools and other items of
equipment.

(b)

Put the aircraft back to its initial configuration.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 589
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

UP

DOWN

6GA

A B

N_SB_321346_7_BAAA_01_01

Figure A-UBAAA - Sheet 01


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 590
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

NLG

AMBER
GREEN

MLG LEFT

MLG RIGHT

AMBER

AMBER
GREEN

GREEN

A
VIEW OF THE WHEEL PAGE WITH ONE LGCIU POWERED.

N_SB_321346_7_BAAA_02_01

Figure A-UBAAA - Sheet 02


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 591
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

NLG

AMBER

MLG LEFT

MLG RIGHT

AMBER

AMBER

B
VIEW OF THE WHEEL PAGE WITH BOTH LGCIU OFF.

N_SB_321346_7_BAAA_03_02

Figure A-UBAAA - Sheet 03


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 592
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

UP

DOWN

6GA

C D E

N_SB_321346_7_BAAA_04_01

Figure A-UBAAA - Sheet 04


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 593
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

NLG

GREEN

AMBER

MLG LEFT

GREEN

MLG RIGHT

AMBER

GREEN

AMBER

N_SB_321346_7_BAAA_05_01

Figure A-UBAAA - Sheet 05


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 594
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

NLG

AMBER

MLG LEFT

MLG RIGHT

AMBER

AMBER

D
VIEW ON MCDU WITH BOTH LGCIU OFF

N_SB_321346_7_BAAA_06_00

Figure A-UBAAA - Sheet 06


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 595
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

NLG

AMBER
GREEN

MLG LEFT

MLG RIGHT

AMBER

AMBER

GREEN

GREEN

NOTE: THE HANDED DISPLAY SHOWN IS ONLY AVAILABLE ON AIRCRAFT WITH DISPLAY MANAGEMENT COMPUTER
SOFTWARE P/N SXT30E2SA0820 (EIS 2 STANDARD S82), INTRODUCED BY MOD 38146.

N_SB_321346_7_BAAA_07_02

Figure A-UBAAA - Sheet 07


LGCIU Location and Display

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 596
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

MODIFICATION OF THE EQUIPMENT


AND THE WIRING IN 121VU

120VU

2M

1M

90V

MODIFICATION OF THE EQUIPMENT


AND THE WIRING IN 93VU

INSTALLATION OF THE
LGCIU PLATE IN 91VU

N_SB_321346_5_AAAA_01_00

Figure A-FAAAA - Sheet 01


Location of the Working Area

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 597
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Z210

B
A
FR24A

FR1

120VU

(2 POS) (31)
(32)
(28)

(30)

(29)
(33)
(34)
(4 POS)

C
B

702VU

N_SB_321346_5_ABAA_01_00

Figure A-FABAA - Sheet 01


Removal/Installation of the Equipment in the Cockpit (For Access)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 598
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 007 thru 014

FR20

FR9

FR9

FR10

FR12

FR14

FR16

FR18

FR20

C
/C L

FWD

1031VN
1009VN
1005VN

B
N_SB_321346_5_ACAA_01_00

Figure A-FACAA - Sheet 01


Installation of the New Grounding Points at FR10 in AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 599
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 007 thru 014

A/C CL

AFTER

2 STRIPPING DIA. 14 mm (0.551 in)


1005VN

1039VN

1037VN

50 mm
(1.969 in)

60 mm
(2.362 in)

150 mm
(5.906 in)

ELECTRICAL BONDING

HOLE DIA
HOLE

MIN.

MAX.

mm

in

mm

in

0.197

5.1

0.201

N_SB_321346_5_ACAA_02_00

Figure A-FACAA - Sheet 02


Installation of the New Grounding Points at FR10 in AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 600
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

FR20

FR9

FR9

FR10

FR12

FR14

FR16

FR18

FR20

C
/C L

FWD

1031VN
1009VN
1005VN

B
N_SB_321346_5_ACAB_01_00

Figure A-FACAB - Sheet 01


Installation of the New Grounding Point at FR10 in AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 601
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

A/C CL

AFTER

1 STRIPPING DIA. 14 mm (0.551 in)


1005VN

1019VN

1039VN

60 mm
(2.362 in)

150 mm
(5.906 in)

ELECTRICAL BONDING
HOLE DIA
HOLE

MIN.

MAX.

mm

in

mm

in

0.197

5.1

0.201

N_SB_321346_5_ACAB_02_00

Figure A-FACAB - Sheet 02


Installation of the New Grounding Point at FR10 in AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 602
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Z210

B
FR24A

FR13

FR1

120VU

R
(2)
2

BA LG
CIU
SY T
S1

AG

SP
L
SY Y
S2

85

AG

(5 POS) (3) 3
OR
(5 POS) (4) 4

95

C
30
31
32
33
34

B
121VU

35

N_SB_321346_5_ADAA_01_00

Figure A-FADAA - Sheet 01


Modification of the Equipment in the C/B Panel 121VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 603
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 003, 007 thru 014

FR24A

Z120
FR1

BEFORE

A
90VU
(7)
(6)
(5)

48GA

(9)

(8)
56GA

57GA

(11)

(12)

(10)

93VU

D
217VT
N_SB_321346_5_AEAA_01_00

Figure A-FAEAA - Sheet 01


Modification of the Equipment in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 604
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 003, 007 thru 014

AFTER

15 (3 POS)
14
13

FOOL PROOFING

F
POSITION B23

62GA

E
93VU

16
217VT
639VG

637VG

679VG

H
679VG
ELECTRICAL BONDING

G
N_SB_321346_5_AEAA_02_00

Figure A-FAEAA - Sheet 02


Modification of the Equipment in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 605
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 004 thru 005, 015

FR24A

BEFORE
Z120
FR1

A
90VU
(7)
(6)
(5)

48GA

(9)

(8)
56GA

57GA

(11)

(12)

(10)

93VU

D
217VT
N_SB_321346_5_AEAB_01_00

Figure A-FAEAB - Sheet 01


Modification of the Equipment in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 606
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 004 thru 005, 015

AFTER

15 (3 POS)
14
13

FOOL PROOFING

G
POSITION A30

62GA

E
93VU

16
217VT
639VG

637VG

679VG

H
679VG
ELECTRICAL BONDING

G
N_SB_321346_5_AEAB_02_00

Figure A-FAEAB - Sheet 02


Modification of the Equipment in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 607
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002, 004, 007, 009 thru 014

FR24A

Z120
FR1

BEFORE
01

A
90VU

01

DRAINING PIPE

1XU2
GCU2

C
NOTE :
01 DISCARD THE ATTACHMENT PARTS

1XS
GCUAPU
(OPTIONAL)

(22)
(23)
(24)
(6 POS)

1XU1
GCU1

(17)

B
91VU

F
W
D
N_SB_321346_5_AFAA_01_00

Figure A-FAFAA - Sheet 01


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 608
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002, 004, 007, 009 thru 014

AFTER

21

DRAINING PIPE
36
37

37
38

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

22
23
24
(6 POS)
27

23

91VU

1XU1
GCU1

F
W
D

27
23

25

25

21

21
26

DRAINING PIPE

26

ELECTRICAL BONDING
24

24

E
N_SB_321346_5_AFAA_02_01

Figure A-FAFAA - Sheet 02


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 609
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 003, 005, 008

FR24A

Z120
FR1

BEFORE

A
90VU

(18)
OR
(19)

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

(22)
(23)
(24)
(6 POS)

C
NOTE : PLATE ITEM (19) NOT SHOWN

B
91VU

1XU1
GCU1

F
W
D
N_SB_321346_5_AFAB_01_00

Figure A-FAFAB - Sheet 01


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 610
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 003, 005, 008

AFTER
E

21
37
38

36
37

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

1XU1
GCU1

22
23
24
(6 POS)

C
91VU

F
W
D

35

35

23

23

25

25

21

21

24

24

ELECTRICAL BONDING

N_SB_321346_5_AFAB_02_01

Figure A-FAFAB - Sheet 02


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 611
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

FR24A

Z120
FR1

A
90VU

BEFORE

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

(22)
(23)
(24)
(6 POS)

1XU1
GCU1

(20)

B
91VU

F
W
D
N_SB_321346_5_AFAD_01_00

Figure A-FAFAD - Sheet 01


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 612
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

AFTER

21

DRAINING PIPE
36
37

37
38

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

22
23
24
(6 POS)
27

23

91VU

1XU1
GCU1

F
W
D

27
23

25

25

21

21
26

DRAINING PIPE

26

ELECTRICAL BONDING
24

24

E
N_SB_321346_5_AFAD_02_00

Figure A-FAFAD - Sheet 02


Modification of the Equipment in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 613
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 007 thru 014

FR10

B
24

FR24A

Z120

23
22

FR1

A/C CL

A
FR10

2E
1039VN

1037VN
2M

A
1M
1XS (IF EXISTING)
FR9
3E
1XU2
203VCA
(2M)

201VCA
(1M)
FR8

1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

1XU1
GCU1

B
91VU

ELECTRICAL BONDING

N_SB_321346_5_AGAA_01_01

Figure A-FAGAA - Sheet 01


Modification of the Routing behind the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 614
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

AFTER
FR10

B
24

FR24A

Z120

23
22

FR1

A
FR10

2E

1039VN

1019VN

2M

A
1M
1XS (IF EXISTING)
FR9
MAKE A LOOP WITH
THE STOWED WIRES.

3E
1XU2
203VCA

201VCA
(1M)

(2M)

FR8
1XU2
GCU2

1XS
GCUAPU
(OPTIONAL)

1XU1
GCU1

B
91VU
ELECTRICAL BONDING
N_SB_321346_5_AGAB_01_04

Figure A-FAGAB - Sheet 01


Modification of the Routing behind the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 615
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBAAA - Sheet 01


Modification of the Wiring in the C/B Panel 121VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 616
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBAAA - Sheet 02


Modification of the Wiring in the C/B Panel 121VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 617
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

121VU

121VU

121VU

121VU

END2

Wire
Elec.Ident.

Term

4KS1

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Instructions

Zone or

Inch

Panel

Elec.Ident.

Term

Terminal P/N

31541565

PG24

121VU

15CE2

M1O

3 EN3155016M2018

31541565

PG24

121VU

15CE2

M1N

31541565

PG24

121VU

15CE2

M1O

58GA

4 EN3155016M2018

31541565

PG24

121VU

15CE2

M1N

121VU

59GA

1 NSA936501TA1003

24680490

121VU

59GA

3 EN3155016M2018

31542895

10

121VU

59GA

4 EN3155016M2018

11

121VU

59GA

12

121VU

13

121VU

58GA
4KS1

5
6
7
DK10

1000

40

121VU

2WE1

1 NSA936501TA1003

(a) A

PG24

500

20

121VU

4KS1

3 EN3155016M2018

(a) A

31542895

PG24

500

20

121VU

4KS1

4 EN3155016M2018

(a) A

3 EN3155016M2018

31542896

PG24

500

20

121VU

58GA

3 EN3155016M2018

(a) A

59GA

4 EN3155016M2018

31542896

PG24

500

20

121VU

58GA

4 EN3155016M2018

(a) A

58GA

1 NSA936501TA1003

24680489

DK10

1000

40

121VU

1 NSA936501TA1003

(a) A

14
15
16
17
18
19
20
21
22
23
24
25
(a)
A
M1O

= BUNDLE D9000095223395
= ADDED WIRE
= OLD HOOKUP ON END 1

M1N

= NEW HOOKUP ON END 1

Figure A-FBAAA - Sheet 03


Modification of the Wiring in the C/B Panel 121VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 618
AIRBUS S.A.S. 2007. All rights reserved.

1WE1

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBBAA - Sheet 01


Modification of the Wiring in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 619
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBBAA - Sheet 02


Modification of the Wiring in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 620
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBBAA - Sheet 03


Modification of the Wiring in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 621
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

END2

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Length
Co

Rte

Gauge

mm

Instructions

Zone or

Inch

Panel

Elec.Ident.

Term

Terminal P/N

93VU

217VT

8A

32310401

1M

CF22

93VU

48GAA

93VU

217VT

8B

32310405

1M

CF22

93VU

48GAA

93VU

217VT

10A

32310438

1M

CF22

93VU

56GA

93VU

217VT

10E

32310439

1M

CF22

93VU

56GA

93VU

217VT

9A

32310440

1M

CF22

93VU

57GA

93VU

217VT

9E

32310441

1M

CF22

93VU

57GA

93VU

217VT

9K

32310442

1M

CF22

93VU

621VG

GND

93VU

217VT

10D

32310443

1M

CF22

93VU

217VT

9F

93VU

217VT

10F

32310446

1M

CF22

93VU

48GAA

10

93VU

217VT

8C

32310447

1M

CF20

93VU

48GAA

11

93VU

48GAA

32310400

1M

CF20

93VU

213VT

2J

12

93VU

48GAA

32310422

1M

CF22

93VU

213VT

5G

13

93VU

213VT

8H

32310433

1M

CF20

93VU

53GAA

B2

17

93VU

62GAA

A1 EN3155017F1616

32310400

1M

CF20

1000

40

93VU

213VT

2J EN3155016M2018

(a) A

18

93VU

62GAA

X1 EN3155017F1620

32310405

1M

CF22

1000

40

93VU

217VT

8B EN3155016M2018

(a) A

19

93VU

62GAA

X2 EN3155017F1620

32310422

1M

CF22

1000

40

93VU

213VT

5G EN3155016M2222

(a) A

20

93VU

62GAA

A2 EN3155017F1616

32310447

1M

CF20

1000

40

93VU

217VT

8C EN3155016M2018

(a) A

21

93VU

213VT

8H EN3155016M2018

32310433

1M

CF20

1000

40

93VU

283VC

45 EN3155008M1614

(a) A

22

93VU

283VC

44 EN3155008M1614

32310487

1M

CF20

1000

40

93VU

53GAA

B2 EN3155017F1616

(a) A

23

93VU

283VC

47 EN3155008M1614

32310525

1M

CF20

1000

40

93VU

679VG

GND EN3155015F2018

(a) A

14
15
16

24
25
(a)
A
D

= BUNDLE D9000095223395
= ADDED WIRE
= DELETED WIRE
Figure A-FBBAA - Sheet 04
Modification of the Wiring in the Shelf 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 622
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBCAA - Sheet 01


Modification of the Wiring in the Shelf 94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 623
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

94VU

Term

282VC

Terminal P/N

41 EN3155014M2018

Ident.

Lenght
Co

Rte

32310532

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A
GND

= BUNDLE D9000095223395
= ADDED WIRE
= GROUND
Figure A-FBCAA - Sheet 02
Modification of the Wiring in the Shelf 94VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 624
AIRBUS S.A.S. 2007. All rights reserved.

Gauge

mm

CF20

1500

Instructions

Zone or

Inch
60

Panel
94VU

Elec.Ident.
654VG

Term

Terminal P/N

GND EN3155015F2018

(a) A

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

Figure A-FBLAA - Sheet 01


Modification of the Wiring in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 625
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

Figure A-FBLAA - Sheet 02


Modification of the Wiring in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 626
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

Figure A-FBLAA - Sheet 03


Modification of the Wiring in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 627
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

Figure A-FBLAA - Sheet 04


Modification of the Wiring in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 628
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N
F

Ident.

Lenght
Co

mm

Inch

Instructions

Zone or

Rte

Gauge

Panel

Elec.Ident.

Term

Terminal P/N

31440121

1M

CF24

92VU

274VCA

39

M1O

31440121

1M

CF24

92VU

274VCA

39

M1N

31440122

1M

CF24

92VU

274VCA

40

M1O

31440122

1M

CF24

92VU

274VCA

40

M1N

31440123

1M

CF24

92VU

274VCA

41

M1O

31440123

1M

CF24

92VU

274VCA

41

M1N

31440267

1M

CF18

121

1017VN

GND

M1O

121

1017VN

GND

M1N

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

91VU

5GT1A

WS NSA936604CA0931

31440267

1M

CF18

91VU

5GT1A

SH

3144G7076

1M

TK24

92VU

274VCA

SH

M1O

10

91VU

5GT1A

31447076

1M

TK24

92VU

274VCA

36

M1O

11

91VU

5GT1A

31447076

1M

TK24

92VU

274VCA

35

M1O

12

91VU

5GT1A

SH E07180230

3144G7076

1M

TK24

92VU

274VCA

SH E07180230

M1N

13

91VU

5GT1A

WS NSA936604CA0931

31447076

1M

TK24

92VU

274VCA

36

M1N

14

91VU

5GT1A

WS NSA936604CA0931

31447076

1M

TK24

92VU

274VCA

35

M1N

15

91VU

5GT1A

SH

3144G7077

1M

TK24

92VU

274VCA

SH

M1O

16

91VU

5GT1A

31447077

1M

TK24

92VU

274VCA

38

M1O

17

91VU

5GT1A

31447077

1M

TK24

92VU

274VCA

37

M1O

18

91VU

5GT1A

SH E07180230

3144G7077

1M

TK24

92VU

274VCA

SH E07180230

M1N

19

91VU

5GT1A

WS NSA936604CA0931

31447077

1M

TK24

92VU

274VCA

38

M1N

20

91VU

5GT1A

WS NSA936604CA0931

31447077

1M

TK24

92VU

274VCA

37

M1N

21

91VU

5GT2A

31440223

2M

CF24

92VU

272VCA

39

M1O

22

91VU

5GT2A

31440223

2M

CF24

92VU

272VCA

39

M1N

23

91VU

5GT2A

31440224

2M

CF24

92VU

272VCA

40

M1O

24

91VU

5GT2A

31440224

2M

CF24

92VU

272VCA

40

M1N

WS NSA936604CA0931
G
WS NSA936604CA0931
H
WS NSA936604CA0931
A

F
WS NSA936604CA0931
G
WS NSA936604CA0931

25
M1O
M1N
SH

= OLD HOOKUP ON END 1


= NEW HOOKUP ON END 1
= SHIELD

GND

= GROUND

Figure A-FBLAA - Sheet 05


Modification of the Wiring in the Shelf 91VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 629
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

L
i
n
e

END1

LEAD

Zone or
Panel

END2

Wire
Elec.Ident.

Term

Terminal P/N
H

Ident.

Lenght
Co

mm

Inch

Instructions

Zone or

Rte

Gauge

Panel

Elec.Ident.

Term

Terminal P/N

31440225

2M

CF24

92VU

272VCA

41

M1O

31440225

2M

CF24

92VU

272VCA

41

M1N

31440268

2M

CF18

121

1019VN

GND

M1O

121

1019VN

GND

M1N

91VU

5GT2A

91VU

5GT2A

91VU

5GT2A

91VU

5GT2A

WS NSA936604CA0931

31440268

2M

CF18

91VU

5GT2A

SH

3144G7119

2M

TK24

92VU

272VCA

SH

M1O

91VU

5GT2A

31447119

2M

TK24

92VU

272VCA

36

M1O

91VU

5GT2A

31447119

2M

TK24

92VU

272VCA

35

M1O

91VU

5GT2A

SH E07180230

3144G7119

2M

TK24

92VU

272VCA

SH E07180230

M1N

91VU

5GT2A

WS NSA936604CA0931

31447119

2M

TK24

92VU

272VCA

36

M1N

10

91VU

5GT2A

WS NSA936604CA0931

31447119

2M

TK24

92VU

272VCA

35

M1N

11

91VU

5GT2A

SH

3144G7120

2M

TK24

92VU

272VCA

SH

M1O

12

91VU

5GT2A

31447120

2M

TK24

92VU

272VCA

38

M1O

13

91VU

5GT2A

31447120

2M

TK24

92VU

272VCA

37

M1O

14

91VU

5GT2A

SH E07180230

3144G7120

2M

TK24

92VU

272VCA

SH E07180230

M1N

15

91VU

5GT2A

WS NSA936604CA0931

31447120

2M

TK24

92VU

272VCA

38

M1N

16

91VU

5GT2A

WS NSA936604CA0931

31447120

2M

TK24

92VU

272VCA

37

M1N

20

91VU

3144G7076

W.F.

31440132

1M

CF24

92VU

274VCA

34

F.R.

21

91VU

3144G7076

W.F.

31440132

1M

CF24

91VU

3144G7077

W.F.

F.R.

22

92VU

3144G7119

W.F.

31440230

2M

CF24

92VU

272VCA

34

F.R.

23

92VU

3144G7119

W.F.

31440230

2M

CF24

92VU

3144G7120

W.F.

F.R.

WS NSA936604CA0931
A

17
18
19

24
25
M1O
M1N
F.R.

= OLD HOOKUP ON END 1


= NEW HOOKUP ON END 1
= FOR REFERENCE

SH
W.F.
GND

= SHIELD
= WIRE FERRULE
= GROUND

Figure A-FBLAA - Sheet 06


Modification of the Wiring in the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 630
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBDAA - Sheet 01


Modification of the Wiring between the Shelves 91VU and 93VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 631
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Inch

Instructions

Zone or
Panel

Elec.Ident.

Term

Terminal P/N

91VU

201VCA

E EN3155019F2018

32310488

1M

CF20

3500

140

93VU

283VCA

44 EN3155003F1614

(a) A

91VU

201VCA

B EN3155019F2018

32310489

1M

CF20

3500

140

93VU

283VCA

45 EN3155003F1614

(a) A

91VU

201VCA

C EN3155019F2018

32310526

1M

CF20

3500

140

93VU

283VCA

47 EN3155003F1614

(a) A

4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A

= BUNDLE D9000095223395
= ADDED WIRE

Figure A-FBDAA - Sheet 02


Modification of the Wiring between the Shelves 91VU and 93VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 632
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBEAA - Sheet 01


Modification of the Wiring between the Shelves 91VU and 94VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 633
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Inch

Instructions

Zone or
Panel

Elec.Ident.

Term

Terminal P/N

91VU

203VCA

D EN3155019F2018

32310502

2M

CF20

4000

160

94VU

282VCA

41 EN3155015F2018

(a) A

91VU

203VCA

C EN3155019F2018

32310533

2M

CF20

4000

160

94VU

282VCA

11 EN3155015F2018

(a) A

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A

= BUNDLE D9000095223395
= ADDED WIRE

Figure A-FBEAA - Sheet 02


Modification of the Wiring between the Shelves 91VU and 94VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 634
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 007 thru 014

Figure A-FWFAA - Sheet 01


Modification of the Wiring between the Shelf 91VU and the AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 635
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

Figure A-FWFAB - Sheet 01


Modification of the Wiring between the Shelf 91VU and the AVNCS Compartment

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 636
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 007 thru 014

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Instructions

Zone or

Inch

Panel

Elec.Ident.

Term

Terminal P/N

91VU

201VCA

J EN3155019F2018

32310527

1M

CF20

1000

40

125

1039VN

GND NSA936501TA2004

(a) A

91VU

203VCA

J EN3155019F2018

32310530

2M

CF20

1000

40

125

1037VN

GND NSA936501TA2004

(a) A

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A

= BUNDLE D9000095223395
= ADDED WIRE

Figure A-FHFAA - Sheet 01


Modification of the Wiring between the Shelf 91VU and the AVNCS Compartment

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 637
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 015

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Instructions

Zone or

Inch

Panel

Elec.Ident.

Term

Terminal P/N

91VU

201VCA

J EN3155019F2018

32310527

1M

CF20

1000

40

125

1039VN

GND NSA936501TA2004

(a) A

91VU

203VCA

J EN3155019F2018

32310530

2M

CF20

1000

40

125

1019VN

GND NSA936501TA2004

(a) A

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A

= BUNDLE D9000095223395
= ADDED WIRE

Figure A-FHFAB - Sheet 01


Modification of the Wiring between the Shelf 91VU and the AVNCS Compartment

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 638
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBGAA - Sheet 01


Modification of the Wiring between the Rear Panel 120VU and the FWD Electronics Rack 90VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 639
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

94VU

282VCA

91VU

203VCA

Term

Terminal P/N

11
B EN3155019F2018

Ident.

Lenght
Co

Rte

Gauge

32310074

2M

CF20

32310074

2M

CF20

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A
D

= BUNDLE D9000095223395
= ADDED WIRE
= DELETED WIRE

Figure A-FBGAA - Sheet 02


Modification of the Wiring between the Rear Panel 120VU and the FWD Electronics Rack 90VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 640
AIRBUS S.A.S. 2007. All rights reserved.

mm

9500

Inch

380

Instructions

Zone or
Panel

Elec.Ident.

Term

Terminal P/N

120VU

2206VCA

120VU

2206VCA

4 EN3155014M2018

D
(a) A

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBHAA - Sheet 01


Modification of the Wiring between the Rear Panel 120VU and the Shelf 91VU

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 641
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

L
i
n
e

END1

LEAD

Zone or
Panel

Wire
Elec.Ident.

Term

Terminal P/N

Ident.

Lenght
Co

Rte

Gauge

mm

Inch

Instructions

Zone or
Panel

Elec.Ident.

Term

Terminal P/N

120VU

2254VC

Y EN3155019F2018

32310496

1M

DK20

3000

120

121VU

58GA

2 NSA936501TA2003

(a) A

120VU

2254VC

Z EN3155019F2018

32310509

1M

DK20

3000

120

121VU

59GA

2 NSA936501TA2003

(a) A

120VU

2254VCA

Y EN3155018M2018

32310497

1M

CF20

13500

540

91VU

201VCA

A EN3155019F2018

(a) A

120VU

2254VCA

Z EN3155018M2018

32310510

1M

CF20

13500

540

91VU

201VCA

D EN3155019F2018

(a) A

5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
(a)
A

= BUNDLE D9000095223395
= ADDED WIRE

Figure A-FBHAA - Sheet 02


Modification of the Wiring between the Rear Panel 120VU and the Shelf 91VU

END2

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 642
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBJAA - Sheet 01


Wiring Diagram of the New LGCIU Plate (For Information Only)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 643
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF ALL

Figure A-FBKAA - Sheet 01


Wiring Diagram of the New LGCIU Plate (For Information Only)

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 644
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

**CONF 002 thru 005, 015

Z210

B
FR24A

FR13

FR1

120VU
(5 POS) (3) 3
OR
(5 POS) (4) 4

R
(2)
2
BA LG
CIU
SY T
S1

SP
L
SY Y
S2

3
4
30
31
32
33
34

35

121VU
N_SB_321346_5_CAAA_01_00

Figure A-FCAAA - Sheet 01


Modification of the Placard of the C/B Panel 121VU - ADDITIONAL WORK

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 645
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN

This Page Intentionally Left Blank

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 646
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 01 - Configuration Definition Table
**CONF ALL
For further information concerning the Configuration Definition, refer to Appendix 01 - Configuration
Definition Table

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 01 - Configuration Definition Table

X
X

X
X

X
X
X

X
X

X
X

X
X
X
X
X
X
X
X
X
X
X

NOTE:
"X" IS USED FOR MODIFICATIONS EMBODIED BEFORE
ACCOMPLISHMENT OF THIS SERVICE BULLETIN

311066
24040K3556

20079K0061

251186
25995P4341

281059
38241K11694

30034P6310

32411P7771

31051P6983

22020J0679

271162

X
X
20024J0006

MOD
EMBODIED

SB
C02 C03 C04 C05 C07 C08 C09 C10 C11 C12 C13 C14 C15
ACCOMPLISHED

**CONF ALL

N_SB_321346_5_ZZAA_01_05

Figure A-FZZAA - Sheet 01


Configuration Definition Table

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 2
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 02 - Manpower Gantt Chart
**CONF ALL
(1)

For an explanation of the manhours and elapsed time, refer to the following Gantt Charts.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 02 - Manpower Gantt Chart

**CONF 002 thru 005, 007 thru 014

ELAPSED TIME ASSUMPTIONS SERVICE BULLETIN No. A320321346

STEPS

MH

ET

PER

GET ACCESS

3.00

3.00

REMOVAL OF EQPT IN CKPT

2.00

2.00

REMOVAL OF EQPT IN AVNCS

4.00

4.00

INSTL OF GND POINTS

1.00

1.00

MODIF. OF EQPT/WIRING 121VU

3.00

3.00

MODIF. OF EQPT/WIRING 93VU

5.00

5.00

MODIF. OF EQPT 94VU

0.50

0.50

MODIF. OF EQPT 91VU

1.00

1.00

MODIF. OF WIRING 91VU/93VU

2.00

2.00

MODIF. OF WIRING 91VU/94VU

2.00

2.00

MODIF. OF WIRING 91VU/AVNCS

1.00

1.00

MODIF. OF WIRING 120VU/AVNCS

3.00

3.00

MODIF. OF WIRING 120VU/91VU

4.00

4.00

INSTL OF EQPT IN CKPT

3.00

3.00

INSTL OF EQPT IN AVNCS

5.00

5.00

TEST

4.50

4.50

CLOSEUP

4.00

4.00

1
5

0
TOTAL MANHOURS (MH)
ELAPSED TIME (ET)

10

48.0
35.5

20

25

30

35
ELAPSED TIME
(HOURS)

NOTE: THIS CHART IS ONLY A PROPOSAL.


OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.

MH: MANHOURS
ET: ELAPSED TIME
PER: NUMBER OF PERSONS

N_SB_321346_5_XXAA_01_01

Figure A-FXXAA - Sheet 01


Manpower Gantt Chart

15

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 2
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
Appendix 02 - Manpower Gantt Chart

**CONF 015

ELAPSED TIME ASSUMPTIONS SERVICE BULLETIN No. A320321346

STEPS

MH

ET

PER

GET ACCESS

3.00

3.00

REMOVAL OF EQPT IN CKPT

2.00

2.00

REMOVAL OF EQPT IN AVNCS

4.00

4.00

INSTL OF GND POINTS

1.00

1.00

MODIF. OF EQPT/WIRING 121VU

3.00

3.00

MODIF. OF EQPT/WIRING 93VU

5.00

5.00

MODIF. OF EQPT 94VU

0.50

0.50

MODIF. OF EQPT/WIRING 91VU

4.00

4.00

MODIF. OF WIRING 91VU/93VU

2.00

2.00

MODIF. OF WIRING 91VU/94VU

2.00

2.00

MODIF. OF WIRING 91VU/AVNCS

1.00

1.00

MODIF. OF WIRING 120VU/AVNCS

3.00

3.00

MODIF. OF WIRING 120VU/91VU

4.00

4.00

INSTL OF EQPT IN CKPT

3.00

3.00

INSTL OF EQPT IN AVNCS

5.00

5.00

TEST

4.50

4.50

CLOSEUP

4.00

4.00

1
5

0
TOTAL MANHOURS (MH)
ELAPSED TIME (ET)

10

20

51.0
38.5

25

30

35

40
ELAPSED TIME
(HOURS)

NOTE: THIS CHART IS ONLY A PROPOSAL.


OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.

MH: MANHOURS
ET: ELAPSED TIME
PER: NUMBER OF PERSONS

N_SB_321346_5_XXAB_01_01

Figure A-FXXAB - Sheet 01


Manpower Gantt Chart

15

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 3
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
REPORTING SHEET

TITLE:

LANDING GEAR - EXTENSION AND RETRACTION - INTRODUCE


POWER INTERRUPT PROTECTION CIRCUIT FOR LGCIUS

MODIFICATION No.:

37866J2818

Please complete the appropriate item (A or B):


A - SB WILL BE embodied
YES/NO (if NO please comment)
If YES, aircraft concerned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:

B - SB HAS BEEN embodied on aircraft:

Operator comments:

From Airline:
Name/Title:
Signature:

Date:

If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available
YES/NO
Or : Intermediate revision
YES/NO
Important Information: This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
-

Updating of maintenance documentation to show pre and post SB data.


Updating of maintenance and operational documentation to show post SB data after embodiment.

If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
FAX: (+33) 5 61 93 28 06
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB

- Quality rating of the Accomplishment Instructions

- Quality rating of the Illustrations

- Is this SB easy to understand ?

Y/N

If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning

Material

Instructions

X Effectivity

X Kit content

X Preparation

X Reason

X List of Materials Operator Supplied

X Mod/Inspection

X Manpower

X Industry support

X Test

X References

X Re-identification

X Close-Up

X Publication

X Tooling

X Illustrations

Comments:

Operator:

Date:

Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
FAX : (33) 5 61 93 42 51
Or via your Resident Customer Support Office.

DATE: Dec 04/08

SERVICE BULLETIN No.: A320-32-1346

REVISION No.: 09 - Nov 04/16


Printed in FRANCE

Page: 1
AIRBUS S.A.S. 2007. All rights reserved.

You might also like