Professional Documents
Culture Documents
Model A1D1-X
FRONT VIEW
FUNCTION
INSTRUCTION MANUAL
DIMENSIONS
NOTE: ALL DIMENSION ARE IN MM
Terminal Details
A1, A2
: Source Voltage
15, 16,18
: C1,NC1,NO1
25, 26,28
: C2,NC2,NO2
Contact Rating
CONNECTIONS
SIDE VIEW
Terminal block
Slide switches for range selection
Relay status LED
Time Tuning Pot
Range viewing Window
DISPOSITION
PROGRAMMING INSTRUCTION :
Select the range with the help of 2
slide switches on the side panel. The
selected range can be seen in the
windows on the front panel.
Set the required time by gently
rotating the Front pot with suitable
screw driver.
Apply rated voltage across A1 and
A2 terminals.
The LED glows and the time starts.
After the set time the LED goes off
and relay contact changes from NC
to NO.
Relay contacts remains in same
position, till power is interrupted.
7) Ensure Live Parts are not accessible after placing the protective cover.
8) Mount the product on DINRAIL and ensure the Spacing of 10mm
minimum between product to product.
9) During time setting and range selection ensure power is removed for
both source and load terminals.
10) Do not open the product at any instance since no user serviceable
parts inside.
CAUTION
Do not change the time range & set time while the timer is in
operation.
Switch off the power while changing the time range and set
time.
Application of voltage other than the specified one will
permanently damage the timer.
Do not forcibly rotate the pot. It will damage the timer.
CHECKED: B.S.Sridevi
24/05/2013
APPROVED: Kalavati
2405/2013