You are on page 1of 5

ALCATEL-LUCENT

7750 SERVICE ROUTER AND


7450 ETHERNET SERVICE SWITCH
ETHERNET MDA-XP, ETHERNET
MDA AND HS-MDA

The Alcatel-Lucent 7750 Service Router (SR) and 7450 Ethernet Service Switch (ESS) Ethernet
Media Dependent Adapter (MDA)-XPs, Ethernet MDAs and High Scale (HS)-MDAs deliver highdensity, high-performance Carrier Ethernet for business, mobile and residential applications.
By offering a wide range of Ethernet adapter types, interface options and advanced service
delivery capabilities, they provide the flexibility, performance and scalability needed to meet
the full range of service routing and Carrier Ethernet service requirements.

48-port 10/100/1000BASE-TX MDA-XP

20-port 1000BASE MDA-XP (SFP)

4-port 10GBASE MDA- XP (XFP)

1-port 10GBASE MDA with tunable optics


(DWDM tunable)

10-port 1000BASE HS-MDA (SFP)

Alcatel-Lucent Ethernet MDA-XPs, Ethernet


MDAs and HS-MDAs are available in a
wide selection of Fast Ethernet, Gigabit
Ethernet (GE) and 10 Gigabit Ethernet
(10GE) port configurations. Compliant with
IEEE 802.3 Ethernet standards, they are
ideal for highly scalable Carrier Ethernet
applications and services, including
mobile core and backhaul aggregation,
L2/L3 business virtual private networks
(VPNs) and broadband residential services
and content delivery networks (CDNs),
along with traditional IPv4/IPv6 routing
applications.

control. HS-MDAs are half-slot modules


and are ideal for operators with largescale residential and business service
deployments that require high scale and
fine granularity of queues for assured
delivery of multi-service applications,
including high-speed Internet, voice,
video and IPTV for individual subscribers.
They are also well suited for traditional
high-speed Internet (HSI) providers who
want to migrate legacy Broadband Remote
Access Server (BRAS) architectures to
a Broadband Network Gateway (BNG)
architecture based on the 7750 SR.

Alcatel-Lucent Ethernet MDA-XPs deliver


up to 25 Gb/s (full duplex) of line rate
throughput in a half-slot module with
advanced services fully enabled. Ethernet
MDAs deliver up to 10 Gb/s (full duplex) of
line-rate throughput in a half-slot module
with advanced services fully enabled. All
Ethernet adapter types support a wide
range of pluggable SFP and XFP optical
modules, and they include variants with
tunable optics to interface with DWDM
transport equipment, for a high degree
of configuration flexibility and service
optimization.

Ethernet MDA-XPs, Ethernet MDAs and


HS-MDAs are inserted into Input/Output
Modules (IOMs) with up to two Ethernet
adapter types per IOM, and they are
supported on all Alcatel-Lucent 7750 SR
and 7450 ESS chassis. For the 7750 SR-c12
and 7750 SR-c4 chassis types, Ethernet
adapters are inserted into MDA Carrier
Module (MCM)-XPs, which enable crossportfolio deployment of selected Ethernet
MDA types in the Alcatel-Lucent Service
Router family. All Ethernet adapter types
support in-service insertion and removal
and are managed by the Alcatel-Lucent
5620 Service Aware Manager (SAM).

Alcatel-Lucent HS-MDAs extend the servicerich capabilities of the Alcatel-Lucent


7750 SR and 7450 ESS to new levels
by offering industry-leading subscriber
and service density, with unprecedented
traffic management flexibility and

FEATURES AND BENEFITS

CWDM and DWDM equipment and those


with digital diagnostic monitoring (DDM)
capabilities for extended operations,
administration and maintenance (OAM)
and improved installation, activation and
troubleshooting capabilities. Support is
also provided for copper media types for
greater flexibility.

High-performance forwarding with a


line throughput rate per module of up to
25 Gb/s (full duplex) on Ethernet MDA-XPs
or 10 Gb/s (full duplex) on Ethernet MDAs
with advanced services enabled.
Ethernet MDA-XPs with optical interfaces
also support ITU-T standards-compliant
Synchronous Ethernet (Sync-E) for
distribution of precision network timing
and synchronization over Carrier Ethernet.
With Sync-E, operators can reliably deliver
time-sensitive applications directly over
native Ethernet. Ethernet MDA-XPs
with 10GE ports also support softwareselectable WAN or LAN interface options.
Support for a wide range of pluggable
optical modules (SFP and XFP) that
support a variety of black and white
wavelengths and distances, interface with

forward error correction (FEC) and


Sync-E. Framing options include LAN
PHY and WAN PHY modes. When used in
conjunction with Alcatel-Lucent optical
transport equipment, Wavelength Tracker
provides a powerful tool for streamlining
end-to-end monitoring and adjustment of
signal integrity across the network.

The 10GE Ethernet MDA with tunable


DWDM optics provides software
selection of wavelengths to enable direct
connection of the Alcatel-Lucent 7750 SR
and 7450 ESS with DWDM transport
equipment. This capability eliminates the
need for external optical transponder
shelves and reduces the complexity
of sparing and configuration. These
modules support 89 C-band wavelengths
configurable in 50 GHz increments,
standards-compliant ITU-T G.709 (OTU-2)

HS-MDAs support up to 20,000


subscribers with 160,000 ingress and
160,000 egress queues per MDA. As a
result, assured, policy-enforced delivery
of all subscriber applications allows end
users to enjoy the highest quality of
experience (QoE). An additional bufferpool hierarchy of 1 million ingress and
1 million egress buffers is also provided
for packet processing.

Table 1. 7750 SR and 7450 ESS Ethernet MDA-XP, Ethernet MDA and HS-MDA port density by chassis type
7750 SR

7450 ESS

SR-c4

SR-c12

SR-7

SR-12

SR-12e

ESS-6/6V

ESS-7

ESS-12

48-port 10/100/1000BASE-TX MDA-XP

N/A

N/A

480

960

864

384

480

960

20-port 1000BASE MDA-XP (SFP)

40

120

200

400

360

160

200

400

20-port 10/100/1000BASE-TX MDA-XP

40

120

200

400

360

160

200

400

12-port 1000BASE MDA-XP (SFP)

N/A

N/A

120

240

216

96

120

240

10-port 1000BASE MDA-XP (SFP)

20

60

100

200

180

80

100

200

4-port 10GBASE MDA- XP (XFP)

N/A

N/A

40

80

72

32

40

80

2-port 10GBASE MDA-XP (XFP)

12

20

40

36

16

20

40

1-port 10GBASE MDA-XP (XFP)

10

20

18

10

20

2-port 10GBASE + 12-port 1000BASE


MDA-XP (XFP/SFP) (combination)

N/A

N/A

20/120

40/240

36/216

16/96

20/120

40/240

60-port 10/100BASE-TX MDA

120

360

600

1200

1080

480

600

1200

20-port 100BASE-FX MDA (SFP)

40

120

200

400

360

160

200

400

1-port 10GBASE + 10-port 1000BASE MDA


(XFP/SFP) (combination)

N/A

N/A

10/100

20/200

18/180

8/80

10/100

20/200

N/A

N/A

10

20

18

10

20

N/A

N/A

100

200

180

80

100

200

ETHERNET MDA-XP

ETHERNET MDA

ETHERNET MDA WITH TUNABLE DWDM OPTICS

1-port 10GBASE MDA with tunable optics


(DWDM tunable)
HIGH SCALE MDA

10-port 1000BASE HS-MDA (SFP)

7750 Service Router and 7450 Ethernet Service Switch


ALCATEL-LUCENT DATA SHEET

Table 2. 7750 SR and 7450 ESS Ethernet MDA-XP, Ethernet MDA and HS-MDA ordering information
PART NAME

7750 SR
PART NUMBER

7450 ESS
PART NUMBER

DESCRIPTION

48-port
10/100/1000BASE-TX
MDA-XP

3HE05160AA

3HE05159AA

48-port 10/100/1000BASE-TX MDA-XP with eight (8)


mini-RJ-21 connectors. Accepts up to eight (8) cable
assemblies.

20-port 1000BASE MDA-XP


(SFP)

3HE03612AA

3HE03615AA

20-port 1000BASE Ethernet MDA-XP. Accepts up


to twenty (20) SFP GE-xx optical modules. Supports
10/100/1000BASE-TX operation with GE-TX SFP
optical modules.

20-port
10/100/1000BASE-TX
MDA-XP

3HE03613AA

3HE03616AA

20-port 1000BASE Ethernet MDA-XP with RJ-45


connectors.

12-port 1000BASE MDA-XP


(SFP)

3HE07284AA

3HE07285AA

12-port Gigabit Ethernet MDA-XP. Accepts up to


twelve (12) SFP GE-xx optical modules. Supports
10/100/1000BASE-TX operation with GE-TX SFP
optical modules.

10-port 1000BASE MDA-XP


(SFP)

3HE03611AA

3HE03614AA

10-port Gigabit Ethernet MDA-XP. Accepts up


to ten (10) SFP GE-xx optical modules. Supports
10/100/1000BASE-TX operation with GE-TX SFP optical
modules.

4-port 10GBASE MDA- XP


(XFP)

3HE03686AA

3HE03688AA

4-port 10GBASE Ethernet MDA-XP. Accepts up to four (4)


XFP 10GE optical modules.

2-port 10GBASE MDA-XP


(XFP)

3HE03685AA

3HE03687AA

2-port 10GBASE Ethernet MDA-XP. Accepts up to two (2)


XFP 10GE optical modules.

1-port 10GBASE MDA-XP


(XFP)

3HE0427AA

3HE04273AA

1-port 10GBASE Ethernet MDA-XP. Accepts one (1) XFP


10GE optical module.

2-port 10GBASE + 12-port


1000BASE MDA-XP (XFP/SFP)
(combination)

3HE07282AA

3HE07283AA

2-port 10GBASE + 12-port GE MDA-XP. Accepts two (2)


XFP optical module and up to twelve (12) SFP GE-xx
optical modules. Supports 10/100/1000BASE-TX operation
with GE-TX SFP optical modules.

60-port 10/100BASE-TX
MDA

3HE00021AA

3HE00230AA

60-port 10/100/BASE-TX MDA with five (5) mini-RJ-21


connectors. Accepts up to five (5) mini-RJ-21 cable
assemblies.

20-port 100BASE-FX MDA


(SFP)

3HE00023AA

3HE00231AA

20-port 1000BASE-FX Ethernet MDA. Accepts up to


twenty (20) SFP 100FX-xx optical modules. Supports
10/100/1000BASE-TX operation with GE-TX SFP
optical modules.

1-port 10GBASE MDA with


tunable optics (DWDM
Tunable)

3HE04179AA

3HE04181AA

1-port 10GE MDA with tunable ZW/R optical module.

1-port 10GBASE + 10-port


1000BASE MDA (XFP/SFP)
(combination)

3HE02021AA

3HE02022AA

1-port 10GBASE (LAN PHY) + 10-port GE MDA. Accepts


one (1) XFP optical module and up to ten (10) SFP GE-xx
optical modules. Supports 10/100/1000BASE-TX operation
with GE-TX SFP optical modules.

3HE06432AA

3HE06434AA

10-port Gigabit Ethernet High Scale (HS) MDA with


on-board queuing. Accepts up to ten (10) SFP GE-xx
optical modules.

ETHERNET MDA-XP

ETHERNET MDA

HIGH SCALE MDA

10-port 1000BASE HS-MDA


(SFP)

7750 Service Router and 7450 Ethernet Service Switch


ALCATEL-LUCENT DATA SHEET

TECHNICAL SPECIFICATIONS
(Applies to Ethernet MDA-XPs,
Ethernet MDAs and HS-MDAs,
unless otherwise noted)

Dimensions
Height: 3.6 cm (1.4 in.)
Width: 19.0 cm (7.5 in.)
Depth: 17.8 cm (7.0 in.)
Note: Dimensions are approximate and subject to
change. Refer to the appropriate Installation Guide
for the current weight and dimensions.

Weight
60-port 10/100BASE-TX MDA; 0.45kg
(1.0 lb)
48-port 10/100/1000BASE-TX MDA-XP ;
1.3kg (2.8 lb)
20-port 100BASE-FX MDA (SFP) ; 0.45kg
(1.0 lb)
20-port 10/100/1000BASE-TX MDA-XP ;
0.64kg (1.4 lb)

ITU-T Sync-E Standards Support


(all Ethernet MDA-XPs and 10GE MDA
with tunable optics)
ITU-T G.8261 g.pactiming Timing
and synchronization aspects of packet
networks
ITU-T G.8262 g.padlock Timing
characteristics of Ethernet equipment
slave clock (EEC)
ITU-T G.8263 g.padlock.bis For
synchronous status messaging (SSM)
ITU-T g.8264 g.pacmod Distribution
of timing through packet networks

Optical DDM compliance


SFF-8431
SFF-8472

Operating relative humidity: 5% to 85%


Operating altitude: Up to 4000 m
(13,000 ft) at 30C (86F)

Safety

2-port 10GE + 12-port GE MDA-XP


(XFP/SFP); 1.57 kg (3.5 lb)

EN 60950-1 2nd Ed CE-Mark

1-port 10GE + 10-port GE MDA (XFP/SFP)


(combination) ; 0.45kg (1.0 lb)

CSA/UL 60950-1 2nd Ed NRTL

1-port 10GE HS-MDA (XFP); 0.45kg (1.0 lb)


Note: Weights are approximate and subject to change.
Refer to the appropriate Installation Guide for the
current weights.

IEC 60950-1 2nd Ed CB Scheme


FDA CDRH 21-CFR 1040
IEC/EN 60825-1
IEC/EN 60825-2

EMC emission
ICES-003 Class A

Indicators

IEC/EN 61000-4-5 Surge


IEC/EN 61000-4-6 Conducted Immunity
IEC/EN 61000-4-8 Magnetic Immunity
IEC/EN 61000-4-11 Voltage Interruptions

Telecom
IEEE 802.3 (GE, Ethernet)
The 10GE MDA with tunable optics
and Ethernet MDA-XPs with add
the following:

ITU-T G.709

Operating temperature: 5C to 40C


(41F to 104F)

1-port 10GE MDA (XFP) ; 0.73kg (1.6 lb)

IEC/EN 61000-4-4 EFT

ITU-T G.707

10-port GE MDA-XP (SFP) ; 0.64kg (1.4 lb)

1-port 10GE MDA-XP with tunable optics


(DWDM ZW/R); 0.45kg (1.0 lb)

IEC/EN 61000-4-3 Radiated Immunity

(Ethernet MDA-XPs and 10GE MDA


with tunable optics)
SR OS software configurable

Environmental specifications

2-port 10GE MDA-XP (XFP); 0.77kg (1.7 lb)

IEC/EN 61000-4-2 ESD

ITU-T G.703

12-port GE MDA-XP (SFP); 1.40 kg (3.1 lb)

4-port 10GE MDA-XP (XFP) ; 0.95kg


(2.1 lb)

EN 55024

10 Gb/s WAN PHY interfaces

20-port GE MDA-XP (SFP) ; 0.64kg (1.4 lb)

10-port GE HS-MDA (SFP) ; 0.45kg (1.0 lb)

EMC immunity
EN 300 386

FCC Part 15 Class A

ITU-T G.813
ITU-T G.823
ITU-T G.824
ITU-T G.825
ITU-T G.957

Environmental
ETS 300 019-1-1 Storage Tests, Class 1.2
ETS 300 019-1-2 Transportation Tests,
Class 2.3
ETS 300 019-1-3 Operational Tests,
Class 3.2
ETS 300 019-2-4, pr A 1 Seismic
WEEE
RoHS
China CRoHS

Network Equipment Building


System (NEBS)
NEBS Level 3 Compliant
Telcordia GR-1089-CORE

Operational: Solid green

EN 55022 Class A

Fault: Amber

CISPR 22 Class A

Telcordia GR-295-CORE

AS/NZS CISPR 22

RBOC requirements

Note: Ethernet MDA-XP and Ethernet


MDAs with tunable optics add WAN PHY
mode and Laser Disable indicators

7750 Service Router and 7450 Ethernet Service Switch


ALCATEL-LUCENT DATA SHEET

Telcordia GR-63-CORE

VCCI Class A

ATT-TP-76200

BSMI Class A

VZ.TPR.9305

Table 3. 7750 SR and 7450 ESS 10GE MDA with tunable optics specifications
TRANSMITTER

Transmitter optical range

1528.77 nm to 1563.86 nm, 89 channels on 50 GHz ITU grid (191.7 THz to 196.1 THz)

Optical output power (standard mode)

+1 dBm to +5 dBm (nominal without additional power control)

Optical output power (in active power


control mode)

0 to -15 dBM (power can be set to any value within this range within 0.01 dB)
0.01 dB (power setting resolution)
+/- 0.5 dB (power control accuracy over life and temperature)

Path penalty

2 dB (at 1440 ps/nm)

RECEIVER

Receive power sensitivity

-24 dBm (BER 10^-12)

Receive power overload

-7 dBm (BER 10^-12)

Optical return loss

- 27 dB

Dispersion tolerance

0 to +1440 ps/nm (up to 2000 km transmission dependent upon amplified and


dispersion compensated fiber transport layer specifications)

Receive optical range

1290 nm to 1610 nm

OSNR tolerance*

19 dB (pre-FEC BER 10^-12 @ 0.1nm / Rx power -8 dBm to -20 dBm)


15 dB (pre-FEC BER 10^-5 @ 0.1nm / Rx power -8 dBm to -20 dBm)

FEC gain

6.2 dB (ITU-T G.709 standard gain)


>8 dB (EFEC enhanced gain)

FEC BER

<10^-15 (post-FEC BER when operating within FEC correction limits)

*Note: Pre-FEC BER OSNR tolerance values listed are based on FEC mode card operation.

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2012 Alcatel-Lucent. All rights reserved. M2012094230 (September)

You might also like