Professional Documents
Culture Documents
LDX 86 Series
XCU XF Universe
Check that the camera-system is set to
right video-mode!!
Slowmotion Video-Modes are dependent
of the Type of Camera and/or License:
LDX 86 HS = 3x only
LDX 86 XS = 3x & 6x
LDX 86 Universe = 3x & 6x
! HINT !
To check the right wiring: Select BARS
and replay slowly the recorded color bar:
3x SSM: 2 combined colors sequentially
move from left to right
6x USM: 6 independent colors
sequentially move from left to right
XCU Back-Panel
Replay Signal
3 physical BNC cables in all SSM or USM modes:
XT3 Back-Panel
3x SSM: Signal coded as 1,5G Signals, contains one Phase per cable.
6x USM: Signal coded as 3G-Level B Signals, contains 2x Phases per cable.
NOTE: each even Phase is line inverted, cannot be monitored
For all XCU Video configurations visit Knowledge Base: click here
This Document exemplary shows wiring and setting of a LDX 86 and EVS XT3 System. It shows the mostly used configuration of one LDX 86 6x USM camera + 2 Playout channels of an EVS XT3.
Please refer to the EVS Configuration Manual for other configurations. Monitoring and control are not shown in this document.
This is a snapshot, no guarantee, subject of changed when Software evolves. Please visit Grass Valley >Technical Support and EVS >Technical Area for support, manuals and installation documentation.
Version 20160211_3 kh