Professional Documents
Culture Documents
SX20 Quick Set components Recommended room setup Camera option A: PrecisionHD1080p12X
The following should be regarded as Camera Microphones Snap on the lens hood to Typical room scenario:
guidelines only. Try things out on-site prevent stray light from Medium to large
Place the camera at eye height to get the Place the microphone(s) as close to all
before fixing any mounting positions. disturbing your video meeting room.
best perceived eye contact. Typically, this meeting participants as possible. experience.
To learn more about how to optimize is about 1.2m (4ft) above the floor.
your office or meeting room for video Use the camera self view function to You can use the provided 70
conferencing, please read the Video make sure all participants are captured by camera bracket to place
conferencing room primer and Guidelines the camera. the camera on top of the
for video conferencing room acoustics monitor. Fasten the bracket
Aim for good illumination of a persons to the monitor with Velcro.
documents available on our web site.
face to avoid shadows. Also avoid direct
yy SX20 Codec yy HDMI cable for monitor light on the monitor to prevent reflections. The camera snaps to the
(1 default and 1 optional) magnets on the bracket.
yy Camera options
A: PrecisionHD1080p 12X yy Ethernet cable for LAN
B: PrecisionHD1080p 4XS2 yy VGA to DVI-A cable
for PC connectivity
C: PrecisionHD1080p 2.5X Camera option B: PrecisionHD1080p4XS2
yy Camera cable
yy Table Microphone 20
yy Power supply and You can use the provided Typical room scenario:
(1 default and 1 optional)
power cable camera bracket to place Medium sized
yy Remote control and the camera on top of the meeting room.
four AAA batteries yy Camera mounting bracket
monitor. Fasten the bracket
yy Touch 8 controller (optional) yy Microphone extension cable to the monitor with Velcro. 70
(optional)
yy Touch 10 controller (optional) The camera is fastened to
yy Codec wall mounting kit the bracket with a screw.
(optional)
Tool: 4mm Allen Key (not
provided).
In addition to the SX20 Quick Set you must provide a monitor or
projector, and a loudspeaker (external or built-in to the monitor) to
complete your video conferencing system.
A (A Class product declaration)
WARNING:
WARNING: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
This is a class A product. In a domestic environment this
adequate measures.
product may cause radio interference in which case the user may be
required to take adequate measures.
78-20385-02B SX20 Quick Set Installation Sheet | 2015 MARCH | 2011-2015 Cisco Systems, Inc. All rights reserved.
Installing Cisco TelePresence SX20 Quick Set
Ventilation 7 6
Do not block any ventilation openings;
minimum 8 / 3.15in. free space.
78-20385-02B SX20 Quick Set Installation Sheet | 2015 MARCH | 2011-2015 Cisco Systems, Inc. All rights reserved.