Professional Documents
Culture Documents
CODIGO: 2009-33183
TEMA: PHASE
FACULTAD: FAIN
TERCER AO
Tacna Per
Ao 2011
DATOS:
Lutita: marrn
Pe: 0.024 N/m2
Poisson: 0.30
Shotcrete: 0.40 m
Poisson: 0.18
Pernos de anclaje: 38 mm
Phase 2,5
Abrimos el Phase 2,5
PASO 1. NOMBRAMOS EL PROYECTO
a (enter) 0,15(enter)
c ( enter)
Cuando presionemos a aparecer:
PASO 4: DESCRITIZAMOS
Sigma 1: 20MPa
Sigma 3: 10MPa
Angulo de 30
PASO 7: DEFINIMOS LAS PROPIEDADES DE LOS MATERIALES EXTERIORES
DE EXCAVACIN
Name: lutita
Color : marron
Material type: isotropico
M. de young: 1581
poisson: 0.3
Interpret aceptar.
Vemos los esfuerzos y esfuerzos resultantes (y vemos la zona que necesita refuerzo)
VEMOS EL INFORME
Infoviewer
PASO 11: DEFINIMOS LAS PROPIEDADES DEL PENOS DE ANCLAJE
Ok..
PASO 12: DEFINIMOS LAS PROPIEDADES DEL SHOTCREATE
Nane: Shotcreate
Color: verde
Bean F. : Timishenko
Young modulus: 15 000
Poisson Ratio : 0.18
Elactic :
(ok)
Trabajo Santos
Project Settings
Groundwater
Method: Piezometric Lines
Pore Fluid Unit Weight: 0.00981
Field Stress
Mesh
Mesh Quality
Material Properties
Material: Lutita
Initial element loading: field stress only
Material type: isotropic
Young's modulus 1581 MPa
Poisson's ratio 0.3
Failure criterion: Mohr-Coulomb
Tensile strength 0.02 MPa
Peak friction angle 30 degrees
Peak cohesion 0.015 MPa
Material type: Plastic
Dilation Angle 0 degrees
Residual Friction Angle 20 degrees
Residual Cohesion 0.015 MPa
Liner Properties
Bolt Properties