You are on page 1of 7

No.

Description Unit Quantity Unit Price Amount sum


SERBIAN EMBASSY, ABUJA

II FUEL STORAGE
1.
Supply and installation of underground double
wall tank, entirely as per EN 12285-2 standard,
capacity 50m3, with manhole base for welding
and tank manhole of following dimensions
1.0m x 1.0m x 1.4m and 1.0m x 1.0m x 1.9m,
coated with basic paint and Kondor film #4mm,
with overlaps of 10 cm at joints, complete with
aluminum manhole cover. Aluminum cover
MUST be fitted with scissor type lifting to provide
open position. Tank manhole MUST be welded
on the base, along the entire length, to form
impermeable joint.
each 1.00 13,218,520.69 13,218,520.69

2. Supply of measuring rod each 1.00 125,000.00 125,000.00

3. Device for measuring fuel level in tank using


radar TDR level meter and liquid volume,
produced by KRONHE, type: OPTIFLEX 1300C
or similar with the same technical characteristics.
Item includes delivery and installation of device,
complete with electrical and signal connection.
Meter to be ordered as per the size of monthly
tank. each 1.00 1,558,000.00 1,558,000.00

Sub Total For Fuel Storage 14,901,520.69


No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA

III REFUELING SYSTEM

1. Supply, fabrication and installation of


reinforcement on the tank cover each 1.00 437,500.00 437,500.00
a) 3" black pipe with flange for refueling m 2.50 9,250.00 23,125.00

b) 6/4" galvanized pipe with attachment for


measuring fuel level by means of measuring rod
m 2.00 16,100.00 32,200.00
6/4" suction galvanized pipe with flange for
connection with suction basket cover at the end
for connection with pump m 2.00 28,656.25 57,312.50

d) 2" connecting galvanized pipe for air release


m 0.50 31,125.00 15,562.50
e)Treating of opening with flange for measuring
probe for electronic measurement of tank fuel
level each 1.00 57,087.50 57,087.50
Pipes for measurement, air release and refueling
to be welded, and fuel suction pipes to be
connected using flanges 123,312.50 123,312.50
Sealing to be carried out in a way that the hole
on the cover is sufficient for passage of suction
basket. Prior to mounting, suction basket should
be tested. Thread on pipes to be properly cut,
and connection to be carried out in a quality
manner. 109,375.00 109,375.00
4mm thick Klingerit (sealing material) to be used
for sealing tank cover. Item includes all material
and work complete. 1.00 23,625.00 23,625.00

2.
Electric motor fuel pump set, consisting of two
pumps (operating and stand-by), filters, mano-
vaccum gauge, counter-flanges, pressure limiting
valve, check valves, stop valves and pressure
gauge, produced by ALLWEILER-Germany or
similar, with following technical characteristics:
Model ZAS 550F
Capacity 550 l/h
Pressure 5 bar
Motor power 0.37 kW

each 1.00 5,725,000.00 5,725,000.00

3. Ultrasonic fuel flow (consumption) meter for


monthly tank, type: UFS 3000, size DN25,
explosion proof type, produced by KRONHE or
similar with same technical characteristics. Item
includes delivery and installation of device,
complete with electrical and signal connection.
each 1.00 2,822,500.00 2,822,500.00
No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA
4. Vertical float level switches, type: T/LL70 with two
positions, produced by FOZMULA, Great Britain
or similar with equivalent technical
characteristics. Item includes delivery and
mounting of pump control system for refueling,
complete with signaling connection. Switch
should be in compliance with dimension of daily
tank with 1" threaded connector. each 1.00 3,125,000.00 3,125,000.00

5. Manually operated vane fuel pump, with


threaded connection, capacity of 17-20 l/min. each 1.00 812,500.00 812,500.00
Assembly of fuel transfer piping: 331,250.00 331,250.00
No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA

6. Supply and installation of black seamless pipe for


fuel transport and bleeding of tank, including
application of bituminous waterproof strip
"Kondor" and laying down in the trench with 5,937,500.00 5,937,500.00
sand. m 2.00 28,125.00 56,250.00
6.1. size 3" (DN80)
6.2. size 2" (DN50) m 12.00 4,375.00 52,500.00
6.3. size 6/4" (DN40) m 110.00 4,375.00 481,250.00
6.4. size 5/4" (DN32) m 4.00 3,500.00 14,000.00
6.5. size 3/4" (DN20) m 12.00 3,125.00 37,500.00
6.6. size 1/2" (DN15) m 4.00 3,125.00 12,500.00

10. Supply and installation of galvanized steel


seamless pipes for bleeding of tanks, and fitting
of AT valves.
431,250.00 431,250.00
7.1. size 2" (DN50) m 10.00 4,375.00 43,750.00

8. Delivery and installation of rubber U cups for


penetration of DN40 pipes into manholes each 12.00 15,625.00 187,500.00

9. Delivery and installation of rubber U cups for


penetration of DN50 pipes into manholes each 2.00 31,250.00 62,500.00

10. Delivery and mounting of AT valves 2" each 2.00 56,250.00 112,500.00

11. Delivery and mounting of 6/4" check valves each 2.00 43,750.00 87,500.00

12. Delivery and mounting of 6/4" ball valves each 12.00 37,500.00 450,000.00

13. Delivery and mounting of 5/4" ball valves each 4.00 35,625.00 142,500.00

14. Delivery and mounting of 3/4" ball valves each 8.00 35,000.00 280,000.00

15. Delivery and mounting of 1/2" ball valves each 2.00 31,250.00 62,500.00

16. Delivery and mounting of angle check valve,


product of "OPW", DN40 NP6 each 2.00 81,875.00 163,750.00

17. Supply and mounting of plug connector (3") with


aluminum cap. each 2.00 73,250.00 146,500.00

18. Supply and mounting of 3" overfill prevention


valve (OPW or similar) each 1.00 406,250.00 406,250.00

19. Supply and mounting of solenoid , normally


closed on-off two port valve 1 1/4"- DN32
(ASCO or or similar ) Explosionproof and
Watertight Type working with 24V-AC. each 1.00 2,312,500.00 2,312,500.00

20. Testing of single wall piping for cold hydraulic


pressure (air release). each 1.00 50,000.00 50,000.00

21. Test of dielectric strength of water proofing


insulation after lowering into bund, including
issuing of appropriate report by an authorized
organization. each 1.00 312,500.00 312,500.00
No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA
No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA

22.
Supply and assembly of elastic reinforced hoses
with 1" connector for elastic connection of
pipework and connectors for refueling and
recovery on daily fuel tank, located in the diesel
generator stand, complete with all required
connecting material, entirely as per valid
regulations for this type of work and drawings.
each 8.00 603,906.25 4,831,250.00

Sub Total for Refueling System 30,369,600.00


IV TRANSPORT OF EQUIPMENT
1 Transport of tank from the manufacturer to
prepared pits for burying, including loading and
unloading. each 1.00 625,000.00 625,000.00

2 Transport of black, galvanized and polyethylene


pipes, tank covers and fittings, as well as welding
tools each 1.00 437,500.00 437,500.00

Sub Total for Transport of Equipment 1,062,500.00


V DOUBLE WALL CONTROL
1. Leak detection system for interstitial space of
underground double wall tank, operating with
underpressure, with sound and light signals,
display, type: "VL330", product of SGB, Germany
or similar with equivalent technical
characteristics. Item includes all required
material and additional equipment for connection
of connectors with interstitial space of tank.

complete 1.00 1,081,250.00 1,081,250.00

VI PREPARATORY-FINISHING OPERATIONS
1 Familiarization with design, scaling,
harmonization with actual conditions on site,
clearing of site, participation in final check and
acceptance of works by competent authorities
and inspections, making reports, certificates etc. lump
sum 562,500.00 562,500.00

2 lump
Survey of underground utility services sum 312,500.00 312,500.00
Provision of technical documents and certificates lump
by Contractor sum 312,500.00 312,500.00

Sub Total for Preparatory-Finishing


Operations 1,187,500.00
SUMMARY

II FUEL STORAGE 14,901,520.69


III REFUELING SYSTEM 30,369,600.00
IV TRANSPORT OF EQUIPMENT 1,062,500.00
V DOUBLE WALL CONTROL 1,081,250.00
VI PREPARATORY-FINISHING OPERATIONS 1,187,500.00
No. Description Unit Quantity Unit Price Amount sum
SERBIAN EMBASSY, ABUJA

You might also like