Professional Documents
Culture Documents
Laser Solutions
Tom Stirparo
Craig York
August 13, 2013
Everything3D Workshop
Laser Scanning
Has become the most efficient way
to capture existing conditions
Slide 2 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Using Laser Scans
Everything3D has an integrated Point Cloud Engine
No requirement for a Laser Model Interface [LMI] license
No additional software is needed
Laser model is stored as an AVEVA
LFM database
Slide 3 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Open Approach
HDS Series
IMAGER Series
- HDS 6200
- IMAGER 5006
- HDS 7000
- IMAGER 5010
Trimble FX
Trimble VX
Trimble CX
FARO Focus 3D
VZ-4000
VZ-1000
Topcon GLS-1500 VZ-400
Slide 4 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Processing Scanned Data
/pngs
Slide 7 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Everything3D Laser Interface
To import the Laser Model Database first create a zone.
From the FluentTM UI Home Tab select Access Laser to import the Laser
Model.
Select the Training Data Laser Model Data Set (GT_TRA.lfd) via the
Browser that is displayed.
This action will create an XGEOM (External Geometry) under your zone.
The Laser Data will be added to your display. You may need to adjust your
limits.
Slide 8 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Laser Scan - 3D ViewExample
Zen slide
Example
Zen slide
Laser Interface Bubble View
The Bubble View is a photographic 360 degree representation of the Laser
Data taken from the Camera Positions.
There are 2 methods for displaying the Bubble Views and these are
selected from the 3D Display.
Slide 10 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Laser Scan - BubbleView
Example
Zen slide
Example
Zen slide
Laser Interface Laser Tab
Select Low Density Points to remove Laser Data outside of your limits.
Slide 12 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Laser Interface Laser Tab contd
Slide 14 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Clash Checking including Laser Data
From the Obstruction pull-down select Laser Model in Display and Add
Slide 15 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Clash Checking including Laser Data contd
Select the Clashes tab, Navigate to a Design Item and select Check CE
Use Pick a Point on the Clash 3D display to display the BubbleView.
Slide 16 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Everything3D Laser Exercises
Hands on Exercises.
Slide 17 Copyright 2013 AVEVA Solutions Limited and its subsidiaries. All rights reserved.
Thank you