Professional Documents
Culture Documents
1
Table of Contents
01 Company Background
05 Product Categories
13 EEMUA
15 EEMUA 144
16 - Section 1
17 - Section 2
19 EEMUA 145
20 - Section 1A
22 - Section 1B
23 - Section 2A
23 - Section 2B
24 - Section 3
26 - Section 4
29 EEMUA 146
30 - Section 1
37 - Section 2
- Section 3
- Section 5
45 - Section 6
47 - Section 7
79 Reference
3
Company Background
1
COMPANY BACKGROUND
Nautic Steels Ltd, established in 1978 with current factory size of more than 100,000sq ft is strategically located
in Tamworth, Staffordshire, the industrial heart of the United Kingdom.
Nautic Steels is an ISO 9001:2008 certified Company and is one of the worlds leading manufacturers of pipes,
fittings, flanges and ancillary equipment with material grades of Nickel Alloys, Copper Nickel 90/10 and 70/30,
Austenitic Stainless Steels, 6Mo, Duplex and Super Duplex. Our products are widely used in Oil and Gas,
Onshore, Offshore, Chemical and Petrochemical, Marine and Shipbuidlings, Defence industries and Seawater
Systems including Fire Water, Desalination and Water Cooling Plants.
With more than 35 years of experience, Nautic Steels is fully committed to our philosophy of producing high
quality products, prompt delivery and continuous improvement to fulfil our customers needs.
Beside our excellent manufacturing capability, extensive knowledge and experience, we are also constantly
improving and expanding our product by investing in the research and development (R&D) in order to be relevant
to the industrys demand.
Our products are well accepted in the major Oil and Gas, Marine & Shipyard companies such as Adma, Aramco,
Norsok M-650, Petronas, Petrobas, Qatar Petroleum, Zadco and others.
Copper nickel has resistance to corrosion, especially for seawater that requires superior resistance to impingement
corrosion attack.
Application for:
Bilge and Ballast Systems
Cargo Heating Coils
Chemical Tanker Buildings
Fire Fighting Systems
Hydraulic and Pneumatic Systems
Insert-Gas Systems
Onshores
Offshores
5
PRODUCT CATEGORIES
We manufacture and stock a comprehensive of product range in Nickel Alloys, Duplex, Super Duplex,
Austenitic Stainless Steels, Copper Nickel 90/10 and 70/30 and 6Mo.
Pipes/Tubes
Seamless (1/2" to 16") and welded pipes/tubes (8" to 36") with wall thicknesses ranging from 2mm to 19mm.
Fittings
Butt-welded and forged fittings in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS.
Flanges
Flanges in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS. Classes vary from 150
up to 2500 lb.
Others
Olets, nipples, capillary, compression, socket weld.
PRODUCT RANGE
Tees
Reducers(Concentric/Eccentric)
End Caps
Saddles
Stub End
Threaded
TYPES OF MATERIAL
Alloys UNS Alloys UNS
Alloy 200/201 N02200/N02201 DUPLEX & Duplex 2205 S31803
9
QUALITY MANAGEMENT SYSTEM
Nautic Steels is committed to achieve high quality through state-of-art technology and equipment, and also
certified to ISO 9001:2008 quality management a high quality of products that are in accordance to national and
international standards and specifications.
All procedures are qualified to ASME IX, generally Lloyd's Register EMEA approval, giving a comprehensive
range of materials.
All personnel engaged in welding are qualified to ASME IX, these are checked and approved when required.
Welding processs used are T.I.G and M.M.A
TYPE OF TESTINGS
Elbows, Tees,
6" to 24" Welded Fittings
Reducers
Elbows, Tees,
3/4" to 6" Seamless Fittings Reducers and
End Caps
13
E
Se Se EM
ct ct
io io UA
n n
2 1 14
4
15
EEMUA 144 - Section 1
OD
ID
Seamless Pipe
Specified Wall Approx Length Theoretical
Size Thickness MTR. Weight/Metre
Nominal Specified 16 bar 20 bar 16 bar 20 bar
16 bar 20 bar
mm mm mm mm mm mm kg kg
1
/2 16 2.0 2.0 6 6 0.78 0.78
3
/4 25 2.0 2.0 6 6 1.29 1.29
Inspection of Welds
100% radiographic inspection to ASME code, Section VIII, UW51.
** For 16 and 20 bar systems the 76. 1mm pipe and component size is now referred to as 21/2" nominal and
to 88.9mm pipe and component size is referred to as 3" nominal. This is to bring the designations of theses
two sizes into line with national and international practice. The pipe sizes stated are toleranced on the ID as
per EEMUA 146 at the welding ends, to match the bores of components. Pipes are normally supplied with
plain ends.
Seam-Welded Pipe
Specified Wall Theoretical
Size Thickness Approx Weight/Metre
Length
Nominal Specified 16 bar 20 bar MTR. 16 bar 20 bar
mm mm mm mm kg kg
Se Se Se
ct ct ct
io io io
n n n
4 3 2B
19
EEMUA 145 - Section 1A
1.6mm 0.8
37 2 d3
d7
d3
d7 S1 h5
r2 h1
S1 h5
r2 h1
S2
S2 Square Square
r1 Corner r1 Corner
h2 h2
Type S d6 Type L d6
d4 d4
Type S Type L
Size d3 d4 d6 d7 h1 h1 h2 r1 r2 h5 S1 S2
in mm mm mm mm mm mm mm mm mm mm mm mm mm
1
/2 16 16 40 18 12.00 35 51 4 2 3 15 2.0 3.0
3
/4 25 25 50 27 21.00 40 51 5 3 3 15 2.0 3.0
1.6mm 0.8
37 2 d3
d7
d3
S1 h5 d7
r2 h1
S1 h5
r2 h1
S2
Square S2 Square
r1 Corner r1 Corner
h2 h2
Type L d6 Type S d6
d4 d4
Type S Type L
Size d3 d4 d6 d7 h1 h1 h2 r1 r2 h5 S1 S2
in mm mm mm mm mm mm mm mm mm mm mm mm mm
1
/2 16 16 40 18 12.00 35 51 4 2 3 15 2.0 3.0
3
/4 25 25 50 27 21.00 40 51 5 3 3 15 2.0 3.0
D
d2 d5
r=3mm R=3mm b
e
K
1 30 108 14 5
/8 15.9 33 79.4 4 3 1.0 1.04 1.0 1.04
1 1/4 38 117 14 5
/8 15.9 41 88.9 4 3 1.2 1.2 1.2 1.2
2 57 152 18 3
/4 19.0 62 120.6 4 3 2.5 2.6 2.5 2.6
3 88.9 190 19 3
/4 19.0 94 152.4 4 3 3.8 3.9 3.8 3.9
4 108 229 24 3
/4 19.0 113 190.5 8 3 6.6 6.9 6.6 6.9
6 159 279 27 /8
7
22.2 164 241.3 8 4 9.7 10.4 9.9 10.7
8 219.1 343 31 /8
7
22.2 225 298.4 8 5 15.0 16.7 15.1 17.0
14 368 533 45 1 1/8 28.6 374 476.2 12 7 44.7 53.4 45.5 55.8
16 419 597 51 1 1/8 28.6 426 539.8 16 7 60.0 70.5 60.6 72.5
18 457.2 635 52 1 1/4 31.8 465 577.8 16 7 66.0 78.0 68.0 84.3
20 508 698 58 1 1/4 31.8 517 635.0 20 7 84.4 98.7 86.0 103.5
24 610 813 71 1 3/8 34.9 618 749.3 20 9 131.4 149.8 134 156.5
D
d2 d5
r=3mm R=3mm b
t
K
d6
d1
r=1mm
Square h1
Corner
h2
d4
1.6mm 0.8 S1
d6
d3
37 2 h2
Square Corner
d2 h1
d7
K
D
DRILLING
Outside Hub Thickness Parallel
Diameter Thickness Diameter Diameter Length Bore of Hub at Length Diameter Diameter
of of of at Weld Through of Welding on of Bolt of Bolt Approx.
Flange Flange Hub Chamfer Hub Flange End Hub No. of
Circle Holes Total
Bolt
Size D b d6 d3 h1 d7 S1 min h2 K Holes d2 Weight
in mm mm mm mm mm mm mm mm mm mm mm kg
/2
1 16 89 14 23 16 48 12.0 2.0 8 60.3 4 15.9 0.72
/4
3 25 98 16 32 25 52 21.0 2.0 7 69.8 4 15.9 1.04
16 419 597 43 457 419 106 404.17 7.0 8 539.8 16 28.6 114.20
18 457.2 635 45 505 457.2 113 441.5 8.0 8 577.8 16 31.8 136.00
20 508 698 45 559 508 118 490.5 8.5 8 635.0 20 31.8 164.60
24 610 813 49 664 610 137 589.5 10.5 8 749.3 20 34.9 247.70
28 711 927 72 748 711 145 687.5 12.0 8 864 28 34.9 453.00
32 813 1060 72 876 813 160 786.5 13.5 8 978 28 41.1 599.00
36 914 1168 72 984 914 175 883.5 15.5 8 1086 32 41.1 741.00
1.6mm 0.8 S1
d6
d3
37 2 h2
Square Corner
d2 h1
d7
K
D
DRILLING
Outside Hub Thickness Parallel
Diameter Thickness Diameter Diameter Length Bore of Hub at Length Diameter Diameter
of of of at Weld Through of Welding on of Bolt of Bolt Approx.
Flange Flange Hub Chamfer Hub Flange End Hub No. of
Circle Holes Total
Bolt
Size D b d6 d3 h1 d7 S1 min h2 K Holes d2 Weight
in mm mm mm mm mm mm mm mm mm mm mm kg
/2
1 16 89 14 23 16 48 12.0 2.0 8 60.3 4 15.9 0.72
/4
3 25 98 16 32 25 52 21.0 2.0 7 69.8 4 15.9 1.04
16 419 597 43 457 419 106 399.84 9.0 8 539.8 16 28.6 115.60
18 457.2 635 45 505 457.2 113 438.5 9.5 8 577.8 16 31.8 140.70
20 508 698 45 559 508 118 486.5 11.0 8 635.0 20 31.8 168.40
24 610 813 49 664 610 137 584.5 13.0 8 749.3 20 34.9 253.70
28 711 927 72 748 711 145 681.5 15.0 8 864 28 34.9 461.10
32 813 1060 72 876 813 160 779.5 17.0 8 978 28 41.1 611.10
36 914 1168 72 984 914 175 876.5 19.0 8 1086 32 41.1 755.70
d6
r
d2
Square h
Corner b
d3
K
D
d2
h3=5mm
d4
K
D
1
/2 16 89 60.3 /8
5
15.9 9.5 40 4 0.82
3
/4 25 98 69.8 /8
5 15.9 11.1 50 4 1.04
1 30 108 79.4 5
/8 15.9 12.7 60 4 1.31
2 57 152 120.6 /4
3
19.0 17.4 99 4 3.01
29
EEMUA 146 - Section 1
ID
ID
T T
E t
E t t = intrados thickness (mlm)
in accordance with EEMUA
Publication No.146 Section 1
mm mm mm mm mm mm mm mm mm mm mm kg kg
88.9 2.5 2.5 53 51 49 116 114 112 0.65 0.65 1.25 1.25
108 3.0 3.0 66 64 62 154 152 150 1.0 1.0 2.10 2.10
159 3.0 3.5 97 95 93 231 229 227 2.3 2.7 4.70 5.50
219.1 4.0 4.5 129 127 125 307 305 303 6.0 6.5 12 13
457.2 8.0 9.5 289 286 283 689 686 683 54 64 109 128
508 8.5 11.0 321 318 315 765 762 759 71 92 142 184
610 10.5 13.0 384 381 378 917 914 911 126 156 252 312
711 12.0 15.0 441 438 435 1070 1067 1064 197 245 394 490
813 13.5 17.0 507 502 497 1224 1219 1214 289 362 579 725
914 15.5 19.0 570 565 560 1377 1372 1367 420 513 841 1026
t
b
a a
1 30 2.5 2.5 40 38 36
2 57 2.5 2.5 66 64 62
t b
a a
Centre-to-end (mm)
Centre-to-end (mm)
t1
Reducers I Eccentric
Type Weld Preparation
Eccentric reducers are either one-piece or Wall thickness and 1 of 3mm and greater are chamfered to
fabricated welded construction. 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.
Dimensions Inspection of Welds
Comply with EEMUA Publication No. 146 100% radiographic inspection to ASME Code Section VIII. UW51.
Section 1.
t1
Reducers I Concentric
Type Weld Preparation
Concentric reducers are either one-piece or Wall thickness and 1 of 3mm and greater are chamfered to
fabricated welded construction. 37 1/2 2 1/2 with a root face of 1.6mm 0.8mm.
Dimensions Inspection of Welds
Comply with EEMUA Publication No. 146 100% radiographic inspection to ASME Code Section VIII. UW51.
Section 1. Note
Reducers in sizes smaller than 57mm are available on request.
in mm mm mm mm mm kg kg
57 x 30 78 76 74 2.5 x 2.5 2.5 x 2.5 0.29 0.29
57 x 38 78 76 74 2.5 x 2.5 2.5 x 2.5 0.29 0.29
57 x 44.5 78 76 74 2.5 x 2.5 2.5 x 2.5 0.29 0.29
76.1 x 57 91 89 87 2.5 x 2.5 2.5 x 2.5 0.40 0.40
88.9 x 57 91 89 87 2.5 x 2.5 2.5 x 2.5 0.44 0.44
88.9 x 76.1 91 89 87 2.5 x 2.5 2.5 x 2.5 0.50 0.50
108 x 57 104 102 100 3.0 x 2.5 3.0 x 2.5 0.67 0.67
108 x 76.1 104 102 100 3.0 x 2.5 3.0 x 2.5 0.75 0.75
108 x 88.9 104 102 100 3.0 x 2.5 3.0 x 2.5 0.80 0.80
159 x 57 142 140 138 3.0 x 2.5 3.5 x 2.5 1.32 1.54
159 x 76.1 142 140 138 3.0 x 2.5 3.5 x 2.5 1.44 1.68
159 x 88.9 142 140 138 3.0 x 2.5 3.5 x 2.5 1.52 1.77
159 x 108 142 140 138 3.0 x 3.0 3.5 x 3.0 1.64 1.91
. 219.1 x 76.1 154 152 150 4.0 x 2.5 4.5 x 2.5 2.49 2.79
219.1 x 88.9 154 152 150 4.0 x 2.5 4.5 x 2.5 2.60 2.92
219.1 x 108 154 152 150 4.0 x 3.0 4.5 x 3.0 2.77 3.11
219.1 x 159 154 152 150 4.0 x 3.0 4.5 x 3.5 3.21 3.60
267 x 108 180 178 176 4.5 x 3.0 5.5 x 3.0 4.84 5.89
267 x 159 180 178 176 4.5 x 3.0 5.5 x 3.5 5.52 6.71
267 x 219.1 180 178 176 4.5 x 4.0 5.5 x 4.5 6.31 7.68
323.9 x 159 206 203 200 5.5 x 3.0 7.0 x 3.5 7.63 9.65
323.9 x 219.1 206 203 200 5.5 x 4.0 7.0 x 4.5 8.60 10.89
323.9 x 267 206 203 200 5.5 x 4.5 7.0 x 5.5 9.38 11.87
368 x 219.1 333 330 327 6.5 x 4.0 8.0 x 4.5 17.24 21.50
368 x 267 333 330 327 6.5 x 4.5 8.0 x 5.5 18.68 23.00
368 x 323.9 333 330 327 6.5 x 5.5 8.0 x 7.0 20.39 25.00
419 x 267 359 356 353 7.0 x 4.5 9.0 x 5.5 23.44 30.00
419 x 323.9 359 356 353 7.0 x 5.5 9.0 x 7.0 25.43 32.50
419 x 368 359 356 353 7.0 x 6.5 9.0 x 8.0 26.97 34.50
457.2 x 323.9 384 381 378 8.0 x 5.5 9.5 x 7.0 32.65 39.00
457.2 x 368 384 381 378 8.0 x 6.5 9.5 x 8.0 34.53 41.00
457.2 x 419 384 381 378 8.0 x 7.0 9.5 x 9.0 36.71 43.50
508 x 368 511 508 505 8.5 x 6.5 11.0 x 8.0 51.93 67.00
508 x 419 511 508 505 8.5 x 7.0 11.0 x 9.0 55.01 71.00
508 x 457.2 511 508 505 8.5 x 8.0 11.0 x 9.5 57.32 74.00
610 x 419 511 508 505 10.5 x 7.0 13.0 x 9.0 75.27 93.00
610 x 457.2 511 508 505 10.5 x 8.0 13.0 x 9.5 78.13 96.50
610 x 508 511 508 505 10.5 x 8.5 13.0 x 11.0 81.92 101.00
711 x 457.2 613 610 607 12.0 x 8.0 - 117.26 -
711 x 508 613 610 607 12.0 x 8.5 - 122.46 -
711 x 610 613 610 607 12.0 x 10.5 - 132.96 -
.
813 x 610 615 610 605 13.5 x 10.5 - 160.94 -
813 x 711 615 610 605 13.5 x 12.0 - 172.59 -
h1 h2
R1
R2
in mm mm mm mm mm mm mm kg kg
1 30 2.25 16.0 2.25 16.0 0.03 0.03
1 1/2 44.5 4.5 44.5 2.25 19.6 2.25 19.6 0.08 0.08
2 1/2 76.1 7.6 76.1 2.25 25.7 2.25 25.7 0.18 0.18
CAPILLARY END - N
SOCKET WELD - NS
25 30 13 1
/2 " x 16 mm 40 30 10
30 30 13 3
/4 " x 16 mm 43 36 10
38 30 13 3
/4 " x 25 mm 45 36 13
44.5 31 13 1" x 25 mm 47 46 13
57 38 16 1" x 30 mm 47 46 13
2" x 44.5 mm 53 70 13
1.R. REDUCING COUPLING
2" x 57 mm 56 70 16
Fitting Size Length Socket Depth
Type 2
mm mm mm 1
/2 " x 25 mm 43 36 13
30 x 16 31 13 x 10 1
/2 " x 30 mm 43 36 13
30 x 25 31 13 x 13 1
/2 " x 38 mm 43 46 13
38 x 16 32 13 x 10 3
/4 " x 30 mm 45 36 13
38 x 25 32 13 x 13 3
/4 " x 38 mm 45 46 13
38 x 30 32 13 x 13 1" x 38 mm 48 46 13
57 x 25 45 16 x 13
57 x 30 42 16 x 13
57 x 38 40 16 x 13
57 x 44.5 40 16 x 13
Section 2 & 3
TYPE 1 TYPE 2
CAPILLARY END - N
SOCKET WELD - NS
/2 " x 16 mm
1
40 27 10 Type 1
/2 " x 25 mm
1
43 38 13 30 x 30 26 10
/2 " x 30 mm
1
43 38 13 38 x 16 31 10
/2 " x 38 mm
1
43 46 13 38 x 25 30 13
/4 " x 16 mm
3
41 30 10 44.5 x 16 35 10
/4 " x 25 mm
3
44 38 13 44.5 x 25 33 13
/4 " x 30 mm
3
44 38 13 44.5 x 30 33 13
/4 " x 38 mm
3
44 46 13 57 x 30 38 13
1" x 30 mm 50 38 13 57 x 38 38 13
1" x 38 mm 50 46 13 Type 2
1" x 44.5 mm 51 55 16 25 x 16 13 10
1" x 57 mm 54 65 16 30 x 25 16 13
1 1/4 " x 30 mm 52 46 13 30 x 38 17 13
1 1/2 " x 57 mm 56 65 16
2" x 44.5 mm 56 65 13
2" x 57 mm 59 65 16
Section 2, 3 & 5
7. ADAPTOR
Parallel or taper Female thread x male end for insertion into fitting, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
CAPILLARY END - N
SOCKET WELD - NS
/2 " x 16 mm
1
40 30 1 1/4 " x 38 mm 55 54
/2 " x 25 mm
1
45 30 1 1/4 " x 44.5 mm 55 60
1
/2 " x 30 mm 45 36 1 1/4 " x 57 mm 55 60
1
/2 " x 38 mm 45 46 1 1/2 " x 44.5 mm 55 60
/2 " x 44.5 mm
1
50 50 1 1/2 " x 57 mm 55 60
/2 " x 57 mm
1
55 60 2" x 44.5 mm 59 70
/4 " x 16 mm
3
43 36 2" x 57 mm 63 70
3
/4 " x 25 mm 45 36
Section 2, 3 & 5
3
/4 " x 30 mm 45 36
3
/4 " x 38 mm 45 46
/4 " x 44.5 mm
3
50 50
3
/4 " x 57 mm 50 60
1" x 16 mm 55 41
1" x 25 mm 50 41
1" x 30 mm 50 41
1" x 38 mm 50 50
1" x 44.5 mm 50 50
1" x 57 mm 55 60
CAPILLARY END - N
SOCKET WELD - NS
1" x 25 mm 48 30
1" x 30 mm 48 36
1" x 38 mm 48 40
1" x 44.5 mm 52 46
1 1/4 " x 38 mm 51 46
1 1/2 " x 38 mm 53 50
1 1/2" x 44.5 mm 53 50
1 1/2 " x 57 mm 56 60
2" x 57 mm 56 65
Section 2, 3 & 5
CAPILLARY END - N
SOCKET WELD - NS
mm mm mm mm mm
16 10 24.5 16 10
25 13 37 25 13
30 13 37.5 30 13
38 13 42 38 13
44.5 13 51 44.5 13
57 16 63.5 57 16
CAPILLARY END - N
SOCKET WELD - NS
mm mm mm mm mm mm
16 10 20 25 x 16 10 20
25 13 28 30 x 16 13 28
30 13 29 30 x 25 13 28
38 13 35 38 x 16 13 35
44.5 13 40 38 x 25 13 35
57 16 49 38 x 30 13 35
44.5 x 25 13 40
61. STOP END 44.5 x 30 13 40
44.5 x 38 13 40
Fitting Size Socket Depth C to F
57 x 44.5 16 49
mm mm mm
57 x 16 16 49
16 14 10 57 x 25 16 49
25 17 13 57 x 30 16 49
30 17 13 57 x 38 16 49
38 18 13
Section 2 & 3
44.5 19 13
57 22 16
Section 2 & 3
68. STRAIGHT UNION ADAPTOR 69. HEXAGON MALE 70. MALE NIPPLE
Round nose. 1/4" - 2" Screwed. ADAPTOR Union Thread x parallel male thread,
16mm - 57mm N or NS. 60 Cone. 1/4" - 2" Screwed, N or NS.
CAPILLARY END - N
SOCKET WELD - NS
16 27 40 10 1
/2 " x 16 mm 40 10
25 34 50 13 3
/4 " x 25 mm 50 13
30 37 55 13 1" x 25 mm 55 13
38 37 65 13 1" x 30 mm 55 13
57 44 85 16 1 1/4 " x 38 mm 65 13
2" x 44.5 mm 85 13
Length AF
Fitting Size 2" x 57 mm 85 16
mm mm
Section 2, 3 & 5
/2 " x 1"
1
42 36
3
/4 " x 1 1/4 " 46 46
Section 5
CAPILLARY END - N
SOCKET WELD - NS
Length AF
Fitting Size
mm mm mm
1" x 25 mm 41 50
1 1/4 " x 25 mm 43 55
2" x 44.5 mm 44 70
Section 2 & 3
t
A
The bores of SRBC butt welded
type fittings are machined in
40 2 accordance with
37 2 R recommendations in EEMUA
Publication No 146: Section 6.
C
R = Radius of Header Pipe
Type Dimensions
Forgings from Cu Ni 90/10 standard stock. To EEMUA Publication No. 146: Section 6.
Design Weld Preparation
Suitable for 16 bar for temperatures up to and Wall thickness of 3mm and greater are chamfered
including 75C and 20 bar up to and including to 371/2 2 1/2 with a root face of 1.6mm 0.8mm.
. 38C.
Building-in dimensions for Lightweight - Butt Weld type (mm)
Branch Tube Size x Header Size Range A C Approx. Total Weight
mm mm mm kg
a a
A A
40 2 40 2
C C
Type Type
Forgings from 90/10 CuNi: Standard stock. Forgings from 90/10 CuNi: Standard stock.
Design Design
Suitable for 16 bar for temperatures up to and Suitable for 16 bar for temperatures up to and
including 75C and 20 bar up to and including 38C. including 75C and 20 bar up to and including 38C.
Dimensions Dimensions
To EEMUA Publication No. 146: Section 6. To EEMUA Publication No. 146: Section 6.
Socket tolerances are sufficient to allow capillary Note
brazing if preferred. Sizes for header diameters larger than 610mm are
available on request.
Building-in dimensions for Lightweight **The bores of threaded types are machined to
correspond to the bores of the above scheduled
Socket Welded/Brazed types (mm) pipe thickness.
Branch Header Approx.
Tube x Size A a C Total
o.d. Range nom min Weight
Building-in dimensions for Lightweight
Threaded types (mm)
mm mm mm mm kg
Branch Pipe** Header Approx.
16 x 16 25.4 10 15 0.07 Tube x Schedule x Size A a C Total
o.d. No. Range nom min Weight
16 x 25 to 44.5 25.4 10 18 0.06
23.8 18
mm mm mm mm mm mm kg
25 x 57 to 914 10 0.06
25 x 25 26.9 13 23 0.10 /2
1
160 (4.78) 25-44.5 25.4 13.5 21 0.08
30 x 30 33.3 13 29 0.17 /4
3 160 (5.56) 57-914 25.4 14 23 0.10
38 x 57 to 914 33.3 13 44 0.58 1 1/2 160 (7.14) 57-914 30.2 18.5 50 0.50
57 x 57 38.1 16 55 0.42
d
Root face 1.6mm 0.8mm
ID d
37 2 Slope 1:4
Shape for 45 min t
multiple b Round off
rx sharp edge
reductions Thickness of
fitting as made
ID d
Shape for
R t1* multiple b
L rx
reductions
SEAMLESS TYPE
Saddles
Saddle Pieces Construction Weld Preparation
One piece forgings or fabricated welded construction. Wall thickness of 3mm and greater
Dimensions are chamfered to 37 1/2 2 1/2 with a
To suit appropriate header and branch pipe diameters and thickness root face of 1.6mm 0.8mm.
for 16 bar and 20 bar rated systems to EEMUA Publication No. 146. Note
Weld Inspection For reducing saddles, will be the
100% radiographic inspection to ASME Code, Section VIII. UW51. same as specified branch pipe
thickness.
in mm mm mm mm mm mm
1 1/2 44.5 35 742.5 2.5 2.5 15
49
A
AS AS AS S M
M M M
E E E E/
B1 B1 B1
6. 6. 6. BS
5 48 11 / M
SS
M B A S
SS S SM P-
3
SP 79 E B 43
-4 9 16
3 .9
51
ASME - B16.11
G
W W P
L2 B L2
2
L2 B
B
D D
D
Coupling Half-Coupling Cap
ASME B16.11
End to End End to End Outside Min. End Well Min. Length
Couplings, Caps, Diameter, Thickness, of Thread
Nominal W P D G [Note (1)]
Pipe
DN Size 3000 and 6000 3000 6000 3000 6000 3000 6000 B L2
inches 1.26 0.75 ... 0.62 0.88 0.19 ... 0.25 0.2639
6 1
/8 mm 32 19 ... 16 22 4.8 ... 6.4 6.7
inches 1.38 1.00 1.06 0.75 1.00 0.19 0.25 0.32 0.4018
8 1
/4 mm 35 25 27 19 25 4.8 6.4 8.1 10.2
inches 1.50 1.00 1.06 0.88 1.25 0.19 0.25 0.36 0.4078
10 3
/8 mm 38 25 27 22 32 4.8 6.4 9.1 10.4
inches 1.88 1.25 1.31 1.12 1.50 0.25 0.31 0.43 0.5337
15 /2
1
mm 48 32 33 28 38 6.4 7.9 10.9 13.6
inches 2.00 1.44 1.50 1.38 1.75 0.25 0.31 0.50 0.5457
20 /4
3
mm 51 37 38 35 44 6.4 7.9 12.7 13.9
inches 2.38 1.62 1.69 1.75 2.25 0.38 0.44 0.58 0.6828
25 1
mm 60 41 43 44 57 9.7 11.2 14.7 17.3
inches 2.62 1.75 1.81 2.25 2.50 0.38 0.44 0.67 0.7068
32 1 1/4 mm 67 44 46 57 64 9.7 11.2 17.0 18.0
inches 3.12 1.75 1.88 2.50 3.00 0.44 0.50 0.70 0.7235
40 1 1/2
mm 79 44 48 64 76 11.2 12.7 17.8 18.4
inches 3.38 1.88 2.00 3.00 3.62 0.50 0.62 0.75 0.7565
50 2
mm 86 48 51 76 92 12.7 15.7 19.0 19.2
inches 3.62 2.38 2.50 3.62 4.25 0.62 0.75 0.93 1.138
65 2 1/2 mm 92 60 64 92 108 15.7 19.0 23.6 28.9
inches 4.25 2.56 2.69 4.25 5.00 0.75 0.88 1.02 1.200
80 3
mm 108 65 68 108 127 19.0 22.4 25.9 30.5
inches 4.75 2.69 2.94 5.50 6.25 0.88 1.12 1.09 1.300
100 4
mm 121 68 75 140 159 22.4 28.4 27.7 33.0
NOTE:
1. Class 2000 and DN6 class 6000 couplings, half couplings, and caps are not included in this Standard.
F F
B H G
D
A A
A A
A
ASME B16.11
Square Head Plugs Round Head Plugs Hex Plugs and Bushings
NOTE:
1. Coutionary Note Regarding Hex Bushings: Hex head bushings of one-size reduction should not be used in services
where they might be subject to harmful loads and forces other than internal pressures.
+20
Note (1)
+80
A
O O
B Wt
t
2mm
Note (2)
NOTES:
1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not
interfere with bolting between two flanges.
2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum, except when is less than 0.25 in., W, shall
equal .
Note (1)
A
O O
B Wt
t
Note (2)
NOTES:
t 1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not
interfere with bolting between two flanges.
l 2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum.
F
B
H
D E
G 1/16 = 1.6mm
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E F G Number H K Kilo
inches 3.50 0.88 0.44 0.62 1.19 1.38 0.62 2.38 0.9
1
/2 mm 88.9 22.3 11.1 15.9 30.2 34.9 4 15.9 60.3 0.4
inches 3.88 1.09 0.50 0.62 1.50 1.69 0.62 2.75 1.5
3
/4 mm 98.4 27.7 12.7 15.9 38.1 42.9
4
15.9 69.8 0.7
inches 4.25 1.36 0.56 0.69 1.94 2.00 0.62 3.12 1.8
1 4
mm 107.9 34.5 14.3 17.5 49.2 50.8 15.9 79.4 0.8
inches 4.62 1.70 0.62 0.81 2.31 2.50 0.62 3.50 2.4
1 1/4 mm 117.5 43.2 15.9 20.6 58.7 63.5 4 15.9 88.9 1.1
inches 5.00 1.95 0.69 0.88 2.56 2.88 0.62 3.88 3.1
1 1/2 mm 127.0 49.5 17.5 22.2 65.1 73.0 4 15.9 98.4 1.4
inches 6.00 2.44 0.75 1.00 3.06 3.62 0.75 4.75 4.8
2 mm 152.4 62.0 19.0 25.4 77.8 92.1 4 19.0 120.6 2.2
inches 7.00 2.94 0.88 1.12 3.56 4.12 0.75 5.50 7.9
2 1/2 mm 177.8 74.7 22.2 28.9 90.5 104.8 4 19.0 139.7 3.6
inches 7.50 3.57 0.94 1.19 4.25 5.00 0.75 6.00 9
3 4
mm 190.5 90.7 23.8 30.2 107.9 127.0 19.0 152.4 4.1
inches 8.50 4.07 0.94 1.25 4.81 5.50 0.75 7.00 11.4
3 1/2 mm 215.9 103.4 23.8 31.7 122.2 139.7 8 19.0 177.8 5.2
inches 9.00 4.60 0.94 1.31 5.31 6.19 0.75 7.50 12.3
4 8
mm 228.6 116.1 23.8 33.3 134.9 157.2 19.0 190.5 5.6
inches 10.0 5.66 0.94 1.44 6.44 7.31 0.88 8.50 13.9
5 8
mm 254.0 143.8 23.8 36.5 163.5 185.7 22.2 215.9 6.3
inches 11.00 6.72 1.00 1.56 7.56 8.50 0.88 9.50 16.5
6 8
mm 279.4 170.7 25.4 39.7 192.1 215.9 22.2 241.3 7.5
inches 13.50 8.72 1.12 1.75 9.69 10.62 0.88 11.75 27.7
8 8
mm 342.9 221.5 28.6 44.4 246.1 269.9 22.2 298.4 12.6
inches 16.00 10.88 1.19 1.94 12.00 12.75 1.00 14.25 40.7
10 12
mm 406.4 276.35 30.2 49.2 304.8 323.8 25.4 361.9 18.5
inches 19.00 12.88 1.25 2.19 14.38 15.00 1.00 17.00 1.6
12 12
mm 482.6 327.15 31.8 55.6 365.1 381.0 25.4 431.8 28
inches 21.00 14.14 1.38 2.25 15.75 16.25 1.12 18.75 79.2
14 12
mm 533.4 359.15 34.9 57.1 400.0 412.7 28.6 476.2 36
inches 23.50 16.16 1.44 2.50 18.00 18.50 1.12 21.25 101.2
16 16
mm 596.9 410.5 36.5 63.5 457.2 469.9 28.6 539.7 46
inches 25.00 18.18 1.56 2.69 19.88 21.00 1.25 22.75 110
18 16
mm 635.0 461.8 39.7 68.3 504.8 533.4 31.7 577.8 50
inches 27.50 20.20 1.69 2.88 22.00 23.00 1.25 25.00 140
20 20
mm 698.5 513.1 42.9 73.0 558.8 584.2 31.7 635.0 64
inches 32.00 24.25 1.88 3.25 26.12 27.25 1.38 29.50 196
24 mm 812.8 615.95 47.6 82.5 663.6 692.1 20 34.9 749.3 89
NB. Metric values are direct conversion from imperial sizes listed
F
B
H
D E
G 1/16 = 1.6mm
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E F G Number H K Kilo
inches 3.75 0.88 0.56 0.88 1.50 1.38 0.62 2.62 1.5
1
/2 mm 95.2 22.3 14.3 22.2 38.1 34.9 4 15.9 66.7 0.7
inches 4.62 1.09 0.62 1.00 1.88 1.69 0.75 3.25 2.4
3
/4 mm 117.5 27.7 15.9 25.4 47.6 42.9
4
19.0 82.5 1.1
inches 4.88 1.36 0.69 1.06 2.12 2.00 0.75 3.50 3.1
1 4
mm 123.8 34.5 17.5 27.0 54.0 50.8 19.0 88.9 1.4
inches 5.25 1.70 0.75 1.06 2.50 2.50 0.75 3.88 4.0
1 1/4 mm 133.3 43.2 19.0 27.0 63.5 63.5 4 19.0 98.4 1.8
inches 6.12 1.95 0.81 1.19 2.75 2.88 0.88 4.50 5.7
1 1/2 mm 155.6 49.5 20.6 30.2 69.8 73.0 4 22.2 114.3 2.6
inches 6.50 2.44 0.88 1.31 3.31 3.62 0.75 5.00 7.5
2 mm 165.1 62.0 22.2 33.3 84.1 92.1 8 19.0 127.0 3.4
inches 7.50 2.94 1.00 1.50 3.94 4.12 0.88 5.88 9.7
2 1/2 mm 190.5 74.7 25.4 38.1 100.0 104.8 8 22.2 149.2 4.4
inches 8.25 3.57 1.12 1.69 4.62 5.00 0.88 6.62 13.4
3 8
mm 209.5 90.7 28.6 42.9 117.5 127.0 22.2 168.3 6.1
inches 9.00 4.07 1.19 1.75 5.25 5.50 0.88 7.25 16.5
3 1/2 mm 228.5 103.4 30.2 44.4 133.4 139.7 8 22.2 184.1 7.5
inches 10.00 4.57 1.25 1.88 5.75 6.19 0.88 7.88 22.2
4 8
mm 254.0 116.1 31.8 47.6 146.0 157.2 22.2 200.0 10.1
inches 11.0 5.66 1.38 2.00 7.00 7.31 0.88 9.25 27.5
5 8
mm 279.4 143.8 34.9 50.8 177.8 185.7 22.2 234.9 12.5
inches 12.50 6.72 1.44 2.06 8.12 8.50 0.88 10.62 31.0
6 12
mm 317.5 170.7 36.5 52.4 206.4 215.9 22.2 269.9 14.1
inches 15.00 8.72 1.62 2.44 10.25 10.62 1.00 13.00 54.6
8 12
mm 381.0 221.5 41.3 61.9 260.3 269.9 25.4 330.2 24.8
inches 17.50 10.88 1.88 2.62 12.62 12.75 1.12 15.25 81.6
10 16
mm 444.52 76.35 47.6 66.7 320.7 323.8 28.6 387.3 37.1
inches 20.50 12.88 2.00 2.88 14.75 15.00 1.25 17.75 111
12 16
mm 520.7 327.15 50.8 73.0 374.6 381.0 31.7 450.8 50.0
inches 23.00 14.14 2.12 3.00 16.75 16.25 1.25 20.25 154
14 20
mm 584.2 359.15 54.0 76.2 425.4 412.7 31.7 514.3 70.0
inches 25.50 16.16 2.25 3.25 19.00 18.50 1.38 22.50 213
16 20
mm 647.7 410.5 57.2 82.5 482.6 469.9 34.9 571.5 97.0
inches 28.00 18.18 2.38 3.50 21.00 21.00 1.38 24.75 271
18 24
mm 711.2 461.8 60.3 88.9 533.4 533.4 34.9 628.5 123
inches 30.50 20.20 2.50 3.75 23.12 23.00 1.38 27.00 293
20 24
mm 774.7 513.1 63.5 95.2 587.4 584.2 34.9 685.8 133
inches 36.00 24.25 2.75 4.19 27.62 27.25 1.62 32.00 458
24 mm 914.4 615.95 69.8 106.4 701.7 692.1 24 41.3 812.8 203
NB. Metric values are direct conversion from imperial sizes listed
A
H
D
1/16 = 1.6mm
G
K
ASME B16.5
Approx
Raised Weight
Flange Face Drilling
Nominal Pounds
Size A D G Number H K Kilo
inches 3.50 0.44 1.38 0.62 2.38 0.9
1
/2 mm 88.9 11.1 34.9 4 15.9 60.3 0.4
inches 3.88 0.50 1.69 0.62 2.75 1.5
3
/4 mm 98.4 12.7 42.9
4 15.9 69.8 0.7
inches 4.25 0.56 2.00 0.62 3.12 2.0
1 4 0.9
mm 108.0 14.3 50.8 15.9 79.4
inches 4.62 0.62 2.50 0.62 3.50 2.9
1 1/4 mm 117.5 15.9 63.5 4 15.9 88.9 1.3
inches 5.00 0.69 2.88 0.62 3.88 3.5
1 1/2 mm 127.0 17.5 73.0 4 15.9 98.4 1.6
inches 6.00 0.75 3.62 0.75 4.75 5.7
2 mm 152.4 19.0 92.1 4 19.0 120.6 2.6
inches 7.00 0.88 4.12 0.75 5.50 9.0
2 1/2 mm 177.8 22.2 104.8 4 19.0 139.7 4.1
inches 7.50 0.94 5.00 0.75 6.00 11.0
3 4
mm 190.5 23.8 127.0 19.0 152.4 5.0
inches 8.50 0.94 5.50 0.75 7.00 14.1
3 1/2 mm 215.9 23.8 139.7 8 19.0 177.8 6.4
inches 9.00 0.94 6.19 0.75 7.50 15.6
4 8
mm 228.6 23.8 157.2 19.0 190.5 7.1
inches 10.0 0.94 7.31 0.88 8.50 19.8
5 8
mm 254.0 23.8 185.7 22.2 215.9 9.0
inches 11.00 1.00 8.50 0.88 9.50 26.0
6 8
mm 279.4 25.4 215.9 22.2 241.3 11.8
inches 13.50 1.12 10.62 0.88 11.75 46.2
8 8
mm 342.9 28.6 269.9 22.2 298.4 21.0
inches 16.00 1.19 12.75 1.00 14.25 66.0
10 12
mm 406.4 30.2 323.8 25.4 361.9 30.0
inches 19.00 1.25 15.00 1.00 17.00 99.0
12 12 45.0
mm 482.6 31.8 381.0 25.4 431.8
inches 21.00 1.38 16.25 1.12 18.75 130
14 12
mm 533.4 34.9 412.7 28.6 476.2 59
inches 23.50 1.44 18.50 1.12 21.25 173
16 16
mm 596.9 36.5 469.9 28.6 539.7 79
inches 25.00 1.56 21.00 1.25 22.75 213
18 16
mm 635.0 39.7 533.4 31.7 577.8 97
inches 27.50 1.69 23.00 1.25 25.00 273
20 20
mm 698.5 42.9 584.2 31.7 635.0 124
inches 32.00 1.88 27.25 1.38 29.50 414
24 mm 812.8 47.6 692.1 20 34.9 749.3 188
NB. Metric values are direct conversion from imperial sizes listed
A
H
D
1/16 = 1.6mm
G
K
ASME B16.5
Approx
Raised Weight
Flange Face Drilling
Nominal Pounds
Size A D G Number H K Kilo
inches 3.75 0.56 1.38 0.62 2.62 1.5
1
/2 mm 95.2 14.3 34.9 4 15.9 66.7 0.7
inches 4.62 0.62 1.69 0.75 3.25 2.6
3
/4 mm 117.5 15.9 42.9
4 19.0 82.5 1.2
inches 4.88 0.69 2.00 0.75 3.50 3.3
1 4 1.5
mm 123.8 17.5 50.8 19.0 88.9
inches 5.25 0.75 2.50 0.75 3.88 4.4
1 1/4 mm 133.3 19.0 63.5 4 19.0 98.4 2.0
inches 6.12 0.81 2.88 0.88 4.50 6.4
1 1/2 mm 155.6 20.6 73.0 4 22.2 114.3 2.9
inches 6.50 0.88 3.62 0.75 5.00 7.5
2 mm 165.1 22.2 92.1 8 19.0 127.0 3.4
inches 7.50 1.00 4.12 0.88 5.88 11.2
2 1/2 mm 190.5 25.4 104.8 8 22.2 149.2 5.1
inches 8.25 1.12 5.00 0.88 6.62 15.4
3 8
mm 209.5 28.6 127.0 22.2 168.3 7.0
inches 9.00 1.19 5.50 0.88 7.25 19.6
3 1/2 mm 228.5 30.2 139.7 8 22.2 184.1 8.9
inches 10.00 1.25 6.19 0.88 7.88 26.0
4 8
mm 254.0 31.8 157.2 22.2 200.0 11.8
inches 11.0 1.38 7.31 0.88 9.25 34.1
5 8
mm 279.4 34.9 185.7 22.2 234.9 15.5
inches 12.50 1.44 8.50 0.88 10.62 46.9
6 12
mm 317.5 36.5 215.9 22.2 269.9 21.3
inches 15.00 1.62 10.62 1.00 13.00 77.4
8 12
mm 381.0 41.3 269.9 25.4 330.2 35.2
inches 17.50 1.88 12.75 1.12 15.25 125
10 16
mm 444.5 47.6 323.8 28.6 387.3 57.0
inches 20.50 2.00 15.00 1.25 17.75 181
12 16 82.0
mm 520.7 50.8 381.0 31.7 450.8
inches 23.00 2.12 16.25 1.25 20.25 233
14 20
mm 584.2 54.0 412.7 31.7 514.3 106
inches 25.50 2.25 18.50 1.38 22.50 308
16 20
mm 647.7 57.2 469.9 34.9 571.5 140
inches 28.00 2.38 21.00 1.38 24.75 392
18 24
mm 711.2 60.3 533.4 34.9 628.5 178
inches 30.50 2.50 23.00 1.38 27.00 491
20 24
mm 774.7 63.5 584.2 34.9 685.8 223
inches 36.00 2.75 27.25 1.62 32.00 759
24 mm 914.4 69.8 692.1 24 41.3 812.8 345
NB. Metric values are direct conversion from imperial sizes listed
L
1/16 = 1.6mm
37
B
H E
F
D
1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E L F G Number H K Kilo
inches 3.50 0.44 1.88 0.84 1.19 1.38 0.62 2.38 1.1
1
/2 mm 88.9 11.1 47.6 21.3 30.2 34.9 4 15.9 60.3 0.5
inches 3.88 0.50 2.06 1.05 1.50 1.69 0.62 2.75 1.5
3
/4 mm 98.4 12.7 52.4 26.7 38.1 42.9
4
15.9 69.8 0.7
inches 4.25 0.56 2.19 1.32 1.94 2.00 0.62 3.12 2.4
1 4
mm 107.9 14.3 55.6 33.5 49.2 50.8 15.9 79.4 1.1
inches 4.62 0.62 2.25 1.66 2.31 2.50 0.62 3.50 3.3
1 1/4 mm 117.5 15.9 57.1 42.2 58.7 63.5 4 15.9 88.9 1.5
inches 5.00 0.69 2.44 1.90 2.56 2.88 0.62 3.88 4.0
1 1/2 mm 127.0 17.5 61.9 48.3 65.1 73.0 4 15.9 98.4 1.8
inches 6.00 0.75 2.50 2.38 3.06 3.62 0.75 4.75 6.0
2 mm 152.4 19.0 63.5 60.4 77.8 92.1 4 19.0 120.6 2.7
inches 7.00 0.88 2.75 2.88 3.56 4.12 0.75 5.50 9.8
2 1/2 mm 177.8 22.2 69.8 73.1 90.5 104.8 4 19.0 139.7 4.4
inches 7.50 0.94 2.75 3.50 4.25 5.00 0.75 6.00 11.5
3 4
mm 190.5 23.8 69.8 88.9 107.9 127.0 19.0 152.4 5.2
As Specified by Purchaser
inches 8.50 0.94 2.81 4.00 4.81 5.50 0.75 7.00 14.2
3 1/2 mm 215.9 23.8 71.4 101.6 122.2 139.7 8 19.0 177.8 6.4
inches 9.00 0.94 3.00 4.50 5.31 6.19 0.75 7.50 16.6
4 8
mm 228.6 23.8 76.2 114.3 134.9 157.2 19.0 190.5 7.5
inches 10.0 0.94 3.50 5.56 6.44 7.31 0.88 8.50 20.4
5 8
mm 254.0 23.8 88.9 141.2 163.5 185.7 22.2 215.9 9.2
inches 11.00 1.00 3.50 6.63 7.56 8.50 0.88 9.50 24.4
6 8
mm 279.4 25.4 88.9 168.4 192.1 215.9 22.2 241.3 11.0
inches 13.50 1.12 4.00 8.63 9.69 10.62 0.88 11.75 40.6
8 8
mm 342.9 28.6 101.6 219.6 246.1 269.9 22.2 298.4 18.3
inches 16.00 1.19 4.00 10.75 12.00 12.75 1.00 14.25 56.0
10 12
mm 406.4 30.2 101.6 273.0 304.8 323.8 25.4 361.9 25.0
inches 19.00 1.25 4.50 12.75 14.38 15.00 1.00 17.00 86.0
12 12
mm 482.6 31.8 114.3 323.8 365.1 381.0 25.4 431.8 39.0
inches 21.00 1.38 5.00 14.00 15.75 16.25 1.12 18.75 113
14 12
mm 533.4 34.9 127.0 355.6 400.0 412.7 28.6 476.2 51.0
inches 23.50 1.44 5.00 16.00 18.00 18.50 1.12 21.25 133
16 16
mm 596.9 36.5 127.0 406.4 457.2 469.9 28.6 539.7 60.0
inches 25.00 1.56 5.50 18.00 19.88 21.00 1.25 22.75 158
18 16
mm 635.0 39.7 139.7 457.2 504.8 533.4 31.7 577.8 71.0
inches 27.50 1.69 5.69 20.00 22.00 23.00 1.25 25.00 194
20 20
mm 698.5 42.9 144.5 508.0 558.8 584.2 31.7 635.0 88.0
inches 32.00 1.88 6.00 24.00 26.12 27.25 1.38 29.50 262
24 mm 812.8 47.6 152.4 609.6 663.6 692.1 20 34.9 749.3 119
NB. Metric values are direct conversion from imperial sizes listed
L
1/16 = 1.6mm
37
B
H E
F
D
1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E L F G Number H K Kilo
inches 3.75 0.56 2.06 0.84 1.50 1.38 0.62 2.62 1.8
1
/2 mm 95.2 14.3 52.4 21.3 38.1 34.9 4 15.9 66.7 0.8
inches 4.62 0.62 2.25 1.05 1.88 1.69 0.75 3.25 2.9
3
/4 mm 117.5 15.9 57.1 26.7 47.6 42.9
4
19.0 82.5 1.3
inches 4.88 0.69 2.44 1.32 2.12 2.00 0.75 3.50 3.7
1 4
mm 123.8 17.5 61.9 33.5 54.0 50.8 19.0 88.9 1.7
inches 5.25 0.75 2.56 1.66 2.50 2.50 0.75 3.88 4.8
1 1/4 mm 133.35 19.0 65.1 42.2 63.5 63.5 4 19.0 98.4 2.2
inches 6.12 0.81 2.69 1.90 2.75 2.88 0.88 4.50 7.0
1 1/2 mm 155.6 20.6 68.3 48.3 69.8 73.0 4 22.2 114.3 3.2
inches 6.50 0.88 2.75 2.38 3.31 3.62 0.75 5.00 7.9
2 mm 165.1 22.2 69.8 60.45 84.1 92.1 8 19.0 127.0 3.6
inches 7.50 1.00 3.00 2.88 3.94 4.12 0.88 5.88 11.9
2 1/2 mm 190.5 25.4 76.2 73.15 100.0 104.8 8 22.2 149.2 5.4
inches 8.25 1.12 3.12 3.50 4.65 5.00 0.88 6.62 16.3
3 8
mm 209.55 28.6 79.4 88.9 117.5 127.0 22.2 168.3 7.4
As Specified by Purchaser
inches 9.00 1.19 3.19 4.00 5.25 5.50 0.88 7.25 19.6
3 1/2 mm 228.6 30.2 81.0 101.6 133.35 139.7 8 22.2 184.15 8.9
inches 10.00 1.25 3.38 4.50 5.75 6.19 0.88 7.88 26.2
4 8
mm 254.0 31.8 85.7 114.3 146.05 157.2 22.2 200.0 11.9
inches 11.00 1.38 3.88 5.56 7.00 7.31 0.88 9.25 35.2
5 8
mm 279.4 34.9 98.4 141.2 177.8 185.7 22.2 234.95 16.0
inches 12.50 1.44 3.88 6.63 8.12 8.50 0.88 10.62 44.8
6 12
mm 317.5 36.5 98.4 168.4 206.4 215.9 22.2 269.9 20.2
inches 15.00 1.62 4.38 8.63 10.25 10.62 1.00 13.00 68.8
8 12
mm 381.0 41.3 111.1 219.6 260.35 269.9 25.4 330.2 31.0
inches 17.50 1.88 4.62 10.75 12.62 12.75 1.12 15.25 97.5
10 16
mm 444.5 47.6 117.5 273.05 320.7 323.8 28.6 387.3 44.3
inches 20.50 2.00 5.12 12.75 14.75 15.00 1.25 17.75 141
12 16
mm 520.7 50.8 130.2 323.85 374.6 381.0 31.7 450.8 64.0
inches 23.00 2.12 5.62 14.00 16.75 16.25 1.25 20.25 194
14 20
mm 584.2 54.0 142.9 355.6 425.4 412.7 31.7 514.3 88.0
inches 25.50 2.25 5.75 16.00 19.00 18.50 1.38 22.50 249
16 20
mm 647.7 57.2 146.05 406.4 482.6 469.9 34.9 571.5 113
inches 28.00 2.38 6.25 18.00 21.00 21.00 1.38 24.75 295
18 24
mm 711.2 60.3 158.75 457.2 533.4 533.4 34.9 628.6 134
inches 30.50 2.50 6.38 20.00 23.12 23.00 1.38 27.00 376
20 24
mm 774.7 63.5 161.9 508.0 587.4 584.2 34.9 685.8 171
inches 36.00 2.75 6.62 24.00 27.62 27.25 1.62 32.00 524
24 mm 914.4 69.8 168.3 609.6 701.7 692.1 24 41.3 812.8 238
NB. Metric values are direct conversion from imperial sizes listed
F
B
H
D E
r
K
A
ASME B16.5
Approx
Nominal Weight
Pipe Flange Hub Radius Drilling
Pounds
Size A B D E F r Number H K Kilo
inches 3.50 0.90 0.44 0.62 1.19 0.12 0.62 2.38 0.9
/2
1
mm 88.9 22.9 11.1 15.9 30.2 3.20 4 15.9 60.3 0.4
inches 3.88 1.11 0.50 0.62 1.50 0.12 0.62 2.75 1.5
/4
3
mm 98.4 28.2 12.7 15.9 38.1 3.20
4
15.9 69.8 0.7
inches 4.25 1.38 0.56 0.69 1.94 0.12 0.62 3.12 1.8
1 4
mm 107.9 35.05 14.3 17.5 49.2 3.20 15.9 79.4 0.8
inches 4.62 1.72 0.62 0.81 2.31 0.19 0.62 3.50 2.4
1 1/4 mm 117.5 43.7 15.9 20.6 58.7 48.0 4 15.9 88.9 1.1
inches 5.00 1.97 0.69 0.88 2.56 0.25 0.62 3.88 3.1
1 1/2 mm 127.0 50.0 17.5 22.2 65.1 6.35 4 15.9 98.4 1.4
inches 6.00 2.46 0.75 1.00 3.06 0.31 0.75 4.75 4.8
2 mm 152.4 62.5 19.0 25.4 77.8 7.90 4 19.0 120.6 2.2
inches 7.00 2.97 0.88 1.12 3.56 0.31 0.75 5.50 7.9
2 1/2 mm 177.8 75.4 22.2 28.6 90.5 7.90 4 19.0 139.7 3.6
inches 7.50 3.60 0.94 1.19 4.25 0.38 0.75 6.00 9.0
3 4
mm 190.5 91.4 23.8 30.2 107.9 9.50 19.0 152.4 4.1
inches 8.50 4.10 0.94 1.25 4.81 0.38 0.75 7.00 11.4
3 1/2 mm 215.9 104.1 23.8 31.7 122.2 9.50 8 19.0 177.8 5.2
inches 9.00 4.60 0.94 1.31 5.31 0.44 0.75 7.50 12.3
4 8
mm 228.6 116.8 23.8 33.3 134.9 11.1 19.0 190.5 5.6
inches 10.0 5.69 0.94 1.44 6.44 0.44 0.88 8.50 13.9
5 8
mm 254.0 144.5 23.8 36.5 163.5 11.1 22.2 215.9 6.3
inches 11.00 6.75 1.00 1.56 7.56 0.50 0.88 9.50 16.5
6 8
mm 279.4 171.45 25.4 39.7 192.1 12.7 22.2 241.3 7.5
inches 13.50 8.75 1.12 1.75 9.69 0.50 0.88 11.75 27.7
8 8
mm 342.9 222.25 28.6 44.4 246.1 12.7 22.2 298.4 12.6
inches 16.00 10.92 1.19 1.94 12.00 0.50 1.00 14.25 40.7
10 12
mm 406.4 277.4 30.2 49.2 304.8 12.7 25.4 361.9 18.5
inches 19.00 12.92 1.25 2.19 14.38 0.50 1.00 17.00 61.6
12 12
mm 482.6 328.2 31.8 55.6 365.1 12.7 25.4 431.8 28.0
inches 21.00 14.18 1.38 3.12 15.75 0.50 1.12 18.75 79.2
14 12
mm 533.4 360.2 34.9 79.4 400.0 12.7 28.6 476.2 36.0
inches 23.50 16.19 1.44 3.44 18.00 0.50 1.12 21.25 101.2
16 16
mm 596.9 411.2 36.5 87.3 457.2 12.7 28.6 539.7 46.0
inches 25.00 18.20 1.56 3.81 19.88 0.50 1.25 22.75 110.0
18 16
mm 635.0 462.3 39.7 96.8 504.8 12.7 31.7 577.8 50.0
inches 27.50 20.25 1.69 4.06 22.00 0.50 1.25 25.00 140.0
20 20
mm 698.5 514.35 42.9 103.2 558.8 12.7 31.7 635.0 64.0
inches 32.00 24.25 1.88 4.38 26.12 0.50 1.38 29.50 196.0
24 mm 812.8 615.95 47.6 111.1 663.6 12.7 20 34.9 749.3 89.0
NB. Metric values are direct conversion from imperial sizes listed
F
B
H
D E
r
K
A
ASME B16.5
Approx
Nominal Weight
Pipe Flange Hub Radius Drilling
Pounds
Size A B D E F r Number H K Kilo
inches 3.75 0.90 0.56 0.88 1.50 0.12 0.62 2.62 1.5
/2
1
mm 95.2 22.9 14.3 22.2 38.1 3.20 4 15.9 66.7 0.7
inches 4.62 1.11 0.62 1.00 1.88 0.12 0.75 3.25 2.4
/4
3
mm 117.5 28.2 15.9 25.4 47.6 3.20
4
19.0 82.5 1.1
inches 4.88 1.38 0.69 1.06 2.12 0.12 0.75 3.50 3.1
1 4
mm 123.8 35.05 17.5 27.0 54.0 3.20 19.0 88.9 1.4
inches 5.25 1.72 0.75 1.06 2.50 0.19 0.75 3.88 4.0
1 1/4 mm 133.3 43.7 19.0 27.0 63.5 48.0 4 19.0 98.4 1.8
inches 6.12 1.97 0.81 1.19 2.75 0.25 0.88 4.50 5.7
1 1/2 mm 155.6 50.0 20.6 30.2 69.8 6.35 4 22.2 114.3 2.6
inches 6.50 2.46 0.88 1.31 3.31 0.31 0.75 5.00 7.5
2 mm 165.1 62.5 22.2 33.3 84.1 7.90 8 19.0 127.0 3.4
inches 7.50 2.97 1.00 1.50 3.94 0.31 0.88 5.88 9.7
2 1/2 mm 190.5 75.4 25.4 38.1 100.0 7.90 8 22.2 149.2 4.4
inches 8.25 3.60 1.12 1.69 4.62 0.38 0.88 6.62 13.4
3 8
mm 209.5 91.4 28.6 42.9 117.5 9.50 22.2 168.3 6.1
inches 9.00 4.10 1.19 1.75 5.25 0.38 0.88 7.25 16.5
3 1/2 mm 228.5 104.1 30.2 44.4 133.4 9.50 8 22.2 184.1 7.5
inches 10.00 4.60 1.25 1.88 5.75 0.44 0.88 7.88 22.2
4 8
mm 254.0 116.8 31.8 47.6 146.0 11.1 22.2 200.0 10.1
inches 11.00 5.69 1.38 2.00 7.00 0.44 0.88 9.25 27.5
5 8
mm 279.4 144.5 34.9 50.8 177.8 11.1 22.2 234.9 12.5
inches 12.50 6.75 1.44 2.06 8.12 0.50 0.88 10.62 31.0
6 12
mm 317.5 171.45 36.5 52.4 206.4 12.7 22.2 269.9 14.1
inches 15.00 8.75 1.62 2.44 10.25 0.50 1.00 13.00 54.6
8 12
mm 381.0 222.25 41.3 61.9 260.3 12.7 25.4 330.2 24.8
inches 17.50 10.92 1.88 3.75 12.62 0.50 1.12 15.25 81.6
10 16
mm 444.5 277.4 47.6 95.2 320.7 12.7 28.6 387.3 37.1
inches 20.50 12.92 2.00 4.00 14.75 0.50 1.25 17.75 111.0
12 16
mm 520.7 328.2 50.8 101.6 374.6 12.7 31.7 450.8 50.0
inches 23.00 14.18 2.12 4.38 16.75 0.50 1.25 20.25 154.0
14 20
mm 584.2 360.2 54.0 111.1 425.4 12.7 31.7 514.3 70.0
inches 25.50 16.19 2.25 4.75 19.00 0.50 1.38 22.50 213.0
16 20
mm 647.7 411.2 57.2 120.65 482.6 12.7 34.9 571.5 97.0
inches 28.00 18.20 2.38 5.12 21.00 0.50 1.38 24.75 271.0
18 24
mm 711.2 462.3 60.3 130.2 533.4 12.7 34.9 628.5 123.0
inches 30.50 20.25 2.50 5.50 23.12 0.50 1.38 27.00 293.0
20 24
mm 774.7 514.35 63.5 139.7 587.4 12.7 34.9 685.9 133.0
inches 36.00 24.25 2.75 6.00 27.62 0.50 1.62 32.00 458.0
24 mm 914.4 615.95 69.8 152.4 701.7 12.7 24 41.3 812.8 208.0
NB. Metric values are direct conversion from imperial sizes listed
H
D E
1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E F G Number H K Kilo
inches 3.50 0.44 0.62 1.19 1.38 0.62 2.38 0.9
1
/2 mm 88.9 11.1 15.9 30.2 34.9 4 15.9 60.3 0.4
inches 3.88 0.50 0.62 1.50 1.69 0.62 2.75 1.5
3
/4 mm 98.4 12.7 15.9 38.1 42.9
4
15.9 69.8 0.7
inches 4.25 0.56 0.69 1.94 2.00 0.62 3.12 2.0
1 4
mm 107.9 14.3 17.5 49.2 50.8 15.9 79.4 0.9
inches 4.62 0.62 0.81 2.31 2.50 0.62 3.50 2.6
1 1/4 mm 117.5 15.9 20.6 58.7 63.5 4 15.9 88.9 1.2
inches 5.00 0.69 0.88 2.56 2.88 0.62 3.88 3.3
1 1/2 mm 127.0 17.5 22.2 65.1 73.0 4 15.9 98.4 1.5
No Counter Bore Required on 150 lb. Threaded Flanges
NB. Metric values are direct conversion from imperial sizes listed
F
B
H
D E
1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B D E F G Number H K Kilo
inches 3.75 0.93 0.56 0.88 1.50 1.38 0.62 2.62 1.5
1
/2 mm 95.2 23.6 14.3 22.2 38.1 34.9 4 15.9 66.7 0.7
inches 4.62 1.14 0.62 1.00 1.88 1.69 0.75 3.25 2.6
3
/4 mm 117.5 28.95 15.9 25.4 47.6 42.9
4
19.0 82.5 1.2
inches 4.88 1.41 0.69 1.06 2.12 2.00 0.75 3.50 3.1
1 4
mm 123.8 35.8 17.5 27.0 54.0 50.8 19.0 88.9 1.4
inches 5.25 1.75 0.75 1.06 2.50 2.50 0.75 3.88 4.2
1 1/4 mm 133.35 44.45 19.0 27.0 63.5 63.5 4 19.0 98.4 1.9
inches 6.12 1.98 0.81 1.19 2.75 2.88 0.88 4.50 6.2
1 1/2 mm 155.6 50.5 20.6 30.2 69.8 73.0 4 22.2 114.3 2.8
inches 6.50 2.50 0.88 1.31 3.31 3.62 0.75 5.00 7.3
2 mm 165.1 63.5 22.2 33.3 84.1 92.1 8 19.0 127.0 3.3
inches 7.50 3.00 1.00 1.50 3.94 4.12 0.88 5.88 10.1
2 /2
1
mm 190.5 76.2 25.4 38.1 100.0 104.8 8 22.2 149.2 4.6
inches 8.25 3.63 1.12 1.69 4.62 5.00 0.88 6.62 13.9
3 8
mm 209.55 92.2 28.6 42.9 117.5 127.0 22.2 168.3 6.3
inches 9.00 4.13 1.19 1.75 5.25 5.50 0.88 7.25 17.2
3 /2
1
mm 228.6 104.9 30.2 44.4 133.35 139.7 8 22.2 184.15 7.8
inches 10.00 4.63 1.25 1.88 5.75 6.19 0.88 7.88 22.4
4 8
mm 254.0 117.6 31.8 47.6 146.05 157.2 22.2 200.0 10.2
inches 11.0 5.69 1.38 2.00 7.00 7.31 0.88 9.25 28.4
5 8
mm 279.4 144.5 34.9 50.8 177.8 185.7 22.2 234.95 12.9
inches 12.50 6.72 1.44 2.06 8.12 8.50 0.88 10.62 33.0
6 12
mm 317.5 171.45 36.5 52.4 206.4 215.9 22.2 269.9 15.0
inches 15.00 8.75 1.62 2.44 10.25 10.62 1.00 13.00 57.2
8 12
mm 381.0 222.25 41.3 61.9 260.35 269.9 25.4 330.2 26
inches 17.50 10.88 1.88 2.62 12.62 12.75 1.12 15.25 82.6
10 16
mm 444.5 276.35 47.6 66.7 320.7 323.8 28.6 387.3 37.5
inches 20.50 12.94 2.00 2.88 14.75 15.00 1.25 17.75 114
12 16
mm 520.7 328.7 50.8 73.0 374.6 381.0 31.7 450.8 52.0
inches 23.00 14.19 2.12 3.00 16.75 16.25 1.25 20.25 158
14 20
mm 584.2 360.4 54.0 76.2 425.4 412.7 31.7 514.3 72.0
inches 25.50 16.19 2.25 3.25 19.00 18.50 1.38 22.50 220.0
16 20
mm 647.7 411.2 57.2 82.5 482.6 469.9 34.9 571.5 100.0
inches 28.00 18.19 2.38 3.50 21.00 21.00 1.38 24.75 277.0
18 24
mm 711.2 462.0 60.3 88.9 533.4 533.4 34.9 628.5 126.0
inches 30.50 20.19 2.50 3.75 23.12 23.00 1.38 27.00 304.0
20 24
mm 774.7 512.8 63.5 95.2 587.4 584.2 34.9 685.8 138.0
inches 36.00 24.19 2.75 4.19 27.62 27.25 1.62 32.00 469.0
24 mm 914.4 614.4 69.9 106.4 701.7 692.1 24 41.3 812.8 213.0
NB. Metric values are direct conversion from imperial sizes listed
F
B1
H
C
D E
B 1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B B1 C D E F G Number H K Kilo
inches 3.50 0.62 0.88 0.38 0.44 0.62 1.19 1.38 0.62 2.38 0.9
1
/2 mm 88.9 15.7 22.35 9.50 11.1 15.9 30.2 34.9 4 15.9 60.3 0.4
inches 3.88 0.82 1.09 0.44 0.50 0.62 1.50 1.69 0.62 2.75 1.5
3
/4 mm 98.4 20.8 27.7 11.1 12.7 15.9 38.1 42.9 4 15.9 69.8 0.7
inches 4.25 1.05 1.36 0.50 0.56 0.69 1.94 2.00 0.62 3.12 2.0
1 4 79.4 0.9
mm 107.9 26.7 34.5 12.7 14.3 17.5 49.2 50.8 15.9
inches 4.62 1.38 1.70 0.56 0.62 0.81 2.31 2.50 0.62 3.50 2.6
1 1/4 mm 117.5 35.05 43.2 14.3 15.9 20.6 58.7 63.5 4 15.9 88.9 1.2
inches 5.00 1.61 1.95 0.62 0.69 0.88 2.56 2.88 0.62 3.88 3.3
1 /2
1
mm 127.0 40.9 49.5 15.9 17.5 22.2 65.1 73.0 4 15.9 98.4 1.5
inches 6.00 2.07 2.44 0.69 0.75 1.00 3.06 3.62 0.75 4.75 5.1
2 mm 152.4 52.6 62.0 17.5 19.0 25.4 77.8 92.1 4 19.0 120.6 2.3
inches 7.00 2.47 2.94 0.75 0.88 1.12 3.56 4.12 0.75 5.50 8.1
2 /2
1
mm 177.8 62.7 74.7 19.0 22.3 28.6 90.5 104.8 4 19.0 139.7 3.7
inches 7.50 3.07 3.57 0.81 0.94 1.19 4.25 5.00 0.75 6.00 9.2
3 4
mm 190.5 78.0 90.7 20.6 23.8 30.2 107.9 127.0 19.0 152.4 4.2
NB. Metric values are direct conversion from imperial sizes listed
F
B1
H
C
D E
B 1/16 = 1.6mm
G
K
A
ASME B16.5
Approx
Raised Weight
Flange Hub Face Drilling
Nominal Pounds
Size A B B1 C D E F G Number H K Kilo
inches 3.75 0.62 0.88 0.38 0.56 0.88 1.50 1.38 0.62 2.62 1.5
1
/2 mm 95.2 15.7 22.35 9.50 14.3 22.2 38.1 34.9 4 15.9 66.7 0.7
inches 4.62 0.82 1.09 0.44 0.62 1.00 1.88 1.69 0.75 3.25 2.6
3
/4 mm 117.5 20.8 27.7 11.1 15.9 25.4 47.6 42.9 4 19.0 82.5 1.2
inches 4.88 1.05 1.36 0.50 0.69 1.06 2.12 2.00 0.75 3.50 3.1
1 4 88.9 1.4
mm 123.8 26.7 34.5 12.7 17.5 27.0 54.0 50.8 19.0
inches 5.25 1.38 1.70 0.56 0.75 1.06 2.50 2.50 0.75 3.88 4.2
1 1/4 mm 133.35 35.05 43.2 14.3 19.0 27.0 63.5 63.5 4 19.0 98.4 1.9
inches 6.12 1.61 1.95 0.62 0.81 1.19 2.75 2.88 0.88 4.50 6.2
1 /2
1
mm 155.6 40.9 49.5 15.9 20.6 30.2 69.8 73.0 4 22.2 114.3 2.8
inches 6.50 2.07 2.44 0.69 0.88 1.31 3.31 3.62 0.75 5.00 7.3
2 mm 165.1 52.6 62.0 17.5 22.2 33.3 84.1 92.1 8 19.0 127.0 3.3
inches 7.50 2.47 2.94 0.75 1.00 1.50 3.94 4.12 0.88 5.88 10.1
2 /2
1
mm 190.5 62.7 74.7 19.0 25.4 38.1 100.0 104.8 8 22.2 149.2 4.6
inches 8.25 3.07 3.57 0.81 1.12 1.69 4.62 5.00 0.88 6.62 13.9
3 8
mm 209.55 78.0 90.7 20.6 28.6 42.9 117.5 127.0 22.2 168.3 6.3
NB. Metric values are direct conversion from imperial sizes listed
A
A
B
A
A
B
Center-to-End
Nominal Pipe Size Outside Diameter 90 Deg LR 45 Deg LR 90 Deg SR
[NPS] DN at Bevel Elbows, A Elbows, B Elbows, A
in mm mm mm mm mm
1
/2 15 21.3 38 16 -
3
/4 20 26.7 38 19 -
1 25 33.4 38 22 25
1 1/4 32 42.2 48 25 32
1 1/2 40 48.3 57 29 38
2 50 60.3 76 35 51
2 1/2 65 73.0 95 44 64
3 80 88.9 114 51 76
D1 D1
T1 T1
T M T M
D D
C C C C
x1 33.4 48 x2 60.3 76
1 /2 x 1 /2
1 1
48.3 48.3 57 57 4 x4 114.3 114.3 105 105
x1 33.4 57 x3 88.9 98
x2 60.3 105
D1 D1
T1 T1
T M T M
D D
C C C C
D1 D1
T1 T1
H H
T T
D D
E or E1
T 1D
0D
Nominal Pipe Size Outside Diameter Length [1] Limiting Wall Thickness Length [2]
[NPS] at Bevel E for Length E E1
in mm mm mm mm
1
/2 21.3 25 4.57 25
3
/4 26.7 25 3.81 25
1 33.4 38 4.57 38
2 60.3 38 5.59 44
3 88.9 51 7.62 64
4 114.3 64 8.64 76
5 141.3 76 9.65 89
Notes:
(1) Length E applies for thickness not exceeding that given in column Limiting Wall Thickness for Length E.
(2) Length E1 applies for thickness greater than that given in column Limiting Wall Thickness for NPS 24
(DN 600) and smaller. For NPS 26 (DN 65) and larger, lenght E1 shall be by agreement between
manufacturer and purchaser.
Q Q
Q Q
Q
A A
Tees
Q
Q Q
A
This end flush against square
in mm mm mm mm mm mm mm mm mm mm mm
/2 to 21/2
1
+1.6, -0.8 0.8 3 1 2 2 3 2 2 3
3 to 4 1.6 1.6
Not Less 3 1 2 2 3 2 2 3
than
5 to 8 +2.4, -1.6 1.6 87.5% 6 2 4 2 3 2 2 6
of
10 to 12 +4.0, -3.2 3.2 nominal 6 3 5 2 3 2 2 6
General Notes:
Tolerances are equal plus and minus except as noted.
Notes:
(1) Out-of-round is the sum of absolute values of plus and minus tolerance.
.
(2) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.
Wall thickness tolerance applies throughout the fittings.
(3) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter,
which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
D
37.5 deg 2.5 deg
t 22 (0.88) max. 19 (0.75)
D
General Notes:
(a) Dimensions in parentheses are in inches.
(b) Other domensions are in millimeters.
E
B
)
Fittings I BS 3799
* Thickness and outside diameters of swage nipples shall correspond to those of the appropriate nominal pipe size.
R G
2 2.375 60.3 6 152.4 0.312 7.94 3.625 92.1 2.456 62.4 2.344 59.5
2 1/2 2.875 73.0 6 152.4 0.312 7.94 4.125 104.8 2.966 75.3 2.844 72.2
3 3.500 88.9 6 152.4 0.375 9.53 5.000 127.0 3.596 91.3 3.469 88.1
3 1/2 4.000 101.6 6 152.4 0.375 9.53 5.500 139.7 4.096 104.0 3.969 100.8
4 4.500 114.3 6 152.4 0.437 11.11 6.187 157.2 4.593 116.7 4.469 113.5
5 5.563 141.3 8 203.2 0.437 11.11 7.312 185.7 5.683 144.3 5.532 140.5
6 6.625 168.3 8 203.2 0.500 12.7 8.500 215.9 6.743 171.3 6.594 167.5
8 8.625 219.1 8 203.2 0.500 12.7 10.625 269.9 8.743 222.1 8.594 218.3
10 10.750 273.0 10 254.0 0.500 12.7 12.750 323.9 10.913 277.2 10.719 272.3
12 12.750 323.8 101 254.0 0.500 12.7 15.000 381.0 12.913 328.0 12.719 323.0
14 14.000 355.6 121 304.8 0.500 12.7 16.250 412.8 14.170 359.9 13.969 354.8
16 16.000 406.4 121 304.8 0.500 12.7 18.500 469.9 16.180 411.0 15.969 405.6
18 18.000 457.2 121 304.8 0.500 12.7 21.000 533.4 18.190 462.0 17.969 456.4
20 20.000 508.0 121 304.8 0.500 12.7 23.000 584.2 20.240 514.1 19.969 507.2
22 22.000 558.8 121 304.8 0.500 12.7 25.250 641.4 22.240 564.9 21.969 558.0
24 24.000 609.6 121 304.8 0.500 12.7 27.250 692.2 24.240 615.7 23.969 608.8
The minimum lap thickness (T) shall not be less than nominal pipe wall thickness.
1 When used with the higher pressure flanges it may be necessary to increase the length of stub ends in sizes
12in. and larger. Such increase in length shall be a matter of agreement between the manufacturer and
purchaser.
2 These dimensions conform to the radius established for lap-joint flanges in American National Standard Steel
Pipe Flanges and Flanged Fittings (ASME B16.5).
3 This dimension conforms to standard machined facings shown in the American National Standard Steel Pipe
Flanges and Flanged Fittings (ASME B16.5). The back face of the lap shall be machined to conform to the
surface on which it seats. Where ring joint facings are to be applied use dimension K as given in ASME B16.5.
4 When special facings such as tongue-groove, male-female, etc., are employed, additional lap thickness must
be provided and such additional thickness shall be in addition (not to be included in) the basic length F.
LAP-JOINT SLIP-ON
FLANGE FLANGE
Note 1 Note 1
Square Corner Square Corner
G G
Radius A Radius B
F F
/2
1 0.840 21.34 1.375 34.9 2.000 50.8 0.125 3.18 0.031 0.79
/4
3 1.050 26.6 1.687 42.9 2.000 50.8 0.125 3.18 0.031 0.79
1 1.315 33.4 2.000 50.8 2.000 50.8 0.125 3.18 0.031 0.79
1 1/4 1.660 42.1 2.500 63.5 2.000 50.8 0.187 4.76 0.031 0.79
1 1/2 1.900 48.1 2.875 73.0 2.000 50.8 0.250 6.35 0.031 0.79
2 2.375 60.3 3.625 92.1 2.500 63.5 0.312 7.94 0.031 0.79
2 1/2 2.875 73.0 4.125 104.8 2.500 63.5 0.312 7.94 0.031 0.79
3 3.500 88.9 5.000 127.0 2.500 63.5 0.375 9.53 0.031 0.79
3 1/2 4.000 101.6 5.500 139.7 3.000 76.2 0.375 9.53 0.031 0.79
4 4.500 114.3 6.187 157.2 3.000 76.2 0.437 11.11 0.031 0.79
5 5.563 141.3 7.312 185.7 3.000 76.2 0.437 11.11 0.062 1.59
6 6.625 168.3 8.500 215.9 3.500 88.9 0.500 12.7 0.062 1.59
8 8.625 219.1 10.625 269.9 4.000 101.6 0.500 12.7 0.062 1.59
10 10.750 273.0 12.750 323.9 5.000 127.0 0.500 12.7 0.062 1.59
12 12.750 323.8 15.000 381.0 6.000 152.4 0.500 12.7 0.062 1.59
14 14.000 355.6 16.250 412.8 6.000 152.4 0.500 12.7 0.062 1.59
16 16.000 406.4 18.500 469.9 6.000 152.4 0.500 12.7 0.062 1.59
18 18.000 457.2 21.000 533.4 6.000 152.4 0.500 12.7 0.062 1.59
20 20.000 508.0 23.000 584.2 6.000 152.4 0.500 12.7 0.062 1.59
24 24.000 609.6 27.250 692.2 6.000 152.4 0.500 12.7 0.062 1.59
* These lengths and radii for use with Schedule 40S or thinner pipe.
Note 1. The minimum lap thickness shall not be less than nominal pipe wall thickness.
Note 2. Contact faces of stub ends shall have a modified spiral or concentric serration.
79
REFERENCE
Seamless Pipes & Fittings Chemical Composition %
Nickel Alloys
ASTM B161 ASTM B161 ASTM B165 ASTM B167 ASTM B167 ASTM B444
PIPES UNSN02200 UNSN02201 UNSN04400 UNSN06600 UNSN06601 UNSN06625
ASTM B366 ASTM B366 ASTM B366 ASTM B366 ASTM B366 ASTM B366
FITTINGS
UNSN02200 UNSN02201 UNSN04400 UNSN06600 UNSN06601 UNSN06625
Element Min Max Min Max Min Max Min Max Min Max Min Max
Columbium (Col) -
- - - - - - - - - - 4.150
+ Tantalum (Ta)
Vanadium (V) - - - - - - - - - - - -
Nickel Alloys
ASTM B407 ASTM B407 ASTM B407 ASTM B407 ASTM B423 ASTM B622 ASTM B622
PIPES UNSN08801 UNSN08810 UNSN08800 UNSN08811 UNSN08825 UNSN06022 UNSN10276
ASTM B366 ASTM B366 ASTM B366 ASTM B366 ASTM B366 ASTM B366 ASTM B366
FITTINGS
UNSN08801 UNSN08810 UNSN08800 UNSN08811 UNSN08811 UNSN06022 UNSN10276
Element Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Nickel (Ni) 30.000 34.000 30.000 35.000 30.000 35.000 30.000 35.000 38.000 46.000 Balance - Balance -
Iron (Fe) 39.500 - 39.500 - 39.500 - 39.500 - 22.00 - 2.000 6.000 4.000 7.000
Carbon (C) - 0.100 0.050 0.100 - 0.100 0.060 0.100 - 0.050 - 0.015 - 0.010
Chromium (Cr) 19.000 22.000 19.000 23.000 19.000 23.000 19.000 23.000 19.500 23.500 20.000 22.500 14.500 16.500
Titanium (Ti) 0.750 1.500 0.150 0.600 0.150 0.600 0.150 0.600 0.600 1.200 - - - -
Columbium (Col)
- - - - - - - - - - - - - -
+ Tantalum (Ta)
Nickel (Ni) 4.500 6.500 4.500 6.500 6.00 8.000 6.00 8.000
Chromium (Cr) 21.000 23.000 22.000 23.000 24.00 26.000 24.00 26.000
Molybdenum (Mo) 2.500 3.500 3.000 3.500 3.000 5.000 3.000 4.000
Nitrogen (N) 0.080 0.200 0.140 0.200 0.240 0.320 0.200 0.300
Carbon ( C ) - 0.050
The minimum iron content has been selected to improve erosion resistance.
* Impurities are elements other than copper (including silver) iron, nickel (including cobalt) and manganese.
** Determind on finished tube outside of heat affected zone (HAZ)
Type of fitting Size range 38C 50C 75C 100C 38C 50C 75C 100C
1in/30mm to
Use 20 bar 20.0 19.7 18.6 17.3
Butt welding 4in/108mm
fittings
6in/159mm to
16.0 16.0 16.0 15.7 20.0 19.7 18.6 17.3
36in/914mm
Compression in/16mm to
fittings 2in/57mm * * * *
88
www.nautic.co.uk