Professional Documents
Culture Documents
CATALOG
& DESIGN
GUIDE
DIODE
Transient Voltage Suppression
(TVS) Diode Products
Littelfuse Circuit Prot
Solutions Portf
Consumer Electronics Telecom White Goods Medical Equipment TVSS and Power S
DESIGN SUPPORT
Live Application Design and Technical SupportTap into our expertise. Littelfuse engi-
neers are available around the world to help you address design challenges and develop
unique, customized solutions for your products.
Product Sampling ProgramsMost of our products are available as samples for testing and
verication within your circuit design. Visit Littelfuse.com or contact a Littelfuse product
representative for additional information.
Product Evaluation Labs and ServicesLittelfuse global labs are the hub of our new
product development initiatives, and also provide design and compliance support testing
as an added-value to our customers.
3 5 7
OVERCURRENT
PROTECTION
TECHNOLOGIES (7-8)
7. Positive Temperature
Coefcient Devices (PTCs)
Provide resettable overcurrent
protection for a wide range of
applications.
4 6 8
8. Fuses Full range including
surface mount, axial, glass or
ceramic, thin-lm or Nano2
style, fast-acting or SloBlo,
MINI and ATO fuses.
Littelfuse offers the widest range of TVS Diodes and other circuit protection products.
Littelfuse TVS Diodes are ideal for protecting semiconductor components from
high-voltage transients. They can respond to overvoltage events faster than most
other types of circuit protection. This makes TVS Diodes useful for protecting against
very fast and often damaging voltage transients, such as lightning, inductive load
switching and electrostatic discharge.
Littelfuse TVS Diodes can t a wide range of circuit protection applications but were
primarily designed to protect I/O interfaces in telecommunication and industrial
equipment, computers and consumer electronics.
Features
tLow incremental surge resistance
tUnidirectional and Bidirectional polarities available
t Reverse standoff voltages range from 5 to 512V
t RoHS compliantMatte Tin Pb-free plated
t Surface-mount power ratings from 400W to 5,000W
t Axial lead power ratings from 400W to 30,000W (30kW)
t High current protection available for 6kA and 10kA
Transient Voltage Suppression Diodes
TVS Diode Products
TVS Diode Series Series SMAJ P4SMA SACB SMBJ P6SMB 1KSMB SMCJ 1.5SMC SMDJ 5.0SMDJ
Photo
Package Type DO-214AC DO-214AC DO-214AA DO-214AA DO-214AA DO-214AA DO-214AB DO-214AB DO-214AB DO-214AB
12-170
Reverse Standoff uni-directional
5.0-440 5.8-495 5.0-50 5.0-440 5.8-495 5.8-136 5.0-440 5.8-495 5.0-170
Voltage (VR) 12-45
bi-directional
Maximum Clamping
Refer to electrical characteristics table within each series data sheet
Voltage (VC)
RoHS Compliant Yes
Pb Lead-Free Yes
Type Axial Leaded - Standard Applications (400-5000W) Axial Leaded - High Power Auto
Series P4KE SA SAC P6KE 1.5KE LCE 3KP 5KP 15KPA 20KPA 30KPA AK6 AK10 SLD
Photo
Maximum Clamping
Refer to electrical characteristics table within each series data sheet
Voltage (VC)
Pb Lead-Free Yes
based on 10/1000s pulse unless stated otherwise
VOLTAGE CURRENT RISE-TIME DURATION Most vehicles now also employ multiple electronic
Lighting 25kV 20kA 10 s 1ms systems to control the engine, climate, braking and, in
some cases, steering, traction and safety systems.
Switching 600V 500A 50s 500ms
EMP 1kV 10A 20ns 1ms Many of the sub- or supporting components (such as
ESD 15kV 30A <1ns 100ns electric motors or accessories) within appliances and
automobiles present transient threats to the entire system.
Table 1. Examples of transient sources and magnitude
Careful circuit design should not only factor environmental
scenarios but also the potential effects of these related
components. Table 2 below shows the vulnerability of
Characteristics of Transient Voltage Spikes various component technologies.
Transient voltage spikes generally exhibit a double Device Type Vulnerability (volts)
exponential wave, as shown below for lightning and ESD. VMOS 30-1800
MOSFET 100-200
Vp
GaAsFET 100-300
Vp/2
EPROM 100
JFET 140-7000
CMOS 250-3000
t1 t Schottky Diodes 300-2500
t2
Bipolar Transistors 380-7000
SCR 680-1000
Figure 1. Lightning Transient Waveform
Table 2: Range of device vulnerability.
100%
90%
Current (I) %
I30
I60
10%
30n
60n
tr = 0.7 to 1.0ns
Electrostatic discharge is characterized by very fast The switching of inductive loads generates high energy
rise times and very high peak voltages and currents. transients which increase in magnitude with increasingly
This energy is the result of an imbalance of positive and heavy loads. When the inductive load is switched off, the
negative charges between objects. collapsing magnetic eld is converted into electrical energy
which takes the form of a double exponential transient.
ESD that is generated by everyday activities can far surpass
Depending on the source, these transients can be as large
the vulnerability threshold of standard semiconductor
as hundreds of volts and hundreds of Amps, with duration
technologies. Following are a few examples:
times of 400 milliseconds.
t Walking across a carpet: Typical sources of inductive transients include:
35kV @ RH = 20%;1.5kV @ RH = 65%
t Walking across a vinyl oor: tGenerator tMotor
12kV @ RH = 20%;250V @ RH = 65% tRelay tTransformer
t Worker at a bench:
6kV @ RH = 20%;100V @ RH = 65% These examples are common in electrical and electronic
systems. Because the sizes of the loads vary according
t Vinyl envelopes:
to the application, the wave shape, duration, peak current
7kV @ RH = 20%;600V @ RH = 65%
and peak voltage are all variables which exist in real world
t Poly bag picked up from desk: transients. Once these variables can be approximated, a
20kV @ RH = 20%;1.2kV @ RH = 65% suitable suppressor technology can be selected.
The diagram at right V T
shows a transient T1
which is the result of
Lightning Induced Transients stored energy within
90%
induced by lightning are not the result of a direct strike. automobile charging
system. 10%
When a lightning strike occurs, the event creates a
magnetic eld which can induce transients of large A similar transient VB VS = 25V to 125V T1 = 5ms to 10ms
t
In a cloud-to-ground
strike (as shown at
right) the transient-
PERCENT OF PEAK VALUE
100
generating effect is far
90
greater.
SMAJ Series
Description
The SMAJ series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t3P)4DPNQMJBOU t5ZQJDBM*R less than 1A
t'PSTVSGBDFNPVOUFE above 12V
applications to optimize t)JHIUFNQFSBUVSF
board space soldering: 260C/40
t-PXQSPmMFQBDLBHF seconds at terminals
Agency Approvals t#VJMUJOTUSBJOSFMJFG t5ZQJDBMNBYJNVN
t(MBTTQBTTJWBUFEKVODUJPO temperature coefcient
AGENCY AGENCY FILE NUMBER delta VBR = 0.1% x VBR
t-PXJOEVDUBODF
@ 25C
E230531 t&YDFMMFOUDMBNQJOH
t1MBTUJDQBDLBHFIBT
capability
Underwriters Laboratory
t81FBL1VMTFQPXFS Flammability 94V-O
Maximum Ratings and Thermal Characteristics capability at 10 x 1000s
t.BUUF5JO-FBEoGSFF
waveform, repetition rate
(TA=25OC unless otherwise noted) Plated
(duty cycle): 0.01%
Parameter Symbol Value Unit t'BTUSFTQPOTFUJNF
typically less than 1.0ps
Peak Pulse Power Dissipation at
TA=25C by 10x1000s waveform PPPM 400 W from 0 Volts to VBR min
(Fig.1)(Note 1), (Note 2)
Power Dissipation on innite heat
PM(AV) 3.3 W
sink at TA=50OC Applications
Peak Forward Surge Current, 8.3ms TVS devices are ideal for the protection of I/O Interfaces,
IFSM 40 A
Single Half Sine Wave (Note 3)
VCC bus and other vulnerable circuits used in Telecom,
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional VF 3.5V/6.5 V
Computer, Industrial and Consumer electronic applications.
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 30 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 120 C/W
to Ambient
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25C per Fig. 2.
2. Mounted on 5.0x5.0mm copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only.
4. VF < 3.5V for VBR <
_ 200V and VF< 6.5V for VBR >
_ 201V.
Electrical Characteristics
For parts without A (VBR is 10% and VC is 5% higher than with A parts).
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
10 100
80
Derating in Percentage %
60
1
40
20
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA-Ambient temperature (C)
150
tr=10sec TJ=25C
10000
IPPM- Peak Pulse Current, % IRSM
( )
IPPM IPPM
2
100
Figure 5 - Steady State Power Dissipation Derating Figure 6 - Maximum Non-Repetitive Forward Surge
Curve Current Uni-Directional Only
45
1.2
PM(AV), Steady State Power Dissipation (W)
40
1
35
0.8 30
25
(A)
0.6
20
0.4 15
10
0.2
5
0 0
1 10 100
0 25 50 75 100 125 150 175
TA - Ambient Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Weight 0.002 ounce, 0.061 gram Temperature Cycle MIL-STD-883F, Method 1010.8
Polarity Color band denotes cathode except Bipolar High Temp. Storage JESD 22-A103C
Dimensions
DO-214AC (SMA)
Inches Millimeters
Cathode Band
Dimensions
Min Max Min Max
A 0.049 0.065 1.250 1.650
A C
B 0.157 0.177 3.990 4.500
C 0.100 0.110 2.540 2.790
B D 0.078 0.090 1.980 2.290
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
P4SMA Series
Description
The P4SMA series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
Agency Approvals t #VJMUJOTUSBJOSFMJFG above 12V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
AGENCY AGENCY FILE NUMBER
temperature coefcient soldering guaranteed:
E230531 VBR = 0.1% VBR@25C 260C/40 seconds at
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
t 8QFBLQVMTFQPXFS Underwriters Laboratory
Maximum Ratings and Thermal Characteristics Flammability 94V-O
capability at 101000s
(TA=25OC unless otherwise noted) t .BUUF5JO-FBEoGSFF
waveform, repetition rate
(duty cycles):0.01% Plated
Parameter Symbol Value Unit
t 'BTUSFTQPOTFUJNF
Peak Pulse Power Dissipation at
TA=25C by 10x1000s waveform PPPM 400 W typically less than 1.0ps
(Fig.1)(Note 1), (Note 2) from 0V to BV min
Power Dissipation on innite heat
PM(AV) 3.3 W
sink at TA=50OC
Applications
Peak Forward Surge Current, 8.3ms
IFSM 40 A TVS devices are ideal for the protection of I/O Interfaces,
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward VCC bus and other vulnerable circuits used in Telecom,
Voltage at 25A for Unidirectional VF 3.5V/6.5 V Computer, Industrial and Consumer electronic applications.
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 30 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 120 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2 .
2. Mounted on 0.2x0.2 (5.0 x 5.0mm) copper pad to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<6.5V for VBR >
_ 201V.
Electrical Characteristics
10 100
80
Derating in Percentage %
60
1
40
20
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA-Ambient temperature (C)
150 10000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Dissipation Derating Curve Figure 6 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
1.2
PM(AV), Steady State Power Dissipation
45
IFSM - Peak Forward Surge Current (A)
1 40
35
0.8
30
(W)
0.6 25
0.4 20
15
0.2
10
0 5
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
DO-214AC (SMA)
Inches Millimeters
Cathode Band
Dimensions
Min Max Min Max
A 0.049 0.065 1.250 1.650
A C
B 0.157 0.177 3.990 4.500
C 0.100 0.110 2.540 2.790
B D 0.078 0.090 1.980 2.290
Cathode Band
P4SMA XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
SACB Series
Description
Features
Electrical Characteristics
Maximum Inverse
Minimum Maximum Maximum Peak Maximum Working Blocking Peak Inverse
Stand-Off
Breakdown Reverse Clamping Pulse Junction Inverse Leakage
Part Marking Voltage Blocking UL
Voltage at Leakage Voltage at Current Capacitance Blocking Current at Voltage V
Number Code (Note1) VR IPP=5.0A Recognition
IT =1.0MA at VR IR per (Fig.3) at Voltage VWIB@ IIB
PIB
(V) (V)
VBR(V) (A) VC(V) IPP(A) 0 Volts (pF) VWIB(V) (mA)
SACB5.0 SKE 5.0 7.60 300 10.0 44.0 45 75 1.0 100 X
SACB6.0 SKG 6.0 7.90 300 11.2 41.0 45 75 1.0 100 X
SACB7.0 SKM 7.0 8.33 300 12.6 38.0 45 75 1.0 100 X
SACB8.0 SKR 8.0 8.89 100 13.4 36.0 45 75 1.0 100 X
SACB8.5 SKT 8.5 9.44 50 14.0 34.0 45 75 1.0 100 X
SACB10 SKX 10.0 11.10 5 16.3 29.0 45 75 1.0 100 X
SACB12 SLE 12.0 13.30 5 19.0 25.0 45 75 1.0 100 X
SACB15 SLM 15.0 16.70 5 23.6 20.0 45 75 1.0 100 X
SACB18 SLT 18.0 20.00 5 28.8 15.0 45 75 1.0 100 X
SACB22 SLX 22.0 24.40 5 35.4 14.0 45 75 1.0 100 X
SACB26 SME 26.0 28.90 5 42.3 11.1 45 75 1.0 100 X
SACB30 SMK 30.0 33.30 5 48.6 10.0 45 75 1.0 100 X
SACB36 SMP 36.0 40.00 5 60.0 8.6 45 75 1.0 100 X
SACB45 SMV 45.0 50.00 5 77.0 6.8 45 150 1.0 200 X
SACB50 SMZ 50.0 55.50 5 88.0 5.8 45 150 1.0 200 X
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100
100
Average Power
Percentage of Rated Power (%)
IPPM - Peak Pulse Power (kW)
30
Non-repetitive Pulse 75
Waveform shown in Fig. 3
T A =25C
10
Peak Power
50 (Single Pulse)
Impulse
Exponential
P PK ".5" Decay
1 td
P PK td Half Sine 25
td=7tp
P PK Square
td
Current Waveforms 0
0.1
0.1s 1.0s 10s 100s 1.0ms 10ms 0 25 50 75 100 125 150
t d - Pulse Width (sec.) TL - Lead Temperature (C)
150
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Half Value
( )
IPPM IPPM
2
50 10/1000sec. Waveform
as dened by R.E.A
Low Capacitance
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Average ramp up rate (Liquidus Temp Ts(min)
Ramp-down
3C/second max
(TL) to peak ts
Preheat
Dimensions
F
E G
Cathode Band
SACB XX
XXX
Series Type Stand Off Voltage
F
Littelfuse Logo
Product Type
Packaging
Component Packaging
Part number Quantity Packaging Specication
Package Option
Schematic
Transient
Voltage
Suppressor
Diode
SMBJ Series
Description
The SMBJ series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
t #VJMUJOTUSBJOSFMJFG above 12V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
Agency Approvals temperature coefcient soldering guaranteed:
VBR =0.1% VBR@25C 260C/40 seconds at
AGENCY AGENCY FILE NUMBER terminals
t (MBTTQBTTJWBUFEDIJQ
E128662/E230531 junction t 1MBTUJDQBDLBHFIBT
t 8QFBLQVMTFQPXFS Underwriters Laboratory
capability at 101000s Flammability 94V-O
waveform, repetition rate t .BUUF5JO-FBEoGSFF
Maximum Ratings and Thermal Characteristics
(duty cycles):0.01% Plated
(TA=25OC unless otherwise noted)
t 'BTUSFTQPOTFUJNF
Parameter Symbol Value Unit typically less than 1.0ps
from 0V to BV min
Peak Pulse Power Dissipation at
TA=25C by 10x1000s waveform PPPM 600 W
(Fig.1)(Note 1), (Note 2)
Applications
Power Dissipation on innite heat
PM(AV) 5.0 W
sink at TA=50OC TVS devices are ideal for the protection of I/O Interfaces,
Peak Forward Surge Current, 8.3ms VCC bus and other vulnerable circuits used in Telecom,
IFSM 100 A Computer, Industrial and Consumer electronic applications.
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional VF 3.5V/5.0 V
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 20 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 100 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2 (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
Electrical Characteristics
100 100
Derating in Percentage %
10
60
40
1
20
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA - Ambient Temperature (C)
150 10000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Dissipation Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6
120
PM(AV), Steady State Power Dissipation
5
100
4
80
(W)
3
60
2
40
1
20
0
0
0 25 50 75 100 125 150 175
1 10 100
TA - Ambient Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
Cathode Band
SMBJ XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
P6SMB Series
Description
The P6SMB series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
t #VJMUJOTUSBJOSFMJFG above 12V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
Agency Approvals temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
AGENCY AGENCY FILE NUMBER
t (MBTTQBTTJWBUFEDIJQ terminals
E230531 junction t 1MBTUJDQBDLBHFIBT
t 8QFBLQVMTFQPXFS Underwriters Laboratory
capability at 101000s Flammability 94V-O
Maximum Ratings and Thermal Characteristics waveform, repetition rate t .BUUF5JO-FBEoGSFF
(duty cycles):0.01% Plated
(TA=25OC unless otherwise noted)
t 'BTUSFTQPOTFUJNF
Parameter Symbol Value Unit typically less than 1.0ps
from 0V to BV min
Peak Pulse Power Dissipation at
TA=25C by 10x1000s waveform PPPM 600 W
(Fig.1)(Note 1), (Note 2)
Applications
Power Dissipation on innite heat
PM(AV) 5.0 W
sink at TA=50OC TVS devices are ideal for the protection of I/O Interfaces,
Peak Forward Surge Current, 8.3ms VCC bus and other vulnerable circuits used in Telecom,
IFSM 100 A
Single Half Sine Wave (Note 3) Computer, Industrial and Consumer electronic applications.
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional VF 3.5V/5.0 V
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 20 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 100 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2 (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
Electrical Characteristics
100 100
Derating in Percentage %
75
10
50
25
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA - Ambient Temperature (C)
150 10000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Dissipation Derating Figure 6 - Maximum Non-Repetitive Peak Forward
Curve Surge Current Uni-Directional Only
6 120
PM(AV), Steady State Power Dissipation (W)
5 100
4 80
3 60
2 40
1 20
0 0
0 25 50 75 100 125 150 175 1 10 100
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
Cathode Band
P6SMB XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
1KSMB Series
Description
The 1KSMB series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU t 5ZQJDBM*R less than 1A
t 'PSTVSGBDFNPVOUFE above 12V
applications to optimize t )JHI5FNQFSBUVSF
board space soldering guaranteed:
t -PXQSPmMFQBDLBHF 260C/40 seconds at
t #VJMUJOTUSBJOSFMJFG terminals
t 5ZQJDBMNBYJNVN t 1MBTUJDQBDLBHFIBT
temperature coefcient Underwriters Laboratory
Agency Approvals Flammability 94V-O
VBR = 0.1% VBR@25C
t (MBTTQBTTJWBUFEDIJQ t .BUUF5JO-FBEoGSFF
AGENCY AGENCY FILE NUMBER Plated
junction
E128662 t 8QFBLQVMTFQPXFS t "WBJMBCMFJOCSFBLEPXO
capability at 101000s Voltage from 6.8V
waveform, repetition rate to 160V specially
(duty cycles):0.01% designed for automotive
Maximum Ratings and Thermal Characteristics applications
(TA=25OC unless otherwise noted) t 'BTUSFTQPOTFUJNF
typically less than 1.0ps t 0GGFST)JHI4VSHFSBUJOH
from 0V to BV min in compact package:
Parameter Symbol Value Unit bridges the gap between
Peak Pulse Power Dissipation at t &YDFMMFOUDMBNQJOH
600W and 1.5KW
TA=25C by 10x1000s waveform PPPM 1000 W capability
(Fig.1)(Note 1), (Note 2) t -PXJODSFNFOUBMTVSHF
Power Dissipation on innite heat resistance
PM(AV) 5.0 W
sink at TA=50OC
Peak Forward Surge Current, 8.3ms
IFSM 100 A
Single Half Sine Wave (Note 3) Applications
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional VF 3.5V/5.0 V TVS devices are ideal for the protection of I/O Interfaces,
only (Note 4) VCC bus and other vulnerable circuits used in Telecom,
Operating Junction and Storage Computer, Industrial and Consumer electronic applications.
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 20 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 100 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2 (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 50V and VF<5.0V for VBR >
_ 51V.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
Derating in Percentage %
60
10
40
20
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA-Ambient temperature (C)
150 10000
tr=10sec TJ=25C Bi-directional V=0V
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Dissipation Derating Figure 6 - Maximum Non-Repetitive Peak Forward
Curve Surge Current Uni-Directional Only
6 120
PM(AV), Steady State Power Dissipation
5 100
4 80
(W)
(A)
3 60
2 40
1 20
0 0
0 25 50 75 100 125 150 175 1 10 100
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
SMCJ Series
Description
The SMCJ series is designed specically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
Agency Approvals t #VJMUJOTUSBJOSFMJFG above 12V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
AGENCY AGENCY FILE NUMBER temperature coefcient soldering guaranteed:
VBR = 0.1%V BR @25C 260C/40 seconds at
E230531
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTFQPXFS Underwriters Laboratory
capability at 101000s Flammability 94V-O
(TA=25OC unless otherwise noted)
waveform, repetition rate t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit (duty cycles):0.01% Plated
Peak Pulse Power Dissipation at t 'BTUSFTQPOTFUJNF
TA=25C by 10x1000s waveform PPPM 1500 W typically less than 1.0ps
(Fig.1)(Note 1), (Note 2) from 0V to BV min
Power Dissipation on innite heat
PM(AV) 6.5 W
sink at TA=50OC
Applications
Peak Forward Surge Current, 8.3ms
IFSM 200 A
Single Half Sine Wave (Note 3) TVS devices are ideal for the protection of I/O Interfaces,
Maximum Instantaneous Forward VCC bus and other vulnerable circuits used in Telecom,
Voltage at 100A for Unidirectional VF 3.5/5.0 V Computer, Industrial and Consumer electronic applications.
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 15 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
__ 200V and VF<5.0V for VBR >
_ 201V.
Electrical Characteristics
100 200
100
10
150 100000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Half Value
( )
IPPM IPPM
2 100
50 10/1000sec. Waveform Bi-directional @VR
as dened by R.E.A
10 Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1
0 1.0 10.0 100.0 1000.0
0 1.0 2.0 3.0 4.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Dissipation Derating Figure 6 - Maximum Non-Repetitive Peak Forward
Curve Surge Current Uni-Directional Only
6.5 200
IFSM - Peak Forward Surge Current (A)
PM(AV), Steady Sate Power Dissipation
6 180
5.5
160
5
4.5 140
4 120
3.5
(W)
100
3
2.5 80
2 60
1.5 40
1
20
0.5
0 0
0 25 50 75 100 125 150 175 1 10 100
TA - Ambient Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
1.5SMC Series
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
Agency Approvals t #VJMUJOTUSBJOSFMJFG above 13V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
AGENCY AGENCY FILE NUMBER temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
E230531
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTFQPXFS Underwriters Laboratory
(TA=25OC unless otherwise noted) capability at 101000s Flammability 94V-O
waveform, repetition rate t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit (duty cycles):0.01% Plated
Peak Pulse Power Dissipation at t 'BTUSFTQPOTFUJNF
TA=25C by 10x1000s waveform PPPM 1500 W typically less than 1.0ps
(Fig.1)(Note 1), (Note 2) from 0V to BV min
Power Dissipation on innite heat
PM(AV) 6.5 W
sink at TA=50OC
Applications
Peak Forward Surge Current, 8.3ms
IFSM 200 A
Single Half Sine Wave (Note 3) TVS devices are ideal for the protection of I/O Interfaces,
Maximum Instantaneous Forward VCC bus and other vulnerable circuits used in Telecom,
Voltage at 100A for Unidirectional VF 3.5/5.0 V Computer, Industrial and Consumer electronic applications.
only (Note 4)
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 15 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. VF<3.5V for VBR <
_ 200V and VF<5.0V for VBR >
_ 201V.
Electrical Characteristics
100 100
Derating in Percentage %
75
10 50
25
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
150 100000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Uni-directional @VR
Half Value
( )
IPPM IPPM
2 100
50 10/1000sec. Waveform
as dened by R.E.A Bi-directional @VR
10 Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1
0
0 1.0 2.0 3.0 4.0 1.0 10.0 100.0 1000.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Dissipation Derating Figure 6 - Maximum Non-Repetitive Peak Forward
Curve Surge Current Uni-Directional Only
6.5 200
IFSM - Peak Forward Surge Current (A)
6
180
5.5
PM(AV), Steady Sate Power
5 160
4.5 140
Dissipation (W)
4 120
3.5
100
3
2.5 80
2 60
1.5
40
1
0.5 20
0 0
0 25 50 75 100 125 150 175 1 10 100
TA - Ambient Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
SMDJ Series
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications in order to t -PXJODSFNFOUBMTVSHF
optimize board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 2A
Agency Approvals t #VJMUJOTUSBJOSFMJFG above 12V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
AGENCY AGENCY FILE NUMBER soldering guaranteed:
temperature coefcient
VBR = 0.1% VBR@25C 260C/40 seconds at
E230531
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
t 8QFBLQVMTFQPXFS Underwriters Laboratory
Maximum Ratings and Thermal Characteristics Flammability 94V-O
capability at 101000s
(TA=25OC unless otherwise noted) t .BUUF5JO-FBEoGSFF
waveform, repetition rate
(duty cycles):0.01% Plated
Parameter Symbol Value Unit
t 'BTUSFTQPOTFUJNF
Peak Pulse Power Dissipation at
typically less than 1.0ps
TA=25C by 10x1000s waveform PPPM 3000 W
(Fig.1)(Note 1), (Note 2) from 0V to BV min
Power Dissipation on innite heat
PM(AV) 6.5 W
sink at TA=50OC Applications
Peak Forward Surge Current, 8.3ms
IFSM 300 A TVS devices are ideal for the protection of I/O Interfaces,
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward VCC bus and other vulnerable circuits used in Telecom,
Voltage at 100A for Unidirectional VF 3.5 V Computer, Industrial and Consumer electronic applications.
only
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 15 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100
1000
100
Percentage %
60
10
40
1
20
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
0.1 0
0.0000001 0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
150 100000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
td
0 1
0 1.0 2.0 3.0 4.0 1.0 10.0 100.0 1000.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional only
6.5
350
6
IFSM - Peak Forward Surge Current
5.5 300
5
PM(AV), Steady Sate Power
4.5 250
Dissipation (W)
4
3.5 200
(A)
3
2.5 150
2
1.5 100
1
50
0.5
0
0 25 50 75 100 125 150 175 0
1 10 100
TA - Ambient Temperature(C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
I L 0.094 - 2.400 -
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
VOLTAGE
F
SERIES
Littelfuse Logo
Product Type
Packaging
5.0SMDJ Series
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications to optimize t -PXJODSFNFOUBMTVSHF
board space resistance
t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 5A
Agency Approvals t #VJMUJOTUSBJOSFMJFG above 22V
t 5ZQJDBMNBYJNVN t )JHI5FNQFSBUVSF
AGENCY AGENCY FILE NUMBER soldering guaranteed:
temperature coefcient
VBR = 0.1% VBR@25C 260C/40 seconds at
E230531
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
t 8QFBLQVMTFQPXFS Underwriters Laboratory
Maximum Ratings and Thermal Characteristics Flammability 94V-O
capability at 101000s
(TA=25OC unless otherwise noted) t .BUUF5JO-FBEoGSFF
waveform, repetition rate
(duty cycles):0.01% Plated
Parameter Symbol Value Unit
t 'BTUSFTQPOTFUJNF
Peak Pulse Power Dissipation at
typically less than 1.0ps
TA=25OC by 10x1000s waveform PPPM 5000 W
(Fig.1)(Note 1), (Note 2) from 0V to BV min
Power Dissipation on innite heat
PM(AV) 6.5 W
sink at TA=50OC Applications
Peak Forward Surge Current, 8.3ms
IFSM 300 A TVS devices are ideal for the protection of I/O Interfaces,
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward VCC bus and other vulnerable circuits used in Telecom,
Voltage at 100A for Unidirectional VF 5.0 V Computer, Industrial and Consumer electronic applications.
only
Operating Junction and Storage
TJ , TSTG -65 to 150 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 15 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
100
Percentage %
60
10
40
1
20
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
0.1 0
0.0000001 0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (Sec.) TA-Ambient temperature (C)
150 100000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
td
0 1
0 1.0 2.0 3.0 4.0 1.0 10.0 100.0 1000.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6.5 350
PM(AV), Steady State Power Dissipation (W)
6
5.5 300
5
4.5 250
4
3.5 200
3
150
2.5
2
100
1.5
1
50
0.5
0 0
0 25 50 75 100 125 150 175 1 10 100
TA-Ambient Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
XXXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES
Littelfuse Logo
Marking Code
Packaging
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in DO-41 soldering guaranteed:
Package 260C/40 seconds /
AGENCY AGENCY FILE NUMBER 0.375,(9.5mm) lead
P4KE Series
t 8QFBLQVMTF
capability at 101000s length, 5 lbs., (2.3kg)
E230531
waveform, repetition rate tension
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
t 'BTUSFTQPOTFUJNF Underwriters Laboratory
Maximum Ratings and Thermal Characteristics Flammability classication
typically less than 1.0ps
(TA=25OC unless otherwise noted) 94V-O
from 0 Volts to BV min
t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit
capability plated
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 400 W
(Note 1)
Applications
Steady State Power Dissipation on
PD 1.5 W
ininite heat sink at TL=75C (Fig. 5) TVS devices are ideal for the protection of I/O interfaces,
Peak Forward Surge Current, 8.3ms VCC bus and other vulnerable circuits used in telecom,
Single Half Sine Wave Unidirectional IFSM 40 A computer, industrial and consumer electronic applications.
only (Note 2)
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 60 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 100 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
100 100
Derating in Percentage, %
75
10
50
1
25
0.1 0
0.1s 1.0s 10s 100s 1.0ms 10ms 0 25 50 75 100 125 150 175 200
td - Pulse Width (sec.) TA- Ambient Temperature (C)
150 10000
tr=10sec TJ=25C Bi-directional VR=0V
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady Pulse Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
1.2
45
Steady Sate Power Dissipation (W)
1 40
IFSM - Peak Forward Surge Current
35
0.8
30
0.6 25
(A)
20
0.4 L = 0.375" (9.5mm)
Lead Lengths 15
0.2 10
5
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL-Lead Temperature(C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
Dimensions
D Min Max Min Max
A 1.000 - 25.40 -
C
B 0.160 0.205 4.10 5.20
P4KE xxx XX X
Cathode Band
P4KEXXX
OPTION CODE:
F
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
SERIES CODE
Littelfuse Logo
Product Type
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
RoHS SA Series
Description
Features
t 3P)4DPNQMJBOU resistance
t 5ZQJDBMNBYJNVN t 5ZQJDBM*R less than 1A
temperature coefcient above 13V
VBR = 0.1% VBR@25C t )JHIUFNQFSBUVSF
t (MBTTQBTTJWBUFEDIJQ soldering guaranteed:
Agency Approvals junction in DO-15 Package 260C/40 seconds /
t 8QFBLQVMTF 0.375,(9.5mm) lead
AGENCY AGENCY FILE NUMBER capability at 101000s length, 5 lbs., (2.3kg)
SA Series
waveform, repetition rate tension
E128662/E230531
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
t 'BTUSFTQPOTFUJNF Underwriters Laboratory
typically less than 1.0ps Flammability classication
Maximum Ratings and Thermal Characteristics 94V-O
from 0 Volts to BV min
(TA=25OC unless otherwise noted)
t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
capability plated
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by t -PXJODSFNFOUBMTVSHF
10x1000s test waveform (Fig.1) PPPM 500 W
(Note 1)
Applications
Steady State Power Dissipation on
PD 3.0 W
innite heat sink at TL=75C (Fig. 5) TVS devices are ideal for the protection of I/O interfaces,
Peak Forward Surge Current, 8.3ms VCC bus and other vulnerable circuits used in telecom,
Single Half Sine Wave Unidirectional IFSM 70 A computer, industrial and consumer electronic applications.
only (Note 2)
Maximum Instantaneous Forward
Voltage at 35A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 20 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
30 100
Non-repetitive Pulse
10
Derating in Percentage, %
75
Exponential 50
P Td
1
P Td
Half SINE
25
P Td Square
0.1
0
01.s 1.0s 10s 100s 1.0ms 10ms 0 25 50 75 100 125 150 175 200
td- Pulse Width (sec.) TA- Ambient Temperature (C)
150 10000
tr=10sec TJ=25C
Bi-directional V=0V
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Forward Surge
Current Uni-Directional Only
3.5
80
Steady State Power Dissipation (W)
3
IFSM - Peak Forward Surge Current
70
2.5 60
2 50
(A)
1.5 40
30
1 L = 0.375 (9.5mm)
Lead Lengths
20
0.5
10
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature(C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
Dimensions
D Min Max Min Max
A 1.000 - 25.40 -
C
B 0.230 0.300 5.80 7.60
SAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t )JHIUFNQFSBUVSF
t (MBTTQBTTJWBUFEDIJQ soldering guaranteed:
junction in DO-15 260C/40 seconds /
Package 0.375,(9.5mm) lead
t 8QFBLQVMTFQPXFS length, 5 lbs., (2.3kg)
Agency Approvals capability at 101000s tension
waveform, repetition rate t 1MBTUJDQBDLBHFIBT
AGENCY AGENCY FILE NUMBER (duty cycles):0.01% Underwriters Laboratory
SAC Series
t 'BTUSFTQPOTFUJNF Flammability classication
E230531 94V-O
typically less than 1.0ps
from 0 Volts to BV min t .BUUF5JO-FBEoGSFF
t &YDFMMFOUDMBNQJOH plated
Maximum Ratings and Thermal Characteristics capability t *EFBMGPSEBUBMJOF
(TA=25OC unless otherwise noted) applications
t -PXJODSFNFOUBMTVSHF
Parameter Symbol Value Unit
resistance
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 500 W Applications
(Note 1)
Steady State Power Dissipation on TVS devices are ideal for the protection of I/O interfaces,
PD 3.0 W
innite heat sink at TL=75C (Fig. 5) VCC bus and other vulnerable circuits used in telecom,
Operating Junction and Storage computer, industrial and consumer electronic applications.
TJ , TSTG -55 to 175 C
Temperature Range
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
Average Power
100 75
10 50 Peak Power
(Single Pulse)
1 25
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (Sec.) TL Lead Temperature (C)
150
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Half Value
( )
IPPM IPPM
2
50 10/1000sec. Waveform
as dened by R.E.A
Low Capacitance
3.5
Steady State Power dissipation (W)
2.5
1.5
0.5
0
0 25 50 75 100 125 150 175 200
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Average ramp up rate (Liquidus Temp Ts(min)
Ramp-down
3C/second max
(TL) to peak ts
Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.230 0.300 5.80 7.60
C 0.028 0.034 0.71 0.86
A B A
D 0.104 0.140 2.60 3.60
DO-204AC (DO-15)
SAC xxx X
Cathode Band
OPTION CODE:
BLANK Reel Tape
SACXX
F
-B Bulk Packaging
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
SERIES CODE
Littelfuse Logo
Product Type
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Schematic
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in DO-15 Package soldering guaranteed:
t 8QFBLQVMTF 260C/40 seconds /
AGENCY AGENCY FILE NUMBER capability at 101000s 0.375,(9.5mm) lead
P6KE Series
waveform, repetition rate length, 5 lbs., (2.3kg)
E128662/E230531
(duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
typically less than 1.0ps Underwriters Laboratory
Maximum Ratings and Thermal Characteristics from 0 Volts to BV min Flammability classication
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH 94V-O
capability t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit plated
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 600 W
(Note 1)
Applications
Steady State Power Dissipation on
PD 5.0 W
ininite heat sink at TL=75C (Fig. 5) TVS devices are ideal for the protection of I/O interfaces,
Peak Forward Surge Current, 8.3ms VCC bus and other vulnerable circuits used in telecom,
Single Half Sine Wave Unidirectional IFSM 100 A computer, industrial and consumer electronic applications.
only (Note 2)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 20 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF< 5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
100 100
TA=25C
Derating in Percentage, %
75
10
50
1
25
0.1 0
0.1s 1.0s 10s 100s 1.0ms 10ms 0 25 50 75 100 125 150 175 200
150 10000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
100 IPPM
Uni-directional @VR
Cj (pF)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Forward Surge
Current
6 120
Steady State Power Dissipation (W)
5 100
4 80
(A)
3 60
2 L = 0.375 (9.5mm) 40
Lead Lengths
1 20
0 0
0 25 50 75 100 125 150 175 200
1 10 100
TL-Lead Temperature(C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
Dimensions
D Min Max Min Max
A 1.000 - 25.40 -
C
B 0.230 0.300 5.80 7.60
P6KEXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in DO-201 soldering guaranteed:
Package 260C/40 seconds /
AGENCY AGENCY FILE NUMBER 0.375,(9.5mm) lead
1.5KE Series
t 8QFBLQVMTF
capability at 101000s length, 5 lbs., (2.3kg)
E128662/E230531
waveform, repetition rate tension
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
t 'BTUSFTQPOTFUJNF Underwriters Laboratory
Maximum Ratings and Thermal Characteristics typically less than 1.0ps Flammability classication
(TA=25OC unless otherwise noted) from 0 Volts to BV min 94V-O
t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit capability plated
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 1500 W
(Note 1) Applications
Steady State Power Dissipation on
ininite heat sink at TL=75C (Fig. 5)
PD 6.5 W TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional IFSM 200 A computer, industrial and consumer electronic applications.
only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 15 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
Maximum
Reverse Breakdown Voltage Maximum Maximum Agency
Part Part Test Clamping
Stand off VBR (Volts) @ IT Peak Pulse Reverse Approval
Number Number Current Voltage
Voltage VR Current Ipp Leakage IR @
(Uni) (Bi) IT (mA) VC @ Ipp
(Volts) (A) VR (A)
MIN MAX (Volts)
1.5KE6.8A 1.5KE6.8CA 5.80 6.45 7.14 10 10.5 144.8 1000 X
1.5KE7.5A 1.5KE7.5CA 6.40 7.13 7.88 10 11.3 134.5 500 X
1.5KE8.2A 1.5KE8.2CA 7.02 7.79 8.61 10 12.1 125.6 200 X
1.5KE9.1A 1.5KE9.1CA 7.78 8.65 9.50 1 13.4 113.4 50 X
1.5KE10A 1.5KE10CA 8.55 9.50 10.50 1 14.5 104.8 10 X
1.5KE11A 1.5KE11CA 9.40 10.50 11.60 1 15.6 97.4 5 X
1.5KE12A 1.5KE12CA 10.20 11.40 12.60 1 16.7 91.0 5 X
1.5KE13A 1.5KE13CA 11.10 12.40 13.70 1 18.2 83.5 1 X
1.5KE15A 1.5KE15CA 12.80 14.30 15.80 1 21.2 71.7 1 X
1.5KE16A 1.5KE16CA 13.60 15.20 16.80 1 22.5 67.6 1 X
1.5KE18A 1.5KE18CA 15.30 17.10 18.90 1 25.2 60.3 1 X
1.5KE20A 1.5KE20CA 17.10 19.00 21.00 1 27.7 54.9 1 X
1.5KE22A 1.5KE22CA 18.80 20.90 23.10 1 30.6 49.7 1 X
1.5KE24A 1.5KE24CA 20.50 22.80 25.20 1 33.2 45.8 1 X
1.5KE27A 1.5KE27CA 23.10 25.70 28.40 1 37.5 40.5 1 X
1.5KE30A 1.5KE30CA 25.60 28.50 31.50 1 41.4 36.7 1 X
1.5KE33A 1.5KE33CA 28.20 31.40 34.70 1 45.7 33.3 1 X
1.5KE36A 1.5KE36CA 30.80 34.20 37.80 1 49.9 30.5 1 X
1.5KE39A 1.5KE39CA 33.30 37.10 41.00 1 53.9 28.2 1 X
1.5KE43A 1.5KE43CA 36.80 40.90 45.20 1 59.3 25.6 1 X
1.5KE47A 1.5KE47CA 40.20 44.70 49.40 1 64.8 23.5 1 X
1.5KE51A 1.5KE51CA 43.60 48.50 53.60 1 70.1 21.7 1 X
1.5KE56A 1.5KE56CA 47.80 53.20 58.80 1 77.0 19.7 1 X
1.5KE62A 1.5KE62CA 53.00 58.90 65.10 1 85.0 17.9 1 X
1.5KE68A 1.5KE68CA 58.10 64.60 71.40 1 92.0 16.5 1 X
1.5KE75A 1.5KE75CA 64.10 71.30 78.80 1 103.0 14.8 1 X
1.5KE82A 1.5KE82CA 70.10 77.90 86.10 1 113.0 13.5 1 X
1.5KE91A 1.5KE91CA 77.80 86.50 95.50 1 125.0 12.2 1 X
1.5KE100A 1.5KE100CA 85.50 95.00 105.00 1 137.0 11.1 1 X
1.5KE110A 1.5KE110CA 94.00 105.00 116.00 1 152.0 10.0 1 X
1.5KE120A 1.5KE120CA 102.00 114.00 126.00 1 165.0 9.2 1 X
1.5KE130A 1.5KE130CA 111.00 124.00 137.00 1 179.0 8.5 1 X
1.5KE150A 1.5KE150CA 128.00 143.00 158.00 1 207.0 7.3 1 X
1.5KE160A 1.5KE160CA 136.00 152.00 168.00 1 219.0 6.9 1 X
1.5KE170A 1.5KE170CA 145.00 162.00 179.00 1 234.0 6.5 1 X
1.5KE180A 1.5KE180CA 154.00 171.00 189.00 1 246.0 6.2 1 X
1.5KE200A 1.5KE200CA 171.00 190.00 210.00 1 274.0 5.5 1 X
1.5KE220A 1.5KE220CA 185.00 209.00 231.00 1 328.0 4.6 1 X
1.5KE250A 1.5KE250CA 214.00 237.00 263.00 1 344.0 4.4 1 X
1.5KE300A 1.5KE300CA 256.00 285.00 315.00 1 414.0 3.7 1 X
1.5KE350A 1.5KE350CA 300.00 332.00 368.00 1 482.0 3.2 1 X
1.5KE400A 1.5KE400CA 342.00 380.00 420.00 1 548.0 2.8 1 X
1.5KE440A 1.5KE440CA 376.00 418.00 462.00 1 602.0 2.5 1 X
1.5KE480A 1.5KE480CA 408.00 456.00 504.00 1 658.0 2.3 1 X
1.5KE510A 1.5KE510CA 434.00 485.00 535.00 1 698.0 2.1 1 X
1.5KE530A 1.5KE530CA 477.00 503.50 556.50 1 725.0 2.1 1 X
1.5KE540A 1.5KE540CA 459.00 513.00 567.00 1 740.0 2.0 1 X
1.5KE550A 1.5KE550CA 495.00 522.50 577.50 1 760.0 2.0 1 X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A, the VBR is +10% and VC is 5% higher than with A parts.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
Derating in Percentage %
100 75
10 50
1 25
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
150 100000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Uni-directional @ VR
Half Value
( )
IPPM IPPM
2 100
Bi-directional @ VR
50 10/1000sec. Waveform
as dened by R.E.A
10 Tj=25C
f=1.0MHz
Vsig=50mVp-p
td 1
0 1.0 10.0 100.0 1000.0
0 1.0 2.0 3.0 4.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
6.5
6 200
Steady State Power Dissipation (W)
5.5 180
5
160
4.5
4 140
3.5 120
3 100
2.5
80
2 L = 0.375 (9.5mm)
1.5 Lead Lengths 60
1 40
0.5
20
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature(C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
Inches Millimeters
Dimensions
D Min Max Min Max
A 1.000 - 25.40 -
C
B 0.285 0.375 7.20 9.50
1.5KEXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t )JHIUFNQFSBUVSF
t (MBTTQBTTJWBUFEDIJQ soldering guaranteed:
junction in DO-201 260C/40 seconds /
Package 0.375,(9.5mm) lead
t 8QFBLQVMTFQPXFS length, 5 lbs., (2.3kg)
Agency Approvals capability at 101000s tension
waveform, repetition rate t 1MBTUJDQBDLBHFIBT
AGENCY AGENCY FILE NUMBER (duty cycles):0.01% Underwriters Laboratory
LCE Series
t 'BTUSFTQPOTFUJNF Flammability classication
E128662/E230531 94V-O
typically less than 1.0ps
from 0 Volts to BV min t .BUUF5JO-FBEoGSFF
t &YDFMMFOUDMBNQJOH plated
Maximum Ratings and Thermal Characteristics capability t *EFBMGPSEBUBMJOF
(TA=25OC unless otherwise noted) t -PXJODSFNFOUBMTVSHF applications
resistance
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 1500 W Applications
(Note 1)
TVS devices are ideal for the protection of I/O interfaces,
Steady State Power Dissipation on
innite heat sink at TL=75C (Fig. 5)
PD 6.5 W VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
Electrical Characteristics
1000 100
Average Power
100 75
10 50 Peak Power
(Single Pulse)
1 25
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
150
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
Half Value
( )
IPPM IPPM
2
50
+
10/1000sec. Waveform
Low Capacitance
as dened by R.E.A
TVC
td
Application Note: Device must be used
0 with two units in parrellel, opposite in polarity
0 1.0 2.0 3.0 4.0
as shown on circuit for AC signal lin
t-Time (ms) protection.
6.5
6
Steady State Power Dissipation (W)
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0 25 50 75 100 125 150 175 200
TL-Lead Temperature (C)
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.285 0.375 7.20 9.50
OPTION CODE:
XXX
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
VOLTAGE CODE
F
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Schematic
Description
Features
t 3P)4DPNQMJBOU resistance
t 5ZQJDBMNBYJNVN t 5ZQJDBM*R less than 2A
temperature coefcient above 12V
VBR = 0.1% VBR@25C t )JHIUFNQFSBUVSF
t (MBTTQBTTJWBUFEDIJQ soldering guaranteed:
Agency Approvals junction in P600 package 260C/40 seconds /
t 8QFBLQVMTF 0.375, (9.5mm) lead
AGENCY AGENCY FILE NUMBER capability at 101000s length, 5 lbs., (2.3kg)
3KP Series
waveform, repetition rate tension
E230531
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
t 'BTUSFTQPOTFUJNF Underwriters Laboratory
typically less than 1.0ps Flammability classication
Maximum Ratings and Thermal Characteristics from 0 Volts to BV min 94V-O
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
capability plated
Parameter Symbol Value Unit
t -PXJODSFNFOUBMTVSHF
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 3000 W Applications
(Note 1)
Steady State Power Dissipation on
TVS devices are ideal for the protection of I/O interfaces,
PD 7.0 W VCC bus and other vulnerable circuits used in telecom,
ininite heat sink at TL=75C (Fig. 5)
Peak Forward Surge Current, 8.3ms computer, industrial and consumer electronic applications.
Single Half Sine Wave Unidirectional IFSM 300 A
only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
80
100
60
10
40
1
20
0.1 0
0 25 50 75 100 125 150 175 200
0.000001 0.00001 0.0001 0.001
td-Pulse Width (Sec.) TA-Ambient temperature (C)
150 1000000
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
( )
IPPM IPPM
2
100
50 10/1000sec. Waveform Bi-directional @ VR
as dened by R.E.A
td 1
0
1.0 2.0 3.0 4.0 1.0 10.0 100.0 1000.0
0
VBR - Reverse Breakdown Voltage (V)
t-Time (ms)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
8
350
Steady State Power Dissipation (W)
7
IFSM Peak Forward Surge Current (A)
300
6
250
5
200
4
2 100
1 50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL-Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
D Inches Millimeters
Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
P600
3KPXXX
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
5KP Series
waveform, repetition rate t 1MBTUJDQBDLBHFIBT
E128662/E230531
(duty cycles):0.01% Underwriters Laboratory
t 'BTUSFTQPOTFUJNF Flammability classication
typically less than 1.0ps 94V-O
Maximum Ratings and Thermal Characteristics from 0 Volts to BV min t .BUUF5JO-FBEoGSFF
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH plated
capability
Parameter Symbol Value Unit
t -PXJODSFNFOUBMTVSHF
Peak Pulse Power Dissipation by resistance
10x1000s test waveform (Fig.1) PPPM 5000 W
(Note 1)
Steady State Power Dissipation on Applications
PD 8.0 W
ininite heat sink at TL=75C (Fig. 5)
TVS devices are ideal for the protection of I/O interfaces,
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional IFSM 400 A VCC bus and other vulnerable circuits used in telecom,
only (Note 2) computer, industrial and consumer electronic applications.
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional VF 3.5/5.0 V
only (Note 3)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
Non-repetitive pulse
waveform shown in
PPPM - Peak Pulse Power (kW)
Fig.3 TA=25C
50
1
25
0.1 0
0.1s 1.0s 10s 100s 1.0ms 10ms 0 25 50 75 100 125 150 175 200
150 100000
Bi-directional V=0V
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
1000
Cj (pF)
Half Value
( )
IPPM IPPM
2 100 Bi-directional @ VR
50 10/1000sec. Waveform
as dened by R.E.A
10 Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1
0 1.0 10.0 100.0 1000.0
0 1.0 2.0 3.0 4.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3
L = 0.375 (9.5mm) 150
2 Lead Lengths
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature(C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
5KPXXX
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 2A
VBR = 0.1% VBR@25C above 36V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in P600 package soldering guaranteed:
t 8QFBLQVMTF 260C/40 seconds /
AGENCY AGENCY FILE NUMBER capability at 101000s 0.375, (9.5mm) lead
waveform, repetition rate length, 5 lbs., (2.3kg)
E128662/E230531
(duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
typically less than 1.0ps Underwriters Laboratory
Maximum Ratings and Thermal Characteristics from 0 Volts to BV min Flammability classication
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH 94V-O
capability t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit plated
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 15000 W Applications
(Note 1)
Steady State Power Dissipation on
TVS devices are ideal for the protection of I/O interfaces,
PD 8.0 W VCC bus and other vulnerable circuits used in telecom,
ininite heat sink at TL=75C (Fig. 5)
15KPA Series
Peak Forward Surge Current, 8.3ms computer, industrial and consumer electronic applications.
Single Half Sine Wave Unidirectional IFSM 400 A
only (Note 2)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
Derating in Percentage %
80
100
60
40
10
20
1
0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td-Pulse Width (sec.) TA-Ambient temperature (C)
150
tr=10sec TJ=25C
IPPM- Peak Pulse Current, % IRSM
100 IPPM
Cj (pf)
Bi-directional @ VR
Half Value
( )
IPPM IPPM
2 100 Uni-directional @ VR
50 10/1000sec. Waveform
as dened by R.E.A
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1
0 0.0 50.0 100.0 150.0 200.0 250.0 300.0 350.0
0 1.0 2.0 3.0 4.0
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Forward Surge
Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3
L = 0.375 (9.5mm)
150
2 Lead Lengths
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL- Lead Temperature(C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
15KPAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
SERIES CODE
Littelfuse Logo
Product Type
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 2A
V. = 0.1% VBR@25C above 49V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in P600 package soldering guaranteed:
t 8QFBLQVMTF 260C/40 seconds /
AGENCY AGENCY FILE NUMBER capability at 101000s 0.375,(9.5mm) lead
waveform, repetition rate length, 5 lbs., (2.3kg)
E230531
(duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
typically less than 1.0ps Underwriters Laboratory
Maximum Ratings and Thermal Characteristics from 0 Volts to BV min Flammability classication
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH 94V-O
capability t .BUUF5JO-FBEoGSFF
Parameter Symbol Value Unit plated
Peak Pulse Power Dissipation by
10x1000s test waveform (Fig.1) PPPM 20000 W Applications
(Note 1)
Steady State Power Dissipation on
TVS devices are ideal for the protection of I/O interfaces,
PD 8.0 W VCC bus and other vulnerable circuits used in telecom,
ininite heat sink at TL=75C (Fig. 5)
20KPA Series
Peak Forward Surge Current, 8.3ms computer, industrial and consumer electronic applications.
Single Half Sine Wave Unidirectional IFSM 400 A
only (Note 2)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Electrical Characteristics
Ratings and Characteristic Curves (T =25C unless otherwise notedFigure 1 - Peak Pulse Power Rating Curve A
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
80
100
Derating in Percentage %
60
10
40
1
20
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td- Pulse Width (Sec.) TA-Ambient temperature (C)
150
tr=10sec TJ=25C
Bi-directional V= OV
IPPM- Peak Pulse Current, % IRSM
Half Value
( )
IPPM IPPM
2 100 Bi-directional @ VR
50 10/1000sec. Waveform
as dened by R.E.A
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td 1
0 0 50 100 150 200 250 300 350
0 1.0 2.0 3.0 4.0
VBR - Reverse Breakdwon Voltage (V)
t-Time (ms)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3 L = 0.375 (9.5mm)
Lead Lengths 150
2
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL- Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
C 0.048 0.052 1.22 1.32
A B A
D 0.340 0.360 8.60 9.10
P600
20KPAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 2A
VBR = 0.1% VBR@25C above 73V
t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
Agency Approvals junction in P600 package soldering guaranteed:
t 8QFBLQVMTF 260C/40 seconds /
AGENCY AGENCY FILE NUMBER capability at 101000s 0.375,(9.5mm) lead
waveform, repetition rate length, 5 lbs., (2.3kg)
E230531 (duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
typically less than 1.0ps Underwriters Laboratory
from 0 Volts to BV min Flammability classication
Maximum Ratings and Thermal Characteristics 94V-O
(TA=25OC unless otherwise noted) t &YDFMMFOUDMBNQJOH
capability t .BUUF5JO-FBEoGSFF
plated
Parameter Symbol Value Unit
Peak Pulse Power Dissipation by Applications
10x1000s test waveform (Fig.1) PPPM 30000 W
(Note 1) TVS devices are ideal for the protection of I/O interfaces,
Steady State Power Dissipation on VCC bus and other vulnerable circuits used in telecom,
30KPA Series
PD 8.0 W
ininite heat sink at TL=75C (Fig. 5) computer, industrial and consumer electronic applications.
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional IFSM 400 A
only (Note 2)
Operating Junction and Storage
TJ , TSTG -55 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Electrical Characteristics
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000
100
Pppm-Peak Pulse Power (KW)
Derating in Percentage %
60
10
40
1
20
0.1
0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
TA-Ambient temperature (C)
td-Pulse Width (Sec.)
150
tr=10sec TJ=25C Bi-directional V= OV
IPPM- Peak Pulse Current, % IRSM
( )
IPPM IPPM
2 100 Bi-directional @ VR
50 10/1000sec. Waveform
as dened by R.E.A
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
1
0
0 1.0 2.0 3.0 4.0 0 50 100 150 200 250 300
t-Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3 L = 0.375 (9.5mm)
Lead Lengths 150
2
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL- Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
C 0.048 0.052 1.22 1.32
A B A
D 0.340 0.360 8.60 9.10
P600
30KPAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
AK6 Series
Note:
1. Rated IPP measured with 8 x 20S pulse.
Electrical Characteristics
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Physical Specications
120
100
Percent of Rated Value
80
60
40
20
0
0 25 50 75 100 125 150
AMBIENT TEMPERATURE (C)
Dimensions
Product Type
Note: UL mark does not appear on -058C & -076C.
Description
AK10 Series
Note:
1. Rated IPP measured with 8 x 20s pulse.
Electrical Characteristics
Standoff Max. Test Max. Clamping Voltage Max. Temp Max. Agency
Reverse Breakdown
Part Voltage Reserve Current VCL @ Peak Pulse Current Coefcient Capacitance Approval
Voltage (VBR) @ IT
Numbers (VSO) Leakage IT (IPP) (Note 1) of VBR 0 Bias 10kHz
Volts (IR) @VSO A
Min Volts Max Volts (mA) VCL Volts IPP Amps (%/OC) (nF)
AK10 - 058C 58 20 64 70 10 110 10,000 0.1 6.5 X
AK10 - 076C 76 20 85 95 10 140 10,000 0.1 6.5 X
AK10 - 170C 170 20 180 220 10 260 10,000 0.1 2.8 X
AK10 - 190C 190 20 200 245 10 290 10,000 0.1 2.5 X
AK10 - 240C 240 20 250 285 10 340 10,000 0.1 2.2 X
AK10 - 380C 380 20 401 443 10 520 10,000 0.1 2.0 X
AK10 - 430C 430 20 440 490 10 625 10,000 0.1 1.4 X
Note: Using 8 x 20S wave shaped dened in IEC 61000-4-5.
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Physical Specications
120
100
Percent of Rated Value
80
60
40
20
0
0 25 50 75 100 125 150
AMBIENT TEMPERATURE (C)
Dimensions
Product Type
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications in order to t -PXJODSFNFOUBMTVSHF
optimize board space resistance
Agency Approvals t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
t #VJMUJOTUSBJOSFMJFG above 13V
AGENCY AGENCY FILE NUMBER t 5ZQJDBMNBYJNVN t )JHIUFNQFSBUVSF
temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTF Underwriters Laboratory
(TA=25OC unless otherwise noted) capability at 101000s Flammability classication
waveform, repetition rate 94V-O
Parameter Symbol Value Unit (duty cycles):0.01% t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by t 'BTUSFTQPOTFUJNF plated
10x1000s test waveform (Fig.1) PPPM 400 W
(Note 1), (Note 2)
typically less than 1.0ps
from 0 Volts to BV min
Steady State Power Dissipation on
PM(AV) 1 W
ininite heat sink at TA=50C
Peak Forward Surge Current, 8.3ms Applications
IFSM 40 A
Single Half Sine Wave (Note 3)
Designed to protect sensitive electronics which operate
Maximum Instantaneous Forward within an automotive system, such as:
VF 3.5 V
Voltage at 25A for Unidirectional only
Operating Junction and Storage - Sound Systems
TJ , TSTG -65 to 175 C
Temperature Range
- Satellite Navigation
Typical Thermal Resistance Junction - Climate Control
RuJT 30 C/W
to Terminal
- Engine Management
Typical Thermal Resistance Junction
RuJA 120 C/W - Stability Control
to Ambient
Notes: - ABS, Etc.
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2 (5X5mm) per Fig. 5.
3. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
10 100
60
1
40
20
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
0.1
0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td-Pulse Width (sec.) TA Ambient temperature (C)
150
Standard Waveform 10/1000sec 10000
As defined by R.E.A.
Format is usually tr / td
IPPM- Peak Pulse Current, % IRSM
Bi-directional V=0V
tr
Peak Value IPPM Tj=25oC 1000 Uni-directional V=0V
100 Pulse Width (td) is
defined as the point
where the peak current Uni-directional @ VR
Cj (pF)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
1.2
45
PM(AV), Steady State Power Dissipation
1 40
35
0.8
30
(A)
(W)
0.6 25
20
0.4
15
0.2 10
5
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TA - Ambiant Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
DO-214AC (SMA)
Inches Millimeters
Cathode Band
Dimensions
Min Max Min Max
A 0.049 0.065 1.250 1.650
A C
B 0.157 0.177 3.990 4.500
C 0.100 0.110 2.540 2.790
B D 0.078 0.090 1.980 2.290
Cathode Band
4TPSMA XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications in order to t -PXJODSFNFOUBMTVSHF
optimize board space resistance
Agency Approvals t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
t #VJMUJOTUSBJOSFMJFG above 13V
AGENCY AGENCY FILE NUMBER t 5ZQJDBMNBYJNVN t )JHIUFNQFSBUVSF
temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTF Underwriters Laboratory
(TA=25OC unless otherwise noted) capability at 101000s Flammability classication
waveform, repetition rate 94V-O
Parameter Symbol Value Unit (duty cycles):0.01% t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by t 'BTUSFTQPOTFUJNF plated
10x1000s test waveform (Fig.1) PPPM 600 W
(Note 1), (Note 2)
typically less than 1.0ps
from 0 Volts to BV min
Steady State Power Dissipation on
PM(AV) 5.0 W
ininite heat sink at TA=50C
Peak Forward Surge Current, 8.3ms Applications
IFSM 75 A
Single Half Sine Wave (Note 3)
Designed to protect sensitive electronics which operate
Maximum Instantaneous Forward within an automotive system, such as:
VF 3.5 V
Voltage at 50A for Unidirectional only
Operating Junction and Storage - Sound Systems
TJ , TSTG -65 to 175 C
Temperature Range
- Satellite Navigation
Typical Thermal Resistance Junction - Climate Control
RuJT 20 C/W
to Terminal
- Engine Management
Typical Thermal Resistance Junction
RuJA 100 C/W - Stability Control
to Ambient
Notes: - ABS, Etc.
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2 (5X5mm) per Fig. 5.
3. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
10 70
60
50
40
1
30
20
0.2x0.2" (5.0x5.0mm)
10
Copper Pad Area
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
150 10000
Standard Waveform 10/1000sec
As defined by R.E.A.
IPPM- Peak Pulse Current, % IRSM
Bi-directional V=0V
Format is usually tr / td
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6 120
PM(AV), Steady State Power Disipation (W)
5 100
4 80
3 60
2
40
1
20
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TA - Ambient Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
Cathode Band
6TPSMB XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
Description
Features
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
70
60
10 50
40
30
20
0.2x0.2" (5.0x5.0mm)
10
Copper Pad Area
1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
150 10000
Standard Waveform 10/1000sec Bi-directional V=0V
As defined by R.E.A.
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6
PM(AV), Steady State Power Dissipation
120
IFSM - Peak Forward Surge Current (A)
5
100
4
80
(W)
3
60
2
40
1
20
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TA - Ambient Temperature (C)
NUmber of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
Cathode Band
10TPSMB XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications in order to t -PXJODSFNFOUBMTVSHF
optimize board space resistance
Agency Approvals t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 1A
t #VJMUJOTUSBJOSFMJFG above 12V
AGENCY AGENCY FILE NUMBER t 5ZQJDBMNBYJNVN t )JHIUFNQFSBUVSF
temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTF Underwriters Laboratory
(TA=25OC unless otherwise noted) capability at 101000s Flammability classication
waveform, repetition rate 94V-O
Parameter Symbol Value Unit (duty cycles):0.01% t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by t 'BTUSFTQPOTFUJNF plated
10x1000s test waveform (Fig.1) PPPM 1500 W
(Note 1), (Note 2)
typically less than 1.0ps
from 0 Volts to BV min
Steady State Power Dissipation on
PM(AV) 6.5 W
ininite heat sink at TA=50C
Peak Forward Surge Current, 8.3ms Applications
IFSM 200 A
Single Half Sine Wave (Note 3)
Designed to protect sensitive electronics which operate
Maximum Instantaneous Forward within an automotive system, such as:
VF 3.5 V
Voltage at 50A for Unidirectional only
Operating Junction and Storage - Sound Systems
TJ , TSTG -65 to 175 C
Temperature Range
- Satellite Navigation
Typical Thermal Resistance Junction - Climate Control
RuJT 15 C/W
to Terminal
- Engine Management
Typical Thermal Resistance Junction
RuJA 75 C/W - Stability Control
to Ambient
Notes: - ABS, Etc.
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.32x0.32 (8X8mm) per Fig. 5.
3. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
Derating in Percentage %
60
10
40
20
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175
td-Pulse Width (sec.) TA-Ambient temperature (oC)
150 100000
Standard Waveform 10/1000sec
As defined by R.E.A. Bi-directional V=0V
Format is usually tr / td
10000
IPPM - Peak Pulse Current, % IRSM
tr Uni-directional V=0V
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6.5
PM(AV), Steady State Power Dissipation (W)
200
6
IFSM - Peak Forward Surge Current
5.5 180
5 160
4.5
140
4
3.5 120
(A)
3 100
2.5 80
2
60
1.5
1 40
0.5 20
0
0
0 25 50 75 100 125 150 175 200 1 10 100
TA-Ambient Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
DO-214AB (SMC J-Bend)
Inches Millimeters
Cathode Band Dimensions
Min Max Min Max
A 0.114 0.126 2.900 3.200
A C
B 0.260 0.280 6.600 7.110
C 0.220 0.245 5.590 6.220
B
D 0.079 0.103 2.060 2.620
H E 0.030 0.060 0.760 1.520
D F - 0.008 - 0.203
G 0.305 0.320 7.750 8.130
F
E H 0.006 0.012 0.152 0.305
G
I 0.129 - 3.300 -
J K L J 0.094 - 2.400 -
K - 0.165 - 4.200
I L 0.094 - 2.400 -
Cathode Band
15TPSMC XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
Description
Features
t 3P)4DPNQMJBOU t &YDFMMFOUDMBNQJOH
t 'PSTVSGBDFNPVOUFE capability
applications in order to t -PXJODSFNFOUBMTVSHF
optimize board space resistance
Agency Approvals t -PXQSPmMFQBDLBHF t 5ZQJDBM*R less than 2A
t #VJMUJOTUSBJOSFMJFG above 12V
AGENCY AGENCY FILE NUMBER t 5ZQJDBMNBYJNVN t )JHIUFNQFSBUVSF
temperature coefcient soldering guaranteed:
VBR = 0.1% VBR@25C 260C/40 seconds at
t (MBTTQBTTJWBUFEDIJQ terminals
junction t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 8QFBLQVMTF Underwriters Laboratory
(TA=25OC unless otherwise noted) capability at 101000s Flammability classication
waveform, repetition rate 94V-O
Parameter Symbol Value Unit (duty cycles):0.01% t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by t 'BTUSFTQPOTFUJNF plated
10x1000s test waveform (Fig.1) PPPM 3000 W
(Note 1), (Note 2)
typically less than 1.0ps
from 0 Volts to BV min
Steady State Power Dissipation on
PM(AV) 6.5 W
ininite heat sink at TA=50C
Peak Forward Surge Current, 8.3ms Applications
IFSM 300 A
Single Half Sine Wave (Note 3)
Designed to protect sensitive electronics which operate
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional VF 3.5 V within an automotive system, such as:
only
- Sound Systems
Operating Junction and Storage
TJ , TSTG -65 to 175 C
Temperature Range - Satellite Navigation
Typical Thermal Resistance Junction - Climate Control
RuJT 15 C/W
to Terminal - Engine Management
Typical Thermal Resistance Junction - Stability Control
RuJA 75 C/W
to Ambient
- ABS, Etc.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.32x0.32 (5X5mm) per Fig. 5.
3. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
90
P PPM- Peak Pulse Power (kW)
80
Percentage %
60
10 50
40
30
1
20
0.31x0.31" (8.0x8.0mm)
10
Copper Pad Area
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
o
td-Pulse Width (Sec.) TA-Ambient Temperature( C)
150 1000000
Standard Waveform 10/1000sec
As defined by R.E.A. Format is
IPPM- Peak Pulse Current, % IRSM
td 1
0
0 10 20 30 40 50 60 70 80 1.0 10.0 100.0 1000.0
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6.5
350
6
IFSM - Peak Forward Surge Current
5.5 300
PM (AV), Steady State Power
5
4.5 250
Dissipation (W)
4
3.5 200
(A)
3
2.5 150
2
1.5 100
1
0.5 50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TA-Ambient Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
- Time (min to max) (ts) oTFDT Ts(max)
Dimensions
DO-214AB (SMC J-Bend)
Inches Millimeters
Cathode Band
Dimensions
Min Max Min Max
A 0.114 0.126 2.900 3.200
A C
B 0.260 0.280 6.600 7.110
C 0.220 0.245 5.590 6.220
B D 0.079 0.103 2.060 2.620
Cathode Band
30TPSMC XXX C A
XXX
5% VOLTAGE TOLERANCE
BI-DIRECTIONAL
F
VOLTAGE
SERIES Littelfuse Logo
Marking Code
Packaging
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
Agency Approvals t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
junction in DO-41 soldering guaranteed:
AGENCY AGENCY FILE NUMBER
package 260C/40 seconds /
t 8QFBLQVMTF 0.375,(9.5mm) lead
capability at 101000s length, 51bs., (2.3kg)
waveform, repetition rate tension
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 'BTUSFTQPOTFUJNF Underwriters Laboratory
(TA=25OC unless otherwise noted) typically less than 1.0ps Flammability classication
from 0 Volts to BV min 94V-O
Parameter Symbol Value Unit t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by capability plated
10x1000s test waveform (Fig.1) PPPM 400 W
(Note 1)
Steady State Power Dissipation on
PM(AV) 1.5 W Applications
ininite heat sink at TL=75C (Fig. 5)
Peak Forward Surge Current, 8.3ms Designed to protect sensitive electronics which operate
IFSM 40 A
Single Half Sine Wave (Note 2) within an automotive system, such as:
Maximum Instantaneous Forward
VF 3.5 V - Sound Systems
Voltage at 25A for Unidirectional only
Operating Junction and Storage
- Satellite Navigation
TJ , TSTG -65 to 175 C
Temperature Range - Climate Control
Typical Thermal Resistance Junction - Engine Management
RuJL 60 C/W
to Lead
- Stability Control
Typical Thermal Resistance Junction - ABS, Etc.
RuJA 100 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.160 0.205 4.10 5.20
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
10 100
80
Derating in Percentage %
60
1
40
20
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td-Pulse Width (sec.) TA-Ambient temperature (C)
150 10000
Standard Waveform 10/1000sec
Bi-directional VR=0V
As defined by R.E.A.
IPPM- Peak Pulse Current, % IRSM
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
1.2
45
Steady Sate Power Dissipation (W)
1 40
35
0.8
30
0.6 25
L = 0.375 (9.5mm)
Lead Lengths 20
0.4
15
0.2 10
5
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL- Lead Temperature (C)
Number of Cycles at 60 Hz
P4KAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
Agency Approvals t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
junction in DO-15 Package soldering guaranteed:
AGENCY AGENCY FILE NUMBER t 8QFBLQVMTF 260C/40 seconds /
capability at 101000s 0.375,(9.5mm) lead
waveform, repetition rate length, 51bs., (2.3kg)
(duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics typically less than 1.0ps Underwriters Laboratory
(TA=25OC unless otherwise noted) from 0 Volts to BV min Flammability classication
t &YDFMMFOUDMBNQJOH 94V-O
Parameter Symbol Value Unit capability t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by plated
10x1000s test waveform (Fig.1) PPPM 600 W
(Note 1)
Steady State Power Dissipation on Applications
PM(AV) 5.0 W
ininite heat sink at TL=75C (Fig. 5)
Peak Forward Surge Current, 8.3ms
Designed to protect sensitive electronics which operate
IFSM 75 A within an automotive system, such as:
Single Half Sine Wave (Note 2)
Maximum Instantaneous Forward - Sound Systems
VF 3.5 V
Voltage at 25A for Unidirectional only
- Satellite Navigation
Operating Junction and Storage
TJ , TSTG -65 to 175 C - Climate Control
Temperature Range
Typical Thermal Resistance Junction - Engine Management
RuJL 20 C/W
to Lead - Stability Control
Typical Thermal Resistance Junction
RuJA 75 C/W
- ABS, Etc.
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
80
Derating in Percentage %
100
60
10
40
1
20
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td-Pluse Width(Sec.) TA-Ambient temperature (C)
150 10000
Standard Waveform 10/1000sec
As defined by R.E.A. Format is Bi-directional V= OV
IPPM- Peak Pulse Current, % IRSM
usually tr/td
tr Uni-directional V= OV
1000
Peak Value IPPM Tj=25C Pulse
100 Width (td) is defined Uni-directional @ VR
as the point where
Cj (pF)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6 120
Steady State Power Dissipation (W)
5 100
4 80
3 60
2 40
L = 0.375 (9.5mm)
Lead Lengths
1 20
0 0
0 25 50 75 100 125 150 175 200 1 10 100
TL- Lead Temperature (C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.230 0.300 5.80 7.60
P6KAXXX
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Toleran
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics tabl
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 1A
VBR = 0.1% VBR@25C above 13V
Agency Approvals t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
junction in DO-201 soldering guaranteed:
AGENCY AGENCY FILE NUMBER Package 260C/40 seconds /
t 8QFBLQVMTF 0.375,(9.5mm) lead
capability at 101000s length, 51bs., (2.3kg)
waveform, repetition rate tension
(duty cycles):0.01% t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics t 'BTUSFTQPOTFUJNF Underwriters Laboratory
(TA=25OC unless otherwise noted) typically less than 1.0ps Flammability classication
from 0 Volts to BV min 94V-O
Parameter Symbol Value Unit t &YDFMMFOUDMBNQJOH t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by capability plated
10x1000s test waveform (Fig.1) PPPM 1500 W
(Note 1)
Steady State Power Dissipation on Applications
PM(AV) 6.5 W
ininite heat sink at TL=75C (Fig. 5)
Designed to protect sensitive electronics which operate
Peak Forward Surge Current, 8.3ms within an automotive system, such as:
IFSM 200 A
Single Half Sine Wave (Note 2)
Maximum Instantaneous Forward - Sound Systems
Voltage at 100A for Unidirectional VF 3.5 V
only - Satellite Navigation
Operating Junction and Storage - Climate Control
TJ , TSTG -65 to 175 C
Temperature Range - Engine Management
Typical Thermal Resistance Junction - Stability Control
RuJL 15 C/W
to Lead
- ABS, Etc.
Typical Thermal Resistance Junction
RuJA 75 C/W
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
Derating in Percentage %
80
100
60
10
40
1
20
0.1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
td-Pluse Width(Sec.) TA-Ambient temperatu ( o C)
100000
150
Standard Waveform 10/1000sec
As defined by R.E.A.
Bi-directional V=0V
IPPM- Peak Pulse Current, % IRSM
Format is usually t r / t d
10000
tr
Uni-directional V=0V
Peak Value IPPM
100 o
Tj =25 C 1000 Uni-Directional @VR
Cj (pF)
Pulse Width (t d) is
defined as the point
where the peak current
decays to 50% of IPPM
100
Half Value IPPM /2 Bi-Directional @VR
50
10 Tj=25C
f=1.0MHz
td Vsig=50mVp-p
0 1
0 1 2 3 4 1.0 10.0 100.0 1000.0
t - Time (ms)
VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current for Uni-Directional Only
6.5
200
Steady State Power Dissipation (W)
6
5.5 180
IFSM - Peak Forward Surge Current
5 160
4.5
140
4
3.5 120
(A)
3 100
2.5
80
2
1.5 L = 0.375 (9.5mm) 60
Lead Lengths
1 40
0.5
20
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL- Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Average ramp up rate (Liquidus Temp Ramp-down
3C/second max Ts(min)
(TL) to peak ts
Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.285 0.375 7.20 9.50
1.5KAXXX
BLANK Reel Tape
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
1000 100
100
60
10
40
1
20
0.1 0
0 25 50 75 100 125 150 175 200
0.000001 0.00001 0.0001 0.001
TA-Ambient temperature (oC)
td-Pulse Width (Sec.)
150 1000000
Standard Waveform 10/1000sec
As defined by R.E.A.
IPPM- Peak Pulse Current, % IRSM
Format is usually tr / td
Bi-directional V=0V
tr
td
0 1
00 10 120 30 240 50 3
60 70 480 1.0 10.0 100.0 1000.0
t - Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
8
350
Steady State Power Dissipation (W)
7
IFSM Peak Forward Surge Current
300
6
250
5
200
4
(A)
L = 0.375 (9.5mm)
3 Lead Lengths 150
2 100
1 50
0
0
0 25 50 75 100 125 150 175 200
1 10 100
TL-Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Average ramp up rate (Liquidus Temp Ramp-down
3C/second max Ts(min)
(TL) to peak ts
Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
3KAXXX
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t 5ZQJDBM*R less than 2A
VBR = 0.1% VBR@25C above 12V
Agency Approvals t (MBTTQBTTJWBUFEDIJQ t )JHIUFNQFSBUVSF
junction in P600 package soldering guaranteed:
AGENCY AGENCY FILE NUMBER t 8QFBLQVMTF 260C/40 seconds /
capability at 101000s 0.375,(9.5mm) lead
waveform, repetition rate length, 51bs., (2.3kg)
(duty cycles):0.01% tension
t 'BTUSFTQPOTFUJNF t 1MBTUJDQBDLBHFIBT
Maximum Ratings and Thermal Characteristics typically less than 1.0ps Underwriters Laboratory
(TA=25OC unless otherwise noted) from 0 Volts to BV min Flammability classication
t &YDFMMFOUDMBNQJOH 94V-O
Parameter Symbol Value Unit capability t .BUUF5JO-FBEoGSFF
Peak Pulse Power Dissipation by plated
10x1000s test waveform (Fig.1) PPPM 5000 W
(Note 1) Applications
Steady State Power Dissipation on
ininite heat sink at TL=75C (Fig. 5)
PM(AV) 8.0 W Designed to protect sensitive electronics from:
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
Derating in Percentage %
60
10
40
20
1 0
0.000001 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 200
150 100000
Standard Waveform 10/1000sec Bi-directional V=0V
As defined by R.E.A.
IPPM- Peak Pulse Current, % IRSM
Format is usually tr / td
tr 10000 Uni-directional V=0V
100 Bi-directional @ VR
Half Value IPPM/2
50
10 Tj=25C
f=1.0MHz
td Vsig=50mVp-p
0 1
0 1 2 3 4 1.0 10.0 100.0 1000.0
t - Time (ms) VBR - Reverse Breakdown Voltage (V)
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3 L = 0.375 (9.5mm)
Lead Lengths 150
2
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature (C)
Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
5KAXXX
F
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t )JHIUFNQFSBUVSF
VBR = 0.1% VBR@25C soldering guaranteed:
Agency Approvals t (MBTTQBTTJWBUFEDIJQ 260C/40 seconds /
junction in P600 package 0.375,(9.5mm) lead
AGENCY AGENCY FILE NUMBER t 8QFBLQVMTF length, 5 lbs., (2.3kg)
capability at 100s tension
E230531 t 1MBTUJDQBDLBHFIBT
150ms waveform,
repetition rate Underwriters Laboratory
(duty cycles): 0.01% Flammability classication
Maximum Ratings and Thermal Characteristics t 'BTUSFTQPOTFUJNF 94V-O
(TA=25OC unless otherwise noted) typically less than 1.0ps t .BUUF5JO-FBEoGSFF
from 0 Volts to BV min plated
Parameter Symbol Value Unit t &YDFMMFOUDMBNQJOH
Peak Pulse Power Dissipation capability
2200 W
1. 100s x 150ms test waveform PPPM
2. 8 x 20s test waveform 50000 W Applications
Steady State Power Dissipation on
PM(AV) 8.0 W
Designed to protect sensitive electronics from:
ininite heat sink at TL=75C (Fig. 5)
Maximum Instantaneous Forward - Inductive Load Switching
Voltage at 100A for Unidirectional VF 3.5 V - Alternator Load Dump
only
Operating Junction and Storage
TJ , TSTG -65 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
SLD Series
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
Derating In Percentage%
60
10
40
20
1 0
0.00001 0.0001 0.001 0.01 0.1 1 0 25 50 75 100 125 150 175 200
150 100000
Bi-directional V=0V
IPPM- Peak Pulse Current, % IRSM
10000 Uni-directional V=0V
'
'
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3 L = 0.375 (9.5mm)
Lead Lengths 150
2
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature(C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
SLDXXX
F
-B Bulk Packaging
TYPE CODE:
U-017 Uni-Directional
-018 Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Description
Features
t 3P)4DPNQMJBOU t -PXJODSFNFOUBMTVSHF
t 5ZQJDBMNBYJNVN resistance
temperature coefcient t )JHIUFNQFSBUVSF
VBR = 0.1% VBR@25C soldering guaranteed:
Agency Approvals t (MBTTQBTTJWBUFEDIJQ 260C/40 seconds /
junction in P600 package 0.375,(9.5mm) lead
AGENCY AGENCY FILE NUMBER t 8QFBLQVMTF length, 5 lbs., (2.3kg)
capability at 100s tension
E230531 t 1MBTUJDQBDLBHFIBT
150ms waveform,
repetition rate Underwriters Laboratory
(duty cycles): 0.01% Flammability classication
Maximum Ratings and Thermal Characteristics t 'BTUSFTQPOTFUJNF 94V-O
(TA=25OC unless otherwise noted) typically less than 1.0ps t .BUUF5JO-FBEoGSFF
from 0 Volts to BV min plated
Parameter Symbol Value Unit t &YDFMMFOUDMBNQJOH
Peak Pulse Power Dissipation capability
2200 W
1. 100s x 150ms test waveform PPPM
2. 8 x 20s test waveform 50000 W Applications
Steady State Power Dissipation on
PM(AV) 8.0 W
Designed to protect sensitive electronics from:
ininite heat sink at TL=75C (Fig. 5)
Maximum Instantaneous Forward - Inductive Load Switching
Voltage at 100A for Unidirectional VF 3.5 V - Alternator Load Dump
only
Operating Junction and Storage
TJ , TSTG -65 to 175 C
Temperature Range
Typical Thermal Resistance Junction
RuJL 8.0 C/W
to Lead
Typical Thermal Resistance Junction
RuJA 40 C/W
to Ambient
SLD Series
Electrical Characteristics (T =25C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
100 100
80
Derating In Percentage%
60
10
40
20
1 0
0.00001 0.0001 0.001 0.01 0.1 1 0 25 50 75 100 125 150 175 200
150 100000
Bi-directional V=0V
IPPM- Peak Pulse Current, % IRSM
10000 Uni-directional V=0V
'
'
Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current
9
450
Steady State Power Dissipation (W)
8
IFSM, Peak Forward Surge Current (A)
400
7
350
6
300
5
250
4
200
3 L = 0.375 (9.5mm)
Lead Lengths 150
2
100
1
50
0
0 25 50 75 100 125 150 175 200 0
1 10 100
TL - Lead Temperature(C) Number of Cycles at 60 Hz
Soldering Parameters
Temperature (T)
Ts(max)
- Time (min to max) (ts) oTFDT
Ramp-down
Average ramp up rate (Liquidus Temp Ts(min)
3C/second max ts
(TL) to peak Preheat
Dimensions
Inches Millimeters
D Dimensions
Min Max Min Max
C A 1.000 - 25.40 -
B 0.340 0.360 8.60 9.10
SLDXXX
F
-B Bulk Packaging
TYPE CODE:
U-017 Uni-Directional
-018 Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Packaging
Component Packaging
Part Number Quantity Packaging Specication
Package Option
Littelfuse offers several technologies to protect sensitive electronic circuits from excess
current resulting from overloads, short circuits, power cross or ground faults. Our overcurrent
protection product line includes:
Fuses Littelfuse offers the worlds broadest range of fuse types and ratings, including
cartridge, leaded, surface mount and thin lm designs
Littelfuse offers multiple technologies for overvoltage suppression and switching to protect sensitive electronic
circuits from excessive voltage resulting from electrostatic discharge (ESD), load switching or lightning strikes.
Our overvoltage protection product line includes:
Varistors Littelfuse offers surface mount Multi-Layer Varistors (MLVs) and industrial
Metal Oxide Varistors (MOVs) to protect against transients
SPAs Silicon Protection Arrays designed for analog and digital signal line protection
Specications descriptions and illustrative material in this literature are as accurate as known at the time of publication, FORM NO. EC111
but are subject to changes without notice. Visit www.littelfuse.com for the most up-to-date technical information. Revision Code: EC2111v1E0804