You are on page 1of 4

Smart-Vue 2.

0 Client Software Curriculum

Course Introduction
1. Purpose. The Smart-Vue 2.0 Client Software Service Training course is an online e-learning
training course. The course is available to all applicable Thermo Fisher Scientific (TFS), Unity
Lab Services (ULS) service representatives, and authorized distributors. The course is only
administered online and can be used for new certification.

2. Scope. The course is designed to provide general knowledge about the Smart-Vue 2.0 Client
Software. The course introduces the basics regarding installation and setup, modules, alert
configurations and sensor details. The total time needed to complete all eighteen modules is
approx 3.0 hours.

3. Applicability. This course is intended for instructional training purposes only. This course is
designed for all field service engineers and technical support representatives who are tasked
with duties involving all aspects of servicing and or supporting Smart-Vue 2.0 Client Software.

4. Recommendations. Comments and recommendations on the contents of the course are


welcome and will aide in subsequent course revisions. Please complete the course evaluation
questionnaire upon completing the entire course.

Course Overview and Training Expectations


The Smart-Vue 2.0 Client Software Service Training e-Learning course is composed of eighteen
separate study lessons. Each study lesson is to be completed in sequence to permit course
progression. Each lesson is a prerequisite to the next and must be fulfilled before progressing. A
curriculum overview for each training event is provided below with access instructions. Each
study lesson is self paced, however, the course enrollment period is limited to a 30 day
completion criteria timeframe. If youre unable to complete the course within the next thirty days
please inform your manager, company liaison, or the training administrator identified below.

Upon completing each lesson a (temporary), unsigned certificate will be emailed to you. This
certificate will only acknowledge you completed the module and are pending certification. Upon
completing all ten modules email the training administrator, at
LED.TMC.Training@thermofisher.com. The training administrator will verify your course
enrollment time and make sure your overall course grades meets the minimum 70% pass
criteria. Upon meeting the criteria, a signed course certificate will be issued to your attention.

If at any time you experience issues accessing the online tutorials, supporting documentation, or
have questions pertaining to the course instructions please email the training administrator
using the email address provided above.

Please note before beginning: All lessons are password authenticated and case sensitive. The
password used for all eighteen lessons is: svu2 Each e-learning training module requires you
to login with your First/Last Name and company business email address to record your training
activity, slides viewed, and course progress.

1
Step 1; Module 1, (click on hyper link) or browse to;
https://www.brainshark.com/thermofisher/vu?pi=zItzZSljpzJNmez0

Study lesson one is approx 9 minutes in length.

Step 2; Module 2, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zICzJwENtzJNmez0

Study lesson two is approx 7 minutes in length.

Step 3; Module 3, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zIBzgDUtSzJNmez0

Study lesson three is approx 8 minutes in length.

Step 4; Module 4, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zJGzadijqzJNmez0

Study lesson four is approx 15 minutes in length.

Step 5; Module 5, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zJ7zxvOabzJNmez0

Study lesson five is approx 5 minutes in length.

Step 6; Module 6, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHFz1ABBNJzJNmez0

Study lesson six is approx 11 minutes in length.

Step 7; Module 7, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zJXzyRbwvzJNmez0

Study lesson seven is approx 20 minutes in length.

Step 8; Module 8, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHkzNMjp8zJNmez0

Study lesson eight is approx 9 minutes in length.

Step 9; Module 9, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zGmzL3NRSzJNmez0

Study lesson nine is approx 13 minutes in length.

Step 10; Module 10, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zIKzbeqESzJNmez0

2
Study lesson ten is approx 2 minutes in length.

Step 11; Module 11, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHhzpZAQNzJNmez0

Study lesson eleven is approx 12 minutes in length.

Step 12; Module 12, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHFzb1oS9zJNmez0

Study lesson twelve is approx 9 minutes in length.

Step 13; Module 13, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zI4z5wfjDzJNmez0

Study lesson thirteen is approx 10 minutes in length.

Step 14; Module 14, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zIGzaf4ihzJNmez0

Study lesson fourteen is approx 10 minutes in length.

Step 15; Module 15, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHxzpLMlEzJNmez0

Study lesson fifteen is approx 13 minutes in length.

Step 16; Module 16, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zHhz11Q9IuzJNmez0

Study lesson sixteen is approx 3 minutes in length.

Step 17; Module 17, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zGXz3Va3FzJNmez0

Study lesson seventeen is approx 2 minutes in length.

Step 18; Module 18, (click on hyper link) or browse to;


https://www.brainshark.com/thermofisher/vu?pi=zI6zlR5ghzJNmez0

Study lesson eighteen is approx 1 minute in length.

Step 13, Course Certification

1. Upon successful completion of all course requirements; modules 1-10 please


email the Training Administrator at LED.TMC.Training@thermofisher.com.

3
2. Once the administrator receives your notification of course completion and verifies all
requirements have been met a certificate will be provided. Please allow a 5-7 business
days to receive confirmation of course completion.

You might also like