Professional Documents
Culture Documents
Project proposal
Y C B 5 6 4 4
Enrolment number:
Field: ELECTRICAL
Address: RISE SCHOOL OF ENGINEERING, 12-ALI BLOCK, NEW GARDEN TOWN, LAHORE,
PAKISTAN
Name and address of location of work where the project will be carried out:
RISE SCHOOL OF ENGINEERING, 12-ALI BLOCK, NEW GARDEN TOWN LAHORE, PAKISTAN.
Agreement of supervisor:
Signature of supervisor:
Date: 22-01-2016
PROJECT PROPOSAL
A. Introduction
In todays world ROBOTICS is a fast growing and interesting field. ROBOT has sufficient
intelligence to cover the maximum area of provided space. It has an infrared sensor which is
used to sense the obstacles coming in between the path of ROBOT. It will move in a particular
direction and avoid the obstacle which is coming in its path.
B. Objective:
The main motto of designing such type of Robot or the technology is that this technology can
be used in todays very fast transportation or in our industries to avoid the accident generally
happen. If we use this technology in the car or any vehicle, it will automatically sense the
obstacles then it will take a side to the available free space. An obstacle may be a living
things or any object. These Intelligent Robots are robots that can perform desired tasks in
unstructured environments without continuous human guidance. Thus by using this
technology in vehicles we make the drive safe. It measures the distance from the obstacle and display on
the LCD, as well show the total distance on the LCD, and different LEDs indicate the distance level.
C. Methodology
1. Mechanical design
This includes the hardware design of the robot that is motor &wheel placement, body
setup. Robot uses two Robotics gear motor & wheel for the movement.
2. Circuit design
Circuit design mainly consists of two parts:
a) Sensor part
b) Control board part (Micro Controller.
D. Resources Available
Our college lab is equipped with all necessary instruments and tools used for my project. All other modules
such as serial communication module, GSM/GPRS/3G module, Arduino board, microcontroller, current and Potential
transformers are easily available in our local market.
Signature of candidate:
Date: 22-03-2016
Level 6 Graduate Diploma in Engineering 9210-139 Assessment
Enrolment no:
Y C B 5 6 4 4
I certify that
1. I am solely responsible for the compilation of the proposal submitted under this form.
2. I have read and understood the examination rules and the 'Procedure and guidance notes and agree to
abide by them.
Signature of candidate:
Date: 22-03-2016
Section C Counter certification by a Chartered Engineer
I certify that the statements made in Section B are correct with regard to the above named candidate.
Signature:
Date: 22-03-2016
Professional Membership:
Category: CHARTERED ENGINEER
Number: 38204226
Institution: IET
Signature:
Date: 22-03-2016
4.1 Suitable engineering problem selected to solve and agreed with supervisor. [S]
4.2 Clear Introduction towards the objective [S]
4.3 Well defined objective identified [S]
4.4 Sound scientific methodology planned [S]
4.5 Adequate resources available [S]
4.6 Proper working environment with suitable supervision identified [S]
Signature:
Date: 22-03-2016