Professional Documents
Culture Documents
HOT FORMED
METRIC SIZE
INFORMATIVE REFERENCE
STANDARD SECTIONAL SECTION CENTER MODULUS
DIMENSIONS AREA GEOMETRICAL MOMENT OF RADIUS OF GYRATION
UNIT OF OF
INERTIA OF AREA
WEIGHT GRAVITY SECTION
ix =
HxB t r1 r2 A Cx = Cy Ix = Iy Max Iu Min Iv Max iu Min iv Zx = Zy
iy
mm x mm mm mm mm cm2 kg/m cm cm4 cm4 cm4 cm cm cm cm3
25 x 25 3 4 2 1.427 1.12 0.719 0.797 1.26 0.332 0.747 0.94 0.48 0.448
30 x 30 3 4 2 1.727 1.36 0.844 1.42 2.26 0.59 0.908 1.14 0.58 0.661
40 x 40 3 4.5 2 2.336 1.83 1.09 3.53 5.6 1.46 1.23 1.55 0.79 1.21
40 x 40 4 4.5 2 2.336 1.83 1.09 3.53 5.6 1.46 1.23 1.55 0.79 1.21
40 x 40 5 4.5 3 3.755 2.95 1.17 5.42 8.59 2.25 1.2 1.51 0.77 1.91
45 x 45 5 6.5 3 4.302 3.38 1.28 6.5 10.3 2.7 1.36 1.71 0.87 2
45 x 45 4 6.5 3 3.492 2.74 1.24 7.91 12.5 3.29 1.36 1.72 0.88 2.46
50 x 50 4 6.5 3 3.892 3.06 1.41 9.06 14.4 3.76 1.52 1.91 0.98 2.49
50 x 50 5 6.5 3 4.802 3.77 1.37 11.1 17.5 4.58 1.53 1.92 0.98 3.08
50 x 50 6 6.5 4.5 5.644 4.43 1.44 12.6 20 5.23 1.5 1.88 0.96 3.55
60 x 60 4 6.5 3 4.692 3.68 1.61 16 25.4 6.62 1.85 2.33 1.19 3.66
60 x 60 5 6.5 3 5.802 4.55 1.66 19.6 31.2 8.09 1.84 2.32 1.18 4.52
60 x 60 6 8 4 6.910 5.40 1.7 22.79 36.16 9.42 1.82 2.29 1.17 5.28
65 x 65 5 8.5 3 6.367 5.00 1.77 25.3 40.1 10.5 1.99 2.51 1.28 5.35
65 x 65 6 8.5 4 7.527 5.91 2.69 125 199 51.7 2.68 3.38 1.73 19.5
65 x 65 8 8.5 6 9.761 7.66 2.57 129 205 53.2 2.71 3.42 1.74 21.1
70 x 70 6 8.5 4 8.127 6.38 1.81 29.4 46.6 12.2 1.98 2.49 1.27 6.26
75 x 75 6 8.5 4 8.727 6.85 2.18 80.7 128 33.4 2.46 3.1 1.58 14.2
75 x 75 9 8.5 6 12.690 9.96 2.42 81.9 129 34.5 2.77 3.48 1.78 15.7
75 x 75 12 8.5 6 16.560 13.00 2.46 93 148 38.3 2.76 3.48 1.77 17.7
80 x 80 6 8.5 4 9.230 7.32 1.88 36.8 58.3 15.3 1.94 2.44 1.25 7.33
90 x 90 6 10 5 10.550 8.28 1.93 37.1 58.9 15.3 2.14 2.69 1.37 7.96
90 x 90 7 10 5 12.220 9.59 2.06 46.1 73.2 19 2.3 2.9 1.48 8.47
90 x 90 10 10 7 17.000 13.30 2.17 56.4 89.6 23.2 2.25 2.84 1.45 9.7
90 x 90 13 10 7 21.710 17.00 2.29 64.4 102 26.7 2.22 2.79 1.44 12.3
100 x 100 7 10 5 13.620 10.70 2.71 156 248 65.3 3.08 3.88 1.98 24.4
100 x 100 13 10 7 24.310 19.10 2.94 175 278 72 3 3.78 1.94 24.8
*100 x
10 10 7 19.000 14.90 2.82 220 348 91.1 3.04 3.83 1.95 29.5
100
120 x 120 8 12 5 18.760 14.70 3.24 258 410 106 3.71 4.67 2.38 31.1
*120 x
11 13 6.5 25.370 19.90 3.3 340 541 140 3.66 4.62 2.35 38.7
120
*120 x
12 13 6.5 27.540 21.60 3.4 366 583 150 3.65 4.6 2.35 39.36
120
*130 x
9 12 6 22.740 17.90 3.53 367 583 151 4.01 5.06 2.57 41.6
130
INFORMATIVE REFERENCE
STANDARD SECTIONAL SECTION CENTER MODULUS
DIMENSIONS AREA GEOMETRICAL MOMEN OF RADIUS OF GIRATION
UNIT OF OF
INERTIA OF AREA
WEIGHT GRAVITY SECTION
ix =
HxB t r1 r2 A Cx = Cy Ix = Iy Max Iu Min Iv Max iu Min iv Zx = Zy
iy
mm x mm mm mm mm cm2 kg/m cm cm4 cm4 cm4 cm cm cm cm3
130 x 130 15 12 8.5 36.750 28.80 3.76 467 743 192 3.93 4.95 2.53 42.68
*130 x
12 12 8.5 29.760 23.40 3.64 568 902 234 3.96 5 2.54 49.9
130
*150 x
10 14 7 29.000 23.00 4.14 740 1,180.00 304 4.61 5.82 2.96 68.1
150
*150 x
12 14 7 34.770 27.30 4.24 888 1,410.00 365 4.56 5.75 2.92 82.6
150
150 x 150 19 14 10 53.380 41.90 4.4 1,090.00 1,730.00 451 4.52 5.69 2.91 91.8
175 x 175 12 15 11 40.520 31.80 4.73 1,170.00 1,860.00 480 5.38 6.78 3.44 103
175 x 175 15 15 11 50.210 39.40 4.85 1,440.00 2,290.00 589 5.35 6.75 3.48 114
*200 x
15 17 12 57.750 45.30 5.46 2,180.00 3,470.00 891 6.14 7.75 3.93 150
200
*200 x
20 17 12 76.000 59.70 5.67 2,820.00 4,490.00 1,160.00 6.09 7.68 3.9 197
200
200 x 200 25 17 12 93.750 73.60 5.86 3,420.00 5,420.00 1,410.00 6.04 7.61 3.88 242
250 x 250 35 24 18 162.600 128.00 7.45 6,950.00 11,000.00 2,860.00 7.49 9.42 4.83 388
250 x 250 25 24 12 119.4 119400 93.70 9,110.00 14,400.00 3,790.00 7.63 9.62 4.89 519
SPECIFICATION
ACCORDING JIS G 3192 METRIC SIZE
25 or order + 1.5
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
125 x 125 125 x 125 6.5 9 10 30.31 23.80 847 293.0 5.29 3.11 136.0 47.0
150 x 75 150 x 75 5 7 8 17.85 14.00 666 49.5 6.11 1.66 88.8 13.2
150 x 100 148 x 100 6 9 11 26.84 21.10 1 020 151.0 6.17 2.37 138.0 30.1
150 x 150 150 x 150 7 10 11 40.14 31.50 1 640 563.0 6.39 3.75 219.0 75.1
175 x 175 175 x 175 7.5 11 12 51.21 40.20 2 880 984.0 7.50 4.38 330.0 112.0
198 x 99 4.5 7 11 23.18 18.20 1 580 114.0 8.26 2.21 160.0 23.0
200 x 100
200 x 100 5.5 8 11 27.16 21.30 1 840 134.0 8.24 2.22 184.0 26.8
200 x 200 200 x 200 8 12 13 63.53 49.90 4 720 1 600 8.62 5.02 472.0 160.0
248 x 124 5 8 12 32.68 25.70 3 540 255.0 10.40 2.79 285.0 41.1
250 x 125
250 x 125 6 9 12 37.66 29.60 4 050 294.0 10.40 2.79 324.0 47.0
250 x 250 250 x 250 9 14 16 92.18 72.40 10 800 3 650 10.80 6.29 867.0 292.0
298 x 149 5.5 8 13 40.80 32.00 6 320 442.0 12.40 3.29 424.0 59.3
300 x 150
300 x 150 6.5 9 13 46.78 36.70 7 210 508.0 12.40 3.29 481.0 67.7
300 x 300 300 x 300 10 15 18 119.80 94.00 20 400 6 750 13.10 7.51 1 360 450.0
346 x 174 6 9 14 52.68 41.40 11 100 792.0 14.50 3.88 641.0 91.0
350 x 175
350 x 175 7 11 14 63.14 49.60 13 600 984.0 14.70 3.95 775.0 112.0
350 x 350 350 x 350 12 19 20 173.90 137.00 40 300 13 600 15.20 8.84 2 300 776.0
396 x 199 7 11 16 72.16 56.60 20 000 1 450 16.70 4.48 1 010 145.0
400 x 200
400 x 200 8 13 16 84.10 66.00 23 700 1 740 16.8 4.54 1 190 174.0
*400 x 400 400 x 400 13 21 22 218.70 172.00 66 600 22 400 17.5 10.10 3 330 1 120
450 x 200 450 x 200 9 14 18 96.80 76.00 33 500 1 870 18.6 4.40 1 490 187.0
500 x 200 500 x 200 10 16 20 114.20 89.60 47 800 2 140 20.5 4.33 1 910 214.0
600 x 200 600 x 200 11 17 22 134.40 106.00 77 600 2 280 24.0 4.12 2 590 228.0
600 x 300 588 x 300 12 20 28 192.50 151.00 118 000 9 020 24.8 6.85 4 020 601.0
*700 x 300 700 x 300 13 24 28 235.50 185.00 201 000 10 800 29.3 6.78 5 760 722.0
*800 x 300 800 x 300 14 26 28 267.40 210.00 292 000 11 700 33.0 6.62 7 290 782.0
Flange,
t2 Under 16 (0.630) + 1.5 (0.059)
16 to 25 (0.984). Excl + 2.0 (0.079)
25 to 40 (1.575), Excl. + 2.5 (0.098)
40 and over + 3.0 (0.118)
Thickness
Under 16 (0.630) + 1.0 (0.039)
16 to 25 (0.984). Excl + 1.5 (0.059)
25 to 40 (1.575), Excl. + 2.0 (0.079)
Web,
40 and over + 2.5 (0.098)
t1
7 m (23 ft) and under
+ 40 (1.575)
Over 7 m (23ft) -0
MECHANICAL PROPERTIES
ELONGATION, %
YIELD POINT / mm2 Thickness (mm) TENSILE
Thickness (mm)
CLASSIFICATION STRENGTH
N/mm2 5 or
16 or under over 16 5 to 16 over 16
under
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
8910-8040 Ext. 3330 890-0555
METRIC SIZE
Db
Original Castellated H Dc B t1 t2 r Ds Dtee Gross Net Ix Iy ix iy Zx Zy
flange
300 x 100 21.3 200 300 100 5.5 8 11 205 47.5 284 32.66 21.36 4306.8 134 14 2.5 287.1 26.8
200x100
297 x 99 18.2 198 297 99 4.5 7 11 202 47.5 283 27.64 18.50 3643.9 114 14 2.5 245.4 23
200x200 300 x 200 49.9 200 300 200 8 12 13 205 47.5 276 71.53 55.09 11139 1600 14 5.4 742.6 160
375 x 125 29.6 250 375 125 6 9 12 254 60.5 357 45.16 29.86 9491.5 294 18 3.1 506.2 47
250x125
372 x 124 25.7 248 372 124 5 8 12 253 59.5 356 38.88 26.21 8189.6 255 18 3.1 440.3 41.1
250x250 375 x 250 72.4 250 375 250 9 14 16 254 60.5 347 103.43 80.48 25477.5 3650 18 6.7 1358.8 292
450 x 150 36.7 300 450 150 6.5 9 13 305 72.5 432 56.53 36.67 16895.1 508 22 3.7 750.9 67.7
300x150
447 x 149 32 298 447 149 5.5 8 13 302 72.5 431 49 32.33 14664 442 21 3.7 656.1 59.3
300x300 450 x 300 94 300 450 300 10 15 18 305 72.5 420 134.8 104.25 47854.8 6751 21 8 2126.9 450
Depth of Depth of Depth Section
Section Width Thickness Castellated Between Area Radius
Corner Moment of Modulus of
Section Index of of
Radius Inertia Section
Section Gyration
Weight Original Castellated Web Flange hole tee flange Max Min
Db
Original Castellated H Dc B t1 t2 r Ds Dtee Gross Net Ix Iy ix iy Zx Zy
flange
525 x 175 49.6 350 525 175 7 11 14 354 85.5 503 75.39 50.54 31847.5 984 25 4.4 1213.2 112.5
350x175
519 x 174 41.4 346 519 174 6 9 14 350 84.5 501 63.06 42.00 25819.2 792 25 4.3 995 91
350x350 525 x 350 137 350 525 350 12 19 20 354 85.5 487 194.9 152.30 95013.1 13602 25 9.4 3619.5 777.2
600 x 200 66 400 600 200 8 13 16 405 97.5 574 100.12 67.68 55683.6 1740 29 5.1 1856.1 174
400x200
594 x 199 56.6 396 594 199 7 11 16 401 96.5 572 86.02 57.92 46656.1 1450 28 5 1570.9 145.7
450x200 675 x 200 76 450 675 200 9 14 18 454 110.5 647 117.01 76.06 78747.4 1871 32 5 2333.3 187
500x200 750 x 200 89.6 500 750 200 10 16 20 505 122.5 718 139.2 88.65 112856 2141 36 4.9 3009.5 214
600x200 900 x 200 106 600 900 200 11 17 22 605 147.5 866 167.4 100.80 184103 2282 43 4.8 4091.2 228.1
600x300 882 x 300 151 588 882 300 12 20 28 593 144.5 842 227.78 156.56 274533 9023 42 7.6 6225.2 601.4
400x400 600 x 400 172 400 600 400 13 21 22 405 97.5 558 244.7 191.99 156913 22403 29 11 5230.4 1120
700x300 1050 x300 185 700 1050 300 13 24 28 705 172.5 1002 281 189.29 473223 10805 50 7.6 9013.8 720.1
800x300 1200 x300 210 800 1200 300 14 26 28 805 197.5 1148 323.4 210.63 690342 11707 57 7.5 11505.7 780.1
Technical Specification :
- Material Specification refer to JIS G 3101 SS 400
- Equivalent with JIS G 3106 (SM 400A, SM 400B), ASTM A 36, BS 4360 Gr 43A, DIN 17100 St 3
- Standard Welded Process refer to AWS A5.18 (Gas Metal Arc. Welding), AWS A5.1 (Shielded Meta Arc. Welding), AWS A5.17 (Submerged Arc. Welding)
METRIC SIZE
t1 t2 Db
Original Castellated H Dc B r D add Ds Dtee Gross Net Ix Iy ix iy Zx Zy
flange
mm mm kg/m mm mm mm mm mm mm mm mm mm mm cm2 cm2 cm4 cm4 cm cm cm3 cm3
100x100 200 x 100 18.55 100 200 100 6 8 10 50 156 22 184 27.9 18.54 1712 134 9.61 2.69 171.2 26.8
150x75 300 x 75 15.5 150 300 75 5 7 8 75 231 34.5 286 25.35 13.8 3022 49 14.80 1.88 201.5 13.1
150x150 300 x 150 33.6 150 300 150 7 10 11 75 231 34.5 280 50.64 34.47 7308 563 14.56 4.04 487.2 75.1
400 x 100 23.5 200 400 100 5.5 8 11 100 306 47 384 38.16 21.33 8216 134 19.63 2.51 410.8 26.8
200x100
396 x 99 19.9 198 396 99 4.5 7 11 99 303 46.5 382 32.09 18.455 6917 114 19.36 2.49 349.3 23.0
200x200 400 x 200 53 200 400 200 8 12 13 100 306 47 376 79.53 55.05 20867 1600 19.47 5.39 1043.4 160.0
500 x 125 32.5 250 500 125 6 9 12 125 381 59.5 482 52.66 29.8 18055 294 24.61 3.14 722.2 47.0
250x125
496 x 124 28.1 248 496 124 5 8 12 124 378 59 480 45.08 26.18 15523 255 24.35 3.12 625.9 41.1
250x250 500 x 250 76.8 250 500 250 9 14 16 125 381 59.5 472 114.68 80.39 47611 3650 24.34 6.74 1904.4 292.0
600 x 150 40.5 300 600 150 6.5 9 13 150 456 72 582 66.28 36.64 32198 508 29.64 3.72 1073.3 67.7
300x150
596 x 149 35.2 298 596 149 5.5 8 13 149 453 71.5 580 57.19 32.275 27846 442 29.37 3.70 934.4 59.3
300x300 600 x 300 99.9 300 600 300 10 15 18 150 456 72 570 149.8 104.2 89361 6751 29.28 8.05 2978.7 450.1
700 x 175 54.4 350 700 175 7 11 14 175 531 84.5 678 87.64 50.47 60394 984 34.59 4.42 1725.5 112.5
350x175
692 x 174 45.4 346 692 174 6 9 14 173 525 83.5 674 73.44 41.94 48949 792 34.16 4.35 1414.7 91.0
350x350 700 x 350 141.62 350 700 350 12 19 20 175 531 84.5 662 215.9 152.18 177408 13602 34.14 9.45 5068.8 777.3
800 x 200 72.3 400 800 200 8 13 16 200 606 97 774 116.12 67.64 105531 1740 39.50 5.07 2638.3 174.0
400x200
792 x 199 62.1 396 792 199 7 11 16 198 600 96 770 99.88 57.88 88376 1450 39.08 5.01 2231.7 145.7
450x200 900 x 200 83.9 450 900 200 9 14 18 225 681 109.5 872 137.26 75.97 150151 1871 44.46 4.96 3336.7 187.1
500x200 1000 x 200 99.5 500 1000 200 10 16 20 250 756 122 968 164.2 88.6 216055 2141 49.38 4.92 4321.1 214.1
600x200 1200 x 200 118.5 600 1200 200 11 17 22 300 906 147 1166 200.4 100.74 355610 2282 59.41 4.76 5926.8 228.2
600x300 1176 x 300 165 588 1176 300 12 20 28 294 888 144 1136 263.06 156.5 519725 9023 57.63 7.59 8838.9 601.5
400x400 800 x 400 177.5 400 800 400 13 21 22 200 606 97 758 270.7 191.92 292713 22403 39.05 10.80 7317.8 1120.2
700x300 1400 x 300 191.1 700 1400 300 13 24 28 350 1056 172 1352 326.5 189.22 898606 10805 68.91 7.56 12837.2 720.3
800x300 1600 x 300 218 800 1600 300 14 26 28 400 1206 197 1548 379.4 210.56 1317191 11707 79.09 7.46 16464.9 780.5
SPECIFICATION
DIMENSIONAL TOLERANCE
Flange Width (B) Depth (Dc) (mm) Depth of cell form hole
(mm) Under 400 400 - 600 600 & Over (Ds)
+ 3.0 + 4.0 + 5.0 + 6.0 (mm)
+ 3.0
MECHANICAL PROPERTIES
ELONGATION, %
YIELD POINT / mm2 Thickness (mm) TENSILE
Thickness (mm)
CLASSIFICATION STRENGTH
16 or under over 16 N/mm2 5 or under 5 to 16 over 16
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
STANDARD SECTIONAL DIMENSION INFORMATIVE REFERENCE
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
STANDARD SECTIONAL DIMENSION INFORMATIVE REFERENCE
Sec-
Depth Center Geometrical Radius of
Flange Thickness tional Unit Corner Modulus of
Section of of Moment of
Width Web Flange Area Weight Radius Section
Index Section Gravity of Inertia gyration
H1 H2 B t1 t2 r A x y Ix Iy ix iy Zx Zy
mm mm mm mm mm mm mm cm2 kg/m mm 4 4 cm cm 3 3
mm cm cm cm cm
Q 150 x
150 113 75 5 7 8 26.78 21.0 57.3 75 691 310 5.08 3.40 92.1 53.99
75
Q 200 x
200 151.25 100 6 8 11 40.74 32.0 76.6 100 1,907 848 6.84 4.56 190.7 110.72
100
Q 198 x
198 149.25 99 5 7 11 34.77 27.3 76.1 99 1,637 722 6.86 4.56 165.3 94.86
99
Q 250 x
250 189 125 6 9 12 56.49 44.4 95.9 125 4,197 1,844 8.62 5.71 335.8 192.34
125
Q 248 x
248 187 124 5 8 12 49.02 38.5 95.4 124 3,670 1,599 8.65 5.71 296.0 167.62
124
Q 300 x
300 226.75 150 7 9 13 70.17 55.1 114.7 150 7,464 3,260 10.31 6.82 497.6 284.16
150
Q 298 x
298 224.75 149 6 8 13 61.20 48.1 114.2 149 6,545 2,842 10.34 6.81 439.3 248.76
149
Q 350 x
350 264.5 175 7 11 14 94.71 74.4 134.5 175 14,092 6,096 12.20 8.02 805.3 453.30
175
Q 346 x
346 261.5 174 6 9 14 79.02 62.1 133.3 173 11,496 4,978 12.07 7.94 664.5 373.37
174
Q 400 x
400 302.5 200 8 13 16 126.18 99.1 153.9 200 24,570 10,661 13.95 9.19 1,228.4 692.79
200
Q 396 x
396 299.5 199 7 11 16 108.24 85.0 152.8 198 20,725 8,984 13.84 9.11 1,047.2 588.07
199
Q 450 x
450 328 200 9 14 18 145.14 114.0 159.3 225 34,436 14,572 15.40 10.02 1,530.5 914.48
200
Q 500 x
500 353.5 200 10 16 20 171.30 134.5 165.2 250 48,871 20,386 16.89 10.91 1,954.8 1,234.37
200
Q 600 x
600 404 200 11 17 22 201.60 158.3 175.7 300 78,739 32,097 19.76 12.62 2,624.6 1,826.74
200
Q 588 x
588 448.5 300 12 20 28 288.75 226.7 229.7 294 122,509 53,713 20.60 13.64 4,167.0 2,338.03
300
*Q 700 x
700 505 300 13 24 28 353.25 227.4 243.7 350 206,406 86,629 24.17 15.66 5,897.1 3,555.3
300
*Q 800 x
800 555.5 300 14 26 28 401.10 315.0 255.1 400 297,859 121,518 27.25 17.41 7,446.3 4,763.91
300
Note: - H = H/2 = height of T-Beam.
- Tolerance H = + 3 mm.
- Material specification refer to Wide Flange Shape.
- Welded specification refer to JIS G 3106 (SM 400A, SM 400B, SM 490A, SM 490B, SM 490YA,
SM 490YB)
- Equivalent with ASTM A 36, BS 4360 Gr 43A, DIN 17100 St 37
- Standard welded process refer to standard AWS A5.18 (Gas Metal Arc. Welding), AWS A5.1
(Shielded Metal Arc. Welding), AWS A5.17 (Submerged Arc. Welding)
- * are made from IWF import.
Yield Strength Tensile Strength
Thicness
STANDARD GRADE (Fy) (Ft)
(mm)
N/mm2 N/mm2
< 16 245
JIS G 3101 SS 600 400 - 510
> 16 235
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
STANDARD SECTIONAL DIMENSION INFORMATIVE REFERENCE
Depth Width Thickness Sectional Center Modulus
Corner Area Moment of Radius of
Section of of Weight of of
Web Flange Radius Inertia Gyration
Index Section Section Gravity Section
H B t1 t2 r A y Ix Iy ix iy Zx Zy
mm mm mm mm mm mm cm2 kg/m mm cm4 cm4 cm cm cm3 cm3
T 50 x
50.0 100 6.0 8 10 10.95 8.60 40.0 16 67 1.20 2.47 4.0 13.4
100
T 62.5 x
62.5 125 6.5 9 10 15.16 11.90 50.6 35 147 1.51 3.11 6.9 23.5
125
T 75 x
75.0 75 5.0 7 8 8.93 7.00 57.0 42 25 2.18 1.67 7.4 6.6
75
T 75 x
75.0 150 7.0 10 11 20.07 15.75 61.3 66 282 1.81 3.75 10.8 37.6
150
T 100 x
100.0 100 5.5 8 11 13.58 10.65 71.7 114 67 2.90 2.22 14.8 13.4
100
T 99 x
99.0 100 4.5 7 11 11.59 9.10 78.1 94 58 2.84 2.25 12.0 11.7
100
T 87.5 x
87.50 175 7.5 11 12 25.61 20.10 72.0 114 492 2.11 4.38 15.8 56.2
175
T 100 x
100.00 200 8.0 12 13 31.77 24.95 82.7 184 801 2.41 5.02 22.2 80.1
200
T 125 x
125.00 125 6.0 9 12 18.83 14.80 97.2 248 147 3.63 2.79 25.5 23.5
125
T 124 x
124.00 124 5.0 8 12 16.34 12.85 97.7 207 127 3.56 2.79 21.2 20.5
124
T 125 x
125.00 250 9.0 14 16 46.09 36.20 104.2 411 1,825 2.98 6.29 39.4 146.0
250
T 150 x
150.00 150 6.5 9 13 23.39 18.35 115.9 463 254 4.45 3.29 39.9 33.8
150
T 149 x
149.00 149 5.5 8 13 20.40 16.00 116.4 393 221 4.39 3.29 33.7 29.6
149
T 150 x
150.00 300 10.0 15 18 59.90 47.00 125.3 796 3,378 3.64 7.51 63.5 225.2
300
T 175 x
175.00 175 7.0 11 14 31.57 24.80 137.5 814 492 5.08 3.95 59.2 56.3
175
T 173 x
173.00 174 6.0 9 14 26.34 20.70 136.0 678 396 5.07 3.88 49.9 45.5
174
T 175 x
175.00 350 12.0 19 20 86.95 68.85 146.4 1,515 6,794 4.17 8.84 103.5 388.2
350
T 200 x
200.00 200 8.0 13 16 42.06 33.00 157.7 1,395 868 5.76 4.54 88.5 86.8
200
T 198 x
198.00 199 7.0 11 16 36.08 28.30 156.3 1,193 723 5.75 4.48 76.5 72.7
199
* T 200
200.00 400 13.0 21 22 109.35 86.00 167.9 2,470 11,207 4.75 10.12 147.1 560.4
x 400
METRIC SIZE
STANDARD SECTIONAL DIMENSION INFORMATIVE REFERENCE
Depth Width Thickness Sectional Center Modulus
Corner Area Weight Moment of Radius of
Section of of of of
Web Flange Radius Inertia Gyration
Index Section Section Gravity Section
H B t1 t2 r A y Ix Iy ix iy Zx Zy
mm mm mm mm mm mm cm2 kg/m mm cm4 cm4 cm cm cm3 cm3
T 225 x
225.00 200 9.0 14 18 48.38 38.00 173.5 2,155 936 6.67 4.40 124.2 93.6
200
T 250 x
250.00 200 10.0 16 20 57.10 44.80 190.5 3,210 1,071 7.50 4.33 168.5 107.1
200
T 300 x
300.00 200 11.0 17 22 67.20 53.00 221.6 5,786 1,139 9.29 4.12 261.9 113.9
200
T 294 x
294.00 300 12.0 20 28 96.25 75.50 233.2 6,695 4,509 8.34 6.84 295.3 300.6
300
* T 350
350.00 300 13.0 24 28 117.75 92.50 274.5 12,015 5,412 10.10 6.78 447.3 360.8
x 300
* T 400
400.00 300 14.0 26 28 133.70 105.00 308.3 18,787 5,866 11.85 6.62 609.5 391.1
x 300
Note: - Material come from Wide Flange Shape.
- Size and material tolerance refer to JIS G 3192
- Material Specification refer to JIS G 3101 SS 400
- Welded Specification refer to JIS G 3106 (SM 400A, SM 400B, SM 490A, SM 490B, SM 490YA, SM
490YB)
- Equivalent with ASTM A 36, BS 4360 Gr 43A, DIN 17100 St 37
- * Special for import material
Tensile Strength
Thicness Yield Strength (Fy)
STANDARD GRADE (Ft)
(mm) N/mm2
N/mm2
< 16 245
JIS G 3101 SS 400 > 16 - 40 235 400 - 510
> 40 215
For further information about this product, please contact : better call by DID
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
AxB t1 t2 A w Cy Ix Iy Zx Zy ix iy Zx Zy
2
mm x mm mm mm cm kg/m cm cm4 cm4 cm3 cm3 cm cm cm3 cm3
75 x 40 5 7 8.818 6.92 1.27 75.9 12.4 20.2 4.54 2.93 1.19 20.2 4.54
100 x 50 5 7.5 11.92 9.36 1.55 189 26.9 37.8 7.82 3.98 1.50 37.8 7.82
125 x 65 6 8 17.11 13.40 1.94 425 65.5 68.0 14.40 4.99 1.96 68 14.4
150 x 75 6.5 10 23.71 18.60 2.31 864 122.0 115.0 23.60 6.04 2.27 115 23.6
150 x 75 9 12.5 30.59 24.00 2.31 1050 147.0 140.0 28.30 5.86 2.19 140 28.3
180 x 75 7 10.5 27.20 21.40 2.15 1380 137.0 150.0 25.50 7.13 2.24 150 25.5
200 x 70 7 10 26.92 21.10 1.85 1620 113.0 162.0 21.80 7.77 2.04 162 21.8
200 x 80 7.5 11 31.33 24.60 2.24 1950 177.0 195.0 30.80 7.89 2.38 195 30.8
200 x 90 8 13.5 38.65 30.30 2.77 2490 286.0 249.0 45.90 8.03 2.72 249 45.9
250 x 90 9 13 44.07 34.60 2.43 4180 306.0 335.0 46.50 9.74 2.64 335 46.5
250 x 90 11 14.5 51.17 40.20 2.39 4690 342.0 375.0 51.70 9.57 2.58 375 51.7
300 x 90 10 15.5 55.74 43.80 2.33 7400 373.0 494.0 56.00 11.50 2.54 494 56
300 x 90 12 16 61.90 48.60 2.25 7870 391.0 525.0 57.90 11.30 2.51 525 57.9
380 x 100 10.5 16 69.39 54.50 2.41 14500 557.0 762.0 73.30 14.50 2.83 762 73.3
380 x 100 13 16.5 78.96 62.00 2.29 15600 584.0 822.0 75.80 14.10 2.72 822 75.8
380 x 100 13 20 85.71 67.30 2.50 17600 671.0 924.0 89.50 14.30 2.80 924 89.5
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Tanti 0818-965390 tanti@grdsteel.com 8983-8160 8983-8298 890-0666 Ext 6110 8910-7711
Lisa 0819-702831 lisa@grdsteel.com 8983-8161 8983-8168 890-0666 Ext 6119 8910-7711
Pardiman 0818-871636 pardiman@grdsteel.com 8983-8162 8983-8168 890-0666 Ext 6118 8910-7711
Export :
0818-488956 skamarudin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext 6118 890-0555
Suwanto
Material Supply :
- Supply re-colled coil conforming to ASTM A 572 / A 572 M-94C grade 50
- Thickness 4.5 mm
- Carbon equivalent (CE) shall not exceed 0.43
- Tensile Strength shall not exceed 580 N/mm2
- Minimum content of Silicon shall be 0.15%
- Mill certificates shall be supplied for all steel produced
Manufacturing :
- Slit and cut coil to suit
- Roll form and punch plates as shown on drawings 311-D-604 and 311-D-605 (see attached). In
accordance with plate
schedule for Gunung raja Paksi (see attached).
- Part Mark DSA. 3.195 deck sheets required, total weight 543.470 tonnes.
- Part Mark DSB. 5.900 deck sheets required, total weight 780.570 tonnes.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Sujono 0818-148519 sujono@grdsteel.com 8983-8190 8983-8198 890-1570 Ext 6200 890-0555
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
MECHANICAL PROPERTIES
Product Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) 2 2 (%) Temp. (Joule)
(N/mm ) (N/mm )
MECHANICAL PROPERTIES
Product Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) 2 2 (%) Temp. (Joule)
(N/mm ) (N/mm )
S 275 JR 6 - 80 < 16 275 410 - 560 22 (5.65VSo) -
> 16 < 40 265 22 (5.65VSo) 20 oC [27]
> 40 < 63 255 21 (5.65VSo) ( asper order )
> 63 < 80 245 20 (5.65VSo)
S 275 JO 6 - 80 < 16 275 410 - 560 22 (5.65VSo) - 0 oC [27]
> 16 < 40 265 22 (5.65VSo) FOR GENERAL STRUCTURE
EN 10025
> 40 < 63 255 21 (5.65VSo) PURPOSE
> 63 < 80 245 20 (5.65VSo)
S 275 J2G3 6 - 80 < 16 275 410 - 560 22 (5.65VSo) - -20 oC [27]
> 16 < 40 265 22 (5.65VSo)
> 40 < 63 255 21 (5.65VSo)
> 63 < 80 245 20 (5.65VSo)
JIS G 3101 SS - 400 6 - 80 < 16 245 400 - 510 17(200 mm) Bending - ROLLED STEEL FOR
>16 < 40 235 21 (200 mm) 180o GENERAL STRUCTURE
>40 215 23 (RB-50mm) 1.5 x t
JIS G 3106 SM 400 A 6 - 80 < 16 245 400 - 510 18 (200 mm) - - FOR GENERAL STRUCTURE
> 16 < 40 235 22 (200 mm)
> 40 215 24 (RB-50mm)
SM 400 B 6 - 80 < 16 245 400 - 510 18 (200 mm) - 0 oC [27]
> 16 < 40 235 22 (200 mm)
> 40 215 24 (RB-50mm)
SM 400 C 6 - 80 < 16 245 400 - 510 18 (200 mm) - 0 oC [47] PURPOSE
> 16 < 40 235 22 (200 mm)
> 40 215 24 (RB-50mm)
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
PRESSURE VESSEL
MECHANICAL PROPERTIES
Product Thickness Tensile Test Impact Test
SPECIFICATION GRADE Bend APPLICATION
Thickness Range YS min UTS E min Average
2
(mm) (mm) (N/mm ) (N/mm2) (%) Test Temp. (Joule)
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
SHIP BUILDING PLATE
MECHANICAL PROPERTIES
Product Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) 2 2 (%) Temp. (Joule)
(N/mm ) (N/mm )
A 6 - 50 - 235 400 - 520 22 (5.65 V So) - - STEEL PLATES FOR USE
A. B. S.
B 8 - 75 - 235 400 - 520 22 (5.65 V So) - 0o [27] IN SHIP CONSTRUCTION
STEEL PLATES FOR USE
B. K. I. A 6 - 50 - 235 400 - 520 22 (5.65 V So) - -
IN SHIP CONSTRUCTION
A 8 - 50 - 235 400 - 520 22 (5.65 V So) -
B 8 - 50 - 235 400 - 520 22 (5.65 V So) 0o [27] STEEL PLATES FOR USE
L. R. IN SHIP CONSTRUCTION
360 AR 8 - 40 - 190 360 - 480 24 (5.65 V So) - -
410 AR 8 - 40 - 215 410 - 530 22 (5.65 V So) - -
A 8 - 50 - 235 400 - 520 22 (5.65 V So) - -
B 8 - 50 - 235 400 - 520 22 (5.65 V So) - 0o [27]
D 8 - 25 - 235 400 - 520 22 (5.65 V So) - -20o [27]
A32 8 - 50 - 315 440 - 570 22 (5.65 V So) - 0o [31]
G. L. D32 8 - 50 - 315 440 - 570 22 (5.65 V So) - -20o [31] STEEL PLATES FOR USE
A36 8 - 50 - 355 490 - 630 21 (5.65 V So) - 0o [34] IN SHIP CONSTRUCTION
D36 8 - 50 - 355 490 - 630 21 (5.65 V So) - -20o [34]
A40 8 - 12 - 390 510 - 660 20 (5.65 V So) - 0o [41]
D40 8 - 12 - 390 510 - 660 20 (5.65 V So) - -20o [41]
A 6 - 50 - 235 400 - 520 22 (5.65 V So) - -
B. V. B 8 - 50 - 235 400 - 520 22 (5.65 V So) - 0o [27] STEEL PLATES FOR USE
D 8 - 35 - 235 400 - 520 22 (5.65 V So) - -20o [27] IN SHIP CONSTRUCTION
A 8 - 50 - 235 400 - 520 22 (5.65 V So) - -
B 8 - 50 - 235 400 - 520 22 (5.65 V So) - 0o [27]
D. N. V. D 8 - 50 - 235 400 - 520 22 (5.65 V So) - -20o [27] STEEL PLATES FOR USE
A36 8 - 50 - 355 490 - 630 21 (5.65 V So) - 0o [34] IN SHIP CONSTRUCTION
D36 8 - 50 - 355 490 - 630 21 (5.65 V So) - -20o [34]
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
HIGH STRENGTH LOW ALLOY
MECHANICAL PROPERTIES
Product Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) 2 2 (%) Temp. (Joule)
(N/mm ) (N/mm )
42 6-80 - 290 415 20 (200 min) - - FOR WELDED CONSTRUCTION
ASTM A 572 50 6-80 - 345 450 18 (200 min) - -
WITH IMPROVED NOTCH TOUGHNESS
55 6-80 - 380 485 17 (200 min) - -
< 16 275
> 16 < 40 265
43 D 8-80 430-580 20 (200 mm) - - 20 0C [27]
> 40 < 63 255
> 63 < 80 245
< 16 355
> 16 < 40 345
50 A 8-80 490-640 18 (200 mm) - -
> 40 < 63 240
> 63 < 80 325
< 16 355 GENERAL STRUCTURE WITH
20 0C [27]
> 16 < 40 345 SUPERIOR WELDABILITY
BS 4360 50 B 8-80 490-640 18 (200 mm) -
> 40 < 63 240
(asper order)
> 63 < 80 325
< 16 355
> 16 < 40 345
50 C 8-80 490-640 18 (200 mm) - 0 0C [27]
> 40 < 63 240
> 63 < 80 325
< 16 355
> 16 < 40 345
50 D 8-80 490-640 18 (200 mm) - - 20 0C [27]
> 40 < 63 240
> 63 < 80 325
> 8 < 12 360 GENERAL STRUCTURE WITH
AS 3672 50 D 8-80 > 12 < 20 350 450 min 18 (200 mm) - -
SUPERIOR WELDABILITY
>0 340
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
high tensile plate
MECHANICAL PROPERTIES
Product Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) 2 2 (%) Temp. (Joule)
(N/mm ) (N/mm )
> 8 < 12 360 GENERAL STRUCTURE WITH
AS 3678 350 8 - 80 >12 < 20 350 450 min 18 (200 mm) - -
SUPERIOR WELDABILITY
> 20 340
< 16 325 17 (200 mm)
SM 490 A 8 - 80 > 16 < 40 315 490 - 610 21 (200 mm) - -
> 40 < 75 295 23 (RB-50mm)
< 16 325 17 (200 mm)
o
SM 490 B 8 - 80 > 16 < 40 315 490 - 610 21 (200 mm) - 0 C [27]
> 40 295 23 (RB-50mm)
< 16 325 17 (200 mm) GENERAL STRUCTURE WITH
JIS G 3106 SM 490 C 8 - 80 > 16 < 40 315 490 - 610 21 (200 mm) - 0 oC / 47 SUPERIOR WELDABILITY
> 40 295 23 (RB-50mm)
< 16 365 15 (200 mm)
SM 490 YA 8 - 80 > 16 < 40 355 490 - 610 19 (200 mm) - -
> 40 335 21 (RB-50mm)
< 16 365 15 (200 mm)
SM 490 YB 8 - 80 > 16 < 40 355 490 - 610 19 (200 mm) - 0 oC [27]
> 40 335 21 (RB-50mm)
< 16 355 22 (200 mm) GENERAL STRUCTURE WITH
DIN 17100 ST 52.3 8 - 80 >16 < 40 345 510 - 630 21 (200 mm) 2XT/180o o
0 / 27
SUPERIOR WELDABILITY
>40 335 20 (200 mm)
< 16 355 22 (5.65VSo) o
20 C [27]
> 16 < 40 345 22 (5.65VSo)
S 355 JR 8 - 80 490 - 630 -
> 40 < 63 335 21 (5.65VSo)
( asper order )
> 63 < 80 325 20 (5.65VSo)
< 16 355 22 (5.65VSo)
> 16 < 40 345 22 (5.65VSo) o GENERAL STRUCTURE WITH
EN 10025 S 355 JO 8 - 80 490 - 630 - 0 C [27]
> 40 < 63 335 21 (5.65VSo) SUPERIOR WELDABILITY
> 63 < 80 325 20 (5.65VSo)
< 16 355 22 (5.65VSo)
> 16 < 40 345 22 (5.65VSo)
S 355 J2G3 8 - 80 490 - 630 - -20 oC [27]
> 40 < 63 335 21 (5.65VSo)
> 63 < 80 325 20 (5.65VSo)
< 16 285
JIS G 3101 SS 490 8 - 80 >16 < 40 275 490 - 610 18 (200 mm) - - -
> 40 255
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
HOT ROLLED COIL
MECHANICAL PROPERTIES
Product
Thickness Tensile Test Bend Impact Test
SPECIFICATION GRADE APPLICATION
Thickness Range YS min UTS E min Test Average
(mm) (mm) (N/mm2) (N/mm2) on 50.8 mm Temp. (Joule)
1,6 < 2 29 (50 mm)
Bending
2 < 2.5 29 (50 mm)
SPHC 1,8 - 14 2.5 < 3.2 - 270 min 29 (50 mm) 180o - COMMERCIAL QUALITY
3.2 < 4 31 (50 mm) 0.5 x t DRAWING PURPOSE
JIS G 3131 >4 31 (50 mm)
2 < 2.5 33 (50 mm)
2.5 < 3.2 35 (50 mm) DRAWING QUALITY
SPHD 1,8 - 14 - 270 min - -
3.2 < 4 37 (50 mm) COLD ROLLABLE
>4 39 (50 mm)
1,6 < 3,0 32 (50 mm) Bending
WELDED STEEL
SPHT - 1 1,8 - 13 3,0 <6,0 - 275 min 35 (50 mm) Over 3 mm -
PIPES AND TUBES
6,0 < 13 37 (50 mm) 0.5 x t
Bending
1,6 < 3,0 27 (50 mm)
180o WELDED STEEL
SPHT - 2 1,8 - 13 - 343 min - PIPES AND TUBES
3,0 < 6,0 30 (50 mm) Over 3 mm
JIS G 3132 1,5 x t
6,0 < 13 32 (50 mm)
Bending
1,6 < 3,0 22 (50 mm)
180o
WELDED STEEL
SPHT - 3 2,0 - 13 3,0 < 6,0 - 412 min 25 (50 mm) Over 3 mm -
PIPES AND TUBES
6,0 < 13 27 (50 mm) 2,0 x t
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Plate
FROM THICKNESS AND SIZE
Width x Length 1219 1219 1524 1524 1524 1524 1829 1829 2133 2133 2438 2438 2743 2743 3048 3048 3353 3353
x x x x x x x x x x x x x x x x x x
(In mm)
2438 6096 3048 6096 9144 12192 6096 12192 6096 12192 6096 12192 6096 12192 6096 12192 6096 12192
Width x Length 4' x 8' 4' x 20' 5' x 10' 5' x 20' 5' x 30' 5' x 40' 6' x 20' 6' x 40' 7' x 20' 7' x 40' 8' x 20' 8' x 40' 9' x 20' 9' x 40' 10' x 20' 10' x 40' 11' x 20' 11' x 40'
(In ft)
48x96 48x240 60x120 60x240 60x360 60x480 72x240 72x480 84x240 84x480 96x240 96x480 108x240 108x480 120x240 120x480 132x240 132x480
(In Inch)
Thickness (mm)
8 187 467 292 583 875 1.167 700 1.400 817 1.634 933 1.867 1.051 2.100 1.167 2.334 1.284 2.567
9 210 525 328 656 985 1.313 788 1.575 919 1.837 1.050 2.100 1.182 2.363 1.313 2.625 1.444 2.888
10 233 583 365 729 1.094 1.459 875 1.750 1.021 2.042 1.167 2.333 1.313 2.625 1.459 2.917 1.605 3.209
12 280 700 438 875 1.313 1.750 1.050 2.101 1.225 2.450 1.400 2.800 1.575 3.151 1.750 3.501 1.925 3.851
12,7 296 741 463 926 1.389 1.112 1.112 2.223 1.296 2.593 1.482 2.963 1.667 3.334 1.852 3.705 2.038 4.076
14 327 817 510 1.021 1.532 1.225 1.225 2.451 1.429 2.858 1.634 3.267 1.838 3.675 2.042 4.084 2.246 4.493
15 350 875 547 1.094 1.641 1.313 1.313 2.626 1.532 3.062 1.750 3.500 1.969 3.938 2.188 4.376 2.407 4.814
16 373 933 584 1.167 1.750 2.334 1.400 2.801 1.634 3.266 1.867 3.734 2.100 4.201 2.334 4.667 2.567 5.134
18 420 1.050 656 1.313 1.969 2.625 1.575 3.151 1.837 3.675 2.100 4.200 2.363 4.725 2.625 5.251 2.888 5.776
19 443 1.108 693 1.386 2.078 2.771 1.663 3.326 1.939 3.879 2.217 4.433 2.494 4.988 2.771 5.543 3.049 6.097
20 467 1.167 729 1.459 2.188 2.917 1.751 3.501 2.041 4.083 2.333 4.667 2.625 5.250 2.917 5.834 3.209 6.418
22 513 1.283 802 1.604 2.407 3.209 1.926 3.851 2.246 4.491 2.567 5.133 2.888 5.776 3.209 6.418 3.530 7.060
24 560 1.400 875 1.750 2.625 3.501 2.101 4.201 2.450 4.900 2.800 5.600 3.150 6.301 3.501 7.001 3.851 7.702
25 583 1.458 912 1.823 2.735 3.646 2.188 4.376 2.552 5.104 2.917 5.833 3.282 6.563 3.646 7.293 4.011 8.023
25,4 593 1.482 926 1.852 2.779 3.705 2.223 4.446 2.593 5.185 2.963 5.927 3.334 6.668 3.705 7.410 4.076 8.151
26 607 1.517 948 1.896 2.844 3.792 2.276 4.551 2.654 5.308 3.033 6.067 3.413 6.826 3.792 7.585 4.172 8.344
28 653 1.633 1.021 2.042 3.063 4.084 2.451 4.901 2.858 5.716 3.267 6.534 3.676 7.351 4.084 8.168 4.493 8.985
30 700 1.750 1.094 2.188 3.282 4.376 2.626 5.251 3.062 6.124 3.500 7.000 3.938 7.876 4.376 8.751 4.814 9.627
32 747 1.867 1.167 2.334 3.501 4.668 2.801 5.602 3.266 6.533 3.733 7.467 4.200 8.401 4.667 9.335 5.134 10.269
36 840 2.100 1.313 2.625 3.938 5.251 3.151 6.302 3.675 7.349 4.200 8.400 4.725 9.451 5.251 10.502 5.776 11.553
38 887 2.217 1.386 2.771 4.157 5.543 3.326 6.652 3.879 7.757 4.433 8.867 4.988 9.976 5.543 11.085 6.097 12.194
40 933 2.333 1.459 2.917 4.376 5.834 3.501 7.001 4.083 8.166 4.667 9.334 5.250 9.334 5.834 11.669 6.418 12.836
45 1.050 2.625 1.641 3.282 4.923 6.564 3.938 7.877 4.593 9.186 5.250 10.500 5.907 11.814 6.564 13.127 7.220 14.441
50 1.167 2.917 1.823 3.646 5.470 7.293 4.376 8.752 5.104 10.207 5.833 11.667 6.563 13.126 7.293 14.586 8.023 16.045
55 1.283 3.209 2.006 4.011 6.017 8.022 4.814 9.628 5.614 11.228 6.417 12.833 7.219 14.439 8.022 16.044 8.825 17.650
60 1.400 3.500 2.188 4.376 6.564 8.752 5.251 10.503 6.124 12.249 7.000 14.000 7.876 15.751 8.751 17.503 9.627 19.254
65 1.516 3.792 2.370 4.740 7.111 9.481 5.689 11.378 6.635 13.269 7.583 15.167 8.532 17.064 9.481 18.962 10.429 20.859
70 1.633 4.083 2.553 5.105 7.658 10.210 6.127 12.253 7.145 14.290 8.167 16.333 9.188 18.377 10.210 20.420 11.232 22.463
75 1.750 4.375 2.735 5.470 8.204 10.939 6.565 13.129 7.655 15.311 8.750 17.500 9.845 19.689 10.939 21.879 12.034 24.068
80 1.866 4.667 2.917 5.834 8.751 11.669 7.002 14.004 8.166 16.331 9.333 18.667 10.501 21.002 11.669 23.337 12.836 25.672
85 1.983 4.958 3.099 6.199 9.298 12.398 7.440 14.879 8.676 17.352 9.917 19.833 11.157 22.315 12.398 24.796 13.639 27.277
90 2.100 5.250 3.282 6.564 9.845 13.127 7.877 15.754 9.186 18.373 10.500 21.000 11.814 23.627 13.127 26.254 14.441 28.882
95 2.217 5.542 3.464 6.928 10.392 13.856 8.315 16.630 9.697 19.394 11.083 22.167 12.470 24.940 13.856 27.713 15.243 30.486
100 2.333 5.833 3.646 7.293 10.939 14.586 8.753 17.505 10.207 20.414 11.667 23.333 13.126 26.252 14.586 29.172 16.045 32.091
2
Calculated considering specific grafity of steel as 7,85 Kg/mm , and dimension in mm.
Not Available Sizes
Local Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Sujono sujono.psc@grdsteel.com 0818-148519 89838-190 89838-198 890-1570 6200 8900-555
Tody tody.cro@grdsteel.com 0817-719909 89838-191 89838-198 890-1570 6201 8900-555
Susi susi@grdsteel.com 0812-8495906 89838-194 89838-198 890-1570 6220 8900-555
Budi budi@grdsteel.com 0818-241581 89838-195 89838-198 890-1570 6221 8900-555
Export Sales :
Nama e-mail Handphone DID Phone DID Fax IDD Phone Ext. IDD Fax
Suwanto dte@grdsteel.com 0818-488956 89838-032 89838-138 8910-8040 3320 8900-555
Capping, Flashing & PT. GUNUNG RAJA PAKSI
Steel Is Our Business
Trim
METRIC SIZE
WIDTH WEIGHT
THICKNESS LENGTH
MATERIAL SHEET
PART NO. TYPE
mm mm mm Kg
ERC-01 Exterior Ridge Cap 400 0.45 3000 4.44
IRC-01 Interior Ridge Cap 300 0.45 3000 3.33
DTM-01 Drip Trim 200 0.45 3000 2.22
GTM-01 Gable Trim 372 0.45 3000 4.14
ETM-01 Eave Trim 270 0.45 3000 3.00
RFL-01 Roof Flashing 150 0.45 3000 1.68
CTM-01 Corner Trim 180 0.45 3000 2.01
HTM-01 Head Trim 173 0.45 3000 1.92
FTM-01 Flashing Trim 240 0.45 3000 2.67
CLT-01 Closure Trim 234 0.45 3000 2.61
CFL-01 Cap Flashing 502 0.45 3000 5.58
OCT-01 Outside Corner Trim 220 0.45 3000 2.43
OCT-02 Outside Corner Trim 333 0.45 3000 3.69
STM-01 Sill Trim 248 0.45 3000 2.76
SET-01 Soffit Edge Trim 175 0.45 3000 1.96
CABLE TRIM
372
GTM-01 0.45 3000 4.14
(460)
EAVE TRIM
CAP FLASHING
372
CLF-01 0.45 3000 4.14
(460)
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
Copyright 1997-2003 Advanced Marketing 2000, All Rights Reserved
C-Channel PT. GUNUNG RAJA PAKSI
COLD FORMED Steel Is Our Business
METRIC SIZE
THICK SECTION CENTER OF CENTER OF MOMENT OF RADIUS OF MODULUS OF
DIMENSION UNIT
NESS AREA GRAVITY SHEAR INERTIA GYRATION SECTION
WEIGHT
HxB t A Cx Cy Sx Sy Ix Iy ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
80 x 35 4.0 4.30 5.47 0.00 1.00 2.04 0.00 49.74 6.14 3.01 1.06 12.44 2.45
2.0 2.41 3.07 0.00 1.09 2.49 0.00 30.85 4.90 3.17 1.26 7.71 1.68
2.5 2.98 3.79 0.00 1.11 2.48 0.00 37.57 5.99 3.15 1.26 9.39 2.08
80 x 40 3.0 3.54 4.50 0.00 1.14 2.47 0.00 43.92 7.03 3.12 1.25 10.98 2.46
4.0 4.61 5.87 0.00 1.18 2.46 0.00 55.52 8.97 3.07 1.24 13.88 3.19
5.0 5.63 7.18 0.00 1.23 2.44 0.00 65.72 10.73 3.03 1.22 16.43 3.88
3.0 3.77 4.80 0.00 1.33 2.91 0.00 48.37 9.76 3.17 1.43 12.09 3.08
80 x 45 4.0 4.93 6.27 0.00 1.38 2.89 0.00 61.30 12.50 3.13 1.41 15.33 4.01
5.0 6.03 7.68 0.00 1.43 2.88 0.00 72.76 15.00 3.08 1.40 18.19 4.88
2.5 3.37 4.29 0.00 1.51 3.35 0.00 45.08 11.09 3.24 1.61 11.27 3.18
3.0 4.01 5.10 0.00 1.53 3.35 0.00 52.82 13.07 3.22 1.60 13.20 3.77
80 x 50 4.0 5.24 6.67 0.00 1.58 3.34 0.00 67.08 16.78 3.17 1.59 16.77 4.91
5.0 6.42 8.18 0.00 1.63 3.32 0.00 79.80 20.19 3.12 1.57 19.95 5.99
5.5 6.99 8.91 0.00 1.66 3.32 0.00 85.61 21.78 3.10 1.56 21.40 6.51
80 x 55 4.0 5.55 7.07 0.00 1.79 3.79 0.00 72.87 21.86 3.21 1.76 18.22 5.89
2.5 3.76 4.79 0.00 1.93 4.25 0.00 52.59 18.27 3.31 1.95 13.15 4.48
3.0 4.48 5.70 0.00 1.95 4.25 0.00 61.72 21.56 3.29 1.94 15.43 5.33
80 x 60
4.0 5.87 7.47 0.00 2.00 4.24 0.00 78.65 27.81 3.24 1.93 19.66 6.96
5.0 7.20 9.18 0.00 2.05 4.23 0.00 93.89 33.60 3.20 1.91 23.47 8.51
80 x 65 4.0 6.18 7.87 0.00 2.22 4.70 0.00 84.43 34.67 3.27 2.10 21.11 8.10
80 x 70 5.0 7.99 10.18 0.00 2.49 5.16 0.00 107.97 51.52 3.26 2.25 26.99 11.42
3.0 5.42 6.90 0.00 2.83 6.11 0.00 79.51 47.24 3.39 2.62 19.88 9.13
80 x 80 4.0 7.12 9.07 0.00 2.88 6.10 0.00 101.77 61.27 3.35 2.60 25.44 11.97
5.0 8.77 11.18 0.00 2.94 6.10 0.00 122.05 74.45 3.30 2.58 30.51 14.71
METRIC SIZE
THICK SECTION CENTER OF CENTER OF MOMENT OF RADIUS OF MODULUS OF
DIMENSION UNIT
NESS AREA GRAVITY SHEAR INERTIA GYRATION SECTION
WEIGHT
HxB t A Cx Cy Sx Sy Ix Iy ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
80 x 85 4.0 7.44 9.47 0.00 3.11 6.58 0.00 107.55 72.31 3.37 2.76 26.89 13.41
90 x 35 4.0 4.61 5.87 0.00 0.94 1.94 0.00 66.16 6.38 3.36 1.04 14.70 2.50
90 x 40 4.0 4.93 6.27 0.00 1.12 2.35 0.00 73.56 9.34 3.42 1.22 16.35 3.25
90 x 45 4.0 5.24 6.67 0.00 1.31 2.78 0.00 80.96 13.03 3.48 1.40 17.99 4.08
4.0 5.55 7.07 0.00 1.50 3.21 0.00 88.36 17.50 3.53 1.57 19.64 5.01
90 x 50
5.0 6.81 8.68 0.00 1.55 3.19 0.00 105.51 21.10 3.49 1.56 23.45 6.12
90 x 55 4.0 5.87 7.47 0.00 1.70 3.65 0.00 95.76 22.83 3.58 1.75 21.28 6.01
90 x 75 4.0 7.12 9.07 0.00 2.55 5.47 0.00 125.37 53.66 3.72 2.43 27.86 10.84
100 x 35 4.0 4.93 6.27 0.00 0.90 1.85 0.00 85.51 6.60 3.69 1.03 17.10 2.53
2.5 3.37 4.29 0.00 1.00 2.27 0.00 63.43 6.42 3.84 1.22 12.69 2.14
3.0 4.01 5.10 0.00 1.02 2.27 0.00 74.41 7.55 3.82 1.22 14.88 2.54
100 x 40
4.0 5.24 6.67 0.00 1.07 2.25 0.00 94.73 9.67 3.77 1.20 18.95 3.30
5.0 6.42 8.18 0.00 1.11 2.24 0.00 112.97 11.6 3.72 1.19 22.59 4.02
TECHNICAL SPECIFICATION
Material : JIS G3101 / ASTM A 36 Non standard length is available request subject to minimum quantity. We provide additional
Symbol : SSC 400 / ASTM A 36 services for standard drilling and punching (for detail, please refer to standard drilling /
Chemical Component : C. 0.25% (Maximum) punching for lip channel data sheet). Shot blasting, painting and galvanizing are available on
P. 0.05% (Maximum) request
S. 0.05% (Maximum)
Technical data : Yield point : 25 kg/mm2 (Minimum)
Tensile Strength : 41-55 kg/mm2
Standard length : 6.00 m
Now, We can produce for additional specification material with metric size :
METRIC SIZE
INFORMATIVE REFERENCE
STANDARD
SECTIONAL CENTER GEOMETRICAL MODULUS
SECTIONAL UNIT RADIUS OF GYRATION
AREA OF MOMENT OF
DIMENSIONS WEIGHT OF AREA
GRAVITY OF INERTIA SECTION
HxB t A Cx=Cy Ix=Iy Max Iu Min Iv ix=iy Max iu Min iv Zx=Zy
2.0 1.52 1.19 1.10 2.44 0.00 4.88 1.27 0.00 1.79 0.84
40 x 40 2.5 1.88 1.47 1.12 2.98 0.00 5.96 1.26 0.00 1.78 1.04
3.0 2.25 1.77 1.14 3.52 5.71 1.33 1.25 1.59 0.77 1.23
2.0 1.92 1.51 1.35 4.85 0.00 9.70 1.59 0.00 2.25 1.33
50 x 50 2.5 2.38 1.87 1.74 5.95 0.00 11.90 1.58 0.00 2.24 1.64
3.0 2.85 2.24 1.39 7.05 11.41 2.69 1.57 2.00 0.97 1.95
2.0 2.32 1.82 1.60 8.48 0.00 16.96 1.91 0.00 2.70 1.93
60 x 60 2.5 2.88 2.26 1.62 10.44 0.00 20.88 1.90 0.00 2.69 2.39
3.0 3.45 2.71 1.64 12.39 20.02 4.76 1.89 2.41 1.17 2.84
70 x 70 3.0 4.05 3.18 1.89 19.92 32.15 7.70 2.22 2.82 1.38 3.90
Non standard length is available request subject to minimum quantity. We provide additional services
for standard drilling and punching (for detail, please refer to standard drilling / punching for lip
channel data sheet) Shot blasting, painting and galvanizing are available on request
TECHNICAL DATA
STANDARD TOLERANCE
Yield Strength Tensile Strength LENGTH (mm)
MATERIAL GRADE
(Fy) (Ft)
Min Min m t H, B
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
PROPERTIES
Standard AS 1397
Width tolerance + 6 mm
Transport height of 24 sheets 275 mm
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
WIDTH WEIGHT
THICKNESS LENGTH
PART NO. TYPE MATERIAL SHEET
mm mm mm Kg
EVG-01 Eave Gutter 553 0.7 3000 9.42
VLG-01 Valley Gutter 1130 0.7 3000 19.23
VLG-02 Valley Gutter 1157 0.7 3000 19.86
EGD-01 Eave Gutter Down Spout 386 0.7 3000 6.57
VGD-01 Valley Gutter Down Spout 816 0.7 3000 13.89
EGD-02 Eave Gutter Down Spout 350 0.7 3000 5.94
VGD-02 Valley Gutter Down Spout 884 0.7 3000 15.03
Valley Gutter Down Spout Outlet
VGDO-01 804 0.7 100 0.46
OTL-01 Eave Gutter Down Spout Outlet 380 0.7 100 0.22
ECS-01 End Closure Type -1 - 0.45 - 0.49
ECS-02 End Closure Type-2 - 0.45 - 0.49
DWS-01 Down Spout Strap 314 0.45 50 0.06
OGS-01 Oasisi Gutter Strap 162 0.45 300 0.18
Down Spout Elbow 135o
DEL-01 396 0.7 260 0.59
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export : 0818-488956
Suwanto skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
Weight Section Area Moment of inertia Section Modulus
Type Size
kg/m cm2 Lx cm4 Ly cm4 Zx cm3 Zy cm3
I-75X75X5X8
I-100X75X5X8
I- 11.9 15.18 15.18 48.3 38.9 12.9
125X75X5.5X9.5 12.9 16.43 16.43 48.3 56.5 12.9
I- 16.1 20.45 20.45 59.0 86.4 15.7
150X75X5.5X9.5 17.1 21.83 21.83 59.1 109 15.8
JIS H-100X100X6X8 17.2 21.90 21.90 134 76.5 26.7
G3192 H-125X60X6X8 13.2 16.84 16.84 29.2 66.1 9.73
H- 31.5 40.14 40.14 563 219 75.1
150X150X7X10 9.36 11.92 11.92 26.9 37.8 7.82
I-100X50X5X7.5 13.4 17.11 17.11 65.5 68.0 14.4
I-125X65X6X8 18.6 23.71 23.71 122 115 23.6
I-
150X75X6.5X10
I-
150X50X3.2X3.2
6.02 7.663 7.663 16.9 32.5 4.37
JIS I-
8.31 10.58 10.58 22.8 43.9 5.99
G3350 150X50X4.5X4.5
10.1 12.83 12.83 71.4 59.8 13.2
I-
150X75X4.5X4.5
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Anton L 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
METRIC SIZE
Sectional Centre of Centre of Moment of Radius of Modulus of
Dimension Thickness Unit Area Gravity Shear Inertia Gyration Section
t Weight
HxBxC A Cx Cy Sx Sy lx ly ix iy Zx Zy
mm x mm mm kg/m cm2 cm cm cm cm cm4 cm4 cm cm cm3 cm3
2.00 3.56 4.54 0 - - 0 - - - - - -
2.30 4.06 5.17 0 1.86 4.4 0 81 19 3.95 1.92 16.1 6.06
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone E-mail (62-21) (62-21) (62-21) (62-21)
Local :
Anton Liong 0818-158041 liong@grdsteel.com 8983-8290 8983-8198 8910-8151 Ext. 6240 890-0555
Siti H 0817-165742 siti@grdsteel.com 8983-8292 8983-8198 8910-8151 Ext.6243 890-0555
Fajar 08179902206 fajar@grdsteel.com 8983-8296 8910-7711 8910-8151 Ext 6247 890-0555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
Resistant
Moment Inertia Gyration Radius
Dimension t Moment
Area (cm4) (cm)
R Weight (cm3)
Section
H B
Ix Iy Zx Zy ix iy
mm mm mm mm kg/m cm2
180 100 6.3 18 25.64 32.33 1.334.99 535.75 148.33 107.15 6.43 4.07
180 100 8.0 18 31.86 40.04 1.598.49 637.47 177.61 127.49 6.32 3.99
180 100 10.0 18 38.80 48.57 1.859.47 736.41 206.61 147.28 6.19 3.89
180 120 6.3 18 27.62 34.85 1.525.15 816.14 169.46 136.20 6.62 4.84
180 120 8.0 18 34.38 43.24 1.835.33 978.44 203.93 163.07 6.51 4.76
180 120 10.0 18 41.94 52.57 2.148.80 1.140.81 238.76 190.13 6.39 4.66
200 100 6.3 18 27.62 34.85 1.739.24 591.15 173.92 118.23 7.06 4.12
200 100 8.0 18 34.38 43.24 2.090.84 705.36 209.08 141.07 6.95 4.04
200 100 9.0 18 38.22 48.67 2.350.00 782.00 235.00 156.00 6.94 4.01
200 100 10.0 18 41.94 52.57 2.444.40 817.74 244.44 163.55 6.82 3.94
250 150 6.3 18 37.52 47.45 4.001.43 1.824.59 320.11 243.28 9.18 6.20
250 150 8.0 18 46.94 59.24 4.885.79 2.219.25 390.86 295.90 9.08 6.12
250 150 10.0 18 57.64 75.27 5.825.01 2.634.20 466.00 351.23 8.96 6.02
250 150 12.0 18 67.92 86.53 6.850.00 3.070.00 548.00 409.00 8.90 5.95
300 200 6.3 18 47.40 60.05 7.624.39 4.103.82 508.29 410.38 11.27 8.27
300 200 8.0 18 59.50 75.24 9.389.27 5.041.67 625.95 504.17 11.17 8.19
300 200 10.0 18 73.34 92.57 11.312.70 6.057.73 754.18 605.77 11.05 8.09
300 200 12.0 18 86.76 110.50 13.400.00 7.110.00 890.00 711.00 11.00 8.02
400 200 6.3 18 57.30 72.56 15.329.74 5.286.10 766.49 528.61 14.53 8.53
400 200 8.0 18 72.06 91.24 18.974.42 6.517.08 948.72 651.71 14.42 8.45
400 200 10.0 18 89.04 112.57 23.002.65 7.864.40 1.150.13 786.44 14.30 8.36
400 200 12.0 18 105.60 134.50 27.300.00 9.230.00 1.360.00 923.00 14.20 8.23
400 300 9.0 18 94.74 119.30 27.600.00 17.800.00 1.380.00 1.190.00 15.20 12.20
400 300 12.0 18 124.44 156.10 35.300.00 22.700.00 1.760.00 1.520.00 15.00 12.10
400 300 16.0 45 162.22 202.80 44.300.00 28.500.00 2.220.00 1.900.00 14.80 11.90
500 300 12.0 18 143.28 180.10 60.600.00 27.700.00 2.420.00 1.850.00 18.30 12.40
500 300 16.0 45 187.74 234.80 76.800.00 35.000.00 3.070.00 2.330.00 18.10 12.20
500 300 19.0 45 220.02 271.80 86.100.00 39.300.00 3.440.00 2.620.00 17.80 12.00
500 400 12.0 18 162.12 204.10 74.900.00 53.400.00 3.000.00 2.670.00 19.20 16.20
500 400 16.0 45 212.86 266.80 95.500.00 68.000.00 3.820.00 3.400.00 18.90 16.00
500 400 19.0 45 249.84 309.80 108.000.00 76.900.00 4.320.00 3.850.00 18.70 15.80
Customer Service :
Notes :
- Standard length 6 m and 12 m
- Thickness max. 25 mm
- Other specification/standard size on request can also be supplied
- Max dimension is 1000 mm x 1000 mm
Standard :
- Specification standard JIS & ASTM
- Material standars SS 400, A36 & GR 50 A,B,C
- Bigger dimension will be produced, if there confirm before.
For further information about this product, please contact : better call by DID
Local Sales :
For further information about this product, please contact : better call by DID
Local Sales :
STANDARD
STANDARD INFORMATIVE
INFORMATIVE REFERENCE
REFERENCEE
SECTIONAL
SECTIONAL UNIT CENTER
CENTER
SECTIONAL
SECTIONAL GEOMETRICALMOMENT
GEOMETRICAL MOMENT RADIUS OF GYRATION
GYRATION MODULUS
AREA
AREA WEIGHT OF
WEIGHT
UNIT OF GRAVITY
GRAVITY RADIUS OF MODULUS
DIMENSIONS
DIMENSIONS OFINERTIA
OF INERTIA OF AREA
AREA OF
OF OF SECTION
SECTION
HxB t A Cx1 Cy1 Ix Iy Min Iu Min Iv ix iy Min iu Min iv Zx Zy
mm mm cm2 kg/m cm cm cm4 cm4 cm4 cm4 cm cm cm cm cm3 cm3
30 x 20 3.0 4.00 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
40 x 30 2.0 4.00 2.46 1.44 31.47 15.57 39.22 7.82 2.59 1.82 2.89 1.29 5.68 3.42
50 x 40 2.0 4.00 2.48 1.46 35.54 17.56 44.32 8.78 2.58 1.81 2.88 1.28 6.44 3.87
60 x 50 2.0 4.00 2.53 1.51 43.38 21.37 54.16 10.59 2.57 1.80 2.87 1.27 7.93 4.76
70 x 60 2.0 4.00 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
80 x 60 3.0 4.05 3.18 2.43 1.42 27.29 13.53 33.99 6.83 2.60 1.83 2.90 1.30 4.90 2.95
80 x 60 3.5 4.70 3.69 2.46 1.44 31.47 15.57 39.22 7.82 2.59 1.82 2.89 1.29 5.68 3.42
80 x 60 4.0 5.34 4.19 2.48 1.46 35.54 17.56 44.32 8.78 2.58 1.81 2.88 1.28 6.44 3.87
80 x 60 5.0 6.59 5.17 2.53 1.51 43.38 21.37 54.16 10.59 2.57 1.80 2.87 1.27 7.93 4.76
100 x 60 3.0 4.56 3.65 3.28 1.25 50.04 14.37 56.20 8.21 3.28 1.76 3.51 1.33 7.44 3.03
100 x 60 3.5 5.40 4.24 3.30 1.28 57.79 16.56 64.93 9.42 3.27 1.75 3.47 1.32 8.63 3.50
100 x 60 4.0 6.14 4.82 3.33 1.30 65.37 18.68 73.46 10.59 3.26 1.74 3.46 1.31 9.80 3.97
100 x 60 5.0 7.59 5.96 3.38 1.34 80.05 22.76 89.99 12.82 3.25 1.73 3.44 1.30 12.10 4.89
100 x 60 6.0 9.01 7.07 3.44 1.38 94.09 26.63 105.82 14.90 3.23 1.72 3.43 1.29 14.33 5.77
100 x 80 3.0 5.25 4.12 2.92 1.91 55.25 32.12 71.79 15.58 3.24 4.27 3.70 1.72 7.80 5.27
100 x 80 3.5 6.10 4.79 2.95 1.93 63.87 37.10 83.05 17.92 3.24 2.47 3.69 1.71 9.05 6.11
100 x 80 4.0 6.94 5.45 2.97 1.95 72.32 41.97 94.10 20.19 3.23 2.46 3.68 1.71 10.29 6.94
100 x 80 5.0 8.59 6.74 3.02 2.00 88.75 51.40 115.61 24.54 3.21 2.45 3.67 1.69 12.71 8.57
100 x 80 6.0 10.21 8.01 3.07 2.04 104.53 60.43 136.32 28.64 3.20 2.43 3.65 1.67 15.08 10.15
150 x 60 3.0 6.15 4.83 5.53 0.98 149.61 15.77 155.08 10.30 4.93 1.60 5.02 1.29 15.79 3.14
150 x 60 3.5 7.15 5.61 5.56 1.01 173.18 18.17 179.50 11.85 4.92 1.59 5.01 1.29 18.34 3.64
150 x 60 4.0 8.14 6.39 5.58 1.03 196.36 20.52 203.53 13.35 4.91 1.59 5.00 1.28 20.86 4.13
150 x 60 5.0 10.09 7.92 5.64 1.07 241.58 25.05 250.39 16.24 4.89 1.58 4.98 1.27 25.81 5.08
150 x 60 6.0 12.01 9.43 5.70 1.11 285.26 29.36 295.64 18.98 4.87 1.56 4.96 1.26 30.67 6.01
150 x 80 3.0 6.75 5.30 5.05 1.52 165.42 35.75 179.67 21.50 4.95 2.30 5.16 1.78 16.62 5.52
150 x 80 3.5 7.85 6.16 5.08 1.54 191.65 41.31 208.17 24.79 4.94 2.29 5.15 1.78 19.31 6.40
150 x 80 4.0 8.94 7.02 5.10 1.56 217.49 46.77 236.26 28.00 4.93 2.29 5.14 1.77 21.97 7.27
150 x 80 5.0 11.09 8.70 5.16 1.60 268.05 57.38 291.24 34.19 4.92 2.27 5.12 1.76 27.23 8.97
150 x 80 6.0 13.21 10.37 5.21 1.65 317.11 67.57 344.60 40.08 4.90 2.26 5.11 1.74 32.39 10.64
120 x 80 4.0 10.94 8.59 7.37 1.31 472.85 49.83 490.14 32.54 6.58 2.13 6.69 1.72 37.44 7.45
120 x 80 5.0 13.59 10.67 7.43 1.36 584.12 61.17 605.45 39.84 6.56 2.12 6.67 1.71 46.46 9.21
120 x 80 6.0 16.21 12.72 7.48 1.40 692.66 72.11 717.94 46.83 6.54 2.11 6.66 1.70 55.34 10.92
TECHNICAL SPECIFICATION
TOLERANCE (mm)
Material : JIS G3350
t H, B Symbol : SSC 41
+ 0.5 +2 Chemical Component : C. 0.25% (Maximum)
P. 0.05% (Maximum)
S. 0.05% (Maximum)
: Yield point : 25 kg/mm2
Technical data
For further information, (minimum)
please contact Gunung : Tensile Strength : 41-55 kg/mm2
Raja Paksi, PT Standard length : 6.00 m
METRIC SIZE
MODULUS
DIMENSION THICKNESS UNIT SECTIONAL
SECTIONAL CENTER
CENTER OFOF MOMENT
MOMENT OF OF RADIUS
RADIUS OF OF OF
DIMENSION THICKNESS UNIT OF
WEIGHT AREA
AREA GRAVITY
GRAVITY INERTIA
INERTIA GYRATION
GYRATION SECTION
WEIGHT SECTION
HxBxC t A Cx Cy Ix Iy ix iy Zx Zy
mm mm kg/m cm2 cm cm cm4 cm4 cm cm cm3 cm3
2 4.25 5.41 0 0 180 36 5.77 2.58 23.99 6
TECHNICAL SPECIFICATION
Material : JIS G3131 / G3101 Non standard length is available request
Symbol : SPHC / SS 400 subject to minimum quantity. We provide
Chemical Component : C. 0.15% (Maximum) additional services for standard drilling and
P. 0.05% (Maximum) punching (for detail, please refer to standard
S. 0.05% (Maximum) drilling / punching for lip channel data sheet).
Shot blasting, painting and galvanizing are
Standard length : 6.00 m available on request
PROFILE SIZE
INTEGRATED FLOOR BEAM
Code
IFB-H x d - t1 x B1 / t2 x B2 - L
Fabrication size
H = 200 - 300 mm
B = 100 - 800 mm
d = 6 - 35 mm
t1/t2 = 8 - 100 mm
U BEAM
Code
UB - H1 x d1 / H2 x d2 - t x B2 - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
L SECTION
Code
LB - H x d - t x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
HSK SECTION (BOX BEAM)
Code
HSK - H x d - t x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
MSI BEAM
Code
MSI - H x d - t1 x B1 / t2 x B2 - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
PROFILE SIZE
I CAMBERED BEAM
Code
ICB - H x d - t1/t2 x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
I TAPERED BEAM
Code
ITB - H1 / H2 x d - t1 / t2 x B - L
Fabrication size
B = 200 - 3200 mm
H = 100 - 800 mm
d = 6 - 35 mm
t = 8 - 100 mm
Note :
a. General specification for rolled steel material refer to JIS G 3101
b. Welded specification refer to JIS G 3106
c. Standard welded process refer to A5.18 (Gas Metal Arc. Welding), A5.1 (Shielded metal Arc. Welding), A5.17 (Submerged
Arc. Welding)
- Local :
Sumarno 0818-125496 sumarno@grdsteel.com 8983-8295 8983-8198 890-1570 Ext. 6246 890-0555
Lisa 0819-702831 sales@grdsteel.com 8983-8161 8983-8298 890-0666 Ext. 6119 890-0555
- Export :
Suwanto 0818-488956 dte@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 890-0555
VERT.
BAR THREAD
RADIUS EMBEDMENT TOTAL ALLOWABLE LOADS
DIAMETER A LENGTH C
(B) LENGTH LENGTH (kN)
NO CODE (D) (B) NUT
(Ld)
PULL
mm mm mm mm mm mm mm TENSION SHEAR
OUT
STD-
M-
1 00- 16 560 100 100 25 460 630 25.21 14.72 25.43
16
IAB016
STD-
M-
2 00- 19 675 125 120 25 550 765 35.55 20.76 36.11
20
IAB019
STD-
M-
3 00- 22 755 125 130 50 630 840 47.67 27.84 47.90
22
IAB022
TECHNICAL SPECIFICATION :
- Standard Material : JIS G 3112 - 1995
- Chemical Symbol : SR 24
- Composition : C :-
Sl : -
Mn : -
P : 0.05% max
S : 0.05% max
Note : Pull out strength is based on 2.0 kN/cm2 concrete compressive strength.
Total length is calculated along the centre-line of bolt.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
METRIC SIZE
THICKNESS HOLE
WEIGHT A Ab B Bb
PART NO. t D
kg mm mm mm mm mm mm
PLB-01 1.03 9 230 85 65 32.5 22
PLB-02 1.72 12 250 85 75 37.5 24
PLB-03 2.33 13 260 85 90 45 26
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
METRIC SIZE
NOTES :
TOLERANCE (mm)
Round bar material Grade SR 24 JIS
Rod G3112
L Dh
Diameter
Tensile strength min = 380 N/mm2
+0.5 +10 +10
Max= 520 N/mm2
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
Deformed
SD 40 390 510 560 - 16 180o d x 2.5 10 to 25 12
Bar
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
inch (mm) mm mm mm kg
1"(25) +1.2 1.83 +0.06 30
1.5"(38) +1.2 2.11 +0.08 30
1.75"(44) +1.8 2.41 +0.08 30
2" (50) +2.1 2.77 +0.08 30
2.5" (63) +2.1 3.05 +0.08 30
3" (76) +2.1 3.40 +0.10 30
3.5" (89) +3.1 3.76 +0.10 30
4" (102) +3.1 4.19 +0.10 30
5" (127) +3.4 4.57 +0.10 30
6" (152) +3.8 5.16 +0.13 30
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
2.77 +0.08
3.05 +0.08
3.40 +0.10
4.19 +0.10
4.57 +0.10
5.16 +0.13
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
Note :
1. Specification
Steel grade of clip :G 300
2. Other standard size on request can also be supplied.
3. Protection corrosion with hot dip galvanizing according to AS 1650
section 5.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
SIZE DIAMETER
TYPE
HEIGHT LENGTH HORIZONTAL VERTICAL
FF 900 0.90 m 2.40 m 6 mm 6 mm
FF 1200 1.20 m 2.40 m 6 mm 6 mm
FF 1500 1.50 m 2.40 m 7 mm 7 mm
FF 1750 1.75 m 2.40 m 7 mm 7 mm
FF 1900 1.90 m 2.40 m 7 mm 7 mm
FF 2100 2.10 m 2.40 m 7 mm 7 mm
FF 2200 2.20 m 2.40 m 7 mm 7 mm
FF 2400 2.40 m 2.40 m 7 mm 7 mm
FF 2500 2.50 m 2.40 m 7 mm 7 mm
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
HEIGHT
TYPE HEIGHT
OF PANEL
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
METRIC SIZE
Diameter
Type of Height of Post
Vertical Horizontal Diagonal
Post
mm mm mm mm
RP 900 1000 6 6 6
RP 1200 1300 8 6 6
RP 1500 1600 8 6 6
RP 1750 1850 10 6 6
RP 1900 2000 10 6 6
RP 2100 2200 12 6 6
RP 2200 2300 12 6 6
RP 2400 2500 12 6 6
RP 2500 2600 12 6 6
Note :
1. Specification
-Steel grade of truss post : SR 24
-Steel grade of steel pipe post : STK 41 According to JIS G3444
2. Other standard size on request can also be supplied.
3. Protection corrosion with hot dip galvanizing according to AS 1650 section 5.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
SG 90 - 1 0.90 m 0.92 m
SG 90 - 2 0.90 m 1.07 m
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
SG 90 - 1 3.00 m 0.92 m
SG 90 - 2 3.00 m 1.07 m
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
SIZE WEIGHT
TYPE DIA. O SPACING SHEET ROLL SHEET ROLL
mm mm m m kg kg
M4 4X4 54 X 2.1 15.45 154.5
M5 5X5 54 X 2.1 24.14 241.4
M6 6X6 54 X 2.1 34.76 347.6
GGPS
& M7 7X7 - 47.31 -
GGUS 150 5.4 X 2.1
M8 8X8 - 61.79 -
M9 9X9 - 78.21 -
M 10 10 X 10 - 96.55 -
M 12 12 X 12 - 139.03 -
M 5 5 X 7 5.4 X 2.1 35.44 354.00
GGPI
& M 6 6 X 7 100 X 200 5.4 X 2.1 43.50 435.00
GGUI M 7 7 X 7 5.4 X 2.1 - 53.02 -
M 8 8 X 8 - 69.25 -
M 9 9 X 8 - 81.70 -
M5 5X4 5.4 X 2.1 31.60 316.00
M6 6X4 5.4 X 2.1 42.22 422.00
75 X 150
GGPII M7 7X4 5.4 X 2.1 - 54.77 -
M8 8X5 - 73.45 -
M9 9X5 - 89.86 -
M8 8X5 - 73.45 -
GGUII 75 X 150 5.4 X 2.1
M9 9X5 - 89.86 -
Specification
STANDARD SIZE
Length Width Wire diameter
Type
m m mm
Roll 54 2.1 4 to 12
TOLERANCE OF SIZE AND WEIGHT
Length Width Diameter Weight
Type
mm mm mm %
Sheet + 25 +5 + 0.4 +7
Roll + 250 +5 + 0.4 +7
MECHANICAL PROPERTIES
N/mm2 % N/mm2
U-50 490 30 250
WIRE MESH
STANDARD SIZE WIRE MESH AREA
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Awie 0812-8689867 awie@grdsteel.com 89838-280 89838-288 8901978 Ext 6300 8900-555
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555
METRIC SIZE
NOTE :
1. Other specification / standard size on request can also be supplied.
2. Out-of-Round is defined as the difference between the maximum and
the minimum values of diameter at the same cross section of the wire
rod.
For further information about this product, please contact : better call by DID
DID Phone DID Fax IDD Phone IDD Fax
Name Handphone e-mail
(62-21) (62-21) (62-21) (62-21)
Local :
Herman 0812-9631152 herman@grdsteel.com 8983-8031 8983-8188 8910-8153 Ext 6155 8900-555
Achai 0811-925044 achai@grdsteel.com 8983-8180 8983-8188 8910-8153 Ext 6151 8900-555
Freddy 0812-8689867 freddy@grdsteel.com 8983-8181 8983-8188 8910-8153 Ext 6150 8900-555
Tody 0817-719909 tody@grdsteel.com 8983-8191 8983-8198 890-1570 Ext 6201 8900-555
Export :
Suwanto 0818-488956 skamaruddin@grdsteel.com 8983-8032 8983-8138 8910-8040 Ext. 3320 8900-555