Professional Documents
Culture Documents
The BCM supplies various conveniences for drivers and is applied to many vehicles. It is well familiar
with us for many aspects including functional questions and malfunction examples. The BCM controls
the body electrical system.
New functions controlled by the BCM are, for example, the driver seat belt warning control, turn signal
lamp control, head lamp control are supplemented.
In addition, Users option by which conveniences can be set to drivers inclination items for easy
checking using Hi-scan pro. Therefore, it will be possible to perform maintenances by more accurate
diagnosis.
Warning lamp Power window
control control
Switch illumination
control Tail auto cut control
On
IGN.
switch Off
Washer Off
switch On
Wiper On
relay
Off
T1: 0.2sec. T2: 0301 sec. T3: 2.5 ~ 3.8 sec. (2~3 rotate)
(3) If washer switch is ON over than T1 during operating by INT. switch the operation mentioned in (2)
is performed. If it is ON for T6, then the operation mentioned in (1) is performed.
Washer Off
switch On
Wiper On
relay Off
T1: 0.2 sec.(Min) T2: 030.1 sec. T3: 2.5 ~ 3.8 sec. (2~3 rotate)
T5: INT. time T6: 0.20.59 sec. T7: 0.70.1sec.
On
IGN 2
Off
On
INT. wiper switch
Off T1
On
Wiper relay .
Off
T3 T2
(1) When rear washer switch Input is 0.3 seconds or more at ignition switch is on condition, rear wiper
relay is turned on directly after 0.6 seconds at the time that rear washer switch is on and is turned
OFF after operating 2.5s~3.8s(2~3 Times) from rear washer switch is turned off.
On
IGN.
switch Off
Washer Off
switch On
Wiper On
relay
Off
T1: 0.6sec. T2: 0301 sec. T3: 2~3 rotate
On
IGN 2
Off
On
INT. wiper switch
Off T1
On
Wiper relay .
Off
T2
9 Chonan Technical Service Training Center
ED BCM
Ignition On
Switch Off
Alternator On
L Signal Off
Defogger On
Switch Off
Defogger On
Relay Off
On
Alternator
Off
L signal
On
Front deicer
Off
switch
Front deicer On
T1 T1
relay Off
Tail lamp On
switch
Off
Tail lamp On
relay Off
Chonan Technical Service Training Center 12
ED BCM
Ignition On
switch Off
Driver or On
passenger
Off
door switch
Keyhole On
illumination Off
T1: 301 seconds
(1) Rear fog relay is turned on if rear fog switch is pushed under head lamp is turned on or front fog
lamp is turned on after ignition switch is on and tail lamp is turned on condition.
(2) Rear fog lamp is turned off if rear fog lamp switch is pushed again.
(3) Rear fog relay is turned off unless the condition of IGN=on, tail lamp=on & head lamp=on (or front
fog lamp=on) is met.
Ignition On
switch Off
Head lamp or
On
front fog lamp
switch Off
Rear fog On
lamp switch
Off
13 Chonan Technical Service Training Center
ED BCM
Rear fog On
lamp
Off
Lock
Transmitter
Unlock
Driver door On
key lock
switch Off
Driver door On
key unlock
switch Off
Door lock On
relay Off T1 T1 T1
Door lock On
indicator Off
Door unlock On
relay Off T1 T1 T1
2.9.2 The reminder unlock function by central door lock switch, keyless or door key
(1) When door unlock switch is turned to Lock when ignition key is removed from the key cylinder and
driver door is opened by central door lock / unlock switch, keyless or door key switch, the door
unlock relay outputs for 1sec after 0.5sec.
Key warning In
switch Out
Door Open
switch Close T4
T4
Unlock
Door lock
switch Lock
T1
T1 T1
Unlock output On
Off
T2 T2 T2
IGN Key On
Warning Switch Off
Driver,
Open
Passenger
door switch Close
Driver, Unlock
Passenger Lock
door lock switch
15 Chonan Technical Service Training Center
ED BCM
Unlock On
relay Off
4 times
T1:0.5sec T2: 10.2sec T3:0.50.1s T4 : 0.50.1s
Ignition On
Switch Off
Unlock On
Relay Off
T1: 200ms T2: 40 ms T3: 50.5S
2.9.5 Speed sensing auto door lock
(1) If the vehicle speed is faster than 40km/h over 1sec, then door lock output is performed. However,
if all doors are locked already or all doors are in failure, then the lock output is not performed.
(2) If any one door is unlocking state after the lock output of 1) is performed, the lock output is
performed at most 3 times.
(3) After the 3 times outputs, if it is still in unlock state, the door is treated as in failure. The failure door is clear
when ignition switch is off.
Ignition On
Switch Off
UnlockCenter
Chonan Technical Service Training 16
Lock
ED BCM
All Door
Lock Switch
On
Off
T1: 2~3sec
Relay 1 On
Off T1
On T1 T2 T1
Relay 2
Off
Relay 3 On T1
Off
T20.2s0.05s
T10 5s0 1s
Ignition On
Switch Off
Driver or
Passenger Open
Door Switch Close
Power
On
Window
Relay Off
IGN 1 signal On
Off
On
Tail lamp
relay Off
Front fog On
lamp switch Off
On
IGN1 SW
Off
H/Lamp On
Switch Off
Driver Open
door
switch Close
H/Lamp On
relay Off
30sec3sec
< Case 2 >
On
IGN 1 SW
Off
Auto light On
switch Off
H/Lamp On
relay Off
30 3
On
IGN1 SW
Off
H/Lamp SW On
Off
H/Lamp On
relay Off
30 3
On
IGN1 SW
Off
Auto light On
switch Off
H/Lamp On
relay Off
< 5Min 5Min
On
IGN1 SW
Off
Auto light On
switch Off
Open
Driver door
Close
switch
H/Lamp On
relay Off
5 Min
On
IGN 2
Off
On
Alternator L
Off
On
Headlamp
Off
relay
T/Lamp On
switch Off
On
H/Lamp
Off
switch
On
Tail lamp
Off
relay
On
IGN 2 Off
On
Alternator L
Off
Headlamp On
Relay Off
T/Lamp On
switch Off
H/Lamp On
switch Off
Tail lamp On
relay Off
On
Mode Alarm mode
Off
Open
All door
switches Close
Start inhibit On
relay Off
Burglar alarm On
horn relay Off
Hazard lamp On
relay Off
T1:272 sec T2 : 101sec
Event Action
* All doors are closed (includes hood and tailgate). * Vehicle goes to arm mode 30 sec later.
* Pressed transmitter door lock button. * Horn & hazard lamp: works 1time
within 30 sec.
DISARM
Door, Hood or tailgate: open
Event Action
30 sec. later
AUTO LOCK TIMER 1 ARM
ARM
Event Action
* All doors are closed * After 30 sec. later, all doors will be locked
* Hood and tailgate are opened. (relock) and the vehicle goes to arm wait
* Pressed transmitter door unlock button. if hood or tailgate closed.
ARM
2.15.9 Rearm
Event Action
3 times PREARM
(1) Ignition key switch is turned off condition, door unlock is restricted by central door lock switch if all
doors are locked & closed when transmitter lock button was pressed.
(2) Ignition key switch is turned off condition, door unlock is restricted by central door lock switch if all
doors are locked & closed when driver door was turned to lock by driver door key switch.
(3) The restricted function of unlock is canceled when TX unlock signal output during the restricted
function of central door lock switch.
(4) The restricted function of unlock is canceled when door unlock signal output during the restricted
function of central door lock switch.
Lock
Transmitter or key
Unlock
All door Lock
states Unlock
Central Lock
door lock
switch
Unlock
At ignition key is removed from the key cylinder state, the security
Disarm
Indicator will be operated with on and off.
Arm The indicator will be on for 0.3 seconds and off for 2 seconds.
Alarm The indicator will be on for 0.3 seconds and off for 2 seconds.
Arm wait The security indicator will be on.
Rearm The indicator will be on for 0.3 seconds and off for 2 seconds.
Auto lock timer 1 The indicator will be on for 0.3 seconds and off for 2 seconds.
Auto lock timer 2 The indicator will be on for 0.3 seconds and off for 2 seconds.
Auto lock timer 3 The indicator will be on for 0.3 seconds and off for 2 seconds.
Pre arm The indicator will be on for 0.3 seconds and off for 2 seconds.