Professional Documents
Culture Documents
VolumeShaper 4 Manual
[2]
[3]
These feature descriptions will give you an idea of what VolumeShaper is. But demos speak
louder than words, so please download the free trial while you're reading.
http://www.cableguys.com/volumeshaper4manual.html 1/7
23/2/2017 Cableguys|AudioPlugins
Draw waveforms with ease and precision. Create smooth bezier curves, peaks, cuts and slopes
using soft or hard breakpoints, producing gentle transitions or sharp bends in the waveform. As
with all Cableguys plugins, VolumeShaper's waveform editing offers great exibility and excels
the automation functionality of most DAWs.
From precise control to uid ow all the details of wave editing with Cableguys plugins in
under 4minutes: This video covers it all:
Tip: You can also see most of the editing options from within the software when you click the
Cableguys logo.
http://www.cableguys.com/volumeshaper4manual.html 2/7
23/2/2017 Cableguys|AudioPlugins
A row of buttons below the waveform lets you delete selected points (or all points, if none are
selected), activate steps drawing, activate snap-to-grid, randomize points (only existing points
will be randomized), move the waveform left or right (shift-click for smaller steps), or undo +
redo your edits.
Oscilloscope
A sample-accurate oscilloscope displays the incoming and processed audio signal, so you can
see exactly where to draw the curve for faster and more accurate edits. You can
enable/disable the left and right channel separately or freeze the oscilloscope in the additional
editing menu (right-click in the waveform editor).
Knobs
SHIFT-click on a knob for precise adjustments, double-click on it for setting the default value.
http://www.cableguys.com/volumeshaper4manual.html 3/7
23/2/2017 Cableguys|AudioPlugins
To listen only to the output signal of the selected band, just hit the solo button.
The magni er opens an enlarged window of the spectrum for more detailed settings.
The exact split frequencies are shown in the info box on the bottom of the plugin when you
mouse-over the band split.
Waveform buttons
Mix knob
Control the overall effect of VolumeShaper.
This LFO can take you places. Set it free-running, synced to the beat of your sequencer or
synced to the frequency of a note you're playing, from long, evolving LFO lengths right up to
the audible range.
With the synced modes, the position of the LFO is always synced with the position of the DAW.
If you're moving the play position in your DAW, the LFO will adjust its position accordingly.
http://www.cableguys.com/volumeshaper4manual.html 4/7
23/2/2017 Cableguys|AudioPlugins
With the 1-Shot modes, the LFO runs exactly once when VolumeShaper receives a MIDI note,
and it will remain at the end value of the waveform (if the waveform ends at the bottom, the
volume will stay there, if it ends at the top, the volume will be up).
With Pitch->Rate the LFO speed will be set to the frequency of the note that you play, so it can
be used for ring modulation - or to match the speed of the oscilloscope to your notes, which is
very useful if you want to monitor a synth for example.
When you route MIDI to VolumeShaper, please use the VST version (not the AU version). Only
with VST you can route MIDI directly via your DAW (if your DAW supports this), without the
need of virtual MIDI ports.
Note that Ableton Live has a massive bug concerning timing, and all position-synced plugins
can suffer from this. For more info on that, see our FAQ page[5] and search for "PDC".
MIDI triggering
VolumeShaper is an audio effect, but can receive MIDI from your DAW
or any virtual or physical MIDI port, and you can choose to trigger the LFO on any notes or to
limit it to a single note.
MIDI triggering is available when you set your LFO to one of the "MIDI Triggered" or "MIDI 1-
Shot" modes. Then, click the small option icon in the LFO area.
Extremely useful. For example, set it to retrigger the LFO when you play a note perfect for
de ning the volume envelope of your synths and drum players. You can even set the LFO to the
frequency of the note that you play.
http://www.cableguys.com/volumeshaper4manual.html 5/7
23/2/2017 Cableguys|AudioPlugins
In most DAWs, it's relatively simple to route MIDI to VolumeShaper for MIDI triggering. But it's
tricky to set up in Logic, and so we've solved it for you[6].
User-friendly design
All the controls are available within a single window, in a clear, neatly-organized design that
still looks good after many solid hours in the studio.
Library
The library ships with a selection of useful presets. You can save your own and they will be
stored locally on your computer. If you want to, you can sync them to backup them on the
Cableguys server, and you can keep them private or share them with others - but it's up to you,
there's no need to ever connect VolumeShaper to the Internet if you don't want to.
To sync with the server, choose "Sync" from the menu at the right upper corner of the plugin
window.
Parameter automation
From LFO speed to waveform selection, absolutely everything can be automated. You can even
automate the shapes of the waveforms and breakpoint movements for dynamic effects.
Links
1. http://www.cableguys.com/volumeshaper.html
http://www.cableguys.com/volumeshaper4manual.html 6/7
23/2/2017 Cableguys|AudioPlugins
2. http://www.cableguys.com/img/volumeshaper-4/volumeshaper-4-help.png?v=2
3. http://www.cableguys.com/img/volumeshaper-4/volumeshaper-4-help.png?v=2
4. http://www.cableguys.com/img/volumeshaper-4/volumeshaper-4-help.png?v=2
5. http://www.cableguys.com/faq.html
6. http://www.cableguys.com/midi-trigger-in-logic.html
7. http://www.cableguys.com/volumeshaper.html
http://www.cableguys.com/volumeshaper4manual.html 7/7