You are on page 1of 2

Bill of Quantity

Details For The Percentage (%) Rate Tender (As per SOR 15 August- 2013)
District - Ujjain PIU-Ujjain-2 Package No MP - 43-11 (UPG)

No of Roads in Package :- 1 Nos.


Cost of
S. Length
Block Road Name Construction
No. (in km)
(in Lacs)

1 Mahidpur Jarda- Indhokh Road to Arniya Baageda 5.42 139.54 Lacs

Total 5.42 139.54 Lacs


Total Construction Cost 139.54
Total Maintanance Cost 16.25
Grand Total PAC 155.79 Lakh
S. Sor Item no. Item Qty Unit Rate Amount
No.
1 3.1 Scarifying Existing Bituminous Surface to a Depth of 50 mm
A Scarifying the existing Bituminous road surface up to a depth of 50 mm
and disposal of scarified material as directed by Engineer-in-Charge with 3750 sqm
a lift upto 3 m as per Technical Specification Clause 301.4.

2 4.5 Water Bound Macadam Sub-base/base with stone screening


3) WBM Grading 3
Providing, laying, spreading and compacting stone aggregates of specific
sizes to water bound macadam specification including spreading in
uniform thickness, hand packing, rolling with smooth wheel roller 80-100
kN in stages to proper grade and camber, applying and brooming, stone
606.70 Cum
screening/binding material to fill-up the interstices of coarse aggregate,
watering and compacting to the required density Grading 3 as per
Technical Specification Clause 405.

3 15.3 Maintenace of bituminous surface road


iv Repair to pot holes and removal of loose material, trimming of sides,
cleaning of surface by providing Primer coat, tack coat, 20 mm thick pre-
mix carpet material having binder content 3.65% and seal coat type B
specification Clause 1904.2 and compacting with appropriate 97.33 Sqm
compacting equipment
(Note:- This item is aplicable for repairing of pot holes when single pot
hole of size less than 10 sqm is to be repaired)

4 10.14 Speed Braker


Providing and laying rounded hump type of Speed Breaker confirming to
IRC 99 and as per guidelines and drawings of NRRDA circular no. DO
No. P-17019/6/2006/PII Dated 16 Sept 2009, including providing, laying
and compaction of GSB, G II, G III, OGPC, Seal Coat Type B, as per
specifications and appended drawing on both the sides of carriage way
up to formation width maintaining rounded hump type shape with
bituminous mix material i/c providing and painting of black and white
strips, providing and fixing of two no. 600mm equilateral semi reflecting
sign boards, i/c cost of all materials, labour T & P & Machinery etc
complete and as directed by engineer in charge as per relevant clauses
of MORD specifications.

(A) For 7.50 M Formation Width 2 each


5 5.2 Tack Coat
(i) Providing and applying tack coat with Bitumen emulsion (RS-1) using
emulsion distributor at the rate of 0.225 kg per sqm on the prepared
bituminous surface cleaned with Hydraulic broom as per Technical 20325 sqm
Specification Clause 503.
6 5.13 Dense Graded Bituminous Macadam (as per MORTH specification
clause No. 507 complete)
Providing and laying dense graded bituminous macadam with
appropreate batch type HMP using crushed aggregates of specified
grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight
of total mix and filler, transporting the hot mix to work site, laying with a
hydrostatic paver finisher to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specification clause No. 507
complete in all respects.
Grading II layer Thickness (50-75 mm) 1016.25 Cum

00-024file:///var/www/apps/conversion/tmp/scratch_7/347232211.xls
S. Sor Item no. Item Qty Unit Rate Amount
No.
7 5.14 Semi-Dense Bituminous Concrete (as per MORTH specification
clause No. 508 complete)

Providing and laying semi dense bituminous concrete with Appropreate


batch type HMP using crushed aggregates of specified grading,
premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler,
transporting the hot mix to work site, laying with a hydrostatic paver
finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction
as per MORTH specification clause No. 508 complete in all respects

Grading II layer Thickness (25-30 mm) Bitumen (VG-30) 508.125 Cum


8 15.2 (A) Maintenance of Hard shoulder (filling with fresh hard shoulder material)
(ii) Making up loss of material/irregularities on shoulders to the design level
by adding fresh approved hard shoulder material having CBR > 12 and
compacting it with appropriate equipment at OMC upto a lead of 1000 m 20325 Sqm
as per technical specification Clause 1903
9 10.2 Cautionary, mandatory, informatory, direction and place
indentification signs
ii) Semi-Reflective Traffic signs up to 0.90 sqm size board
Providing and erecting cautionary, mandatory, informatory, direction and
place identification of semi reflective sign boards as per IRC-67 made of
2 mm thick M.S. Sheet duly stove enameled paint white colour in front
and grey colour on back with reflective border of 70 mm width and
required message, letters, figures with reflective tape of engineering
grade as per MORD specifications of required shade and colour.
Supported and welded on 47 mm x 47 mm of 12 SWG square tube of
3050 mm height duly strengthened by 25 mm x 5 mm MS flat iron on
edges on back firmly fixed to the ground by means of properly designed
foundations with M-15 grade cement concrete 450 mm x 450 mm x 600
mm, 600 mm below ground level as per approved drawing and Technical
Specification Clause 1701

D 600 mm x 450 mm rectangular 2 each


E 600 mm equilateral & triangle 5 each
10 10.6 (B) Kilometre Stone
Reinforced cement concrete M15 grade kilometre stone/local stone of
standard design as per IRC:8 fixing in position including painting and
printing, etc as per drawing and Technical Specification Clause 1703
(iii) 200 m stone 10 each

Say
Maintenance

Length (T-1 To T-4) For Road Width 7.50 m.


S.NO Rate / km Amount
Year
1 5.42 I ST Year
2 5.42 II ND Year
3 5.42 III RD Year
4 5.42 IV TH Year
5 5.42 V TH Year
Total
Maintenance In Lakhs :-

Total - Work + Maintenance - PAC 155.79 Rs.

General Manager
MPRRDA, PIU -2, Ujjain
Madhya Pradesh

00-024file:///var/www/apps/conversion/tmp/scratch_7/347232211.xls

You might also like